- Freeradius-Users - lists.freeradius.org

[main_pool] Could not find Pool-Name attribute
by robbe 14 Nov '08

14 Nov '08

Hello I'm trying to use the ippool for wlan users. But without success. I now get tis error: [main_pool] Could not find Pool-Name attribute . And I have no idea why. The logile can be read at: http://pastebin.com/m50a78a30 Thanks for every help. robbe -- View this message in context: http://www.nabble.com/-main_pool--Could-not-find-Pool-Name-attribute-tp2048… Sent from the FreeRadius - User mailing list archive at Nabble.com.

2 1

Wpa Supplicant on Win XP with SP 2
by Queenie de Melo 14 Nov '08

14 Nov '08

Dear All, Iam using Windows XP with service Pack 2 with D-Link USB client DWL-G122 When I use windows as my suplicant, I do not get all the optioons supported by my AP. But In case I RightClick on the wireless connection in the Network connections, and goto properties-- > Wireless Network tab and uncheck option Use windows to configure my wireless network settings, then my D-Link Utility pops up with gives me all the options ex: PEAP with MD5 (windows gives me only PEAP with MSCHAPv2 option only) Is there anyone who has faced the same and resolved it. Does windows need a patch etc? Pl help. Warm regards Queenie

2 1

Error in initializing EAP module
by Nayan Gjain 14 Nov '08

14 Nov '08

I am trying to run freeradius server on linux2.4 version I am able to ./configure, make, make install successfully. But when i am running this with -X(debugging), I am getting the following error message on server: rlm_eap:Failed to link EAP-Type/aka:file not found /usr/localetc/raddb/eap.conf[17]:Instantiation failed for module "eap" /usr/local/etc/raddb/sites-enabled/inner-tunnel[223]:failed to find module "eap" /usr/local/etc/raddb/sites-enabled/inner-tunnel[176]:Errors parsing authentication section } } Error initialising modules This same freeradius server is working properly on linux2.6 version. can anyone help me !!!!! Warm Regards, NAYAN JAIN (280609) SE (Software Engineer - 50PE) ______________________________________________________________________

3 11

Opendirectory with group checking
by Paul Bartell 14 Nov '08

14 Nov '08

Hello, I have successfully set up freeradius on OSX 10.5 with recent CVS version of freeradius, and am confused as to how i would only allow users within a specified group to be allowed access. Mainly, where do i define GroupName? (or am i not understanding http://wiki.freeradius.org/Rlm_ldap quite right?) -- Random quote of the week/month/whenever i get to updating it: "Opportunity knocked. My doorman threw him out." - Adrienne Gusoff "At school you don't get parole, good behavior only brings a longer sentence." - The History Boys

1 0

rlm_counter: Failed to open file /etc/raddb/db.daily: Permission denied
by Ted Lum 13 Nov '08

13 Nov '08

Any idea how to fix this? Wed Nov 12 21:29:16 2008 : Error: rlm_counter: Failed to open file /etc/raddb/db.daily: Permission denied Wed Nov 12 21:29:16 2008 : Error: /etc/raddb/radiusd.conf[152]: Instantiation failed for module "daily" Wed Nov 12 21:29:16 2008 : Error: Errors initializing modules This is an rpmbuild on Centos 5.2 radiusd: FreeRADIUS Version 2.1.1, for host i686-redhat-linux-gnu, built on Nov 11 2008 at 10:29:34 /etc drwxrwxr-x 7 root radiusd 4096 Nov 12 21:29 raddb /etc/raddb -rw------- 1 radiusd radiusd 12312 Nov 12 21:29 db.daily This works: # /usr/sbin/radiusd -X This works: # strace /usr/sbin/radiusd This does not work: # service radiusd start Starting RADIUS server: [FAILED] This does not work: counter daily { filename = ${raddbdir}/db.daily . . . This does not work: counter daily { filename = /tmp/db.daily . . . -Ted- -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

