- Freeradius-Users - lists.freeradius.org

How to design RADIUS systems for ISPs
by marketing＠networkradius.com 11 May '21

11 May '21

** How to design RADIUS systems for ISPs --------------------------------------------- More than almost any other business, Internet Service Providers (ISPs) need to provide their customers with fast, reliable access to their network. Any downtime can be catastrophic to their business, and slow connection speeds will drive customers away to other providers. ISPs need to ensure that their network has several levels of redundancy in order to provide stable service at all times. This week’s article outlines our ISP RADIUS deployment design best practices. At Network RADIUS, we have been successfully using these principles for over ten years, with customers who are distributed across the world. These practices have been tested, and proven in production. These practices apply to all ISPs, from small to large, though the individual methods can vary depending on the ISPs size and needs. Read the full article… https://networkradius.com/articles/2021/02/10/ISP-RADIUS-design.html ** Sign up to get this content directly --------------------------------------------- Want to get these articles in all their HTML glory? Sign up here: http://eepurl.com/hwuWrn ** Need RADIUS help? --------------------------------------------- Get commercial support from the team behind FreeRADIUS. https://networkradius.com/contact/ ** What is the relationship between Network RADIUS and FreeRADIUS? ---------------------------------------------- FreeRADIUS is an open source implementation of the RADIUS protocol and was written by Alan DeKok in 1999. Network RADIUS is a private, for-profit company founded by Alan DeKok which provides commercial support for FreeRADIUS. The Network RADIUS team has been the primary contributor to FreeRADIUS for the last 20 years. The FreeRADIUS mailing list, wiki, and documentation are all moderated and maintained by the Network RADIUS team. FreeRADIUS has always been, and will always continue to be, open source. The Network RADIUS team provides commercial support to paying clients, and free product development for the FreeRADIUS community at large. All of our software development for FreeRADIUS is integrated into the Open Source platform, and will always continue to be.

1 0

Log entries when proxying
by Tony Skalski 11 May '21

11 May '21

I am proxying some clients (based on outer identity) to our old NPS servers. This is an eduroam wireless environment and many of the example configs I've found have linelog statements in the outer tunnel pre-proxy and post-proxy sections. This results in about 25-30 log messages for a single proxied authentication. This seemed like a lot of messages for a single authn, so I went looking for a state attribute that would allow me to identify the first proxy request and log that, as well as the final proxy accept, but not all of the intervening proxy requests and challenges. Is it commonplace to log a message for each proxy request and challenge like this? (and I should not worry about the number of log messages) Or, is there a way to identify the initial proxy request and not log the intervening requests and challenges? Thanks! ajs -- *Tony Skalski* System Administrator | IT *Office: *507-786-3227 <(507)786-3227> 1510 St. Olaf Avenue Northfield, MN 55057 stolaf.edu

2 2

Failed to start FreeRadius without Error Code
by SImon Dankau 11 May '21

11 May '21

Hello, i am trying to set up a FreeRADIUS-Server with more than one virtual servers. One virtual server is for the WLAN-Connection for different users and the other virtual servers should be for our VPN-connection. While restarting the freeradius.service i with two virtual servers i got the following message: root@bkr-idm1:/etc/freeradius/3.0/sites-available# systemctl restart freeradius.service Job for freeradius.service failed because the control process exited with error code. See "systemctl status freeradius.service" and "journalctl -xe" for details. The messages from journalctl -xe: root@bkr-idm1:/etc/freeradius/3.0/sites-available# journalctl -xe -- Unit freeradius.service has begun shutting down. Mai 11 09:30:36 bkr-idm1 systemd[1]: Stopped FreeRADIUS multi-protocol policy server. -- Subject: Unit freeradius.service has finished shutting down -- Defined-By: systemd -- Support: https://www.debian.org/support -- -- Unit freeradius.service has finished shutting down. Mai 11 09:30:36 bkr-idm1 systemd[1]: Starting FreeRADIUS multi-protocol policy server... -- Subject: Unit freeradius.service has begun start-up -- Defined-By: systemd -- Support: https://www.debian.org/support -- -- Unit freeradius.service has begun starting up. Mai 11 09:30:36 bkr-idm1 freeradius[2150]: FreeRADIUS Version 3.0.12 Mai 11 09:30:36 bkr-idm1 freeradius[2150]: Copyright (C) 1999-2016 The FreeRADIUS server project and contributors Mai 11 09:30:36 bkr-idm1 freeradius[2150]: There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A Mai 11 09:30:36 bkr-idm1 freeradius[2150]: PARTICULAR PURPOSE Mai 11 09:30:36 bkr-idm1 freeradius[2150]: You may redistribute copies of FreeRADIUS under the terms of the Mai 11 09:30:36 bkr-idm1 freeradius[2150]: GNU General Public License Mai 11 09:30:36 bkr-idm1 freeradius[2150]: For more information about these matters, see the file named COPYRIGHT Mai 11 09:30:36 bkr-idm1 freeradius[2150]: Starting - reading configuration files ... Mai 11 09:30:36 bkr-idm1 freeradius[2150]: Debugger not attached Mai 11 09:30:36 bkr-idm1 freeradius[2150]: Creating attribute Unix-Group Mai 11 09:30:36 bkr-idm1 freeradius[2150]: Creating attribute LDAP-Group Mai 11 09:30:36 bkr-idm1 freeradius[2150]: rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output Mai 11 09:30:36 bkr-idm1 freeradius[2150]: tls: Using cached TLS configuration from previous invocation Mai 11 09:30:36 bkr-idm1 freeradius[2150]: [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". Mai 11 09:30:36 bkr-idm1 freeradius[2150]: [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". Mai 11 09:30:36 bkr-idm1 freeradius[2150]: rlm_mschap (mschap): authenticating by calling 'ntlm_auth' Mai 11 09:30:36 bkr-idm1 freeradius[2150]: rlm_ldap: libldap vendor: OpenLDAP, version: 20445 Mai 11 09:30:36 bkr-idm1 freeradius[2150]: rlm_ldap (ldap): Initialising connection pool Mai 11 09:30:36 bkr-idm1 freeradius[2150]: rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked Mai 11 09:30:36 bkr-idm1 freeradius[2150]: Ignoring "sql" (see raddb/mods-available/README.rst) Mai 11 09:30:36 bkr-idm1 freeradius[2150]: radiusd: #### Skipping IP addresses and Ports #### Mai 11 09:30:36 bkr-idm1 freeradius[2150]: Configuration appears to be OK Mai 11 09:30:36 bkr-idm1 freeradius[2150]: rlm_ldap (ldap): Removing connection pool Mai 11 09:30:36 bkr-idm1 systemd[1]: freeradius.service: Control process exited, code=exited status=1 Mai 11 09:30:36 bkr-idm1 systemd[1]: Failed to start FreeRADIUS multi-protocol policy server. -- Subject: Unit freeradius.service has failed -- Defined-By: systemd -- Support: https://www.debian.org/support -- -- Unit freeradius.service has failed. -- -- The result is failed. Mai 11 09:30:36 bkr-idm1 systemd[1]: freeradius.service: Unit entered failed state. Mai 11 09:30:36 bkr-idm1 systemd[1]: freeradius.service: Failed with result 'exit-code'. The configuration of my virtual servers and the clients.conf should be ok. While configuring the virtual servers i got a few error messages from the command journalctl -xe. If i just use one virtual server everthing works fine. A little bit of helf would be appreciated. Regards, Simon Dankau

4 9

Some Question Tricky
by mohamed almeshal 11 May '21

11 May '21

First of all thanks for those kind info . my questions are : * what is the best way to reject all user packets except those who is registered to server . * I need to bind voucher accounts to mac address those are first use the voucher what is the best way to do ? * I have repeated problem that use of MAX-ALL-SESSION for the hotspot usually reject with this message :" Your maximum never usage time has been reached " I try to undestand the problem with no luck . Thanks For generous kind

