- Freeradius-Users - lists.freeradius.org

sha128 or sha256 support?
by Honglak Kim 27 May '21

27 May '21

Hello, Does FreeRadius support sha128 or sha256 for the user encrypted password?We are using the internet to communicate between the radius server and network devices.Therefore more strong encrypted password method seems necessary. Thanks a lot,Paul

3 5

Handling unreliable proxy partners
by paul.moser＠bt.com 27 May '21

27 May '21

We proxy a lot of authentication to radius servers that we do not manage/control. In a number of failure scenarios in order to maintain a good customer experience it is better for us to give access to the network even though we can't authenticate the users so customers continue to receive service even if that means giving some non-customer access. We might restrict the length of these sessions or turn on QoS restrictions. Using fallback virtual servers and (in non fallback virtual servers) Post-Proxy-Type Fail-Authentication allows us to handle the cases where no radius servers are responding for a partner or proxying of a single request fails, by returning an access-accept ourselves and automatically kicks in when one of those situations presents itself. Any common radius attributes that need to be set to put restrictions on those sessions can be put in a policy and called from each section rather than duplicating code. This works well. We'd also like a manual mechanism that our support team can trigger to cover other failure scenarios, eg the remote radius server is incorrectly returning access-reject for all valid users, and those scenarios that we haven't been able to think of but will occur, inevitably at the most inconvenient of times. My first attempt at this was that the support team could use radmin to set the home servers to dead which would mean packets were routed via the falback virtual server. I initially thought this worked as a solution, but if FreeRadius is doing status checks against the remote servers then it will automatically bring them back into service as long as the status check requests are responding, which if say the remote partner is responding with access-rejects to even valid users is not what you want. I also considered using ip tables to drop the packets, which would trigger the use of the fallback virtual server, but if you'd decided to go into this state of accepting everything because of some intermittent network problem then dropping all packets with ip tables would make debugging that problem using radclient/radtest very difficult. One idea I haven't explored is having two copies of each virtual server, in different files, one for the normal situation and one for the failure situation and switching which one to use using symlinks and radmin to reload the configuration. So far what I have come up with so far is within a virtual server pre-proxy section to use the exec module to call a simple shell script that check for the presence of flag files indicating which if any partners are in a bad state. The support team are responsible for creating these files. If any flag files are present the the script adds a radius attribute for each, the value indicating which partner. In the pre-proxy section I can then check for this attribute and value if it indicates that the partner the virtual server is handling is in a failure state then call accept from the always module which will cancel the proxying attempt and send an access-accept. We can also call any policy that would also get called in the fallback virtual server or Post-Proxy-Type Fail-Authentication if we want common radius attributes to be returned in the response to apply some sort of QoS restriction. The rlm_exec documentation states using exec is very slow and something like the perl module would be more appropriate for a live environment. Before I carry on down the path of performance testing this and trying perl/python/rest/custom C module does anyone have any thoughts/observations or alternative suggestions? Thanks, Paul

4 10

How to define the Postgres schema name in mods-available sql ?
by Alen 27 May '21

27 May '21

In our postgres db we have a master_db and two underlying schemas, main and radius. How do I define the schema in /etc/freeradius/3.0/mods-available/sql ? server = "xxx" port = 5432 login = "" password = "" radius_db = "master_db" It seems I can only specify the database but not the underlying schema. Thanks,

2 3

postgresql queries.conf has an unterminated string
by Alen 27 May '21

27 May '21

Freeradius 3.0.21 seems to have a typo in /etc/freeradius/3.0/mods-config/sql/main/postgresql/queries.conf Line 505. AcctSessionTime = COALESCE(%{%{Acct-Session-Time}:-NULL}, (${....event_timestamp_epoch} - EXTRACT(EPOCH FROM(AcctStartTime)))), \ The error output: sudo freeradius -X FreeRADIUS Version 3.0.21 Copyright (C) 1999-2019 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/3.0/dictionary including configuration file /etc/freeradius/3.0/radiusd.conf including configuration file /etc/freeradius/3.0/proxy.conf including configuration file /etc/freeradius/3.0/clients.conf including files in directory /etc/freeradius/3.0/mods-enabled/ including configuration file /etc/freeradius/3.0/mods-enabled/passwd including configuration file /etc/freeradius/3.0/mods-enabled/logintime including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients including configuration file /etc/freeradius/3.0/mods-enabled/soh including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap including configuration file /etc/freeradius/3.0/mods-enabled/expr including configuration file /etc/freeradius/3.0/mods-enabled/eap including configuration file /etc/freeradius/3.0/mods-enabled/echo including configuration file /etc/freeradius/3.0/mods-enabled/sql including configuration file /etc/freeradius/3.0/mods-config/sql/main/postgresql/queries.conf /etc/freeradius/3.0/mods-config/sql/main/postgresql/queries.conf[505]: Parse error: Unterminated string Errors reading or parsing /etc/freeradius/3.0/radiusd.conf

3 4

Configuration issue at radiusd.conf?
by Honglak Kim 26 May '21

26 May '21

Hello all, I am very new to FreeRadius and I am not sure why I can't access the network device.It seems something to do with radiusd.conf but I can't identify it.. Please help. This is the debugging message when I ran the test. (0) Received Access-Request Id 116 from 10.0.254.3:43509 to 10.192.2.141:1812 length 92 (0) User-Name = "hong" (0) User-Password = "test123!" (0) NAS-Port-Id = "ssh" (0) Calling-Station-Id = "ops001.mydomain.com" (0) Service-Type = NAS-Prompt-User (0) NAS-Port = 0 (0) NAS-IP-Address = 10.0.254.3 (0) # Executing section authorize from file /etc/raddb/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "hong", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: No EAP-Message, not doing EAP (0) [eap] = noop (0) files: users: Matched entry hong at line 94 (0) [files] = ok (0) [expiration] = noop (0) [logintime] = noop (0) pap: Normalizing SHA-Password from hex encoding, 40 bytes -> 20 bytes (0) [pap] = updated (0) } # authorize = updated (0) Found Auth-Type = PAP (0) # Executing group from file /etc/raddb/sites-enabled/default (0) Auth-Type PAP { (0) pap: Login attempt with password (0) pap: Comparing with "known-good" SHA-Password (0) pap: User authenticated successfully (0) [pap] = ok (0) } # Auth-Type PAP = ok (0) # Executing section post-auth from file /etc/raddb/sites-enabled/default (0) post-auth { (0) update reply { (0) Juniper-Local-User-Name = "admin" (0) Arista-AVPair = "shell:priv-lvl=15" (0) Arista-AVPair = "shell:roles=network-admin" (0) PaloAlto-Admin-Role = "superuser" (0) PaloAlto-Panorama-Admin-Role = "superuser" (0) PaloAlto-User-Group = "all" (0) } # update reply = noop (0) [exec] = noop (0) policy remove_reply_message_if_eap { (0) if (&reply:EAP-Message && &reply:Reply-Message) { (0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (0) else { (0) [noop] = noop (0) } # else = noop (0) } # policy remove_reply_message_if_eap = noop (0) } # post-auth = noop (0) Sent Access-Accept Id 116 from 10.192.2.141:1812 to 10.0.254.3:43509 length 0 (0) Juniper-Local-User-Name = "admin" (0) Arista-AVPair = "shell:priv-lvl=15" (0) Arista-AVPair = "shell:roles=network-admin" (0) PaloAlto-Admin-Role = "superuser" (0) PaloAlto-Panorama-Admin-Role = "superuser" (0) PaloAlto-User-Group = "all" (0) Finished request Waking up in 4.9 seconds. Waking up in 6.9 seconds. (0) Cleaning up request packet ID 116 with timestamp +9 Thanks,Paul

