- Freeradius-Users - lists.freeradius.org

Problems configuring IP Fire to work with Freeradius
by Dennis Bühler 17 Aug '21

17 Aug '21

Hey people, i have big problems configuring ip fire to work with freeradius server. ip fire should be the authenticator and "ask" freeradius about the permission to open the connection from the green network to the wan. I just changed the necessary configuration of IP Fire. That it should use red/green/orange and assigned the interfaces. In the orange net there is the freeradius server (ubuntu server) and in the green net there are the clients (ubuntu/w10). The clients in the green net get their ip adresses dynamicallyfrom DHCP. The clients in the green network send their requests over the integrated ip-fire proxy in non transparent mode. Clients and server can ping addresses in the wan and each other. So everybody can reach everybody. After the installation of Freeradius i did the recommended functional test of the "getting started" section and it worked correctly. Now i cant find a solution to work with ipfire as an authenticator. Actually there are just a few settings to configure in the userinterface. wiki.ipfire.org/configuration/network/proxy/wui_conf/auth/radius I set up the following. IP and Ports (1812/1813) of the Radius Server, the Shared Secret, the hostname of the Radius Servers. Activated user identification and added the existing user (same as i tested locally, working fine) to the whitelist. If i now restart the server / clients, the clients are connected to the internet without identification by dhcp. for testing i deactivated the firewall. nothing happens in the debugging shell. it seems like that the communication between client an authenticator or between authenticator and freeradius does not work. Freeradius, Ubuntu Client and IpFire are directly connected (VMs in Hyper V). Sorry because of my bad english. perhaps you have some idea what i obviously forgot to consider or perhaps had the same problem.. Would be nice to get some information. Kind regards Dennis

2 1

Checking certificate client policies for RadSec connection
by Arnaud LAURIOU 17 Aug '21

17 Aug '21

Hi, We are currently checking certificate policy (X509v3 Certificate Policies) of our RadSec clients with an external command : 'openssl verify -policy_check ...' Can we check these policies directly in FR, without an external command ? In debug mode (FR 3.0.23), I can't find these policies in the attributes list created from the client certificate. Regards, Arnaud

2 5

Configurations for proxying radius requests to home-server using TCP
by Abhilash Y G 17 Aug '21

17 Aug '21

Hello, We have a requirement to proxy the request from one freeradius server to another radius server over a TCP. I made some config changes for proxy and virtual server listening to TCP requests over destination freeradius server, it seems it is causing issues when a new socket is created. Whenever a new socket is created it is sending all subsequent requests using the new socket and already sent requests just timed out. I see those timed-out requests were actually accepted by homeserver (freeradius running on it). Could you please suggest configuration changes in proxy.conf and virtual server configuration needed in homeserver. Attaching the config files used. Regards, Abhilash

2 1

Fwd: Configurations for proxying radius requests to home-server using TCP
by Abhilash Y G 17 Aug '21

17 Aug '21

Regards, Abhilash ---------- Forwarded message --------- From: Abhilash Y G <ygabhi(a)gmail.com> Date: Tue, 17 Aug 2021 at 19:06 Subject: Configurations for proxying radius requests to home-server using TCP To: <freeradius-users(a)lists.freeradius.org> Hello, We have a requirement to proxy the request from one freeradius server to another radius server over a TCP. I made some config changes for proxy and virtual server listening to TCP requests over destination freeradius server, it seems it is causing issues when a new socket is created. Whenever a new socket is created it is sending all subsequent requests using the new socket and already sent requests just timed out. I see those timed-out requests were actually accepted by homeserver (freeradius running on it). Could you please suggest configuration changes in proxy.conf and virtual server configuration needed in homeserver. Attaching the config files used. Regards, Abhilash

1 0

IP Fire configuration problems
by cptnftr 17 Aug '21

17 Aug '21

Hey people, i have big problems configuring ip fire to work with freeradius server. ip fire should be the authenticator and "ask" freeradius about the permission to open the connection from the green network to the wan. I just changed the necessary configuration of IP Fire. That it should use red/green/orange and assigned the interfaces. In the orange net there is the freeradius server (ubuntu server) and in the green net there are the clients (ubuntu/w10). The clients in the green net get their ip adresses dynamicallyfrom DHCP. The clients in the green network send their requests over the integrated ip-fire proxy in non transparent mode. Clients and server can ping addresses in the wan and each other. So everybody can reach everybody. After the installation of Freeradius i did the recommended functional test of the "getting started" section and it worked correctly. Now i cant find a solution to work with ipfire as an authenticator. Actually there are just a few settings to configure in the userinterface. wiki.ipfire.org/configuration/network/proxy/wui_conf/auth/radius I set up the following. IP and Ports (1812/1813) of the Radius Server, the Shared Secret, the hostname of the Radius Servers. Activated user identification and added the existing user (same as i tested locally, working fine) to the whitelist. If i now restart the server / clients, the clients are connected to the internet without identification by dhcp. for testing i deactivated the servers firewall. in the freeradius debugging shell nothing happens. Sorry because of my bad english. perhaps you have some idea what i obviously forgot to consider or perhaps had the same problem.. Would be nice to get some information. Kind regards Dennis