3 2

no response from eap challenge
by Bill Schoolfield 10 May '21

10 May '21

I'm having difficulty getting eap-ttls to work for a cambium 450 AP and SM. As far as I know (I took over this project from someone else), I have a relatively stock setup (using the cert generated by freeradius, etc) with few changes to configuration. Initially I tried to get the cambium equipment working and ran into tls versions issues. It appears the cambium equipment only works on tls 1.0 (yes I know this is bad). So I've set the min and max tls versions accordingly. Now I have the situation where the server gets no response from the eap challenge. I also have tried the radeapclient and I get the same result. The log for the radeapclient and freeradius are listed below. Suggestions on what is wrong? Bill [billmax@fradius01 ~]$ radeapclient -x localhost auth testing123 Loading input data... User-Name = "tu" EAP-MD5-Password = "testp2" EAP-Code = Response EAP-Id = 210 EAP-Type-Identity = 0x7475 Message-Authenticator = 0x00 EAP-Message = 0x02d20007017475 Read 1 element(s) from input: stdin Loaded: 1 input element(s). Adding new socket: src: 0.0.0.0:0, dst: 127.0.0.1:1812 Added new socket: 5 (num sockets: 1) Sent Access-Request Id 66 from 0.0.0.0:41701 to 127.0.0.1:1812 length 51 User-Name = "tu" EAP-MD5-Password = "testp2" EAP-Code = Response EAP-Id = 210 EAP-Type-Identity = 0x7475 Message-Authenticator = 0x00 EAP-Message = 0x02d20007017475 Received Access-Challenge Id 66 from 127.0.0.1:1812 to 0.0.0.0:41701 length 64 EAP-Message = 0x01d300061520 Message-Authenticator = 0x84d76f0e050084063118f8f3346dc35b State = 0x01bcbf27016faa306e928f1b23fa0dc0 EAP-Id = 211 EAP-Code = Request EAP-Type-EAP-TTLS = 0x20 Main loop: done. *EAP transaction finished, but reply is not an Access-Accept*[billmax@fradius01 ~]$ [root@fradius01 mods-enabled]# radiusd -X FreeRADIUS Version 3.0.20 Copyright (C) 1999-2019 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/raddb/dictionary including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/mods-enabled/ including configuration file /etc/raddb/mods-enabled/sql including configuration file /etc/raddb/mods-config/sql/main/mysql/queries.conf including configuration file /etc/raddb/mods-enabled/preprocess including configuration file /etc/raddb/mods-enabled/attr_filter including configuration file /etc/raddb/mods-enabled/linelog including configuration file /etc/raddb/mods-enabled/sradutmp including configuration file /etc/raddb/mods-enabled/replicate including configuration file /etc/raddb/mods-enabled/soh including configuration file /etc/raddb/mods-enabled/expiration including configuration file /etc/raddb/mods-enabled/passwd including configuration file /etc/raddb/mods-enabled/dynamic_clients including configuration file /etc/raddb/mods-enabled/expr including configuration file /etc/raddb/mods-enabled/files including configuration file /etc/raddb/mods-enabled/eap including configuration file /etc/raddb/mods-enabled/utf8 including configuration file /etc/raddb/mods-enabled/unix including configuration file /etc/raddb/mods-enabled/cache_eap including configuration file /etc/raddb/mods-enabled/detail including configuration file /etc/raddb/mods-enabled/radutmp including configuration file /etc/raddb/mods-enabled/always including configuration file /etc/raddb/mods-enabled/date including configuration file /etc/raddb/mods-enabled/digest including configuration file /etc/raddb/mods-enabled/echo including configuration file /etc/raddb/mods-enabled/pap including configuration file /etc/raddb/mods-enabled/mschap including configuration file /etc/raddb/mods-enabled/realm including configuration file /etc/raddb/mods-enabled/chap including configuration file /etc/raddb/mods-enabled/detail.log including configuration file /etc/raddb/mods-enabled/exec including configuration file /etc/raddb/mods-enabled/logintime including configuration file /etc/raddb/mods-enabled/unpack including configuration file /etc/raddb/mods-enabled/ntlm_auth including files in directory /etc/raddb/policy.d/ including configuration file /etc/raddb/policy.d/control including configuration file /etc/raddb/policy.d/operator-name including configuration file /etc/raddb/policy.d/filter including configuration file /etc/raddb/policy.d/cui including configuration file /etc/raddb/policy.d/eap including configuration file /etc/raddb/policy.d/canonicalization including configuration file /etc/raddb/policy.d/rfc7542 including configuration file /etc/raddb/policy.d/dhcp including configuration file /etc/raddb/policy.d/accounting including configuration file /etc/raddb/policy.d/debug including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/inner-tunnel main { security { user = "radiusd" group = "radiusd" allow_core_dumps = no } name = "radiusd" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" } main { name = "radiusd" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" libdir = "/usr/lib64/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_sql # Loading module "sql" from file /etc/raddb/mods-enabled/sql sql { driver = "rlm_sql_mysql" server = "localhost" port = 3306 login = "radius" password = <<< secret >>> radius_db = "radius" read_groups = yes read_profiles = yes read_clients = yes delete_stale_sessions = yes sql_user_name = "%{User-Name}" default_user_profile = "" client_query = "SELECT id, nasname, shortname, type, secret, server FROM nas" authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id" authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id" group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority" simul_count_query = "SELECT COUNT(*) FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}'ND acctstoptime IS NULL" safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" auto_escape = no accounting { reference = "%{tolower:type.%{%{Acct-Status-Type}:-%{Request-Processing-Stage}}.query}" type { accounting-on { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause =%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})" } accounting-off { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause =%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})" } start { query = "INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, cctupdatetime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callgstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, framedipv6address, framedipv6prefix, framedinterfaceid, delegatedipv6prefix) VALUES ('%{Acctession-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}', FROM_UNIXTIME(%{integer:Event-Timestamp}), FROMNIXTIME(%{integer:Event-Timestamp}), NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', {Framed-IP-Address}', '%{Framed-IPv6-Address}', '%{Framed-IPv6-Prefix}', '%{Framed-Interface-Id}', '%{Delegated-IPv6-Prefix}')" } interim-update { query = "UPDATE radacct SET acctupdatetime = (@acctupdatetime_old:=acctupdatetime), acctupdatetime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctinterval = %{integer:Event-Timestam - UNIX_TIMESTAMP(@acctupdatetime_old), framedipaddress = '%{Framed-IP-Address}', framedipv6address = '%{Framed-IPv6-Address}', framedipv6prefix = '%{Framed-IPv6-Prefix}', framedinterfaceid = '%{Fmed-Interface-Id}', delegatedipv6prefix = '%{Delegated-IPv6-Prefix}', acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octs}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'" } stop { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Giwords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', connectfo_stop = '%{Connect-Info}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'" } } } post-auth { reference = ".query" query = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')" } } rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked Creating attribute SQL-Group # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups" hints = "/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/raddb/mods-enabled/linelog linelog { filename = "/var/log/radius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/var/log/radius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_radutmp # Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/raddb/mods-enabled/replicate # Loaded module rlm_soh # Loading module "soh" from file /etc/raddb/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/raddb/mods-enabled/expiration # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_expr # Loading module "expr" from file /etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /Ã¤Ã©Ã¶Ã¼Ã Ã¢Ã¦Ã§Ã¨Ã©ÃªÃ«Ã®Ã¯Ã´ÅÃ¹Ã»Ã¼aÃ¿Ã ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÅÃÃÅ¸" } # Loaded module rlm_files # Loading module "files" from file /etc/raddb/mods-enabled/files files { filename = "/etc/raddb/mods-config/files/authorize" acctusersfile = "/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy" } # Loaded module rlm_eap # Loading module "eap" from file /etc/raddb/mods-enabled/eap eap { default_eap_type = "ttls" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/raddb/mods-enabled/utf8 # Loaded module rlm_unix # Loading module "unix" from file /etc/raddb/mods-enabled/unix unix { radwtmp = "/var/log/radius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_detail # Loading module "detail" from file /etc/raddb/mods-enabled/detail detail { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_always # Loading module "reject" from file /etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_date # Loading module "date" from file /etc/raddb/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" utc = no } # Loading module "wispr2date" from file /etc/raddb/mods-enabled/date date wispr2date { format = "%Y-%m-%dT%H:%M:%S" utc = no } # Loaded module rlm_digest # Loading module "digest" from file /etc/raddb/mods-enabled/digest # Loaded module rlm_exec # Loading module "echo" from file /etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_pap # Loading module "pap" from file /etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "bangpath" from file /etc/raddb/mods-enabled/realm realm bangpath { format = "prefix" delimiter = "!" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_chap # Loading module "chap" from file /etc/raddb/mods-enabled/chap # Loading module "auth_log" from file /etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "exec" from file /etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/raddb/mods-enabled/unpack # Loading module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } instantiate { } # Instantiating module "sql" from file /etc/raddb/mods-enabled/sql rlm_sql_mysql: libmysql version: 10.5.5 mysql { tls { tls_required = no check_cert = no check_cert_cn = no } warnings = "auto" } rlm_sql (sql): Attempting to connect to database "radius" rlm_sql (sql): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_sql (sql): Opening additional connection (0), 1 of 32 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.3.27-MariaDB, protocol version 10 rlm_sql (sql): Opening additional connection (1), 1 of 31 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.3.27-MariaDB, protocol version 10 rlm_sql (sql): Opening additional connection (2), 1 of 30 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.3.27-MariaDB, protocol version 10 rlm_sql (sql): Opening additional connection (3), 1 of 29 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.3.27-MariaDB, protocol version 10 rlm_sql (sql): Opening additional connection (4), 1 of 28 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.3.27-MariaDB, protocol version 10 rlm_sql (sql): Processing generate_sql_clients rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname, shortname, type, secret, server FROM nas rlm_sql (sql): Reserved connection (0) rlm_sql (sql): Executing select query: SELECT id, nasname, shortname, type, secret, server FROM nas rlm_sql (sql): Adding client 10.70.45.130 (10.70.45.130) to global clients list rlm_sql (10.70.45.130): Client "10.70.45.130" (sql) added rlm_sql (sql): Released connection (0) Need 5 more connections to reach 10 spares rlm_sql (sql): Opening additional connection (5), 1 of 27 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.3.27-MariaDB, protocol version 10 # Instantiating module "preprocess" from file /etc/raddb/mods-enabled/preprocess reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /etc/raddb/mods-config/preprocess/hints # Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog # Instantiating module "expiration" from file /etc/raddb/mods-enabled/expiration # Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "files" from file /etc/raddb/mods-enabled/files reading pairlist file /etc/raddb/mods-config/files/authorize reading pairlist file /etc/raddb/mods-config/files/accounting reading pairlist file /etc/raddb/mods-config/files/pre-proxy # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/raddb/certs" pem_file_type = yes private_key_file = "/etc/raddb/certs/server.pem" certificate_file = "/etc/raddb/certs/server.pem" ca_file = "/etc/raddb/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/raddb/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "PROFILE=SYSTEM" cipher_server_preference = no ecdh_curve = "prime256v1" tls_max_version = "1.3" tls_min_version = "1.0" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } The configuration allows TLS 1.0 and/or TLS 1.1. We STRONGLY recommned using only TLS 1.2 for security Please set: min_tls_version = "1.2" # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail # Instantiating module "reject" from file /etc/raddb/mods-enabled/always # Instantiating module "fail" from file /etc/raddb/mods-enabled/always # Instantiating module "ok" from file /etc/raddb/mods-enabled/always # Instantiating module "handled" from file /etc/raddb/mods-enabled/always # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always # Instantiating module "noop" from file /etc/raddb/mods-enabled/always # Instantiating module "updated" from file /etc/raddb/mods-enabled/always # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm # Instantiating module "bangpath" from file /etc/raddb/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/raddb/radiusd.conf } # server server default { # from file /etc/raddb/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/raddb/sites-enabled/inner-tunnel:336 } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on proxy address * port 33819 Listening on proxy address :: port 42830 Ready to process requests (0) Received Access-Request Id 66 from 127.0.0.1:41701 to 127.0.0.1:1812 length 51 (0) User-Name = "tu" (0) Message-Authenticator = 0x1adddd665b91513bce5c156ab50cb8a5 (0) EAP-Message = 0x02d20007017475 (0) # Executing section authorize from file /etc/raddb/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "tu", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 210 length 7 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/raddb/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_ttls to process data (0) eap_ttls: Initiating new TLS session (0) eap_ttls: [eaptls start] = request (0) eap: Sending EAP Request (code 1) ID 211 length 6 (0) eap: EAP session adding &reply:State = 0x01bcbf27016faa30 (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) # Executing group from file /etc/raddb/sites-enabled/default (0) Challenge { ... } # empty sub-section is ignored (0) Sent Access-Challenge Id 66 from 127.0.0.1:1812 to 127.0.0.1:41701 length 0 (0) EAP-Message = 0x01d300061520 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0x01bcbf27016faa306e928f1b23fa0dc0 (0) Finished request Waking up in 4.9 seconds. (0) Cleaning up request packet ID 66 with timestamp +71 Ready to process requests

