- Freeradius-Users - lists.freeradius.org

Re: Checkrad and IPv6 NAS IP address
by Fabricio Viana 08 Sep '21

08 Sep '21

Hi Alan! First of all, thanks for the quick response! > Huh? The main FreeRADIUS GitHub repository is at https://github.com/FreeRADIUS/freeradius-server/ It's pointed to from http://freeradius.org. > I don't recommend looking at third-party repositories for FreeRADIUS. They are many years out of date. I had so many tabs open in my browser that I didn't even realize I wasn't in the correct repository! Sorry for this mistake. > Patch rlm_sql.c to accept IPv6 addresses. This requires code changes. I'll take a look. > Alan DeKok Unfortunately I can't help in this regard, as I don't know the C language... But thanks again for your willingness to check what can be done. I will be looking forward to it! Regards Fabricio Viana

1 0

Re: Networkradius packages for freeradius-3.0.22-1.el7.x86_64.rpm
by Clive Allen 08 Sep '21

08 Sep '21

>>This comment is demeaning, and insulting. As best I can tell, it is *intended* to be demeaning and insulting. Please don't assume you know why I wrote that comment. I absolutely did not write that comment to demean or insult anyone. Anyway, so that anyone else who may experience this issue wants to know the resolution, I will post here. At least there is a record of it then. The URL is stated as "HTTPS://packages.networkradius.com/freeradius-3.0/centos/7/" No matter what I tried I could only ever get it to list 3.0.23. So, I thought, well, may as well try http rather than https and, with using the following two commands it worked: "yum list freeradius-3.0.22*" - it listed back "freeradius-3.0.22-1.el7" "yum install freeradius-3.0.22-1.el7" radiusd -X shows no issues and the version is "3.0.22". At least that clears up the confusion, but not sure why http worked and https did not - maybe a security issue or certs. Anyway, thank you Matthew and Alan for the pointers. I will keep those in mind for future reference. A basic resolution but sometimes the basics are easily missed.

3 2

Re: Networkradius packages for freeradius-3.0.22-1.el7.x86_64.rpm
by Clive Allen 08 Sep '21

08 Sep '21

>>You did post to the list, didn't you? You're asking us for help with our repos. The repos we provide for free. The repos you use to get paid by your customers. Again, I point to the very simple question that could have/should have required a very simple answer of: No, sorry, never seen the issue (or not respond at all)/Yes, here is how I resolved it. >>Then ask RedHat how "yum" works. And I thanked you for that response. It was not a sarcastic "Thank you" it was a genuine thank you. >>Then you misunderstood my point. My point was that it was an option for you. Which should have been pretty clear. No. I understood that is what you were stating, hence, again, my thanks. It is just a process I would like to try and avoid. But I understand there are plenty of documents out there to help with this if I choose to go that way. >>Yeah, that's the typical "I'm insulted" response. You know what the list is about. Asking leading questions means you're not solving technical problems (which IS what the list is about), but you're looking for reasons to be offended. Do you not see the irony in your response? I am never insulted by anyone. Offence/Insult - A discussion for a different group perhaps. >>Nonsense. Saying that means you either haven't read many of the messages here, or you haven't understood them. How is it nonsense? The group is available to either ask a question or it is not. Do you say to any of your students "No question is too stupid"? >>Would you be insulted if someone told you "I'm sure that any meaningless IT work you do could be done by some low-level monkey with some googling and research." As I mentioned above, I thank you for yours and Matthews response. Very much appreciated. No, I would not get insulted. Would not bother me, people can think whatever they want. >>Yes? Then don't say the same thing here. See my answer above. Let's leave it at that. I thank yourself and Matthew for your responses. As I said, it is appreciated and ways to look to move forward (Which I was hoping to avoid hence my question in the first place).

2 1

Re: Networkradius packages for freeradius-3.0.22-1.el7.x86_64.rpm
by Clive Allen 08 Sep '21

08 Sep '21

> I have created the new baseURL with > [1]https://packages.networkradius.com/freeradius-3.0/centos/7/ > and, in fact, if I go the URL sure enough, there is version 3.0.22. > However, again, when I try to list > freeradius (yum list freeradius) I only get 3.0.23 in the listing. If I > try to install via the actual version > name then I get a yum response of "it cannot be found, nothing to do". > This is really frustrating as version 3.0.22 is at the URL, as you > rightly state, but it simply will not > show in any listing. > > I also tried the yum install direct from the URL to bypass the repo > file, with no luck either. I do not > want to go down the manual route of rpm installation as I am not overly > expert with Linux as yet > and will more than likely mess it up. Any further help would be > appreciated. >>i.e. people are paying you to do FreeRADIUS work, but you want us to work for you, for free. >>Hmm... >>a) build 3.0.22 yourself. It isn't difficult. After all, all of the source is online. >>b) download 3.0.22 manually, and manually install it on the customer machines >>c) ask RedHat how yum works. >>When students ask on Stack Overflow how to do their networking assignments, the response is "do your own work". Something similar applies here. >>Alan DeKok. Hi Alan, Since where have I asked for anyone to complete any work for me? I simply asked if anyone had seen this issue before where the baseurl in the repo is correct, the URL for that baseurl shows 3.0.22 as well as many others. When I complete the command yum --showduplicates list freeradius it shows version 3.0.22 in the listing yet when I use yum list and yum install, all that appears to be available is 3.0.23. I do not require any or ask for any help with regarding to building something from scratch. If that is the process I end up having to use then so be it, and as you state, there is plenty of docs online to help with that. It is just a process I do not want to utilise when the yum repo should show 3.0.22 as an available package. I know how yum works and how to build a repo, what I have never completed before is a freeradius + dependencies build from scratch. That is a learnable process. So, the question, put in more simple terms is: "Has anyone seen this issue before and what was the way around it"? If no-one has seen this issue then that is all good too. My assumption was that this mailing group could be utilised to ask such a question. If that is not what this mailing group is about then maybe it should cease, as I am sure the answer to any question asked in this group is resolvable with some googling and research. Thanks Matthew for the help and Alan for the A) B) and C) options. References 1. https://deref-gmx.com/mail/client/8rkjL0zdpEA/dereferrer/?redirectUrl=https…

