- Freeradius-Users - lists.freeradius.org

PB with Accent in nspmPassword in request LDAP between FREE-RADIUS 1.0.5 (suse) and edirectory novell 6.5
by freeradius＠rockwellcollins.com 18 May '06

18 May '06

Hello, I set up a solution implementing eap-PEAP user authentication and VLAN assignment with · : - FREE-RADIUS 1.0.5 on suse - ENTERASYS Switch - Edirectory Novell 6.5 This solution is operational. On the other hand, if the user uses a password using characters with accents, this solution does not work. I identified the problem in the LDAP request (ask nspmPassword) between FREE-RADIUS 1.0.5 and the edirectory of novell 6.5. The problem seems to come from FreeRadius server because edirectory answers correctly with my test tool " LDAPBrowser ". Do you have met this problem? Have you a solution to propose to me? thank you in advance. Best regards Stephan

2 6

max_requests
by Giuseppe Parlato 18 May '06

18 May '06

value max_requests now is 1024, as default value is I think, but 4 clients isn't it too low? if I want to change it then do I have to just change and restart freeradius to make it working? Giuseppe

1 0

freeradius with TTLS - MSCHAPV2 authentication
by sumi thra 18 May '06

18 May '06

Hey All, Im using the D-Link client card with the odyssey client manager. Im trying to connect to the wlan configured with 802.1x authetication & the radius server used for authetication is freeradius-1.1.1 . Eap-Type : TTLS Auth-Type : MS-CHAPV2 When the MU sends an access request, the radius server replies back with the Access-Reject code ( 3 ). Im not able to figure out what the problem is.. ?? Does the freeradius support this eap & auth types ?? Note : Im using the default eap.conf file with smaller changes. Like default eap type is changed to TTLS. And default auth type for TTLS is mschapv2. Please let me know if you have any idea. Thanks Sumi

1 0

How make the conference in softphones
by raviprakash sunkara 18 May '06

18 May '06

Hello EveryBody , I need help from U. please help me in How make a conference in softphones. On Which modules have work. I recently install tested the softphones . that a calls are made . And When I looked into Location table . in that table records are insert. immediately when the system restart or when softphone is discarded the " location table " records are disable. Please help me in that.. And please Excuse me, In my English . Bye -- Thanks and Regards with cheers Sunkara Ravi Prakash (Voip Developer) Hyperion Technology www.hyperion-tech.com

1 0

Cisco and RADIUS
by vignesh 18 May '06

18 May '06

Hello all I am new to RADIUS. I am using Cisco IP IP gw as NAS and RADIUS. I have few doubts regarding the interaction between CISCO and RADIUS Whenever the request for authentication comes, for all authenticated users I wish to send some extra details like Billing model, credit time etc. If I make changes in the authentication query to return these values, how will the nas understand that which one is billing model or which one is credit time. Do I have to make any changes in the Dictionary or RADIUS. I tried to search for the same in CISCO site but hard luck couldn't find it. Please guys help me out Thanks in advance Vignesh

3 2

How can I account with Freeradius using mysql DB for Asterisk?
by fangh 18 May '06