4 6

Segmentation fault on 3.0.22 and head when doing a request status_check
by paul.moser＠bt.com 26 May '21

26 May '21

I've tried doing an upgrade to 3.0.22 (built locally from source), all our tests pass but one with FreeRadius suffering a segmentation fault. It appears to be when FreeRadius attempts a status_check after getting no response from a server when it's attempting to proxy a request, specifically a request status check, a status-server check does not cause an issue and neither does no status check. (fulradiusd -X output at end of email) (0) Proxying request to home server 127.0.0.1 port 5555 timeout 2.000000 (0) Sent Access-Request Id 127 from 0.0.0.0:57856 to 127.0.0.1:5555 length 59 (0) User-Name = "paul" (0) Event-Timestamp = "May 26 2021 17:30:02 UTC" (0) NAS-IP-Address = 127.0.0.1 (0) Message-Authenticator := 0x00 (0) Proxy-State = 0x34 Waking up in 0.3 seconds. (0) Expecting proxy response no later than 1.666647 seconds from now Waking up in 1.6 seconds. (0) No proxy response, giving up on request and marking it done Marking home server 127.0.0.1 port 5555 as zombie (it has not responded in 2.000000 seconds). PING: Waiting 4 seconds for response to ping (1) Sent Access-Request Id 141 from 0.0.0.0:57856 to 127.0.0.1:5555 length 0 (1) User-Name := "test_user_please_reject_me" Segmentation fault (core dumped) The minimal configuration I've used to replicate the issue on top of the out of the box configuration, just adding to proxy.conf: home_server home_server_bt { type = auth ipaddr = 127.0.0.1 port = 5555 secret = secret response_window = 2 status_check = request username = "test_user_please_reject_me" password = "this is really secret" check_interval = 30 num_answers_to_alive = 3 } home_server_pool auth_pool_bt { home_server = home_server_bt virtual_server = virtual_server_bt } realm bt.com { auth_pool = auth_pool_bt } And an empty virtual server in sites-enabled: server virtual_server_bt { } I've tried to rule out anything environmental by trying this on builds on Ubuntu and Oracle Linux. I've also tried a build from head of the v3.0.x branch. Paul FreeRADIUS Version 3.0.22 Copyright (C) 1999-2021 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Getting debug state failed: ptrace capability not set. If debugger detection is required run as root or: setcap cap_sys_ptrace+ep <path_to_radiusd> Starting - reading configuration files ... including dictionary file /opt/freeradius-server-3.0.22/share/freeradius/dictionary including dictionary file /opt/freeradius-server-3.0.22/share/freeradius/dictionary.dhcp including dictionary file /opt/freeradius-server-3.0.22/share/freeradius/dictionary.vqp including dictionary file /opt/freeradius-server-3.0.22/etc/raddb/dictionary including configuration file /opt/freeradius-server-3.0.22/etc/raddb/radiusd.conf including configuration file /opt/freeradius-server-3.0.22/etc/raddb/proxy.conf including configuration file /opt/freeradius-server-3.0.22/etc/raddb/clients.conf including files in directory /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/ including configuration file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/echo including configuration file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/realm including configuration file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/chap including configuration file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/attr_filter including configuration file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/detail including configuration file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/pap including configuration file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/date including configuration file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/preprocess including configuration file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/unix including configuration file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/expr including configuration file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/detail.log including configuration file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/dynamic_clients including configuration file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/sradutmp including configuration file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/soh including configuration file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/always including configuration file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/utf8 including configuration file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/linelog including configuration file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/passwd including configuration file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/ntlm_auth including configuration file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/radutmp including configuration file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/digest including configuration file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/replicate including configuration file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/cache_eap including configuration file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/files including configuration file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/unpack including configuration file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/mschap including configuration file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/expiration including configuration file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/logintime including configuration file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/exec including configuration file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/eap including files in directory /opt/freeradius-server-3.0.22/etc/raddb/policy.d/ including configuration file /opt/freeradius-server-3.0.22/etc/raddb/policy.d/canonicalization including configuration file /opt/freeradius-server-3.0.22/etc/raddb/policy.d/accounting including configuration file /opt/freeradius-server-3.0.22/etc/raddb/policy.d/control including configuration file /opt/freeradius-server-3.0.22/etc/raddb/policy.d/filter including configuration file /opt/freeradius-server-3.0.22/etc/raddb/policy.d/rfc7542 including configuration file /opt/freeradius-server-3.0.22/etc/raddb/policy.d/operator-name including configuration file /opt/freeradius-server-3.0.22/etc/raddb/policy.d/abfab-tr including configuration file /opt/freeradius-server-3.0.22/etc/raddb/policy.d/cui including configuration file /opt/freeradius-server-3.0.22/etc/raddb/policy.d/debug including configuration file /opt/freeradius-server-3.0.22/etc/raddb/policy.d/moonshot-targeted-ids including configuration file /opt/freeradius-server-3.0.22/etc/raddb/policy.d/eap including configuration file /opt/freeradius-server-3.0.22/etc/raddb/policy.d/dhcp including files in directory /opt/freeradius-server-3.0.22/etc/raddb/sites-enabled/ including configuration file /opt/freeradius-server-3.0.22/etc/raddb/sites-enabled/default including configuration file /opt/freeradius-server-3.0.22/etc/raddb/sites-enabled/virtual_server_bt including configuration file /opt/freeradius-server-3.0.22/etc/raddb/sites-enabled/inner-tunnel main { security { allow_core_dumps = no } name = "radiusd" prefix = "/opt/freeradius-server-3.0.22" localstatedir = "/opt/freeradius-server-3.0.22/var" logdir = "/opt/freeradius-server-3.0.22/var/log/radius" run_dir = "/opt/freeradius-server-3.0.22/var/run/radiusd" } main { name = "radiusd" prefix = "/opt/freeradius-server-3.0.22" localstatedir = "/opt/freeradius-server-3.0.22/var" sbindir = "/opt/freeradius-server-3.0.22/sbin" logdir = "/opt/freeradius-server-3.0.22/var/log/radius" run_dir = "/opt/freeradius-server-3.0.22/var/run/radiusd" libdir = "/opt/freeradius-server-3.0.22/lib" radacctdir = "/opt/freeradius-server-3.0.22/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/opt/freeradius-server-3.0.22/var/run/radiusd/radiusd.pid" checkrad = "/opt/freeradius-server-3.0.22/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes allow_vulnerable_openssl = "no" } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server home_server_bt { ipaddr = 127.0.0.1 port = 5555 type = "auth" secret = <<< secret >>> response_window = 2.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "request" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 300 username = "test_user_please_reject_me" password = "this is really secret" limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } home_server_pool auth_pool_bt { virtual_server = virtual_server_bt home_server = home_server_bt } realm bt.com { auth_pool = auth_pool_bt } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debug state unknown (cap_sys_ptrace capability not set) # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Autz-Type = New-TLS-Connection radiusd: #### Instantiating modules #### modules { # Loaded module rlm_exec # Loading module "echo" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_realm # Loading module "IPASS" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "bangpath" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/realm realm bangpath { format = "prefix" delimiter = "!" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_chap # Loading module "chap" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/chap # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/opt/freeradius-server-3.0.22/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/opt/freeradius-server-3.0.22/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/opt/freeradius-server-3.0.22/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/opt/freeradius-server-3.0.22/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/opt/freeradius-server-3.0.22/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.coa" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.coa { filename = "/opt/freeradius-server-3.0.22/etc/raddb/mods-config/attr_filter/coa" key = "%{User-Name}" relaxed = no } # Loaded module rlm_detail # Loading module "detail" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/detail detail { filename = "/opt/freeradius-server-3.0.22/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_pap # Loading module "pap" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_date # Loading module "date" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" utc = no } # Loading module "wispr2date" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/date date wispr2date { format = "%Y-%m-%dT%H:%M:%S" utc = no } # Loaded module rlm_preprocess # Loading module "preprocess" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/opt/freeradius-server-3.0.22/etc/raddb/mods-config/preprocess/huntgroups" hints = "/opt/freeradius-server-3.0.22/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_unix # Loading module "unix" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/unix unix { radwtmp = "/opt/freeradius-server-3.0.22/var/log/radius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_expr # Loading module "expr" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loading module "auth_log" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/opt/freeradius-server-3.0.22/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/opt/freeradius-server-3.0.22/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/opt/freeradius-server-3.0.22/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/opt/freeradius-server-3.0.22/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_radutmp # Loading module "sradutmp" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/opt/freeradius-server-3.0.22/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_soh # Loading module "soh" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_always # Loading module "reject" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_utf8 # Loading module "utf8" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/utf8 # Loaded module rlm_linelog # Loading module "linelog" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/linelog linelog { filename = "/opt/freeradius-server-3.0.22/var/log/radius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/opt/freeradius-server-3.0.22/var/log/radius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loading module "ntlm_auth" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loading module "radutmp" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/radutmp radutmp { filename = "/opt/freeradius-server-3.0.22/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_digest # Loading module "digest" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/digest # Loaded module rlm_replicate # Loading module "replicate" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/replicate # Loaded module rlm_cache # Loading module "cache_eap" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_files # Loading module "files" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/files files { filename = "/opt/freeradius-server-3.0.22/etc/raddb/mods-config/files/authorize" acctusersfile = "/opt/freeradius-server-3.0.22/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/opt/freeradius-server-3.0.22/etc/raddb/mods-config/files/pre-proxy" } # Loaded module rlm_unpack # Loading module "unpack" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/unpack # Loaded module rlm_mschap # Loading module "mschap" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_expiration # Loading module "expiration" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/expiration # Loaded module rlm_logintime # Loading module "logintime" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loading module "exec" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_eap # Loading module "eap" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } instantiate { } # Instantiating module "IPASS" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/realm # Instantiating module "suffix" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/realm # Instantiating module "bangpath" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/realm # Instantiating module "realmpercent" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/realm # Instantiating module "ntdomain" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/realm # Instantiating module "attr_filter.post-proxy" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/attr_filter reading pairlist file /opt/freeradius-server-3.0.22/etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/attr_filter reading pairlist file /opt/freeradius-server-3.0.22/etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/attr_filter reading pairlist file /opt/freeradius-server-3.0.22/etc/raddb/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/attr_filter reading pairlist file /opt/freeradius-server-3.0.22/etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/attr_filter reading pairlist file /opt/freeradius-server-3.0.22/etc/raddb/mods-config/attr_filter/accounting_response # Instantiating module "attr_filter.coa" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/attr_filter reading pairlist file /opt/freeradius-server-3.0.22/etc/raddb/mods-config/attr_filter/coa # Instantiating module "detail" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/detail # Instantiating module "pap" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/pap # Instantiating module "preprocess" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/preprocess reading pairlist file /opt/freeradius-server-3.0.22/etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /opt/freeradius-server-3.0.22/etc/raddb/mods-config/preprocess/hints # Instantiating module "auth_log" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/detail.log # Instantiating module "reject" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/always # Instantiating module "fail" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/always # Instantiating module "ok" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/always # Instantiating module "handled" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/always # Instantiating module "invalid" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/always # Instantiating module "userlock" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/always # Instantiating module "notfound" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/always # Instantiating module "noop" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/always # Instantiating module "updated" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/always # Instantiating module "linelog" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/linelog # Instantiating module "log_accounting" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/linelog # Instantiating module "etc_passwd" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "cache_eap" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "files" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/files reading pairlist file /opt/freeradius-server-3.0.22/etc/raddb/mods-config/files/authorize reading pairlist file /opt/freeradius-server-3.0.22/etc/raddb/mods-config/files/accounting reading pairlist file /opt/freeradius-server-3.0.22/etc/raddb/mods-config/files/pre-proxy # Instantiating module "mschap" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "expiration" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/expiration # Instantiating module "logintime" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/logintime # Instantiating module "eap" from file /opt/freeradius-server-3.0.22/etc/raddb/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/opt/freeradius-server-3.0.22/etc/raddb/certs" pem_file_type = yes private_key_file = "/opt/freeradius-server-3.0.22/etc/raddb/certs/server.pem" certificate_file = "/opt/freeradius-server-3.0.22/etc/raddb/certs/server.pem" ca_file = "/opt/freeradius-server-3.0.22/etc/raddb/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/opt/freeradius-server-3.0.22/etc/raddb/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no ca_path_reload_interval = 0 cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" tls_max_version = "1.2" tls_min_version = "1.2" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } } # modules radiusd: #### Loading Virtual Servers #### server { # from file /opt/freeradius-server-3.0.22/etc/raddb/radiusd.conf } # server server default { # from file /opt/freeradius-server-3.0.22/etc/raddb/sites-enabled/default # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type CHAP for attr Auth-Type Compiling Auth-Type MS-CHAP for attr Auth-Type # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) Ignoring "ldap" (see raddb/mods-available/README.rst) Compiling Autz-Type New-TLS-Connection for attr Autz-Type # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} Compiling Post-Auth-Type REJECT for attr Post-Auth-Type Compiling Post-Auth-Type Challenge for attr Post-Auth-Type } # server default server virtual_server_bt { # from file /opt/freeradius-server-3.0.22/etc/raddb/sites-enabled/virtual_server_bt } # server virtual_server_bt server inner-tunnel { # from file /opt/freeradius-server-3.0.22/etc/raddb/sites-enabled/inner-tunnel # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type CHAP for attr Auth-Type Compiling Auth-Type MS-CHAP for attr Auth-Type # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /opt/freeradius-server-3.0.22/etc/raddb/sites-enabled/inner-tunnel:336 Compiling Post-Auth-Type REJECT for attr Post-Auth-Type } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Ignoring duplicate client 127.0.0.1 client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Ignoring duplicate client ::1 } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on proxy address * port 57856 Listening on proxy address :: port 54137 Ready to process requests (0) Received Access-Request Id 4 from 127.0.0.1:50956 to 127.0.0.1:1812 length 33 (0) User-Name = "paul(a)bt.com" (0) # Executing section authorize from file /opt/freeradius-server-3.0.22/etc/raddb/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: Looking up realm "bt.com" for User-Name = "paul(a)bt.com" (0) suffix: Found realm "bt.com" (0) suffix: Adding Stripped-User-Name = "paul" (0) suffix: Adding Realm = "bt.com" (0) suffix: Proxying request from user paul to realm bt.com (0) suffix: Preparing to proxy authentication request to realm "bt.com" (0) [suffix] = updated (0) eap: No EAP-Message, not doing EAP (0) [eap] = noop (0) [files] = noop (0) [expiration] = noop (0) [logintime] = noop (0) [pap] = noop (0) } # authorize = updated (0) Starting proxy to home server 127.0.0.1 port 5555 (0) server virtual_server_bt { (0) } (0) Proxying request to home server 127.0.0.1 port 5555 timeout 2.000000 (0) Sent Access-Request Id 127 from 0.0.0.0:57856 to 127.0.0.1:5555 length 59 (0) User-Name = "paul" (0) Event-Timestamp = "May 26 2021 17:30:02 UTC" (0) NAS-IP-Address = 127.0.0.1 (0) Message-Authenticator := 0x00 (0) Proxy-State = 0x34 Waking up in 0.3 seconds. (0) Expecting proxy response no later than 1.666647 seconds from now Waking up in 1.6 seconds. (0) No proxy response, giving up on request and marking it done Marking home server 127.0.0.1 port 5555 as zombie (it has not responded in 2.000000 seconds). PING: Waiting 4 seconds for response to ping (1) Sent Access-Request Id 141 from 0.0.0.0:57856 to 127.0.0.1:5555 length 0 (1) User-Name := "test_user_please_reject_me" Segmentation fault (core dumped)