2 2

FreeRadius 2.1.1 - OpenLDAP + NT hash + PEAP
by CJ O 13 Nov '08

13 Nov '08

Good Afternoon - I've read through a lot of threads and documents and have piced information together, however I am still having issues. We are running an OpenLDAP with the passwords encrypted. I know that PEAP requires the clear text password to be stored in the LDAP Server, however, I've read also that as long as FreeRadius can get the NTLM Password from LDAP PEAP should work. We have also created a custom attribute call ntPasswd that hold the NTLM Hash of the users password. I have configured FreeRadius to authenicate to the LDAP server and set the password_attribute = ntPasswd. In the ldap.attrmap I've added to entries checkItem LM-Password ntPasswd and checkItem NT-Password ntPasswd. In eap.conf i've set default_eap_type = peap In site-enable/default under authorize I've uncommented ldap. The issue i am having is FreeRadius is not comparing the client password to the NT hash. Any help would be great. Thanks CJ ---- Debug ---- freeradius1:/usr/local/etc/raddb# radiusd -Xf FreeRADIUS Version 2.1.1, for host i686-pc-linux-gnu, built on Nov 7 2008 at 07:17:14 Copyright (C) 1999-2008 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /usr/local/etc/raddb/radiusd.conf including configuration file /usr/local/etc/raddb/proxy.conf including configuration file /usr/local/etc/raddb/clients.conf including files in directory /usr/local/etc/raddb/modules/ including configuration file /usr/local/etc/raddb/modules/detail.example.com including configuration file /usr/local/etc/raddb/modules/mac2vlan including configuration file /usr/local/etc/raddb/modules/files including configuration file /usr/local/etc/raddb/modules/counter including configuration file /usr/local/etc/raddb/modules/chap including configuration file /usr/local/etc/raddb/modules/attr_filter including configuration file /usr/local/etc/raddb/modules/sradutmp including configuration file /usr/local/etc/raddb/modules/inner-eap including configuration file /usr/local/etc/raddb/modules/always including configuration file /usr/local/etc/raddb/modules/linelog including configuration file /usr/local/etc/raddb/modules/policy including configuration file /usr/local/etc/raddb/modules/etc_group including configuration file /usr/local/etc/raddb/modules/echo including configuration file /usr/local/etc/raddb/modules/detail.log including configuration file /usr/local/etc/raddb/modules/expr including configuration file /usr/local/etc/raddb/modules/ippool including configuration file /usr/local/etc/raddb/modules/realm including configuration file /usr/local/etc/raddb/modules/unix including configuration file /usr/local/etc/raddb/modules/pam including configuration file /usr/local/etc/raddb/modules/smbpasswd including configuration file /usr/local/etc/raddb/modules/mschap including configuration file /usr/local/etc/raddb/modules/krb5 including configuration file /usr/local/etc/raddb/modules/expiration including configuration file /usr/local/etc/raddb/modules/sql_log including configuration file /usr/local/etc/raddb/modules/detail including configuration file /usr/local/etc/raddb/modules/ldap including configuration file /usr/local/etc/raddb/modules/mac2ip including configuration file /usr/local/etc/raddb/modules/radutmp including configuration file /usr/local/etc/raddb/modules/digest including configuration file /usr/local/etc/raddb/modules/exec including configuration file /usr/local/etc/raddb/modules/preprocess including configuration file /usr/local/etc/raddb/modules/passwd including configuration file /usr/local/etc/raddb/modules/logintime including configuration file /usr/local/etc/raddb/modules/pap including configuration file /usr/local/etc/raddb/modules/wimax including configuration file /usr/local/etc/raddb/modules/acct_unique including configuration file /usr/local/etc/raddb/modules/checkval including configuration file /usr/local/etc/raddb/modules/attr_rewrite including configuration file /usr/local/etc/raddb/eap.conf including configuration file /usr/local/etc/raddb/sql.conf including configuration file /usr/local/etc/raddb/sql/mysql/dialup.conf including configuration file /usr/local/etc/raddb/sql/mysql/counter.conf including configuration file /usr/local/etc/raddb/policy.conf including files in directory /usr/local/etc/raddb/sites-enabled/ including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel including configuration file /usr/local/etc/raddb/sites-enabled/default including dictionary file /usr/local/etc/raddb/dictionary main { prefix = "/usr/local" localstatedir = "/usr/local/var" logdir = "/usr/local/var/log/radius" libdir = "/usr/local/lib" radacctdir = "/usr/local/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 allow_core_dumps = no pidfile = "/usr/local/var/run/radiusd/radiusd.pid" checkrad = "/usr/local/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } client x.x.7.0/24 { require_message_authenticator = no secret = "testing123" shortname = "private-network" } client x.x.1.0/24 { require_message_authenticator = no secret = "testing123-1" } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating expr Module: Linked to module rlm_expiration Module: Instantiating expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server inner-tunnel { modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating chap Module: Linked to module