- Freeradius-Users - lists.freeradius.org

Authentication issues from Apple devices
by stentofon 14 May '11

14 May '11

Hello. I have configured a Wireless Hotspot using the EasyHotSpot system, that uses FreeRadius for authentication. I am having problems only when Apple devices (iphone, ipad, macbooks) attempt to connect to the hotspot. This is confusing, as all other devices and software (Winxp, Vista, 7, Symbian, Blackberry, Android etc) authenticate perfectly. As a test case, and while running debugging, I attempted to connect with my Blackberry and an Iphone using the same username and password. I have attached the results. As you will see, using the same username and password, the blackberry authenticates while the iphone fails. I cannot see any reason for this in the log. Can anyone please assist? Failed log: Ready to process requests. rad_recv: Access-Request packet from host 127.0.0.1 port 60277, id=0, length=216 User-Name = "sandra" CHAP-Challenge = 0x0571777ec7661c411af641e8952291b9 CHAP-Password = 0x00120c16a8ff125a7a348459a0f40a86a9 NAS-IP-Address = 0.0.0.0 Service-Type = Login-User Framed-IP-Address = 192.168.182.10 Calling-Station-Id = "DC-2B-61-9C-92-E6" Called-Station-Id = "00-0D-56-9C-AC-F6" NAS-Identifier = "nas01" Acct-Session-Id = "4dcde5a500000000" NAS-Port-Type = Wireless-802.11 NAS-Port = 0 Message-Authenticator = 0x35f8e8bc299636c4cd468b533de65f78 WISPr-Logoff-URL = "http://192.168.182.1:3990/logoff" +- entering group authorize {...} ++[preprocess] returns ok [chap] Setting 'Auth-Type := CHAP' ++[chap] returns ok ++[mschap] returns noop [suffix] No '@' in User-Name = "sandra", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] No EAP-Message, not doing EAP ++[eap] returns noop ++[unix] returns notfound ++[files] returns noop expand: %{User-Name} -> sandra [sql] sql_set_user escaped user --> 'sandra' rlm_sql (sql): Reserving sql socket id: 4 expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'sandra' ORDER BY id [sql] User found in radcheck table expand: SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'sandra' ORDER BY id expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = 'sandra' ORDER BY priority rlm_sql (sql): Released sql socket id: 4 ++[sql] returns ok rlm_sqlcounter: Entering module authorize code rlm_sqlcounter: Could not find Check item value pair ++[max_all_mb] returns noop rlm_sqlcounter: Entering module authorize code rlm_sqlcounter: Could not find Check item value pair ++[noresetcounter] returns noop [expiration] Checking Expiration time: 'September 11 2011 24:00:00' ++[expiration] returns ok ++[logintime] returns noop [pap] Found existing Auth-Type, not changing it. ++[pap] returns noop Found Auth-Type = CHAP +- entering group CHAP {...} [chap] login attempt by "sandra" with CHAP password [chap] Using clear text password "sandra" for user sandra authentication. [chap] Password check failed ++[chap] returns reject Failed to authenticate the user. Using Post-Auth-Type Reject +- entering group REJECT {...} expand: %{User-Name} -> sandra attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 0 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 0 Sending Access-Reject of id 0 to 127.0.0.1 port 60277 Waking up in 4.9 seconds. Cleaning up request 0 ID 0 with timestamp +36 Ready to process requests. Sucessful Log: rad_recv: Access-Request packet from host 127.0.0.1 port 44107, id=0, length=216 User-Name = "sandra" CHAP-Challenge = 0x97824e8524637118ae2cf716a0362b97 CHAP-Password = 0x00f729a50979c25ef7d9d9e5e4cc1b2907 NAS-IP-Address = 0.0.0.0 Service-Type = Login-User Framed-IP-Address = 192.168.182.8 Calling-Station-Id = "CC-55-AD-93-77-E6" Called-Station-Id = "00-0D-56-9C-AC-F6" NAS-Identifier = "nas01" Acct-Session-Id = "4dcde8c300000001" NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Message-Authenticator = 0xf30387317dabf479ce7642e776e0295e WISPr-Logoff-URL = "http://192.168.182.1:3990/logoff" +- entering group authorize {...} ++[preprocess] returns ok [chap] Setting 'Auth-Type := CHAP' ++[chap] returns ok ++[mschap] returns noop [suffix] No '@' in User-Name = "sandra", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] No EAP-Message, not doing EAP ++[eap] returns noop ++[unix] returns notfound ++[files] returns noop expand: %{User-Name} -> sandra [sql] sql_set_user escaped user --> 'sandra' rlm_sql (sql): Reserving sql socket id: 3 expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'sandra' ORDER BY id [sql] User found in radcheck table expand: SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'sandra' ORDER BY id expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = 'sandra' ORDER BY priority rlm_sql (sql): Released sql socket id: 3 ++[sql] returns ok rlm_sqlcounter: Entering module authorize code rlm_sqlcounter: Could not find Check item value pair ++[max_all_mb] returns noop rlm_sqlcounter: Entering module authorize code rlm_sqlcounter: Could not find Check item value pair ++[noresetcounter] returns noop [expiration] Checking Expiration time: 'September 11 2011 24:00:00' ++[expiration] returns ok ++[logintime] returns noop [pap] Found existing Auth-Type, not changing it. ++[pap] returns noop Found Auth-Type = CHAP +- entering group CHAP {...} [chap] login attempt by "sandra" with CHAP password [chap] Using clear text password "sandra" for user sandra authentication. [chap] chap user sandra authenticated succesfully ++[chap] returns ok +- entering group session {...} expand: /var/log/freeradius/radutmp -> /var/log/freeradius/radutmp expand: %{User-Name} -> sandra ++[radutmp] returns ok +- entering group post-auth {...} expand: %{User-Name} -> sandra [sql] sql_set_user escaped user --> 'sandra' expand: %{User-Password} -> expand: %{Chap-Password} -> 0x00f729a50979c25ef7d9d9e5e4cc1b2907 expand: INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S') -> INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'sandra', '0x00f729a50979c25ef7d9d9e5e4cc1b2907', 'Access-Accept', '2011-05-14 12:28:43') rlm_sql (sql) in sql_postauth: query is INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'sandra', '0x00f729a50979c25ef7d9d9e5e4cc1b2907', 'Access-Accept', '2011-05-14 12:28:43') rlm_sql (sql): Reserving sql socket id: 2 rlm_sql (sql): Released sql socket id: 2 ++[sql] returns ok ++[exec] returns noop Sending Access-Accept of id 0 to 127.0.0.1 port 44107 WISPr-Bandwidth-Max-Down := 256000 Idle-Timeout := 600 WISPr-Session-Terminate-Time := "2011-9-11T24:00:00" Acct-Interim-Interval := 120 Session-Timeout = 10409477 Finished request 1. -- View this message in context: http://freeradius.1045715.n5.nabble.com/Authentication-issues-from-Apple-de… Sent from the FreeRadius - User mailing list archive at Nabble.com.

3 6

Renaming during Machine Authentication
by Mark Jones 14 May '11

14 May '11

Hi all i have freeradius 2.1.10 setup on a SLES server. When the workstation boots it sends an mschapv2 request in the form host/machinename. What is the best way to convert this to machinename$ ? Sorry if this has been asked before Im stumped and cannot find the answer. Here is part of the log: Ready to process requests. rad_recv: Access-Request packet from host 10.152.0.100 port 32819, id=79, length=203 NAS-IP-Address = 10.152.0.100 NAS-Port = 0 NAS-Port-Type = Wireless-802.11 User-Name = "host/TECH-11501" Calling-Station-Id = "00265EE9B2CA" Called-Station-Id = "000B86611894" MS-CHAP-Challenge = 0x0568442cb1608fce03cb2662dcf52694 MS-CHAP2-Response = 0x07007e63e9fa7fb503e4cfff2a2c00568698000000000000000057f0c5ece05913c5eeaf48096b25dcbd01f39d20a71404e1 Service-Type = Login-User Aruba-Essid-Name = "HPSD_RAD2" Aruba-Location-Id = "Tech 01" # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop [mschap] Found MS-CHAP attributes. Setting 'Auth-Type = mschap' ++[mschap] returns ok ++[digest] returns noop [suffix] No '@' in User-Name = "host/TECH-11501", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] No EAP-Message, not doing EAP ++[eap] returns noop ++[files] returns noop [ldap] performing user authorization for host/TECH-11501 [ldap] expand: (uid=%{mschap:User-Name:-%{User-Name}}) -> (uid=TECH-11501$) [ldap] expand: o=hpsd_48 -> o=hpsd_48 [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in o=hpsd_48, with filter (uid=TECH-11501$) [ldap] Added the eDirectory password xxxxx in check items as Cleartext-Password [ldap] No default NMAS login sequence [ldap] looking for check items in directory... [ldap] looking for reply items in directory... [ldap] user host/TECH-11501 authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = MSCHAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group MS-CHAP {...} [mschap] Creating challenge hash with username: host/TECH-11501 [mschap] Told to do MS-CHAPv2 for host/TECH-11501 with NT-Password [mschap] FAILED: MS-CHAP2-Response is incorrect ++[mschap] returns reject Failed to authenticate the user. Using Post-Auth-Type Reject # Executing group from file /etc/raddb/sites-enabled/default +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> host/TECH-11501 attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 13 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 13 Sending Access-Reject of id 79 to 10.152.0.100 port 32819 Waking up in 4.9 seconds. Cleaning up request 13 ID 79 with timestamp +926 Ready to process requests. Here is the log from same machine after logging in: Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.152.0.100 port 32819, id=82, length=194 NAS-IP-Address = 10.152.0.100 NAS-Port = 0 NAS-Port-Type = Wireless-802.11 User-Name = "mjones" Calling-Station-Id = "00265EE9B2CA" Called-Station-Id = "000B86611894" MS-CHAP-Challenge = 0xe744e26bd3741ff3a339f931e5d541cc MS-CHAP2-Response = 0x070001ee52a851770be78f667189c6bdec3b000000000000000050e99570745eb5a68f290dfe79879837d3997b7aa9b7b3cc Service-Type = Login-User Aruba-Essid-Name = "HPSD_RAD2" Aruba-Location-Id = "Tech 01" # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop [mschap] Found MS-CHAP attributes. Setting 'Auth-Type = mschap' ++[mschap] returns ok ++[digest] returns noop [suffix] No '@' in User-Name = "mjones", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] No EAP-Message, not doing EAP ++[eap] returns noop ++[files] returns noop [ldap] performing user authorization for mjones [ldap] expand: (uid=%{mschap:User-Name:-%{User-Name}}) -> (uid=mjones) [ldap] expand: o=hpsd_48 -> o=hpsd_48 [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in o=hpsd_48, with filter (uid=mjones) [ldap] Added the eDirectory password xxxx in check items as Cleartext-Password [ldap] looking for check items in directory... [ldap] looking for reply items in directory... [ldap] user mjones authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = MSCHAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group MS-CHAP {...} [mschap] Creating challenge hash with username: mjones [mschap] Told to do MS-CHAPv2 for mjones with NT-Password [mschap] adding MS-CHAPv2 MPPE keys ++[mschap] returns ok # Executing section post-auth from file /etc/raddb/sites-enabled/default +- entering group post-auth {...} ++[exec] returns noop Sending Access-Accept of id 82 to 10.152.0.100 port 32819 MS-CHAP2-Success = 0x07533d41344438423931334434454244384437463634353436353933374137343737324136433138463139 MS-MPPE-Recv-Key = 0x263a0e89b5a8a78aa7e728c79ea3844f MS-MPPE-Send-Key = 0xfef0768ff8ca7d3a76d43ce8feb4189b MS-MPPE-Encryption-Policy = 0x00000001 MS-MPPE-Encryption-Types = 0x00000006 Finished request 16. Going to the next request Waking up in 3.7 seconds. Cleaning up request 15 ID 81 with timestamp +1049 Waking up in 1.2 seconds. Cleaning up request 16 ID 82 with timestamp +1051 Ready to process requests. Thanks all Mark This communication is intended for the use of the recipient to which it is addressed and may contain confidential, personal and/or privileged information. If you received this e-mail in error, please advise me (by return e-mail or otherwise) immediately.

