- Freeradius-Users - lists.freeradius.org

Re: "use_tunnel_reply" not working in EAP-PEAP (Proxied as plain MSCHAPv2) in eap.conf
by Nitin Bhardwaj 08 Jul '11

08 Jul '11

/ > Nitin Bhardwaj wrote: > > Hi, > > Please edit your posts. It's not nice to go through hundreds of lines > of garbage in order to read the *real* content of the message. /Alan, I posted the output of "radiusd -X" in the previous message as is the norm on the mailing-list, and replied to the same in last message. That is not a *garbage*, isn't it ? / > > Found out that this works perfectly fine in freeradius 3.0.0 (master git > > branch). > > That's nice to know. > > > Can anyone please suggest which patches I need to back-port to 2.1.11 to > > make this work in 2.1.x branch too ? > > You can't. The code is *completely* different. > > Alan DeKok. /In 2.1.11, I observed that the problem happens when you set "proxy_tunneled_request_as_eap = no" (with "default_eap_type = mschapv2"). Hence it seems the function mschap_postproxy() in rlm_eap_mschapv2.c is somehow wiping off the extra attributes. Comparing radiusd -X logs of 2.x with 3.x, corroborate this observation: -------------------------< snip-log 2.x >------------------------------- # Executing section post-proxy from file /usr/local/etc/raddb/sites-enabled/default +- entering group post-proxy {...} [eap] Doing post-proxy callback [eap] Passing reply from proxy back into the tunnel. server proxy-inner-tunnel { [eap] Passing reply back for EAP-MS-CHAP-V2 # Executing section post-proxy from file /usr/local/etc/raddb/sites-enabled/proxy-inner-tunnel +- entering group post-proxy {...} [eap] Doing post-proxy callback rlm_eap_mschapv2: Passing reply from proxy back into the tunnel 0x8e86e20 2. rlm_eap_mschapv2: Authentication succeeded. MSCHAP Success ++[eap] returns ok WARNING: Empty post-auth section. Using default return values. } # server proxy-inner-tunnel -------------------------< snip-end >------------------------------- -------------------------< snip-log 3.x >--------------------------- (8) # Executing section post-proxy from file /usr/local/etc/raddb/sites-enabled/default (8) group post-proxy { (8) - entering group post-proxy {...} (8) eap : Doing post-proxy callback (8) eap : Passing reply from proxy back into the tunnel. server proxy-inner-tunnel { (8) eap : Passing reply back for EAP-MS-CHAP-V2 (8) # Executing section post-proxy from file /usr/local/etc/raddb/sites-enabled/proxy-inner-tunnel (8) group post-proxy { (8) - entering group post-proxy {...} (8) [eap] = noop (8) WARNING: Empty post-auth section. Using default return values. } # server proxy-inner-tunnel -------------------------< snip-end >------------------------------- In 3.x code, We are returning a RLM_MODULE_NOOP from eap_post_proxy() : 582 /* 583 * Just in case the admin lists EAP in post-proxy-type Fail. 584 */ 585 if (!request->proxy_reply) return RLM_MODULE_NOOP; But we are not doing so in 2.1.11 code. We call the MSCHAPv2 callback, i.e. mschap_postproxy(), which might be wiping off the attributes. So, my question is: will adding this code patch to 2.x code prudent to make it work ? Or we need to fix the mschapv2 handler itself : mschap_postproxy() in rlm_eap_mschapv2.c,so that it retains the extra attributes sent by the RADIUS home server ? Please advise. -- Thanks, Nitin.

3 8

Mac-Auth
by Paulo Maia 08 Jul '11

08 Jul '11

Hi Guys , Here is the thing , im trying to use Mac-Auth , I managed to get working using authorized-macs files , although i need to use a mysql table witch i already have with the ssid and mac-address fields and i need to add an operator to expired macs , coz i work at a college campus and students mac-addresses need to expire acording to their course period . Any ideas ? Thanks in advance .

7 11

password logging only for local users
by Meike Stone 07 Jul '11

07 Jul '11

Hello, we are using the freeradius server with authentication against ldap as "local database" and proxy and realms (IPASS) to authenticate users are not in our database. So is is possible, to disable the password logging only for the proxied request. The local requests are only users who got a temporary voucher. In case of failure, the helpdesk should use the log to check if the user did use the correct password. But the password for IPASS users should not be logged. If I disable the password logging in the detail section (suppress {User-Password}), the complete password logging will be disabled. Is it possible, to disable this selective? Thanks for help - Meike

1 0

Re: "use_tunnel_reply" not working in EAP-PEAP (Proxied as plain MSCHAPv2) in eap.conf
by Alan Buxey 07 Jul '11

07 Jul '11

use version 3 ? the things you want work, why stick to 2.1.x? Alan

3 4

Running external programs
by rihad 07 Jul '11

07 Jul '11

Hi, all. We have some legacy software that ran under XTradius (xtradius.sourceforge.net) The important thing was to execute an external program for every auth & accounting request. Now I need to recreate all that on another server, and I must use the same legacy billing software. Unfortunately one can no longer build the old XTradius on modern FreeBSDs, apparently it has some variable linkage problems. Can that simple task be done in FreeRADIUS instead? Can it be configured to call an external program (Auth-Type "External" in XTradius)? Thanks!

3 4

Re: "use_tunnel_reply" not working in EAP-PEAP (Proxied as plain MSCHAPv2) in eap.conf
by Nitin Bhardwaj 07 Jul '11

07 Jul '11

/ > Hi, > > > Sigh! > > > > Tried 3.x sometime back, it was seg-faulting left-and-right in my > > 3.0 is not a static beast. sometime back is sometime back! there have been > several key fixes to it - and more when people run it. > > its no good saying seg-faulting left-ad-right' if those issues arent > reported to the dev list - as they wont get fixed unless people report > them - or run the server to find them ;-) > > > scenario, so want to stay with "official" and stable releases only. > > 3.x is an official release - its not some random fork by third party > > alan /Sorry, what I meant was, Looking at the descriptions of various branches here : http://git.freeradius.org/ : o master <http://github.com/alandekok/freeradius-server/tree/master> - The next "major" release, which will have new features and other changes. o v2.1.x <http://github.com/alandekok/freeradius-server/tree/v2.1.x> - The "long term support" release. The only changes to this code will be minor bug fixes. All new development is done in the "stable" branch. I decided to take the "long-term-support" release :) -- Nitin.