2 1

Re: Networkradius packages for freeradius-3.0.22-1.el7.x86_64.rpm
by Clive Allen 08 Sep '21

08 Sep '21

On 07/09/2021 21:51, Clive Allen wrote: > I am trying to install networkradius packages for freeradius-3.0.22 and > having no success. > > OS: RHEL7.9 ... > The problem I have is the yum install only finds 3.0.23 --- I know > 3.0.22 is available but I cannot get the repos to find this version for > a yum install. I have the source code but do not wish to proceed down > that route. Has anyone utilised the networkradius packages for > freeradius and if they have, can they point me to how to get 3.0.33 > version of freeradius please? On 07/09/2021 10:23PM, Matthew Newton Wrote: >>There is no version 3.0.33. >>All versions from 3.0.20 onwards are in the repo: [1]>>https://packages.networkradius.com/freeradius-3.0/centos/7/ >>You'll just need to use the correct yum command to tell it which version >>to install (or download and install the RPMs manually). >>But in any case, use 3.0.23-3. There's no reason to use the older >>versions with known bugs. Version 3.0.33 was a typo on my part. It should have read 3.0.22. Under normal circumstances I would simply install 3.0.23 as you suggested, however, we have customers who are utilising 3.0.22 and I need to get the labs set up exactly the same so I can start testing the new configurations they are asking for. I have created the new baseURL with https://packages.networkradius.com/freeradius-3.0/centos/7/ and, in fact, if I go the URL sure enough, there is version 3.0.22. However, again, when I try to list freeradius (yum list freeradius) I only get 3.0.23 in the listing. If I try to install via the actual version name then I get a yum response of "it cannot be found, nothing to do". This is really frustrating as version 3.0.22 is at the URL, as you rightly state, but it simply will not show in any listing. I also tried the yum install direct from the URL to bypass the repo file, with no luck either. I do not want to go down the manual route of rpm installation as I am not overly expert with Linux as yet and will more than likely mess it up. Any further help would be appreciated. References 1. https://deref-gmx.com/mail/client/8rkjL0zdpEA/dereferrer/?redirectUrl=https…

2 1

Networkradius packages for freeradius-3.0.22-1.el7.x86_64.rpm
by Clive Allen 07 Sep '21

07 Sep '21

I am trying to install networkradius packages for freeradius-3.0.22 and having no success. OS: RHEL7.9 I have completed the configuration for the repos that networkradius ask to complete as per below: rpm --import https://ltb-project.org/lib/RPM-GPG-KEY-LTB-project Add the LDAP Toolbox Project Yum/DNF repository: cat <<'EOF' >/etc/yum.repos.d/ltb-project.repo [ltb-project] name=LTB project packages baseurl=https://ltb-project.org/rpm/$releasever/$basearch enabled=1 gpgcheck=1 gpgkey=https://ltb-project.org/lib/RPM-GPG-KEY-LTB-project EOF Import the [1]NetworkRADIUS PGP public key: rpm --import 'https://packages.networkradius.com/pgp/packages%40networkradius.co m' Add the NetworkRADIUS Yum/DNF repository: cat <<'EOF' >/etc/yum.repos.d/networkradius.repo [networkradius] name=NetworkRADIUS-$releasever baseurl=http://packages.networkradius.com/freeradius-3.0/centos/$releasever/ enabled=1 gpgcheck=1 gpgkey=https://packages.networkradius.com/pgp/packages%40networkradius.com EOF The problem I have is the yum install only finds 3.0.23 --- I know 3.0.22 is available but I cannot get the repos to find this version for a yum install. I have the source code but do not wish to proceed down that route. Has anyone utilised the networkradius packages for freeradius and if they have, can they point me to how to get 3.0.33 version of freeradius please? I know this is a simple question but hoping someone can help. Thanks Clive References 1. https://packages.networkradius.com/pgp/packages@networkradius.com

2 1

Android 802.1x PEAP
by Munroe Sollog 07 Sep '21

07 Sep '21

Has anyone had any success getting an android 11 client to connect to a network using PEAP *without* side loading the certificate issuing authority certificate? -- Munroe Sollog (He/Him/His) Network Architect munroe(a)lehigh.edu

3 3

segmentation violation
by Franro Paxton 07 Sep '21

07 Sep '21

Hi All, I need help with the below error freeradius.service: Main process exited, code=killed, status=11/SEGV Yesterday we got alerts that most of our radius servers restarted after some investigation this is what I got, from here I am unable to determine what exactly could have caused this. Any help will be appreciated greatly. [cid:ionlinelogo_dc1aa5e9-efe3-49f2-afa2-1c4588e9cda1.png] Franro Paxton Junior Systems Engineer iONLINE ISP (PTY) LTD - RSA P: 0861466546 M: W: www.ionlinesp.com<http://www.ionlinesp.com/> E: franro(a)ionlinesp.co.za 14 Stanford Office Park, 12 Bauhinia St, Highveld, Centurion, Gauteng, 0157, South Africa [cid:SocialLink_Facebook_32x32_72be8acc-de25-45ad-8a5a-60441294bdc2.png]<https://www.facebook.com/ionlinesp> [cid:SocialLink_Twitter_32x32_70308233-23bf-4b07-af51-c72b7c46112f.png] <https://twitter.com/ionlinesp> [cid:SocialLink_Linkedin_32x32_6d4c015e-3f16-433b-ac76-9c3e1b7d13a1.png] <https://www.linkedin.com/company/ionline> <https://www.twitter.com/user_name_here> This email and its content are subjected to iONLINE's disclaimer<https://www.ionlinesp.com/email-disclaimer/>.

