- Freeradius-Users - lists.freeradius.org

WPA supplicant
by R C 02 Mar '10

02 Mar '10

hi, is there any wpa supplicant out there that can generate multiple seperate sessions at the same time? i have wpa_supplicant, but it will generate only 1 session per interface. I need to generate 1000's of such wpa client requests going to the free radius server. Any help is appreciated. thanks, rc.

2 1

simultaneous-use doc
by J Brandon Polley 01 Mar '10

01 Mar '10

I am trying to understand the simultaneous-use docI am having trouble with a part that says:Note that you need to add the Simultaneous-Use parameter to the check item (first line), not the reply item, using the ':=' operator.I am not sure where to add the Simultaneous-Use parameter. Does it go in ldap.attrmap.config ?

2 1

duplicate sessions
by Nadir Aliyev 01 Mar '10

01 Mar '10

Hello All! I have great problems with duplicate sessions! ~2500 online users, accounting per minute, 25 db socket limit for radius daemon. Nas port id, accstoptime, session id, inputoctets, outputoctets is same in duplicate sessions. But most duplicate sessions only have difference with acctstarttime (1 second difference) Any ideas? Thanks!

3 2

Conflicting packets
by rihad 01 Mar '10

01 Mar '10

Hi, We have FreeRADIUS 2.1.3 servicing four Cisco NASses, which in turn service hundreds of PPPoE clients. rlm_perl with a custom written script is used for authorization/accounting, performing at about 10 auth requests/sec on a Dell PowerEdge 2950 box. At times, when a NAS is rebooted, triggering reauthentication of hundreds of PPPoE users, the server log is swamped with many lines of this kind: Error: Received conflicting packet from client 10.10.70.3 port 1645 - ID: 86 due to unfinished request 273963. Giving up on old request. Suddenly, it turns out the server isn't making any progress, besides giving up on old requests and chewing CPU time. Only turning off radius authorization on the Ciscos stops the duplicate packet flooding, and then turning it back on part by part brings everything together. I don't think the NAS is to blame, it's the hundreds of ADSL modems doing the frequent reauthentication every few seconds. Some current settings: max_request_time = 6 cleanup_delay = 10 max_requests = 1024 max_servers = 5 #threads are used I've tried all sorts of combinations for the above, with max_requests as low as 50, to no avail. Can freeradius be configured to reply with a (temporary) REJECT to an auth request when max_requests is reached, instead of just ignoring the request? I think that would allow the server to make steady progress. What else should I do in terms of radius configuration? Please do not suggest that I fix the code to make it faster, it's more of a misconfiguration issue (radius or Cisco). The server should be making some progress no matter how slow it ran, unlike what we're having at the times of trouble. Thanks for any tips.

3 4

May I only use rlm_ldap to authenticate against Active Directory? (without samba + winbind + ntlm_auth)
by Tong Anh Quan 01 Mar '10

