- Freeradius-Users - lists.freeradius.org

RE: getting Freeradius to recorde login failure, etc
by Jamal Taweel 17 May '06

17 May '06

Yes it is possible. But you should define a proper data type for the field. -----Original Message----- From: freeradius-users-bounces+jamal.taweel=paltel.net(a)lists.freeradius.org [mailto:freeradius-users-bounces+jamal.taweel=paltel.net@lists.freeradiu s.org] On Behalf Of Jeremy ohara Sent: Wednesday, May 17, 2006 1:09 PM To: FreeRadius users mailing list Subject: RE: getting Freeradius to recorde login failure, etc Importance: High i wanted 2 other fields which are nasip and callerid does that sound possible? sorry i'm not very strong in the sql coding area Jeremy -----Original Message----- From: "Jamal Taweel" <jamal.taweel(a)paltel.net> To: "FreeRadius users mailing list" <freeradius-users(a)lists.freeradius.org> Date: Wed, 17 May 2006 13:36:59 +0200 Subject: RE: getting Freeradius to recorde login failure, etc You should write in PL/SQL the following: CREATE FUNCTION + the statements which they were sent. BR, -----Original Message----- From: freeradius-users-bounces+jamal.taweel=paltel.net(a)lists.freeradius.org [mailto:freeradius-users-bounces+jamal.taweel=paltel.net@lists.freeradiu s.org] On Behalf Of Jeremy ohara Sent: Wednesday, May 17, 2006 12:17 PM To: FreeRadius users mailing list Subject: RE: getting Freeradius to recorde login failure, etc Importance: High i done all but i'm lost where you have * Create a function in the database (called "fails"). The main statements which you should write are how do i do this? Jeremy -----Original Message----- From: "Jamal Taweel" <jamal.taweel(a)paltel.net> To: "FreeRadius users mailing list" <freeradius-users(a)lists.freeradius.org> Date: Wed, 17 May 2006 12:40:43 +0200 Subject: RE: getting Freeradius to recorde login failure, etc Hi Jeremy, In order to apply what wants, you should do the following: * Create a table in the radius schema (called "fails_log") to include three columns: trial_date, username, password. * Create a function in the database (called "fails"). The main statements which you should write are " fails ( username1 in out char, password1 in char) return char is v_user char:=''; v_password:=''; begin select username , value into v_user from radcheck where attribute='password' and username= username1 and password=password1; if v_user = '' then insert into fails_log values (sysdate,username1,password1); else return v_user; end if; end; " * Update authorize_ceck_query module in sql.conf file to be as follows: authorize_check_query = "SELECT id,Username,Attribute,Value,op FROM ${authcheck_table} WHERE Username =(select fails('%{SQL-User-Name}','%{Use r-Password}') from dual) ORDER BY id" That is all. Then you can find all failed logs inside the new created table fails_log. Best Regards, Jamal -----Original Message----- From: freeradius-users-bounces+jamal.taweel=paltel.net(a)lists.freeradius.org [mailto:freeradius-users-bounces+jamal.taweel=paltel.net@lists.freeradiu s.org] On Behalf Of Jeremy ohara Sent: Wednesday, May 17, 2006 6:32 AM To: FreeRadius users mailing list Subject: Re: getting Freeradius to recorde login failure, etc Hi there i dont want to sound rude, etc but your not really answering my question. you only answered half of it what do i wite for the sql statement, etc Jeremy -----Original Message----- From: "Duane Cox" <duanec(a)mail.illicom.net> To: "FreeRadius users mailing list" <freeradius-users(a)lists.freeradius.org> Date: Tue, 16 May 2006 22:28:12 -0500 Subject: Re: getting Freeradius to recorde login failure, etc post-auth { # # If you want to have a log of authentication replies, # un-comment the following line, and the 'detail reply_log' # section, above. # reply_log sql Post-Auth-Type REJECT { sql } } ----- Original Message ----- From: Jeremy ohara <mailto:Admin@jemisp.com> To: FreeRadius users mailing list <mailto:freeradius-users@lists.freeradius.org> Sent: Tuesday, May 16, 2006 9:13 PM Subject: Re: getting Freeradius to recorde login failure, etc where and how do i do it and what do i write??? jeremy -----Original Message----- From: "Duane Cox" <duanec(a)mail.illicom.net> To: "FreeRadius users mailing list" < freeradius-users(a)lists.freeradius.org <mailto:freeradius-users@lists.freeradius.org> > Date: Tue, 16 May 2006 18:17:26 -0500 Subject: Re: getting Freeradius to recorde login failure, etc yes, there is a subsection under the post_auth section for such a thing... ----- Original Message ----- From: Jeremy ohara <mailto:Admin@jemisp.com> To: FreeRadius users mailing list <mailto:freeradius-users@lists.freeradius.org> Sent: Tuesday, May 16, 2006 3:24 PM Subject: getting Freeradius to recorde login failure, etc hi there is there a way to get Freeradius 1.0.5 with Mysql to record login-failure, incorrect password or incorrect username into the mysql table? i can see its possbile. but when you login with wrong details it doesnt get to record the login failure, etc. and i dont knwo what code to use and how to make freeradius to record it Jeremy ------------------------------------------------------------------------ ---- This email has been scanned for Virus by MDaemon AntiVirus part of MDaemon. Updated daily to keep up-to-date with all new and old viruses. ------------------------------------------------------------------------ ---- _____ - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html ------------------------------------------------------------------------ ---- This email has been scanned for Virus by MDaemon AntiVirus part of MDaemon. Updated daily to keep up-to-date with all new and old viruses. ------------------------------------------------------------------------ ---- _____ - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html ------------------------------------------------------------------------ ---- This email has been scanned for Virus by MDaemon AntiVirus part of MDaemon. Updated daily to keep up-to-date with all new and old viruses. ------------------------------------------------------------------------ ---- ------------------------------------------------------------------------ ---- This email has been scanned for Virus by MDaemon AntiVirus part of MDaemon. Updated daily to keep up-to-date with all new and old viruses. ------------------------------------------------------------------------ ---- ------------------------------------------------------------------------ ---- This email has been scanned for Virus by MDaemon AntiVirus part of MDaemon. Updated daily to keep up-to-date with all new and old viruses. ------------------------------------------------------------------------ ----