2 1

FreeRadis 2FA - 2 Factor Authentication
by Fernando Patzlaff 09 May '21

09 May '21

Hello! I want to know if are there a free tool that do 2FA integration between google authenticator app or authy app and freeradius ? Thank you very much in advance. - - - Fernando

3 3

proxy_tunneled_request_as_eap and two proxy/realm
by Andrey Igoshin 08 May '21

08 May '21

Hi! eap configuration: ================== eap { ... peap { ... proxy_tunneled_request_as_eap = no virtual_server = "proxy-inner-tunnel" } } two proxy/realm: ================ server proxy-inner-tunnel { authorize { if (&User-Name && (&User-Name =~ /^.+\@.+$/)) { update control { &Proxy-To-Realm := "rCGP" } } elsif (&User-Name && (&User-Name =~ /^host\/.+$/)) { update control { &Proxy-To-Realm := "rAD" } } } ... } ================== is it possible to use "proxy_tunneled_request_as_eap = no" for rCGP realm and "proxy_tunneled_request_as_eap = yes" for rAD realm ? -- Andrey Igoshin <ai(a)vsu.ru> Voronezh State University sip:ai@vsu.ru Network Operation Center phone: +7 473 2281160, ext. 2020 Voronezh, Russia

2 1

Problems with VLAN selection
by Tom Yates 05 May '21

05 May '21

Hi. I've got freeradius 3.0.3 running on CentOS 7, to allow clients on a group of Aruba WiFi access points to do WPA Enterprise. The Arubas are configured to set the VLAN from Tunnel-Private-Group-Id, with VLAN 52 used as a fallback. The basics seem to work fine (yaay freeradius!); clients with wrong usernames and/or passwords (according to /etc/raddb/users) don't get on, and clients with correct usernames and passwords do. But the VLAN information I'm trying to pass to the Arubas is either not being passed, or it's being ignored, and everyone ends up on VLAN 52. The relevant snippet of /etc/raddb/users is tom.yates Cleartext-Password := "XXXXXXXXXXXX" Tunnel-Type = 13, Tunnel-Medium-Type = 6, Tunnel-Private-Group-ID = 55 Here's the output of "radiusd -X" while i try to authenticate this user, and end up on VLAN 52 (instead of VLAN 55, as I'd hoped). If anyone can shed any light on whether the problem is likely to be the Arubas or my setup of freeradius, and how I might go about hunting the problem down and fixing it (or, indeed, if I'm trying to do something structurally foolish) I'd be grateful. FreeRADIUS Version 3.0.13 Copyright (C) 1999-2017 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/raddb/dictionary including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/mods-enabled/ including configuration file /etc/raddb/mods-enabled/always including configuration file /etc/raddb/mods-enabled/attr_filter including configuration file /etc/raddb/mods-enabled/cache_eap including configuration file /etc/raddb/mods-enabled/chap including configuration file /etc/raddb/mods-enabled/date including configuration file /etc/raddb/mods-enabled/detail including configuration file /etc/raddb/mods-enabled/detail.log including configuration file /etc/raddb/mods-enabled/dhcp including configuration file /etc/raddb/mods-enabled/digest including configuration file /etc/raddb/mods-enabled/dynamic_clients including configuration file /etc/raddb/mods-enabled/eap including configuration file /etc/raddb/mods-enabled/echo including configuration file /etc/raddb/mods-enabled/exec including configuration file /etc/raddb/mods-enabled/expiration including configuration file /etc/raddb/mods-enabled/expr including configuration file /etc/raddb/mods-enabled/files including configuration file /etc/raddb/mods-enabled/linelog including configuration file /etc/raddb/mods-enabled/logintime including configuration file /etc/raddb/mods-enabled/mschap including configuration file /etc/raddb/mods-enabled/ntlm_auth including configuration file /etc/raddb/mods-enabled/pap including configuration file /etc/raddb/mods-enabled/passwd including configuration file /etc/raddb/mods-enabled/preprocess including configuration file /etc/raddb/mods-enabled/radutmp including configuration file /etc/raddb/mods-enabled/realm including configuration file /etc/raddb/mods-enabled/replicate including configuration file /etc/raddb/mods-enabled/soh including configuration file /etc/raddb/mods-enabled/sradutmp including configuration file /etc/raddb/mods-enabled/unix including configuration file /etc/raddb/mods-enabled/unpack including configuration file /etc/raddb/mods-enabled/utf8 including files in directory /etc/raddb/policy.d/ including configuration file /etc/raddb/policy.d/accounting including configuration file /etc/raddb/policy.d/canonicalization including configuration file /etc/raddb/policy.d/control including configuration file /etc/raddb/policy.d/cui including configuration file /etc/raddb/policy.d/debug including configuration file /etc/raddb/policy.d/dhcp including configuration file /etc/raddb/policy.d/eap including configuration file /etc/raddb/policy.d/filter including configuration file /etc/raddb/policy.d/operator-name including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/inner-tunnel main { security { user = "radiusd" group = "radiusd" allow_core_dumps = no } name = "radiusd" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" } main { name = "radiusd" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" libdir = "/usr/lib64/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = yes auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client private-network-1 { ipaddr = 192.168.48.0/24 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_always # Loading module "reject" from file /etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_chap # Loading module "chap" from file /etc/raddb/mods-enabled/chap # Loaded module rlm_date # Loading module "date" from file /etc/raddb/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" } # Loaded module rlm_detail # Loading module "detail" from file /etc/raddb/mods-enabled/detail detail { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "auth_log" from file /etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_dhcp # Loading module "dhcp" from file /etc/raddb/mods-enabled/dhcp # Loaded module rlm_digest # Loading module "digest" from file /etc/raddb/mods-enabled/digest # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_eap # Loading module "eap" from file /etc/raddb/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_exec # Loading module "echo" from file /etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loading module "exec" from file /etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/raddb/mods-enabled/expiration # Loaded module rlm_expr # Loading module "expr" from file /etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_files # Loading module "files" from file /etc/raddb/mods-enabled/files files { filename = "/etc/raddb/mods-config/files/authorize" acctusersfile = "/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy" } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/raddb/mods-enabled/linelog linelog { filename = "/var/log/radius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/var/log/radius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loading module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_pap # Loading module "pap" from file /etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups" hints = "/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/raddb/mods-enabled/replicate # Loaded module rlm_soh # Loading module "soh" from file /etc/raddb/mods-enabled/soh soh { dhcp = yes } # Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_unix # Loading module "unix" from file /etc/raddb/mods-enabled/unix unix { radwtmp = "/var/log/radius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_unpack # Loading module "unpack" from file /etc/raddb/mods-enabled/unpack # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/raddb/mods-enabled/utf8 instantiate { } # Instantiating module "reject" from file /etc/raddb/mods-enabled/always # Instantiating module "fail" from file /etc/raddb/mods-enabled/always # Instantiating module "ok" from file /etc/raddb/mods-enabled/always # Instantiating module "handled" from file /etc/raddb/mods-enabled/always # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always # Instantiating module "noop" from file /etc/raddb/mods-enabled/always # Instantiating module "updated" from file /etc/raddb/mods-enabled/always # Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject [/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response # Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/raddb/certs" pem_file_type = yes private_key_file = "/etc/raddb/certs/server.pem" certificate_file = "/etc/raddb/certs/server.pem" ca_file = "/etc/raddb/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/raddb/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "expiration" from file /etc/raddb/mods-enabled/expiration # Instantiating module "files" from file /etc/raddb/mods-enabled/files reading pairlist file /etc/raddb/mods-config/files/authorize reading pairlist file /etc/raddb/mods-config/files/accounting reading pairlist file /etc/raddb/mods-config/files/pre-proxy # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog # Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap # Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "preprocess" from file /etc/raddb/mods-enabled/preprocess reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /etc/raddb/mods-config/preprocess/hints # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/raddb/radiusd.conf } # server server default { # from file /etc/raddb/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/raddb/sites-enabled/inner-tunnel:330 } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on proxy address * port 46989 Listening on proxy address :: port 36957 Ready to process requests (0) Received Access-Request Id 78 from 192.168.48.16:58562 to 192.168.49.23:1812 length 215 (0) User-Name = "tom.yates" (0) NAS-IP-Address = 192.168.48.16 (0) NAS-Port = 0 (0) NAS-Identifier = "192.168.48.16" (0) NAS-Port-Type = Wireless-802.11 (0) Calling-Station-Id = "185e0f77d68e" (0) Called-Station-Id = "f42e7fc2e520" (0) Service-Type = Framed-User (0) Framed-MTU = 1100 (0) EAP-Message = 0x0201000e01746f6d2e7961746573 (0) Aruba-Essid-Name = "fangorn2" (0) Aruba-Location-Id = "f4:2e:7f:c2:e5:20" (0) Aruba-AP-Group = "SetMeUp-C3:01:F8" (0) Aruba-Device-Type = "NOFP" (0) Message-Authenticator = 0x647d7a9764c69ab5221d7e7b16725be1 (0) # Executing section authorize from file /etc/raddb/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "tom.yates", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 1 length 14 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/raddb/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_md5 to process data (0) eap_md5: Issuing MD5 Challenge (0) eap: Sending EAP Request (code 1) ID 2 length 22 (0) eap: EAP session adding &reply:State = 0xa07fc9dca07dcde6 (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) # Executing group from file /etc/raddb/sites-enabled/default (0) Challenge { ... } # empty sub-section is ignored (0) Sent Access-Challenge Id 78 from 192.168.49.23:1812 to 192.168.48.16:58562 length 0 (0) EAP-Message = 0x010200160410f6ce6fec38c00f54d51f8615f2287bd8 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0xa07fc9dca07dcde680005dbd51042520 (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 79 from 192.168.48.16:58562 to 192.168.49.23:1812 length 225 (1) User-Name = "tom.yates" (1) NAS-IP-Address = 192.168.48.16 (1) NAS-Port = 0 (1) NAS-Identifier = "192.168.48.16" (1) NAS-Port-Type = Wireless-802.11 (1) Calling-Station-Id = "185e0f77d68e" (1) Called-Station-Id = "f42e7fc2e520" (1) Service-Type = Framed-User (1) Framed-MTU = 1100 (1) EAP-Message = 0x020200060319 (1) State = 0xa07fc9dca07dcde680005dbd51042520 (1) Aruba-Essid-Name = "fangorn2" (1) Aruba-Location-Id = "f4:2e:7f:c2:e5:20" (1) Aruba-AP-Group = "SetMeUp-C3:01:F8" (1) Aruba-Device-Type = "NOFP" (1) Message-Authenticator = 0xcaaa57b711e9a0a38c577e217ecffe3e (1) session-state: No cached attributes (1) # Executing section authorize from file /etc/raddb/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /(a)\./) { (1) if (&User-Name =~ /(a)\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "tom.yates", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 2 length 6 (1) eap: No EAP Start, assuming it's an on-going EAP conversation (1) [eap] = updated (1) files: users: Matched entry tom.yates at line 95 (1) [files] = ok (1) [expiration] = noop (1) [logintime] = noop (1) pap: WARNING: Auth-Type already set. Not setting to PAP (1) [pap] = noop (1) } # authorize = updated (1) Found Auth-Type = eap (1) # Executing group from file /etc/raddb/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0xa07fc9dca07dcde6 (1) eap: Finished EAP session with state 0xa07fc9dca07dcde6 (1) eap: Previous EAP request found for state 0xa07fc9dca07dcde6, released from the list (1) eap: Peer sent packet with method EAP NAK (3) (1) eap: Found mutually acceptable type PEAP (25) (1) eap: Calling submodule eap_peap to process data (1) eap_peap: Initiating new EAP-TLS session (1) eap_peap: [eaptls start] = request (1) eap: Sending EAP Request (code 1) ID 3 length 6 (1) eap: EAP session adding &reply:State = 0xa07fc9dca17cd0e6 (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) # Executing group from file /etc/raddb/sites-enabled/default (1) Challenge { ... } # empty sub-section is ignored (1) Sent Access-Challenge Id 79 from 192.168.49.23:1812 to 192.168.48.16:58562 length 0 (1) Tunnel-Type = VLAN (1) Tunnel-Medium-Type = IEEE-802 (1) Tunnel-Private-Group-Id = "55" (1) EAP-Message = 0x010300061920 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0xa07fc9dca17cd0e680005dbd51042520 (1) Finished request Waking up in 4.9 seconds. (2) Received Access-Request Id 80 from 192.168.48.16:58562 to 192.168.49.23:1812 length 421 (2) User-Name = "tom.yates" (2) NAS-IP-Address = 192.168.48.16 (2) NAS-Port = 0 (2) NAS-Identifier = "192.168.48.16" (2) NAS-Port-Type = Wireless-802.11 (2) Calling-Station-Id = "185e0f77d68e" (2) Called-Station-Id = "f42e7fc2e520" (2) Service-Type = Framed-User (2) Framed-MTU = 1100 (2) EAP-Message = 0x020300ca1980000000c016030100bb010000b703033ad08fce4375d854943de05e8620f9a9c0dcc628e60554ec66b23f893657e9ee000048c02cc030cca9cca8c0adc02bc02fc0acc023c027c00ac014c009c013009dc09d009cc09c003d003c0035002f009fccaac09f009ec09e006b006700390033c0 (2) State = 0xa07fc9dca17cd0e680005dbd51042520 (2) Aruba-Essid-Name = "fangorn2" (2) Aruba-Location-Id = "f4:2e:7f:c2:e5:20" (2) Aruba-AP-Group = "SetMeUp-C3:01:F8" (2) Aruba-Device-Type = "NOFP" (2) Message-Authenticator = 0x57c8fd066700354386713a22e1b385c7 (2) session-state: No cached attributes (2) # Executing section authorize from file /etc/raddb/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /(a)\./) { (2) if (&User-Name =~ /(a)\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "tom.yates", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 3 length 202 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = eap (2) # Executing group from file /etc/raddb/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0xa07fc9dca17cd0e6 (2) eap: Finished EAP session with state 0xa07fc9dca17cd0e6 (2) eap: Previous EAP request found for state 0xa07fc9dca17cd0e6, released from the list (2) eap: Peer sent packet with method EAP PEAP (25) (2) eap: Calling submodule eap_peap to process data (2) eap_peap: Continuing EAP-TLS (2) eap_peap: Peer indicated complete TLS record size will be 192 bytes (2) eap_peap: Got complete TLS record (192 bytes) (2) eap_peap: [eaptls verify] = length included (2) eap_peap: (other): before/accept initialization (2) eap_peap: TLS_accept: before/accept initialization (2) eap_peap: <<< recv TLS 1.2 [length 00bb] (2) eap_peap: TLS_accept: SSLv3 read client hello A (2) eap_peap: >>> send TLS 1.2 [length 0039] (2) eap_peap: TLS_accept: SSLv3 write server hello A (2) eap_peap: >>> send TLS 1.2 [length 0890] (2) eap_peap: TLS_accept: SSLv3 write certificate A (2) eap_peap: >>> send TLS 1.2 [length 014d] (2) eap_peap: TLS_accept: SSLv3 write key exchange A (2) eap_peap: >>> send TLS 1.2 [length 0004] (2) eap_peap: TLS_accept: SSLv3 write server done A (2) eap_peap: TLS_accept: SSLv3 flush data (2) eap_peap: TLS_accept: SSLv3 read client certificate A (2) eap_peap: TLS_accept: Need to read more data: SSLv3 read client key exchange A (2) eap_peap: TLS_accept: Need to read more data: SSLv3 read client key exchange A (2) eap_peap: In SSL Handshake Phase (2) eap_peap: In SSL Accept mode (2) eap_peap: [eaptls process] = handled (2) eap: Sending EAP Request (code 1) ID 4 length 1004 (2) eap: EAP session adding &reply:State = 0xa07fc9dca27bd0e6 (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) # Executing group from file /etc/raddb/sites-enabled/default (2) Challenge { ... } # empty sub-section is ignored (2) Sent Access-Challenge Id 80 from 192.168.49.23:1812 to 192.168.48.16:58562 length 0 (2) EAP-Message = 0x010403ec19c000000a2e1603030039020000350303da86cb86c6c2b768eafbac85b933efe42b54581ef9cd5a20f6de9d4fc755d63f00c03000000dff01000100000b00040300010216030308900b00088c0008890003c5308203c1308202a9a003020102020103300d06092a864886f70d01010b050030 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0xa07fc9dca27bd0e680005dbd51042520 (2) Finished request Waking up in 4.9 seconds. (3) Received Access-Request Id 81 from 192.168.48.16:58562 to 192.168.49.23:1812 length 225 (3) User-Name = "tom.yates" (3) NAS-IP-Address = 192.168.48.16 (3) NAS-Port = 0 (3) NAS-Identifier = "192.168.48.16" (3) NAS-Port-Type = Wireless-802.11 (3) Calling-Station-Id = "185e0f77d68e" (3) Called-Station-Id = "f42e7fc2e520" (3) Service-Type = Framed-User (3) Framed-MTU = 1100 (3) EAP-Message = 0x020400061900 (3) State = 0xa07fc9dca27bd0e680005dbd51042520 (3) Aruba-Essid-Name = "fangorn2" (3) Aruba-Location-Id = "f4:2e:7f:c2:e5:20" (3) Aruba-AP-Group = "SetMeUp-C3:01:F8" (3) Aruba-Device-Type = "NOFP" (3) Message-Authenticator = 0x741b68acc05edfebc0dd0626a1815ed5 (3) session-state: No cached attributes (3) # Executing section authorize from file /etc/raddb/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /(a)\./) { (3) if (&User-Name =~ /(a)\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "tom.yates", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 4 length 6 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /etc/raddb/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0xa07fc9dca27bd0e6 (3) eap: Finished EAP session with state 0xa07fc9dca27bd0e6 (3) eap: Previous EAP request found for state 0xa07fc9dca27bd0e6, released from the list (3) eap: Peer sent packet with method EAP PEAP (25) (3) eap: Calling submodule eap_peap to process data (3) eap_peap: Continuing EAP-TLS (3) eap_peap: Peer ACKed our handshake fragment (3) eap_peap: [eaptls verify] = request (3) eap_peap: [eaptls process] = handled (3) eap: Sending EAP Request (code 1) ID 5 length 1000 (3) eap: EAP session adding &reply:State = 0xa07fc9dca37ad0e6 (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) # Executing group from file /etc/raddb/sites-enabled/default (3) Challenge { ... } # empty sub-section is ignored (3) Sent Access-Challenge Id 81 from 192.168.49.23:1812 to 192.168.48.16:58562 length 0 (3) EAP-Message = 0x010503e8194078eae5b8f0663ff9f780adaa5e4659917b5b3bdb897d8405648cc4156c25342a8d1d2b50da1e60cbc606972dcccacb880004be308204ba308203a2a003020102020900f689a5e0dadfa15c300d06092a864886f70d01010b0500308185310b3009060355040613024742310f300d060355 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0xa07fc9dca37ad0e680005dbd51042520 (3) Finished request Waking up in 4.8 seconds. (4) Received Access-Request Id 82 from 192.168.48.16:58562 to 192.168.49.23:1812 length 225 (4) User-Name = "tom.yates" (4) NAS-IP-Address = 192.168.48.16 (4) NAS-Port = 0 (4) NAS-Identifier = "192.168.48.16" (4) NAS-Port-Type = Wireless-802.11 (4) Calling-Station-Id = "185e0f77d68e" (4) Called-Station-Id = "f42e7fc2e520" (4) Service-Type = Framed-User (4) Framed-MTU = 1100 (4) EAP-Message = 0x020500061900 (4) State = 0xa07fc9dca37ad0e680005dbd51042520 (4) Aruba-Essid-Name = "fangorn2" (4) Aruba-Location-Id = "f4:2e:7f:c2:e5:20" (4) Aruba-AP-Group = "SetMeUp-C3:01:F8" (4) Aruba-Device-Type = "NOFP" (4) Message-Authenticator = 0x40a24d39210a345c7f6e7f8e1eb33eb2 (4) session-state: No cached attributes (4) # Executing section authorize from file /etc/raddb/sites-enabled/default (4) authorize { (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /(a)\./) { (4) if (&User-Name =~ /(a)\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "tom.yates", looking up realm NULL (4) suffix: No such realm "NULL" (4) [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 5 length 6 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /etc/raddb/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0xa07fc9dca37ad0e6 (4) eap: Finished EAP session with state 0xa07fc9dca37ad0e6 (4) eap: Previous EAP request found for state 0xa07fc9dca37ad0e6, released from the list (4) eap: Peer sent packet with method EAP PEAP (25) (4) eap: Calling submodule eap_peap to process data (4) eap_peap: Continuing EAP-TLS (4) eap_peap: Peer ACKed our handshake fragment (4) eap_peap: [eaptls verify] = request (4) eap_peap: [eaptls process] = handled (4) eap: Sending EAP Request (code 1) ID 6 length 624 (4) eap: EAP session adding &reply:State = 0xa07fc9dca479d0e6 (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) # Executing