- Freeradius-Users - lists.freeradius.org

Some guidance on integrating OTP authentication via SMS
by Santosh Kumar 17 Jan '25

17 Jan '25

Dear All, I need some guidance regarding OTP authentication via SMS. I have setup a TACACS+ Server in which I have installed freeradius for AAA authentication. Now I need to integrate OTP authentication via SMS to freeradius for allowing guest users to access WiFi. As I am unable to find the proper procedure document, any kind of guidance or help would be appreciated. Regards, Santosh

2 1

Cancellation of Previous Trouble Report
by 早川拓人 15 Jan '25

15 Jan '25

Hi I hope this message finds you well. I am writing to inform you that the issue reported in my previous email regarding the segmentation fault in FreeRADIUS v3.2.5 has already been resolved. Please disregard the trouble report sent earlier. Thank you for your understanding and support. Best regards, -----Original Message----- From: Freeradius-Users <freeradius-users-bounces+takuto.hayakawa=soliton.co.jp(a)lists.freeradius.org> On Behalf Of 早川拓人 Sent: Wednesday, January 15, 2025 2:56 PM To: freeradius-users(a)lists.freeradius.org Subject: Segmentation Fault Issue in FreeRADIUS v3.2.5 Hi! I hope this message finds you well. I am writing to report a critical issue we have encountered with FreeRADIUS v3.2.5. When the home server does not respond and a proxy request to the user fails, it results in a segmentation fault. To reproduce the issue, please add the following configuration: ========================================================================== radiusd.conf: client redundant-2 { ipaddr = "192.168.1.216" secret = "testing1234" } ========================================================================== sites-enabled/redundant-radrelay-2: home_server redundant-2-server { type = acct ipaddr = 192.168.1.216 port = 1813 secret = "testing5678" status_check = status-server response_window = 5 response_timeouts = 1 zombie_period = 20 } home_server_pool redundant-2-pool { home_server = redundant-2-server } realm redundant-2 { acct_pool = redundant-2-pool } server redundant-2-server { listen { type = detail filename = /var/data/redundant2/detail load_factor = 30 track = yes unlink_work_detail_keep_limit = 1000 } accounting { update control { Proxy-To-Realm := "redundant-2" } } } ========================================================================== mods-enabled/redundant: detail detail_redundant2 { filename = /var/data/redundant2/detail permissions = 0600 locking = yes detail_size_limit = 1048576 detail_keep_limit_for_size = 1010 } ========================================================================== When the RADIUS service is started and an Accounting Start packet is received, it results in a segmentation fault. It appears that the segmentation fault occurs due to a failure to access "request->packet->code" at the following commit: https://github.com/FreeRADIUS/freeradius-server/commit/67e58e67f7ba0efaa73c… Please find the debug log below for your reference: ========================================================================== freeradius thayakawa% sudo /usr/local/sbin/radiusd -X FreeRADIUS Version 3.2.5 Copyright (C) 1999-2023 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/local/share/freeradius/dictionary including dictionary file /usr/local/share/freeradius/dictionary.dhcp including dictionary file /usr/local/share/freeradius/dictionary.vqp including dictionary file /usr/local/etc/raddb/dictionary including configuration file /usr/local/etc/raddb/radiusd.conf including configuration file /usr/local/etc/raddb/proxy.conf including configuration file /usr/local/etc/raddb/clients.conf including files in directory /usr/local/etc/raddb/mods-enabled/ including configuration file /usr/local/etc/raddb/mods-enabled/expr including configuration file /usr/local/etc/raddb/mods-enabled/attr_filter including configuration file /usr/local/etc/raddb/mods-enabled/preprocess including configuration file /usr/local/etc/raddb/mods-enabled/linelog including configuration file /usr/local/etc/raddb/mods-enabled/redundant including configuration file /usr/local/etc/raddb/mods-enabled/sradutmp including configuration file /usr/local/etc/raddb/mods-enabled/replicate including configuration file /usr/local/etc/raddb/mods-enabled/passwd including configuration file /usr/local/etc/raddb/mods-enabled/detail.log including configuration file /usr/local/etc/raddb/mods-enabled/radutmp including configuration file /usr/local/etc/raddb/mods-enabled/unix including configuration file /usr/local/etc/raddb/mods-enabled/digest including configuration file /usr/local/etc/raddb/mods-enabled/always including configuration file /usr/local/etc/raddb/mods-enabled/ntlm_auth including configuration file /usr/local/etc/raddb/mods-enabled/realm including configuration file /usr/local/etc/raddb/mods-enabled/cache_eap including configuration file /usr/local/etc/raddb/mods-enabled/unpack including configuration file /usr/local/etc/raddb/mods-enabled/echo including configuration file /usr/local/etc/raddb/mods-enabled/detail including configuration file /usr/local/etc/raddb/mods-enabled/dynamic_clients including configuration file /usr/local/etc/raddb/mods-enabled/files including configuration file /usr/local/etc/raddb/mods-enabled/chap including configuration file /usr/local/etc/raddb/mods-enabled/logintime including configuration file /usr/local/etc/raddb/mods-enabled/pap including configuration file /usr/local/etc/raddb/mods-enabled/eap including configuration file /usr/local/etc/raddb/mods-enabled/mschap including configuration file /usr/local/etc/raddb/mods-enabled/expiration including configuration file /usr/local/etc/raddb/mods-enabled/soh including configuration file /usr/local/etc/raddb/mods-enabled/date including configuration file /usr/local/etc/raddb/mods-enabled/utf8 including configuration file /usr/local/etc/raddb/mods-enabled/exec including files in directory /usr/local/etc/raddb/policy.d/ including configuration file /usr/local/etc/raddb/policy.d/control including configuration file /usr/local/etc/raddb/policy.d/filter including configuration file /usr/local/etc/raddb/policy.d/canonicalization including configuration file /usr/local/etc/raddb/policy.d/moonshot-targeted-ids including configuration file /usr/local/etc/raddb/policy.d/operator-name including configuration file /usr/local/etc/raddb/policy.d/cui including configuration file /usr/local/etc/raddb/policy.d/dhcp including configuration file /usr/local/etc/raddb/policy.d/debug including configuration file /usr/local/etc/raddb/policy.d/abfab-tr including configuration file /usr/local/etc/raddb/policy.d/eap including configuration file /usr/local/etc/raddb/policy.d/rfc7542 including configuration file /usr/local/etc/raddb/policy.d/accounting including files in directory /usr/local/etc/raddb/sites-enabled/ including configuration file /usr/local/etc/raddb/sites-enabled/default including configuration file /usr/local/etc/raddb/sites-enabled/redundant-radrelay-2 including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel main { security { allow_core_dumps = no } name = "radiusd" prefix = "/usr/local" localstatedir = "/usr/local/var" logdir = "/usr/local/var/log/radius" run_dir = "/usr/local/var/run/radiusd" } main { name = "radiusd" prefix = "/usr/local" localstatedir = "/usr/local/var" sbindir = "/usr/local/sbin" logdir = "/usr/local/var/log/radius" run_dir = "/usr/local/var/run/radiusd" libdir = "/usr/local/lib" radacctdir = "/usr/local/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 proxy_dedup_window = 1 cleanup_delay = 5 max_requests = 16384 max_fds = 512 postauth_client_lost = no pidfile = "/usr/local/var/run/radiusd/radiusd.pid" checkrad = "/usr/local/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes require_message_authenticator = "auto" limit_proxy_state = "auto" allow_vulnerable_openssl = "no" } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { nonblock = no ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server redundant-2-server { nonblock = no ipaddr = 192.168.1.216 port = 1813 type = "acct" secret = <<< secret >>> response_window = 5.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 20 status_check = "status-server" ping_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 300 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } home_server_pool redundant-2-pool { home_server = redundant-2-server } realm redundant-2 { acct_pool = redundant-2-pool } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = "no" secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client private-network { ipaddr = 0.0.0.0/0 secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client redundant-2 { ipaddr = 192.168.1.216 secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_expr # Loading module "expr" from file /usr/local/etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /aeouaaaceeeeiio?uuuayAEOUsAAACEEEEIIO?UUU?" } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/usr/local/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/usr/local/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/usr/local/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/usr/local/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/usr/local/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_preprocess # Loading module "preprocess" from file /usr/local/etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/usr/local/etc/raddb/mods-config/preprocess/huntgroups" hints = "/usr/local/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_linelog # Loading module "linelog" from file /usr/local/etc/raddb/mods-enabled/linelog linelog { filename = "/usr/local/var/log/radius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /usr/local/etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/usr/local/var/log/radius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_detail # Loading module "detail_redundant2" from file /usr/local/etc/raddb/mods-enabled/redundant detail detail_redundant2 { filename = "/var/data/redundant2/detail" header = "%t" permissions = 384 locking = yes dates_as_integer = no escape_filenames = no log_packet_header = no } # Loaded module rlm_radutmp # Loading module "sradutmp" from file /usr/local/etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/usr/local/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_replicate # Loading module "replicate" from file /usr/local/etc/raddb/mods-enabled/replicate # Loaded module rlm_passwd # Loading module "etc_passwd" from file /usr/local/etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loading module "auth_log" from file /usr/local/etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no dates_as_integer = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /usr/local/etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no dates_as_integer = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no dates_as_integer = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no dates_as_integer = no escape_filenames = no log_packet_header = no } # Loading module "radutmp" from file /usr/local/etc/raddb/mods-enabled/radutmp radutmp { filename = "/usr/local/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_unix # Loading module "unix" from file /usr/local/etc/raddb/mods-enabled/unix unix { radwtmp = "/usr/local/var/log/radius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_digest # Loading module "digest" from file /usr/local/etc/raddb/mods-enabled/digest # Loaded module rlm_always # Loading module "reject" from file /usr/local/etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /usr/local/etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /usr/local/etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /usr/local/etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /usr/local/etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /usr/local/etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /usr/local/etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /usr/local/etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /usr/local/etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_exec # Loading module "ntlm_auth" from file /usr/local/etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_realm # Loading module "IPASS" from file /usr/local/etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /usr/local/etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "bangpath" from file /usr/local/etc/raddb/mods-enabled/realm realm bangpath { format = "prefix" delimiter = "!" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /usr/local/etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /usr/local/etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\" ignore_default = no ignore_null = no } # Loaded module rlm_cache # Loading module "cache_eap" from file /usr/local/etc/raddb/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_unpack # Loading module "unpack" from file /usr/local/etc/raddb/mods-enabled/unpack # Loading module "echo" from file /usr/local/etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loading module "detail" from file /usr/local/etc/raddb/mods-enabled/detail detail { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no dates_as_integer = no escape_filenames = no log_packet_header = no } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /usr/local/etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_files # Loading module "files" from file /usr/local/etc/raddb/mods-enabled/files files { filename = "/usr/local/etc/raddb/mods-config/files/authorize" acctusersfile = "/usr/local/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/usr/local/etc/raddb/mods-config/files/pre-proxy" } # Loaded module rlm_chap # Loading module "chap" from file /usr/local/etc/raddb/mods-enabled/chap # Loaded module rlm_logintime # Loading module "logintime" from file /usr/local/etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_pap # Loading module "pap" from file /usr/local/etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_eap # Loading module "eap" from file /usr/local/etc/raddb/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 max_eap_type = 52 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 dedup_key = "" } # Loaded module rlm_mschap # Loading module "mschap" from file /usr/local/etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_expiration # Loading module "expiration" from file /usr/local/etc/raddb/mods-enabled/expiration # Loaded module rlm_soh # Loading module "soh" from file /usr/local/etc/raddb/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_date # Loading module "date" from file /usr/local/etc/raddb/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" utc = no } # Loading module "wispr2date" from file /usr/local/etc/raddb/mods-enabled/date date wispr2date { format = "%Y-%m-%dT%H:%M:%S" utc = no } # Loaded module rlm_utf8 # Loading module "utf8" from file /usr/local/etc/raddb/mods-enabled/utf8 # Loading module "exec" from file /usr/local/etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } instantiate { } # Instantiating module "attr_filter.post-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /usr/local/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /usr/local/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /usr/local/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/accounting_response # Instantiating module "preprocess" from file /usr/local/etc/raddb/mods-enabled/preprocess reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/hints # Instantiating module "linelog" from file /usr/local/etc/raddb/mods-enabled/linelog # Instantiating module "log_accounting" from file /usr/local/etc/raddb/mods-enabled/linelog # Instantiating module "detail_redundant2" from file /usr/local/etc/raddb/mods-enabled/redundant # Instantiating module "etc_passwd" from file /usr/local/etc/raddb/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "auth_log" from file /usr/local/etc/raddb/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /usr/local/etc/raddb/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log # Instantiating module "reject" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "fail" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "ok" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "handled" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "invalid" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "userlock" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "notfound" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "noop" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "updated" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "IPASS" from file /usr/local/etc/raddb/mods-enabled/realm # Instantiating module "suffix" from file /usr/local/etc/raddb/mods-enabled/realm # Instantiating module "bangpath" from file /usr/local/etc/raddb/mods-enabled/realm # Instantiating module "realmpercent" from file /usr/local/etc/raddb/mods-enabled/realm # Instantiating module "ntdomain" from file /usr/local/etc/raddb/mods-enabled/realm # Instantiating module "cache_eap" from file /usr/local/etc/raddb/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "detail" from file /usr/local/etc/raddb/mods-enabled/detail # Instantiating module "files" from file /usr/local/etc/raddb/mods-enabled/files reading pairlist file /usr/local/etc/raddb/mods-config/files/authorize reading pairlist file /usr/local/etc/raddb/mods-config/files/accounting reading pairlist file /usr/local/etc/raddb/mods-config/files/pre-proxy # Instantiating module "logintime" from file /usr/local/etc/raddb/mods-enabled/logintime # Instantiating module "pap" from file /usr/local/etc/raddb/mods-enabled/pap # Instantiating module "eap" from file /usr/local/etc/raddb/mods-enabled/eap # Linked to sub-module rlm_eap_md5 rlm_eap (EAP): Ignoring EAP method 'leap', because it is no longer supported # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/usr/local/etc/raddb/certs" pem_file_type = yes private_key_file = "/usr/local/etc/raddb/certs/server.pem" certificate_file = "/usr/local/etc/raddb/certs/server.pem" ca_file = "/usr/local/etc/raddb/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/usr/local/etc/raddb/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no ca_path_reload_interval = 0 cipher_list = "DEFAULT" cipher_server_preference = no reject_unknown_intermediate_ca = no ecdh_curve = "prime256v1" disable_tlsv1 = yes disable_tlsv1_1 = yes tls_max_version = "1.2" tls_min_version = "1.2" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = http://127.0.0.1/ocsp/ use_nonce = yes timeout = 0 softfail = no } } tls: Please use 'tls_min_version' and 'tls_max_version' instead of 'disable_tlsv1' tls: Please use 'tls_min_version' and 'tls_max_version' instead of 'disable_tlsv1_1' tls: Setting DH parameters from /usr/local/etc/raddb/certs/dh - this is no longer necessary. tls: You should comment out the 'dh_file' configuration item. # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "mschap" from file /usr/local/etc/raddb/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "expiration" from file /usr/local/etc/raddb/mods-enabled/expiration } # modules radiusd: #### Loading Virtual Servers #### server { # from file /usr/local/etc/raddb/radiusd.conf } # server server default { # from file /usr/local/etc/raddb/sites-enabled/default # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type CHAP for attr Auth-Type Compiling Auth-Type MS-CHAP for attr Auth-Type # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} Compiling Post-Auth-Type REJECT for attr Post-Auth-Type Compiling Post-Auth-Type Challenge for attr Post-Auth-Type } # server default server redundant-2-server { # from file /usr/local/etc/raddb/sites-enabled/redundant-radrelay-2 # Loading accounting {...} } # server redundant-2-server server inner-tunnel { # from file /usr/local/etc/raddb/sites-enabled/inner-tunnel # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type CHAP for attr Auth-Type Compiling Auth-Type MS-CHAP for attr Auth-Type # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /usr/local/etc/raddb/sites-enabled/inner-tunnel:336 Compiling Post-Auth-Type REJECT for attr Post-Auth-Type } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 1812 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 1813 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "detail" listen { filename = "/var/data/redundant2/detail" load_factor = 30 poll_interval = 1 retry_interval = 30 one_shot = no track = yes } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on detail file /var/data/redundant2/detail as server redundant-2-server Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on proxy address * port 44103 Listening on proxy address :: port 55513 Ready to process requests detail (/var/data/redundant2/detail): Polling for detail file detail (/var/data/redundant2/detail): Detail listener state unopened waiting 0.943258 sec detail (/var/data/redundant2/detail): Polling for detail file detail (/var/data/redundant2/detail): Detail listener state unopened waiting 1.104944 sec detail (/var/data/redundant2/detail): Polling for detail file detail (/var/data/redundant2/detail): Detail listener state unopened waiting 0.828299 sec detail (/var/data/redundant2/detail): Polling for detail file detail (/var/data/redundant2/detail): Detail listener state unopened waiting 0.909490 sec detail (/var/data/redundant2/detail): Polling for detail file detail (/var/data/redundant2/detail): Detail listener state unopened waiting 0.912661 sec detail (/var/data/redundant2/detail): Polling for detail file detail (/var/data/redundant2/detail): Detail listener state unopened waiting 1.220833 sec detail (/var/data/redundant2/detail): Polling for detail file detail (/var/data/redundant2/detail): Detail listener state unopened waiting 1.118784 sec (0) Received Accounting-Request Id 1 from 192.168.1.200:61807 to 192.168.1.204:1813 length 42 (0) User-Name = "testuser" (0) Acct-Status-Type = Start (0) Acct-Session-Id = "8592" (0) # Executing section preacct from file /usr/local/etc/raddb/sites-enabled/default (0) preacct { (0) [preprocess] = ok (0) policy acct_unique { (0) update request { (0) &Tmp-String-9 := "ai:" (0) } # update request = noop (0) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) && ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) { (0) EXPAND %{hex:&Class} (0) --> (0) EXPAND ^%{hex:&Tmp-String-9} (0) --> ^61693a (0) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) && ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) -> FALSE (0) else { (0) update request { (0) EXPAND %{md5:%{User-Name},%{Acct-Session-ID},%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}},%{NAS-Identifier},%{NAS-Port-ID},%{NAS-Port}} (0) --> 2ce36d08ca5e9d33e496de3dacaa4328 (0) &Acct-Unique-Session-Id := 2ce36d08ca5e9d33e496de3dacaa4328 (0) } # update request = noop (0) } # else = noop (0) } # policy acct_unique = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "testuser", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) [files] = noop (0) } # preacct = ok (0) # Executing section accounting from file /usr/local/etc/raddb/sites-enabled/default (0) accounting { (0) detail: EXPAND /usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d (0) detail: --> /usr/local/var/log/radius/radacct/192.168.1.200/detail-20250115 (0) detail: /usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d expands to /usr/local/var/log/radius/radacct/192.168.1.200/detail-20250115 (0) detail: EXPAND %t (0) detail: --> Wed Jan 15 13:54:49 2025 (0) [detail] = ok (0) [unix] = ok (0) [exec] = noop (0) attr_filter.accounting_response: EXPAND %{User-Name} (0) attr_filter.accounting_response: --> testuser (0) attr_filter.accounting_response: Matched entry DEFAULT at line 12 (0) [attr_filter.accounting_response] = updated (0) policy is_redundant_partner { (0) if ( "%{Packet-src-IP-Address}" == "192.168.1.216" ) { (0) EXPAND %{Packet-src-IP-Address} (0) --> 192.168.1.200 (0) if ( "%{Packet-src-IP-Address}" == "192.168.1.216" ) -> FALSE (0) [noop] = noop (0) } # policy is_redundant_partner = noop (0) if (noop) { (0) if (noop) -> TRUE (0) if (noop) { (0) detail_redundant2: EXPAND /var/data/redundant2/detail (0) detail_redundant2: --> /var/data/redundant2/detail (0) detail_redundant2: /var/data/redundant2/detail expands to /var/data/redundant2/detail (0) detail_redundant2: EXPAND %t (0) detail_redundant2: --> Wed Jan 15 13:54:49 2025 (0) [detail_redundant2] = ok (0) } # if (noop) = ok (0) } # accounting = updated (0) Sent Accounting-Response Id 1 from 192.168.1.204:1813 to 192.168.1.200:61807 length 20 (0) Finished request (0) Cleaning up request packet ID 1 with timestamp +6 due to done Ready to process requests detail (/var/data/redundant2/detail): Polling for detail file detail (/var/data/redundant2/detail): Renaming /var/data/redundant2/detail -> /var/data/redundant2/detail.work detail (/var/data/redundant2/detail): Read packet from /var/data/redundant2/detail.work User-Name = "testuser" Acct-Status-Type = Start Acct-Session-Id = "8592" NAS-IP-Address = 192.168.1.200 Event-Timestamp = "Jan 15 2025 13:54:49 JST" Tmp-String-9 = "ai:" Acct-Unique-Session-Id = "2ce36d08ca5e9d33e496de3dacaa4328" Packet-Original-Timestamp = "Jan 15 2025 13:54:48 JST" Acct-Delay-Time = 0 Packet-Transmit-Counter = 1 (1) # Executing section accounting from file /usr/local/etc/raddb/sites-enabled/redundant-radrelay-2 (1) accounting { (1) update control { (1) Proxy-To-Realm := "redundant-2" (1) } # update control = noop (1) } # accounting = noop (1) Starting proxy to home server 192.168.1.216 port 1813 (1) server redundant-2-server { (1) } (1) Proxying request to home server 192.168.1.216 port 1813 timeout 5.000000 Waking up in 0.3 seconds. (1) Expecting proxy response no later than 4.666454 seconds from now Waking up in 4.6 seconds. (1) No proxy response, giving up on request and marking it done Marking home server 192.168.1.216 port 1813 as zombie (it has not responded in 5.000000 seconds). PING: Waiting 4 seconds for response to ping (2) Sent Status-Server Id 74 from 0.0.0.0:44103 to 192.168.1.216:1813 length 70 (2) Message-Authenticator := 0x00 (2) NAS-Identifier := "Status Check 0. Are you alive?" PING: Next status packet in 30 seconds (1) ERROR: Failing proxied request for user "testuser", due to lack of any response from home server 192.168.1.216 port 1813 (1) Clearing existing &reply: attributes (1) Found Post-Proxy-Type Fail-Accounting (1) server redundant-2-server { (1) Post-Proxy-Type sub-section not found. Ignoring. (1) } (1) detail (/var/data/redundant2/detail): No response to request. Will retry in 30 seconds (1) Finished request (1) Cleaning up request packet ID 0 with timestamp +7 due to done Waking up in 3.9 seconds. No response to status check 2 ID 74 for home server 192.168.1.216 port 1813 zsh: segmentation fault sudo /usr/local/sbin/radiusd -X ========================================================================== This issue has been reported previously: https://github.com/FreeRADIUS/freeradius-server/issues/5485 We would appreciate your prompt assistance in resolving this issue. Thank you for your attention to this matter. Best regards, - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