1 0

Re: Welcome to the "Freeradius-Users" mailing list
by silambarasan sundar 07 Jul '11

07 Jul '11

Hi, I am very new to radius server and installed “freeradius-1.1.2-sol10-sparc-local”. While starting the server I am seeing the below error message. I did not modify any configuration file. Just running the radius after installation. Please help me in solving this issue. I tried the freeradius-1.1.7-sol10-sparc-local , I got the same error. bash-3.00# radiusd -X Starting - reading configuration files ... reread_config: reading radiusd.conf Config: including file: /usr/local/etc/raddb/proxy.conf Config: including file: /usr/local/etc/raddb/clients.conf Config: including file: /usr/local/etc/raddb/snmp.conf Config: including file: /usr/local/etc/raddb/eap.conf Config: including file: /usr/local/etc/raddb/sql.conf main: prefix = "/usr/local" main: localstatedir = "/usr/local/var" main: logdir = "/usr/local/var/log/radius" main: libdir = "/usr/local/lib" main: radacctdir = "/usr/local/var/log/radius/radacct" main: hostname_lookups = no main: snmp = no main: max_request_time = 30 main: cleanup_delay = 5 main: max_requests = 1024 main: delete_blocked_requests = 0 main: port = 0 main: allow_core_dumps = no main: log_stripped_names = no main: log_file = "/usr/local/var/log/radius/radius.log" main: log_auth = no main: log_auth_badpass = no main: log_auth_goodpass = no main: pidfile = "/usr/local/var/run/radiusd/radiusd.pid" main: user = "(null)" main: group = "(null)" main: usercollide = no main: lower_user = "no" main: lower_pass = "no" main: nospace_user = "no" main: nospace_pass = "no" main: checkrad = "/usr/local/sbin/checkrad" main: proxy_requests = yes proxy: retry_delay = 5 proxy: retry_count = 3 proxy: synchronous = no proxy: default_fallback = yes proxy: dead_time = 120 proxy: post_proxy_authorize = no proxy: wake_all_if_all_dead = no security: max_attributes = 200 security: reject_delay = 1 security: status_server = no main: debug_level = 0 read_config_files: reading dictionary read_config_files: reading naslist Using deprecated naslist file. Support for this will go away soon. read_config_files: reading clients read_config_files: reading realms radiusd: entering modules setup Segmentation Fault (core dumped) Thanks Simbu

2 1

rlm_sql: "NUMERIC VALUE OUT OF RANGE" error
by Vegard Svanberg 07 Jul '11

07 Jul '11

Freeradius 2.1.0. I have a NAS which sends a NAS-Port-Id attribute in the range 2147483648..2164260863. PostgreSQL doesn't like the query Freeradius performs. It's choking when trying to insert for instance '2163214239::integer' into the radacct table. $ select 2163214239::integer; ERROR: integer out of range Example: INSERT INTO radacct (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol, FramedIPAddress, AcctStopDelay) values('80f0079f', '5c9f0b7076dcc9c0', 'username', NULLIF('', ''), '1.2.3.4', 2163214239::integer, 'Wireless-802.11', ('2008-09-26 09:52:52'::timestamp - '1'::interval - '3382'::interval), ('2008-09-26 09:52:52'::timestamp - '1'::interval), NULLIF('3382', '')::bigint, '', '', (('0'::bigint << 32) + '57743'::bigint), (('0'::bigint << 32) + '294709'::bigint), 'hotspot', 'XX:XX:XX:XX:XX:XX', 'Lost-Service', '', '', NULLIF('192.168.12.94', '')::inet, 0) rlm_sql_postgresql: Status: PGRES_FATAL_ERROR rlm_sql_postgresql: Error integer out of range rlm_sql_postgresql: Postgresql Fatal Error: [22003: NUMERIC VALUE OUT OF RANGE] Occurred!! [sql] Couldn't insert SQL accounting STOP record - ERROR: integer out of range rlm_sql (sql): Released sql socket id: 3 ++[sql] returns fail Quick fixes...? -- Vegard Svanberg <vegard(a)svanberg.no> [*Takapa@IRC (EFnet)]

6 6

Make the server certificate from Thawte
by Alexey Shildyakov 06 Jul '11

06 Jul '11

Hello. I want to use the certificate from Thawte. First of all I tried to use free SSL certificate from Thawte. I received 3 certificates in PEM-format: my Thawte trial SSL certificate, Thawte Trial Secure Server Intermediate CA and Thawte Test CA Root certificate in format: -----BEGIN CERTIFICATE----- text here -----END CERTIFICATE----- I made .pem files from them with no new line in end of file. The eap.conf is: private_key_password = (is empty because no password in certificates) private_key_file = ${certdir}/trialThawte.pem certificate_file = ${certdir}/trialThawteCA.pem radiusd -X rlm_eap: SSL error error:0906D06C:PEM routines:PEM_read_bio:no start line rlm_eap_tls: Error reading private key file /etc/raddb/certs/trialThawte.pem rlm_eap: Failed to initialize type tls Tried to make .pem by following commands (use server.key, server.csr were inputted to make Thawte certificate; server.crt is received Thawte certificate): openssl pkcs12 -export -in server.crt -inkey server.key -out server.p12 -passin pass:1234 -passout pass:1234 unable to load private key 139734217189032:error:06065064:digital envelope routines:EVP_DecryptFinal_ex:bad decrypt:evp_enc.c:467: 139734217189032:error:0906A065:PEM routines:PEM_do_header:bad decrypt:pem_lib.c:476: openssl pkcs12 -in server.crt -out server.pem -passin pass:12345 -passout pass:12345 140259536533160:error:0D0680A8:asn1 encoding routines:ASN1_CHECK_TLEN:wrong tag:tasn_dec.c:1319: 140259536533160:error:0D07803A:asn1 encoding routines:ASN1_ITEM_EX_D2I:nested asn1 error:tasn_dec.c:381:Type=PKCS12 I confused that: 1. no passwords in received Thawte certificates 2. Root CA and Web Server CA 3. different pem format is used in RADIUS and is received from Thawte What algorithm should be used to make valid to FreeRADIUS pem certificate files from these Thawte certificates? FreeRADIUS Version 2.1.7, for host x86_64-pc-linux-gnu -- Best Regards, Shildyakov Alexey Vladimirovich

2 2

Re: "use_tunnel_reply" not working in EAP-PEAP (Proxied as plain MSCHAPv2) in eap.conf
by Nitin Bhardwaj 06 Jul '11

