- Freeradius-Users - lists.freeradius.org

Login access-request results to syslog
by Angel L. Mateo 24 May '11

24 May '11

Hello, I'm trying to configure my freeradius server (version 2.1.8 running in a ubuntu 10.04 server) to log access request results to syslog. My configuration is: authorize { ... sistemas_syslog ... } accounting { ... sistemas_syslog ... } post-auth { ... sistemas_syslog Post-Auth-Type REJECT { ... sistemas_syslog } Post-Auth-Type ACCEPT { ... sistemas_syslog } } And I also have: linelog sistemas_syslog { filename = syslog format = "This is a Application log message for %{User-Name} (%{Packet-Type})" reference = "%{%{Packet-Type}:-format}" Access-Request = "Application Requested access: %{User-Name}" Access-Reject = "Application Rejected access: %{User-Name}" Access-Challenge = "Application Sent challenge: %{User-Name}" Access-Accept = "Application Accepted access: %{User-Name}" } But all logs I have are: May 23 12:44:33 vulpes21 freeradius: Application Requested access: XXXXXXXXXXXX May 23 12:44:33 vulpes21 freeradius: Application Requested access: XXXXXXXXXXXX (yes, it is sent twice). In debug mode I get: rad_recv: Access-Request packet from host 155.54.67.15 port 52081, id=1, length=71 Calling-Station-Id = "XXXXXXXXXXXXXXXXXx" User-Name = "XXXXXXXXXXXXXXXXXXXX" User-Password = "XXXXXXXXXXXXX" Service-Type = Login-User server sistemas { +- entering group authorize {...} [sistemas_log] expand: /var/log/freeradius/radacct/%{Client-IP-Address}/sistemas_log-%Y%m%d -> /var/log/freeradius/radacct/155.54.67.15/sistemas_log-20110523 [sistemas_log] /var/log/freeradius/radacct/%{Client-IP-Address}/sistemas_log-%Y%m%d expands to /var/log/freeradius/radacct/155.54.67.15/sistemas_log-20110523 [sistemas_log] expand: %t -> Mon May 23 12:44:33 2011 ++[sistemas_log] returns ok [sistemas_syslog] expand: %{Packet-Type} -> Access-Request [sistemas_syslog] expand: %{%{Packet-Type}:-format} -> Access-Request [sistemas_syslog] expand: Application Requested access: %{User-Name} -> Application Requested access: XXXXXXXXXXXX ++[sistemas_syslog] returns ok [suffix] Looking up realm "um.es" for User-Name = "XXXXXXXXXXXX" [suffix] Found realm "um.es" [suffix] Adding Stripped-User-Name = "amateo" [suffix] Adding Realm = "um.es" [suffix] Authentication realm is LOCAL. ++[suffix] returns ok [files_sistemas] users: Matched entry DEFAULT at line 15 [files_sistemas] expand: %{User-Name} -> XXXXXXXXXXXX ++[files_sistemas] returns ok [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = LDAP +- entering group LDAP {...} [ldap-email] login attempt by "amateo" with password "XXXXXXXXXXXXXX" <The rest of LDAP debug messages> ++[ldap-email] returns ok Login OK: [XXXXXXXXXXXX] (from client monitor port 0 cli PORTALREDES) +- entering group post-auth {...} [sistemas_log] expand: /var/log/freeradius/radacct/%{Client-IP-Address}/sistemas_log-%Y%m%d -> /var/log/freeradius/radacct/155.54.67.15/sistemas_log-20110523 [sistemas_log] /var/log/freeradius/radacct/%{Client-IP-Address}/sistemas_log-%Y%m%d expands to /var/log/freeradius/radacct/155.54.67.15/sistemas_log-20110523 [sistemas_log] expand: %t -> Mon May 23 12:44:33 2011 ++[sistemas_log] returns ok [sistemas_syslog] expand: %{Packet-Type} -> Access-Request [sistemas_syslog] expand: %{%{Packet-Type}:-format} -> Access-Request [sistemas_syslog] expand: Application Requested access: %{User-Name} -> Application Requested access: XXXXXXXXXXXX ++[sistemas_syslog] returns ok } # server sistemas Sending Access-Accept of id 1 to 155.54.67.15 port 52081 User-Name = "XXXXXXXXXXXX" Finished request 0. Going to the next request Waking up in 4.9 seconds. All I want is to log in syslog if the access-request is accepted or rejected for any reason. Any help? -- Angel L. Mateo Martínez Sección de Telemática Área de Tecnologías de la Información _o) y las Comunicaciones Aplicadas (ATICA) / \\ http://www.um.es/atica _(___V Tfo: 868887590 Fax: 868888337

2 2

How to change "++[files] returns noop " into "++[files] returns reject"
by thomas.dohl＠24-7-it-services.de 24 May '11

24 May '11

Hi all, in the section "authorize" I include the module "file". (/etc/raddb/users) At the moment I get an noop if a user is not found in the file. How can I change it to return a reject, if a user is not found? Now: ++[files] returns noop Destination: ++[files] returns reject Thanks in advance, Thomas

3 4

Re: Authentication Problem
by john decot 24 May '11

24 May '11

________________________________ From: Fajar A. Nugraha <list(a)fajar.net> To: FreeRadius users mailing list <freeradius-users(a)lists.freeradius.org> Sent: Tue, May 24, 2011 8:15:42 AM Subject: Re: Authentication Problem On Tue, May 24, 2011 at 9:20 AM, john decot <johndecot(a)yahoo.com> wrote: > Hi , > I have been using freeradius-server-2.1.10 . Dialupadmin is using for web > based administration. It was working fine till yesterday. I have changed > added attribute to check Max-All-Session. Then I have face problem of > No authenticate method (Auth-Type) found for the request: Rejecting the > user Max-All-Session alone should not cause that > > however the authorized section is working fine. After googling i have check > with option default Auth-Type = Local but it was not success. Normally you should never have to mess with Auth-Type, unless you're doing some exotic setup (like LDAP bind with fallback to system user) > this error > occurs for new create user only , old user are authenticating normally. > > I have revert back my changes with removing attribute to check > Max-All-Session but still the error exists. ... which again, simply confirms that Max-All-Session was not the cause of the problem > > Please advise me. You have changed something else and made it broken. Reverse that. I use git to record changes in /etc/raddb so I can have a record of what have changed. You might need something similar. In the mean time, see http://wiki.freeradius.org/index.php/FAQ#It_still_doesn.27t_work.21 Since you say only some users experience it, compare the log for both the working and non-working user. -- Fajar - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

1 0

DHCP+radius
by Umut Arus 23 May '11

23 May '11

Hi, I would like to MAC filtering on a DHCP system with LDAP. I think, radius may work as a DHCP server. There are some methods as radius proxy or some experimental ways. What is the best way to do MAC filtering? What is your suggestion? thanks,

1 0

Can't add a $ sign to the ldap search
by Alexandros Gougousoudis 23 May '11

23 May '11

Hi, I tried to change the ldap-searchfilter in the ldap module, to search for a username "user" and "user$" in LDAP, if "user" is given. This is neccecary to authenticate my workstations and users via LDAP. This is my filter definition in the ldap module: filter = "(|(uid=%{%{Stripped-User-Name}:-%{User-Name}})(uid=%{%{Stripped-User-Name}:-%{User-Name}}\$))" This ist what I get: [ldap] expand: (|(uid=%{%{Stripped-User-Name}:-%{User-Name}})(uid=%{%{Stripped-User-Name}:-%{User-Name}}$)) -> (|(uid=scit-beerchen)(uid=scit-beerchen)) [ldap] expand: dc=verwaltung,dc=kh-berlin,dc=de -> dc=verwaltung,dc=kh-berlin,dc=de [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] attempting LDAP reconnection [ldap] (re)connect to physalis:389, authentication 0 [ldap] bind as / to physalis:389 [ldap] waiting for bind result ... [ldap] Bind was successful [ldap] performing search in dc=verwaltung,dc=kh-berlin,dc=de, with filter (|(uid=scit-beerchen)(uid=scit-beerchen)) [ldap] object not found But the "$" sign is always ignored. I tried also \\$ and some other combinations. But none worked. So I'am doing it the wrong way. How do I add (or escape) the $ into my query? BTW: The query (|(uid=scit-beerchen)(uid=scit-beerchen$)) works on the shell with ldapsearch. the ldap module itself works also. What's the problem? TIA Alex

