- Freeradius-Users - lists.freeradius.org

Freeradius 3.0.20 ldap integration
by Adrian Schwab 06 Dec '21

06 Dec '21

Hello dear Freeradius support, Setup: Ubuntu Server 20.04.3 LTS, Freeradius 3.0.20 so what i'm trying to configure is to set up a freeradius server to authorize and authenticate as user against a ldap server, so users provided in the ldap can access our wifi. when the authorize with ldap is done (6) the auth-type isn't set properly, it should set it to ldap there doesn't it? When I tried to manually set auth-type to ldap to test the behaviour, debug ouptuts that User-Password is required, the ldap user isn't able to read the ldap passwords duo to security reasons, that's why I want to bind as the user which shouldn't have a problem with that does it? Am I doing something wrong with the ldap module or anything else or do I have to have permission to read user passwords in ldap to get what I want? Thanks in advance Here the output: FreeRADIUS Version 3.0.20 Copyright (C) 1999-2019 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/3.0/dictionary including configuration file /etc/freeradius/3.0/radiusd.conf including configuration file /etc/freeradius/3.0/proxy.conf including configuration file /etc/freeradius/3.0/clients.conf including files in directory /etc/freeradius/3.0/mods-enabled/ including configuration file /etc/freeradius/3.0/mods-enabled/chap including configuration file /etc/freeradius/3.0/mods-enabled/sql including configuration file /etc/freeradius/3.0/mods-config/sql/main/mysql/queries.conf including configuration file /etc/freeradius/3.0/mods-enabled/digest including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter including configuration file /etc/freeradius/3.0/mods-enabled/preprocess including configuration file /etc/freeradius/3.0/mods-enabled/logintime including configuration file /etc/freeradius/3.0/mods-enabled/detail.log including configuration file /etc/freeradius/3.0/mods-enabled/unix including configuration file /etc/freeradius/3.0/mods-enabled/utf8 including configuration file /etc/freeradius/3.0/mods-enabled/passwd including configuration file /etc/freeradius/3.0/mods-enabled/detail including configuration file /etc/freeradius/3.0/mods-enabled/echo including configuration file /etc/freeradius/3.0/mods-enabled/soh including configuration file /etc/freeradius/3.0/mods-enabled/linelog including configuration file /etc/freeradius/3.0/mods-enabled/replicate including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp including configuration file /etc/freeradius/3.0/mods-enabled/radutmp including configuration file /etc/freeradius/3.0/mods-enabled/expiration including configuration file /etc/freeradius/3.0/mods-enabled/ldap including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap including configuration file /etc/freeradius/3.0/mods-enabled/pap including configuration file /etc/freeradius/3.0/mods-enabled/always including configuration file /etc/freeradius/3.0/mods-enabled/eap including configuration file /etc/freeradius/3.0/mods-enabled/exec including configuration file /etc/freeradius/3.0/mods-enabled/mschap including configuration file /etc/freeradius/3.0/mods-enabled/unpack including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth including configuration file /etc/freeradius/3.0/mods-enabled/files including configuration file /etc/freeradius/3.0/mods-enabled/expr including configuration file /etc/freeradius/3.0/mods-enabled/realm including files in directory /etc/freeradius/3.0/policy.d/ including configuration file /etc/freeradius/3.0/policy.d/rfc7542 including configuration file /etc/freeradius/3.0/policy.d/operator-name including configuration file /etc/freeradius/3.0/policy.d/dhcp including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/3.0/policy.d/canonicalization including configuration file /etc/freeradius/3.0/policy.d/cui including configuration file /etc/freeradius/3.0/policy.d/control including configuration file /etc/freeradius/3.0/policy.d/debug including configuration file /etc/freeradius/3.0/policy.d/filter including configuration file /etc/freeradius/3.0/policy.d/abfab-tr including configuration file /etc/freeradius/3.0/policy.d/eap including configuration file /etc/freeradius/3.0/policy.d/accounting including files in directory /etc/freeradius/3.0/sites-enabled/ including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel including configuration file /etc/freeradius/3.0/sites-enabled/default main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 192.168.96.0/20 { ipaddr = 192.168.96.0/20 require_message_authenticator = no secret = <<< secret >>> shortname = "bbs1-wlan-unifi" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached systemd watchdog is disabled # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Auth-Type = LDAP # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = eap radiusd: #### Instantiating modules #### modules { # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap # Loaded module rlm_sql # Loading module "sql" from file /etc/freeradius/3.0/mods-enabled/sql sql { driver = "rlm_sql_mysql" server = "localhost" port = 3306 login = "radiusU" password = <<< secret >>> radius_db = "radius" read_groups = yes read_profiles = yes read_clients = no delete_stale_sessions = yes sql_user_name = "%{User-Name}" default_user_profile = "" client_query = "SELECT id, nasname, shortname, type, secret, server FROM nas" authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id" authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id" group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority" simul_count_query = "SELECT COUNT(*) FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" auto_escape = no accounting { reference = "%{tolower:type.%{%{Acct-Status-Type}:-%{Request-Processing-Stage}}.query}" type { accounting-on { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})" } accounting-off { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})" } start { query = "INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, framedipv6address, framedipv6prefix, framedinterfaceid, delegatedipv6prefix) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}', FROM_UNIXTIME(%{integer:Event-Timestamp}), FROM_UNIXTIME(%{integer:Event-Timestamp}), NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{Framed-IPv6-Address}', '%{Framed-IPv6-Prefix}', '%{Framed-Interface-Id}', '%{Delegated-IPv6-Prefix}')" } interim-update { query = "UPDATE radacct SET acctupdatetime = (@acctupdatetime_old:=acctupdatetime), acctupdatetime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctinterval = %{integer:Event-Timestamp} - UNIX_TIMESTAMP(@acctupdatetime_old), framedipaddress = '%{Framed-IP-Address}', framedipv6address = '%{Framed-IPv6-Address}', framedipv6prefix = '%{Framed-IPv6-Prefix}', framedinterfaceid = '%{Framed-Interface-Id}', delegatedipv6prefix = '%{Delegated-IPv6-Prefix}', acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'" } stop { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'" } } } post-auth { reference = ".query" query = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')" } } rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked Creating attribute SQL-Group # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/3.0/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_detail # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8 # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_exec # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients # Loaded module rlm_radutmp # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Loaded module rlm_ldap # Loading module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap ldap { server = "ldaps://10.101.253.11:7636" identity = "uid=bbs1,cn=administrative,cn=users,dc=edukl,dc=net" password = <<< secret >>> sasl { } valuepair_attribute = "yes" user_dn = "LDAP-UserDn" user { scope = "sub" access_positive = yes sasl { } } group { filter = "(objectClass=posixGroup)" scope = "sub" name_attribute = "cn" membership_attribute = "memberOf" cacheable_name = no cacheable_dn = no allow_dangling_group_ref = no } client { filter = "(objectClass=radiusClient)" scope = "sub" base_dn = "ou=bbs1,dc=edukl,dc=net" } profile { } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 10 res_timeout = 10 srv_timelimit = 3 idle = 60 probes = 3 interval = 3 } tls { start_tls = no require_cert = "never" } } Creating attribute LDAP-Group # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files files { filename = "/etc/freeradius/3.0/mods-config/files/authorize" acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy" } # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm realm bangpath { format = "prefix" delimiter = "!" