- Freeradius-Users - lists.freeradius.org

RE: Regular Expression Syntax Error: Invalid regex in realm
by tnt＠kalik.net 10 Nov '08

10 Nov '08

realm "~\\.example\\.com$" { authhost = LOCAL # not strictly necessary accthost = LOCAL # not strictly necessary } Remove that * after ~. Or put w in front of *. Ivan Kalik Kalik Informatika ISP

2 2

Pam radius with non-unix user
by Fatma 10 Nov '08

10 Nov '08

Hi all, I am developing a small application in which I am using the pam library (version 1.3.17<ftp://ftp.freeradius.org/pub/radius/pam_radius-1.3.17.tar.gz>) from the freeRadius web site. I have configured the file under /etc/pam.conf of my first station1 to support the PAM radius module in order to authenticate my user against the RADIUS server running on the my station2. I have a non-unix user "fatma" which is successfully authenticated against the RADIUS server. My question is is it possible to login to station1 with the user "fatma" even when this user isn't a unix user. In fact, I have set all flags in the /etc/pam.conf to optional then I have connected to the station1 through rlogin but the authentication failed. The only way to authenticate the user fatma is to add it in the station1. I just need to know if this behavior is correct or may be I need something else. Regards, --Fatma

1 0

User found on DEFAULT server log but not in tunneled virtual server log
by Sergio Belkin 10 Nov '08