2 3

Radius core dumps (1.1.1 and 1.1.0)
by Remy de Ruysscher 17 May '06

17 May '06

Hi, I'm using freeradius for wireless network authentication using EAP-TLS. I've just completed a complete reinstall of my server because I went crazy about the freeradius core dumps. This has worked for almost 1 year and I have not changed a bit in the conf or OpenSSL. Maybe it's FreeBSD (switched to 6.1 recently and upgraded both the world, kernel and recompiled all packages) I'm hoping it's a user error, please tell me ;). FreeBSD unix-asp.com 6.1-RELEASE FreeBSD 6.1-RELEASE #0: Tue May 16 19:01:49 CEST 2006 remy@unix-asp.com:/usr/obj/usr/src/sys/DEFIANT i386 Tested with 1.1.0 and 1.1.1 remy@/usr/ports/net/freeradius: radiusd -v radiusd: FreeRADIUS Version 1.1.0, for host , built on Mar 15 2006 at 23:52:11 Copyright (C) 2000-2003 The FreeRADIUS server project. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License. For more information about these matters, see the file named COPYRIGHT. --- remy@/usr/ports/net/freeradius: radiusd -X -A Starting - reading configuration files ... reread_config: reading radiusd.conf Config: including file: /usr/local/etc/raddb/proxy.conf Config: including file: /usr/local/etc/raddb/clients.conf Config: including file: /usr/local/etc/raddb/snmp.conf Config: including file: /usr/local/etc/raddb/eap.conf Config: including file: /usr/local/etc/raddb/sql.conf main: prefix = "/usr/local" main: localstatedir = "/var" main: logdir = "/var/log" main: libdir = "/usr/local/lib" main: radacctdir = "/var/log/radacct" main: hostname_lookups = no main: max_request_time = 30 main: cleanup_delay = 5 main: max_requests = 1024 main: delete_blocked_requests = 0 main: port = 0 main: allow_core_dumps = no main: log_stripped_names = no main: log_file = "/var/log/radius.log" main: log_auth = no main: log_auth_badpass = no main: log_auth_goodpass = no main: pidfile = "/var/run/radiusd/radiusd.pid" main: user = "(null)" main: group = "(null)" main: usercollide = no main: lower_user = "no" main: lower_pass = "no" main: nospace_user = "no" main: nospace_pass = "no" main: checkrad = "/usr/local/sbin/checkrad" main: proxy_requests = yes proxy: retry_delay = 5 proxy: retry_count = 3 proxy: synchronous = no proxy: default_fallback = yes proxy: dead_time = 120 proxy: post_proxy_authorize = yes proxy: wake_all_if_all_dead = no security: max_attributes = 200 security: reject_delay = 1 security: status_server = no main: debug_level = 0 read_config_files: reading dictionary read_config_files: reading naslist read_config_files: reading clients read_config_files: reading realms radiusd: entering modules setup Module: Library search path is /usr/local/lib Module: Loaded exec exec: wait = yes exec: program = "(null)" exec: input_pairs = "request" exec: output_pairs = "(null)" exec: packet_type = "(null)" rlm_exec: Wait=yes but no output defined. Did you mean output=none? Module: Instantiated exec (exec) Module: Loaded expr Module: Instantiated expr (expr) Module: Loaded PAP pap: encryption_scheme = "crypt" Module: Instantiated pap (pap) Module: Loaded CHAP Module: Instantiated chap (chap) Module: Loaded MS-CHAP mschap: use_mppe = yes mschap: require_encryption = no mschap: require_strong = no mschap: with_ntdomain_hack = no mschap: passwd = "(null)" mschap: authtype = "MS-CHAP" mschap: ntlm_auth = "(null)" Module: Instantiated mschap (mschap) Module: Loaded System unix: cache = no unix: passwd = "(null)" unix: shadow = "(null)" unix: group = "(null)" unix: radwtmp = "/var/log/radwtmp" unix: usegroup = no unix: cache_reload = 600 Module: Instantiated unix (unix) Module: Loaded eap eap: default_eap_type = "tls" eap: timer_expire = 60 eap: ignore_unknown_eap_types = yes eap: cisco_accounting_username_bug = no rlm_eap: Loaded and initialized type md5 rlm_eap: Loaded and initialized type leap gtc: challenge = "Password: " gtc: auth_type = "PAP" rlm_eap: Loaded and initialized type gtc tls: rsa_key_exchange = no tls: dh_key_exchange = yes tls: rsa_key_length = 512 tls: dh_key_length = 512 tls: verify_depth = 0 tls: CA_path = "(null)" tls: pem_file_type = yes tls: private_key_file = "/usr/local/etc/raddb/certs/defiant.unix.asp.com.pem" tls: certificate_file = "/usr/local/etc/raddb/certs/defiant.unix.asp.com.pem" tls: CA_file = "/usr/local/etc/raddb/certs/root.pem" tls: private_key_password = "whatever" tls: dh_file = "/usr/local/etc/raddb/certs/dh" tls: random_file = "/usr/local/etc/raddb/certs/random" tls: fragment_size = 1024 tls: include_length = yes tls: check_crl = no tls: check_cert_cn = "(null)" rlm_eap_tls: Loading the certificate file as a chain rlm_eap: Loaded and initialized type tls mschapv2: with_ntdomain_hack = no rlm_eap: Loaded and initialized type mschapv2 Module: Instantiated eap (eap) Module: Loaded preprocess preprocess: huntgroups = "/usr/local/etc/raddb/huntgroups" preprocess: hints = "/usr/local/etc/raddb/hints" preprocess: with_ascend_hack = no preprocess: ascend_channels_per_line = 23 preprocess: with_ntdomain_hack = no preprocess: with_specialix_jetstream_hack = no preprocess: with_cisco_vsa_hack = no Module: Instantiated preprocess (preprocess) Module: Loaded detail detail: detailfile = "/var/log/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d" detail: detailperm = 384 detail: dirperm = 493 detail: locking = no Module: Instantiated detail (auth_log) Module: Loaded realm realm: format = "suffix" realm: delimiter = "@" realm: ignore_default = no realm: ignore_null = no Module: Instantiated realm (suffix) Module: Loaded files files: usersfile = "/usr/local/etc/raddb/users" files: acctusersfile = "/usr/local/etc/raddb/acct_users" files: preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users" files: compat = "no" Module: Instantiated files (files) Module: Loaded Acct-Unique-Session-Id acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" Module: Instantiated acct_unique (acct_unique) detail: detailfile = "/var/log/radacct/%{Client-IP-Address}/detail-%Y%m%d" detail: detailperm = 384 detail: dirperm = 493 detail: locking = no Module: Instantiated detail (detail) Module: Loaded radutmp radutmp: filename = "/var/log/radutmp" radutmp: username = "%{User-Name}" radutmp: case_sensitive = yes radutmp: check_with_nas = yes radutmp: perm = 384 radutmp: callerid = yes Module: Instantiated radutmp (radutmp) Listening on authentication *:1812 Listening on accounting *:1813 Ready to process requests. Ready to process requests. rad_recv: Access-Request packet from host 10.0.1.250:3072, id=0, length=147 User-Name = "remy.unix-asp.com" NAS-IP-Address = 10.0.1.250 Called-Station-Id = "0012176fb399" Calling-Station-Id = "0013022105d3" NAS-Identifier = "0012176fb399" NAS-Port = 55 Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x020000160172656d792e756e69782d6173702e636f6d Message-Authenticator = 0x9135364d41356d037feb68e50aa6dfdb Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 radius_xlat: '/var/log/radacct/10.0.1.250/auth-detail-20060517' rlm_detail: /var/log/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/radacct/10.0.1.250/auth-detail-20060517 modcall[authorize]: module "auth_log" returns ok for request 0 modcall[authorize]: module "chap" returns noop for request 0 modcall[authorize]: module "mschap" returns noop for request 0 rlm_realm: No '@' in User-Name = "remy.unix-asp.com", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 0 rlm_eap: EAP packet type response id 0 length 22 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 0 users: Matched entry DEFAULT at line 152 modcall[authorize]: module "files" returns ok for request 0 modcall: leaving group authorize (returns updated) for request 0 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 0 rlm_eap: EAP Identity rlm_eap: processing type tls rlm_eap_tls: Requiring client certificate rlm_eap_tls: Initiate rlm_eap_tls: Start returned 1 modcall[authenticate]: module "eap" returns handled for request 0 modcall: leaving group authenticate (returns handled) for request 0 Sending Access-Challenge of id 0 to 10.0.1.250 port 3072 EAP-Message = 0x010100060d20 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x933d821d84f4d3f02fde047d03d2dc31 Finished request 0 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... rad_recv: Access-Request packet from host 10.0.1.250:3072, id=0, length=249 User-Name = "remy.unix-asp.com" NAS-IP-Address = 10.0.1.250 Called-Station-Id = "0012176fb399" Calling-Station-Id = "0013022105d3" NAS-Identifier = "0012176fb399" NAS-Port = 55 Framed-MTU = 1400 State = 0x933d821d84f4d3f02fde047d03d2dc31 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x0201006a0d8000000060160301005b010000570301446ae7ef6afef97904b3a92cd0b5c520 eb6048d1fc56c35b8973138969b48c1400003000390038003500160013000a00330032002f00 66000500040065006400630062006000150012000900140011000800030100 Message-Authenticator = 0x42a3af30e27aed7bb431db1cca8666c4 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 1 modcall[authorize]: module "preprocess" returns ok for request 1 radius_xlat: '/var/log/radacct/10.0.1.250/auth-detail-20060517' rlm_detail: /var/log/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/radacct/10.0.1.250/auth-detail-20060517 modcall[authorize]: module "auth_log" returns ok for request 1 modcall[authorize]: module "chap" returns noop for request 1 modcall[authorize]: module "mschap" returns noop for request 1 rlm_realm: No '@' in User-Name = "remy.unix-asp.com", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 1 rlm_eap: EAP packet type response id 1 length 106 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 1 users: Matched entry DEFAULT at line 152 modcall[authorize]: module "files" returns ok for request 1 modcall: leaving group authorize (returns updated) for request 1 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 1 rlm_eap: Request found, released from the list rlm_eap: EAP/tls rlm_eap: processing type tls rlm_eap_tls: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Length Included eaptls_verify returned 11 (other): before/accept initialization TLS_accept: before/accept initialization Segmentation fault (core dumped)

2 1

Need somebody to install freeradius
by Antoine Cavalié 17 May '06

17 May '06

Hi all, Need somebody to install Freeradius and Dialupadmin (latest stable versions) and their sources on a Linux/Debian server, in order to : - run Freeradius using a MySQL authentication, - run Dialupadmin to generate stats We give you full access to our Linux/Debian server on which : - Apache is installed BUT we're not sure if it is correctly installed nor if the version is the correct one - MySQL is installed BUT we're not sure if it is correctly installed nor if the version is the correct one - php4 is installed BUT we're not sure if it is correctly installed nor if the version is the correct one Tests we will make before acceptance : 1- add the following line in function rlm_sql_authorize of module rlm_sql.c and recompile everything (make , make install) radlog(L_ERR, "Start of rlm_sql_authorize function"); 2- run "radiusd -X" in a window 3- run "radtest log pas localhost 0 testing123" from another window to check - if the message "Start of rlm_sql_authorize function" appears in the logs - if user 'log' is accepted (user 'log' has to be present in mysql database) 4- reboot server (shutdown -rf now) and check - if radiusd is running - if user 'log' is accepted with above radtest command - if the message "Start of rlm_sql_authorize function" appears in radius.log - if dialupadmin is accessible via https://xx.xx.xx.xx/DialupAdmin/ So there are several steps to go through for this project : - check the correct setup of Apache, MySQL , php - install FreeRadius and Dialupadmin 1.0.2-4 - pass the tests described here above Thank's for your proposals Antoine