group from file /etc/raddb/sites-enabled/default (4) Challenge { ... } # empty sub-section is ignored (4) Sent Access-Challenge Id 82 from 192.168.49.23:1812 to 192.168.48.16:58562 length 0 (4) EAP-Message = 0x010602701900864886f70d01010b050003820101001ec2191407b9fbab46db8e32923b5d1ccd14f2f189e73498c6da6c1279d4585efed6b97d906f50b7033ac15c05b4846c82f865332ade66d98897d6438d393718ef023898a943a25eda9583ce9d55ca64f4fe2fe664935e3f8af947ca61f6a321aae3 (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0xa07fc9dca479d0e680005dbd51042520 (4) Finished request Waking up in 4.8 seconds. (5) Received Access-Request Id 83 from 192.168.48.16:58562 to 192.168.49.23:1812 length 355 (5) User-Name = "tom.yates" (5) NAS-IP-Address = 192.168.48.16 (5) NAS-Port = 0 (5) NAS-Identifier = "192.168.48.16" (5) NAS-Port-Type = Wireless-802.11 (5) Calling-Station-Id = "185e0f77d68e" (5) Called-Station-Id = "f42e7fc2e520" (5) Service-Type = Framed-User (5) Framed-MTU = 1100 (5) EAP-Message = 0x0206008819800000007e1603030046100000424104d8fb1311dfa8b17e7fa4cd4f6fd55a66b945471b4511b8fa8eadfdf42ea2a42347e746e5e2f1bba221546692e5460ad7130dfbe1885efb16de44d21bcf3bc00114030300010116030300287feab33215d6773d29b4edf46da4ee539bd2da3fd3e299 (5) State = 0xa07fc9dca479d0e680005dbd51042520 (5) Aruba-Essid-Name = "fangorn2" (5) Aruba-Location-Id = "f4:2e:7f:c2:e5:20" (5) Aruba-AP-Group = "SetMeUp-C3:01:F8" (5) Aruba-Device-Type = "NOFP" (5) Message-Authenticator = 0x28b026dfce74b941698dd2dc9e1e3329 (5) session-state: No cached attributes (5) # Executing section authorize from file /etc/raddb/sites-enabled/default (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /(a)\./) { (5) if (&User-Name =~ /(a)\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) [chap] = noop (5) [mschap] = noop (5) [digest] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "tom.yates", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) eap: Peer sent EAP Response (code 2) ID 6 length 136 (5) eap: Continuing tunnel setup (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /etc/raddb/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0xa07fc9dca479d0e6 (5) eap: Finished EAP session with state 0xa07fc9dca479d0e6 (5) eap: Previous EAP request found for state 0xa07fc9dca479d0e6, released from the list (5) eap: Peer sent packet with method EAP PEAP (25) (5) eap: Calling submodule eap_peap to process data (5) eap_peap: Continuing EAP-TLS (5) eap_peap: Peer indicated complete TLS record size will be 126 bytes (5) eap_peap: Got complete TLS record (126 bytes) (5) eap_peap: [eaptls verify] = length included (5) eap_peap: <<< recv TLS 1.2 [length 0046] (5) eap_peap: TLS_accept: SSLv3 read client key exchange A (5) eap_peap: TLS_accept: SSLv3 read certificate verify A (5) eap_peap: <<< recv TLS 1.2 [length 0001] (5) eap_peap: <<< recv TLS 1.2 [length 0010] (5) eap_peap: TLS_accept: SSLv3 read finished A (5) eap_peap: >>> send TLS 1.2 [length 0001] (5) eap_peap: TLS_accept: SSLv3 write change cipher spec A (5) eap_peap: >>> send TLS 1.2 [length 0010] (5) eap_peap: TLS_accept: SSLv3 write finished A (5) eap_peap: TLS_accept: SSLv3 flush data (5) eap_peap: (other): SSL negotiation finished successfully (5) eap_peap: SSL Connection Established (5) eap_peap: [eaptls process] = handled (5) eap: Sending EAP Request (code 1) ID 7 length 57 (5) eap: EAP session adding &reply:State = 0xa07fc9dca578d0e6 (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) # Executing group from file /etc/raddb/sites-enabled/default (5) Challenge { ... } # empty sub-section is ignored (5) Sent Access-Challenge Id 83 from 192.168.49.23:1812 to 192.168.48.16:58562 length 0 (5) EAP-Message = 0x0107003919001403030001011603030028192ab2f252f3b0b5938be07bece4b288d6216d6f2fe997e950c3fd05ee231782e3273eaadde13910 (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0xa07fc9dca578d0e680005dbd51042520 (5) Finished request Waking up in 4.8 seconds. (6) Received Access-Request Id 84 from 192.168.48.16:58562 to 192.168.49.23:1812 length 225 (6) User-Name = "tom.yates" (6) NAS-IP-Address = 192.168.48.16 (6) NAS-Port = 0 (6) NAS-Identifier = "192.168.48.16" (6) NAS-Port-Type = Wireless-802.11 (6) Calling-Station-Id = "185e0f77d68e" (6) Called-Station-Id = "f42e7fc2e520" (6) Service-Type = Framed-User (6) Framed-MTU = 1100 (6) EAP-Message = 0x020700061900 (6) State = 0xa07fc9dca578d0e680005dbd51042520 (6) Aruba-Essid-Name = "fangorn2" (6) Aruba-Location-Id = "f4:2e:7f:c2:e5:20" (6) Aruba-AP-Group = "SetMeUp-C3:01:F8" (6) Aruba-Device-Type = "NOFP" (6) Message-Authenticator = 0xac609c4e0f69729211d71ade3e01f633 (6) session-state: No cached attributes (6) # Executing section authorize from file /etc/raddb/sites-enabled/default (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /(a)\./) { (6) if (&User-Name =~ /(a)\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [preprocess] = ok (6) [chap] = noop (6) [mschap] = noop (6) [digest] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "tom.yates", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) eap: Peer sent EAP Response (code 2) ID 7 length 6 (6) eap: Continuing tunnel setup (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /etc/raddb/sites-enabled/default (6) authenticate { (6) eap: Expiring EAP session with state 0xa07fc9dca578d0e6 (6) eap: Finished EAP session with state 0xa07fc9dca578d0e6 (6) eap: Previous EAP request found for state 0xa07fc9dca578d0e6, released from the list (6) eap: Peer sent packet with method EAP PEAP (25) (6) eap: Calling submodule eap_peap to process data (6) eap_peap: Continuing EAP-TLS (6) eap_peap: Peer ACKed our handshake fragment. handshake is finished (6) eap_peap: [eaptls verify] = success (6) eap_peap: [eaptls process] = success (6) eap_peap: Session established. Decoding tunneled attributes (6) eap_peap: PEAP state TUNNEL ESTABLISHED (6) eap: Sending EAP Request (code 1) ID 8 length 40 (6) eap: EAP session adding &reply:State = 0xa07fc9dca677d0e6 (6) [eap] = handled (6) } # authenticate = handled (6) Using Post-Auth-Type Challenge (6) # Executing group from file /etc/raddb/sites-enabled/default (6) Challenge { ... } # empty sub-section is ignored (6) Sent Access-Challenge Id 84 from 192.168.49.23:1812 to 192.168.48.16:58562 length 0 (6) EAP-Message = 0x010800281900170303001d192ab2f252f3b0b6a369609cbaa14df410d7c96d8ecf737d83d3b9b272 (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0xa07fc9dca677d0e680005dbd51042520 (6) Finished request Waking up in 4.7 seconds. (7) Received Access-Request Id 85 from 192.168.48.16:58562 to 192.168.49.23:1812 length 264 (7) User-Name = "tom.yates" (7) NAS-IP-Address = 192.168.48.16 (7) NAS-Port = 0 (7) NAS-Identifier = "192.168.48.16" (7) NAS-Port-Type = Wireless-802.11 (7) Calling-Station-Id = "185e0f77d68e" (7) Called-Station-Id = "f42e7fc2e520" (7) Service-Type = Framed-User (7) Framed-MTU = 1100 (7) EAP-Message = 0x0208002d190017030300227feab33215d6773e709a5af6712abfbc2a1bbc6dfe3c334d443618d3d33f6d302223 (7) State = 0xa07fc9dca677d0e680005dbd51042520 (7) Aruba-Essid-Name = "fangorn2" (7) Aruba-Location-Id = "f4:2e:7f:c2:e5:20" (7) Aruba-AP-Group = "SetMeUp-C3:01:F8" (7) Aruba-Device-Type = "NOFP" (7) Message-Authenticator = 0x47acff8723fab40cc12d833733336cf4 (7) session-state: No cached attributes (7) # Executing section authorize from file /etc/raddb/sites-enabled/default (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /(a)\./) { (7) if (&User-Name =~ /(a)\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [preprocess] = ok (7) [chap] = noop (7) [mschap] = noop (7) [digest] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "tom.yates", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) eap: Peer sent EAP Response (code 2) ID 8 length 45 (7) eap: Continuing tunnel setup (7) [eap] = ok (7) } # authorize = ok (7) Found Auth-Type = eap (7) # Executing group from file /etc/raddb/sites-enabled/default (7) authenticate { (7) eap: Expiring EAP session with state 0xa07fc9dca677d0e6 (7) eap: Finished EAP session with state 0xa07fc9dca677d0e6 (7) eap: Previous EAP request found for state 0xa07fc9dca677d0e6, released from the list (7) eap: Peer sent packet with method EAP PEAP (25) (7) eap: Calling submodule eap_peap to process data (7) eap_peap: Continuing EAP-TLS (7) eap_peap: [eaptls verify] = ok (7) eap_peap: Done initial handshake (7) eap_peap: [eaptls process] = ok (7) eap_peap: Session established. Decoding tunneled attributes (7) eap_peap: PEAP state WAITING FOR INNER IDENTITY (7) eap_peap: Identity - tom.yates (7) eap_peap: Got inner identity 'tom.yates' (7) eap_peap: Setting default EAP type for tunneled EAP session (7) eap_peap: Got tunneled request (7) eap_peap: EAP-Message = 0x0208000e01746f6d2e7961746573 (7) eap_peap: Setting User-Name to tom.yates (7) eap_peap: Sending tunneled request to inner-tunnel (7) eap_peap: EAP-Message = 0x0208000e01746f6d2e7961746573 (7) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (7) eap_peap: User-Name = "tom.yates" (7) Virtual server inner-tunnel received request (7) EAP-Message = 0x0208000e01746f6d2e7961746573 (7) FreeRADIUS-Proxied-To = 127.0.0.1 (7) User-Name = "tom.yates" (7) WARNING: Outer and inner identities are the same. User privacy is compromised. (7) server inner-tunnel { (7) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /(a)\./) { (7) if (&User-Name =~ /(a)\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [chap] = noop (7) [mschap] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "tom.yates", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) update control { (7) &Proxy-To-Realm := LOCAL (7) } # update control = noop (7) eap: Peer sent EAP Response (code 2) ID 8 length 14 (7) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (7) [eap] = ok (7) } # authorize = ok (7) Found Auth-Type = eap (7) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (7) authenticate { (7) eap: Peer sent packet with method EAP Identity (1) (7) eap: Calling submodule eap_mschapv2 to process data (7) eap_mschapv2: Issuing Challenge (7) eap: Sending EAP Request (code 1) ID 9 length 43 (7) eap: EAP session adding &reply:State = 0x1010a47b1019be78 (7) [eap] = handled (7) } # authenticate = handled (7) } # server inner-tunnel (7) Virtual server sending reply (7) EAP-Message = 0x0109002b1a01090026102555ff5f1f4c6e4ccf5f5651aba6ac73667265657261646975732d332e302e3133 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0x1010a47b1019be78c762286715e03979 (7) eap_peap: Got tunneled reply code 11 (7) eap_peap: EAP-Message = 0x0109002b1a01090026102555ff5f1f4c6e4ccf5f5651aba6ac73667265657261646975732d332e302e3133 (7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_peap: State = 0x1010a47b1019be78c762286715e03979 (7) eap_peap: Got tunneled reply RADIUS code 11 (7) eap_peap: EAP-Message = 0x0109002b1a01090026102555ff5f1f4c6e4ccf5f5651aba6ac73667265657261646975732d332e302e3133 (7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_peap: State = 0x1010a47b1019be78c762286715e03979 (7) eap_peap: Got tunneled Access-Challenge (7) eap: Sending EAP Request (code 1) ID 9 length 74 (7) eap: EAP session adding &reply:State = 0xa07fc9dca776d0e6 (7) [eap] = handled (7) } # authenticate = handled (7) Using Post-Auth-Type Challenge (7) # Executing group from file /etc/raddb/sites-enabled/default (7) Challenge { ... } # empty sub-section is ignored (7) Sent Access-Challenge Id 85 from 192.168.49.23:1812 to 192.168.48.16:58562 length 0 (7) EAP-Message = 0x0109004a1900170303003f192ab2f252f3b0b7dcd4651c05a4d2833a0c629f344641dd33b5a87c6b28329c49354c7760be8b9fda5086c759aada5b044ed2a0c42dffd5d13d87dc46cf1e (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0xa07fc9dca776d0e680005dbd51042520 (7) Finished request Waking up in 4.7 seconds. (8) Received Access-Request Id 86 from 192.168.48.16:58562 to 192.168.49.23:1812 length 318 (8) User-Name = "tom.yates" (8) NAS-IP-Address = 192.168.48.16 (8) NAS-Port = 0 (8) NAS-Identifier = "192.168.48.16" (8) NAS-Port-Type = Wireless-802.11 (8) Calling-Station-Id = "185e0f77d68e" (8) Called-Station-Id = "f42e7fc2e520" (8) Service-Type = Framed-User (8) Framed-MTU = 1100 (8) EAP-Message = 0x02090063190017030300587feab33215d6773f18a06314afbe1bf9a1a44702aa0d036ebeca4a65a00acbc9c8a6a83fb6099a205483f2ecb7ee46de4626b98f0f84c971d633423c544d0db6847a8850fa3d3aac2252f5b113d6268332029d5b4c1381d7 (8) State = 0xa07fc9dca776d0e680005dbd51042520 (8) Aruba-Essid-Name = "fangorn2" (8) Aruba-Location-Id = "f4:2e:7f:c2:e5:20" (8) Aruba-AP-Group = "SetMeUp-C3:01:F8" (8) Aruba-Device-Type = "NOFP" (8) Message-Authenticator = 0x342d08093015e212d905c371421c0e02 (8) session-state: No cached attributes (8) # Executing section authorize from file /etc/raddb/sites-enabled/default (8) authorize { (8) policy filter_username { (8) if (&User-Name) { (8) if (&User-Name) -> TRUE (8) if (&User-Name) { (8) if (&User-Name =~ / /) { (8) if (&User-Name =~ / /) -> FALSE (8) if (&User-Name =~ /@[^@]*@/ ) { (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (8) if (&User-Name =~ /\.\./ ) { (8) if (&User-Name =~ /\.\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\.$/) { (8) if (&User-Name =~ /\.$/) -> FALSE (8) if (&User-Name =~ /(a)\./) { (8) if (&User-Name =~ /(a)\./) -> FALSE (8) } # if (&User-Name) = notfound (8) } # policy filter_username = notfound (8) [preprocess] = ok (8) [chap] = noop (8) [mschap] = noop (8) [digest] = noop (8) suffix: Checking for suffix after "@" (8) suffix: No '@' in User-Name = "tom.yates", looking up realm NULL (8) suffix: No such realm "NULL" (8) [suffix] = noop (8) eap: Peer sent EAP Response (code 2) ID 9 length 99 (8) eap: Continuing tunnel setup (8) [eap] = ok (8) } # authorize = ok (8) Found Auth-Type = eap (8) # Executing group from file /etc/raddb/sites-enabled/default (8) authenticate { (8) eap: Expiring EAP session with state 0x1010a47b1019be78 (8) eap: Finished EAP session with state 0xa07fc9dca776d0e6 (8) eap: Previous EAP request found for state 0xa07fc9dca776d0e6, released from the list (8) eap: Peer sent packet with method EAP PEAP (25) (8) eap: Calling submodule eap_peap to process data (8) eap_peap: Continuing EAP-TLS (8) eap_peap: [eaptls verify] = ok (8) eap_peap: Done initial handshake (8) eap_peap: [eaptls process] = ok (8) eap_peap: Session established. Decoding tunneled attributes (8) eap_peap: PEAP state phase2 (8) eap_peap: EAP method MSCHAPv2 (26) (8) eap_peap: Got tunneled request (8) eap_peap: EAP-Message = 0x020900441a0209003f3102bfec60e2b54b220e3a4b660efad107000000000000000060b848ff1a1043ef4b55474a96318af7e165fac06373760100746f6d2e7961746573 (8) eap_peap: Setting User-Name to tom.yates (8) eap_peap: Sending tunneled request to inner-tunnel (8) eap_peap: EAP-Message = 0x020900441a0209003f3102bfec60e2b54b220e3a4b660efad107000000000000000060b848ff1a1043ef4b55474a96318af7e165fac06373760100746f6d2e7961746573 (8) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (8) eap_peap: User-Name = "tom.yates" (8) eap_peap: State = 0x1010a47b1019be78c762286715e03979 (8) Virtual server inner-tunnel received request (8) EAP-Message = 0x020900441a0209003f3102bfec60e2b54b220e3a4b660efad107000000000000000060b848ff1a1043ef4b55474a96318af7e165fac06373760100746f6d2e7961746573 (8) FreeRADIUS-Proxied-To = 127.0.0.1 (8) User-Name = "tom.yates" (8) State = 0x1010a47b1019be78c762286715e03979 (8) WARNING: Outer and inner identities are the same. User privacy is compromised. (8) server inner-tunnel { (8) session-state: No cached attributes (8) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel (8) authorize { (8) policy filter_username { (8) if (&User-Name) { (8) if (&User-Name) -> TRUE (8) if (&User-Name) { (8) if (&User-Name =~ / /) { (8) if (&User-Name =~ / /) -> FALSE (8) if (&User-Name =~ /@[^@]*@/ ) { (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (8) if (&User-Name =~ /\.\./ ) { (8) if (&User-Name =~ /\.\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\.$/) { (8) if (&User-Name =~ /\.$/) -> FALSE (8) if (&User-Name =~ /(a)\./) { (8) if (&User-Name =~ /(a)\./) -> FALSE (8) } # if (&User-Name) = notfound (8) } # policy filter_username = notfound (8) [chap] = noop (8) [mschap] = noop (8) suffix: Checking for suffix after "@" (8) suffix: No '@' in User-Name = "tom.yates", looking up realm NULL (8) suffix: No such realm "NULL" (8) [suffix] = noop (8) update control { (8) &Proxy-To-Realm := LOCAL (8) } # update control = noop (8) eap: Peer sent EAP Response (code 2) ID 9 length 68 (8) eap: No EAP Start, assuming it's an on-going EAP conversation (8) [eap] = updated (8) files: users: Matched entry tom.yates at line 95 (8) [files] = ok (8) [expiration] = noop (8) [logintime] = noop (8) pap: WARNING: Auth-Type already set. Not setting to PAP (8) [pap] = noop (8) } # authorize = updated (8) Found Auth-Type = eap (8) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (8) authenticate { (8) eap: Expiring EAP session with state 0x1010a47b1019be78 (8) eap: Finished EAP session with state 0x1010a47b1019be78 (8) eap: Previous EAP request found for state 0x1010a47b1019be78, released from the list (8) eap: Peer sent packet with method EAP MSCHAPv2 (26) (8) eap: Calling submodule eap_mschapv2 to process data (8) eap_mschapv2: # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (8) eap_mschapv2: authenticate { (8) mschap: Found Cleartext-Password, hashing to create NT-Password (8) mschap: Found Cleartext-Password, hashing to create LM-Password (8) mschap: Creating challenge hash with username: tom.yates (8) mschap: Client is using MS-CHAPv2 (8) mschap: Adding MS-CHAPv2 MPPE keys (8) [mschap] = ok (8) } # authenticate = ok (8) MSCHAP Success (8) eap: Sending EAP Request (code 1) ID 10 length 51 (8) eap: EAP session adding &reply:State = 0x1010a47b111abe78 (8) [eap] = handled (8) } # authenticate = handled (8) } # server inner-tunnel (8) Virtual server sending reply (8) Tunnel-Type = VLAN (8) Tunnel-Medium-Type = IEEE-802 (8) Tunnel-Private-Group-Id = "55" (8) EAP-Message = 0x010a00331a0309002e533d46423644413436414234463542353534344132444245324141333442423445343242374142313334 (8) Message-Authenticator = 0x00000000000000000000000000000000 (8) State = 0x1010a47b111abe78c762286715e03979 (8) eap_peap: Got tunneled reply code 11 (8) eap_peap: Tunnel-Type = VLAN (8) eap_peap: Tunnel-Medium-Type = IEEE-802 (8) eap_peap: Tunnel-Private-Group-Id = "55" (8) eap_peap: EAP-Message = 0x010a00331a0309002e533d46423644413436414234463542353534344132444245324141333442423445343242374142313334 (8) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (8) eap_peap: State = 0x1010a47b111abe78c762286715e03979 (8) eap_peap: Got tunneled reply RADIUS code 11 (8) eap_peap: Tunnel-Type = VLAN (8) eap_peap: Tunnel-Medium-Type = IEEE-802 (8) eap_peap: Tunnel-Private-Group-Id = "55" (8) eap_peap: EAP-Message = 0x010a00331a0309002e533d46423644413436414234463542353534344132444245324141333442423445343242374142313334 (8) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (8) eap_peap: State = 0x1010a47b111abe78c762286715e03979 (8) eap_peap: Got tunneled Access-Challenge (8) eap: Sending EAP Request (code 1) ID 10 length 82 (8) eap: EAP session adding &reply:State = 0xa07fc9dca875d0e6 (8) [eap] = handled (8) } # authenticate = handled (8) Using Post-Auth-Type Challenge (8) # Executing group from file /etc/raddb/sites-enabled/default (8) Challenge { ... } # empty sub-section is ignored (8) Sent Access-Challenge Id 86 from 192.168.49.23:1812 to 192.168.48.16:58562 length 0 (8) EAP-Message = 0x010a005219001703030047192ab2f252f3b0b83b40277c289ef2e5943ac708faf5bcff67a204d848ea9c3f83a4942708fca40a52d98ad9e74bfddfbcde12f872c230224ed3d43e36cd12a9db6cadee57bc60 (8) Message-Authenticator = 0x00000000000000000000000000000000 (8) State = 0xa07fc9dca875d0e680005dbd51042520 (8) Finished request Waking up in 4.7 seconds. (9) Received Access-Request Id 87 from 192.168.48.16:58562 to 192.168.49.23:1812 length 256 (9) User-Name = "tom.yates" (9) NAS-IP-Address = 192.168.48.16 (9) NAS-Port = 0 (9) NAS-Identifier = "192.168.48.16" (9) NAS-Port-Type = Wireless-802.11 (9) Calling-Station-Id = "185e0f77d68e" (9) Called-Station-Id = "f42e7fc2e520" (9) Service-Type = Framed-User (9) Framed-MTU = 1100 (9) EAP-Message = 0x020a00251900170303001a7feab33215d67740011325d1bec9932e8a5fdc2392caa4aaadb6 (9) State = 0xa07fc9dca875d0e680005dbd51042520 (9) Aruba-Essid-Name = "fangorn2" (9) Aruba-Location-Id = "f4:2e:7f:c2:e5:20" (9) Aruba-AP-Group = "SetMeUp-C3:01:F8" (9) Aruba-Device-Type = "NOFP" (9) Message-Authenticator = 0x7ac9d99eb1cb786653df67edf2d07365 (9) session-state: No cached attributes (9) # Executing section authorize from file /etc/raddb/sites-enabled/default (9) authorize { (9) policy filter_username { (9) if (&User-Name) { (9) if (&User-Name) -> TRUE (9) if (&User-Name) { (9) if (&User-Name =~ / /) { (9) if (&User-Name =~ / /) -> FALSE (9) if (&User-Name =~ /@[^@]*@/ ) { (9) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (9) if (&User-Name =~ /\.\./ ) { (9) if (&User-Name =~ /\.\./ ) -> FALSE (9) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (9) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (9) if (&User-Name =~ /\.$/) { (9) if (&User-Name =~ /\.