01 Mar '10

Hi all, Can someone give me a confirmation? Details below: - In modules/ldap, I configures: server = "10.128.28.3" identity = "cn=anonbinduser,dc=domain,dc=com" password = xx basedn = "dc=domain,dc=com" filter = "(sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}})" - In site-enables/inner-tunnel, I uncommented the ldap module - In modules/pap, I changed the auto_header option to "yes". - In eap.conf, + Set the default_eap_type = mschapv2 in peap section + Commented the "virtual server = "inner-tunnel"" line - Create a wpa_supplicant.conf file as follow: network={ scan_ssid=1 ssid="xx" key_mgmt=WPA-EAP pairwise=TKIP group=TKIP eap=PEAP identity="xx" password="xx" ca_cert="/etc/radiusclient/certs/ca.pem" phase1="peaplabel=0" phase2="auth=MSCHAPV2" } - Start radiusd in debug mode and try to connect with wpa_supplicant: wpa_supplicant -c /etc/wpa_supplicant.conf -i wlan0 -D wext -d, I got the following errors: Mon Mar 1 16:08:16 2010 : Info: ++[pap] returns noop Mon Mar 1 16:08:16 2010 : Info: Found Auth-Type = EAP Mon Mar 1 16:08:16 2010 : Info: +- entering group authenticate {...} Mon Mar 1 16:08:16 2010 : Info: [eap] Request found, released from the list Mon Mar 1 16:08:16 2010 : Info: [eap] EAP/mschapv2 Mon Mar 1 16:08:16 2010 : Info: [eap] processing type mschapv2 Mon Mar 1 16:08:16 2010 : Info: [mschapv2] +- entering group MS-CHAP {...} Mon Mar 1 16:08:16 2010 : Info: [mschap] No Cleartext-Password configured. Cannot create LM-Password. Mon Mar 1 16:08:16 2010 : Info: [mschap] No Cleartext-Password configured. Cannot create NT-Password. Mon Mar 1 16:08:16 2010 : Info: [mschap] Told to do MS-CHAPv2 for quan.ta with NT-Password Mon Mar 1 16:08:16 2010 : Info: [mschap] FAILED: No NT/LM-Password. Cannot perform authentication. Mon Mar 1 16:08:16 2010 : Info: [mschap] FAILED: MS-CHAP2-Response is incorrect Mon Mar 1 16:08:16 2010 : Info: ++[mschap] returns reject Mon Mar 1 16:08:16 2010 : Info: [eap] Freeing handler Mon Mar 1 16:08:16 2010 : Info: ++[eap] returns reject Mon Mar 1 16:08:16 2010 : Info: Failed to authenticate the user. Mon Mar 1 16:08:16 2010 : Auth: Login incorrect: [quan.ta/<via Auth-Type = EAP>] (from client aironet port 0 via TLS tunnel) } # server >From my understanding, I cannot make freeradius authenticate with AD only with rlm_ldap module. PS: samba + winbind + ntlm_auth works fine. -- --- Hạnh phúc là một ly Cafe và nhạc Trịnh ---

2 1

Wiki editing
by sphaero 28 Feb '10

28 Feb '10

Am I overlooking something? How do you edit the wiki. I can't find a way to register an account to edit wiki pages. I was about to add some comments about the rlm_sql_iodb driver since everybody need to know the driver looks for the DSN in radius_db config option and not in the server configuration option. (at least for 1.1.8) Rg, Arnaud -- View this message in context: http://old.nabble.com/Wiki-editing-tp27700281p27700281.html Sent from the FreeRadius - User mailing list archive at Nabble.com.

4 4

Authcheck table and groupreply table on two different databases
by 1839Paolo 28 Feb '10

28 Feb '10

Hello everybody, I’ll present myself as a new subscriber; my name is Paolo, I’m from Italy and I work as sysadm at Università di Urbino. The easy think, the question: it’s possible to setup authcheck_table into a database/host and both groupcheck_table, groupreply_table into a different database/host? Now I’ll try to explain the goal, else if that will be not as easy. Ad maybe someone will lead me to a working solution. Maybe will lead to a quite different approach. We have, of course, down there some nice application to manage things, like student, staff etc.; those applications do have their own proprietary databases and they’re authoritative on fields like anagraphics and else usernames and passwords. In an effort to clean that nightly mess of batch scripts transferring credentials around, we decided to leave data where they live, into authoritative databases. It’s easy to pull username/password from a proprietary database, just know where fields are; but I cannot alter the database’s structure and I need some group related radius attributes, say Session-Timeout. I know what the group is, I just ran a query on a student account so the group is stud. I need now to pass ‘stud’ to an authorize_group_reply_query, but must be on a different database. Any hint? And thanks in advance. Paolo. -- View this message in context: http://old.nabble.com/Authcheck-table-and-groupreply-table-on-two-different… Sent from the FreeRadius - User mailing list archive at Nabble.com.