2 2

XP drops first EAP Request !!Verry important for my exam!!!
by Krämer Armin 17 May '06

17 May '06

Hi, i have here an working environment with freeradius 1.1.1@debian stable with eap/tls an clinet certifikates and ldap backend. After an long time of experimenting i got MachineCertifikates working basicaly. My problem now ist that when my testing system boots up and halts at the login prompt the machine trys to authenticate a first time with the machine certifikate. This first move end up with "handled" . When i leave the machine at the login prompt, after 3ß seconds the second authentication request is invoked by XP and this time it is successfull. Verrry strange... I tryed lots of settings at the XP Machine (AuthMode,SupplicantMode) but cant find the mistake. Can someone help me please with this problem? Is there an possiblility if tjhis phenomen is normal to reduce the time of this 30 Seconds (reauthentication period at the xp machine)?? I will append the logs of freeradius of an complete authentication process and a secon log from the xp machine with turned on eapol tracing. Maybe this is helpful.Sorry For that zip File but otherwise the message would be to obig für that mailing list... Greetings Armin

1 1

LDAP check attributes
by Antonio Matera 17 May '06

17 May '06

Hallo, I have a problem with the LDAP attributes. I want set an ssid check in my radius authentication. If I do it with the user file all works fine. Now I want to insert this attribute in the ldap schema. I have inserted a new attribute radiusCisco-AVpair in my schema with value ssid=VLAN3 and in the ldap.attrmap file I have inserted the following row: checkItem Cisco-AVPair radiusCiscoAVpair and the ldap module is: ldap { server = "localhost" basedn = "dc=create-net,dc=org" password_attribute = userPassword start_tls = no ldap_connections_number = 5 } but with this configuration my LDAP user is always authenticate with any ssid. What is wrong? Thanks This is my log file: Starting - reading configuration files ... reread_config: reading radiusd.conf Config: including file: /usr/local/etc/raddb/proxy.conf Config: including file: /usr/local/etc/raddb/clients.conf Config: including file: /usr/local/etc/raddb/snmp.conf Config: including file: /usr/local/etc/raddb/eap.conf Config: including file: /usr/local/etc/raddb/sql.conf main: prefix = "/usr/local" main: localstatedir = "/usr/local/var" main: logdir = "/usr/local/var/log/radius" main: libdir = "/usr/local/lib" main: radacctdir = "/usr/local/var/log/radius/radacct" main: hostname_lookups = no main: max_request_time = 30 main: cleanup_delay = 5 main: max_requests = 1024 main: delete_blocked_requests = 0 main: port = 1812 main: allow_core_dumps = no main: log_stripped_names = no main: log_file = "/usr/local/var/log/radius/radius.log" main: log_auth = yes main: log_auth_badpass = yes main: log_auth_goodpass = yes main: pidfile = "/usr/local/var/run/radiusd/radiusd.pid" main: bind_address = 192.168.20.2 IP address [192.168.20.2] main: user = "(null)" main: group = "(null)" main: usercollide = no main: lower_user = "no" main: lower_pass = "no" main: nospace_user = "no" main: nospace_pass = "no" main: checkrad = "/usr/local/sbin/checkrad" main: proxy_requests = no proxy: retry_delay = 5 proxy: retry_count = 3 proxy: synchronous = no proxy: default_fallback = yes proxy: dead_time = 120 proxy: post_proxy_authorize = no proxy: wake_all_if_all_dead = no security: max_attributes = 200 security: reject_delay = 1 security: status_server = yes main: debug_level = 0 read_config_files: reading dictionary read_config_files: reading naslist Using deprecated naslist file. Support for this will go away soon. read_config_files: reading clients read_config_files: reading realms radiusd: entering modules setup Module: Library search path is /usr/local/lib Module: Loaded exec exec: wait = yes exec: program = "(null)" exec: input_pairs = "request" exec: output_pairs = "(null)" exec: packet_type = "(null)" rlm_exec: Wait=yes but no output defined. Did you mean output=none? Module: Instantiated exec (exec) Module: Loaded expr Module: Instantiated expr (expr) Module: Loaded CHAP Module: Instantiated chap (chap) Module: Loaded MS-CHAP mschap: use_mppe = yes mschap: require_encryption = no mschap: require_strong = no mschap: with_ntdomain_hack = no mschap: passwd = "(null)" mschap: authtype = "MS-CHAP" mschap: ntlm_auth = "(null)" Module: Instantiated mschap (mschap) Module: Loaded LDAP ldap: server = "localhost" ldap: port = 389 ldap: net_timeout = 1 ldap: timeout = 4 ldap: timelimit = 3 ldap: identity = "" ldap: tls_mode = no ldap: start_tls = no ldap: tls_cacertfile = "(null)" ldap: tls_cacertdir = "(null)" ldap: tls_certfile = "(null)" ldap: tls_keyfile = "(null)" ldap: tls_randfile = "(null)" ldap: tls_require_cert = "allow" ldap: password = "" ldap: basedn = "dc=create-net,dc=org" ldap: filter = "(uid=%{Stripped-User-Name:-%{User-Name}})" ldap: base_filter = "(objectclass=radiusprofile)" ldap: default_profile = "(null)" ldap: profile_attribute = "(null)" ldap: password_header = "(null)" ldap: password_attribute = "userPassword" ldap: access_attr = "(null)" ldap: groupname_attribute = "cn" ldap: groupmembership_filter = "(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))" ldap: groupmembership_attribute = "(null)" ldap: dictionary_mapping = "/usr/local/etc/raddb/ldap.attrmap" ldap: ldap_debug = 0 ldap: ldap_connections_number = 5 ldap: compare_check_items = no ldap: access_attr_used_for_allow = yes ldap: do_xlat = yes ldap: set_auth_type = yes rlm_ldap: Registering ldap_groupcmp for Ldap-Group rlm_ldap: Registering ldap_xlat with xlat_name ldap rlm_ldap: reading ldap<->radius mappings from file /usr/local/etc/raddb/ldap.attrmap rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address rlm_ldap: LDAP radiusCisco-AVpair mapped to RADIUS Cisco-AVPair rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network rlm_ldap: LDAP radiusClass mapped to RADIUS Class rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS Framed-AppleTalk-Network rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message conns: 0x9730f88 Module: Instantiated ldap (ldap) Module: Loaded eap eap: default_eap_type = "tls" eap: timer_expire = 60 eap: ignore_unknown_eap_types = no eap: cisco_accounting_username_bug = no rlm_eap: Loaded and initialized type md5 rlm_eap: Loaded and initialized type leap gtc: challenge = "Password: " gtc: auth_type = "PAP" rlm_eap: Loaded and initialized type gtc tls: rsa_key_exchange = no tls: dh_key_exchange = yes tls: rsa_key_length = 512 tls: dh_key_length = 512 tls: verify_depth = 0 tls: CA_path = "/usr/local/etc/raddb/certs/masterkeys2/" tls: pem_file_type = yes tls: private_key_file = "/usr/local/etc/raddb/certs/masterkeys2/cert-srv.pem" tls: certificate_file = "/usr/local/etc/raddb/certs/masterkeys2/cert-srv.pem" tls: CA_file = "/usr/local/etc/raddb/certs/masterkeys2/root.pem" tls: private_key_password = "whatever" tls: dh_file = "/usr/local/etc/raddb/certs/dh" tls: random_file = "/usr/local/etc/raddb/certs/random" tls: fragment_size = 1024 tls: include_length = yes tls: check_crl = yes tls: check_cert_cn = "%{User-Name}" rlm_eap_tls: Loading the certificate file as a chain rlm_eap: Loaded and initialized type tls peap: default_eap_type = "mschapv2" peap: copy_request_to_tunnel = yes peap: use_tunneled_reply = no peap: proxy_tunneled_request_as_eap = yes rlm_eap: Loaded and initialized type peap mschapv2: with_ntdomain_hack = no rlm_eap: Loaded and initialized type mschapv2 Module: Instantiated eap (eap) Module: Loaded preprocess preprocess: huntgroups = "/usr/local/etc/raddb/huntgroups" preprocess: hints = "/usr/local/etc/raddb/hints" preprocess: with_ascend_hack = no preprocess: ascend_channels_per_line = 23 preprocess: with_ntdomain_hack = no preprocess: with_specialix_jetstream_hack = no preprocess: with_cisco_vsa_hack = yes Module: Instantiated preprocess (preprocess) Module: Loaded realm realm: format = "suffix" realm: delimiter = "@" realm: ignore_default = no realm: ignore_null = no Module: Instantiated realm (suffix) Module: Loaded files files: usersfile = "/usr/local/etc/raddb/users" files: acctusersfile = "/usr/local/etc/raddb/acct_users" files: preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users" files: compat = "no" Module: Instantiated files (files) Module: Loaded