- Freeradius-Users - lists.freeradius.org

Freeradius on windows server 2008
by heavysilence 20 May '11

20 May '11

Hello people. Running FreeRadius.net version 1.1.7 r0.0.2 on Windows Server 2008 Authentication works fine in Debug mode.But starting the service normally, nothing happens. No response from the radius server.Tried to set user = nobody group = shadow user = root and all stuff thats looks like that in every combination I could imagine. Still not working Thanks for your help -- View this message in context: http://freeradius.1045715.n5.nabble.com/Freeradius-on-windows-server-2008-t… Sent from the FreeRadius - User mailing list archive at Nabble.com.

2 2

Relation between NAS and FreeRADIUS
by googerdi 19 May '11

19 May '11

Hi It is possible that my question is low level but it is key for me. I want to ask that NAS provide internet or FreeRADIUS. I mean i should connect internet connection to NAS or FreeRADIUS. Does NAS just use FreeRADIUS or any Radius Server to authenticate user and register accounting data in Radius. Thanks -- View this message in context: http://freeradius.1045715.n5.nabble.com/Relation-between-NAS-and-FreeRADIUS… Sent from the FreeRadius - User mailing list archive at Nabble.com.

3 3

ERROR: No authenticate method (Auth-Type) found for the request: Rejecting the user
by Jim Whitescarver 18 May '11

18 May '11

I am hoping someone can help me. We compiled 2.1.x from source and finally got it to accept our python Auth-Type as the default in the users file. DEFAULT Auth-Type := python But, after sucessfully calling our python module the user is rejected ERROR: No authenticate method (Auth-Type) found for the request: Rejecting the user Below is the complete log. Any ideas of what we may be doing wrong? Thanks, Jim Tue May 17 14:15:37 2011 : Debug: Listening on proxy address * port 1814 Tue May 17 14:15:37 2011 : Info: Ready to process requests. rad_recv: Access-Request packet from host 135.207.164.41 port 49346, id=131, length=55 User-Name = "owk" User-Password = "test123" NAS-IP-Address = 135.207.164.41 NAS-Port = 1812 Tue May 17 14:15:50 2011 : Info: # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default Tue May 17 14:15:50 2011 : Info: +- entering group authorize {...} Tue May 17 14:15:50 2011 : Info: ++[preprocess] returns ok *** authorize *** Tue May 17 14:15:50 2011 : Info: *** radlog call in authorize *** (('User-Name', '"owk"'), ('User-Password', '"test123"'), ('NAS-IP-Address', '135.207.164.41'), ('NAS-Port', '1812')) User-Name: "owk" User-Password: "test123" NAS-IP-Address: 135.207.164.41 NAS-Port: 1812 Authenticate User: owk Tue May 17 14:16:16 2011 : Info: ++[python] returns ok Tue May 17 14:16:16 2011 : Info: ERROR: No authenticate method (Auth-Type) found for the request: Rejecting the user Tue May 17 14:16:16 2011 : Info: Failed to authenticate the user. Tue May 17 14:16:16 2011 : Info: Using Post-Auth-Type Reject Tue May 17 14:16:16 2011 : Info: # Executing group from file /usr/local/etc/raddb/sites-enabled/default Tue May 17 14:16:16 2011 : Info: +- entering group REJECT {...} Tue May 17 14:16:16 2011 : Info: [attr_filter.access_reject] expand: %{User-Name} -> owk Tue May 17 14:16:16 2011 : Debug: attr_filter: Matched entry DEFAULT at line 11 Tue May 17 14:16:16 2011 : Info: ++[attr_filter.access_reject] returns updated Sending Access-Reject of id 131 to 135.207.164.41 port 49346 Tue May 17 14:16:16 2011 : Info: Finished request 0. Tue May 17 14:16:16 2011 : Debug: Going to the next request Tue May 17 14:16:16 2011 : Debug: Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 135.207.164.41 port 49346, id=131, length=55 Tue May 17 14:16:16 2011 : Info: Sending duplicate reply to client five-10 port 49346 - ID: 131 Sending Access-Reject of id 131 to 135.207.164.41 port 49346 Tue May 17 14:16:16 2011 : Debug: Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 135.207.164.41 port 49346, id=131, length=55 Tue May 17 14:16:16 2011 : Info: Sending duplicate reply to client five-10 port 49346 - ID: 131 Sending Access-Reject of id 131 to 135.207.164.41 port 49346 Tue May 17 14:16:16 2011 : Debug: Waking up in 4.9 seconds. Tue May 17 14:16:21 2011 : Info: Cleaning up request 0 ID 131 with timestamp +13 Tue May 17 14:16:21 2011 : Info: Ready to process requests.