1 0

Segmentation Fault Issue in FreeRADIUS v3.2.5
by 早川拓人 15 Jan '25

15 Jan '25

Hi! I hope this message finds you well. I am writing to report a critical issue we have encountered with FreeRADIUS v3.2.5. When the home server does not respond and a proxy request to the user fails, it results in a segmentation fault. To reproduce the issue, please add the following configuration: ========================================================================== radiusd.conf: client redundant-2 { ipaddr = "192.168.1.216" secret = "testing1234" } ========================================================================== sites-enabled/redundant-radrelay-2: home_server redundant-2-server { type = acct ipaddr = 192.168.1.216 port = 1813 secret = "testing5678" status_check = status-server response_window = 5 response_timeouts = 1 zombie_period = 20 } home_server_pool redundant-2-pool { home_server = redundant-2-server } realm redundant-2 { acct_pool = redundant-2-pool } server redundant-2-server { listen { type = detail filename = /var/data/redundant2/detail load_factor = 30 track = yes unlink_work_detail_keep_limit = 1000 } accounting { update control { Proxy-To-Realm := "redundant-2" } } } ========================================================================== mods-enabled/redundant: detail detail_redundant2 { filename = /var/data/redundant2/detail permissions = 0600 locking = yes detail_size_limit = 1048576 detail_keep_limit_for_size = 1010 } ========================================================================== When the RADIUS service is started and an Accounting Start packet is received, it results in a segmentation fault. It appears that the segmentation fault occurs due to a failure to access "request->packet->code" at the following commit: https://github.com/FreeRADIUS/freeradius-server/commit/67e58e67f7ba0efaa73c… Please find the debug log below for your reference: ========================================================================== freeradius thayakawa% sudo /usr/local/sbin/radiusd -X FreeRADIUS Version 3.2.5 Copyright (C) 1999-2023 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/local/share/freeradius/dictionary including dictionary file /usr/local/share/freeradius/dictionary.dhcp including dictionary file /usr/local/share/freeradius/dictionary.vqp including dictionary file /usr/local/etc/raddb/dictionary including configuration file /usr/local/etc/raddb/radiusd.conf including configuration file /usr/local/etc/raddb/proxy.conf including configuration file /usr/local/etc/raddb/clients.conf including files in directory /usr/local/etc/raddb/mods-enabled/ including configuration file /usr/local/etc/raddb/mods-enabled/expr including configuration file /usr/local/etc/raddb/mods-enabled/attr_filter including configuration file /usr/local/etc/raddb/mods-enabled/preprocess including configuration file /usr/local/etc/raddb/mods-enabled/linelog including configuration file /usr/local/etc/raddb/mods-enabled/redundant including configuration file /usr/local/etc/raddb/mods-enabled/sradutmp including configuration file /usr/local/etc/raddb/mods-enabled/replicate including configuration file /usr/local/etc/raddb/mods-enabled/passwd including configuration file /usr/local/etc/raddb/mods-enabled/detail.log including configuration file /usr/local/etc/raddb/mods-enabled/radutmp including configuration file /usr/local/etc/raddb/mods-enabled/unix including configuration file /usr/local/etc/raddb/mods-enabled/digest including configuration file /usr/local/etc/raddb/mods-enabled/always including configuration file /usr/local/etc/raddb/mods-enabled/ntlm_auth including configuration file /usr/local/etc/raddb/mods-enabled/realm including configuration file /usr/local/etc/raddb/mods-enabled/cache_eap including configuration file /usr/local/etc/raddb/mods-enabled/unpack including configuration file /usr/local/etc/raddb/mods-enabled/echo including configuration file /usr/local/etc/raddb/mods-enabled/detail including configuration file /usr/local/etc/raddb/mods-enabled/dynamic_clients including configuration file /usr/local/etc/raddb/mods-enabled/files including configuration file /usr/local/etc/raddb/mods-enabled/chap including configuration file /usr/local/etc/raddb/mods-enabled/logintime including configuration file /usr/local/etc/raddb/mods-enabled/pap including configuration file /usr/local/etc/raddb/mods-enabled/eap including configuration file /usr/local/etc/raddb/mods-enabled/mschap including configuration file /usr/local/etc/raddb/mods-enabled/expiration including configuration file /usr/local/etc/raddb/mods-enabled/soh including configuration file /usr/local/etc/raddb/mods-enabled/date including configuration file /usr/local/etc/raddb/mods-enabled/utf8 including configuration file /usr/local/etc/raddb/mods-enabled/exec including files in directory /usr/local/etc/raddb/policy.d/ including configuration file /usr/local/etc/raddb/policy.d/control including configuration file /usr/local/etc/raddb/policy.d/filter including configuration file /usr/local/etc/raddb/policy.d/canonicalization including configuration file /usr/local/etc/raddb/policy.d/moonshot-targeted-ids including configuration file /usr/local/etc/raddb/policy.d/operator-name including configuration file /usr/local/etc/raddb/policy.d/cui including configuration file /usr/local/etc/raddb/policy.d/dhcp including configuration file /usr/local/etc/raddb/policy.d/debug including configuration file /usr/local/etc/raddb/policy.d/abfab-tr including configuration file /usr/local/etc/raddb/policy.d/eap including configuration file /usr/local/etc/raddb/policy.d/rfc7542 including configuration file /usr/local/etc/raddb/policy.d/accounting including files in directory /usr/local/etc/raddb/sites-enabled/ including configuration file /usr/local/etc/raddb/sites-enabled/default including configuration file /usr/local/etc/raddb/sites-enabled/redundant-radrelay-2 including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel main { security { allow_core_dumps = no } name = "radiusd" prefix = "/usr/local" localstatedir = "/usr/local/var" logdir = "/usr/local/var/log/radius" run_dir = "/usr/local/var/run/radiusd" } main { name = "radiusd" prefix = "/usr/local" localstatedir = "/usr/local/var" sbindir = "/usr/local/sbin" logdir = "/usr/local/var/log/radius" run_dir = "/usr/local/var/run/radiusd" libdir = "/usr/local/lib" radacctdir = "/usr/local/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 proxy_dedup_window = 1 cleanup_delay = 5 max_requests = 16384 max_fds = 512 postauth_client_lost = no pidfile = "/usr/local/var/run/radiusd/radiusd.pid" checkrad = "/usr/local/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes require_message_authenticator = "auto" limit_proxy_state = "auto" allow_vulnerable_openssl = "no" } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { nonblock = no ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server redundant-2-server { nonblock = no ipaddr = 192.168.1.216 port = 1813 type = "acct" secret = <<< secret >>> response_window = 5.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 20 status_check = "status-server" ping_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 300 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } home_server_pool redundant-2-pool { home_server = redundant-2-server } realm redundant-2 { acct_pool = redundant-2-pool } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = "no" secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client private-network { ipaddr = 0.0.0.0/0 secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client redundant-2 { ipaddr = 192.168.1.216 secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_expr # Loading module "expr" from file /usr/local/etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /aeouaaaceeeeiio?uuuayAEOUsAAACEEEEIIO?UUU?" } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/usr/local/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/usr/local/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/usr/local/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/usr/local/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/usr/local/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_preprocess # Loading module "preprocess" from file /usr/local/etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/usr/local/etc/raddb/mods-config/preprocess/huntgroups" hints = "/usr/local/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_linelog # Loading module "linelog" from file /usr/local/etc/raddb/mods-enabled/linelog linelog { filename = "/usr/local/var/log/radius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /usr/local/etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/usr/local/var/log/radius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_detail # Loading module "detail_redundant2" from file /usr/local/etc/raddb/mods-enabled/redundant detail detail_redundant2 { filename = "/var/data/redundant2/detail" header = "%t" permissions = 384 locking = yes dates_as_integer = no escape_filenames = no log_packet_header = no } # Loaded module rlm_radutmp # Loading module "sradutmp" from file /usr/local/etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/usr/local/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_replicate # Loading module "replicate" from file /usr/local/etc/raddb/mods-enabled/replicate # Loaded module rlm_passwd # Loading module "etc_passwd" from file /usr/local/etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loading module "auth_log" from file /usr/local/etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no dates_as_integer = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /usr/local/etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no dates_as_integer = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no dates_as_integer = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no dates_as_integer = no escape_filenames = no log_packet_header = no } # Loading module "radutmp" from file /usr/local/etc/raddb/mods-enabled/radutmp radutmp { filename = "/usr/local/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_unix # Loading module "unix" from file /usr/local/etc/raddb/mods-enabled/unix unix { radwtmp = "/usr/local/var/log/radius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_digest # Loading module "digest" from file /usr/local/etc/raddb/mods-enabled/digest # Loaded module rlm_always # Loading module "reject" from file /usr/local/etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /usr/local/etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /usr/local/etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /usr/local/etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /usr/local/etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /usr/local/etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /usr/local/etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /usr/local/etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /usr/local/etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_exec # Loading module "ntlm_auth" from file /usr/local/etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_realm # Loading module "IPASS" from file /usr/local/etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /usr/local/etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "bangpath" from file /usr/local/etc/raddb/mods-enabled/realm realm bangpath { format = "prefix" delimiter = "!" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /usr/local/etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /usr/local/etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\" ignore_default = no ignore_null = no } # Loaded module rlm_cache # Loading module "cache_eap" from file /usr/local/etc/raddb/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_unpack # Loading module "unpack" from file /usr/local/etc/raddb/mods-enabled/unpack # Loading module "echo" from file /usr/local/etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loading module "detail" from file /usr/local/etc/raddb/mods-enabled/detail detail { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no dates_as_integer = no escape_filenames = no log_packet_header = no } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /usr/local/etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_files # Loading module "files" from file /usr/local/etc/raddb/mods-enabled/files files { filename = "/usr/local/etc/raddb/mods-config/files/authorize" acctusersfile = "/usr/local/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/usr/local/etc/raddb/mods-config/files/pre-proxy" } # Loaded module rlm_chap # Loading module "chap" from file /usr/local/etc/raddb/mods-enabled/chap # Loaded module rlm_logintime # Loading module "logintime" from file /usr/local/etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_pap # Loading module "pap" from file /usr/local/etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_eap # Loading module "eap" from file /usr/local/etc/raddb/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 max_eap_type = 52 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 dedup_key = "" } # Loaded module rlm_mschap # Loading module "mschap" from file /usr/local/etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_expiration # Loading module "expiration" from file /usr/local/etc/raddb/mods-enabled/expiration # Loaded module rlm_soh # Loading module "soh" from file /usr/local/etc/raddb/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_date # Loading module "date" from file /usr/local/etc/raddb/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" utc = no } # Loading module "wispr2date" from file /usr/local/etc/raddb/mods-enabled/date date wispr2date { format = "%Y-%m-%dT%H:%M:%S" utc = no } # Loaded module rlm_utf8 # Loading module "utf8" from file /usr/local/etc/raddb/mods-enabled/utf8 # Loading module "exec" from file /usr/local/etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } instantiate { } # Instantiating module "attr_filter.post-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /usr/local/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /usr/local/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /usr/local/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/accounting_response # Instantiating module "preprocess" from file /usr/local/etc/raddb/mods-enabled/preprocess reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/hints # Instantiating module "linelog" from file /usr/local/etc/raddb/mods-enabled/linelog # Instantiating module "log_accounting" from file /usr/local/etc/raddb/mods-enabled/linelog # Instantiating module "detail_redundant2" from file /usr/local/etc/raddb/mods-enabled/redundant # Instantiating module "etc_passwd" from file /usr/local/etc/raddb/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "auth_log" from file /usr/local/etc/raddb/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /usr/local/etc/raddb/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log # Instantiating module "reject" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "fail" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "ok" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "handled" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "invalid" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "userlock" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "notfound" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "noop" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "updated" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "IPASS" from file /usr/local/etc/raddb/mods-enabled/realm # Instantiating module "suffix" from file /usr/local/etc/raddb/mods-enabled/realm # Instantiating module "bangpath" from file /usr/local/etc/raddb/mods-enabled/realm # Instantiating module "realmpercent" from file /usr/local/etc/raddb/mods-enabled/realm # Instantiating module "ntdomain" from file /usr/local/etc/raddb/mods-enabled/realm # Instantiating module "cache_eap" from file /usr/local/etc/raddb/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "detail" from file /usr/local/etc/raddb/mods-enabled/detail # Instantiating module "files" from file /usr/local/etc/raddb/mods-enabled/files reading pairlist file /usr/local/etc/raddb/mods-config/files/authorize reading pairlist file /usr/local/etc/raddb/mods-config/files/accounting reading pairlist file /usr/local/etc/raddb/mods-config/files/pre-proxy # Instantiating module "logintime" from file /usr/local/etc/raddb/mods-enabled/logintime # Instantiating module "pap" from file /usr/local/etc/raddb/mods-enabled/pap # Instantiating module "eap" from file /usr/local/etc/raddb/mods-enabled/eap # Linked to sub-module rlm_eap_md5 rlm_eap (EAP): Ignoring EAP method 'leap', because it is no longer supported # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/usr/local/etc/raddb/certs" pem_file_type = yes private_key_file = "/usr/local/etc/raddb/certs/server.pem" certificate_file = "/usr/local/etc/raddb/certs/server.pem" ca_file = "/usr/local/etc/raddb/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/usr/local/etc/raddb/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no ca_path_reload_interval = 0 cipher_list = "DEFAULT" cipher_server_preference = no reject_unknown_intermediate_ca = no ecdh_curve = "prime256v1" disable_tlsv1 = yes disable_tlsv1_1 = yes tls_max_version = "1.2" tls_min_version = "1.2" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = http://127.0.0.1/ocsp/ use_nonce = yes timeout = 0 softfail = no } } tls: Please use 'tls_min_version' and 'tls_max_version' instead of 'disable_tlsv1' tls: Please use 'tls_min_version' and 'tls_max_version' instead of 'disable_tlsv1_1' tls: Setting DH parameters from /usr/local/etc/raddb/certs/dh - this is no longer necessary. tls: You should comment out the 'dh_file' configuration item. # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "mschap" from file /usr/local/etc/raddb/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "expiration" from file /usr/local/etc/raddb/mods-enabled/expiration } # modules radiusd: #### Loading Virtual Servers #### server { # from file /usr/local/etc/raddb/radiusd.conf } # server server default { # from file /usr/local/etc/raddb/sites-enabled/default # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type CHAP for attr Auth-Type Compiling Auth-Type MS-CHAP for attr Auth-Type # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} Compiling Post-Auth-Type REJECT for attr Post-Auth-Type Compiling Post-Auth-Type Challenge for attr Post-Auth-Type } # server default server redundant-2-server { # from file /usr/local/etc/raddb/sites-enabled/redundant-radrelay-2 # Loading accounting {...} } # server redundant-2-server server inner-tunnel { # from file /usr/local/etc/raddb/sites-enabled/inner-tunnel # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type CHAP for attr Auth-Type Compiling Auth-Type MS-CHAP for attr Auth-Type # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /usr/local/etc/raddb/sites-enabled/inner-tunnel:336 Compiling Post-Auth-Type REJECT for attr Post-Auth-Type } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 1812 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 1813 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "detail" listen { filename = "/var/data/redundant2/detail" load_factor = 30 poll_interval = 1 retry_interval = 30 one_shot = no track = yes } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on detail file /var/data/redundant2/detail as server redundant-2-server Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on proxy address * port 44103 Listening on proxy address :: port 55513 Ready to process requests detail (/var/data/redundant2/detail): Polling for detail file detail (/var/data/redundant2/detail): Detail listener state unopened waiting 0.943258 sec detail (/var/data/redundant2/detail): Polling for detail file detail (/var/data/redundant2/detail): Detail listener state unopened waiting 1.104944 sec detail (/var/data/redundant2/detail): Polling for detail file detail (/var/data/redundant2/detail): Detail listener state unopened waiting 0.828299 sec detail (/var/data/redundant2/detail): Polling for detail file detail (/var/data/redundant2/detail): Detail listener state unopened waiting 0.909490 sec detail (/var/data/redundant2/detail): Polling for detail file detail (/var/data/redundant2/detail): Detail listener state unopened waiting 0.912661 sec detail (/var/data/redundant2/detail): Polling for detail file detail (/var/data/redundant2/detail): Detail listener state unopened waiting 1.220833 sec detail (/var/data/redundant2/detail): Polling for detail file detail (/var/data/redundant2/detail): Detail listener state unopened waiting 1.118784 sec (0) Received Accounting-Request Id 1 from 192.168.1.200:61807 to 192.168.1.204:1813 length 42 (0) User-Name = "testuser" (0) Acct-Status-Type = Start (0) Acct-Session-Id = "8592" (0) # Executing section preacct from file /usr/local/etc/raddb/sites-enabled/default (0) preacct { (0) [preprocess] = ok (0) policy acct_unique { (0) update request { (0) &Tmp-String-9 := "ai:" (0) } # update request = noop (0) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) && ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) { (0) EXPAND %{hex:&Class} (0) --> (0) EXPAND ^%{hex:&Tmp-String-9} (0) --> ^61693a (0) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) && ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) -> FALSE (0) else { (0) update request { (0) EXPAND %{md5:%{User-Name},%{Acct-Session-ID},%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}},%{NAS-Identifier},%{NAS-Port-ID},%{NAS-Port}} (0) --> 2ce36d08ca5e9d33e496de3dacaa4328 (0) &Acct-Unique-Session-Id := 2ce36d08ca5e9d33e496de3dacaa4328 (0) } # update request = noop (0) } # else = noop (0) } # policy acct_unique = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "testuser", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) [files] = noop (0) } # preacct = ok (0) # Executing section accounting from file /usr/local/etc/raddb/sites-enabled/default (0) accounting { (0) detail: EXPAND /usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d (0) detail: --> /usr/local/var/log/radius/radacct/192.168.1.200/detail-20250115 (0) detail: /usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d expands to /usr/local/var/log/radius/radacct/192.168.1.200/detail-20250115 (0) detail: EXPAND %t (0) detail: --> Wed Jan 15 13:54:49 2025 (0) [detail] = ok (0) [unix] = ok (0) [exec] = noop (0) attr_filter.accounting_response: EXPAND %{User-Name} (0) attr_filter.accounting_response: --> testuser (0) attr_filter.accounting_response: Matched entry DEFAULT at line 12 (0) [attr_filter.accounting_response] = updated (0) policy is_redundant_partner { (0) if ( "%{Packet-src-IP-Address}" == "192.168.1.216" ) { (0) EXPAND %{Packet-src-IP-Address} (0) --> 192.168.1.200 (0) if ( "%{Packet-src-IP-Address}" == "192.168.1.216" ) -> FALSE (0) [noop] = noop (0) } # policy is_redundant_partner = noop (0) if (noop) { (0) if (noop) -> TRUE (0) if (noop) { (0) detail_redundant2: EXPAND /var/data/redundant2/detail (0) detail_redundant2: --> /var/data/redundant2/detail (0) detail_redundant2: /var/data/redundant2/detail expands to /var/data/redundant2/detail (0) detail_redundant2: EXPAND %t (0) detail_redundant2: --> Wed Jan 15 13:54:49 2025 (0) [detail_redundant2] = ok (0) } # if (noop) = ok (0) } # accounting = updated (0) Sent Accounting-Response Id 1 from 192.168.1.204:1813 to 192.168.1.200:61807 length 20 (0) Finished request (0) Cleaning up request packet ID 1 with timestamp +6 due to done Ready to process requests detail (/var/data/redundant2/detail): Polling for detail file detail (/var/data/redundant2/detail): Renaming /var/data/redundant2/detail -> /var/data/redundant2/detail.work detail (/var/data/redundant2/detail): Read packet from /var/data/redundant2/detail.work User-Name = "testuser" Acct-Status-Type = Start Acct-Session-Id = "8592" NAS-IP-Address = 192.168.1.200 Event-Timestamp = "Jan 15 2025 13:54:49 JST" Tmp-String-9 = "ai:" Acct-Unique-Session-Id = "2ce36d08ca5e9d33e496de3dacaa4328" Packet-Original-Timestamp = "Jan 15 2025 13:54:48 JST" Acct-Delay-Time = 0 Packet-Transmit-Counter = 1 (1) # Executing section accounting from file /usr/local/etc/raddb/sites-enabled/redundant-radrelay-2 (1) accounting { (1) update control { (1) Proxy-To-Realm := "redundant-2" (1) } # update control = noop (1) } # accounting = noop (1) Starting proxy to home server 192.168.1.216 port 1813 (1) server redundant-2-server { (1) } (1) Proxying request to home server 192.168.1.216 port 1813 timeout 5.000000 Waking up in 0.3 seconds. (1) Expecting proxy response no later than 4.666454 seconds from now Waking up in 4.6 seconds. (1) No proxy response, giving up on request and marking it done Marking home server 192.168.1.216 port 1813 as zombie (it has not responded in 5.000000 seconds). PING: Waiting 4 seconds for response to ping (2) Sent Status-Server Id 74 from 0.0.0.0:44103 to 192.168.1.216:1813 length 70 (2) Message-Authenticator := 0x00 (2) NAS-Identifier := "Status Check 0. Are you alive?" PING: Next status packet in 30 seconds (1) ERROR: Failing proxied request for user "testuser", due to lack of any response from home server 192.168.1.216 port 1813 (1) Clearing existing &reply: attributes (1) Found Post-Proxy-Type Fail-Accounting (1) server redundant-2-server { (1) Post-Proxy-Type sub-section not found. Ignoring. (1) } (1) detail (/var/data/redundant2/detail): No response to request. Will retry in 30 seconds (1) Finished request (1) Cleaning up request packet ID 0 with timestamp +7 due to done Waking up in 3.9 seconds. No response to status check 2 ID 74 for home server 192.168.1.216 port 1813 zsh: segmentation fault sudo /usr/local/sbin/radiusd -X ========================================================================== This issue has been reported previously: https://github.com/FreeRADIUS/freeradius-server/issues/5485 We would appreciate your prompt assistance in resolving this issue. Thank you for your attention to this matter. Best regards,

1 0

Re: Add TLS version to logs with linelog in FreeRADIUS 3.2.4
by Dominic Stalder 14 Jan '25