2 3

Users attributes missing from Access accept messages
by Teva AVRIL-TEIPOARII 13 May '11

13 May '11

Greetings, I have a FreeRadius 1.1.5 that I'm using in a Wimax network. I'd like to upgrade it so I've installed a FreeRadius 2.1.7. Authentication is EAP-TTLS on both. The network architecture is the same on both side. My issue is that some users attributes are missing from Access accept messages coming from the FreeRadius 2, whereas the FreeRadius 1 is working perfectly. Here below the config of both of its: FREE RADIUS 1.1.5: ACCESS ACCEPT OK WITH ALL ATTRIBUTES REQUESTED rad_recv: Access-Request packet from host 192.168.1.111:33102, id=185, length=210 User-Name = "ABCDEFGHIJKL" Calling-Station-Id = "\000\037\373"\214@" NAS-IP-Address = 192.168.1.111 NAS-Port = 1 Framed-MTU = 1400 Service-Type = Framed-User Called-Station-Id = "000084800711" NAS-Identifier = "636170632D73632D70726F64" NAS-Port-Type = 27 Attr-89 = 0x00 NWG-WiMAX-Capability = 0x000106312e3000020301 NWG-GMT-Time-Zone-Offset = 0x0000000000 NWG-BS-ID = 0x00000084800711 NWG-NSP-ID = 0x000001f9 EAP-Message = 0x029d001101423836313646303044333437 Message-Authenticator = 0x163079cdfd5e95cbbdf12114567d5225 Tue May 10 12:28:23 2011 : Debug: Processing the authorize section of radiusd.conf Sending Access-Challenge of id 185 to 192.168.1.111 port 33102 Session-Timeout = 64800 NWG-AAA-Session-Id = 0x00000001 Motorola-WiMAX-Convergence-Sublayer = 0x00 Motorola-WiMAX-Network-Domain-Name = "wimax.test" Motorola-WiMAX-EMS-Address = 10.10.10.1 Motorola-WiMAX-NTP-Server = 0x0171c54402 Motorola-WiMAX-HO-SVC-CLASS = 0x02 Motorola-WiMAX-DNS-Server-IP-Address = 0x71c2250421c22522 Motorola-WiMAX-Service-Flows = "2|Default" Motorola-WiMAX-VLAN-ID = 0x0111 Motorola-WiMAX-Maximum-Total-Bandwidth = 0x0000c3500000c350 Motorola-WiMAX-Maximum-Commit-Bandwidth = 0x0000c3500000c350 EAP-Message = 0x019e00060d20 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x42dd4346756c2acf80fbc1fd8ab0560f Tue May 10 12:28:23 2011 : Debug: Finished request 0 Tue May 10 12:28:23 2011 : Debug: Going to the next request Tue May 10 12:28:23 2011 : Debug: --- Walking the entire request list --- Tue May 10 12:28:23 2011 : Debug: Waking up in 3 seconds... rad_recv: Access-Request packet from host 192.168.1.111:33102, id=186, length=217 User-Name = "ABCDEFGHIJKL" Calling-Station-Id = "\000\037\373"\214@" NAS-IP-Address = 192.168.1.111 State = 0x42dd4346756c2acf80fbc1fd8ab0560f NAS-Port = 1 Framed-MTU = 1400 Service-Type = Framed-User Called-Station-Id = "000084800711" NAS-Identifier = "636170632D73632D70726F64" NAS-Port-Type = 27 Attr-89 = 0x00 NWG-WiMAX-Capability = 0x000106312e3000020301 NWG-GMT-Time-Zone-Offset = 0x0000000000 NWG-BS-ID = 0x00000084800711 NWG-NSP-ID = 0x000001f9 EAP-Message = 0x029e00060315 Message-Authenticator = 0x07cec79be43d3d5bf70a09d2210054f9 Tue May 10 12:28:23 2011 : Debug: Processing the authorize section of radiusd.conf Sending Access-Challenge of id 186 to 192.168.1.111 port 33102 Session-Timeout = 64800 NWG-AAA-Session-Id = 0x00000001 Motorola-WiMAX-Convergence-Sublayer = 0x00 Motorola-WiMAX-Network-Domain-Name = "wimax.test" Motorola-WiMAX-EMS-Address = 10.10.10.1 Motorola-WiMAX-NTP-Server = 0x0171c54402 Motorola-WiMAX-HO-SVC-CLASS = 0x02 Motorola-WiMAX-DNS-Server-IP-Address = 0x71c2250421c22522 Motorola-WiMAX-Service-Flows = "2|Default" Motorola-WiMAX-VLAN-ID = 0x0111 Motorola-WiMAX-Maximum-Total-Bandwidth = 0x0000c3500000c350 Motorola-WiMAX-Maximum-Commit-Bandwidth = 0x0000c3500000c350 EAP-Message = 0x019f00061520 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xd5efd74ea5bf2690ca9b30b80c0c0d1f Tue May 10 12:28:23 2011 : Debug: Finished request 1 Tue May 10 12:28:23 2011 : Debug: Going to the next request Tue May 10 12:28:23 2011 : Debug: Waking up in 3 seconds... rad_recv: Access-Request packet from host 192.168.1.111:33102, id=187, length=291 User-Name = "ABCDEFGHIJKL" Calling-Station-Id = "\000\037\373"\214@" NAS-IP-Address = 192.168.1.111 State = 0xd5efd74ea5bf2690ca9b30b80c0c0d1f NAS-Port = 1 Framed-MTU = 1400 Service-Type = Framed-User Called-Station-Id = "000084800711" NAS-Identifier = "636170632D73632D70726F64" NAS-Port-Type = 27 Attr-89 = 0x00 NWG-WiMAX-Capability = 0x000106312e3000020301 NWG-GMT-Time-Zone-Offset = 0x0000000000 NWG-BS-ID = 0x00000084800711 NWG-NSP-ID = 0x000001f9 EAP-Message = 0x029f005015001603010045010000410301bd274996a0d2a8dfc66a64a99828716e17e9b2f7 0921563de9b960534980670600001a0015001600330009000a002f000700670039006b003c00 35003d0100 Message-Authenticator = 0xc84be94975c1643cb9bb387a864959b5 Tue May 10 12:28:23 2011 : Debug: rlm_eap: EAP/ttls Sending Access-Challenge of id 187 to 192.168.1.111 port 33102 Session-Timeout = 64800 NWG-AAA-Session-Id = 0x00000001 Motorola-WiMAX-Convergence-Sublayer = 0x00 Motorola-WiMAX-Network-Domain-Name = "wimax.test" Motorola-WiMAX-EMS-Address = 10.10.10.1 Motorola-WiMAX-NTP-Server = 0x0171c54402 Motorola-WiMAX-HO-SVC-CLASS = 0x02 Motorola-WiMAX-DNS-Server-IP-Address = 0x71c2250421c22522 Motorola-WiMAX-Service-Flows = "2|Default" Motorola-WiMAX-VLAN-ID = 0x0111 Motorola-WiMAX-Maximum-Total-Bandwidth = 0x0000c3500000c350 Motorola-WiMAX-Maximum-Commit-Bandwidth = 0x0000c3500000c350 EAP-Message = 0x01a004051580000003fb160301004a0200004603014dc9bc07dbe88ec6106c4f128ef68386 473398aca2842adc3a4eaaee8614ce8e20779bcc1aa204f5d6e489f46ea6322950177f6a81a1 c45bde9741076dd5052144000900160301039e0b00039a0003970003943082039030820278a0 0302010202070100195ec9d00e300d06092a864886f70d0101050500307b310b300906035504 061302555331173015060355040a130e4d6f746f726f6c612c20496e632e312b302906035504 0b132257694d41582044657669636520436572746966696361746520417574686f7269747931 2630240603550403131d4d6f746f726f6c612057694d41582044 EAP-Message = 0x657669636520526f6f74204341301e170d3036303932383230353034335a170d3336303932 383230353034335a3072310b300906035504061302555331173015060355040a130e4d6f746f 726f6c612c20496e632e31153013060355040b130c57694d415820446576696365311c301a06 0355040b13134d6f746f726f6c6120504b492043656e746572311530130603550403130c3030 3139354543394430304530819f300d06092a864886f70d010101050003818d00308189028181 00e054813a6131a8ffa8212b75685f7e57c5e0f5194f33774b417b9d81178d7303e4983bf393 41386ccceac0cf3cd39da83ba27377b9dc3199edb43d4dd109d0 EAP-Message = 0x318893741855abca98290310bb50b41cc6e09d586c0ff98015f48ca02732b8f29f8e69661f 769e72690dcd3c71b1397a6cc235cbeff011123669c77eb24206171b0203010001a381a53081 a2300e0603551d0f0101ff0404030205a030200603551d250101ff0416301406082b06010505 07030206082b06010505070301301f0603551d23041830168014749ff62c2b6080531779a039 6d7784fdbad88865304d0603551d1f044630443042a040a03e863c687474703a2f2f7777772e 6174736563656e672e636f6d2f43524c2f4d6f746f57694d4158446576696365526f6f744341 2f6465766963652e63726c300d06092a864886f70d0101050500 EAP-Message = 0x038201010021be251ae9a0a1a428b5c9475eed95e4b5d9fc5493cd7ab2975a0344d39af891 9ace14bff5f39d2fb8aa235356d99e2b23d2ba1747cc383a2c4ae672c6ed98f8fce46043ff63 013ed19d6f6854c571ac22eb4725f45480b7983b93c8ee76114cad7ada64e32ae96ffc9b215f 68089bc11f2583194eee2d5dedb453868e9c688f3d48a0fbd2d5f0808c51b99e4967dc330200 8a2199c5bc2056ed2341140aff7389a2fdcbab3d5ce2ce9ce265cf1655263b9b8850c61b2199 fa4ac19fee01414de48b4b3955c213e4aa39571b2ff09713ae1a761e0b281d64f81e09ff8b65 fa47b39c54e0d8daf943c62040cc1ce13b950a4f340d4d918896 EAP-Message = 0xccf661e6b9980fdd16030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x797d6859978d85bd05c3d3563531b789 Tue May 10 12:28:23 2011 : Debug: Finished request 2 Tue May 10 12:28:23 2011 : Debug: Going to the next request Tue May 10 12:28:23 2011 : Debug: Waking up in 3 seconds... rad_recv: Access-Request packet from host 192.168.1.111:33102, id=188, length=407 User-Name = "ABCDEFGHIJKL" Calling-Station-Id = "\000\037\373"\214@" NAS-IP-Address = 192.168.1.111 State = 0x797d6859978d85bd05c3d3563531b789 NAS-Port = 1 Framed-MTU = 1400 Service-Type = Framed-User Called-Station-Id = "000084800711" NAS-Identifier = "636170632D73632D70726F64" NAS-Port-Type = 27 Attr-89 = 0x00 NWG-WiMAX-Capability = 0x000106312e3000020301 NWG-GMT-Time-Zone-Offset = 0x0000000000 NWG-BS-ID = 0x00000084800711 NWG-NSP-ID = 0x000001f9 EAP-Message = 0x02a000c41500160301008610000082008023d40d3c7050fd4d414fd95cc39d8a810fdc5b69 7b964512b3d1e1fee2c67bef3a77995ae8276347a07162e17fef80092e3ae3f6a9a33af95c79 0e37a01c4648e2702a16b3c72f778f21488658fa2fd9d6e013da3d0fb15654c9df9f1d8ade55 c0d94c8d05a022c2509602e93cfc688ecbb9c4ef5e622b4f8c14c356dcd6eef4140301000101 1603010028721f3b5868dd99ea3a9d91dc70f8da97cf8c817432503dce2b7a147446b932dd2d 96d683b9ce6ae0 Message-Authenticator = 0xb83011d6deee1bc5a068aca1cf7d3401 Sending Access-Challenge of id 188 to 192.168.1.111 port 33102 Session-Timeout = 64800 NWG-AAA-Session-Id = 0x00000001 Motorola-WiMAX-Convergence-Sublayer = 0x00 Motorola-WiMAX-Network-Domain-Name = "wimax.test" Motorola-WiMAX-EMS-Address = 10.10.10.1 Motorola-WiMAX-NTP-Server = 0x0171c54402 Motorola-WiMAX-HO-SVC-CLASS = 0x02 Motorola-WiMAX-DNS-Server-IP-Address = 0x71c2250421c22522 Motorola-WiMAX-Service-Flows = "2|Default" Motorola-WiMAX-VLAN-ID = 0x0111 Motorola-WiMAX-Maximum-Total-Bandwidth = 0x0000c3500000c350 Motorola-WiMAX-Maximum-Commit-Bandwidth = 0x0000c3500000c350 EAP-Message = 0x01a1003d1580000000331403010001011603010028c4fc69856441301a816285f1754f1b17 c76dce7f6a0452fc56f9975a51aa58b6babbf545b2c8b4a4 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xa131f428a180d28e0d94a607853650a7 rad_recv: Access-Request packet from host 192.168.1.111:33102, id=189, length=358 User-Name = "ABCDEFGHIJKL" Calling-Station-Id = "\000\037\373"\214@" NAS-IP-Address = 192.168.1.111 State = 0xa131f428a180d28e0d94a607853650a7 NAS-Port = 1 Framed-MTU = 1400 Service-Type = Framed-User Called-Station-Id = "000084800711" NAS-Identifier = "636170632D73632D70726F64" NAS-Port-Type = 27 Attr-89 = 0x00 NWG-WiMAX-Capability = 0x000106312e3000020301 NWG-GMT-Time-Zone-Offset = 0x0000000000 NWG-BS-ID = 0x00000084800711 NWG-NSP-ID = 0x000001f9 EAP-Message = 0x02a10093150017030100886f506af88817f95f825287a053de88848946a8e8d5e919f0742d 42a8e8f7726d8d45374503e98fe12c9bba9a574e97b9e78018a011894d17ea6bb64913009155 6fb3f810250bdf0deac74be2ea6bfe7957284df32385b135cab5ab624f39f08ee91ae5f266e4 a5e0af9e032575bdd0ff182c8ceb229b331bf833b6b83cb50e77e148c0eceed741fa Message-Authenticator = 0x682093618c0d9a0717464733d93bcafb Sending Access-Challenge of id 189 to 192.168.1.111 port 33102 Session-Timeout = 64800 NWG-AAA-Session-Id = 0x00000001 Motorola-WiMAX-Convergence-Sublayer = 0x00 Motorola-WiMAX-Network-Domain-Name = "wimax.test" Motorola-WiMAX-EMS-Address = 10.10.10.1 Motorola-WiMAX-NTP-Server = 0x0171c54402 Motorola-WiMAX-HO-SVC-CLASS = 0x02 Motorola-WiMAX-DNS-Server-IP-Address = 0x71c2250421c22522 Motorola-WiMAX-Service-Flows = "2|Default" Motorola-WiMAX-VLAN-ID = 0x0111 Motorola-WiMAX-Maximum-Total-Bandwidth = 0x0000c3500000c350 Motorola-WiMAX-Maximum-Commit-Bandwidth = 0x0000c3500000c350 EAP-Message = 0x01a2005f1580000000551703010050ebd22c76d84467560a7c9ec2d14f85378b6a0198e137 820df6d48e338ae7df4e01ac57ee64ca1d63e8841c093bd8df4812b2309ee039a4e9402a595c 7363d31d58c17b61c20b49fab7182f38a5529517 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xbfb482684b5f736f6a4520780d45024c Tue May 10 12:28:23 2011 : Debug: Finished request 4 Tue May 10 12:28:23 2011 : Debug: Going to the next request Tue May 10 12:28:23 2011 : Debug: Waking up in 3 seconds... rad_recv: Access-Request packet from host 