- Freeradius-Users - lists.freeradius.org

avoiding ldap access in authorize
by Fred 30 Sep '11

30 Sep '11

Hi all, When using ldap with freeradius, radiusGroupName attributes can be retrived during execution of ldap module. groupname_attribute = "radiusGroupName" groupmembership_filter = "(&(uid=%{%{Stripped-User-Name}:-%{User-Name}})(objectclass=radiusProfile))" groupmembership_attribute = "radiusGroupName" On debug, we can see : [ldap.nsslab] userPassword -> Password-With-Header == "{SSHA}MLRh2CQVi/UeANla4BjafYcB47FlMzRt" [ldap.nsslab] sambaNtPassword -> NT-Password == 0x3841414442424130303546464439454435354434374332433332434641303433 [ldap.nsslab] sambaLmPassword -> LM-Password == 0x3238353536413643394433433936434244373437433744423436454232453738 [ldap.nsslab] radiusGroupName -> Ldap-Group == "AdminRW" [ldap.nsslab] radiusGroupName -> Ldap-Group == "wifi" [ldap.nsslab] radiusGroupName -> Ldap-Group == "wifipartners" [ldap.nsslab] radiusGroupName -> Ldap-Group == "VpnSSL" If I want to test those values, i used to to something like : if ( Ldap-Group == "AdminRW ) { do something } This makes a new ldap access to be done by the server for an array attribute which has already been retrieved by server. Is there any other way to check those (already retrieved values) without making a new ldap call because of Ldap-Group == "xxx" conditional ? Best regards, Fred

2 1

2.1.12 bug/change in behaviour - un-named server {} blocks no longer work?
by Phil Mayers 30 Sep '11

30 Sep '11

All, For a long time, I have had a config with this: sites-enabled/foo: listen { ... } server { authorize { .. } } sites-enabled/oldfoo: client xxx { virtual_server = oldfoo } server oldfoo { authorize { .. } } That is, an un-named virtual server {} block with the config in it, and an older block which certain clients are hard-coded to. 2.1.12 seems to not process this config; it seems to completely ignore the un-named virtual server config: server { # from file /etc/raddb/macauth.conf modules { } # modules } # server ...and thus nothing works. AFAICT this is a change from 2.1.10/11 (although I was always running a "pre-release" i.e. a known-good commit) Removing the un-named: server { } enclosing blocks makes everything work again. I haven't had time to hunt down the commit which might have changed this, but just a heads-up.

4 4

Dear Expert (Installation Request)
by sekchel lee 30 Sep '11

30 Sep '11

Dear Expert(Installation Request) Cent5 (server) Freeradius cent5(NAS1) pptp,oepnvpn The expenses will be paid by US dollar mailto:sekchel@gmail.com <sekchel(a)gmail.com> My current status ---------------------------------------------------------------------------------- cent5 install yum update yum install net-snmp net-snmp-devel mysql-devel libtool-ltdl-devel php-mysql #Because of dialup ---- # wget freeradius2-2.1.7-7.el5.src.rpm # cp freeradius2-2.1.7-7.el5.src.rpm/dialup_admin /usr/local yum search freeradius* yum install freeradius2-mysql yum instal freeradius2-utils show variables like 'have_innodb'; check ok create database radius; vi /etc/raddb/sql/ndb/admin.sql (radiusid/test1234) mysql -u root -p mysql < /etc/raddb/sql/ndb/admin.sql mysql -u root -p radius < /etc/raddb/sql/ndb/schema.sql mysql -u root -p radius < /etc/raddb/sql/mysql/cui.sql mysql -u root -p radius < /etc/raddb/sql/mysql/ippool.sql mysql -u root -p radius < /etc/raddb/sql/mysql/nas.sql mysql -u root -p radius < /etc/raddb/sql/mysql/wimax.sql vi /etc/raddb/sql.conf login = "radiusid" password = "test1234" vi /etc/raddb/radiusd.conf proxy_requests = no $INCLUDE sql.conf #remove $INCLUDE sql/mysql/counter.conf #remove $INCLUDE sqlippool.conf #remove vi /etc/raddb/sqlippool.conf $INCLUDE sql/mysql/ippool.conf <== edit vi /etc/raddb/client.conf client xx0.x7.1xx.xx4 { ipaddr = xx0.x7.1xx.xx4 secret = test1234 require_message_authenticator = no nastype = other # localhost isn't usually a NAS... } ln -s /usr/local/dialup_admin/htdocs /var/www/html/dialup <Directory /var/www/html/dialup> AuthName "Restricted Area" AuthType Basic AuthUserFile /var/www/.htpasswd require valid-user </Directory> htpasswd -cm /var/www/.htpasswd administrator mysql -u root -p radius < /usr/local/dialup_admin/sql/mysql/badusers.sql mysql -u root -p radius < /usr/local/dialup_admin/sql/mysql/mtotacct.sql mysql -u root -p radius < /usr/local/dialup_admin/sql/mysql/totacct.sql mysql -u root -p radius < /usr/local/dialup_admin/sql/mysql/userinfo.sql ( id int(10) NOT NULL auto_increment,) vi /etc/httpd/conf.d/php.conf #AddType application/x-httpd-php-source .phps #LoadModule php4_module libexec/libphp4.so #AddModule mod_php4.c AddType application/x-httpd-php .php AddType application/x-httpd-php .php3 vi /usr/local/dialup_admin/conf/admin.conf general_radiusd_base_dir: /usr/sbin Edit general_strip_realms: yes # remove sql_username: radiusid sql_password: test1234 #sql_debug: true NAS1 ==> client xx0.x7.1xx.xx4 pptpd-1.3.4.tar.gz freeradius-client-1.1.6.tar.gz openvpn-2.2.1.tar.gz radiusplugin_v2.1a_beta1.tar.gz openvpn-gui http://www.openvpn.se/files/install_packages_source/ Dependent(tap0901,auth-user-pass auth-user-pass.txt) nas1 ip_range xx0.x7.1xx.xx5-60 (public ip)

