- Freeradius-Users - lists.freeradius.org

++[mschap] returns reject
by scoth 29 Sep '11

29 Sep '11

I'm stuck in my testing. I have configured and reconfigured my freeradius and keep getting back to the same error: [mschap] ERROR: User-Name (RC24558\jojo) is not the same as MS-CHAP Name (jojo) from EAP-MSCHAPv2 I was able to use the mschap-username to successfully authenticate to ldap but then fail in the authentication because the usernames are not the same. Any help is greatly appreciated. Here is my log: FreeRADIUS Version 2.1.11, for host x86_64-unknown-linux-gnu, built on Jul 19 2011 at 10:04:23 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /usr/local/etc/raddb/radiusd.conf including configuration file /usr/local/etc/raddb/proxy.conf including configuration file /usr/local/etc/raddb/clients.conf including files in directory /usr/local/etc/raddb/modules/ including configuration file /usr/local/etc/raddb/modules/pap including configuration file /usr/local/etc/raddb/modules/mschap including configuration file /usr/local/etc/raddb/modules/sqlcounter_expire_on_login including configuration file /usr/local/etc/raddb/modules/ntlm_auth including configuration file /usr/local/etc/raddb/modules/expiration including configuration file /usr/local/etc/raddb/modules/always including configuration file /usr/local/etc/raddb/modules/otp including configuration file /usr/local/etc/raddb/modules/acct_unique including configuration file /usr/local/etc/raddb/modules/preprocess including configuration file /usr/local/etc/raddb/modules/linelog including configuration file /usr/local/etc/raddb/modules/soh including configuration file /usr/local/etc/raddb/modules/radutmp including configuration file /usr/local/etc/raddb/modules/dynamic_clients including configuration file /usr/local/etc/raddb/modules/policy including configuration file /usr/local/etc/raddb/modules/echo including configuration file /usr/local/etc/raddb/modules/logintime including configuration file /usr/local/etc/raddb/modules/attr_filter including configuration file /usr/local/etc/raddb/modules/unix including configuration file /usr/local/etc/raddb/modules/sradutmp including configuration file /usr/local/etc/raddb/modules/expr including configuration file /usr/local/etc/raddb/modules/perl including configuration file /usr/local/etc/raddb/modules/inner-eap including configuration file /usr/local/etc/raddb/modules/krb5 including configuration file /usr/local/etc/raddb/modules/ippool including configuration file /usr/local/etc/raddb/modules/exec including configuration file /usr/local/etc/raddb/modules/attr_rewrite including configuration file /usr/local/etc/raddb/modules/replicate including configuration file /usr/local/etc/raddb/modules/wimax including configuration file /usr/local/etc/raddb/modules/detail.example.com including configuration file /usr/local/etc/raddb/modules/digest including configuration file /usr/local/etc/raddb/modules/mac2vlan including configuration file /usr/local/etc/raddb/modules/sql_log including configuration file /usr/local/etc/raddb/modules/mac2ip including configuration file /usr/local/etc/raddb/modules/detail including configuration file /usr/local/etc/raddb/modules/ldap including configuration file /usr/local/etc/raddb/modules/rediswho including configuration file /usr/local/etc/raddb/modules/counter including configuration file /usr/local/etc/raddb/modules/chap including configuration file /usr/local/etc/raddb/modules/opendirectory including configuration file /usr/local/etc/raddb/modules/pam including configuration file /usr/local/etc/raddb/modules/realm including configuration file /usr/local/etc/raddb/modules/checkval including configuration file /usr/local/etc/raddb/modules/detail.log including configuration file /usr/local/etc/raddb/modules/smbpasswd including configuration file /usr/local/etc/raddb/modules/cui including configuration file /usr/local/etc/raddb/modules/files including configuration file /usr/local/etc/raddb/modules/etc_group including configuration file /usr/local/etc/raddb/modules/redis including configuration file /usr/local/etc/raddb/modules/passwd including configuration file /usr/local/etc/raddb/modules/smsotp including configuration file /usr/local/etc/raddb/eap.conf including configuration file /usr/local/etc/raddb/policy.conf including files in directory /usr/local/etc/raddb/sites-enabled/ including configuration file /usr/local/etc/raddb/sites-enabled/default including configuration file /usr/local/etc/raddb/sites-enabled/control-socket including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel main { allow_core_dumps = no } including dictionary file /usr/local/etc/raddb/dictionary main { name = "radiusd" prefix = "/usr/local" localstatedir = "/usr/local/var" sbindir = "/usr/local/sbin" logdir = "/usr/local/var/log/radius" run_dir = "/usr/local/var/run/radiusd" libdir = "/usr/local/lib" radacctdir = "/usr/local/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/usr/local/var/run/radiusd/radiusd.pid" checkrad = "/usr/local/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 require_message_authenticator = yes zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } client 10.0.0.0/8 { require_message_authenticator = no secret = "testing123" } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating module "exec" from file /usr/local/etc/raddb/modules/exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating module "expr" from file /usr/local/etc/raddb/modules/expr Module: Linked to module rlm_expiration Module: Instantiating module "expiration" from file /usr/local/etc/raddb/modules/expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating module "logintime" from file /usr/local/etc/raddb/modules/logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server { # from file /usr/local/etc/raddb/radiusd.conf modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating module "pap" from file /usr/local/etc/raddb/modules/pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating module "chap" from file /usr/local/etc/raddb/modules/chap Module: Linked to module rlm_mschap Module: Instantiating module "mschap" from file /usr/local/etc/raddb/modules/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no allow_retry = yes } Module: Linked to module rlm_digest Module: Instantiating module "digest" from file /usr/local/etc/raddb/modules/digest Module: Linked to module rlm_unix Module: Instantiating module "unix" from file /usr/local/etc/raddb/modules/unix unix { radwtmp = "/usr/local/var/log/radius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating module "eap" from file /usr/local/etc/raddb/eap.conf eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 4096 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 CA_path = "/usr/local/etc/raddb/certs" pem_file_type = yes private_key_file = "/usr/local/etc/raddb/certs/server.pem" certificate_file = "/usr/local/etc/raddb/certs/server.pem" CA_file = "/usr/local/etc/raddb/certs/ca.pem" private_key_password = "whatever" dh_file = "/usr/local/etc/raddb/certs/dh" random_file = "/usr/local/etc/raddb/certs/random" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/usr/local/etc/raddb/certs/bootstrap" cache { enable = no lifetime = 24 max_entries = 255 } verify { } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating module "preprocess" from file /usr/local/etc/raddb/modules/preprocess preprocess { huntgroups = "/usr/local/etc/raddb/huntgroups" hints = "/usr/local/etc/raddb/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Linked to module rlm_realm Module: Instantiating module "suffix" from file /usr/local/etc/raddb/modules/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating module "files" from file /usr/local/etc/raddb/modules/files files { usersfile = "/usr/local/etc/raddb/users" acctusersfile = "/usr/local/etc/raddb/acct_users" preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users" compat = "no" } Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating module "acct_unique" from file /usr/local/etc/raddb/modules/acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating module "detail" from file /usr/local/etc/raddb/modules/detail detail { detailfile = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Linked to module rlm_radutmp Module: Instantiating module "radutmp" from file /usr/local/etc/raddb/modules/radutmp radutmp { filename = "/usr/local/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Linked to module rlm_attr_filter Module: Instantiating module "attr_filter.accounting_response" from file /usr/local/etc/raddb/modules/attr_filter attr_filter attr_filter.accounting_response { attrsfile = "/usr/local/etc/raddb/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Instantiating module "attr_filter.access_reject" from file /usr/local/etc/raddb/modules/attr_filter attr_filter attr_filter.access_reject { attrsfile = "/usr/local/etc/raddb/attrs.access_reject" key = "%{User-Name}" } } # modules } # server server inner-tunnel { # from file /usr/local/etc/raddb/sites-enabled/inner-tunnel modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_ldap Module: Instantiating module "ldap" from file /usr/local/etc/raddb/modules/ldap ldap { server = "127.0.0.1" port = 389 password = "" identity = "" net_timeout = 1 timeout = 4 timelimit = 3 tls_mode = no start_tls = no tls_require_cert = "allow" tls { start_tls = no require_cert = "allow" } basedn = "ou=Users,dc=rcsd" filter = "(uid=%{mschap:User-Name:-%{User-Name}})" base_filter = "(objectclass=radiusprofile)" auto_header = no access_attr = "uid" access_attr_used_for_allow = yes groupname_attribute = "cn" groupmembership_filter = "(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))" dictionary_mapping = "/usr/local/etc/raddb/ldap.attrmap" ldap_debug = 0 ldap_connections_number = 5 compare_check_items = no do_xlat = yes set_auth_type = yes } rlm_ldap: Registering ldap_groupcmp for Ldap-Group rlm_ldap: Registering ldap_xlat with xlat_name ldap rlm_ldap: Over-riding set_auth_type, as there is no module ldap listed in the "authenticate" section. rlm_ldap: reading ldap<->radius mappings from file /usr/local/etc/raddb/ldap.attrmap rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password rlm_ldap: LDAP sambaLMPassword mapped to RADIUS LM-Password rlm_ldap: LDAP sambaNTPassword mapped to RADIUS NT-Password rlm_ldap: LDAP dBCSPwd mapped to RADIUS LM-Password rlm_ldap: LDAP userPassword mapped to RADIUS Password-With-Header rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network rlm_ldap: LDAP radiusClass mapped to RADIUS Class rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS Framed-AppleTalk-Network rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message rlm_ldap: LDAP radiusTunnelType mapped to RADIUS Tunnel-Type rlm_ldap: LDAP radiusTunnelMediumType mapped to RADIUS Tunnel-Medium-Type rlm_ldap: LDAP radiusTunnelPrivateGroupId mapped to RADIUS Tunnel-Private-Group-Id conns: 0x1ad15d0 Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } listen { type = "control" listen { socket = "/usr/local/var/run/radiusd/radiusd.sock" } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } ... adding new socket proxy address * port 36878 Listening on authentication address * port 1645 Listening on accounting address * port 1646 Listening on command file /usr/local/var/run/radiusd/radiusd.sock Listening on authentication address 127.0.0.1 port 18120 as server inner-tunnel Listening on proxy address * port 1647 Ready to process requests. rad_recv: Access-Request packet from host 10.0.14.36 port 1645, id=91, length=137 User-Name = "RC24558\\jojo" Framed-MTU = 1400 Called-Station-Id = "0013.5ffa.57f0" Calling-Station-Id = "0013.ceca.3fb6" Service-Type = Login-User Message-Authenticator = 0x730ec4591f16ea272e41a4d1b93ffbbb EAP-Message = 0x0202001101524332343535385c6a6f6a6f NAS-Port-Type = Wireless-802.11 NAS-Port = 15329 NAS-IP-Address = 10.0.14.36 NAS-Identifier = "ap" # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "RC24558\jojo", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 2 length 17 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] EAP Identity [eap] processing type md5 rlm_eap_md5: Issuing Challenge ++[eap] returns handled Sending Access-Challenge of id 91 to 10.0.14.36 port 1645 EAP-Message = 0x0103001604107a9555769afc05b15cfddd786cfcf120 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x4ca0317e4ca335654561e181a1238ac7 Finished request 0. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.0.14.36 port 1645, id=92, length=144 User-Name = "RC24558\\jojo" Framed-MTU = 1400 Called-Station-Id = "0013.5ffa.57f0" Calling-Station-Id = "0013.ceca.3fb6" Service-Type = Login-User Message-Authenticator = 0x469a38299798a6bdad68ad002c64c1c4 EAP-Message = 0x020300060319 NAS-Port-Type = Wireless-802.11 NAS-Port = 15329 State = 0x4ca0317e4ca335654561e181a1238ac7 NAS-IP-Address = 10.0.14.36 NAS-Identifier = "ap" # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "RC24558\jojo", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 3 length 6 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP NAK [eap] EAP-NAK asked for EAP-Type/peap [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 92 to 10.0.14.36 port 1645 EAP-Message = 0x010400061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x4ca0317e4da428654561e181a1238ac7 Finished request 1. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.0.14.36 port 1645, id=93, length=225 User-Name = "RC24558\\jojo" Framed-MTU = 1400 Called-Station-Id = "0013.5ffa.57f0" Calling-Station-Id = "0013.ceca.3fb6" Service-Type = Login-User Message-Authenticator = 0x2a3c021b7a144c149255c9aad2a96a69 EAP-Message = 0x0204005719800000004d16030100480100004403014e83706486a693aec5255a8c6210944f7d593d3271b289ef3bc606f9a21ec92c00001600040005000a0009006400620003000600130012006301000005ff01000100 NAS-Port-Type = Wireless-802.11 NAS-Port = 15329 State = 0x4ca0317e4da428654561e181a1238ac7 NAS-IP-Address = 10.0.14.36 NAS-Identifier = "ap" # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "RC24558\jojo", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 4 length 87 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 77 [peap] Length Included [peap] eaptls_verify returned 11 [peap] (other): before/accept initialization [peap] TLS_accept: before/accept initialization [peap] <<< TLS 1.0 Handshake [length 0048], ClientHello [peap] TLS_accept: SSLv3 read client hello A [peap] >>> TLS 1.0 Handshake [length 0031], ServerHello [peap] TLS_accept: SSLv3 write server hello A [peap] >>> TLS 1.0 Handshake [length 085e], Certificate [peap] TLS_accept: SSLv3 write certificate A [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [peap] TLS_accept: SSLv3 write server done A [peap] TLS_accept: SSLv3 flush data [peap] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 93 to 10.0.14.36 port 1645 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0xcb50c44266842cafcecf579486a35543eebb25e577701de400b09c629fbc1a07a47b43b1ae181c1768613c49149122b679f538bca127b3755211bf3b960bd999d11a295ac90b8ca78210db712f26704409d4bb3b271e4549b18a0385210fed58b893055d0088bb0462f872effd4076410129fcb2eeefbfbae501a61327c7feec9e114cf05541cd954496455198277cba7aa97cc5db2cb0fd4e5272e0359ca23a221ec98972fbd31c2c8780e3f5ffd11fceeecf6a16d1e3e0e3c00f26de8e07e42fdfffede0a8dc45ab6d9525567417042db59a655ea0f6439e703808293c9a78217c9445a796e3ad38ee013d10a7108c0e2dba3b36eb4e0da448dc65c0 EAP-Message = 0x490004ab308204a73082038f Message-Authenticator = 0x00000000000000000000000000000000 State = 0x4ca0317e4ea528654561e181a1238ac7 Finished request 2. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.0.14.36 port 1645, id=94, length=144 User-Name = "RC24558\\jojo" Framed-MTU = 1400 Called-Station-Id = "0013.5ffa.57f0" Calling-Station-Id = "0013.ceca.3fb6" Service-Type = Login-User Message-Authenticator = 0xec06efe320583e8240ab20df04078c7a EAP-Message = 0x020500061900 NAS-Port-Type = Wireless-802.11 NAS-Port = 15329 State = 0x4ca0317e4ea528654561e181a1238ac7 NAS-IP-Address = 10.0.14.36 NAS-Identifier = "ap" # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "RC24558\jojo", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 5 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 94 to 10.0.14.36 port 1645 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x3afcccd32589e909 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x4ca0317e4fa628654561e181a1238ac7 Finished request 3. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.0.14.36 port 1645, id=95, length=144 User-Name = "RC24558\\jojo" Framed-MTU = 1400 Called-Station-Id = "0013.5ffa.57f0" Calling-Station-Id = "0013.ceca.3fb6" Service-Type = Login-User Message-Authenticator = 0x223abc48134a68bf867277a39db25c90 EAP-Message = 0x020600061900 NAS-Port-Type = Wireless-802.11 NAS-Port = 15329 State = 0x4ca0317e4fa628654561e181a1238ac7 NAS-IP-Address = 10.0.14.36 NAS-Identifier = "ap" # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "RC24558\jojo", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 6 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 95 to 10.0.14.36 port 1645 EAP-Message = 0x010700bc190078b2cd3c43c5f26c97b73770863abe48869ed55bbcd7ec5478e8a262e827e272637c47884e3e257e78738bb255202321d5782bd4df57c8ea191eafb643ce68868c77ab12fd973fad37efd91a94946191e9c331524eb4ee1e7aceeff06a5d7a6f741cb06dfae01a4096a766a2901b7c1a915fa078c9fccf8d5582ede3cf5b9855f94c1ee714a9eccb45229fa833b41d36a07f97e992da1bee4b0166c617fe3f5b5c30cca27587801786d4f6c7ab16030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x4ca0317e48a728654561e181a1238ac7 Finished request 4. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.0.14.36 port 1645, id=96, length=460 User-Name = "RC24558\\jojo" Framed-MTU = 1400 Called-Station-Id = "0013.5ffa.57f0" Calling-Station-Id = "0013.ceca.3fb6" Service-Type = Login-User Message-Authenticator = 0x80944747c69a6d6e10419de21f4272bd EAP-Message = 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 EAP-Message = 0x12a50394fdb05d70897bf6659d6be21d3ffeb99c030f4d7714030100010116030100205a862653d6933f49eb774a277c5f8d981d2b96037ece4e96a24ecb4c697e2628 NAS-Port-Type = Wireless-802.11 NAS-Port = 15329 State = 0x4ca0317e48a728654561e181a1238ac7 NAS-IP-Address = 10.0.14.36 NAS-Identifier = "ap" # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "RC24558\jojo", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 7 length 253 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 310 [peap] Length Included [peap] eaptls_verify returned 11 [peap] <<< TLS 1.0 Handshake [length 0106], ClientKeyExchange [peap] TLS_accept: SSLv3 read client key exchange A [peap] <<< TLS 1.0 ChangeCipherSpec [length 0001] [peap] <<< TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 read finished A [peap] >>> TLS 1.0 ChangeCipherSpec [length 0001] [peap] TLS_accept: SSLv3 write change cipher spec A [peap] >>> TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 write finished A [peap] TLS_accept: SSLv3 flush data [peap] (other): SSL negotiation finished successfully SSL Connection Established [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 96 to 10.0.14.36 port 1645 EAP-Message = 0x01080031190014030100010116030100200d0692cfdffe635ebef274611fcf735831738f8900056b57e62295c0e7596613 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x4ca0317e49a828654561e181a1238ac7 Finished request 5. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.0.14.36 port 1645, id=97, length=144 User-Name = "RC24558\\jojo" Framed-MTU = 1400 Called-Station-Id = "0013.5ffa.57f0" Calling-Station-Id = "0013.ceca.3fb6" Service-Type = Login-User Message-Authenticator = 0x47ef5c834de354dfc6d3a786c2c57394 EAP-Message = 0x020800061900 NAS-Port-Type = Wireless-802.11 NAS-Port = 15329 State = 0x4ca0317e49a828654561e181a1238ac7 NAS-IP-Address = 10.0.14.36 NAS-Identifier = "ap" # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "RC24558\jojo", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 8 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake is finished [peap] eaptls_verify returned 3 [peap] eaptls_process returned 3 [peap] EAPTLS_SUCCESS [peap] Session established. Decoding tunneled attributes. [peap] Peap state TUNNEL ESTABLISHED ++[eap] returns handled Sending Access-Challenge of id 97 to 10.0.14.36 port 1645 EAP-Message = 0x0109002019001703010015e406cf732364b980898faadb579838947066471650 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x4ca0317e4aa928654561e181a1238ac7 Finished request 6. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.0.14.36 port 1645, id=98, length=178 User-Name = "RC24558\\jojo" Framed-MTU = 1400 Called-Station-Id = "0013.5ffa.57f0" Calling-Station-Id = "0013.ceca.3fb6" Service-Type = Login-User Message-Authenticator = 0xc396b72f72e366d2c3d40579aa8754c8 EAP-Message = 0x020900281900170301001dc33a990e62301104e56b7858134a582a8ed9672aad0e4f3206cc8a3edb NAS-Port-Type = Wireless-802.11 NAS-Port = 15329 State = 0x4ca0317e4aa928654561e181a1238ac7 NAS-IP-Address = 10.0.14.36 NAS-Identifier = "ap" # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "RC24558\jojo", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 9 length 40 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state WAITING FOR INNER IDENTITY [peap] Identity - RC24558\jojo [peap] Got inner identity 'RC24558\jojo' [peap] Setting default EAP type for tunneled EAP session. [peap] Got tunneled request EAP-Message = 0x0209001101524332343535385c6a6f6a6f server { [peap] Setting User-Name to RC24558\jojo Sending tunneled request EAP-Message = 0x0209001101524332343535385c6a6f6a6f FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "RC24558\\jojo" server inner-tunnel { # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/inner-tunnel +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "RC24558\jojo", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[control] returns noop [eap] EAP packet type response id 9 length 17 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop [ldap] performing user authorization for RC24558\jojo [ldap] expand: (uid=%{mschap:User-Name:-%{User-Name}}) -> (uid=jojo) [ldap] expand: ou=Users,dc=rcsd -> ou=Users,dc=rcsd [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] attempting LDAP reconnection [ldap] (re)connect to 127.0.0.1:389, authentication 0 [ldap] bind as / to 127.0.0.1:389 [ldap] waiting for bind result ... [ldap] Bind was successful [ldap] performing search in ou=Users,dc=rcsd, with filter (uid=jojo) [ldap] checking if remote access for RC24558\jojo is allowed by uid [ldap] looking for check items in directory... [ldap] userPassword -> Password-With-Header == "{SSHA}II8f7AGFYlC1KCv9i1ciQO5U9qNG1RrG" [ldap] sambaNTPassword -> NT-Password == 0x3530354139323739434644324639344336353839383035353143464445373335 [ldap] looking for reply items in directory... [ldap] user RC24558\jojo authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] Normalizing NT-Password from hex encoding [pap] Normalizing SSHA1-Password from base64 encoding [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /usr/local/etc/raddb/sites-enabled/inner-tunnel +- entering group authenticate {...} [eap] EAP Identity [eap] processing type mschapv2 rlm_eap_mschapv2: Issuing Challenge ++[eap] returns handled } # server inner-tunnel [peap] Got tunneled reply code 11 EAP-Message = 0x010a00261a010a002110dc7866d4128b49da77e4041e94ff2deb524332343535385c6a6f6a6f Message-Authenticator = 0x00000000000000000000000000000000 State = 0xdc586d28dc52772ac41aca5400308a27 [peap] Got tunneled reply RADIUS code 11 EAP-Message = 0x010a00261a010a002110dc7866d4128b49da77e4041e94ff2deb524332343535385c6a6f6a6f Message-Authenticator = 0x00000000000000000000000000000000 State = 0xdc586d28dc52772ac41aca5400308a27 [peap] Got tunneled Access-Challenge ++[eap] returns handled Sending Access-Challenge of id 98 to 10.0.14.36 port 1645 EAP-Message = 0x010a003d19001703010032ad137791c4500ba4df2a20ca6838b44dad3417e2ebab688484e1695317a6f5efb600b21ade1d97484d0de7f48a4217ecb2a3 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x4ca0317e4baa28654561e181a1238ac7 Finished request 7. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.0.14.36 port 1645, id=99, length=224 User-Name = "RC24558\\jojo" Framed-MTU = 1400 Called-Station-Id = "0013.5ffa.57f0" Calling-Station-Id = "0013.ceca.3fb6" Service-Type = Login-User Message-Authenticator = 0x4c9395db835a55b9dd2f9f15d0277a1c EAP-Message = 0x020a00561900170301004b22b2f8b3aa052a4493207355395da0dfc741f86d49b30c6f79095df3b3e93493bdaae374f6c08e6cda7d36f84da65e68efaadb2206a64c258422593402705c44087a81ca68867484d087fc NAS-Port-Type = Wireless-802.11 NAS-Port = 15329 State = 0x4ca0317e4baa28654561e181a1238ac7 NAS-IP-Address = 10.0.14.36 NAS-Identifier = "ap" # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "RC24558\jojo", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 10 length 86 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state phase2 [peap] EAP type mschapv2 [peap] Got tunneled request EAP-Message = 0x020a003f1a020a003a3152db2b98f772e2c071e33180e86333770000000000000000348b1cdaee566588b2ae036201f6531b5b9751289c96a32d006a6f6a6f server { [peap] Setting User-Name to RC24558\jojo Sending tunneled request EAP-Message = 0x020a003f1a020a003a3152db2b98f772e2c071e33180e86333770000000000000000348b1cdaee566588b2ae036201f6531b5b9751289c96a32d006a6f6a6f FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "RC24558\\jojo" State = 0xdc586d28dc52772ac41aca5400308a27 server inner-tunnel { # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/inner-tunnel +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "RC24558\jojo", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[control] returns noop [eap] EAP packet type response id 10 length 63 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop [ldap] performing user authorization for RC24558\jojo [ldap] expand: (uid=%{mschap:User-Name:-%{User-Name}}) -> (uid=jojo) [ldap] expand: ou=Users,dc=rcsd -> ou=Users,dc=rcsd [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in ou=Users,dc=rcsd, with filter (uid=jojo) [ldap] checking if remote access for RC24558\jojo is allowed by uid [ldap] looking for check items in directory... [ldap] userPassword -> Password-With-Header == "{SSHA}II8f7AGFYlC1KCv9i1ciQO5U9qNG1RrG" [ldap] sambaNTPassword -> NT-Password == 0x3530354139323739434644324639344336353839383035353143464445373335 [ldap] looking for reply items in directory... [ldap] user RC24558\jojo authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] Normalizing NT-Password from hex encoding [pap] Normalizing SSHA1-Password from base64 encoding [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /usr/local/etc/raddb/sites-enabled/inner-tunnel +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/mschapv2 [eap] processing type mschapv2 [mschapv2] # Executing group from file /usr/local/etc/raddb/sites-enabled/inner-tunnel [mschapv2] +- entering group MS-CHAP {...} [mschap] No Cleartext-Password configured. Cannot create LM-Password. [mschap] Found NT-Password [mschap] ERROR: User-Name (RC24558\jojo) is not the same as MS-CHAP Name (jojo) from EAP-MSCHAPv2 ++[mschap] returns reject [eap] Freeing handler ++[eap] returns reject Failed to authenticate the user. } # server inner-tunnel [peap] Got tunneled reply code 3 EAP-Message = 0x040a0004 Message-Authenticator = 0x00000000000000000000000000000000 [peap] Got tunneled reply RADIUS code 3 EAP-Message = 0x040a0004 Message-Authenticator = 0x00000000000000000000000000000000 [peap] Tunneled authentication was rejected. [peap] FAILURE -- View this message in context: http://freeradius.1045715.n5.nabble.com/mschap-returns-reject-tp4850396p485… Sent from the FreeRadius - User mailing list archive at Nabble.com.

