- Freeradius-Users - lists.freeradius.org

Segmetation fault: [eap] Passing reply from proxy back into the tunnel
by Simon L. 02 Jun '11

02 Jun '11

Hi, my freeradius works as a proxy, terminates eap and proxy the request with mschap to another freeradius. When "Passing reply from proxy back into the tunnel" the proxy quits with a segmentation fault. This happens, with little difference, when sending the accept or reject back to NAS. EAP/PEAP-MS-CHAPv2 is working when using a local user from users file so that the request is not proxied. My System is Ubuntu 10.4.2 LTS Server and freeradius 2.1.10 from source. I hope anyone got this before and can give a solution. Please have a look in my debug log attached. Thank you very much! Simon FreeRADIUS Version 2.1.10, for host i686-pc-linux-gnu, built on Jun 1 2011 at 14:11:11 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /usr/local/etc/raddb/radiusd.conf including configuration file /usr/local/etc/raddb/proxy.conf including configuration file /usr/local/etc/raddb/clients.conf including files in directory /usr/local/etc/raddb/modules/ including configuration file /usr/local/etc/raddb/modules/attr_filter including configuration file /usr/local/etc/raddb/modules/exec including configuration file /usr/local/etc/raddb/modules/passwd including configuration file /usr/local/etc/raddb/modules/realm including configuration file /usr/local/etc/raddb/modules/linelog including configuration file /usr/local/etc/raddb/modules/cui including configuration file /usr/local/etc/raddb/modules/chap including configuration file /usr/local/etc/raddb/modules/wimax including configuration file /usr/local/etc/raddb/modules/detail including configuration file /usr/local/etc/raddb/modules/sradutmp including configuration file /usr/local/etc/raddb/modules/mac2vlan including configuration file /usr/local/etc/raddb/modules/pam including configuration file /usr/local/etc/raddb/modules/sqlcounter_expire_on_login including configuration file /usr/local/etc/raddb/modules/krb5 including configuration file /usr/local/etc/raddb/modules/ippool including configuration file /usr/local/etc/raddb/modules/logintime including configuration file /usr/local/etc/raddb/modules/detail.example.com including configuration file /usr/local/etc/raddb/modules/dynamic_clients including configuration file /usr/local/etc/raddb/modules/otp including configuration file /usr/local/etc/raddb/modules/expr including configuration file /usr/local/etc/raddb/modules/counter including configuration file /usr/local/etc/raddb/modules/ldap including configuration file /usr/local/etc/raddb/modules/opendirectory including configuration file /usr/local/etc/raddb/modules/preprocess including configuration file /usr/local/etc/raddb/modules/files including configuration file /usr/local/etc/raddb/modules/always including configuration file /usr/local/etc/raddb/modules/unix including configuration file /usr/local/etc/raddb/modules/expiration including configuration file /usr/local/etc/raddb/modules/ntlm_auth including configuration file /usr/local/etc/raddb/modules/smbpasswd including configuration file /usr/local/etc/raddb/modules/detail.log including configuration file /usr/local/etc/raddb/modules/mschap including configuration file /usr/local/etc/raddb/modules/sql_log including configuration file /usr/local/etc/raddb/modules/digest including configuration file /usr/local/etc/raddb/modules/policy including configuration file /usr/local/etc/raddb/modules/mac2ip including configuration file /usr/local/etc/raddb/modules/acct_unique including configuration file /usr/local/etc/raddb/modules/radutmp including configuration file /usr/local/etc/raddb/modules/etc_group including configuration file /usr/local/etc/raddb/modules/echo including configuration file /usr/local/etc/raddb/modules/attr_rewrite including configuration file /usr/local/etc/raddb/modules/smsotp including configuration file /usr/local/etc/raddb/modules/inner-eap including configuration file /usr/local/etc/raddb/modules/pap including configuration file /usr/local/etc/raddb/modules/checkval including configuration file /usr/local/etc/raddb/modules/perl including configuration file /usr/local/etc/raddb/eap.conf including configuration file /usr/local/etc/raddb/policy.conf including files in directory /usr/local/etc/raddb/sites-enabled/ including configuration file /usr/local/etc/raddb/sites-enabled/proxy-inner-tunnel including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel including configuration file /usr/local/etc/raddb/sites-enabled/default including configuration file /usr/local/etc/raddb/sites-enabled/control-socket main { allow_core_dumps = yes } Core dumps are enabled. including dictionary file /usr/local/etc/raddb/dictionary main { prefix = "/usr/local" localstatedir = "/usr/local/var" logdir = "/usr/local/var/log/radius" libdir = "/usr/local/lib" radacctdir = "/usr/local/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/usr/local/var/run/radiusd/radiusd.pid" checkrad = "/usr/local/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 require_message_authenticator = yes zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 irt = 2 mrt = 16 mrc = 5 mrd = 30 } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } realm spot { nostrip authhost = radius.blabla accthost = radius2.blabla secret = testing123 } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } client 10.73.108.0/24 { require_message_authenticator = no secret = "testing123-3" shortname = "Spot" } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating module "exec" from file /usr/local/etc/raddb/modules/exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating module "expr" from file /usr/local/etc/raddb/modules/expr Module: Linked to module rlm_expiration Module: Instantiating module "expiration" from file /usr/local/etc/raddb/modules/expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating module "logintime" from file /usr/local/etc/raddb/modules/logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server proxy-inner-tunnel { # from file /usr/local/etc/raddb/sites-enabled/proxy-inner-tunnel modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_eap Module: Instantiating module "eap" from file /usr/local/etc/raddb/eap.conf eap { default_eap_type = "peap" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 4096 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 CA_path = "/usr/local/etc/raddb/certs" pem_file_type = yes private_key_file = "/usr/local/etc/raddb/certs/server.pem" certificate_file = "/usr/local/etc/raddb/certs/server.pem" CA_file = "/usr/local/etc/raddb/certs/ca.pem" private_key_password = "secret" dh_file = "/usr/local/etc/raddb/certs/dh" random_file = "/usr/local/etc/raddb/certs/random" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/usr/local/etc/raddb/certs/bootstrap" cache { enable = no lifetime = 24 max_entries = 255 } verify { } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = yes use_tunneled_reply = no proxy_tunneled_request_as_eap = no virtual_server = "proxy-inner-tunnel" } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Checking post-proxy {...