2 1

Building against MariaDB 10.5
by Sebastian Hagedorn 26 May '21

26 May '21

Hi, I apologise if this question is considered off-topic, but I wouldn’t know where else to ask. We run freeradius on RHEL 7, using our own RPMs that are based on the SPEC file included with freeradius, but with some differences. Our database team doesn’t want to use the stock mariadb RPM, so we use version 10.5 from http://yum.mariadb.org/10.5/rhel7-amd64. The issue is that I have found that when I build the freeradius 3.0.22 RPM with MariaDB 10.5 installed, the freeradius server doesn’t run properly. I configured a panic_action and can provide the gdb files if there is interest. If I use mariadb-devel 5.5 (standard issue RHEL 7) to build, everything works fine, even when the database server is running MariaDB 10.5. So there is a workaround, but I wonder if it shouldn’t be possible to compile with the newer version installed? -- .:.Sebastian Hagedorn - Weyertal 121 (Gebäude 133), Zimmer 2.02.:. .:.Regionales Rechenzentrum (RRZK).:. .:.Universität zu Köln / Cologne University - ✆ +49-221-470-89578.:.

2 3

Radsec Limitations
by Michael Cullen 26 May '21

26 May '21

Good afternoon, We have radsec tunnels between the authenticator and the server wherever it is supported, and a lot of the newer networking equipment that has this. The majority of traffic will be on Windows machines using EAP-TTLS. We came across this message: https://www.juniper.net/documentation/us/en/software/junos/user-access/topi… which states "NOTE: Due to limitations of the TCP protocol, RADSEC can have no more than 255 RADIUS messages in flight." Due to the majority of our traffic being from Windows machines using EAP-TTLS, will this also include RADIUS messages? Has anyone been affected by this limitation? We are looking at scaling the RADIUS solution to a large number of users in the future. There seems to be no reported issues about these limitations, other than the article above. Thanks for any help you can provide, Michael

2 1

Question about the new sql client behaivour in 3.0.22
by bpbp＠fastmail.com 26 May '21