2 1

None
by michael lamborn 29 Sep '11

29 Sep '11

http://bestserv.ae/go.php

1 0

FreeRADIUS 1.1.3 syslog and radacct question
by Tremaine Lea 29 Sep '11

29 Sep '11

I have a requirement to get successful and failed radius authentication logs from FreeRADIUS to a SIEM for audit purposes. I have updated the config to log to syslog, but I need more information than is currently appearing. Example: Sep 29 10:40:56 radiusserver radiusd[13806]: Login incorrect: [azbycx] (from client ScreenNets port 0) Is there a way to syslog the username, client-ip-addres and calling-station-id that appears in radacct? Alternately, is there a way to send radacct to syslog instead of the file system? In my ideal world, all of the information currently recorded for radacct would be logged to the SIEM but I'm not sure how to best achieve that. I've been through the documentation and just am not finding an obvious way to change what information is sent to syslog. Any help/suggestions would be much appreciated. Tremaine Lea Network Security Consultant Intrepid ACL "Paranoia for hire"

2 2

Authentications types by usernames
by andreapepa 29 Sep '11

29 Sep '11

Hi All, I'm using Freeradius 2.1, Users that connects to the my network by wireless clients at 2.4GHz get authenticated by username and password, but there also CPE that connect at 5GHz and authenticate thelmselves by username and EAP to give access to wired lan users ( not supplicant ). Is it possible to deny usernames used by cpe on the 2.4GHz net? Can i force username used on cpe only to pass the EAP auth too? if yes..how? it'a matter of policy.conf? Thanks -- View this message in context: http://freeradius.1045715.n5.nabble.com/Authentications-types-by-usernames-… Sent from the FreeRadius - User mailing list archive at Nabble.com.

3 8

Reverting Accept-Reject to Access-Accept
by denizaydin 29 Sep '11

29 Sep '11

Hi, I am using Version 2.1.11 for broadband PPP authentication. I want to put the unauthenticated users to a default service. I have to revert the access-reject message to access-accept because once CISCO ISG get a access-reject from the AAA server it's terminating the ppp with access-reject. I tried to use Post-Auth-Type REJECT section of the configuration but its not working. Here is my config and some debug outputs. post-auth { Post-Auth-Type REJECT { ok update control { Auth-Type:=Accept } } } ....(AFTER SQL Lookup) [sql] User ccotesist06adsl not found ++[sql] returns notfound Found Auth-Type = PAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group PAP {...} [pap] login attempt with password "test" [pap] No password configured for the user. Cannot do authentication ++[pap] returns fail Failed to authenticate the user. Using Post-Auth-Type Reject # Executing group from file /etc/raddb/sites-enabled/default +- entering group REJECT {...} ++[ok] returns ok ++[control] returns ok Delaying reject of request 0 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 0 Sending Access-Reject of id 11 Deniz AYDIN Senior Network Engineer ----- Deniz AYDIN Senior Network Engineer -- View this message in context: http://freeradius.1045715.n5.nabble.com/Reverting-Accept-Reject-to-Access-A… Sent from the FreeRadius - User mailing list archive at Nabble.com.