2 1

FreeRadius copy-acct-to-home-server
by Pizu 16 Aug '21

16 Aug '21

Hi, Not sure what is wrong, I have enabled the ntdomain and created a home server for the 2nd radius and added the name into the update control section also added the radius01 as a nas on radius2 >From debug am having the below: Fri Aug 13 14:55:32 2021 : Debug: Listening on detail file /var/log/freeradius/radacct/detail as server copy-acct-to-home-server Fri Aug 13 14:55:32 2021 : Debug: Opened new proxy socket 'proxy address * port 40506' Fri Aug 13 14:55:32 2021 : Debug: Listening on proxy address * port 40506 Fri Aug 13 14:55:32 2021 : Info: Ready to process requests Fri Aug 13 14:55:32 2021 : Debug: detail (/var/log/freeradius/radacct/detail): Polling for detail file Fri Aug 13 14:55:32 2021 : Debug: detail (/var/log/freeradius/radacct/detail): Detail listener state unopened waiting 0.964644 sec Fri Aug 13 14:55:33 2021 : Debug: detail (/var/log/freeradius/radacct/detail): Polling for detail file Fri Aug 13 14:55:33 2021 : Debug: detail (/var/log/freeradius/radacct/detail): Detail listener state unopened waiting 0.803769 sec Fri Aug 13 14:55:33 2021 : Debug: detail (/var/log/freeradius/radacct/detail): Polling for detail file Fri Aug 13 14:55:33 2021 : Debug: detail (/var/log/freeradius/radacct/detail): Detail listener state unopened waiting 1.056526 sec Fri Aug 13 14:55:34 2021 : Debug: detail (/var/log/freeradius/radacct/detail): Polling for detail file Fri Aug 13 14:55:34 2021 : Debug: detail (/var/log/freeradius/radacct/detail): Detail listener state unopened waiting 0.929141 sec Fri Aug 13 14:55:35 2021 : Debug: detail (/var/log/freeradius/radacct/detail): Polling for detail file Fri Aug 13 14:55:35 2021 : Debug: detail (/var/log/freeradius/radacct/detail): Detail listener state unopened waiting 1.115887 sec Fri Aug 13 14:55:37 2021 : Debug: detail (/var/log/freeradius/radacct/detail): Polling for detail file Fri Aug 13 14:55:37 2021 : Debug: detail (/var/log/freeradius/radacct/detail): Detail listener state unopened waiting 1.080575 sec Fri Aug 13 14:55:38 2021 : Debug: detail (/var/log/freeradius/radacct/detail): Polling for detail file Fri Aug 13 14:55:38 2021 : Debug: detail (/var/log/freeradius/radacct/detail): Detail listener state unopened waiting 0.757045 sec Fri Aug 13 14:55:38 2021 : Debug: detail (/var/log/freeradius/radacct/detail): Polling for detail file Seems I am missing something. Regards, Pizu

2 9

Prevent statistics update for certain requests
by Stefan Möding 12 Aug '21

12 Aug '21

Hi! We are using FreeRADIUS as service provider. For certain realms we need to forward the access request to customer specific radius servers while the rest is authenticated on our radius. This work in the following ways: 1) "user(a)example.net" wants access. 2) Our NAS tries to authenticate "example.net". 3) "example.net" is a realm that needs to be forwarded to a customer specific server so our radius sends a reply containing attributes (like the IP) that tells the NAS which specific radius server to use. This is implemented by a local radius user named "example.net" with the specific set of reply attributes. 4) The NAS authenticates the user using the customer radius. The other case is as follows: 1) "user(a)example.com" wants access. 2) Our NAS tries to authenticate "example.com". 3) "example.com" is a realm that should be authenticated locally so the radius server returns a reject. 4) The NAS then tries a second time using "user(a)example.com" and sucessfully authenticates the user. As you can imagine the second case leads to a notably number of access rejects in the statistics of the server. Monitoring the rate of rejects alone no longer is useful to monitor the health of the system as these rejects are expected by design. Now we are thinking about a solution and came up with the idea of preventing a statistics update for these rejects. A new internal attribute (e.g. FreeRADIUS-Inhibit-Stats-Update) would be added to the request and the statistics update function would ignore requests that have this attribute set. Setting that attribute in unlang would be easy as it happens in a dedicated virtual server in our case. Does this sound like a good solution for our problem? Could that be useful for others as well (say: a pull-request on Github)? Thanks! -- Stefan

2 1

Redundancy recommendation.
by Pizu 12 Aug '21

12 Aug '21

Hi, I have 2 FreeRadius + MySQL servers in 2 different locations and everything is working with no issues, now I'd like to add redundancy for MySQL. Options: 1) MySQL MASTER/MASTER Replication 2) MySQL Master/Slave 3) FreeRadius SQL redundancy 4) any other idea? I have already tested the option 1 but am not happy with it as am have some errors with the accounting id in the db as am having duplicate entries. For option 3 when the local mariadb is stopped the server doesn't start, is it normal? Regards, Pizu

2 1

Ignore IP address range.
by Pizu 12 Aug '21

12 Aug '21

Hi, Is it possible to ignore framed ip adress if it's in a specific IP address range? Before it is being processed in the accounting/pre accounting? Thanks.

3 6

RE: MSCHAP No logon servers are currently available
by L.P.H. van Belle 12 Aug '21