} for more modules to load } # modules } # server server inner-tunnel { # from file /usr/local/etc/raddb/sites-enabled/inner-tunnel modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating module "pap" from file /usr/local/etc/raddb/modules/pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating module "chap" from file /usr/local/etc/raddb/modules/chap Module: Linked to module rlm_mschap Module: Instantiating module "mschap" from file /usr/local/etc/raddb/modules/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no } Module: Linked to module rlm_unix Module: Instantiating module "unix" from file /usr/local/etc/raddb/modules/unix unix { radwtmp = "/usr/local/var/log/radius/radwtmp" } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating module "suffix" from file /usr/local/etc/raddb/modules/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating module "files" from file /usr/local/etc/raddb/modules/files files { usersfile = "/usr/local/etc/raddb/users" acctusersfile = "/usr/local/etc/raddb/acct_users" preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users" compat = "no" } Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating module "radutmp" from file /usr/local/etc/raddb/modules/radutmp radutmp { filename = "/usr/local/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating module "attr_filter.access_reject" from file /usr/local/etc/raddb/modules/attr_filter attr_filter attr_filter.access_reject { attrsfile = "/usr/local/etc/raddb/attrs.access_reject" key = "%{User-Name}" } } # modules } # server server { # from file /usr/local/etc/raddb/radiusd.conf modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_digest Module: Instantiating module "digest" from file /usr/local/etc/raddb/modules/digest Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating module "preprocess" from file /usr/local/etc/raddb/modules/preprocess preprocess { huntgroups = "/usr/local/etc/raddb/huntgroups" hints = "/usr/local/etc/raddb/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating module "acct_unique" from file /usr/local/etc/raddb/modules/acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating module "detail" from file /usr/local/etc/raddb/modules/detail detail { detailfile = "/usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Instantiating module "attr_filter.accounting_response" from file /usr/local/etc/raddb/modules/attr_filter attr_filter attr_filter.accounting_response { attrsfile = "/usr/local/etc/raddb/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } listen { type = "control" listen { socket = "/usr/local/var/run/radiusd/radiusd.sock" } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on command file /usr/local/var/run/radiusd/radiusd.sock Listening on authentication address 127.0.0.1 port 18120 as server inner-tunnel Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 10.73.108.250 port 2048, id=0, length=127 User-Name = "test" NAS-IP-Address = 10.73.108.250 Called-Station-Id = "022369f4829a" Calling-Station-Id = "001e654bde20" NAS-Identifier = "022369f4829a" NAS-Port = 53 Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x0201000c0174657374696164 Message-Authenticator = 0xa6136247aef9dc5a3dfc1e2cb7997c10 # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "test", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 1 length 12 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] EAP Identity [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 0 to 10.73.108.250 port 2048 EAP-Message = 0x010200061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x872ceda5872ef416fcce132a807fa59a Finished request 0. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.73.108.250 port 2048, id=0, length=254 Cleaning up request 0 ID 0 with timestamp +6 WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0x872ceda5872ef416 did not finish! WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! User-Name = "test" NAS-IP-Address = 10.73.108.250 Called-Station-Id = "022369f4829a" Calling-Station-Id = "001e654bde20" NAS-Identifier = "022369f4829a" NAS-Port = 53 Framed-MTU = 1400 State = 0x872ceda5872ef416fcce132a807fa59a NAS-Port-Type = Wireless-802.11 EAP-Message = 0x0202007919800000006f160301006a0100006603014de639bb9b38461024c267db6347e663e2e14fd28e1023ab230b2f18a49c46da000018002f00350005000ac013c014c009c00a003200380013000401000025ff010001000000000c000a00000774657374696164000a0006000400170018000b00020100 Message-Authenticator = 0x09d281d00ac9508e0108822c7fb30caa # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "test", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 2 length 121 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 111 [peap] Length Included [peap] eaptls_verify returned 11 [peap] (other): before/accept initialization [peap] TLS_accept: before/accept initialization [peap] <<< TLS 1.0 Handshake [length 006a], ClientHello [peap] TLS_accept: SSLv3 read client hello A [peap] >>> TLS 1.0 Handshake [length 0031], ServerHello [peap] TLS_accept: SSLv3 write server hello A [peap] >>> TLS 1.0 Handshake [length 0804], Certificate [peap] TLS_accept: SSLv3 write certificate A [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [peap] TLS_accept: SSLv3 write server done A [peap] TLS_accept: SSLv3 flush data [peap] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 0 to 10.73.108.250 port 2048 EAP-Message = 0x0103040019c00000084816030100310200002d03014de639b9e3c7cf16757a3cce9c7cdc445dda2b3d899fa37ae17b14a8c6e45fbe00002f000005ff0100010016030108040b0008000007fd0003853082038130820269a003020102020102300d06092a864886f70d0101040500308180310b3009060355040613024445310b3009060355040813025348310d300b060355040713044b69656c310f300d060355040a1306544e47204147311d301b06092a864886f70d010901160e746563686e696b40746e672e6465312530230603550403131c544e4720414720436572746966696361746520417574686f72697479301e170d3131303630313132 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x864886f70d01010505003081 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x872ceda5862ff416fcce132a807fa59a Finished request 1. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.73.108.250 port 2048, id=0, length=139 Cleaning up request 1 ID 0 with timestamp +6 WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0x872ceda5862ff416 did not finish! WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! User-Name = "test" NAS-IP-Address = 10.73.108.250 Called-Station-Id = "022369f4829a" Calling-Station-Id = "001e654bde20" NAS-Identifier = "022369f4829a" NAS-Port = 53 Framed-MTU = 1400 State = 0x872ceda5862ff416fcce132a807fa59a NAS-Port-Type = Wireless-802.11 EAP-Message = 0x020300061900 Message-Authenticator = 0xda0bec72f89b8686c85db15af2b44f76 # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "test", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 3 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 0 to 10.73.108.250 port 2048 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0xd3f95b56a50d5669 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x872ceda58528f416fcce132a807fa59a Finished request 2. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.73.108.250 port 2048, id=0, length=139 Cleaning up request 2 ID 0 with timestamp +7 WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0x872ceda58528f416 did not finish! WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! User-Name = "test" NAS-IP-Address = 10.73.108.250 Called-Station-Id = "022369f4829a" Calling-Station-Id = "001e654bde20" NAS-Identifier = "022369f4829a" NAS-Port = 53 Framed-MTU = 1400 State = 0x872ceda58528f416fcce132a807fa59a NAS-Port-Type = Wireless-802.11 EAP-Message = 0x020400061900 Message-Authenticator = 0x68f1caeac9dbb34e879ae67676ca8c97 # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "test", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 4 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 0 to 10.73.108.250 port 2048 EAP-Message = 0x010500621900c1968a67eebfcdeec55b0476cd4c38736f08703b40119f8279fc6e5109780f013bbcf61c0a3499974e1f2b2b197f92b14b348919d48a976735aae2239b3420f3e1c220f1392aed5584a7016fbce4e11663f3f016030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x872ceda58429f416fcce132a807fa59a Finished request 3. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.73.108.250 port 2048, id=0, length=471 Cleaning up request 3 ID 0 with timestamp +7 WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0x872ceda58429f416 did not finish! WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! User-Name = "test" NAS-IP-Address = 10.73.108.250 Called-Station-Id = "022369f4829a" Calling-Station-Id = "001e654bde20" NAS-Identifier = "022369f4829a" NAS-Port = 53 Framed-MTU = 1400 State = 0x872ceda58429f416fcce132a807fa59a NAS-Port-Type = Wireless-802.11 EAP-Message = 0x0205015019800000014616030101061000010201002fd2e04e279bf162c541aeee788f002b65735873489f21acd94660995587435dc0370fbfad1472db799b7303bebf29aca366663f0de56b89e680cecb6f8ad37c35fd58c0d68cce988cce7ca937afca0491956a51f6a8047e78292e99c9a8210af15691b862080636a300817b3ef75011b0ddc867d6e8694092b96deec5899a73677d8f1981b1dd130946d44454d3f507124fafe00d4400e6b46585cba802ac4c5f99d90cac556b77ee30c79a34570b131b2b0b4e6a57cf1fbc33e14c27fa1faf9e1ce2b099f88a32da92b4d1baf49f55dfdcd519b3f60875b1428a99c1bad3a5e9aaa881d69be353 EAP-Message = 0xbf638cf703605cb1f429cc16e4875a43eb7e402dbfc49c2614030100010116030100303dd7dd3b91da8e4a363a82f6debaae5f6705b526009a10487d46babb912ea45fd762cc20b5726d71ad9d327034712200 Message-Authenticator = 0x53c13b1af6b0f2dcb5a2e53bcaceefc9 # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "test", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 5 length 253 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 326 [peap] Length Included [peap] eaptls_verify returned 11 [peap] <<< TLS 1.0 Handshake [length 0106], ClientKeyExchange [peap] TLS_accept: SSLv3 read client key exchange A [peap] <<< TLS 1.0 ChangeCipherSpec [length 0001] [peap] <<< TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 read finished A [peap] >>> TLS 1.0 ChangeCipherSpec [length 0001] [peap] TLS_accept: SSLv3 write change cipher spec A [peap] >>> TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 write finished A [peap] TLS_accept: SSLv3 flush data [peap] (other): SSL negotiation finished successfully SSL Connection Established [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 0 to 10.73.108.250 port 2048 EAP-Message = 0x01060041190014030100010116030100309b393ca57780b79eb43b91305a280b65cd4ba48457e45e2b34e56ca754d6cfb214e09ca153dd0592850bb04e1b108ced Message-Authenticator = 0x00000000000000000000000000000000 State = 0x872ceda5832af416fcce132a807fa59a Finished request 4. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.73.108.250 port 2048, id=0, length=139 Cleaning up request 4 ID 0 with timestamp +7 WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0x872ceda5832af416 did not finish! WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! User-Name = "test" NAS-IP-Address = 10.73.108.250 Called-Station-Id = "022369f4829a" Calling-Station-Id = "001e654bde20" NAS-Identifier = "022369f4829a" NAS-Port = 53 Framed-MTU = 1400 State = 0x872ceda5832af416fcce132a807fa59a NAS-Port-Type = Wireless-802.11 EAP-Message = 0x020600061900 Message-Authenticator = 0x077dbc205e7bcfc6ce2b51f5c0bd33b6 # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "test", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 6 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake is finished [peap] eaptls_verify returned 3 [peap] eaptls_process returned 3 [peap] EAPTLS_SUCCESS [peap] Session established. Decoding tunneled attributes. [peap] Peap state TUNNEL ESTABLISHED ++[eap] returns handled Sending Access-Challenge of id 0 to 10.73.108.250 port 2048 EAP-Message = 0x0107002b190017030100204e0a45adfc896d12ef52ee91ae7e917c4d5a0843b9daf0082763105b76ab1736 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x872ceda5822bf416fcce132a807fa59a Finished request 5. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.73.108.250 port 2048, id=0, length=176 Cleaning up request 5 ID 0 with timestamp +7 WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0x872ceda5822bf416 did not finish! WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! User-Name = "test" NAS-IP-Address = 10.73.108.250 Called-Station-Id = "022369f4829a" Calling-Station-Id = "001e654bde20" NAS-Identifier = "022369f4829a" NAS-Port = 53 Framed-MTU = 1400 State = 0x872ceda5822bf416fcce132a807fa59a NAS-Port-Type = Wireless-802.11 EAP-Message = 0x0207002b1900170301002002411188b62f7f0f621000198a3a5e51af322312f34dea684f00556e91d5320e Message-Authenticator = 0xaaafa27b546fd600c990d7004e13daf1 # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "test", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 7 length 43 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state WAITING FOR INNER IDENTITY [peap] Identity - test [peap] Got inner identity 'test' [peap] Setting default EAP type for tunneled EAP session. [peap] Got tunneled request EAP-Message = 0x0207000c0174657374696164 server { PEAP: Setting User-Name to test Sending tunneled request EAP-Message = 0x0207000c0174657374696164 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "test" NAS-IP-Address = 10.73.108.250 Called-Station-Id = "022369f4829a" Calling-Station-Id = "001e654bde20" NAS-Identifier = "022369f4829a" NAS-Port = 53 Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 server proxy-inner-tunnel { # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/proxy-inner-tunnel +- entering group authorize {...