10 Nov '08

Hi, I am using FreeRADIUS Version 2.1.1. I am using EAP with TTLS and PEAP. I think that I''ve figure it out how to separate logs from each one of them. I've found some users that exists on DEFAULT server log but not on inner virtual server, for example: /var/log/radius-new/radiusd-DEFAULT-20081110.log:Mon Nov 10 08:55:37 2008 : Auth: Login OK: [mmende13] (from client UP-Ecuador port 58 cli 001ec2aa3969) Also there is /var/log/radius-new/radiusd-inner-tunnel-20081110.log (Inner Tunnel virtual server with TTLS) and /var/log/radius-new/radiusd-inner-tunnel-peap-20081110.log (Inner Tunnel virtual server with PEAP). But mmende13 is not there. Why? My configuration is as follows: FreeRADIUS Version 2.1.1, for host x86_64-unknown-linux-gnu, built on Oct 21 2008 at 15:14:37 Copyright (C) 1999-2008 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /usr/local/etc/raddb/radiusd.conf including configuration file /usr/local/etc/raddb/proxy.conf including configuration file /usr/local/etc/raddb/clients.conf including files in directory /usr/local/etc/raddb/modules/ including configuration file /usr/local/etc/raddb/modules/chap including configuration file /usr/local/etc/raddb/modules/mschap including configuration file /usr/local/etc/raddb/modules/exec including configuration file /usr/local/etc/raddb/modules/realm including configuration file /usr/local/etc/raddb/modules/checkval including configuration file /usr/local/etc/raddb/modules/passwd including configuration file /usr/local/etc/raddb/modules/attr_filter including configuration file /usr/local/etc/raddb/modules/linelog including configuration file /usr/local/etc/raddb/modules/wimax including configuration file /usr/local/etc/raddb/modules/pam including configuration file /usr/local/etc/raddb/modules/inner-eap including configuration file /usr/local/etc/raddb/modules/echo including configuration file /usr/local/etc/raddb/modules/acct_unique including configuration file /usr/local/etc/raddb/modules/etc_group including configuration file /usr/local/etc/raddb/modules/pap including configuration file /usr/local/etc/raddb/modules/expr including configuration file /usr/local/etc/raddb/modules/smbpasswd including configuration file /usr/local/etc/raddb/modules/attr_rewrite including configuration file /usr/local/etc/raddb/modules/radutmp including configuration file /usr/local/etc/raddb/modules/mac2ip including configuration file /usr/local/etc/raddb/modules/logintime including configuration file /usr/local/etc/raddb/modules/sql_log including configuration file /usr/local/etc/raddb/modules/preprocess including configuration file /usr/local/etc/raddb/modules/policy including configuration file /usr/local/etc/raddb/modules/digest including configuration file /usr/local/etc/raddb/modules/mac2vlan including configuration file /usr/local/etc/raddb/modules/files including configuration file /usr/local/etc/raddb/modules/always including configuration file /usr/local/etc/raddb/modules/detail including configuration file /usr/local/etc/raddb/modules/krb5 including configuration file /usr/local/etc/raddb/modules/sradutmp including configuration file /usr/local/etc/raddb/modules/counter including configuration file /usr/local/etc/raddb/modules/detail.example.com including configuration file /usr/local/etc/raddb/modules/ippool including configuration file /usr/local/etc/raddb/modules/expiration including configuration file /usr/local/etc/raddb/modules/detail.log including configuration file /usr/local/etc/raddb/modules/ldap including configuration file /usr/local/etc/raddb/modules/unix including configuration file /usr/local/etc/raddb/eap.conf including configuration file /usr/local/etc/raddb/sql.conf including configuration file /usr/local/etc/raddb/sql/mysql/dialup.conf including configuration file /usr/local/etc/raddb/sql/mysql/counter.conf including configuration file /usr/local/etc/raddb/policy.conf including files in directory /usr/local/etc/raddb/sites-enabled/ including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel including configuration file /usr/local/etc/raddb/sites-enabled/default including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel-peap group = radiusd user = radiusd including dictionary file /usr/local/etc/raddb/dictionary main { prefix = "/usr/local" localstatedir = "/usr/local/var" logdir = "/usr/local/var/log/radius" libdir = "/usr/local/lib" radacctdir = "/usr/local/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 allow_core_dumps = no pidfile = "/usr/local/var/run/radiusd/radiusd.pid" checkrad = "/usr/local/sbin/checkrad" debug_level = 0 proxy_requests = no log { stripped_names = yes auth = yes auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } client 10.128.255.100 { require_message_authenticator = no secret = "agatotIjejejejejejjejejejjejejejje-ojojoojoiamsantaklaus3" shortname = "Esprite-PI-PB" } client 10.128.255.10 { require_message_authenticator = no secret = "agatotIjejejejejejjejejejjejejejje-ojojoojoiamsantaklaus3" shortname = "Esprite-PI-SS" } client 10.128.255.11 { require_message_authenticator = no secret = "agatotIjejejejejejjejejejjejejejje-ojojoojoiamsantaklaus3" shortname = "Esprite-PI-1" } client 10.128.255.12 { require_message_authenticator = no secret = "agatotIjejejejejejjejejejjejejejje-ojojoojoiamsantaklaus3" shortname = "Esprite-PI-2" } client 10.128.255.13 { require_message_authenticator = no secret = "agatotIjejejejejejjejejejjejejejje-ojojoojoiamsantaklaus3" shortname = "Esprite-PI-3" } client 10.128.255.14 { require_message_authenticator = no secret = "agatotIjejejejejejjejejejjejejejje-ojojoojoiamsantaklaus3" shortname = "Esprite-PI-4" } client 10.128.255.15 { require_message_authenticator = no secret = "agatotIjejejejejejjejejejjejejejje-ojojoojoiamsantaklaus3" shortname = "Esprite-PI-5" } client 10.128.255.16 { require_message_authenticator = no secret = "agatotIjejejejejejjejejejjejejejje-ojojoojoiamsantaklaus3" shortname = "Esprite-PI-6" } client 10.128.255.17 { require_message_authenticator = no secret = "agatotIjejejejejejjejejejjejejejje-ojojoojoiamsantaklaus3" shortname = "Esprite-PI-7" } client 10.128.255.60 { require_message_authenticator = no secret = "agatotIjejejejejejjejejejjejejejje-ojojoojoiamsantaklaus3" shortname = "Esprite-Biblioteca-PB" } client 10.128.255.61 { require_message_authenticator = no secret = "agatotIjejejejejejjejejejjejejejje-ojojoojoiamsantaklaus3" shortname = "Esprite-Biblioteca-I" } client 