12 Aug '21

Hai, Please read : https://wiki.samba.org/index.php/Authenticating_Freeradius_against_Active_D… This one is at the moment the only page with the complete info you need.. (for this error) @Alan, These pages are not fully correct. http://deployingradius.com/documents/configuration/active_directory.html Its not complete. (sorry).. You did add the part about : ntlm auth = mschapv2-and-ntlmv2-only Just, im not seeing these parts. : --allow-mschapv2 Which is key to make it work. https://wiki.freeradius.org/guide/freeradius-active-directory-integration-h… Also i see incorrect SMB.conf settings and both are missing the part to use NTLMv2. The link to the samba wiki contain all needed info for the freeradius part. For the smb.conf part, that depends if its a stand alone samba server of domain member/AD-DC. Updating these could save you lots of message in the list. ;-) Greetz, Louis > -----Oorspronkelijk bericht----- > Van: Freeradius-Users > [mailto:freeradius-users-bounces+belle=bazuin.nl@lists.freerad > ius.org] Namens Jure Simši?? via Freeradius-Users > Verzonden: donderdag 12 augustus 2021 11:07 > Aan: Freeradius-Users > CC: Jure Simši?? > Onderwerp: MSCHAP No logon servers are currently available > > Hi, > I've been trying to set up radius+AD integration. I'm > following the docs > http://deployingradius.com/documents/configuration/active_dire > ctory.html and everything is ok until I get to the last part > where I enable ntlm_auth in mods/mschap. I'm getting back > > (0) mschap: ERROR: Program returned code (1) and output 'No > logon servers are currently available to service the logon > request. (0xc000005e)' > (0) mschap: ERROR: No logon servers are currently available > to service the logon request. (0xc000005e) > (0) mschap: Authentication failed > > (full debug below). I've found a thread > https://serverfault.com/questions/608227/authentication-via-ra > dius-mschapv2-error-691 saying there is a reg setting for win > to force radius to use ntlm2 but the link on MS KB is dead > and their search isn't useful.. Does this seem to be this > NTLM/NTLM2 issue or might it be something else? > > Also the users here are used to using their name@domain in > their current setup and ntlm_auth expects just name as > --username and not name@domain. I've seen the use of > Stripped-User-Name but it seems you need to ~activate it > somehow to use it. If I can use this there will be less > confusion with the users. Is this possible? > > > Thank you > Cheers Jure > > ==================== > # freeradius -X > FreeRADIUS Version 3.0.17 > Copyright (C) 1999-2017 The FreeRADIUS server project and contributors > There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A > PARTICULAR PURPOSE > You may redistribute copies of FreeRADIUS under the terms of the > GNU General Public License > For more information about these matters, see the file named COPYRIGHT > Starting - reading configuration files ... > including dictionary file /usr/share/freeradius/dictionary > including dictionary file /usr/share/freeradius/dictionary.dhcp > including dictionary file /usr/share/freeradius/dictionary.vqp > including dictionary file /etc/freeradius/3.0/dictionary > including configuration file /etc/freeradius/3.0/radiusd.conf > including configuration file /etc/freeradius/3.0/proxy.conf > including configuration file /etc/freeradius/3.0/clients.conf > including files in directory /etc/freeradius/3.0/mods-enabled/ > including configuration file > /etc/freeradius/3.0/mods-enabled/preprocess > including configuration file > /etc/freeradius/3.0/mods-enabled/replicate > including configuration file > /etc/freeradius/3.0/mods-enabled/expiration > including configuration file /etc/freeradius/3.0/mods-enabled/utf8 > including configuration file > /etc/freeradius/3.0/mods-enabled/logintime > including configuration file /etc/freeradius/3.0/mods-enabled/expr > including configuration file /etc/freeradius/3.0/mods-enabled/files > including configuration file /etc/freeradius/3.0/mods-enabled/unpack > including configuration file /etc/freeradius/3.0/mods-enabled/eap > including configuration file /etc/freeradius/3.0/mods-enabled/detail > including configuration file /etc/freeradius/3.0/mods-enabled/passwd > including configuration file /etc/freeradius/3.0/mods-enabled/linelog > including configuration file /etc/freeradius/3.0/mods-enabled/unix > including configuration file /etc/freeradius/3.0/mods-enabled/mschap > including configuration file > /etc/freeradius/3.0/mods-enabled/ntlm_auth > including configuration file /etc/freeradius/3.0/mods-enabled/exec > including configuration file /etc/freeradius/3.0/mods-enabled/realm > including configuration file /etc/freeradius/3.0/mods-enabled/echo > including configuration file /etc/freeradius/3.0/mods-enabled/always > including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp > including configuration file /etc/freeradius/3.0/mods-enabled/chap > including configuration file /etc/freeradius/3.0/mods-enabled/soh > including configuration file > /etc/freeradius/3.0/mods-enabled/cache_eap > including configuration file > /etc/freeradius/3.0/mods-enabled/attr_filter > including configuration file /etc/freeradius/3.0/mods-enabled/radutmp > including configuration file /etc/freeradius/3.0/mods-enabled/digest > including configuration file > /etc/freeradius/3.0/mods-enabled/dynamic_clients > including configuration file /etc/freeradius/3.0/mods-enabled/pap > including