- Freeradius-Users - lists.freeradius.org

FreeRadius 2.1.8 problem
by Roar Pettersen 16 Apr '10

16 Apr '10

Hi ! We are using FreeRadius 2.1.8 on FreeBSD 8.0-Stable and too often we see that radius daemon just terminates without any message that this : Fri Apr 16 07:39:10 2010 : Auth: Login OK: [sre079@student] (from client localhost port 0 cli 127.0.0.1) Fri Apr 16 07:39:16 2010 : Auth: Login OK: [szukauskaite@sib] (from client localhost port 0 cli 127.0.0.1) Fri Apr 16 07:39:18 2010 : Auth: Login incorrect (Home Server says so): [gno034@student] (from client localhost port 0 cli 127.0.0.1) Fri Apr 16 07:39:18 2010 : Auth: Login incorrect (Home Server says so): [sof065@student] (from client localhost port 0 cli 127.0.0.1) Fri Apr 16 07:39:23 2010 : Info: Exiting normally. We see this problem on more than one radius server, all using FreeRadius 2.1.8, but som are using FreeBSD 8.0 and some are using FreeBSD 7.2/7.3. -- Med vennlig hilsen / Regards; Roar Pettersen Universitetet i Bergen - The University of Bergen http://www.uib.no

2 2

Re: No authenticate method (Auth-Type) configuration found for the request: Rejecting the user
by Ahmed Munir 16 Apr '10

16 Apr '10

Hi, Thanks for replying. I already enabled sql in sites-enabled/default in accounting and authorize section and even in sessions section as well, which is optional, but unfortunately radius is unable to connect with MySQL. Even I can access the MySQL using radius credentials. Kindly advise me what other method radius connection with MySQL. > Date: Thu, 15 Apr 2010 08:59:43 -0400 > From: John Dennis <jdennis(a)redhat.com> > Subject: Re: No authenticate method (Auth-Type) configuration found > for the request: Rejecting the user > To: FreeRadius users mailing list > <freeradius-users(a)lists.freeradius.org> > Cc: Ahmed Munir <ahmedmunir007(a)gmail.com> > Message-ID: <4BC70DBF.90707(a)redhat.com> > Content-Type: text/plain; charset=UTF-8; format=flowed > > On 04/15/2010 01:13 AM, Ahmed Munir wrote: > > Hi, > > > > I installed latest version of it and followed the steps as mentioned in > > the website: > > http://wiki.freeradius.org/SQL_HOWTO. > > > > After configuring basic setup I'm facing i.e. No authenticate method > > (Auth-Type) configuration found for the request: Rejecting the user > > when I run radtest I'm facing error as listed below; > > > > It is further to be added that I'm facing this error when I configure > > FreeRadius with MySQL, but working fine when using "users" file. I even > > configure sql.conf and configure mysql parameters, include sql in > > radius.conf and on sites-available/default I enabled sql on account and > > authorize section as steps mentioned in website above. > > I don't think you've enabled the SQL module or MySQL, I don't see either > anywhere in the instantiate part of the log. I do see you're including > /usr/local/etc/raddb/sql.conf. Is sql uncommented (e.g. enabled) in > /usr/local/etc/raddb/sites-enabled/default? It isn't by default. > > Because as I > > pass radius credentials, I can connect to MySQL. Is there other way to > > check radius connection with MySQL? > > > > Note: Firewall and SELinux has been disabled on my machine. > > > > Please advise how can I resolve this issue. > > > > -- > John Dennis <jdennis(a)redhat.com> > > Looking to carve out IT costs? > www.redhat.com/carveoutcosts/ > > > -- Regards, Ahmed Munir

3 2

IEEE 802.1x EAP-TLS Client Problems
by "Dirk Müller" 16 Apr '10

16 Apr '10

Hi all, I am not able to authenticate a Client running openSUSE 11.2 against my Radius Server. Doing the same with an Ubuntu 9.10 live CD works. successfull authentication radius output: http://paste.debian.net/69138/ Here the radius output when I try to connect via opensuse with KNetworkmanager: http://paste.debian.net/69139/ the KNetworkmanager log says: http://paste.debian.net/69140/ Looks like the server gets not all messages from the client. I tried the same with wpa supplicant: http://paste.debian.net/69142/ and xsupplicant: http://paste.debian.net/69143/ No communication with the RADIUS server happened. I mean I got nothing on the Server side. I don't know what I should do next, I need it working with openSUSE 11.2, switching to ubuntu is no option. The log output does not say much (anything) to me. I hope someone can help me with this. Dirk -- GRATIS für alle GMX-Mitglieder: Die maxdome Movie-FLAT! Jetzt freischalten unter http://portal.gmx.net/de/go/maxdome01