192.168.1.111:33102, id=190, length=217 User-Name = "ABCDEFGHIJKL" Calling-Station-Id = "\000\037\373"\214@" NAS-IP-Address = 192.168.1.111 State = 0xbfb482684b5f736f6a4520780d45024c NAS-Port = 1 Framed-MTU = 1400 Service-Type = Framed-User Called-Station-Id = "000084800711" NAS-Identifier = "636170632D73632D70726F64" NAS-Port-Type = 27 Attr-89 = 0x00 NWG-WiMAX-Capability = 0x000106312e3000020301 NWG-GMT-Time-Zone-Offset = 0x0000000000 NWG-BS-ID = 0x00000084800711 NWG-NSP-ID = 0x000001f9 EAP-Message = 0x02a200061500 Message-Authenticator = 0x01a65022fbcbf916e7db8a9aec5d11d6 Sending Access-Accept of id 190 to 192.168.1.111 port 33102 Session-Timeout = 64800 NWG-AAA-Session-Id = 0x00000001 Motorola-WiMAX-Convergence-Sublayer = 0x00 Motorola-WiMAX-Network-Domain-Name = "wimax.test" Motorola-WiMAX-EMS-Address = 10.10.10.1 Motorola-WiMAX-NTP-Server = 0x0171c54402 Motorola-WiMAX-HO-SVC-CLASS = 0x02 Motorola-WiMAX-DNS-Server-IP-Address = 0x71c2250421c22522 Motorola-WiMAX-Service-Flows = "2|Default" Motorola-WiMAX-VLAN-ID = 0x0111 Motorola-WiMAX-Maximum-Total-Bandwidth = 0x0000c3500000c350 Motorola-WiMAX-Maximum-Commit-Bandwidth = 0x0000c3500000c350 MS-MPPE-Recv-Key = 0xac420687cf25af1258037359ed46a9fb206ef03923fd295b058d7b7bb057bcc3 MS-MPPE-Send-Key = 0x53c8e311cf376e6d6482197c2c000c48cc09232f9c3ef821f2b393322da32db2 EAP-Message = 0x03a20004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = "ABCDEFGHIJKL" FREERADIUS 2: ACCESS ACCEPT MESSAGE NOK, Missing attributes rad_recv: Access-Request packet from host 192.168.1.111 port 33096, id=169, length=210 User-Name = "ABCDEFGHIJKL" Calling-Station-Id = "\000\037\373\"\214@" NAS-IP-Address = 192.168.1.111 NAS-Port = 1 Framed-MTU = 1400 Service-Type = Framed-User Called-Station-Id = "000084800711" NAS-Identifier = "636170632D73632D70726F64" NAS-Port-Type = 27 Chargeable-User-Identity = "" NWG-WiMAX-Capability = 0x000106312e3000020301 NWG-GMT-Time-Zone-Offset = 0x0000000000 NWG-BS-ID = 0x00000084800711 NWG-NSP-ID = 0x000001f9 EAP-Message = 0x0289001101423836313646303044333437 Message-Authenticator = 0x9f9f3cbb6a2b7487bfa5feba9e7191e9 Sending Access-Challenge of id 169 to 192.168.1.111 port 33096 Session-Timeout = 64800 NWG-AAA-Session-Id = 0x00000001 Motorola-WiMAX-Convergence-Sublayer = 0x00 Motorola-WiMAX-Network-Domain-Name = "wimax.test" Motorola-WiMAX-EMS-Address = 10.10.10.1 Motorola-WiMAX-NTP-Server = 0x0171c54402 Motorola-WiMAX-HO-SVC-CLASS = 0x02 Motorola-WiMAX-DNS-Server-IP-Address = 0x71c2250421c22522 Motorola-WiMAX-Service-Flows = "2|Default" Motorola-WiMAX-VLAN-ID = 0x0111 Motorola-WiMAX-Maximum-Total-Bandwidth = 0x0000c3500000c350 Motorola-WiMAX-Maximum-Commit-Bandwidth = 0x0000c3500000c350 EAP-Message = 0x018a00060d20 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x1f1aab301f90a699efb30c2336a4a7f8 rad_recv: Access-Request packet from host 192.168.1.111 port 33096, id=170, length=217 User-Name = "ABCDEFGHIJKL" Calling-Station-Id = "\000\037\373\"\214@" NAS-IP-Address = 192.168.1.111 State = 0x1f1aab301f90a699efb30c2336a4a7f8 NAS-Port = 1 Framed-MTU = 1400 Service-Type = Framed-User Called-Station-Id = "000084800711" NAS-Identifier = "636170632D73632D70726F64" NAS-Port-Type = 27 Chargeable-User-Identity = "" NWG-WiMAX-Capability = 0x000106312e3000020301 NWG-GMT-Time-Zone-Offset = 0x0000000000 NWG-BS-ID = 0x00000084800711 NWG-NSP-ID = 0x000001f9 EAP-Message = 0x028a00060315 Message-Authenticator = 0x9bfe543a80d2b666c535ecec4716540c Sending Access-Challenge of id 170 to 192.168.1.111 port 33096 Session-Timeout = 64800 NWG-AAA-Session-Id = 0x00000001 Motorola-WiMAX-Convergence-Sublayer = 0x00 Motorola-WiMAX-Network-Domain-Name = "wimax.test" Motorola-WiMAX-EMS-Address = 10.10.10.1 Motorola-WiMAX-NTP-Server = 0x0171c54402 Motorola-WiMAX-HO-SVC-CLASS = 0x02 Motorola-WiMAX-DNS-Server-IP-Address = 0x71c2250421c22522 Motorola-WiMAX-Service-Flows = "2|Default" Motorola-WiMAX-VLAN-ID = 0x0111 Motorola-WiMAX-Maximum-Total-Bandwidth = 0x0000c3500000c350 Motorola-WiMAX-Maximum-Commit-Bandwidth = 0x0000c3500000c350 EAP-Message = 0x018b00061520 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x1f1aab301e91be99efb30c2336a4a7f8 rad_recv: Access-Request packet from host 192.168.1.111 port 33096, id=171, length=291 User-Name = "ABCDEFGHIJKL" Calling-Station-Id = "\000\037\373\"\214@" NAS-IP-Address = 192.168.1.111 State = 0x1f1aab301e91be99efb30c2336a4a7f8 NAS-Port = 1 Framed-MTU = 1400 Service-Type = Framed-User Called-Station-Id = "000084800711" NAS-Identifier = "636170632D73632D70726F64" NAS-Port-Type = 27 Chargeable-User-Identity = "" NWG-WiMAX-Capability = 0x000106312e3000020301 NWG-GMT-Time-Zone-Offset = 0x0000000000 NWG-BS-ID = 0x00000084800711 NWG-NSP-ID = 0x000001f9 EAP-Message = 0x028b0050150016030100450100004103010fc6de0dabfd728862b435215018375f0925555c a0c3841817c989017b4e208a00001a0015001600330009000a002f000700670039006b003c00 35003d0100 Message-Authenticator = 0xe8a191b0ed61fc61e1d2ef3bdaf83cc3 Tue May 10 12:32:06 2011 : Debug: rlm_wimax: Fixing WiMAX binary Calling-Station-Id to 00-1f-fb-22-8c-40 Tue May 10 12:32:06 2011 : Info: ++[wimax] returns ok Tue May 10 12:32:06 2011 : Info: [suffix] No '@' in User-Name = "ABCDEFGHIJKL", looking up realm NULL Tue May 10 12:32:06 2011 : Info: [eap] Request found, released from the list Tue May 10 12:32:06 2011 : Info: [eap] EAP/ttls Tue May 10 12:32:06 2011 : Info: [eap] processing type ttls Tue May 10 12:32:06 2011 : Info: [ttls] Authenticate Tue May 10 12:32:06 2011 : Info: [ttls] processing EAP-TLS Tue May 10 12:32:06 2011 : Info: [ttls] eaptls_verify returned 7 Tue May 10 12:32:06 2011 : Info: [ttls] Done initial handshake Tue May 10 12:32:06 2011 : Info: [ttls] (other): before/accept initialization Tue May 10 12:32:07 2011 : Info: [ttls] TLS_accept: before/accept initialization Tue May 10 12:32:07 2011 : Info: [ttls] <<< TLS 1.0 Handshake [length 0045], ClientHello Tue May 10 12:32:07 2011 : Info: [ttls] TLS_accept: SSLv3 read client hello A Tue May 10 12:32:07 2011 : Info: [ttls] >>> TLS 1.0 Handshake [length 002a], ServerHello Tue May 10 12:32:07 2011 : Info: [ttls] TLS_accept: SSLv3 write server hello A Tue May 10 12:32:07 2011 : Info: [ttls] >>> TLS 1.0 Handshake [length 07a4], Certificate Tue May 10 12:32:07 2011 : Info: [ttls] TLS_accept: SSLv3 write certificate A Tue May 10 12:32:07 2011 : Info: [ttls] >>> TLS 1.0 Handshake [length 018d], ServerKeyExchange Tue May 10 12:32:07 2011 : Info: [ttls] TLS_accept: SSLv3 write key exchange A Tue May 10 12:32:07 2011 : Info: [ttls] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone Tue May 10 12:32:07 2011 : Info: [ttls] TLS_accept: SSLv3 write server done A Tue May 10 12:32:07 2011 : Info: [ttls] TLS_accept: SSLv3 flush data Tue May 10 12:32:07 2011 : Info: [ttls] TLS_accept: Need to read more data: SSLv3 read client certificate A Tue May 10 12:32:07 2011 : Debug: In SSL Handshake Phase Tue May 10 12:32:07 2011 : Debug: In SSL Accept mode Tue May 10 12:32:07 2011 : Info: [ttls] eaptls_process returned 13 Tue May 10 12:32:07 2011 : Info: ++[eap] returns handled Sending Access-Challenge of id 171 to 192.168.1.111 port 33096 EAP-Message = 0x018c057415c000000973160301002a0200002603014dc9bce7d40cda888a43688210a00314 9c994d366a65124da0269c9e686e5c220000150016030107a40b0007a000079d0003c9308203 c53082032ea003020102020102300d06092a864886f70d01010505003081a5310b3009060355 04061302504631193017060355040813104672656e636820506f6c796e65736961310f300d06 035504071306546168697469310d300b060355040a13045669546931253023060355040b131c 566954692043657274696669636174696f6e20417574686f726974793110300e060355040313 07566954692043413122302006092a864886f70d010901161373 EAP-Message = 0x75706572766973696f6e40766974692e7066301e170d3131303531303139303630305a170d 3231303531303139303530305a3081a4310b3009060355040613025046311930170603550408 13104672656e636820506f6c796e65736961310f300d06035504071306546168697469310d30 0b060355040a1304566954693120301e060355040b1317566954692044657669636520436572 7469666963617465311430120603550403130b56695469204465766963653122302006092a86 4886f70d01090116137375706572766973696f6e40766974692e706630819f300d06092a8648 86f70d010101050003818d0030818902818100cf146e3aec377c EAP-Message = 0xf2e1bec0453263b1b4127e0027a8adb9c3b4ccef2b8d855c0f961a7a25d10150dd7a33aa19 1576f0f33d2caf6645138cc5e8746320af632696db3a13daccc1a48eae75162b2eba2a9458a5 4d005203f2c70380c3be402b08118a92bee2c0325459cd31e666bd160a5d479adaaa079aa683 ae42ce4f5d05c9210203010001a38201023081ff30090603551d1304023000301d0603551d0e 04160414a4c6acab08366f6bb61fd9b8a4ed15b92112846c3081d20603551d230481ca3081c7 80148e5db1d2720ee7812a816ef4617fab6a05fbe5cda181aba481a83081a5310b3009060355 04061302504631193017060355040813104672656e636820506f EAP-Message = 0x6c796e65736961310f300d06035504071306546168697469310d300b060355040a13045669 546931253023060355040b131c566954692043657274696669636174696f6e20417574686f72 6974793110300e06035504031307566954692043413122302006092a864886f70d0109011613 7375706572766973696f6e40766974692e7066820101300d06092a864886f70d010105050003 8181005851ca7ba587bbd42a7be05bb08e6b5498828d647ea5dde26637c7534f7744aa6b4f66 d4b74d32445c14cf62aa98ee96d0ba6315eddbbfa2aa53d572c42cfa9a833f527082a874beae 39d5afce6a81c86b2538ddabb7186f2bd1ed3dc041b15a15387b EAP-Message = 0xeb64a2f8b9f7eb4f88196b08bea65dd215b15c8257c7164f86f99298190003ce308203ca30 820333a003020102020101300d06092a864886f70d01010505003081a5310b30090603550406 1302504631193017060355040813104672656e636820506f6c796e65736961310f300d060355 04071306546168697469310d300b060355040a13045669546931253023060355040b131c5669 54692043657274696669636174696f6e20417574686f726974793110300e0603550403130756 6954692043413122302006092a864886f70d01090116137375706572766973696f6e40766974 692e7066301e170d3131303531303139303530305a170d323130 EAP-Message = 0x3531303139303530305a3081a5310b30090603550406130250463119301706035504081310 4672656e636820506f6c796e65736961310f300d06035504071306546168697469310d300b06 0355040a13045669546931253023060355040b131c566954692043657274696669636174696f 6e20417574686f726974793110300e060355 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x1f1aab301d96be99efb30c2336a4a7f8 rad_recv: Access-Request packet from host 192.168.1.111 port 33096, id=172, length=217 User-Name = "ABCDEFGHIJKL" Calling-Station-Id = "\000\037\373\"\214@" NAS-IP-Address = 192.168.1.111 State = 0x1f1aab301d96be99efb30c2336a4a7f8 NAS-Port = 1 Framed-MTU = 1400 Service-Type = Framed-User Called-Station-Id = "000084800711" NAS-Identifier = "636170632D73632D70726F64" NAS-Port-Type = 27 Chargeable-User-Identity = "" NWG-WiMAX-Capability = 0x000106312e3000020301 NWG-GMT-Time-Zone-Offset = 0x0000000000 NWG-BS-ID = 0x00000084800711 NWG-NSP-ID = 0x000001f9 EAP-Message = 0x028c00061500 Message-Authenticator = 0x4feb13773e367f2f9bb82e5476b30c4e Tue May 10 12:32:07 2011 : Info: [eap] EAP/ttls Tue May 10 12:32:07 2011 : Info: [eap] processing type ttls Tue May 10 12:32:07 2011 : Info: [ttls] Authenticate Tue May 10 12:32:07 2011 : Info: [ttls] processing EAP-TLS Tue May 10 12:32:07 2011 : Info: [ttls] Received TLS ACK Tue May 10 12:32:07 2011 : Info: [ttls] ACK handshake fragment handler Tue May 10 12:32:07 2011 : Info: [ttls] eaptls_verify returned 1 Tue May 10 12:32:07 2011 : Info: [ttls] eaptls_process returned 13 Tue May 10 12:32:07 2011 : Info: ++[eap] returns handled Sending Access-Challenge of id 172 to 192.168.1.111 port 33096 EAP-Message = 0x018d041315800000097304031307566954692043413122302006092a864886f70d01090116 