configuration file > /etc/freeradius/3.0/mods-enabled/detail.log > including files in directory /etc/freeradius/3.0/policy.d/ > including configuration file /etc/freeradius/3.0/policy.d/filter > including configuration file /etc/freeradius/3.0/policy.d/abfab-tr > including configuration file /etc/freeradius/3.0/policy.d/control > including configuration file > /etc/freeradius/3.0/policy.d/moonshot-targeted-ids > including configuration file > /etc/freeradius/3.0/policy.d/canonicalization > including configuration file /etc/freeradius/3.0/policy.d/accounting > including configuration file /etc/freeradius/3.0/policy.d/eap > including configuration file /etc/freeradius/3.0/policy.d/dhcp > including configuration file > /etc/freeradius/3.0/policy.d/operator-name > including configuration file /etc/freeradius/3.0/policy.d/debug > including configuration file /etc/freeradius/3.0/policy.d/cui > including files in directory /etc/freeradius/3.0/sites-enabled/ > including configuration file > /etc/freeradius/3.0/sites-enabled/inner-tunnel > including configuration file /etc/freeradius/3.0/sites-enabled/default > main { > security { > user = "freerad" > group = "freerad" > allow_core_dumps = no > } > name = "freeradius" > prefix = "/usr" > localstatedir = "/var" > logdir = "/var/log/freeradius" > run_dir = "/var/run/freeradius" > } > main { > name = "freeradius" > prefix = "/usr" > localstatedir = "/var" > sbindir = "/usr/sbin" > logdir = "/var/log/freeradius" > run_dir = "/var/run/freeradius" > libdir = "/usr/lib/freeradius" > radacctdir = "/var/log/freeradius/radacct" > hostname_lookups = no > max_request_time = 30 > cleanup_delay = 5 > max_requests = 16384 > pidfile = "/var/run/freeradius/freeradius.pid" > checkrad = "/usr/sbin/checkrad" > debug_level = 0 > proxy_requests = yes > log { > stripped_names = no > auth = no > auth_badpass = no > auth_goodpass = no > colourise = yes > msg_denied = "You are already logged in - access denied" > } > resources { > } > security { > max_attributes = 200 > reject_delay = 1.000000 > status_server = yes > } > } > radiusd: #### Loading Realms and Home Servers #### > proxy server { > retry_delay = 5 > retry_count = 3 > default_fallback = no > dead_time = 120 > wake_all_if_all_dead = no > } > home_server localhost { > ipaddr = 127.0.0.1 > port = 1812 > type = "auth" > secret = <<< secret >>> > response_window = 20.000000 > response_timeouts = 1 > max_outstanding = 65536 > zombie_period = 40 > status_check = "status-server" > ping_interval = 30 > check_interval = 30 > check_timeout = 4 > num_answers_to_alive = 3 > revive_interval = 120 > limit { > max_connections = 16 > max_requests = 0 > lifetime = 0 > idle_timeout = 0 > } > coa { > irt = 2 > mrt = 16 > mrc = 5 > mrd = 30 > } > } > home_server_pool my_auth_failover { > type = fail-over > home_server = localhost > } > realm example.com { > auth_pool = my_auth_failover > } > realm LOCAL { > } > radiusd: #### Loading Clients #### > client localhost { > ipaddr = 127.0.0.1 > require_message_authenticator = no > secret = <<< secret >>> > nas_type = "other" > proto = "*" > limit { > max_connections = 16 > lifetime = 0 > idle_timeout = 30 > } > } > client localhost_ipv6 { > ipv6addr = ::1 > require_message_authenticator = no > secret = <<< secret >>> > limit { > max_connections = 16 > lifetime = 0 > idle_timeout = 30 > } > } > client FMFUnifiController { > ipaddr = 10.20.12.2 > require_message_authenticator = no > secret = <<< secret >>> > limit { > max_connections = 16 > lifetime = 0 > idle_timeout = 30 > } > } > Debugger not attached > # Creating Auth-Type = mschap > # Creating Auth-Type = ntlm_auth > # Creating Auth-Type = eap > # Creating Auth-Type = PAP > # Creating Auth-Type = CHAP > # Creating Auth-Type = MS-CHAP > # Creating Auth-Type = digest > radiusd: #### Instantiating modules #### > modules { > # Loaded module rlm_preprocess > # Loading module "preprocess" from file > /etc/freeradius/3.0/mods-enabled/preprocess > preprocess { > huntgroups = > "/etc/freeradius/3.0/mods-config/preprocess/huntgroups" > hints = "/etc/freeradius/3.0/mods-config/preprocess/hints" > with_ascend_hack = no > ascend_channels_per_line = 23 > with_ntdomain_hack = no > with_specialix_jetstream_hack = no > with_cisco_vsa_hack = no > with_alvarion_vsa_hack = no > } > # Loaded module rlm_replicate > # Loading module "replicate" from file > /etc/freeradius/3.0/mods-enabled/replicate > # Loaded module rlm_expiration > # Loading module "expiration" from file > /etc/freeradius/3.0/mods-enabled/expiration > # Loaded module rlm_utf8 > # Loading module "utf8" from file > /etc/freeradius/3.0/mods-enabled/utf8 > # Loaded module rlm_logintime > # Loading module "logintime" from file > /etc/freeradius/3.0/mods-enabled/logintime > logintime { > minimum_timeout = 60 > } > # Loaded module rlm_expr > # Loading module "expr" from file > /etc/freeradius/3.0/mods-enabled/expr > expr { > safe_characters = > "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567 > 89.