Acct-Unique-Session-Id acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" Module: Instantiated acct_unique (acct_unique) Module: Loaded detail detail: detailfile = "/usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" detail: detailperm = 384 detail: dirperm = 493 detail: locking = no Module: Instantiated detail (detail) Module: Loaded System unix: cache = no unix: passwd = "(null)" unix: shadow = "/etc/shadow" unix: group = "(null)" unix: radwtmp = "/usr/local/var/log/radius/radwtmp" unix: usegroup = no unix: cache_reload = 600 Module: Instantiated unix (unix) Module: Loaded radutmp radutmp: filename = "/usr/local/var/log/radius/radutmp" radutmp: username = "%{User-Name}" radutmp: case_sensitive = yes radutmp: check_with_nas = yes radutmp: perm = 384 radutmp: callerid = yes Module: Instantiated radutmp (radutmp) Listening on authentication 192.168.20.2:1812 Listening on accounting 192.168.20.2:1813 Ready to process requests. rad_recv: Access-Request packet from host 192.168.20.4:1645, id=86, length=164 User-Name = "testradius" Framed-MTU = 1400 Called-Station-Id = "0012.dacb.8420" Calling-Station-Id = "000c.f135.f1ba" Cisco-AVPair = "ssid=cn-test" Service-Type = Login-User Message-Authenticator = 0x8a43703112607b7280aeb5b4e4198e80 EAP-Message = 0x0201000f0174657374726164697573 NAS-Port-Type = Wireless-802.11 Cisco-NAS-Port = "289" NAS-Port = 289 NAS-IP-Address = 192.168.20.4 NAS-Identifier = "ap" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 modcall[authorize]: module "mschap" returns noop for request 0 rlm_realm: No '@' in User-Name = "testradius", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 0 rlm_eap: EAP packet type response id 1 length 15 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 0 modcall[authorize]: module "files" returns notfound for request 0 rlm_ldap: - authorize rlm_ldap: performing user authorization for testradius radius_xlat: '(uid=testradius)' radius_xlat: 'dc=create-net,dc=org' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: attempting LDAP reconnection rlm_ldap: (re)connect to localhost:389, authentication 0 rlm_ldap: bind as / to localhost:389 rlm_ldap: waiting for bind result ... rlm_ldap: Bind was successful rlm_ldap: performing search in dc=create-net,dc=org, with filter (uid=testradius) rlm_ldap: Added password testradius in check items rlm_ldap: looking for check items in directory... rlm_ldap: Adding radiusCisco-AVpair as Cisco-AVPair, value ssid=VLAN3 & op=21 rlm_ldap: looking for reply items in directory... rlm_ldap: user testradius authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldap" returns ok for request 0 modcall: leaving group authorize (returns updated) for request 0 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 0 rlm_eap: EAP Identity rlm_eap: processing type tls rlm_eap_tls: Requiring client certificate rlm_eap_tls: Initiate rlm_eap_tls: Start returned 1 modcall[authenticate]: module "eap" returns handled for request 0 modcall: leaving group authenticate (returns handled) for request 0 Sending Access-Challenge of id 86 to 192.168.20.4 port 1645 EAP-Message = 0x010200060d20 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xaa71830b1f63ad0e089e958ae1747901 Finished request 0 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... rad_recv: Access-Request packet from host 192.168.20.4:1645, id=87, length=173 User-Name = "testradius" Framed-MTU = 1400 Called-Station-Id = "0012.dacb.8420" Calling-Station-Id = "000c.f135.f1ba" Cisco-AVPair = "ssid=cn-test" Service-Type = Login-User Message-Authenticator = 0x7531829c87b90b64accabf5f409e414f EAP-Message = 0x020200060319 NAS-Port-Type = Wireless-802.11 Cisco-NAS-Port = "289" NAS-Port = 289 State = 0xaa71830b1f63ad0e089e958ae1747901 NAS-IP-Address = 192.168.20.4 NAS-Identifier = "ap" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 1 modcall[authorize]: module "preprocess" returns ok for request 1 modcall[authorize]: module "mschap" returns noop for request 1 rlm_realm: No '@' in User-Name = "testradius", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 1 rlm_eap: EAP packet type response id 2 length 6 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 1 modcall[authorize]: module "files" returns notfound for request 1 rlm_ldap: - authorize rlm_ldap: performing user authorization for testradius radius_xlat: '(uid=testradius)' radius_xlat: 'dc=create-net,dc=org' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in dc=create-net,dc=org, with filter (uid=testradius) rlm_ldap: Added password testradius in check items rlm_ldap: looking for check items in directory... rlm_ldap: Adding radiusCisco-AVpair as Cisco-AVPair, value ssid=VLAN3 & op=21 rlm_ldap: looking for reply items in directory... rlm_ldap: user testradius authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldap" returns ok for request 1 modcall: leaving group authorize (returns updated) for request 1 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 1 rlm_eap: Request found, released from the list rlm_eap: EAP NAK rlm_eap: EAP-NAK asked for EAP-Type/peap rlm_eap: processing type tls rlm_eap_tls: Initiate rlm_eap_tls: Start returned 1 modcall[authenticate]: module "eap" returns handled for request 1 modcall: leaving group authenticate (returns handled) for request 1 Sending Access-Challenge of id 87 to 192.168.20.4 port 1645 EAP-Message = 0x010300061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xca42865dfd4dc652e2dbb7797bb58dfe Finished request 1 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 192.168.20.4:1645, id=88, length=273 User-Name = "testradius" Framed-MTU = 1400 Called-Station-Id = "0012.dacb.8420" Calling-Station-Id = "000c.f135.f1ba" Cisco-AVPair = "ssid=cn-test" Service-Type = Login-User Message-Authenticator = 0x4ddfc31c44b93297b86317355163cef7 EAP-Message = 0x0203006a198000000060160301005b0100005703014468424202d927a51cba80f4ed1c4c6c915225855eac3333887cf4ddb8fbb55f00003000390038003500160013000a00330032002f0066000500040065006400630062006000150012000900140011000800030100 NAS-Port-Type = Wireless-802.11 Cisco-NAS-Port = "289" NAS-Port = 289 State = 0xca42865dfd4dc652e2dbb7797bb58dfe NAS-IP-Address = 192.168.20.4 NAS-Identifier = "ap" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 2 modcall[authorize]: module "preprocess" returns ok for request 2 modcall[authorize]: module "mschap" returns noop for request 2 rlm_realm: No '@' in User-Name = "testradius", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 2 rlm_eap: EAP packet type response id 3 length 106 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 2 modcall[authorize]: module "files" returns notfound for request 2 rlm_ldap: - authorize rlm_ldap: performing user authorization for testradius radius_xlat: '(uid=testradius)' radius_xlat: 'dc=create-net,dc=org' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in dc=create-net,dc=org, with filter (uid=testradius) rlm_ldap: Added password testradius in check items rlm_ldap: looking for check items in directory... rlm_ldap: Adding radiusCisco-AVpair as Cisco-AVPair, value ssid=VLAN3 & op=21 rlm_ldap: looking for reply items in directory... rlm_ldap: user testradius authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldap" returns ok for request 2 modcall: leaving group authorize (returns updated) for request 2 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 2 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Length Included eaptls_verify returned 11 (other): before/accept initialization TLS_accept: before/accept initialization rlm_eap_tls: <<< TLS 1.0 Handshake [length 005b], ClientHello TLS_accept: SSLv3 read client hello A rlm_eap_tls: >>> TLS 1.0 Handshake [length 004a], ServerHello TLS_accept: SSLv3 write server hello A rlm_eap_tls: >>> TLS 1.0 Handshake [length 0673], Certificate TLS_accept: SSLv3 write certificate A rlm_eap_tls: >>> TLS 1.0 Handshake [length 0004], ServerHelloDone TLS_accept: SSLv3 write server done A TLS_accept: SSLv3 flush data TLS_accept:error in SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode eaptls_process returned 13 rlm_eap_peap: EAPTLS_HANDLED modcall[authenticate]: module "eap" returns handled for request 2 modcall: leaving group authenticate (returns handled) for request 2 Sending Access-Challenge of id 88 to 192.168.20.4 port 1645 