2 2

FreeRadius 2 w/ MySQL - Group check issue
by Craig Schurr 27 Feb '10

27 Feb '10

I recently setup a freeradius 2 server with MySQL and I am having an issue where it doesn't appear to be doing group checks. If I have a user set to a group it doesn't appear to check the attributes set in that group: +----+----------+--------------+----+------------------------------------------+ | id | username | attribute | op | value | +----+----------+--------------+----+------------------------------------------+ | 15 | user1 | SHA-Password | := | 5baa61e4c9b93f3f0682250b6cf8331b7ee68fd8 | +----+----------+--------------+----+------------------------------------------+ 1 row in set (0.00 sec) mysql> select * from radusergroup where username = 'user1'; +----------+-----------+----------+ | username | groupname | priority | +----------+-----------+----------+ | user1 | admin | 1 | +----------+-----------+----------+ 1 row in set (0.00 sec) mysql> select * from radgroupcheck where groupname = 'admin'; +----+-----------+----------------+----+--------+ | id | groupname | attribute | op | value | +----+-----------+----------------+----+--------+ | 3 | admin | NAS-Identifier | == | Adtran | +----+-----------+----------------+----+--------+ 1 row in set (0.00 sec) If I understand correctly the following request should be denied because the NAS-Identifier in the request doesn't match the one specified in the groupcheck table. However, it is replying with Accept-Accept. rad_recv: Access-Request packet from host 64.185.12.105 port 7458, id=61, length=56 User-Name = "user1" User-Password = "password" NAS-Identifier = "Zhone MxK" +- entering group authorize ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop rlm_realm: No '@' in User-Name = "user1", looking up realm NULL rlm_realm: No such realm "NULL" ++[suffix] returns noop rlm_eap: No EAP-Message, not doing EAP ++[eap] returns noop ++[unix] returns notfound ++[files] returns noop expand: %{User-Name} -> user1 rlm_sql (sql): sql_set_user escaped user --> 'user1' rlm_sql (sql): Reserving sql socket id: 3 expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'user1' ORDER BY id rlm_sql_mysql: query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'user1' ORDER BY id rlm_sql (sql): User found in radcheck table expand: SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'user1' ORDER BY id rlm_sql_mysql: query: SELECT id, username, attribute, value, op FROM radreply WHERE username = 'user1' ORDER BY id expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = 'user1' ORDER BY priority rlm_sql_mysql: query: SELECT groupname FROM radusergroup WHERE username = 'user1' ORDER BY priority expand: SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{Sql-Group}' ORDER BY id -> SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = 'admin' ORDER BY id rlm_sql_mysql: query: SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = 'admin' ORDER BY id rlm_sql (sql): Released sql socket id: 3 ++[sql] returns ok ++[expiration] returns noop ++[logintime] returns noop rlm_pap: Normalizing SHA-Password from hex encoding ++[pap] returns updated rad_check_password: Found Auth-Type auth: type "PAP" +- entering group PAP rlm_pap: login attempt with password "password" rlm_pap: Using SHA1 encryption. rlm_pap: User authenticated successfully ++[pap] returns ok Login OK: [user1/password] (from client lab-mxk-1 port 0) +- entering group post-auth rlm_sql (sql): Processing sql_postauth expand: %{User-Name} -> user1 rlm_sql (sql): sql_set_user escaped user --> 'user1' expand: %{User-Password} -> password expand: INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S') -> INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'user1', 'password', 'Access-Accept', '2010-02-24 10:56:24') expand: /var/log/freeradius/sqltrace.sql -> /var/log/freeradius/sqltrace.sql rlm_sql (sql) in sql_postauth: query is INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'user1', 'password', 'Access-Accept', '2010-02-24 10:56:24') rlm_sql (sql): Reserving sql socket id: 2 rlm_sql_mysql: query: INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'user1', 'password', 'Access-Accept', '2010-02-24 10:56:24') rlm_sql (sql): Released sql socket id: 2 ++[sql] returns ok ++[exec] returns noop Sending Access-Accept of id 61 to 64.185.12.105 port 7458 Finished request 0. Going to the next request Waking up in 4.9 seconds. Cleaning up request 0 ID 61 with timestamp +9 Ready to process requests. Any help would be greatly appreciated. Thanks, Craig