rlm_mschap Module: Instantiating mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no } Module: Linked to module rlm_unix Module: Instantiating unix unix { radwtmp = "/usr/local/var/log/radius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating eap eap { default_eap_type = "peap" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 2048 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 pem_file_type = yes private_key_file = "/usr/local/etc/raddb/certs/server.pem" certificate_file = "/usr/local/etc/raddb/certs/server.pem" CA_file = "/usr/local/etc/raddb/certs/ca.pem" private_key_password = "whatever" dh_file = "/usr/local/etc/raddb/certs/dh" random_file = "/usr/local/etc/raddb/certs/random" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/usr/local/etc/raddb/certs/bootstrap" cache { enable = no lifetime = 24 max_entries = 255 } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating suffix realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating files files { usersfile = "/usr/local/etc/raddb/users" acctusersfile = "/usr/local/etc/raddb/acct_users" preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users" compat = "no" } Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating radutmp radutmp { filename = "/usr/local/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating attr_filter.access_reject attr_filter attr_filter.access_reject { attrsfile = "/usr/local/etc/raddb/attrs.access_reject" key = "%{User-Name}" } } } modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating preprocess preprocess { huntgroups = "/usr/local/etc/raddb/huntgroups" hints = "/usr/local/etc/raddb/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Linked to module rlm_ldap Module: Instantiating ldap ldap { server = "ldapserver" port = 389 password = "password" identity = "uid=ServicesAccount_SSL-VPN,ou=specialaccts,dc=domain,dc=local" net_timeout = 1 timeout = 4 timelimit = 3 tls_mode = no start_tls = no tls_require_cert = "allow" tls { start_tls = no require_cert = "allow" } basedn = "dc=domain,dc=local" filter = "(uid=%{Stripped-User-Name:-%{User-Name}})" base_filter = "(objectclass=radiusprofile)" password_attribute = "ntPasswd" auto_header = no access_attr_used_for_allow = yes groupname_attribute = "cn" groupmembership_filter = "(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))" dictionary_mapping = "/usr/local/etc/raddb/ldap.attrmap" ldap_debug = 0 ldap_connections_number = 5 compare_check_items = no do_xlat = yes set_auth_type = yes } rlm_ldap: Registering ldap_groupcmp for Ldap-Group rlm_ldap: Registering ldap_xlat with xlat_name ldap rlm_ldap: Over-riding set_auth_type, as there is no module ldap listed in the "authenticate" section. rlm_ldap: reading ldap<->radius mappings from file /usr/local/etc/raddb/ldap.attrmap rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id rlm_ldap: LDAP ntPasswd mapped to RADIUS LM-Password rlm_ldap: LDAP ntPasswd mapped to RADIUS NT-Password rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network rlm_ldap: LDAP radiusClass mapped to RADIUS Class rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS Framed-AppleTalk-Network rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message conns: 0x817ec18 Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating detail detail { detailfile = "/usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Instantiating attr_filter.accounting_response attr_filter attr_filter.accounting_response { attrsfile = "/usr/local/etc/raddb/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host x.x.x.10 port 32770, id=146, length=182 User-Name = "testuser" Calling-Station-Id = "00-21-5C-57-E7-11" Called-Station-Id = "00-13-7F-BB-1F-40:Secure-SSID" NAS-Port = 29 NAS-IP-Address = x.x.x.10 NAS-Identifier = "WLC-9" Airespace-Wlan-Id = 4 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "3800" EAP-Message = 0x0202000e01636a206f6467657273 Message-Authenticator = 0x5115809cec2f1d9801f53acadedc2d50 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "testuser", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 2 length 14 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound ++[files] returns noop [ldap] performing user authorization for testuser [ldap] WARNING: Deprecated conditional expansion ":-". See "man unlang" for details [ldap] expand: (uid=%{Stripped-User-Name:-%{User-Name}}) -> (uid=testuser) [ldap] expand: dc=domain,dc=local -> dc=domain,dc=local rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: attempting LDAP reconnection rlm_ldap: (re)connect to ldapserver:389, authentication 0 rlm_ldap: bind as uid=ServicesAccount_SSL-VPN,ou=specialaccts,dc=domain,dc=local/password to ldapserver:389 rlm_ldap: waiting for bind result ... rlm_ldap: Bind was successful rlm_ldap: performing search in dc=domain,dc=local, with filter (uid=testuser) [ldap] Added User-Password = 777FC6CB013E74CAE115F5376AE1A402 in check items [ldap] looking for check items in directory... rlm_ldap: ntPasswd -> NT-Password == 0x3737374643364342303133453734434145313135463533373641453141343032 rlm_ldap: ntPasswd -> LM-Password == 0x3737374643364342303133453734434145313135463533373641453141343032 [ldap] looking for reply items in directory... [ldap] user testuser authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] Normalizing NT-Password from hex encoding [pap] Normalizing LM-Password from hex encoding [pap] Found existing Auth-Type, not changing it. ++[pap] returns noop Found Auth-Type = EAP !