06 Jul '11

> On 07/05/2011 06:03 PM, Nitin Bhardwaj wrote: > > Hello All, > > I'm using FreeRADIUS 2.1.11 as a proxy for authenticating PEAP > clients with RADIUS server not supporting EAP. > > All is working well except that when I use > "proxy_tunneled_request_as_eap = no" in eap.conf, FreeRADIUS is not > passing back all the AVPs sent by RADIUS server in > Access-Accept(MSCHAPv2) to the Client, only few ones. > > Be specific. Which ones? > > Better yet, show a debug of it not working. > > > But when I set it as "proxy_tunneled_request_as_eap = yes", > FreeRADIUS is relaying back all the AVPs received from the RADIUS > server properly. > > > eap.conf: ------------ eap { peap { copy_request_to_tunnel = yes > use_tunneled_reply = yes proxy_tunneled_request_as_eap = no > virtual_server = "proxy-inner-tunnel" } } > > Hence, in spite of setting "use_tunneled_reply = yes", why isnt FR > copying all attributes in Access-Accept back to client ? Is this some > bug, fixed in 3.x ? > > 3.x is not released yet. > > I don't think there are any fixed related to this in "master" (to > become 3.x) but there might be; please provide more details as above, > so we can try to reproduce. Sorry, I was not clear enough earlier. This is an issue same as the one mentioned in this query: http://lists.freeradius.org/mailman/htdig/freeradius-users/2009-September/m… The RADIUS server is sending the following extra AVPs in Access-Accept to FR: Session-Timeout = 300 Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "12" Tunnel-Type:0 = VLAN But FR is eating them up while relaying the Access-Accept back to Client. The Access-Accept from RADIUS server is as follows: ---------------------------------- rad_recv: Access-Accept packet from host 172.19.6.4 port 1812, id=61, length=252 Proxy-State = 0x323036 Session-Timeout = 300 Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "12" Tunnel-Type:0 = VLAN Framed-Protocol = PPP Service-Type = Framed-User Class = 0xc9200b0c0000013700011700fe8000000000000080c45c2695c095c501cc37ebc8773ae80000000000000375 MS-MPPE-Recv-Key = 0x7bc8d45a5aca15f9dabb55d02ecd8dab MS-MPPE-Send-Key = 0x5ae7592c6feef640cc81d0b52d667f63 MS-CHAP2-Success = 0x09533d45443743394537393743444439334244463930453946394243393236363844304543394330423537 MS-CHAP-Domain = "\tDEV" ---------------------------------- But the relayed Access-Accept to client is: ---------------------------------- Sending Access-Accept of id 208 to 172.18.10.13 port 48852 User-Name = "meru" MS-MPPE-Recv-Key = 0x6c6c3b63a0c60545b9838c0cc766db98987516f92c12bac6bb6694acd4defe16 MS-MPPE-Send-Key = 0xbcb242cdac92ca3620e6a660d60e3838acbeddaef9b8766121730c7a4f2f0f79 EAP-Message = 0x030b0004 Message-Authenticator = 0x00000000000000000000000000000000 ---------------------------------- My settings are as follows: eap.conf: -------------- eap { tls{ //Usual stuff <snip....> } peap { default_eap_type = mschapv2 copy_request_to_tunnel = yes use_tunneled_reply = yes proxy_tunneled_request_as_eap = no virtual_server = "proxy-inner-tunnel" } mchapv2 { } } sites-enabled/proxy-inner-tunnel: ----------------------------------------------- server proxy-inner-tunnel { authorize { update control { # You should update this to be one of your realms. Proxy-To-Realm := "DEVLAB" } authenticate { eap } post-proxy { eap } } FR relays all packets properly back to Client when I use "proxy_tunneled_request_as_eap = yes" in eap.conf. But I cannot do that way because the RADIUS server doesn't understand EAP at all - I need to send a plain MSCHAPv2 in the inner request. I thought using "use_tunneled_reply = yes" should have caused FR to relay back all the AVPs back to outer tunnel, but its not working. The full log is as follows: ------------------------------------------------ [root@nitin-centos ~]# radiusd -X FreeRADIUS Version 2.1.11, for host i686-pc-linux-gnu, built on Jul 5 2011 at 19:03:48 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /usr/local/etc/raddb/radiusd.conf including configuration file /usr/local/etc/raddb/proxy.conf including configuration file /usr/local/etc/raddb/clients.conf including files in directory /usr/local/etc/raddb/modules/ including configuration file /usr/local/etc/raddb/modules/radutmp including configuration file /usr/local/etc/raddb/modules/smsotp including configuration file /usr/local/etc/raddb/modules/logintime including configuration file /usr/local/etc/raddb/modules/rediswho including configuration file /usr/local/etc/raddb/modules/etc_group including configuration file /usr/local/etc/raddb/modules/sradutmp including configuration file /usr/local/etc/raddb/modules/linelog including configuration file /usr/local/etc/raddb/modules/ntlm_auth including configuration file /usr/local/etc/raddb/modules/attr_rewrite including configuration file /usr/local/etc/raddb/modules/detail including configuration file /usr/local/etc/raddb/modules/detail.log including configuration file /usr/local/etc/raddb/modules/expr including configuration file /usr/local/etc/raddb/modules/wimax including configuration file /usr/local/etc/raddb/modules/acct_unique including configuration file /usr/local/etc/raddb/modules/mschap including configuration file /usr/local/etc/raddb/modules/detail.example.com including configuration file /usr/local/etc/raddb/modules/replicate including configuration file /usr/local/etc/raddb/modules/soh including configuration file /usr/local/etc/raddb/modules/otp including configuration file /usr/local/etc/raddb/modules/preprocess including configuration file /usr/local/etc/raddb/modules/expiration including configuration file /usr/local/etc/raddb/modules/echo including configuration file /usr/local/etc/raddb/modules/krb5 including configuration file /usr/local/etc/raddb/modules/mac2ip including configuration file /usr/local/etc/raddb/modules/mac2vlan including configuration file /usr/local/etc/raddb/modules/checkval including configuration file /usr/local/etc/raddb/modules/chap including configuration file /usr/local/etc/raddb/modules/redis including configuration file /usr/local/etc/raddb/modules/passwd including configuration file /usr/local/etc/raddb/modules/always including configuration