2 1

freeradius2 multiple realms auth off different database types
by ronald higgins 16 Apr '10

16 Apr '10

Greetings freeradius list members, I'm hoping one of the more experienced FR2 users might shed some light on a query I have, historically i've only worked with radiator so i am very much a novice with FR2. Is it possible to auth different realms off different database server types within the same FR2 configuration? ie. apples.com auth's off a mysql db pears.com auth's off Active Directory Regards Ronald

2 1

How to configure radius for EAP-AKA authentication
by you_shunxing 16 Apr '10

16 Apr '10

Hello I would like to test EAP-AKA authentication. So, how to configure radius server for EAP-AKA authentication? Can you guide me? Thanks ysx

3 3

What nastype for Extreme switch?
by Wagner Pereira 16 Apr '10

16 Apr '10

Hi, all. I installed the AAA model Radius on my Extreme's switch and I am already able to log in into it, but I just enter in this device through the non-privileged mode ( > ). I was taking a look at http://linux.die.net/man/5/clients.conf and it says: ---------------------------- nastype The nastype attribute is used to tell the checkrad.pl script which NAS-specific method it should use when checking simultaneous use. The following values are currently recognized: cisco computone livingston max40xx multitech netserver pathras patton portslave tc usrhiper other ---------------------------- Which of these nastype values I must to use for Extreme devices? Thanks. -- Wagner Pereira PoP-SP/RNP - Ponto de Presença da RNP em São Paulo CCE/USP - Centro de Computação Eletrônica da Universidade de São Paulo http://www.pop-sp.rnp.br Tel. (11) 3091-8901

3 3

eap.conf - tls{private_key_password = whatever}
by Peter Carlstedt 15 Apr '10

15 Apr '10

Hello everyone, hope someone can answer me quite fast on this one =) Have tried google it but couldnt find something about it. Since I want to use peap i need to change the line "private_key_password = whatever" in the tls section to my own private key which I set in the server.cnf file which is used for creating the certs. What I wonder is which of the passwords is it that it asks for? The input_password or the output_password in the server.cnf file? I have just tested making certs once before and at that time I didnt know which I should use so I used same password for both input and output. Well now I need to know instead which one I should use since I use different password for input and output =) Hope someone can help. Thanks! /Peter Carlstedt _________________________________________________________________ Your E-mail and More On-the-Go. Get Windows Live Hotmail Free. https://signup.live.com/signup.aspx?id=60969

2 1

No authenticate method (Auth-Type) configuration found for the request: Rejecting the user
by Ahmed Munir 15 Apr '10