26 May '21

Hi list, I just upgraded to 3.0.22 and I have a question about an issue I just ran into. I see in the changelog there's some changes to how clients are loaded. Previously I was using the nas table via MySQL to load clients into the global list for all my virtual servers. With 3.0.22 I can see the clients successfully loaded but freeradius is then ignoring any accounting requests from those clients with: radiusd[32025]: Ignoring request to acct address * port 1821 bound to server combined from unknown client 192.168.10.215 port 37819 proto udp I resolved the issue by putting the clients into clients.conf with the following basic config for now client radius01.syd1 { ipaddr = 192.168.10.215 secret = [..] } and for reference the previously working SQL configuration for that client mysql> SELECT * FROM radius.nas WHERE nasname = '192.168.10.215'; +----+----------------+---------------+-------+-------+----------+--------+-----------+-------------+ | id | nasname | shortname | type | ports | secret | server | community | description | +----+----------------+---------------+-------+-------+----------+--------+-----------+-------------+ | 85 | 192.168.10.215 | radius01.syd1 | other | NULL | [..]| NULL | NULL | | +----+----------------+---------------+-------+-------+----------+--------+-----------+-------------+ 1 row in set (0.00 sec) radmin shows the following slight differences after loading both radmin> show client list verbose client radius01.syd1 { ipaddr = 192.168.10.215/32 proto = udp secret = [..] longname = 192.168.10.215 shortname = radius01.syd1 number = 0 global = yes } client { ipaddr = 192.168.10.215/32 proto = * secret = [...] longname = 192.168.10.215 shortname = radius01.syd1 nas_type = other number = 47 dynamic = yes lifetime = 0 global = yes } My question is what am I doing wrong here that the client loaded from sql isn't working? I thought it might be the changes around client loading but radmin shows that it was successfully loaded as a global client and not tied to a single virtualhost. Thanks, Boden radiusd -X output FreeRADIUS Version 3.0.22 Copyright (C) 1999-2021 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/raddb/dictionary including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/mods-enabled/ including configuration file /etc/raddb/mods-enabled/always including configuration file /etc/raddb/mods-enabled/attr_filter including configuration file /etc/raddb/mods-enabled/cache_eap including configuration file /etc/raddb/mods-enabled/chap including configuration file /etc/raddb/mods-enabled/detail including configuration file /etc/raddb/mods-enabled/detail.log including configuration file /etc/raddb/mods-enabled/digest including configuration file /etc/raddb/mods-enabled/dynamic_clients including configuration file /etc/raddb/mods-enabled/echo including configuration file /etc/raddb/mods-enabled/exec including configuration file /etc/raddb/mods-enabled/expiration including configuration file /etc/raddb/mods-enabled/expr including configuration file /etc/raddb/mods-enabled/files including configuration file /etc/raddb/mods-enabled/linelog including configuration file /etc/raddb/mods-enabled/logintime including configuration file /etc/raddb/mods-enabled/mschap including configuration file /etc/raddb/mods-enabled/ntlm_auth including configuration file /etc/raddb/mods-enabled/pap including configuration file /etc/raddb/mods-enabled/passwd including configuration file /etc/raddb/mods-enabled/preprocess including configuration file /etc/raddb/mods-enabled/radutmp including configuration file /etc/raddb/mods-enabled/realm including configuration file /etc/raddb/mods-enabled/replicate including configuration file /etc/raddb/mods-enabled/soh including configuration file /etc/raddb/mods-enabled/sradutmp including configuration file /etc/raddb/mods-enabled/unix including configuration file /etc/raddb/mods-enabled/unpack including configuration file /etc/raddb/mods-enabled/utf8 including configuration file /etc/raddb/mods-enabled/sql including configuration file /etc/raddb/mods-config/sql/main/mysql/queries.conf including configuration file /etc/raddb/mods-enabled/sqlippool including configuration file /etc/raddb/mods-config/sql/ippool/mysql/queries.conf including configuration file /etc/raddb/mods-enabled/date including configuration file /etc/raddb/mods-enabled/detail.my-company.net.au including files in directory /etc/raddb/policy.d/ including configuration file /etc/raddb/policy.d/accounting including configuration file /etc/raddb/policy.d/canonicalization including configuration file /etc/raddb/policy.d/control including configuration file /etc/raddb/policy.d/cui including configuration file /etc/raddb/policy.d/debug including configuration file /etc/raddb/policy.d/dhcp including configuration file /etc/raddb/policy.d/eap including configuration file /etc/raddb/policy.d/filter including configuration file /etc/raddb/policy.d/operator-name including configuration file /etc/raddb/policy.d/abfab-tr including configuration file /etc/raddb/policy.d/moonshot-targeted-ids including configuration file /etc/raddb/policy.d/rfc7542 including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/combined-walled-garden including configuration file /etc/raddb/sites-enabled/combined-walled-garden-nbn including configuration file /etc/raddb/sites-enabled/control-socket including configuration file /etc/raddb/sites-enabled/coa including configuration file /etc/raddb/sites-enabled/decoupled-accounting-my-company including configuration file /etc/raddb/sites-enabled/status main { security { user = "radiusd" group = "radiusd" allow_core_dumps = no } name = "radiusd" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" } main { name = "radiusd" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" libdir = "/usr/lib64/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 4096 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = yes auth_badpass = yes auth_goodpass = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes allow_vulnerable_openssl = "no" } } radiusd: #### Loading Realms and Home Servers #### realm DEFAULT { } radiusd: #### Loading Clients #### client radius01.syd1 { ipaddr = 192.168.10.215 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client radius02.syd1 { ipaddr = 192.168.10.222 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached systemd watchdog is disabled # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Autz-Type = Status-Server radiusd: #### Instantiating modules #### modules { # Loaded module rlm_always # Loading module "reject" from file /etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_chap # Loading module "chap" from file /etc/raddb/mods-enabled/chap # Loaded module rlm_detail # Loading module "detail" from file /etc/raddb/mods-enabled/detail detail { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "auth_log" from file /etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_digest # Loading module "digest" from file /etc/raddb/mods-enabled/digest # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_exec # Loading module "echo" from file /etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loading module "exec" from file /etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/raddb/mods-enabled/expiration # Loaded module rlm_expr # Loading module "expr" from file /etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_files # Loading module "files" from file /etc/raddb/mods-enabled/files files { filename = "/etc/raddb/mods-config/files/visp_users" acctusersfile = "/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy" } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/raddb/mods-enabled/linelog linelog { filename = "/var/log/radius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/var/log/radius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loading module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_pap # Loading module "pap" from file /etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups" hints = "/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = yes with_alvarion_vsa_hack = no } # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "bangpath" from file /etc/raddb/mods-enabled/realm realm bangpath { format = "prefix" delimiter = "!" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\" ignore_default = no ignore_null = no } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/raddb/mods-enabled/replicate # Loaded module rlm_soh # Loading module "soh" from file /etc/raddb/mods-enabled/soh soh { dhcp = yes } # Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_unix # Loading module "unix" from file /etc/raddb/mods-enabled/unix unix { radwtmp = "/var/log/radius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_unpack # Loading module "unpack" from file /etc/raddb/mods-enabled/unpack # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/raddb/mods-enabled/utf8 # Loaded module rlm_sql # Loading module "sql" from file /etc/raddb/mods-enabled/sql sql { driver = "rlm_sql_mysql" server = "192.168.10.206" port = 3306 login = "radius" password = <<< secret >>> radius_db = "radius" read_groups = yes read_profiles = yes read_clients = yes delete_stale_sessions = yes sql_user_name = "%{User-Name}" default_user_profile = "" client_query = "SELECT id, nasname, shortname, type, secret, server FROM nas" authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id" authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id" group_membership_query = "SELECT groupname FROM usergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority" simul_count_query = "SELECT COUNT(*) FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" auto_escape = no accounting { reference = "%{tolower:type.