2 5

rlm-ldap error for chap
by Eric Eric 27 Feb '10

27 Feb '10

with Cleartext-password or User-Password I have the same error. radius -x and my configs for chap are here. I searched a lot and test it but not found why it can't find clear text password. Should I add other thing? or change another file? It worked for pap and I added : in users : DEFAULT Client-IP-Address == 10.10.10.2 , Auth-Type := Vpn, Autz-Type := Vpn, Post-Auth-Type := Vpn, Session-type := Vpn in radius.conf: ldap ldap-Vpn{ .... password_attribute = userPassword password_header = "{clear}" } authorize { chap Autz-Type Vpn{ ldap-Vpn chap } } authenticate { Auth-Type CHAP { chap } Auth-Type Vpn{ chap } } radiusd -x Starting - reading configuration files ... Using deprecated naslist file. Support for this will go away soon. Module: Loaded exec rlm_exec: Wait=yes but no output defined. Did you mean output=none? Module: Instantiated exec (exec) Module: Loaded expr Module: Instantiated expr (expr) Module: Loaded CHAP Module: Instantiated chap (chap) Module: Loaded MS-CHAP Module: Instantiated mschap (mschap) Module: Loaded LDAP rlm_ldap: Registering ldap_groupcmp for Ldap-Group rlm_ldap: Creating new attribute ldap-Dial-Ldap-Group rlm_ldap: Registering ldap_groupcmp for ldap-Dial-Ldap-Group rlm_ldap: Registering ldap_xlat with xlat_name ldap-Dial rlm_ldap: reading ldap<->radius mappings from file /etc/raddb/ldap.attrmap rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id rlm_ldap: LDAP sambaLMPassword mapped to RADIUS LM-Password rlm_ldap: LDAP sambaNTPassword mapped to RADIUS NT-Password rlm_ldap: LDAP userPassword mapped to RADIUS Cleartext-Password rlm_ldap: LDAP sambaAcctFlags mapped to RADIUS SMB-Account-CTRL-TEXT rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network rlm_ldap: LDAP radiusClass mapped to RADIUS Class rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS Framed-AppleTalk-Network rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message conns: 0x90f2d90 Module: Instantiated ldap (ldap-Vpn) Module: Loaded always Module: Instantiated always (ok) Module: Loaded preprocess Module: Instantiated preprocess (preprocess) Module: Loaded detail Module: Instantiated detail (auth_log) Module: Loaded realm Module: Instantiated realm (suffix) Module: Loaded SQL Counter Module: Instantiated sqlcounter (monthly-Vpn) rlm_ldap: Registering ldap_groupcmp for Ldap-Group rlm_ldap: Creating new attribute ldap-Vpn-Ldap-Group rlm_ldap: Registering ldap_groupcmp for ldap-Vpn-Ldap-Group rlm_ldap: Registering ldap_xlat with xlat_name ldap-Vpn rlm_ldap: reading ldap<->radius mappings from file /etc/raddb/ldap.attrmap rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id rlm_ldap: LDAP sambaLMPassword mapped to RADIUS LM-Password rlm_ldap: LDAP sambaNTPassword mapped to RADIUS NT-Password rlm_ldap: LDAP userPassword mapped to RADIUS Cleartext-Password rlm_ldap: LDAP sambaAcctFlags mapped to RADIUS SMB-Account-CTRL-TEXT rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network rlm_ldap: LDAP radiusClass mapped to RADIUS Class rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS Framed-AppleTalk-Network rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message conns: 0x90fa4c8 Module: Instantiated ldap (ldap-Vpn) Module: Instantiated sqlcounter (monthly-Vpn) Module: Loaded files Module: Instantiated files (files) Module: Loaded Acct-Unique-Session-Id Module: Instantiated acct_unique (acct_unique) Module: Instantiated detail (detail) Module: Loaded SQL rlm_sql (sql-Vpn): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked rlm_sql (sql-Vpn): Attempting to connect to radius@localhost:/vpnradius rlm_sql (sql-Vpn): starting 0 rlm_sql (sql-Vpn): Attempting to connect rlm_sql_mysql #0 rlm_sql_mysql: Starting connect to MySQL server for #0 rlm_sql (sql-Vpn): Connected new DB handle, #0 rlm_sql (sql-Vpn): starting 1 rlm_sql (sql-Vpn): Attempting to connect rlm_sql_mysql #1 rlm_sql_mysql: Starting connect to MySQL server for #1 rlm_sql (sql-Vpn): Connected new DB handle, #1 rlm_sql (sql-Vpn): starting 2 rlm_sql (sql-Vpn): Attempting to connect rlm_sql_mysql #2 rlm_sql_mysql: Starting connect to MySQL server for #2 rlm_sql (sql-Vpn): Connected new DB handle, #2 rlm_sql (sql-Vpn): starting 