2 4

Authentication issues with Win7 and WPA/WPA2 Enterprise
by Simon L. 18 May '11

18 May '11

Dear Users, I hope you will be patient with me, its my first time with freeradius. I have problems to authenticate Windows 7 Clients with freeradius. Using WPA2-Enterprise results in Access-Rejects after one Request. Using WPA-Enterprise results in about nine different Access-Challanges and one final Access-Accept - that cant be right. I have set up a testing scenario with the local test user bob. If local authentication works properly i want to proxy all requests without EAP to another freeradius server. I will have questions to that later :) radtest from localhost an remotehost succeeded. Setting: Win7_Client<-----WLAN----->WAP LinksysWRT54gl<------MPLS-Network over PPPoE----------->FreeRADIUS_proxy(<---------------------------->FreeRADIUS_main) Windows 7 dd-wrt v24 SP2 Ubuntu Server 10.4.2, freeradius 2.1.10 generic 10.73.108.254 internal: 10.0.73.1 external: 213.x.x.x I dont get a clue if the Problem is Windows, Certificates, Network oder simply misconfigured freeradius. certificates: - i build the certs with and without that windows extension OID in server.cnf with make from ../raddb/certs - 2048 bit Windows 7: - installed ca.der as root cert in win7 and configured it for the desired WiFi network - for my eyes no difference in debug logs if validate server cert or not. - unchecked using windows user or domain for auth - EAP comes with PEAP/MSCHAPv2 as default - but the certs are for eap - tls right? WAP: - WPA2 Enterprise with AES no accept packet possible until now - WPA Enterprise with AES results in that 9-times Challenges until accept freeRADIUS: - compiled with installed openSSL dev lib - default config as it comes out of the box, exept: added user bob with cleartext password in users, added the WAP as client in clients.conf, changed default_eap_type = "peap" and private_key_password = "MYSECRET_FROM_SERVER_CERT" in eap.conf configuration and stuff pls look at attached debug.log from running radiusd -X debug.log contains the output of radiusd -X with Access-Requests over WPA-Enterprise. I hope you got a hint for me. Thanks ! Simon FreeRADIUS Version 2.1.10, for host i686-pc-linux-gnu, built on May 12 2011 at 13:56:14 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /usr/local/etc/raddb/radiusd.conf including configuration file /usr/local/etc/raddb/proxy.conf including configuration file /usr/local/etc/raddb/clients.conf including files in directory /usr/local/etc/raddb/modules/ including configuration file /usr/local/etc/raddb/modules/attr_filter including configuration file /usr/local/etc/raddb/modules/exec including configuration file /usr/local/etc/raddb/modules/passwd including configuration file /usr/local/etc/raddb/modules/realm including configuration file /usr/local/etc/raddb/modules/linelog including configuration file /usr/local/etc/raddb/modules/cui including configuration file /usr/local/etc/raddb/modules/chap including configuration file /usr/local/etc/raddb/modules/wimax including configuration file /usr/local/etc/raddb/modules/detail including configuration file /usr/local/etc/raddb/modules/sradutmp including configuration file /usr/local/etc/raddb/modules/mac2vlan including configuration file /usr/local/etc/raddb/modules/pam including configuration file /usr/local/etc/raddb/modules/sqlcounter_expire_on_login including configuration file /usr/local/etc/raddb/modules/krb5 including configuration file /usr/local/etc/raddb/modules/ippool including configuration file /usr/local/etc/raddb/modules/logintime including configuration file /usr/local/etc/raddb/modules/detail.example.com including configuration file /usr/local/etc/raddb/modules/dynamic_clients including configuration file /usr/local/etc/raddb/modules/otp including configuration file /usr/local/etc/raddb/modules/expr including configuration file /usr/local/etc/raddb/modules/counter including configuration file /usr/local/etc/raddb/modules/ldap including configuration file /usr/local/etc/raddb/modules/opendirectory including configuration file /usr/local/etc/raddb/modules/preprocess including configuration file /usr/local/etc/raddb/modules/files including configuration file /usr/local/etc/raddb/modules/always including configuration file /usr/local/etc/raddb/modules/unix including configuration file /usr/local/etc/raddb/modules/expiration including configuration file /usr/local/etc/raddb/modules/ntlm_auth including configuration file /usr/local/etc/raddb/modules/smbpasswd including configuration file /usr/local/etc/raddb/modules/detail.log including configuration file /usr/local/etc/raddb/modules/mschap including configuration file /usr/local/etc/raddb/modules/sql_log including configuration file /usr/local/etc/raddb/modules/digest including configuration file /usr/local/etc/raddb/modules/policy including configuration file /usr/local/etc/raddb/modules/mac2ip including configuration file /usr/local/etc/raddb/modules/acct_unique including configuration file /usr/local/etc/raddb/modules/radutmp including