%{%{Acct-Status-Type}:-%{Request-Processing-Stage}}.query}" type { accounting-on { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), acctsessiontime = '%{%{integer:Event-Timestamp}:-%l}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l})" } accounting-off { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), acctsessiontime = '%{%{integer:Event-Timestamp}:-%l}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l})" } start { query = "INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, framedipv6address, framedipv6prefix, framedipv6pool, delegatedipv6prefix) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}', FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{Framed-IPv6-Address}', '%{Framed-IPv6-Prefix}', '%{Framed-IPv6-Pool}', '%{Delegated-IPv6-Prefix}')" } interim-update { query = "UPDATE radacct SET acctupdatetime = (@acctupdatetime_old:=acctupdatetime), acctupdatetime = FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), acctinterval = %{%{integer:Event-Timestamp}:-%l} - UNIX_TIMESTAMP(@acctupdatetime_old), framedipaddress = '%{Framed-IP-Address}', framedipv6address = '%{Framed-IPv6-Address}', framedipv6prefix = '%{Framed-IPv6-Prefix}', framedipv6pool = '%{Framed-IPv6-Pool}', delegatedipv6prefix = '%{Delegated-IPv6-Prefix}', acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'" } stop { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'" } } } post-auth { reference = ".query" query = "INSERT INTO radpostauth (username, pass, reply, authdate, downstream, upstream) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S.%M', '%{request:Actual-Data-Rate-Downstream}', '%{request:Actual-Data-Rate-Upstream}' )" } } rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked Creating attribute SQL-Group # Loaded module rlm_sqlippool # Loading module "sqlippool" from file /etc/raddb/mods-enabled/sqlippool sqlippool { sql_module_instance = "sql" lease_duration = 3600 pool_name = "Pool-Name" default_pool = "main_pool" attribute_name = "Framed-IP-Address" allocate_begin = "START TRANSACTION" allocate_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE expiry_time <= NOW() - INTERVAL 1 SECOND AND nasipaddress = '%{%{Nas-IP-Address}:-%{Nas-IPv6-Address}}'" allocate_clear_timeout = 1 allocate_existing = "" allocate_requested = "" allocate_find = "SELECT framedipaddress FROM radippool WHERE pool_name = '%{control:Pool-Name}' AND ( expiry_time < NOW() OR expiry_time IS NULL OR expiry_time = 0 OR ( nasipaddress = '%{NAS-IP-Address}' AND pool_key = '%{NAS-Port-Id}' ) ) ORDER BY (username <> '%{User-Name}'), (callingstationid <> '%{Calling-Station-Id}'), expiry_time LIMIT 1 FOR UPDATE" allocate_update = "UPDATE radippool SET nasipaddress = '%{NAS-IP-Address}', pool_key = '%{NAS-Port-Id}', callingstationid = '%{Calling-Station-Id}', username = '%{User-Name}', expiry_time = NOW() + INTERVAL 3600 SECOND WHERE framedipaddress = '%I'" allocate_commit = "COMMIT" pool_check = "SELECT id FROM radippool WHERE pool_name='%{control:Pool-Name}' LIMIT 1" start_begin = "" start_update = "UPDATE radippool SET expiry_time = NOW() + INTERVAL 3600 SECOND WHERE nasipaddress = '%{NAS-IP-Address}' AND pool_key = '%{NAS-Port-Id}' AND username = '%{User-Name}' AND callingstationid = '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'" start_commit = "" alive_begin = "" alive_update = "UPDATE radippool SET expiry_time = NOW() + INTERVAL 3600 SECOND WHERE nasipaddress = '%{%{Nas-IP-Address}:-%{Nas-IPv6-Address}}' AND pool_key = '%{NAS-Port-Id}' AND username = '%{User-Name}' AND callingstationid = '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'" alive_commit = "" stop_begin = "" stop_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE nasipaddress = '%{%{Nas-IP-Address}:-%{Nas-IPv6-Address}}' AND pool_key = '%{NAS-Port-Id}' AND username = '%{User-Name}' AND callingstationid = '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'" stop_commit = "" on_begin = "" on_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE nasipaddress = '%{%{Nas-IP-Address}:-%{Nas-IPv6-Address}}'" on_commit = "" off_begin = "" off_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE nasipaddress = '%{%{Nas-IP-Address}:-%{Nas-IPv6-Address}}'" off_commit = "" messages { exists = "Existing IP: %{reply:Framed-IP-Address} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})" success = "Allocated IP: %{reply:Framed-IP-Address} from %{control:Pool-Name} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})" clear = "Released IP Framed-IP-Address (did %{Called-Station-Id} cli %{Calling-Station-Id} user %{User-Name})" failed = "IP Allocation FAILED from %{control:Pool-Name} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})" nopool = "No Pool-Name defined (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})" } } # Loaded module rlm_date # Loading module "date" from file /etc/raddb/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" utc = no } # Loading module "wispr2date" from file /etc/raddb/mods-enabled/date date wispr2date { format = "%Y-%m-%dT%H:%M:%S" utc = no } # Loading module "detail.my-company.net.au" from file /etc/raddb/mods-enabled/detail.my-company.net.au detail detail.my-company.net.au { filename = "/var/log/radius/radacct/detail-%Y%m%d:%H:%G" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } instantiate { } # Instantiating module "reject" from file /etc/raddb/mods-enabled/always # Instantiating module "fail" from file /etc/raddb/mods-enabled/always # Instantiating module "ok" from file /etc/raddb/mods-enabled/always # Instantiating module "handled" from file /etc/raddb/mods-enabled/always # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always # Instantiating module "noop" from file /etc/raddb/mods-enabled/always # Instantiating module "updated" from file /etc/raddb/mods-enabled/always # Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response # Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "expiration" from file /etc/raddb/mods-enabled/expiration # Instantiating module "files" from file /etc/raddb/mods-enabled/files reading pairlist file /etc/raddb/mods-config/files/visp_users reading pairlist file /etc/raddb/mods-config/files/accounting reading pairlist file /etc/raddb/mods-config/files/pre-proxy # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog # Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap # Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "preprocess" from file /etc/raddb/mods-enabled/preprocess reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /etc/raddb/mods-config/preprocess/hints # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm # Instantiating module "bangpath" from file /etc/raddb/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm # Instantiating module "sql" from file /etc/raddb/mods-enabled/sql rlm_sql_mysql: libmysql version: 5.6.45 mysql { tls { tls_required = no } warnings = "auto" } rlm_sql (sql): Attempting to connect to database "radius" rlm_sql (sql): Initialising connection pool pool { start = 10 min = 10 max = 40 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 600 retry_delay = 1 spread = no } rlm_sql (sql): Opening additional connection (0), 1 of 40 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on 192.168.10.206 via TCP/IP, server version 8.0.25, protocol version 10 rlm_sql (sql): Opening additional connection (1), 1 of 39 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on 192.168.10.206 via TCP/IP, server version 8.0.25, protocol version 10 rlm_sql (sql): Opening additional connection (2), 1 of 38 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on 192.168.10.206 via TCP/IP, server version 8.0.25, protocol version 10 rlm_sql (sql): Opening additional connection (3), 1 of 37 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on 192.168.10.206 via TCP/IP, server version 8.0.25, protocol version 10 rlm_sql (sql): Opening additional connection (4), 1 of 36 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on 192.168.10.206 via TCP/IP, server version 8.0.25, protocol version 10 rlm_sql (sql): Opening additional connection (5), 1 of 35 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on 192.168.10.206 via TCP/IP, server version 8.0.25, protocol version 10 rlm_sql (sql): Opening additional connection (6), 1 of 34 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on 192.168.10.206 via TCP/IP, server version 8.0.25, protocol version 10 rlm_sql (sql): Opening additional connection (7), 1 of 33 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on 192.168.10.206 via TCP/IP, server version 8.0.25, protocol version 10 rlm_sql (sql): Opening additional connection (8), 1 of 32 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on 192.168.10.206 via TCP/IP, server version 8.0.25, protocol version 10 rlm_sql (sql): Opening additional connection (9), 1 of 31 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on 192.168.10.206 via TCP/IP, server version 8.0.25, protocol version 10 rlm_sql (sql): Processing generate_sql_clients rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname, shortname, type, secret, server FROM nas rlm_sql (sql): Reserved connection (0) rlm_sql (sql): Executing select query: SELECT id, nasname, shortname, type, secret, server FROM nas rlm_sql (sql): Adding client 203.23.236.6 (VIC-LNS) to global