15 Apr '10

Hi, I installed latest version of it and followed the steps as mentioned in the website: http://wiki.freeradius.org/SQL_HOWTO. After configuring basic setup I'm facing i.e. No authenticate method (Auth-Type) configuration found for the request: Rejecting the user when I run radtest I'm facing error as listed below; [root@newtest raddb]# radtest sqltest testpwd 127.0.0.1 1812 testing123 Sending Access-Request of id 38 to 127.0.0.1 port 1812 User-Name = "sqltest" User-Password = "testpwd" NAS-IP-Address = 127.0.0.1 NAS-Port = 1812 rad_recv: Access-Reject packet from host 127.0.0.1 port 1812, id=38, length=20 The logs of radiusd -X are listed down below; FreeRADIUS Version 2.1.8, for host i686-pc-linux-gnu, built on Apr 9 2010 at 12:11:15 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /usr/local/etc/raddb/radiusd. conf including configuration file /usr/local/etc/raddb/proxy.conf including configuration file /usr/local/etc/raddb/clients.conf including files in directory /usr/local/etc/raddb/modules/ including configuration file /usr/local/etc/raddb/modules/ldap including configuration file /usr/local/etc/raddb/modules/inner-eap including configuration file /usr/local/etc/raddb/modules/linelog including configuration file /usr/local/etc/raddb/modules/detail including configuration file /usr/local/etc/raddb/modules/exec including configuration file /usr/local/etc/raddb/modules/pap including configuration file /usr/local/etc/raddb/modules/otp including configuration file /usr/local/etc/raddb/modules/smbpasswd including configuration file /usr/local/etc/raddb/modules/mac2ip including configuration file /usr/local/etc/raddb/modules/krb5 including configuration file /usr/local/etc/raddb/modules/detail.log including configuration file /usr/local/etc/raddb/modules/perl including configuration file /usr/local/etc/raddb/modules/attr_rewrite including configuration file /usr/local/etc/raddb/modules/attr_filter including configuration file /usr/local/etc/raddb/modules/policy including configuration file /usr/local/etc/raddb/modules/smsotp including configuration file /usr/local/etc/raddb/modules/counter including configuration file /usr/local/etc/raddb/modules/etc_group including configuration file /usr/local/etc/raddb/modules/ippool including configuration file /usr/local/etc/raddb/modules/mac2vlan including configuration file /usr/local/etc/raddb/modules/digest including configuration file /usr/local/etc/raddb/modules/ntlm_auth including configuration file /usr/local/etc/raddb/modules/passwd including configuration file /usr/local/etc/raddb/modules/sqlcounter_expire_on_login including configuration file /usr/local/etc/raddb/modules/realm including configuration file /usr/local/etc/raddb/modules/always including configuration file /usr/local/etc/raddb/modules/expiration including configuration file /usr/local/etc/raddb/modules/expr including configuration file /usr/local/etc/raddb/modules/mschap including configuration file /usr/local/etc/raddb/modules/preprocess including configuration file /usr/local/etc/raddb/modules/acct_unique including configuration file /usr/local/etc/raddb/modules/pam including configuration file /usr/local/etc/raddb/modules/wimax including configuration file /usr/local/etc/raddb/modules/sql_log including configuration file /usr/local/etc/raddb/modules/files including configuration file /usr/local/etc/raddb/modules/radutmp including configuration file /usr/local/etc/raddb/modules/logintime including configuration file /usr/local/etc/raddb/modules/unix including configuration file /usr/local/etc/raddb/modules/checkval including configuration file /usr/local/etc/raddb/modules/chap including configuration file /usr/local/etc/raddb/modules/echo including configuration file /usr/local/etc/raddb/modules/sradutmp including configuration file /usr/local/etc/raddb/modules/cui including configuration file /usr/local/etc/raddb/modules/detail.example.com including configuration file /usr/local/etc/raddb/eap.conf including configuration file /usr/local/etc/raddb/sql.conf including configuration file /usr/local/etc/raddb/sql/mysql/dialup.conf including configuration file /usr/local/etc/raddb/policy.conf including files in directory /usr/local/etc/raddb/sites-enabled/ including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel including configuration file /usr/local/etc/raddb/sites-enabled/default.orig including configuration file /usr/local/etc/raddb/sites-enabled/control-socket including configuration file /usr/local/etc/raddb/sites-enabled/default