14 Jan '25

Thanks. > OK. I suspect the problem is your local mailing system then. No one else has issues. You do not have to guess / suspect, I am pretty sure it is on our side, but it is hard do find this needle in a haystack in this kind of big setup. Strangely it was only related to this explicit thread "Add TLS version to logs with linelog in FreeRADIUS 3.2.4". > Please post the *full* debug output. Here we go: (182) Received Access-Request Id 31 from 9.9.9.9:60533 to 130.92.10.33:1812 length 446 (182) User-Name = "xyz(a)unibe.ch" (182) Service-Type = Framed-User (182) Cisco-AVPair = "service-type=Framed" (182) Framed-MTU = 1485 (182) EAP-Message = 0x0201001d01646f6d696e69632e7374616c64657240756e6962652e6368 (182) Message-Authenticator = 0x11a30dec371519f50eb0809f117144db (182) Cisco-AVPair = "audit-session-id=0F2A5C820000093C2FFBA7DF" (182) Cisco-AVPair = "method=dot1x" (182) Cisco-AVPair = "client-iif-id=3724547122" (182) Cisco-AVPair = "vlan-id=1876" (182) NAS-IP-Address = 9.9.9.9 (182) NAS-Port-Type = Wireless-802.11 (182) NAS-Port = 4211 (182) Cisco-AVPair = "cisco-wlan-ssid=eduroam" (182) Cisco-AVPair = "wlan-profile-name=eduroam-DEV" (182) Called-Station-Id = "60-b9-c0-04-c4-40:eduroam" (182) Calling-Station-Id = "22-e0-73-f2-50-23" (182) Airespace-Wlan-Id = 98 (182) NAS-Identifier = "60-b9-c0-04-c4-40:eduroam" (182) WLAN-Group-Cipher = 1027076 (182) WLAN-Pairwise-Cipher = 1027076 (182) WLAN-AKM-Suite = 1027075 (182) # Executing section authorize from file /etc/freeradius/sites-enabled/default (182) authorize { (182) policy rewrite_called_station_id { (182) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (182) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) -> TRUE (182) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (182) update request { (182) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (182) --> 60-B9-C0-04-C4-40 (182) &Called-Station-Id := 60-B9-C0-04-C4-40 (182) } # update request = noop (182) if ("%{8}") { (182) EXPAND %{8} (182) --> eduroam (182) if ("%{8}") -> TRUE (182) if ("%{8}") { (182) update request { (182) EXPAND %{8} (182) --> eduroam (182) &Called-Station-SSID := eduroam (182) EXPAND %{Called-Station-Id}:%{8} (182) --> 60-B9-C0-04-C4-40:eduroam (182) &Called-Station-Id := 60-B9-C0-04-C4-40:eduroam (182) } # update request = noop (182) } # if ("%{8}") = noop (182) [updated] = updated (182) } # if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) = updated (182) ... skipping else: Preceding "if" was taken (182) } # policy rewrite_called_station_id = updated (182) policy rewrite_calling_station_id { (182) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (182) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) -> TRUE (182) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (182) update request { (182) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (182) --> 22-E0-73-F2-50-23 (182) &Calling-Station-Id := 22-E0-73-F2-50-23 (182) EXPAND %{toupper:%{1}:%{2}:%{3}:%{4}:%{5}:%{6}} (182) --> 22:E0:73:F2:50:23 (182) &locMacAuth-Calling-Station-Id := 22:E0:73:F2:50:23 (182) } # update request = noop (182) [updated] = updated (182) } # if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) = updated (182) ... skipping else: Preceding "if" was taken (182) } # policy rewrite_calling_station_id = updated (182) if (NAS-Identifier == "uvisrz0215.insel.ch") { (182) if (NAS-Identifier == "uvisrz0215.insel.ch") -> FALSE (182) if (Service-Type == Call-Check) { (182) if (Service-Type == Call-Check) -> FALSE (182) if (Packet-Src-IP-Address == 130.59.31.24 || Packet-Src-IP-Address == 130.59.31.25) { (182) EXPAND Packet-Src-IP-Address (182) --> 9.9.9.9 (182) EXPAND Packet-Src-IP-Address (182) --> 9.9.9.9 (182) if (Packet-Src-IP-Address == 130.59.31.24 || Packet-Src-IP-Address == 130.59.31.25) -> FALSE (182) if (EAP-Message) { (182) if (EAP-Message) -> TRUE (182) if (EAP-Message) { (182) policy filter_username { (182) if (&User-Name) { (182) if (&User-Name) -> TRUE (182) if (&User-Name) { (182) if (&User-Name =~ / /) { (182) if (&User-Name =~ / /) -> FALSE (182) if (&User-Name =~ /@[^@]*@/ ) { (182) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (182) if (&User-Name =~ /\.\./ ) { (182) if (&User-Name =~ /\.\./ ) -> FALSE (182) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (182) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (182) if (&User-Name =~ /\.$/) { (182) if (&User-Name =~ /\.$/) -> FALSE (182) if (&User-Name =~ /(a)\./) { (182) if (&User-Name =~ /(a)\./) -> FALSE (182) } # if (&User-Name) = updated (182) } # policy filter_username = updated (182) suffix: Checking for suffix after "@" (182) suffix: Looking up realm "unibe.ch" for User-Name = "xyz(a)unibe.ch" (182) suffix: Found realm "UNIBE.CH" (182) suffix: Adding Realm = "UNIBE.CH" (182) suffix: Authentication realm is LOCAL (182) [suffix] = ok (182) policy deny_no_realm { (182) if (User-Name && (User-Name !~ /@/)) { (182) if (User-Name && (User-Name !~ /@/)) -> FALSE (182) } # policy deny_no_realm = updated (182) update request { (182) EXPAND %{toupper:%{Realm}} (182) --> UNIBE.CH (182) Realm := UNIBE.CH (182) } # update request = noop (182) eap: Peer sent EAP Response (code 2) ID 1 length 29 (182) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (182) [eap] = ok (182) } # if (EAP-Message) = ok (182) } # authorize = updated (182) Found Auth-Type = eap (182) # Executing group from file /etc/freeradius/sites-enabled/default (182) Auth-Type eap { (182) eap: Peer sent packet with method EAP Identity (1) (182) eap: Calling submodule eap_peap to process data (182) eap_peap: (TLS) PEAP -Initiating new session (182) eap: Sending EAP Request (code 1) ID 2 length 6 (182) eap: EAP session adding &reply:State = 0xcf8ae573cf88fce6 (182) [eap] = handled (182) if (handled && (Response-Packet-Type == Access-Challenge)) { (182) EXPAND Response-Packet-Type (182) --> Access-Challenge (182) if (handled && (Response-Packet-Type == Access-Challenge)) -> TRUE (182) if (handled && (Response-Packet-Type == Access-Challenge)) { (182) attr_filter.access_challenge: EXPAND %{User-Name} (182) attr_filter.access_challenge: --> xyz(a)unibe.ch (182) attr_filter.access_challenge: Matched entry DEFAULT at line 12 (182) [attr_filter.access_challenge.post-auth] = updated (182) [handled] = handled (182) } # if (handled && (Response-Packet-Type == Access-Challenge)) = handled (182) } # Auth-Type eap = handled (182) Using Post-Auth-Type Challenge (182) Post-Auth-Type sub-section not found. Ignoring. (182) # Executing group from file /etc/freeradius/sites-enabled/default (182) session-state: Saving cached attributes (182) Framed-MTU = 1014 (182) Sent Access-Challenge Id 31 from 130.92.10.33:1812 to 9.9.9.9:60533 length 64 (182) EAP-Message = 0x010200061920 (182) Message-Authenticator = 0x00000000000000000000000000000000 (182) State = 0xcf8ae573cf88fce6e3b6e72de6bf5cbc (182) Finished request Waking up in 4.9 seconds. (183) Received Access-Request Id 39 from 9.9.9.9:60533 to 130.92.10.33:1812 length 596 (183) User-Name = "xyz(a)unibe.ch" (183) Service-Type = Framed-User (183) Cisco-AVPair = "service-type=Framed" (183) Framed-MTU = 1485 (183) EAP-Message = 0x020200a119800000009716030100920100008e030367374aaa0dddaf0e7d100625e3cfeeb8cd6518161994daa1847ad3002739d57600002c00ffc02cc02bc024c023c00ac009c008c030c02fc028c027c014c013c012009d009c003d003c0035002f000a01000039000a00080006001700180019000b00020100000d00120010040102010501060104030203050306030005000501000000000012000000170000 (183) Message-Authenticator = 0x29862be28b4764a547e61644a45d82bf (183) Cisco-AVPair = "audit-session-id=0F2A5C820000093C2FFBA7DF" (183) Cisco-AVPair = "method=dot1x" (183) Cisco-AVPair = "client-iif-id=3724547122" (183) Cisco-AVPair = "vlan-id=1876" (183) NAS-IP-Address = 9.9.9.9 (183) NAS-Port-Type = Wireless-802.11 (183) NAS-Port = 4211 (183) State = 0xcf8ae573cf88fce6e3b6e72de6bf5cbc (183) Cisco-AVPair = "cisco-wlan-ssid=eduroam" (183) Cisco-AVPair = "wlan-profile-name=eduroam-DEV" (183) Called-Station-Id = "60-b9-c0-04-c4-40:eduroam" (183) Calling-Station-Id = "22-e0-73-f2-50-23" (183) Airespace-Wlan-Id = 98 (183) NAS-Identifier = "60-b9-c0-04-c4-40:eduroam" (183) WLAN-Group-Cipher = 1027076 (183) WLAN-Pairwise-Cipher = 1027076 (183) WLAN-AKM-Suite = 1027075 (183) Restoring &session-state (183) &session-state:Framed-MTU = 1014 (183) # Executing section authorize from file /etc/freeradius/sites-enabled/default (183) authorize { (183) policy rewrite_called_station_id { (183) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (183) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) -> TRUE (183) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (183) update request { (183) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (183) --> 60-B9-C0-04-C4-40 (183) &Called-Station-Id := 60-B9-C0-04-C4-40 (183) } # update request = noop (183) if ("%{8}") { (183) EXPAND %{8} (183) --> eduroam (183) if ("%{8}") -> TRUE (183) if ("%{8}") { (183) update request { (183) EXPAND %{8} (183) --> eduroam (183) &Called-Station-SSID := eduroam (183) EXPAND %{Called-Station-Id}:%{8} (183) --> 60-B9-C0-04-C4-40:eduroam (183) &Called-Station-Id := 60-B9-C0-04-C4-40:eduroam (183) } # update request = noop (183) } # if ("%{8}") = noop (183) [updated] = updated (183) } # if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) = updated (183) ... skipping else: Preceding "if" was taken (183) } # policy rewrite_called_station_id = updated (183) policy rewrite_calling_station_id { (183) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (183) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) -> TRUE (183) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (183) update request { (183) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (183) --> 22-E0-73-F2-50-23 (183) &Calling-Station-Id := 22-E0-73-F2-50-23 (183) EXPAND %{toupper:%{1}:%{2}:%{3}:%{4}:%{5}:%{6}} (183) --> 22:E0:73:F2:50:23 (183) &locMacAuth-Calling-Station-Id := 22:E0:73:F2:50:23 (183) } # update request = noop (183) [updated] = updated (183) } # if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) = updated (183) ... skipping else: Preceding "if" was taken (183) } # policy rewrite_calling_station_id = updated (183) if (NAS-Identifier == "uvisrz0215.insel.ch") { (183) if (NAS-Identifier == "uvisrz0215.insel.ch") -> FALSE (183) if (Service-Type == Call-Check) { (183) if (Service-Type == Call-Check) -> FALSE (183) if (Packet-Src-IP-Address == 130.59.31.24 || Packet-Src-IP-Address == 130.59.31.25) { (183) EXPAND Packet-Src-IP-Address (183) --> 9.9.9.9 (183) EXPAND Packet-Src-IP-Address (183) --> 9.9.9.9 (183) if (Packet-Src-IP-Address == 130.59.31.24 || Packet-Src-IP-Address == 130.59.31.25) -> FALSE (183) if (EAP-Message) { (183) if (EAP-Message) -> TRUE (183) if (EAP-Message) { (183) policy filter_username { (183) if (&User-Name) { (183) if (&User-Name) -> TRUE (183) if (&User-Name) { (183) if (&User-Name =~ / /) { (183) if (&User-Name =~ / /) -> FALSE (183) if (&User-Name =~ /@[^@]*@/ ) { (183) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (183) if (&User-Name =~ /\.\./ ) { (183) if (&User-Name =~ /\.\./ ) -> FALSE (183) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (183) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (183) if (&User-Name =~ /\.$/) { (183) if (&User-Name =~ /\.$/) -> FALSE (183) if (&User-Name =~ /(a)\./) { (183) if (&User-Name =~ /(a)\./) -> FALSE (183) } # if (&User-Name) = updated (183) } # policy filter_username = updated (183) suffix: Checking for suffix after "@" (183) suffix: Looking up realm "unibe.ch" for User-Name = "xyz(a)unibe.ch" (183) suffix: Found realm "UNIBE.CH" (183) suffix: Adding Realm = "UNIBE.CH" (183) suffix: Authentication realm is LOCAL (183) [suffix] = ok (183) policy deny_no_realm { (183) if (User-Name && (User-Name !~ /@/)) { (183) if (User-Name && (User-Name !~ /@/)) -> FALSE (183) } # policy deny_no_realm = updated (183) update request { (183) EXPAND %{toupper:%{Realm}} (183) --> UNIBE.CH (183) Realm := UNIBE.CH (183) } # update request = noop (183) eap: Peer sent EAP Response (code 2) ID 2 length 161 (183) eap: Continuing tunnel setup (183) [eap] = ok (183) } # if (EAP-Message) = ok (183) } # authorize = updated (183) Found Auth-Type = eap (183) # Executing group from file /etc/freeradius/sites-enabled/default (183) Auth-Type eap { (183) eap: Removing EAP session with state 0xcf8ae573cf88fce6 (183) eap: Previous EAP request found for state 0xcf8ae573cf88fce6, released from the list (183) eap: Peer sent packet with method EAP PEAP (25) (183) eap: Calling submodule eap_peap to process data (183) eap_peap: (TLS) EAP Peer says that the final record size will be 151 bytes (183) eap_peap: (TLS) EAP Got all data (151 bytes) (183) eap_peap: (TLS) PEAP - Handshake state - before SSL initialization (183) eap_peap: (TLS) PEAP - Handshake state - Server before SSL initialization (183) eap_peap: (TLS) PEAP - Handshake state - Server before SSL initialization (183) eap_peap: (TLS) PEAP - recv TLS 1.3 Handshake, ClientHello (183) eap_peap: (TLS) PEAP - Handshake state - Server SSLv3/TLS read client hello (183) eap_peap: (TLS) PEAP - send TLS 1.2 Handshake, ServerHello (183) eap_peap: (TLS) PEAP - Handshake state - Server SSLv3/TLS write server hello (183) eap_peap: (TLS) PEAP - send TLS 1.2 Handshake, Certificate (183) eap_peap: (TLS) PEAP - Handshake state - Server SSLv3/TLS write certificate (183) eap_peap: (TLS) PEAP - send TLS 1.2 Handshake, ServerKeyExchange (183) eap_peap: (TLS) PEAP - Handshake state - Server SSLv3/TLS write key exchange (183) eap_peap: (TLS) PEAP - send TLS 1.2 Handshake, ServerHelloDone (183) eap_peap: (TLS) PEAP - Handshake state - Server SSLv3/TLS write server done (183) eap_peap: (TLS) PEAP - Server : Need to read more data: SSLv3/TLS write server done (183) eap_peap: (TLS) PEAP - In Handshake Phase (183) eap: Sending EAP Request (code 1) ID 3 length 1024 (183) eap: EAP session adding &reply:State = 0xcf8ae573ce89fce6 (183) [eap] = handled (183) if (handled && (Response-Packet-Type == Access-Challenge)) { (183) EXPAND Response-Packet-Type (183) --> Access-Challenge (183) if (handled && (Response-Packet-Type == Access-Challenge)) -> TRUE (183) if (handled && (Response-Packet-Type == Access-Challenge)) { (183) attr_filter.access_challenge: EXPAND %{User-Name} (183) attr_filter.access_challenge: --> xyz(a)unibe.ch (183) attr_filter.access_challenge: Matched entry DEFAULT at line 12 (183) [attr_filter.access_challenge.post-auth] = updated (183) [handled] = handled (183) } # if (handled && (Response-Packet-Type == Access-Challenge)) = handled (183) } # Auth-Type eap = handled (183) Using Post-Auth-Type Challenge (183) Post-Auth-Type sub-section not found. Ignoring. (183) # Executing group from file /etc/freeradius/sites-enabled/default (183) session-state: Saving cached attributes (183) Framed-MTU = 1014 (183) TLS-Session-Information = "(TLS) PEAP - recv TLS 1.3 Handshake, ClientHello" (183) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerHello" (183) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, Certificate" (183) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerKeyExchange" (183) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerHelloDone" (183) Sent Access-Challenge Id 39 from 130.92.10.33:1812 to 9.9.9.9:60533 length 1090 (183) EAP-Message = 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 (183) Message-Authenticator = 0x00000000000000000000000000000000 (183) State = 0xcf8ae573ce89fce6e3b6e72de6bf5cbc (183) Finished request Waking up in 4.9 seconds. (184) Received Access-Request Id 47 from 9.9.9.9:60533 to 130.92.10.33:1812 length 441 (184) User-Name = "xyz(a)unibe.ch" (184) Service-Type = Framed-User (184) Cisco-AVPair = "service-type=Framed" (184) Framed-MTU = 1485 (184) EAP-Message = 0x020300061900 (184) Message-Authenticator = 0xf94531ec1c265e936b60a676448e5edf (184) Cisco-AVPair = "audit-session-id=0F2A5C820000093C2FFBA7DF" (184) Cisco-AVPair = "method=dot1x" (184) Cisco-AVPair = "client-iif-id=3724547122" (184) Cisco-AVPair = "vlan-id=1876" (184) NAS-IP-Address = 9.9.9.9 (184) NAS-Port-Type = Wireless-802.11 (184) NAS-Port = 4211 (184) State = 0xcf8ae573ce89fce6e3b6e72de6bf5cbc (184) Cisco-AVPair = "cisco-wlan-ssid=eduroam" (184) Cisco-AVPair = "wlan-profile-name=eduroam-DEV" (184) Called-Station-Id = "60-b9-c0-04-c4-40:eduroam" (184) Calling-Station-Id = "22-e0-73-f2-50-23" (184) Airespace-Wlan-Id = 98 (184) NAS-Identifier = "60-b9-c0-04-c4-40:eduroam" (184) WLAN-Group-Cipher = 1027076 (184) WLAN-Pairwise-Cipher = 1027076 (184) WLAN-AKM-Suite = 1027075 (184) Restoring &session-state (184) &session-state:Framed-MTU = 1014 (184) &session-state:TLS-Session-Information = "(TLS) PEAP - recv TLS 1.3 Handshake, ClientHello" (184) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerHello" (184) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, Certificate" (184) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerKeyExchange" (184) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerHelloDone" (184) # Executing section authorize from file /etc/freeradius/sites-enabled/default (184) authorize { (184) policy rewrite_called_station_id { (184) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (184) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) -> TRUE (184) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (184) update request { (184) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (184) --> 60-B9-C0-04-C4-40 (184) &Called-Station-Id := 60-B9-C0-04-C4-40 (184) } # update request = noop (184) if ("%{8}") { (184) EXPAND %{8} (184) --> eduroam (184) if ("%{8}") -> TRUE (184) if ("%{8}") { (184) update request { (184) EXPAND %{8} (184) --> eduroam (184) &Called-Station-SSID := eduroam (184) EXPAND %{Called-Station-Id}:%{8} (184) --> 60-B9-C0-04-C4-40:eduroam (184) &Called-Station-Id := 60-B9-C0-04-C4-40:eduroam (184) } # update request = noop (184) } # if ("%{8}") = noop (184) [updated] = updated (184) } # if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) = updated (184) ... skipping else: Preceding "if" was taken (184) } # policy rewrite_called_station_id = updated (184) policy rewrite_calling_station_id { (184) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (184) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) -> TRUE (184) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (184) update request { (184) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (184) --> 22-E0-73-F2-50-23 (184) &Calling-Station-Id := 22-E0-73-F2-50-23 (184) EXPAND %{toupper:%{1}:%{2}:%{3}:%{4}:%{5}:%{6}} (184) --> 22:E0:73:F2:50:23 (184) &locMacAuth-Calling-Station-Id := 22:E0:73:F2:50:23 (184) } # update request = noop (184) [updated] = updated (184) } # if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) = updated (184) ... skipping else: Preceding "if" was taken (184) } # policy rewrite_calling_station_id = updated (184) if (NAS-Identifier == "uvisrz0215.insel.ch") { (184) if (NAS-Identifier == "uvisrz0215.insel.ch") -> FALSE (184) if (Service-Type == Call-Check) { (184) if (Service-Type == Call-Check) -> FALSE (184) if (Packet-Src-IP-Address == 130.59.31.24 || Packet-Src-IP-Address == 130.59.31.25) { (184) EXPAND Packet-Src-IP-Address (184) --> 9.9.9.9 (184) EXPAND Packet-Src-IP-Address (184) --> 9.9.9.9 (184) if (Packet-Src-IP-Address == 130.59.31.24 || Packet-Src-IP-Address == 130.59.31.25) -> FALSE (184) if (EAP-Message) { (184) if (EAP-Message) -> TRUE (184) if (EAP-Message) { (184) policy filter_username { (184) if (&User-Name) { (184) if (&User-Name) -> TRUE (184) if (&User-Name) { (184) if (&User-Name =~ / /) { (184) if (&User-Name =~ / /) -> FALSE (184) if (&User-Name =~ /@[^@]*@/ ) { (184) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (184) if (&User-Name =~ /\.\./ ) { (184) if (&User-Name =~ /\.\./ ) -> FALSE (184) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (184) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (184) if (&User-Name =~ /\.$/) { (184) if (&User-Name =~ /\.$/) -> FALSE (184) if (&User-Name =~ /(a)\./) { (184) if (&User-Name =~ /(a)\./) -> FALSE (184) } # if (&User-Name) = updated (184) } # policy filter_username = updated (184) suffix: Checking for suffix after "@" (184) suffix: Looking up realm "unibe.ch" for User-Name = "xyz(a)unibe.ch" (184) suffix: Found realm "UNIBE.CH" (184) suffix: Adding Realm = "UNIBE.CH" (184) suffix: Authentication realm is LOCAL (184) [suffix] = ok (184) policy deny_no_realm { (184) if (User-Name && (User-Name !~ /@/)) { (184) if (User-Name && (User-Name !