- Freeradius-Users - lists.freeradius.org

Re: How to configure non-priveleged LDAP bind in FreeRADIUS 3.0.11
by Kev Xlr 23 Jul '19

23 Jul '19

I know this is an old thread, but I am attempting to configure the same scenario in Freeradius. The backend database is Azure AD DS with LDAPS enabled, and the goal is to have EAP-TTLS/PAP for wifi access points. Obviously passwords are not in cleartext so users should be authenticated by a simple LDAP bind by the rlm_ldap module. I added Alan’s if statement to default and inner-tunnel to force Auth-Type LDAP but am still getting the error No Auth-Type Found. It doesn’t look like the given credentials are tested with an LDAP bind. Any specific config or documentation to investigate would be appreciated See the below log of a request from wifi client. FreeRADIUS Version 3.0.19 Copyright (C) 1999-2019 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/local/Cellar/freeradius-server/3.0.19/share/freeradius/dictionary including dictionary file /usr/local/Cellar/freeradius-server/3.0.19/share/freeradius/dictionary.dhcp including dictionary file /usr/local/Cellar/freeradius-server/3.0.19/share/freeradius/dictionary.vqp including dictionary file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/dictionary including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/radiusd.conf including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/proxy.conf including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/clients.conf including files in directory /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/ including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/always including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/attr_filter including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/cache_eap including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/chap including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/date including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/detail including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/detail.log including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/digest including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/dynamic_clients including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/eap including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/echo including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/exec including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/expiration including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/expr including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/files including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/ldap including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/linelog including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/logintime including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/mschap including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/ntlm_auth including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/pap including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/passwd including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/preprocess including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/radutmp including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/realm including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/replicate including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/soh including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/sradutmp including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/unix including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/unpack including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/utf8 including files in directory /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/policy.d/ including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/policy.d/abfab-tr including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/policy.d/accounting including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/policy.d/canonicalization including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/policy.d/control including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/policy.d/cui including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/policy.d/debug including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/policy.d/dhcp including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/policy.d/eap including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/policy.d/filter including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/policy.d/moonshot-targeted-ids including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/policy.d/operator-name including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/policy.d/rfc7542 including files in directory /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/ including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/default including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/inner-tunnel main { name = "radiusd" prefix = "/usr/local/Cellar/freeradius-server/3.0.19" localstatedir = "/usr/local/var" sbindir = "/usr/local/Cellar/freeradius-server/3.0.19/bin" logdir = "/usr/local/var/log/radius" run_dir = "/usr/local/var/run/radiusd" libdir = "/usr/local/Cellar/freeradius-server/3.0.19/lib" radacctdir = "/usr/local/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/usr/local/var/run/radiusd/radiusd.pid" checkrad = "/usr/local/Cellar/freeradius-server/3.0.19/bin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes allow_vulnerable_openssl = "no" } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client dynamic { ipaddr = 10.11.0.0/16 require_message_authenticator = no secret = <<< secret >>> proto = "*" limit { max_connections = 0 lifetime = 0 idle_timeout = 30 } } client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = ldap # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_always # Loading module "reject" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_cache # Loading module "cache_eap" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_chap # Loading module "chap" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/chap # Loaded module rlm_date # Loading module "date" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" utc = no } # Loading module "wispr2date" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/date date wispr2date { format = "%Y-%m-%dT%H:%M:%S" utc = no } # Loaded module rlm_detail # Loading module "detail" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/detail detail { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "auth_log" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_digest # Loading module "digest" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/digest # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_eap # Loading module "eap" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_exec # Loading module "echo" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loading module "exec" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_expiration # Loading module "expiration" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/expiration # Loaded module rlm_expr # Loading module "expr" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_files # Loading module "files" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/files files { filename = "/usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-config/files/authorize" acctusersfile = "/usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-config/files/pre-proxy" } # Loaded module rlm_ldap # Loading module "ldap" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/ldap ldap { server = "ldaps.domain.ca" port = 636 identity = "ldaps(a)domain.ca" password = <<< secret >>> sasl { } user_dn = "LDAP-UserDn" user { scope = "sub" access_positive = yes sasl { } } group { filter = "(objectClass=posixGroup)" scope = "sub" name_attribute = "cn" membership_attribute = "memberOf" cacheable_name = no cacheable_dn = no } client { filter = "(objectClass=radiusClient)" scope = "sub" base_dn = "OU=AADDC Users,DC=domain,DC=ca" } profile { } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 1 res_timeout = 10 srv_timelimit = 3 idle = 60 probes = 3 interval = 3 } tls { start_tls = no } } Creating attribute LDAP-Group # Loaded module rlm_linelog # Loading module "linelog" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/linelog linelog { filename = "/usr/local/var/log/radius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/usr/local/var/log/radius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_logintime # Loading module "logintime" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_mschap # Loading module "mschap" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no use_open_directory = yes } # Loading module "ntlm_auth" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_pap # Loading module "pap" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_preprocess # Loading module "preprocess" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-config/preprocess/huntgroups" hints = "/usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_radutmp # Loading module "radutmp" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/radutmp radutmp { filename = "/usr/local/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_realm # Loading module "IPASS" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "bangpath" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/realm realm bangpath { format = "prefix" delimiter = "!" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_replicate # Loading module "replicate" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/replicate # Loaded module rlm_soh # Loading module "soh" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/soh soh { dhcp = yes } # Loading module "sradutmp" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/usr/local/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_unix # Loading module "unix" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/unix unix { radwtmp = "/usr/local/var/log/radius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_unpack # Loading module "unpack" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/unpack # Loaded module rlm_utf8 # Loading module "utf8" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/utf8 instantiate { } # Instantiating module "reject" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/always # Instantiating module "fail" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/always # Instantiating module "ok" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/always # Instantiating module "handled" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/always # Instantiating module "invalid" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/always # Instantiating module "userlock" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/always # Instantiating module "notfound" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/always # Instantiating module "noop" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/always # Instantiating module "updated" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/always # Instantiating module "attr_filter.post-proxy" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-config/attr_filter/accounting_response # Instantiating module "cache_eap" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "detail" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/detail # Instantiating module "auth_log" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/detail.log # Instantiating module "eap" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/certs" pem_file_type = yes private_key_file = "/usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/certs/server.pem" certificate_file = "/usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/certs/server.pem" ca_file = "/usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" tls_max_version = "" tls_min_version = "1.0" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "expiration" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/expiration # Instantiating module "files" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/files reading pairlist file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-config/files/authorize reading pairlist file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-config/files/accounting reading pairlist file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-config/files/pre-proxy # Instantiating module "ldap" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/ldap rlm_ldap: libldap vendor: OpenLDAP, version: 20428 accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } rlm_ldap (ldap): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldap://ldaps.domain.ca:636 TLS: during handshake: peer cert is valid, or was ignored if verification disabled (-9841) TLS: during handshake: Peer certificate is trusted TLS: TLSv1.2 session established using 256-bit TLS_RSA_WITH_AES_256_GCM_SHA384 cipher rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots used rlm_ldap (ldap): Connecting to ldap://ldaps.domain.ca:636 TLS: during handshake: peer cert is valid, or was ignored if verification disabled (-9841) TLS: during handshake: Peer certificate is trusted TLS: TLSv1.2 session established using 256-bit TLS_RSA_WITH_AES_256_GCM_SHA384 cipher rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots used rlm_ldap (ldap): Connecting to ldap://ldaps.domain.ca:636 TLS: during handshake: peer cert is valid, or was ignored if verification disabled (-9841) TLS: during handshake: Peer certificate is trusted TLS: TLSv1.2 session established using 256-bit TLS_RSA_WITH_AES_256_GCM_SHA384 cipher rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots used rlm_ldap (ldap): Connecting to ldap://ldaps.domain.ca:636 TLS: during handshake: peer cert is valid, or was ignored if verification disabled (-9841) TLS: during handshake: Peer certificate is trusted TLS: TLSv1.2 session established using 256-bit TLS_RSA_WITH_AES_256_GCM_SHA384 cipher rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots used rlm_ldap (ldap): Connecting to ldap://ldaps.domain.ca:636 TLS: during handshake: peer cert is valid, or was ignored if verification disabled (-9841) TLS: during handshake: Peer certificate is trusted TLS: TLSv1.2 session established using 256-bit TLS_RSA_WITH_AES_256_GCM_SHA384 cipher rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful # Instantiating module "linelog" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/linelog # Instantiating module "log_accounting" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/linelog # Instantiating module "logintime" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/logintime # Instantiating module "mschap" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "pap" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/pap # Instantiating module "etc_passwd" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "preprocess" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/preprocess reading pairlist file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-config/preprocess/hints # Instantiating module "IPASS" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/realm # Instantiating module "suffix" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/realm # Instantiating module "bangpath" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/realm # Instantiating module "realmpercent" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/realm # Instantiating module "ntdomain" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/realm } # modules radiusd: #### Loading Virtual Servers #### server { # from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/radiusd.conf } # server server default { # from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default server inner-tunnel { # from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/inner-tunnel:341 } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = 10.11.12.62 port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address 10.11.12.62 port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on proxy address * port 63972 Listening on proxy address :: port 63973 Ready to process requests (0) Received Access-Request Id 55 from 10.11.12.207:59118 to 10.11.12.62:1812 length 191 (0) User-Name = "ldaps(a)domain.ca" (0) NAS-IP-Address = 10.11.12.207 (0) NAS-Port = 736 (0) Called-Station-Id = "50-60-28-5A-23-F7:RADIUS" (0) Calling-Station-Id = "5C-F7-E6-30-B3-2E" (0) Framed-MTU = 1400 (0) NAS-Port-Type = Wireless-802.11 (0) Connect-Info = "CONNECT 6Mbps/6Mbps 802.11a" (0) EAP-Message = 0x0200001c016c64617073406b696e677363687269737469616e2e6361 (0) Message-Authenticator = 0x5fc7a5fa4f247c8d85cda267b269d910 (0) # Executing section authorize from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: Looking up realm "domain.ca" for User-Name = "ldaps(a)domain.ca" (0) suffix: No such realm "domain.ca" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 0 length 28 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_md5 to process data (0) eap_md5: Issuing MD5 Challenge (0) eap: Sending EAP Request (code 1) ID 1 length 22 (0) eap: EAP session adding &reply:State = 0x82acad7c82ada94f (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) # Executing group from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/default (0) Challenge { ... } # empty sub-section is ignored (0) Sent Access-Challenge Id 55 from 10.11.12.62:1812 to 10.11.12.207:59118 length 0 (0) EAP-Message = 0x010100160410323dc8ee4193e3228d24f6b415a22dd0 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0x82acad7c82ada94f1bfb0011896e6929 (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 56 from 10.11.12.207:59118 to 10.11.12.62:1812 length 189 (1) User-Name = "ldaps(a)domain.ca" (1) NAS-IP-Address = 10.11.12.207 (1) NAS-Port = 736 (1) Called-Station-Id = "50-60-28-5A-23-F7:RADIUS" (1) Calling-Station-Id = "5C-F7-E6-30-B3-2E" (1) Framed-MTU = 1400 (1) NAS-Port-Type = Wireless-802.11 (1) Connect-Info = "CONNECT 6Mbps/6Mbps 802.11a" (1) EAP-Message = 0x020100080319152b (1) State = 0x82acad7c82ada94f1bfb0011896e6929 (1) Message-Authenticator = 0xfa1fa3aebbe14b2929e9aff5fc492fea (1) session-state: No