clients list rlm_sql (203.23.236.6): Client "VIC-LNS" (sql) added rlm_sql (sql): Adding client 203.23.236.26 (ADSL-LNS) to global clients list rlm_sql (203.23.236.26): Client "ADSL-LNS" (sql) added rlm_sql (sql): Adding client 203.23.236.46 (ADSL-LNS) to global clients list rlm_sql (203.23.236.46): Client "ADSL-LNS" (sql) added rlm_sql (sql): Adding client 192.168.10.226 (Station) to global clients list rlm_sql (192.168.10.226): Client "Station" (sql) added rlm_sql (sql): Adding client 202.172.107.74 (Astro) to global clients list rlm_sql (202.172.107.74): Client "Astro" (sql) added rlm_sql (sql): Adding client 202.172.107.75 (VM2) to global clients list rlm_sql (202.172.107.75): Client "VM2" (sql) added rlm_sql (sql): Adding client 203.23.236.80 (Raven) to global clients list rlm_sql (203.23.236.80): Client "Raven" (sql) added rlm_sql (sql): Adding client 203.23.236.2 (3G-LNS) to global clients list rlm_sql (203.23.236.2): Client "3G-LNS" (sql) added rlm_sql (sql): Adding client 124.254.72.146 (ISPOne-radius-1) to global clients list rlm_sql (124.254.72.146): Client "ISPOne-radius-1" (sql) added rlm_sql (sql): Adding client 124.254.72.147 (ISPOne-radius-2) to global clients list rlm_sql (124.254.72.147): Client "ISPOne-radius-2" (sql) added rlm_sql (sql): Adding client 203.194.28.131 (SOUL1) to global clients list rlm_sql (203.194.28.131): Client "SOUL1" (sql) added rlm_sql (sql): Adding client 10.20.20.2 (ADSL-LNS) to global clients list rlm_sql (10.20.20.2): Client "ADSL-LNS" (sql) added rlm_sql (sql): Adding client 203.194.28.132 (SOUL2) to global clients list rlm_sql (203.194.28.132): Client "SOUL2" (sql) added rlm_sql (sql): Adding client 203.194.56.120 (SOUL3) to global clients list rlm_sql (203.194.56.120): Client "SOUL3" (sql) added rlm_sql (sql): Adding client 203.194.56.121 (SOUL4) to global clients list rlm_sql (203.194.56.121): Client "SOUL4" (sql) added rlm_sql (sql): Adding client 203.194.59.120 (SOUL5) to global clients list rlm_sql (203.194.59.120): Client "SOUL5" (sql) added rlm_sql (sql): Adding client 203.194.59.121 (SOUL6) to global clients list rlm_sql (203.194.59.121): Client "SOUL6" (sql) added rlm_sql (sql): Adding client 203.221.163.160 (SOUL7) to global clients list rlm_sql (203.221.163.160): Client "SOUL7" (sql) added rlm_sql (sql): Adding client 203.221.11.41 (SOUL8) to global clients list rlm_sql (203.221.11.41): Client "SOUL8" (sql) added rlm_sql (sql): Adding client 203.194.23.101 (SOUL9) to global clients list rlm_sql (203.194.23.101): Client "SOUL9" (sql) added rlm_sql (sql): Adding client 127.0.0.1 (localhost) to global clients list rlm_sql (127.0.0.1): Client "localhost" (sql) added rlm_sql (sql): Adding client 203.23.236.121 (new-titan) to global clients list rlm_sql (203.23.236.121): Client "new-titan" (sql) added rlm_sql (sql): Adding client 203.23.236.146 (ADSL-LNS) to global clients list rlm_sql (203.23.236.146): Client "ADSL-LNS" (sql) added rlm_sql (sql): Adding client 203.23.236.66 (Angel) to global clients list rlm_sql (203.23.236.66): Client "Angel" (sql) added rlm_sql (sql): Adding client 202.172.107.251 (ADSL-LNS) to global clients list rlm_sql (202.172.107.251): Client "ADSL-LNS" (sql) added rlm_sql (sql): Adding client 192.168.10.195 (Station Eris) to global clients list rlm_sql (192.168.10.195): Client "Station Eris" (sql) added rlm_sql (sql): Adding client 203.23.236.30 (NBN-LNS) to global clients list rlm_sql (203.23.236.30): Client "NBN-LNS" (sql) added rlm_sql (sql): Adding client 203.23.236.46 (ADSL-LNS) to global clients list Ignoring duplicate client 203.23.236.46 rlm_sql (203.23.236.46): Client "ADSL-LNS" (sql) added rlm_sql (sql): Adding client 203.23.236.58 (NBN-LNS) to global clients list rlm_sql (203.23.236.58): Client "NBN-LNS" (sql) added rlm_sql (sql): Adding client 203.23.236.154 (ADSL-LNS) to global clients list rlm_sql (203.23.236.154): Client "ADSL-LNS" (sql) added rlm_sql (sql): Adding client 192.168.10.202 (crimson) to global clients list rlm_sql (192.168.10.202): Client "crimson" (sql) added rlm_sql (sql): Adding client 203.23.236.54 (ADSL-LNS) to global clients list rlm_sql (203.23.236.54): Client "ADSL-LNS" (sql) added rlm_sql (sql): Adding client 192.168.10.205 (Station Galaxy) to global clients list rlm_sql (192.168.10.205): Client "Station Galaxy" (sql) added rlm_sql (sql): Adding client 203.23.236.50 (NBN-LNS) to global clients list rlm_sql (203.23.236.50): Client "NBN-LNS" (sql) added rlm_sql (sql): Adding client 10.10.100.2 (NBN-LNS-2) to global clients list rlm_sql (10.10.100.2): Client "NBN-LNS-2" (sql) added rlm_sql (sql): Adding client 10.10.200.2 (NBN-LNS-2) to global clients list rlm_sql (10.10.200.2): Client "NBN-LNS-2" (sql) added rlm_sql (sql): Adding client 10.10.100.5 (NBN-LNS-2) to global clients list rlm_sql (10.10.100.5): Client "NBN-LNS-2" (sql) added rlm_sql (sql): Adding client 10.10.200.5 (NBN-LNS-2) to global clients list rlm_sql (10.10.200.5): Client "NBN-LNS-2" (sql) added rlm_sql (sql): Adding client 203.29.125.11 (noc3) to global clients list rlm_sql (203.29.125.11): Client "noc3" (sql) added rlm_sql (sql): Adding client 203.23.236.11 (NBN-LNS-2) to global clients list rlm_sql (203.23.236.11): Client "NBN-LNS-2" (sql) added rlm_sql (sql): Adding client 203.23.237.13 (NBN-LNS-3) to global clients list rlm_sql (203.23.237.13): Client "NBN-LNS-3" (sql) added rlm_sql (sql): Adding client 192.168.10.208 (behemoth) to global clients list rlm_sql (192.168.10.208): Client "behemoth" (sql) added rlm_sql (sql): Adding client 203.23.237.12 (NBN-LNS-2) to global clients list rlm_sql (203.23.237.12): Client "NBN-LNS-2" (sql) added rlm_sql (sql): Adding client 202.172.100.9 (NBN-LNS) to global clients list rlm_sql (202.172.100.9): Client "NBN-LNS" (sql) added rlm_sql (sql): Adding client 202.172.100.35 (NBN-LNS) to global clients list rlm_sql (202.172.100.35): Client "NBN-LNS" (sql) added rlm_sql (sql): Adding client 203.23.237.11 (NBN-LNS) to global clients list rlm_sql (203.23.237.11): Client "NBN-LNS" (sql) added rlm_sql (sql): Adding client 192.168.10.215 (radius01.syd1) to global clients list rlm_sql (192.168.10.215): Client "radius01.syd1" (sql) added rlm_sql (sql): Adding client 192.168.10.222 (radius02.syd1) to global clients list rlm_sql (192.168.10.222): Client "radius02.syd1" (sql) added rlm_sql (sql): Released connection (0) # Instantiating module "sqlippool" from file /etc/raddb/mods-enabled/sqlippool Ignoring "allocate_clear_timeout = 1", forcing to "allocate_clear_timeout = 1" # Instantiating module "detail.my-company.net.au" from file /etc/raddb/mods-enabled/detail.my-company.net.au } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/raddb/radiusd.conf } # server server combined { # from file /etc/raddb/sites-enabled/combined-walled-garden # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type CHAP for attr Auth-Type Compiling Auth-Type MS-CHAP for attr Auth-Type # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading session {...} # Loading post-auth {...} Compiling Post-Auth-Type REJECT for attr Post-Auth-Type } # server combined server combined-nbn { # from file /etc/raddb/sites-enabled/combined-walled-garden-nbn # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type CHAP for attr Auth-Type Compiling Auth-Type MS-CHAP for attr Auth-Type # Loading authorize {...} # Loading accounting {...} # Loading session {...} # Loading post-auth {...} Compiling Post-Auth-Type REJECT for attr Post-Auth-Type } # server combined-nbn server coa { # from file /etc/raddb/sites-enabled/coa # Loading recv-coa {...} # Loading send-coa {...} } # server coa server read-detail.my-company.net.au { # from file /etc/raddb/sites-enabled/decoupled-accounting-my-company # Loading preacct {...} # Loading accounting {...} } # server read-detail.my-company.net.au server status { # from file /etc/raddb/sites-enabled/status # Loading authorize {...} Compiling Autz-Type Status-Server for attr Autz-Type } # server status radiusd: #### Opening IP addresses and Ports #### listen { type = "control" listen { socket = "/var/run/radiusd/radiusd.sock" mode = "rw" peercred = yes } } listen { type = "coa" virtual_server = "coa" ipaddr = * port = 3799 client radius01.syd1 { ipaddr = 192.168.10.215 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Ignoring duplicate client 192.168.10.215 client radius02.syd1 { ipaddr = 192.168.10.222 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Ignoring duplicate client 192.168.10.222 } listen { type = "auth" ipaddr = * port = 1815 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 1816 } listen { type = "auth" ipaddr = * port = 1820 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 1821 } listen { type = "detail" listen { filename = "/var/log/radius/radacct/detail-*:*" load_factor = 70 poll_interval = 1 retry_interval = 30 one_shot = no track = yes } } listen { type = "status" ipaddr = 127.0.0.1 port = 18121 client admin { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } } Listening on command file /var/run/radiusd/radiusd.sock Listening on coa address * port 3799 bound to server coa Listening on auth address * port 1815 bound to server combined Listening on acct address * port 1816 bound to server combined Listening on auth address * port 1820 bound to server combined-nbn Listening on acct address * port 1821 bound to server combined-nbn Listening on detail file /var/log/radius/radacct/detail-*:* as server read-detail.my-company.net.au Listening on status address 127.0.0.1 port 18121 bound to server status Ready to process requests