~ /@/)) -> FALSE (184) } # policy deny_no_realm = updated (184) update request { (184) EXPAND %{toupper:%{Realm}} (184) --> UNIBE.CH (184) Realm := UNIBE.CH (184) } # update request = noop (184) eap: Peer sent EAP Response (code 2) ID 3 length 6 (184) eap: Continuing tunnel setup (184) [eap] = ok (184) } # if (EAP-Message) = ok (184) } # authorize = updated (184) Found Auth-Type = eap (184) # Executing group from file /etc/freeradius/sites-enabled/default (184) Auth-Type eap { (184) eap: Removing EAP session with state 0xcf8ae573ce89fce6 (184) eap: Previous EAP request found for state 0xcf8ae573ce89fce6, released from the list (184) eap: Peer sent packet with method EAP PEAP (25) (184) eap: Calling submodule eap_peap to process data (184) eap_peap: (TLS) Peer ACKed our handshake fragment (184) eap: Sending EAP Request (code 1) ID 4 length 1020 (184) eap: EAP session adding &reply:State = 0xcf8ae573cd8efce6 (184) [eap] = handled (184) if (handled && (Response-Packet-Type == Access-Challenge)) { (184) EXPAND Response-Packet-Type (184) --> Access-Challenge (184) if (handled && (Response-Packet-Type == Access-Challenge)) -> TRUE (184) if (handled && (Response-Packet-Type == Access-Challenge)) { (184) attr_filter.access_challenge: EXPAND %{User-Name} (184) attr_filter.access_challenge: --> xyz(a)unibe.ch (184) attr_filter.access_challenge: Matched entry DEFAULT at line 12 (184) [attr_filter.access_challenge.post-auth] = updated (184) [handled] = handled (184) } # if (handled && (Response-Packet-Type == Access-Challenge)) = handled (184) } # Auth-Type eap = handled (184) Using Post-Auth-Type Challenge (184) Post-Auth-Type sub-section not found. Ignoring. (184) # Executing group from file /etc/freeradius/sites-enabled/default (184) session-state: Saving cached attributes (184) Framed-MTU = 1014 (184) TLS-Session-Information = "(TLS) PEAP - recv TLS 1.3 Handshake, ClientHello" (184) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerHello" (184) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, Certificate" (184) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerKeyExchange" (184) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerHelloDone" (184) Sent Access-Challenge Id 47 from 130.92.10.33:1812 to 9.9.9.9:60533 length 1086 (184) EAP-Message = 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 (184) Message-Authenticator = 0x00000000000000000000000000000000 (184) State = 0xcf8ae573cd8efce6e3b6e72de6bf5cbc (184) Finished request Waking up in 4.9 seconds. (185) Received Access-Request Id 55 from 9.9.9.9:60533 to 130.92.10.33:1812 length 441 (185) User-Name = "xyz(a)unibe.ch" (185) Service-Type = Framed-User (185) Cisco-AVPair = "service-type=Framed" (185) Framed-MTU = 1485 (185) EAP-Message = 0x020400061900 (185) Message-Authenticator = 0x762039fe48480c9dd55c1af554ae2e9e (185) Cisco-AVPair = "audit-session-id=0F2A5C820000093C2FFBA7DF" (185) Cisco-AVPair = "method=dot1x" (185) Cisco-AVPair = "client-iif-id=3724547122" (185) Cisco-AVPair = "vlan-id=1876" (185) NAS-IP-Address = 9.9.9.9 (185) NAS-Port-Type = Wireless-802.11 (185) NAS-Port = 4211 (185) State = 0xcf8ae573cd8efce6e3b6e72de6bf5cbc (185) Cisco-AVPair = "cisco-wlan-ssid=eduroam" (185) Cisco-AVPair = "wlan-profile-name=eduroam-DEV" (185) Called-Station-Id = "60-b9-c0-04-c4-40:eduroam" (185) Calling-Station-Id = "22-e0-73-f2-50-23" (185) Airespace-Wlan-Id = 98 (185) NAS-Identifier = "60-b9-c0-04-c4-40:eduroam" (185) WLAN-Group-Cipher = 1027076 (185) WLAN-Pairwise-Cipher = 1027076 (185) WLAN-AKM-Suite = 1027075 (185) Restoring &session-state (185) &session-state:Framed-MTU = 1014 (185) &session-state:TLS-Session-Information = "(TLS) PEAP - recv TLS 1.3 Handshake, ClientHello" (185) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerHello" (185) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, Certificate" (185) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerKeyExchange" (185) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerHelloDone" (185) # Executing section authorize from file /etc/freeradius/sites-enabled/default (185) authorize { (185) policy rewrite_called_station_id { (185) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (185) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) -> TRUE (185) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (185) update request { (185) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (185) --> 60-B9-C0-04-C4-40 (185) &Called-Station-Id := 60-B9-C0-04-C4-40 (185) } # update request = noop (185) if ("%{8}") { (185) EXPAND %{8} (185) --> eduroam (185) if ("%{8}") -> TRUE (185) if ("%{8}") { (185) update request { (185) EXPAND %{8} (185) --> eduroam (185) &Called-Station-SSID := eduroam (185) EXPAND %{Called-Station-Id}:%{8} (185) --> 60-B9-C0-04-C4-40:eduroam (185) &Called-Station-Id := 60-B9-C0-04-C4-40:eduroam (185) } # update request = noop (185) } # if ("%{8}") = noop (185) [updated] = updated (185) } # if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) = updated (185) ... skipping else: Preceding "if" was taken (185) } # policy rewrite_called_station_id = updated (185) policy rewrite_calling_station_id { (185) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (185) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) -> TRUE (185) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (185) update request { (185) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (185) --> 22-E0-73-F2-50-23 (185) &Calling-Station-Id := 22-E0-73-F2-50-23 (185) EXPAND %{toupper:%{1}:%{2}:%{3}:%{4}:%{5}:%{6}} (185) --> 22:E0:73:F2:50:23 (185) &locMacAuth-Calling-Station-Id := 22:E0:73:F2:50:23 (185) } # update request = noop (185) [updated] = updated (185) } # if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) = updated (185) ... skipping else: Preceding "if" was taken (185) } # policy rewrite_calling_station_id = updated (185) if (NAS-Identifier == "uvisrz0215.insel.ch") { (185) if (NAS-Identifier == "uvisrz0215.insel.ch") -> FALSE (185) if (Service-Type == Call-Check) { (185) if (Service-Type == Call-Check) -> FALSE (185) if (Packet-Src-IP-Address == 130.59.31.24 || Packet-Src-IP-Address == 130.59.31.25) { (185) EXPAND Packet-Src-IP-Address (185) --> 9.9.9.9 (185) EXPAND Packet-Src-IP-Address (185) --> 9.9.9.9 (185) if (Packet-Src-IP-Address == 130.59.31.24 || Packet-Src-IP-Address == 130.59.31.25) -> FALSE (185) if (EAP-Message) { (185) if (EAP-Message) -> TRUE (185) if (EAP-Message) { (185) policy filter_username { (185) if (&User-Name) { (185) if (&User-Name) -> TRUE (185) if (&User-Name) { (185) if (&User-Name =~ / /) { (185) if (&User-Name =~ / /) -> FALSE (185) if (&User-Name =~ /@[^@]*@/ ) { (185) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (185) if (&User-Name =~ /\.\./ ) { (185) if (&User-Name =~ /\.\./ ) -> FALSE (185) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (185) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (185) if (&User-Name =~ /\.$/) { (185) if (&User-Name =~ /\.$/) -> FALSE (185) if (&User-Name =~ /(a)\./) { (185) if (&User-Name =~ /(a)\./) -> FALSE (185) } # if (&User-Name) = updated (185) } # policy filter_username = updated (185) suffix: Checking for suffix after "@" (185) suffix: Looking up realm "unibe.ch" for User-Name = "xyz(a)unibe.ch" (185) suffix: Found realm "UNIBE.CH" (185) suffix: Adding Realm = "UNIBE.CH" (185) suffix: Authentication realm is LOCAL (185) [suffix] = ok (185) policy deny_no_realm { (185) if (User-Name && (User-Name !~ /@/)) { (185) if (User-Name && (User-Name !~ /@/)) -> FALSE (185) } # policy deny_no_realm = updated (185) update request { (185) EXPAND %{toupper:%{Realm}} (185) --> UNIBE.CH (185) Realm := UNIBE.CH (185) } # update request = noop (185) eap: Peer sent EAP Response (code 2) ID 4 length 6 (185) eap: Continuing tunnel setup (185) [eap] = ok (185) } # if (EAP-Message) = ok (185) } # authorize = updated (185) Found Auth-Type = eap (185) # Executing group from file /etc/freeradius/sites-enabled/default (185) Auth-Type eap { (185) eap: Removing EAP session with state 0xcf8ae573cd8efce6 (185) eap: Previous EAP request found for state 0xcf8ae573cd8efce6, released from the list (185) eap: Peer sent packet with method EAP PEAP (25) (185) eap: Calling submodule eap_peap to process data (185) eap_peap: (TLS) Peer ACKed our handshake fragment (185) eap: Sending EAP Request (code 1) ID 5 length 1020 (185) eap: EAP session adding &reply:State = 0xcf8ae573cc8ffce6 (185) [eap] = handled (185) if (handled && (Response-Packet-Type == Access-Challenge)) { (185) EXPAND Response-Packet-Type (185) --> Access-Challenge (185) if (handled && (Response-Packet-Type == Access-Challenge)) -> TRUE (185) if (handled && (Response-Packet-Type == Access-Challenge)) { (185) attr_filter.access_challenge: EXPAND %{User-Name} (185) attr_filter.access_challenge: --> xyz(a)unibe.ch (185) attr_filter.access_challenge: Matched entry DEFAULT at line 12 (185) [attr_filter.access_challenge.post-auth] = updated (185) [handled] = handled (185) } # if (handled && (Response-Packet-Type == Access-Challenge)) = handled (185) } # Auth-Type eap = handled (185) Using Post-Auth-Type Challenge (185) Post-Auth-Type sub-section not found. Ignoring. (185) # Executing group from file /etc/freeradius/sites-enabled/default (185) session-state: Saving cached attributes (185) Framed-MTU = 1014 (185) TLS-Session-Information = "(TLS) PEAP - recv TLS 1.3 Handshake, ClientHello" (185) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerHello" (185) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, Certificate" (185) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerKeyExchange" (185) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerHelloDone" (185) Sent Access-Challenge Id 55 from 130.92.10.33:1812 to 9.9.9.9:60533 length 1086 (185) EAP-Message = 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 (185) Message-Authenticator = 0x00000000000000000000000000000000 (185) State = 0xcf8ae573cc8ffce6e3b6e72de6bf5cbc (185) Finished request Waking up in 4.9 seconds. (186) Received Access-Request Id 63 from 9.9.9.9:60533 to 130.92.10.33:1812 length 441 (186) User-Name = "xyz(a)unibe.ch" (186) Service-Type = Framed-User (186) Cisco-AVPair = "service-type=Framed" (186) Framed-MTU = 1485 (186) EAP-Message = 0x020500061900 (186) Message-Authenticator = 0xe9653667a164bcf3999f9734716b49db (186) Cisco-AVPair = "audit-session-id=0F2A5C820000093C2FFBA7DF" (186) Cisco-AVPair = "method=dot1x" (186) Cisco-AVPair = "client-iif-id=3724547122" (186) Cisco-AVPair = "vlan-id=1876" (186) NAS-IP-Address = 9.9.9.9 (186) NAS-Port-Type = Wireless-802.11 (186) NAS-Port = 4211 (186) State = 0xcf8ae573cc8ffce6e3b6e72de6bf5cbc (186) Cisco-AVPair = "cisco-wlan-ssid=eduroam" (186) Cisco-AVPair = "wlan-profile-name=eduroam-DEV" (186) Called-Station-Id = "60-b9-c0-04-c4-40:eduroam" (186) Calling-Station-Id = "22-e0-73-f2-50-23" (186) Airespace-Wlan-Id = 98 (186) NAS-Identifier = "60-b9-c0-04-c4-40:eduroam" (186) WLAN-Group-Cipher = 1027076 (186) WLAN-Pairwise-Cipher = 1027076 (186) WLAN-AKM-Suite = 1027075 (186) Restoring &session-state (186) &session-state:Framed-MTU = 1014 (186) &session-state:TLS-Session-Information = "(TLS) PEAP - recv TLS 1.3 Handshake, ClientHello" (186) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerHello" (186) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, Certificate" (186) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerKeyExchange" (186) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerHelloDone" (186) # Executing section authorize from file /etc/freeradius/sites-enabled/default (186) authorize { (186) policy rewrite_called_station_id { (186) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (186) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) -> TRUE (186) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (186) update request { (186) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (186) --> 60-B9-C0-04-C4-40 (186) &Called-Station-Id := 60-B9-C0-04-C4-40 (186) } # update request = noop (186) if ("%{8}") { (186) EXPAND %{8} (186) --> eduroam (186) if ("%{8}") -> TRUE (186) if ("%{8}") { (186) update request { (186) EXPAND %{8} (186) --> eduroam (186) &Called-Station-SSID := eduroam (186) EXPAND %{Called-Station-Id}:%{8} (186) --> 60-B9-C0-04-C4-40:eduroam (186) &Called-Station-Id := 60-B9-C0-04-C4-40:eduroam (186) } # update request = noop (186) } # if ("%{8}") = noop (186) [updated] = updated (186) } # if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) = updated (186) ... skipping else: Preceding "if" was taken (186) } # policy rewrite_called_station_id = updated (186) policy rewrite_calling_station_id { (186) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (186) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) -> TRUE (186) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (186) update request { (186) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (186) --> 22-E0-73-F2-50-23 (186) &Calling-Station-Id := 22-E0-73-F2-50-23 (186) EXPAND %{toupper:%{1}:%{2}:%{3}:%{4}:%{5}:%{6}} (186) --> 22:E0:73:F2:50:23 (186) &locMacAuth-Calling-Station-Id := 22:E0:73:F2:50:23 (186) } # update request = noop (186) [updated] = updated (186) } # if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) = updated (186) ... skipping else: Preceding "if" was taken (186) } # policy rewrite_calling_station_id = updated (186) if (NAS-Identifier == "uvisrz0215.insel.ch") { (186) if (NAS-Identifier == "uvisrz0215.insel.ch") -> FALSE (186) if (Service-Type == Call-Check) { (186) if (Service-Type == Call-Check) -> FALSE (186) if (Packet-Src-IP-Address == 130.59.31.24 || Packet-Src-IP-Address == 130.59.31.25) { (186) EXPAND Packet-Src-IP-Address (186) --> 9.9.9.9 (186) EXPAND Packet-Src-IP-Address (186) --> 9.9.9.9 (186) if (Packet-Src-IP-Address == 130.59.31.24 || Packet-Src-IP-Address == 130.59.31.25) -> FALSE (186) if (EAP-Message) { (186) if (EAP-Message) -> TRUE (186) if (EAP-Message) { (186) policy filter_username { (186) if (&User-Name) { (186) if (&User-Name) -> TRUE (186) if (&User-Name) { (186) if (&User-Name =~ / /) { (186) if (&User-Name =~ / /) -> FALSE (186) if (&User-Name =~ /@[^@]*@/ ) { (186) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (186) if (&User-Name =~ /\.\./ ) { (186) if (&User-Name =~ /\.\./ ) -> FALSE (186) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (186) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (186) if (&User-Name =~ /\.$/) { (186) if (&User-Name =~ /\.$/) -> FALSE (186) if (&User-Name =~ /(a)\./) { (186) if (&User-Name =~ /(a)\./) -> FALSE (186) } # if (&User-Name) = updated (186) } # policy filter_username = updated (186) suffix: Checking for suffix after "@" (186) suffix: Looking up realm "unibe.ch" for User-Name = "xyz(a)unibe.ch" (186) suffix: Found realm "UNIBE.CH" (186) suffix: Adding Realm = "UNIBE.CH" (186) suffix: Authentication realm is LOCAL (186) [suffix] = ok (186) policy deny_no_realm { (186) if (User-Name && (User-Name !~ /@/)) { (186) if (User-Name && (User-Name !~ /@/)) -> FALSE (186) } # policy deny_no_realm = updated (186) update request { (186) EXPAND %{toupper:%{Realm}} (186) --> UNIBE.CH (186) Realm := UNIBE.CH (186) } # update request = noop (186) eap: Peer sent EAP Response (code 2) ID 5 length 6 (186) eap: Continuing tunnel setup (186) [eap] = ok (186) } # if (EAP-Message) = ok (186) } # authorize = updated (186) Found Auth-Type = eap (186) # Executing group from file /etc/freeradius/sites-enabled/default (186) Auth-Type eap { (186) eap: Removing EAP session with state 0xcf8ae573cc8ffce6 (186) eap: Previous EAP request found for state 0xcf8ae573cc8ffce6, released from the list (186) eap: Peer sent packet with method EAP PEAP (25) (186) eap: Calling submodule eap_peap to process data (186) eap_peap: (TLS) Peer ACKed our handshake fragment (186) eap: Sending EAP Request (code 1) ID 6 length 1020 (186) eap: EAP session adding &reply:State = 0xcf8ae573cb8cfce6 (186) [eap] = handled (186) if (handled && (Response-Packet-Type == Access-Challenge)) { (186) EXPAND Response-Packet-Type (186) --> Access-Challenge (186) if (handled && (Response-Packet-Type == Access-Challenge)) -> TRUE (186) if (handled && (Response-Packet-Type == Access-Challenge)) { (186) attr_filter.access_challenge: EXPAND %{User-Name} (186) attr_filter.access_challenge: --> xyz(a)unibe.ch (186) attr_filter.access_challenge: Matched entry DEFAULT at line 12 (186) [attr_filter.access_challenge.post-auth] = updated (186) [handled] = handled (186) } # if (handled && (Response-Packet-Type == Access-Challenge)) = handled (186) } # Auth-Type eap = handled (186) Using Post-Auth-Type Challenge (186) Post-Auth-Type sub-section not found. Ignoring. (186) # Executing group from file /etc/freeradius/sites-enabled/default (186) session-state: Saving cached attributes (186) Framed-MTU = 1014 (186) TLS-Session-Information = "(TLS) PEAP - recv TLS 1.3 Handshake, ClientHello" (186) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerHello" (186) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, Certificate" (186) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerKeyExchange" (186) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerHelloDone" (186) Sent Access-Challenge Id 63 from 130.92.10.33:1812 to 9.9.9.9:60533 length 1086 (186) EAP-Message = 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 (186) Message-Authenticator = 0x00000000000000000000000000000000 (186) State = 0xcf8ae573cb8cfce6e3b6e72de6bf5cbc (186) Finished request Waking up in 4.9 seconds. (187) Received Access-Request Id 71 from 9.9.9.9:60533 to 130.92.10.33:1812 length 441 (187) User-Name = "xyz(a)unibe.ch" (187) Service-Type = Framed-User (187) Cisco-AVPair = "service-type=Framed" (187) Framed-MTU = 1485 (187) EAP-Message = 0x020600061900 (187) Message-Authenticator = 0x242a03db3080449327126d09317dcedf (187) Cisco-AVPair = "audit-session-id=0F2A5C820000093C2FFBA7DF" (187) Cisco-AVPair = "method=dot1x" (187) Cisco-AVPair = "client-iif-id=3724547122" (187) Cisco-AVPair = "vlan-id=1876" (187) NAS-IP-Address = 9.9.9.9 (187) NAS-Port-Type = Wireless-802.11 (187) NAS-Port = 4211 (187) State = 0xcf8ae573cb8cfce6e3b6e72de6bf5cbc (187) Cisco-AVPair = "cisco-wlan-ssid=eduroam" (187) Cisco-AVPair = "wlan-profile-name=eduroam-DEV" (187) Called-Station-Id = "60-b9-c0-04-c4-40:eduroam" (187) Calling-Station-Id = "22-e0-73-f2-50-23" (187) Airespace-Wlan-Id = 98 (187) NAS-Identifier = "60-b9-c0-04-c4-40:eduroam" (187) WLAN-Group-Cipher = 1027076 (187) WLAN-Pairwise-Cipher = 1027076 (187) WLAN-AKM-Suite = 1027075 (187) Restoring &session-state (187) &session-state:Framed-MTU = 1014 (187) &session-state:TLS-Session-Information = "(TLS) PEAP - recv TLS 1.3 Handshake, ClientHello" (187) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerHello" (187) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, Certificate" (187) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerKeyExchange" (187) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerHelloDone" (187) # Executing section authorize from file /etc/freeradius/sites-enabled/default (187) authorize { (187) policy rewrite_called_station_id { (187) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (187) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) -> TRUE (187) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (187) update request { (187) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (187) --> 60-B9-C0-04-C4-40 (187) &Called-Station-Id := 60-B9-C0-04-C4-40 (187) } # update request = noop (187) if ("%{8}") { (187) EXPAND %{8} (187) --> eduroam (187) if ("%{8}") -> TRUE (187) if ("%{8}") { (187) update request { (187) EXPAND %{8} (187) --> eduroam (187) &Called-Station-SSID := eduroam (187) EXPAND %{Called-Station-Id}:%{8} (187) --> 60-B9-C0-04-C4-40:eduroam (187) &Called-Station-Id := 60-B9-C0-04-C4-40:eduroam (187) } # update request = noop (187) } # if ("%{8}") = noop (187) [updated] = updated (187) } # if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) = updated (187) ... skipping else: Preceding "if" was taken (187) } # policy rewrite_called_station_id = updated (187) policy rewrite_calling_station_id { (187) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (187) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) -> TRUE (187) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (187) update request { (187) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (187) --> 22-E0-73-F2-50-23 (187) &Calling-Station-Id := 22-E0-73-F2-50-23 (187) EXPAND %{toupper:%{1}:%{2}:%{3}:%{4}:%{5}:%{6}} (187) --> 22:E0:73:F2:50:23 (187) &locMacAuth-Calling-Station-Id := 22:E0:73:F2:50:23 (187) } # update request = noop (187) [updated] = updated (187) } # if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) = updated (187) ... skipping else: Preceding "if" was taken (187) } # policy rewrite_calling_station_id = updated (187) if (NAS-Identifier == "uvisrz0215.insel.ch") { (187) if (NAS-Identifier == "uvisrz0215.insel.ch") -> FALSE (187) if (Service-Type == Call-Check) { (187) if (Service-Type == Call-Check) -> FALSE (187) if (Packet-Src-IP-Address == 130.59.31.24 || Packet-Src-IP-Address == 130.59.31.25) { (187) EXPAND Packet-Src-IP-Address (187) --> 9.9.9.9 (187) EXPAND Packet-Src-IP-Address (187) --> 9.9.9.9 (187) if (Packet-Src-IP-Address == 130.59.31.24 || Packet-Src-IP-Address == 130.59.31.25) -> FALSE (187) if (EAP-Message) { (187) if (EAP-Message) -> TRUE (187) if (EAP-Message) { (187) policy filter_username { (187) if (&User-Name) { (187) if (&User-Name) -> TRUE (187) if (&User-Name) { (187) if (&User-Name =~ / /) { (187) if (&User-Name =~ / /) -> FALSE (187) if (&User-Name =~ /@[^@]*@/ ) { (187) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (187) if (&User-Name =~ /\.\./ ) { (187) if (&User-Name =~ /\.\./ ) -> FALSE (187) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (187) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (187) if (&User-Name =~ /\.$/) { (187) if (&User-Name =~ /\.$/) -> FALSE (187) if (&User-Name =~ /(a)\./) { (187) if (&User-Name =~ /(a)\./) -> FALSE (187) } # if (&User-Name) = updated (187) } # policy filter_username = updated (187) suffix: Checking for suffix after "@" (187) suffix: Looking up realm "unibe.ch" for User-Name = "xyz(a)unibe.ch" (187) suffix: Found realm "UNIBE.CH" (187) suffix: Adding Realm = "UNIBE.CH" (187) suffix: Authentication realm is LOCAL (187) [suffix] = ok (187) policy deny_no_realm { (187) if (User-Name && (User-Name !~ /@/)) { (187) if (User-Name && (User-Name !