- Freeradius-Users - lists.freeradius.org

Invitation to connect on LinkedIn
by Hafiz Pussah via LinkedIn 30 May '11

30 May '11

LinkedIn ------------ Hafiz Pussah requested to add you as a connection on LinkedIn: ------------------------------------------ Glen, I'd like to add you to my professional network on LinkedIn. - Hafiz Accept invitation from Hafiz Pussah http://www.linkedin.com/e/f5ihn8-gobqmngo-4v/ABSVWpZ1_sZ_yf9BG_W25ECMqsoijR… View invitation from Hafiz Pussah http://www.linkedin.com/e/f5ihn8-gobqmngo-4v/ABSVWpZ1_sZ_yf9BG_W25ECMqsoijR… ------------------------------------------ DID YOU KNOW you can conduct a more credible and powerful reference check using LinkedIn? Enter the company name and years of employment or the prospective employee to find their colleagues that are also in your network. This provides you with a more balanced set of feedback to evaluate that new hire. http://www.linkedin.com/e/f5ihn8-gobqmngo-4v/rsr/inv-27/ -- (c) 2011, LinkedIn Corporation

1 0

Authenticating AP.
by Mrinal K 30 May '11

30 May '11

Hello Everyone, I was trying to configure freeradius to authenticate users coming from multiple APs and authenticate them on the basis of the AP the request is coming from(e.g. if user A's request is sent by AP X then accept; if user A's request comes from AP Y then reject; if user B's request comes from AP Y then accept). One scheme for this to be achieved could be that client.conf has entry for each AP individually and APs IP address and shared secret is used to identify the AP; however the scenario I am considering has APs behind the NATed gateways rendering this method useless. But if I configure clients.conf over MAC-address instead of IP-address and use Called-Station-ID with shared secret to identify AP then I think it should work out. I am not sure how feasible will this be. I went through the old posts in the forum but could not find anything specific, to point in this direction. I would be extremely thankful if anyone could direct me in right direction. Thanks in advance. Regards, Kumar Mrinal -- -

1 1

Add more information to Logfile?
by thomas.dohl＠24-7-it-services.de 30 May '11

30 May '11

Hello Everyone, in my client config I use netmaskranges. f.e: ... ipaddr = 172.16.0.0 netmask = 12 shortname = swr01 ... Now I only see the following information: Sun May 29 01:52:44 2011 : Auth: Invalid user: [...] (from client swr01 port 417 cli 00-..-..-..-..-..) It is possible to see the real client IP and the user IP in the log? Thanks in advance. Kind regards, Thomas Dohl

3 4

First Time Go at Setting Up FreeRadius with Active Directory - Authentication Issues - Any help pointing me in the right direction would be greatly appreciated.
by eric＠mixeduperic.com 28 May '11