cached attributes (1) # Executing section authorize from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /(a)\./) { (1) if (&User-Name =~ /(a)\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: Looking up realm "domain.ca" for User-Name = "ldaps(a)domain.ca" (1) suffix: No such realm "domain.ca" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 1 length 8 (1) eap: No EAP Start, assuming it's an on-going EAP conversation (1) [eap] = updated (1) [files] = noop rlm_ldap (ldap): Reserved connection (0) (1) ldap: EXPAND (userPrincipalName=%{%{Stripped-User-Name}:-%{User-Name}}) (1) ldap: --> (userPrincipalName=ldaps(a)domain.ca) (1) ldap: Performing search in "OU=AADDC Users,DC=domain,DC=ca" with filter "(userPrincipalName=ldaps(a)domain.ca)", scope "sub" (1) ldap: Waiting for search result... (1) ldap: User object found at DN "CN=LDAPS,OU=AADDC Users,DC=domain,DC=ca" (1) ldap: Processing user attributes (1) ldap: WARNING: No "known good" password added. Ensure the admin user has permission to read the password attribute (1) ldap: WARNING: PAP authentication will *NOT* work with Active Directory (if that is what you were trying to configure) rlm_ldap (ldap): Released connection (0) Need 5 more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots used rlm_ldap (ldap): Connecting to ldap://ldaps.domain.ca:636 TLS: during handshake: peer cert is valid, or was ignored if verification disabled (-9841) TLS: during handshake: Peer certificate is trusted TLS: TLSv1.2 session established using 256-bit TLS_RSA_WITH_AES_256_GCM_SHA384 cipher rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (1) [ldap] = ok (1) [expiration] = noop (1) [logintime] = noop Not doing PAP as Auth-Type is already set. (1) [pap] = noop (1) if (noop && User-Password) { (1) if (noop && User-Password) -> FALSE (1) } # authorize = updated (1) Found Auth-Type = eap (1) # Executing group from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0x82acad7c82ada94f (1) eap: Finished EAP session with state 0x82acad7c82ada94f (1) eap: Previous EAP request found for state 0x82acad7c82ada94f, released from the list (1) eap: Peer sent packet with method EAP NAK (3) (1) eap: Found mutually acceptable type PEAP (25) (1) eap: Calling submodule eap_peap to process data (1) eap_peap: Initiating new TLS session (1) eap_peap: [eaptls start] = request (1) eap: Sending EAP Request (code 1) ID 2 length 6 (1) eap: EAP session adding &reply:State = 0x82acad7c83aeb44f (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) # Executing group from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/default (1) Challenge { ... } # empty sub-section is ignored (1) Sent Access-Challenge Id 56 from 10.11.12.62:1812 to 10.11.12.207:59118 length 0 (1) EAP-Message = 0x010200061920 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0x82acad7c83aeb44f1bfb0011896e6929 (1) Finished request Waking up in 4.9 seconds. (2) Received Access-Request Id 57 from 10.11.12.207:59118 to 10.11.12.62:1812 length 342 (2) User-Name = "ldaps(a)domain.ca" (2) NAS-IP-Address = 10.11.12.207 (2) NAS-Port = 736 (2) Called-Station-Id = "50-60-28-5A-23-F7:RADIUS" (2) Calling-Station-Id = "5C-F7-E6-30-B3-2E" (2) Framed-MTU = 1400 (2) NAS-Port-Type = Wireless-802.11 (2) Connect-Info = "CONNECT 6Mbps/6Mbps 802.11a" (2) EAP-Message = 0x020200a119800000009716030100920100008e03035d3752bc4dd01f70ca7820c44591b0838514535fffba5a0e22a3ad100cc0e73400002c00ffc02cc02bc024c023c00ac009c008c030c02fc028c027c014c013c012009d009c003d003c0035002f000a01000039000a00080006001700180019000b00020100000d00120010040102010501060104030203050306030005000501000000000012000000170000 (2) State = 0x82acad7c83aeb44f1bfb0011896e6929 (2) Message-Authenticator = 0xd96f97654989472c63ccdc9127008329 (2) session-state: No cached attributes (2) # Executing section authorize from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /(a)\./) { (2) if (&User-Name =~ /(a)\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: Looking up realm "domain.ca" for User-Name = "ldaps(a)domain.ca" (2) suffix: No such realm "domain.ca" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 2 length 161 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = eap (2) # Executing group from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0x82acad7c83aeb44f (2) eap: Finished EAP session with state 0x82acad7c83aeb44f (2) eap: Previous EAP request found for state 0x82acad7c83aeb44f, released from the list (2) eap: Peer sent packet with method EAP PEAP (25) (2) eap: Calling submodule eap_peap to process data (2) eap_peap: Continuing EAP-TLS (2) eap_peap: Peer indicated complete TLS record size will be 151 bytes (2) eap_peap: Got complete TLS record (151 bytes) (2) eap_peap: [eaptls verify] = length included (2) eap_peap: (other): before/accept initialization (2) eap_peap: TLS_accept: before/accept initialization (2) eap_peap: <<< recv TLS 1.2 [length 0092] (2) eap_peap: TLS_accept: unknown state (2) eap_peap: >>> send TLS 1.2 [length 0039] (2) eap_peap: TLS_accept: unknown state (2) eap_peap: >>> send TLS 1.2 [length 08d3] (2) eap_peap: TLS_accept: unknown state (2) eap_peap: >>> send TLS 1.2 [length 014d] (2) eap_peap: TLS_accept: unknown state (2) eap_peap: >>> send TLS 1.2 [length 0004] (2) eap_peap: TLS_accept: unknown state (2) eap_peap: TLS_accept: unknown state (2) eap_peap: TLS_accept: unknown state (2) eap_peap: TLS_accept: Need to read more data: unknown state (2) eap_peap: TLS_accept: Need to read more data: unknown state (2) eap_peap: TLS - In Handshake Phase (2) eap_peap: TLS - got 2673 bytes of data (2) eap_peap: [eaptls process] = handled (2) eap: Sending EAP Request (code 1) ID 3 length 1004 (2) eap: EAP session adding &reply:State = 0x82acad7c80afb44f (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) # Executing group from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/default (2) Challenge { ... } # empty sub-section is ignored (2) Sent Access-Challenge Id 57 from 10.11.12.62:1812 to 10.11.12.207:59118 length 0 (2) EAP-Message = 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 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0x82acad7c80afb44f1bfb0011896e6929 (2) Finished request Waking up in 4.8 seconds. (3) Received Access-Request Id 58 from 10.11.12.207:59118 to 10.11.12.62:1812 length 187 (3) User-Name = "ldaps(a)domain.ca" (3) NAS-IP-Address = 10.11.12.207 (3) NAS-Port = 736 (3) Called-Station-Id = "50-60-28-5A-23-F7:RADIUS" (3) Calling-Station-Id = "5C-F7-E6-30-B3-2E" (3) Framed-MTU = 1400 (3) NAS-Port-Type = Wireless-802.11 (3) Connect-Info = "CONNECT 6Mbps/6Mbps 802.11a" (3) EAP-Message = 0x020300061900 (3) State = 0x82acad7c80afb44f1bfb0011896e6929 (3) Message-Authenticator = 0xe79738b873d0b96b0e6dd1bc3c3fa9e2 (3) session-state: No cached attributes (3) # Executing section authorize from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /(a)\./) { (3) if (&User-Name =~ /(a)\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: Looking up realm "domain.ca" for User-Name = "ldaps(a)domain.ca" (3) suffix: No such realm "domain.ca" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 3 length 6 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0x82acad7c80afb44f (3) eap: Finished EAP session with state 0x82acad7c80afb44f (3) eap: Previous EAP request found for state 0x82acad7c80afb44f, released from the list (3) eap: Peer sent packet with method EAP PEAP (25) (3) eap: Calling submodule eap_peap to process data (3) eap_peap: Continuing EAP-TLS (3) eap_peap: Peer ACKed our handshake fragment (3) eap_peap: [eaptls verify] = request (3) eap_peap: [eaptls process] = handled (3) eap: Sending EAP Request (code 1) ID 4 length 1000 (3) eap: EAP session adding &reply:State = 0x82acad7c81a8b44f (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) # Executing group from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/default (3) Challenge { ... } # empty sub-section is ignored (3) Sent Access-Challenge Id 58 from 10.11.12.62:1812 to 10.11.12.207:59118 length 0 (3) EAP-Message = 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 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0x82acad7c81a8b44f1bfb0011896e6929 (3) Finished request Waking up in 4.7 seconds. (4) Received Access-Request Id 59 from 10.11.12.207:59118 to 10.11.12.62:1812 length 187 (4) User-Name = "ldaps(a)domain.ca" (4) NAS-IP-Address = 10.11.12.207 (4) NAS-Port = 736 (4) Called-Station-Id = "50-60-28-5A-23-F7:RADIUS" (4) Calling-Station-Id = "5C-F7-E6-30-B3-2E" (4) Framed-MTU = 1400 (4) NAS-Port-Type = Wireless-802.11 (4) Connect-Info = "CONNECT 6Mbps/6Mbps 802.11a" (4) EAP-Message = 0x020400061900 (4) State = 0x82acad7c81a8b44f1bfb0011896e6929 (4) Message-Authenticator = 0xb084d992c649b97a05c97fdfb2f62a20 (4) session-state: No cached attributes (4) # Executing section authorize from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/default (4) authorize { (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /(a)\./) { (4) if (&User-Name =~ /(a)\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: Looking up realm "domain.ca" for User-Name = "ldaps(a)domain.ca" (4) suffix: No such realm "domain.ca" (4) [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 