2 1

freeradius 3 - nas-identifier - policy
by Daniel Schwarting 26 May '21

26 May '21

Hello, I have a Sophos with 3 wlan / the Sophos can do only 1 radius server (production server). first I wanted to use realms, then I saw nas-identifier depending the nas-identifier , I want to use a different auth-host. now I wrote in the default site authorize { # filter_username preprocess if(NAS-Identifier == "wlan1") { wlan1 } elsif (NAS-Identifier == "wlan2") { wlan2 } elsif (NAS-Identifier == “wlan3") { wlan3 } where do I do the policy for wlanX … to set the auth-host and how ? Mit herzlichen Grüßen und bleiben Sie gesund! i.A. Daniel Schwarting [cid:logo_2016.png@4D1BF87E.0001] [cid:DocuWare_3monate_signatur.gif@C13BFCE4.0002]<https://www.system.ag/docuware-angebot> [http://landing.atdata.de/mail/hr.gif] at data Infrastruktur GmbH Funktionierende IT-Lösungen Robert-Bosch-Straße 7 88487 Mietingen Fon +49 (7392) 91396-0 Fax +49 (7392) 91396-10 info(a)atdata.de <mailto:info@atdata.de> <http://www.atdata.de/> SYSTEM AG Für IT-Lösungen Auelsweg 16 53797 Lohmar Fon +49 (2246) 9202-0 Fax +49 (2246) 9202-90 info(a)system.ag <mailto:info@system.ag>www.system.ag <http://www.system.ag/> [http://landing.atdata.de/mail/hr.gif] at data Infrastruktur GmbH ist vertreten in Aulendorf - Rastatt - Mietingen - Köln - Bonn - Rottenburg - Kaufering - Marquartstein - Albstadt SYSTEM AG ist vertreten in Köln - Bonn - Essen - Bremen - Castrop-Rauxel - Münster - Wiesbaden - Siegen - Göttingen – Giessen [http://landing.atdata.de/mail/hr.gif] [cid:Facebook32px.gif@295027EF.0003]<https://www.facebook.com/atdatagmbh> [cid:Twitter32px.gif@D69D1FB8.0004] <https://twitter.com/atdatagmbh> [cid:XING32px.gif@5397C277.0005] <https://www.xing.com/companies/atdatagmbh> [cid:YouTube32px.gif@9247124A.0006] <https://www.youtube.com/user/atdatagmbh> [cid:Instagram_32px.png@A4727509.0007] <https://www.instagram.com/systemag_atdata/> [cid:linkedin-icon_43_px.png@CB6719A2.0008] <https://www.linkedin.com/company/system-ag-f%C3%BCr-it-l%C3%B6sungen-data-g…> Geschäftsführer: Christoph Szokolai, Patrick Schindler, Amtsgericht Mannheim: HRB 521717, Umsatzsteuer-ID Nr: DE183783838 Unsere Informationen zum Datenschutz finden Sie hier<https://www.system.ag/datenschutz>. Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte Informationen. Wenn Sie nicht der richtige Adressat sind oder diese Nachricht irrtümlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese E-Mail. Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser E-Mail ist nicht gestattet. [cid:s10_logo.jpg@7D460E71.0009]

3 2