5 12

Communigate with PEAP-MSCHAPv2
by Rosario Lumia 29 Sep '11

29 Sep '11

Hi to all, I have a problem using freeradius 2.1.8. I have an auth server that is a Communigate 5.3 mail server. I'd want my windows clients can use a PEAP/MSCHAPv2 default auth schema but it seems not working. With TTLS/PAP-MSCHAPv1 it works fine (but I have to install SecureW2 software). This is my configuration and the response when I try to connect FreeRADIUS Version 2.1.8, for host x86_64-pc-linux-gnu, built on Jan 5 2010 at 02:56:18 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /etc/freeradius/radiusd.conf including configuration file /etc/freeradius/proxy.conf including configuration file /etc/freeradius/clients.conf including files in directory /etc/freeradius/modules/ including configuration file /etc/freeradius/modules/perl including configuration file /etc/freeradius/modules/ldap including configuration file /etc/freeradius/modules/ntlm_auth including configuration file /etc/freeradius/modules/krb5 including configuration file /etc/freeradius/modules/wimax including configuration file /etc/freeradius/modules/detail.example.com including configuration file /etc/freeradius/modules/realm including configuration file /etc/freeradius/modules/echo including configuration file /etc/freeradius/modules/exec including configuration file /etc/freeradius/modules/digest including configuration file /etc/freeradius/modules/etc_group including configuration file /etc/freeradius/modules/unix including configuration file /etc/freeradius/modules/counter including configuration file /etc/freeradius/modules/attr_rewrite including configuration file /etc/freeradius/modules/smbpasswd including configuration file /etc/freeradius/modules/logintime including configuration file /etc/freeradius/modules/mschap including configuration file /etc/freeradius/modules/mac2vlan including configuration file /etc/freeradius/modules/chap including configuration file /etc/freeradius/modules/inner-eap including configuration file /etc/freeradius/modules/cui including configuration file /etc/freeradius/modules/expiration including configuration file /etc/freeradius/modules/passwd including configuration file /etc/freeradius/modules/always including configuration file /etc/freeradius/modules/expr including configuration file /etc/freeradius/modules/checkval including configuration file /etc/freeradius/modules/mac2ip including configuration file /etc/freeradius/modules/ippool including configuration file /etc/freeradius/modules/policy including configuration file /etc/freeradius/modules/sradutmp including configuration file /etc/freeradius/modules/attr_filter including configuration file /etc/freeradius/modules/radutmp including configuration file /etc/freeradius/modules/acct_unique including configuration file /etc/freeradius/modules/detail.log including configuration file /etc/freeradius/modules/preprocess including configuration file /etc/freeradius/modules/pap including configuration file /etc/freeradius/modules/linelog including configuration file /etc/freeradius/modules/files including configuration file /etc/freeradius/modules/sql_log including configuration file /etc/freeradius/modules/pam including configuration file /etc/freeradius/modules/sqlcounter_expire_on_login including configuration file /etc/freeradius/modules/otp including configuration file /etc/freeradius/modules/detail including configuration file /etc/freeradius/modules/smsotp including configuration file /etc/freeradius/eap.conf including configuration file /etc/freeradius/policy.conf including files in directory /etc/freeradius/sites-enabled/ including configuration file /etc/freeradius/sites-enabled/default including configuration file /etc/freeradius/sites-enabled/inner-tunnel main { user = "freerad" group = "freerad" allow_core_dumps = no } including dictionary file /etc/freeradius/dictionary main { prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 require_message_authenticator = no zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 irt = 2 mrt = 16 mrc = 5 mrd = 30 } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } realm mail.sns.it { authhost = LOCAL accthost = LOCAL } realm mail.sns.it.veramente { authhost = mail.sns.it:1812 secret = XXXXX } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } client test { ipaddr = 192.168.0.0 netmask = 0 require_message_authenticator = no secret = "pulcinella" shortname = "private-network-2" } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating expr Module: Linked to module rlm_expiration Module: Instantiating expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server inner-tunnel { modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating pap pap { encryption_scheme = "auto" auto_header = yes } Module: Linked to module rlm_chap Module: Instantiating chap Module: Linked to module rlm_mschap Module: Instantiating mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no } Module: Linked to module rlm_unix Module: Instantiating unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 4096 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 pem_file_type = yes private_key_file = "/etc/freeradius/certs/server.key" certificate_file = "/etc/freeradius/certs/server.pem" CA_file = "/etc/freeradius/certs/ca.pem" private_key_password = "whatever" dh_file = "/etc/freeradius/certs/dh" random_file = "/etc/freeradius/certs/random" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/etc/freeradius/certs/bootstrap" cache { enable = no lifetime = 24 max_entries = 255 } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating suffix realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Instantiating ntdomain realm ntdomain { format = "prefix" delimiter = "\" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating files files { usersfile = "/etc/freeradius/users" acctusersfile = "/etc/freeradius/acct_users" preproxy_usersfile = "/etc/freeradius/preproxy_users" compat = "no" } Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating attr_filter.access_reject attr_filter attr_filter.access_reject { attrsfile = "/etc/freeradius/attrs.access_reject" key = "%{User-Name}" } } # modules } # server server { modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating preprocess preprocess { huntgroups = "/etc/freeradius/huntgroups" hints = "/etc/freeradius/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating detail detail { detailfile = "/var/log/freeradius/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Instantiating attr_filter.accounting_response attr_filter attr_filter.accounting_response { attrsfile = "/etc/freeradius/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on proxy address * port 1814 Ready to process requests. RESPONSE: rad_recv: Access-Request packet from host 192.168.71.131 port 2048, id=0, length=163 User-Name = "rosario.lumia(a)mail.sns.it" NAS-IP-Address = 192.168.71.131 Called-Station-Id = "00236929d1a4" Calling-Station-Id = "e8e5d6d76775" NAS-Identifier = "00236929d1a4" NAS-Port = 5 Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x0200001e01726f736172696f2e6c756d6961406d61696c2e736e732e6974 Message-Authenticator = 0x0c44b3e602345e27cab38b80d83a991a +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] Looking up realm "mail.sns.it" for User-Name = " rosario.lumia(a)mail.sns.it" [suffix] Found realm "mail.sns.it" [suffix] Adding Stripped-User-Name = "rosario.lumia" [suffix] Adding Realm = "mail.sns.it" [suffix] Authentication realm is LOCAL. ++[suffix] returns ok [ntdomain] Request already proxied. Ignoring. ++[ntdomain] returns ok [eap] EAP packet type response id 0 length 30 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] EAP Identity [eap] processing type md5 rlm_eap_md5: Issuing Challenge ++[eap] returns handled Sending Access-Challenge of id 0 to 192.168.71.131 port 2048 EAP-Message = 0x010100160410b147c10c4e418d94bf9e40ea36334bb3 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x9dd480bf9dd58457068c8abbb9608c64 Finished request 0. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.71.131 port 2048, id=0, length=157 Cleaning up request 0 ID 0 with timestamp +233 User-Name = "rosario.lumia(a)mail.sns.it" NAS-IP-Address = 192.168.71.131 Called-Station-Id = "00236929d1a4" Calling-Station-Id = "e8e5d6d76775" NAS-Identifier = "00236929d1a4" NAS-Port = 5 Framed-MTU = 1400 State = 0x9dd480bf9dd58457068c8abbb9608c64 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x020100060319 Message-Authenticator = 0x1c396e46a4c5ea98691a8ff91ce87893 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] Looking up realm "mail.sns.it" for User-Name = " rosario.lumia(a)mail.sns.it" [suffix] Found realm "mail.sns.it" [suffix] Adding Stripped-User-Name = "rosario.lumia" [suffix] Adding Realm = "mail.sns.it" [suffix] Authentication realm is LOCAL. ++[suffix] returns ok [ntdomain] Request already proxied. Ignoring. ++[ntdomain] returns ok [eap] EAP packet type response id 1 length 6 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP NAK [eap] EAP-NAK asked for EAP-Type/peap [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 0 to 192.168.71.131 port 2048 EAP-Message = 0x010200061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x9dd480bf9cd69957068c8abbb9608c64 Finished request 1. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.71.131 port 2048, id=0, length=255 Cleaning up request 1 ID 0 with timestamp +233 User-Name = "rosario.lumia(a)mail.sns.it" NAS-IP-Address = 192.168.71.131 Called-Station-Id = "00236929d1a4" Calling-Station-Id = "e8e5d6d76775" NAS-Identifier = "00236929d1a4" NAS-Port = 5 Framed-MTU = 1400 State = 0x9dd480bf9cd69957068c8abbb9608c64 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x0202006819800000005e16030100590100005503014e830888e4b3dfeb276293e107afeaa97e182e6a27ec167de337a9456efa4c3500002800390038003500160013000a00330032002f000500040015001200090014001100080006000300ff0100000400230000 Message-Authenticator = 0x0d05314c94d184903b362c2994aefa68 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] Looking up realm "mail.sns.it" for User-Name = " rosario.lumia(a)mail.sns.it" [suffix] Found realm "mail.sns.it" [suffix] Adding Stripped-User-Name = "rosario.lumia" [suffix] Adding Realm = "mail.sns.it" [suffix] Authentication realm is LOCAL. ++[suffix] returns ok [ntdomain] Request already proxied. Ignoring. ++[ntdomain] returns ok [eap] EAP packet type response id 2 length 104 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 94 [peap] Length Included [peap] eaptls_verify returned 11 [peap] (other): before/accept initialization [peap] TLS_accept: before/accept initialization [peap] <<< TLS 1.0 Handshake [length 0059], ClientHello [peap] TLS_accept: SSLv3 read client hello A [peap] >>> TLS 1.0 Handshake [length 0035], ServerHello [peap] TLS_accept: SSLv3 write server hello A [peap] >>> TLS 1.0 Handshake [length 01b7], Certificate [peap] TLS_accept: SSLv3 write certificate A [peap] >>> TLS 1.0 Handshake [length 018d], ServerKeyExchange [peap] TLS_accept: SSLv3 write key exchange A [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [peap] TLS_accept: SSLv3 write server done A [peap] TLS_accept: SSLv3 flush data [peap] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 0 to 192.168.71.131 port 2048 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0xc30bc4c2e9889f3169916942c23a694e787a53c31200803b92d558849d014ad5eb0f41e499c1bfc87336cacddfb5bb02eb846266d0a07a4857a9ce1d952f977a59d18cebacaa1c174d5134d37253b02d82a58a19375b5c90e960ef16829acff3d9c18d24c08a120f5054838c5628e14327751aaff77ee8b0b16e1025dae4abd47bf3d7701bee69a283342f2d428bfdd27b9951e5d4305816030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x9dd480bf9fd79957068c8abbb9608c64 Finished request 2. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.71.131 port 2048, id=0, length=359 Cleaning up request 2 ID 0 with timestamp +233 User-Name = "rosario.lumia(a)mail.sns.it" NAS-IP-Address = 192.168.71.131 Called-Station-Id = "00236929d1a4" Calling-Station-Id = "e8e5d6d76775" NAS-Identifier = "00236929d1a4" NAS-Port = 5 Framed-MTU = 1400 State = 0x9dd480bf9fd79957068c8abbb9608c64 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x020300d01980000000c616030100861000008200806a764749631adc4da713999ef8db804827d1c44fab41d538a3a2755368cebb4f54ca1c87884a37f408c640e4a9a0b93c46c4c683753e3885cacb11c4bdec114b6779981368d4eed97846df5ed9edf392ca2b12c513f9f050a3517cb8b045947207cf052910ad8c41de9b86133e84880f574391d990734cf7f5f1202c5d6fc5121403010001011603010030e1ae24ab53d88f46abc276c57ca5d7a3463ecd8d1cbf242dfed051afd9cd411952a9856ae7b0eccaf6d1bd8b57937e48 Message-Authenticator = 0x1f33307e5bbeb0bf6fb6ea4bc86a2e9f +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] Looking up realm "mail.sns.it" for User-Name = " rosario.lumia(a)mail.sns.it" [suffix] Found realm "mail.sns.it" [suffix] Adding Stripped-User-Name = "rosario.lumia" [suffix] Adding Realm = "mail.sns.it" [suffix] Authentication realm is LOCAL. ++[suffix] returns ok [ntdomain] Request already proxied. Ignoring. ++[ntdomain] returns ok [eap] EAP packet type response id 3 length 208 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 198 [peap] Length Included [peap] eaptls_verify returned 11 [peap] <<< TLS 1.0 Handshake [length 0086], ClientKeyExchange [peap] TLS_accept: SSLv3 read client key exchange A [peap] <<< TLS 1.0 ChangeCipherSpec [length 0001] [peap] <<< TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 read finished A [peap] >>> TLS 1.0 Handshake [length 00aa]??? [peap] TLS_accept: SSLv3 write session ticket A [peap] >>> TLS 1.0 ChangeCipherSpec [length 0001] [peap] TLS_accept: SSLv3 write change cipher spec A [peap] >>> TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 write finished A [peap] TLS_accept: SSLv3 flush data [peap] (other): SSL negotiation finished successfully SSL Connection Established [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 0 to 192.168.71.131 port 2048 EAP-Message = 0x010400f0190016030100aa040000a60000000000a00a5ac7005d9fb7fd360f0698407d4c96c4a45ea1c55004f204bdaf79ca75e4230e9186bb5edc0458bd88c153d4ced453a03e24db5c1444dc34abeb1b660e674950a83e1052aea8fe5d5988abeb7f6beac2c3a2de36ce3cab2d7c67a8d55bbee5aa5c9641b950975651dcd5fb3d62af93725ef13d87166e6c02770265b65bbc391850c49a64c4eb6b355492eff70d12f32ef2994142b0bf3f4740608e8c32eb5a14030100010116030100301c75d8374b982475d21bbdb68c05936c0fc1f364bdcf1ded90bb9c9d8f6b7f1a8b8a57822fc7dcdca101726fe126403a Message-Authenticator = 0x00000000000000000000000000000000 State = 0x9dd480bf9ed09957068c8abbb9608c64 Finished request 3. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.71.131 port 2048, id=0, length=157 Cleaning up request 3 ID 0 with timestamp +234 User-Name = "rosario.lumia(a)mail.sns.it" NAS-IP-Address = 192.168.71.131 Called-Station-Id = "00236929d1a4" Calling-Station-Id = "e8e5d6d76775" NAS-Identifier = "00236929d1a4" NAS-Port = 5 Framed-MTU = 1400 State = 0x9dd480bf9ed09957068c8abbb9608c64 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x020400061900 Message-Authenticator = 0xef939c3535dd70c46519b41cb657d39c +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] Looking up realm "mail.sns.it" for User-Name = " rosario.lumia(a)mail.sns.it" [suffix] Found realm "mail.sns.it" [suffix] Adding Stripped-User-Name = "rosario.lumia" [suffix] Adding Realm = "mail.sns.it" [suffix] Authentication realm is LOCAL. ++[suffix] returns ok [ntdomain] Request already proxied. Ignoring. ++[ntdomain] returns ok [eap] EAP packet type response id 4 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake is finished [peap] eaptls_verify returned 3 [peap] eaptls_process returned 3 [peap] EAPTLS_SUCCESS ++[eap] returns handled Sending Access-Challenge of id 0 to 192.168.71.131 port 2048 EAP-Message = 0x0105002b19001703010020a865949ad5d50b0e2da3b601d836a5db44849d139e7ac2e4fadbd2a84436eef3 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x9dd480bf99d19957068c8abbb9608c64 Finished request 4. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.71.131 port 2048, id=0, length=247 Cleaning up request 4 ID 0 with timestamp +234 User-Name = "rosario.lumia(a)mail.sns.it" NAS-IP-Address = 192.168.71.131 Called-Station-Id = "00236929d1a4" Calling-Station-Id = "e8e5d6d76775" NAS-Identifier = "00236929d1a4" NAS-Port = 5 Framed-MTU = 1400 State = 0x9dd480bf99d19957068c8abbb9608c64 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x020500601900170301002060829614464804e6e47711ef807c4797ffb45a90d923aad46b5e053af710abd717030100306542c1b399f1c075966c709f1364fed0c304601c766d2e908354fee852e9c633744f560aa615550abb254e8f6acfe76c Message-Authenticator = 0x17699948626c902751f348054ed7f05c +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] Looking up realm "mail.sns.it" for User-Name = " rosario.lumia(a)mail.sns.it" [suffix] Found realm "mail.sns.it" [suffix] Adding Stripped-User-Name = "rosario.lumia" [suffix] Adding Realm = "mail.sns.it" [suffix] Authentication realm is LOCAL. ++[suffix] returns ok [ntdomain] Request already proxied. Ignoring. ++[ntdomain] returns ok [eap] EAP packet type response id 5 length 96 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Identity - rosario.lumia(a)mail.sns.it [peap] Got tunneled request EAP-Message = 0x0205001e01726f736172696f2e6c756d6961406d61696c2e736e732e6974 server { PEAP: Got tunneled identity of rosario.lumia(a)mail.sns.it PEAP: Setting default EAP type for tunneled EAP session. PEAP: Setting User-Name to rosario.lumia(a)mail.sns.it Sending tunneled request EAP-Message = 0x0205001e01726f736172696f2e6c756d6961406d61696c2e736e732e6974 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "rosario.lumia(a)mail.sns.it" server inner-tunnel { +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop ++[unix] returns notfound [suffix] Looking up realm "mail.sns.it" for User-Name = " rosario.lumia(a)mail.sns.it" [suffix] Found realm "mail.sns.it" [suffix] Adding Stripped-User-Name = "rosario.lumia" [suffix] Adding Realm = "mail.sns.it" [suffix] Authentication realm is LOCAL. ++[suffix] returns ok [ntdomain] Request already proxied. Ignoring. ++[ntdomain] returns ok ++[control] returns ok [eap] EAP packet type response id 5 length 30 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] EAP Identity [eap] processing type mschapv2 rlm_eap_mschapv2: Issuing Challenge ++[eap] returns handled } # server inner-tunnel [peap] Got tunneled reply code 11 EAP-Message = 0x010600331a0106002e103025f88867b6177e20681b72680d2759726f736172696f2e6c756d6961406d61696c2e736e732e6974 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xf3b625d1f3b03f960f179937a5f9e80a [peap] Got tunneled reply RADIUS code 11 EAP-Message = 0x010600331a0106002e103025f88867b6177e20681b72680d2759726f736172696f2e6c756d6961406d61696c2e736e732e6974 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xf3b625d1f3b03f960f179937a5f9e80a [peap] Got tunneled Access-Challenge ++[eap] returns handled Sending Access-Challenge of id 0 to 192.168.71.131 port 2048 EAP-Message = 0x0106005b1900170301005022bda37f6a7e8eb3bb9d8a945baaafcf72404ca8b67395735c749d53527e3c149e7067addbdbd3df1d788a7257f491271545022ebc4295906bf2f2518880881ac04f0dff9d6852640ccae739f0c49155 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x9dd480bf98d29957068c8abbb9608c64 Finished request 5. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.71.131 port 2048, id=0, length=311 Cleaning up request 5 ID 0 with timestamp +234 User-Name = "rosario.lumia(a)mail.sns.it" NAS-IP-Address = 192.168.71.131 Called-Station-Id = "00236929d1a4" Calling-Station-Id = "e8e5d6d76775" NAS-Identifier = "00236929d1a4" NAS-Port = 5 Framed-MTU = 1400 State = 0x9dd480bf98d29957068c8abbb9608c64 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x020600a019001703010020f38b245f8a4ba2c32c11d311a30ec5468f90a3e93b949d95fe62f6245a8e2fdf17030100705d20747f5666db6644551bdb05c49f5d386b9a33e685b2ba9d5bb5f1fad85716c350c2f470171ecc4b318ef39c623c100d584d4c7a05aae14f25ee4799a730e73d57f5028ebccf9812ed150573069f4873fffac3e8c77408b541eb103166b7ae0ad38ae356d6dadb1ecef633c05b174b Message-Authenticator = 0xb698d82a5c553ea8ce3aa6df65d772cf +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] Looking up realm "mail.sns.it" for User-Name = " rosario.lumia(a)mail.sns.it" [suffix] Found realm "mail.sns.it" [suffix] Adding Stripped-User-Name = "rosario.lumia" [suffix] Adding Realm = "mail.sns.it" [suffix] Authentication realm is LOCAL. ++[suffix] returns ok [ntdomain] Request already proxied. Ignoring. ++[ntdomain] returns ok [eap] EAP packet type response id 6 length 160 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] EAP type mschapv2 [peap] Got tunneled request EAP-Message = 0x020600541a0206004f313b4861962778fb4f6155136de4c9ee6900000000000000004b32d3bb55eb0f1b839631b8af05b76b74d60b6070c49e4600726f736172696f2e6c756d6961406d61696c2e736e732e6974 server { PEAP: Setting User-Name to rosario.lumia(a)mail.sns.it Sending tunneled request EAP-Message = 0x020600541a0206004f313b4861962778fb4f6155136de4c9ee6900000000000000004b32d3bb55eb0f1b839631b8af05b76b74d60b6070c49e4600726f736172696f2e6c756d6961406d61696c2e736e732e6974 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "rosario.lumia(a)mail.sns.it" State = 0xf3b625d1f3b03f960f179937a5f9e80a server inner-tunnel { +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop ++[unix] returns notfound [suffix] Looking up realm "mail.sns.it" for User-Name = " rosario.lumia(a)mail.sns.it" [suffix] Found realm "mail.sns.it" [suffix] Adding Stripped-User-Name = "rosario.lumia" [suffix] Adding Realm = "mail.sns.it" [suffix] Authentication realm is LOCAL. ++[suffix] returns ok [ntdomain] Request already proxied. Ignoring. ++[ntdomain] returns ok ++[control] returns ok [eap] EAP packet type response id 6 length 84 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/mschapv2 [eap] processing type mschapv2 [mschapv2] +- entering group MS-CHAP {...} [mschap] No Cleartext-Password configured. Cannot create LM-Password. [mschap] No Cleartext-Password configured. Cannot create NT-Password. [mschap] Told to do MS-CHAPv2 for rosario.lumia(a)mail.sns.it with NT-Password [mschap] FAILED: No NT/LM-Password. Cannot perform authentication. [mschap] FAILED: MS-CHAP2-Response is incorrect ++[mschap] returns reject [eap] Freeing handler ++[eap] returns reject Failed to authenticate the user. } # server inner-tunnel [peap] Got tunneled reply code 3 MS-CHAP-Error = "\006E=691 R=1" EAP-Message = 0x04060004 Message-Authenticator = 0x00000000000000000000000000000000 [peap] Got tunneled reply RADIUS code 3 MS-CHAP-Error = "\006E=691 R=1" EAP-Message = 0x04060004 Message-Authenticator = 0x00000000000000000000000000000000 [peap] Tunneled authentication was rejected. [peap] FAILURE ++[eap] returns handled Sending Access-Challenge of id 0 to 192.168.71.131 port 2048 EAP-Message = 0x0107002b1900170301002014144525592c90d11a4fffed6af1b8a86fbd0f0aa4e1183beec57a73002d68df Message-Authenticator = 0x00000000000000000000000000000000 State = 0x9dd480bf9bd39957068c8abbb9608c64 Finished request 6. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.71.131 port 2048, id=0, length=231 Cleaning up request 6 ID 0 with timestamp +234 User-Name = "rosario.lumia(a)mail.sns.it" NAS-IP-Address = 192.168.71.131 Called-Station-Id = "00236929d1a4" Calling-Station-Id = "e8e5d6d76775" NAS-Identifier = "00236929d1a4" NAS-Port = 5 Framed-MTU = 1400 State = 0x9dd480bf9bd39957068c8abbb9608c64 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x02070050190017030100209504be9fbeeaf7e9938c4381f5a2c07d40e9fc9329c858bfa8290dbaece688cc170301002059a912cbd613fdf127f5994477421b08aa7ed0b1754001f54b31ad2faf777dfe Message-Authenticator = 0x93d185379d826e86b0379af4a516b144 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] Looking up realm "mail.sns.it" for User-Name = " rosario.lumia(a)mail.sns.it" [suffix] Found realm "mail.sns.it" [suffix] Adding Stripped-User-Name = "rosario.lumia" [suffix] Adding Realm = "mail.sns.it" [suffix] Authentication realm is LOCAL. ++[suffix] returns ok [ntdomain] Request already proxied. Ignoring. ++[ntdomain] returns ok [eap] EAP packet type response id 7 length 80 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Received EAP-TLV response. [peap] Had sent TLV failure. User was rejected earlier in this session. [eap] Handler failed in EAP/peap [eap] Failed in EAP select ++[eap] returns invalid Failed to authenticate the user. Using Post-Auth-Type Reject +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> rosario.lumia(a)mail.sns.it attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 7 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 7 Sending Access-Reject of id 0 to 192.168.71.131 port 2048 EAP-Message = 0x04070004 Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 4.9 seconds. Cleaning up request 7 ID 0 with timestamp +234 Ready to process requests. -- Rosario L.