} ++[control] returns notfound } # server proxy-inner-tunnel [peap] Got tunneled reply code 0 PEAP: Calling authenticate in order to initiate tunneled EAP session. # Executing group from file /usr/local/etc/raddb/sites-enabled/proxy-inner-tunnel +- entering group authenticate {...} [eap] EAP Identity [eap] processing type mschapv2 rlm_eap_mschapv2: Issuing Challenge ++[eap] returns handled PEAP: Cancelling proxy to realm spot until the tunneled EAP session has been established [peap] Got tunneled reply RADIUS code 11 EAP-Message = 0x010800211a0108001c10afd44c27c37b79af35d30add84bfef9874657374696164 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x387020c438783a8a5d7d9ae55d393176 [peap] Got tunneled Access-Challenge ++[eap] returns handled Sending Access-Challenge of id 0 to 10.73.108.250 port 2048 EAP-Message = 0x0108004b1900170301004037cceb9590851e01d3aa19f1c45feba5cfa13fb066dd3f58cc0f9d187f5b7e19da62d37bbc2fad7332dba399a98d25c3133ca262b780365bf5ac93687420ef18 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x872ceda58124f416fcce132a807fa59a Finished request 6. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.73.108.250 port 2048, id=0, length=240 Cleaning up request 6 ID 0 with timestamp +7 WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0x872ceda58124f416 did not finish! WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! User-Name = "test" NAS-IP-Address = 10.73.108.250 Called-Station-Id = "022369f4829a" Calling-Station-Id = "001e654bde20" NAS-Identifier = "022369f4829a" NAS-Port = 53 Framed-MTU = 1400 State = 0x872ceda58124f416fcce132a807fa59a NAS-Port-Type = Wireless-802.11 EAP-Message = 0x0208006b190017030100607a6e689c4a295b547d02ac764e369bdfa17c731c1a76bb532b99b82bf7b0920586378032ef2fcba3b91d178da911a71be5bc91d69c3de80fefcc9aa0629517ff15fdabe224a1ed7298c61a5e8408038259c765999b88ca7df972c2cfa0f708f4 Message-Authenticator = 0xe4230d4626e2d4b863a9c04b1303eb07 # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "test", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 8 length 107 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state phase2 [peap] EAP type mschapv2 [peap] Got tunneled request EAP-Message = 0x020800421a0208003d312d2fa39213a4c0a56b970e13741f723500000000000000000e32e5c11d31a3f2315821c2cdfc09c9c5b5833f59459d6c0074657374696164 server { PEAP: Setting User-Name to test Sending tunneled request EAP-Message = 0x020800421a0208003d312d2fa39213a4c0a56b970e13741f723500000000000000000e32e5c11d31a3f2315821c2cdfc09c9c5b5833f59459d6c0074657374696164 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "test" State = 0x387020c438783a8a5d7d9ae55d393176 NAS-IP-Address = 10.73.108.250 Called-Station-Id = "022369f4829a" Calling-Station-Id = "001e654bde20" NAS-Identifier = "022369f4829a" NAS-Port = 53 Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 server proxy-inner-tunnel { # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/proxy-inner-tunnel +- entering group authorize {...} ++[control] returns notfound } # server proxy-inner-tunnel [peap] Got tunneled reply code 0 PEAP: Calling authenticate in order to initiate tunneled EAP session. # Executing group from file /usr/local/etc/raddb/sites-enabled/proxy-inner-tunnel +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/mschapv2 [eap] processing type mschapv2 [eap] Not-EAP proxy set. Not composing EAP ++[eap] returns handled PEAP: Tunneled authentication will be proxied to spot PEAP: Remembering to do EAP-MS-CHAP-V2 post-proxy. [eap] Tunneled session will be proxied. Not doing EAP. ++[eap] returns handled WARNING: Empty pre-proxy section. Using default return values. Sending Access-Request of id 142 to 111.111.111.111 port 1812 User-Name = "test" NAS-IP-Address = 10.73.108.250 Called-Station-Id = "022369f4829a" Calling-Station-Id = "001e654bde20" NAS-Identifier = "022369f4829a" NAS-Port = 53 Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 MS-CHAP-Challenge = 0xafd44c27c37b79af35d30add84bfef98 MS-CHAP2-Response = 0x08652d2fa39213a4c0a56b970e13741f723500000000000000000e32e5c11d31a3f2315821c2cdfc09c9c5b5833f59459d6c Proxy-State = 0x30 Proxying request 7 to home server 111.111.111.111 port 1812 Sending Access-Request of id 142 to 111.111.111.111 port 1812 User-Name = "test" NAS-IP-Address = 10.73.108.250 Called-Station-Id = "022369f4829a" Calling-Station-Id = "001e654bde20" NAS-Identifier = "022369f4829a" NAS-Port = 53 Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 MS-CHAP-Challenge = 0xafd44c27c37b79af35d30add84bfef98 MS-CHAP2-Response = 0x08652d2fa39213a4c0a56b970e13741f723500000000000000000e32e5c11d31a3f2315821c2cdfc09c9c5b5833f59459d6c Proxy-State = 0x30 Going to the next request Waking up in 0.9 seconds. rad_recv: Access-Accept packet from host 111.111.111.111 port 1812, id=142, length=182 MS-CHAP2-Success = 0x08533d36303641433945394338314132343242413137463035344338314632353339364339423531354642 MS-MPPE-Recv-Key = 0x6402c90b25701f12a1f003586fa0067e MS-MPPE-Send-Key = 0x26ceb550531337a9bba59aa8ad27a46d MS-MPPE-Encryption-Policy = 0x00000001 MS-MPPE-Encryption-Types = 0x00000006 Proxy-State = 0x30 # Executing section post-proxy from file /usr/local/etc/raddb/sites-enabled/default +- entering group post-proxy {...} [eap] Doing post-proxy callback [eap] Passing reply from proxy back into the tunnel. server proxy-inner-tunnel { [eap] Passing reply back for EAP-MS-CHAP-V2 # Executing section post-proxy from file /usr/local/etc/raddb/sites-enabled/proxy-inner-tunnel +- entering group post-proxy {...} ++[eap] returns noop WARNING: Empty post-auth section. Using default return values. } # server proxy-inner-tunnel [eap] Final reply from tunneled session code 2 MS-CHAP2-Success = 0x08533d36303641433945394338314132343242413137463035344338314632353339364339423531354642 MS-MPPE-Recv-Key = 0x6402c90b25701f12a1f003586fa0067e MS-MPPE-Send-Key = 0x26ceb550531337a9bba59aa8ad27a46d MS-MPPE-Encryption-Policy = 0x00000001 MS-MPPE-Encryption-Types = 0x00000006 Proxy-State = 0x30 [eap] Got reply 2