file /usr/local/etc/raddb/modules/pam including configuration file /usr/local/etc/raddb/modules/policy including configuration file /usr/local/etc/raddb/modules/cui including configuration file /usr/local/etc/raddb/modules/digest including configuration file /usr/local/etc/raddb/modules/unix including configuration file /usr/local/etc/raddb/modules/realm including configuration file /usr/local/etc/raddb/modules/sql_log including configuration file /usr/local/etc/raddb/modules/opendirectory including configuration file /usr/local/etc/raddb/modules/dynamic_clients including configuration file /usr/local/etc/raddb/modules/exec including configuration file /usr/local/etc/raddb/modules/files including configuration file /usr/local/etc/raddb/modules/counter including configuration file /usr/local/etc/raddb/modules/pap including configuration file /usr/local/etc/raddb/modules/sqlcounter_expire_on_login including configuration file /usr/local/etc/raddb/modules/attr_filter including configuration file /usr/local/etc/raddb/modules/ippool including configuration file /usr/local/etc/raddb/modules/perl including configuration file /usr/local/etc/raddb/modules/smbpasswd including configuration file /usr/local/etc/raddb/modules/inner-eap including configuration file /usr/local/etc/raddb/modules/ldap including configuration file /usr/local/etc/raddb/eap.conf including configuration file /usr/local/etc/raddb/policy.conf including files in directory /usr/local/etc/raddb/sites-enabled/ including configuration file /usr/local/etc/raddb/sites-enabled/default including configuration file /usr/local/etc/raddb/sites-enabled/proxy-inner-tunnel including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel including configuration file /usr/local/etc/raddb/sites-enabled/control-socket main { allow_core_dumps = no } including dictionary file /usr/local/etc/raddb/dictionary main { name = "radiusd" prefix = "/usr/local" localstatedir = "/usr/local/var" sbindir = "/usr/local/sbin" logdir = "/usr/local/var/log/radius" run_dir = "/usr/local/var/run/radiusd" libdir = "/usr/local/lib" radacctdir = "/usr/local/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/usr/local/var/run/radiusd/radiusd.pid" checkrad = "/usr/local/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 require_message_authenticator = yes zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } realm DEVLAB { authhost = 172.19.6.4 secret = meru2002 } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } client 172.18.10.13 { require_message_authenticator = no secret = "meru2002" nastype = "other" } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating module "exec" from file /usr/local/etc/raddb/modules/exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating module "expr" from file /usr/local/etc/raddb/modules/expr Module: Linked to module rlm_expiration Module: Instantiating module "expiration" from file /usr/local/etc/raddb/modules/expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating module "logintime" from file /usr/local/etc/raddb/modules/logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server { # from file /usr/local/etc/raddb/radiusd.conf modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating module "pap" from file /usr/local/etc/raddb/modules/pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating module "chap" from file /usr/local/etc/raddb/modules/chap Module: Linked to module rlm_mschap Module: Instantiating module "mschap" from file /usr/local/etc/raddb/modules/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no allow_retry = yes } Module: Linked to module rlm_digest Module: Instantiating module "digest" from file /usr/local/etc/raddb/modules/digest Module: Linked to module rlm_unix Module: Instantiating module "unix" from file /usr/local/etc/raddb/modules/unix unix { radwtmp = "/usr/local/var/log/radius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating module "eap" from file /usr/local/etc/raddb/eap.conf eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 4096 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 CA_path = "/usr/local/etc/raddb/certs" pem_file_type = yes private_key_file = "/usr/local/etc/raddb/certs/server.pem" certificate_file = "/usr/local/etc/raddb/certs/server.pem" CA_file = "/usr/local/etc/raddb/certs/ca.pem" private_key_password = "whatever" dh_file = "/usr/local/etc/raddb/certs/dh" random_file = "/usr/local/etc/raddb/certs/random" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/usr/local/etc/raddb/certs/bootstrap" cache { enable = no lifetime = 24 max_entries = 255 } verify { } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = yes use_tunneled_reply = yes proxy_tunneled_request_as_eap = no virtual_server = "proxy-inner-tunnel" soh = no } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating module "preprocess" from file /usr/local/etc/raddb/modules/preprocess preprocess { huntgroups = "/usr/local/etc/raddb/huntgroups" hints = "/usr/local/etc/raddb/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Linked to module rlm_realm Module: Instantiating module "suffix" from file /usr/local/etc/raddb/modules/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating module "files" from file /usr/local/etc/raddb/modules/files files { usersfile = "/usr/local/etc/raddb/users" acctusersfile = "/usr/local/etc/raddb/acct_users" preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users" compat = "no" } Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating module "acct_unique" from file /usr/local/etc/raddb/modules/acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating module "detail" from file /usr/local/etc/raddb/modules/detail detail { detailfile = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Linked to module rlm_radutmp Module: Instantiating module "radutmp" from file /usr/local/etc/raddb/modules/radutmp radutmp { filename = "/usr/local/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Linked to module rlm_attr_filter Module: Instantiating module "attr_filter.accounting_response" from file /usr/local/etc/raddb/modules/attr_filter attr_filter attr_filter.accounting_response { attrsfile = "/usr/local/etc/raddb/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Instantiating module "attr_filter.access_reject" from file /usr/local/etc/raddb/modules/attr_filter attr_filter attr_filter.access_reject { attrsfile = "/usr/local/etc/raddb/attrs.access_reject" key = "%{User-Name}" } } # modules } # server server proxy-inner-tunnel { # from file /usr/local/etc/raddb/sites-enabled/proxy-inner-tunnel modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Checking post-proxy {...