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x377fa815cd412cb80b442714852fe94cb9aae46c08f2e84cc7092bdf887d069e2ab1fd2cf56c9332b87e83990d670003a9308203a53082030ea003020102020900d6c51af184c17a13300d06092a864886f70d0101050500308194310b3009060355040613024954310e300c060355040813054974616c79310f300d060355040713065472656e746f31133011060355040a130a4352454154452d4e455431133011060355040b130a4352454154452d4e4554310d300b06035504031304524f4f54312b302906092a864886f70d010901161c616e746f6e696f2e6d6174657261406372656174652d6e65742e6974301e170d30363033313531353130 EAP-Message = 0x30305a170d3038303331343135313030305a30819431 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xf0f16fc3f467b1f240f723dfa11b62f3 Finished request 2 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 192.168.20.4:1645, id=89, length=173 User-Name = "testradius" Framed-MTU = 1400 Called-Station-Id = "0012.dacb.8420" Calling-Station-Id = "000c.f135.f1ba" Cisco-AVPair = "ssid=cn-test" Service-Type = Login-User Message-Authenticator = 0xc86b8dcf602273235ee20371bf31cd64 EAP-Message = 0x020400061900 NAS-Port-Type = Wireless-802.11 Cisco-NAS-Port = "289" NAS-Port = 289 State = 0xf0f16fc3f467b1f240f723dfa11b62f3 NAS-IP-Address = 192.168.20.4 NAS-Identifier = "ap" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 3 modcall[authorize]: module "preprocess" returns ok for request 3 modcall[authorize]: module "mschap" returns noop for request 3 rlm_realm: No '@' in User-Name = "testradius", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 3 rlm_eap: EAP packet type response id 4 length 6 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 3 modcall[authorize]: module "files" returns notfound for request 3 rlm_ldap: - authorize rlm_ldap: performing user authorization for testradius radius_xlat: '(uid=testradius)' radius_xlat: 'dc=create-net,dc=org' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in dc=create-net,dc=org, with filter (uid=testradius) rlm_ldap: Added password testradius in check items rlm_ldap: looking for check items in directory... rlm_ldap: Adding radiusCisco-AVpair as Cisco-AVPair, value ssid=VLAN3 & op=21 rlm_ldap: looking for reply items in directory... rlm_ldap: user testradius authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldap" returns ok for request 3 modcall: leaving group authorize (returns updated) for request 3 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 3 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Received EAP-TLS ACK message rlm_eap_tls: ack handshake fragment handler eaptls_verify returned 1 eaptls_process returned 13 rlm_eap_peap: EAPTLS_HANDLED modcall[authenticate]: module "eap" returns handled for request 3 modcall: leaving group authenticate (returns handled) for request 3 Sending Access-Challenge of id 89 to 192.168.20.4 port 1645 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x2a864886f70d010901161c616e746f6e696f2e6d6174657261406372656174652d6e65742e6974820900d6c51af184c17a13300c0603551d13040530030101ff300d06092a864886f70d0101050500038181009afe6349178f51966293fa52eafafe825e9441722f5f86ebb1e995589569640a40f04f3c969ea63173a875d9f055a0b19dc2c463a1c5de3a447dc04f369d5fb56fdff6bca5ef16e785a46f3646e062ac0c7cacc7cbfd163ccbb314bc66e8bbc68ac6d594e47d0cd76d66aec45508952892553bbe957973f8e6c5ac901f86881b16030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x6e149fab9e804ff893086dc63288956c Finished request 3 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 192.168.20.4:1645, id=90, length=375 User-Name = "testradius" Framed-MTU = 1400 Called-Station-Id = "0012.dacb.8420" Calling-Station-Id = "000c.f135.f1ba" Cisco-AVPair = "ssid=cn-test" Service-Type = Login-User Message-Authenticator = 0x2b8da6bb902efbb45870bfb4ee8d4721 EAP-Message = 0x020500d01980000000c616030100861000008200809c9bc5e92e77cd8e43f601da17d92b70c3102f4177f73cdd2200af4fb429d2b9e6c89c04a11054b63541143bfd4df19f9abe4597ca56f06cf6384abce4342eb3c882515c6e7bd41c042390cb35f0a2e78023aecca90cdeb8ed53ce0329752e0dfbd145e0a60f5cde8b952f6b056f56fa50dfb9a09e09becd16790b8c5f5f744b1403010001011603010030493ada867a57f10f420cf922d875cd8252176dd386a93444f7db712fa0c130f2f6910c7d33f7d7d3639f8415ad40827b NAS-Port-Type = Wireless-802.11 Cisco-NAS-Port = "289" NAS-Port = 289 State = 0x6e149fab9e804ff893086dc63288956c NAS-IP-Address = 192.168.20.4 NAS-Identifier = "ap" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 4 modcall[authorize]: module "preprocess" returns ok for request 4 modcall[authorize]: module "mschap" returns noop for request 4 rlm_realm: No '@' in User-Name = "testradius", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 4 rlm_eap: EAP packet type response id 5 length 208 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 4 modcall[authorize]: module "files" returns notfound for request 4 rlm_ldap: - authorize rlm_ldap: performing user authorization for testradius radius_xlat: '(uid=testradius)' radius_xlat: 'dc=create-net,dc=org' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in dc=create-net,dc=org, with filter (uid=testradius) rlm_ldap: Added password testradius in check items rlm_ldap: looking for check items in directory... rlm_ldap: Adding radiusCisco-AVpair as Cisco-AVPair, value ssid=VLAN3 & op=21 rlm_ldap: looking for reply items in directory... rlm_ldap: user testradius authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldap" returns ok for request 4 modcall: leaving group authorize (returns updated) for request 4 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 4 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Length Included eaptls_verify returned 11 rlm_eap_tls: <<< TLS 1.0 Handshake [length 0086], ClientKeyExchange TLS_accept: SSLv3 read client key exchange A rlm_eap_tls: <<< TLS 1.0 ChangeCipherSpec [length 0001] rlm_eap_tls: <<< TLS 1.0 Handshake [length 0010], Finished TLS_accept: SSLv3 read finished A rlm_eap_tls: >>> TLS 1.0 ChangeCipherSpec [length 0001] TLS_accept: SSLv3 write change cipher spec A rlm_eap_tls: >>> TLS 1.0 Handshake [length 0010], Finished TLS_accept: SSLv3 write finished A TLS_accept: SSLv3 flush data (other): SSL negotiation finished successfully SSL Connection Established eaptls_process returned 13 rlm_eap_peap: EAPTLS_HANDLED modcall[authenticate]: module "eap" returns handled for request 4 modcall: leaving group authenticate (returns handled) for request 4 Sending Access-Challenge of id 90 to 192.168.20.4 port 1645 EAP-Message = 0x0106004119001403010001011603010030294ac923e9c7ee0c1317386255a5314fed93bdb0072dd4a1f17f415ae73c7fcf9cf766a41acbf5cfd2efb8c7175c7bcd Message-Authenticator = 0x00000000000000000000000000000000 State = 0x9ce29ff8d1c3357e90aed9aa66af7cca Finished request 4 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 192.168.20.4:1645, id=91, length=173 User-Name = "testradius" Framed-MTU = 1400 Called-Station-Id = "0012.dacb.8420" Calling-Station-Id = "000c.f135.f1ba" Cisco-AVPair = "ssid=cn-test" Service-Type = Login-User Message-Authenticator = 0x63027bb2608f1b908972d531373bde2e EAP-Message = 0x020600061900 NAS-Port-Type = Wireless-802.11 Cisco-NAS-Port = "289" NAS-Port = 289 State = 0x9ce29ff8d1c3357e90aed9aa66af7cca NAS-IP-Address = 192.168.20.4 NAS-Identifier = "ap" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 5 modcall[authorize]: module "preprocess" returns ok for request 5 modcall[authorize]: module "mschap" returns noop for request 5 rlm_realm: No '@' in User-Name = "testradius", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 5 rlm_eap: EAP packet type response id 6 length 6 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 5 modcall[authorize]: module "files" returns notfound for request 5 rlm_ldap: - authorize rlm_ldap: performing user authorization for testradius radius_xlat: '(uid=testradius)' radius_xlat: 'dc=create-net,dc=org' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in dc=create-net,dc=org, with filter (uid=testradius) rlm_ldap: Added password testradius in check items rlm_ldap: looking for check items in directory... rlm_ldap: Adding radiusCisco-AVpair as Cisco-AVPair, value ssid=VLAN3 & op=21 rlm_ldap: looking for reply items in directory... rlm_ldap: user testradius authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldap" returns ok for request 5 modcall: leaving group authorize (returns updated) for request 5 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 5 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Received EAP-TLS ACK message rlm_eap_tls: ack handshake is finished eaptls_verify returned 3 eaptls_process returned 3 rlm_eap_peap: EAPTLS_SUCCESS modcall[authenticate]: module "eap" returns handled for request 5 modcall: leaving group authenticate (returns handled) for request 5 Sending Access-Challenge of id 91 to 192.168.20.4 port 1645 EAP-Message = 0x010700501900170301002028b8b716334e409d6941093bd92fde78c605f610518815d093df4b5de567bc481703010020aa5243bab5bb677ac1248b22a3c3469d1069bfbb38d31d829a3eaeb438d708a3 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xb7f85f0bfdaf582686c515bef2f8e139 Finished request 5 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 192.168.20.4:1645, id=92, length=247 User-Name = "testradius" Framed-MTU = 1400 Called-Station-Id = "0012.dacb.8420" Calling-Station-Id = "000c.f135.f1ba" Cisco-AVPair = "ssid=cn-test" Service-Type = Login-User Message-Authenticator = 0xe6cf0d19621b9acd7ad16f3e000e0f57 EAP-Message = 0x02070050190017030100209c304a7e5af6573629b8effb46b67e30c4770ead531f3d76451253ff5318efaa17030100207cf3dd4e003a6ec8108e24b8838364fd51eebb2e92459f76d33071a1bde600f7 NAS-Port-Type = Wireless-802.11 Cisco-NAS-Port = "289" NAS-Port = 289 State = 0xb7f85f0bfdaf582686c515bef2f8e139 NAS-IP-Address = 192.168.20.4 NAS-Identifier = "ap" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 6 modcall[authorize]: module "preprocess" returns ok for request 6 modcall[authorize]: module "mschap" returns noop for request 6 rlm_realm: No '@' in User-Name = "testradius", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 6 rlm_eap: EAP packet type response id 7 length 80 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 6 modcall[authorize]: module "files" returns notfound for request 6 rlm_ldap: - authorize rlm_ldap: performing user authorization for testradius radius_xlat: '(uid=testradius)' radius_xlat: 'dc=create-net,dc=org' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in dc=create-net,dc=org, with filter (uid=testradius) rlm_ldap: Added password testradius in check items rlm_ldap: looking for check items in directory... rlm_ldap: Adding radiusCisco-AVpair as Cisco-AVPair, value ssid=VLAN3 & op=21 rlm_ldap: looking for reply items in directory... rlm_ldap: user testradius authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldap" returns ok for request 6 modcall: leaving group authorize (returns updated) for request 6 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 6 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS eaptls_verify returned 7 rlm_eap_tls: Done initial handshake eaptls_process returned 7 rlm_eap_peap: EAPTLS_OK rlm_eap_peap: Session established. Decoding tunneled attributes. rlm_eap_peap: Identity - testradius rlm_eap_peap: Tunneled data is valid. PEAP: Got tunneled identity of testradius PEAP: Setting default EAP type for tunneled EAP session. PEAP: Setting User-Name to testradius Processing the authorize section of radiusd.conf modcall: entering group authorize for request 6 modcall[authorize]: module "preprocess" returns ok for request 6 modcall[authorize]: module "mschap" returns noop for request 6 rlm_realm: No '@' in User-Name = "testradius", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 6 rlm_eap: EAP packet type response id 7 length 15 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 6 modcall[authorize]: module "files" returns notfound for request 6 rlm_ldap: - authorize rlm_ldap: performing user authorization for testradius radius_xlat: '(uid=testradius)' radius_xlat: 'dc=create-net,dc=org' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in dc=create-net,dc=org, with filter (uid=testradius) rlm_ldap: Added password testradius in check items rlm_ldap: looking for check items in directory... rlm_ldap: Adding radiusCisco-AVpair as Cisco-AVPair, value ssid=VLAN3 & op=21 rlm_ldap: looking for reply items in directory... rlm_ldap: user testradius authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldap" returns ok for request 6 modcall: leaving group authorize (returns updated) for request 6 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 6 rlm_eap: EAP Identity rlm_eap: processing type mschapv2 rlm_eap_mschapv2: Issuing Challenge modcall[authenticate]: module "eap" returns handled for request 6 modcall: leaving group authenticate (returns handled) for request 6 PEAP: Got tunneled Access-Challenge modcall[authenticate]: module "eap" returns handled for request 6 modcall: leaving group authenticate (returns handled) for request 6 Sending Access-Challenge of id 92 to 192.168.20.4 port 1645 EAP-Message = 0x01080070190017030100203d185202b13b4febb5cc464d0b36377b81c831095d55011f9b6421cd28f4a43217030100405c277680c403d05e9c33482b001a6bc8c0eb28e221aed09fa965843bf26d689bae1f84df2d3c276ce32be058a876a9ea89e779235df581de93d77bc360b5c50a Message-Authenticator = 0x00000000000000000000000000000000 State = 0x41c9a9d8a10b154234a868b611c49edd Finished request 6 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 192.168.20.4:1645, id=93, length=311 User-Name = "testradius" Framed-MTU = 1400 Called-Station-Id = "0012.dacb.8420" Calling-Station-Id = "000c.f135.f1ba" Cisco-AVPair = "ssid=cn-test" Service-Type = Login-User Message-Authenticator = 0x54dbe70cf63e03e9b0e87a7ffb56f620 EAP-Message = 0x0208009019001703010020d57d28136594254ec829db59670b1142027f032a88e0ab4e339392d13036f97b170301006058d5a177e8bbd8b16da599810d51ee4032d4c9ffe4dc11c97015c32331df8aca4b8fb339af0377eafce00e7ee23dd7f3cf984d6af8a5a71162f3daecec2f1654852e1ecfec560aee33cb22c72b7a31d394456d9e1508051c75b1498e234182b7 NAS-Port-Type = Wireless-802.11 Cisco-NAS-Port = "289" NAS-Port = 289 State = 0x41c9a9d8a10b154234a868b611c49edd NAS-IP-Address = 192.168.20.4 NAS-Identifier = "ap" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 7 modcall[authorize]: module "preprocess" returns ok for request 7 modcall[authorize]: module "mschap" returns noop for request 7 rlm_realm: No '@' in User-Name = "testradius", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 7 rlm_eap: EAP packet type response id 8 length 144 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 7 modcall[authorize]: module "files" returns notfound for request 7 rlm_ldap: - authorize rlm_ldap: performing user authorization for testradius radius_xlat: '(uid=testradius)' radius_xlat: 'dc=create-net,dc=org' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in dc=create-net,dc=org, with filter (uid=testradius) rlm_ldap: Added password testradius in check items rlm_ldap: looking for check items in directory... rlm_ldap: Adding radiusCisco-AVpair as Cisco-AVPair, value ssid=VLAN3 & op=21 rlm_ldap: looking for reply items in directory... rlm_ldap: user testradius authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldap" returns ok for request 7 modcall: leaving group authorize (returns updated) for request 7 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 7 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS eaptls_verify returned 7 rlm_eap_tls: Done initial handshake eaptls_process returned 7 rlm_eap_peap: EAPTLS_OK rlm_eap_peap: Session established. Decoding tunneled attributes. rlm_eap_peap: EAP type mschapv2 rlm_eap_peap: Tunneled data is valid. PEAP: Setting User-Name to testradius PEAP: Adding old state with 0e 6d Processing the authorize section of radiusd.conf modcall: entering group authorize for request 7 modcall[authorize]: module "preprocess" returns ok for request 7 modcall[authorize]: module "mschap" returns noop for request 7 rlm_realm: No '@' in User-Name = "testradius", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 7 rlm_eap: EAP packet type response id 8 length 69 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 7 modcall[authorize]: module "files" returns notfound for request 7 rlm_ldap: - authorize rlm_ldap: performing user authorization for testradius radius_xlat: '(uid=testradius)' radius_xlat: 'dc=create-net,dc=org' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in dc=create-net,dc=org, with filter (uid=testradius) rlm_ldap: Added password testradius in check items rlm_ldap: looking for check items in directory... rlm_ldap: Adding radiusCisco-AVpair as Cisco-AVPair, value ssid=VLAN3 & op=21 rlm_ldap: looking for reply items in directory... rlm_ldap: user testradius authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldap" returns ok for request 7 modcall: leaving group authorize (returns