4 10

Server Sertificate
by Lubenski, Zeev [GCS] 01 Jun '11

01 Jun '11

We use EAP-TLS method, but in the Server Hello message don't want to send the certificate. How can it be disabled

1 1

Wiki - once upon a time there was documentation
by den2k 01 Jun '11

01 Jun '11

Hi to all, what happened to the contents of the wiki? A lot of stuff is missing, for example http://wiki.freeradius.org/Operators now has nothing more than a few badly explained examples and the table of the operators is missing. Also I couldn't find a lot of stuff that I'm sure there was on the wiki. Also searching stuff is now a pain. Is the old version still accessible in some way? Thanks to all, Denis -- \ __ __ _ * _\ \__\ \ \ _\ \/ \_\ \__ \ \ \__ \\ -------------------------> Registered Linux User # 372295 -----BEGIN GEEK CODE BLOCK----- Version: 3.1 GCS/CM d--- s:+: a-- C+++ UL+++S E--- W+(-) N o+ w--- O? M-- PS+ PE Y+ PGP t+(++) 5? X- R* tv-- b+ DI+ D++++ G+ e h! r++ y* ------END GEEK CODE BLOCK------

6 12

wiki login returning 500
by Phil Mayers 01 Jun '11

01 Jun '11

I'm getting: HTTP Error 500 (Internal Server Error): An unexpected condition was encountered while the server was attempting to fulfil the request. ...when I try to log in using the GitHub referral/login thing; the error is from this URL: http://wiki.freeradius.org/auth/github/callback?code=XXXX

2 1

Offsite linking to the new wiki
by Arran Cudbard-Bell 01 Jun '11

01 Jun '11

Hi All, It's come to our attention that some offsite links were using hardcoded underscores to substitute spaces in wiki URLs. Because gollum uses hyphens (-) as a substitute for whitespace instead of underscores (_), these pages appeared not to exist in the new wiki. I've created a patch (https://github.com/github/gollum/pull/166) to fix this, so that whitespace in filenames becomes a wildcard match for either '-' '_' or ' '. This will also be preserved if the filename changes. However, to stop the gollum people getting too annoyed, new pages created using gollum will not have the wildcard match, as they are created with hypens (-) instead of spaces (even if the page title contains space). So for linking these files, you'll need to either use hyphens (-) or spaces. So in summary: wiki.freeradius.org/exisiting_foo_bar - Works wiki.freeradius.org/exisiting-foo-bar - Works wiki.freeradius.org/exisiting foo bar - Works wiki.freeradius.org/new_foo_bar - Doesn't work wiki.freeradius.org/new-foo-bar - Works wiki.freeradius.org/new foo bar - Works -Arran Arran Cudbard-Bell RM-RF Limited - Security consultation and contracting VoIP: +1 916-436-1352 Cell: +44 7854041841

1 0

FreeRadius with Active DIR - Access by being in a group in active dir
by Eric Lovrien 01 Jun '11

01 Jun '11

I have gotten freeradius up and going and authenicating to Active directory by using the following how to: http://deployingradius.com/documents/configuration/active_directory.html. I am using ntlm_auth to authenicate the users agaist Active Directory. The question i have is, is there a way I can create a group in Active Directory and have only users in that group have access to authenicate? Basically what I am doing or trying to do is use freeradius to authenicate users for wireless access. I don't want every one to have access that is in Active Dir. I would like to create a group called wifi or something similar and put users in that group that are allowed to authnicate. Is this possible using ntlm_auth and if so could some one point me in the direction on getting this set up. Thanks in advance! Eric

2 2

FreeRADIUS wiki changes
by John Center 31 May '11

31 May '11

Hi, The following FreeRADIUS wiki pages have been updated to the new RST format. The content of first 5 pages have been updated to the versions in the v2.1.x branch. http://wiki.freeradius.org/Radiusd.conf http://wiki.freeradius.org/Clients.conf http://wiki.freeradius.org/Proxy.conf http://wiki.freeradius.org/Sites-configuration http://wiki.freeradius.org/Virtual-server http://wiki.freeradius.org/Modules2 The format of some of the pages could use some additional work, but at least they are readable. HTH -John -- John Center Villanova University

1 0

I would like help for Freeradius integration on AD domain
by edgardolenza 31 May '11