} for more modules to load } # modules } # server server inner-tunnel { # from file /usr/local/etc/raddb/sites-enabled/inner-tunnel modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } listen { type = "control" listen { socket = "/usr/local/var/run/radiusd/radiusd.sock" } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } ... adding new socket proxy address * port 44579 Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on command file /usr/local/var/run/radiusd/radiusd.sock Listening on authentication address 127.0.0.1 port 18120 as server inner-tunnel Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 172.18.10.13 port 48852, id=198, length=152 User-Name = "meru" NAS-IP-Address = 172.18.10.13 NAS-Port = 2049 Called-Station-Id = "00-90-0B-0A-9A-90:Starnet" Calling-Station-Id = "00-1A-73-9D-9D-02" Framed-MTU = 1250 NAS-Port-Type = Wireless-802.11 Framed-Compression = None Connect-Info = "CONNECT 802.11a" Chargeable-User-Identity = "\\0" EAP-Message = 0x02010009016d657275 Message-Authenticator = 0x960d94c0685c6dd5ba509de67f73d37a # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "meru", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 1 length 9 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] EAP Identity [eap] processing type md5 rlm_eap_md5: Issuing Challenge ++[eap] returns handled Sending Access-Challenge of id 198 to 172.18.10.13 port 48852 EAP-Message = 0x0102001604109fe03af8d36fe702cf4550cf1f8c0622 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xfde30c7afde108730ebe85102c777b46 Finished request 0. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 172.18.10.13 port 48852, id=199, length=167 User-Name = "meru" NAS-IP-Address = 172.18.10.13 NAS-Port = 2049 Called-Station-Id = "00-90-0B-0A-9A-90:Starnet" Calling-Station-Id = "00-1A-73-9D-9D-02" Framed-MTU = 1250 NAS-Port-Type = Wireless-802.11 Framed-Compression = None Connect-Info = "CONNECT 802.11a" Chargeable-User-Identity = "\\0" EAP-Message = 0x020200060319 State = 0xfde30c7afde108730ebe85102c777b46 Message-Authenticator = 0x9f1b4526ff2f96a96aae56daf8c0c317 # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "meru", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 2 length 6 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP NAK [eap] EAP-NAK asked for EAP-Type/peap [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 199 to 172.18.10.13 port 48852 EAP-Message = 0x010300061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xfde30c7afce015730ebe85102c777b46 Finished request 1. Going to the next request Waking up in 4.8 seconds. rad_recv: Access-Request packet from host 172.18.10.13 port 48852, id=200, length=243 User-Name = "meru" NAS-IP-Address = 172.18.10.13 NAS-Port = 2049 Called-Station-Id = "00-90-0B-0A-9A-90:Starnet" Calling-Station-Id = "00-1A-73-9D-9D-02" Framed-MTU = 1250 NAS-Port-Type = Wireless-802.11 Framed-Compression = None Connect-Info = "CONNECT 802.11a" Chargeable-User-Identity = "\\0" EAP-Message = 0x0203005219800000004816030100430100003f03014c32bfcfbdd3039d0bcab75c921dd349c355de3f12bc41174c7fdd579d1e3c9200001800390038003300320016001300660035002f000a000500040100 State = 0xfde30c7afce015730ebe85102c777b46 Message-Authenticator = 0xcb652a53a53fcfdfa58375d9b220dd1f # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "meru", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 3 length 82 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 72 [peap] Length Included [peap] eaptls_verify returned 11 [peap] (other): before/accept initialization [peap] TLS_accept: before/accept initialization [peap] <<< TLS 1.0 Handshake [length 0043], ClientHello [peap] TLS_accept: SSLv3 read client hello A [peap] >>> TLS 1.0 Handshake [length 002a], ServerHello [peap] TLS_accept: SSLv3 write server hello A [peap] >>> TLS 1.0 Handshake [length 085e], Certificate [peap] TLS_accept: SSLv3 write certificate A [peap] >>> TLS 1.0 Handshake [length 020d], ServerKeyExchange [peap] TLS_accept: SSLv3 write key exchange A [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [peap] TLS_accept: SSLv3 write server done A [peap] TLS_accept: SSLv3 flush data [peap] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 200 to 172.18.10.13 port 48852 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0xa73082038fa0030201020209 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xfde30c7affe715730ebe85102c777b46 Finished request 2. Going to the next request Waking up in 4.7 seconds. rad_recv: Access-Request packet from host 172.18.10.13 port 48852, id=201, length=167 User-Name = "meru" NAS-IP-Address = 172.18.10.13 NAS-Port = 2049 Called-Station-Id = "00-90-0B-0A-9A-90:Starnet" Calling-Station-Id = "00-1A-73-9D-9D-02" Framed-MTU = 1250 NAS-Port-Type = Wireless-802.11 Framed-Compression = None Connect-Info = "CONNECT 802.11a" Chargeable-User-Identity = "\\0" EAP-Message = 0x020400061900 State = 0xfde30c7affe715730ebe85102c777b46 Message-Authenticator = 0xb44bb5aa230ad5e60d13eddafd1dbe7c # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "meru", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 4 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 201 to 172.18.10.13 port 48852 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0xe005f788e24cb66e Message-Authenticator = 0x00000000000000000000000000000000 State = 0xfde30c7afee615730ebe85102c777b46 Finished request 3. Going to the next request Waking up in 4.6 seconds. rad_recv: Access-Request packet from host 172.18.10.13 port 48852, id=202, length=167 User-Name = "meru" NAS-IP-Address = 172.18.10.13 NAS-Port = 2049 Called-Station-Id = "00-90-0B-0A-9A-90:Starnet" Calling-Station-Id = "00-1A-73-9D-9D-02" Framed-MTU = 1250 NAS-Port-Type = Wireless-802.11 