28 May '11

DC: 192.168.1.4 or Server11 Wireless Access Point: 192.168.1.251 SSID: jump I have hit a brickwall and am having a really hard time getting through this last stretch. This is my first time trying to setup freeradius and still trying to wrap my head around a couple of things. I am trying to setup freeradius on Centos 5.6 and am running into some issues. I am looking to setup freeradius to authenticate users for wireless access using there active directory account. I have tried following both these two guides: http://www.perkinsblog.net/blog/index.php/2010/02/freeradius-and-windows-ad/ http://deployingradius.com/documents/configuration/active_directory.html . I can authenticate just find using some of the tools and local commands to test however When I start freeradius and try and connect using wireless I get some errors. Below are the errors I am seeing when running freeradius in debug mode (radiusd -X): [CODE]Ready to process requests. rad_recv: Access-Request packet from host 192.168.1.251 port 65468, id=72, length=150 User-Name = "TEC\\user1" NAS-IP-Address = 192.168.1.251 NAS-Port = 0 Called-Station-Id = "F8-1E-DF-FE-C7-1C:jump" Calling-Station-Id = "00-1E-C2-A6-25-E7" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11" EAP-Message = 0x0202000c015445435c65626c Message-Authenticator = 0x63beaad45c9e4c48aa05cc09025a390d +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "TEC\user1", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 2 length 12 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound rlm_ldap: Entering ldap_groupcmp() [files] expand: �??cn=users,dc=TEC,dc=local�?? -> �??cn=users,dc=TEC,dc=local�?? [files] WARNING: Deprecated conditional expansion ":-". See "man unlang" for details [files] expand: �??(&(sAMAccountName=%{Stripped-User-Name:-%{User-Name}}))�?? -> �??(&(sAMAccountName=TEC\5cuser1))�?? rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: attempting LDAP reconnection rlm_ldap: (re)connect to server11.tec.local:389, authentication 0 rlm_ldap: bind as �??cn=Administrator,cn=users,dc=TEC,dc=local�??/MY-ADMIN-PASSWORD to server11.tec.local:389 rlm_ldap: waiting for bind result ... rlm_ldap: LDAP login failed: check identity, password settings in ldap section of radiusd.conf rlm_ldap: (re)connection attempt failed rlm_ldap::ldap_groupcmp: search failed rlm_ldap: ldap_release_conn: Release Id: 0 ++[files] returns noop [ldap] performing user authorization for TEC\user1 [ldap] WARNING: Deprecated conditional expansion ":-". See "man unlang" for details [ldap] expand: �??(&(sAMAccountName=%{Stripped-User-Name:-%{User-Name}}))�?? -> �??(&(sAMAccountName=TEC\5cuser1))�?? [ldap] expand: �??cn=users,dc=TEC,dc=local�?? -> �??cn=users,dc=TEC,dc=local�?? rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: attempting LDAP reconnection rlm_ldap: (re)connect to server11.tec.local:389, authentication 0 rlm_ldap: bind as �??cn=Administrator,cn=users,dc=TEC,dc=local�??/MY-ADMIN-PASSWORD to server11.tec.local:389 rlm_ldap: waiting for bind result ... rlm_ldap: LDAP login failed: check identity, password settings in ldap section of radiusd.conf rlm_ldap: (re)connection attempt failed [ldap] search failed rlm_ldap: ldap_release_conn: Release Id: 0 ++[ldap] returns fail Invalid user: [TEC\\user1/<via Auth-Type = EAP>] (from client 192.168.1.251 port 0 cli 00-1E-C2-A6-25-E7) Using Post-Auth-Type Reject +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> TEC\user1 attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 1 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 1 Sending Access-Reject of id 72 to 192.168.1.251 port 65468 Waking up in 4.9 seconds. Cleaning up request 1 ID 72 with timestamp +112 Ready to process requests. [/CODE] ------------------------------------------------------------------------------ This is what it looks like when I start freeradius in debug mode: [CODE][root@server15 raddb]# radiusd -X FreeRADIUS Version 2.1.7, for host x86_64-redhat-linux-gnu, built on Mar 31 2010 at 00:14:28 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/modules/ including configuration file /etc/raddb/modules/krb5 including configuration file /etc/raddb/modules/always including configuration file /etc/raddb/modules/files including configuration file /etc/raddb/modules/pap including configuration file /etc/raddb/modules/linelog including configuration file /etc/raddb/modules/unix including configuration file /etc/raddb/modules/digest including configuration file /etc/raddb/modules/expr including configuration file /etc/raddb/modules/attr_rewrite including configuration file /etc/raddb/modules/acct_unique including configuration file /etc/raddb/modules/preprocess including configuration file /etc/raddb/modules/passwd including configuration file /etc/raddb/modules/detail.example.com including configuration file /etc/raddb/modules/mac2vlan including configuration file /etc/raddb/modules/sradutmp including configuration file /etc/raddb/modules/exec including configuration file /etc/raddb/modules/realm including configuration file /etc/raddb/modules/attr_filter including configuration file /etc/raddb/modules/ippool including configuration file /etc/raddb/modules/perl including configuration file /etc/raddb/modules/mac2ip including configuration file /etc/raddb/modules/policy including configuration file /etc/raddb/modules/detail.log including configuration file /etc/raddb/modules/etc_group including configuration file /etc/raddb/modules/logintime including configuration file /etc/raddb/modules/mschap including configuration file /etc/raddb/modules/inner-eap including configuration file /etc/raddb/modules/checkval including configuration file /etc/raddb/modules/expiration including configuration file /etc/raddb/modules/cui including configuration file /etc/raddb/modules/smbpasswd including configuration file /etc/raddb/modules/radutmp including configuration file /etc/raddb/modules/wimax including configuration file /etc/raddb/modules/echo including configuration file /etc/raddb/modules/ldap including configuration file /etc/raddb/modules/smsotp including configuration file /etc/raddb/modules/ntlm_auth