31 May '11

Hello everybody, I apologize because I'm new with linux and freeradius also. I've readen many forums and many howtos but I've got some trouble with user authentication on domain controller. This is my working layout: -I've got an appliance (radius client) getting authentication requests from users. -the client radius sends authentication requests to the freeradius (using CHAP) -freeradius has to ask to AD if the user can be authenticated I've configured many things and I've done many tests: freeradius server seems working correctly. The machine is in Microsoft domain, I'm able to make queries on ADs. When I try to authenticate with domain's I've got problems: I've put the debug on bottom of this message. Thank you very much, Eddy. RADIUSD DEBUG: [root@RADIUS-APN ~]# radiusd -X FreeRADIUS Version 2.1.10, for host i386-redhat-linux-gnu, built on Oct 19 2010 at 19:44:13 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/modules/ including configuration file /etc/raddb/modules/sradutmp including configuration file /etc/raddb/modules/cui including configuration file /etc/raddb/modules/passwd including configuration file /etc/raddb/modules/files including configuration file /etc/raddb/modules/smbpasswd including configuration file /etc/raddb/modules/pap including configuration file /etc/raddb/modules/logintime including configuration file /etc/raddb/modules/counter including configuration file /etc/raddb/modules/checkval including configuration file /etc/raddb/modules/ldap including configuration file /etc/raddb/modules/inner-eap including configuration file /etc/raddb/modules/acct_unique including configuration file /etc/raddb/modules/realm including configuration file /etc/raddb/modules/echo including configuration file /etc/raddb/modules/unix including configuration file /etc/raddb/modules/mac2ip including configuration file /etc/raddb/modules/opendirectory including configuration file /etc/raddb/modules/sql_log including configuration file /etc/raddb/modules/preprocess including configuration file /etc/raddb/modules/always including configuration file /etc/raddb/modules/smsotp including configuration file /etc/raddb/modules/attr_rewrite including configuration file /etc/raddb/modules/perl including configuration file /etc/raddb/modules/otp including configuration file /etc/raddb/modules/ippool including configuration file /etc/raddb/modules/ntlm_auth including configuration file /etc/raddb/modules/dynamic_clients including configuration file /etc/raddb/modules/exec including configuration file /etc/raddb/modules/policy including configuration file /etc/raddb/modules/expr including configuration file /etc/raddb/modules/expiration including configuration file /etc/raddb/modules/wimax including configuration file /etc/raddb/modules/chap including configuration file /etc/raddb/modules/radutmp including configuration file /etc/raddb/modules/detail including configuration file /etc/raddb/modules/pam including configuration file /etc/raddb/modules/digest including configuration file /etc/raddb/modules/mac2vlan including configuration file /etc/raddb/modules/sqlcounter_expire_on_login including configuration file /etc/raddb/modules/mschap including configuration file /etc/raddb/modules/attr_filter including configuration file /etc/raddb/modules/detail.log including configuration file /etc/raddb/modules/linelog including configuration file /etc/raddb/modules/etc_group including configuration file /etc/raddb/modules/detail.example.com including configuration file /etc/raddb/eap.conf including configuration file /etc/raddb/policy.conf including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/control-socket including configuration file /etc/raddb/sites-enabled/inner-tunnel main { user = "radiusd" group = "radiusd" allow_core_dumps = no } including dictionary file /etc/raddb/dictionary main { prefix = "/usr" localstatedir = "/var" logdir = "/var/log/radius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = no log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 require_message_authenticator = yes zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 irt = 2 mrt = 16 mrc = 5 mrd = 30 } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm ulssve.lan { auth_pool = my_auth_failover WARNING: Ignoring old-style configuration entry "authhost" in realm "ulssve.lan" } realm LOCAL { } realm NULL { } realm DEFAULT { nostrip authhost = ulssve.lan accthost = ulssve.lan secret = AtlantiD3 } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } client 172.30.100.1 { require_message_authenticator = no secret = "AtlantiD3" shortname = "TLCAPN1" nastype = "other" } client 172.30.100.2 { require_message_authenticator = no secret = "AtlantiD3" shortname = "TLCAPN2" nastype = "other" } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating module "exec" from file /etc/raddb/modules/exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating module "expr" from file /etc/raddb/modules/expr Module: Linked to module rlm_expiration Module: Instantiating module "expiration" from file /etc/raddb/modules/expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating module "logintime" from file /etc/raddb/modules/logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating module "pap" from file /etc/raddb/modules/pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating module "chap" from file /etc/raddb/modules/chap Module: Linked to module rlm_mschap Module: Instantiating module "mschap" from file /etc/raddb/modules/mschap mschap { use_mppe = yes require_encryption = yes require_strong = yes with_ntdomain_hack = yes ntlm_auth = "/user/bin/ntlm_auth --request-nt-key --username=radiustest" } Module: Linked to module rlm_unix Module: Instantiating module "unix" from file /etc/raddb/modules/unix unix { radwtmp = "/var/log/radius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating module "eap" from file /etc/raddb/eap.conf eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 4096 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 CA_path = "/etc/raddb/certs" pem_file_type = yes private_key_file = "/etc/raddb/certs/server.pem" certificate_file = "/etc/raddb/certs/server.pem" CA_file = "/etc/raddb/certs/ca.pem" private_key_password = "whatever" dh_file = "/etc/raddb/certs/dh" random_file = "/dev/urandom" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" cache { enable = no lifetime = 24 max_entries = 255 } verify { } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating module "suffix" from file /etc/raddb/modules/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating module "files" from file /etc/raddb/modules/files files { usersfile = "/etc/raddb/users" acctusersfile = "/etc/raddb/acct_users" preproxy_usersfile = "/etc/raddb/preproxy_users" compat = "no" } Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating module "radutmp" from file /etc/raddb/modules/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating module "attr_filter.access_reject" from file /etc/raddb/modules/attr_filter attr_filter attr_filter.access_reject { attrsfile = "/etc/raddb/attrs.access_reject" key = "%{User-Name}" } } # modules } # server server { # from file /etc/raddb/radiusd.conf modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_digest Module: Instantiating module "digest" from file /etc/raddb/modules/digest Module: Linked to module rlm_ldap Module: Instantiating module "ldap" from file /etc/raddb/modules/ldap ldap { server = "ldap.your.domain" port = 389 password = "" identity = "" net_timeout = 1 timeout = 4 timelimit = 3 tls_mode = no start_tls = no tls_require_cert = "allow" tls { start_tls = no require_cert = "allow" } basedn = "o=My Org,c=UA" filter = "(uid=%{%{Stripped-User-Name}:-%{User-Name}})" base_filter = "(objectclass=radiusprofile)" auto_header = no access_attr_used_for_allow = yes groupname_attribute = "cn" groupmembership_filter = "(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))" dictionary_mapping = "/etc/raddb/ldap.attrmap" ldap_debug = 0 ldap_connections_number = 5 compare_check_items = no do_xlat = yes set_auth_type = yes } rlm_ldap: Registering ldap_groupcmp for Ldap-Group rlm_ldap: Registering ldap_xlat with xlat_name ldap rlm_ldap: reading ldap<->radius mappings from file /etc/raddb/ldap.attrmap rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password rlm_ldap: LDAP sambaLmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP sambaNtPassword mapped to RADIUS NT-Password rlm_ldap: LDAP dBCSPwd mapped to RADIUS LM-Password rlm_ldap: LDAP userPassword mapped to RADIUS Password-With-Header rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network rlm_ldap: LDAP radiusClass mapped to RADIUS Class rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS Framed-AppleTalk-Network rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message rlm_ldap: LDAP radiusTunnelType mapped to RADIUS Tunnel-Type rlm_ldap: LDAP radiusTunnelMediumType mapped to RADIUS Tunnel-Medium-Type rlm_ldap: LDAP radiusTunnelPrivateGroupId mapped to RADIUS Tunnel-Private-Group-Id conns: 0x9bf8a58 Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating module "preprocess" from file /etc/raddb/modules/preprocess preprocess { huntgroups = "/etc/raddb/huntgroups" hints = "/etc/raddb/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Instantiating module "IPASS" from file /etc/raddb/modules/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating module "acct_unique" from file /etc/raddb/modules/acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating module "detail" from file /etc/raddb/modules/detail detail { detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Instantiating module "attr_filter.accounting_response" from file /etc/raddb/modules/attr_filter attr_filter attr_filter.accounting_response { attrsfile = "/etc/raddb/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = 10.1.0.230 port = 0 } listen { type = "acct" ipaddr = 10.1.0.230 port = 1813 } listen { type = "control" listen { socket = "/var/run/radiusd/radiusd.sock" } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on authentication interface eth0 address 10.1.0.230 port 1812 Listening on accounting interface eth0 address 10.1.0.230 port 1813 Listening on command file /var/run/radiusd/radiusd.sock Listening on authentication address 127.0.0.1 port 18120 as server inner-tunnel Ready to process requests. #by eddy: trying authenticating: ulssve/radiustest with CHAP encryption rad_recv: Access-Request packet from host 172.30.100.2 port 61124, id=59, length=153 User-Name = "ulssve/radiustest" CHAP-Challenge = 0xa57a0606a57a0606a57a0606a57a0606 CHAP-Password = 0x004b8dc7cf70b24916b3a07b5c3707aa84 NAS-IP-Address = 172.30.100.2 NAS-Identifier = "GGSN-RM5" Called-Station-Id = "ulss12ve.tim.it" Framed-Protocol = GPRS-PDP-Context Service-Type = Framed-User NAS-Port-Type = Virtual Calling-Station-Id = "393666140176" 3GPP-PDP-Type = 0 # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok [chap] Setting 'Auth-Type := CHAP' ++[chap] returns ok ++[mschap] returns noop ++[digest] returns noop [IPASS] Looking up realm "ulssve" for User-Name = "ulssve/radiustest" [IPASS] Found realm "DEFAULT" [IPASS] Adding Realm = "DEFAULT" [IPASS] Proxying request from user radiustest to realm DEFAULT [IPASS] Preparing to proxy authentication request to realm "DEFAULT" ++[IPASS] returns updated [suffix] Request already proxied. Ignoring. ++[suffix] returns ok [eap] No EAP-Message, not doing EAP ++[eap] returns noop ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop There was no response configured: rejecting request 0 Using Post-Auth-Type Reject # Executing group from file /etc/raddb/sites-enabled/default +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> ulssve/radiustest attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 0 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 0 Sending Access-Reject of id 59 to 172.30.100.2 port 61124 Waking up in 4.9 seconds. Cleaning up request 0 ID 59 with timestamp +41 Ready to process requests. #by eddy: trying authenticating: ulssve.lan/radiustest with CHAP encryption rad_recv: Access-Request packet from host 172.30.100.2 port 61124, id=169, length=157 User-Name = "ulssve.lan/radiustest" CHAP-Challenge = 0xdac50606dac50606dac50606dac50606 CHAP-Password = 0x00b709e7205a4414ceb310eea4e80d1245 NAS-IP-Address = 172.30.100.2 NAS-Identifier = "GGSN-RM5" Called-Station-Id = "ulss12ve.tim.it" Framed-Protocol = GPRS-PDP-Context Service-Type = Framed-User NAS-Port-Type = Virtual Calling-Station-Id = "393666140176" 3GPP-PDP-Type = 0 # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok [chap] Setting 'Auth-Type := CHAP' ++[chap] returns ok ++[mschap] returns noop ++[digest] returns noop [IPASS] Looking up realm "ulssve.lan" for User-Name = "ulssve.lan/radiustest" [IPASS] Found realm "ulssve.lan" [IPASS] Adding Stripped-User-Name = "radiustest" [IPASS] Adding Realm = "ulssve.lan" [IPASS] Proxying request from user radiustest to realm ulssve.lan [IPASS] Preparing to proxy authentication request to realm "ulssve.lan" ++[IPASS] returns updated [suffix] Request already proxied. Ignoring. ++[suffix] returns ok [eap] No EAP-Message, not doing EAP ++[eap] returns noop ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop There was no response configured: rejecting request 1 Using Post-Auth-Type Reject # Executing group from file /etc/raddb/sites-enabled/default +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> ulssve.lan/radiustest attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 1 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 1 Sending Access-Reject of id 169 to 172.30.100.2 port 61124 Waking up in 4.9 seconds. Cleaning up request 1 ID 169 with timestamp +60 Ready to process requests. #by eddy: trying authenticating: ulssve.lan@radiustest with CHAP encryption rad_recv: Access-Request packet from host 172.30.100.2 port 60020, id=72, length=157 User-Name = "ulssve.lan@radiustest" CHAP-Challenge = 0x16310707163107071631070716310707 CHAP-Password = 0x00abf7223d9848db75fdfc23148143eb27 NAS-IP-Address = 172.30.100.2 NAS-Identifier = "GGSN-RM5" Called-Station-Id = "ulss12ve.tim.it" Framed-Protocol = GPRS-PDP-Context Service-Type = Framed-User NAS-Port-Type = Virtual Calling-Station-Id = "393666140176" 3GPP-PDP-Type = 0 # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok [chap] Setting 'Auth-Type := CHAP' ++[chap] returns ok ++[mschap] returns noop ++[digest] returns noop [IPASS] No '/' in User-Name = "ulssve.lan@radiustest", looking up realm NULL [IPASS] Found realm "NULL" [IPASS] Adding Stripped-User-Name = "ulssve.lan@radiustest" [IPASS] Adding Realm = "NULL" [IPASS] Authentication realm is LOCAL. ++[IPASS] returns ok [suffix] Request already proxied. Ignoring. ++[suffix] returns ok [eap] No EAP-Message, not doing EAP ++[eap] returns noop ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = CHAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group CHAP {...} [chap] login attempt by "ulssve.lan@radiustest" with CHAP password [chap] Cleartext-Password is required for authentication ++[chap] returns invalid Failed to authenticate the user. Using Post-Auth-Type Reject # Executing group from file /etc/raddb/sites-enabled/default +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> ulssve.lan@radiustest attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 2 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 2 Sending Access-Reject of id 72 to 172.30.100.2 port 60020 Waking up in 4.9 seconds. Cleaning up request 2 ID 72 with timestamp +87 Ready to process requests. #by eddy: trying authenticating: radiustest(a)ulssve.lan with CHAP encryption rad_recv: Access-Request packet from host 172.30.100.2 port 54247, id=15, length=157 User-Name = "radiustest(a)ulssve.lan" CHAP-Challenge = 0xd4ab0707d4ab0707d4ab0707d4ab0707 CHAP-Password = 0x0057dc83b55c66b3ae5f6442d8c52f2d89 NAS-IP-Address = 172.30.100.2 NAS-Identifier = "GGSN-RM5" Called-Station-Id = "ulss12ve.tim.it" Framed-Protocol = GPRS-PDP-Context Service-Type = Framed-User NAS-Port-Type = Virtual Calling-Station-Id = "393666140176" 3GPP-PDP-Type = 0 # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok [chap] Setting 'Auth-Type := CHAP' ++[chap] returns ok ++[mschap] returns noop ++[digest] returns noop [IPASS] No '/' in User-Name = "radiustest(a)ulssve.lan", looking up realm NULL [IPASS] Found realm "NULL" [IPASS] Adding Stripped-User-Name = "radiustest(a)ulssve.lan" [IPASS] Adding Realm = "NULL" [IPASS] Authentication realm is LOCAL. ++[IPASS] returns ok [suffix] Request already proxied. Ignoring. ++[suffix] returns ok [eap] No EAP-Message, not doing EAP ++[eap] returns noop ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = CHAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group CHAP {...} [chap] login attempt by "radiustest(a)ulssve.lan" with CHAP password [chap] Cleartext-Password is required for authentication ++[chap] returns invalid Failed to authenticate the user. Using Post-Auth-Type Reject # Executing group from file /etc/raddb/sites-enabled/default +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> radiustest(a)ulssve.lan attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 3 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 3 Sending Access-Reject of id 15 to 172.30.100.2 port 54247 Waking up in 4.9 seconds. Cleaning up request 3 ID 15 with timestamp +119 Ready to process requests. -- View this message in context: http://freeradius.1045715.n5.nabble.com/I-would-like-help-for-Freeradius-in… Sent from the FreeRadius - User mailing list archive at Nabble.com.