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } instantiate { } # Instantiating module "sql" from file /etc/freeradius/3.0/mods-enabled/sql rlm_sql_mysql: libmysql version: 8.0.27 mysql { tls { tls_required = no check_cert = no check_cert_cn = no } warnings = "auto" } rlm_sql (sql): Attempting to connect to database "radius" rlm_sql (sql): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_sql (sql): Opening additional connection (0), 1 of 32 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 8.0.27-0ubuntu0.20.04.1, protocol version 10 rlm_sql (sql): Opening additional connection (1), 1 of 31 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 8.0.27-0ubuntu0.20.04.1, protocol version 10 rlm_sql (sql): Opening additional connection (2), 1 of 30 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 8.0.27-0ubuntu0.20.04.1, protocol version 10 rlm_sql (sql): Opening additional connection (3), 1 of 29 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 8.0.27-0ubuntu0.20.04.1, protocol version 10 rlm_sql (sql): Opening additional connection (4), 1 of 28 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 8.0.27-0ubuntu0.20.04.1, protocol version 10 # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Instantiating module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap rlm_ldap: libldap vendor: OpenLDAP, version: 20449 accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } rlm_ldap (ldap): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 5 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } Ignoring "idle_timeout = 60", forcing to "idle_timeout = 0" rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldaps://10.101.253.11:7636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots used rlm_ldap (ldap): Connecting to ldaps://10.101.253.11:7636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots used rlm_ldap (ldap): Connecting to ldaps://10.101.253.11:7636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots used rlm_ldap (ldap): Connecting to ldaps://10.101.253.11:7636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots used rlm_ldap (ldap): Connecting to ldaps://10.101.253.11:7636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/3.0/certs" pem_file_type = yes private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key" certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem" ca_file = "/etc/ssl/certs/ca-certificates.crt" private_key_password = <<< secret >>> dh_file = "/etc/freeradius/3.0/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" disable_tlsv1 = yes disable_tlsv1_1 = yes tls_max_version = "1.2" tls_min_version = "1.2" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } Please use tls_min_version and tls_max_version instead of disable_tlsv1 Please use tls_min_version and tls_max_version instead of disable_tlsv1_2 # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/3.0/radiusd.conf } # server server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/3.0/sites-enabled/inner-tunnel:343 } # server inner-tunnel server default { # from file /etc/freeradius/3.0/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on proxy address * port 55887 Listening on proxy address :: port 54338 Ready to process requests (0) Received Access-Request Id 21 from 192.168.110.241:53605 to 10.2.70.180:1812 length 234 (0) User-Name = "bbs1.stdnt30" (0) NAS-IP-Address = 192.168.110.241 (0) NAS-Identifier = "82acb9d89310" (0) Called-Station-Id = "82-AC-B9-D8-93-10:bbs1-test" (0) NAS-Port-Type = Wireless-802.11 (0) Service-Type = Framed-User (0) Calling-Station-Id = "94-65-2D-D5-AD-48" (0) Connect-Info = "CONNECT 0Mbps 802.11b" (0) Acct-Session-Id = "1C01AE984FEFFCB3" (0) Acct-Multi-Session-Id = "8C5A1BECB2BCFAB3" (0) WLAN-Pairwise-Cipher = 1027076 (0) WLAN-Group-Cipher = 1027076 (0) WLAN-AKM-Suite = 1027073 (0) Framed-MTU = 1400 (0) EAP-Message = 0x0293001101626273312e7374646e743330 (0) Message-Authenticator = 0x006d15c03450ac7fff59cb9d2815a016 (0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "bbs1.stdnt30", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 147 length 17 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_md5 to process data (0) eap_md5: Issuing MD5 Challenge (0) eap: Sending EAP Request (code 1) ID 148 length 22 (0) eap: EAP session adding &reply:State = 0xe5734bbfe5e74fe4 (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) Challenge { ... } # empty sub-section is ignored (0) Sent Access-Challenge Id 21 from 10.2.70.180:1812 to 192.168.110.241:53605 length 0 (0) EAP-Message = 0x019400160410bae81ca7a58194de12797a7726124b0c (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0xe5734bbfe5e74fe456540a7ac6d80775 (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 22 from 192.168.110.241:53605 to 10.2.70.180:1812 length 241 (1) User-Name = "bbs1.stdnt30" (1) NAS-IP-Address = 192.168.110.241 (1) NAS-Identifier = "82acb9d89310" (1) Called-Station-Id = "82-AC-B9-D8-93-10:bbs1-test" (1) NAS-Port-Type = Wireless-802.11 (1) Service-Type = Framed-User (1) Calling-Station-Id = "94-65-2D-D5-AD-48" (1) Connect-Info = "CONNECT 0Mbps 802.11b" (1) Acct-Session-Id = "1C01AE984FEFFCB3" (1) Acct-Multi-Session-Id = "8C5A1BECB2BCFAB3" (1) WLAN-Pairwise-Cipher = 1027076 (1) WLAN-Group-Cipher = 1027076 (1) WLAN-AKM-Suite = 1027073 (1) Framed-MTU = 1400 (1) EAP-Message = 0x029400060319 (1) State = 0xe5734bbfe5e74fe456540a7ac6d80775 (1) Message-Authenticator = 0x379ac805ab38ba754978cd64664b2897 (1) session-state: No cached attributes (1) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /(a)\./) { (1) if (&User-Name =~ /(a)\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "bbs1.stdnt30", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 148 length 6 (1) eap: No EAP Start, assuming it's an on-going EAP conversation (1) [eap] = updated (1) [files] = noop (1) [expiration] = noop (1) [logintime] = noop Not doing PAP as Auth-Type is already set. (1) [pap] = noop (1) } # authorize = updated (1) Found Auth-Type = eap (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0xe5734bbfe5e74fe4 (1) eap: Finished EAP session with state 0xe5734bbfe5e74fe4 (1) eap: Previous EAP request found for state 0xe5734bbfe5e74fe4, released from the list (1) eap: Peer sent packet with method EAP NAK (3) (1) eap: Found mutually acceptable type PEAP (25) (1) eap: Calling submodule eap_peap to process data (1) eap_peap: Initiating new TLS session (1) eap_peap: [eaptls start] = request (1) eap: Sending EAP Request (code 1) ID 149 length 6 (1) eap: EAP session adding &reply:State = 0xe5734bbfe4e652e4 (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) Challenge { ... } # empty sub-section is ignored (1) Sent Access-Challenge Id 22 from 10.2.70.180:1812 to 192.168.110.241:53605 length 0 (1) EAP-Message = 0x019500061920 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0xe5734bbfe4e652e456540a7ac6d80775 (1) Finished request Waking up in 4.9 seconds. (2) Received Access-Request Id 23 from 192.168.110.241:53605 to 10.2.70.180:1812 length 376 (2) User-Name = "bbs1.stdnt30" (2) NAS-IP-Address = 192.168.110.241 (2) NAS-Identifier = "82acb9d89310" (2) Called-Station-Id = "82-AC-B9-D8-93-10:bbs1-test" (2) NAS-Port-Type = Wireless-802.11 (2) Service-Type = Framed-User (2) Calling-Station-Id = "94-65-2D-D5-AD-48" (2) Connect-Info = "CONNECT 0Mbps 802.11b" (2) Acct-Session-Id = "1C01AE984FEFFCB3" (2) Acct-Multi-Session-Id = "8C5A1BECB2BCFAB3" (2) WLAN-Pairwise-Cipher = 1027076 (2) WLAN-Group-Cipher = 1027076 (2) WLAN-AKM-Suite = 1027073 (2) Framed-MTU = 1400 (2) EAP-Message = 0x0295008d198000000083160301007e0100007a030304b06cba93ec6e15e2c756dcdc5e9e66726fd77ff99e4ab3cacefe3048bcfdd000001ec02bc02fc02cc030cca9cca8c009c013c00ac014009c009d002f0035000a0100003300170000ff01000100000a00080006001d00170018000b00020100000d00140012040308040401050308050501080606010201 (2) State = 0xe5734bbfe4e652e456540a7ac6d80775 (2) Message-Authenticator = 0x2a3d9fbe4ef225c34fb59f975fa39323 (2) session-state: No cached attributes (2) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /(a)\./) { (2) if (&User-Name =~ /(a)\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "bbs1.stdnt30", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 149 length 141 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = eap (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0xe5734bbfe4e652e4 (2) eap: Finished EAP session with state 0xe5734bbfe4e652e4 (2) eap: Previous EAP request found for state 0xe5734bbfe4e652e4, released from the list (2) eap: Peer sent packet with method EAP PEAP (25) (2) eap: Calling submodule eap_peap to process data (2) eap_peap: Continuing EAP-TLS (2) eap_peap: Peer indicated complete TLS record size will be 131 bytes (2) eap_peap: Got complete TLS record (131 bytes) (2) eap_peap: [eaptls verify] = length included (2) eap_peap: (other): before SSL initialization (2) eap_peap: TLS_accept: before SSL initialization (2) eap_peap: TLS_accept: before SSL initialization (2) eap_peap: <<< recv TLS 1.3 [length 007e] (2) eap_peap: TLS_accept: SSLv3/TLS read client hello (2) eap_peap: >>> send TLS 1.2 [length 003d] (2) eap_peap: TLS_accept: SSLv3/TLS write server hello (2) eap_peap: >>> send TLS 1.2 [length 02de] (2) eap_peap: TLS_accept: SSLv3/TLS write certificate (2) eap_peap: >>> send TLS 1.2 [length 014d] (2) eap_peap: TLS_accept: SSLv3/TLS write key exchange (2) eap_peap: >>> send TLS 1.2 [length 0004] (2) eap_peap: TLS_accept: SSLv3/TLS write server done (2) eap_peap: TLS_accept: Need to read more data: SSLv3/TLS write server done (2) eap_peap: TLS - In Handshake Phase (2) eap_peap: TLS - got 1152 bytes of data (2) eap_peap: [eaptls process] = handled (2) eap: Sending EAP Request (code 1) ID 150 length 1004 (2) eap: EAP session adding &reply:State = 0xe5734bbfe7e552e4 (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) Challenge { ... } # empty sub-section is ignored (2) Sent Access-Challenge Id 23 from 10.2.70.180:1812 to 192.168.110.241:53605 length 0 (2) EAP-Message = 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 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0xe5734bbfe7e552e456540a7ac6d80775 (2) Finished request Waking up in 4.9 seconds. (3) Received Access-Request Id 24 from 192.168.110.241:53605 to 10.2.70.180:1812 length 241 (3) User-Name = "bbs1.stdnt30" (3) NAS-IP-Address = 192.168.110.241 (3) NAS-Identifier = "82acb9d89310" (3) Called-Station-Id = "82-AC-B9-D8-93-10:bbs1-test" (3) NAS-Port-Type = Wireless-802.11 (3) Service-Type = Framed-User (3) Calling-Station-Id = "94-65-2D-D5-AD-48" (3) Connect-Info = "CONNECT 0Mbps 802.11b" (3) Acct-Session-Id = "1C01AE984FEFFCB3" (3) Acct-Multi-Session-Id = "8C5A1BECB2BCFAB3" (3) WLAN-Pairwise-Cipher = 1027076 (3) WLAN-Group-Cipher = 1027076 (3) WLAN-AKM-Suite = 1027073 (3) Framed-MTU = 1400 (3) EAP-Message = 0x029600061900 (3) State = 0xe5734bbfe7e552e456540a7ac6d80775 (3) Message-Authenticator = 0x2be7622a51e1be9f07a2267e0f28e0b4 (3) session-state: No cached attributes (3) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /(a)\./) { (3) if (&User-Name =~ /(a)\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "bbs1.stdnt30", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 150 length 6 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0xe5734bbfe7e552e4 (3) eap: Finished EAP session with state 0xe5734bbfe7e552e4 (3) eap: Previous EAP request found for state 0xe5734bbfe7e552e4, released from the list (3) eap: Peer sent packet with method EAP PEAP (25) (3) eap: Calling submodule eap_peap to process data (3) eap_peap: Continuing EAP-TLS (3) eap_peap: Peer ACKed our handshake fragment (3) eap_peap: [eaptls verify] = request (3) eap_peap: [eaptls process] = handled (3) eap: Sending EAP Request (code 1) ID 151 length 164 (3) eap: EAP session adding &reply:State = 0xe5734bbfe6e452e4 (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) Challenge { ... } # empty sub-section is ignored (3) Sent Access-Challenge Id 24 from 10.2.70.180:1812 to 192.168.110.241:53605 length 0 (3) EAP-Message = 0x019700a41900a8c166ffd96589e658da35cf414b8ae79a4c0efb4e8099f9bf250d55fc29a947d1eb567f5fda868b620509daed59b557b8ac63990fd98a9ff73c030a053b4506a27a041caafdfc3d0b1979990c08e6a80760a3e75e5f24e9d2be38fc30c703b86924aadf4804e6bf8eb8057176810f599c364d3c41a51d459acfbbfc31483d2562df6c0ef12544d437627f3a8d5c7373148ce6d85316030300040e000000 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0xe5734bbfe6e452e456540a7ac6d80775 (3) Finished request Waking up in 4.9 seconds. (4) Received Access-Request Id 25 from 192.168.110.241:53605 to 10.2.70.180:1812 length 371 (4) User-Name = "bbs1.stdnt30" (4) NAS-IP-Address = 192.168.110.241 (4) NAS-Identifier = "82acb9d89310" (4) Called-Station-Id = "82-AC-B9-D8-93-10:bbs1-test" (4) NAS-Port-Type = Wireless-802.11 (4) Service-Type = Framed-User (4) Calling-Station-Id = "94-65-2D-D5-AD-48" (4) Connect-Info = "CONNECT 0Mbps 802.11b" (4) Acct-Session-Id = "1C01AE984FEFFCB3" (4) Acct-Multi-Session-Id = "8C5A1BECB2BCFAB3" (4) WLAN-Pairwise-Cipher = 1027076 (4) WLAN-Group-Cipher = 1027076 (4) WLAN-AKM-Suite = 1027073 (4) Framed-MTU = 1400 (4) EAP-Message = 0x0297008819800000007e160303004610000042410494040cbe7bd17f5a07a82fea2432754594efd31f93071f9a3e915865dff2989cfa91cc8820cfbb03d65b9acb846122155b83aae4b498822eaa1a9e1f447dff4014030300010116030300280000000000000000820ae18acea71fcd494b5fb6e6d028364dafd6421937dd73f3a3f177a284ed41 (4) State = 0xe5734bbfe6e452e456540a7ac6d80775 (4) Message-Authenticator = 0xa1c280c5e73e0c6c5e174676e61d7135 (4) session-state: No cached attributes (4) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (4) authorize { (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /(a)\./) { (4) if (&User-Name =~ /(a)\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "bbs1.stdnt30", looking up realm NULL (4) suffix: No such realm "NULL" (4) [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 151 length 136 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0xe5734bbfe6e452e4 (4) eap: Finished EAP session with state 0xe5734bbfe6e452e4 (4) eap: Previous EAP request found for state 0xe5734bbfe6e452e4, released from the list (4) eap: Peer sent packet with method EAP PEAP (25) (4) eap: Calling submodule eap_peap to process data (4) eap_peap: Continuing EAP-TLS (4) eap_peap: Peer indicated complete TLS record size will be 126 bytes (4) eap_peap: Got complete TLS record (126 bytes) (4) eap_peap: [eaptls verify] = length included (4) eap_peap: TLS_accept: SSLv3/TLS write server done (4) eap_peap: <<< recv TLS 1.2 [length 0046] (4) eap_peap: TLS_accept: SSLv3/TLS read client key exchange (4) eap_peap: TLS_accept: SSLv3/TLS read change cipher spec (4) eap_peap: <<< recv TLS 1.2 [length 0010] (4) eap_peap: TLS_accept: SSLv3/TLS read finished (4) eap_peap: >>> send TLS 1.2 [length 0001] (4) eap_peap: TLS_accept: SSLv3/TLS write change cipher spec (4) eap_peap: >>> send TLS 1.2 [length 0010] (4) eap_peap: TLS_accept: SSLv3/TLS write finished (4) eap_peap: (other): SSL negotiation finished successfully (4) eap_peap: TLS - Connection Established (4) eap_peap: TLS-Session-Cipher-Suite = "ECDHE-RSA-AES128-GCM-SHA256" (4) eap_peap: TLS-Session-Version = "TLS 1.2" (4) eap_peap: TLS - got 51 bytes of data (4) eap_peap: [eaptls process] = handled (4) eap: Sending EAP Request (code 1) ID 152 length 57 (4) eap: EAP session adding &reply:State = 0xe5734bbfe1eb52e4 (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) Challenge { ... } # empty sub-section is ignored (4) session-state: Saving cached attributes (4) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES128-GCM-SHA256" (4) TLS-Session-Version = "TLS 1.2" (4) Sent Access-Challenge Id 25 from 10.2.70.180:1812 to 192.168.110.241:53605 length 0 (4) EAP-Message = 0x01980039190014030300010116030300289d6aaf9b69ce85fc21efbb0637a18b570d7c9da9e68f65659e2a451e8666d179267ba25be35b571c (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0xe5734bbfe1eb52e456540a7ac6d80775 (4) Finished request Waking up in 4.8 seconds. (5) Received Access-Request Id 26 from 192.168.110.241:53605 to 10.2.70.180:1812 length 241 (5) User-Name = "bbs1.stdnt30" (5) NAS-IP-Address = 192.168.110.241 (5) NAS-Identifier = "82acb9d89310" (5) Called-Station-Id = "82-AC-B9-D8-93-10:bbs1-test" (5) NAS-Port-Type = Wireless-802.11 (5) Service-Type = Framed-User (5) Calling-Station-Id = "94-65-2D-D5-AD-48" (5) Connect-Info = "CONNECT 0Mbps 802.11b" (5) Acct-Session-Id = "1C01AE984FEFFCB3" (5) Acct-Multi-Session-Id = "8C5A1BECB2BCFAB3" (5) WLAN-Pairwise-Cipher = 1027076 (5) WLAN-Group-Cipher = 1027076 (5) WLAN-AKM-Suite = 1027073 (5) Framed-MTU = 1400 (5) EAP-Message = 0x029800061900 (5) State = 0xe5734bbfe1eb52e456540a7ac6d80775 (5) Message-Authenticator = 0x036149e7e94815ee3b9609ccaabf3bb4 (5) Restoring &session-state (5) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES128-GCM-SHA256" (5) &session-state:TLS-Session-Version = "TLS 1.2" (5) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /(a)\./) { (5) if (&User-Name =~ /(a)\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) [chap] = noop (5) [mschap] = noop (5) [digest] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "bbs1.stdnt30", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) eap: Peer sent EAP Response (code 2) ID 152 length 6 (5) eap: Continuing tunnel setup (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0xe5734bbfe1eb52e4 (5) eap: Finished EAP session with state 0xe5734bbfe1eb52e4 (5) eap: Previous EAP request found for state 0xe5734bbfe1eb52e4, released from the list (5) eap: Peer sent packet with method EAP PEAP (25) (5) eap: Calling submodule eap_peap to process data (5) eap_peap: Continuing EAP-TLS (5) eap_peap: Peer ACKed our handshake fragment. handshake is finished (5) eap_peap: [eaptls verify] = success (5) eap_peap: [eaptls process] = success (5) eap_peap: Session established. Decoding tunneled attributes (5) eap_peap: PEAP state TUNNEL ESTABLISHED (5) eap: Sending EAP Request (code 1) ID 153 length 40 (5) eap: EAP session adding &reply:State = 0xe5734bbfe0ea52e4 (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (5) Challenge { ... } # empty sub-section is ignored (5) session-state: Saving cached attributes (5) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES128-GCM-SHA256" (5) TLS-Session-Version = "TLS 1.2" (5) Sent Access-Challenge Id 26 from 10.2.70.180:1812 to 192.168.110.241:53605 length 0 (5) EAP-Message = 0x019900281900170303001d9d6aaf9b69ce85fdf0f3692d3083ef25314a156f22ad97bf8cf9ba9e01 (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0xe5734bbfe0ea52e456540a7ac6d80775 (5) Finished request Waking up in 4.8 seconds. (6) Received Access-Request Id 27 from 192.168.110.241:53605 to 10.2.70.180:1812 length 283 (6) User-Name = "bbs1.stdnt30" (6) NAS-IP-Address = 192.168.110.241 (6) NAS-Identifier = "82acb9d89310" (6) Called-Station-Id = "82-AC-B9-D8-93-10:bbs1-test" (6) NAS-Port-Type = Wireless-802.11 (6) Service-Type = Framed-User (6) Calling-Station-Id = "94-65-2D-D5-AD-48" (6) Connect-Info = "CONNECT 0Mbps 802.11b" (6) Acct-Session-Id = "1C01AE984FEFFCB3" (6) Acct-Multi-Session-Id = "8C5A1BECB2BCFAB3" (6) WLAN-Pairwise-Cipher = 1027076 (6) WLAN-Group-Cipher = 1027076 (6) WLAN-AKM-Suite = 1027073 (6) Framed-MTU = 1400 (6) EAP-Message = 0x02990030190017030300250000000000000001afad3d9681c3ac15b06fe7e2a71974348ad8f7c20dc33f494911ac055f (6) State = 0xe5734bbfe0ea52e456540a7ac6d80775 (6) Message-Authenticator = 0x1996c992723c973ef947ac6fb94b4b6e (6) Restoring &session-state (6) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES128-GCM-SHA256" (6) &session-state:TLS-Session-Version = "TLS 1.2" (6) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /(a)\./) { (6) if (&User-Name =~ /(a)\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [preprocess] = ok (6) [chap] = noop (6) [mschap] = noop (6) [digest] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "bbs1.stdnt30", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) eap: Peer sent EAP Response (code 2) ID 153 length 48 (6) eap: Continuing tunnel setup (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (6) authenticate { (6) eap: Expiring EAP session with state 0xe5734bbfe0ea52e4 (6) eap: Finished EAP session with state 0xe5734bbfe0ea52e4 (6) eap: Previous EAP request found for state 0xe5734bbfe0ea52e4, released from the list (6) eap: Peer sent packet with method EAP PEAP (25) (6) eap: Calling submodule eap_peap to process data (6) eap_peap: Continuing EAP-TLS (6) eap_peap: [eaptls verify] = ok (6) eap_peap: Done initial handshake (6) eap_peap: [eaptls process] = ok (6) eap_peap: Session established. Decoding tunneled attributes (6) eap_peap: PEAP state WAITING FOR INNER IDENTITY (6) eap_peap: Identity - bbs1.stdnt30 (6) eap_peap: Got inner identity 'bbs1.stdnt30' (6) eap_peap: Setting default EAP type for tunneled EAP session (6) eap_peap: Got tunneled request (6) eap_peap: EAP-Message = 0x0299001101626273312e7374646e743330 (6) eap_peap: Setting User-Name to bbs1.stdnt30 (6) eap_peap: Sending tunneled request to inner-tunnel (6) eap_peap: EAP-Message = 0x0299001101626273312e7374646e743330 (6) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (6) eap_peap: User-Name = "bbs1.stdnt30" (6) Virtual server inner-tunnel received request (6) EAP-Message = 0x0299001101626273312e7374646e743330 (6) FreeRADIUS-Proxied-To = 127.0.0.1 (6) User-Name = "bbs1.stdnt30" (6) WARNING: Outer and inner identities are the same. User privacy is compromised. (6) server inner-tunnel { (6) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (6) authorize { (6) update control { (6) &Proxy-To-Realm := LOCAL (6) } # update control = noop (6) [files] = noop rlm_ldap (ldap): Closing expired connection (0): Hit lifetime limit rlm_ldap (ldap): Closing expired connection (1): Hit lifetime limit rlm_ldap (ldap): Closing expired connection (2): Hit lifetime limit rlm_ldap (ldap): You probably need to lower "min" rlm_ldap (ldap): Closing expired connection (3): Hit lifetime limit rlm_ldap (ldap): You probably need to lower "min" rlm_ldap (ldap): Closing expired connection (4): Hit lifetime limit rlm_ldap (ldap): You probably need to lower "min" rlm_ldap (ldap): 0 of 0 connections in use. You may need to increase "spare" rlm_ldap (ldap): Opening additional connection (5), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldaps://10.101.253.11:7636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Reserved connection (5) (6) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (6) ldap: --> (uid=bbs1.stdnt30) (6) ldap: Performing search in "ou=bbs1,dc=edukl,dc=net" with filter "(uid=bbs1.stdnt30)", scope "sub" (6) ldap: Waiting for search result... (6) ldap: User object found at DN "uid=bbs1.stdnt30,cn=schueler,cn=users,ou=bbs1,dc=edukl,dc=net" (6) ldap: Processing user attributes rlm_ldap (ldap): Released connection (5) Need 2 more connections to reach min connections (3) rlm_ldap (ldap): Opening additional connection (6), 1 of 31 pending slots used rlm_ldap (ldap): Connecting to ldaps://10.101.253.11:7636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (6) [ldap] = ok (6) [expiration] = noop (6) [logintime] = noop (6) [pap] = noop (6) } # authorize = ok (6) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type = Reject (6) Failed to authenticate the user (6) Using Post-Auth-Type Reject (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (6) Post-Auth-Type REJECT { (6) sql: EXPAND .query (6) sql: --> .query (6) sql: Using query template 'query' rlm_sql (sql): Reserved connection (0) (6) sql: EXPAND %{User-Name} (6) sql: --> bbs1.stdnt30 (6) sql: SQL-User-Name set to 'bbs1.stdnt30' (6) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S') (6) sql: --> INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'bbs1.stdnt30', '', 'Access-Reject', '2021-12-06 09:28:36') (6) sql: Executing query: INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'bbs1.stdnt30', '', 'Access-Reject', '2021-12-06 09:28:36') (6) sql: SQL query returned: success (6) sql: 1 record(s) updated rlm_sql (sql): Released connection (0) Need 5 more connections to reach 10 spares rlm_sql (sql): Opening additional connection (5), 1 of 27 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 8.0.27-0ubuntu0.20.04.1, protocol version 10 (6) [sql] = ok (6) attr_filter.access_reject: EXPAND %{User-Name} (6) attr_filter.access_reject: --> bbs1.stdnt30 (6) attr_filter.access_reject: Matched entry DEFAULT at line 11 (6) [attr_filter.access_reject] = updated (6) update outer.session-state { (6) &Module-Failure-Message := &request:Module-Failure-Message -> 'No Auth-Type found: rejecting the user via Post-Auth-Type = Reject' (6) } # update outer.session-state = noop (6) } # Post-Auth-Type REJECT = updated (6) } # server inner-tunnel (6) Virtual server sending reply (6) eap_peap: Got tunneled reply code 3 (6) eap_peap: Got tunneled reply RADIUS code 3 (6) eap_peap: Tunneled authentication was rejected (6) eap_peap: FAILURE (6) eap: Sending EAP Request (code 1) ID 154 length 46 (6) eap: EAP session adding &reply:State = 0xe5734bbfe3e952e4 (6) [eap] = handled (6) } # authenticate = handled (6) Using Post-Auth-Type Challenge (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (6) Challenge { ... } # empty sub-section is ignored (6) session-state: Saving cached attributes (6) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES128-GCM-SHA256" (6) TLS-Session-Version = "TLS 1.2" (6) Module-Failure-Message := "No Auth-Type found: rejecting the user via Post-Auth-Type = Reject" (6) Sent Access-Challenge Id 27 from 10.2.70.180:1812 to 192.168.110.241:53605 length 0 (6) EAP-Message = 0x019a002e190017030300239d6aaf9b69ce85fee0e39cb920f5f4284670426ccdb7596f6112534879977343f50dbd (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0xe5734bbfe3e952e456540a7ac6d80775 (6) Finished request Waking up in 4.7 seconds. (7) Received Access-Request Id 28 from 192.168.110.241:53605 to 10.2.70.180:1812 length 281 (7) User-Name = "bbs1.stdnt30" (7) NAS-IP-Address = 192.168.110.241 (7) NAS-Identifier = "82acb9d89310" (7) Called-Station-Id = "82-AC-B9-D8-93-10:bbs1-test" (7) NAS-Port-Type = Wireless-802.11 (7) Service-Type = Framed-User (7) Calling-Station-Id = "94-65-2D-D5-AD-48" (7) Connect-Info = "CONNECT 0Mbps 802.11b" (7) Acct-Session-Id = "1C01AE984FEFFCB3" (7) Acct-Multi-Session-Id = "8C5A1BECB2BCFAB3" (7) WLAN-Pairwise-Cipher = 1027076 (7) WLAN-Group-Cipher = 1027076 (7) WLAN-AKM-Suite = 1027073 (7) Framed-MTU = 1400 (7) EAP-Message = 0x029a002e190017030300230000000000000002141507ad933e3726e15a7cd481e1cae0202f9fdd289efd092521eb (7) State = 0xe5734bbfe3e952e456540a7ac6d80775 (7) Message-Authenticator = 0x7f1006d19a70ff76a2b9b1e67252991c (7) Restoring &session-state (7) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES128-GCM-SHA256" (7) &session-state:TLS-Session-Version = "TLS 1.2" (7) &session-state:Module-Failure-Message := "No Auth-Type found: rejecting the user via Post-Auth-Type = Reject" (7) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /(a)\./) { (7) if (&User-Name =~ /(a)\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [preprocess] = ok (7) [chap] = noop (7) [mschap] = noop (7) [digest] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "bbs1.stdnt30", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) eap: Peer sent EAP Response (code 2) ID 154 length 46 (7) eap: Continuing tunnel setup (7) [eap] = ok (7) } # authorize = ok (7) Found Auth-Type = eap (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (7) authenticate { (7) eap: Expiring EAP session with state 0xe5734bbfe3e952e4 (7) eap: Finished EAP session with state 0xe5734bbfe3e952e4 (7) eap: Previous EAP request found for state 0xe5734bbfe3e952e4, released from the list (7) eap: Peer sent packet with method EAP PEAP (25) (7) eap: Calling submodule eap_peap to process data (7) eap_peap: Continuing EAP-TLS (7) eap_peap: [eaptls verify] = ok (7) eap_peap: Done initial handshake (7) eap_peap: [eaptls process] = ok (7) eap_peap: Session established. Decoding tunneled attributes (7) eap_peap: PEAP state send tlv failure (7) eap_peap: Received EAP-TLV response (7) eap_peap: ERROR: The users session was previously rejected: returning reject (again.) (7) eap_peap: This means you need to read the PREVIOUS messages in the debug output (7) eap_peap: to find out the reason why the user was rejected (7) eap_peap: Look for "reject" or "fail". Those earlier messages will tell you (7) eap_peap: what went wrong, and how to fix the problem (7) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module failed (7) eap: Sending EAP Failure (code 4) ID 154 length 4 (7) eap: Failed in EAP select (7) [eap] = invalid (7) } # authenticate = invalid (7) Failed to authenticate the user (7) Using Post-Auth-Type Reject (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (7) Post-Auth-Type REJECT { (7) sql: EXPAND .query (7) sql: --> .query (7) sql: Using query template 'query' rlm_sql (sql): Reserved connection (1) (7) sql: EXPAND %{User-Name} (7) sql: --> bbs1.stdnt30 (7) sql: SQL-User-Name set to 'bbs1.stdnt30' (7) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S') (7) sql: --> INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'bbs1.stdnt30', '', 'Access-Reject', '2021-12-06 09:28:36') (7) sql: Executing query: INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'bbs1.stdnt30', '', 'Access-Reject', '2021-12-06 09:28:36') (7) sql: SQL query returned: success (7) sql: 1 record(s) updated rlm_sql (sql): Released connection (1) (7) [sql] = ok (7) attr_filter.access_reject: EXPAND %{User-Name} (7) attr_filter.access_reject: --> bbs1.stdnt30 (7) attr_filter.access_reject: Matched entry DEFAULT at line 11 (7) [attr_filter.access_reject] = updated (7) [eap] = noop (7) policy remove_reply_message_if_eap { (7) if (&reply:EAP-Message && &reply:Reply-Message) { (7) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (7) else { (7) [noop] = noop (7) } # else = noop (7) } # policy remove_reply_message_if_eap = noop (7) } # Post-Auth-Type REJECT = updated (7) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (7) Sending delayed response (7) Sent Access-Reject Id 28 from 10.2.70.180:1812 to 192.168.110.241:53605 length 44 (7) EAP-Message = 0x049a0004 (7) Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.7 seconds. (0) Cleaning up request packet ID 21 with timestamp +22 (1) Cleaning up request packet ID 22 with timestamp +22 (2) Cleaning up request packet ID 23 with timestamp +22 (3) Cleaning up request packet ID 24 with timestamp +22 (4) Cleaning up request packet ID 25 with timestamp +22 (5) Cleaning up request packet ID 26 with timestamp +22 (6) Cleaning up request packet ID 27 with timestamp +22 (7) Cleaning up request packet ID 28 with timestamp +22 Ready to process requests ####### Here's output when i force auth-type ldap: ####### (6) Received Access-Request Id 206 from 192.168.110.241:54700 to 10.2.70.180:1812 length 283 (6) User-Name = "bbs1.stdnt30" (6) NAS-IP-Address = 192.168.110.241 (6) NAS-Identifier = "82acb9d8930f" (6) Called-Station-Id = "82-AC-B9-D8-93-0F:bbs1-test" (6) NAS-Port-Type = Wireless-802.11 (6) Service-Type = Framed-User (6) Calling-Station-Id = "94-65-2D-D5-AD-48" (6) Connect-Info = "CONNECT 0Mbps 802.11b" (6) Acct-Session-Id = "5A982F18B4CE9E6C" (6) Acct-Multi-Session-Id = "E7798CC994536935" (6) WLAN-Pairwise-Cipher = 1027076 (6) WLAN-Group-Cipher = 1027076 (6) WLAN-AKM-Suite = 1027073 (6) Framed-MTU = 1400 (6) EAP-Message = 0x02b70030190017030300250000000000000001e7e47bf767acb4def8a4945305a39bfc368410655e29d752c07f7b00dc (6) State = 0xb23d18eab78a01c13c7b7a6f4b681d10 (6) Message-Authenticator = 0x8687ff8743671d76f8c7bc2ca934168e (6) Restoring &session-state (6) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES128-GCM-SHA256" (6) &session-state:TLS-Session-Version = "TLS 1.2" (6) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /(a)\./) { (6) if (&User-Name =~ /(a)\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [preprocess] = ok (6) [chap] = noop (6) [mschap] = noop (6) [digest] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "bbs1.stdnt30", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) eap: Peer sent EAP Response (code 2) ID 183 length 48 (6) eap: Continuing tunnel setup (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (6) authenticate { (6) eap: Expiring EAP session with state 0xb23d18eab78a01c1 (6) eap: Finished EAP session with state 0xb23d18eab78a01c1 (6) eap: Previous EAP request found for state 0xb23d18eab78a01c1, released from the list (6) eap: Peer sent packet with method EAP PEAP (25) (6) eap: Calling submodule eap_peap to process data (6) eap_peap: Continuing EAP-TLS (6) eap_peap: [eaptls verify] = ok (6) eap_peap: Done initial handshake (6) eap_peap: [eaptls process] = ok (6) eap_peap: Session established. Decoding tunneled attributes (6) eap_peap: PEAP state WAITING FOR INNER IDENTITY (6) eap_peap: Identity - bbs1.stdnt30 (6) eap_peap: Got inner identity 'bbs1.stdnt30' (6) eap_peap: Setting default EAP type for tunneled EAP session (6) eap_peap: Got tunneled request (6) eap_peap: EAP-Message = 0x02b7001101626273312e7374646e743330 (6) eap_peap: Setting User-Name to bbs1.stdnt30 (6) eap_peap: Sending tunneled request to inner-tunnel (6) eap_peap: EAP-Message = 0x02b7001101626273312e7374646e743330 (6) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (6) eap_peap: User-Name = "bbs1.stdnt30" (6) Virtual server inner-tunnel received request (6) EAP-Message = 0x02b7001101626273312e7374646e743330 (6) FreeRADIUS-Proxied-To = 127.0.0.1 (6) User-Name = "bbs1.stdnt30" (6) WARNING: Outer and inner identities are the same. User privacy is compromised. (6) server inner-tunnel { (6) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (6) authorize { (6) update control { (6) &Proxy-To-Realm := LOCAL (6) } # update control = noop (6) [files] = noop rlm_ldap (ldap): Closing expired connection (0): Hit lifetime limit rlm_ldap (ldap): Closing expired connection (1): Hit lifetime limit rlm_ldap (ldap): Closing expired connection (2): Hit lifetime limit rlm_ldap (ldap): You probably need to lower "min" rlm_ldap (ldap): Closing expired connection (3): Hit lifetime limit rlm_ldap (ldap): You probably need to lower "min" rlm_ldap (ldap): Closing expired connection (4): Hit lifetime limit rlm_ldap (ldap): You probably need to lower "min" rlm_ldap (ldap): 0 of 0 connections in use. You may need to increase "spare" rlm_ldap (ldap): Opening additional connection (5), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldaps://10.101.253.11:7636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Reserved connection (5) (6) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (6) ldap: --> (uid=bbs1.stdnt30) (6) ldap: Performing search in "ou=bbs1,dc=edukl,dc=net" with filter "(uid=bbs1.stdnt30)", scope "sub" (6) ldap: Waiting for search result... (6) ldap: User object found at DN "uid=bbs1.stdnt30,cn=schueler,cn=users,ou=bbs1,dc=edukl,dc=net" (6) ldap: Processing user attributes rlm_ldap (ldap): Released connection (5) Need 2 more connections to reach min connections (3) rlm_ldap (ldap): Opening additional connection (6), 1 of 31 pending slots used rlm_ldap (ldap): Connecting to ldaps://10.101.253.11:7636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (6) [ldap] = ok (6) update { (6) control:Auth-Type := LDAP (6) } # update = noop (6) [expiration] = noop (6) [logintime] = noop (6) [pap] = noop (6) } # authorize = ok (6) Found Auth-Type = LDAP (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (6) Auth-Type LDAP { (6) ldap: WARNING: You have set "Auth-Type := LDAP" somewhere (6) ldap: WARNING: ********************************************* (6) ldap: WARNING: * THAT CONFIGURATION IS WRONG. DELETE IT. (6) ldap: WARNING: * YOU ARE PREVENTING THE SERVER FROM WORKING (6) ldap: WARNING: ********************************************* (6) ldap: ERROR: Attribute "User-Password" is required for authentication (6) [ldap] = invalid (6) } # Auth-Type LDAP = invalid (6) Failed to authenticate the user (6) Using Post-Auth-Type Reject (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (6) Post-Auth-Type REJECT { (6) sql: EXPAND .query (6) sql: --> .query (6) sql: Using query template 'query' rlm_sql (sql): Closing connection (0): Hit idle_timeout, was idle for 642 seconds rlm_sql_mysql: Socket destructor called, closing socket rlm_sql (sql): Closing connection (1): Hit idle_timeout, was idle for 642 seconds rlm_sql_mysql: Socket destructor called, closing socket rlm_sql (sql): Closing connection (2): Hit idle_timeout, was idle for 642 seconds rlm_sql (sql): You probably need to lower "min" rlm_sql_mysql: Socket destructor called, closing socket rlm_sql (sql): Closing connection (3): Hit idle_timeout, was idle for 642 seconds rlm_sql (sql): You probably need to lower "min" rlm_sql_mysql: Socket destructor called, closing socket rlm_sql (sql): Closing connection (4): Hit idle_timeout, was idle for 642 seconds rlm_sql (sql): You probably need to lower "min" rlm_sql_mysql: Socket destructor called, closing socket rlm_sql (sql): 0 of 0 connections in use. You may need to increase "spare" rlm_sql (sql): Opening additional connection (5), 1 of 32 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 8.0.27-0ubuntu0.20.04.1, protocol version 10 rlm_sql (sql): Reserved connection (5) (6) sql: EXPAND %{User-Name} (6) sql: --> bbs1.stdnt30 (6) sql: SQL-User-Name set to 'bbs1.stdnt30' (6) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S') (6) sql: --> INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'bbs1.stdnt30', '', 'Access-Reject', '2021-12-06 10:06:13') (6) sql: Executing query: INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'bbs1.stdnt30', '', 'Access-Reject', '2021-12-06 10:06:13') (6) sql: SQL query returned: success (6) sql: 1 record(s) updated rlm_sql (sql): Released connection (5) Need 2 more connections to reach min connections (3) rlm_sql (sql): Opening additional connection (6), 1 of 31 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 8.0.27-0ubuntu0.20.04.1, protocol version 10 (6) [sql] = ok (6) attr_filter.access_reject: EXPAND %{User-Name} (6) attr_filter.access_reject: --> bbs1.stdnt30 (6) attr_filter.access_reject: Matched entry DEFAULT at line 11 (6) [attr_filter.access_reject] = updated (6) update outer.session-state { (6) &Module-Failure-Message := &request:Module-Failure-Message -> 'ldap: Attribute "User-Password" is required for authentication' (6) } # update outer.session-state = noop (6) } # Post-Auth-Type REJECT = updated (6) } # server inner-tunnel (6) Virtual server sending reply (6) eap_peap: Got tunneled reply code 3 (6) eap_peap: Got tunneled reply RADIUS code 3 (6) eap_peap: Tunneled authentication was rejected (6) eap_peap: FAILURE (6) eap: Sending EAP Request (code 1) ID 184 length 46 (6) eap: EAP session adding &reply:State = 0xb23d18eab48501c1 (6) [eap] = handled (6) } # authenticate = handled (6) Using Post-Auth-Type Challenge (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (6) Challenge { ... } # empty sub-section is ignored (6) session-state: Saving cached attributes (6) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES128-GCM-SHA256" (6) TLS-Session-Version = "TLS 1.2" (6) Module-Failure-Message := "ldap: Attribute \"User-Password\" is required for authentication" (6) Sent Access-Challenge Id 206 from 10.2.70.180:1812 to 192.168.110.241:54700 length 0 (6) EAP-Message = 0x01b8002e19001703030023d6b5c335d022c763f6baac8a0fc4785358b5b07b97f3f1f057e387098f624e77b93628 (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0xb23d18eab48501c13c7b7a6f4b681d10 (6) Finished request Adrian Schwab, Systemadministration Berufsbildende Schule I - Technik - Kaiserslautern Kaiserbergring 29 67657 Kaiserslautern Deutschland Telefon (+49)631-3727-201 Telefax (+49)631-3727-190 E-Mail schwab(a)bbs1-kl.de WWW www.bbs1-kl.de