main { allow_core_dumps = no } including dictionary file /usr/local/etc/raddb/dictionary main { prefix = "/usr/local" localstatedir = "/usr/local/var" logdir = "/usr/local/var/log/radius" libdir = "/usr/local/lib" radacctdir = "/usr/local/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/usr/local/var/run/radiusd/radiusd.pid" checkrad = "/usr/local/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 require_message_authenticator = no zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 irt = 2 mrt = 16 mrc = 5 mrd = 30 } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" shortname = "newtest" nastype = "other" } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating expr Module: Linked to module rlm_expiration Module: Instantiating expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server inner-tunnel { modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating chap Module: Linked to module rlm_mschap Module: Instantiating mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no } Module: Linked to module rlm_unix Module: Instantiating unix unix { radwtmp = "/usr/local/var/log/radius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 4096 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 pem_file_type = yes private_key_file = "/usr/local/etc/raddb/certs/server.pem" certificate_file = "/usr/local/etc/raddb/certs/server.pem" CA_file = "/usr/local/etc/raddb/certs/ca.pem" private_key_password = "whatever" dh_file = "/usr/local/etc/raddb/certs/dh" random_file = "/usr/local/etc/raddb/certs/random" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/usr/local/etc/raddb/certs/bootstrap" cache { enable = no lifetime = 24 max_entries = 255 } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating suffix realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating files files { usersfile = "/usr/local/etc/raddb/users" acctusersfile = "/usr/local/etc/raddb/acct_users" preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users" compat = "no" } Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating radutmp radutmp { filename = "/usr/local/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating attr_filter.access_reject attr_filter attr_filter.access_reject { attrsfile = "/usr/local/etc/raddb/attrs.access_reject" key = "%{User-Name}" } } # modules } # server server { modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating preprocess preprocess { huntgroups = "/usr/local/etc/raddb/huntgroups" hints = "/usr/local/etc/raddb/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating detail detail { detailfile = "/usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Instantiating attr_filter.accounting_response attr_filter attr_filter.accounting_response { attrsfile = "/usr/local/etc/raddb/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } listen { type = "control" listen { socket = "/usr/local/var/run/radiusd/radiusd.sock" } } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on command file /usr/local/var/run/radiusd/radiusd.sock Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 127.0.0.1 port 34663, id=160, length=59 User-Name = "sqltest" User-Password = "testpwd" NAS-IP-Address = 127.0.0.1 NAS-Port = 1812 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "sqltest", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] No EAP-Message, not doing EAP ++[eap] returns noop ++[unix] returns notfound ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop No authenticate method (Auth-Type) configuration found for the request: Rejecting the user Failed to authenticate the user. Using Post-Auth-Type Reject +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> sqltest attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 0 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 0 Sending Access-Reject of id 160 to 127.0.0.1 port 34663 Waking up in 4.9 seconds. Cleaning up request 0 ID 160 with timestamp +6 Ready to process requests. It is further to be added that I'm facing this error when I configure FreeRadius with MySQL, but working fine when using "users" file. I even configure sql.conf and configure mysql parameters, include sql in radius.conf and on sites-available/default I enabled sql on account and authorize section as steps mentioned in website above. Because as I pass radius credentials, I can connect to MySQL. Is there other way to check radius connection with MySQL? Note: Firewall and SELinux has been disabled on my machine. Please advise how can I resolve this issue. -- Regards, Ahmed Munir