configuration file /usr/local/etc/raddb/modules/etc_group including configuration file /usr/local/etc/raddb/modules/echo including configuration file /usr/local/etc/raddb/modules/attr_rewrite including configuration file /usr/local/etc/raddb/modules/smsotp including configuration file /usr/local/etc/raddb/modules/inner-eap including configuration file /usr/local/etc/raddb/modules/pap including configuration file /usr/local/etc/raddb/modules/checkval including configuration file /usr/local/etc/raddb/modules/perl including configuration file /usr/local/etc/raddb/eap.conf including configuration file /usr/local/etc/raddb/policy.conf including files in directory /usr/local/etc/raddb/sites-enabled/ including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel including configuration file /usr/local/etc/raddb/sites-enabled/default including configuration file /usr/local/etc/raddb/sites-enabled/control-socket main { allow_core_dumps = no } including dictionary file /usr/local/etc/raddb/dictionary main { prefix = "/usr/local" localstatedir = "/usr/local/var" logdir = "/usr/local/var/log/radius" libdir = "/usr/local/lib" radacctdir = "/usr/local/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/usr/local/var/run/radiusd/radiusd.pid" checkrad = "/usr/local/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 require_message_authenticator = yes zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 irt = 2 mrt = 16 mrc = 5 mrd = 30 } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } client 10.73.108.0/24 { require_message_authenticator = no secret = "testing123-3" shortname = "Spot" } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating module "exec" from file /usr/local/etc/raddb/modules/exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating module "expr" from file /usr/local/etc/raddb/modules/expr Module: Linked to module rlm_expiration Module: Instantiating module "expiration" from file /usr/local/etc/raddb/modules/expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating module "logintime" from file /usr/local/etc/raddb/modules/logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server inner-tunnel { # from file /usr/local/etc/raddb/sites-enabled/inner-tunnel modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating module "pap" from file /usr/local/etc/raddb/modules/pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating module "chap" from file /usr/local/etc/raddb/modules/chap Module: Linked to module rlm_mschap Module: Instantiating module "mschap" from file /usr/local/etc/raddb/modules/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no } Module: Linked to module rlm_unix Module: Instantiating module "unix" from file /usr/local/etc/raddb/modules/unix unix { radwtmp = "/usr/local/var/log/radius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating module "eap" from file /usr/local/etc/raddb/eap.conf eap { default_eap_type = "peap" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 4096 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 CA_path = "/usr/local/etc/raddb/certs" pem_file_type = yes private_key_file = "/usr/local/etc/raddb/certs/server.pem" certificate_file = "/usr/local/etc/raddb/certs/server.pem" CA_file = "/usr/local/etc/raddb/certs/ca.pem" private_key_password = "MYSECRET_FROM_SERVER_CERT" dh_file = "/usr/local/etc/raddb/certs/dh" random_file = "/usr/local/etc/raddb/certs/random" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/usr/local/etc/raddb/certs/bootstrap" cache { enable = no lifetime = 24 max_entries = 255 } verify { } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating module "suffix" from file /usr/local/etc/raddb/modules/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating module "files" from file /usr/local/etc/raddb/modules/files files { usersfile = "/usr/local/etc/raddb/users" acctusersfile = "/usr/local/etc/raddb/acct_users" preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users" compat = "no" } Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating module "radutmp" from file /usr/local/etc/raddb/modules/radutmp radutmp { filename = "/usr/local/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating module "attr_filter.access_reject" from file /usr/local/etc/raddb/modules/attr_filter attr_filter attr_filter.access_reject { attrsfile = "/usr/local/etc/raddb/attrs.access_reject" key = "%{User-Name}" } } # modules } # server server { # from file /usr/local/etc/raddb/radiusd.conf modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_digest Module: Instantiating module "digest" from file /usr/local/etc/raddb/modules/digest Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating module "preprocess" from file /usr/local/etc/raddb/modules/preprocess preprocess { huntgroups = "/usr/local/etc/raddb/huntgroups" hints = "/usr/local/etc/raddb/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating module "acct_unique" from file /usr/local/etc/raddb/modules/acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating module "detail" from file /usr/local/etc/raddb/modules/detail