~ /@/)) -> FALSE (187) } # policy deny_no_realm = updated (187) update request { (187) EXPAND %{toupper:%{Realm}} (187) --> UNIBE.CH (187) Realm := UNIBE.CH (187) } # update request = noop (187) eap: Peer sent EAP Response (code 2) ID 6 length 6 (187) eap: Continuing tunnel setup (187) [eap] = ok (187) } # if (EAP-Message) = ok (187) } # authorize = updated (187) Found Auth-Type = eap (187) # Executing group from file /etc/freeradius/sites-enabled/default (187) Auth-Type eap { (187) eap: Removing EAP session with state 0xcf8ae573cb8cfce6 (187) eap: Previous EAP request found for state 0xcf8ae573cb8cfce6, released from the list (187) eap: Peer sent packet with method EAP PEAP (25) (187) eap: Calling submodule eap_peap to process data (187) eap_peap: (TLS) Peer ACKed our handshake fragment (187) eap: Sending EAP Request (code 1) ID 7 length 355 (187) eap: EAP session adding &reply:State = 0xcf8ae573ca8dfce6 (187) [eap] = handled (187) if (handled && (Response-Packet-Type == Access-Challenge)) { (187) EXPAND Response-Packet-Type (187) --> Access-Challenge (187) if (handled && (Response-Packet-Type == Access-Challenge)) -> TRUE (187) if (handled && (Response-Packet-Type == Access-Challenge)) { (187) attr_filter.access_challenge: EXPAND %{User-Name} (187) attr_filter.access_challenge: --> xyz(a)unibe.ch (187) attr_filter.access_challenge: Matched entry DEFAULT at line 12 (187) [attr_filter.access_challenge.post-auth] = updated (187) [handled] = handled (187) } # if (handled && (Response-Packet-Type == Access-Challenge)) = handled (187) } # Auth-Type eap = handled (187) Using Post-Auth-Type Challenge (187) Post-Auth-Type sub-section not found. Ignoring. (187) # Executing group from file /etc/freeradius/sites-enabled/default (187) session-state: Saving cached attributes (187) Framed-MTU = 1014 (187) TLS-Session-Information = "(TLS) PEAP - recv TLS 1.3 Handshake, ClientHello" (187) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerHello" (187) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, Certificate" (187) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerKeyExchange" (187) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerHelloDone" (187) Sent Access-Challenge Id 71 from 130.92.10.33:1812 to 9.9.9.9:60533 length 415 (187) EAP-Message = 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 (187) Message-Authenticator = 0x00000000000000000000000000000000 (187) State = 0xcf8ae573ca8dfce6e3b6e72de6bf5cbc (187) Finished request Waking up in 4.9 seconds. (188) Received Access-Request Id 79 from 9.9.9.9:60533 to 130.92.10.33:1812 length 571 (188) User-Name = "xyz(a)unibe.ch" (188) Service-Type = Framed-User (188) Cisco-AVPair = "service-type=Framed" (188) Framed-MTU = 1485 (188) EAP-Message = 0x0207008819800000007e1603030046100000424104e6595813fcf61f0bcf33212269292b56b96c43fa1c8521b7e9ca6253bc8ba93a42bbf48836d9cd888fe082cfa6fab40327beb814a7fb7f88dd37f9af6caafe2c1403030001011603030028205b847b10fba1568b03991cae85dab7c8553e4b8fbf36eca8a4ec3411939e1e7f4d5270df2d81d8 (188) Message-Authenticator = 0x5dc9e821834fdb1a0dbda25c60505863 (188) Cisco-AVPair = "audit-session-id=0F2A5C820000093C2FFBA7DF" (188) Cisco-AVPair = "method=dot1x" (188) Cisco-AVPair = "client-iif-id=3724547122" (188) Cisco-AVPair = "vlan-id=1876" (188) NAS-IP-Address = 9.9.9.9 (188) NAS-Port-Type = Wireless-802.11 (188) NAS-Port = 4211 (188) State = 0xcf8ae573ca8dfce6e3b6e72de6bf5cbc (188) Cisco-AVPair = "cisco-wlan-ssid=eduroam" (188) Cisco-AVPair = "wlan-profile-name=eduroam-DEV" (188) Called-Station-Id = "60-b9-c0-04-c4-40:eduroam" (188) Calling-Station-Id = "22-e0-73-f2-50-23" (188) Airespace-Wlan-Id = 98 (188) NAS-Identifier = "60-b9-c0-04-c4-40:eduroam" (188) WLAN-Group-Cipher = 1027076 (188) WLAN-Pairwise-Cipher = 1027076 (188) WLAN-AKM-Suite = 1027075 (188) Restoring &session-state (188) &session-state:Framed-MTU = 1014 (188) &session-state:TLS-Session-Information = "(TLS) PEAP - recv TLS 1.3 Handshake, ClientHello" (188) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerHello" (188) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, Certificate" (188) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerKeyExchange" (188) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerHelloDone" (188) # Executing section authorize from file /etc/freeradius/sites-enabled/default (188) authorize { (188) policy rewrite_called_station_id { (188) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (188) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) -> TRUE (188) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (188) update request { (188) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (188) --> 60-B9-C0-04-C4-40 (188) &Called-Station-Id := 60-B9-C0-04-C4-40 (188) } # update request = noop (188) if ("%{8}") { (188) EXPAND %{8} (188) --> eduroam (188) if ("%{8}") -> TRUE (188) if ("%{8}") { (188) update request { (188) EXPAND %{8} (188) --> eduroam (188) &Called-Station-SSID := eduroam (188) EXPAND %{Called-Station-Id}:%{8} (188) --> 60-B9-C0-04-C4-40:eduroam (188) &Called-Station-Id := 60-B9-C0-04-C4-40:eduroam (188) } # update request = noop (188) } # if ("%{8}") = noop (188) [updated] = updated (188) } # if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) = updated (188) ... skipping else: Preceding "if" was taken (188) } # policy rewrite_called_station_id = updated (188) policy rewrite_calling_station_id { (188) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (188) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) -> TRUE (188) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (188) update request { (188) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (188) --> 22-E0-73-F2-50-23 (188) &Calling-Station-Id := 22-E0-73-F2-50-23 (188) EXPAND %{toupper:%{1}:%{2}:%{3}:%{4}:%{5}:%{6}} (188) --> 22:E0:73:F2:50:23 (188) &locMacAuth-Calling-Station-Id := 22:E0:73:F2:50:23 (188) } # update request = noop (188) [updated] = updated (188) } # if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) = updated (188) ... skipping else: Preceding "if" was taken (188) } # policy rewrite_calling_station_id = updated (188) if (NAS-Identifier == "uvisrz0215.insel.ch") { (188) if (NAS-Identifier == "uvisrz0215.insel.ch") -> FALSE (188) if (Service-Type == Call-Check) { (188) if (Service-Type == Call-Check) -> FALSE (188) if (Packet-Src-IP-Address == 130.59.31.24 || Packet-Src-IP-Address == 130.59.31.25) { (188) EXPAND Packet-Src-IP-Address (188) --> 9.9.9.9 (188) EXPAND Packet-Src-IP-Address (188) --> 9.9.9.9 (188) if (Packet-Src-IP-Address == 130.59.31.24 || Packet-Src-IP-Address == 130.59.31.25) -> FALSE (188) if (EAP-Message) { (188) if (EAP-Message) -> TRUE (188) if (EAP-Message) { (188) policy filter_username { (188) if (&User-Name) { (188) if (&User-Name) -> TRUE (188) if (&User-Name) { (188) if (&User-Name =~ / /) { (188) if (&User-Name =~ / /) -> FALSE (188) if (&User-Name =~ /@[^@]*@/ ) { (188) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (188) if (&User-Name =~ /\.\./ ) { (188) if (&User-Name =~ /\.\./ ) -> FALSE (188) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (188) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (188) if (&User-Name =~ /\.$/) { (188) if (&User-Name =~ /\.$/) -> FALSE (188) if (&User-Name =~ /(a)\./) { (188) if (&User-Name =~ /(a)\./) -> FALSE (188) } # if (&User-Name) = updated (188) } # policy filter_username = updated (188) suffix: Checking for suffix after "@" (188) suffix: Looking up realm "unibe.ch" for User-Name = "xyz(a)unibe.ch" (188) suffix: Found realm "UNIBE.CH" (188) suffix: Adding Realm = "UNIBE.CH" (188) suffix: Authentication realm is LOCAL (188) [suffix] = ok (188) policy deny_no_realm { (188) if (User-Name && (User-Name !~ /@/)) { (188) if (User-Name && (User-Name !~ /@/)) -> FALSE (188) } # policy deny_no_realm = updated (188) update request { (188) EXPAND %{toupper:%{Realm}} (188) --> UNIBE.CH (188) Realm := UNIBE.CH (188) } # update request = noop (188) eap: Peer sent EAP Response (code 2) ID 7 length 136 (188) eap: Continuing tunnel setup (188) [eap] = ok (188) } # if (EAP-Message) = ok (188) } # authorize = updated (188) Found Auth-Type = eap (188) # Executing group from file /etc/freeradius/sites-enabled/default (188) Auth-Type eap { (188) eap: Removing EAP session with state 0xcf8ae573ca8dfce6 (188) eap: Previous EAP request found for state 0xcf8ae573ca8dfce6, released from the list (188) eap: Peer sent packet with method EAP PEAP (25) (188) eap: Calling submodule eap_peap to process data (188) eap_peap: (TLS) EAP Peer says that the final record size will be 126 bytes (188) eap_peap: (TLS) EAP Got all data (126 bytes) (188) eap_peap: (TLS) PEAP - Handshake state - Server SSLv3/TLS write server done (188) eap_peap: (TLS) PEAP - recv TLS 1.2 Handshake, ClientKeyExchange (188) eap_peap: (TLS) PEAP - Handshake state - Server SSLv3/TLS read client key exchange (188) eap_peap: (TLS) PEAP - Handshake state - Server SSLv3/TLS read change cipher spec (188) eap_peap: (TLS) PEAP - recv TLS 1.2 Handshake, Finished (188) eap_peap: (TLS) PEAP - Handshake state - Server SSLv3/TLS read finished (188) eap_peap: (TLS) PEAP - send TLS 1.2 ChangeCipherSpec (188) eap_peap: (TLS) PEAP - Handshake state - Server SSLv3/TLS write change cipher spec (188) eap_peap: (TLS) PEAP - send TLS 1.2 Handshake, Finished (188) eap_peap: (TLS) PEAP - Handshake state - Server SSLv3/TLS write finished (188) eap_peap: (TLS) PEAP - Handshake state - SSL negotiation finished successfully (188) eap_peap: (TLS) PEAP - Connection Established (188) eap_peap: TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (188) eap_peap: TLS-Session-Version = "TLS 1.2" (188) eap: Sending EAP Request (code 1) ID 8 length 57 (188) eap: EAP session adding &reply:State = 0xcf8ae573c982fce6 (188) [eap] = handled (188) if (handled && (Response-Packet-Type == Access-Challenge)) { (188) EXPAND Response-Packet-Type (188) --> Access-Challenge (188) if (handled && (Response-Packet-Type == Access-Challenge)) -> TRUE (188) if (handled && (Response-Packet-Type == Access-Challenge)) { (188) attr_filter.access_challenge: EXPAND %{User-Name} (188) attr_filter.access_challenge: --> xyz(a)unibe.ch (188) attr_filter.access_challenge: Matched entry DEFAULT at line 12 (188) [attr_filter.access_challenge.post-auth] = updated (188) [handled] = handled (188) } # if (handled && (Response-Packet-Type == Access-Challenge)) = handled (188) } # Auth-Type eap = handled (188) Using Post-Auth-Type Challenge (188) Post-Auth-Type sub-section not found. Ignoring. (188) # Executing group from file /etc/freeradius/sites-enabled/default (188) session-state: Saving cached attributes (188) Framed-MTU = 1014 (188) TLS-Session-Information = "(TLS) PEAP - recv TLS 1.3 Handshake, ClientHello" (188) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerHello" (188) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, Certificate" (188) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerKeyExchange" (188) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerHelloDone" (188) TLS-Session-Information = "(TLS) PEAP - recv TLS 1.2 Handshake, ClientKeyExchange" (188) TLS-Session-Information = "(TLS) PEAP - recv TLS 1.2 Handshake, Finished" (188) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 ChangeCipherSpec" (188) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, Finished" (188) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (188) TLS-Session-Version = "TLS 1.2" (188) Sent Access-Challenge Id 79 from 130.92.10.33:1812 to 9.9.9.9:60533 length 115 (188) EAP-Message = 0x010800391900140303000101160303002804f99461d03fc2be43b472810aaccc1082398a50bfe278395884ee9a22cacc6e5f0aa86dc8a3021e (188) Message-Authenticator = 0x00000000000000000000000000000000 (188) State = 0xcf8ae573c982fce6e3b6e72de6bf5cbc (188) Finished request Waking up in 2.0 seconds. (189) Received Access-Request Id 87 from 9.9.9.9:60533 to 130.92.10.33:1812 length 441 (189) User-Name = "xyz(a)unibe.ch" (189) Service-Type = Framed-User (189) Cisco-AVPair = "service-type=Framed" (189) Framed-MTU = 1485 (189) EAP-Message = 0x020800061900 (189) Message-Authenticator = 0xa5b00fd17fe7b04da57e577d073ddcf4 (189) Cisco-AVPair = "audit-session-id=0F2A5C820000093C2FFBA7DF" (189) Cisco-AVPair = "method=dot1x" (189) Cisco-AVPair = "client-iif-id=3724547122" (189) Cisco-AVPair = "vlan-id=1876" (189) NAS-IP-Address = 9.9.9.9 (189) NAS-Port-Type = Wireless-802.11 (189) NAS-Port = 4211 (189) State = 0xcf8ae573c982fce6e3b6e72de6bf5cbc (189) Cisco-AVPair = "cisco-wlan-ssid=eduroam" (189) Cisco-AVPair = "wlan-profile-name=eduroam-DEV" (189) Called-Station-Id = "60-b9-c0-04-c4-40:eduroam" (189) Calling-Station-Id = "22-e0-73-f2-50-23" (189) Airespace-Wlan-Id = 98 (189) NAS-Identifier = "60-b9-c0-04-c4-40:eduroam" (189) WLAN-Group-Cipher = 1027076 (189) WLAN-Pairwise-Cipher = 1027076 (189) WLAN-AKM-Suite = 1027075 (189) Restoring &session-state (189) &session-state:Framed-MTU = 1014 (189) &session-state:TLS-Session-Information = "(TLS) PEAP - recv TLS 1.3 Handshake, ClientHello" (189) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerHello" (189) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, Certificate" (189) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerKeyExchange" (189) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerHelloDone" (189) &session-state:TLS-Session-Information = "(TLS) PEAP - recv TLS 1.2 Handshake, ClientKeyExchange" (189) &session-state:TLS-Session-Information = "(TLS) PEAP - recv TLS 1.2 Handshake, Finished" (189) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 ChangeCipherSpec" (189) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, Finished" (189) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (189) &session-state:TLS-Session-Version = "TLS 1.2" (189) # Executing section authorize from file /etc/freeradius/sites-enabled/default (189) authorize { (189) policy rewrite_called_station_id { (189) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (189) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) -> TRUE (189) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (189) update request { (189) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (189) --> 60-B9-C0-04-C4-40 (189) &Called-Station-Id := 60-B9-C0-04-C4-40 (189) } # update request = noop (189) if ("%{8}") { (189) EXPAND %{8} (189) --> eduroam (189) if ("%{8}") -> TRUE (189) if ("%{8}") { (189) update request { (189) EXPAND %{8} (189) --> eduroam (189) &Called-Station-SSID := eduroam (189) EXPAND %{Called-Station-Id}:%{8} (189) --> 60-B9-C0-04-C4-40:eduroam (189) &Called-Station-Id := 60-B9-C0-04-C4-40:eduroam (189) } # update request = noop (189) } # if ("%{8}") = noop (189) [updated] = updated (189) } # if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) = updated (189) ... skipping else: Preceding "if" was taken (189) } # policy rewrite_called_station_id = updated (189) policy rewrite_calling_station_id { (189) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (189) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) -> TRUE (189) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (189) update request { (189) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (189) --> 22-E0-73-F2-50-23 (189) &Calling-Station-Id := 22-E0-73-F2-50-23 (189) EXPAND %{toupper:%{1}:%{2}:%{3}:%{4}:%{5}:%{6}} (189) --> 22:E0:73:F2:50:23 (189) &locMacAuth-Calling-Station-Id := 22:E0:73:F2:50:23 (189) } # update request = noop (189) [updated] = updated (189) } # if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) = updated (189) ... skipping else: Preceding "if" was taken (189) } # policy rewrite_calling_station_id = updated (189) if (NAS-Identifier == "uvisrz0215.insel.ch") { (189) if (NAS-Identifier == "uvisrz0215.insel.ch") -> FALSE (189) if (Service-Type == Call-Check) { (189) if (Service-Type == Call-Check) -> FALSE (189) if (Packet-Src-IP-Address == 130.59.31.24 || Packet-Src-IP-Address == 130.59.31.25) { (189) EXPAND Packet-Src-IP-Address (189) --> 9.9.9.9 (189) EXPAND Packet-Src-IP-Address (189) --> 9.9.9.9 (189) if (Packet-Src-IP-Address == 130.59.31.24 || Packet-Src-IP-Address == 130.59.31.25) -> FALSE (189) if (EAP-Message) { (189) if (EAP-Message) -> TRUE (189) if (EAP-Message) { (189) policy filter_username { (189) if (&User-Name) { (189) if (&User-Name) -> TRUE (189) if (&User-Name) { (189) if (&User-Name =~ / /) { (189) if (&User-Name =~ / /) -> FALSE (189) if (&User-Name =~ /@[^@]*@/ ) { (189) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (189) if (&User-Name =~ /\.\./ ) { (189) if (&User-Name =~ /\.\./ ) -> FALSE (189) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (189) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (189) if (&User-Name =~ /\.$/) { (189) if (&User-Name =~ /\.$/) -> FALSE (189) if (&User-Name =~ /(a)\./) { (189) if (&User-Name =~ /(a)\./) -> FALSE (189) } # if (&User-Name) = updated (189) } # policy filter_username = updated (189) suffix: Checking for suffix after "@" (189) suffix: Looking up realm "unibe.ch" for User-Name = "xyz(a)unibe.ch" (189) suffix: Found realm "UNIBE.CH" (189) suffix: Adding Realm = "UNIBE.CH" (189) suffix: Authentication realm is LOCAL (189) [suffix] = ok (189) policy deny_no_realm { (189) if (User-Name && (User-Name !~ /@/)) { (189) if (User-Name && (User-Name !~ /@/)) -> FALSE (189) } # policy deny_no_realm = updated (189) update request { (189) EXPAND %{toupper:%{Realm}} (189) --> UNIBE.CH (189) Realm := UNIBE.CH (189) } # update request = noop (189) eap: Peer sent EAP Response (code 2) ID 8 length 6 (189) eap: Continuing tunnel setup (189) [eap] = ok (189) } # if (EAP-Message) = ok (189) } # authorize = updated (189) Found Auth-Type = eap (189) # Executing group from file /etc/freeradius/sites-enabled/default (189) Auth-Type eap { (189) eap: Removing EAP session with state 0xcf8ae573c982fce6 (189) eap: Previous EAP request found for state 0xcf8ae573c982fce6, released from the list (189) eap: Peer sent packet with method EAP PEAP (25) (189) eap: Calling submodule eap_peap to process data (189) eap_peap: (TLS) Peer ACKed our handshake fragment. handshake is finished (189) eap_peap: Session established. Decoding tunneled attributes (189) eap_peap: PEAP state TUNNEL ESTABLISHED (189) eap: Sending EAP Request (code 1) ID 9 length 40 (189) eap: EAP session adding &reply:State = 0xcf8ae573c883fce6 (189) [eap] = handled (189) if (handled && (Response-Packet-Type == Access-Challenge)) { (189) EXPAND Response-Packet-Type (189) --> Access-Challenge (189) if (handled && (Response-Packet-Type == Access-Challenge)) -> TRUE (189) if (handled && (Response-Packet-Type == Access-Challenge)) { (189) attr_filter.access_challenge: EXPAND %{User-Name} (189) attr_filter.access_challenge: --> xyz(a)unibe.ch (189) attr_filter.access_challenge: Matched entry DEFAULT at line 12 (189) [attr_filter.access_challenge.post-auth] = updated (189) [handled] = handled (189) } # if (handled && (Response-Packet-Type == Access-Challenge)) = handled (189) } # Auth-Type eap = handled (189) Using Post-Auth-Type Challenge (189) Post-Auth-Type sub-section not found. Ignoring. (189) # Executing group from file /etc/freeradius/sites-enabled/default (189) session-state: Saving cached attributes (189) Framed-MTU = 1014 (189) TLS-Session-Information = "(TLS) PEAP - recv TLS 1.3 Handshake, ClientHello" (189) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerHello" (189) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, Certificate" (189) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerKeyExchange" (189) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerHelloDone" (189) TLS-Session-Information = "(TLS) PEAP - recv TLS 1.2 Handshake, ClientKeyExchange" (189) TLS-Session-Information = "(TLS) PEAP - recv TLS 1.2 Handshake, Finished" (189) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 ChangeCipherSpec" (189) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, Finished" (189) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (189) TLS-Session-Version = "TLS 1.2" (189) Sent Access-Challenge Id 87 from 130.92.10.33:1812 to 9.9.9.9:60533 length 98 (189) EAP-Message = 0x010900281900170303001d04f99461d03fc2bfcba8de001c3d804bdee9841e17c66ad8e895cc716f (189) Message-Authenticator = 0x00000000000000000000000000000000 (189) State = 0xcf8ae573c883fce6e3b6e72de6bf5cbc (189) Finished request Waking up in 2.0 seconds. (190) Received Access-Request Id 95 from 9.9.9.9:60533 to 130.92.10.33:1812 length 495 (190) User-Name = "xyz(a)unibe.ch" (190) Service-Type = Framed-User (190) Cisco-AVPair = "service-type=Framed" (190) Framed-MTU = 1485 (190) EAP-Message = 0x0209003c19001703030031205b847b10fba1571aeefaf72e8f9d6bacb5c5b0c60ea6e48b4fbe8b47377db78af34cb6696f2d542aac549b9d859dfb64 (190) Message-Authenticator = 0x4798ae57b2ed9970df767d1ac0b91c74 (190) Cisco-AVPair = "audit-session-id=0F2A5C820000093C2FFBA7DF" (190) Cisco-AVPair = "method=dot1x" (190) Cisco-AVPair = "client-iif-id=3724547122" (190) Cisco-AVPair = "vlan-id=1876" (190) NAS-IP-Address = 9.9.9.9 (190) NAS-Port-Type = Wireless-802.11 (190) NAS-Port = 4211 (190) State = 0xcf8ae573c883fce6e3b6e72de6bf5cbc (190) Cisco-AVPair = "cisco-wlan-ssid=eduroam" (190) Cisco-AVPair = "wlan-profile-name=eduroam-DEV" (190) Called-Station-Id = "60-b9-c0-04-c4-40:eduroam" (190) Calling-Station-Id = "22-e0-73-f2-50-23" (190) Airespace-Wlan-Id = 98 (190) NAS-Identifier = "60-b9-c0-04-c4-40:eduroam" (190) WLAN-Group-Cipher = 1027076 (190) WLAN-Pairwise-Cipher = 1027076 (190) WLAN-AKM-Suite = 1027075 (190) Restoring &session-state (190) &session-state:Framed-MTU = 1014 (190) &session-state:TLS-Session-Information = "(TLS) PEAP - recv TLS 1.3 Handshake, ClientHello" (190) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerHello" (190) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, Certificate" (190) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerKeyExchange" (190) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerHelloDone" (190) &session-state:TLS-Session-Information = "(TLS) PEAP - recv TLS 1.2 Handshake, ClientKeyExchange" (190) &session-state:TLS-Session-Information = "(TLS) PEAP - recv TLS 1.2 Handshake, Finished" (190) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 ChangeCipherSpec" (190) &session-state:TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, Finished" (190) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (190) &session-state:TLS-Session-Version = "TLS 1.2" (190) # Executing section authorize from file /etc/freeradius/sites-enabled/default (190) authorize { (190) policy rewrite_called_station_id { (190) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (190) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) -> TRUE (190) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (190) update request { (190) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (190) --> 60-B9-C0-04-C4-40 (190) &Called-Station-Id := 60-B9-C0-04-C4-40 (190) } # update request = noop (190) if ("%{8}") { (190) EXPAND %{8} (190) --> eduroam (190) if ("%{8}") -> TRUE (190) if ("%{8}") { (190) update request { (190) EXPAND %{8} (190) --> eduroam (190) &Called-Station-SSID := eduroam (190) EXPAND %{Called-Station-Id}:%{8} (190) --> 60-B9-C0-04-C4-40:eduroam (190) &Called-Station-Id := 60-B9-C0-04-C4-40:eduroam (190) } # update request = noop (190) } # if ("%{8}") = noop (190) [updated] = updated (190) } # if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) = updated (190) ... skipping else: Preceding "if" was taken (190) } # policy rewrite_called_station_id = updated (190) policy rewrite_calling_station_id { (190) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (190) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) -> TRUE (190) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (190) update request { (190) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (190) --> 22-E0-73-F2-50-23 (190) &Calling-Station-Id := 22-E0-73-F2-50-23 (190) EXPAND %{toupper:%{1}:%{2}:%{3}:%{4}:%{5}:%{6}} (190) --> 22:E0:73:F2:50:23 (190) &locMacAuth-Calling-Station-Id := 22:E0:73:F2:50:23 (190) } # update request = noop (190) [updated] = updated (190) } # if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) = updated (190) ... skipping else: Preceding "if" was taken (190) } # policy rewrite_calling_station_id = updated (190) if (NAS-Identifier == "uvisrz0215.insel.ch") { (190) if (NAS-Identifier == "uvisrz0215.insel.ch") -> FALSE (190) if (Service-Type == Call-Check) { (190) if (Service-Type == Call-Check) -> FALSE (190) if (Packet-Src-IP-Address == 130.59.31.24 || Packet-Src-IP-Address == 130.59.31.25) { (190) EXPAND Packet-Src-IP-Address (190) --> 9.9.9.9 (190) EXPAND Packet-Src-IP-Address (190) --> 9.9.9.9 (190) if (Packet-Src-IP-Address == 130.59.31.24 || Packet-Src-IP-Address == 130.59.31.25) -> FALSE (190) if (EAP-Message) { (190) if (EAP-Message) -> TRUE (190) if (EAP-Message) { (190) policy filter_username { (190) if (&User-Name) { (190) if (&User-Name) -> TRUE (190) if (&User-Name) { (190) if (&User-Name =~ / /) { (190) if (&User-Name =~ / /) -> FALSE (190) if (&User-Name =~ /@[^@]*@/ ) { (190) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (190) if (&User-Name =~ /\.\./ ) { (190) if (&User-Name =~ /\.\./ ) -> FALSE (190) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (190) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (190) if (&User-Name =~ /\.$/) { (190) if (&User-Name =~ /\.$/) -> FALSE (190) if (&User-Name =~ /(a)\./) { (190) if (&User-Name =~ /(a)\./) -> FALSE (190) } # if (&User-Name) = updated (190) } # policy filter_username = updated (190) suffix: Checking for suffix after "@" (190) suffix: Looking up realm "unibe.ch" for User-Name = "xyz(a)unibe.ch" (190) suffix: Found realm "UNIBE.CH" (190) suffix: Adding Realm = "UNIBE.CH" (190) suffix: Authentication realm is LOCAL (190) [suffix] = ok (190) policy deny_no_realm { (190) if (User-Name && (User-Name !