3 3

2.1.11 inexplicable crash
by DaveA 28 Sep '11

28 Sep '11

Hello, After upgrading to FreeRadius version 2.1.11 on RHEL6, I am seeing the following in radius.log right before the process terminates: Wed Sep 28 11:16:12 2011 : Error: Child PID 30242 is taking too much time: forcing failure and killing child. Wed Sep 28 11:16:12 2011 : Error: Child PID 30243 is taking too much time: forcing failure and killing child. Wed Sep 28 11:16:12 2011 : Error: Child PID 30244 is taking too much time: forcing failure and killing child. Wed Sep 28 11:16:13 2011 : Error: Child PID 30245 is taking too much time: forcing failure and killing child. Wed Sep 28 11:16:13 2011 : Info: Signalled to terminate Wed Sep 28 11:16:13 2011 : Info: Exiting normally. Wed Sep 28 11:16:13 2011 : Error: Child PID 30246 is taking too much time: forcing failure and killing child. Wed Sep 28 11:16:13 2011 : Error: Request 179116 has been waiting in the processing queue for 8 seconds. Check that all databases are running properly! Wed Sep 28 11:16:13 2011 : Error: Child PID 30247 is taking too much time: forcing failure and killing child. Wed Sep 28 11:16:13 2011 : Error: Child PID 30251 is taking too much time: forcing failure and killing child. Wed Sep 28 11:16:13 2011 : Error: Child PID 30252 is taking too much time: forcing failure and killing child. Wed Sep 28 11:16:13 2011 : Error: Child PID 30249 is taking too much time: forcing failure and killing child. Wed Sep 28 11:16:13 2011 : Error: Child PID 30253 is taking too much time: forcing failure and killing child. Wed Sep 28 11:16:13 2011 : Error: Child PID 30255 is taking too much time: forcing failure and killing child. Wed Sep 28 11:16:13 2011 : Error: Child PID 30250 is taking too much time: forcing failure and killing child. Wed Sep 28 11:16:13 2011 : Error: Child PID 30248 is taking too much time: forcing failure and killing child. Wed Sep 28 11:16:13 2011 : Error: Child PID 30254 is taking too much time: forcing failure and killing child. Wed Sep 28 11:16:14 2011 : Error: Child PID 30257 is taking too much time: forcing failure and killing child. Wed Sep 28 11:16:14 2011 : Error: Child PID 30256 is taking too much time: forcing failure and killing child. Wed Sep 28 11:16:14 2011 : Error: Child PID 30258 is taking too much time: forcing failure and killing child. Wed Sep 28 11:16:14 2011 : Error: Child PID 30259 is taking too much time: forcing failure and killing child. The radiusd process ends, and I can't find anything to explain this. I've restarted the service with -X and will report back if I see anything suspicious. In the meantime, has anyone else seen this? Thanks, Dave -- View this message in context: http://freeradius.1045715.n5.nabble.com/2-1-11-inexplicable-crash-tp4849607… Sent from the FreeRadius - User mailing list archive at Nabble.com.