137375706572766973696f6e40766974692e706630819f300d06092a864886f70d0101010500 03818d0030818902818100b7ac51ec399b15d7cf0643216d5306d93aa4452657d7fbe44d1fa3 1af4075d73a4a3a35ef85ae05c447ffa77af62936416062468c17c15786ae6ee8550515693f0 c7f65607bf195f36099fe3d109055734f0ed3cff4aee4dc47f151985ba949b3f5a3777cae7b0 524d668f2037ebba783780f2713dadbf11a705f98de8c0a21b0203010001a382010630820102 300c0603551d13040530030101ff301d0603551d0e041604148e EAP-Message = 0x5db1d2720ee7812a816ef4617fab6a05fbe5cd3081d20603551d230481ca3081c780148e5d b1d2720ee7812a816ef4617fab6a05fbe5cda181aba481a83081a5310b300906035504061302 504631193017060355040813104672656e636820506f6c796e65736961310f300d0603550407 1306546168697469310d300b060355040a13045669546931253023060355040b131c56695469 2043657274696669636174696f6e20417574686f726974793110300e06035504031307566954 692043413122302006092a864886f70d01090116137375706572766973696f6e40766974692e 7066820101300d06092a864886f70d01010505000381810090c8 EAP-Message = 0x0c65f81c8ceb5b62904cff1b80456c04f697c3adc26a164949a51dfdfdd3edc5f3533a9c66 f49823621c06ba4a3b336f79bb2359cf9f141a1f56d32461dc5b035ccdf96bcc0f9a8a16f59b 6fe8ad12eb5e52d2f0e801a502b003623d3e58a857cdff666ab7109ba20d97374cf24605ba50 4399f3fa0aa349a78d2690c75e160301018d0c000189008096c63659641fe69224a150344e09 f5640eff816b755ed2919b4abdd624f52b357de4d8eed363296dec7f49cab77e5d3fa71100a6 31ea006653da6da4b01b5ef0a8716ac1f8358a78d24862c2b79390e0e94a8e31c4192197b95f eaa631910015d7494823fa06817313a5f9e7cb46982abc4a59a1 EAP-Message = 0x98eb701ea03966bc5233a08300010200803b555aa3c5417163d1d890a41131b06ad88dfef4 9ffd1fc3c2547845112efce1b818a21b6ed46bad7ae412cd100a23b10162c372ec7f618dbd1f 50812450f4b60addefc8fb2698a27fbbc5abdc1a5eb137aec15bdccd596b1d52d1d69ef9f206 4f0be3de750413eb6508f19c8e2cf4807f57e1e3aaef4232d1c4f5f6450e6c980080ae642d91 204dc58bcf2de45a3a2dcc1a92ffcdfeb5d9bc1832e969528b42b5b0b12350a995e1219874f5 0717be1cb7f42f4d7a664134d1a479e34ae3ee7f0136dff6b37edc3021ad865783e0a868f23b 2ffcee78f99b32d2d4f16db950159c29964d51711b82826258d9 EAP-Message = 0xbd4a4e36d91b7047288f4f78254763134f61152f942816030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x1f1aab301c97be99efb30c2336a4a7f8 rad_recv: Access-Request packet from host 192.168.1.111 port 33096, id=173, length=407 User-Name = "ABCDEFGHIJKL" Calling-Station-Id = "\000\037\373\"\214@" NAS-IP-Address = 192.168.1.111 State = 0x1f1aab301c97be99efb30c2336a4a7f8 NAS-Port = 1 Framed-MTU = 1400 Service-Type = Framed-User Called-Station-Id = "000084800711" NAS-Identifier = "636170632D73632D70726F64" NAS-Port-Type = 27 Chargeable-User-Identity = "" NWG-WiMAX-Capability = 0x000106312e3000020301 NWG-GMT-Time-Zone-Offset = 0x0000000000 NWG-BS-ID = 0x00000084800711 NWG-NSP-ID = 0x000001f9 EAP-Message = 0x028d00c415001603010086100000820080041043d5921043658e7021b4dc0c4766668c5254 518f4c66ef3aee6c5b050bd710b8a99b4d2efed361a5aee69673ee2f497ea993705b8ca5c95a b86e00d96882a9e249b225b91bf7ce5ed734164ac29e17fc55de89e345444bd241a875e22d4c 51b6fb7318e376938005ed77138d2836b648a59c38cb0ebd681998473d06ad57140301000101 1603010028fb9cb199122793285220fa9435f91dfe2c8106081c1761645cde53593aa9bc0104 ebccc13f74afee Message-Authenticator = 0x72753965c681bd3edfb36ef6b39909ae Tue May 10 12:32:07 2011 : Info: +- entering group authorize {...} Tue May 10 12:32:07 2011 : Info: ++[preprocess] returns ok Tue May 10 12:32:07 2011 : Info: [auth_log] expand: %t -> Tue May 10 12:32:07 2011 Tue May 10 12:32:07 2011 : Info: ++[auth_log] returns ok Tue May 10 12:32:07 2011 : Info: ++[chap] returns noop Tue May 10 12:32:07 2011 : Info: ++[mschap] returns noop Tue May 10 12:32:07 2011 : Debug: rlm_wimax: Fixing WiMAX binary Calling-Station-Id to 00-1f-fb-22-8c-40 Tue May 10 12:32:07 2011 : Info: ++[wimax] returns ok Tue May 10 12:32:07 2011 : Info: [eap] EAP/ttls Tue May 10 12:32:07 2011 : Info: [eap] processing type ttls Tue May 10 12:32:07 2011 : Info: [ttls] Authenticate Tue May 10 12:32:07 2011 : Info: [ttls] processing EAP-TLS Tue May 10 12:32:07 2011 : Info: [ttls] eaptls_verify returned 7 Tue May 10 12:32:07 2011 : Info: [ttls] Done initial handshake Tue May 10 12:32:07 2011 : Info: [ttls] <<< TLS 1.0 Handshake [length 0086], ClientKeyExchange Tue May 10 12:32:07 2011 : Info: [ttls] TLS_accept: SSLv3 read client key exchange A Tue May 10 12:32:07 2011 : Info: [ttls] <<< TLS 1.0 ChangeCipherSpec [length 0001] Tue May 10 12:32:07 2011 : Info: [ttls] <<< TLS 1.0 Handshake [length 0010], Finished Tue May 10 12:32:07 2011 : Info: [ttls] TLS_accept: SSLv3 read finished A Tue May 10 12:32:07 2011 : Info: [ttls] >>> TLS 1.0 ChangeCipherSpec [length 0001] Tue May 10 12:32:07 2011 : Info: [ttls] TLS_accept: SSLv3 write change cipher spec A Tue May 10 12:32:07 2011 : Info: [ttls] >>> TLS 1.0 Handshake [length 0010], Finished Tue May 10 12:32:07 2011 : Info: [ttls] TLS_accept: SSLv3 write finished A Tue May 10 12:32:07 2011 : Info: [ttls] TLS_accept: SSLv3 flush data Tue May 10 12:32:07 2011 : Info: [ttls] (other): SSL negotiation finished successfully Tue May 10 12:32:07 2011 : Debug: SSL Connection Established Tue May 10 12:32:07 2011 : Info: [ttls] eaptls_process returned 13 Tue May 10 12:32:07 2011 : Info: ++[eap] returns handled Sending Access-Challenge of id 173 to 192.168.1.111 port 33096 EAP-Message = 0x018e003d158000000033140301000101160301002836597205ba27c7eb6f6c282853dfcd01 b4a82000561ad791379a623c527aabadff705be58f4392b9 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x1f1aab301b94be99efb30c2336a4a7f8 rad_recv: Access-Request packet from host 192.168.1.111 port 33096, id=174, length=358 User-Name = "ABCDEFGHIJKL" Calling-Station-Id = "\000\037\373\"\214@" NAS-IP-Address = 192.168.1.111 State = 0x1f1aab301b94be99efb30c2336a4a7f8 NAS-Port = 1 Framed-MTU = 1400 Service-Type = Framed-User Called-Station-Id = "000084800711" NAS-Identifier = "636170632D73632D70726F64" NAS-Port-Type = 27 Chargeable-User-Identity = "" NWG-WiMAX-Capability = 0x000106312e3000020301 NWG-GMT-Time-Zone-Offset = 0x0000000000 NWG-BS-ID = 0x00000084800711 NWG-NSP-ID = 0x000001f9 EAP-Message = 0x028e0093150017030100880c7f64a5f5184085fb897a83be464d3c99883f7949f8c30d76e7 09e44c3154dcd14dbdcc0f76ef33368959613f398b868bf96f797187b9edcc0a280b20994284 6660822fd2efa60ea39da6ada99dc8ce28cc7caaaaa26fd10308af7fbf16d1421e4cda944739 bddeb2474188f0017d24ec3f657301733ddd1229c0a031a2462ee9cfc5f67e2d0df5 Message-Authenticator = 0x0f0f1ba3f356aa9b52e19c3f338f57f9 Tue May 10 12:32:07 2011 : Debug: rlm_wimax: Fixing WiMAX binary Calling-Station-Id to 00-1f-fb-22-8c-40 Tue May 10 12:32:07 2011 : Info: ++[wimax] returns ok Tue May 10 12:32:07 2011 : Info: [suffix] No '@' in User-Name = "ABCDEFGHIJKL", looking up realm NULL Tue May 10 12:32:07 2011 : Info: [eap] EAP/ttls Tue May 10 12:32:07 2011 : Info: [eap] processing type ttls Tue May 10 12:32:07 2011 : Info: [ttls] Authenticate Tue May 10 12:32:07 2011 : Info: [ttls] processing EAP-TLS Tue May 10 12:32:07 2011 : Info: [ttls] eaptls_verify returned 7 Tue May 10 12:32:07 2011 : Info: [ttls] Done initial handshake Tue May 10 12:32:07 2011 : Info: [ttls] eaptls_process returned 7 Tue May 10 12:32:07 2011 : Info: [ttls] Session established. Proceeding to decode tunneled attributes. Tue May 10 12:32:07 2011 : Info: [ttls] Got tunneled request User-Name = "usertest" MS-CHAP-Challenge = 0x4f40452a49e66f3394fe5472d7a6c8a3 MS-CHAP2-Response = 0x730014ff97bffc0a475fbe7d800f95b76e9e00000000000000008873ec5c5e2f2abe748678 133c983a865c80980b3b532e24 FreeRADIUS-Proxied-To = 127.0.0.1 Tue May 10 12:32:07 2011 : Info: [ttls] Sending tunneled request User-Name = "usertest" MS-CHAP-Challenge = 0x4f40452a49e66f3394fe5472d7a6c8a3 MS-CHAP2-Response = 0x730014ff97bffc0a475fbe7d800f95b76e9e00000000000000008873ec5c5e2f2abe748678 133c983a865c80980b3b532e24 FreeRADIUS-Proxied-To = 127.0.0.1 server inner-tunnel { Tue May 10 12:32:07 2011 : Info: [mschap] Told to do MS-CHAPv2 for usertest with NT-Password Tue May 10 12:32:07 2011 : Info: [mschap] adding MS-CHAPv2 MPPE keys Tue May 10 12:32:07 2011 : Info: ++[mschap] returns ok Tue May 10 12:32:07 2011 : Info: WARNING: Empty section. Using default return values. } # server inner-tunnel Tue May 10 12:32:07 2011 : Info: [ttls] Got tunneled reply code 2 MS-CHAP2-Success = 0x73533d45434435323936393145304539454433384342423831354245354644433446384631 384533454139 MS-MPPE-Recv-Key = 0x2dacf31b4e71f823de59fbab96d683d3 MS-MPPE-Send-Key = 0x4e126126cbeee506002c7e8b418b7c37 MS-MPPE-Encryption-Policy = 0x00000001 MS-MPPE-Encryption-Types = 0x00000006 Tue May 10 12:32:07 2011 : Info: [ttls] Got tunneled Access-Accept Tue May 10 12:32:07 2011 : Info: [ttls] Got MS-CHAP2-Success, tunneling it to the client in a challenge. Tue May 10 12:32:07 2011 : Info: ++[eap] returns handled Sending Access-Challenge of id 174 to 192.168.1.111 port 33096 EAP-Message = 0x018f005f1580000000551703010050a7dd22c4c960fac1b93edcce9e2caa6bc6cd1c3daf00 b30b64cb7ca999bac133b6bf01f33f00c8848a60de395ec93a2abaa09cd35fbaaf4e357c8cd1 4ab7e499121d53cb61cd60ad8e4efc534b0a1b5b Message-Authenticator = 0x00000000000000000000000000000000 State = 0x1f1aab301a95be99efb30c2336a4a7f8 Tue May 10 12:32:07 2011 : Info: Finished request 8. Tue May 10 12:32:07 2011 : Debug: Going to the next request Tue May 10 12:32:07 2011 : Debug: Waking up in 1.3 seconds. rad_recv: Access-Request packet from host 192.168.1.111 port 33096, id=175, length=217 User-Name = "ABCDEFGHIJKL" Calling-Station-Id = "\000\037\373\"\214@" NAS-IP-Address = 192.168.1.111 State = 0x1f1aab301a95be99efb30c2336a4a7f8 NAS-Port = 1 Framed-MTU = 1400 Service-Type = Framed-User Called-Station-Id = "000084800711" NAS-Identifier = "636170632D73632D70726F64" NAS-Port-Type = 27 Chargeable-User-Identity = "" NWG-WiMAX-Capability = 0x000106312e3000020301 NWG-GMT-Time-Zone-Offset = 0x0000000000 NWG-BS-ID = 0x00000084800711 NWG-NSP-ID = 0x000001f9 EAP-Message = 0x028f00061500 Message-Authenticator = 0x39b7c4e6f117eeb2972893b5de5fa739 Tue May 10 12:32:07 2011 : Info: +- entering group authorize {...} Tue May 10 12:32:07 2011 : Info: ++[preprocess] returns ok Tue May 10 12:32:07 2011 : Info: ++[chap] returns noop Tue May 10 12:32:07 2011 : Info: ++[mschap] returns noop Tue May 10 12:32:07 2011 : Debug: rlm_wimax: Fixing WiMAX binary Calling-Station-Id to 00-1f-fb-22-8c-40 Tue May 10 12:32:07 2011 : Info: ++[wimax] returns ok Tue May 10 12:32:07 2011 : Info: [eap] Freeing handler Tue May 10 12:32:07 2011 : Info: ++[eap] returns ok Tue May 10 12:32:07 2011 : Info: [wimax] MIP-RK = 0xb53187ac09a8638b39ccece5d545ddcddfe9039dd4ca0d87fbfb11eb8d28bfed72fd0b846c b227a4bfef736b776521f1f9f65399d97663622de78645392e829a Tue May 10 12:32:07 2011 : Info: [wimax] MIP-SPI = c3962fc7 Tue May 10 12:32:07 2011 : Info: [wimax] WARNING: WiMAX-MN-NAI was not found in the request or in the reply. Tue May 10 12:32:07 2011 : Info: [wimax] WARNING: We cannot calculate MN-HA keys. Tue May 10 12:32:07 2011 : Info: [wimax] WARNING: WiMAX-IP-Technology not found in reply. Tue May 10 12:32:07 2011 : Info: [wimax] WARNING: Not calculating MN-HA keys Tue May 10 12:32:07 2011 : Info: ++[wimax] returns updated Sending Access-Accept of id 175 to 192.168.1.111 port 33096 MS-MPPE-Recv-Key = 0x6ac20e0ae330ec47259e11c1c88604adaf0bf8b2fed16dcd36676a114f989c50 MS-MPPE-Send-Key = 0x6c6881e76c18bae61afc53895744ccee92b7c95acc83cff8f59fcad428930e68 EAP-Message = 0x038f0004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = "ABCDEFGHIJKL" If you have some clues please let me know. Regards,