3 2

Re: Multiple NAS-IP-Address check attributes in FreeRadius 3.x (Alan DeKok)
by Jackie 06 Dec '21

06 Dec '21

Thanks for your help. At 2021-12-04 19:00:01, freeradius-users-request(a)lists.freeradius.org wrote: >Send Freeradius-Users mailing list submissions to > freeradius-users(a)lists.freeradius.org > >To subscribe or unsubscribe via the World Wide Web, visit > http://lists.freeradius.org/mailman/listinfo/freeradius-users >or, via email, send a message with subject or body 'help' to > freeradius-users-request(a)lists.freeradius.org > >You can reach the person managing the list at > freeradius-users-owner(a)lists.freeradius.org > >When replying, please edit your Subject line so it is more specific >than "Re: Contents of Freeradius-Users digest..." > > >Today's Topics: > > 1. Re: Multiple NAS-IP-Address check attributes in FreeRadius > 3.x (Alan DeKok) > > >---------------------------------------------------------------------- > >Message: 1 >Date: Fri, 3 Dec 2021 11:48:22 -0500 >From: Alan DeKok <aland(a)deployingradius.com> >To: FreeRadius users mailing list > <freeradius-users(a)lists.freeradius.org> >Subject: Re: Multiple NAS-IP-Address check attributes in FreeRadius > 3.x >Message-ID: <D3CB53D5-31E9-4C89-9CC7-F6188CD67D66(a)deployingradius.com> >Content-Type: text/plain; charset=us-ascii > >On Dec 3, 2021, at 10:55 AM, Jackie <dark17(a)126.com> wrote: >> In 2.x I can add a attributes in radcheck table use the =~ operator, and a regex xxx.xxx.xxx.1|xxx.xxx.xxx.2 >> ... >> but in 3.x it failed, follow is error message >> >> (1) sql: ERROR: Error parsing value: Failed resolving "=xxx.xxx.xxx.1|=xxx.xxx.xxx.2" to IPv4 address: Name or service not known > > Yes. That functionality was removed in 3.0 > >> what can I do? > > Rewrite the rules in `unlang`. Unfortunately, in order to support new features in v3, it was hard to keep the regex support in SQL. > > Alan DeKok. > > > > > >------------------------------ > >Subject: Digest Footer > >- >List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > > >------------------------------ > >End of Freeradius-Users Digest, Vol 200, Issue 11 >*************************************************

1 0

Re:Freeradius-Users Digest, Vol 200, Issue 11
by Jackie 06 Dec '21

06 Dec '21

Thanks for your help. At 2021-12-04 19:00:01, freeradius-users-request(a)lists.freeradius.org wrote: >Send Freeradius-Users mailing list submissions to > freeradius-users(a)lists.freeradius.org > >To subscribe or unsubscribe via the World Wide Web, visit > http://lists.freeradius.org/mailman/listinfo/freeradius-users >or, via email, send a message with subject or body 'help' to > freeradius-users-request(a)lists.freeradius.org > >You can reach the person managing the list at > freeradius-users-owner(a)lists.freeradius.org > >When replying, please edit your Subject line so it is more specific >than "Re: Contents of Freeradius-Users digest..." > > >Today's Topics: > > 1. Re: Multiple NAS-IP-Address check attributes in FreeRadius > 3.x (Alan DeKok) > > >---------------------------------------------------------------------- > >Message: 1 >Date: Fri, 3 Dec 2021 11:48:22 -0500 >From: Alan DeKok <aland(a)deployingradius.com> >To: FreeRadius users mailing list > <freeradius-users(a)lists.freeradius.org> >Subject: Re: Multiple NAS-IP-Address check attributes in FreeRadius > 3.x >Message-ID: <D3CB53D5-31E9-4C89-9CC7-F6188CD67D66(a)deployingradius.com> >Content-Type: text/plain; charset=us-ascii > >On Dec 3, 2021, at 10:55 AM, Jackie <dark17(a)126.com> wrote: >> In 2.x I can add a attributes in radcheck table use the =~ operator, and a regex xxx.xxx.xxx.1|xxx.xxx.xxx.2 >> ... >> but in 3.x it failed, follow is error message >> >> (1) sql: ERROR: Error parsing value: Failed resolving "=xxx.xxx.xxx.1|=xxx.xxx.xxx.2" to IPv4 address: Name or service not known > > Yes. That functionality was removed in 3.0 > >> what can I do? > > Rewrite the rules in `unlang`. Unfortunately, in order to support new features in v3, it was hard to keep the regex support in SQL. > > Alan DeKok. > > > > > >------------------------------ > >Subject: Digest Footer > >- >List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > > >------------------------------ > >End of Freeradius-Users Digest, Vol 200, Issue 11 >*************************************************

1 0

Multiple NAS-IP-Address check attributes in FreeRadius 3.x
by Jackie 03 Dec '21

03 Dec '21

In 2.x I can add a attributes in radcheck table use the =~ operator, and a regex xxx.xxx.xxx.1|xxx.xxx.xxx.2 insert into radcheck (username,attribute,op,value) values ('username','NAS-IP-Address','=~','xxx.xxx.xxx.1|=xxx.xxx.xxx.2'); but in 3.x it failed, follow is error message (1) sql: ERROR: Error parsing value: Failed resolving "=xxx.xxx.xxx.1|=xxx.xxx.xxx.2" to IPv4 address: Name or service not known (1) sql: ERROR: Error parsing user data from database result (1) sql: ERROR: Error getting check attributes what can I do?