~ /@/)) { (190) if (User-Name && (User-Name !~ /@/)) -> FALSE (190) } # policy deny_no_realm = updated (190) update request { (190) EXPAND %{toupper:%{Realm}} (190) --> UNIBE.CH (190) Realm := UNIBE.CH (190) } # update request = noop (190) eap: Peer sent EAP Response (code 2) ID 9 length 60 (190) eap: Continuing tunnel setup (190) [eap] = ok (190) } # if (EAP-Message) = ok (190) } # authorize = updated (190) Found Auth-Type = eap (190) # Executing group from file /etc/freeradius/sites-enabled/default (190) Auth-Type eap { (190) eap: Removing EAP session with state 0xcf8ae573c883fce6 (190) eap: Previous EAP request found for state 0xcf8ae573c883fce6, released from the list (190) eap: Peer sent packet with method EAP PEAP (25) (190) eap: Calling submodule eap_peap to process data (190) eap_peap: (TLS) EAP Done initial handshake (190) eap_peap: Session established. Decoding tunneled attributes (190) eap_peap: PEAP state WAITING FOR INNER IDENTITY (190) eap_peap: Identity - xyz(a)unibe.ch (190) eap_peap: Got inner identity 'xyz(a)unibe.ch' (190) eap_peap: Setting default EAP type for tunneled EAP session (190) eap_peap: Got tunneled request (190) eap_peap: EAP-Message = 0x0209001d01646f6d696e69632e7374616c64657240756e6962652e6368 (190) eap_peap: Setting User-Name to xyz(a)unibe.ch (190) eap_peap: Sending tunneled request to proxy-inner-tunnel (190) eap_peap: EAP-Message = 0x0209001d01646f6d696e69632e7374616c64657240756e6962652e6368 (190) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (190) eap_peap: User-Name = "xyz(a)unibe.ch" (190) eap_peap: Service-Type = Framed-User (190) eap_peap: Cisco-AVPair = "service-type=Framed" (190) eap_peap: Cisco-AVPair = "audit-session-id=0F2A5C820000093C2FFBA7DF" (190) eap_peap: Cisco-AVPair = "method=dot1x" (190) eap_peap: Cisco-AVPair = "client-iif-id=3724547122" (190) eap_peap: Cisco-AVPair = "vlan-id=1876" (190) eap_peap: Cisco-AVPair = "cisco-wlan-ssid=eduroam" (190) eap_peap: Cisco-AVPair = "wlan-profile-name=eduroam-DEV" (190) eap_peap: Framed-MTU = 1485 (190) eap_peap: NAS-IP-Address = 9.9.9.9 (190) eap_peap: NAS-Port-Type = Wireless-802.11 (190) eap_peap: NAS-Port = 4211 (190) eap_peap: Called-Station-Id := "60-B9-C0-04-C4-40:eduroam" (190) eap_peap: Calling-Station-Id := "22-E0-73-F2-50-23" (190) eap_peap: Airespace-Wlan-Id = 98 (190) eap_peap: NAS-Identifier = "60-b9-c0-04-c4-40:eduroam" (190) eap_peap: WLAN-Group-Cipher = 1027076 (190) eap_peap: WLAN-Pairwise-Cipher = 1027076 (190) eap_peap: WLAN-AKM-Suite = 1027075 (190) Virtual server proxy-inner-tunnel received request (190) EAP-Message = 0x0209001d01646f6d696e69632e7374616c64657240756e6962652e6368 (190) FreeRADIUS-Proxied-To = 127.0.0.1 (190) User-Name = "xyz(a)unibe.ch" (190) Service-Type = Framed-User (190) Cisco-AVPair = "service-type=Framed" (190) Cisco-AVPair = "audit-session-id=0F2A5C820000093C2FFBA7DF" (190) Cisco-AVPair = "method=dot1x" (190) Cisco-AVPair = "client-iif-id=3724547122" (190) Cisco-AVPair = "vlan-id=1876" (190) Cisco-AVPair = "cisco-wlan-ssid=eduroam" (190) Cisco-AVPair = "wlan-profile-name=eduroam-DEV" (190) Framed-MTU = 1485 (190) NAS-IP-Address = 9.9.9.9 (190) NAS-Port-Type = Wireless-802.11 (190) NAS-Port = 4211 (190) Called-Station-Id := "60-B9-C0-04-C4-40:eduroam" (190) Calling-Station-Id := "22-E0-73-F2-50-23" (190) Airespace-Wlan-Id = 98 (190) NAS-Identifier = "60-b9-c0-04-c4-40:eduroam" (190) WLAN-Group-Cipher = 1027076 (190) WLAN-Pairwise-Cipher = 1027076 (190) WLAN-AKM-Suite = 1027075 (190) WARNING: Outer and inner identities are the same. User privacy is compromised. (190) server proxy-inner-tunnel { (190) # Executing section authorize from file /etc/freeradius/sites-enabled/proxy-inner-tunnel (190) authorize { (190) if (User-Name !~ /^([\w-.]{1,}\.[\w-.]{1,}@((unibe\.ch)|(faculty\.unibe\.ch)|(students\.unibe\.ch)|(ext\.unibe\.ch)))|(^[\w-]{1,20}@((campus\.unibe\.ch)|(unibe\.ch)))/) { (190) if (User-Name !~ /^([\w-.]{1,}\.[\w-.]{1,}@((unibe\.ch)|(faculty\.unibe\.ch)|(students\.unibe\.ch)|(ext\.unibe\.ch)))|(^[\w-]{1,20}@((campus\.unibe\.ch)|(unibe\.ch)))/) -> FALSE (190) if (!NAS-Port-Type){ (190) if (!NAS-Port-Type) -> FALSE (190) update control { (190) &Proxy-To-Realm := REALM-NPS-DEV (190) } # update control = noop (190) } # authorize = noop (190) } # server proxy-inner-tunnel (190) Virtual server sending reply (190) eap_peap: Got tunneled reply code 0 (190) eap_peap: Tunnelled authentication will be proxied to REALM-NPS-DEV (190) eap: WARNING: Tunneled session will be proxied. Not doing EAP (190) [eap] = handled (190) if (handled && (Response-Packet-Type == Access-Challenge)) { (190) EXPAND Response-Packet-Type (190) --> (190) if (handled && (Response-Packet-Type == Access-Challenge)) -> FALSE (190) } # Auth-Type eap = handled (190) Starting proxy to home server 130.92.14.27 port 1812 (190) server default { (190) # Executing section pre-proxy from file /etc/freeradius/sites-enabled/default (190) pre-proxy { (190) attr_filter.pre-proxy: EXPAND %{Realm} (190) attr_filter.pre-proxy: --> UNIBE.CH (190) attr_filter.pre-proxy: Matched entry DEFAULT at line 58 (190) [attr_filter.pre-proxy] = updated (190) } # pre-proxy = updated (190) } (190) Proxying request to home server 130.92.14.27 port 1812 timeout 20.000000 (190) Sent Access-Request Id 190 from 0.0.0.0:38376 to 130.92.14.27:1812 length 195 (190) Operator-Name := "1unibe.ch" (190) EAP-Message = 0x0209001d01646f6d696e69632e7374616c64657240756e6962652e6368 (190) User-Name = "xyz(a)unibe.ch" (190) NAS-IP-Address = 9.9.9.9 (190) NAS-Port-Type = Wireless-802.11 (190) Called-Station-Id := "60-B9-C0-04-C4-40:eduroam" (190) Calling-Station-Id := "22-E0-73-F2-50-23" (190) NAS-Identifier = "60-b9-c0-04-c4-40:eduroam" (190) Message-Authenticator = 0x (190) Proxy-State = 0x3935 Waking up in 0.3 seconds. (190) Clearing existing &reply: attributes (190) Received Access-Challenge Id 190 from 130.92.14.27:1812 to 130.92.10.33:38376 length 127 (190) Proxy-State = 0x3935 (190) Session-Timeout = 60 (190) EAP-Message = 0x010a00271a010a002210c83761488cca2718c679660556394dee4141492d4e50532d4544555632 (190) State = 0x22df03070000013700010200825c0e1b000000000000000000000000000000043a958c65 (190) Message-Authenticator = 0xa3812c370e044725e89c60fee08004f3 (190) server default { (190) # Executing section post-proxy from file /etc/freeradius/sites-enabled/default (190) post-proxy { (190) attr_filter.post-proxy: EXPAND %{Realm} (190) attr_filter.post-proxy: --> UNIBE.CH (190) attr_filter.post-proxy: Matched entry UNIBE.CH at line 102 (190) [attr_filter.post-proxy] = updated (190) eap: Doing post-proxy callback (190) eap: Passing reply from proxy back into the tunnel (190) eap: Got tunneled reply RADIUS code 11 (190) eap: Tunnel-Type := VLAN (190) eap: Tunnel-Medium-Type := IEEE-802 (190) eap: Proxy-State = 0x3935 (190) eap: EAP-Message = 0x010a00271a010a002210c83761488cca2718c679660556394dee4141492d4e50532d4544555632 (190) eap: State = 0x22df03070000013700010200825c0e1b000000000000000000000000000000043a958c65 (190) eap: Message-Authenticator = 0xa3812c370e044725e89c60fee08004f3 (190) eap: Got tunneled Access-Challenge (190) eap: Reply was handled (190) eap: Sending EAP Request (code 1) ID 10 length 70 (190) eap: EAP session adding &reply:State = 0xcf8ae573c780fce6 (190) [eap] = ok (190) } # post-proxy = updated (190) } (190) session-state: Saving cached attributes (190) Framed-MTU = 1014 (190) TLS-Session-Information = "(TLS) PEAP - recv TLS 1.3 Handshake, ClientHello" (190) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerHello" (190) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, Certificate" (190) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerKeyExchange" (190) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, ServerHelloDone" (190) TLS-Session-Information = "(TLS) PEAP - recv TLS 1.2 Handshake, ClientKeyExchange" (190) TLS-Session-Information = "(TLS) PEAP - recv TLS 1.2 Handshake, Finished" (190) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 ChangeCipherSpec" (190) TLS-Session-Information = "(TLS) PEAP - send TLS 1.2 Handshake, Finished" (190) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (190) TLS-Session-Version = "TLS 1.2" (190) Using Post-Auth-Type Challenge (190) Post-Auth-Type sub-section not found. Ignoring. (190) # Executing group from file /etc/freeradius/sites-enabled/default (190) Sent Access-Challenge Id 95 from 130.92.10.33:1812 to 9.9.9.9:60533 length 128 (190) EAP-Message = 0x010a00461900170303003b04f99461d03fc2c0ac23d67f4ddb067ebf0aab5a9c002f61bc4a0be3c85a32f413a556f4f955e47114a5bd3076e920126f217073cb89e19f73e9b7 (190) Message-Authenticator = 0x00000000000000000000000000000000 (190) State = 0xcf8ae573c780fce6e3b6e72de6bf5cbc (190) Finished request Waking up in 2.0 seconds. (191) Received Access-Request Id 103 from 9.9.9.9:60533 to 130.92.10.33:1812 length 549 (191) User-Name = "xyz(a)unibe.ch" (191) Service-Type = Framed-User (191) Cisco-AVPair = "service-type=Framed" (191) Framed-MTU = 1485 (191) EAP-Message = 0x020a007219001703030067205b847b10fba1584559915251d4673e0abf889721cd70283f669b7bc2790a707ee10b32db67326f5dc5ff040d06c69d2abac6cc1d42f3121fd59414b1064d38037caa197e338ac30a55ba2f77cc8e976d46335a5dfb2dd86e2f89a299d8ea1d97945192b49dbe (191) Message-Authenticator = 0xf3f378571c227125d81046d457c56823 (191) Cisco-AVPair = "audit-session-id=0F2A5C820000093C2FFBA7DF" (191) Cisco-AVPair = "method=dot1x" (191) Cisco-AVPair = "client-iif-id=3724547122" (191) Cisco-AVPair = "vlan-id=1876" (191) NAS-IP-Address = 9.9.9.9 (191) NAS-Port-Type = Wireless-802.11 (191) NAS-Port = 4211 (191) State = 0xcf8ae573c780fce6e3b6e72de6bf5cbc (191) Cisco-AVPair = "cisco-wlan-ssid=eduroam" (191) Cisco-AVPair = "wlan-profile-name=eduroam-DEV" (191) Called-Station-Id = "60-b9-c0-04-c4-40:eduroam" (191) Calling-Station-Id = "22-e0-73-f2-50-23" (191) Airespace-Wlan-Id = 98 (191) NAS-Identifier = "60-b9-c0-04-c4-40:eduroam" (191) WLAN-Group-Cipher = 1027076 (191) WLAN-Pairwise-Cipher = 1027076 (191) WLAN-AKM-Suite = 1027075 (191) session-state: No cached attributes (191) # Executing section authorize from file /etc/freeradius/sites-enabled/default (191) authorize { (191) policy rewrite_called_station_id { (191) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (191) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) -> TRUE (191) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (191) update request { (191) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (191) --> 60-B9-C0-04-C4-40 (191) &Called-Station-Id := 60-B9-C0-04-C4-40 (191) } # update request = noop (191) if ("%{8}") { (191) EXPAND %{8} (191) --> eduroam (191) if ("%{8}") -> TRUE (191) if ("%{8}") { (191) update request { (191) EXPAND %{8} (191) --> eduroam (191) &Called-Station-SSID := eduroam (191) EXPAND %{Called-Station-Id}:%{8} (191) --> 60-B9-C0-04-C4-40:eduroam (191) &Called-Station-Id := 60-B9-C0-04-C4-40:eduroam (191) } # update request = noop (191) } # if ("%{8}") = noop (191) [updated] = updated (191) } # if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) = updated (191) ... skipping else: Preceding "if" was taken (191) } # policy rewrite_called_station_id = updated (191) policy rewrite_calling_station_id { (191) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (191) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) -> TRUE (191) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (191) update request { (191) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (191) --> 22-E0-73-F2-50-23 (191) &Calling-Station-Id := 22-E0-73-F2-50-23 (191) EXPAND %{toupper:%{1}:%{2}:%{3}:%{4}:%{5}:%{6}} (191) --> 22:E0:73:F2:50:23 (191) &locMacAuth-Calling-Station-Id := 22:E0:73:F2:50:23 (191) } # update request = noop (191) [updated] = updated (191) } # if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) = updated (191) ... skipping else: Preceding "if" was taken (191) } # policy rewrite_calling_station_id = updated (191) if (NAS-Identifier == "uvisrz0215.insel.ch") { (191) if (NAS-Identifier == "uvisrz0215.insel.ch") -> FALSE (191) if (Service-Type == Call-Check) { (191) if (Service-Type == Call-Check) -> FALSE (191) if (Packet-Src-IP-Address == 130.59.31.24 || Packet-Src-IP-Address == 130.59.31.25) { (191) EXPAND Packet-Src-IP-Address (191) --> 9.9.9.9 (191) EXPAND Packet-Src-IP-Address (191) --> 9.9.9.9 (191) if (Packet-Src-IP-Address == 130.59.31.24 || Packet-Src-IP-Address == 130.59.31.25) -> FALSE (191) if (EAP-Message) { (191) if (EAP-Message) -> TRUE (191) if (EAP-Message) { (191) policy filter_username { (191) if (&User-Name) { (191) if (&User-Name) -> TRUE (191) if (&User-Name) { (191) if (&User-Name =~ / /) { (191) if (&User-Name =~ / /) -> FALSE (191) if (&User-Name =~ /@[^@]*@/ ) { (191) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (191) if (&User-Name =~ /\.\./ ) { (191) if (&User-Name =~ /\.\./ ) -> FALSE (191) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (191) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (191) if (&User-Name =~ /\.$/) { (191) if (&User-Name =~ /\.$/) -> FALSE (191) if (&User-Name =~ /(a)\./) { (191) if (&User-Name =~ /(a)\./) -> FALSE (191) } # if (&User-Name) = updated (191) } # policy filter_username = updated (191) suffix: Checking for suffix after "@" (191) suffix: Looking up realm "unibe.ch" for User-Name = "xyz(a)unibe.ch" (191) suffix: Found realm "UNIBE.CH" (191) suffix: Adding Realm = "UNIBE.CH" (191) suffix: Authentication realm is LOCAL (191) [suffix] = ok (191) policy deny_no_realm { (191) if (User-Name && (User-Name !~ /@/)) { (191) if (User-Name && (User-Name !~ /@/)) -> FALSE (191) } # policy deny_no_realm = updated (191) update request { (191) EXPAND %{toupper:%{Realm}} (191) --> UNIBE.CH (191) Realm := UNIBE.CH (191) } # update request = noop (191) eap: Peer sent EAP Response (code 2) ID 10 length 114 (191) eap: Continuing tunnel setup (191) [eap] = ok (191) } # if (EAP-Message) = ok (191) } # authorize = updated (191) Found Auth-Type = eap (191) # Executing group from file /etc/freeradius/sites-enabled/default (191) Auth-Type eap { (191) eap: Removing EAP session with state 0xcf8ae573c780fce6 (191) eap: Previous EAP request found for state 0xcf8ae573c780fce6, released from the list (191) eap: Peer sent packet with method EAP PEAP (25) (191) eap: Calling submodule eap_peap to process data (191) eap_peap: (TLS) EAP Done initial handshake (191) eap_peap: Session established. Decoding tunneled attributes (191) eap_peap: PEAP state phase2 (191) eap_peap: EAP method MSCHAPv2 (26) (191) eap_peap: Got tunneled request (191) eap_peap: EAP-Message = 0x020a00531a020a004e3197d74d4a32fbacd2fa345e05a04b070700000000000000008c45061c2def02f04f327c8c1994b030c364f8a9115efe2a00646f6d696e69632e7374616c64657240756e6962652e6368 (191) eap_peap: Setting User-Name to xyz(a)unibe.ch (191) eap_peap: Sending tunneled request to proxy-inner-tunnel (191) eap_peap: EAP-Message = 0x020a00531a020a004e3197d74d4a32fbacd2fa345e05a04b070700000000000000008c45061c2def02f04f327c8c1994b030c364f8a9115efe2a00646f6d696e69632e7374616c64657240756e6962652e6368 (191) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (191) eap_peap: User-Name = "xyz(a)unibe.ch" (191) eap_peap: State = 0x22df03070000013700010200825c0e1b000000000000000000000000000000043a958c65 (191) eap_peap: Service-Type = Framed-User (191) eap_peap: Cisco-AVPair = "service-type=Framed" (191) eap_peap: Cisco-AVPair = "audit-session-id=0F2A5C820000093C2FFBA7DF" (191) eap_peap: Cisco-AVPair = "method=dot1x" (191) eap_peap: Cisco-AVPair = "client-iif-id=3724547122" (191) eap_peap: Cisco-AVPair = "vlan-id=1876" (191) eap_peap: Cisco-AVPair = "cisco-wlan-ssid=eduroam" (191) eap_peap: Cisco-AVPair = "wlan-profile-name=eduroam-DEV" (191) eap_peap: Framed-MTU = 1485 (191) eap_peap: NAS-IP-Address = 9.9.9.9 (191) eap_peap: NAS-Port-Type = Wireless-802.11 (191) eap_peap: NAS-Port = 4211 (191) eap_peap: Called-Station-Id := "60-B9-C0-04-C4-40:eduroam" (191) eap_peap: Calling-Station-Id := "22-E0-73-F2-50-23" (191) eap_peap: Airespace-Wlan-Id = 98 (191) eap_peap: NAS-Identifier = "60-b9-c0-04-c4-40:eduroam" (191) eap_peap: WLAN-Group-Cipher = 1027076 (191) eap_peap: WLAN-Pairwise-Cipher = 1027076 (191) eap_peap: WLAN-AKM-Suite = 1027075 (191) Virtual server proxy-inner-tunnel received request (191) EAP-Message = 0x020a00531a020a004e3197d74d4a32fbacd2fa345e05a04b070700000000000000008c45061c2def02f04f327c8c1994b030c364f8a9115efe2a00646f6d696e69632e7374616c64657240756e6962652e6368 (191) FreeRADIUS-Proxied-To = 127.0.0.1 (191) User-Name = "xyz(a)unibe.ch" (191) State = 0x22df03070000013700010200825c0e1b000000000000000000000000000000043a958c65 (191) Service-Type = Framed-User (191) Cisco-AVPair = "service-type=Framed" (191) Cisco-AVPair = "audit-session-id=0F2A5C820000093C2FFBA7DF" (191) Cisco-AVPair = "method=dot1x" (191) Cisco-AVPair = "client-iif-id=3724547122" (191) Cisco-AVPair = "vlan-id=1876" (191) Cisco-AVPair = "cisco-wlan-ssid=eduroam" (191) Cisco-AVPair = "wlan-profile-name=eduroam-DEV" (191) Framed-MTU = 1485 (191) NAS-IP-Address = 9.9.9.9 (191) NAS-Port-Type = Wireless-802.11 (191) NAS-Port = 4211 (191) Called-Station-Id := "60-B9-C0-04-C4-40:eduroam" (191) Calling-Station-Id := "22-E0-73-F2-50-23" (191) Airespace-Wlan-Id = 98 (191) NAS-Identifier = "60-b9-c0-04-c4-40:eduroam" (191) WLAN-Group-Cipher = 1027076 (191) WLAN-Pairwise-Cipher = 1027076 (191) WLAN-AKM-Suite = 1027075 (191) WARNING: Outer and inner identities are the same. User privacy is compromised. (191) server proxy-inner-tunnel { (191) session-state: No cached attributes (191) # Executing section authorize from file /etc/freeradius/sites-enabled/proxy-inner-tunnel (191) authorize { (191) if (User-Name !~ /^([\w-.]{1,}\.[\w-.]{1,}@((unibe\.ch)|(faculty\.unibe\.ch)|(students\.unibe\.ch)|(ext\.unibe\.ch)))|(^[\w-]{1,20}@((campus\.unibe\.ch)|(unibe\.ch)))/) { (191) if (User-Name !~ /^([\w-.]{1,}\.[\w-.]{1,}@((unibe\.ch)|(faculty\.unibe\.ch)|(students\.unibe\.ch)|(ext\.unibe\.ch)))|(^[\w-]{1,20}@((campus\.unibe\.ch)|(unibe\.ch)))/) -> FALSE (191) if (!NAS-Port-Type){ (191) if (!NAS-Port-Type) -> FALSE (191) update control { (191) &Proxy-To-Realm := REALM-NPS-DEV (191) } # update control = noop (191) } # authorize = noop (191) } # server proxy-inner-tunnel (191) Virtual server sending reply (191) eap_peap: Got tunneled reply code 0 (191) eap_peap: Tunnelled authentication will be proxied to REALM-NPS-DEV (191) eap: WARNING: Tunneled session will be proxied. Not doing EAP (191) [eap] = handled (191) if (handled && (Response-Packet-Type == Access-Challenge)) { (191) EXPAND Response-Packet-Type (191) --> (191) if (handled && (Response-Packet-Type == Access-Challenge)) -> FALSE (191) } # Auth-Type eap = handled (191) Starting proxy to home server 130.92.14.27 port 1812 (191) server default { (191) # Executing section pre-proxy from file /etc/freeradius/sites-enabled/default (191) pre-proxy { (191) attr_filter.pre-proxy: EXPAND %{Realm} (191) attr_filter.pre-proxy: --> UNIBE.CH (191) attr_filter.pre-proxy: Matched entry DEFAULT at line 58 (191) [attr_filter.pre-proxy] = updated (191) } # pre-proxy = updated (191) } (191) Proxying request to home server 130.92.14.27 port 1812 timeout 20.000000 (191) Sent Access-Request Id 191 from 0.0.0.0:38376 to 130.92.14.27:1812 length 288 (191) Operator-Name := "1unibe.ch" (191) EAP-Message = 0x020a00531a020a004e3197d74d4a32fbacd2fa345e05a04b070700000000000000008c45061c2def02f04f327c8c1994b030c364f8a9115efe2a00646f6d696e69632e7374616c64657240756e6962652e6368 (191) User-Name = "xyz(a)unibe.ch" (191) State = 0x22df03070000013700010200825c0e1b000000000000000000000000000000043a958c65 (191) NAS-IP-Address = 9.9.9.9 (191) NAS-Port-Type = Wireless-802.11 (191) Called-Station-Id := "60-B9-C0-04-C4-40:eduroam" (191) Calling-Station-Id := "22-E0-73-F2-50-23" (191) NAS-Identifier = "60-b9-c0-04-c4-40:eduroam" (191) Message-Authenticator = 0x (191) Proxy-State = 0x313033 Waking up in 0.3 seconds. (191) Clearing existing &reply: attributes (191) Received Access-Challenge Id 191 from 130.92.14.27:1812 to 130.92.10.33:38376 length 140 (191) Proxy-State = 0x313033 (191) Session-Timeout = 60 (191) EAP-Message = 0x010b00331a030a002e533d36323537434330314631324434464143463944453131333631363541363935354444423345344438 (191) State = 0x22df03070000013700010200825c0e1b000000000000000000000000000000043a958c65 (191) Message-Authenticator = 0x8ca6aae399c7f203dc1a20ce85e5750b (191) server default { (191) # Executing section post-proxy from file /etc/freeradius/sites-enabled/default (191) post-proxy { (191) attr_filter.post-proxy: EXPAND %{Realm} (191) attr_filter.post-proxy: --> UNIBE.CH (191) attr_filter.post-proxy: Matched entry UNIBE.CH at line 102 (191) [attr_filter.post-proxy] = updated (191) eap: Doing post-proxy callback (191) eap: Passing reply from proxy back into the tunnel (191) eap: Got tunneled reply RADIUS code 11 (191) eap: Tunnel-Type := VLAN (191) eap: Tunnel-Medium-Type := IEEE-802 (191) eap: Proxy-State = 0x313033 (191) eap: EAP-Message = 0x010b00331a030a002e533d36323537434330314631324434464143463944453131333631363541363935354444423345344438 (191) eap: State = 0x22df03070000013700010200825c0e1b000000000000000000000000000000043a958c65 (191) eap: Message-Authenticator = 0x8ca6aae399c7f203dc1a20ce85e5750b (191) eap: Got tunneled Access-Challenge (191) eap: Reply was handled (191) eap: Sending EAP Request (code 1) ID 11 length 82 (191) eap: EAP session adding &reply:State = 0xcf8ae573c681fce6 (191) [eap] = ok (191) } # post-proxy = updated (191) } (191) Using Post-Auth-Type Challenge (191) Post-Auth-Type sub-section not found. Ignoring. (191) # Executing group from file /etc/freeradius/sites-enabled/default (191) Sent Access-Challenge Id 103 from 130.92.10.33:1812 to 9.9.9.9:60533 length 140 (191) EAP-Message = 0x010b00521900170303004704f99461d03fc2c1394041037baef530edfd9b8bf3fa86b0e63dd7b2ccbec2333eb2a290f24dcaa4882575e6ace41e0ab2b5a7b86b753145bb360713633e4a7d4d11d21c93b2d4 (191) Message-Authenticator = 0x00000000000000000000000000000000 (191) State = 0xcf8ae573c681fce6e3b6e72de6bf5cbc (191) Finished request Waking up in 1.9 seconds. (192) Received Access-Request Id 111 from 9.9.9.9:60533 to 130.92.10.33:1812 length 472 (192) User-Name = "xyz(a)unibe.ch" (192) Service-Type = Framed-User (192) Cisco-AVPair = "service-type=Framed" (192) Framed-MTU = 1485 (192) EAP-Message = 0x020b00251900170303001a205b847b10fba159867591b547327317b26e0f7da7607738977b (192) Message-Authenticator = 0x80bb23fad6417fe1677e1055aac4907e (192) Cisco-AVPair = "audit-session-id=0F2A5C820000093C2FFBA7DF" (192) Cisco-AVPair = "method=dot1x" (192) Cisco-AVPair = "client-iif-id=3724547122" (192) Cisco-AVPair = "vlan-id=1876" (192) NAS-IP-Address = 9.9.9.9 (192) NAS-Port-Type = Wireless-802.11 (192) NAS-Port = 4211 (192) State = 0xcf8ae573c681fce6e3b6e72de6bf5cbc (192) Cisco-AVPair = "cisco-wlan-ssid=eduroam" (192) Cisco-AVPair = "wlan-profile-name=eduroam-DEV" (192) Called-Station-Id = "60-b9-c0-04-c4-40:eduroam" (192) Calling-Station-Id = "22-e0-73-f2-50-23" (192) Airespace-Wlan-Id = 98 (192) NAS-Identifier = "60-b9-c0-04-c4-40:eduroam" (192) WLAN-Group-Cipher = 1027076 (192) WLAN-Pairwise-Cipher = 1027076 (192) WLAN-AKM-Suite = 1027075 (192) session-state: No cached attributes (192) # Executing section authorize from file /etc/freeradius/sites-enabled/default (192) authorize { (192) policy rewrite_called_station_id { (192) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (192) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) -> TRUE (192) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (192) update request { (192) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (192) --> 60-B9-C0-04-C4-40 (192) &Called-Station-Id := 60-B9-C0-04-C4-40 (192) } # update request = noop (192) if ("%{8}") { (192) EXPAND %{8} (192) --> eduroam (192) if ("%{8}") -> TRUE (192) if ("%{8}") { (192) update request { (192) EXPAND %{8} (192) --> eduroam (192) &Called-Station-SSID := eduroam (192) EXPAND %{Called-Station-Id}:%{8} (192) --> 60-B9-C0-04-C4-40:eduroam (192) &Called-Station-Id := 60-B9-C0-04-C4-40:eduroam (192) } # update request = noop (192) } # if ("%{8}") = noop (192) [updated] = updated (192) } # if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) = updated (192) ... skipping else: Preceding "if" was taken (192) } # policy rewrite_called_station_id = updated (192) policy rewrite_calling_station_id { (192) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (192) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) -> TRUE (192) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (192) update request { (192) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (192) --> 22-E0-73-F2-50-23 (192) &Calling-Station-Id := 22-E0-73-F2-50-23 (192) EXPAND %{toupper:%{1}:%{2}:%{3}:%{4}:%{5}:%{6}} (192) --> 22:E0:73:F2:50:23 (192) &locMacAuth-Calling-Station-Id := 22:E0:73:F2:50:23 (192) } # update request = noop (192) [updated] = updated (192) } # if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) = updated (192) ... skipping else: Preceding "if" was taken (192) } # policy rewrite_calling_station_id = updated (192) if (NAS-Identifier == "uvisrz0215.insel.ch") { (192) if (NAS-Identifier == "uvisrz0215.insel.ch") -> FALSE (192) if (Service-Type == Call-Check) { (192) if (Service-Type == Call-Check) -> FALSE (192) if (Packet-Src-IP-Address == 130.59.31.24 || Packet-Src-IP-Address == 130.59.31.25) { (192) EXPAND Packet-Src-IP-Address (192) --> 9.9.9.9 (192) EXPAND Packet-Src-IP-Address (192) --> 9.9.9.9 (192) if (Packet-Src-IP-Address == 130.59.31.24 || Packet-Src-IP-Address == 130.59.31.25) -> FALSE (192) if (EAP-Message) { (192) if (EAP-Message) -> TRUE (192) if (EAP-Message) { (192) policy filter_username { (192) if (&User-Name) { (192) if (&User-Name) -> TRUE (192) if (&User-Name) { (192) if (&User-Name =~ / /) { (192) if (&User-Name =~ / /) -> FALSE (192) if (&User-Name =~ /@[^@]*@/ ) { (192) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (192) if (&User-Name =~ /\.