detail { detailfile = "/usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Instantiating module "attr_filter.accounting_response" from file /usr/local/etc/raddb/modules/attr_filter attr_filter attr_filter.accounting_response { attrsfile = "/usr/local/etc/raddb/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } listen { type = "control" listen { socket = "/usr/local/var/run/radiusd/radiusd.sock" } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on command file /usr/local/var/run/radiusd/radiusd.sock Listening on authentication address 127.0.0.1 port 18120 as server inner-tunnel Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 10.73.108.254 port 2055, id=0, length=119 User-Name = "bob" NAS-IP-Address = 10.73.108.254 Called-Station-Id = "c2c1c018553e" Calling-Station-Id = "001e654bde20" NAS-Identifier = "c2c1c018553e" NAS-Port = 53 Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x0201000801626f62 Message-Authenticator = 0xb0dac5d5516e083d0cf8f0844b9c1bf7 # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "bob", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 1 length 8 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated [files] users: Matched entry bob at line 1 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] EAP Identity [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 0 to 10.73.108.254 port 2055 EAP-Message = 0x010200061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x100d0b13100f1212d04f6d2a999d2f8b Finished request 0. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.73.108.254 port 2055, id=0, length=246 Cleaning up request 0 ID 0 with timestamp +25 WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0x100d0b13100f1212 did not finish! WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! User-Name = "bob" NAS-IP-Address = 10.73.108.254 Called-Station-Id = "c2c1c018553e" Calling-Station-Id = "001e654bde20" NAS-Identifier = "c2c1c018553e" NAS-Port = 53 Framed-MTU = 1400 State = 0x100d0b13100f1212d04f6d2a999d2f8b NAS-Port-Type = Wireless-802.11 EAP-Message = 0x0202007519800000006b16030100660100006203014dd2abd5dd3cdf77091d87a1310cd27e040a8c9c3b2da1a028d11edfafcde2a8000018002f00350005000ac013c014c009c00a003200380013000401000021ff01000100000000080006000003626f62000a0006000400170018000b00020100 Message-Authenticator = 0xc67efa07682c65e72fc0e82a299a912f # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "bob", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 2 length 117 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 107 [peap] Length Included [peap] eaptls_verify returned 11 [peap] (other): before/accept initialization [peap] TLS_accept: before/accept initialization [peap] <<< TLS 1.0 Handshake [length 0066], ClientHello [peap] TLS_accept: SSLv3 read client hello A [peap] >>> TLS 1.0 Handshake [length 0031], ServerHello [peap] TLS_accept: SSLv3 write server hello A [peap] >>> TLS 1.0 Handshake [length 0804], Certificate [peap] TLS_accept: SSLv3 write certificate A [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [peap] TLS_accept: SSLv3 write server done A [peap] TLS_accept: SSLv3 flush data [peap] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 0 to 10.73.108.254 port 2055 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x864886f70d01010505003081 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x100d0b13110e1212d04f6d2a999d2f8b Finished request 1. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.73.108.254 port 2055, id=0, length=135 Cleaning up request 1 ID 0 with timestamp +25 WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0x100d0b13110e1212 did not finish! WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! User-Name = "bob" NAS-IP-Address = 10.73.108.254 Called-Station-Id = "c2c1c018553e" Calling-Station-Id = "001e654bde20" NAS-Identifier = "c2c1c018553e" NAS-Port = 53 Framed-MTU = 1400 State = 0x100d0b13110e1212d04f6d2a999d2f8b NAS-Port-Type = Wireless-802.11 EAP-Message = 0x020300061900 Message-Authenticator = 0xd8b0178d466cb36842c8ce7f85249787 # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "bob", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 3 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 0 to 10.73.108.254 port 2055 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x7f9e8eff783a5655 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x100d0b1312091212d04f6d2a999d2f8b Finished request 2. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.73.108.254 port 2055, id=0, length=135 Cleaning up request 2 ID 0 with timestamp +25 WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0x100d0b1312091212 did not finish! WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! User-Name = "bob" NAS-IP-Address = 10.73.108.254 Called-Station-Id = "c2c1c018553e" Calling-Station-Id = "001e654bde20" NAS-Identifier = "c2c1c018553e" NAS-Port = 53 Framed-MTU = 1400 State = 0x100d0b1312091212d04f6d2a999d2f8b NAS-Port-Type = Wireless-802.11 EAP-Message = 0x020400061900 Message-Authenticator = 0x9ee76e174f575c845910ce66467f4e67 # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "bob", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 4 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 0 to 10.73.108.254 port 2055 EAP-Message = 0x01050062190029692ee5a7a5fdf4327bcce76583fdd68c78584b3eb346515bf711edbffd111d781f38dc8d8b1d0274d83bb35ecf7f3bdee5f49eb1e7cae44ca1bfbeccb7ce2d94ee34b695fd61bc218b4a647ee316c9f62d9f16030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x100d0b1313081212d04f6d2a999d2f8b Finished request 3. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.73.108.254 port 2055, id=0, length=467 Cleaning up request 3 ID 0 with timestamp +25 WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0x100d0b1313081212 did not finish! WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! User-Name = "bob" NAS-IP-Address = 10.73.108.254 Called-Station-Id = "c2c1c018553e" Calling-Station-Id = "001e654bde20" NAS-Identifier = "c2c1c018553e" NAS-Port = 53 Framed-MTU = 1400 State = 0x100d0b1313081212d04f6d2a999d2f8b NAS-Port-Type = Wireless-802.11 EAP-Message = 0x020501501980000001461603010106100001020100456d29be5bcf8c5933f9d3bd3c44c6fb96e31800b8152fb037b22f7468711dd5c363dc1899e21479b74e22f0033d92776f433d3349a51ab906f6a310e9c4f9133883cc18ce0ea3ffe494bd72c615977720b37a8feecb3e4ef30be1aa1c3b0d76cbebd8124ec360498dc2bc4f658fc4dd79c55fed00541321757f5c77491f2e25d88e04a27d512603b722f219be8d57e2bf0e278a43a6e2f850de7098f0ad66af8187e1975e6c5271421f6084922a9f7cfd1c79351b7a1a86b9c85564a7921735e1c30ab9852eb8325133f158b8ea08adacc2fb3be3b65ca638d3e0913fee8586cb7d5f26c233b2bc EAP-Message = 0xdf557ea01cf812ec5c351a01293350117225d4df7126b3c21403010001011603010030c206bb2cb47e66202309b01974fcc2e6362787b1339b193ac499a7257ec15f8632b17be84198f82eb730dbcc34482cb2 Message-Authenticator = 0x6f9c48fc5889461cead3fb19b17b93ff # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "bob", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 5 length 253 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 326 [peap] Length Included [peap] eaptls_verify returned 11 [peap] <<< TLS 1.0 Handshake [length 0106], ClientKeyExchange [peap] TLS_accept: SSLv3 read client key exchange A [peap] <<< TLS 1.0 ChangeCipherSpec [length 0001] [peap] <<< TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 read finished A [peap] >>> TLS 1.0 ChangeCipherSpec [length 0001] [peap] TLS_accept: SSLv3 write change cipher spec A [peap] >>> TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 write finished A [peap] TLS_accept: SSLv3 flush data [peap] (other): SSL negotiation finished successfully SSL Connection Established [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 0 to 10.73.108.254 port 2055 EAP-Message = 0x01060041190014030100010116030100304f0972823d99581d12bcf661263819e76e1736b7e72545adecd3a27dddb4070adff665ba3372bcf85f0ebc3d5548fa92 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x100d0b13140b1212d04f6d2a999d2f8b Finished request 4. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.73.108.254 port 2055, id=0, length=135 Cleaning up request 4 ID 0 with timestamp +25 WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0x100d0b13140b1212 did not finish! WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! User-Name = "bob" NAS-IP-Address = 10.73.108.254 Called-Station-Id = "c2c1c018553e" Calling-Station-Id = "001e654bde20" NAS-Identifier = "c2c1c018553e" NAS-Port = 53 Framed-MTU = 1400 State = 0x100d0b13140b1212d04f6d2a999d2f8b NAS-Port-Type = Wireless-802.11 EAP-Message = 0x020600061900 Message-Authenticator = 0xb8ab753ff6c3ac7ed2c119f39f0aa60d # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "bob", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 6 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake is finished [peap] eaptls_verify returned 3 [peap] eaptls_process returned 3 [peap] EAPTLS_SUCCESS [peap] Session established. Decoding tunneled attributes. [peap] Peap state TUNNEL ESTABLISHED ++[eap] returns handled Sending Access-Challenge of id 0 to 10.73.108.254 port 2055 EAP-Message = 0x0107002b190017030100205663a730679339a6ed2fd9ba1315fdd48ff2937506934a56719d34a40707fea9 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x100d0b13150a1212d04f6d2a999d2f8b Finished request 5. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.73.108.254 port 2055, id=0, length=172 Cleaning up request 5 ID 0 with timestamp +25 WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0x100d0b13150a1212 did not finish! WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! User-Name = "bob" NAS-IP-Address = 10.73.108.254 Called-Station-Id = "c2c1c018553e" Calling-Station-Id = "001e654bde20" NAS-Identifier = "c2c1c018553e" NAS-Port = 53 Framed-MTU = 1400 State = 0x100d0b13150a1212d04f6d2a999d2f8b NAS-Port-Type = Wireless-802.11 EAP-Message = 0x0207002b190017030100203ce878a12f3ad373255b4dad25ef8b579404aef0cff83c1b595019cfd25ffa57 Message-Authenticator = 0xc7fd9f70162eb96acc1e0836914380d5 # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "bob", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 7 length 43 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state