2 6

Duplicate Start packets in RadAcct table
by zwolfinger 28 Sep '11

28 Sep '11

I am seeing duplicate START packets in the RadAcct table. When a STOP packet is received, it applies to only one of the duplicated START packets, leaving a "phantom" START packet. Debug (/usr/sbin/freeside -Xx) appears to show the START packet only being received and inserted in the table once. Any thoughts on how this can be happening / how to fix it? Thanks! -- View this message in context: http://freeradius.1045715.n5.nabble.com/Duplicate-Start-packets-in-RadAcct-… Sent from the FreeRadius - User mailing list archive at Nabble.com.

1 0

Postgresql undefined symbol PQinitSSL
by Thor Spruyt 28 Sep '11

28 Sep '11

Hi, I have the same problem with both 2.1.11 and 2.1.12-pre ... I'm on CentOS 4.6 with following RPMs: $ rpm -qa | grep devel glibc-devel-2.3.4-2.39 krb5-devel-1.3.4-60.el4_7.2 mysql-devel-5.0.54-1.el4.centos openssl-devel-0.9.7a-43.17.el4_8.5 kernel-smp-devel-2.6.9-67.0.4.EL e2fsprogs-devel-1.35-12.17.el4 zlib-devel-1.2.1.2-1.2 openldap-devel-2.2.13-12.el4 kernel-devel-2.6.9-67.0.4.EL cyrus-sasl-devel-2.1.19-14 postgresql-devel-7.4.19-1.el4_6.1 $ rpm -qa | grep postgresql postgresql-7.4.19-1.el4_6.1 postgresql-libs-7.4.19-1.el4_6.1 postgresql-server-7.4.19-1.el4_6.1 postgresql-devel-7.4.19-1.el4_6.1 $ rpm -qa | grep openssl openssl-devel-0.9.7a-43.17.el4_8.5 xmlsec1-openssl-1.2.6-3 openssl096b-0.9.6b-22.46 openssl-0.9.7a-43.17.el4_8.5 I use the following configure options: ./configure --prefix=/opt/freeradius-server-2.1.12 --with-mysql --with-postgresql --with-openldap --with-openssl --without-snmp --without-krb5 --without-dhcp Everything seems to build fine, here's the postgresql module build output: Making all in rlm_sql_postgresql. gmake[10]: Entering directory `/home/thor/freeradius-server-2.1.12/src/modules/rlm_sql/drivers/rlm_sql_postgresql' /home/thor/freeradius-server-2.1.12/libtool --mode=compile gcc -g -O2 -Wall -D_GNU_SOURCE -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DNDEBUG -I../.. -I/home/thor/freeradius-server-2.1.12/src/ -I/usr/include/postgresql -I/home/thor/freeradius-server-2.1.12/libltdl -c sql_postgresql.c mkdir .libs gcc -g -O2 -Wall -D_GNU_SOURCE -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DNDEBUG -I../.. -I/home/thor/freeradius-server-2.1.12/src/ -I/usr/include/postgresql -I/home/thor/freeradius-server-2.1.12/libltdl -c sql_postgresql.c -fPIC -DPIC -o .libs/sql_postgresql.o sql_postgresql.c: In function `sql_init_socket': sql_postgresql.c:153: warning: implicit declaration of function `PQinitSSL' gcc -g -O2 -Wall -D_GNU_SOURCE -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DNDEBUG -I../.. -I/home/thor/freeradius-server-2.1.12/src/ -I/usr/include/postgresql -I/home/thor/freeradius-server-2.1.12/libltdl -c sql_postgresql.c -o sql_postgresql.o >/dev/null 2>&1 /home/thor/freeradius-server-2.1.12/libtool --mode=link gcc -release 2.1.12 \ -module -export-dynamic -o rlm_sql_postgresql.la \ -rpath /opt/freeradius-server-2.1.12/lib sql_postgresql.lo -L/usr/lib -lpq gcc -shared .libs/sql_postgresql.o -L/usr/lib -lpq -Wl,-soname -Wl,rlm_sql_postgresql-2.1.12.so -o .libs/rlm_sql_postgresql-2.1.12.so (cd .libs && rm -f rlm_sql_postgresql.so && ln -s rlm_sql_postgresql-2.1.12.so rlm_sql_postgresql.so) ar cru .libs/rlm_sql_postgresql.a sql_postgresql.o ranlib .libs/rlm_sql_postgresql.a creating rlm_sql_postgresql.la (cd .libs && rm -f rlm_sql_postgresql.la && ln -s ../rlm_sql_postgresql.la rlm_sql_postgresql.la) gmake[10]: Leaving directory `/home/thor/freeradius-server-2.1.12/src/modules/rlm_sql/drivers/rlm_sql_postgresql' But then when starting the server with -X with my configuration, I get the following and it stops: rlm_sql Creating new attribute sql_auth1-SQL-Group rlm_sql (sql_auth1): Driver rlm_sql_postgresql (module rlm_sql_postgresql) loaded and linked rlm_sql (sql_auth1): Attempting to connect to radius@195.130.158.155:/radius rlm_sql (sql_auth1): starting 0 rlm_sql (sql_auth1): Attempting to connect rlm_sql_postgresql #0 /opt/radproxyin/freeradius/sbin/radiusd: symbol lookup error: /opt/freeradius-server-2.1.12/lib/rlm_sql_postgresql-2.1.12.so: undefined symbol: PQinitSSL Any ideas on what could be the problem here or any solution or tips on where to look further? P.S.: I'm not looking to get SSL working for my database connections, I just want to get the server running with postgresql and eap support built in. Regards, Thor