1 0

AD Authentication + radius + foundryAP
by Mark Pipkin 20 May '11

20 May '11

I followed the guide that was linked from http://wiki.freeradius.org/FreeRADIUS_Active_Directory_Integration_HOWTO because I'm running v2 of the radius server. After going to the guide I was still unable to authenticate to the AD though the wireless AP controller. This radius is running on Ubuntu 10.04 and is supposed to replace a free radius controller running v1 on Gentoo. The one running on Gentoo is working for the most part, just dies from time to time. So we are just upgrading and refreshing. For some reason I have not been able to get the radius server to do what I need it to do and that is work with MS-CHAP so that it will authenticate to AD. FreeRADIUS Version 2.1.8, for host i486-pc-linux-gnu, built on Jan 5 2010 at 02:49:11 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /etc/freeradius/radiusd.conf including configuration file /etc/freeradius/proxy.conf including configuration file /etc/freeradius/clients.conf including files in directory /etc/freeradius/modules/ including configuration file /etc/freeradius/modules/cui including configuration file /etc/freeradius/modules/detail.log including configuration file /etc/freeradius/modules/mac2ip including configuration file /etc/freeradius/modules/attr_rewrite including configuration file /etc/freeradius/modules/sqlcounter_expire_on_login including configuration file /etc/freeradius/modules/perl including configuration file /etc/freeradius/modules/smbpasswd including configuration file /etc/freeradius/modules/inner-eap including configuration file /etc/freeradius/modules/counter including configuration file /etc/freeradius/modules/echo including configuration file /etc/freeradius/modules/exec including configuration file /etc/freeradius/modules/acct_unique including configuration file /etc/freeradius/modules/radutmp including configuration file /etc/freeradius/modules/chap including configuration file /etc/freeradius/modules/wimax including configuration file /etc/freeradius/modules/sradutmp including configuration file /etc/freeradius/modules/attr_filter including configuration file /etc/freeradius/modules/ntlm_auth including configuration file /etc/freeradius/modules/detail.example.com including configuration file /etc/freeradius/modules/krb5 including configuration file /etc/freeradius/modules/detail including configuration file /etc/freeradius/modules/expiration including configuration file /etc/freeradius/modules/unix including configuration file /etc/freeradius/modules/logintime including configuration file /etc/freeradius/modules/linelog including configuration file /etc/freeradius/modules/sql_log including configuration file /etc/freeradius/modules/ldap including configuration file /etc/freeradius/modules/expr including configuration file /etc/freeradius/modules/pam including configuration file /etc/freeradius/modules/policy including configuration file /etc/freeradius/modules/files including configuration file /etc/freeradius/modules/realm including configuration file /etc/freeradius/modules/otp including configuration file /etc/freeradius/modules/smsotp including configuration file /etc/freeradius/modules/digest including configuration file /etc/freeradius/modules/mschap including configuration file /etc/freeradius/modules/etc_group including configuration file /etc/freeradius/modules/pap including configuration file /etc/freeradius/modules/mac2vlan including configuration file /etc/freeradius/modules/passwd including configuration file /etc/freeradius/modules/ippool including configuration file /etc/freeradius/modules/always including configuration file /etc/freeradius/modules/preprocess including configuration file /etc/freeradius/modules/checkval including configuration file /etc/freeradius/eap.conf including configuration file /etc/freeradius/policy.conf including files in directory /etc/freeradius/sites-enabled/ including configuration file /etc/freeradius/sites-enabled/inner-tunnel including configuration file /etc/freeradius/sites-enabled/default main { user = "freerad" group = "freerad" allow_core_dumps = no } including dictionary file /etc/freeradius/dictionary main { prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/var/run/rad2/rad2.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 require_message_authenticator = no zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 irt = 2 mrt = 16 mrc = 5 mrd = 30 } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } client foundryap { ipaddr = 192.168.103.10 require_message_authenticator = no secret = "testing123" } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating expr Module: Linked to module rlm_expiration Module: Instantiating expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server inner-tunnel { modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating chap Module: Linked to module rlm_mschap Module: Instantiating mschap mschap { use_mppe = yes require_encryption = yes require_strong = yes with_ntdomain_hack = yes ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --username=%{mschap:User-Name:-None} --domain=%{%{mschap:NT-Domain}:-ATL.EXAMPLE.COM} --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00} --require-membership-of=ATL+wifi-secure" } Module: Linked to module rlm_eap Module: Instantiating eap eap { default_eap_type = "peap" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 4096 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 pem_file_type = yes private_key_file = "/etc/freeradius/certs/server.key" certificate_file = "/etc/freeradius/certs/server.pem" CA_file = "/etc/freeradius/certs/ca.pem" private_key_password = "whatever" dh_file = "/etc/freeradius/certs/dh" random_file = "/etc/freeradius/certs/random" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/etc/freeradius/certs/bootstrap" cache { enable = no lifetime = 24 max_entries = 255 } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = yes use_tunneled_reply = yes proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating preprocess preprocess { huntgroups = "/etc/freeradius/huntgroups" hints = "/etc/freeradius/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Linked to module rlm_realm Module: Instantiating suffix realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = yes } Module: Instantiating ntdomain realm ntdomain { format = "prefix" delimiter = "\" ignore_default = no ignore_null = yes } Module: Linked to module rlm_files Module: Instantiating files files { usersfile = "/etc/freeradius/users" acctusersfile = "/etc/freeradius/acct_users" preproxy_usersfile = "/etc/freeradius/preproxy_users" compat = "no" } Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating attr_filter.access_reject attr_filter attr_filter.access_reject { attrsfile = "/etc/freeradius/attrs.access_reject" key = "%{User-Name}" } } # modules } # server server { modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pam Module: Instantiating pam pam { pam_auth = "radiusd" } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating auth_log detail auth_log { detailfile = "/var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Instantiating detail detail { detailfile = "/var/log/freeradius/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Linked to module rlm_unix Module: Instantiating unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Module: Instantiating attr_filter.accounting_response attr_filter attr_filter.accounting_response { attrsfile = "/etc/freeradius/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 1812 } listen { type = "acct" ipaddr = * port = 1813 } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 192.168.103.10 port 32890, id=83, length=158 User-Name = "ATL\\user" NAS-IP-Address = 192.168.103.10 NAS-Port = 6145 Called-Station-Id = "00-90-0B-0A-81-96:radtest" Calling-Station-Id = "00-26-C7-6F-FF-64" Framed-MTU = 900 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 802.11g" EAP-Message = 0x020100110141544c5c7069706b696e5f6d Message-Authenticator = 0xf18704d104d0322078509df754b74003 +- entering group authorize {...} ++[preprocess] returns ok [auth_log] expand: /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /var/log/freeradius/radacct/192.168.103.10/auth-detail-20110516 [auth_log] /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/192.168.103.10/auth-detail-20110516 [auth_log] expand: %t -> Mon May 16 15:28:41 2011 ++[auth_log] returns ok ++[chap] returns noop ++[mschap] returns noop [ntdomain] Looking up realm "ATL" for User-Name = "ATL\user" [ntdomain] No such realm "ATL" ++[ntdomain] returns noop [eap] EAP packet type response id 1 length 17 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] EAP Identity [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 83 to 192.168.103.10 port 32890 EAP-Message = 0x010200061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x880bd1788809c8ca896d5b23fad51f0e Finished request 0. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.103.10 port 32890, id=84, length=296 User-Name = "ATL\\user" NAS-IP-Address = 192.168.103.10 NAS-Port = 6145 Called-Station-Id = "00-90-0B-0A-81-96:radtest" Calling-Station-Id = "00-26-C7-6F-FF-64" Framed-MTU = 900 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 802.11g" EAP-Message = 0x0202008919800000007f160301007a0100007603014dd17b10f62607c3d64b96e5d9505d0180e01cb5bd8d86d43136a93b0805404a209e83189d67298bccdaa3ebde678430bac0f21f8fc6ae3786aa1efaadf9822f110018002f00350005000ac013c014c009c00a003200380013000401000015ff01000100000a0006000400170018000b00020100 State = 0x880bd1788809c8ca896d5b23fad51f0e Message-Authenticator = 0x013e8d6954e859caabbe5767cb033984 +- entering group authorize {...} ++[preprocess] returns ok [auth_log] expand: /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /var/log/freeradius/radacct/192.168.103.10/auth-detail-20110516 [auth_log] /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/192.168.103.10/auth-detail-20110516 [auth_log] expand: %t -> Mon May 16 15:28:41 2011 ++[auth_log] returns ok ++[chap] returns noop ++[mschap] returns noop [ntdomain] Looking up realm "ATL" for User-Name = "ATL\user" [ntdomain] No such realm "ATL" ++[ntdomain] returns noop [eap] EAP packet type response id 2 length 137 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 127 [peap] Length Included [peap] eaptls_verify returned 11 [peap] (other): before/accept initialization [peap] TLS_accept: before/accept initialization [peap] <<< TLS 1.0 Handshake [length 007a], ClientHello [peap] TLS_accept: SSLv3 read client hello A [peap] >>> TLS 1.0 Handshake [length 0031], ServerHello [peap] TLS_accept: SSLv3 write server hello A [peap] >>> TLS 1.0 Handshake [length 01c3], Certificate [peap] TLS_accept: SSLv3 write certificate A [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [peap] TLS_accept: SSLv3 write server done A [peap] TLS_accept: SSLv3 flush data [peap] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 84 to 192.168.103.10 port 32890 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x3336e1804d16833ff8b416030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x880bd1788908c8ca896d5b23fad51f0e Finished request 1. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.103.10 port 32890, id=85, length=165 User-Name = "ATL\\user" NAS-IP-Address = 192.168.103.10 NAS-Port = 6145 Called-Station-Id = "00-90-0B-0A-81-96:radtest" Calling-Station-Id = "00-26-C7-6F-FF-64" Framed-MTU = 900 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 802.11g" EAP-Message = 0x020300061900 State = 0x880bd1788908c8ca896d5b23fad51f0e Message-Authenticator = 0xada9d2724210731e12da1c6d2f3f0926 +- entering group authorize {...} ++[preprocess] returns ok [auth_log] expand: /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /var/log/freeradius/radacct/192.168.103.10/auth-detail-20110516 [auth_log] /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/192.168.103.10/auth-detail-20110516 [auth_log] expand: %t -> Mon May 16 15:28:41 2011 ++[auth_log] returns ok ++[chap] returns noop ++[mschap] returns noop [ntdomain] Looking up realm "ATL" for User-Name = "ATL\user" [ntdomain] No such realm "ATL" ++[ntdomain] returns noop [eap] EAP packet type response id 3 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 85 to 192.168.103.10 port 32890 EAP-Message = 0x010400061900 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x880bd1788a0fc8ca896d5b23fad51f0e Finished request 2. Going to the next request Waking up in 4.9 seconds. Invalid packet code 4 sent to authentication port from client foundryap port 32770 : IGNORED Waking up in 4.3 seconds. Invalid packet code 4 sent to authentication port from client foundryap port 32770 : IGNORED Waking up in 3.8 seconds. Invalid packet code 4 sent to authentication port from client foundryap port 32770 : IGNORED Waking up in 3.6 seconds. rad_recv: Access-Request packet from host 192.168.103.10 port 32890, id=88, length=158 User-Name = "ATL\\user" NAS-IP-Address = 192.168.103.10 NAS-Port = 6145 Called-Station-Id = "00-90-0B-0A-81-96:radtest" Calling-Station-Id = "00-26-C7-6F-FF-64" Framed-MTU = 900 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 802.11g" EAP-Message = 0x020100110141544c5c7069706b696e5f6d Message-Authenticator = 0x26e0f9d13ab7787bf244db77d342326d +- entering group authorize {...} ++[preprocess] returns ok [auth_log] expand: /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /var/log/freeradius/radacct/192.168.103.10/auth-detail-20110516 [auth_log] /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/192.168.103.10/auth-detail-20110516 [auth_log] expand: %t -> Mon May 16 15:28:43 2011 ++[auth_log] returns ok ++[chap] returns noop ++[mschap] returns noop [ntdomain] Looking up realm "ATL" for User-Name = "ATL\user" [ntdomain] No such realm "ATL" ++[ntdomain] returns noop [eap] EAP packet type response id 1 length 17 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] EAP Identity [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 88 to 192.168.103.10 port 32890 EAP-Message = 0x010200061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x457c467c457e5f9ed7afaf432a46c660 Finished request 3. Going to the next request Waking up in 3.6 seconds. rad_recv: Access-Request packet from host 192.168.103.10 port 32890, id=89, length=165 User-Name = "ATL\\user" NAS-IP-Address = 192.168.103.10 NAS-Port = 6145 Called-Station-Id = "00-90-0B-0A-81-96:radtest" Calling-Station-Id = "00-26-C7-6F-FF-64" Framed-MTU = 900 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 802.11g" EAP-Message = 0x020200060311 State = 0x457c467c457e5f9ed7afaf432a46c660 Message-Authenticator = 0xad2eebc61c93e9f242fc51bf2dafe2c0 +- entering group authorize {...} ++[preprocess] returns ok [auth_log] expand: /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /var/log/freeradius/radacct/192.168.103.10/auth-detail-20110516 [auth_log] /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/192.168.103.10/auth-detail-20110516 [auth_log] expand: %t -> Mon May 16 15:28:43 2011 ++[auth_log] returns ok ++[chap] returns noop ++[mschap] returns noop [ntdomain] Looking up realm "ATL" for User-Name = "ATL\user" [ntdomain] No such realm "ATL" ++[ntdomain] returns noop [eap] EAP packet type response id 2 length 6 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP NAK [eap] EAP-NAK asked for EAP-Type/leap [eap] processing type leap rlm_eap_leap: Stage 2 rlm_eap_leap: Issuing AP Challenge rlm_eap_leap: Successfully initiated ++[eap] returns handled Sending Access-Challenge of id 89 to 192.168.103.10 port 32890 EAP-Message = 0x0103001c11010008765dcad2513ca14941544c5c7069706b696e5f6d Message-Authenticator = 0x00000000000000000000000000000000 State = 0x457c467c447f579ed7afaf432a46c660 Finished request 4. Going to the next request Waking up in 3.6 seconds. rad_recv: Access-Request packet from host 192.168.103.10 port 32890, id=90, length=203 User-Name = "ATL\\user" NAS-IP-Address = 192.168.103.10 NAS-Port = 6145 Called-Station-Id = "00-90-0B-0A-81-96:radtest" Calling-Station-Id = "00-26-C7-6F-FF-64" Framed-MTU = 900 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 802.11g" EAP-Message = 0x0203002c1101001887b03ee7af25d8731fec4765958f0f4b0775fd12760ca7a341544c5c7069706b696e5f6d State = 0x457c467c447f579ed7afaf432a46c660 Message-Authenticator = 0xcc373dbaa966a554c5a5a842877f7fed +- entering group authorize {...} ++[preprocess] returns ok [auth_log] expand: /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /var/log/freeradius/radacct/192.168.103.10/auth-detail-20110516 [auth_log] /var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/192.168.103.10/auth-detail-20110516 [auth_log] expand: %t -> Mon May 16 15:28:43 2011 ++[auth_log] returns ok ++[chap] returns noop ++[mschap] returns noop [ntdomain] Looking up realm "ATL" for User-Name = "ATL\user" [ntdomain] No such realm "ATL" ++[ntdomain] returns noop [eap] EAP packet type response id 3 length 44 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/leap [eap] processing type leap rlm_eap_leap: No Cleartext-Password or NT-Password configured for this user [eap] Handler failed in EAP/leap [eap] Failed in EAP select ++[eap] returns invalid Failed to authenticate the user. Using Post-Auth-Type Reject +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> ATL\user attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 5 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 5 Sending Access-Reject of id 90 to 192.168.103.10 port 32890 EAP-Message = 0x04030004 Message-Authenticator = 0x00000000000000000000000000000000 Flame on! Seriously though.. I'm going to keep working at this, just didn't know if someone would be able to help me out. Thanks. Mark PIpkin Systems Administrator Air2Web Office: +1 404 942 5365 E-mail: mark.pipkin(a)air2web.com Mobilize your business. Find out how at www.air2web.com Follow us on Twitter @a2wmobile This message contains privileged and confidential information. If received in error, please delete immediately.