Framed-Compression = None Connect-Info = "CONNECT 802.11a" Chargeable-User-Identity = "\\0" EAP-Message = 0x020500061900 State = 0xfde30c7afee615730ebe85102c777b46 Message-Authenticator = 0xe812ebc412f80a25bd7498462aa6e62b # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "meru", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 5 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 202 to 172.18.10.13 port 48852 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x3f7656fad6b6db3b6aabdf97a039bc944b257676000e58f16d041545e8fe965412ce2178d6a7ae69499986dfe99ff955bfb985a49e9d05107ad218622a99f5d29a5bfe8d3acfc5f156e04d700d611c1d5cb3e00e6ba986f8bf5b236c8741b5fa3293ddae6e0279c613fdd72d68af1f6ad512d9b858f59dae29a4b945235c89fe55ce40e14b58dc51c80f253c9a3e8ecfdf22fab4d162dbc87ebb06093cd02e3dd6bae646050ab8642ecf14213423f142f8ea4d35243dd51660446270dbdf7fd2ef48280b16030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xfde30c7af9e515730ebe85102c777b46 Finished request 4. Going to the next request Waking up in 4.5 seconds. rad_recv: Access-Request packet from host 172.18.10.13 port 48852, id=203, length=369 User-Name = "meru" NAS-IP-Address = 172.18.10.13 NAS-Port = 2049 Called-Station-Id = "00-90-0B-0A-9A-90:Starnet" Calling-Station-Id = "00-1A-73-9D-9D-02" Framed-MTU = 1250 NAS-Port-Type = Wireless-802.11 Framed-Compression = None Connect-Info = "CONNECT 802.11a" Chargeable-User-Identity = "\\0" EAP-Message = 0x020600d01980000000c616030100861000008200809a0c1bb68594ead0d108df37ab090c5ae82bbe69eee7b73f693f11bc68cd29f637eb8f4faf9a272f513c954cfcea094707e2af32c4e2b55d3a646126d249fd5fb7e1bd4e8288bf086aae28b808135864eb005218ea8d9a54481f4d43c7fb5368814aaac3a63100a32249d7e68f3b9dccf0d922c2d12c9c2b146232e496fe0bc81403010001011603010030840c77df284213f438f3551d62a3d4c9470e0ea6366e1b39d34f137f5c78d2891eb30875669d688fccf0e61e1da243c6 State = 0xfde30c7af9e515730ebe85102c777b46 Message-Authenticator = 0x88bb2bb9ca1a313aee2de681d281f0c3 # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "meru", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 6 length 208 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 198 [peap] Length Included [peap] eaptls_verify returned 11 [peap] <<< TLS 1.0 Handshake [length 0086], ClientKeyExchange [peap] TLS_accept: SSLv3 read client key exchange A [peap] <<< TLS 1.0 ChangeCipherSpec [length 0001] [peap] <<< TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 read finished A [peap] >>> TLS 1.0 ChangeCipherSpec [length 0001] [peap] TLS_accept: SSLv3 write change cipher spec A [peap] >>> TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 write finished A [peap] TLS_accept: SSLv3 flush data [peap] (other): SSL negotiation finished successfully SSL Connection Established [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 203 to 172.18.10.13 port 48852 EAP-Message = 0x01070041190014030100010116030100303b23c31a29c705c25db0839a53e947b05d465fbd30c13653d3b8352bd088325b17a3151fd321e457c5d469e8ca818560 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xfde30c7af8e415730ebe85102c777b46 Finished request 5. Going to the next request Waking up in 4.4 seconds. rad_recv: Access-Request packet from host 172.18.10.13 port 48852, id=204, length=167 User-Name = "meru" NAS-IP-Address = 172.18.10.13 NAS-Port = 2049 Called-Station-Id = "00-90-0B-0A-9A-90:Starnet" Calling-Station-Id = "00-1A-73-9D-9D-02" Framed-MTU = 1250 NAS-Port-Type = Wireless-802.11 Framed-Compression = None Connect-Info = "CONNECT 802.11a" Chargeable-User-Identity = "\\0" EAP-Message = 0x020700061900 State = 0xfde30c7af8e415730ebe85102c777b46 Message-Authenticator = 0xb1f44972992610c36bf8c5898b636d38 # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "meru", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 7 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake is finished [peap] eaptls_verify returned 3 [peap] eaptls_process returned 3 [peap] EAPTLS_SUCCESS [peap] Session established. Decoding tunneled attributes. [peap] Peap state TUNNEL ESTABLISHED ++[eap] returns handled Sending Access-Challenge of id 204 to 172.18.10.13 port 48852 EAP-Message = 0x0108002b190017030100206d1d6355f7e57d3754317857539e1a39325b6ecef30c90efef64a20af81c024f Message-Authenticator = 0x00000000000000000000000000000000 State = 0xfde30c7afbeb15730ebe85102c777b46 Finished request 6. Going to the next request Waking up in 4.3 seconds. rad_recv: Access-Request packet from host 172.18.10.13 port 48852, id=205, length=204 User-Name = "meru" NAS-IP-Address = 172.18.10.13 NAS-Port = 2049 Called-Station-Id = "00-90-0B-0A-9A-90:Starnet" Calling-Station-Id = "00-1A-73-9D-9D-02" Framed-MTU = 1250 NAS-Port-Type = Wireless-802.11 Framed-Compression = None Connect-Info = "CONNECT 802.11a" Chargeable-User-Identity = "\\0" EAP-Message = 0x0208002b19001703010020625a119fe356dba5d6f7cf76e4d054c2241fb52f16778532b4f8004d14d1d4a6 State = 0xfde30c7afbeb15730ebe85102c777b46 Message-Authenticator = 0x2c2cd6601cd01b1317d2dc7594348bc0 # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "meru", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 8 length 43 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state WAITING FOR INNER IDENTITY [peap] Identity - meru [peap] Got inner identity 'meru' [peap] Setting default EAP type for tunneled EAP session. [peap] Got tunneled request EAP-Message = 0x02080009016d657275 server { [peap] Setting User-Name to meru Sending tunneled request EAP-Message = 0x02080009016d657275 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "meru" NAS-IP-Address = 172.18.10.13 NAS-Port = 2049 Called-Station-Id = "00-90-0B-0A-9A-90:Starnet" Calling-Station-Id = "00-1A-73-9D-9D-02" Framed-MTU = 1250 NAS-Port-Type = Wireless-802.11 Framed-Compression = None Connect-Info = "CONNECT 802.11a" Chargeable-User-Identity = "\\0" server proxy-inner-tunnel { # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/proxy-inner-tunnel +- entering group authorize {...} ++[control] returns notfound } # server proxy-inner-tunnel [peap] Got tunneled reply code 0 PEAP: Calling authenticate in order to initiate tunneled EAP session. # Executing group from file /usr/local/etc/raddb/sites-enabled/proxy-inner-tunnel +- entering group authenticate {...