2 2

Last call for 2.1.12
by Alan DeKok 28 Sep '11

28 Sep '11

I've put new images of 2.1.12 on the web site: http://git.freeradius.org/pre/ If there are no objections, I will release 2.1.12 on Friday, using those exact files. Please test && report any show-stoppers. Alan DeKok.

1 0

Confused what to do next~How to understand FreeRadius
by snan4love 28 Sep '11

28 Sep '11

Hello Everyone: Thank you very much for opening this topic. I have worked on FreeRadius for almost 2 monthes,my purpose is to set up a Radius server which could be used for authentication , authority and accounting for my WLAN. Right now, I "guess" i have finished the "Authentication Step". I installed the Radius server + MySQL on my FC 14 host,there is a client AP connect to this radius server, the users hold Windows XP laptop could get authentication from radius server via PEAP or EAP-TLS. Here is a first little problem.Right now i could add and delete user in the radcheck table of MySQL,but all the passwords were stored in cleartext?is this the only way to store this password? is it safe enough?is it could be store in the format of ****** like what we set in the wpa-psk mode? Most Seriously, I am confused how to implement the "Authority Step" and "Accounting Step". For the "Authority Step",in my thought, I should create several different GROUPs, each GROUP has different authority,and then divide the users into different GROUPs and get different authority. Is that correct? For the "Accounting Step",i used DaloRadius,but found out there are few help for this web base management system online, and the MANUAL will cost $250.And also the additional mySQL tables makes me more confused. I want to know if there is a example that set up the authority and accounting features of FreeRadius?or just give me a little hints about where to start it step by step.I know there is a really big question. Any hints will be really help,any useful docments and links will be really appreciate. For example, there are 9 tables in the defalut mysql scheme, like radcheck,radacct,nas,radgroup,radgroupreply etc, is there a document to describe these features? I read all the .conf files couple of times ,but still confused about this stuff. -- View this message in context: http://freeradius.1045715.n5.nabble.com/Confused-what-to-do-next-How-to-und… Sent from the FreeRadius - User mailing list archive at Nabble.com.

5 7

FR, SQL backend and Foreign keys
by Fabien COMBERNOUS 28 Sep '11

28 Sep '11

Hi, In the samples schema.sql proposed for SQL backend, no foreign keys are used. Any reason ? With ON DELETE CASCADE or ON UPDATE CASCADE constraint it should be easier to manage updates or deletetion of records ? Am i missing something ? -- *Fabien COMBERNOUS* /unix system engineer/ www.kezia.com <http://www.kezia.com/> *Tel: +33(0)9 5279 5202* Kezia

4 7

Enforcing Login-Time on NAS
by Shiv 28 Sep '11

28 Sep '11

I know that Login-Time can be used with Users and Groups but is there a way to use this with NAS'? For example, If I want NAS-A to allow logins only from 1700-1800 and NAS-B to allow logins only from 0900-1300. How would I be able to ensure this? I have tried this with Huntgroups, but only able to prevent/allow logins unconditionally. How do I attach the Login-Time attribute to NAS and not users or groups? -- Regards, Shivkumar