3 8

Active directory groups
by Doty, Seth 20 May '11

20 May '11

I have looked on the list for this a few times but there doesn't appear to be a "how to", just an "it might work". We are wanting to use freeradius with our wireless controller for .1x termination. It will need to authenticate to AD and based on the returned group hand back different attributes to the wireless controller. I don't have any way to do a static group request because the options are rather large here. AD needs to pass it back and then i can probably do a match in the freeradius users file and pass the controller an attribute (I think). We are using PEAP/MSCHAPv2 for this currently. We were going to just proxy this to a microsoft NPS but it appears that that option hands back attributes in the "wrong" place and overall just seems terrible. So far I have the ldap component querying AD correctly and I have the ntlm_auth component doing the same and each individually passing from a radtest. My question now revolves around passing the groups in our setup and if this is even possible using the protocols listed above. Unfortunately, we don't have the option to move away from these protocols in our environment. I'm a bit of a freeradius noob so any help is appreciated.

4 9

/etc/raddb/radiusd.conf[249]: Error binding to port for :: port 1812
by Dougan, Linda A 20 May '11

20 May '11

I just upgraded to net-dialup/freeradius-2.1.7 on a gentoo linux server. I have already checked to see if there is anything listening on port 1812 including freeradius and there is nothing on that port. Any help would be greatly appreciated. This is my radiusd-X output. FreeRADIUS Version 2.1.7, for host i686-pc-linux-gnu, built on May 12 2011 at 10:43:07 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/modules/ including configuration file /etc/raddb/modules/cui including configuration file /etc/raddb/modules/pam including configuration file /etc/raddb/modules/pap including configuration file /etc/raddb/modules/otp including configuration file /etc/raddb/modules/chap including configuration file /etc/raddb/modules/echo including configuration file /etc/raddb/modules/exec including configuration file /etc/raddb/modules/expr including configuration file /etc/raddb/modules/ldap including configuration file /etc/raddb/modules/krb5 including configuration file /etc/raddb/modules/perl including configuration file /etc/raddb/modules/unix including configuration file /etc/raddb/modules/inner-eap including configuration file /etc/raddb/modules/radutmp including configuration file /etc/raddb/modules/counter including configuration file /etc/raddb/modules/acct_unique including configuration file /etc/raddb/modules/files including configuration file /etc/raddb/modules/realm including configuration file /etc/raddb/modules/wimax including configuration file /etc/raddb/modules/mac2vlan including configuration file /etc/raddb/modules/linelog including configuration file /etc/raddb/modules/sqlcounter_expire_on_login including configuration file /etc/raddb/modules/detail.example.com including configuration file /etc/raddb/modules/checkval including configuration file /etc/raddb/modules/logintime including configuration file /etc/raddb/modules/sql_log including configuration file /etc/raddb/modules/sradutmp including configuration file /etc/raddb/modules/always including configuration file /etc/raddb/modules/attr_rewrite including configuration file /etc/raddb/modules/krb5 including configuration file /etc/raddb/modules/perl including configuration file /etc/raddb/modules/unix including configuration file /etc/raddb/modules/inner-eap including configuration file /etc/raddb/modules/radutmp including configuration file /etc/raddb/modules/counter including configuration file /etc/raddb/modules/acct_unique including configuration file /etc/raddb/modules/files including configuration file /etc/raddb/modules/realm including configuration file /etc/raddb/modules/wimax including configuration file /etc/raddb/modules/mac2vlan including configuration file /etc/raddb/modules/linelog including configuration file /etc/raddb/modules/sqlcounter_expire_on_login including configuration file /etc/raddb/modules/detail.example.com including configuration file /etc/raddb/modules/checkval including configuration file /etc/raddb/modules/logintime including configuration file /etc/raddb/modules/sql_log including configuration file /etc/raddb/modules/sradutmp including configuration file /etc/raddb/modules/always including configuration file /etc/raddb/modules/attr_rewrite including configuration file /etc/raddb/modules/detail including configuration file /etc/raddb/modules/digest including configuration file /etc/raddb/modules/ippool including configuration file /etc/raddb/modules/mac2ip including configuration file /etc/raddb/modules/mschap including configuration file /etc/raddb/modules/smbpasswd including configuration file /etc/raddb/modules/passwd including configuration file /etc/raddb/modules/policy including configuration file /etc/raddb/modules/smsotp including configuration file /etc/raddb/modules/etc_group including configuration file /etc/raddb/modules/preprocess including configuration file /etc/raddb/modules/attr_filter including configuration file /etc/raddb/modules/detail.log including configuration file /etc/raddb/modules/expiration including configuration file /etc/raddb/eap.conf including configuration file /etc/raddb/sql.conf including configuration file /etc/raddb/policy.conf including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/inner-tunnel including configuration file /etc/raddb/sites-enabled/control-socket group = radiusd user = radiusd including dictionary file /etc/raddb/dictionary main { prefix = "/usr" localstatedir = "/var" logdir = "/var/log/radius" libdir = "/usr/lib/freeradius/" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 allow_core_dumps = no pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = no } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = yes dead_time = 120 wake_all_if_all_dead = no } realm sfcd.net { authhost = LOCAL accthost = LOCAL } radiusd: #### Loading Clients #### client 127.0.0.1 { require_message_authenticator = no secret = "test" shortname = "localhost" nastype = "other" } client 209.252.140.58/30 { require_message_authenticator = no radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating expr Module: Linked to module rlm_expiration Module: Instantiating expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server inner-tunnel { modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating chap Module: Linked to module rlm_mschap Module: Instantiating mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no } Module: Linked to module rlm_unix Module: Instantiating unix unix { radwtmp = "/var/log/radius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 2048 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 pem_file_type = yes private_key_file = "/etc/raddb/certs/server.pem" certificate_file = "/etc/raddb/certs/server.pem" CA_file = "/etc/raddb/certs/ca.pem" private_key_password = "whatever" dh_file = "/etc/raddb/certs/dh" random_file = "/etc/raddb/certs/random" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/etc/raddb/certs/bootstrap" cache { enable = no lifetime = 24 max_entries = 255 } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } } Module: Linked to module rlm_unix Module: Instantiating unix unix { radwtmp = "/var/log/radius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 2048 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 pem_file_type = yes private_key_file = "/etc/raddb/certs/server.pem" certificate_file = "/etc/raddb/certs/server.pem" CA_file = "/etc/raddb/certs/ca.pem" private_key_password = "whatever" dh_file = "/etc/raddb/certs/dh" random_file = "/etc/raddb/certs/random" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/etc/raddb/certs/bootstrap" cache { enable = no lifetime = 24 max_entries = 255 } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating suffix realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating files files { usersfile = "/etc/raddb/users" acctusersfile = "/etc/raddb/acct_users" preproxy_usersfile = "/etc/raddb/preproxy_users" compat = "no" } Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating attr_filter.access_reject attr_filter attr_filter.access_reject { attrsfile = "/etc/raddb/attrs.access_reject" key = "%{User-Name}" } } # modules } # server server { modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating preprocess preprocess { huntgroups = "/etc/raddb/huntgroups" hints = "/dev/null" with_ascend_hack = yes ascend_channels_per_line = 24 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Linked to module rlm_sql Module: Instantiating sql sql { driver = "rlm_sql_postgresql" server = "gcd.dpu.net" port = "" login = "radius" password = "radius" radius_db = "radius" read_groups = yes sqltrace = no sqltracefile = "/var/log/radius/sqltrace.sql" readclients = no deletestalesessions = yes num_sql_socks = 2 lifetime = 0 max_queries = 0 sql_user_name = "%{%{Stripped-User-Name}:-%{User-Name}:-none}" default_user_profile = "" nas_query = "SELECT id,nasname,shortname,type,secret FROM nas" authorize_check_query = "SELECT * FROM auth_user('%{SQL-User-Name}', '%{User-Password}', '%{NAS-Port-T$ authorize_reply_query = "" authorize_group_check_query = "SELECT c.id, g.groupname, c.attribute, c.value, c.op FROM rad_groupcheck A$ authorize_group_reply_query = "SELECT r.id, g.groupname, r.attribute, r.value, r.Op FROM rad_groupreply A$ accounting_onoff_query = "" accounting_update_query = "INSERT into rad_acct (id, nasipaddress, nasportid, acctsessionid, acctstat$ accounting_update_query_alt = "" accounting_start_query = "INSERT into rad_acct (id, nasipaddress, nasportid, acctsessionid, acctstatustype, $ accounting_start_query_alt = "" accounting_stop_query = "INSERT into rad_acct (id, nasipaddress, nasportid, acctsessionid, acctstatustype, $ accounting_stop_query_alt = "" group_membership_query = "SELECT g.groupname FROM rad_groupnames AS g, rad_users AS u WHERE$ connect_failure_retry_delay = 60 simul_count_query = "SELECT max_logins('%{SQL-User-Name}')" simul_verify_query = "" postauth_query = "" safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" } rlm_sql (sql): Driver rlm_sql_postgresql (module rlm_sql_postgresql) loaded and linked rlm_sql (sql): Attempting to connect to radius@gcd.dpu.net:/radius rlm_sql (sql): starting 0 rlm_sql (sql): Attempting to connect rlm_sql_postgresql #0 rlm_sql (sql): Connected new DB handle, #0 rlm_sql (sql): starting 1 rlm_sql (sql): Attempting to connect rlm_sql_postgresql #1 rlm_sql (sql): Connected new DB handle, #1 Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Instantiating apt_port exec apt_port { wait = yes program = "/etc/raddb/apt_port" input_pairs = "request" output_pairs = "request" shell_escape = yes } Module: Checking accounting {...} for more modules to load Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipv6addr = :: IPv6 address [::] port = 0 /etc/raddb/radiusd.conf[249]: Error binding to port for :: port 1812