updated) for request 7 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 7 rlm_eap: Request found, released from the list rlm_eap: EAP/mschapv2 rlm_eap: processing type mschapv2 Processing the authenticate section of radiusd.conf modcall: entering group MS-CHAP for request 7 rlm_mschap: Told to do MS-CHAPv2 for testradius with NT-Password rlm_mschap: adding MS-CHAPv2 MPPE keys modcall[authenticate]: module "mschap" returns ok for request 7 modcall: leaving group MS-CHAP (returns ok) for request 7 MSCHAP Success modcall[authenticate]: module "eap" returns handled for request 7 modcall: leaving group authenticate (returns handled) for request 7 PEAP: Got tunneled Access-Challenge modcall[authenticate]: module "eap" returns handled for request 7 modcall: leaving group authenticate (returns handled) for request 7 Sending Access-Challenge of id 93 to 192.168.20.4 port 1645 EAP-Message = 0x010900801900170301002008739fac8dfedd4813968370d0fc326c59a8e74d8db02be5127a4de5e1f8697b17030100509bc8996b8c9173e78fc71777ec3bd5d4865b28c1d637047803876e08e95d1cbaaab70917fdbdae3691e9b6ec36edcedd48cd74607e54dc80aefc5bb87474fc1740d64e3b3db8bc8a6f0846bea8659ceb Message-Authenticator = 0x00000000000000000000000000000000 State = 0xe242737767a1d4a377058568d102c376 Finished request 7 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 192.168.20.4:1645, id=94, length=247 User-Name = "testradius" Framed-MTU = 1400 Called-Station-Id = "0012.dacb.8420" Calling-Station-Id = "000c.f135.f1ba" Cisco-AVPair = "ssid=cn-test" Service-Type = Login-User Message-Authenticator = 0xa84673f1253b4bb56d4067a2ee5a6007 EAP-Message = 0x0209005019001703010020b0205b783726a7e63c0dfbbc6e32dc9bf96f59dc53e711f8f5245fa3a767ca95170301002007f2dbd650ad2653a4b49a3006c8c7d977fd18e395d41732719fc83739aeedbe NAS-Port-Type = Wireless-802.11 Cisco-NAS-Port = "289" NAS-Port = 289 State = 0xe242737767a1d4a377058568d102c376 NAS-IP-Address = 192.168.20.4 NAS-Identifier = "ap" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 8 modcall[authorize]: module "preprocess" returns ok for request 8 modcall[authorize]: module "mschap" returns noop for request 8 rlm_realm: No '@' in User-Name = "testradius", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 8 rlm_eap: EAP packet type response id 9 length 80 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 8 modcall[authorize]: module "files" returns notfound for request 8 rlm_ldap: - authorize rlm_ldap: performing user authorization for testradius radius_xlat: '(uid=testradius)' radius_xlat: 'dc=create-net,dc=org' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in dc=create-net,dc=org, with filter (uid=testradius) rlm_ldap: Added password testradius in check items rlm_ldap: looking for check items in directory... rlm_ldap: Adding radiusCisco-AVpair as Cisco-AVPair, value ssid=VLAN3 & op=21 rlm_ldap: looking for reply items in directory... rlm_ldap: user testradius authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldap" returns ok for request 8 modcall: leaving group authorize (returns updated) for request 8 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 8 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS eaptls_verify returned 7 rlm_eap_tls: Done initial handshake eaptls_process returned 7 rlm_eap_peap: EAPTLS_OK rlm_eap_peap: Session established. Decoding tunneled attributes. rlm_eap_peap: EAP type mschapv2 rlm_eap_peap: Tunneled data is valid. PEAP: Setting User-Name to testradius PEAP: Adding old state with 34 97 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 8 modcall[authorize]: module "preprocess" returns ok for request 8 modcall[authorize]: module "mschap" returns noop for request 8 rlm_realm: No '@' in User-Name = "testradius", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 8 rlm_eap: EAP packet type response id 9 length 6 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 8 modcall[authorize]: module "files" returns notfound for request 8 rlm_ldap: - authorize rlm_ldap: performing user authorization for testradius radius_xlat: '(uid=testradius)' radius_xlat: 'dc=create-net,dc=org' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in dc=create-net,dc=org, with filter (uid=testradius) rlm_ldap: Added password testradius in check items rlm_ldap: looking for check items in directory... rlm_ldap: Adding radiusCisco-AVpair as Cisco-AVPair, value ssid=VLAN3 & op=21 rlm_ldap: looking for reply items in directory... rlm_ldap: user testradius authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldap" returns ok for request 8 modcall: leaving group authorize (returns updated) for request 8 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 8 rlm_eap: Request found, released from the list rlm_eap: EAP/mschapv2 rlm_eap: processing type mschapv2 rlm_eap: Freeing handler modcall[authenticate]: module "eap" returns ok for request 8 modcall: leaving group authenticate (returns ok) for request 8 Login OK: [testradius/<no User-Password attribute>] (from client cn-radius port 289 cli 000c.f135.f1ba) PEAP: Tunneled authentication was successful. rlm_eap_peap: SUCCESS modcall[authenticate]: module "eap" returns handled for request 8 modcall: leaving group authenticate (returns handled) for request 8 Sending Access-Challenge of id 94 to 192.168.20.4 port 1645 EAP-Message = 0x010a005019001703010020dc74f623a748e6c82d95b4dc908f8831d572ebf662ebe3287f774a191d83c25717030100202b4207d67864ce764fe7fe0d17c29afc6da54a36fe11e961edde3c4f01ac4505 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xafb670111e339beb53b8dcaa76cbe11c Finished request 8 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 192.168.20.4:1645, id=95, length=247 User-Name = "testradius" Framed-MTU = 1400 Called-Station-Id = "0012.dacb.8420" Calling-Station-Id = "000c.f135.f1ba" Cisco-AVPair = "ssid=cn-test" Service-Type = Login-User Message-Authenticator = 0xc45e189222dd876003933eb16e724bc4 EAP-Message = 0x020a005019001703010020a740106e429d51742e3dfe82eeb24d4df3511b9f061d8bc0ccd297532bb6fd29170301002001e0cc2468fcaa795254710a0a7ad1ed8d2e7e3d27727e8501f87739b9ee017c NAS-Port-Type = Wireless-802.11 Cisco-NAS-Port = "289" NAS-Port = 289 State = 0xafb670111e339beb53b8dcaa76cbe11c NAS-IP-Address = 192.168.20.4 NAS-Identifier = "ap" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 9 modcall[authorize]: module "preprocess" returns ok for request 9 modcall[authorize]: module "mschap" returns noop for request 9 rlm_realm: No '@' in User-Name = "testradius", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 9 rlm_eap: EAP packet type response id 10 length 80 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 9 modcall[authorize]: module "files" returns notfound for request 9 rlm_ldap: - authorize rlm_ldap: performing user authorization for testradius radius_xlat: '(uid=testradius)' radius_xlat: 'dc=create-net,dc=org' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in dc=create-net,dc=org, with filter (uid=testradius) rlm_ldap: Added password testradius in check items rlm_ldap: looking for check items in directory... rlm_ldap: Adding radiusCisco-AVpair as Cisco-AVPair, value ssid=VLAN3 & op=21 rlm_ldap: looking for reply items in directory... rlm_ldap: user testradius authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldap" returns ok for request 9 modcall: leaving group authorize (returns updated) for request 9 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 9 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS eaptls_verify returned 7 rlm_eap_tls: Done initial handshake eaptls_process returned 7 rlm_eap_peap: EAPTLS_OK rlm_eap_peap: Session established. Decoding tunneled attributes. rlm_eap_peap: Received EAP-TLV response. rlm_eap_peap: Tunneled data is valid. rlm_eap_peap: Success rlm_eap: Freeing handler modcall[authenticate]: module "eap" returns ok for request 9 modcall: leaving group authenticate (returns ok) for request 9 Login OK: [testradius/<no User-Password attribute>] (from client ap-test-ivan port 289 cli 000c.f135.f1ba) Sending Access-Accept of id 95 to 192.168.20.4 port 1645 MS-MPPE-Recv-Key = 0x0b16dbbed96d2863ebde1df32222e6a8930a6876e2ae7e2c85288ae313d2cdc1 MS-MPPE-Send-Key = 0x429669acf3e571f6fb7b6fbce51ef9bbb8cd9678885f5c52ab5355ce43727c9c EAP-Message = 0x030a0004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = "testradius" Finished request 9 Going to the next request Waking up in 6 seconds...