2 1

different LDAP settings for each client/site
by Herbert Fischer 13 May '11

13 May '11

Hi, I would like to setup LDAP module with different settings for different clients. How can I do this? Can I setup multiple LDAP module settings and specify which one I would like to use for a site or client? Can I define some of the LDAP settings inside the site or client config? thanks, Herbert

3 5

MSCHAP / NTLM_AUTH failure on "expired" AD password; out of sync cached creds / AD password.
by Gary Gatten 13 May '11

13 May '11

Hello, We're struggling with Windows 7 and PEAP/MSCHAP auth.. There are several scenarios where ones AD password will expire. FR is configured to send the auth request to AD (MSCHAP only, Aruba terminates PEAP) using NTLM_AUTH. If the password is not expired everything works great. If it IS expired, MSCHAP (or NTLM_AUTH) "seems" to always return a reject. Now, users should NOT allow their password to expire - but we all know it happens. Also, with new users an account is created with a temp / one time password and their account is set to "user must change password at first logon". This results in a similar failure - the supplicant never pops a box prompting to CHANGE password, it just prompts to reenter because of the failure - which is obviously worthless. I THOUGHT MSCHAPv2 can recognize a "password expired" state and actually allow a user to change it via MSCHAPv2 functions. Is this not correct, or are there settings in AD or the ntlm_auth/samba I need to tweak? Or should I be using LDAP? And will it work at all using a "basic" MS supplicant, or do I need a third party one that handles this better? We have a similar failure when the laptops "cached credentials" are out of sync with AD. Ie, the user changed their AD password using their desktop on Friday. Monday AM they bring in their laptop and try to login. Well, it's not "connected" to the domain, so they enter their old password just to get access to their laptop. So far so good, until the supplicant (which is configured to "use my windows login info" ) grabs the old password and tries to auth - which of course fails because it's the old (now incorrect) password. There seems to be some bug with Windows 7, because it WILL pop a box to allow the user to manually enter a password, but even when the new / correct password is entered - MSCHAP/NTLM_AUTH STILL fails. It's as if even though Windows 7 pops the box and allows one to enter a different password, it ignores it and ALWAYS uses the windows login credentials - which are invalid. FWIW: if we REQUIRE the user to ALWAYS enter their credentials (don't try to use windows) I THINK everything works OK, BUT the powers that be say it's unacceptable for a user to have to login twice - once to "windows" and then again to the "network". My colleague has been messing with this for many hours to no avail. I've spent several hours myself trying various configs, googling, etc. Tomorrow I intend to take a more controlled / methodical approach to the testing scenarios and see what that may reveal. In the mean time any advice would be greatly appreciated. SURELY we're not the only ones to encounter this - it's a pretty common environment. I don't THINK the problem, or at least the same problem exist on XP - but I'm not 100% sure at this point. FR is 2.1.10 and Samba is 3.0.33-3.7.el5. I THINK our DC's are running 2003. Below are FR debugs for (3) auth attempts, (1) success and (2) failures... I expected the middle (2nd) request to fail, 'cause windows automatically tried using the old/wrong creds - but the last / 3rd attempt should have worked... TIA - Gary #Working rad_recv: Access-Request packet from host 1.1.2.4 port 33350, id=50, length=241 NAS-IP-Address = 1.1.2.4 NAS-Port = 0 NAS-Port-Type = Wireless-802.11 User-Name = "netengtest" Calling-Station-Id = "58946BB9F738" Called-Station-Id = "000B8661BF34" MS-CHAP-Challenge = 0x65f0e3833007ea3603cb7a74a97d905a MS-CHAP2-Response = 0x0600c3fb5dab7b3c82d77669020e64574a790000000000000000b656fe75b45fb03fcdb6cd0c1e7675da77b79296fb32e768 Service-Type = Login-User Aruba-Essid-Name = "Bob" Aruba-Location-Id = "00:24:6c:c3:43:d3" NAS-Identifier = "Aruba-WLAN-1" Message-Authenticator = 0x43ab558afb7057dd052430f8829bf0e1 # Executing section authorize from file /devel/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop [mschap] Found MS-CHAP attributes. Setting 'Auth-Type = mschap' ++[mschap] returns ok ++[digest] returns noop [suffix] No '@' in User-Name = "netengtest", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] No EAP-Message, not doing EAP ++[eap] returns noop ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = MSCHAP # Executing group from file /devel/sites-enabled/default +- entering group MS-CHAP {...} [mschap] Creating challenge hash with username: netengtest [mschap] Told to do MS-CHAPv2 for netengtest with NT-Password [mschap] expand: %{mschap:User-Name} -> netengtest [mschap] expand: --username=%{%{mschap:User-Name}:-%{User-Name:-None}} -> --username=netengtest [mschap] mschap2: 65 [mschap] Creating challenge hash with username: netengtest [mschap] expand: --challenge=%{mschap:Challenge:-00} -> --challenge=80f102377e0b1914 [mschap] expand: --nt-response=%{mschap:NT-Response:-00} -> --nt-response=b656fe75b45fb03fcdb6cd0c1e7675da77b79296fb32e768 Exec-Program output: NT_KEY: B2E9713382580CAFC4C5EAE9B83F6461 Exec-Program-Wait: plaintext: NT_KEY: B2E9713382580CAFC4C5EAE9B83F6461 Exec-Program: returned: 0 [mschap] adding MS-CHAPv2 MPPE keys ++[mschap] returns ok # Executing section post-auth from file /devel/sites-enabled/default +- entering group post-auth {...} ++[exec] returns noop Sending Access-Accept of id 50 to 1.1.2.4 port 33350 MS-CHAP2-Success = 0x06533d38383935363335453339443030353230304644393132383945323846323245424242423042453530 MS-MPPE-Recv-Key = 0xc5abbc0bad0bf488c01523801f46f494 MS-MPPE-Send-Key = 0x48e3498b39788d95b47add261796c57d MS-MPPE-Encryption-Policy = 0x00000001 MS-MPPE-Encryption-Types = 0x00000006 Finished request 4. #Not Working, windows auto retry rad_recv: Access-Request packet from host 1.1.2.4 port 33350, id=51, length=249 NAS-IP-Address = 1.1.2.4 NAS-Port = 0 NAS-Port-Type = Wireless-802.11 User-Name = "WADDELL\\netengtest" Calling-Station-Id = "58946BB9F738" Called-Station-Id = "000B8661BF34" MS-CHAP-Challenge = 0x311d0b69fd0ee15bf605dda7b0c7da0e MS-CHAP2-Response = 0x06008b488ab132a5a2ee7d3051bf0f75858700000000000000003bc8b876f0e5171fc2aef6667fbe2a038cb846368d395fa5 Service-Type = Login-User Aruba-Essid-Name = "Bob" Aruba-Location-Id = "00:24:6c:c3:43:d3" NAS-Identifier = "Aruba-WLAN-1" Message-Authenticator = 0x9f6bc9ad403b95afd3506155e9e44761 # Executing section authorize from file /devel/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop [mschap] Found MS-CHAP attributes. Setting 'Auth-Type = mschap' ++[mschap] returns ok ++[digest] returns noop [suffix] No '@' in User-Name = "WADDELL\netengtest", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] No EAP-Message, not doing EAP ++[eap] returns noop ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = MSCHAP # Executing group from file /devel/sites-enabled/default +- entering group MS-CHAP {...} [mschap] Creating challenge hash with username: netengtest [mschap] Told to do MS-CHAPv2 for netengtest with NT-Password [mschap] expand: %{mschap:User-Name} -> netengtest [mschap] expand: --username=%{%{mschap:User-Name}:-%{User-Name:-None}} -> --username=netengtest [mschap] mschap2: 31 [mschap] Creating challenge hash with username: netengtest [mschap] expand: --challenge=%{mschap:Challenge:-00} -> --challenge=c118e8c6818033b1 [mschap] expand: --nt-response=%{mschap:NT-Response:-00} -> --nt-response=3bc8b876f0e5171fc2aef6667fbe2a038cb846368d395fa5 Exec-Program output: Logon failure (0xc000006d) Exec-Program-Wait: plaintext: Logon failure (0xc000006d) Exec-Program: returned: 1 [mschap] External script failed. [mschap] FAILED: MS-CHAP2-Response is incorrect ++[mschap] returns reject Failed to authenticate the user. Using Post-Auth-Type Reject # Executing group from file /devel/sites-enabled/default +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> WADDELL\netengtest attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 5 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 5 Sending Access-Reject of id 51 to 1.1.2.4 port 33350 #Not Working, Manually entered password rad_recv: Access-Request packet from host 1.1.2.4 port 33350, id=52, length=249 NAS-IP-Address = 1.1.2.4 NAS-Port = 0 NAS-Port-Type = Wireless-802.11 User-Name = "WADDELL\\netengtest" Calling-Station-Id = "58946BB9F738" Called-Station-Id = "000B8661BF34" MS-CHAP-Challenge = 0xda7118673bd18b3563feedff1107cc3f MS-CHAP2-Response = 0x070026aa6bd893de1a79db494843ad54b22e0000000000000000844ffd37fcda8bb1053320572de943678762ac51805a9170 Service-Type = Login-User Aruba-Essid-Name = "Bob" Aruba-Location-Id = "00:24:6c:c3:43:d3" NAS-Identifier = "Aruba-WLAN-1" Message-Authenticator = 0xd61275e77c4c589d7dea376d07ed6a57 # Executing section authorize from file /devel/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop [mschap] Found MS-CHAP attributes. Setting 'Auth-Type = mschap' ++[mschap] returns ok ++[digest] returns noop [suffix] No '@' in User-Name = "WADDELL\netengtest", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] No EAP-Message, not doing EAP ++[eap] returns noop ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = MSCHAP # Executing group from file /devel/sites-enabled/default +- entering group MS-CHAP {...} [mschap] Creating challenge hash with username: netengtest [mschap] Told to do MS-CHAPv2 for netengtest with NT-Password [mschap] expand: %{mschap:User-Name} -> netengtest [mschap] expand: --username=%{%{mschap:User-Name}:-%{User-Name:-None}} -> --username=netengtest [mschap] mschap2: da [mschap] Creating challenge hash with username: netengtest [mschap] expand: --challenge=%{mschap:Challenge:-00} -> --challenge=a2e2cf9f927f511c [mschap] expand: --nt-response=%{mschap:NT-Response:-00} -> --nt-response=844ffd37fcda8bb1053320572de943678762ac51805a9170 Exec-Program output: Logon failure (0xc000006d) Exec-Program-Wait: plaintext: Logon failure (0xc000006d) Exec-Program: returned: 1 [mschap] External script failed. [mschap] FAILED: MS-CHAP2-Response is incorrect ++[mschap] returns reject Failed to authenticate the user. Using Post-Auth-Type Reject # Executing group from file /devel/sites-enabled/default +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> WADDELL\netengtest attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 6 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 6 Sending Access-Reject of id 52 to 1.1.2.4 port 33350 Waking up in 4.9 seconds. <font size="1"> <div style='border:none;border-bottom:double windowtext 2.25pt;padding:0in 0in 1.0pt 0in'> </div> "This email is intended to be reviewed by only the intended recipient and may contain information that is privileged and/or confidential. If you are not the intended recipient, you are hereby notified that any review, use, dissemination, disclosure or copying of this email and its attachments, if any, is strictly prohibited. If you have received this email in error, please immediately notify the sender by return email and delete this email from your system." </font>