3 2

Max-Octets
by Brent 20 May '11

20 May '11

Please help i`ve configured the follow to enforce data limmits per user , sqlcounter noresetBytecounter { counter-name = Total-Max-Octets check-name = Max-Octets reply-name = ChilliSpot-Max-Total-Octets sqlmod-inst = sql key = User-Name reset = never query = "SELECT (SUM(AcctInputOctets)+SUM(AcctOutputOctets)) FROM radacct WHERE UserName='%{%k}'" } However it is not disconecting the user from the network once limmit has been reached , however if i log the user out and back in it then says user limmit reached , Any ideas on how i can disconect the user , PS : i have added chillispots dictionary to freeradius dictionary Many Thanks Brent -- View this message in context: http://freeradius.1045715.n5.nabble.com/Max-Octets-tp4412382p4412382.html Sent from the FreeRadius - User mailing list archive at Nabble.com.

2 1

ntlm_auth authentication results logging messages
by John Douglass 20 May '11

20 May '11

I am running freeradius-2.1.10 and ntlm_auth Version 3.0.33-3.29.el5_6.2. Because our AD is managed by a different area (and we rely upon this for user authentication), I am looking for ways to assist our customer support area with appropriate logs to help debug AD issues. Sometimes, due to bad processes, things don't always stay in sync across the domain. What I have found is that ntlm_auth can return a variety of states like the following (I am sure there is more): [root@dvlana ~]# ntlm_auth --request-nt-key --domain=AD --username=douglass --password=CORRECTPASSWORD NT_STATUS_OK: Success (0x0) [root@dvlana ~]# ntlm_auth --request-nt-key --domain=AD --username=douglass --password=BADPASSWORDHERE NT_STATUS_WRONG_PASSWORD: Wrong Password (0xc000006a) [root@dvlana ~]# ntlm_auth --request-nt-key --domain=AD --username=douglass --password=CORRECTPASSWORD NT_STATUS_ACCOUNT_DISABLED: Account disabled (0xc0000072) [root@dvlana ~]# ntlm_auth --request-nt-key --domain=AD --username=douglass12 --password=PASSWORD NT_STATUS_NO_SUCH_USER: No such user (0xc0000064) Now, the actual ntlm_auth command within the $RADIUS/modules/mschap does read: ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --username=%{%{Stripped-User-Name}:-%{User-Name:-None}} --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}" So it's not doing necessarily the same kind of authentication command as I was doing above but I have no idea how to simulate a challege request on command line to verify :) I found a similar user in an old thread who submitted a patch: (http://freeradius.1045715.n5.nabble.com/Capturing-ntlm-auth-failure-reasons…) And it appears that this patch made it into the rlm_mschap.c module code: if (result != 0) { char *p; VALUE_PAIR *vp = NULL; RDEBUG2("External script failed."); vp = pairmake("Module-Failure-Message", "", T_OP_EQ); if (!vp) { radlog_request(L_ERR, 0, request, "No memory to allocate Module-Failure-Message"); return RLM_MODULE_FAIL; } p = strchr(buffer, '\n'); if (p) *p = '\0'; snprintf(vp->vp_strvalue, sizeof(vp->vp_strvalue), "%s: External script says %s", inst->xlat_name, buffer); vp->length = strlen(vp->vp_strvalue); pairadd(&request->packet->vps, vp); return -1; } However, when I view my debug for freeradius: mschap] FAILED: MS-CHAP2-Response is incorrect ++[mschap] returns reject [eap] Freeing handler ++[eap] returns reject Failed to authenticate the user. Login incorrect (mschap: External script says Logon failure (0xc000006d)): [asdf/<via Auth-Type = EAP>] (from client LAWN-WiSM port 29 cli 00-25-00-f5-a3-2b via TLS tunnel) However, "Logon failure" is nebulous when it could be either "bad password", "account disabled", or "no such user" that comes out of the "ntlm_auth" command (at least when I run it by hand). Is this the fault of the results of ntlm_auth being vague or is something else at play? I also see that there may be a pair added with "Module-Failure-Message". No where do I see that in a debug session when I force a failure to occur (debug is below). Would that pair show up if it were available? If so, any suggestions on how to get the output of ntlm_auth logged correctly? Am I missing a logging option or configuration option to enable me to get additional information out of the ntlm_auth failure or is this code not functioning correctly? Below is a full debug of a failed authentication with a non-existent user "asdf": rad_recv: Access-Request packet from host 10.80.10.42 port 32769, id=54, length=180 User-Name = "asdf" Calling-Station-Id = "00-25-00-f5-a3-2b" Called-Station-Id = "00-25-45-37-5c-60:GTtestwpa" NAS-Port = 29 NAS-IP-Address = 10.80.10.42 NAS-Identifier = "Rich-core-WiSM-E" Airespace-Wlan-Id = 7 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "809" EAP-Message = 0x020200090161736466 Message-Authenticator = 0xbeb78b0b65e4a5537d6a1e14f56a93ac server wpa { # Executing section authorize from file /services/freeradius/etc/raddb//sites-enabled/dvlan-wpa +- entering group authorize {...} ++[preprocess] returns ok [eap] EAP packet type response id 2 length 9 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated [sqlwpa] expand: %{Stripped-User-Name} -> [sqlwpa] ... expanding second conditional [sqlwpa] expand: %{User-Name} -> asdf [sqlwpa] expand: %{%{User-Name}:-DEFAULT} -> asdf [sqlwpa] expand: %{%{Stripped-User-Name}:-%{%{User-Name}:-DEFAULT}} -> asdf [sqlwpa] sql_set_user escaped user --> 'asdf' rlm_sql (sqlwpa): Reserving sql socket id: 63 [sqlwpa] expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'asdf' ORDER BY id [sqlwpa] expand: SELECT determineGroup('%{Calling-Station-Id}','%{SQL-User-Name}','%{Called-Station-Id}') as groupname -> SELECT determineGroup('00-25-00-f5-a3-2b','asdf','00-25-45-37-5c-60:GTtestwpa') as groupname [sqlwpa] expand: SELECT id, groupname, attribute, value, op FROM radgroupcheck WHERE groupname = '%{Sql-Group}' ORDER BY id -> SELECT id, groupname, attribute, value, op FROM radgroupcheck WHERE groupname = 'NOTAUTHORIZED' ORDER BY id [sqlwpa] User found in group NOTAUTHORIZED [sqlwpa] expand: SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{Sql-Group}' ORDER BY id -> SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = 'NOTAUTHORIZED' ORDER BY id rlm_sql (sqlwpa): Released sql socket id: 63 ++[sqlwpa] returns ok Found Auth-Type = EAP # Executing group from file /services/freeradius/etc/raddb//sites-enabled/dvlan-wpa +- entering group authenticate {...