3 4

Repeating the same attribute in reply message
by Shai Mizrachi 31 May '11

31 May '11

Hi, I am using FreeRadius 2.1.7-7.el5 on CentOS 5.6. The RPM package is the one came with the CentOS system. I a trying to send in the Access-Accept the same attribute twice but with different values (for Wimax QoS descriptor). I am using the += operator but still, the reply message contains only the first parameter and the second is just ignored. I would appriciate some help.... The attributes are: WiMAX-QoS-Id += 1, WiMAX-Schedule-Type += Best-Effort, WiMAX-Traffic-Priority += 1, WiMAX-Maximum-Sustained-Traffic-Rate += 2000000, WiMAX-QoS-Id += 2, WiMAX-Schedule-Type += Best-Effort, WiMAX-Traffic-Priority += 1, WiMAX-Maximum-Sustained-Traffic-Rate += 2000000, but I get only (from the Radius -X): WiMAX-QoS-Id = 1 WiMAX-Schedule-Type = Best-Effort WiMAX-Traffic-Priority = 1 WiMAX-Maximum-Sustained-Traffic-Rate = 2000000 Many Thanks, Shai.

2 5

Invitation to connect on LinkedIn
by rasito rasito via LinkedIn 31 May '11

31 May '11

LinkedIn ------------ rasito rasito requested to add you as a connection on LinkedIn: ------------------------------------------ Glen, I'd like to add you to my professional network on LinkedIn. - rasito Accept invitation from rasito rasito http://www.linkedin.com/e/f5ihn8-goc97kqm-6v/ABSVWpZ1_sZ_yf9BG_W25ECMqsoijR… View invitation from rasito rasito http://www.linkedin.com/e/f5ihn8-goc97kqm-6v/ABSVWpZ1_sZ_yf9BG_W25ECMqsoijR… ------------------------------------------ DID YOU KNOW you can conduct a more credible and powerful reference check using LinkedIn? Enter the company name and years of employment or the prospective employee to find their colleagues that are also in your network. This provides you with a more balanced set of feedback to evaluate that new hire. http://www.linkedin.com/e/f5ihn8-goc97kqm-6v/rsr/inv-27/ -- (c) 2011, LinkedIn Corporation

1 0