18 May '06

freeradius-users，您好！ I'm a beginner with freeradius.I've got a problem,please help me, thanks a lot! I'd seen the document <Call Detail Recording to RADIUS Server> and the document <cdrdrivers.txt>. In the cdrdrivers.txt said that :" > RADIUS: The Radius CDR driver built upon the radiusclient-ng library > available at > http://developer.berlios.de/projects/radiusclient-ng/ > > Installing this library will provide the RADIUS client > function to Asterisk, and thus make it able to talk to > a RADIUS server. > > The CDR driver produces only 'stop' records. > > Compile, configure, and install the latest > radiusclient-ng library: > tar -zxvf radiusclient-ng-0.5.2.tar.gz && > cd radiusclient-ng-0.5.2 && > ./configure && > make && > make install > > Compile, or recompile Asterisk so that it will now add support > for the module: > make clean && > make update && > make && > make install > > Configure the /usr/local/etc/radiusclient-ng/servers > file to set the RADIUS server's IP address and secret. > Include the dictionary.asterisk file in the main > dictionary: > cp -p asterisk.dictionary /usr/local/etc/radiusclient-ng/ > cd /usr/local/etc/radiusclient-ng/ > echo '$INCLUDE /usr/local/etc/radiusclient-ng/asterisk.dictionary' >> dictionary > > The dictionary.asterisk file must also be included in > the RADIUS server's main dictionary file in a similar > manner. " I did things like that above,but after I recompile Asterisk and restart Asterisk Server,when I made a call,the radius server couldn't receive request messages. I also can not find dictionary.asterisk file after I recompile asterisk,why?And how can I get the dictionary.asterisk,what should I do? I'd configure the radius configurations,the files radiusd.conf,clients.conf,sql.conf in raddb directory at Freeradius server side,the files servers,radiusclient.conf at the radiusclient side. the detail configurations just like in <Call Detail Recording to RADIUS Server> doc said. 　　　　　　　　致礼！　　　　　　　　fangh 　　　　　　　　fghai(a)126.com 　　　　　　　　　　2006-05-18

1 0

How can I account with Freeradius using mysql DB?
by fangh 18 May '06

18 May '06

freeradius-users， I'm a beginner with freeradius.I've got a problem,please help me, thanks a lot! I'd seen the document <Call Detail Recording to RADIUS Server> and the document <cdrdrivers.txt>. In the cdrdrivers.txt said that :" > RADIUS: The Radius CDR driver built upon the radiusclient-ng library > available at > http://developer.berlios.de/projects/radiusclient-ng/ > > Installing this library will provide the RADIUS client > function to Asterisk, and thus make it able to talk to > a RADIUS server. > > The CDR driver produces only 'stop' records. > > Compile, configure, and install the latest > radiusclient-ng library: > tar -zxvf radiusclient-ng-0.5.2.tar.gz && > cd radiusclient-ng-0.5.2 && > ./configure && > make && > make install > > Compile, or recompile Asterisk so that it will now add support > for the module: > make clean && > make update && > make && > make install > > Configure the /usr/local/etc/radiusclient-ng/servers > file to set the RADIUS server's IP address and secret. > Include the dictionary.asterisk file in the main > dictionary: > cp -p asterisk.dictionary /usr/local/etc/radiusclient-ng/ > cd /usr/local/etc/radiusclient-ng/ > echo '$INCLUDE /usr/local/etc/radiusclient-ng/asterisk.dictionary' >> dictionary > > The dictionary.asterisk file must also be included in > the RADIUS server's main dictionary file in a similar > manner. " I did things like that above,but after I recompile Asterisk and restart Asterisk Server,when I made a call,the radius server couldn't receive request messages. I also can not find dictionary.asterisk file after I recompile asterisk,why?And how can I get the dictionary.asterisk,what should I do? I'd configure the radius configurations,the files radiusd.conf,clients.conf,sql.conf in raddb directory at Freeradius server side,the files servers,radiusclient.conf at the radiusclient side. the detail configurations just like in <Call Detail Recording to RADIUS Server> doc said. 　　　　　　　　致礼！　　　　　　　　fangh 　　　　　　　　fghai(a)126.com 　　　　　　　　　　2006-05-18

1 0

peap with mysql
by Chris Liles 17 May '06

17 May '06

To get peap working with a mysql backend do I need to store the LM and NT hashes of the password? I currently have my db setup like this: mysql> select * from radcheck; +----+----------+---------------+----+--------+ | id | UserName | Attribute | op | Value | +----+----------+---------------+----+--------+ | 1 | temptest | User-Password | == | authme | +----+----------+---------------+----+--------+ 1 row in set (0.00 sec) I would guess I need to add 2 more rows per user with the attributes LM-Password and NT-Password set to the correct hash. Currently it works fine with NTRadPing, but not from the MS Supplicant :( The only reason I ask about the LM and NT Hashes is because I saw some info about that when using openldap. Thanks! -- Chris Liles System Analyst Air2Web, Inc. 1230 Peachtree St. N.E. 12th Floor Atlanta, GA 30309