including configuration file /etc/raddb/modules/sqlcounter_expire_on_login including configuration file /etc/raddb/modules/counter including configuration file /etc/raddb/modules/detail including configuration file /etc/raddb/modules/sql_log including configuration file /etc/raddb/modules/otp including configuration file /etc/raddb/modules/chap including configuration file /etc/raddb/modules/pam including configuration file /etc/raddb/eap.conf including configuration file /etc/raddb/policy.conf including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/control-socket including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/inner-tunnel group = radiusd user = radiusd including dictionary file /etc/raddb/dictionary main { prefix = "/usr" localstatedir = "/var" logdir = "/var/log/radius" libdir = "/usr/lib64/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 allow_core_dumps = no pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = yes auth_badpass = yes auth_goodpass = yes } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 require_message_authenticator = no zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 irt = 2 mrt = 16 mrc = 5 mrd = 30 } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "My-SECRET!" nastype = "other" } client 192.168.1.251 { require_message_authenticator = no secret = "My-SECRET!" shortname = "192.168.1.251" } client 192.168.1.0/24 { require_message_authenticator = no secret = "My-SECRET!" shortname = "TEC" } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating expr Module: Linked to module rlm_expiration Module: Instantiating expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server inner-tunnel { modules { Module: Checking authenticate {...} for more modules to load Module: Instantiating ntlm_auth exec ntlm_auth { wait = yes program = "/usr/bin/ntlm_auth --request-nt-key --domain=TEC --username=%{mschap:User-Name} --password=%{User-Password}" input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_pap Module: Instantiating pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating chap Module: Linked to module rlm_mschap Module: Instantiating mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --username=%{mschap:User-Name:-None} --domain=%{%{mschap:NT-Domain}:-MYDOMAIN} --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}" } Module: Linked to module rlm_unix Module: Instantiating unix unix { radwtmp = "/var/log/radius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 2048 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 pem_file_type = yes private_key_file = "/etc/raddb/certs/server.pem" certificate_file = "/etc/raddb/certs/server.pem" CA_file = "/etc/raddb/certs/ca.pem" private_key_password = "whatever" dh_file = "/etc/raddb/certs/dh" random_file = "/etc/raddb/certs/random" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/etc/raddb/certs/bootstrap" cache { enable = no lifetime = 24 max_entries = 255 } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating suffix realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating files files { usersfile = "/etc/raddb/users" acctusersfile = "/etc/raddb/acct_users" preproxy_usersfile = "/etc/raddb/preproxy_users" compat = "no" } Module: Linked to module rlm_ldap Module: Instantiating ldap ldap { server = "server11.tec.local" port = 389 password = "MY-ADMIN-PASSWORD" identity = "�??cn=Administrator,cn=users,dc=TEC,dc=local�??" net_timeout = 1 timeout = 4 timelimit = 3 tls_mode = no start_tls = no tls_require_cert = "allow" tls { start_tls = no require_cert = "allow" } basedn = "�??cn=users,dc=TEC,dc=local�??" filter = "�??(&(sAMAccountName=%{Stripped-User-Name:-%{User-Name}}))�??" base_filter = "(objectclass=radiusprofile)" auto_header = no access_attr_used_for_allow = yes groupname_attribute = "cn" groupmembership_filter = "�??(|(&(objectClass=group)(member=%Ldap-UserDn}))(&(objectClass=top)(uniquemember=%{Ldap-UserDn})))�??" dictionary_mapping = "/etc/raddb/ldap.attrmap" ldap_debug = 0 ldap_connections_number = 5 compare_check_items = no do_xlat = yes set_auth_type = yes } rlm_ldap: Registering ldap_groupcmp for Ldap-Group rlm_ldap: Registering ldap_xlat with xlat_name ldap rlm_ldap: Over-riding set_auth_type, as there is no module ldap listed in the "authenticate" section. rlm_ldap: reading ldap<->radius mappings from file /etc/raddb/ldap.attrmap rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password rlm_ldap: LDAP sambaLmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP sambaNtPassword mapped to RADIUS NT-Password rlm_ldap: LDAP dBCSPwd mapped to RADIUS LM-Password rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network rlm_ldap: LDAP radiusClass mapped to RADIUS Class rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS Framed-AppleTalk-Network rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message rlm_ldap: LDAP radiusTunnelType mapped to RADIUS Tunnel-Type rlm_ldap: LDAP radiusTunnelMediumType mapped to RADIUS Tunnel-Medium-Type rlm_ldap: LDAP radiusTunnelPrivateGroupId mapped to RADIUS Tunnel-Private-Group-Id conns: 0x12432850 Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating attr_filter.access_reject attr_filter attr_filter.access_reject { attrsfile = "/etc/raddb/attrs.access_reject" key = "%{User-Name}" } } # modules } # server server { modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating preprocess preprocess { huntgroups = "/etc/raddb/huntgroups" hints = "/etc/raddb/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating detail detail { detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Instantiating attr_filter.accounting_response attr_filter attr_filter.accounting_response { attrsfile = "/etc/raddb/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } listen { type = "control" listen { socket = "/var/run/radiusd/radiusd.sock" } } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on command file /var/run/radiusd/radiusd.sock Listening on proxy address * port 1814 Ready to process requests.[/CODE] ----------------------------------------------------------------------- If any one can help point me in the right direction, I would appreciate it so much!