10.128.255.80 { require_message_authenticator = no secret = "agatotIjejejejejejjejejejjejejejje-ojojoojoiamsantaklaus398952" shortname = "Esprite-PVIII-PB" } client 10.128.255.189 { require_message_authenticator = no secret = "agatotijejejejejejjejejejjejejejje-Black-58" shortname = "oficina" } client 10.128.255.81 { require_message_authenticator = no secret = "agatotIjejejejejejjejejejjejejejje-ojojoojoiamsantaklaus398952" shortname = "Esprite-PVIII-I" } client 10.128.255.82 { require_message_authenticator = no secret = "agatotIjejejejejejjejejejjejejejje-ojojoojoiamsantaklaus398952" shortname = "Esprite-PVIII-II" } client 10.128.255.83 { require_message_authenticator = no secret = "agatotIjejejejejejjejejejjejejejje-ojojoojoiamsantaklaus398952" shortname = "Esprite-PVIII-III" } client 10.128.255.84 { require_message_authenticator = no secret = "agatotIjejejejejejjejejejjejejejje-ojojoojoiamsantaklaus398952" shortname = "Esprite-PVIII-IV" } client 10.128.255.85 { require_message_authenticator = no secret = "agatotIjejejejejejjejejejjejejejje-ojojoojoiamsantaklaus398952" shortname = "Esprite-PVIII-V" } client 10.128.255.86 { require_message_authenticator = no secret = "agatotIjejejejejejjejejejjejejejje-ojojoojoiamsantaklaus398952" shortname = "Esprite-PVIII-VI" } client 10.128.255.87 { require_message_authenticator = no secret = "agatotIjejejejejejjejejejjejejejje-ojojoojoiamsantaklaus398952" shortname = "Esprite-PVIII-VII" } client 10.128.255.89 { require_message_authenticator = no secret = "agatotIjejejejejejjejejejjejejejje-ojojoojoiamsantaklaus3" shortname = "Esprite-PVIII-IX" } client 20.3.148.53 { require_message_authenticator = no secret = "agatotijejejejejejjejejejjejejejje-Green-22" shortname = "Jean_Jeaures" } client 190.53.80.1 { require_message_authenticator = no secret = "agatotIjejejejejejjejejejjejejejje-black-54" shortname = "Larrea" } client 201.216.227.201 { require_message_authenticator = no secret = "agatotIjejejejejejjejejejjejejejje-blue-246692" shortname = "Catalinas" } client 11.22.33.87 { require_message_authenticator = no secret = "agatotIjejejejejejjejejejjejejejje-ojojoojoiamsantaklaus3" shortname = "Esprite-Ecuador" } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating expr Module: Linked to module rlm_expiration Module: Instantiating expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server inner-tunnel { modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating pap pap { encryption_scheme = "auto" auto_header = yes } Module: Linked to module rlm_chap Module: Instantiating chap Module: Linked to module rlm_mschap Module: Instantiating mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no } Module: Linked to module rlm_unix Module: Instantiating unix unix { radwtmp = "/usr/local/var/log/radius/radwtmp" } Module: Linked to module rlm_ldap Module: Instantiating ldap ldap { server = "ldap.palermo.edu" port = 636 password = "dontbotherme" identity = "cn=cadorna,ou=applications,dc=palermo,dc=edu" net_timeout = 1 timeout = 4 timelimit = 3 tls_mode = no start_tls = no tls_require_cert = "allow" tls { start_tls = no cacertfile = "/etc/raddb/cacert.pem" randfile = "/dev/urandom" require_cert = "demand" } basedn = "ou=people,dc=palermo,dc=edu" filter = "(uid=%{Stripped-User-Name:-%{User-Name}})" base_filter = "(objectclass=radiusprofile)" auto_header = no access_attr = "radiusAllowed" access_attr_used_for_allow = yes groupname_attribute = "cn" groupmembership_filter = "(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass= GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))" dictionary_mapping = "/usr/local/etc/raddb/ldap.attrmap" ldap_debug = 0 ldap_connections_number = 5 compare_check_items = no do_xlat = yes set_auth_type = yes } rlm_ldap: Registering ldap_groupcmp for Ldap-Group rlm_ldap: Registering ldap_xlat with xlat_name ldap rlm_ldap: reading ldap<->radius mappings from file /usr/local/etc/raddb/ldap.attrmap rlm_ldap: LDAP radiusPassword mapped to RADIUS Cleartext-Password conns: 0x9f3d90 Module: Linked to module rlm_eap Module: Instantiating eap eap { default_eap_type = "ttls" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 2048 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 pem_file_type = yes private_key_file = "/etc/pki/tls/certs/ips-pleasestop-key.pem" certificate_file = "/etc/pki/tls/certs/ips-pleasestop-crt.pem" CA_file = "/etc/pki/tls/certs/ips-ca-bundle.crt" dh_file = "/etc/raddb/certs/dh" random_file = "/etc/raddb/certs/random" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" cache { enable = yes lifetime = 6 max_entries = 255 } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel-peap" } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating suffix realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating files files { usersfile = "/usr/local/etc/raddb/users" acctusersfile = "/usr/local/etc/raddb/acct_users" preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users" compat = "no" } Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating radutmp radutmp { filename = "/usr/local/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating attr_filter.access_reject attr_filter attr_filter.access_reject { attrsfile = "/usr/local/etc/raddb/attrs.access_reject" key = "%{User-Name}" } } } server inner-tunnel-peap { modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } } modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating preprocess preprocess { huntgroups = "/usr/local/etc/raddb/huntgroups" hints = "/usr/local/etc/raddb/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Linked to module rlm_detail Module: Instantiating auth_log detail auth_log { detailfile = "/usr/local/var/log/radius/radacct/requests/%{Client-IP-Address}/auth-detail-%{% {Virtual-Server}:-DEFAULT}-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Instantiating detail detail { detailfile = "/usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Instantiating attr_filter.accounting_response attr_filter attr_filter.accounting_response { attrsfile = "/usr/local/etc/raddb/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = 111.222.333.5 port = 0 } listen { type = "acct" ipaddr = 111.222.333.5 port = 0 } Listening on authentication address 111.222.333.5 port 1812 Listening on accounting address 111.222.333.5 port 1813 Ready to process requests. Thanks in advance! -- -- Open Kairos http://www.openkairos.com Watch More TV http://sebelk.blogspot.com Sergio Belkin -