2 8

What printer [tested] for FreeRadius + WPA (EAP/TLS) WLAN network?
by Krzysztof Stelmach 17 May '06

17 May '06

Hello, I use FreeRadius with WPA (EAP/TLS) in my wireless network. Recently I was asked to select and buy wireless printer (with wireless print server built-in). And here is a problem: Does anybody know what printer supports WPA with EAP/TLS? I'm talking about models tested in WPA EAP/TLS-enabled WLAN network (we have HP DeskJet 5850 but it doesn't work - it's theoretically WPA-compatible, I can install certificates but it doesn't log to network, In WEP-only environment it works great). Regards, Krzysztof Stelmach

1 0

RE: getting Freeradius to recorde login failure, etc
by Jamal Taweel 17 May '06

17 May '06

You should write in PL/SQL the following: CREATE FUNCTION + the statements which they were sent. BR, -----Original Message----- From: freeradius-users-bounces+jamal.taweel=paltel.net(a)lists.freeradius.org [mailto:freeradius-users-bounces+jamal.taweel=paltel.net@lists.freeradiu s.org] On Behalf Of Jeremy ohara Sent: Wednesday, May 17, 2006 12:17 PM To: FreeRadius users mailing list Subject: RE: getting Freeradius to recorde login failure, etc Importance: High i done all but i'm lost where you have * Create a function in the database (called "fails"). The main statements which you should write are how do i do this? Jeremy -----Original Message----- From: "Jamal Taweel" <jamal.taweel(a)paltel.net> To: "FreeRadius users mailing list" <freeradius-users(a)lists.freeradius.org> Date: Wed, 17 May 2006 12:40:43 +0200 Subject: RE: getting Freeradius to recorde login failure, etc Hi Jeremy, In order to apply what wants, you should do the following: * Create a table in the radius schema (called "fails_log") to include three columns: trial_date, username, password. * Create a function in the database (called "fails"). The main statements which you should write are " fails ( username1 in out char, password1 in char) return char is v_user char:=''; v_password:=''; begin select username , value into v_user from radcheck where attribute='password' and username= username1 and password=password1; if v_user = '' then insert into fails_log values (sysdate,username1,password1); else return v_user; end if; end; " * Update authorize_ceck_query module in sql.conf file to be as follows: authorize_check_query = "SELECT id,Username,Attribute,Value,op FROM ${authcheck_table} WHERE Username =(select fails('%{SQL-User-Name}','%{Use r-Password}') from dual) ORDER BY id" That is all. Then you can find all failed logs inside the new created table fails_log. Best Regards, Jamal -----Original Message----- From: freeradius-users-bounces+jamal.taweel=paltel.net(a)lists.freeradius.org [mailto:freeradius-users-bounces+jamal.taweel=paltel.net@lists.freeradiu s.org] On Behalf Of Jeremy ohara Sent: Wednesday, May 17, 2006 6:32 AM To: FreeRadius users mailing list Subject: Re: getting Freeradius to recorde login failure, etc Hi there i dont want to sound rude, etc but your not really answering my question. you only answered half of it what do i wite for the sql statement, etc Jeremy -----Original Message----- From: "Duane Cox" <duanec(a)mail.illicom.net> To: "FreeRadius users mailing list" <freeradius-users(a)lists.freeradius.org> Date: Tue, 16 May 2006 22:28:12 -0500 Subject: Re: getting Freeradius to recorde login failure, etc post-auth { # # If you want to have a log of authentication replies, # un-comment the following line, and the 'detail reply_log' # section, above. # reply_log sql Post-Auth-Type REJECT { sql } } ----- Original Message ----- From: Jeremy ohara <mailto:Admin@jemisp.com> To: FreeRadius users mailing list <mailto:freeradius-users@lists.freeradius.org> Sent: Tuesday, May 16, 2006 9:13 PM Subject: Re: getting Freeradius to recorde login failure, etc where and how do i do it and what do i write??? jeremy -----Original Message----- From: "Duane Cox" <duanec(a)mail.illicom.net> To: "FreeRadius users mailing list" < freeradius-users(a)lists.freeradius.org <mailto:freeradius-users@lists.freeradius.org> > Date: Tue, 16 May 2006 18:17:26 -0500 Subject: Re: getting Freeradius to recorde login failure, etc yes, there is a subsection under the post_auth section for such a thing... ----- Original Message ----- From: Jeremy ohara <mailto:Admin@jemisp.com> To: FreeRadius users mailing list <mailto:freeradius-users@lists.freeradius.org> Sent: Tuesday, May 16, 2006 3:24 PM Subject: getting Freeradius to recorde login failure, etc hi there is there a way to get Freeradius 1.0.5 with Mysql to record login-failure, incorrect password or incorrect username into the mysql table? i can see its possbile. but when you login with wrong details it doesnt get to record the login failure, etc. and i dont knwo what code to use and how to make freeradius to record it Jeremy ------------------------------------------------------------------------ ---- This email has been scanned for Virus by MDaemon AntiVirus part of MDaemon. Updated daily to keep up-to-date with all new and old viruses. ------------------------------------------------------------------------ ---- _____ - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html ------------------------------------------------------------------------ ---- This email has been scanned for Virus by MDaemon AntiVirus part of MDaemon. Updated daily to keep up-to-date with all new and old viruses. ------------------------------------------------------------------------ ---- _____ - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html ------------------------------------------------------------------------ ---- This email has been scanned for Virus by MDaemon AntiVirus part of MDaemon. Updated daily to keep up-to-date with all new and old viruses. ------------------------------------------------------------------------ ---- ------------------------------------------------------------------------ ---- This email has been scanned for Virus by MDaemon AntiVirus part of MDaemon. Updated daily to keep up-to-date with all new and old viruses. ------------------------------------------------------------------------ ----

2 2

adding field to dialup_admin
by David Antognini 17 May '06

17 May '06

Hi Guys, I want to add the attribute WISPr-Bandwidth-Max-Down to the user "edit" page in dialup_admin. I added "WISPr-Bandwidth-Max-Down" to the bottom of the user_edit.attrs file. Then I manually went in and added the attribute into the radreply table and it works fine, and in dialup admin I can see the values, but when I go to edit the values, it doesn't work...Any tips on how to get this working? Dave

2 1

RE: getting Freeradius to recorde login failure, etc
by Jamal Taweel 17 May '06

17 May '06

Hi Jeremy, In order to apply what wants, you should do the following: * Create a table in the radius schema (called "fails_log") to include three columns: trial_date, username, password. * Create a function in the database (called "fails"). The main statements which you should write are " fails ( username1 in out char, password1 in char) return char is v_user char:=''; v_password:=''; begin select username , value into v_user from radcheck where attribute='password' and username= username1 and password=password1; if v_user = '' then insert into fails_log values (sysdate,username1,password1); else return v_user; end if; end; " * Update authorize_ceck_query module in sql.conf file to be as follows: authorize_check_query = "SELECT id,Username,Attribute,Value,op FROM ${authcheck_table} WHERE Username =(select fails('%{SQL-User-Name}','%{Use r-Password}') from dual) ORDER BY id" That is all. Then you can find all failed logs inside the new created table fails_log. Best Regards, Jamal -----Original Message----- From: freeradius-users-bounces+jamal.taweel=paltel.net(a)lists.freeradius.org [mailto:freeradius-users-bounces+jamal.taweel=paltel.net@lists.freeradiu s.org] On Behalf Of Jeremy ohara Sent: Wednesday, May 17, 2006 6:32 AM To: FreeRadius users mailing list Subject: Re: getting Freeradius to recorde login failure, etc Hi there i dont want to sound rude, etc but your not really answering my question. you only answered half of it what do i wite for the sql statement, etc Jeremy -----Original Message----- From: "Duane Cox" <duanec(a)mail.illicom.net> To: "FreeRadius users mailing list" <freeradius-users(a)lists.freeradius.org> Date: Tue, 16 May 2006 22:28:12 -0500 Subject: Re: getting Freeradius to recorde login failure, etc post-auth { # # If you want to have a log of authentication replies, # un-comment the following line, and the 'detail reply_log' # section, above. # reply_log sql Post-Auth-Type REJECT { sql } } ----- Original Message ----- From: Jeremy ohara <mailto:Admin@jemisp.com> To: FreeRadius users mailing list <mailto:freeradius-users@lists.freeradius.org> Sent: Tuesday, May 16, 2006 9:13 PM Subject: Re: getting Freeradius to recorde login failure, etc where and how do i do it and what do i write??? jeremy -----Original Message----- From: "Duane Cox" <duanec(a)mail.illicom.net> To: "FreeRadius users mailing list" < freeradius-users(a)lists.freeradius.org <mailto:freeradius-users@lists.freeradius.org> > Date: Tue, 16 May 2006 18:17:26 -0500 Subject: Re: getting Freeradius to recorde login failure, etc yes, there is a subsection under the post_auth section for such a thing... ----- Original Message ----- From: Jeremy ohara <mailto:Admin@jemisp.com> To: FreeRadius users mailing list <mailto:freeradius-users@lists.freeradius.org> Sent: Tuesday, May 16, 2006 3:24 PM Subject: getting Freeradius to recorde login failure, etc hi there is there a way to get Freeradius 1.0.5 with Mysql to record login-failure, incorrect password or incorrect username into the mysql table? i can see its possbile. but when you login with wrong details it doesnt get to record the login failure, etc. and i dont knwo what code to use and how to make freeradius to record it Jeremy ------------------------------------------------------------------------ ---- This email has been scanned for Virus by MDaemon AntiVirus part of MDaemon. Updated daily to keep up-to-date with all new and old viruses. ------------------------------------------------------------------------ ---- _____ - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html ------------------------------------------------------------------------ ---- This email has been scanned for Virus by MDaemon AntiVirus part of MDaemon. Updated daily to keep up-to-date with all new and old viruses. ------------------------------------------------------------------------ ---- _____ - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html ------------------------------------------------------------------------ ---- This email has been scanned for Virus by MDaemon AntiVirus part of MDaemon. Updated daily to keep up-to-date with all new and old viruses. ------------------------------------------------------------------------ ----

2 1

Syntax Error
by Lakshmi Jayaraman 17 May '06

17 May '06

Hi, I am using the latest version of freeRadius. The version is 1.1.1. When I try to run the server it gives a lot of syntax error. Kindly let me know how to proceed with the same. Thanks Lakshmi The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s)and may contain confidential or privileged information. If you are not the intended recipient, please notify the sender or administrator(a)tataelxsi.co.in

2 1