$/) -> FALSE (9) if (&User-Name =~ /(a)\./) { (9) if (&User-Name =~ /(a)\./) -> FALSE (9) } # if (&User-Name) = notfound (9) } # policy filter_username = notfound (9) [preprocess] = ok (9) [chap] = noop (9) [mschap] = noop (9) [digest] = noop (9) suffix: Checking for suffix after "@" (9) suffix: No '@' in User-Name = "tom.yates", looking up realm NULL (9) suffix: No such realm "NULL" (9) [suffix] = noop (9) eap: Peer sent EAP Response (code 2) ID 10 length 37 (9) eap: Continuing tunnel setup (9) [eap] = ok (9) } # authorize = ok (9) Found Auth-Type = eap (9) # Executing group from file /etc/raddb/sites-enabled/default (9) authenticate { (9) eap: Expiring EAP session with state 0x1010a47b111abe78 (9) eap: Finished EAP session with state 0xa07fc9dca875d0e6 (9) eap: Previous EAP request found for state 0xa07fc9dca875d0e6, released from the list (9) eap: Peer sent packet with method EAP PEAP (25) (9) eap: Calling submodule eap_peap to process data (9) eap_peap: Continuing EAP-TLS (9) eap_peap: [eaptls verify] = ok (9) eap_peap: Done initial handshake (9) eap_peap: [eaptls process] = ok (9) eap_peap: Session established. Decoding tunneled attributes (9) eap_peap: PEAP state phase2 (9) eap_peap: EAP method MSCHAPv2 (26) (9) eap_peap: Got tunneled request (9) eap_peap: EAP-Message = 0x020a00061a03 (9) eap_peap: Setting User-Name to tom.yates (9) eap_peap: Sending tunneled request to inner-tunnel (9) eap_peap: EAP-Message = 0x020a00061a03 (9) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (9) eap_peap: User-Name = "tom.yates" (9) eap_peap: State = 0x1010a47b111abe78c762286715e03979 (9) Virtual server inner-tunnel received request (9) EAP-Message = 0x020a00061a03 (9) FreeRADIUS-Proxied-To = 127.0.0.1 (9) User-Name = "tom.yates" (9) State = 0x1010a47b111abe78c762286715e03979 (9) WARNING: Outer and inner identities are the same. User privacy is compromised. (9) server inner-tunnel { (9) session-state: No cached attributes (9) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel (9) authorize { (9) policy filter_username { (9) if (&User-Name) { (9) if (&User-Name) -> TRUE (9) if (&User-Name) { (9) if (&User-Name =~ / /) { (9) if (&User-Name =~ / /) -> FALSE (9) if (&User-Name =~ /@[^@]*@/ ) { (9) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (9) if (&User-Name =~ /\.\./ ) { (9) if (&User-Name =~ /\.\./ ) -> FALSE (9) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (9) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (9) if (&User-Name =~ /\.$/) { (9) if (&User-Name =~ /\.$/) -> FALSE (9) if (&User-Name =~ /(a)\./) { (9) if (&User-Name =~ /(a)\./) -> FALSE (9) } # if (&User-Name) = notfound (9) } # policy filter_username = notfound (9) [chap] = noop (9) [mschap] = noop (9) suffix: Checking for suffix after "@" (9) suffix: No '@' in User-Name = "tom.yates", looking up realm NULL (9) suffix: No such realm "NULL" (9) [suffix] = noop (9) update control { (9) &Proxy-To-Realm := LOCAL (9) } # update control = noop (9) eap: Peer sent EAP Response (code 2) ID 10 length 6 (9) eap: No EAP Start, assuming it's an on-going EAP conversation (9) [eap] = updated (9) files: users: Matched entry tom.yates at line 95 (9) [files] = ok (9) [expiration] = noop (9) [logintime] = noop (9) pap: WARNING: Auth-Type already set. Not setting to PAP (9) [pap] = noop (9) } # authorize = updated (9) Found Auth-Type = eap (9) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (9) authenticate { (9) eap: Expiring EAP session with state 0x1010a47b111abe78 (9) eap: Finished EAP session with state 0x1010a47b111abe78 (9) eap: Previous EAP request found for state 0x1010a47b111abe78, released from the list (9) eap: Peer sent packet with method EAP MSCHAPv2 (26) (9) eap: Calling submodule eap_mschapv2 to process data (9) eap: Sending EAP Success (code 3) ID 10 length 4 (9) eap: Freeing handler (9) [eap] = ok (9) } # authenticate = ok (9) # Executing section post-auth from file /etc/raddb/sites-enabled/inner-tunnel (9) post-auth { (9) if (0) { (9) if (0) -> FALSE (9) } # post-auth = noop (9) Login OK: [tom.yates] (from client private-network-1 port 0 via TLS tunnel) (9) } # server inner-tunnel (9) Virtual server sending reply (9) Tunnel-Type = VLAN (9) Tunnel-Medium-Type = IEEE-802 (9) Tunnel-Private-Group-Id = "55" (9) MS-MPPE-Encryption-Policy = Encryption-Allowed (9) MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed (9) MS-MPPE-Send-Key = 0xb41ba4f39e9aed70cda43fecdaf4e9f5 (9) MS-MPPE-Recv-Key = 0x1b673054a7d732aae1658862d26342d4 (9) EAP-Message = 0x030a0004 (9) Message-Authenticator = 0x00000000000000000000000000000000 (9) User-Name = "tom.yates" (9) eap_peap: Got tunneled reply code 2 (9) eap_peap: Tunnel-Type = VLAN (9) eap_peap: Tunnel-Medium-Type = IEEE-802 (9) eap_peap: Tunnel-Private-Group-Id = "55" (9) eap_peap: MS-MPPE-Encryption-Policy = Encryption-Allowed (9) eap_peap: MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed (9) eap_peap: MS-MPPE-Send-Key = 0xb41ba4f39e9aed70cda43fecdaf4e9f5 (9) eap_peap: MS-MPPE-Recv-Key = 0x1b673054a7d732aae1658862d26342d4 (9) eap_peap: EAP-Message = 0x030a0004 (9) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (9) eap_peap: User-Name = "tom.yates" (9) eap_peap: Got tunneled reply RADIUS code 2 (9) eap_peap: Tunnel-Type = VLAN (9) eap_peap: Tunnel-Medium-Type = IEEE-802 (9) eap_peap: Tunnel-Private-Group-Id = "55" (9) eap_peap: MS-MPPE-Encryption-Policy = Encryption-Allowed (9) eap_peap: MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed (9) eap_peap: MS-MPPE-Send-Key = 0xb41ba4f39e9aed70cda43fecdaf4e9f5 (9) eap_peap: MS-MPPE-Recv-Key = 0x1b673054a7d732aae1658862d26342d4 (9) eap_peap: EAP-Message = 0x030a0004 (9) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (9) eap_peap: User-Name = "tom.yates" (9) eap_peap: Tunneled authentication was successful (9) eap_peap: SUCCESS (9) eap: Sending EAP Request (code 1) ID 11 length 46 (9) eap: EAP session adding &reply:State = 0xa07fc9dca974d0e6 (9) [eap] = handled (9) } # authenticate = handled (9) Using Post-Auth-Type Challenge (9) # Executing group from file /etc/raddb/sites-enabled/default (9) Challenge { ... } # empty sub-section is ignored (9) Sent Access-Challenge Id 87 from 192.168.49.23:1812 to 192.168.48.16:58562 length 0 (9) EAP-Message = 0x010b002e19001703030023192ab2f252f3b0b92bee3e821ba06baaa365106eed7f1b5c8c0d55f2a6159a04928c3e (9) Message-Authenticator = 0x00000000000000000000000000000000 (9) State = 0xa07fc9dca974d0e680005dbd51042520 (9) Finished request Waking up in 4.6 seconds. (10) Received Access-Request Id 88 from 192.168.48.16:58562 to 192.168.49.23:1812 length 265 (10) User-Name = "tom.yates" (10) NAS-IP-Address = 192.168.48.16 (10) NAS-Port = 0 (10) NAS-Identifier = "192.168.48.16" (10) NAS-Port-Type = Wireless-802.11 (10) Calling-Station-Id = "185e0f77d68e" (10) Called-Station-Id = "f42e7fc2e520" (10) Service-Type = Framed-User (10) Framed-MTU = 1100 (10) EAP-Message = 0x020b002e190017030300237feab33215d677410320d1f109b7b865f5e84c2f30427e677eae455549d6cf4074c656 (10) State = 0xa07fc9dca974d0e680005dbd51042520 (10) Aruba-Essid-Name = "fangorn2" (10) Aruba-Location-Id = "f4:2e:7f:c2:e5:20" (10) Aruba-AP-Group = "SetMeUp-C3:01:F8" (10) Aruba-Device-Type = "NOFP" (10) Message-Authenticator = 0x830e1fd5d6ce06ee1fa99eaf88f42bd5 (10) session-state: No cached attributes (10) # Executing section authorize from file /etc/raddb/sites-enabled/default (10) authorize { (10) policy filter_username { (10) if (&User-Name) { (10) if (&User-Name) -> TRUE (10) if (&User-Name) { (10) if (&User-Name =~ / /) { (10) if (&User-Name =~ / /) -> FALSE (10) if (&User-Name =~ /@[^@]*@/ ) { (10) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (10) if (&User-Name =~ /\.\./ ) { (10) if (&User-Name =~ /\.\./ ) -> FALSE (10) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (10) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (10) if (&User-Name =~ /\.$/) { (10) if (&User-Name =~ /\.$/) -> FALSE (10) if (&User-Name =~ /(a)\./) { (10) if (&User-Name =~ /(a)\./) -> FALSE (10) } # if (&User-Name) = notfound (10) } # policy filter_username = notfound (10) [preprocess] = ok (10) [chap] = noop (10) [mschap] = noop (10) [digest] = noop (10) suffix: Checking for suffix after "@" (10) suffix: No '@' in User-Name = "tom.yates", looking up realm NULL (10) suffix: No such realm "NULL" (10) [suffix] = noop (10) eap: Peer sent EAP Response (code 2) ID 11 length 46 (10) eap: Continuing tunnel setup (10) [eap] = ok (10) } # authorize = ok (10) Found Auth-Type = eap (10) # Executing group from file /etc/raddb/sites-enabled/default (10) authenticate { (10) eap: Expiring EAP session with state 0xa07fc9dca974d0e6 (10) eap: Finished EAP session with state 0xa07fc9dca974d0e6 (10) eap: Previous EAP request found for state 0xa07fc9dca974d0e6, released from the list (10) eap: Peer sent packet with method EAP PEAP (25) (10) eap: Calling submodule eap_peap to process data (10) eap_peap: Continuing EAP-TLS (10) eap_peap: [eaptls verify] = ok (10) eap_peap: Done initial handshake (10) eap_peap: [eaptls process] = ok (10) eap_peap: Session established. Decoding tunneled attributes (10) eap_peap: PEAP state send tlv success (10) eap_peap: Received EAP-TLV response (10) eap_peap: Success (10) eap: Sending EAP Success (code 3) ID 11 length 4 (10) eap: Freeing handler (10) [eap] = ok (10) } # authenticate = ok (10) # Executing section post-auth from file /etc/raddb/sites-enabled/default (10) post-auth { (10) update { (10) No attributes updated (10) } # update = noop (10) [exec] = noop (10) policy remove_reply_message_if_eap { (10) if (&reply:EAP-Message && &reply:Reply-Message) { (10) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (10) else { (10) [noop] = noop (10) } # else = noop (10) } # policy remove_reply_message_if_eap = noop (10) } # post-auth = noop (10) Login OK: [tom.yates] (from client private-network-1 port 0 cli 185e0f77d68e) (10) Sent Access-Accept Id 88 from 192.168.49.23:1812 to 192.168.48.16:58562 length 0 (10) MS-MPPE-Recv-Key = 0xaf37ad058d86f225bdba2cfb636db21bd1f198057e913e3a7abe65337a2c699b (10) MS-MPPE-Send-Key = 0x3fb04d03dcdda495bdbbf3dd9797619ee760414d40f1e818553a6290f3c2f362 (10) EAP-Message = 0x030b0004 (10) Message-Authenticator = 0x00000000000000000000000000000000 (10) User-Name = "tom.yates" (10) Finished request Waking up in 4.6 seconds. (0) Cleaning up request packet ID 78 with timestamp +13 (1) Cleaning up request packet ID 79 with timestamp +13 (2) Cleaning up request packet ID 80 with timestamp +13 (3) Cleaning up request packet ID 81 with timestamp +14 (4) Cleaning up request packet ID 82 with timestamp +14 (5) Cleaning up request packet ID 83 with timestamp +14 (6) Cleaning up request packet ID 84 with timestamp +14 (7) Cleaning up request packet ID 85 with timestamp +14 (8) Cleaning up request packet ID 86 with timestamp +14 (9) Cleaning up request packet ID 87 with timestamp +14 (10) Cleaning up request packet ID 88 with timestamp +14 Ready to process requests -- Tom Yates - http://www.teaparty.net