1 0

Regular Expression Syntax Error: Invalid regex in realm
by Gökhan Eryol 10 Nov '08

10 Nov '08

Hi all, I'm trying to use regular expressions as realm names in the proxy.conf file. There is an example and explanation of writing regular expression as a realm name in the proxy.conf file. However it is not working even if I write down the given example. Radius startup breaks up with the error message: Invalid regex in realm "~*\.example\.com$" My proxy.conf file is look like: .. .. .. realm "~*\\.example\\.com$" { authhost = LOCAL # not strictly necessary accthost = LOCAL # not strictly necessary } realm DEFAULT { .. .. .. and the output is as follows: ~# radiusd -X FreeRADIUS Version 2.1.1, for host i686-pc-linux-gnu, built on Nov 3 2008 at 16:11:36 Copyright (C) 1999-2008 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... .. .. .. realm ~*\.example\.com$ { /usr/local/etc/raddb/proxy.conf[485]: Invalid regex in realm "~*\.example\.com$" } # realm ~*\.example\.com$ eryol:~# What is the syntax for writing regular expressions as realm names for Freeradius 2.1.1 ? Has the update of explanations in proxy.conf file forgotten or my configuration contains any error? Thanks for your help. Best regards, Gokhan Eryol

1 0

Re: Logging CDRs into MySQL
by prabhu s sugumaran 08 Nov '08

08 Nov '08

Ivan, Thanks for your response. FreeRadisu is able to connect to the MySQL database and write into the radacct table. However I am not ablle to set things up for logging the VSA attributes into the database. How to edit the dialup.conf for the VSA value logging. I edited the dialup.conf with the inset query for the VSAs as follows: accounting_start_query = " \ INSERT INTO ${acct_table1} \ (IPC_SESSION_ID, IPC_SERVICE_TYPE, IPC_SESSION_SEQUENCE_NUM, \ IPC_POS_TRANSPORT_PROTOCOL, IPC_POS_TRANSPORT_PORT, IPC_POS_TRANSPORT_IP, \ ....... VALUES \ ('%{IPC-Session-Id}', '%{IPC-Service-Type}', \ '%{IPC-Session-Sequence-Num}', \ '%{IPC-Pos-Transport-Protocol}', '%{IPC-Pos-Transport-Port}', '%{IPC-Pos-Transport-IP}', \ ...... I removes all other queries fom the dialup.conf and just have the above one but to no avail. Please suggest. Regards, Prabhu On Thu, 06 Nov 2008 prabhu s sugumaran wrote : > > >Hi, > >I am facing difficulties in integrating MySQL and FreeRadius for the accounting. I have setup the mysql with a database named 'radius'. I have also defined a table 'rt_cdr1' which is to be used to store the CDRs that come in the accounting request. I add the following statements in radiusd.conf. > >----------- > >accounting{ >detail >sql >} >------ > >Also in the mysql.conf I have the following : > >acct_table1="rt_cdr1" >acct_table2="rt_cdr1" > >Is their any other configurations that needs to be done to make the free radius pump the accounting request into databas?..I serarched to no avail . > >The following is the output of 'radiusd -X -f' : > > > >ot@electron freeradius]# >[root@electron freeradius]# /usr/local/sbin/radiusd -X -f >FreeRADIUS Version 2.1.1, for host i686-pc-linux-gnu, built on Nov 5 2008 at 14:56:50 >Copyright (C) 1999-2008 The FreeRADIUS server project and contributors. >There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A >PARTICULAR PURPOSE. >You may redistribute copies of FreeRADIUS under the terms of the >GNU General Public License v2. >Starting - reading configuration files ... >including configuration file /usr/local/etc/raddb/radiusd.conf >including configuration file /usr/local/etc/raddb/proxy.conf >including configuration file /usr/local/etc/raddb/clients.conf >including files in directory /usr/local/etc/raddb/modules/ >including configuration file /usr/local/etc/raddb/modules/wimax >including configuration file /usr/local/etc/raddb/modules/detail.example.com >including configuration file /usr/local/etc/raddb/modules/radutmp >including configuration file /usr/local/etc/raddb/modules/etc_group >including configuration file /usr/local/etc/raddb/modules/chap >including configuration file /usr/local/etc/raddb/modules/attr_rewrite >including configuration file /usr/local/etc/raddb/modules/mac2ip >including configuration file /usr/local/etc/raddb/modules/inner-eap >including configuration file /usr/local/etc/raddb/modules/ippool >including configuration file /usr/local/etc/raddb/modules/logintime >including configuration file /usr/local/etc/raddb/modules/attr_filter >including configuration file /usr/local/etc/raddb/modules/counter >including configuration file /usr/local/etc/raddb/modules/digest >including configuration file /usr/local/etc/raddb/modules/always >including configuration file /usr/local/etc/raddb/modules/smbpasswd >including configuration file /usr/local/etc/raddb/modules/checkval >including configuration file /usr/local/etc/raddb/modules/passwd >including configuration file /usr/local/etc/raddb/modules/sradutmp >including configuration file /usr/local/etc/raddb/modules/krb5 >including configuration file /usr/local/etc/raddb/modules/mschap >including configuration file /usr/local/etc/raddb/modules/detail.log >including configuration file /usr/local/etc/raddb/modules/linelog >including configuration file /usr/local/etc/raddb/modules/preprocess >including configuration file /usr/local/etc/raddb/modules/detail >including configuration file /usr/local/etc/raddb/modules/realm >including configuration file /usr/local/etc/raddb/modules/expr >including configuration file /usr/local/etc/raddb/modules/ldap >including configuration file /usr/local/etc/raddb/modules/files >including configuration file /usr/local/etc/raddb/modules/acct_unique >including configuration file /usr/local/etc/raddb/modules/echo >including configuration file /usr/local/etc/raddb/modules/sql_log >including configuration file /usr/local/etc/raddb/modules/mac2vlan >including configuration file /usr/local/etc/raddb/modules/pap >including configuration file /usr/local/etc/raddb/modules/policy >including configuration file /usr/local/etc/raddb/modules/unix >including configuration file /usr/local/etc/raddb/modules/pam >including configuration file /usr/local/etc/raddb/modules/exec >including configuration file /usr/local/etc/raddb/modules/expiration >including configuration file /usr/local/etc/raddb/eap.conf >including configuration file /usr/local/etc/raddb/sql.conf >including configuration file /usr/local/etc/raddb/sql/mysql/dialup.conf >including configuration file /usr/local/etc/raddb/sql/mysql/counter.conf >including configuration file /usr/local/etc/raddb/policy.conf >including files in directory /usr/local/etc/raddb/sites-enabled/ >including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel >including configuration file /usr/local/etc/raddb/sites-enabled/default >including dictionary file /usr/local/etc/raddb/dictionary >main { > prefix = "/usr/local" > localstatedir = "/usr/local/var" > logdir = "/usr/local/var/log/radius" > libdir = "/usr/local/lib" > radacctdir = "/usr/local/var/log/radius/radacct" > hostname_lookups = no > max_request_time = 30 > cleanup_delay = 5 > max_requests = 1024 > allow_core_dumps = no > pidfile = "/usr/local/var/run/radiusd/radiusd.pid" > checkrad = "/usr/local/sbin/checkrad" > debug_level = 0 > proxy_requests = yes > log { > stripped_names = no > auth = no > auth_badpass = no > auth_goodpass = no > } > security { > max_attributes = 200 > reject_delay = 1 > status_server = yes > } >} > client localhost { > ipaddr = 127.0.0.1 > require_message_authenticator = no > secret = "testing123" > nastype = "other" > } > client 192.168.72.32 { > require_message_authenticator = no > secret = "secret" > } >radiusd: #### Loading Realms and Home Servers #### > proxy server { > retry_delay = 5 > retry_count = 3 > default_fallback = no > dead_time = 120 > wake_all_if_all_dead = no > } > home_server localhost { > ipaddr = 127.0.0.1 > port = 1812 > type = "auth" > secret = "testing123" > response_window = 20 > max_outstanding = 65536 > zombie_period = 40 > status_check = "status-server" > ping_interval = 30 > check_interval = 30 > num_answers_to_alive = 3 > num_pings_to_alive = 3 > revive_interval = 120 > status_check_timeout = 4 > } > home_server_pool my_auth_failover { > type = fail-over > home_server = localhost > } > realm example.com { > auth_pool = my_auth_failover > } > realm LOCAL { > } >radiusd: #### Instantiating modules #### > instantiate { > Module: Linked to module rlm_exec > Module: Instantiating exec > exec { > wait = no > input_pairs = "request" > shell_escape = yes > } > Module: Linked to module rlm_expr > Module: Instantiating expr > Module: Linked to module rlm_expiration > Module: Instantiating expiration > expiration { > reply-message = "Password Has Expired " > } > Module: Linked to module rlm_logintime > Module: Instantiating logintime > logintime { > reply-message = "You are calling outside your allowed timespan " > minimum-timeout = 60 > } > } >radiusd: #### Loading Virtual Servers #### >server inner-tunnel { > modules { > Module: Checking authenticate {...