3 6

Re: Checkrad and IPv6 NAS IP address
by Fabricio Viana 07 Sep '21

07 Sep '21

> I've pushed some changes to the v3.0.x branch on GitHub. IPv6 should now now work for checkrad. > Alan DeKok. Hello Alan, how are you? I have tested the changes. Now it's giving the following message: (0) sql: Executing select query: SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = 'joseph.test' AND acctstoptime IS NULL (0) sql: Cannot parse '2804:444:1:1::2' as an IPv4 or an IPv6 address My checkrad script is still not being called. Below is the Access-Request package and the freeradius -X command output. Could you help please? Thank you very much! Ready to process requests (0) Received Access-Request Id 226 from [2804:444:1:1::2]:38160 to [2600:4a00::f132:91a4:f567:34fd]:1812 length 185 (0) Service-Type = Framed-User (0) Framed-Protocol = PPP (0) NAS-Port = 15813570 (0) NAS-Port-Type = Ethernet (0) User-Name = "joseph.test" (0) Calling-Station-Id = "AA:BB:B6:41:33:AA" (0) Called-Station-Id = "pppoe-server-olt02" (0) NAS-Port-Id = "ether3.501-PPPoE-OLT02" (0) CHAP-Challenge = 0xbf7355183b43c689086a9cc5cb893663 (0) CHAP-Password = 0x01e654618e3015a04368013f201f9c0fe6 (0) NAS-Identifier = "R1.ITU" (0) NAS-IPv6-Address = 2804:444:1:1::2 (0) # Executing section authorize from file /etc/freeradius/sites-enabled/default (0) authorize { (0) if ("%{Cisco-AVPair[*]}" =~ /client-mac-address=(.*)/) { (0) EXPAND %{Cisco-AVPair[*]} (0) --> (0) if ("%{Cisco-AVPair[*]}" =~ /client-mac-address=(.*)/) -> FALSE (0) elsif (ERX-Dhcp-Mac-Addr =~ /^([a-f0-9][a-f0-9])([a-f0-9][a-f0-9]).([a-f0-9][a-f0-9])([a-f0-9][a-f0-9]).([a-f0-9][a-f0-9])([a-f0-9][a-f0-9])$/) { (0) ERROR: Failed retrieving values required to evaluate condition (0) else { (0) update request { (0) EXPAND %{toupper:%{Calling-Station-Id}} (0) --> AA:BB:B6:41:33:AA (0) Calling-Station-Id := AA:BB:B6:41:33:AA (0) } # update request = noop (0) } # else = noop (0) if (!control:Cleartext-Password){ (0) if (!control:Cleartext-Password) -> TRUE (0) if (!control:Cleartext-Password) { (0) update control { (0) Cleartext-Password := "no_user_found_radiusnet" (0) } # update control = noop (0) } # if (!control:Cleartext-Password) = noop (0) [preprocess] = ok (0) chap: &control:Auth-Type := CHAP (0) [chap] = ok (0) [mschap] = noop (0) eap: No EAP-Message, not doing EAP (0) [eap] = noop (0) sql: EXPAND %{User-Name} (0) sql: --> joseph.test (0) sql: SQL-User-Name set to 'joseph.test' rlm_sql (sql): Reserved connection (1) (0) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id (0) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'joseph.test' ORDER BY id (0) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'joseph.test' ORDER BY id (0) sql: User found in radcheck table (0) sql: Conditional check items matched, merging assignment check items (0) sql: Cleartext-Password := "ellen8858" (0) sql: EXPAND SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id (0) sql: --> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'joseph.test' ORDER BY id (0) sql: Executing select query: SELECT id, username, attribute, value, op FROM radreply WHERE username = 'joseph.test' ORDER BY id (0) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority (0) sql: --> SELECT groupname FROM radusergroup WHERE username = 'joseph.test' ORDER BY priority (0) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = 'joseph.test' ORDER BY priority (0) sql: User found in the group table (0) sql: EXPAND SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id (0) sql: --> SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '2BLO' ORDER BY id (0) sql: Executing select query: SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '2BLO' ORDER BY id (0) sql: Group "2BLO": Conditional check items matched (0) sql: Group "2BLO": Merging assignment check items (0) sql: Simultaneous-Use := 1 (0) sql: EXPAND SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id (0) sql: --> SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '2BLO' ORDER BY id (0) sql: Executing select query: SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '2BLO' ORDER BY id (0) sql: Group "2BLO": Merging reply items (0) sql: Mikrotik-Rate-Limit = "100k/100k" (0) sql: WISPr-Bandwidth-Max-Down = 100000 (0) sql: WISPr-Bandwidth-Max-Up = 100000 (0) sql: Framed-Pool = "pool_bloqueados" (0) sql: Mikrotik-Address-List = "bloqueados" rlm_sql (sql): Released connection (1) Need more connections to reach 10 spares rlm_sql (sql): Opening additional connection (6), 1 of 26 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on 192.0.2.2 via TCP/IP, server version 5.7.18-log, protocol version 10 (0) [sql] = ok (0) pap: WARNING: Auth-Type already set. Not setting to PAP (0) [pap] = noop (0) } # authorize = ok (0) Found Auth-Type = CHAP (0) # Executing group from file /etc/freeradius/sites-enabled/default (0) Auth-Type CHAP { (0) chap: Comparing with "known good" Cleartext-Password (0) chap: CHAP user "joseph.test" authenticated successfully (0) [chap] = ok (0) if (request:Service-Type == Login-User && !request:NAS-Port-Type && !reply:Mikrotik-Group){ (0) if (request:Service-Type == Login-User && !request:NAS-Port-Type && !reply:Mikrotik-Group) -> FALSE (0) if (request:Service-Type == Login-User && request:NAS-Port-Type && reply:Mikrotik-Group){ (0) if (request:Service-Type == Login-User && request:NAS-Port-Type && reply:Mikrotik-Group) -> FALSE (0) if (request:Service-Type == Framed-User && reply:Mikrotik-Group){ (0) if (request:Service-Type == Framed-User && reply:Mikrotik-Group) -> FALSE (0) if (reject && Framed-Protocol == PPP) { (0) if (reject && Framed-Protocol == PPP) -> FALSE (0) if (invalid && Framed-Protocol == PPP) { (0) if (invalid && Framed-Protocol == PPP) -> FALSE (0) } # Auth-Type CHAP = ok (0) # Executing section session from file /etc/freeradius/sites-enabled/default (0) session { (0) sql: EXPAND %{User-Name} (0) sql: --> joseph.test (0) sql: SQL-User-Name set to 'joseph.test' rlm_sql (sql): Reserved connection (2) (0) sql: EXPAND SELECT COUNT(*) FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL (0) sql: --> SELECT COUNT(*) FROM radacct WHERE username = 'joseph.test' AND acctstoptime IS NULL (0) sql: Executing select query: SELECT COUNT(*) FROM radacct WHERE username = 'joseph.test' AND acctstoptime IS NULL (0) sql: EXPAND SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL (0) sql: --> SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = 'joseph.test' AND acctstoptime IS NULL (0) sql: Executing select query: SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = 'joseph.test' AND acctstoptime IS NULL (0) sql: Cannot parse '2804:444:1:1::2' as an IPv4 or an IPv6 address rlm_sql (sql): Released connection (2) (0) [sql] = fail (0) } # session = fail (0) # Executing section post-auth from file /etc/freeradius/sites-enabled/default (0) post-auth { (0) if ("%{Cisco-AVPair[*]}" =~ /client-mac-address=(.*)/) { (0) EXPAND %{Cisco-AVPair[*]} (0) --> (0) if ("%{Cisco-AVPair[*]}" =~ /client-mac-address=(.*)/) -> FALSE (0) elsif (ERX-Dhcp-Mac-Addr =~ /^([a-f0-9][a-f0-9])([a-f0-9][a-f0-9]).([a-f0-9][a-f0-9])([a-f0-9][a-f0-9]).([a-f0-9][a-f0-9])([a-f0-9][a-f0-9])$/) { (0) ERROR: Failed retrieving values required to evaluate condition (0) else { (0) update request { (0) EXPAND %{toupper:%{Calling-Station-Id}} (0) --> AA:BB:B6:41:33:AA (0) Calling-Station-Id := AA:BB:B6:41:33:AA (0) } # update request = noop (0) } # else = noop (0) sqlippool_v4: No Pool-Name defined (0) sqlippool_v4: EXPAND No Pool-Name defined (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name}) (0) sqlippool_v4: --> No Pool-Name defined (did pppoe-server-olt02 cli AA:BB:B6:41:33:AA port 15813570 user joseph.test) (0) [sqlippool_v4] = noop (0) sqlippool_v6: No Pool-Name defined (0) sqlippool_v6: EXPAND No Pool-Name defined (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name}) (0) sqlippool_v6: --> No Pool-Name defined (did pppoe-server-olt02 cli AA:BB:B6:41:33:AA port 15813570 user joseph.test) (0) [sqlippool_v6] = noop (0) update { (0) No attributes updated for RHS &session-state: (0) } # update = noop (0) sql: EXPAND .query (0) sql: --> .query (0) sql: Using query template 'query' rlm_sql (sql): Reserved connection (3) (0) sql: EXPAND %{User-Name} (0) sql: --> joseph.test (0) sql: SQL-User-Name set to 'joseph.test' (0) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate, nasipaddress, callingstationid) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', UTC_TIMESTAMP(), '%{%{NAS-IP-Address}:-%{NAS-IPv6-Address}}', '%{Calling-Station-Id}') (0) sql: --> INSERT INTO radpostauth (username, pass, reply, authdate, nasipaddress, callingstationid) VALUES ( 'joseph.test', '0x01e654618e3015a04368013f201f9c0fe6', 'Access-Accept', UTC_TIMESTAMP(), '2804:444:1:1::2', 'AA:BB:B6:41:33:AA') (0) sql: Executing query: INSERT INTO radpostauth (username, pass, reply, authdate, nasipaddress, callingstationid) VALUES ( 'joseph.test', '0x01e654618e3015a04368013f201f9c0fe6', 'Access-Accept', UTC_TIMESTAMP(), '2804:444:1:1::2', 'AA:BB:B6:41:33:AA') (0) sql: SQL query returned: success (0) sql: 1 record(s) updated rlm_sql (sql): Released connection (3) (0) [sql] = ok (0) [exec] = noop (0) policy remove_reply_message_if_eap { (0) if (&reply:EAP-Message && &reply:Reply-Message) { (0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (0) else { (0) [noop] = noop (0) } # else = noop (0) } # policy remove_reply_message_if_eap = noop (0) } # post-auth = ok (0) Sent Access-Accept Id 226 from [2600:4a00::f132:91a4:f567:34fd]:1812 to [2804:444:1:1::2]:38160 length 0 (0) Mikrotik-Rate-Limit = "100k/100k" (0) WISPr-Bandwidth-Max-Down = 100000 (0) WISPr-Bandwidth-Max-Up = 100000 (0) Framed-Pool = "pool_bloqueados" (0) Mikrotik-Address-List = "bloqueados" (0) Finished request Waking up in 4.9 seconds. FreeRADIUS Version 3.0.24 Copyright (C) 1999-2021 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/dictionary including configuration file /etc/freeradius/radiusd.conf including configuration file /etc/freeradius/proxy.conf including configuration file /etc/freeradius/clients.conf including files in directory /etc/freeradius/mods-enabled/ including configuration file /etc/freeradius/mods-enabled/pap including configuration file /etc/freeradius/mods-enabled/linelog including configuration file /etc/freeradius/mods-enabled/files including configuration file /etc/freeradius/mods-enabled/eap including configuration file /etc/freeradius/mods-enabled/echo including configuration file /etc/freeradius/mods-enabled/unix including configuration file /etc/freeradius/mods-enabled/expiration including configuration file /etc/freeradius/mods-enabled/sqlippool_v4 including configuration file /etc/freeradius/mods-config/sql/ippool/mysql/queries.conf including configuration file /etc/freeradius/mods-enabled/chap including configuration file /etc/freeradius/mods-enabled/utf8 including configuration file /etc/freeradius/mods-enabled/logintime including configuration file /etc/freeradius/mods-enabled/sqlippool including configuration file /etc/freeradius/mods-config/sql/ippool/mysql/queries.conf including configuration file /etc/freeradius/mods-enabled/realm including configuration file /etc/freeradius/mods-enabled/sql including configuration file /etc/freeradius/mods-config/sql/main/mysql/queries.conf including configuration file /etc/freeradius/mods-enabled/radutmp including configuration file /etc/freeradius/mods-enabled/mschap including configuration file /etc/freeradius/mods-enabled/unpack including configuration file /etc/freeradius/mods-enabled/detail.log including configuration file /etc/freeradius/mods-enabled/attr_filter including configuration file /etc/freeradius/mods-enabled/dynamic_clients including configuration file /etc/freeradius/mods-enabled/passwd including configuration file /etc/freeradius/mods-enabled/ddns_exec including configuration file /etc/freeradius/mods-enabled/ntlm_auth including configuration file /etc/freeradius/mods-enabled/preprocess including configuration file /etc/freeradius/mods-enabled/soh including configuration file /etc/freeradius/mods-enabled/sradutmp including configuration file /etc/freeradius/mods-enabled/sqlippool_v6 including configuration file /etc/freeradius/mods-config/sql/ippool/mysql/queries_v6.conf including configuration file /etc/freeradius/mods-enabled/replicate including configuration file /etc/freeradius/mods-enabled/exec including configuration file /etc/freeradius/mods-enabled/cache_eap including configuration file /etc/freeradius/mods-enabled/expr including configuration file /etc/freeradius/mods-enabled/always including configuration file /etc/freeradius/mods-enabled/detail including configuration file /etc/freeradius/mods-enabled/digest including files in directory /etc/freeradius/policy.d/ including configuration file /etc/freeradius/policy.d/canonicalization including configuration file /etc/freeradius/policy.d/eap including configuration file /etc/freeradius/policy.d/debug including configuration file /etc/freeradius/policy.d/operator-name including configuration file /etc/freeradius/policy.d/filter including configuration file /etc/freeradius/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/policy.d/accounting /etc/freeradius/policy.d/accounting[42]: Reference "${IDRADIUSSERVER}" not found /etc/freeradius/policy.d/accounting[54]: Reference "${IDRADIUSSERVER}" not found including configuration file /etc/freeradius/policy.d/abfab-tr including configuration file /etc/freeradius/policy.d/dhcp including configuration file /etc/freeradius/policy.d/cui including configuration file /etc/freeradius/policy.d/control including files in directory /etc/freeradius/sites-enabled/ including configuration file /etc/freeradius/sites-enabled/inner-tunnel including configuration file /etc/freeradius/sites-enabled/default including configuration file /etc/freeradius/freeradius.env including configuration file /etc/freeradius/ddns.env main { security { user = "root" group = "root" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 postauth_client_lost = no pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/var/scriptsradius/callcheckrad.sh" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached systemd watchdog is disabled # Creating Auth-Type = mschap # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/mods-enabled/files files { filename = "/etc/freeradius/mods-config/files/authorize" acctusersfile = "/etc/freeradius/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/mods-config/files/pre-proxy" } # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_exec # Loading module "echo" from file /etc/freeradius/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/mods-enabled/expiration # Loaded module rlm_sqlippool # Loading module "sqlippool_v4" from file /etc/freeradius/mods-enabled/sqlippool_v4 sqlippool sqlippool_v4 { sql_module_instance = "sql" lease_duration = 3600 pool_name = "Pool-Name" default_pool = "main_pool" allocate_begin = "START TRANSACTION" allocate_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE expiry_time <= UTC_TIMESTAMP() - INTERVAL 1 SECOND AND nasipaddress = '%{Nas-IP-Address}'" allocate_clear_timeout = 1 allocate_existing = "" allocate_requested = "" allocate_find = "SELECT framedipaddress FROM radippool WHERE pool_name = '%{control:Pool-Name}' AND (expiry_time < UTC_TIMESTAMP() OR expiry_time IS NULL) AND banned = 0 ORDER BY (username <> '%{User-Name}'), (callingstationid <> '%{Calling-Station-Id}'), expiry_time LIMIT 1 FOR UPDATE" allocate_update = "UPDATE radippool SET nasipaddress = '%{NAS-IP-Address}', pool_key = '%{NAS-Port}', callingstationid = '%{Calling-Station-Id}', username = '%{User-Name}', expiry_time = UTC_TIMESTAMP() + INTERVAL 3600 SECOND WHERE framedipaddress = '%I' AND expiry_time IS NULL" allocate_commit = "COMMIT" pool_check = "SELECT id FROM radippool WHERE pool_name='%{control:Pool-Name}' LIMIT 1" start_begin = "" start_update = "UPDATE radippool SET expiry_time = UTC_TIMESTAMP() + INTERVAL 3600 SECOND WHERE nasipaddress = '%{NAS-IP-Address}' AND pool_key = '%{NAS-Port}' AND username = '%{User-Name}' AND callingstationid = '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'" start_commit = "" alive_begin = "" alive_update = "UPDATE radippool SET expiry_time = UTC_TIMESTAMP() + INTERVAL 3600 SECOND WHERE nasipaddress = '%{Nas-IP-Address}' AND pool_key = '%{NAS-Port}' AND username = '%{User-Name}' AND callingstationid = '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'" alive_commit = "" stop_begin = "" stop_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE nasipaddress = '%{Nas-IP-Address}' AND pool_key = '%{NAS-Port}' AND username = '%{User-Name}' AND callingstationid = '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'" stop_commit = "" on_begin = "" on_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE nasipaddress = '%{Nas-IP-Address}'" on_commit = "" off_begin = "" off_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE nasipaddress = '%{Nas-IP-Address}'" off_commit = "" messages { exists = "Existing IP: %{reply:Framed-IP-Address} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})" success = "Allocated IP: %{reply:Framed-IP-Address} from %{control:Pool-Name} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})" clear = "Released IP %{Framed-IP-Address} (did %{Called-Station-Id} cli %{Calling-Station-Id} user %{User-Name})" failed = "IP