} [eap] EAP Identity [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled } # server wpa Sending Access-Challenge of id 54 to 10.80.10.42 port 32769 Tunnel-Private-Group-Id:0 = "1296" Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 EAP-Message = 0x010300061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x31b2f23b31b1eb74b6745cb38a442dac Finished request 0. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.80.10.42 port 32769, id=55, length=353 User-Name = "asdf" Calling-Station-Id = "00-25-00-f5-a3-2b" Called-Station-Id = "00-25-45-37-5c-60:GTtestwpa" NAS-Port = 29 NAS-IP-Address = 10.80.10.42 NAS-Identifier = "Rich-core-WiSM-E" Airespace-Wlan-Id = 7 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "809" EAP-Message = 0x020300a419800000009a16030100950100009103014dd565aa6f9f79a7fcdb3709b02977dec9ebd8d8aeb7a7bdf7058c390773fbf2000056c00ac009c007c008c013c014c011c012c004c005c002c003c00ec00fc00cc00d002f000500040035000a000900030008000600320033003800390016001500140013001200110034003a0018001b001a00170019000101000012000a00080006001700180019000b00020100 State = 0x31b2f23b31b1eb74b6745cb38a442dac Message-Authenticator = 0xdf3024ad1da5df56ca9df7671138d5cf server wpa { # Executing section authorize from file /services/freeradius/etc/raddb//sites-enabled/dvlan-wpa +- entering group authorize {...} ++[preprocess] returns ok [eap] EAP packet type response id 3 length 164 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /services/freeradius/etc/raddb//sites-enabled/dvlan-wpa +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 154 [peap] Length Included [peap] eaptls_verify returned 11 [peap] (other): before/accept initialization [peap] TLS_accept: before/accept initialization [peap] <<< TLS 1.0 Handshake [length 0095], ClientHello [peap] TLS_accept: SSLv3 read client hello A [peap] >>> TLS 1.0 Handshake [length 002a], ServerHello [peap] TLS_accept: SSLv3 write server hello A [peap] >>> TLS 1.0 Handshake [length 0377], Certificate [peap] TLS_accept: SSLv3 write certificate A [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [peap] TLS_accept: SSLv3 write server done A [peap] TLS_accept: SSLv3 flush data [peap] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled } # server wpa Sending Access-Challenge of id 55 to 10.80.10.42 port 32769 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0xbfa46c8d26d724fee83a3eeb378a64410d9d92994f07208a0e90468a34af8d7d77e14aaa1d78b24f6a95af7034d8482d4e43626cc74c2bb5331b09dc59ba38b1fa60c6b9cfe841b2411089cf0203010001a381d03081cd301f0603551d2304183016801448e668f92bd2b295d747d82320104f3398909fd4300e0603551d0f0101ff0404030204f0301d0603551d250416301406082b0601050507030106082b0601050507030230200603551d1104193017821567747770612e6c61776e2e6761746563682e656475303a0603551d1f04333031302fa02da02b8629687474703a2f2f63726c2e67656f74727573742e636f6d2f63726c732f73656375 EAP-Message = 0x726563612e63726c301d0603551d0e041604146bd1c091faa8c9499db94ce449259017b097ecb2300d06092a864886f70d01010505000381810025a28346aaa5901f60d6e5004331971e1352103836c33a9845bfa928307a0472c7c87fe6eab5c81faecfca6b2d23af4496e70ef6a1ad775746a6329fef7e960eb8e06274c161accca9277c94b25bc03cdec5ed92b059ea5bd6fbb2668fe5a3d6da4454579368de2c4a583576a1ffae45c7e89c5ce8164572c5af1272ac0042ae16030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x31b2f23b30b6eb74b6745cb38a442dac Finished request 1. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.80.10.42 port 32769, id=56, length=397 User-Name = "asdf" Calling-Station-Id = "00-25-00-f5-a3-2b" Called-Station-Id = "00-25-45-37-5c-60:GTtestwpa" NAS-Port = 29 NAS-IP-Address = 10.80.10.42 NAS-Identifier = "Rich-core-WiSM-E" Airespace-Wlan-Id = 7 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "809" EAP-Message = 0x020400d01980000000c61603010086100000820080824a1517cc81fa0cde571f1c83147f0123f0ef6edf77a5db2c0ef03549a153c52f52c9d79e264c32cd37c8dc2155296528d2e9c7c66dcf6e6f638f11ffbdd7b932ed59299291db2f03e0830a15c7ec73bc8d42e19dc072f1a8bbbcf76df8a5cd02f7539a38c738242efdfc44fc232c20453886259ef36a33e7efd7aee22ca9d91403010001011603010030699d7d6451132470124ce6ea5e09507ec2504300d2e58010c2bfbcce1f50706a8689bfcc0287372fbf62cd49d04d974f State = 0x31b2f23b30b6eb74b6745cb38a442dac Message-Authenticator = 0x862f8d931f012e27f3a8d078d66e228f server wpa { # Executing section authorize from file /services/freeradius/etc/raddb//sites-enabled/dvlan-wpa +- entering group authorize {...} ++[preprocess] returns ok [eap] EAP packet type response id 4 length 208 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /services/freeradius/etc/raddb//sites-enabled/dvlan-wpa +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 198 [peap] Length Included [peap] eaptls_verify returned 11 [peap] <<< TLS 1.0 Handshake [length 0086], ClientKeyExchange [peap] TLS_accept: SSLv3 read client key exchange A [peap] <<< TLS 1.0 ChangeCipherSpec [length 0001] [peap] <<< TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 read finished A [peap] >>> TLS 1.0 ChangeCipherSpec [length 0001] [peap] TLS_accept: SSLv3 write change cipher spec A [peap] >>> TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 write finished A [peap] TLS_accept: SSLv3 flush data [peap] (other): SSL negotiation finished successfully SSL Connection Established [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled } # server wpa Sending Access-Challenge of id 56 to 10.80.10.42 port 32769 EAP-Message = 0x0105004119001403010001011603010030bf952c90cdb0d1bcdaacff835f16d35972e70d499f19ece0e99d9245d4fb5c6fea2d3006fa95d3318e3e653b09cc52e4 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x31b2f23b33b7eb74b6745cb38a442dac Finished request 2. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.80.10.42 port 32769, id=57, length=195 User-Name = "asdf" Calling-Station-Id = "00-25-00-f5-a3-2b" Called-Station-Id = "00-25-45-37-5c-60:GTtestwpa" NAS-Port = 29 NAS-IP-Address = 10.80.10.42 NAS-Identifier = "Rich-core-WiSM-E" Airespace-Wlan-Id = 7 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "809" EAP-Message = 0x020500061900 State = 0x31b2f23b33b7eb74b6745cb38a442dac Message-Authenticator = 0x58658f27fe9295794b51b5a904ee64d8 server wpa { # Executing section authorize from file /services/freeradius/etc/raddb//sites-enabled/dvlan-wpa +- entering group authorize {...