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" > } > # Loaded module rlm_files > # Loading module "files" from file > /etc/freeradius/3.0/mods-enabled/files > files { > filename = "/etc/freeradius/3.0/mods-config/files/authorize" > acctusersfile = > "/etc/freeradius/3.0/mods-config/files/accounting" > preproxy_usersfile = > "/etc/freeradius/3.0/mods-config/files/pre-proxy" > } > # Loaded module rlm_unpack > # Loading module "unpack" from file > /etc/freeradius/3.0/mods-enabled/unpack > # Loaded module rlm_eap > # Loading module "eap" from file > /etc/freeradius/3.0/mods-enabled/eap > eap { > default_eap_type = "md5" > timer_expire = 60 > ignore_unknown_eap_types = no > cisco_accounting_username_bug = no > max_sessions = 16384 > } > # Loaded module rlm_detail > # Loading module "detail" from file > /etc/freeradius/3.0/mods-enabled/detail > detail { > filename = > "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Pac > ket-Src-IPv6-Address}}/detail-%Y%m%d" > header = "%t" > permissions = 384 > locking = no > escape_filenames = no > log_packet_header = no > } > # Loaded module rlm_passwd > # Loading module "etc_passwd" from file > /etc/freeradius/3.0/mods-enabled/passwd > passwd etc_passwd { > filename = "/etc/passwd" > format = "*User-Name:Crypt-Password:" > delimiter = ":" > ignore_nislike = no > ignore_empty = yes > allow_multiple_keys = no > hash_size = 100 > } > # Loaded module rlm_linelog > # Loading module "linelog" from file > /etc/freeradius/3.0/mods-enabled/linelog > linelog { > filename = "/var/log/freeradius/linelog" > escape_filenames = no > syslog_severity = "info" > permissions = 384 > format = "This is a log message for %{User-Name}" > reference = "messages.%{%{reply:Packet-Type}:-default}" > } > # Loading module "log_accounting" from file > /etc/freeradius/3.0/mods-enabled/linelog > linelog log_accounting { > filename = "/var/log/freeradius/linelog-accounting" > escape_filenames = no > syslog_severity = "info" > permissions = 384 > format = "" > reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" > } > # Loaded module rlm_unix > # Loading module "unix" from file > /etc/freeradius/3.0/mods-enabled/unix > unix { > radwtmp = "/var/log/freeradius/radwtmp" > } > Creating attribute Unix-Group > # Loaded module rlm_mschap > # Loading module "mschap" from file > /etc/freeradius/3.0/mods-enabled/mschap > mschap { > use_mppe = yes > require_encryption = no > require_strong = no > with_ntdomain_hack = yes > ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key > --username=%{mschap:User-Name:-None} > --domain=%{%{mschap:NT-Domain}:-FMF.UNI-LJ.SI} > --challenge=%{mschap:Challenge:-00} > --nt-response=%{mschap:NT-Response:-00}" > passchange { > } > allow_retry = yes > winbind_retry_with_normalised_username = no > } > # Loaded module rlm_exec > # Loading module "ntlm_auth" from file > /etc/freeradius/3.0/mods-enabled/ntlm_auth > exec ntlm_auth { > wait = yes > program = "/usr/bin/ntlm_auth --request-nt-key > --domain=FMF.UNI-LJ.SI --username=%{mschap:User-Name} > --password=%{User-Password}" > shell_escape = yes > } > # Loading module "exec" from file > /etc/freeradius/3.0/mods-enabled/exec > exec { > wait = no > input_pairs = "request" > shell_escape = yes > timeout = 10 > } > # Loaded module rlm_realm > # Loading module "IPASS" from file > /etc/freeradius/3.0/mods-enabled/realm > realm IPASS { > format = "prefix" > delimiter = "/" > ignore_default = no > ignore_null = no > } > # Loading module "suffix" from file > /etc/freeradius/3.0/mods-enabled/realm > realm suffix { > format = "suffix" > delimiter = "@" > ignore_default = no > ignore_null = no > } > # Loading module "realmpercent" from file > /etc/freeradius/3.0/mods-enabled/realm > realm realmpercent { > format = "suffix" > delimiter = "%" > ignore_default = no > ignore_null = no > } > # Loading module "ntdomain" from file > /etc/freeradius/3.0/mods-enabled/realm > realm ntdomain { > format = "prefix" > delimiter = "\\" > ignore_default = no > ignore_null = no > } > # Loading module "echo" from file > /etc/freeradius/3.0/mods-enabled/echo > exec echo { > wait = yes > program = "/bin/echo %{User-Name}" > input_pairs = "request" > output_pairs = "reply" > shell_escape = yes > } > # Loaded module rlm_always > # Loading module "reject" from file > /etc/freeradius/3.0/mods-enabled/always > always reject { > rcode = "reject" > simulcount = 0 > mpp = no > } > # Loading module "fail" from file > /etc/freeradius/3.0/mods-enabled/always > always fail { > rcode = "fail" > simulcount = 0 > mpp = no > } > # Loading module "ok" from file > /etc/freeradius/3.0/mods-enabled/always > always ok { > rcode = "ok" > simulcount = 0 > mpp = no > } > # Loading module "handled" from file > /etc/freeradius/3.0/mods-enabled/always > always handled { > rcode = "handled" > simulcount = 0 > mpp = no > } > # Loading module "invalid" from file > /etc/freeradius/3.0/mods-enabled/always > always invalid { > rcode = "invalid" > simulcount = 0 > mpp = no > } > # Loading module "userlock" from file > /etc/freeradius/3.0/mods-enabled/always > always userlock { > rcode = "userlock" > simulcount = 0 > mpp = no > } > # Loading module "notfound" from file > /etc/freeradius/3.0/mods-enabled/always > always notfound { > rcode = "notfound" > simulcount = 0 > mpp = no > } > # Loading module "noop" from file > /etc/freeradius/3.0/mods-enabled/always > always noop { > rcode = "noop" > simulcount = 0 > mpp = no > } > # Loading module "updated" from file > /etc/freeradius/3.0/mods-enabled/always > always updated { > rcode = "updated" > simulcount = 0 > mpp = no > } > # Loaded module rlm_radutmp > # Loading module "sradutmp" from file > /etc/freeradius/3.0/mods-enabled/sradutmp > radutmp sradutmp { > filename = "/var/log/freeradius/sradutmp" > username = "%{User-Name}" > case_sensitive = yes > check_with_nas = yes > permissions = 420 > caller_id = no > } > # Loaded module rlm_chap > # Loading module "chap" from file > /etc/freeradius/3.0/mods-enabled/chap > # Loaded module rlm_soh > # Loading module "soh" from file > /etc/freeradius/3.0/mods-enabled/soh > soh { > dhcp = yes > } > # Loaded module rlm_cache > # Loading module "cache_eap" from file > /etc/freeradius/3.0/mods-enabled/cache_eap > cache cache_eap { > driver = "rlm_cache_rbtree" > key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" > ttl = 15 > max_entries = 0 > epoch = 0 > add_stats = no > } > # Loaded module rlm_attr_filter > # Loading module "attr_filter.post-proxy" from file > /etc/freeradius/3.0/mods-enabled/attr_filter > attr_filter attr_filter.post-proxy { > filename = > "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy" > key = "%{Realm}" > relaxed = no > } > # Loading module "attr_filter.pre-proxy" from file > /etc/freeradius/3.0/mods-enabled/attr_filter > attr_filter attr_filter.pre-proxy { > filename = > "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy" > key = "%{Realm}" > relaxed = no > } > # Loading module "attr_filter.access_reject" from file > /etc/freeradius/3.0/mods-enabled/attr_filter > attr_filter attr_filter.access_reject { > filename = > "/etc/freeradius/3.0/mods-config/attr_filter/access_reject" > key = "%{User-Name}" > relaxed = no > } > # Loading module "attr_filter.access_challenge" from file > /etc/freeradius/3.0/mods-enabled/attr_filter > attr_filter attr_filter.access_challenge { > filename = > "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge" > key = "%{User-Name}" > relaxed = no > } > # Loading module "attr_filter.accounting_response" from > file /etc/freeradius/3.0/mods-enabled/attr_filter > attr_filter attr_filter.accounting_response { > filename = > "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response" > key = "%{User-Name}" > relaxed = no > } > # Loading module "radutmp" from file > /etc/freeradius/3.0/mods-enabled/radutmp > radutmp { > filename = "/var/log/freeradius/radutmp" > username = "%{User-Name}" > case_sensitive = yes > check_with_nas = yes > permissions = 384 > caller_id = yes > } > # Loaded module rlm_digest > # Loading module "digest" from file > /etc/freeradius/3.0/mods-enabled/digest > # Loaded module rlm_dynamic_clients > # Loading module "dynamic_clients" from file > /etc/freeradius/3.0/mods-enabled/dynamic_clients > # Loaded module rlm_pap > # Loading module "pap" from file > /etc/freeradius/3.0/mods-enabled/pap > pap { > normalise = yes > } > # Loading module "auth_log" from file > /etc/freeradius/3.0/mods-enabled/detail.log > detail auth_log { > filename = > "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Pac > ket-Src-IPv6-Address}}/auth-detail-%Y%m%d" > header = "%t" > permissions = 384 > locking = no > escape_filenames = no > log_packet_header = no > } > # Loading module "reply_log" from file > /etc/freeradius/3.0/mods-enabled/detail.log > detail reply_log { > filename = > "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Pac > ket-Src-IPv6-Address}}/reply-detail-%Y%m%d" > header = "%t" > permissions = 384 > locking = no > escape_filenames = no > log_packet_header = no > } > # Loading module "pre_proxy_log" from file > /etc/freeradius/3.0/mods-enabled/detail.log > detail pre_proxy_log { > filename = > "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Pac > ket-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" > header = "%t" > permissions = 384 > locking = no > escape_filenames = no > log_packet_header = no > } > # Loading module "post_proxy_log" from file > /etc/freeradius/3.0/mods-enabled/detail.log > detail post_proxy_log { > filename = > "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Pac > ket-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" > header = "%t" > permissions = 384 > locking = no > escape_filenames = no > log_packet_header = no > } > instantiate { > } > # Instantiating module "preprocess" from file > /etc/freeradius/3.0/mods-enabled/preprocess > reading pairlist file > /etc/freeradius/3.0/mods-config/preprocess/huntgroups > reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints > # Instantiating module "expiration" from file > /etc/freeradius/3.0/mods-enabled/expiration > # Instantiating module "logintime" from file > /etc/freeradius/3.0/mods-enabled/logintime > # Instantiating module "files" from file > /etc/freeradius/3.0/mods-enabled/files > reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize > reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting > reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy > # Instantiating module "eap" from file > /etc/freeradius/3.0/mods-enabled/eap > # Linked to sub-module rlm_eap_md5 > # Linked to sub-module rlm_eap_leap > # Linked to sub-module rlm_eap_gtc > gtc { > challenge = "Password: " > auth_type = "PAP" > } > # Linked to sub-module rlm_eap_tls > tls { > tls = "tls-common" > } > tls-config tls-common { > verify_depth = 0 > ca_path = "/etc/freeradius/3.0/certs" > pem_file_type = yes > private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key" > certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem" > ca_file = "/etc/ssl/certs/ca-certificates.crt" > private_key_password = <<< secret >>> > dh_file = "/etc/freeradius/3.0/certs/dh" > fragment_size = 1024 > include_length = yes > auto_chain = yes > check_crl = no > check_all_crl = no > cipher_list = "DEFAULT" > cipher_server_preference = no > ecdh_curve = "prime256v1" > tls_max_version = "" > tls_min_version = "1.0" > cache { > enable = no > lifetime = 24 > max_entries = 255 > } > verify { > skip_if_ocsp_ok = no > } > ocsp { > enable = no > override_cert_url = yes > url = "http://127.0.0.1/ocsp/" > use_nonce = yes > timeout = 0 > softfail = no > } > } > # Linked to sub-module rlm_eap_ttls > ttls { > tls = "tls-common" > default_eap_type = "md5" > copy_request_to_tunnel = no > use_tunneled_reply = no > virtual_server = "inner-tunnel" > include_length = yes > require_client_cert = no > } > tls: Using cached TLS configuration from previous invocation > # Linked to sub-module rlm_eap_peap > peap { > tls = "tls-common" > default_eap_type = "mschapv2" > copy_request_to_tunnel = no > use_tunneled_reply = no > proxy_tunneled_request_as_eap = yes > virtual_server = "inner-tunnel" > soh = no > require_client_cert = no > } > tls: Using cached TLS configuration from previous invocation > # Linked to sub-module rlm_eap_mschapv2 > mschapv2 { > with_ntdomain_hack = no > send_error = no > } > # Instantiating module "detail" from file > /etc/freeradius/3.0/mods-enabled/detail > # Instantiating module "etc_passwd" from file > /etc/freeradius/3.0/mods-enabled/passwd > rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no > # Instantiating module "linelog" from file > /etc/freeradius/3.0/mods-enabled/linelog > # Instantiating module "log_accounting" from file > /etc/freeradius/3.0/mods-enabled/linelog > # Instantiating module "mschap" from file > /etc/freeradius/3.0/mods-enabled/mschap > rlm_mschap (mschap): authenticating by calling 'ntlm_auth' > # Instantiating module "IPASS" from file > /etc/freeradius/3.0/mods-enabled/realm > # Instantiating module "suffix" from file > /etc/freeradius/3.0/mods-enabled/realm > # Instantiating module "realmpercent" from file > /etc/freeradius/3.0/mods-enabled/realm > # Instantiating module "ntdomain" from file > /etc/freeradius/3.0/mods-enabled/realm > # Instantiating module "reject" from file > /etc/freeradius/3.0/mods-enabled/always > # Instantiating module "fail" from file > /etc/freeradius/3.0/mods-enabled/always > # Instantiating module "ok" from file > /etc/freeradius/3.0/mods-enabled/always > # Instantiating module "handled" from file > /etc/freeradius/3.0/mods-enabled/always > # Instantiating module "invalid" from file > /etc/freeradius/3.0/mods-enabled/always > # Instantiating module "userlock" from file > /etc/freeradius/3.0/mods-enabled/always > # Instantiating module "notfound" from file > /etc/freeradius/3.0/mods-enabled/always > # Instantiating module "noop" from file > /etc/freeradius/3.0/mods-enabled/always > # Instantiating module "updated" from file > /etc/freeradius/3.0/mods-enabled/always > # Instantiating module "cache_eap" from file > /etc/freeradius/3.0/mods-enabled/cache_eap > rlm_cache (cache_eap): Driver rlm_cache_rbtree (module > rlm_cache_rbtree) loaded and linked > # Instantiating module "attr_filter.post-proxy" from file > /etc/freeradius/3.0/mods-enabled/attr_filter > reading pairlist file > /etc/freeradius/3.0/mods-config/attr_filter/post-proxy > # Instantiating module "attr_filter.pre-proxy" from file > /etc/freeradius/3.0/mods-enabled/attr_filter > reading pairlist file > /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy > # Instantiating module "attr_filter.access_reject" from > file /etc/freeradius/3.0/mods-enabled/attr_filter > reading pairlist file > /etc/freeradius/3.0/mods-config/attr_filter/access_reject > [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 > Check item "FreeRADIUS-Response-Delay" found in filter > list for realm "DEFAULT". > [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 > Check item "FreeRADIUS-Response-Delay-USec" found in filter > list for realm "DEFAULT". > # Instantiating module "attr_filter.access_challenge" from > file /etc/freeradius/3.0/mods-enabled/attr_filter > reading pairlist file > /etc/freeradius/3.0/mods-config/attr_filter/access_challenge > # Instantiating module "attr_filter.accounting_response" > from file /etc/freeradius/3.0/mods-enabled/attr_filter > reading pairlist file > /etc/freeradius/3.0/mods-config/attr_filter/accounting_response > # Instantiating module "pap" from file > /etc/freeradius/3.0/mods-enabled/pap > # Instantiating module "auth_log" from file > /etc/freeradius/3.0/mods-enabled/detail.log > rlm_detail (auth_log): 'User-Password' suppressed, will not > appear in detail output > # Instantiating module "reply_log" from file > /etc/freeradius/3.0/mods-enabled/detail.log > # Instantiating module "pre_proxy_log" from file > /etc/freeradius/3.0/mods-enabled/detail.log > # Instantiating module "post_proxy_log" from file > /etc/freeradius/3.0/mods-enabled/detail.log > } # modules > radiusd: #### Loading Virtual Servers #### > server { # from file /etc/freeradius/3.0/radiusd.conf > } # server > server inner-tunnel { # from file > /etc/freeradius/3.0/sites-enabled/inner-tunnel > # Loading authenticate {...} > # Loading authorize {...} > Ignoring "sql" (see raddb/mods-available/README.rst) > Ignoring "ldap" (see raddb/mods-available/README.rst) > # Loading session {...} > # Loading post-proxy {...} > # Loading post-auth {...} > # Skipping contents of 'if' as it is always 'false' -- > /etc/freeradius/3.0/sites-enabled/inner-tunnel:335 > } # server inner-tunnel > server default { # from file /etc/freeradius/3.0/sites-enabled/default > # Loading authenticate {...} > # Loading authorize {...} > # Loading preacct {...} > # Loading accounting {...} > # Loading post-proxy {...} > # Loading post-auth {...