\./ ) { (192) if (&User-Name =~ /\.\./ ) -> FALSE (192) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (192) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (192) if (&User-Name =~ /\.$/) { (192) if (&User-Name =~ /\.$/) -> FALSE (192) if (&User-Name =~ /(a)\./) { (192) if (&User-Name =~ /(a)\./) -> FALSE (192) } # if (&User-Name) = updated (192) } # policy filter_username = updated (192) suffix: Checking for suffix after "@" (192) suffix: Looking up realm "unibe.ch" for User-Name = "xyz(a)unibe.ch" (192) suffix: Found realm "UNIBE.CH" (192) suffix: Adding Realm = "UNIBE.CH" (192) suffix: Authentication realm is LOCAL (192) [suffix] = ok (192) policy deny_no_realm { (192) if (User-Name && (User-Name !~ /@/)) { (192) if (User-Name && (User-Name !~ /@/)) -> FALSE (192) } # policy deny_no_realm = updated (192) update request { (192) EXPAND %{toupper:%{Realm}} (192) --> UNIBE.CH (192) Realm := UNIBE.CH (192) } # update request = noop (192) eap: Peer sent EAP Response (code 2) ID 11 length 37 (192) eap: Continuing tunnel setup (192) [eap] = ok (192) } # if (EAP-Message) = ok (192) } # authorize = updated (192) Found Auth-Type = eap (192) # Executing group from file /etc/freeradius/sites-enabled/default (192) Auth-Type eap { (192) eap: Removing EAP session with state 0xcf8ae573c681fce6 (192) eap: Previous EAP request found for state 0xcf8ae573c681fce6, released from the list (192) eap: Peer sent packet with method EAP PEAP (25) (192) eap: Calling submodule eap_peap to process data (192) eap_peap: (TLS) EAP Done initial handshake (192) eap_peap: Session established. Decoding tunneled attributes (192) eap_peap: PEAP state phase2 (192) eap_peap: EAP method MSCHAPv2 (26) (192) eap_peap: Got tunneled request (192) eap_peap: EAP-Message = 0x020b00061a03 (192) eap_peap: Setting User-Name to xyz(a)unibe.ch (192) eap_peap: Sending tunneled request to proxy-inner-tunnel (192) eap_peap: EAP-Message = 0x020b00061a03 (192) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (192) eap_peap: User-Name = "xyz(a)unibe.ch" (192) eap_peap: State = 0x22df03070000013700010200825c0e1b000000000000000000000000000000043a958c65 (192) eap_peap: Service-Type = Framed-User (192) eap_peap: Cisco-AVPair = "service-type=Framed" (192) eap_peap: Cisco-AVPair = "audit-session-id=0F2A5C820000093C2FFBA7DF" (192) eap_peap: Cisco-AVPair = "method=dot1x" (192) eap_peap: Cisco-AVPair = "client-iif-id=3724547122" (192) eap_peap: Cisco-AVPair = "vlan-id=1876" (192) eap_peap: Cisco-AVPair = "cisco-wlan-ssid=eduroam" (192) eap_peap: Cisco-AVPair = "wlan-profile-name=eduroam-DEV" (192) eap_peap: Framed-MTU = 1485 (192) eap_peap: NAS-IP-Address = 9.9.9.9 (192) eap_peap: NAS-Port-Type = Wireless-802.11 (192) eap_peap: NAS-Port = 4211 (192) eap_peap: Called-Station-Id := "60-B9-C0-04-C4-40:eduroam" (192) eap_peap: Calling-Station-Id := "22-E0-73-F2-50-23" (192) eap_peap: Airespace-Wlan-Id = 98 (192) eap_peap: NAS-Identifier = "60-b9-c0-04-c4-40:eduroam" (192) eap_peap: WLAN-Group-Cipher = 1027076 (192) eap_peap: WLAN-Pairwise-Cipher = 1027076 (192) eap_peap: WLAN-AKM-Suite = 1027075 (192) Virtual server proxy-inner-tunnel received request (192) EAP-Message = 0x020b00061a03 (192) FreeRADIUS-Proxied-To = 127.0.0.1 (192) User-Name = "xyz(a)unibe.ch" (192) State = 0x22df03070000013700010200825c0e1b000000000000000000000000000000043a958c65 (192) Service-Type = Framed-User (192) Cisco-AVPair = "service-type=Framed" (192) Cisco-AVPair = "audit-session-id=0F2A5C820000093C2FFBA7DF" (192) Cisco-AVPair = "method=dot1x" (192) Cisco-AVPair = "client-iif-id=3724547122" (192) Cisco-AVPair = "vlan-id=1876" (192) Cisco-AVPair = "cisco-wlan-ssid=eduroam" (192) Cisco-AVPair = "wlan-profile-name=eduroam-DEV" (192) Framed-MTU = 1485 (192) NAS-IP-Address = 9.9.9.9 (192) NAS-Port-Type = Wireless-802.11 (192) NAS-Port = 4211 (192) Called-Station-Id := "60-B9-C0-04-C4-40:eduroam" (192) Calling-Station-Id := "22-E0-73-F2-50-23" (192) Airespace-Wlan-Id = 98 (192) NAS-Identifier = "60-b9-c0-04-c4-40:eduroam" (192) WLAN-Group-Cipher = 1027076 (192) WLAN-Pairwise-Cipher = 1027076 (192) WLAN-AKM-Suite = 1027075 (192) WARNING: Outer and inner identities are the same. User privacy is compromised. (192) server proxy-inner-tunnel { (192) session-state: No cached attributes (192) # Executing section authorize from file /etc/freeradius/sites-enabled/proxy-inner-tunnel (192) authorize { (192) if (User-Name !~ /^([\w-.]{1,}\.[\w-.]{1,}@((unibe\.ch)|(faculty\.unibe\.ch)|(students\.unibe\.ch)|(ext\.unibe\.ch)))|(^[\w-]{1,20}@((campus\.unibe\.ch)|(unibe\.ch)))/) { (192) if (User-Name !~ /^([\w-.]{1,}\.[\w-.]{1,}@((unibe\.ch)|(faculty\.unibe\.ch)|(students\.unibe\.ch)|(ext\.unibe\.ch)))|(^[\w-]{1,20}@((campus\.unibe\.ch)|(unibe\.ch)))/) -> FALSE (192) if (!NAS-Port-Type){ (192) if (!NAS-Port-Type) -> FALSE (192) update control { (192) &Proxy-To-Realm := REALM-NPS-DEV (192) } # update control = noop (192) } # authorize = noop (192) } # server proxy-inner-tunnel (192) Virtual server sending reply (192) eap_peap: Got tunneled reply code 0 (192) eap_peap: Tunnelled authentication will be proxied to REALM-NPS-DEV (192) eap: WARNING: Tunneled session will be proxied. Not doing EAP (192) [eap] = handled (192) if (handled && (Response-Packet-Type == Access-Challenge)) { (192) EXPAND Response-Packet-Type (192) --> (192) if (handled && (Response-Packet-Type == Access-Challenge)) -> FALSE (192) } # Auth-Type eap = handled (192) Starting proxy to home server 130.92.14.27 port 1812 (192) server default { (192) # Executing section pre-proxy from file /etc/freeradius/sites-enabled/default (192) pre-proxy { (192) attr_filter.pre-proxy: EXPAND %{Realm} (192) attr_filter.pre-proxy: --> UNIBE.CH (192) attr_filter.pre-proxy: Matched entry DEFAULT at line 58 (192) [attr_filter.pre-proxy] = updated (192) } # pre-proxy = updated (192) } (192) Proxying request to home server 130.92.14.27 port 1812 timeout 20.000000 (192) Sent Access-Request Id 192 from 0.0.0.0:38376 to 130.92.14.27:1812 length 211 (192) Operator-Name := "1unibe.ch" (192) EAP-Message = 0x020b00061a03 (192) User-Name = "xyz(a)unibe.ch" (192) State = 0x22df03070000013700010200825c0e1b000000000000000000000000000000043a958c65 (192) NAS-IP-Address = 9.9.9.9 (192) NAS-Port-Type = Wireless-802.11 (192) Called-Station-Id := "60-B9-C0-04-C4-40:eduroam" (192) Calling-Station-Id := "22-E0-73-F2-50-23" (192) NAS-Identifier = "60-b9-c0-04-c4-40:eduroam" (192) Message-Authenticator = 0x (192) Proxy-State = 0x313131 Waking up in 0.3 seconds. (192) Clearing existing &reply: attributes (192) Received Access-Accept Id 192 from 130.92.14.27:1812 to 130.92.10.33:38376 length 289 (192) Proxy-State = 0x313131 (192) Class = 0x7374616666 (192) Filter-Id = "staff" (192) Framed-Protocol = PPP (192) Service-Type = Framed-User (192) Tunnel-Medium-Type:0 = IEEE-802 (192) Tunnel-Private-Group-Id:0 = "1874" (192) Tunnel-Type:0 = VLAN (192) EAP-Message = 0x030b0004 (192) Class = 0x577206960000013700010200825c0e1b00000000000000000000000001dac0032e975ae0000000000057c996 (192) MS-CHAP-Domain = "\001CAMPUS" (192) MS-MPPE-Send-Key = 0xfe66eab21e8b02b3e1c4b4f57f508f7a (192) MS-MPPE-Recv-Key = 0x1d45747249960c52c1ceeaf9378ad8aa (192) MS-CHAP2-Success = 0x01533d36323537434330314631324434464143463944453131333631363541363935354444423345344438 (192) Message-Authenticator = 0x332c0b8965d8c87621614cec5d9820b5 (192) server default { (192) # Executing section post-proxy from file /etc/freeradius/sites-enabled/default (192) post-proxy { (192) attr_filter.post-proxy: EXPAND %{Realm} (192) attr_filter.post-proxy: --> UNIBE.CH (192) attr_filter.post-proxy: Matched entry UNIBE.CH at line 102 (192) [attr_filter.post-proxy] = updated (192) eap: Doing post-proxy callback (192) eap: Passing reply from proxy back into the tunnel (192) eap: Got tunneled reply RADIUS code 2 (192) eap: Tunnel-Type := VLAN (192) eap: Tunnel-Medium-Type := IEEE-802 (192) eap: Proxy-State = 0x313131 (192) eap: Class = 0x7374616666 (192) eap: Filter-Id = "staff" (192) eap: Tunnel-Private-Group-Id:0 = "1874" (192) eap: EAP-Message = 0x030b0004 (192) eap: Class = 0x577206960000013700010200825c0e1b00000000000000000000000001dac0032e975ae0000000000057c996 (192) eap: MS-MPPE-Send-Key = 0xfe66eab21e8b02b3e1c4b4f57f508f7a (192) eap: MS-MPPE-Recv-Key = 0x1d45747249960c52c1ceeaf9378ad8aa (192) eap: Message-Authenticator = 0x332c0b8965d8c87621614cec5d9820b5 (192) eap: Tunneled authentication was successful (192) eap: SUCCESS (192) eap: Saving tunneled attributes for later (192) eap: Reply was handled (192) eap: Sending EAP Request (code 1) ID 12 length 46 (192) eap: EAP session adding &reply:State = 0xcf8ae573c586fce6 (192) [eap] = ok (192) } # post-proxy = updated (192) } (192) Using Post-Auth-Type Challenge (192) Post-Auth-Type sub-section not found. Ignoring. (192) # Executing group from file /etc/freeradius/sites-enabled/default (192) Sent Access-Challenge Id 111 from 130.92.10.33:1812 to 9.9.9.9:60533 length 104 (192) EAP-Message = 0x010c002e1900170303002304f99461d03fc2c2b4dd16ee98eb7b0ed3a137545de5ddc88bf5b3423c2b5f193225fc (192) Message-Authenticator = 0x00000000000000000000000000000000 (192) State = 0xcf8ae573c586fce6e3b6e72de6bf5cbc (192) Finished request Waking up in 1.9 seconds. (193) Received Access-Request Id 119 from 9.9.9.9:60533 to 130.92.10.33:1812 length 481 (193) User-Name = "xyz(a)unibe.ch" (193) Service-Type = Framed-User (193) Cisco-AVPair = "service-type=Framed" (193) Framed-MTU = 1485 (193) EAP-Message = 0x020c002e19001703030023205b847b10fba15afce16997166d4cb19322461fe577bbdaf9ad0ee9efac33751092a9 (193) Message-Authenticator = 0xb4660f308f2de4f2c559a9a233219dd9 (193) Cisco-AVPair = "audit-session-id=0F2A5C820000093C2FFBA7DF" (193) Cisco-AVPair = "method=dot1x" (193) Cisco-AVPair = "client-iif-id=3724547122" (193) Cisco-AVPair = "vlan-id=1876" (193) NAS-IP-Address = 9.9.9.9 (193) NAS-Port-Type = Wireless-802.11 (193) NAS-Port = 4211 (193) State = 0xcf8ae573c586fce6e3b6e72de6bf5cbc (193) Cisco-AVPair = "cisco-wlan-ssid=eduroam" (193) Cisco-AVPair = "wlan-profile-name=eduroam-DEV" (193) Called-Station-Id = "60-b9-c0-04-c4-40:eduroam" (193) Calling-Station-Id = "22-e0-73-f2-50-23" (193) Airespace-Wlan-Id = 98 (193) NAS-Identifier = "60-b9-c0-04-c4-40:eduroam" (193) WLAN-Group-Cipher = 1027076 (193) WLAN-Pairwise-Cipher = 1027076 (193) WLAN-AKM-Suite = 1027075 (193) session-state: No cached attributes (193) # Executing section authorize from file /etc/freeradius/sites-enabled/default (193) authorize { (193) policy rewrite_called_station_id { (193) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (193) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) -> TRUE (193) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (193) update request { (193) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (193) --> 60-B9-C0-04-C4-40 (193) &Called-Station-Id := 60-B9-C0-04-C4-40 (193) } # update request = noop (193) if ("%{8}") { (193) EXPAND %{8} (193) --> eduroam (193) if ("%{8}") -> TRUE (193) if ("%{8}") { (193) update request { (193) EXPAND %{8} (193) --> eduroam (193) &Called-Station-SSID := eduroam (193) EXPAND %{Called-Station-Id}:%{8} (193) --> 60-B9-C0-04-C4-40:eduroam (193) &Called-Station-Id := 60-B9-C0-04-C4-40:eduroam (193) } # update request = noop (193) } # if ("%{8}") = noop (193) [updated] = updated (193) } # if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) = updated (193) ... skipping else: Preceding "if" was taken (193) } # policy rewrite_called_station_id = updated (193) policy rewrite_calling_station_id { (193) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (193) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) -> TRUE (193) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (193) update request { (193) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (193) --> 22-E0-73-F2-50-23 (193) &Calling-Station-Id := 22-E0-73-F2-50-23 (193) EXPAND %{toupper:%{1}:%{2}:%{3}:%{4}:%{5}:%{6}} (193) --> 22:E0:73:F2:50:23 (193) &locMacAuth-Calling-Station-Id := 22:E0:73:F2:50:23 (193) } # update request = noop (193) [updated] = updated (193) } # if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) = updated (193) ... skipping else: Preceding "if" was taken (193) } # policy rewrite_calling_station_id = updated (193) if (NAS-Identifier == "uvisrz0215.insel.ch") { (193) if (NAS-Identifier == "uvisrz0215.insel.ch") -> FALSE (193) if (Service-Type == Call-Check) { (193) if (Service-Type == Call-Check) -> FALSE (193) if (Packet-Src-IP-Address == 130.59.31.24 || Packet-Src-IP-Address == 130.59.31.25) { (193) EXPAND Packet-Src-IP-Address (193) --> 9.9.9.9 (193) EXPAND Packet-Src-IP-Address (193) --> 9.9.9.9 (193) if (Packet-Src-IP-Address == 130.59.31.24 || Packet-Src-IP-Address == 130.59.31.25) -> FALSE (193) if (EAP-Message) { (193) if (EAP-Message) -> TRUE (193) if (EAP-Message) { (193) policy filter_username { (193) if (&User-Name) { (193) if (&User-Name) -> TRUE (193) if (&User-Name) { (193) if (&User-Name =~ / /) { (193) if (&User-Name =~ / /) -> FALSE (193) if (&User-Name =~ /@[^@]*@/ ) { (193) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (193) if (&User-Name =~ /\.\./ ) { (193) if (&User-Name =~ /\.\./ ) -> FALSE (193) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (193) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (193) if (&User-Name =~ /\.$/) { (193) if (&User-Name =~ /\.$/) -> FALSE (193) if (&User-Name =~ /(a)\./) { (193) if (&User-Name =~ /(a)\./) -> FALSE (193) } # if (&User-Name) = updated (193) } # policy filter_username = updated (193) suffix: Checking for suffix after "@" (193) suffix: Looking up realm "unibe.ch" for User-Name = "xyz(a)unibe.ch" (193) suffix: Found realm "UNIBE.CH" (193) suffix: Adding Realm = "UNIBE.CH" (193) suffix: Authentication realm is LOCAL (193) [suffix] = ok (193) policy deny_no_realm { (193) if (User-Name && (User-Name !~ /@/)) { (193) if (User-Name && (User-Name !~ /@/)) -> FALSE (193) } # policy deny_no_realm = updated (193) update request { (193) EXPAND %{toupper:%{Realm}} (193) --> UNIBE.CH (193) Realm := UNIBE.CH (193) } # update request = noop (193) eap: Peer sent EAP Response (code 2) ID 12 length 46 (193) eap: Continuing tunnel setup (193) [eap] = ok (193) } # if (EAP-Message) = ok (193) } # authorize = updated (193) Found Auth-Type = eap (193) # Executing group from file /etc/freeradius/sites-enabled/default (193) Auth-Type eap { (193) eap: Removing EAP session with state 0xcf8ae573c586fce6 (193) eap: Previous EAP request found for state 0xcf8ae573c586fce6, released from the list (193) eap: Peer sent packet with method EAP PEAP (25) (193) eap: Calling submodule eap_peap to process data (193) eap_peap: (TLS) EAP Done initial handshake (193) eap_peap: Session established. Decoding tunneled attributes (193) eap_peap: PEAP state send tlv success (193) eap_peap: Received EAP-TLV response (193) eap_peap: Success (193) eap_peap: Using saved attributes from the original Access-Accept (193) eap_peap: Tunnel-Type := VLAN (193) eap_peap: Tunnel-Medium-Type := IEEE-802 (193) eap_peap: Class = 0x7374616666 (193) eap_peap: Filter-Id = "staff" (193) eap_peap: Tunnel-Private-Group-Id:0 = "1874" (193) eap_peap: Class = 0x577206960000013700010200825c0e1b00000000000000000000000001dac0032e975ae0000000000057c996 (193) eap: Sending EAP Success (code 3) ID 12 length 4 (193) eap: Freeing handler (193) [eap] = ok (193) if (handled && (Response-Packet-Type == Access-Challenge)) { (193) if (handled && (Response-Packet-Type == Access-Challenge)) -> FALSE (193) } # Auth-Type eap = ok (193) # Executing section post-auth from file /etc/freeradius/sites-enabled/default (193) post-auth { (193) update { (193) No attributes updated for RHS &session-state: (193) } # update = noop (193) 802.1x_authz_log: EXPAND sp.%{%{reply:Packet-Type}:-format} (193) 802.1x_authz_log: --> sp.Access-Accept (193) 802.1x_authz_log: EXPAND %t : AuthZ: (%I) Access-Accept: [%{%{reply:User-Name}:-%{User-Name}}] TLS-Version=%{%{session-state:TLS-Session-Version}:-NULL} TLS-Ciphers=%{%{session-state:TLS-Session-Cipher-Suite}:-NULL} SSID=%{%{request:Called-Station-SSID}:-NULL} Calling-Station-Id=%{%{request:Calling-Station-Id}:-Unknown} Called-Station-Id=%{%{request:Called-Station-Id}:-Unknown} Filter-ID=%{%{reply:Filter-Id}:-NULL} VLAN=%{%{reply:Tunnel-Private-Group-Id}:-NULL} Class=%{%{reply:Class}:-NULL} (from client %{Client-Shortname} port %{%{request:Nas-Port}:-0} operator-name %{%{request:Operator-Name}:-Unknown}) (193) 802.1x_authz_log: --> Fri Nov 15 14:20:45 2024 : AuthZ: (119) Access-Accept: [xyz(a)unibe.ch] TLS-Version=NULL TLS-Ciphers=NULL SSID=eduroam Calling-Station-Id=22-E0-73-F2-50-23 Called-Station-Id=60-B9-C0-04-C4-40:eduroam Filter-ID=staff VLAN=1874 Class=0x7374616666 (from client cisco-wlc-9800-dev-mgmt.wifi.unibe.ch port 4211 operator-name Unknown) (193) 802.1x_authz_log: EXPAND /var/log/freeradius/authz.log (193) 802.1x_authz_log: --> /var/log/freeradius/authz.log (193) [802.1x_authz_log] = ok (193) policy remove_reply_message_if_eap { (193) if (&reply:EAP-Message && &reply:Reply-Message) { (193) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (193) else { (193) [noop] = noop (193) } # else = noop (193) } # policy remove_reply_message_if_eap = noop (193) } # post-auth = ok (193) Login OK: [xyz(a)unibe.ch] (from client cisco-wlc-9800-dev-mgmt.wifi.unibe.ch port 4211 cli 22-E0-73-F2-50-23) (193) Sent Access-Accept Id 119 from 130.92.10.33:1812 to 9.9.9.9:60533 length 264 (193) Tunnel-Type := VLAN (193) Tunnel-Medium-Type := IEEE-802 (193) Class = 0x7374616666 (193) Filter-Id = "staff" (193) Tunnel-Private-Group-Id:0 = "1874" (193) Class = 0x577206960000013700010200825c0e1b00000000000000000000000001dac0032e975ae0000000000057c996 (193) MS-MPPE-Recv-Key = 0xa0c1ae0b7eeb1e5c11689f0921a1cd1bda85111a84912ecbbb853107fe90372a (193) MS-MPPE-Send-Key = 0x4f4bdb175d9d487f81ddf1e819a82c37de9d37605d47a226923fc335d3e805a4 (193) EAP-Message = 0x030c0004 (193) Message-Authenticator = 0x00000000000000000000000000000000 (193) User-Name = "xyz(a)unibe.ch" (193) Finished request Waking up in 1.9 seconds. If you look at src/main/tls.c, it adds that attribute when the debug output shows "Connection established". And, it prints out the attribute it's added. (188) eap_peap: (TLS) PEAP - Connection Established (188) eap_peap: TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (188) eap_peap: TLS-Session-Version = "TLS 1.2" Why the f**k did I miss this in version 3.2.4? Or was it maybe "reintroduced" in 3.2.6 since I upgraded to this version lately; is is this another “SSL thing” patched by Nick? - More debugging for SSL ciphers. Patch from Nick Porter. Nonetheless, I am going to figure out how adjust my linelog module configuration to get it back into the logs, because at the moment I still see NULL (example): linelog 802.1x_authz_log { filename = ${logdir}/authz.log reference = "sp.%{%{reply:Packet-Type}:-format}" sp { Access-Accept = "%t : AuthZ: (%I) Access-Accept: [%{%{reply:User-Name}:-%{User-Name}}] TLS-Version=%{%{session-state:TLS-Session-Version}:-NULL} TLS-Ciphers=%{%{session-state:TLS-Session-Cipher-Suite}:-NULL} SSID=%{%{request:Called-Station-SSID}:-NULL} Calling-Station-Id=%{%{request:Calling-Station-Id}:-Unknown} Called-Station-Id=%{%{request:Called-Station-Id}:-Unknown} Filter-ID=%{%{reply:Filter-Id}:-NULL} VLAN=%{%{reply:Tunnel-Private-Group-Id}:-NULL} Class=%{%{reply:Class}:-NULL} (from client %{Client-Shortname} port %{%{request:Nas-Port}:-0} operator-name %{%{request:Operator-Name}:-Unknown})" } } Fri Nov 15 14:25:34 2024 : AuthZ: (11) Access-Accept: [anonymous(a)unibe.ch] TLS-Version=NULL TLS-Ciphers=NULL SSID=eduroam Calling-Station-Id=02-00-00-00-00-01 Called-Station-Id=11-22-33-44-55-66:eduroam Filter-ID=external VLAN=1876 Class=0x65787465726e616c (from client localhost port 0 operator-name Unknown)