2 1

Freeradius With EAP-TTLS-LDAP and EAP-PEAP-AD
by Nathan McDavit-Van Fleet 14 Apr '10

14 Apr '10

Hello, I'm trying to get Freeradius 2.1.7 working on Redhat. I had previously gotten PEAP working with ntlm_auth using the walk-through on deployingradius.com on a Debian machine. However, it was version 2.0.7 so things have changed quite a bit in the config files. In the new walkthrough I noticed that the ntlm_auth definition is supposed to be its own module, even though there is still the commented out example inside the mschap module. The new walkthrough does not mention modifying the mschap module at all so I wonder which place I should have the config. I tried with it just in mschap, just in its own module, and both. So far I have not be successful in enabling the AD feature on my server. I tested ntlm_auth directly and it works perfectly. Samba and everything else is all good, I got TTLS and the users files authenticating well as well (so my cert is good and TLS is good). So it appears as if I'm missing something in my Freeradius configs that specifically has to do with PEAP/MSCHAP/AD. Thanks, -Nathan

3 9

Multiple instances of attribute in tunnelled reply
by sunhualing 14 Apr '10

14 Apr '10

Hello everyone: I am using a freeradius-2.1.8, with eap-ttls mschap v2. I happen to get a problem that some attribute missing in the Access-Accept message, while it appears in the first Access-Challenge message. I still find that those attributes appear tunneled reply , i use the debug mode. Search the mail list , i find that similiar problem appears two years ago, here is the mail. Any suggestion is welcome, thanks a log sunhualing Hi, We formulate our reply inside of the virtual server dealing with EAP and send it back to the outer server. This is the only way I could think of to insert the Inner identity into the Access-Accept. It all works fine... however it seems there's a bug when dealing with multiple instances of the same attribute. For example: users / sql DEFAULT Service-Type == Framed-User, Realm == 'local', SS-Flags =~ "^.1........$" Tunnel-Type = VLAN, Tunnel-Medium-Type = IEEE-802, Tunnel-Private-Group-ID = 603, Reply-Message = "User %{%{Stripped-User-Name}:-%{User-Name}} authenticated for ResNet access on NAS:%{%{NAS-Identifier}:-Uknown NAS} SSID:%{%{Called-Station-SSID}:-none}.", HP-IP-FILTER-RAW = 'deny in 41 from any to any', HP-IP-FILTER-RAW += 'permit in ip from any to 10.0.8.1', HP-IP-FILTER-RAW += 'permit in ip from any to 10.0.8.2', HP-IP-FILTER-RAW += 'permit in ip from any to 10.0.8.3', HP-IP-FILTER-RAW += 'permit in ip from any to 10.0.8.4', HP-IP-FILTER-RAW += 'permit in ip from any to 10.0.8.5', Fall-Through = no Ends up being sent as the response: # server default-inner PEAP: Got tunneled reply RADIUS code 2 Service-Type = Framed-User Framed-MTU = 1480 Framed-Routing = None Framed-Protocol = PPP Framed-Compression = Van-Jacobson-TCP-IP Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "603" Reply-Message = "User ac221 authenticated for ResNet access on NAS:hp-e-engg1-1-dev-8021x-sw1 SSID:none." HP-Ip-Filter-Raw = "deny in 41 from any to any" HP-Ip-Filter-Raw = "permit in ip from any to 10.0.8.1" HP-Ip-Filter-Raw = "permit in ip from any to 10.0.8.2" HP-Ip-Filter-Raw = "permit in ip from any to 10.0.8.3" HP-Ip-Filter-Raw = "permit in ip from any to 10.0.8.4" HP-Ip-Filter-Raw = "permit in ip from any to 10.0.8.5" EAP-Message = 0x03490004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = "ac221" PEAP: Processing from tunneled session code 0x845cb10 2 Service-Type = Framed-User Framed-MTU = 1480 Framed-Routing = None Framed-Protocol = PPP Framed-Compression = Van-Jacobson-TCP-IP Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "603" Reply-Message = "User ac221 authenticated for ResNet access on NAS:hp-e-engg1-1-dev-8021x-sw1 SSID:none." HP-Ip-Filter-Raw = "deny in 41 from any to any" HP-Ip-Filter-Raw = "permit in ip from any to 10.0.8.1" HP-Ip-Filter-Raw = "permit in ip from any to 10.0.8.2" HP-Ip-Filter-Raw = "permit in ip from any to 10.0.8.3" HP-Ip-Filter-Raw = "permit in ip from any to 10.0.8.4" HP-Ip-Filter-Raw = "permit in ip from any to 10.0.8.5" EAP-Message = 0x03490004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = "ac221" PEAP: Tunneled authentication was successful. rlm_eap_peap: SUCCESS Saving tunneled attributes for later So when it's actually used in the Access-Accept packet it appears as: Sending Access-Accept of id 173 to 139.184.8.16 port 1024 Service-Type = Framed-User Framed-MTU = 1480 Framed-Routing = None Framed-Protocol = PPP Framed-Compression = Van-Jacobson-TCP-IP Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "603" HP-Ip-Filter-Raw = "deny in 41 from any to any" User-Name = "ac221(a)sussex.ac.uk" MS-MPPE-Recv-Key = 0xdec383f4a269cb3d8fcf59cd9e351971c3a9a3683a7c245144a0b852634c7a03 MS-MPPE-Send-Key = 0xb9f49bba9f9020deaa745c6ea0e8f5b92e72e2fc5b6465aed4a9231f10edd696 EAP-Message = 0x034a0004 Message-Authenticator = 0x00000000000000000000000000000000 Finished request 9. What's really weird is in the previous rounds of EAP, the attributes retain the += operator, it's only in the one where the EAP-Success message is returned where all the operators are stripped out. Relevant EAP bits: eap { ... ttls { ... copy_request_to_tunnel = yes use_tunneled_reply = yes virtual_server = "default-inner" } } Thanks, Arran

2 4