4 7

[mschap] FAILED: MS-CHAP2-Response is incorrect
by sekchel lee 28 Sep '11

28 Sep '11

mysql> select * from radcheck; +----+------------+---------------+----+------------------------------------+ | id | username | attribute | op | value | +----+------------+---------------+----+------------------------------------+ | 1 | testuser | User-Password | := | $1$vQGXHdnO$7DjKbeUeAadrsfGg8thE2. | FreeRADIUS Version 2.1.7, for host i686-redhat-linux-gnu, built on Mar 31 2010 at 00:25:31 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/modules/ including configuration file /etc/raddb/modules/otp including configuration file /etc/raddb/modules/detail.example.com including configuration file /etc/raddb/modules/files including configuration file /etc/raddb/modules/sql_log including configuration file /etc/raddb/modules/attr_filter including configuration file /etc/raddb/modules/wimax including configuration file /etc/raddb/modules/preprocess including configuration file /etc/raddb/modules/mac2vlan including configuration file /etc/raddb/modules/detail including configuration file /etc/raddb/modules/expiration including configuration file /etc/raddb/modules/inner-eap including configuration file /etc/raddb/modules/policy including configuration file /etc/raddb/modules/realm including configuration file /etc/raddb/modules/attr_rewrite including configuration file /etc/raddb/modules/linelog including configuration file /etc/raddb/modules/cui including configuration file /etc/raddb/modules/smbpasswd including configuration file /etc/raddb/modules/smsotp including configuration file /etc/raddb/modules/always including configuration file /etc/raddb/modules/sradutmp including configuration file /etc/raddb/modules/digest including configuration file /etc/raddb/modules/expr including configuration file /etc/raddb/modules/pam including configuration file /etc/raddb/modules/checkval including configuration file /etc/raddb/modules/exec including configuration file /etc/raddb/modules/mac2ip including configuration file /etc/raddb/modules/perl including configuration file /etc/raddb/modules/radutmp including configuration file /etc/raddb/modules/mschap including configuration file /etc/raddb/modules/unix including configuration file /etc/raddb/modules/logintime including configuration file /etc/raddb/modules/ippool including configuration file /etc/raddb/modules/etc_group including configuration file /etc/raddb/modules/pap including configuration file /etc/raddb/modules/echo including configuration file /etc/raddb/modules/passwd including configuration file /etc/raddb/modules/chap including configuration file /etc/raddb/modules/acct_unique including configuration file /etc/raddb/modules/sqlcounter_expire_on_login including configuration file /etc/raddb/modules/detail.log including configuration file /etc/raddb/modules/counter including configuration file /etc/raddb/eap.conf including configuration file /etc/raddb/sql.conf including configuration file /etc/raddb/sql/mysql/dialup.conf including configuration file /etc/raddb/sql/mysql/counter.conf including configuration file /etc/raddb/sqlippool.conf including configuration file /etc/raddb/sql/mysql/ippool.conf including configuration file /etc/raddb/policy.conf including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/inner-tunnel including configuration file /etc/raddb/sites-enabled/control-socket including configuration file /etc/raddb/sites-enabled/default group = radiusd user = radiusd including dictionary file /etc/raddb/dictionary main { prefix = "/usr" localstatedir = "/var" logdir = "/var/log/radius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 allow_core_dumps = no pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = no log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 require_message_authenticator = no zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 irt = 2 mrt = 16 mrc = 5 mrd = 30 } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client xxx.xx.xxx.124 { ipaddr = xx0.xx.xxx.124 require_message_authenticator = no secret = "test1234" nastype = "other" } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating expr Module: Linked to module rlm_expiration Module: Instantiating expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server inner-tunnel { modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating chap Module: Linked to module rlm_mschap Module: Instantiating mschap mschap { use_mppe = no require_encryption = no require_strong = no with_ntdomain_hack = no } Module: Linked to module rlm_unix Module: Instantiating unix unix { radwtmp = "/var/log/radius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 2048 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 pem_file_type = yes private_key_file = "/etc/raddb/certs/server.pem" certificate_file = "/etc/raddb/certs/server.pem" CA_file = "/etc/raddb/certs/ca.pem" private_key_password = "whatever" dh_file = "/etc/raddb/certs/dh" random_file = "/etc/raddb/certs/random" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/etc/raddb/certs/bootstrap" cache { enable = no lifetime = 24 max_entries = 255 } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating suffix realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating files files { usersfile = "/etc/raddb/users" acctusersfile = "/etc/raddb/acct_users" preproxy_usersfile = "/etc/raddb/preproxy_users" compat = "no" } Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating attr_filter.access_reject attr_filter attr_filter.access_reject { attrsfile = "/etc/raddb/attrs.access_reject" key = "%{User-Name}" } } # modules } # server server { modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating preprocess preprocess { huntgroups = "/etc/raddb/huntgroups" hints = "/etc/raddb/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating detail detail { detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Instantiating attr_filter.accounting_response attr_filter attr_filter.accounting_response { attrsfile = "/etc/raddb/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } listen { type = "control" listen { socket = "/var/run/radiusd/radiusd.sock" } } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on command file /var/run/radiusd/radiusd.sock Ready to process requests. rad_recv: Access-Request packet from host xxx.xx.xxx.124 port 45736, id=85, length=153 Service-Type = Framed-User Framed-Protocol = PPP User-Name = "testuser" MS-CHAP-Challenge = 0x3ee4b2159d1bb98a2346bc0486f40c76 MS-CHAP2-Response = 0x810075b62261a0af713e9ea1efa6847ab7b8000000000000000020fd3c4aa07aa4adcc5fc0b9c6b8a8245ec3a2d2399a5df8 Calling-Station-Id = "xx.xx.229.203" NAS-IP-Address = 127.0.0.1 NAS-Port = 0 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop [mschap] Found MS-CHAP attributes. Setting 'Auth-Type = mschap' ++[mschap] returns ok [suffix] No '@' in User-Name = "testuser", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] No EAP-Message, not doing EAP ++[eap] returns noop ++[unix] returns notfound [files] users: Matched entry DEFAULT at line 172 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = MSCHAP +- entering group MS-CHAP {...} [mschap] No Cleartext-Password configured. Cannot create LM-Password. [mschap] No Cleartext-Password configured. Cannot create NT-Password. [mschap] Told to do MS-CHAPv2 for testuser with NT-Password [mschap] FAILED: No NT/LM-Password. Cannot perform authentication. [mschap] FAILED: MS-CHAP2-Response is incorrect ++[mschap] returns reject Failed to authenticate the user. Using Post-Auth-Type Reject +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> testuser attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 0 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 0 Sending Access-Reject of id 85 to xxx.xx.xxx.124 port 45736 Waking up in 4.9 seconds. Cleaning up request 0 ID 85 with timestamp +7 Ready to process requests.

2 1

couldn't link driver rlm_sql_mysql
by gary 28 Sep '11

28 Sep '11

Hi All I am setting up freeradius 2.1.11+mysql 5.5.16 on Fedora 13. Executing command "radiusd -X" it says could not link driver rlm_sql_mysql(read as below). It not worked even I install "freeradius-mysql" library but I can find the driver "rlm_sql_mysql.so" in "/usr/lib/freeradius" folder. Anyone can help me? ################################################################### #radiusd -X Could not link driver rlm_sql_mysql: rlm_sql_mysql.so: cannot open shared object file: No such file or directory Make sure it (and all its dependent libraries!) are in the search path of your system's ld. /usr/local/etc/raddb/sql.conf[22]: Instantiation failed for module "sql" /usr/local/etc/raddb/sites-enabled/default[166]: Failed to load module "sql". /usr/local/etc/raddb/sites-enabled/default[69]: Errors parsing authorize section. ################################################################## Best Regards Gary

3 3