2 1

when next release with rlm_sqlippool as stable?
by RobertB 17 May '06

17 May '06

Hi Any ideas? I'm using the current snapshot in the lab, but it's not stable, which of course is an understanding. Cheers, RobertB

1 0

Unstable FreeRadius
by Bill Schoolfield 17 May '06

17 May '06

Last week I reported an issue I had with FreeRadius 1.0.5 on Red Hat Enterprise Linux ES release 3. It had to do with dropped MySQL connections. We continue experience severe problems with FreeRadius. The server will run for upwards to 8 hours, sometimes more, before getting into some unknown state where it stops responding to requests. At this time FreeRadius consumes all the system's cpu cycles and won't stop without a kill -9. We are also running radrelay which relays to another port on the same server. The mysql database (version 4.0.26) is local to the server where FreeRadius resides. Please if you have any ideas or suggestions please pass them along. Otherwise we may be forced to fall back on another approach. I can happily send more detail if needed but there's potentially a lot and I didn't want to overwhelm the list... Thanks in advance for your ideas. From the log, here is the basic pattern: Many of these... Wed May 3 08:02:25 2006 : Info: rlm_sql (sql): There are no DB handles to use! skipped 0, tried to connect 0 then... Wed May 3 08:02:52 2006 : Error: rlm_sql_mysql: MYSQL Error: Cannot get result Wed May 3 08:02:52 2006 : Error: rlm_sql_mysql: MYSQL Error: Wed May 3 08:02:52 2006 : Error: rlm_sql_mysql: MYSQL Error: No Fields Wed May 3 08:02:52 2006 : Error: rlm_sql_mysql: MYSQL error: Wed May 3 08:02:52 2006 : Info: rlm_sql_mysql: Starting connect to MySQL server for #0 Wed May 3 08:02:52 2006 : Error: rlm_sql (sql): failed after re-connect or: Wed May 3 17:50:05 2006 : Info: rlm_sql_mysql: Starting connect to MySQL server for #4 Wed May 3 17:50:05 2006 : Error: rlm_sql_mysql: Couldn't connect socket to MySQL server radius@localhost:radius Wed May 3 17:50:05 2006 : Error: rlm_sql_mysql: Mysql error '' Wed May 3 17:50:05 2006 : Error: rlm_sql (sql): Failed to connect DB handle #4 Wed May 3 17:50:05 2006 : Error: rlm_sql (sql): reconnect failed, database down? Wed May 3 17:50:05 2006 : Error: rlm_sql (sql): Couldn't insert SQL accounting STOP record - rlm_sql_mysql: no connection to db or: Sat May 6 12:40:04 2006 : Error: rlm_sql (sql): failed after re-connect Sat May 6 12:40:04 2006 : Error: rlm_sql (sql): Couldn't update SQL accounting STOP record - Lost connection to MySQL server during query or: Sun May 7 18:20:41 2006 : Error: rlm_sql_mysql: MYSQL Error: Cannot get result Sun May 7 18:20:42 2006 : Error: rlm_sql_mysql: MYSQL Error: Sun May 7 18:20:42 2006 : Error: rlm_sql_mysql: MYSQL Error: No Fields Sun May 7 18:20:42 2006 : Error: rlm_sql_mysql: MYSQL error: Sun May 7 18:20:42 2006 : Info: rlm_sql_mysql: Starting connect to MySQL server for #8 Sun May 7 18:20:42 2006 : Error: rlm_sql (sql): failed after re-connect

4 6