} for more modules to load > Module: Linked to module rlm_pap > Module: Instantiating pap > pap { > encryption_scheme = "auto" > auto_header = no > } > Module: Linked to module rlm_chap > Module: Instantiating chap > Module: Linked to module rlm_mschap > Module: Instantiating mschap > mschap { > use_mppe = yes > require_encryption = no > require_strong = no > with_ntdomain_hack = no > } > Module: Linked to module rlm_unix > Module: Instantiating unix > unix { > radwtmp = "/usr/local/var/log/radius/radwtmp" > } > Module: Linked to module rlm_eap > Module: Instantiating eap > eap { > default_eap_type = "md5" > timer_expire = 60 > ignore_unknown_eap_types = no > cisco_accounting_username_bug = no > max_sessions = 2048 > } > Module: Linked to sub-module rlm_eap_md5 > Module: Instantiating eap-md5 > Module: Linked to sub-module rlm_eap_leap > Module: Instantiating eap-leap > Module: Linked to sub-module rlm_eap_gtc > Module: Instantiating eap-gtc > gtc { > challenge = "Password: " > auth_type = "PAP" > } > Module: Linked to sub-module rlm_eap_tls > Module: Instantiating eap-tls > tls { > rsa_key_exchange = no > dh_key_exchange = yes > rsa_key_length = 512 > dh_key_length = 512 > verify_depth = 0 > pem_file_type = yes > private_key_file = "/usr/local/etc/raddb/certs/server.pem" > certificate_file = "/usr/local/etc/raddb/certs/server.pem" > CA_file = "/usr/local/etc/raddb/certs/ca.pem" > private_key_password = "whatever" > dh_file = "/usr/local/etc/raddb/certs/dh" > random_file = "/usr/local/etc/raddb/certs/random" > fragment_size = 1024 > include_length = yes > check_crl = no > cipher_list = "DEFAULT" > make_cert_command = "/usr/local/etc/raddb/certs/bootstrap" > cache { > enable = no > lifetime = 24 > max_entries = 255 > } > } > Module: Linked to sub-module rlm_eap_ttls > Module: Instantiating eap-ttls > ttls { > default_eap_type = "md5" > copy_request_to_tunnel = no > use_tunneled_reply = no > virtual_server = "inner-tunnel" > } > Module: Linked to sub-module rlm_eap_peap > Module: Instantiating eap-peap > peap { > default_eap_type = "mschapv2" > copy_request_to_tunnel = no > use_tunneled_reply = no > proxy_tunneled_request_as_eap = yes > virtual_server = "inner-tunnel" > } > Module: Linked to sub-module rlm_eap_mschapv2 > Module: Instantiating eap-mschapv2 > mschapv2 { > with_ntdomain_hack = no > } > Module: Checking authorize {...} for more modules to load > Module: Linked to module rlm_realm > Module: Instantiating suffix > realm suffix { > format = "suffix" > delimiter = "@" > ignore_default = no > ignore_null = no > } > Module: Linked to module rlm_files > Module: Instantiating files > files { > usersfile = "/usr/local/etc/raddb/users" > acctusersfile = "/usr/local/etc/raddb/acct_users" > preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users" > compat = "no" > } > Module: Checking session {...} for more modules to load > Module: Linked to module rlm_radutmp > Module: Instantiating radutmp > radutmp { > filename = "/usr/local/var/log/radius/radutmp" > username = "%{User-Name}" > case_sensitive = yes > check_with_nas = yes > perm = 384 > callerid = yes > } > Module: Checking post-proxy {...} for more modules to load > Module: Checking post-auth {...} for more modules to load > Module: Linked to module rlm_attr_filter > Module: Instantiating attr_filter.access_reject > attr_filter attr_filter.access_reject { > attrsfile = "/usr/local/etc/raddb/attrs.access_reject" > key = "%{User-Name}" > } > } >} > modules { > Module: Checking authenticate {...} for more modules to load > Module: Checking authorize {...} for more modules to load > Module: Linked to module rlm_preprocess > Module: Instantiating preprocess > preprocess { > huntgroups = "/usr/local/etc/raddb/huntgroups" > hints = "/usr/local/etc/raddb/hints" > with_ascend_hack = no > ascend_channels_per_line = 23 > with_ntdomain_hack = no > with_specialix_jetstream_hack = no > with_cisco_vsa_hack = no > with_alvarion_vsa_hack = no > } > Module: Checking preacct {...} for more modules to load > Module: Linked to module rlm_acct_unique > Module: Instantiating acct_unique > acct_unique { > key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" > } > Module: Checking accounting {...