4 length 6 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0x82acad7c81a8b44f (4) eap: Finished EAP session with state 0x82acad7c81a8b44f (4) eap: Previous EAP request found for state 0x82acad7c81a8b44f, released from the list (4) eap: Peer sent packet with method EAP PEAP (25) (4) eap: Calling submodule eap_peap to process data (4) eap_peap: Continuing EAP-TLS (4) eap_peap: Peer ACKed our handshake fragment (4) eap_peap: [eaptls verify] = request (4) eap_peap: [eaptls process] = handled (4) eap: Sending EAP Request (code 1) ID 5 length 691 (4) eap: EAP session adding &reply:State = 0x82acad7c86a9b44f (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) # Executing group from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/default (4) Challenge { ... } # empty sub-section is ignored (4) Sent Access-Challenge Id 59 from 10.11.12.62:1812 to 10.11.12.207:59118 length 0 (4) EAP-Message = 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 (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0x82acad7c86a9b44f1bfb0011896e6929 (4) Finished request Waking up in 4.7 seconds. (5) Received Access-Request Id 60 from 10.11.12.207:59118 to 10.11.12.62:1812 length 317 (5) User-Name = "ldaps(a)domain.ca" (5) NAS-IP-Address = 10.11.12.207 (5) NAS-Port = 736 (5) Called-Station-Id = "50-60-28-5A-23-F7:RADIUS" (5) Calling-Station-Id = "5C-F7-E6-30-B3-2E" (5) Framed-MTU = 1400 (5) NAS-Port-Type = Wireless-802.11 (5) Connect-Info = "CONNECT 6Mbps/6Mbps 802.11a" (5) EAP-Message = 0x0205008819800000007e16030300461000004241044e2a5405204c749624ab5743557771b8894447e81ab936ac1105631fdcaba7312ab78292caaa799084eb74031555a236f5b538768cfe422432a179f8b0e4e0161403030001011603030028e55213cc96d61f81d907a32a1ce9327ae5a6d68702b6e3af3fd834369983c644795ada796dc5738f (5) State = 0x82acad7c86a9b44f1bfb0011896e6929 (5) Message-Authenticator = 0xd83517b1c089a67af74981323141225b (5) session-state: No cached attributes (5) # Executing section authorize from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/default (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /(a)\./) { (5) if (&User-Name =~ /(a)\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) [chap] = noop (5) [mschap] = noop (5) [digest] = noop (5) suffix: Checking for suffix after "@" (5) suffix: Looking up realm "domain.ca" for User-Name = "ldaps(a)domain.ca" (5) suffix: No such realm "domain.ca" (5) [suffix] = noop (5) eap: Peer sent EAP Response (code 2) ID 5 length 136 (5) eap: Continuing tunnel setup (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0x82acad7c86a9b44f (5) eap: Finished EAP session with state 0x82acad7c86a9b44f (5) eap: Previous EAP request found for state 0x82acad7c86a9b44f, released from the list (5) eap: Peer sent packet with method EAP PEAP (25) (5) eap: Calling submodule eap_peap to process data (5) eap_peap: Continuing EAP-TLS (5) eap_peap: Peer indicated complete TLS record size will be 126 bytes (5) eap_peap: Got complete TLS record (126 bytes) (5) eap_peap: [eaptls verify] = length included (5) eap_peap: <<< recv TLS 1.2 [length 0046] (5) eap_peap: TLS_accept: unknown state (5) eap_peap: TLS_accept: unknown state (5) eap_peap: <<< recv TLS 1.2 [length 0001] (5) eap_peap: <<< recv TLS 1.2 [length 0010] (5) eap_peap: TLS_accept: unknown state (5) eap_peap: >>> send TLS 1.2 [length 0001] (5) eap_peap: TLS_accept: unknown state (5) eap_peap: >>> send TLS 1.2 [length 0010] (5) eap_peap: TLS_accept: unknown state (5) eap_peap: TLS_accept: unknown state (5) eap_peap: (other): SSL negotiation finished successfully (5) eap_peap: TLS - Connection Established (5) eap_peap: TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (5) eap_peap: TLS-Session-Version = "TLS 1.2" (5) eap_peap: TLS - got 51 bytes of data (5) eap_peap: [eaptls process] = handled (5) eap: Sending EAP Request (code 1) ID 6 length 57 (5) eap: EAP session adding &reply:State = 0x82acad7c87aab44f (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) # Executing group from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/default (5) Challenge { ... } # empty sub-section is ignored (5) session-state: Saving cached attributes (5) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (5) TLS-Session-Version = "TLS 1.2" (5) Sent Access-Challenge Id 60 from 10.11.12.62:1812 to 10.11.12.207:59118 length 0 (5) EAP-Message = 0x0106003919001403030001011603030028e0cda00b6a448a56ed39cd795dbd504f1b7ed97f26645577169999a2a82878b014797a35667560d6 (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0x82acad7c87aab44f1bfb0011896e6929 (5) Finished request Waking up in 4.7 seconds. (6) Received Access-Request Id 61 from 10.11.12.207:59118 to 10.11.12.62:1812 length 187 (6) User-Name = "ldaps(a)domain.ca" (6) NAS-IP-Address = 10.11.12.207 (6) NAS-Port = 736 (6) Called-Station-Id = "50-60-28-5A-23-F7:RADIUS" (6) Calling-Station-Id = "5C-F7-E6-30-B3-2E" (6) Framed-MTU = 1400 (6) NAS-Port-Type = Wireless-802.11 (6) Connect-Info = "CONNECT 6Mbps/6Mbps 802.11a" (6) EAP-Message = 0x020600061900 (6) State = 0x82acad7c87aab44f1bfb0011896e6929 (6) Message-Authenticator = 0x640d37eed321b5aa62c0e07e2618caff (6) Restoring &session-state (6) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (6) &session-state:TLS-Session-Version = "TLS 1.2" (6) # Executing section authorize from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/default (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /(a)\./) { (6) if (&User-Name =~ /(a)\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [preprocess] = ok (6) [chap] = noop (6) [mschap] = noop (6) [digest] = noop (6) suffix: Checking for suffix after "@" (6) suffix: Looking up realm "domain.ca" for User-Name = "ldaps(a)domain.ca" (6) suffix: No such realm "domain.ca" (6) [suffix] = noop (6) eap: Peer sent EAP Response (code 2) ID 6 length 6 (6) eap: Continuing tunnel setup (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/default (6) authenticate { (6) eap: Expiring EAP session with state 0x82acad7c87aab44f (6) eap: Finished EAP session with state 0x82acad7c87aab44f (6) eap: Previous EAP request found for state 0x82acad7c87aab44f, released from the list (6) eap: Peer sent packet with method EAP PEAP (25) (6) eap: Calling submodule eap_peap to process data (6) eap_peap: Continuing EAP-TLS (6) eap_peap: Peer ACKed our handshake fragment. handshake is finished (6) eap_peap: [eaptls verify] = success (6) eap_peap: [eaptls process] = success (6) eap_peap: Session established. Decoding tunneled attributes (6) eap_peap: PEAP state TUNNEL ESTABLISHED (6) eap: Sending EAP Request (code 1) ID 7 length 40 (6) eap: EAP session adding &reply:State = 0x82acad7c84abb44f (6) [eap] = handled (6) } # authenticate = handled (6) Using Post-Auth-Type Challenge (6) # Executing group from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/default (6) Challenge { ... } # empty sub-section is ignored (6) session-state: Saving cached attributes (6) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (6) TLS-Session-Version = "TLS 1.2" (6) Sent Access-Challenge Id 61 from 10.11.12.62:1812 to 10.11.12.207:59118 length 0 (6) EAP-Message = 0x010700281900170303001de0cda00b6a448a57f0cba2e144a2103493fda50453cc6de21c896c4b85 (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0x82acad7c84abb44f1bfb0011896e6929 (6) Finished request Waking up in 4.7 seconds. (7) Received Access-Request Id 62 from 10.11.12.207:59118 to 10.11.12.62:1812 length 240 (7) User-Name = "ldaps(a)domain.ca" (7) NAS-IP-Address = 10.11.12.207 (7) NAS-Port = 736 (7) Called-Station-Id = "50-60-28-5A-23-F7:RADIUS" (7) Calling-Station-Id = "5C-F7-E6-30-B3-2E" (7) Framed-MTU = 1400 (7) NAS-Port-Type = Wireless-802.11 (7) Connect-Info = "CONNECT 6Mbps/6Mbps 802.11a" (7) EAP-Message = 0x0207003b19001703030030e55213cc96d61f8273f8db4f99f175e3fac2195247dae9cca274fb3182542f50a5c4d6d5ac946e82d1bad337d66e8eff (7) State = 0x82acad7c84abb44f1bfb0011896e6929 (7) Message-Authenticator = 0x868a63fa3da822ea71589759443a8a06 (7) Restoring &session-state (7) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (7) &session-state:TLS-Session-Version = "TLS 1.2" (7) # Executing section authorize from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/default (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /(a)\./) { (7) if (&User-Name =~ /(a)\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [preprocess] = ok (7) [chap] = noop (7) [mschap] = noop (7) [digest] = noop (7) suffix: Checking for suffix after "@" (7) suffix: Looking up realm "domain.ca" for User-Name = "ldaps(a)domain.ca" (7) suffix: No such realm "domain.ca" (7) [suffix] = noop (7) eap: Peer sent EAP Response (code 2) ID 7 length 59 (7) eap: Continuing tunnel setup (7) [eap] = ok (7) } # authorize = ok (7) Found Auth-Type = eap (7) # Executing group from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/default (7) authenticate { (7) eap: Expiring EAP session with state 0x82acad7c84abb44f (7) eap: Finished EAP session with state 0x82acad7c84abb44f (7) eap: Previous EAP request found for state 0x82acad7c84abb44f, released from the list (7) eap: Peer sent packet with method EAP PEAP (25) (7) eap: Calling submodule eap_peap to process data (7) eap_peap: Continuing EAP-TLS (7) eap_peap: [eaptls verify] = ok (7) eap_peap: Done initial handshake (7) eap_peap: [eaptls process] = ok (7) eap_peap: Session established. Decoding tunneled attributes (7) eap_peap: PEAP state WAITING FOR INNER IDENTITY (7) eap_peap: Identity - ldaps(a)domain.ca (7) eap_peap: Got inner identity 'ldaps(a)domain.ca' (7) eap_peap: Setting default EAP type for tunneled EAP session (7) eap_peap: Got tunneled request (7) eap_peap: EAP-Message = 0x0207001c016c64617073406b696e677363687269737469616e2e6361 (7) eap_peap: Setting User-Name to ldaps(a)domain.ca (7) eap_peap: Sending tunneled request to inner-tunnel (7) eap_peap: EAP-Message = 0x0207001c016c64617073406b696e677363687269737469616e2e6361 (7) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (7) eap_peap: User-Name = "ldaps(a)domain.ca" (7) Virtual server inner-tunnel received request (7) EAP-Message = 0x0207001c016c64617073406b696e677363687269737469616e2e6361 (7) FreeRADIUS-Proxied-To = 127.0.0.1 (7) User-Name = "ldaps(a)domain.ca" (7) WARNING: Outer and inner identities are the same. User privacy is compromised. (7) server inner-tunnel { (7) # Executing section authorize from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/inner-tunnel (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /(a)\./) { (7) if (&User-Name =~ /(a)\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [chap] = noop (7) [mschap] = noop (7) suffix: Checking for suffix after "@" (7) suffix: Looking up realm "domain.ca" for User-Name = "ldaps(a)domain.ca" (7) suffix: No such realm "domain.ca" (7) [suffix] = noop (7) update control { (7) &Proxy-To-Realm := LOCAL (7) } # update control = noop (7) [files] = noop rlm_ldap (ldap): Reserved connection (1) (7) ldap: EXPAND (userPrincipalName=%{%{Stripped-User-Name}:-%{User-Name}}) (7) ldap: --> (userPrincipalName=ldaps(a)domain.ca) (7) ldap: Performing search in "OU=AADDC Users,DC=domain,DC=ca" with filter "(userPrincipalName=ldaps(a)domain.ca)", scope "sub" (7) ldap: Waiting for search result... (7) ldap: User object found at DN "CN=LDAPS,OU=AADDC Users,DC=domain,DC=ca" (7) ldap: Processing user attributes (7) ldap: WARNING: No "known good" password added. Ensure the admin user has permission to read the password attribute (7) ldap: WARNING: PAP authentication will *NOT* work with Active Directory (if that is what you were trying to configure) rlm_ldap (ldap): Released connection (1) (7) [ldap] = ok (7) [expiration] = noop (7) [logintime] = noop (7) [pap] = noop (7) if (noop && User-Password) { (7) if (noop && User-Password) -> FALSE (7) } # authorize = ok (7) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type = Reject (7) Failed to authenticate the user (7) Using Post-Auth-Type Reject (7) # Executing group from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/inner-tunnel (7) Post-Auth-Type REJECT { (7) attr_filter.access_reject: EXPAND %{User-Name} (7) attr_filter.access_reject: --> ldaps(a)domain.ca (7) attr_filter.access_reject: Matched entry DEFAULT at line 11 (7) [attr_filter.access_reject] = updated (7) update outer.session-state { (7) &Module-Failure-Message := &request:Module-Failure-Message -> 'No Auth-Type found: rejecting the user via Post-Auth-Type = Reject' (7) } # update outer.session-state = noop (7) } # Post-Auth-Type REJECT = updated (7) } # server inner-tunnel (7) Virtual server sending reply (7) eap_peap: Got tunneled reply code 3 (7) eap_peap: Got tunneled reply RADIUS code 3 (7) eap_peap: Tunneled authentication was rejected (7) eap_peap: FAILURE (7) eap: Sending EAP Request (code 1) ID 8 length 46 (7) eap: EAP session adding &reply:State = 0x82acad7c85a4b44f (7) [eap] = handled (7) } # authenticate = handled (7) Using Post-Auth-Type Challenge (7) # Executing group from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/default (7) Challenge { ... } # empty sub-section is ignored (7) session-state: Saving cached attributes (7) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (7) TLS-Session-Version = "TLS 1.2" (7) Module-Failure-Message := "No Auth-Type found: rejecting the user via Post-Auth-Type = Reject" (7) Sent Access-Challenge Id 62 from 10.11.12.62:1812 to 10.11.12.207:59118 length 0 (7) EAP-Message = 0x0108002e19001703030023e0cda00b6a448a58373ab699fedf00aa2c781b582a7df63ce8e090a5ad3c7a71069e29 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0x82acad7c85a4b44f1bfb0011896e6929 (7) Finished request Waking up in 4.7 seconds. (8) Received Access-Request Id 63 from 10.11.12.207:59118 to 10.11.12.62:1812 length 227 (8) User-Name = "ldaps(a)domain.ca" (8) NAS-IP-Address = 10.11.12.207 (8) NAS-Port = 736 (8) Called-Station-Id = "50-60-28-5A-23-F7:RADIUS" (8) Calling-Station-Id = "5C-F7-E6-30-B3-2E" (8) Framed-MTU = 1400 (8) NAS-Port-Type = Wireless-802.11 (8) Connect-Info = "CONNECT 6Mbps/6Mbps 802.11a" (8) EAP-Message = 0x0208002e19001703030023e55213cc96d61f8324ff2b4fdca0a00061bbed2c04d869f30da768cd9b19b1ecc9e6a7 (8) State = 0x82acad7c85a4b44f1bfb0011896e6929 (8) Message-Authenticator = 0x1e760f2cdb7366845fa2ce36101be0ed (8) Restoring &session-state (8) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (8) &session-state:TLS-Session-Version = "TLS 1.2" (8) &session-state:Module-Failure-Message := "No Auth-Type found: rejecting the user via Post-Auth-Type = Reject" (8) # Executing section authorize from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/default (8) authorize { (8) policy filter_username { (8) if (&User-Name) { (8) if (&User-Name) -> TRUE (8) if (&User-Name) { (8) if (&User-Name =~ / /) { (8) if (&User-Name =~ / /) -> FALSE (8) if (&User-Name =~ /@[^@]*@/ ) { (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (8) if (&User-Name =~ /\.\./ ) { (8) if (&User-Name =~ /\.\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\.$/) { (8) if (&User-Name =~ /\.$/) -> FALSE (8) if (&User-Name =~ /(a)\./) { (8) if (&User-Name =~ /(a)\./) -> FALSE (8) } # if (&User-Name) = notfound (8) } # policy filter_username = notfound (8) [preprocess] = ok (8) [chap] = noop (8) [mschap] = noop (8) [digest] = noop (8) suffix: Checking for suffix after "@" (8) suffix: Looking up realm "domain.ca" for User-Name = "ldaps(a)domain.ca" (8) suffix: No such realm "domain.ca" (8) [suffix] = noop (8) eap: Peer sent EAP Response (code 2) ID 8 length 46 (8) eap: Continuing tunnel setup (8) [eap] = ok (8) } # authorize = ok (8) Found Auth-Type = eap (8) # Executing group from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/default (8) authenticate { (8) eap: Expiring EAP session with state 0x82acad7c85a4b44f (8) eap: Finished EAP session with state 0x82acad7c85a4b44f (8) eap: Previous EAP request found for state 0x82acad7c85a4b44f, released from the list (8) eap: Peer sent packet with method EAP PEAP (25) (8) eap: Calling submodule eap_peap to process data (8) eap_peap: Continuing EAP-TLS (8) eap_peap: [eaptls verify] = ok (8) eap_peap: Done initial handshake (8) eap_peap: [eaptls process] = ok (8) eap_peap: Session established. Decoding tunneled attributes (8) eap_peap: PEAP state send tlv failure (8) eap_peap: Received EAP-TLV response (8) eap_peap: ERROR: The users session was previously rejected: returning reject (again.) (8) eap_peap: This means you need to read the PREVIOUS messages in the debug output (8) eap_peap: to find out the reason why the user was rejected (8) eap_peap: Look for "reject" or "fail". Those earlier messages will tell you (8) eap_peap: what went wrong, and how to fix the problem (8) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module failed (8) eap: Sending EAP Failure (code 4) ID 8 length 4 (8) eap: Failed in EAP select (8) [eap] = invalid (8) } # authenticate = invalid (8) Failed to authenticate the user (8) Using Post-Auth-Type Reject (8) # Executing group from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/default (8) Post-Auth-Type REJECT { (8) attr_filter.access_reject: EXPAND %{User-Name} (8) attr_filter.access_reject: --> ldaps(a)domain.ca (8) attr_filter.access_reject: Matched entry DEFAULT at line 11 (8) [attr_filter.access_reject] = updated (8) [eap] = noop (8) policy remove_reply_message_if_eap { (8) if (&reply:EAP-Message && &reply:Reply-Message) { (8) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (8) else { (8) [noop] = noop (8) } # else = noop (8) } # policy remove_reply_message_if_eap = noop (8) } # Post-Auth-Type REJECT = updated (8) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (8) Sending delayed response (8) Sent Access-Reject Id 63 from 10.11.12.62:1812 to 10.11.12.207:59118 length 44 (8) EAP-Message = 0x04080004 (8) Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.7 seconds. (0) Cleaning up request packet ID 55 with timestamp +16 (1) Cleaning up request packet ID 56 with timestamp +16 (2) Cleaning up request packet ID 57 with timestamp +16 (3) Cleaning up request packet ID 58 with timestamp +16 (4) Cleaning up request packet ID 59 with timestamp +16 (5) Cleaning up request packet ID 60 with timestamp +16 (6) Cleaning up request packet ID 61 with timestamp +16 (7) Cleaning up request packet ID 62 with timestamp +16 (8) Cleaning up request packet ID 63 with timestamp +16 Ready to process requests