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!! Replacing User-Password in config items with Cleartext-Password. !!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!! Please update your configuration so that the "known good" !!! !!! clear text password is in Cleartext-Password, and not in User-Password. !!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! +- entering group authenticate {...} [eap] EAP Identity [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 146 to x.x.x.10 port 32770 EAP-Message = 0x010300061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x4dd2ec464dd1f53446e9c64b0f6714c5 Finished request 0. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host x.x.x.10 port 32770, id=147, length=306 User-Name = "testuser" Calling-Station-Id = "00-21-5C-57-E7-11" Called-Station-Id = "00-13-7F-BB-1F-40:Secure-SSID" NAS-Port = 29 NAS-IP-Address = x.x.x.10 NAS-Identifier = "WLC-9" Airespace-Wlan-Id = 4 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "3800" EAP-Message = 0x0203007819800000006e1603010069010000650301491b506cf8589316c9c4ec629451add4aed16e217f5b40942e0b96a9e5169c8e000018002f00350005000ac009c00ac013c0140032003800130004010000240000000e000c000009636a206f6467657273000a00080006001700180019000b00020100 State = 0x4dd2ec464dd1f53446e9c64b0f6714c5 Message-Authenticator = 0xd9f599756a521bc57c987673caff8838 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "testuser", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 3 length 120 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 110 [peap] Length Included [peap] eaptls_verify returned 11 [peap] (other): before/accept initialization [peap] TLS_accept: before/accept initialization [peap] <<< TLS 1.0 Handshake [length 0069], ClientHello [peap] TLS_accept: SSLv3 read client hello A [peap] >>> TLS 1.0 Handshake [length 002a], ServerHello [peap] TLS_accept: SSLv3 write server hello A [peap] >>> TLS 1.0 Handshake [length 085e], Certificate [peap] TLS_accept: SSLv3 write certificate A [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [peap] TLS_accept: SSLv3 write server done A [peap] TLS_accept: SSLv3 flush data [peap] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 147 to x.x.x.10 port 32770 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0xa73082038fa0030201020209 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x4dd2ec464cd6f53446e9c64b0f6714c5 Finished request 1. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host x.x.x.10 port 32770, id=148, length=192 User-Name = "testuser" Calling-Station-Id = "00-21-5C-57-E7-11" Called-Station-Id = "00-13-7F-BB-1F-40:Secure-SSID" NAS-Port = 29 NAS-IP-Address = x.x.x.10 NAS-Identifier = "WLC-9" Airespace-Wlan-Id = 4 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "3800" EAP-Message = 0x020400061900 State = 0x4dd2ec464cd6f53446e9c64b0f6714c5 Message-Authenticator = 0x61db949d689e1dd395d364b75296c414 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "testuser", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 4 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 148 to x.x.x.10 port 32770 EAP-Message = 0x010503fc19400082616c3e6bea4cca300d06092a864886f70d0101050500308193310b3009060355040613024652310f300d060355040813065261646975733112301006035504071309536f6d65776865726531153013060355040a130c4578616d706c6520496e632e3120301e06092a864886f70d010901161161646d696e406578616d706c652e636f6d312630240603550403131d4578616d706c6520436572746966696361746520417574686f72697479301e170d3038313130393133343034355a170d3038313230393133343034355a308193310b3009060355040613024652310f300d060355040813065261646975733112301006035504 EAP-Message = 0x071309536f6d65776865726531153013060355040a130c4578616d706c6520496e632e3120301e06092a864886f70d010901161161646d696e406578616d706c652e636f6d312630240603550403131d4578616d706c6520436572746966696361746520417574686f7269747930820122300d06092a864886f70d01010105000382010f003082010a0282010100a8b9be6302fea237a9db89315baf9fe88608dad5eb1cdf05c7d574d480146f424cfd104bcde2661bc6e684498b8cfcdfc90a13b22d3fdd0a7e825b80fb4860057a1e53bfa9f10bb39fb3234e4147d4fb6ef4cf54764173463282fbdd41e989d82d9062fb2080f3d2d1a80203746e99 EAP-Message = 0x045d2648f95a3bdbe99b6a8a9b6daf773e77dfead7fb81196a3f9dd312f801ac8db78ac53295011279a3a28a9dc20728249244acdbc5b098f41cfd1b9a789702deebd1f93f816b12210a4d9189589413dec4f015b496923bb100bc4776d5b6efc638c0ae8ebae899c09ca48095a338fc145e0f289753be1474ade1dd5c9974359dc7e4473204b987ff08bb67db1d4fa8d10203010001a381fb3081f8301d0603551d0e04160414842dd8dd402be91d615d3e8cdb3fa3a8d3b4fb763081c80603551d230481c03081bd8014842dd8dd402be91d615d3e8cdb3fa3a8d3b4fb76a18199a48196308193310b3009060355040613024652310f300d06035504 EAP-Message = 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 EAP-Message = 0x8a5b958e645e5248 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x4dd2ec464fd7f53446e9c64b0f6714c5 Finished request 2. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host x.x.x.10 port 32770, id=149, length=192 User-Name = "testuser" Calling-Station-Id = "00-21-5C-57-E7-11" Called-Station-Id = "00-13-7F-BB-1F-40:Secure-SSID" NAS-Port = 29 NAS-IP-Address = x.x.x.10 NAS-Identifier = "WLC-9" Airespace-Wlan-Id = 4 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "3800" EAP-Message = 0x020500061900 State = 0x4dd2ec464fd7f53446e9c64b0f6714c5 Message-Authenticator = 0xcfa7268a0b8b3761fa470881b918902a +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "testuser", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 5 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 149 to x.x.x.10 port 32770 EAP-Message = 0x010600b51900c7568c10dda20d80a7734d1001d6c0c31f7726e896e8e9660871d0e12431943bfca086adcb5d20e845fcf93a03ea8b063f6d67ee257c9af247b723851c04e2a190b9d1d03a6e9d5e72b1fe6d3bbe2432ead72e92d740011ea1c25f269959ede0598cd754f9ea0b2ba88bf2e093aaf31eca3090af17efe3d772557ad4905fbdf39304683dcbb7c4e9a4ee77a4f1c1c2a2a192a306803a31230649cdc0f625ba7ead658149867c16030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x4dd2ec464ed4f53446e9c64b0f6714c5 Finished request 3. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host x.x.x.10 port 32770, id=150, length=524 User-Name = "testuser" Calling-Station-Id = "00-21-5C-57-E7-11" Called-Station-Id = "00-13-7F-BB-1F-40:Secure-SSID" NAS-Port = 29 NAS-IP-Address = x.x.x.10 NAS-Identifier = "WLC-9" Airespace-Wlan-Id = 4 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "3800" EAP-Message = 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 EAP-Message = 0x0ee966f41c7c63228c22068b3679bd502d70b313028342831403010001011603010030b4ba684f5634d66724c68b2f7556438a688cf347efd44b5de6246e23b8df8bb164e2ca9cd80064a6021b612c63e96c7e State = 0x4dd2ec464ed4f53446e9c64b0f6714c5 Message-Authenticator = 0x7879b64f2c6f82355d5c4b2dd85a17c8 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "testuser", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 6 length 253 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 326 [peap] Length Included [peap] eaptls_verify returned 11 [peap] <<< TLS 1.0 Handshake [length 0106], ClientKeyExchange [peap] TLS_accept: SSLv3 read client key exchange A [peap] <<< TLS 1.0 ChangeCipherSpec [length 0001] [peap] <<< TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 read finished A [peap] >>> TLS 1.0 ChangeCipherSpec [length 0001] [peap] TLS_accept: SSLv3 write change cipher spec A [peap] >>> TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 write finished A [peap] TLS_accept: SSLv3 flush data [peap] (other): SSL negotiation finished successfully SSL Connection Established [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 150 to x.x.x.10 port 32770 EAP-Message = 0x0107004119001403010001011603010030bd79c342cd95f54dfdbca3369c0b2fad215dab91aa1d0c3a0848ebb465a3ab4aac928bf10f068caeda68aa0e3aac98b1 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x4dd2ec4649d5f53446e9c64b0f6714c5 Finished request 4. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host x.x.x.10 port 32770, id=151, length=192 User-Name = "testuser" Calling-Station-Id = "00-21-5C-57-E7-11" Called-Station-Id = "00-13-7F-BB-1F-40:Secure-SSID" NAS-Port = 29 NAS-IP-Address = x.x.x.10 NAS-Identifier = "WLC-9" Airespace-Wlan-Id = 4 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "3800" EAP-Message = 0x020700061900 State = 0x4dd2ec4649d5f53446e9c64b0f6714c5 Message-Authenticator = 0x6f4573d07e368ab714706c6e96d91112 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "testuser", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 7 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake is finished [peap] eaptls_verify returned 3 [peap] eaptls_process returned 3 [peap] EAPTLS_SUCCESS ++[eap] returns handled Sending Access-Challenge of id 151 to x.x.x.10 port 32770 EAP-Message = 0x0108002b190017030100202e2c2752b63fc9fd5a697def2700812ad18b3d64accf2b5045db9b8ad7610364 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x4dd2ec4648daf53446e9c64b0f6714c5 Finished request 5. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host x.x.x.10 port 32770, id=152, length=229 User-Name = "testuser" Calling-Station-Id = "00-21-5C-57-E7-11" Called-Station-Id = "00-13-7F-BB-1F-40:Secure-SSID" NAS-Port = 29 NAS-IP-Address = x.x.x.10 NAS-Identifier = "WLC-9" Airespace-Wlan-Id = 4 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "3800" EAP-Message = 0x0208002b19001703010020af176d96934ad8cbb0e937a77911d4ace8aa4b56ae403eb5fab8a07547838c6e State = 0x4dd2ec4648daf53446e9c64b0f6714c5 Message-Authenticator = 0x6622ef250f7059a7d9f94d2ff0e79460 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "testuser", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 8 length 43 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Identity - testuser [peap] Got tunnled request EAP-Message = 0x0208000e01636a206f6467657273 server (null) { PEAP: Got tunneled identity of testuser PEAP: Setting default EAP type for tunneled EAP session. PEAP: Setting User-Name to testuser Sending tunneled request EAP-Message = 0x0208000e01636a206f6467657273 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "testuser" server inner-tunnel { +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop ++[unix] returns notfound [suffix] No '@' in User-Name = "testuser", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[control] returns noop [eap] EAP packet type response id 8 length 14 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] EAP Identity [eap] processing type mschapv2 rlm_eap_mschapv2: Issuing Challenge ++[eap] returns handled } # server inner-tunnel [peap] Got tunneled reply code 11 EAP-Message = 0x010900231a0109001e10574b260e0da246f24e07c78041ab5eab636a206f6467657273 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x133ac6de1333dc16b91cf378e66ac041 [peap] Got tunneled reply RADIUS code 11 EAP-Message = 0x010900231a0109001e10574b260e0da246f24e07c78041ab5eab636a206f6467657273 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x133ac6de1333dc16b91cf378e66ac041 [peap] Got tunneled Access-Challenge ++[eap] returns handled Sending Access-Challenge of id 152 to x.x.x.10 port 32770 EAP-Message = 0x0109004b19001703010040d6d1a2c86336f438eba3d74bfb8d6d6e0b8d7a3485810bd6e94c0c0babfa40d608eef8171dd5ad218e87600a0edd7d17d171b56a565d9dc08c53b885889eb181 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x4dd2ec464bdbf53446e9c64b0f6714c5 Finished request 6. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host x.x.x.10 port 32770, id=153, length=293 User-Name = "testuser" Calling-Station-Id = "00-21-5C-57-E7-11" Called-Station-Id = "00-13-7F-BB-1F-40:Secure-SSID" NAS-Port = 29 NAS-IP-Address = x.x.x.10 NAS-Identifier = "WLC-9" Airespace-Wlan-Id = 4 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "3800" EAP-Message = 0x0209006b1900170301006004a5d7bfa6160831bc3a9ffb1dad4ab15ff0f4ea416409d7a020d8186503bfe3662d1136007d7e15f1a6aefa6870bd27e6316cadb8a50230786fdb59d42cebf834fd3980e455b47a4c8af55ccfbd4c778d4c27407c5847dfcbf6445ca84f2964 State = 0x4dd2ec464bdbf53446e9c64b0f6714c5 Message-Authenticator = 0x266718b04858a96eaa6f2b6122e9222a +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "testuser", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 9 length 107 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] EAP type mschapv2 [peap] Got tunnled request EAP-Message = 0x020900441a0209003f31106f8244e95d9958a6b979a3f28868dd0000000000000000d660654d859f4207dfe7b2bb26ae66e4eb3eed1b3e9a3e2600636a206f6467657273 server (null) { PEAP: Setting User-Name to testuser Sending tunneled request EAP-Message = 0x020900441a0209003f31106f8244e95d9958a6b979a3f28868dd0000000000000000d660654d859f4207dfe7b2bb26ae66e4eb3eed1b3e9a3e2600636a206f6467657273 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "testuser" State = 0x133ac6de1333dc16b91cf378e66ac041 server inner-tunnel { +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop ++[unix] returns notfound [suffix] No '@' in User-Name = "testuser", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[control] returns noop [eap] EAP packet type response id 9 length 68 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/mschapv2 [eap] processing type mschapv2 [mschapv2] +- entering group MS-CHAP {...} [mschap] No Cleartext-Password configured. Cannot create LM-Password. [mschap] No Cleartext-Password configured. Cannot create NT-Password. [mschap] Told to do MS-CHAPv2 for testuser with NT-Password [mschap] FAILED: No NT/LM-Password. Cannot perform authentication. [mschap] FAILED: MS-CHAP2-Response is incorrect ++[mschap] returns reject [eap] Freeing handler ++[eap] returns reject Failed to authenticate the user. } # server inner-tunnel [peap] Got tunneled reply code 3 MS-CHAP-Error = "\tE=691 R=1" EAP-Message = 0x04090004 Message-Authenticator = 0x00000000000000000000000000000000 [peap] Got tunneled reply RADIUS code 3 MS-CHAP-Error = "\tE=691 R=1" EAP-Message = 0x04090004 Message-Authenticator = 0x00000000000000000000000000000000 [peap] Tunneled authentication was rejected. [peap] FAILURE ++[eap] returns handled Sending Access-Challenge of id 153 to x.x.x.10 port 32770 EAP-Message = 0x010a002b190017030100206ca1154436c8bc056cd5ed016047a55153c6057af56eb9a88b77ccb6249273f6 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x4dd2ec464ad8f53446e9c64b0f6714c5 Finished request 7. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host x.x.x.10 port 32770, id=154, length=229 User-Name = "testuser" Calling-Station-Id = "00-21-5C-57-E7-11" Called-Station-Id = "00-13-7F-BB-1F-40:Secure-SSID" NAS-Port = 29 NAS-IP-Address = x.x.x.10 NAS-Identifier = "WLC-9" Airespace-Wlan-Id = 4 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "3800" EAP-Message = 0x020a002b19001703010020abb184ced74a615ce148865434ec296711bac8cf268be5c0c61af040071c3613 State = 0x4dd2ec464ad8f53446e9c64b0f6714c5 Message-Authenticator = 0xb63504030ac01d7fe661e0fa7a32df77 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "testuser", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 10 length 43 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Received EAP-TLV response. [peap] Had sent TLV failure. User was rejected earlier in this session. [eap] Handler failed in EAP/peap [eap] Failed in EAP select ++[eap] returns invalid Failed to authenticate the user. Using Post-Auth-Type Reject +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> testuser attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 8 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 8 Sending Access-Reject of id 154 to x.x.x.10 port 32770 EAP-Message = 0x040a0004 Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.9 seconds. Cleaning up request 0 ID 146 with timestamp +12 Cleaning up request 1 ID 147 with timestamp +12 Cleaning up request 2 ID 148 with timestamp +12 Cleaning up request 3 ID 149 with timestamp +12 Cleaning up request 4 ID 150 with timestamp +12 Cleaning up request 5 ID 151 with timestamp +12 Cleaning up request 6 ID 152 with timestamp +12 Cleaning up request 7 ID 153 with timestamp +12 Waking up in 1.0 seconds. Cleaning up request 8 ID 154 with timestamp +12 Ready to process requests.