3 4

freeradius, radacct table, postgres, tablespace per year
by tmihalicek 13 May '11

13 May '11

Hello I want to create radacct, radacct_2010 and radacct_2011 as an inherited childs and the trigger that will separate acc records by year in year tables. With postauth is simple enough cause it has postauthdate as a single timestamp and the radacct has the stoptime and starttime columns. Any advice is welcome. t. -- View this message in context: http://freeradius.1045715.n5.nabble.com/freeradius-radacct-table-postgres-t… Sent from the FreeRadius - User mailing list archive at Nabble.com.

1 0

rad post auth
by Steve Staples 13 May '11

13 May '11

I've been searching the docs/wiki, and can't seem to find an answer to this... what variables are available to store in the rad post auth? the sql query shows username, password, reply and date/time... Sorry if this is documented somewhere, I just couldn't find it. Steve

3 6

Alvarion BreezeMAX & 4Motion Service Profiles
by Ryan Williams 13 May '11

13 May '11

Has anyone been able to get the Alvarion BreezeMAX to apply a service profile for a subscriber through radius? or has anyone been able to get debug logging out of the BreezeMAX perhaps via syslog? I believe I've got the service interfaces, service groups etc configured the same in both products. The BreezeMAX works if I disable RADIUS but doesn't work with the following radius reply. The following access accept works with the Alvarion 4Motion product but not with the BreezeMAX. Sending Access-Accept of id 13 to 10.12.15.50 port 49154 Session-Timeout = 3600 Termination-Action = RADIUS-Request Filter-Id = "SP1" EAP-Message = 0x03080004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = "{am=1}test(a)test.com.au" WiMAX-MSK = 0x18bffebb46ac2e95ee730b7ecc0eaa5eb4b586fe29e5113f97f1ab794b4405f9d77aaa432c bb91eb9e4d3ea7e65dded2bb765e18491c62530cf3edee80c644a1