3 4

3.0.x Debian 10 "Buster" package
by Marek Des 23 Jul '19

23 Jul '19

Hello, any ETA on Buster package? Regards Marek

4 3

rlm_ldap: How to filter based on specific attributes?
by Mathieu Simon (Lists) 22 Jul '19

22 Jul '19

Hi I have an (OpenLDAP-based) directory that sets a specific attribute (univentionNetworkAccess) on either the user or the group based on which network Access is being granted. (1 means you are permitted, 0 or access of that attribtue indicates no access) I think this is where using access_attribute wouldn't work, as it is only defined in the users section but not groups - right? Additionnaly access should also only be granted if certain other Attributes have specific values (such as sambaAcctFlags, meaning if a user is locked or disabled). I'm looking into where this could be configured in the most meaningful way without adding to many chunks of custom logic to the default configuration... as in my experience staying close to the default config usually helps avoiding stupid errors... So far I've thought about mapping these attributes from LDAP to FR and then using unlang statements in post-auth for example to check for each condition. Q: How could I map attributes from LDAP groups to FreeRADIUS? (I've only ever done this with user attributes) (Somewhat similar as to what a guy asked in 2016: http://lists.freeradius.org/pipermail/freeradius-users/2016-August/084450.h…) If all attributes are mappable to FreeRADIUS using unlang, making conditions in the post-auth section would look possible ... right? Or would it be better to modify the LDAP "filter =" statemens of the ldap module in the user{ } and group{ } sections with the required attributes ? (likely ending up in somewhat clunky LDAP queries) Regards Mathieu

2 2

Linelog module
by mettichi 22 Jul '19

22 Jul '19

Hello,Please can any one tell me how to configure linelog module for accounting start stop interim update i would like to use it instead of detail module i have changed log format for accounting to be in one line instead of multiline and i would like to send accounting log to syslog serverI appreciate your helpThanksBassemEnvoyé depuis mon smartphone Samsung Galaxy.

4 5

Freeradius 3.0.17 seems to have deadlocked on me.
by Matthew Schumacher 21 Jul '19

21 Jul '19

List, Anyone see this before? My radius server is plugging away doing it's job, then suddenly I get this: Sun Jul 7 10:37:47 2019 : Error: Received conflicting packet from client 2.3.23.90 port 53874 - ID: 119 due to unfinished request. Giving up on old request. Sun Jul 7 10:37:50 2019 : Error: Received conflicting packet from client 2.3.23.90 port 53874 - ID: 119 due to unfinished request. Giving up on old request. Sun Jul 7 10:37:53 2019 : Error: Received conflicting packet from client 2.3.22.14 port 39039 - ID: 36 due to unfinished request. Giving up on old request. Sun Jul 7 10:37:56 2019 : Error: Received conflicting packet from client 2.3.22.14 port 39039 - ID: 36 due to unfinished request. Giving up on old request. Sun Jul 7 10:37:56 2019 : Error: Received conflicting packet from client 2.3.22.9 port 46417 - ID: 203 due to unfinished request. Giving up on old request. Sun Jul 7 10:37:57 2019 : Error: Received conflicting packet from client 2.3.23.75 port 57383 - ID: 228 due to unfinished request. Giving up on old request. Now, I know that's normally because my underlying stack isn't returning fast enough, but in this case I never again see a working radius request until a restart, and my secondary radius server which relies on the same stack works just fine. The primary continued for a few hours recording nothing but logs like above, until it hit the max queue then transitioned to: Sun Jul 7 12:52:26 2019 : Error: Something is blocking the server. There are 65536 packets in the queue, waiting to be processed. Ignoring the new request. Sun Jul 7 12:52:26 2019 : Error: (18606025) Ignoring duplicate packet from client 2.3.9.250 port 59296 - ID: 120 due to unfinished request in component <core> module <queue> Sun Jul 7 12:52:27 2019 : Error: Something is blocking the server. There are 65536 packets in the queue, waiting to be processed. Ignoring the new request. Sun Jul 7 12:52:28 2019 : Error: Something is blocking the server. There are 65536 packets in the queue, waiting to be processed. Ignoring the new request. Sun Jul 7 12:52:29 2019 : Error: Something is blocking the server. There are 65536 packets in the queue, waiting to be processed. Ignoring the new request. Sun Jul 7 12:52:30 2019 : Error: Something is blocking the server. There are 65536 packets in the queue, waiting to be processed. Ignoring the new request. Sun Jul 7 12:52:30 2019 : Error: (18606051) Ignoring duplicate packet from client 2.3.9.241 port 32851 - ID: 126 due to unfinished request in component <core> module <queue> Sun Jul 7 12:52:30 2019 : Error: (18606052) Ignoring duplicate packet from client 2.3.9.236 port 44942 - ID: 179 due to unfinished request in component <core> module <queue> Sun Jul 7 12:52:30 2019 : Error: (18606053) Ignoring duplicate packet from client 2.3.9.236 port 42423 - ID: 180 due to unfinished request in component <core> module <queue> Sun Jul 7 12:52:31 2019 : Error: Something is blocking the server. There are 65536 packets in the queue, waiting to be processed. Ignoring the new request. Sun Jul 7 12:52:32 2019 : Error: Something is blocking the server. There are 65536 packets in the queue, waiting to be processed. Ignoring the new request. Sun Jul 7 12:52:33 2019 : Error: Something is blocking the server. There are 65536 packets in the queue, waiting to be processed. Ignoring the new request. Sun Jul 7 12:52:34 2019 : Error: Something is blocking the server. There are 65536 packets in the queue, waiting to be processed. Ignoring the new request. Sun Jul 7 12:52:35 2019 : Error: Something is blocking the server. There are 65536 packets in the queue, waiting to be processed. Ignoring the new request. Sun Jul 7 12:52:36 2019 : Error: Something is blocking the server. There are 65536 packets in the queue, waiting to be processed. Ignoring the new request. Sun Jul 7 12:52:37 2019 : Error: Something is blocking the server. There are 65536 packets in the queue, waiting to be processed. Ignoring the new request. Then nothing but this until I had to kill -9 the process. The underlying stack is an ldap and sql lookup. Both of those systems are well indexed with care taken to make sure they return quickly. In fact, once I restarted the radiusd daemon, I was able to immediately authenticate very quickly: $ time radtest user password localhost:1645 1 naspassword Sent Access-Request Id 187 from 0.0.0.0:47859 to 127.0.0.1:1645 length 76 User-Name = "user" User-Password = "password" NAS-IP-Address = 192.168.103.7 NAS-Port = 1 Message-Authenticator = 0x00 Cleartext-Password = "password" Received Access-Accept Id 187 from 127.0.0.1:1645 to 127.0.0.1:47859 length 57 Service-Type = Framed-User Framed-Protocol = PPP Framed-MTU = 1492 real 0m0.035s user 0m0.017s sys 0m0.009s Seems that starting up radtest, making a connection, asking, authenticating, and closing out in 35ms is fast enough. I'm about to upgrade to 3.0.19, but generally don't like the guess and check method. Any reason to believe that this is a bug and if it's been fixed? schu