Allocation FAILED from %{control:Pool-Name} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})" nopool = "No Pool-Name defined (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})" } } # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/mods-enabled/chap # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/mods-enabled/utf8 # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loading module "sqlippool" from file /etc/freeradius/mods-enabled/sqlippool sqlippool { sql_module_instance = "sql" lease_duration = 3600 pool_name = "Pool-Name" default_pool = "main_pool" ipv6 = yes allocate_begin = "START TRANSACTION" allocate_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE expiry_time <= UTC_TIMESTAMP() - INTERVAL 1 SECOND AND nasipaddress = '%{Nas-IP-Address}'" allocate_clear_timeout = 1 allocate_existing = "" allocate_requested = "" allocate_find = "SELECT framedipaddress FROM radippool WHERE pool_name = '%{control:Pool-Name}' AND (expiry_time < UTC_TIMESTAMP() OR expiry_time IS NULL) AND banned = 0 ORDER BY (username <> '%{User-Name}'), (callingstationid <> '%{Calling-Station-Id}'), expiry_time LIMIT 1 FOR UPDATE" allocate_update = "UPDATE radippool SET nasipaddress = '%{NAS-IP-Address}', pool_key = '%{NAS-Port}', callingstationid = '%{Calling-Station-Id}', username = '%{User-Name}', expiry_time = UTC_TIMESTAMP() + INTERVAL 3600 SECOND WHERE framedipaddress = '%I' AND expiry_time IS NULL" allocate_commit = "COMMIT" pool_check = "SELECT id FROM radippool WHERE pool_name='%{control:Pool-Name}' LIMIT 1" start_begin = "" start_update = "UPDATE radippool SET expiry_time = UTC_TIMESTAMP() + INTERVAL 3600 SECOND WHERE nasipaddress = '%{NAS-IP-Address}' AND pool_key = '%{NAS-Port}' AND username = '%{User-Name}' AND callingstationid = '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'" start_commit = "" alive_begin = "" alive_update = "UPDATE radippool SET expiry_time = UTC_TIMESTAMP() + INTERVAL 3600 SECOND WHERE nasipaddress = '%{Nas-IP-Address}' AND pool_key = '%{NAS-Port}' AND username = '%{User-Name}' AND callingstationid = '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'" alive_commit = "" stop_begin = "" stop_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE nasipaddress = '%{Nas-IP-Address}' AND pool_key = '%{NAS-Port}' AND username = '%{User-Name}' AND callingstationid = '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'" stop_commit = "" on_begin = "" on_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE nasipaddress = '%{Nas-IP-Address}'" on_commit = "" off_begin = "" off_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE nasipaddress = '%{Nas-IP-Address}'" off_commit = "" messages { exists = "Existing IP: %{reply:Framed-IP-Address} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})" success = "Allocated IP: %{reply:Framed-IP-Address} from %{control:Pool-Name} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})" clear = "Released IP %{Framed-IP-Address} (did %{Called-Station-Id} cli %{Calling-Station-Id} user %{User-Name})" failed = "IP Allocation FAILED from %{control:Pool-Name} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})" nopool = "No Pool-Name defined (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})" } } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_sql # Loading module "sql" from file /etc/freeradius/mods-enabled/sql sql { driver = "rlm_sql_mysql" server = "192.0.2.2" port = 3306 login = "radius_user" password = <<< secret >>> radius_db = "radius" read_groups = yes read_profiles = yes read_clients = yes delete_stale_sessions = yes sql_user_name = "%{User-Name}" default_user_profile = "" client_query = "SELECT id, nasname, shortname, type, secret, server FROM nas" authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id" authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id" group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority" simul_count_query = "SELECT COUNT(*) FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" auto_escape = no accounting { reference = "%{tolower:type.%{Acct-Status-Type}.query}" type { accounting-on { query = "UPDATE radacct SET acctstoptime = UTC_TIMESTAMP(), acctsessiontime = UNIX_TIMESTAMP(UTC_TIMESTAMP()) - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{%{NAS-IP-Address}:-%{NAS-IPv6-Address}}' AND acctstarttime <= UTC_TIMESTAMP()" } accounting-off { query = "UPDATE radacct SET acctstoptime = UTC_TIMESTAMP(), acctsessiontime = UNIX_TIMESTAMP(UTC_TIMESTAMP()) - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{%{NAS-IP-Address}:-%{NAS-IPv6-Address}}' AND acctstarttime <= UTC_TIMESTAMP()" } start { query = "INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, framedipv6prefix, delegatedipv6prefix) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{%{NAS-IP-Address}:-%{NAS-IPv6-Address}}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}', UTC_TIMESTAMP(), UTC_TIMESTAMP(), NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{Framed-IPv6-Prefix}', '%{Delegated-IPv6-Prefix}')" } interim-update { query = "UPDATE radacct SET acctupdatetime = (@acctupdatetime_old:=acctupdatetime), acctupdatetime = UTC_TIMESTAMP(), acctinterval = UNIX_TIMESTAMP(UTC_TIMESTAMP()) - UNIX_TIMESTAMP(@acctupdatetime_old), framedipaddress = '%{Framed-IP-Address}', acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', framedipv6prefix = '%{Framed-IPv6-Prefix}', delegatedipv6prefix = '%{Delegated-IPv6-Prefix}', acctstoptime = NULL, nasportid = '%{NAS-Port-Id}', calledstationid = '%{Called-Station-Id}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}' OR AcctUniqueId = '%{Segundo-AcctUnique-Id}' OR AcctUniqueId = '%{Terceiro-AcctUnique-Id}'" } stop { query = "UPDATE radacct SET acctstoptime = UTC_TIMESTAMP(), acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{%{NAS-IP-Address}:-%{NAS-IPv6-Address}}'" } } } post-auth { reference = ".query" query = "INSERT INTO radpostauth (username, pass, reply, authdate, nasipaddress, callingstationid) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', UTC_TIMESTAMP(), '%{%{NAS-IP-Address}:-%{NAS-IPv6-Address}}', '%{Calling-Station-Id}')" } } rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked Creating attribute SQL-Group # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/freeradius/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/mods-enabled/unpack # Loaded module rlm_detail # Loading module "auth_log" from file /etc/freeradius/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/mods-enabled/dynamic_clients # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loading module "ddns_del" from file /etc/freeradius/mods-enabled/ddns_exec exec ddns_del { wait = yes program = "/var/scriptsradius/ddns.php del %{User-Name} %{Framed-IP-Address}" input_pairs = "request" shell_escape = no } # Loading module "ddns_add" from file /etc/freeradius/mods-enabled/ddns_exec exec ddns_add { wait = yes program = "/var/scriptsradius/ddns.php add %{User-Name} %{Framed-IP-Address}" input_pairs = "request" shell_escape = no } # Loading module "ntlm_auth" from file /etc/freeradius/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/mods-enabled/soh soh { dhcp = yes } # Loading module "sradutmp" from file /etc/freeradius/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loading module "sqlippool_v6" from file /etc/freeradius/mods-enabled/sqlippool_v6 sqlippool sqlippool_v6 { sql_module_instance = "sql" lease_duration = 3600 pool_name = "Pool-Name" default_pool = "main_pool" ipv6 = yes allocate_begin = "START TRANSACTION" allocate_clear = "UPDATE radippoolv6 SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE expiry_time <= UTC_TIMESTAMP() - INTERVAL 1 SECOND AND nasipaddress = '%{Nas-IP-Address}'" allocate_clear_timeout = 1 allocate_existing = "" allocate_requested = "" allocate_find = "SELECT framedipaddress FROM radippoolv6 WHERE pool_name = '%{control:Pool-Name}' AND (expiry_time < UTC_TIMESTAMP() OR expiry_time IS NULL) ORDER BY (username <> '%{User-Name}'), (callingstationid <> '%{Calling-Station-Id}'), expiry_time LIMIT 1 FOR UPDATE" allocate_update = "UPDATE radippoolv6 SET nasipaddress = '%{NAS-IP-Address}', pool_key = '%{NAS-Port}', callingstationid = '%{Calling-Station-Id}', username = '%{User-Name}', expiry_time = UTC_TIMESTAMP() + INTERVAL 3600 SECOND WHERE framedipaddress = '%I' AND expiry_time IS NULL" allocate_commit = "COMMIT" pool_check = "SELECT id FROM radippoolv6 WHERE pool_name='%{control:Pool-Name}' LIMIT 1" start_begin = "" start_update = "UPDATE radippoolv6 SET expiry_time = UTC_TIMESTAMP() + INTERVAL 3600 SECOND WHERE nasipaddress = '%{NAS-IP-Address}' AND pool_key = '%{NAS-Port}' AND username = '%{User-Name}' AND callingstationid = '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IPv6-Prefix}'" start_commit = "" alive_begin = "" alive_update = "UPDATE radippoolv6 SET expiry_time = UTC_TIMESTAMP() + INTERVAL 3600 SECOND WHERE nasipaddress = '%{Nas-IP-Address}' AND pool_key = '%{NAS-Port}' AND username = '%{User-Name}' AND callingstationid = '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IPv6-Prefix}'" alive_commit = "" stop_begin = "" stop_clear = "UPDATE radippoolv6 SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE nasipaddress = '%{Nas-IP-Address}' AND pool_key = '%{NAS-Port}' AND username = '%{User-Name}' AND callingstationid = '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IPv6-Prefix}'" stop_commit = "" on_begin = "" on_clear = "UPDATE radippoolv6 SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE nasipaddress = '%{Nas-IP-Address}'" on_commit = "" off_begin = "" off_clear = "UPDATE radippoolv6 SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE nasipaddress = '%{Nas-IP-Address}'" off_commit = "" messages { exists = "Existing IP: %{reply:Framed-IP-Address} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})" success = "Allocated IP: %{reply:Framed-IP-Address} from %{control:Pool-Name} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})" clear = "Released IP %{Framed-IP-Address} (did %{Called-Station-Id} cli %{Calling-Station-Id} user %{User-Name})" failed = "IP Allocation FAILED from %{control:Pool-Name} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})" nopool = "No Pool-Name defined (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})" } } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/mods-enabled/replicate # Loading module "exec" from file /etc/freeradius/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôoùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔOÙÛÜY" } # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loading module "detail" from file /etc/freeradius/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/mods-enabled/digest instantiate { } # Instantiating module "pap" from file /etc/freeradius/mods-enabled/pap # Instantiating module "linelog" from file /etc/freeradius/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/mods-enabled/linelog # Instantiating module "files" from file /etc/freeradius/mods-enabled/files reading pairlist file /etc/freeradius/mods-config/files/authorize reading pairlist file /etc/freeradius/mods-config/files/accounting reading pairlist file /etc/freeradius/mods-config/files/pre-proxy # Instantiating module "eap" from file /etc/freeradius/mods-enabled/eap # Linked to sub-module rlm_eap_md5 rlm_eap (EAP): Ignoring EAP method 'leap', because it is no longer supported # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/certs" pem_file_type = yes private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key" certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem" ca_file = "/etc/ssl/certs/ca-certificates.crt" private_key_password = <<< secret >>> dh_file = "/etc/freeradius/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no ca_path_reload_interval = 0 cipher_list = "DEFAULT" reject_unknown_intermediate_ca = no ecdh_curve = "prime256v1" tls_min_version = "1.2" cache { enable = yes lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = yes use_tunneled_reply = yes virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = yes proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "expiration" from file /etc/freeradius/mods-enabled/expiration # Instantiating module "sqlippool_v4" from file /etc/freeradius/mods-enabled/sqlippool_v4 # Instantiating module "sql" from file /etc/freeradius/mods-enabled/sql rlm_sql_mysql: libmysql version: 5.7.35 mysql { tls { tls_required = no check_cert = no check_cert_cn = no } warnings = "auto" } rlm_sql (sql): Attempting to connect to database "radius" rlm_sql (sql): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_sql (sql): Opening additional connection (0), 1 of 32 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on 192.0.2.2 via TCP/IP, server version 5.7.18-log, protocol version 10 rlm_sql (sql): Opening additional connection (1), 1 of 31 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on 192.0.2.2 via TCP/IP, server version 5.7.18-log, protocol version 10 rlm_sql (sql): Opening additional connection (2), 1 of 30 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on 192.0.2.2 via TCP/IP, server version 5.7.18-log, protocol version 10 rlm_sql (sql): Opening additional connection (3), 1 of 29 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on 192.0.2.2 via TCP/IP, server version 5.7.18-log, protocol version 10 rlm_sql (sql): Opening additional connection (4), 1 of 28 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on 192.0.2.2 via TCP/IP, server version 5.7.18-log, protocol version 10 rlm_sql (sql): Processing generate_sql_clients rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname, shortname, type, secret, server FROM nas rlm_sql (sql): Reserved connection (0) rlm_sql (sql): Executing select query: SELECT id, nasname, shortname, type, secret, server FROM nas rlm_sql (sql): Adding client 2804:444:1:1::2 (R1.ITU) to global clients list rlm_sql (2804:444:1:1::2): Client "R1.ITU" (sql) added rlm_sql (sql): Released connection (0) Need more connections to reach 10 spares rlm_sql (sql): Opening additional connection (5), 1 of 27 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on 192.0.2.2 via TCP/IP, server version 5.7.18-log, protocol version 10 Ignoring "allocate_clear_timeout = 1", forcing to "allocate_clear_timeout = 1" # Instantiating module "logintime" from file /etc/freeradius/mods-enabled/logintime # Instantiating module "sqlippool" from file /etc/freeradius/mods-enabled/sqlippool Ignoring "allocate_clear_timeout = 1", forcing to "allocate_clear_timeout = 1" # Instantiating module "IPASS" from file /etc/freeradius/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/mods-enabled/realm # Instantiating module "mschap" from file /etc/freeradius/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "auth_log" from file /etc/freeradius/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/access_reject [/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/accounting_response # Instantiating module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "preprocess" from file /etc/freeradius/mods-enabled/preprocess reading pairlist file /etc/freeradius/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/mods-config/preprocess/hints # Instantiating module "sqlippool_v6" from file /etc/freeradius/mods-enabled/sqlippool_v6 Ignoring "allocate_clear_timeout = 1", forcing to "allocate_clear_timeout = 1" # Instantiating module "cache_eap" from file /etc/freeradius/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "reject" from file /etc/freeradius/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/mods-enabled/always # Instantiating module "detail" from file /etc/freeradius/mods-enabled/detail } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/radiusd.conf } # server server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type CHAP for attr Auth-Type Compiling Auth-Type MS-CHAP for attr Auth-Type # Loading authorize {...} Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} Compiling Post-Auth-Type REJECT for attr Post-Auth-Type } # server inner-tunnel server default { # from file /etc/freeradius/sites-enabled/default # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type CHAP for attr Auth-Type Compiling Auth-Type MS-CHAP for attr Auth-Type # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} Compiling Post-Auth-Type REJECT for attr Post-Auth-Type } # server default radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on proxy address * port 34004 Listening on proxy address :: port 42975 Ready to process requests

2 1

FreeRADIUS - vlan - LDAP - Google Workspace OU - Dynamic Assignment - Regarding
by P.Thirunavukkarasu 06 Sep '21

06 Sep '21

Hi all, We configured the G Suite LDAP with FreeRADIUS server with the great support of our group. One more help requested from the user for the following requirements I am sorry for any inconvenience for this mail We are having different WLAN SSIDs in our campus. Similarly there are different OU in the Google Workspace For Example OU faculty: vlan 10 OU PG Student: vlan 20 OU UG Student: vlan 30 Our requirement is to assign the different vlan ID for each OU of the Google Workspace. https://techblog.glendaleacademy.org/freeradius/dynamic-vlans-and-g-suite In the above page they explained about the different groups. Can we apply the same for the OU? Your suggestions would be highly appreciated... *Dr.P.Thirunavukkarasu*, MVSc, PhD(Medicine), MCA Assistant Professor

2 1