5 10

Freeradius and deploying client certificates for Windows OS
by Vieri Di Paola 05 May '21

05 May '21

Hi, I'm currently using FreeRADIUS and self-signed certificates with openssl on the same server to authenticate clients with EAP-TLS. Most of these clients run MS Windows. The problem I'm facing is how to easily manage deploying the client certificates. The custom Certificate Authority has already been deployed with Active Directory Group Policy. Each time I want a new client to authenticate I need to manually import the client certificate in the Windows host via "mmc". Is there a way to automatically deploy the client certificates (eg. when a Windows client joins an AD)? Should I stop using openssl on the FreeRADIUS server and use MS Certification Authority instead? Will I have compatibility issues if I do that? Can I keep using openssl certs but with a non-interactive way of deploying them? Thanks, Vieri

3 7

Freeradius 3.0 Radacct
by juliana sales porto 04 May '21

04 May '21

Hi everyone, I am facing a problem. I have deployed a freeradius server version 3.0 with MySQL in Ubuntu (20.04). There are the respective versions of the radius and MySQL: mysql Ver 8.0.23-0ubuntu0.20.04.1 for Linux on x86_64 ((Ubuntu)) radiusd: FreeRADIUS Version 3.0.20, for host x86_64-pc-linux-gnu FreeRADIUS Version 3.0.20 My situation is: from a mobile phone I need to connect to an access point and authenticate to that WLAN network (802.11i-WPA-802.1x) using a username and password specified in the radius database. I would like to know why there is a new table radpostauth. Actually I don't know if this is a new table, but I have a old freeradius server where this specifications: FreeRADIUS Version 2.1.12, for host x86_64-pc-linux-gnu, built on Jul 26 2017 at 15:30:42 and mysql Ver 14.14 Distrib 5.5.49, for debian-linux-gnu (x86_64) using readline 6.3. This server didn't has this table (radpostauth), and for some reason when I installed the new server with freeradius updates and mysql the table Radacct doesn't have any information. Is empty! I would like to know why this is happening and why I can't receive inserts on Radacct Att, Juliana Porto

3 2