3 7

Re: Proxy issue - Failing proxied request for user error
by James Wood 21 Jul '19

21 Jul '19

Found it. I checked `cat /proc/net/udp` and could see some packets being dropped in the UDP buffer queue; and whilst monitoring the dropped packets we're seeing from the clients, the numbers were going up in line with this. So I increased the `net.core.rmem` and `net.core.wmem` values a little on the server via sysctl, to increase the default UDP buffer size which has stopped the timeouts from occurring. I guess out the box the server has am appropriate value for the UDP buffer queue but when using FreeRADIUS it fills it up if there's enough traffic (and its all UDP) and then the kernel starts dropping packets. Whist I appreciate it's not FreeRADIUS related, is there any advice around the best sysctl values to use for a large FreeRADIUS server? Has anyone come across this before? Thanks J

3 5

Subject: First time run failure - magic number mismatch
by Jiuyu Sun 19 Jul '19

19 Jul '19

Hi, I am trying to install Freeradius from source on a Linux machine. When I run radiusd -X, I got the following error: $ sudo radiusd -X radiusd: Application and libfreeradius-radius magic number (version) mismatch. application: 30020c library: 30020f Thank you!

2 3

redis_ippool_tool is not supporting password authentication
by Chinnapaiyan, Nagamani 19 Jul '19

19 Jul '19

Hi, I have a redis server on AWS with auth token enabled. I am trying to add some ip pools in the db via rlm_redis_ippool_tool command. However, this command does not work for this auth enabled redis db. $ cat redis_ippool redis { server = <server_ip> port = 6379 password = <pass> } $ /usr/local/bin/rlm_redis_ippool_tool -a 10.88.112.3-10.88.112.62 -f redis_ippool TESTPOOL Error : Need pool to operate on $ /usr/local/bin/rlm_redis_ippool_tool -a 10.88.112.3-10.88.112.62 -f redis_ippool <server_ip>:6379 TESTPOOL $ echo $? 1 $ redis-cli -c -h <server_ip> -p 6379 -a <pass> Warning: Using a password with '-a' or '-u' option on the command line interface may not be safe. localhost:6379> keys * (empty list or set) localhost:6379> exit Regards, Nagamani Chinnapaiyan