} ++[preprocess] returns ok [eap] EAP packet type response id 5 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /services/freeradius/etc/raddb//sites-enabled/dvlan-wpa +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake is finished [peap] eaptls_verify returned 3 [peap] eaptls_process returned 3 [peap] EAPTLS_SUCCESS [peap] Session established. Decoding tunneled attributes. [peap] Peap state TUNNEL ESTABLISHED ++[eap] returns handled } # server wpa Sending Access-Challenge of id 57 to 10.80.10.42 port 32769 EAP-Message = 0x0106002b19001703010020972a004adb0dbb0c23c5cca84018c922ee11b6a5541026a93f86adac05dfadc1 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x31b2f23b32b4eb74b6745cb38a442dac Finished request 3. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.80.10.42 port 32769, id=58, length=232 User-Name = "asdf" Calling-Station-Id = "00-25-00-f5-a3-2b" Called-Station-Id = "00-25-45-37-5c-60:GTtestwpa" NAS-Port = 29 NAS-IP-Address = 10.80.10.42 NAS-Identifier = "Rich-core-WiSM-E" Airespace-Wlan-Id = 7 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "809" EAP-Message = 0x0206002b19001703010020fe91dead08f0cc02d9d4581c8ccc77178098fd94a677579d72445bf14cde899f State = 0x31b2f23b32b4eb74b6745cb38a442dac Message-Authenticator = 0x331fbbeecc815c337c717573976b7da2 server wpa { # Executing section authorize from file /services/freeradius/etc/raddb//sites-enabled/dvlan-wpa +- entering group authorize {...} ++[preprocess] returns ok [eap] EAP packet type response id 6 length 43 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /services/freeradius/etc/raddb//sites-enabled/dvlan-wpa +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state WAITING FOR INNER IDENTITY [peap] Identity - asdf [peap] Got inner identity 'asdf' [peap] Setting default EAP type for tunneled EAP session. [peap] Got tunneled request EAP-Message = 0x020600090161736466 server wpa { PEAP: Setting User-Name to asdf Sending tunneled request EAP-Message = 0x020600090161736466 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "asdf" Calling-Station-Id = "00-25-00-f5-a3-2b" Called-Station-Id = "00-25-45-37-5c-60:GTtestwpa" NAS-Port = 29 NAS-IP-Address = 10.80.10.42 NAS-Identifier = "Rich-core-WiSM-E" Airespace-Wlan-Id = 7 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "809" server wpa { # Executing section authorize from file /services/freeradius/etc/raddb//sites-enabled/dvlan-wpa +- entering group authorize {...} ++[preprocess] returns ok [eap] EAP packet type response id 6 length 9 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated [sqlwpa] expand: %{Stripped-User-Name} -> [sqlwpa] ... expanding second conditional [sqlwpa] expand: %{User-Name} -> asdf [sqlwpa] expand: %{%{User-Name}:-DEFAULT} -> asdf [sqlwpa] expand: %{%{Stripped-User-Name}:-%{%{User-Name}:-DEFAULT}} -> asdf [sqlwpa] sql_set_user escaped user --> 'asdf' rlm_sql (sqlwpa): Reserving sql socket id: 62 [sqlwpa] expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'asdf' ORDER BY id [sqlwpa] expand: SELECT determineGroup('%{Calling-Station-Id}','%{SQL-User-Name}','%{Called-Station-Id}') as groupname -> SELECT determineGroup('00-25-00-f5-a3-2b','asdf','00-25-45-37-5c-60:GTtestwpa') as groupname [sqlwpa] expand: SELECT id, groupname, attribute, value, op FROM radgroupcheck WHERE groupname = '%{Sql-Group}' ORDER BY id -> SELECT id, groupname, attribute, value, op FROM radgroupcheck WHERE groupname = 'NOTAUTHORIZED' ORDER BY id [sqlwpa] User found in group NOTAUTHORIZED [sqlwpa] expand: SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{Sql-Group}' ORDER BY id -> SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = 'NOTAUTHORIZED' ORDER BY id rlm_sql (sqlwpa): Released sql socket id: 62 ++[sqlwpa] returns ok Found Auth-Type = EAP # Executing group from file /services/freeradius/etc/raddb//sites-enabled/dvlan-wpa +- entering group authenticate {...} [eap] EAP Identity [eap] processing type mschapv2 rlm_eap_mschapv2: Issuing Challenge ++[eap] returns handled } # server wpa [peap] Got tunneled reply code 11 Tunnel-Private-Group-Id:0 = "1296" Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 EAP-Message = 0x0107001e1a0107001910bf7d536f84202f25bf5f17b9e50ce30061736466 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x33f674ce33f16e76ae35e5f2efd87279 [peap] Got tunneled reply RADIUS code 11 Tunnel-Private-Group-Id:0 = "1296" Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 EAP-Message = 0x0107001e1a0107001910bf7d536f84202f25bf5f17b9e50ce30061736466 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x33f674ce33f16e76ae35e5f2efd87279 [peap] Got tunneled Access-Challenge ++[eap] returns handled } # server wpa Sending Access-Challenge of id 58 to 10.80.10.42 port 32769 EAP-Message = 0x0107003b19001703010030797656bba21df6dbff25f4fb69fa506584cb492a8ff148c2068733a4f1cdab3427c0180871bd822a0f03e227d5bce95d Message-Authenticator = 0x00000000000000000000000000000000 State = 0x31b2f23b35b5eb74b6745cb38a442dac Finished request 4. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.80.10.42 port 32769, id=59, length=280 User-Name = "asdf" Calling-Station-Id = "00-25-00-f5-a3-2b" Called-Station-Id = "00-25-45-37-5c-60:GTtestwpa" NAS-Port = 29 NAS-IP-Address = 10.80.10.42 NAS-Identifier = "Rich-core-WiSM-E" Airespace-Wlan-Id = 7 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "809" EAP-Message = 0x0207005b19001703010050e600f6973e85bcc2bcfecb03493bb4c70c4dc5e360fec76f2e8d5820fab9a8d904d2a9fd583dd02717f2b9ad8d1a390d263da98901eca94d4f6b35b065737f522e377b97661bb14d21c129b16bc0c650 State = 0x31b2f23b35b5eb74b6745cb38a442dac Message-Authenticator = 0x57fc4a631ecb4d869888d51d38dd52a6 server wpa { # Executing section authorize from file /services/freeradius/etc/raddb//sites-enabled/dvlan-wpa +- entering group authorize {...} ++[preprocess] returns ok [eap] EAP packet type response id 7 length 91 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /services/freeradius/etc/raddb//sites-enabled/dvlan-wpa +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state phase2 [peap] EAP type mschapv2 [peap] Got tunneled request EAP-Message = 0x0207003f1a0207003a31c3fc9644677023c2240c42be8ebcc26000000000000000001d977e4d0232ca801f0e20dde8767c7004d4ca2197cdf39b0061736466 server wpa { PEAP: Setting User-Name to asdf Sending tunneled request EAP-Message = 0x0207003f1a0207003a31c3fc9644677023c2240c42be8ebcc26000000000000000001d977e4d0232ca801f0e20dde8767c7004d4ca2197cdf39b0061736466 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "asdf" State = 0x33f674ce33f16e76ae35e5f2efd87279 Calling-Station-Id = "00-25-00-f5-a3-2b" Called-Station-Id = "00-25-45-37-5c-60:GTtestwpa" NAS-Port = 29 NAS-IP-Address = 10.80.10.42 NAS-Identifier = "Rich-core-WiSM-E" Airespace-Wlan-Id = 7 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "809" server wpa { # Executing section authorize from file /services/freeradius/etc/raddb//sites-enabled/dvlan-wpa +- entering group authorize {...