- Freeradius-Users - lists.freeradius.org

Auth-Type fail
by Bastien Semene 06 Jul '11

06 Jul '11

Hi list, I have problem authenticating users against (My)SQL. Freeradius is running on a FreeBSD 8.0-STABLE and is on version 2.1.10. It is a fresh install that I made work with the default file authentication. When I connect the SQL backend, it doesn't work. I followed the instructions on the FreeRADIUS wiki : http://wiki.freeradius.org/SQl_HOWTO The SQL module is correctly loaded and it returns an OK during authentication. The queries are well formed and the results should be ok What I don't understand is why sql module returns OK, and the authentication is rejected. In my mind, an OK from the SQL module at this step means it has authenticated the user. Am I misunderstanding ? The debug output and relevant configuration directives are below. P.S. : 10.1.8.4 is the IP of the server, I'm running radtest commands from this host (I can't use 127.0.0.1 because of how network currently works in jails on FreeBSD). Here is the output of the radtest command : # radtest bsemene test 10.1.8.4 0 "password for jail client" Sending Access-Request of id 214 to 10.1.8.4 port 1812 User-Name = "bsemene" User-Password = "test" NAS-IP-Address = 10.1.8.4 NAS-Port = 0 rad_recv: Access-Reject packet from host 10.1.8.4 port 1812, id=214, length=20 Here is the debug output during authentication : rad_recv: Access-Request packet from host 10.1.8.4 port 44065, id=138, length=59 User-Name = "bsemene" User-Password = "test" NAS-IP-Address = 10.1.8.4 NAS-Port = 0 # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "bsemene", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] No EAP-Message, not doing EAP ++[eap] returns noop ++[files] returns noop [sql] expand: %{Stripped-User-Name} -> [sql] ... expanding second conditional [sql] expand: %{User-Name} -> bsemene [sql] expand: %{%{User-Name}:-DEFAULT} -> bsemene [sql] expand: %{%{Stripped-User-Name}:-%{%{User-Name}:-DEFAULT}} -> bsemene [sql] sql_set_user escaped user --> 'bsemene' rlm_sql (sql): Reserving sql socket id: 4 [sql] expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = BINARY '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, opFROM radcheck WHERE username = BINARY 'bsemene' ORDER BY id [sql] expand: SELECT groupname FROM radusergroup WHERE username = BINARY '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHEe = BINARY 'bsemene' ORDER BY priority [sql] expand: SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{Sql-Group}' ORDER BY id -> SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = 'dynamic' ORDER BY id [sql] User found in group dynamic [sql] expand: SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{Sql-Group}' ORDER BY id -> SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = 'dynamic' ORDER BY id rlm_sql (sql): Released sql socket id: 4 ++[sql] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop ERROR: No authenticate method (Auth-Type) found for the request: Rejecting the user Failed to authenticate the user. Using Post-Auth-Type Reject # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> bsemene attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 0 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 0 Sending Access-Reject of id 138 to 10.1.8.4 port 44065 Waking up in 4.9 seconds. Cleaning up request 0 ID 138 with timestamp +4 Ready to process requests. Here are the (test) DB datas (sorry for the layout) : mysql> SELECT * FROM radusergroup; +----------+-----------+----------+ | username | groupname | priority | +----------+-----------+----------+ | bsemene | dynamic | 1 | +----------+-----------+----------+ 1 row in set (0.02 sec) mysql> SELECT * FROM radcheck; +----+----------+--------------------+----+-------+ | id | username | attribute | op | value | +----+----------+--------------------+----+-------+ | 1 | bsemene | Cleartext-Password | == | test | +----+----------+--------------------+----+-------+ 1 row in set (0.00 sec) mysql> SELECT * FROM radreply; Empty set (0.00 sec) mysql> SELECT * FROM radgroupreply; +----+-----------+------------+----+-------+ | id | groupname | attribute | op | value | +----+-----------+------------+----+-------+ | 1 | dynamic | Framed-MTU | := | 1500 | +----+-----------+------------+----+-------+ 1 row in set (0.02 sec) Here is the default site config : # cat sites-available/default | grep -v "^[[:space:]]*#" | grep -v "^$" [root@radius] authorize { preprocess chap mschap digest suffix eap { ok = return } files sql expiration logintime pap } authenticate { Auth-Type PAP { pap } Auth-Type CHAP { chap } Auth-Type MS-CHAP { mschap } digest unix eap } preacct { preprocess acct_unique suffix files } accounting { detail unix radutmp sql exec attr_filter.accounting_response } session { radutmp } post-auth { exec Post-Auth-Type REJECT { attr_filter.access_reject } } pre-proxy { } post-proxy { eap } And finally the service loading output : Starting radiusd. FreeRADIUS Version 2.1.10, for host i386-portbld-freebsd8.0, built on Jun 28 2011 at 16:08:13 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /usr/local/etc/raddb/radiusd.conf including configuration file /usr/local/etc/raddb/proxy.conf including configuration file /usr/local/etc/raddb/clients.conf including files in directory /usr/local/etc/raddb/modules/ including configuration file /usr/local/etc/raddb/modules/wimax including configuration file /usr/local/etc/raddb/modules/always including configuration file /usr/local/etc/raddb/modules/attr_filter including configuration file /usr/local/etc/raddb/modules/attr_rewrite including configuration file /usr/local/etc/raddb/modules/chap including configuration file /usr/local/etc/raddb/modules/checkval including configuration file /usr/local/etc/raddb/modules/counter including configuration file /usr/local/etc/raddb/modules/cui including configuration file /usr/local/etc/raddb/modules/detail including configuration file /usr/local/etc/raddb/modules/detail.example.com including configuration file /usr/local/etc/raddb/modules/detail.log including configuration file /usr/local/etc/raddb/modules/digest including configuration file /usr/local/etc/raddb/modules/dynamic_clients including configuration file /usr/local/etc/raddb/modules/echo including configuration file /usr/local/etc/raddb/modules/etc_group including configuration file /usr/local/etc/raddb/modules/exec including configuration file /usr/local/etc/raddb/modules/expiration including configuration file /usr/local/etc/raddb/modules/expr including configuration file /usr/local/etc/raddb/modules/files including configuration file /usr/local/etc/raddb/modules/inner-eap including configuration file /usr/local/etc/raddb/modules/ippool including configuration file /usr/local/etc/raddb/modules/krb5 including configuration file /usr/local/etc/raddb/modules/ldap including configuration file /usr/local/etc/raddb/modules/linelog including configuration file /usr/local/etc/raddb/modules/logintime including configuration file /usr/local/etc/raddb/modules/mac2ip including configuration file /usr/local/etc/raddb/modules/mschap including configuration file /usr/local/etc/raddb/modules/mac2vlan including configuration file /usr/local/etc/raddb/modules/ntlm_auth including configuration file /usr/local/etc/raddb/modules/opendirectory including configuration file /usr/local/etc/raddb/modules/otp including configuration file /usr/local/etc/raddb/modules/pam including configuration file /usr/local/etc/raddb/modules/pap including configuration file /usr/local/etc/raddb/modules/passwd including configuration file /usr/local/etc/raddb/modules/perl including configuration file /usr/local/etc/raddb/modules/policy including configuration file /usr/local/etc/raddb/modules/preprocess including configuration file /usr/local/etc/raddb/modules/radutmp including configuration file /usr/local/etc/raddb/modules/realm including configuration file /usr/local/etc/raddb/modules/smbpasswd including configuration file /usr/local/etc/raddb/modules/smsotp including configuration file /usr/local/etc/raddb/modules/sql_log including configuration file /usr/local/etc/raddb/modules/sqlcounter_expire_on_login including configuration file /usr/local/etc/raddb/modules/sradutmp including configuration file /usr/local/etc/raddb/modules/unix including configuration file /usr/local/etc/raddb/modules/acct_unique including configuration file /usr/local/etc/raddb/eap.conf including configuration file /usr/local/etc/raddb/sql.conf including configuration file /usr/local/etc/raddb/sql/mysql/dialup.conf including configuration file /usr/local/etc/raddb/policy.conf including files in directory /usr/local/etc/raddb/sites-enabled/ including configuration file /usr/local/etc/raddb/sites-enabled/default including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel including configuration file /usr/local/etc/raddb/sites-enabled/control-socket main { user = "freeradius" group = "freeradius" allow_core_dumps = no } including dictionary file /usr/local/etc/raddb/dictionary main { prefix = "/usr/local" localstatedir = "/var" logdir = "/var/log" libdir = "/usr/local/lib/freeradius-2.1.10" radacctdir = "/var/log/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/local/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 require_message_authenticator = yes zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 irt = 2 mrt = 16 mrc = 5 mrd = 30 } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } client jail { ipaddr = 10.1.8.4 require_message_authenticator = no secret = "password for jail client" nastype = "other" } client WAP1 { ipaddr = 10.1.8.127 require_message_authenticator = no secret = "password for remote client" nastype = "other" } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating module "exec" from file /usr/local/etc/raddb/modules/exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating module "expr" from file /usr/local/etc/raddb/modules/expr Module: Linked to module rlm_expiration Module: Instantiating module "expiration" from file /usr/local/etc/raddb/modules/expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating module "logintime" from file /usr/local/etc/raddb/modules/logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server inner-tunnel { # from file /usr/local/etc/raddb/sites-enabled/inner-tunnel modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating module "pap" from file /usr/local/etc/raddb/modules/pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating module "chap" from file /usr/local/etc/raddb/modules/chap Module: Linked to module rlm_mschap Module: Instantiating module "mschap" from file /usr/local/etc/raddb/modules/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no } Module: Linked to module rlm_unix Module: Instantiating module "unix" from file /usr/local/etc/raddb/modules/unix unix { radwtmp = "/var/log/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating module "eap" from file /usr/local/etc/raddb/eap.conf eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 4096 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 CA_path = "/etc/ssl/certs" pem_file_type = yes private_key_file = "/etc/ssl/certs/server.pem" certificate_file = "/etc/ssl/certs/server.pem" CA_file = "/etc/ssl/certs/ca.pem" private_key_password = "password" dh_file = "/etc/ssl/certs/dh" random_file = "/etc/ssl/certs/random" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/etc/ssl/certs/bootstrap" cache { enable = no lifetime = 24 max_entries = 255 } verify { } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating module "suffix" from file /usr/local/etc/raddb/modules/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating module "files" from file /usr/local/etc/raddb/modules/files files { usersfile = "/usr/local/etc/raddb/users" acctusersfile = "/usr/local/etc/raddb/acct_users" preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users" compat = "no" } Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating module "radutmp" from file /usr/local/etc/raddb/modules/radutmp radutmp { filename = "/var/log/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating module "attr_filter.access_reject" from file /usr/local/etc/raddb/modules/attr_filter attr_filter attr_filter.access_reject { attrsfile = "/usr/local/etc/raddb/attrs.access_reject" key = "%{User-Name}" } } # modules } # server server { # from file /usr/local/etc/raddb/radiusd.conf modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_digest Module: Instantiating module "digest" from file /usr/local/etc/raddb/modules/digest Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating module "preprocess" from file /usr/local/etc/raddb/modules/preprocess preprocess { huntgroups = "/usr/local/etc/raddb/huntgroups" hints = "/usr/local/etc/raddb/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Linked to module rlm_sql Module: Instantiating module "sql" from file /usr/local/etc/raddb/sql.conf sql { driver = "rlm_sql_mysql" server = "ip.of.SQL.server" port = "" login = "username" password = "password" radius_db = "dbname" read_groups = yes sqltrace = no sqltracefile = "/var/log/sqltrace.sql" readclients = no deletestalesessions = yes num_sql_socks = 5 lifetime = 0 max_queries = 0 sql_user_name = "%{%{Stripped-User-Name}:-%{%{User-Name}:-DEFAULT}}" default_user_profile = "" nas_query = "SELECT id, nasname, shortname, type, secret, server FROM nas" authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = BINARY '%{SQL-User-Name}' ORDER BY id" authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = BINARY '%{SQL-User-Name}' ORDER BY id" authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{Sql-Group}' ORDER BY id" authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{Sql-Group}' ORDER BY id" accounting_onoff_query = " UPDATE radacct SET acctstoptime = '%S', acctsessiontime = unix_timestamp('%S') - accounting_update_query = " UPDATE radacct SET framedipaddress = '%{Framed-IP-Address}', acctsessiontime = '%{Acct-Session-Time}', accounting_update_query_alt = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, accounting_start_query = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, n accounting_start_query_alt = " UPDATE radacct SET acctstarttime = '%S', acctstartdelay = '%{%{Acct-Delay-Time}:-0}', connectinfo_start accounting_stop_query = " UPDATE radacct SET acctstoptime = '%S', acctsessiontime = '%{Acct-Session-Time}', acctinputoctets = '%{ accounting_stop_query_alt = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctsta group_membership_query = "SELECT groupname FROM radusergroup WHERE username = BINARY '%{SQL-User-Name}' ORDER BY priority" connect_failure_retry_delay = 60 simul_count_query = "" simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, fra postauth_query = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{User-Name}', safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" } rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked rlm_sql (sql): Attempting to connect to radius@mysql.it.cyanide-studio.com:/radius rlm_sql (sql): starting 0 rlm_sql (sql): Attempting to connect rlm_sql_mysql #0 rlm_sql_mysql: Starting connect to MySQL server for #0 rlm_sql (sql): Connected new DB handle, #0 rlm_sql (sql): starting 1 rlm_sql (sql): Attempting to connect rlm_sql_mysql #1 rlm_sql_mysql: Starting connect to MySQL server for #1 rlm_sql (sql): Connected new DB handle, #1 rlm_sql (sql): starting 2 rlm_sql (sql): Attempting to connect rlm_sql_mysql #2 rlm_sql_mysql: Starting connect to MySQL server for #2 rlm_sql (sql): Connected new DB handle, #2 rlm_sql (sql): starting 3 rlm_sql (sql): Attempting to connect rlm_sql_mysql #3 rlm_sql_mysql: Starting connect to MySQL server for #3 rlm_sql (sql): Connected new DB handle, #3 rlm_sql (sql): starting 4 rlm_sql (sql): Attempting to connect rlm_sql_mysql #4 rlm_sql_mysql: Starting connect to MySQL server for #4 rlm_sql (sql): Connected new DB handle, #4 Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating module "acct_unique" from file /usr/local/etc/raddb/modules/acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating module "detail" from file /usr/local/etc/raddb/modules/detail detail { detailfile = "/var/log/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Instantiating module "attr_filter.accounting_response" from file /usr/local/etc/raddb/modules/attr_filter attr_filter attr_filter.accounting_response { attrsfile = "/usr/local/etc/raddb/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } listen { type = "control" listen { socket = "/var/run/radiusd/radiusd.sock" } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on command file /var/run/radiusd/radiusd.sock Listening on authentication address 10.1.8.4 port 18120 as server inner-tunnel Listening on proxy address * port 1814 Ready to process requests. -- Bastien Semene Administrateur Réseau& Système Cyanide Studio - FRANCE -- If you think experts are expensive, wait to see what amateurs will cost you -- Bastien Semene Administrateur Réseau& Système Cyanide Studio - FRANCE