} [eap] EAP Identity [eap] processing type mschapv2 rlm_eap_mschapv2: Issuing Challenge ++[eap] returns handled PEAP: Cancelling proxy to realm DEVLAB until the tunneled EAP session has been established [peap] Got tunneled reply RADIUS code 11 EAP-Message = 0x0109001e1a01090019105ba435e766423f0a72c901045f0a25886d657275 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xd4dbdf6bd4d2c5452b3f3ec10bc32a7c [peap] Got tunneled Access-Challenge ++[eap] returns handled Sending Access-Challenge of id 205 to 172.18.10.13 port 48852 EAP-Message = 0x0109003b1900170301003089452af1f3e64ab01e961a4b2dc9b0c13a90fc86e1da452b46c781c6c3aa4e465324742d29a8a5983bddf45bec669947 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xfde30c7afaea15730ebe85102c777b46 Finished request 7. Going to the next request Waking up in 4.2 seconds. rad_recv: Access-Request packet from host 172.18.10.13 port 48852, id=206, length=252 User-Name = "meru" NAS-IP-Address = 172.18.10.13 NAS-Port = 2049 Called-Station-Id = "00-90-0B-0A-9A-90:Starnet" Calling-Station-Id = "00-1A-73-9D-9D-02" Framed-MTU = 1250 NAS-Port-Type = Wireless-802.11 Framed-Compression = None Connect-Info = "CONNECT 802.11a" Chargeable-User-Identity = "\\0" EAP-Message = 0x0209005b19001703010050934ee8273bff98e2ce4cd7af01b43419b36b17024edcb9e1f3fb99cb52c22c03c0b565e7a69dbe1424a68753ec8c2f2a596ac4a666a04d1dc85112f833bda916d4fcec71ffe2ee65140c2e8d059be1b0 State = 0xfde30c7afaea15730ebe85102c777b46 Message-Authenticator = 0x891db7ed9a95c5ffd9b0b427cac19ead # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "meru", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 9 length 91 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state phase2 [peap] EAP type mschapv2 [peap] Got tunneled request EAP-Message = 0x0209003f1a0209003a3189b9b07dd80ec546dc6e53d639c2964b00000000000000001e004f700b8f899e45e562bc9489b09059eed69663519cb8006d657275 server { [peap] Setting User-Name to meru Sending tunneled request EAP-Message = 0x0209003f1a0209003a3189b9b07dd80ec546dc6e53d639c2964b00000000000000001e004f700b8f899e45e562bc9489b09059eed69663519cb8006d657275 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "meru" State = 0xd4dbdf6bd4d2c5452b3f3ec10bc32a7c NAS-IP-Address = 172.18.10.13 NAS-Port = 2049 Called-Station-Id = "00-90-0B-0A-9A-90:Starnet" Calling-Station-Id = "00-1A-73-9D-9D-02" Framed-MTU = 1250 NAS-Port-Type = Wireless-802.11 Framed-Compression = None Connect-Info = "CONNECT 802.11a" Chargeable-User-Identity = "\\0" server proxy-inner-tunnel { # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/proxy-inner-tunnel +- entering group authorize {...} ++[control] returns notfound } # server proxy-inner-tunnel [peap] Got tunneled reply code 0 PEAP: Calling authenticate in order to initiate tunneled EAP session. # Executing group from file /usr/local/etc/raddb/sites-enabled/proxy-inner-tunnel +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/mschapv2 [eap] processing type mschapv2 [eap] Not-EAP proxy set. Not composing EAP ++[eap] returns handled PEAP: Tunneled authentication will be proxied to DEVLAB PEAP: Remembering to do EAP-MS-CHAP-V2 post-proxy. [eap] Tunneled session will be proxied. Not doing EAP. ++[eap] returns handled WARNING: Empty pre-proxy section. Using default return values. Sending Access-Request of id 61 to 172.19.6.4 port 1812 User-Name = "meru" NAS-IP-Address = 172.18.10.13 NAS-Port = 2049 Called-Station-Id = "00-90-0B-0A-9A-90:Starnet" Calling-Station-Id = "00-1A-73-9D-9D-02" Framed-MTU = 1250 NAS-Port-Type = Wireless-802.11 Framed-Compression = None Connect-Info = "CONNECT 802.11a" Chargeable-User-Identity = "\\0" MS-CHAP-Challenge = 0x5ba435e766423f0a72c901045f0a2588 MS-CHAP2-Response = 0x096589b9b07dd80ec546dc6e53d639c2964b00000000000000001e004f700b8f899e45e562bc9489b09059eed69663519cb8 Proxy-State = 0x323036 Proxying request 8 to home server 172.19.6.4 port 1812 Sending Access-Request of id 61 to 172.19.6.4 port 1812 User-Name = "meru" NAS-IP-Address = 172.18.10.13 NAS-Port = 2049 Called-Station-Id = "00-90-0B-0A-9A-90:Starnet" Calling-Station-Id = "00-1A-73-9D-9D-02" Framed-MTU = 1250 NAS-Port-Type = Wireless-802.11 Framed-Compression = None Connect-Info = "CONNECT 802.11a" Chargeable-User-Identity = "\\0" MS-CHAP-Challenge = 0x5ba435e766423f0a72c901045f0a2588 MS-CHAP2-Response = 0x096589b9b07dd80ec546dc6e53d639c2964b00000000000000001e004f700b8f899e45e562bc9489b09059eed69663519cb8 Proxy-State = 0x323036 Going to the next request Waking up in 0.9 seconds. rad_recv: Access-Accept packet from host 172.19.6.4 port 1812, id=61, length=252 Proxy-State = 0x323036 Session-Timeout = 300 Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "12" Tunnel-Type:0 = VLAN Framed-Protocol = PPP Service-Type = Framed-User Class = 0xc9200b0c0000013700011700fe8000000000000080c45c2695c095c501cc37ebc8773ae80000000000000375 MS-MPPE-Recv-Key = 0x7bc8d45a5aca15f9dabb55d02ecd8dab MS-MPPE-Send-Key = 0x5ae7592c6feef640cc81d0b52d667f63 MS-CHAP2-Success = 0x09533d45443743394537393743444439334244463930453946394243393236363844304543394330423537 MS-CHAP-Domain = "\tDEV" # Executing section post-proxy from file /usr/local/etc/raddb/sites-enabled/default +- entering group post-proxy {...} [eap] Doing post-proxy callback [eap] Passing reply from proxy back into the tunnel. server proxy-inner-tunnel { [eap] Passing reply back for EAP-MS-CHAP-V2 # Executing section post-proxy from file /usr/local/etc/raddb/sites-enabled/proxy-inner-tunnel +- entering group post-proxy {...