} for more modules to load > Module: Linked to module rlm_detail > Module: Instantiating detail > detail { > detailfile = "/usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" > header = "%t" > detailperm = 384 > dirperm = 493 > locking = no > log_packet_header = no > } > Module: Instantiating attr_filter.accounting_response > attr_filter attr_filter.accounting_response { > attrsfile = "/usr/local/etc/raddb/attrs.accounting_response" > key = "%{User-Name}" > } > Module: Checking session {...} for more modules to load > Module: Checking post-proxy {...} for more modules to load > Module: Checking post-auth {...} for more modules to load > } >radiusd: #### Opening IP addresses and Ports #### >listen { > type = "auth" > ipaddr = * > port = 0 > clients = "per_socket_clients" > client 192.168.72.32 { > require_message_authenticator = no > secret = "secret" > } >} >listen { > type = "acct" > ipaddr = * > port = 0 >} >Listening on authentication address * port 1812 >Listening on accounting address * port 1813 >Listening on proxy address * port 1814 >Ready to process requests. > rad_recv: Accounting-Request packet from host 192.168.72.32 port 50000, id=38, length=774 > User-Name = "192.168.72.32" > NAS-IP-Address = 192.168.72.32 > Acct-Status-Type = Stop > Acct-Session-Id = "61505" > NAS-Port-Type = Async > NAS-Port = 1504 > Calling-Station-Id = "192.168.76.17" > Called-Station-Id = "172.27.247.80\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000" > IPC-Session-Id = 0x0000000000000000 > IPC-Service-Type = 0 > IPC-Session-Sequence-Num = 1504 > IPC-Pos-Transport-Protocol = 0 > IPC-Pos-Transport-Port = 51235 > IPC-Pos-Transport-IP = 192.168.76.17 > IPC-Pos-Transport-DNS = "192.168.76.17" > IPC-Ingress-Transport-Protocol = 0 > IPC-Ingress-Transport-Port = 4444 > IPC-Ingress-Transport-IP = 192.168.72.32 > IPC-Ingress-Transport-DNS = "192.168.72.32" > IPC-Host-Transport-Protocol = 0 > IPC-Host-Transport-Port = 8045 > IPC-Host-Transport-IP = 172.27.247.80 > IPC-Host-Transport-DNS = "172.27.247.80" > IPC-Ingress-Interface-Number = 0 > IPC-Transaction-Identifier = "be3521eaac1bf659" > IPC-Transaction-Protocol-Type = 2 > IPC-Visa-Transaction-Mode = 0 > IPC-Security-Protocol = 0 > IPC-Call-Start-Ingress-Sec = 1225958119 > IPC-Call-Start-Ingress-Msec = 680 > IPC-Call-Connect-Ingress-Sec = 1225958119 > IPC-Call-Connect-Ingress-Msec = 680 > IPC-Call-Hs-Comp-Time-Sec = 1225958119 > IPC-Call-Hs-Comp-Time-Msec = 680 > IPC-Call-End-Time-Sec = 1225958119 > IPC-Call-End-Time-Msec = 730 > IPC-Call-Durn-Connect-Disc = 0 > IPC-Call-Termination-Cause = 256 > IPC-Response-Time-Host = 0 > IPC-Transaction-Bytes-Sent-POS = 14 > IPC-Transaction-Bytes-Sent-Host = 9 > IPC-Transaction-Bytes-Received-POS = 9 > IPC-Transaction-Bytes-Received-Host = 12 > IPC-Transaction-Bytes-Lost = 0 > IPC-Duplicate-Transactions = 0 > IPC-Re-Transmission-Pos = 0 > IPC-Re-Transmission-Host = 0 > IPC-NTP-Timezone = "GMT" > USR-Attr-33068 = 0x00000000 >+- entering group preacct {...} >++[preprocess] returns ok >[acct_unique] Hashing 'NAS-Port = 1504,Client-IP-Address = 192.168.72.32,NAS-IP-Address = 192.168.72.32,Acct-Session-Id = "61505",User-Name = "192.168.72.32"' >[acct_unique] Acct-Unique-Session-ID = "b38696cc273b57fb". >++[acct_unique] returns ok >[suffix] No '@' in User-Name = "192.168.72.32", looking up realm NULL >[suffix] No such realm "NULL" >++[suffix] returns noop >++[files] returns noop >+- entering group accounting {...} >[detail] expand: /usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d -> /usr/local/var/log/radius/radacct/192.168.72.32/detail-20081106 >[detail] /usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d expands to /usr/local/var/log/radius/radacct/192.168.72.32/detail-20081106 >[detail] expand: %t -> Thu Nov 6 19:26:25 2008 >++[detail] returns ok >++[unix] returns ok >[radutmp] expand: /usr/local/var/log/radius/radutmp -> /usr/local/var/log/radius/radutmp >[radutmp] expand: %{User-Name} -> 192.168.72.32 >rlm_radutmp: Logout for NAS 192.168.72.32 port 1504, but no Login record >++[radutmp] returns ok >[attr_filter.accounting_response] expand: %{User-Name} -> 192.168.72.32 > attr_filter: Matched entry DEFAULT at line 12 >++[attr_filter.accounting_response] returns updated >Sending Accounting-Response of id 38 to 192.168.72.32 port 50000 >Finished request 0. >Cleaning up request 0 ID 38 with timestamp +10 >Going to the next request >Ready to process requests. > > > >Please suggest. > >Thanks, >Prabhu >