2 1

Custom attribute list
by Lineconnect 03 Dec '21

03 Dec '21

Hi Folks, Is there any way to create a custom attribute list as there are for "request", "config", "session-state", "reply"? New attributes can be created with a dictionary file but is there similar way to create a new list? Background is that I want to use the linelog module and the xlat expansion, e.g. %{pairs:reply:}, but don't want to log EAP stuff and MPPE session keys etc, but it would be nice to have the possibility to use the dynamic expansion of these lists. In a Python module I have tried to return these attributes in a new list ``` reply = { 'reply': (('Reply-Message', 'hello'),), 'customlist': (('Nice-Attribute', 'hi again'),) } return (radiusd.RLM_MODULE_OK, reply) ``` but of course it's not creating a new list magically. Since I didn't find anything in the documentation, the answer is probably no but it doesn't hurt to ask. Regards, Lineconnect

3 4

FreeRADIUS 3.0.25 with a singe backslash in user's password
by Burn Zero 03 Dec '21

03 Dec '21

Hi, I noticed some authentication issues recently and saw that it is due to people using backslash \ in their passwords. If there is a single backslash in the password, then FreeRADIUS adds another backslash to it and hence the authentication is rejected. I have: In LDAP module, update { control:My-Raw-Password += 'User-Password' } Then in authorize, ntlm_auth.authorize { if (!control:Auth-Type && User-Password) { update control { User-Password := "%{string:control:My-Raw-Password}" Auth-Type := ntlm_auth } } } I searched several posts in this mailing list but I couldn't get it. Could you please let me know how to parse the backslash as backslash and not to add any extra backslash? Thank you. Regards, BurnZero

2 1

Freeradius, BYOD and certs
by Chris Bradley 03 Dec '21

03 Dec '21

Hi everyone! We're trying to update our freeradius so that it will work with Android 11+ clients without using the "do not validate" option. What we want to do is allow BYOD devices to connect to our freeradius server (using LDAP authentication) and connect by putting the domain entry in for connecting with an android. Freeradius is working fine with LDAP. Ultimately, I'm trying to put a certificate on the freeradius server so that BYOD clients (android 11+ specifically) can authenticate using LDAP *without* them having to download a certificate from somewhere before attempting the connection to freeradius. >From what I understand, I can't do that with a wildcard certificate or a self-signed one. So, if that's possible, I need some guidance on how to get it accomplished and what kind of cert I need to procure. Thanks! -- This message originated from Bartholomew Consolidated School Corporation, Columbus, Indiana. The message and any attachments may be confidential or privileged and are intended only for the individual or entity identified above as the addressee. This email should not be disseminated, distributed, or copied. If you are not the addressee, or if this message has been addressed to you in error, you are not authorized to read, copy or distribute this message or any attachments; and we ask that you please delete it and notify the sender by return e-mail. Delivery of this message and any attachments to any person other than the intended recipient(s) is not intended in any way to waive confidentiality or a privilege. All personal messages express views only of the sender, which are not to be attributed to Bartholomew Consolidated School Corporation, and may not be copied or distributed without this statement.

5 4

HTTP headers
by Stjepan Roić 02 Dec '21

02 Dec '21

Hi, I'm trying to set up EAP-TTLS wifi auth to REST API endpoint. I started with basic config and have local auth working but stuck on getting Access-Accept from the API. I have set up rest module but struggling to insert HTTP headers into the request. Can't find it in the docs and only previous topic I found is this one: http://lists.freeradius.org/pipermail/freeradius-users/2020-July/098472.html where you suggested how to insert headers in post auth methods. I tried the same in my authenticate just before "rest" but this doesn't work. update control { &REST-HTTP-Header :="secret: 1f215f4a27653bd17ddc54e320a1c61e37949fe5" &REST-HTTP-Header :="uuid: 84ce0574-5074-4b53-9ddc-fcb2c935a1b1" &REST-HTTP-Header :="Content-Type: application/json" } rest What is the correct way to insert HTTP header in the request for authentication sent to external REST server and what syntax should be used for multiple headers (I just multiplied rows here but not sure it should be like that)? Thank you

4 15

R: Re: FREERADIUS WITH MULTIPLE LDAP AUTHENTICATION SOURCES
by Diego Forcella 01 Dec '21

01 Dec '21

> Because you listed both modules in the authorization section as: > > authorize { > ... > domain1 > domain2 > ... > } > > The server doesn't know that the "domain1" module is for domain1.com. You have to tell it. You are right, i've listed both , not in authorize section but under authenticate section > You can do regular expression matches on the User-Name: > > if (User-Name =~ /(a)domain1.com/) { > domain1 > } > elsif (User-Name =~ /(a)domain2.com/) { > domain2 > } With your suggestion I tried radtest and works correctly, I then modified using (Realm == domain1) elseif (Realm ==domain2) and it works also in this way, thank you very much for your help I've another problem now, I need to use this with a captive portal that support only chap or ms-chapv2 and when a user try to login to captive portal configured with chap in freeradius log I have the error chap: ERROR: &control:Cleartext-Password is required for authentication or, if I set ms-chapv2 in captive portal, the error is (1) mschap: WARNING: No Cleartext-Password configured. Cannot create NT-Password (1) mschap: Creating challenge hash with username: xxx(a)xxx.com (1) mschap: Client is using MS-CHAPv2 (1) mschap: ERROR: FAILED: No NT/LM-Password. Cannot perform authentication (1) mschap: ERROR: MS-CHAP2-Response is incorrect It's possible to have chap (or ms-chapv2) and ldap working in freeradius? Thank's again for the support ------------------------------ INFORMATIVA PRIVACY (Reg.UE 2016/679 e D.Lgs.196/2003) Questa email ed i suoi eventuali allegati sono da considerarsi materiale riservato e di proprietà della scrivente società. Nel caso venisse ricevuta per errore non deve essere divulgata, copiata o distribuita per alcuna ragione. Le comunicazioni che transitano attraverso il presente indirizzo di posta elettronica hanno carattere e finalità prettamente lavorative, pertanto potranno essere conosciute all’interno dell’organizzazione aziendale. Qualsiasi dato personale sarà comunque trattato in conformità alle vigenti normative in materia di privacy e protezione dei dati personali. A tale riguardo potete esercitare tutti i diritti previsti dalla legge semplicemente rispondendo alla presente ed esplicitando la vostra richiesta. Maggiori info in materia di privacy: https://www.c2group.it/policy-privacy

2 5

Separating RADIUS Authentication and Accounting functionality
by Network RADIUS 01 Dec '21

01 Dec '21

** Why you should separate RADIUS Authentication and Accounting functionality (sometimes) --------------------------------------- Many ISP networks have Authentication and Accounting handled by the same databases. This configuration works for many situations, especially small and low-load systems. There are times, however, when it is beneficial to separate the functions of Authentication and Accounting. Doing so can increase performance, and scalability. Accounting requests can slow down authentication ISP customers expect to be able to access the network quickly and reliably. To provide a good customer experience, ISPs need the Authentication and Authorization functions to be extremely responsive to user requests. However, Accounting queries to do monthly billing statements can have an enormous impact if they are competing for resources with the Authentication queries. The solution here is to split the functionality in two. We recommend that ISPs deploy at least two separate RADIUS servers at each site. There should be a clear division of responsibilities between the servers. Read the full article… https://networkradius.com/articles/2021/02/10/separate-authentication-and-a… <https://networkradius.com/articles/2021/02/10/separate-authentication-and-a…> ** Sign up to get this content directly --------------------------------------------- Want to get these articles in all their HTML glory? Sign up here: http://eepurl.com/hwuWrn <http://eepurl.com/hwuWrn> ** Need RADIUS help? --------------------------------------------- Get commercial support from the team behind FreeRADIUS. https://networkradius.com/request/ <https://networkradius.com/request/> ** What is the relationship between Network RADIUS and FreeRADIUS? ---------------------------------------------- FreeRADIUS is an open source implementation of the RADIUS protocol and was written by Alan DeKok in 1999. Network RADIUS is a private, for-profit company founded by Alan DeKok which provides commercial support for FreeRADIUS. The Network RADIUS team has been the primary contributor to FreeRADIUS for the last 20 years. The FreeRADIUS mailing list, wiki, and documentation are all moderated and maintained by the Network RADIUS team. FreeRADIUS has always been, and will always continue to be, open source. The Network RADIUS team provides commercial support to paying clients, and free product development for the FreeRADIUS community at large. All of our software development for FreeRADIUS is integrated into the Open Source platform, and will always continue to be.

1 0