2 2

Macbook Freeradius connection issue
by Lionne Stangier 06 Jul '11

06 Jul '11

Hi, We use FreeRadius 2.1.9. It works fine, but Macbook user can't connect. I have to activate only TTLS and PEAP in WLAN settings (802.1x) on the macbook, then it works. Do exist any other possibility for MAC user? PLZ help :) Lionne Stangier ---------------------------------------------------------------------------- Lionne-Jeremias Stangier Praktikant system engineer allesklar.com AG turmcenter ? am turm 40 d- 53721 siegburg e-mail: lionne.stangier(a)meinestadt.de fax: +49 (0) 2241-9253-66 www.allesklar.com www.meinestadt.de - das portal für alle städte deutschlands www.meinestadt.de/mobil - mobile apps von meinestadt.de www.allesklar.de - deutschlands umfangreichster webkatalog www.datingcafe.de ? die testsieger-singlebörse http://blog.meinestadt.de ? der blog von meinestadt.de allesklar.com AG | siegburg | AG siegburg HRB 7031 vorstand: dr. manfred stegger (vors.), peter bettin vorsitzender des aufsichtsrats: dr. herbert groeger

2 6

Re: Freeradius 2.0.5 simple configuration fail
by ael.gain＠free.fr 06 Jul '11

06 Jul '11

Thank you for your quick answer. I just change to peap in the eap.conf but i still have the same error. Maybe i'll send an email to the maintener of the paquet. I also tried to compile the last version of FreeRadius from sources but i was running into a lot of bugs... ----- Mail Original ----- De: "Alan Buxey" <A.L.M.Buxey(a)lboro.ac.uk> À: "FreeRadius users mailing list" <freeradius-users(a)lists.freeradius.org> Envoyé: Mercredi 6 Juillet 2011 13h22:55 GMT +01:00 Amsterdam / Berlin / Berne / Rome / Stockholm / Vienne Objet: Re: Freeradius 2.0.5 simple configuration fail Hi, > I'm currently trying to set a Freeradius 2.0.5 on a synology NAS which I installed via ipkg. > I would like to authenticate the wifi users throught a netgear WG103 '802.1x enabled'. > So i've just modified the users file to add a 'rad' user : > "rad Cleartext-Password := "rad"" > And added in clients.conf : > client 10.1.1.16 { > secret = ap_pass > shortname = ap > } > I configured the ap according to these settings. > Everything works fine when using radtest, but when trying to authenticate with the ap, i get the debug output that I put in attached file. firstly, 2.0.5 is hideously old - and very very buggy. 2.1.x should be a minimum. can you get your package folk to upgrade their FreeRADIUS package? secondly, change your default eap type in the eap.conf to peap - you seem to have md5 which means a lot of NAK junk - this streamlines EAP. you cant do md5 with wireless. > I suppose the problem comes from : > "auth: No authenticate method (Auth-Type) configuration found for the request: Rejecting the user > auth: Failed to validate the user." from a quick look i'd say things should be okay - make the EAP change and see if the AP plays nicely alan - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

1 0

Freeradius 2.0.5 simple configuration fail
by ael.gain＠free.fr 06 Jul '11

06 Jul '11

Hi everyone, I'm currently trying to set a Freeradius 2.0.5 on a synology NAS which I installed via ipkg. I would like to authenticate the wifi users throught a netgear WG103 '802.1x enabled'. So i've just modified the users file to add a 'rad' user : "rad Cleartext-Password := "rad"" And added in clients.conf : client 10.1.1.16 { secret = ap_pass shortname = ap } I configured the ap according to these settings. Everything works fine when using radtest, but when trying to authenticate with the ap, i get the debug output that I put in attached file. I suppose the problem comes from : "auth: No authenticate method (Auth-Type) configuration found for the request: Rejecting the user auth: Failed to validate the user." I search the Internet a whole day to fix this error without making the radius working... Do you have any idea ? thanks

2 1

Next Pool option
by Antonio Maciá 06 Jul '11

06 Jul '11

Hi! Im running the 2.1.11 version and I would like to know how to configure next-pool options in the ippool file in order to get a ip from a secondary pool when the first pool is starved. Lets say I have two pools, 172.16.1.0/24 and 192.168.10.0/24 and I want that as soon as the 172.16.1.0 range is empty, the Radius start giving addresses form the 192.168.10.0 pool. Is it possible? Thanks in advance.