3 6

Multiple database and virtual server
by Michael Plourde 13 Nov '08

13 Nov '08

Hi, I want to use multiple database to sort different kind of radius authentification (dialup, wireless, router login, etc). I don't know if i'm using it the right way, but I have try to run freeradius with two virtual server using two different sql instance. Those sql instance are configured the same way except for the database: one use "radius_db = radius_dialup" and the other one "radius_db = radius_login". If I load only one of those virtual server at radiusd startup (I remove sites-enabled links for one of those server), everything works fine. If I try them together, I got this error: Adding client 172.16.0.2 (gw-calma.digicom.ca, server=MT-Login-User) to clients list Failed to add duplicate client gw-calma.digicom.ca rlm_sql (sql_MT): Failed to add client 172.16.0.2 (gw-calma.digicom.ca) to clients list. Maybe there's a duplicate? Failed to load clients from SQL. The previous Virtual server client list contain: rlm_sql (sql_dialup): Read entry nasname=172.16.0.113,shortname=test,secret=secret rlm_sql (sql_dialup): Adding client 172.16.0.113 (test, server=dialup) to clients list rlm_sql (sql_dialup): Read entry nasname=172.16.0.2,shortname=calma,secret=xxxxxx rlm_sql (sql_dialup): Adding client 172.16.0.2 (calma, server=dialup) to clients list rlm_sql (sql_dialup): Read entry nasname=10.0.0.2,shortname=PowerAP-test,secret=xxxxx rlm_sql (sql_dialup): Adding client 10.0.0.2 (PowerAP-test, server=dialup) to clients list rlm_sql (sql_dialup): Read entry nasname=10.10.0.5,shortname=395scott,secret=xxxxxx rlm_sql (sql_dialup): Adding client 10.10.0.5 (395scott, server=dialup) to clients list rlm_sql (sql_dialup): Read entry nasname=172.16.0.237,shortname=calma2,secret=xxxxxx rlm_sql (sql_dialup): Adding client 172.16.0.237 (calma2, server=dialup) to clients list Doesn't each virtual server had his own clients list ? Why duplicate entry ? How can I force freeradius to use one client list per virtual server taken from SQL table ? Regards, Michael Plourde