4 3

Re: Different Auth Methods based on client entries with ntlm_auth
by Alan DeKok 28 May '11

28 May '11

O'Neil, Donald A. wrote: > I've followed the instructions on > http://deployingradius.com/documents/configuration/active_directory.html and > it works great for one group when I add the option > --require-membership-of=SomeGroup but I need a way to figure out how to > specify that group name, perhaps based on the nastype, or some other > variable I can set in the client configuration. Put the group name into a temporary variable (Tmp-String-0), and then edit the ntlm_auth line in raddb/modules/mschap: ntlm_auth = ".... --require-membership-of=%{Tmp-String-0}" That will be dynamically expanded at run time. Alan DeKok.

2 2

Freeradius Secret
by Nathan McDavit-Van Fleet 28 May '11

28 May '11

Can somebody tell me the expected issues when the secret for a Client is misconfigured? We had an issue with some NAS' not able to connect to the Freeradius, and it appears as if the only we changed was the corresponding secrets. Are NAS' with mis-matched secrets dropped silently or logged? Nathan Van Fleet

3 2

accounting RADIUS module PAM
by Igor Pinotti 27 May '11

27 May '11

Hello! I'm using the Linux-PAM (1.1.3) with the RADIUS module (1.3.17) in an embeddded system, running linux. I'm trying to set the RADIUS accounting on it, enabling the accounting commands. But I can't find where I can do this, even in the src code of the Radius module, the function that supposed to do this is kinda empty... Could someone help me? I'm using the freeRADIUS in my pc as a server to authenticate the embedded.... Thank you all in advance -- Igor Kramer Pinotti

2 3

Freeradius + xmpp server
by Sergio Belkin 27 May '11

27 May '11

Hi, I'd want to know if anyone there is using freeradius along with a xmpp server. I'd like to read experiences about it. Thanks in advance! -- -- Sergio Belkin http://www.sergiobelkin.com Watch More TV http://sebelk.blogspot.com LPIC-2 Certified - http://www.lpi.org

3 7

(no subject)
by Lubenski, Zeev [GCS] 27 May '11

27 May '11

We do have a question Is there anything in configuration that allows to turn off authentication We are running EAP-TTLS and would like instead of sending challenge on Access send Access accept always. (No authentication in fact)

5 15

New FreeRADIUS wiki - Help appreciated!
by Arran Cudbard-Bell 27 May '11

27 May '11

Dear Users, One of the largest complains with FreeRADIUS is the lack of comprehensive documentation. The current wiki @ wiki.freeradius.org has served its purpose, but has ultimately failed to provide an update to date, well organised source of documentation. The current major problems with the wiki are: * spam users - which meant we had to lock registration, and discouraged new users from contributing * exporting information - all pages are stored in an sql lite instance, which makes it hard to automatically roll pages into releases * formatting information - Information stored in the wiki is in the Media wiki format, whereas the documentation bundled with FreeRADIUS is either unformatted or in rst format. To try and solve these issues and glue everything together a bit more, i've been working with Alan DeKok to set up a new instance of Gollum. Gollum is a ruby on rails application which exposes a git repository as wiki site. Gollum can render files in many markup languages including plaintext, RST and Mediawiki format, which means we can import all current server documentation, all current wiki documentation and have them neatly presented in a single wiki site. Neat huh? But what about spam and registration? Well by default gollum doesn't authenticate anyone. But because it's a rails application we can drop in a library called 'OmniAuth' which uses Oauth to authenticate a bunch of providers. This allows us to leverage authentication and spam account prevention services of providers like GitHub, Facebook and Twitter. Unfortunately the new wiki isn't ready from primetime. The mediawiki page format renderer in gollum isn't perfect, so we need to convert those pages to RST as a priority. If you want to help out, please do the following: 1) Sign up for Facebook, Twitter or GitHub 2) Go to http://power.freeradius.org:4567 3) Pick a page where the MediaWiki format doesn't render correctly 4) Edit it 5) Change edit mode from MediaWiki to reStructuredText 6) Convert markup to RST (see here: http://docutils.sourceforge.net/docs/ref/rst/restructuredtext.html) 7) Save the page 8) Get warm fuzzy glow from contributing to open source Also please report any bugs here: https://github.com/github/gollum/issues?_pjax=true&state=open Many Thanks, Arran Arran Cudbard-Bell RM-RF Limited - Security consultation and contracting VoIP: +1 916-436-1352 Cell: +44 7854041841

6 21