2 3

FreeRadius 2.1.10 with Oracle support under Fedora 14
by Aurélien Lafranchise 06 Jul '11

06 Jul '11

Hi all, It might be redondant with another but slightly different. I have installed FreeRadius thanks to yum over Fedora 14. Everything went fine and was working fine until I need to add the Oracle support to have the accounting working with on Oracle database. When I needed LDAP support I installed the package freeradius-ldap.x86_64. Unfortunately I can't find the same for Oracle and I don't think it is already installed in the basic package. When I configured sql.conf and activate in site-available/default the accounting sql section I get this error : /etc/raddb/sites-enabled/default[393]: Failed to load module "sql". /etc/raddb/sites-enabled/default[360]: Errors parsing accounting section. Could you help me to find a solution ? Cheers Aurélien

8 27

IIS authentication with FREERADIUS !
by aacable 06 Jul '11

06 Jul '11

Hello All, I am stuck in a situation and need help. I have a ISP type local network, I am using Mikrotik router as PPPOE server and FREERADIUS (ubuntu) as a radius server for about 2000+ users. I Have 5 Terabyte of Media sharing server, (hosted on IIS FTP) , Is there any way that IIS can get authentication from FREERADIUS ? so that only those users can access ftp media sharing server who have account on radius server. Can you please give me some hints on how I can configure IIS to use authentication from FREERADIUS server ? Help plz :) Regards, SYED JAHANZAIB -- View this message in context: http://freeradius.1045715.n5.nabble.com/IIS-authentication-with-FREERADIUS-… Sent from the FreeRadius - User mailing list archive at Nabble.com.

5 6

Log the IP client after a successful login
by joanroldan 06 Jul '11

06 Jul '11

Hi, Is it possible lo to log the IP address of the client after a successfull auth/login? Something like that: Tue Jul 5 17:18:46 2011 : Auth: Login OK: [elopez(a)irta.es/<via Auth-Type = EAP>] (from client WLC_SSCC port 1 cli B8-C7-5D-E4-A3-6B) *$IPADDRESS* Thanks in advance. -- View this message in context: http://freeradius.1045715.n5.nabble.com/Log-the-IP-client-after-a-successfu… Sent from the FreeRadius - User mailing list archive at Nabble.com.

2 1

WISPr-Bandwidth-Max-Down / ChilliSpot-Bandwidth-Max-Down ?
by becoco 05 Jul '11

05 Jul '11

Hello, What is the difference between WISPr-Bandwidth-Max-Down and ChilliSpot-Bandwidth-Max-Down ? Thank you, Mickael

2 1

"use_tunnel_reply" not working in EAP-PEAP (Proxied as plain MSCHAPv2) in eap.conf
by Nitin Bhardwaj 05 Jul '11

05 Jul '11

Hello All, I'm using FreeRADIUS 2.1.11 as a proxy for authenticating PEAP clients with RADIUS server not supporting EAP. All is working well except that when I use "proxy_tunneled_request_as_eap = no" in eap.conf, FreeRADIUS is not passing back all the AVPs sent by RADIUS server in Access-Accept(MSCHAPv2) to the Client, only few ones. But when I set it as "proxy_tunneled_request_as_eap = yes", FreeRADIUS is relaying back all the AVPs received from the RADIUS server properly. eap.conf: ------------ eap { peap { copy_request_to_tunnel = yes use_tunneled_reply = yes proxy_tunneled_request_as_eap = no virtual_server = "proxy-inner-tunnel" } } Hence, in spite of setting "use_tunneled_reply = yes", why isnt FR copying all attributes in Access-Accept back to client ? Is this some bug, fixed in 3.x ? -- Nitin

2 1