} ++[preprocess] returns ok [eap] EAP packet type response id 7 length 63 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated [sqlwpa] expand: %{Stripped-User-Name} -> [sqlwpa] ... expanding second conditional [sqlwpa] expand: %{User-Name} -> asdf [sqlwpa] expand: %{%{User-Name}:-DEFAULT} -> asdf [sqlwpa] expand: %{%{Stripped-User-Name}:-%{%{User-Name}:-DEFAULT}} -> asdf [sqlwpa] sql_set_user escaped user --> 'asdf' rlm_sql (sqlwpa): Reserving sql socket id: 61 [sqlwpa] expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'asdf' ORDER BY id [sqlwpa] expand: SELECT determineGroup('%{Calling-Station-Id}','%{SQL-User-Name}','%{Called-Station-Id}') as groupname -> SELECT determineGroup('00-25-00-f5-a3-2b','asdf','00-25-45-37-5c-60:GTtestwpa') as groupname [sqlwpa] expand: SELECT id, groupname, attribute, value, op FROM radgroupcheck WHERE groupname = '%{Sql-Group}' ORDER BY id -> SELECT id, groupname, attribute, value, op FROM radgroupcheck WHERE groupname = 'NOTAUTHORIZED' ORDER BY id [sqlwpa] User found in group NOTAUTHORIZED [sqlwpa] expand: SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{Sql-Group}' ORDER BY id -> SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = 'NOTAUTHORIZED' ORDER BY id rlm_sql (sqlwpa): Released sql socket id: 61 ++[sqlwpa] returns ok Found Auth-Type = EAP # Executing group from file /services/freeradius/etc/raddb//sites-enabled/dvlan-wpa +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/mschapv2 [eap] processing type mschapv2 [mschapv2] # Executing group from file /services/freeradius/etc/raddb//sites-enabled/dvlan-wpa [mschapv2] +- entering group MS-CHAP {...} [mschap] Creating challenge hash with username: asdf [mschap] Told to do MS-CHAPv2 for asdf with NT-Password [mschap] WARNING: Deprecated conditional expansion ":-". See "man unlang" for details [mschap] ... expanding second conditional [mschap] WARNING: Deprecated conditional expansion ":-". See "man unlang" for details [mschap] expand: %{User-Name:-None} -> asdf [mschap] expand: --username=%{Stripped-User-Name:-%{User-Name:-None}} -> --username=asdf [mschap] mschap2: bf [mschap] Creating challenge hash with username: asdf [mschap] expand: --challenge=%{mschap:Challenge:-00} -> --challenge=0a7a21bf18732797 [mschap] expand: --nt-response=%{mschap:NT-Response:-00} -> --nt-response=1d977e4d0232ca801f0e20dde8767c7004d4ca2197cdf39b Exec-Program output: Logon failure (0xc000006d) Exec-Program-Wait: plaintext: Logon failure (0xc000006d) Exec-Program: returned: 1 [mschap] External script failed. [mschap] FAILED: MS-CHAP2-Response is incorrect ++[mschap] returns reject [eap] Freeing handler ++[eap] returns reject Failed to authenticate the user. Login incorrect (mschap: External script says Logon failure (0xc000006d)): [asdf/<via Auth-Type = EAP>] (from client LAWN-WiSM port 29 cli 00-25-00-f5-a3-2b via TLS tunnel) } # server wpa [peap] Got tunneled reply code 3 Tunnel-Private-Group-Id:0 = "1296" Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 MS-CHAP-Error = "\007E=691 R=1" EAP-Message = 0x04070004 Message-Authenticator = 0x00000000000000000000000000000000 [peap] Got tunneled reply RADIUS code 3 Tunnel-Private-Group-Id:0 = "1296" Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 MS-CHAP-Error = "\007E=691 R=1" EAP-Message = 0x04070004 Message-Authenticator = 0x00000000000000000000000000000000 [peap] Tunneled authentication was rejected. [peap] FAILURE ++[eap] returns handled } # server wpa Sending Access-Challenge of id 59 to 10.80.10.42 port 32769 EAP-Message = 0x0108002b190017030100206e20a4a57f13f51e3edc4d3cdda2a7e64d8d8dde84c0cd825af17de0b236bbdc Message-Authenticator = 0x00000000000000000000000000000000 State = 0x31b2f23b34baeb74b6745cb38a442dac Finished request 5. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.80.10.42 port 32769, id=60, length=232 User-Name = "asdf" Calling-Station-Id = "00-25-00-f5-a3-2b" Called-Station-Id = "00-25-45-37-5c-60:GTtestwpa" NAS-Port = 29 NAS-IP-Address = 10.80.10.42 NAS-Identifier = "Rich-core-WiSM-E" Airespace-Wlan-Id = 7 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "809" EAP-Message = 0x0208002b1900170301002022152bb0e74b3277ae1b8711d62a966e885e9b7d5beb26f9fc716b74cadea38e State = 0x31b2f23b34baeb74b6745cb38a442dac Message-Authenticator = 0x14d7bb55cd857f2216d2addb790a6291 server wpa { # Executing section authorize from file /services/freeradius/etc/raddb//sites-enabled/dvlan-wpa +- entering group authorize {...} ++[preprocess] returns ok [eap] EAP packet type response id 8 length 43 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /services/freeradius/etc/raddb//sites-enabled/dvlan-wpa +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state send tlv failure [peap] Received EAP-TLV response. [peap] The users session was previously rejected: returning reject (again.) [peap] *** This means you need to read the PREVIOUS messages in the debug output [peap] *** to find out the reason why the user was rejected. [peap] *** Look for "reject" or "fail". Those earlier messages will tell you. [peap] *** what went wrong, and how to fix the problem. [eap] Handler failed in EAP/peap [eap] Failed in EAP select ++[eap] returns invalid Failed to authenticate the user. Login incorrect: [asdf/<via Auth-Type = EAP>] (from client LAWN-WiSM port 29 cli 00-25-00-f5-a3-2b) } # server wpa Using Post-Auth-Type Reject # Executing group from file /services/freeradius/etc/raddb//sites-enabled/dvlan-wpa +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> asdf attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 6 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 6 Sending Access-Reject of id 60 to 10.80.10.42 port 32769 EAP-Message = 0x04080004 Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.8 seconds. Cleaning up request 0 ID 54 with timestamp +26 Cleaning up request 1 ID 55 with timestamp +26 Cleaning up request 2 ID 56 with timestamp +26 Cleaning up request 3 ID 57 with timestamp +26 Cleaning up request 4 ID 58 with timestamp +26 Cleaning up request 5 ID 59 with timestamp +26 Waking up in 1.0 seconds. Cleaning up request 6 ID 60 with timestamp +26 Ready to process requests.

4 3