WAITING FOR INNER IDENTITY [peap] Identity - bob [peap] Got inner identity 'bob' [peap] Setting default EAP type for tunneled EAP session. [peap] Got tunneled request EAP-Message = 0x0207000801626f62 server { PEAP: Setting User-Name to bob Sending tunneled request EAP-Message = 0x0207000801626f62 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "bob" server inner-tunnel { # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/inner-tunnel +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "bob", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[control] returns noop [eap] EAP packet type response id 7 length 8 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated [files] users: Matched entry bob at line 1 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /usr/local/etc/raddb/sites-enabled/inner-tunnel +- entering group authenticate {...} [eap] EAP Identity [eap] processing type mschapv2 rlm_eap_mschapv2: Issuing Challenge ++[eap] returns handled } # server inner-tunnel [peap] Got tunneled reply code 11 EAP-Message = 0x0108001d1a0108001810735808091f67266e3b318312610ef9f6626f62 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x79d7d2d179dfc809841915d248ba50cb [peap] Got tunneled reply RADIUS code 11 EAP-Message = 0x0108001d1a0108001810735808091f67266e3b318312610ef9f6626f62 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x79d7d2d179dfc809841915d248ba50cb [peap] Got tunneled Access-Challenge ++[eap] returns handled Sending Access-Challenge of id 0 to 10.73.108.254 port 2055 EAP-Message = 0x0108003b19001703010030c7bc245f1bd0e268faedb4f675e900e969f50b1cab2cae28e412fc96f046480f77cb11bb958621d17eff206da5b5e41f Message-Authenticator = 0x00000000000000000000000000000000 State = 0x100d0b1316051212d04f6d2a999d2f8b Finished request 6. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.73.108.254 port 2055, id=0, length=220 Cleaning up request 6 ID 0 with timestamp +25 WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0x100d0b1316051212 did not finish! WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! User-Name = "bob" NAS-IP-Address = 10.73.108.254 Called-Station-Id = "c2c1c018553e" Calling-Station-Id = "001e654bde20" NAS-Identifier = "c2c1c018553e" NAS-Port = 53 Framed-MTU = 1400 State = 0x100d0b1316051212d04f6d2a999d2f8b NAS-Port-Type = Wireless-802.11 EAP-Message = 0x0208005b190017030100500cedee327c0bce1b3ad6baa3ff0a6ea7e1456894b949eaa73fe799c398d8e34954d290510d12b87f6f1f7ffa4ad3de7acabc77a3e10f1485ffaed4b08356b82d9b963a9d1b202067848e9ee0e27f822e Message-Authenticator = 0x8cd5b2eaf4c495aeb9481477f0cdcce2 # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "bob", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 8 length 91 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state phase2 [peap] EAP type mschapv2 [peap] Got tunneled request EAP-Message = 0x0208003e1a02080039317c9b6f62109be2cde0140c2f589125a3000000000000000004984edd0f4562a917adc13677487434711d466f54cd7cef00626f62 server { PEAP: Setting User-Name to bob Sending tunneled request EAP-Message = 0x0208003e1a02080039317c9b6f62109be2cde0140c2f589125a3000000000000000004984edd0f4562a917adc13677487434711d466f54cd7cef00626f62 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "bob" State = 0x79d7d2d179dfc809841915d248ba50cb server inner-tunnel { # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/inner-tunnel +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "bob", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[control] returns noop [eap] EAP packet type response id 8 length 62 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated [files] users: Matched entry bob at line 1 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /usr/local/etc/raddb/sites-enabled/inner-tunnel +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/mschapv2 [eap] processing type mschapv2 [mschapv2] # Executing group from file /usr/local/etc/raddb/sites-enabled/inner-tunnel [mschapv2] +- entering group MS-CHAP {...} [mschap] Creating challenge hash with username: bob [mschap] Told to do MS-CHAPv2 for bob with NT-Password [mschap] adding MS-CHAPv2 MPPE keys ++[mschap] returns ok MSCHAP Success ++[eap] returns handled } # server inner-tunnel [peap] Got tunneled reply code 11 EAP-Message = 0x010900331a0308002e533d41433435333132443031413636353737333043423832333937304243373643354145353035334445 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x79d7d2d178dec809841915d248ba50cb [peap] Got tunneled reply RADIUS code 11 EAP-Message = 0x010900331a0308002e533d41433435333132443031413636353737333043423832333937304243373643354145353035334445 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x79d7d2d178dec809841915d248ba50cb [peap] Got tunneled Access-Challenge ++[eap] returns handled Sending Access-Challenge of id 0 to 10.73.108.254 port 2055 EAP-Message = 0x0109005b1900170301005044b49efcb171a5490b136e868d52db798d6fcb5351d2cd12c18507423a29d405a5c37f1fe42e04aa9fa50e2847cf8a1ea8ef4ac6a4b8da81aec317e29c1eb05bd835c61aad87796863946c43fc206ffc Message-Authenticator = 0x00000000000000000000000000000000 State = 0x100d0b1317041212d04f6d2a999d2f8b Finished request 7. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.73.108.254 port 2055, id=0, length=172 Cleaning up request 7 ID 0 with timestamp +25 WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0x100d0b1317041212 did not finish! WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! User-Name = "bob" NAS-IP-Address = 10.73.108.254 Called-Station-Id = "c2c1c018553e" Calling-Station-Id = "001e654bde20" NAS-Identifier = "c2c1c018553e" NAS-Port = 53 Framed-MTU = 1400 State = 0x100d0b1317041212d04f6d2a999d2f8b NAS-Port-Type = Wireless-802.11 EAP-Message = 0x0209002b19001703010020838e3d080afcad2883db41d2f509174a48569119f0694117f43034e0f9ac6517 Message-Authenticator = 0x2b1607b034e50ac42eaffe000bf35724 # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "bob", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 9 length 43 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state phase2 [peap] EAP type mschapv2 [peap] Got tunneled request EAP-Message = 0x020900061a03 server { PEAP: Setting User-Name to bob Sending tunneled request EAP-Message = 0x020900061a03 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "bob" State = 0x79d7d2d178dec809841915d248ba50cb server inner-tunnel { # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/inner-tunnel +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "bob", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[control] returns noop [eap] EAP packet type response id 9 length 6 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated [files] users: Matched entry bob at line 1 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /usr/local/etc/raddb/sites-enabled/inner-tunnel +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/mschapv2 [eap] processing type mschapv2 [eap] Freeing handler ++[eap] returns ok WARNING: Empty post-auth section. Using default return values. # Executing section post-auth from file /usr/local/etc/raddb/sites-enabled/inner-tunnel } # server inner-tunnel [peap] Got tunneled reply code 2 MS-MPPE-Encryption-Policy = 0x00000001 MS-MPPE-Encryption-Types = 0x00000006 MS-MPPE-Send-Key = 0x95f34e95115465473d1119a5bb913370 MS-MPPE-Recv-Key = 0x7d3d8d135dfa07b63845d55d36cb563d EAP-Message = 0x03090004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = "bob" [peap] Got tunneled reply RADIUS code 2 MS-MPPE-Encryption-Policy = 0x00000001 MS-MPPE-Encryption-Types = 0x00000006 MS-MPPE-Send-Key = 0x95f34e95115465473d1119a5bb913370 MS-MPPE-Recv-Key = 0x7d3d8d135dfa07b63845d55d36cb563d EAP-Message = 0x03090004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = "bob" [peap] Tunneled authentication was successful. [peap] SUCCESS ++[eap] returns handled Sending Access-Challenge of id 0 to 10.73.108.254 port 2055 EAP-Message = 0x010a002b190017030100202ee07dd0ea67eadd482aaa41b54e77df0bc0d6a3c5ab2241613579541feae813 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x100d0b1318071212d04f6d2a999d2f8b Finished request 8. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.73.108.254 port 2055, id=0, length=172 Cleaning up request 8 ID 0 with timestamp +25 WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0x100d0b1318071212 did not finish! WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! User-Name = "bob" NAS-IP-Address = 10.73.108.254 Called-Station-Id = "c2c1c018553e" Calling-Station-Id = "001e654bde20" NAS-Identifier = "c2c1c018553e" NAS-Port = 53 Framed-MTU = 1400 State = 0x100d0b1318071212d04f6d2a999d2f8b NAS-Port-Type = Wireless-802.11 EAP-Message = 0x020a002b19001703010020dd2bba1c8637183f34912e930a6ea4aabd765737b0d070833ed2ba7f7cd8ea92 Message-Authenticator = 0x843b0013b75780b3b25163a515a8ecb4 # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "bob", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 10 length 43 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state send tlv success [peap] Received EAP-TLV response. [peap] Success [eap] Freeing handler ++[eap] returns ok # Executing section post-auth from file /usr/local/etc/raddb/sites-enabled/default +- entering group post-auth {...} ++[exec] returns noop Sending Access-Accept of id 0 to 10.73.108.254 port 2055 MS-MPPE-Recv-Key = 0x4f13a7a3e0360ac31ae13e261d82ef623a266a784f5b418478729547e2fbab8d MS-MPPE-Send-Key = 0xf2f9ecb0844e975644bb0d44d4b7c92af509807316647edeeabe60eea3a09eb2 EAP-Message = 0x030a0004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = "bob" Finished request 9. Going to the next request Waking up in 4.9 seconds. Cleaning up request 9 ID 0 with timestamp +25 Ready to process requests. Sending Access-Request of id 25 to 127.0.0.1 port 1812 User-Name = "bob" User-Password = "hello" NAS-IP-Address = 213.1xx.xx.xx NAS-Port = 0 rad_recv: Access-Accept packet from host 127.0.0.1 port 1812, id=25, length=20 bob Cleartext-Password := "hello" DEFAULT Framed-Protocol == PPP Framed-Protocol = PPP, Framed-Compression = Van-Jacobson-TCP-IP DEFAULT Hint == "CSLIP" Framed-Protocol = SLIP, Framed-Compression = Van-Jacobson-TCP-IP DEFAULT Hint == "SLIP" Framed-Protocol = SLIP