2 2

Please tell me about rewrite_called_station_id.
by Yuya Yanagi 19 Jul '19

19 Jul '19

Hi,All Please tell me about rewrite_called_station_id. The description of rewrite_called_station_id was written to the authorize section of sites-available / default and sites-available / inner-tunnel to obtain a Called-Station-SSID to control the approval process. However, although the default file side could obtain the value of Called-Station-SSID, the process of rewrite_called_station_id became FALSE in the internal tunnel file, and the value of Called-Station-SSID could not be obtained. Since I am using EAP-TTLS authentication, I want to set the inner tunnel to branch control, but I can not use it. If you have any advice, please let me know. y.y ------------Debug log--------- Fri Jul 19 15:52:16 2019 : Debug: (0) Using Post-Auth-Type Challenge Fri Jul 19 15:52:16 2019 : Debug: (0) # Executing group from file /etc/raddb/sites-enabled/default Fri Jul 19 15:52:16 2019 : Debug: (0) Challenge { ... } # empty sub-section is ignored Fri Jul 19 15:52:16 2019 : Debug: (0) session-state: Nothing to cache Fri Jul 19 15:52:16 2019 : Debug: (0) Sent Access-Challenge Id 68 from 133.15.18.14:1812 to 133.15.250.241:60211 length 0 Fri Jul 19 15:52:16 2019 : Debug: (0) EAP-Message = 0x010200061520 Fri Jul 19 15:52:16 2019 : Debug: (0) Message-Authenticator = 0x00000000000000000000000000000000 Fri Jul 19 15:52:16 2019 : Debug: (0) State = 0x68f31ff968f10ae77b5c26c718e1463c Fri Jul 19 15:52:16 2019 : Debug: (0) Finished request Fri Jul 19 15:52:16 2019 : Debug: Waking up in 4.9 seconds. Fri Jul 19 15:52:16 2019 : Debug: (1) Received Access-Request Id 70 from 133.15.250.241:60211 to 133.15.18.14:1812 length 279 Fri Jul 19 15:52:16 2019 : Debug: (1) User-Name = "anonymous" Fri Jul 19 15:52:16 2019 : Debug: (1) NAS-IP-Address = 10.254.0.241 Fri Jul 19 15:52:16 2019 : Debug: (1) NAS-Port = 12289 Fri Jul 19 15:52:16 2019 : Debug: (1) Called-Station-Id = "08-35-71-F2-CE-05:authtest" Fri Jul 19 15:52:16 2019 : Debug: (1) Calling-Station-Id = "50-3E-AA-6D-ED-7E" Fri Jul 19 15:52:16 2019 : Debug: (1) Framed-MTU = 1250 Fri Jul 19 15:52:16 2019 : Debug: (1) NAS-Port-Type = Wireless-802.11 Fri Jul 19 15:52:16 2019 : Debug: (1) Framed-Compression = None Fri Jul 19 15:52:16 2019 : Debug: (1) Connect-Info = "CONNECT 802.11g" Fri Jul 19 15:52:16 2019 : Debug: (1) Chargeable-User-Identity = 0x00 Fri Jul 19 15:52:16 2019 : Debug: (1) EAP-Message = 0x0202007115800000006716030100620100005e03015d31689fbadf8aadd98de6c61bd2a31c53b8b1185935160dd336d01fa44c5e86000018c014c0130035002fc00ac00900380032000a0013000500040100001d000a0006000400170018000b000201000023000000170000ff01000100 Fri Jul 19 15:52:16 2019 : Debug: (1) State = 0x68f31ff968f10ae77b5c26c718e1463c Fri Jul 19 15:52:16 2019 : Debug: (1) Message-Authenticator = 0x9047a006c6a06a8e05c854228e8a472e Fri Jul 19 15:52:16 2019 : Debug: (1) session-state: No cached attributes Fri Jul 19 15:52:16 2019 : Debug: (1) # Executing section authorize from file /etc/raddb/sites-enabled/default Fri Jul 19 15:52:16 2019 : Debug: (1) authorize { Fri Jul 19 15:52:16 2019 : Debug: (1) policy rewrite_called_station_id { Fri Jul 19 15:52:16 2019 : Debug: (1) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { Fri Jul 19 15:52:16 2019 : Debug: No matches Fri Jul 19 15:52:16 2019 : Debug: Adding 9 matches Fri Jul 19 15:52:16 2019 : Debug: (1) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) -> TRUE Fri Jul 19 15:52:16 2019 : Debug: (1) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { Fri Jul 19 15:52:16 2019 : Debug: (1) update request { Fri Jul 19 15:52:16 2019 : Debug: (1) 1/9 Found: 08 (3) Fri Jul 19 15:52:16 2019 : Debug: (1) 2/9 Found: 35 (3) Fri Jul 19 15:52:16 2019 : Debug: (1) 3/9 Found: 71 (3) Fri Jul 19 15:52:16 2019 : Debug: (1) 4/9 Found: F2 (3) Fri Jul 19 15:52:16 2019 : Debug: (1) 5/9 Found: CE (3) Fri Jul 19 15:52:16 2019 : Debug: (1) 6/9 Found: 05 (3) Fri Jul 19 15:52:16 2019 : Debug: (1) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} Fri Jul 19 15:52:16 2019 : Debug: (1) --> 08-35-71-F2-CE-05 Fri Jul 19 15:52:16 2019 : Debug: (1) &Called-Station-Id := 08-35-71-F2-CE-05 Fri Jul 19 15:52:16 2019 : Debug: (1) Overwriting value "08-35-71-F2-CE-05:authtest" with "08-35-71-F2-CE-05" Fri Jul 19 15:52:16 2019 : Debug: (1) } # update request = noop Fri Jul 19 15:52:16 2019 : Debug: (1) if ("%{8}") { Fri Jul 19 15:52:16 2019 : Debug: (1) EXPAND TMPL XLAT STRUCT Fri Jul 19 15:52:16 2019 : Debug: (1) 8/9 Found: authtest (9) Fri Jul 19 15:52:16 2019 : Debug: (1) EXPAND %{8} Fri Jul 19 15:52:16 2019 : Debug: (1) --> authtest Fri Jul 19 15:52:16 2019 : Debug: (1) if ("%{8}") -> TRUE Fri Jul 19 15:52:16 2019 : Debug: (1) if ("%{8}") { Fri Jul 19 15:52:16 2019 : Debug: (1) update request { Fri Jul 19 15:52:16 2019 : Debug: (1) 8/9 Found: authtest (9) Fri Jul 19 15:52:16 2019 : Debug: (1) EXPAND %{8} Fri Jul 19 15:52:16 2019 : Debug: (1) --> authtest Fri Jul 19 15:52:16 2019 : Debug: (1) &Called-Station-SSID := authtest Fri Jul 19 15:52:16 2019 : Debug: (1) } # update request = noop Fri Jul 19 15:52:16 2019 : Debug: (1) } # if ("%{8}") = noop Fri Jul 19 15:52:16 2019 : Debug: (1) modsingle[authorize]: calling updated (rlm_always) Fri Jul 19 15:52:16 2019 : Debug: (1) modsingle[authorize]: returned from updated (rlm_always) Fri Jul 19 15:52:16 2019 : Debug: (1) [updated] = updated Fri Jul 19 15:52:16 2019 : Debug: (1) } # if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) = updated Fri Jul 19 15:52:16 2019 : Debug: (1) ... skipping else: Preceding "if" was taken Fri Jul 19 15:52:16 2019 : Debug: (1) } # policy rewrite_called_station_id = updated ...... Fri Jul 19 15:52:16 2019 : Debug: (5) session-state: No State attribute Fri Jul 19 15:52:16 2019 : Debug: (5) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel Fri Jul 19 15:52:16 2019 : Debug: (5) authorize { Fri Jul 19 15:52:16 2019 : Debug: (5) policy rewrite_called_station_id { Fri Jul 19 15:52:16 2019 : Debug: (5) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { Fri Jul 19 15:52:16 2019 : Debug: (5) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) -> FALSE Fri Jul 19 15:52:16 2019 : Debug: (5) else { Fri Jul 19 15:52:16 2019 : Debug: (5) modsingle[authorize]: calling noop (rlm_always) Fri Jul 19 15:52:16 2019 : Debug: (5) modsingle[authorize]: returned from noop (rlm_always) Fri Jul 19 15:52:16 2019 : Debug: (5) [noop] = noop Fri Jul 19 15:52:16 2019 : Debug: (5) } # else = noop Fri Jul 19 15:52:16 2019 : Debug: (5) } # policy rewrite_called_station_id = noop Fri Jul 19 15:52:16 2019 : Debug: (5) modsingle[authorize]: calling mschap (rlm_mschap) Fri Jul 19 15:52:16 2019 : Debug: (5) modsingle[authorize]: returned from mschap (rlm_mschap) Fri Jul 19 15:52:16 2019 : Debug: (5) [mschap] = noop Fri Jul 19 15:52:16 2019 : Debug: (5) modsingle[authorize]: calling suffix (rlm_realm) Fri Jul 19 15:52:16 2019 : Debug: (5) suffix: Checking for suffix after "@" Fri Jul 19 15:52:16 2019 : Debug: (5) suffix: No '@' in User-Name = "rt015", looking up realm NULL Fri Jul 19 15:52:16 2019 : Debug: (5) suffix: Found realm "NULL" Fri Jul 19 15:52:16 2019 : Debug: (5) suffix: Adding Stripped-User-Name = "rt015" Fri Jul 19 15:52:16 2019 : Debug: (5) suffix: Adding Realm = "NULL" Fri Jul 19 15:52:16 2019 : Debug: (5) suffix: Authentication realm is LOCAL Fri Jul 19 15:52:16 2019 : Debug: (5) modsingle[authorize]: returned from suffix (rlm_realm) Fri Jul 19 15:52:16 2019 : Debug: (5) [suffix] = ok Fri Jul 19 15:52:16 2019 : Debug: (5) update control { Fri Jul 19 15:52:16 2019 : Debug: (5) &Proxy-To-Realm := LOCAL Fri Jul 19 15:52:16 2019 : Debug: (5) } # update control = noop Fri Jul 19 15:52:16 2019 : Debug: (5) modsingle[authorize]: calling eap (rlm_eap) Fri Jul 19 15:52:16 2019 : Debug: (5) eap: No EAP-Message, not doing EAP Fri Jul 19 15:52:16 2019 : Debug: (5) modsingle[authorize]: returned from eap (rlm_eap) Fri Jul 19 15:52:16 2019 : Debug: (5) [eap] = noop

2 1

FreeRadius replaces characters in '%{User-Password}' after upgrade 3.0.16->3.0.19
by belyj＠belyj.eu 18 Jul '19

18 Jul '19

Hello. After upgrade from 3.0.16 to 3.0.19 freeradius is replacing characters in mysql queries. (76475085) Tue Jul 16 16:16:06 2019: Debug: Received Access-Request Id 54 from length 126 (76475085) Tue Jul 16 16:16:06 2019: Debug: NAS-Identifier = "XXXX" (76475085) Tue Jul 16 16:16:06 2019: Debug: User-Password = "p6suf+FyNBebQgLMTdAXD4q0U/yZVIaxSN/w8LzVMlw=" query ... xxx.value = '%{User-Password}' AND ... (76475085) Tue Jul 16 16:16:06 2019: Debug: sql3: Executing select query: SELECT ... xxx.value = 'p6suf=2BFyNBebQgLMTdAXD4q0U/yZVIaxSN/w8LzVMlw=3D' AND ... \+ is replaced and =3D added at the end. `p6suf+FyNBebQgLMTdAXD4q0U/yZVIaxSN/w8LzVMlw=` `p6suf=2BFyNBebQgLMTdAXD4q0U/yZVIaxSN/w8LzVMlw=3D` radiusd: FreeRADIUS Version 3.0.19 (git #1156b5361), for host x86_64-pc-linux-gnu FreeRADIUS Version 3.0.19 On 3.0.16 same config, same query, password is not changed. Any help would be appreciated. Andrzej

5 9