} > } # server default > radiusd: #### Opening IP addresses and Ports #### > listen { > type = "auth" > ipaddr = 127.0.0.1 > port = 18120 > } > listen { > type = "auth" > ipaddr = * > port = 0 > limit { > max_connections = 16 > lifetime = 0 > idle_timeout = 30 > } > } > listen { > type = "acct" > ipaddr = * > port = 0 > limit { > max_connections = 16 > lifetime = 0 > idle_timeout = 30 > } > } > listen { > type = "auth" > ipv6addr = :: > port = 0 > limit { > max_connections = 16 > lifetime = 0 > idle_timeout = 30 > } > } > listen { > type = "acct" > ipv6addr = :: > port = 0 > limit { > max_connections = 16 > lifetime = 0 > idle_timeout = 30 > } > } > Listening on auth address 127.0.0.1 port 18120 bound to > server inner-tunnel > Listening on auth address * port 1812 bound to server default > Listening on acct address * port 1813 bound to server default > Listening on auth address :: port 1812 bound to server default > Listening on acct address :: port 1813 bound to server default > Listening on proxy address * port 46672 > Listening on proxy address :: port 50901 > Ready to process requests > (0) Received Access-Request Id 46 from 127.0.0.1:45380 to > 127.0.0.1:1812 length 132 > (0) User-Name = "simsic" > (0) NAS-IP-Address = 127.0.1.1 > (0) NAS-Port = 0 > (0) Message-Authenticator = 0x88a617ddc7958578159dfd6d5f7e5a96 > (0) MS-CHAP-Challenge = 0x70721771d4df83b1 > (0) MS-CHAP-Response = > 0x00010000000000000000000000000000000000000000000000000fd2084c > 631219aaeac7af9d60484cf20f14d37c7dffff42 > (0) # Executing section authorize from file > /etc/freeradius/3.0/sites-enabled/default > (0) authorize { > (0) policy filter_username { > (0) if (&User-Name) { > (0) if (&User-Name) -> TRUE > (0) if (&User-Name) { > (0) if (&User-Name =~ / /) { > (0) if (&User-Name =~ / /) -> FALSE > (0) if (&User-Name =~ /@[^@]*@/ ) { > (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE > (0) if (&User-Name =~ /\.\./ ) { > (0) if (&User-Name =~ /\.\./ ) -> FALSE > (0) if ((&User-Name =~ /@/) && (&User-Name !~ > /(a)(.+)\.(.+)$/)) { > (0) if ((&User-Name =~ /@/) && (&User-Name !~ > /(a)(.+)\.(.+)$/)) -> FALSE > (0) if (&User-Name =~ /\.$/) { > (0) if (&User-Name =~ /\.$/) -> FALSE > (0) if (&User-Name =~ /(a)\./) { > (0) if (&User-Name =~ /(a)\./) -> FALSE > (0) } # if (&User-Name) = notfound > (0) } # policy filter_username = notfound > (0) [preprocess] = ok > (0) [chap] = noop > (0) mschap: Found MS-CHAP attributes. Setting 'Auth-Type = mschap' > (0) [mschap] = ok > (0) [digest] = noop > (0) suffix: Checking for suffix after "@" > (0) suffix: No '@' in User-Name = "simsic", looking up realm NULL > (0) suffix: No such realm "NULL" > (0) [suffix] = noop > (0) eap: No EAP-Message, not doing EAP > (0) [eap] = noop > (0) [files] = noop > (0) [expiration] = noop > (0) [logintime] = noop > (0) pap: WARNING: No "known good" password found for the > user. Not setting Auth-Type > (0) pap: WARNING: Authentication will fail unless a "known > good" password is available > (0) [pap] = noop > (0) } # authorize = ok > (0) Found Auth-Type = mschap > (0) # Executing group from file > /etc/freeradius/3.0/sites-enabled/default > (0) authenticate { > (0) mschap: Client is using MS-CHAPv1 with NT-Password > (0) mschap: Executing: /usr/bin/ntlm_auth --request-nt-key > --username=%{mschap:User-Name:-None} > --domain=%{%{mschap:NT-Domain}:-FMF.UNI-LJ.SI} > --challenge=%{mschap:Challenge:-00} > --nt-response=%{mschap:NT-Response:-00}: > (0) mschap: EXPAND --username=%{mschap:User-Name:-None} > (0) mschap: --> --username=simsic > (0) mschap: ERROR: No NT-Domain was found in the User-Name > (0) mschap: EXPAND --domain=%{%{mschap:NT-Domain}:-FMF.UNI-LJ.SI} > (0) mschap: --> --domain=FMF.UNI-LJ.SI > (0) mschap: mschap1: 70 > (0) mschap: EXPAND --challenge=%{mschap:Challenge:-00} > (0) mschap: --> --challenge=70721771d4df83b1 > (0) mschap: EXPAND --nt-response=%{mschap:NT-Response:-00} > (0) mschap: --> > --nt-response=0fd2084c631219aaeac7af9d60484cf20f14d37c7dffff42 > (0) mschap: ERROR: Program returned code (1) and output 'No > logon servers are currently available to service the logon > request. (0xc000005e)' > (0) mschap: ERROR: No logon servers are currently available > to service the logon request. (0xc000005e) > (0) mschap: Authentication failed > (0) [mschap] = fail > (0) } # authenticate = fail > (0) Failed to authenticate the user > (0) Using Post-Auth-Type Reject > (0) # Executing group from file > /etc/freeradius/3.0/sites-enabled/default > (0) Post-Auth-Type REJECT { > (0) attr_filter.access_reject: EXPAND %{User-Name} > (0) attr_filter.access_reject: --> simsic > (0) attr_filter.access_reject: Matched entry DEFAULT at line 11 > (0) [attr_filter.access_reject] = updated > (0) [eap] = noop > (0) policy remove_reply_message_if_eap { > (0) if (&reply:EAP-Message && &reply:Reply-Message) { > (0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE > (0) else { > (0) [noop] = noop > (0) } # else = noop > (0) } # policy remove_reply_message_if_eap = noop > (0) } # Post-Auth-Type REJECT = updated > (0) Delaying response for 1.000000 seconds > Waking up in 0.3 seconds. > Waking up in 0.6 seconds. > (0) Sending delayed response > (0) Sent Access-Reject Id 46 from 127.0.0.1:1812 to > 127.0.0.1:45380 length 61 > (0) MS-CHAP-Error = "\000E=691 R=1 C=fdeee1d540dd4525 V=2" > Waking up in 3.9 seconds. > (0) Cleaning up request packet ID 46 with timestamp +5 > Ready to process requests > > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html >

2 1