3 rlm_sql (sql-Vpn): Attempting to connect rlm_sql_mysql #3 rlm_sql_mysql: Starting connect to MySQL server for #3 rlm_sql (sql-Vpn): Connected new DB handle, #3 rlm_sql (sql-Vpn): starting 4 rlm_sql (sql-Vpn): Attempting to connect rlm_sql_mysql #4 rlm_sql_mysql: Starting connect to MySQL server for #4 rlm_sql (sql-Vpn): Connected new DB handle, #4 Module: Instantiated sql (sql-Vpn) Module: Instantiated detail (reply_log) Initializing the thread pool... Listening on authentication *:1812 Listening on accounting *:1813 Ready to process requests. rad_recv: Access-Request packet from host 10.10.10.2:1866, id=78, length=246 Acct-Session-Id = "120" NAS-IP-Address = 10.10.10.2 Service-Type = Framed-User Framed-Protocol = PPP NAS-Port = 128 MS-RAS-Vendor = 311 MS-RAS-Version = "MSRASV5.20" NAS-Port-Type = Virtual Tunnel-Type:0 = PPTP Tunnel-Medium-Type:0 = IP Calling-Station-Id = "10.10.10.24" Tunnel-Client-Endpoint:0 = "10.10.10.24" Microsoft-Attr-35 = 0x4d5352415356352e3130 Microsoft-Attr-34 = 0x4d535241532d302d4955542d3834433132343936333646 User-Name = "test" CHAP-Challenge = 0x45c8e77e0465ea843dc5b419ccb3ca01 CHAP-Password = 0x008a7f35b2a09df3aa79b659a9909ca15f Message-Authenticator = 0x540b9a3a9a929db1621fd2cb4fa1b2cc rlm_chap: Setting 'Auth-Type := CHAP' rlm_ldap: - authorize rlm_ldap: performing user authorization for test rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: (re)connect to 10.10.10.27:389, authentication 0 rlm_ldap: bind as / to 10.10.10.27:389 rlm_ldap: waiting for bind result ... rlm_ldap: Bind was successful rlm_ldap: checking if remote access for test is allowed by vpnAccess rlm_ldap: Adding radiusSimultaneousUse as Simultaneous-Use, value 1 & op=21 rlm_ldap: extracted attribute Max-Monthly-Session from generic item Max-Monthly-Session := 0 rlm_ldap: Adding radiusIdleTimeout as Idle-Timeout, value 1200 & op=11 rlm_ldap: extracted attribute Acct-Interim-Interval from generic item Acct-Interim-Interval := 300 rlm_ldap: Adding radiusSimultaneousUse as Simultaneous-Use, value 1 & op=21 rlm_ldap: extracted attribute Max-Monthly-Session from generic item Max-Monthly-Session := 1080000 rlm_ldap: Adding radiusIdleTimeout as Idle-Timeout, value 1200 & op=11 rlm_ldap: extracted attribute Acct-Interim-Interval from generic item Acct-Interim-Interval := 300 rlm_ldap: looking for check items in directory... rlm_ldap: looking for reply items in directory... rlm_ldap: Adding radiusSessionTimeout as Session-Timeout, value 10 & op=11 rlm_ldap: user test authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 rlm_chap: login attempt by "test" with CHAP password rlm_chap: Could not find clear text password for user test Login incorrect (rlm_chap: Clear text password not available): [test] (from client vpntist port 128 cli 10.10.10.24) I saw the problem in faq but I didn't find what is my mistake. The config is: --- On Wed, 2/24/10, Alan Buxey <A.L.M.Buxey(a)lboro.ac.uk> wrote: From: Alan Buxey <A.L.M.Buxey(a)lboro.ac.uk> Subject: Re: rlm-ldap error for chap To: "FreeRadius users mailing list" <freeradius-users(a)lists.freeradius.org> Date: Wednesday, February 24, 2010, 7:45 PM Hi, > Now to make matters a touch bit more complicated FreeRADIUS changed how > it accessed the clear text password in its set of attributes. In older > versions of FreeRADIUS it was known as User-Password, but that produced > an unfortunate ambiguity and it was later modified to be > Cleartext-Password, I'm sorry but I don't remember the version this was > modified in. version 1.1.4 brought this into play. alan - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

2 1

FreeRADIUS Version 2.1.0 documentation
by Dilip Patel 26 Feb '10

26 Feb '10

Where can I find documentation and training material for Free Radius Version 2.10 FreeRADIUS Version 2.1.0, for host x86_64-pc-linux-gnu Ubuntu 9.04. This is the only version that is available from Synaptics Package manager The current version 2.18 does not work in Ubuntu. I tried building the Debina package as specified in http://wiki.freeradius.org/Build#Building_Debian_packages, but it did not work in Ubuntu 9.04. Or how does one get older versions - i.e. Freeradius 1.0? Configuration for the older versions appeared to be easier.

3 2