1 0

adding items in server reply
by milk55 07 Nov '08

07 Nov '08

hi, I install freeradius server to authenticate user through edirectory. Now i would like radius to send groups the user is member when replying the NAS. how can i do so? thank for your help regards -- View this message in context: http://www.nabble.com/adding-items-in-server-reply-tp20378305p20378305.html Sent from the FreeRadius - User mailing list archive at Nabble.com.

2 3

FreeRadius 2.1.1 with PEAP- EAP-MD5
by Queenie de Melo 07 Nov '08

07 Nov '08

Hi All, I have been trying to configure PEAP with EAP -MD5 but i juat cannot get it to work. TTLS with EAP -MD5 workes fine. Also PEAP with Token card(gtc) and MSCHAPv2 works fine. What I tried is... 1. When I *comment out MSCHAPv2* in the eap.conf file and I try with the client being in PEAP EAP-MSCHAPv2, then I get a REJECT as below. 2.When I *comment out MD5* in the eap.conf file and try with the client being in PEAP EAP MD5, then I get the same REJECT message as below 3. When *I dont comment out MD5(MD5 is enabled)* in the eap.conf file and try with the client being in PEAP EAP MD5, then I get the same REJECT message as below In all the above three cases, I seem to be getting the same Reject message as below: ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "queenie", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 9 length 72 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Received EAP-TLV response. [peap] Had sent TLV failure. User was rejected earlier in this session. [eap] Handler failed in EAP/peap [eap] Failed in EAP select ++[eap] returns invalid Failed to authenticate the user. Using Post-Auth-Type Reject +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> queenie attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 8 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 8 Sending Access-Reject of id 9 to 192.168.5.200 port 1024 EAP-Message = 0x04090004 Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.5 seconds. Cleaning up request 0 ID 1 with timestamp +79 Cleaning up request 1 ID 2 with timestamp +79 Cleaning up request 2 ID 3 with timestamp +79 Cleaning up request 3 ID 4 with timestamp +79 Waking up in 0.2 seconds. Cleaning up request 4 ID 5 with timestamp +79 Cleaning up request 5 ID 6 with timestamp +79 Cleaning up request 6 ID 7 with timestamp +79 Cleaning up request 7 ID 8 with timestamp +79 Waking up in 1.0 seconds. Cleaning up request 8 ID 9 with timestamp +79 Ready to process requests. *Is it possible that in the eap.conf file, the MD5 does not get enabled under PEAP? Cause MD5 does work fine with TTLS for me. * Pl help! Regards, Queenie

2 5

radiusd -x gives error "Could not link driver rlm_sql_mysql: rlm_sql_mysql.so: cannot open shared object file: No such file or directory"
by hsuan 07 Nov '08

07 Nov '08

Hi all : I have install freeradius-server-2.1.1 and mysql using "yum -y install mysql-server mysql-devel". But when I start the radius server using radiusd -x I get the following message : Could not link driver rlm_sql_mysql: rlm_sql_mysql.so: cannot open shared object file: No such file or directory Make sure it (and all its dependent libraries!) are in the search path of your system's ld. /usr/local/etc/raddb/sql.conf[22]: Instantiation failed for module "sql" /usr/local/etc/raddb/sites-enabled/default[152]: Failed to find module "sql". /usr/local/etc/raddb/sites-enabled/default[62]: Errors parsing authorize section . } Errors initializing modules What's the problem ? How can I to solve the problem ? Thanks for any help Regards Vicky

2 1

variable expansion of check item in users file
by Alexandre Chapellon 06 Nov '08

06 Nov '08

Hello, I have several accounts stored in users files for which i have set set the Pool-Name controll attribute based on the Huntgoup-Name. So i tried something like this: account1 Cleartext-Password := "passwd1", Pool-Name := "%{Huntgroup-Name}_suffix" Unfortunatly the expansion of the variable doesn't happen and all i get is '=25=7BHuntgroup-Name=7D_suffix' If i put exactly the same thing in the reply item expansion is done correctly... account1 Cleartext-Password := "passwd1" IP-Address-Pool-Name := "%{Huntgroup-Name}_suffix" Is it a normal behaviour? How else can I achieve it (I would appreciate not to duplicate users entries for each of my huntgroup!)?

3 7

FreeRadius and MySql custom attributes
by Aaron Seibert 06 Nov '08

06 Nov '08

Hello, I work in the NOC of an isp. Currently we have VIRCOM Radius servers set up to authenticate against a MySql server cluster, but we'd like to switch to FreeRadius. There is a profiles column that contains a few different service definitions (slip for SlipStream, newsgroups, a combo slip-news, etc.) What I can't figure out how to do is have the Radius server evaluate that column for the authenticated user, and send a reply so that the client knows that the user is authenticated for that specific service. Currently, I'm just trying to get the slip service to work. I have created a dictionary.slipstream file with the following: VENDOR Slipstream 7000 ATTRIBUTE SlipStream-Auth True string Slipstream However, that will not authenticate the slip client. If I "hardcode" the attribute into the auth_reply query, the client is then authenticated. (Query = authorize_reply_query = "SELECT '','Slipstream-Auth','true',':-' FROM radius_auth WHERE Username = '%{SQL-User-Name}'" Any ideas where to go to get this working correctly?

5 12