} [eap] Doing post-proxy callback rlm_eap_mschapv2: Passing reply from proxy back into the tunnel 0x8c91600 2. rlm_eap_mschapv2: Authentication succeeded. MSCHAP Success ++[eap] returns ok WARNING: Empty post-auth section. Using default return values. } # server proxy-inner-tunnel [eap] Final reply from tunneled session code 11 Proxy-State = 0x323036 Session-Timeout = 300 Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "12" Tunnel-Type:0 = VLAN Framed-Protocol = PPP Service-Type = Framed-User Class = 0xc9200b0c0000013700011700fe8000000000000080c45c2695c095c501cc37ebc8773ae80000000000000375 MS-CHAP-Domain = "\tDEV" EAP-Message = 0x010a00331a0309002e533d45443743394537393743444439334244463930453946394243393236363844304543394330423537 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xd4dbdf6bd5d1c5452b3f3ec10bc32a7c [eap] Got reply 11 [eap] Got tunneled reply RADIUS code 11 Proxy-State = 0x323036 Session-Timeout = 300 Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "12" Tunnel-Type:0 = VLAN Framed-Protocol = PPP Service-Type = Framed-User Class = 0xc9200b0c0000013700011700fe8000000000000080c45c2695c095c501cc37ebc8773ae80000000000000375 MS-CHAP-Domain = "\tDEV" EAP-Message = 0x010a00331a0309002e533d45443743394537393743444439334244463930453946394243393236363844304543394330423537 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xd4dbdf6bd5d1c5452b3f3ec10bc32a7c [eap] Got tunneled Access-Challenge [eap] Saving tunneled attributes for later [eap] Reply was handled ++[eap] returns ok Sending Access-Challenge of id 206 to 172.18.10.13 port 48852 EAP-Message = 0x010a005b1900170301005017c5dbce0bb69cfd09fd41a5773d61f811bcf2ce164c32346899a98a231010fef71b89c1aed9412bc615a0d2c86595e420e4bd7f3538b748e8825b5f7c275e51bab5a82ae5c4c15e303ccdbd9e909e1a Message-Authenticator = 0x00000000000000000000000000000000 State = 0xfde30c7af5e915730ebe85102c777b46 Finished request 8. Going to the next request Waking up in 4.1 seconds. rad_recv: Access-Request packet from host 172.18.10.13 port 48852, id=207, length=204 User-Name = "meru" NAS-IP-Address = 172.18.10.13 NAS-Port = 2049 Called-Station-Id = "00-90-0B-0A-9A-90:Starnet" Calling-Station-Id = "00-1A-73-9D-9D-02" Framed-MTU = 1250 NAS-Port-Type = Wireless-802.11 Framed-Compression = None Connect-Info = "CONNECT 802.11a" Chargeable-User-Identity = "\\0" EAP-Message = 0x020a002b1900170301002010d201aca04a28ed500660ad0ea279183cf64cf8c3a2e5946a86d43567c9b7f7 State = 0xfde30c7af5e915730ebe85102c777b46 Message-Authenticator = 0xab4fe0c669c7850b88ad0a2ede3087e2 # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "meru", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 10 length 43 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state phase2 [peap] EAP type mschapv2 [peap] Got tunneled request EAP-Message = 0x020a00061a03 server { [peap] Setting User-Name to meru Sending tunneled request EAP-Message = 0x020a00061a03 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "meru" State = 0xd4dbdf6bd5d1c5452b3f3ec10bc32a7c NAS-IP-Address = 172.18.10.13 NAS-Port = 2049 Called-Station-Id = "00-90-0B-0A-9A-90:Starnet" Calling-Station-Id = "00-1A-73-9D-9D-02" Framed-MTU = 1250 NAS-Port-Type = Wireless-802.11 Framed-Compression = None Connect-Info = "CONNECT 802.11a" Chargeable-User-Identity = "\\0" server proxy-inner-tunnel { # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/proxy-inner-tunnel +- entering group authorize {...} ++[control] returns notfound } # server proxy-inner-tunnel [peap] Got tunneled reply code 0 PEAP: Calling authenticate in order to initiate tunneled EAP session. # Executing group from file /usr/local/etc/raddb/sites-enabled/proxy-inner-tunnel +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/mschapv2 [eap] processing type mschapv2 [eap] Freeing handler ++[eap] returns ok [peap] Got tunneled reply RADIUS code 2 MS-MPPE-Send-Key = 0x5ae7592c6feef640cc81d0b52d667f63 MS-MPPE-Recv-Key = 0x7bc8d45a5aca15f9dabb55d02ecd8dab EAP-Message = 0x030a0004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = "meru" [peap] Tunneled authentication was successful. [peap] SUCCESS [peap] Saving tunneled attributes for later ++[eap] returns handled Sending Access-Challenge of id 207 to 172.18.10.13 port 48852 EAP-Message = 0x010b002b19001703010020972594e10347244aac063470d19ff9c07f0b89472a6262ae06b555a8f266d39c Message-Authenticator = 0x00000000000000000000000000000000 State = 0xfde30c7af4e815730ebe85102c777b46 Finished request 9. Going to the next request Waking up in 4.0 seconds. rad_recv: Access-Request packet from host 172.18.10.13 port 48852, id=208, length=204 User-Name = "meru" NAS-IP-Address = 172.18.10.13 NAS-Port = 2049 Called-Station-Id = "00-90-0B-0A-9A-90:Starnet" Calling-Station-Id = "00-1A-73-9D-9D-02" Framed-MTU = 1250 NAS-Port-Type = Wireless-802.11 Framed-Compression = None Connect-Info = "CONNECT 802.11a" Chargeable-User-Identity = "\\0" EAP-Message = 0x020b002b1900170301002079ae2531cb0c20ac94b1150652cc1a83e2ebe697fe10e6d64b4a03ffd8f8bae1 State = 0xfde30c7af4e815730ebe85102c777b46 Message-Authenticator = 0xc8d498ff15ea96988f74edada8e319c1 # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "meru", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 11 length 43 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state send tlv success [peap] Received EAP-TLV response. [peap] Success [peap] Using saved attributes from the original Access-Accept User-Name = "meru" [eap] Freeing handler ++[eap] returns ok # Executing section post-auth from file /usr/local/etc/raddb/sites-enabled/default +- entering group post-auth {...} ++[exec] returns noop Sending Access-Accept of id 208 to 172.18.10.13 port 48852 User-Name = "meru" MS-MPPE-Recv-Key = 0x6c6c3b63a0c60545b9838c0cc766db98987516f92c12bac6bb6694acd4defe16 MS-MPPE-Send-Key = 0xbcb242cdac92ca3620e6a660d60e3838acbeddaef9b8766121730c7a4f2f0f79 EAP-Message = 0x030b0004 Message-Authenticator = 0x00000000000000000000000000000000 Finished request 10. Going to the next request Waking up in 3.9 seconds. Cleaning up request 0 ID 198 with timestamp +37 Waking up in 0.1 seconds. Cleaning up request 1 ID 199 with timestamp +37 Waking up in 0.1 seconds. Cleaning up request 2 ID 200 with timestamp +38 Cleaning up request 3 ID 201 with timestamp +38 Waking up in 0.1 seconds. Cleaning up request 4 ID 202 with timestamp +38 Waking up in 0.1 seconds. Cleaning up request 5 ID 203 with timestamp +38 Cleaning up request 6 ID 204 with timestamp +38 Waking up in 0.1 seconds. Cleaning up request 7 ID 205 with timestamp +38 Waking up in 0.1 seconds. Cleaning up request 8 ID 206 with timestamp +38 Cleaning up request 9 ID 207 with timestamp +38 Waking up in 0.1 seconds. Cleaning up request 10 ID 208 with timestamp +38 Ready to process requests. ----------------------------------------------- Please help. -- Nitin.

2 2