2 3

sqlcounter returning wrong value?
by liran tal 13 Nov '08

13 Nov '08

Hey, I'm experimenting with some sqlcounter directives in radiusd.conf and chilli as the NAS. I've defined the following sqlcounter stanza for a daily traffic limit: sqlcounter defined in radiusd.conf: (the query was corrected as suggested by tnt on a previous thread on the list, correct me if I got it wrong please) sqlcounter counterChilliSpotMaxDailyOctets { counter-name = ChilliSpot-Max-Daily-Octets check-name = ChilliSpot-Max-Daily-Octets reply-name = ChilliSpot-Max-Total-Octets sqlmod-inst = sql key = User-Name reset = daily error-msg = "Sorry, your maximum traffic usage (download and upload) has exceed the provided limit" query = "SELECT (SUM(AcctInputOctets + AcctOutputOctets)) FROM radacct WHERE UserName='%{%k}' AND UNIX_TIMESTAMP(AcctStartTime) + AcctSessionTime > '%b'" } In the authorization phase, I'm seeing the following in debug log: rlm_sqlcounter: Entering module authorize code sqlcounter_expand: 'SELECT (SUM(AcctInputOctets)+SUM(AcctOutputOctets)) FROM radacct WHERE UserName='%{User-Name}'' radius_xlat: 'SELECT (SUM(AcctInputOctets)+SUM(AcctOutputOctets)) FROM radacct WHERE UserName='tester1'' sqlcounter_expand: '%{sql:SELECT (SUM(AcctInputOctets)+SUM(AcctOutputOctets)) FROM radacct WHERE UserName='tester1'}' radius_xlat: Running registered xlat function of module sql for string 'SELECT (SUM(AcctInputOctets)+SUM(AcctOutputOctets)) FROM radacct WHERE UserName='tester1'' rlm_sql (sql): - sql_xlat radius_xlat: 'tester1' rlm_sql (sql): sql_set_user escaped user --> 'tester1' radius_xlat: 'SELECT (SUM(AcctInputOctets)+SUM(AcctOutputOctets)) FROM radacct WHERE UserName='tester1'' rlm_sql (sql): Reserving sql socket id: 2 rlm_sql (sql): - sql_xlat finished rlm_sql (sql): Released sql socket id: 2 radius_xlat: '24004370' rlm_sqlcounter: (Check item - counter) is greater than zero rlm_sqlcounter: Authorized user tester1, check_item=26214400, counter=24004370 rlm_sqlcounter: Sent Reply-Item for user tester1, Type=ChilliSpot-Max-Total-Octets, value=26239950 modcall[authorize]: module "counterChilliSpotMaxDailyOctets" returns ok for request 0 The entry in radcheck is as follows: | 346 | tester1 | ChilliSpot-Max-Daily-Octets | := | 26214400 | What happens is that it seems the counter doesn't work as expected. When a user logs in, performs some traffic usage, logs out and logs in again, the replied back attribute for chilli doesn't contain a value which is the remainder of the traffic usage, but something else. According to the radius debug above, if check_item=26214400 and counter=24004370, how come value=26239950? So I'm guessing I'm missing something but I'm too obsessed with the sqlcounter to notice it. (is the subtractation not a normal decimal action?) The FreeRADIUS version used is 1.1.7 Regards, Liran.

6 23

how to sending EAP-Request/Identity in EAP AKA
by Mohammad Belgaumkar 13 Nov '08

13 Nov '08

Hi All, I m using freeradius as EAP AKA server . When i run radiusd ,it waits for requests from peer. If server wants to send "EAP-Request/Identity" then how it should be done? I want the server to request the identity from peer. Please help Thanks Regards Mohammad Arif Belgaumkar L&T Infotech Ltd, Whitefield, Bangalore - 66 Ph - 91-80-66242424 extn 2018 www.Lntinfotech.com ( ) L&T Infotech General Business (+) L&T Infotech Internal Use ( ) L&T Infotech Confidential ( ) L&T Infotech Proprietary Larsen & Toubro Infotech Ltd. www.Lntinfotech.com This Document is classified as: |------| | [X] | |------|L&T Infotech Proprietary |------| | [ ] | |------|L&T Infotech Confidential |------| | [ ] | |------| L&T Infotech Internal Use Only |------| | [ ] | |------|L&T Infotech General Business This Email may contain confidential or privileged information for the intended recipient (s) If you are not the intended recipient, please do not use or disseminate the information, notify the sender and delete it from your system. ______________________________________________________________________

3 2

rlm_ldap and auto_header
by Tim Palmer 12 Nov '08

12 Nov '08

After fighting with an upgrade from freeradius-1.0.3 to 2.1.1, both do a simple LDAP authorize/PAP authenticate (no tls, no eap, no chap, no inner-tunnel, nothing else), I've stumbled on what seems to fix my problem, and am curious if my fix makes sense, and will continue to be supported. I'm not including full debug output and config files in this post because I'm not looking for help on what I've done wrong, just whether this part of the configuration is valid. I'm happy to provide more detail if its desired. Built from freeradius-server-2.1.1 source, downloaded about 2 weeks ago from the Freeradius main site, on FreeBSD 7-1-PRERELEASE. With 2.1.1, I had no trouble getting rlm_ldap to connect to my OpenLDAP server, and after putting in a Cleartext-Passwrod entry in ldap.attrsmap, rlm_ldap would authorize fine, and everything seemed ok, except I couldn't get pap to understand the encryption scheme: [pap] Found existing Auth-Type, not changing it. ++[pap] returns noop Found Auth-Type = PAP +- entering group PAP {...} [pap] login attempt with password "testing" [pap] Using clear text password "{crypt}$1$Moq9XEC8$PRA5/NGFUrskxI52Nv8rm." [pap] Passwords don't match ++[pap] returns reject Failed to authenticate the user. Login incorrect (rlm_pap: CLEAR TEXT password check failed): [test/testing] (from client localhost port 1) No amount of changing settings in modules/pap and other config files would help. I finally noticed in the rlm_ldap debug output "auto_headers = no". So, I set auto_headers = yes in modules/ldap, and login passes. Remove it, and login fails. Is it only some odd ball, simplistic configurations like mine that this should be required? I was unable to find any mention of this as an ldap module setting except in rlm_ldap.c, which I didn't think to look in until after the fact. Thank you for your time, tim

5 11