4 15

multuple ldap freeradius ssid
by seb2020 18 May '11

18 May '11

Hi, I have a question. I already read how to make this, but I'm not sur if it works ! So, what do I want ? I have 2 SSID : students and an other staff. I want to have to ldap instance for authenticating my users. In the /module/ldap, I have set ldap students { some stuff } and ldap staff { some stuff}. But now, what i need to do ? My access point is Aruba. I can use this value "Aruba-Essid-Name" for choosing which instance i need to use. In the /site-avaible/inner-tunel, what i need to do ? Something like that ? if (Aruba-Essid-Name=="students") { students } elsif {staff} Thanks for your reply, and sorry for my english, I'm French ;) -- View this message in context: http://freeradius.1045715.n5.nabble.com/multuple-ldap-freeradius-ssid-tp439… Sent from the FreeRadius - User mailing list archive at Nabble.com.

2 6

No Access-Accept packet just access-request
by John Corps 18 May '11

18 May '11

Hello, I have encountered a very strange issue with my setup. I have mac address filtering setup and working perfect on one server, this server also does other things so I want to migrate it to a new server. All servers are on the same machine running in a vm environment. The server1 does the filering perfect, I can see in packet captures that the wireless client authenticates, the ap sends the access-request and if freeradius finds the users, it sends back the access-accept, i see this on both freeradius debug and also in my packet captures. On server2 that is the exact same config of freeradius etc, the user authenticates with the wifi ap, i can see the access-request in the packet capture, on server2 running tcpdump i see the capture showing it has sent the access-accept packet, but on the laptop i have mirrored as a the port for the ap, i never see the access-accept packet. This is quite confusing I think, but either way, the 2 servers are on the same machine, both configs for freeradius are setup the exact same, packetcaptures on both servers show the exact thing, but server2 does not show as sending the access-accept to the AP on the port that is mirrored from the AP but server1 does. I hope someone can make sense of this and maybe share some insight on to what this could be. There is no rules for the servers on any switches or AP's, changing SERVER1's ip yields the same accept packet etc....I am stumped and don't know what to do here... Thanks.

2 1

rlm_detail issue (bug report + patch).
by Konstantin Chekushin 18 May '11

18 May '11

I think, this module needs a little patch. This will prevent uncontrolled situation, when no space left on device. At this moment, if there are no space left, then rlm_detail doesn't return any error, when he cannot flush buffered information to the file. Client continue sending accounting to the primary server, but server cannot save it. As a result - accounting info can be lost. Just meet this problem and it was solved with this code change. --- rlm_detail.c 2011-05-18 09:37:28.000000000 +0300 +++ rlm_detail.c.new 2011-05-18 09:41:26.000000000 +0300 @@ -185,6 +185,7 @@ int lock_count; struct timeval tv; VALUE_PAIR *pair; + int fpf; struct detail_instance *inst = instance; @@ -463,7 +464,11 @@ RDEBUG2("Released filelock"); } - fclose(outfp); + fpf = fclose(outfp); + if (fpf == EOF) { + radlog(L_ERR,"rlm_detail: cannot close the file! (%s)", strerror(errno)); + return RLM_MODULE_FAIL; + } /* * And everything is fine.

1 0

ldap and xlat
by Frank Dornheim 17 May '11

17 May '11

Dear FreeRADIUS users, i try to migrate my radius setup to LDAP. I use mainly the informations from "Frank Ranner" (http://lists.cistron.nl/pipermail/freeradius-users/2007-September/msg00205.…) Today i have a problem to understand the xlat statement in the "hint" file: DEFAULT Hint = `%{ldap:ldap:///ou=hosts,dc=whatever?radiusHuntgroupName?one?ipHostNumber=%{NAS-IP-Address}}` Can anybody explain that, step by step? (yes i read the rlm_ldap doku file and tryed the mailinglistsearch) Especially the second "ldap"?! Is there a way to get the result? I cannot find any information in the debug log (radiusd -X). Thanks Con

2 1

Correct RegEX format for virtual server in proxy.conf
by Sallee, Stephen (Jake) 17 May '11

17 May '11

I am trying to follow the excellent instructions in the proxy.conf file for setting up a virtual server using realms, however I keep getting an error when I try to start radisud -X telling me that the regex is invalid... here is my realm decleration, what am I doing wrong? realm "~*\\.cru$" { } realm "~*\\.cru\\.umhb\\.edu$" { } realm "~*\\.umhb$" { } realm "~*\\.umhb\\.edu$" { } I know the realms are blank at this time so they do effectively nothing, but one step at a time : ) And here is the error from startup: realm LOCAL { } realm ~*\.cru$ { /etc/raddb/proxy.conf[676]: Invalid regex in realm "~*\.cru$" } # realm ~*\.cru$ Jake Sallee Godfather of Bandwidth Network Engineer University of Mary Hardin-Baylor 900 College St. Belton, Texas 76513 Fone: 254-295-4658 Phax: 254-295-4221

2 2

Re: using freeRadius to authentic a user to access different sources with different configuration
by Abbas Yazdanpanah 17 May '11

17 May '11

ok, I just wanted to get your suggestions if there is any (It seems there is no) and start to implement it. Thanks for your attention. I'll soon ask my specific questions here. Sorry for any disturbance. > On Tue, May 17, 2011 at 4:22 PM, Alan DeKok <aland(a)deployingradius.com> wrote: >> Abbas Yazdanpanah wrote: >>> I've read all the documents(it toke about 2 month for me to read and >>> learn them) and I also implemented freeRadius 2.1 and daloradius using >>> mysql configuration for an ISP(the mentioned system). I'm just an IT >>> guy so my boss who don't have good technical standpoint decided to >>> migrate and I'm in the research phase of migration. That's it. >> >> The issue is that your post was content-free. "Hi, I'm trying to do >> something. Can you help me?" >> >> What do *you* expect us to be able to do with that question? >> >> Decide what you want to do. Use specific words, not vague ones like >> "resources". Use words relevant to RADIUS. >> >> Alan DeKok. >> - >> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html >> >

1 0