4 4

mschap MS isa error
by Doty, Seth 13 May '11

13 May '11

I have downloaded and installed the git repo version of what will become 2.1.11 on May 10 because of a proxy bug that is fixed in this version. In our current testing setup freeradius takes all information from the realm and passes in to a MS network policy server for authentication into AD. The authentication portion appears to work and we get an accept, but we are not getting any of the group information passed from the freeradius server to the wireless controller. It appears that freeradius is receiving it, just not passing it along. Mostly we are looking to see if this is a config error or if its an issue in the dev code. Radius -X output is below. FreeRADIUS Version 2.1.11, for host x86_64-unknown-linux-gnu, built on May 10 2011 at 11:21:52 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /usr/local/etc/raddb/radiusd.conf including configuration file /usr/local/etc/raddb/proxy.conf including configuration file /usr/local/etc/raddb/clients.conf including files in directory /usr/local/etc/raddb/modules/ including configuration file /usr/local/etc/raddb/modules/expr including configuration file /usr/local/etc/raddb/modules/wimax including configuration file /usr/local/etc/raddb/modules/soh including configuration file /usr/local/etc/raddb/modules/krb5 including configuration file /usr/local/etc/raddb/modules/pam including configuration file /usr/local/etc/raddb/modules/preprocess including configuration file /usr/local/etc/raddb/modules/detail.example.com including configuration file /usr/local/etc/raddb/modules/cui including configuration file /usr/local/etc/raddb/modules/exec including configuration file /usr/local/etc/raddb/modules/realm including configuration file /usr/local/etc/raddb/modules/echo including configuration file /usr/local/etc/raddb/modules/dynamic_clients including configuration file /usr/local/etc/raddb/modules/detail including configuration file /usr/local/etc/raddb/modules/radutmp including configuration file /usr/local/etc/raddb/modules/attr_filter including configuration file /usr/local/etc/raddb/modules/checkval including configuration file /usr/local/etc/raddb/modules/attr_rewrite including configuration file /usr/local/etc/raddb/modules/files including configuration file /usr/local/etc/raddb/modules/rediswho including configuration file /usr/local/etc/raddb/modules/digest including configuration file /usr/local/etc/raddb/modules/mac2vlan including configuration file /usr/local/etc/raddb/modules/always including configuration file /usr/local/etc/raddb/modules/sradutmp including configuration file /usr/local/etc/raddb/modules/passwd including configuration file /usr/local/etc/raddb/modules/acct_unique including configuration file /usr/local/etc/raddb/modules/otp including configuration file /usr/local/etc/raddb/modules/expiration including configuration file /usr/local/etc/raddb/modules/perl including configuration file /usr/local/etc/raddb/modules/ippool including configuration file /usr/local/etc/raddb/modules/chap including configuration file /usr/local/etc/raddb/modules/policy including configuration file /usr/local/etc/raddb/modules/redis including configuration file /usr/local/etc/raddb/modules/unix including configuration file /usr/local/etc/raddb/modules/smbpasswd including configuration file /usr/local/etc/raddb/modules/etc_group including configuration file /usr/local/etc/raddb/modules/sql_log including configuration file /usr/local/etc/raddb/modules/smsotp including configuration file /usr/local/etc/raddb/modules/pap including configuration file /usr/local/etc/raddb/modules/detail.log including configuration file /usr/local/etc/raddb/modules/mac2ip including configuration file /usr/local/etc/raddb/modules/ntlm_auth including configuration file /usr/local/etc/raddb/modules/sqlcounter_expire_on_login including configuration file /usr/local/etc/raddb/modules/mschap including configuration file /usr/local/etc/raddb/modules/opendirectory including configuration file /usr/local/etc/raddb/modules/linelog including configuration file /usr/local/etc/raddb/modules/logintime including configuration file /usr/local/etc/raddb/modules/ldap including configuration file /usr/local/etc/raddb/modules/inner-eap including configuration file /usr/local/etc/raddb/modules/counter including configuration file /usr/local/etc/raddb/eap.conf including configuration file /usr/local/etc/raddb/policy.conf including files in directory /usr/local/etc/raddb/sites-enabled/ including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel including configuration file /usr/local/etc/raddb/sites-enabled/default including configuration file /usr/local/etc/raddb/sites-enabled/control-socket main { allow_core_dumps = no } including dictionary file /usr/local/etc/raddb/dictionary main { name = "radiusd" prefix = "/usr/local" localstatedir = "/usr/local/var" sbindir = "/usr/local/sbin" logdir = "/usr/local/var/log/radius" run_dir = "/usr/local/var/run/radiusd" libdir = "/usr/local/lib" radacctdir = "/usr/local/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/usr/local/var/run/radiusd/radiusd.pid" checkrad = "/usr/local/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 require_message_authenticator = yes zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 irt = 2 mrt = 16 mrc = 5 mrd = 30 } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } realm NULL { authhost = 10.10.10.10 secret = testing } realm nebraska.gov { nostrip authhost = 10.10.10.10 secret = testing123 } realm DEFAULT { } realm arr { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } client 10.10.10.11 { require_message_authenticator = no secret = "testing" shortname = "thing-O'doom" } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating module "exec" from file /usr/local/etc/raddb/modules/exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating module "expr" from file /usr/local/etc/raddb/modules/expr Module: Linked to module rlm_expiration Module: Instantiating module "expiration" from file /usr/local/etc/raddb/modules/expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating module "logintime" from file /usr/local/etc/raddb/modules/logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server { # from file /usr/local/etc/raddb/radiusd.conf modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating module "pap" from file /usr/local/etc/raddb/modules/pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating module "chap" from file /usr/local/etc/raddb/modules/chap Module: Linked to module rlm_mschap Module: Instantiating module "mschap" from file /usr/local/etc/raddb/modules/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no allow_retry = yes } Module: Linked to module rlm_digest Module: Instantiating module "digest" from file /usr/local/etc/raddb/modules/digest Module: Linked to module rlm_unix Module: Instantiating module "unix" from file /usr/local/etc/raddb/modules/unix unix { radwtmp = "/usr/local/var/log/radius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating module "eap" from file /usr/local/etc/raddb/eap.conf eap { default_eap_type = "peap" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 4096 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 CA_path = "/usr/local/etc/raddb/certs" pem_file_type = yes private_key_file = "/usr/local/etc/raddb/certs/server.pem" certificate_file = "/usr/local/etc/raddb/certs/server.pem" CA_file = "/usr/local/etc/raddb/certs/ca.pem" private_key_password = "whatever" dh_file = "/usr/local/etc/raddb/certs/dh" random_file = "/usr/local/etc/raddb/certs/random" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/usr/local/etc/raddb/certs/bootstrap" cache { enable = no lifetime = 24 max_entries = 255 } verify { } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = yes use_tunneled_reply = yes virtual_server = "inner-tunnel" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = yes use_tunneled_reply = yes proxy_tunneled_request_as_eap = no virtual_server = "inner-tunnel" soh = no } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating module "preprocess" from file /usr/local/etc/raddb/modules/preprocess preprocess { huntgroups = "/usr/local/etc/raddb/huntgroups" hints = "/usr/local/etc/raddb/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Linked to module rlm_files Module: Instantiating module "files" from file /usr/local/etc/raddb/modules/files files { usersfile = "/usr/local/etc/raddb/users" acctusersfile = "/usr/local/etc/raddb/acct_users" preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users" compat = "no" } Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating module "acct_unique" from file /usr/local/etc/raddb/modules/acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating module "detail" from file /usr/local/etc/raddb/modules/detail detail { detailfile = "/usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Linked to module rlm_radutmp Module: Instantiating module "radutmp" from file /usr/local/etc/raddb/modules/radutmp radutmp { filename = "/usr/local/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Linked to module rlm_attr_filter Module: Instantiating module "attr_filter.accounting_response" from file /usr/local/etc/raddb/modules/attr_filter attr_filter attr_filter.accounting_response { attrsfile = "/usr/local/etc/raddb/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Instantiating module "attr_filter.access_reject" from file /usr/local/etc/raddb/modules/attr_filter attr_filter attr_filter.access_reject { attrsfile = "/usr/local/etc/raddb/attrs.access_reject" key = "%{User-Name}" } } # modules } # server server inner-tunnel { # from file /usr/local/etc/raddb/sites-enabled/inner-tunnel modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating module "suffix" from file /usr/local/etc/raddb/modules/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Instantiating module "ntdomain" from file /usr/local/etc/raddb/modules/realm realm ntdomain { format = "prefix" delimiter = "\" ignore_default = no ignore_null = no } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } listen { type = "control" listen { socket = "/usr/local/var/run/radiusd/radiusd.sock" } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on command file /usr/local/var/run/radiusd/radiusd.sock Listening on authentication address 127.0.0.1 port 18120 as server inner-tunnel Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 10.10.10.11 port 32800, id=89, length=177 User-Name = "test.user" NAS-IP-Address = 10.x.x.x NAS-Port = 0 NAS-Identifier = "10.x.x.x" NAS-Port-Type = Wireless-802.11 Calling-Station-Id = "00259C9BE72C" Called-Station-Id = "000B8661628C" Service-Type = Login-User Framed-MTU = 1100 EAP-Message = 0x02010011017061747269636b2e7365696d Aruba-Essid-Name = "NEW_TEST" Aruba-Location-Id = "test-ap-41" Message-Authenticator = 0xdf151b9dba8cb89031a97a35c3a5525c # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [eap] EAP packet type response id 1 length 17 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] EAP Identity [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 89 to 10.10.10.11 port 32800 EAP-Message = 0x010200061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x2052e9672050f0faff17be72cc36539c Finished request 0. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.10.10.11 port 32800, id=90, length=283 User-Name = "test.user" NAS-IP-Address = 10.x.x.x NAS-Port = 0 NAS-Identifier = "10.x.x.x" NAS-Port-Type = Wireless-802.11 Calling-Station-Id = "00259C9BE72C" Called-Station-Id = "000B8661628C" Service-Type = Login-User Framed-MTU = 1100 EAP-Message = 0x0202006919800000005f160301005a0100005603014dcc447a9e26be32ebd0fd1adefa8a85c46f008e37baba3c6b718a4284c34a2a000018002f00350005000ac013c014c009c00a003200380013000401000015ff01000100000a0006000400170018000b00020100 State = 0x2052e9672050f0faff17be72cc36539c Aruba-Essid-Name = "NEW_TEST" Aruba-Location-Id = "test-ap-41" Message-Authenticator = 0xdf99df74968c610596c6a85a61b0c202 # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [eap] EAP packet type response id 2 length 105 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 95 [peap] Length Included [peap] eaptls_verify returned 11 [peap] (other): before/accept initialization [peap] TLS_accept: before/accept initialization [peap] <<< TLS 1.0 Handshake [length 005a], ClientHello [peap] TLS_accept: SSLv3 read client hello A [peap] >>> TLS 1.0 Handshake [length 0031], ServerHello [peap] TLS_accept: SSLv3 write server hello A [peap] >>> TLS 1.0 Handshake [length 085e], Certificate [peap] TLS_accept: SSLv3 write certificate A [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [peap] TLS_accept: SSLv3 write server done A [peap] TLS_accept: SSLv3 flush data [peap] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 90 to 10.10.10.11 port 32800 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x380004ab308204a73082038f Message-Authenticator = 0x00000000000000000000000000000000 State = 0x2052e9672151f0faff17be72cc36539c Finished request 1. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.10.10.11 port 32800, id=91, length=184 User-Name = "test.user" NAS-IP-Address = 10.x.x.x NAS-Port = 0 NAS-Identifier = "10.x.x.x" NAS-Port-Type = Wireless-802.11 Calling-Station-Id = "00259C9BE72C" Called-Station-Id = "000B8661628C" Service-Type = Login-User Framed-MTU = 1100 EAP-Message = 0x020300061900 State = 0x2052e9672151f0faff17be72cc36539c Aruba-Essid-Name = "NEW_TEST" Aruba-Location-Id = "test-ap-41" Message-Authenticator = 0xc02c4b0944964e409f405fd7adbdc17a # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [eap] EAP packet type response id 3 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 91 to 10.10.10.11 port 32800 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x625424b11b2973c2 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x2052e9672256f0faff17be72cc36539c Finished request 2. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.10.10.11 port 32800, id=92, length=184 User-Name = "test.user" NAS-IP-Address = 10.x.x.x NAS-Port = 0 NAS-Identifier = "10.x.x.x" NAS-Port-Type = Wireless-802.11 Calling-Station-Id = "00259C9BE72C" Called-Station-Id = "000B8661628C" Service-Type = Login-User Framed-MTU = 1100 EAP-Message = 0x020400061900 State = 0x2052e9672256f0faff17be72cc36539c Aruba-Essid-Name = "NEW_TEST" Aruba-Location-Id = "test-ap-41" Message-Authenticator = 0xbce793c7192ddc319b9a79c0dbbd41a5 # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [eap] EAP packet type response id 4 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 92 to 10.10.10.11 port 32800 EAP-Message = 0x010500bc190097aea26a1dd042d90f3c02c05e438e6e316279e061ad1dea2285c4b5587e88f045afa44cd2fe0c97337d208e2b728b4f0de04540495e4fbb19cfde5e258f9a54256fc6118758a8efafd62b4455d2bd95c1efe2cbd1e7d79eeed1402d04d66ebbf3aa1e48183ae284c4e849fd64db81281a912ea446537710c4318c1bf96b18c269fb16098655227700a2d2c92e735b5eeae8dcbdafb0da219751d868a85a2b27922790ca348a64f9a84b08af4d16030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x2052e9672357f0faff17be72cc36539c Finished request 3. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.10.10.11 port 32800, id=93, length=516 User-Name = "test.user" NAS-IP-Address = 10.x.x.x NAS-Port = 0 NAS-Identifier = "10.x.x.x" NAS-Port-Type = Wireless-802.11 Calling-Station-Id = "00259C9BE72C" Called-Station-Id = "000B8661628C" Service-Type = Login-User Framed-MTU = 1100 EAP-Message = 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 EAP-Message = 0xa2011e44ad7c45d7bc053a48344fefbbf5a6a910b1f53e111403010001011603010030343cf27cd25659485fa80be7a33226410f80e950184826afa4244eca7e4a7a11a901f1fd3f5647f54f27af3496071065 State = 0x2052e9672357f0faff17be72cc36539c Aruba-Essid-Name = "NEW_TEST" Aruba-Location-Id = "test-ap-41" Message-Authenticator = 0xd7cb67bd36cf87c50b4eaddc02d14e18 # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [eap] EAP packet type response id 5 length 253 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 326 [peap] Length Included [peap] eaptls_verify returned 11 [peap] <<< TLS 1.0 Handshake [length 0106], ClientKeyExchange [peap] TLS_accept: SSLv3 read client key exchange A [peap] <<< TLS 1.0 ChangeCipherSpec [length 0001] [peap] <<< TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 read finished A [peap] >>> TLS 1.0 ChangeCipherSpec [length 0001] [peap] TLS_accept: SSLv3 write change cipher spec A [peap] >>> TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 write finished A [peap] TLS_accept: SSLv3 flush data [peap] (other): SSL negotiation finished successfully SSL Connection Established [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 93 to 10.10.10.11 port 32800 EAP-Message = 0x010600411900140301000101160301003066a73876a01fa3964df69d40f877ff5f284b71a339b38b6022dc323996127d976155e63deec1b57cae6f764ac0307be3 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x2052e9672454f0faff17be72cc36539c Finished request 4. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.10.10.11 port 32800, id=94, length=184 User-Name = "test.user" NAS-IP-Address = 10.x.x.x NAS-Port = 0 NAS-Identifier = "10.x.x.x" NAS-Port-Type = Wireless-802.11 Calling-Station-Id = "00259C9BE72C" Called-Station-Id = "000B8661628C" Service-Type = Login-User Framed-MTU = 1100 EAP-Message = 0x020600061900 State = 0x2052e9672454f0faff17be72cc36539c Aruba-Essid-Name = "NEW_TEST" Aruba-Location-Id = "test-ap-41" Message-Authenticator = 0x50a8c2ff0b03d4e3ef93dfdd854aa205 # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [eap] EAP packet type response id 6 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake is finished [peap] eaptls_verify returned 3 [peap] eaptls_process returned 3 [peap] EAPTLS_SUCCESS [peap] Session established. Decoding tunneled attributes. [peap] Peap state TUNNEL ESTABLISHED ++[eap] returns handled Sending Access-Challenge of id 94 to 10.10.10.11 port 32800 EAP-Message = 0x0107002b19001703010020d1bc9f15904697a8f3a5e0c0f6e37bde3b6f406889de52ba92d8f14e3eeb2f7f Message-Authenticator = 0x00000000000000000000000000000000 State = 0x2052e9672555f0faff17be72cc36539c Finished request 5. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.10.10.11 port 32800, id=95, length=237 User-Name = "test.user" NAS-IP-Address = 10.x.x.x NAS-Port = 0 NAS-Identifier = "10.x.x.x" NAS-Port-Type = Wireless-802.11 Calling-Station-Id = "00259C9BE72C" Called-Station-Id = "000B8661628C" Service-Type = Login-User Framed-MTU = 1100 EAP-Message = 0x0207003b19001703010030aa3b4cd58b3962aeae0c612785a20fd2a9ff0823ea6640e47befdaabedab43ab648046ba0a365957694ab46520928d8a State = 0x2052e9672555f0faff17be72cc36539c Aruba-Essid-Name = "NEW_TEST" Aruba-Location-Id = "test-ap-41" Message-Authenticator = 0x89794a3abd2819405279c72d48e91da8 # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [eap] EAP packet type response id 7 length 59 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state WAITING FOR INNER IDENTITY [peap] Identity - test.user [peap] Got inner identity 'test.user' [peap] Setting default EAP type for tunneled EAP session. [peap] Got tunneled request EAP-Message = 0x02070011017061747269636b2e7365696d server { [peap] Setting User-Name to test.user Sending tunneled request EAP-Message = 0x02070011017061747269636b2e7365696d FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "test.user" NAS-IP-Address = 10.x.x.x NAS-Port = 0 NAS-Identifier = "10.x.x.x" NAS-Port-Type = Wireless-802.11 Calling-Station-Id = "00259C9BE72C" Called-Station-Id = "000B8661628C" Service-Type = Login-User Framed-MTU = 1100 Aruba-Essid-Name = "NEW_TEST" Aruba-Location-Id = "test-ap-41" server inner-tunnel { # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/inner-tunnel +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "test.user", looking up realm NULL [suffix] Found realm "NULL" [suffix] Adding Stripped-User-Name = "test.user" [suffix] Adding Realm = "NULL" [suffix] Proxying request from user test.user to realm NULL [suffix] Preparing to proxy authentication request to realm "NULL" ++[suffix] returns updated [ntdomain] Request already proxied. Ignoring. ++[ntdomain] returns ok [eap] Request is supposed to be proxied to Realm NULL. Not doing EAP. ++[eap] returns noop ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop } # server inner-tunnel [peap] Got tunneled reply code 0 PEAP: Calling authenticate in order to initiate tunneled EAP session. # Executing group from file /usr/local/etc/raddb/sites-enabled/inner-tunnel +- entering group authenticate {...} [eap] EAP Identity [eap] processing type mschapv2 rlm_eap_mschapv2: Issuing Challenge ++[eap] returns handled PEAP: Cancelling proxy to realm NULL until the tunneled EAP session has been established [peap] Got tunneled reply RADIUS code 11 EAP-Message = 0x010800261a0108002110148b6ec01694003ba739d7c1317734327061747269636b2e7365696d Message-Authenticator = 0x00000000000000000000000000000000 State = 0x77077cec770f66abbb823e592cf0990c [peap] Got tunneled Access-Challenge ++[eap] returns handled Sending Access-Challenge of id 95 to 10.10.10.11 port 32800 EAP-Message = 0x0108004b19001703010040a08cd426955c25ad3a51bf209509b2a4bc4fe6c10b3c3493c06eca2839d1bce711f02900d477d0136fb673ddaafee249939c0e18e27849555a40e5368bae0c89 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x2052e967265af0faff17be72cc36539c Finished request 6. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.10.10.11 port 32800, id=96, length=285 User-Name = "test.user" NAS-IP-Address = 10.x.x.x NAS-Port = 0 NAS-Identifier = "10.x.x.x" NAS-Port-Type = Wireless-802.11 Calling-Station-Id = "00259C9BE72C" Called-Station-Id = "000B8661628C" Service-Type = Login-User Framed-MTU = 1100 EAP-Message = 0x0208006b19001703010060df0be2d261566e3ba81ad2ff49841b97963f9a8b38bb45ee22028938767a57c113d36230a7276fccc49641fa2ff660afeea870007f4a26ddb2b82081e8b95981ab8590b82c309facf3f4269b7724c2fac2057882cb750d47112722f0d9d9dc92 State = 0x2052e967265af0faff17be72cc36539c Aruba-Essid-Name = "NEW_TEST" Aruba-Location-Id = "test-ap-41" Message-Authenticator = 0xc7d4fc6f0e62c2922a7ef9eb414b3ab7 # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [eap] EAP packet type response id 8 length 107 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state phase2 [peap] EAP type mschapv2 [peap] Got tunneled request EAP-Message = 0x020800471a02080042317d0e90f4aa65b4bd430e9f694541779000000000000000007eb68ee463835b22f336f9e73e379b8308bba82e828efc91007061747269636b2e7365696d server { [peap] Setting User-Name to test.user Sending tunneled request EAP-Message = 0x020800471a02080042317d0e90f4aa65b4bd430e9f694541779000000000000000007eb68ee463835b22f336f9e73e379b8308bba82e828efc91007061747269636b2e7365696d FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "test.user" State = 0x77077cec770f66abbb823e592cf0990c NAS-IP-Address = 10.x.x.x NAS-Port = 0 NAS-Identifier = "10.x.x.x" NAS-Port-Type = Wireless-802.11 Calling-Station-Id = "00259C9BE72C" Called-Station-Id = "000B8661628C" Service-Type = Login-User Framed-MTU = 1100 Aruba-Essid-Name = "NEW_TEST" Aruba-Location-Id = "test-ap-41" server inner-tunnel { # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/inner-tunnel +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "test.user", looking up realm NULL [suffix] Found realm "NULL" [suffix] Adding Stripped-User-Name = "test.user" [suffix] Adding Realm = "NULL" [suffix] Proxying request from user test.user to realm NULL [suffix] Preparing to proxy authentication request to realm "NULL" ++[suffix] returns updated [ntdomain] Request already proxied. Ignoring. ++[ntdomain] returns ok [eap] Request is supposed to be proxied to Realm NULL. Not doing EAP. ++[eap] returns noop ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop } # server inner-tunnel [peap] Got tunneled reply code 0 PEAP: Calling authenticate in order to initiate tunneled EAP session. # Executing group from file /usr/local/etc/raddb/sites-enabled/inner-tunnel +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/mschapv2 [eap] processing type mschapv2 [eap] Not-EAP proxy set. Not composing EAP ++[eap] returns handled PEAP: Tunneled authentication will be proxied to NULL PEAP: Remembering to do EAP-MS-CHAP-V2 post-proxy. [eap] Tunneled session will be proxied. Not doing EAP. ++[eap] returns handled WARNING: Empty pre-proxy section. Using default return values. Sending Access-Request of id 4 to 10.10.10.10 port 1812 User-Name = "test.user" NAS-IP-Address = 10.x.x.x NAS-Port = 0 NAS-Identifier = "10.x.x.x" NAS-Port-Type = Wireless-802.11 Calling-Station-Id = "00259C9BE72C" Called-Station-Id = "000B8661628C" Service-Type = Login-User Framed-MTU = 1100 Aruba-Essid-Name = "NEW_TEST" Aruba-Location-Id = "test-ap-41" MS-CHAP-Challenge = 0x148b6ec01694003ba739d7c131773432 MS-CHAP2-Response = 0x08617d0e90f4aa65b4bd430e9f694541779000000000000000007eb68ee463835b22f336f9e73e379b8308bba82e828efc91 Proxy-State = 0x3936 Proxying request 7 to home server 10.10.10.10 port 1812 Sending Access-Request of id 4 to 10.10.10.10 port 1812 User-Name = "test.user" NAS-IP-Address = 10.x.x.x NAS-Port = 0 NAS-Identifier = "10.x.x.x" NAS-Port-Type = Wireless-802.11 Calling-Station-Id = "00259C9BE72C" Called-Station-Id = "000B8661628C" Service-Type = Login-User Framed-MTU = 1100 Aruba-Essid-Name = "NEW_TEST" Aruba-Location-Id = "test-ap-41" MS-CHAP-Challenge = 0x148b6ec01694003ba739d7c131773432 MS-CHAP2-Response = 0x08617d0e90f4aa65b4bd430e9f694541779000000000000000007eb68ee463835b22f336f9e73e379b8308bba82e828efc91 Proxy-State = 0x3936 Going to the next request Waking up in 0.9 seconds. rad_recv: Access-Accept packet from host 10.10.10.10 port 1812, id=4, length=291 Proxy-State = 0x3936 Aruba-User-Role = "network-fools" Filter-Id = "networking" Tunnel-Private-Group-Id:0 = "default" Class = 0x4e8a062e00000137000117000000000000000000000000000000000101cbfeebf8e6a00c0000000000007429 MS-MPPE-Recv-Key = 0x7f1107c20babf24559df0d663ee39985 MS-MPPE-Send-Key = 0x90d1203360319de86b213aad9476d06f MS-CHAP2-Success = 0x08533d45364132353930413732433133373630394336383638373838453639443543324637393244444632 MS-CHAP-Domain = "\010STN" MS-Link-Utilization-Threshold = 50 MS-Link-Drop-Time-Limit = 120 # Executing section post-proxy from file /usr/local/etc/raddb/sites-enabled/default +- entering group post-proxy {...} [eap] Doing post-proxy callback [eap] Passing reply from proxy back into the tunnel. server inner-tunnel { [eap] Passing reply back for EAP-MS-CHAP-V2 # Executing section post-proxy from file /usr/local/etc/raddb/sites-enabled/inner-tunnel +- entering group post-proxy {...} [eap] Doing post-proxy callback rlm_eap_mschapv2: Passing reply from proxy back into the tunnel 0x997890 2. rlm_eap_mschapv2: Authentication succeeded. MSCHAP Success ++[eap] returns ok # Executing section post-auth from file /usr/local/etc/raddb/sites-enabled/inner-tunnel +- entering group post-auth {...} expand: %{request:Filter-Id} -> ++[outer.reply] returns noop } # server inner-tunnel [eap] Final reply from tunneled session code 11 Proxy-State = 0x3936 Aruba-User-Role = "network-fools" Filter-Id = "networking" Tunnel-Private-Group-Id:0 = "default" Class = 0x4e8a062e00000137000117000000000000000000000000000000000101cbfeebf8e6a00c0000000000007429 MS-CHAP-Domain = "\010STN" MS-Link-Utilization-Threshold = 50 MS-Link-Drop-Time-Limit = 120 EAP-Message = 0x010900331a0308002e533d45364132353930413732433133373630394336383638373838453639443543324637393244444632 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x77077cec760e66abbb823e592cf0990c [eap] Got reply 11 [eap] Got tunneled reply RADIUS code 11 Proxy-State = 0x3936 Aruba-User-Role = "network-fools" Filter-Id = "networking" Tunnel-Private-Group-Id:0 = "default" Class = 0x4e8a062e00000137000117000000000000000000000000000000000101cbfeebf8e6a00c0000000000007429 MS-CHAP-Domain = "\010STN" MS-Link-Utilization-Threshold = 50 MS-Link-Drop-Time-Limit = 120 EAP-Message = 0x010900331a0308002e533d45364132353930413732433133373630394336383638373838453639443543324637393244444632 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x77077cec760e66abbb823e592cf0990c [eap] Got tunneled Access-Challenge [eap] Saving tunneled attributes for later [eap] Reply was handled ++[eap] returns ok Sending Access-Challenge of id 96 to 10.10.10.11 port 32800 Filter-Id = "" EAP-Message = 0x0109005b190017030100509d9a4aa35ec2cb40ae533f0d7be59fdcc8a6b2cc3fccfa3b6dcaa6ca24dae27f958a0332f39cd817a23f92da039626f59dfca32c43bb8cd8827aefdc43c3c7cbf30a749995ee3169b7392387d5d0b7a5 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x2052e967275bf0faff17be72cc36539c Finished request 7. Going to the next request Waking up in 4.8 seconds. rad_recv: Access-Request packet from host 10.10.10.11 port 32800, id=97, length=221 User-Name = "test.user" NAS-IP-Address = 10.x.x.x NAS-Port = 0 NAS-Identifier = "10.x.x.x" NAS-Port-Type = Wireless-802.11 Calling-Station-Id = "00259C9BE72C" Called-Station-Id = "000B8661628C" Service-Type = Login-User Framed-MTU = 1100 EAP-Message = 0x0209002b19001703010020bff5e4f0a093f4fbba3dac4511f756c7c5c7d74ed1886fb99d704dd69b6ad7f3 State = 0x2052e967275bf0faff17be72cc36539c Aruba-Essid-Name = "NEW_TEST" Aruba-Location-Id = "test-ap-41" Message-Authenticator = 0x66847103a90432b93ab24808d8ec7a71 # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [eap] EAP packet type response id 9 length 43 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state phase2 [peap] EAP type mschapv2 [peap] Got tunneled request EAP-Message = 0x020900061a03 server { [peap] Setting User-Name to test.user Sending tunneled request EAP-Message = 0x020900061a03 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "test.user" State = 0x77077cec760e66abbb823e592cf0990c NAS-IP-Address = 10.x.x.x NAS-Port = 0 NAS-Identifier = "10.x.x.x" NAS-Port-Type = Wireless-802.11 Calling-Station-Id = "00259C9BE72C" Called-Station-Id = "000B8661628C" Service-Type = Login-User Framed-MTU = 1100 Aruba-Essid-Name = "NEW_TEST" Aruba-Location-Id = "test-ap-41" server inner-tunnel { # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/inner-tunnel +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "test.user", looking up realm NULL [suffix] Found realm "NULL" [suffix] Adding Stripped-User-Name = "test.user" [suffix] Adding Realm = "NULL" [suffix] Proxying request from user test.user to realm NULL [suffix] Preparing to proxy authentication request to realm "NULL" ++[suffix] returns updated [ntdomain] Request already proxied. Ignoring. ++[ntdomain] returns ok [eap] Request is supposed to be proxied to Realm NULL. Not doing EAP. ++[eap] returns noop ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop } # server inner-tunnel [peap] Got tunneled reply code 0 PEAP: Calling authenticate in order to initiate tunneled EAP session. # Executing group from file /usr/local/etc/raddb/sites-enabled/inner-tunnel +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/mschapv2 [eap] processing type mschapv2 [eap] Freeing handler ++[eap] returns ok [peap] Got tunneled reply RADIUS code 2 MS-MPPE-Send-Key = 0x90d1203360319de86b213aad9476d06f MS-MPPE-Recv-Key = 0x7f1107c20babf24559df0d663ee39985 EAP-Message = 0x03090004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = "test.user" [peap] Tunneled authentication was successful. [peap] SUCCESS [peap] Saving tunneled attributes for later ++[eap] returns handled Sending Access-Challenge of id 97 to 10.10.10.11 port 32800 EAP-Message = 0x010a002b19001703010020536577cc3da7e7a391006e8c1445b85700ae00a3425cf630c608144333ced9f9 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x2052e9672858f0faff17be72cc36539c Finished request 8. Going to the next request Waking up in 4.8 seconds. rad_recv: Access-Request packet from host 10.10.10.11 port 32800, id=98, length=221 User-Name = "test.user" NAS-IP-Address = 10.x.x.x NAS-Port = 0 NAS-Identifier = "10.x.x.x" NAS-Port-Type = Wireless-802.11 Calling-Station-Id = "00259C9BE72C" Called-Station-Id = "000B8661628C" Service-Type = Login-User Framed-MTU = 1100 EAP-Message = 0x020a002b19001703010020d6214a534ba200598e450e90712affef897efd7f3ea95fb6fdaa1d9f200c9ce4 State = 0x2052e9672858f0faff17be72cc36539c Aruba-Essid-Name = "NEW_TEST" Aruba-Location-Id = "test-ap-41" Message-Authenticator = 0xe89f9162ef2fa954e6dc4c038eaed024 # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [eap] EAP packet type response id 10 length 43 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state send tlv success [peap] Received EAP-TLV response. [peap] Success [peap] Using saved attributes from the original Access-Accept User-Name = "test.user" [eap] Freeing handler ++[eap] returns ok # Executing section post-auth from file /usr/local/etc/raddb/sites-enabled/default +- entering group post-auth {...} ++[exec] returns noop Sending Access-Accept of id 98 to 10.10.10.11 port 32800 User-Name = "test.user" MS-MPPE-Recv-Key = 0x0a169a0bf16593123bc68ed03a6b1b826dc04cfba9dd8cc725d51800710f23a1 MS-MPPE-Send-Key = 0x82ef22906ad494b5b2c2a0f65f1a4ebba82918e8b6ae4a8c4c10b43c4711e63f EAP-Message = 0x030a0004 Message-Authenticator = 0x00000000000000000000000000000000 Finished request 9. Going to the next request Waking up in 4.8 seconds. Cleaning up request 0 ID 89 with timestamp +35 Cleaning up request 1 ID 90 with timestamp +35 Cleaning up request 2 ID 91 with timestamp +35 Cleaning up request 3 ID 92 with timestamp +35 Cleaning up request 4 ID 93 with timestamp +35 Cleaning up request 5 ID 94 with timestamp +35 Cleaning up request 6 ID 95 with timestamp +35 Cleaning up request 7 ID 96 with timestamp +35 Cleaning up request 8 ID 97 with timestamp +35 Cleaning up request 9 ID 98 with timestamp +35 Ready to process requests.

2 1

redundant vs group on http://wiki.freeradius.org/SQL_HOWTO
by Fajar A. Nugraha 12 May '11

12 May '11

http://wiki.freeradius.org/SQL_HOWTO mentions using "group" entry to failover between sql servers. How is it different compared using redundant unlang? Is there additional documentation for group directive? -- Fajar

2 1