2 5

rlm_ldap & access_attr
by Fred 29 Sep '11

29 Sep '11

Hi all, I am using FR 2.1.11 and I try to implement access_attr & access_attr_used_for_allow with rlm_ldap. modules/ldap.conf : .... access_attr = inetUserStatus access_attr_used_for_allow = yes compare_check_items = no do_xlat = yes set_auth_type = yes ... Inside our OpenLDAP, the attribute is inetUserStatus, whose value can be(active/inactive). According to rlm_ldap docs, this should be a boolean (yes/no/TRUE/FALSE). At the moment, access is granted if inetUserStatus is set to active as well as if inetUserStatus is set to inactive, I suppose because FR does not interpred those values as TRUE/yes or FALSE/no .. As I cannot act on ldap server side, (many other applications already uses this attribute value pair) Is there any way to have this working on freeradius side ? Is it necessary to ldap.attrmap this attribute to use this feature ? Could I (for example) update the attribute recovered from ldap during author and change inactive to FALSE or active to TRUE ? debug extract : Fri Sep 23 12:54:05 2011 : Info: [ldap] performing user authorization for user_sps Fri Sep 23 12:54:05 2011 : Info: [ldap] expand: %{Stripped-User-Name} -> Fri Sep 23 12:54:05 2011 : Info: [ldap] ... expanding second conditional Fri Sep 23 12:54:05 2011 : Info: [ldap] expand: %{User-Name} -> user_sps Fri Sep 23 12:54:05 2011 : Info: [ldap] expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) -> (uid=user_sps) Fri Sep 23 12:54:05 2011 : Info: [ldap] expand: dc=corp,dc=toto,dc=com -> dc=corp,dc=toto,dc=com Fri Sep 23 12:54:05 2011 : Debug: [ldap] ldap_get_conn: Checking Id: 0 Fri Sep 23 12:54:05 2011 : Debug: [ldap] ldap_get_conn: Got Id: 0 Fri Sep 23 12:54:05 2011 : Debug: [ldap] attempting LDAP reconnection Fri Sep 23 12:54:05 2011 : Debug: [ldap] (re)connect to 10.49.64.25:389, authentication 0 Fri Sep 23 12:54:05 2011 : Debug: [ldap] bind as cn=syncuser,dc=toto,dc=com/L?JHLjvk to 10.49.64.25:389 Fri Sep 23 12:54:05 2011 : Debug: [ldap] waiting for bind result ... Fri Sep 23 12:54:05 2011 : Debug: [ldap] Bind was successful Fri Sep 23 12:54:05 2011 : Debug: [ldap] performing search in dc=corp,dc=toto,dc=com, with filter (uid=user_sps) Fri Sep 23 12:54:05 2011 : Info: [ldap] checking if remote access for user_sps is allowed by inetUserStatus Fri Sep 23 12:54:05 2011 : Info: [ldap] looking for check items in directory... Fri Sep 23 12:54:05 2011 : Debug: [ldap] userPassword -> Password-With-Header == "{SSHA}SnrchnIFWrKzn+nOzZem4YjMjRqHiavi" Fri Sep 23 12:54:05 2011 : Debug: [ldap] ntPassword -> NT-Password == 0x7305108b06d9839d8530b917307803e9 Fri Sep 23 12:54:05 2011 : Info: [ldap] looking for reply items in directory... Fri Sep 23 12:54:05 2011 : Info: [ldap] Setting Auth-Type = LDAP Fri Sep 23 12:54:05 2011 : Info: [ldap] user user_sps authorized to use remote access Fri Sep 23 12:54:05 2011 : Debug: [ldap] ldap_release_conn: Release Id: 0 Fri Sep 23 12:54:05 2011 : Info: ++[ldap] returns ok Fri Sep 23 12:54:05 2011 : Info: [files] users: Matched entry user_sps at line 1 Fri Sep 23 12:54:05 2011 : Info: ++[files] returns ok Best regards, Fred MAISON

1 1

$ENV{HOSTNAME} on debian hosts
by Fred 29 Sep '11

29 Sep '11

Hi all, I want to advise everyone of a debian-specific problem using $ENV{HOSTNAME} in freeradius 2 config files : It seems environment passed to freeradius at startup does not have HOSTNAME defined. In fact, it seems only a subset of environment variables are passed to executables ... To be able to use this, we have to explicitly set HOSTNAME environment BEFORE launching freeradius. For example : freeradius -X will expand $ENV{HOSTNAME} to empty string HOSTNAME=`hostname` freeradius -X will expand $ENV{HOSTNAME} to correct value ... in /etc/freeeradois/init.d, you could use this : export PATH="${PATH:+$PATH:}/usr/sbin:/sbin" ### this is present in original export HOSTNAME="`hostname`" ### this has to be added to access $ENV{HOSTNAME} Please note : other debian base distro as Ubuntu show same issue. Best regards Fred

3 4