4 7

FreeRADIUS 3.2.6 with openssl 3.2.2 in Rockylinux 9.5
by Burn Zero 13 Jan '25

13 Jan '25

Hi, Openssl is upgraded to 3.2.2 in Rocky linux 9.5 and hence I would request you to upgrade the rpm's with openssl 3.2.2. Thank you.

2 2

Simultaneous-Use, Session section not executing
by Erdal Emlik 12 Jan '25

12 Jan '25

i just can’t make it work. I just want to see executing section session in my debug with Access-Request iPhone’umdan gönderildi > Erdal Emlik <erdalemlik(a)icloud.com> şunları yazdı (12 Oca 2025 14:19): > Thank you Igor, > I will give it a try. > iPhone’umdan gönderildi > >> Igor Smitran <sigor(a)blic.net> şunları yazdı (12 Oca 2025 02:47): >> As far as i remember you need to enable checkrad.pl to have Simultaneous-Use working. >> SQL query will retrieve row with Accounting-Stop=NULL and get session id from it. >> checkrad.pl will check if that session id exists on NAS or this row was not updated (missing/missed acct stop packet from NAS). >> If session exists on NAS then freeradius will respond with reject message "Simultaneous use not allowed". >> Other members of group can correct me if i am wrong regarding this. >> Igor >>>> On 12.1.2025. 00:20, Erdal Emlik via Freeradius-Users wrote: >>> Hi, I’m trying to implement Simultaneous-Use with postgreSQL. I add Simultaneous-Use for every group at radgroupcheck. Uncommented simultaneous use checking queries at queries.conf. Uncommented sql in default and inner-tunnel at session section. Trying to simulate Simultaneous-Use from proxy. I know NAS sending accounting-request. I’m sending manual Access-Request and I sent Accounting-Response before that and I see at my radacct table I have accounting record with acctstoptime is null. So at the end of the day, I have access-request, I have accounting at the radacct table which it has acctstoptime is null. I expect to see when I send Access-Request RADIUS should return Access-Reject because user already have session with acctstoptime is null. Here is my radius debug and Im not seeing executing of session section in my debug. >>> FreeRADIUS Version 3.2.1 >>> Copyright (C) 1999-2022 The FreeRADIUS server project and contributors >>> There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A >>> PARTICULAR PURPOSE >>> You may redistribute copies of FreeRADIUS under the terms of the >>> GNU General Public License >>> For more information about these matters, see the file named COPYRIGHT >>> Starting - reading configuration files ... >>> ... > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

2 1

Simultaneous-Use, Session section not executing
by Erdal Emlik 12 Jan '25

12 Jan '25

Hi, I’m trying to implement Simultaneous-Use with postgreSQL. I add Simultaneous-Use for every group at radgroupcheck. Uncommented simultaneous use checking queries at queries.conf. Uncommented sql in default and inner-tunnel at session section. Trying to simulate Simultaneous-Use from proxy. I know NAS sending accounting-request. I’m sending manual Access-Request and I sent Accounting-Response before that and I see at my radacct table I have accounting record with acctstoptime is null. So at the end of the day, I have access-request, I have accounting at the radacct table which it has acctstoptime is null. I expect to see when I send Access-Request RADIUS should return Access-Reject because user already have session with acctstoptime is null. Here is my radius debug and Im not seeing executing of session section in my debug. FreeRADIUS Version 3.2.1 Copyright (C) 1999-2022 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/dictionary including configuration file /etc/freeradius/radiusd.conf including configuration file /etc/freeradius/proxy.conf including configuration file /etc/freeradius/clients.conf including files in directory /etc/freeradius/mods-enabled/ including configuration file /etc/freeradius/mods-enabled/preprocess including configuration file /etc/freeradius/mods-enabled/python3 including configuration file /etc/freeradius/mods-enabled/radutmp including configuration file /etc/freeradius/mods-enabled/realm including configuration file /etc/freeradius/mods-enabled/replicate including configuration file /etc/freeradius/mods-enabled/soh including configuration file /etc/freeradius/mods-enabled/sql including configuration file /etc/freeradius/mods-config/sql/main/postgresql/queries.conf including configuration file /etc/freeradius/mods-config/sql/main/postgresql/queries.conf including configuration file /etc/freeradius/mods-enabled/sqlcounter including configuration file /etc/freeradius/mods-config/sql/counter/postgresql/dailycounter.conf including configuration file /etc/freeradius/mods-config/sql/counter/postgresql/monthlycounter.conf including configuration file /etc/freeradius/mods-config/sql/counter/postgresql/noresetcounter.conf including configuration file /etc/freeradius/mods-config/sql/counter/postgresql/expire_on_login.conf including configuration file /etc/freeradius/mods-enabled/sqlippool including configuration file /etc/freeradius/mods-config/sql/ippool/postgresql/queries.conf including configuration file /etc/freeradius/mods-config/sql/ippool/postgresql/ippoolv6DelegatedQuery.conf including configuration file /etc/freeradius/mods-config/sql/ippool/postgresql/ippoolv6FramedQuery.conf including configuration file /etc/freeradius/mods-enabled/sradutmp including configuration file /etc/freeradius/mods-enabled/totp including configuration file /etc/freeradius/mods-enabled/unix including configuration file /etc/freeradius/mods-enabled/unpack including configuration file /etc/freeradius/mods-enabled/utf8 including configuration file /etc/freeradius/mods-enabled/detail.log including configuration file /etc/freeradius/mods-enabled/eap including configuration file /etc/freeradius/mods-enabled/always including configuration file /etc/freeradius/mods-enabled/attr_filter including configuration file /etc/freeradius/mods-enabled/cache including configuration file /etc/freeradius/mods-enabled/chap including configuration file /etc/freeradius/mods-enabled/date including configuration file /etc/freeradius/mods-enabled/detail including configuration file /etc/freeradius/mods-enabled/digest including configuration file /etc/freeradius/mods-enabled/dynamic_clients including configuration file /etc/freeradius/mods-enabled/echo including configuration file /etc/freeradius/mods-enabled/exec including configuration file /etc/freeradius/mods-enabled/expiration including configuration file /etc/freeradius/mods-enabled/expr including configuration file /etc/freeradius/mods-enabled/files including configuration file /etc/freeradius/mods-enabled/linelog including configuration file /etc/freeradius/mods-enabled/logintime including configuration file /etc/freeradius/mods-enabled/mschap including configuration file /etc/freeradius/mods-enabled/ntlm_auth including configuration file /etc/freeradius/mods-enabled/pap including configuration file /etc/freeradius/mods-enabled/passwd including files in directory /etc/freeradius/policy.d/ including configuration file /etc/freeradius/policy.d/abfab-tr including configuration file /etc/freeradius/policy.d/accounting including configuration file /etc/freeradius/policy.d/canonicalization including configuration file /etc/freeradius/policy.d/control including configuration file /etc/freeradius/policy.d/cui including configuration file /etc/freeradius/policy.d/debug including configuration file /etc/freeradius/policy.d/dhcp including configuration file /etc/freeradius/policy.d/eap including configuration file /etc/freeradius/policy.d/filter including configuration file /etc/freeradius/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/policy.d/operator-name including configuration file /etc/freeradius/policy.d/rfc7542 including configuration file /etc/freeradius/policy.d/reject_attributes including configuration file /etc/freeradius/policy.d/accounting.dpkg-old including configuration file /etc/freeradius/policy.d/eap.dpkg-old including configuration file /etc/freeradius/policy.d/bng_forwarding_attributes including files in directory /etc/freeradius/sites-enabled/ including configuration file /etc/freeradius/sites-enabled/status including configuration file /etc/freeradius/sites-enabled/monitor-socket including configuration file /etc/freeradius/sites-enabled/default including configuration file /etc/freeradius/sites-enabled/coa including configuration file /etc/freeradius/sites-enabled/inner-tunnel main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 postauth_client_lost = no pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = no log { stripped_names = no auth = yes auth_badpass = yes auth_goodpass = yes colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } recv_coa { } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } realm turk.net { } realm netoneadsl { } realm netonesdsl { } radiusd: #### Loading Clients #### client local { ipaddr = 10.2.105.0/0 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } lifetime = 3600 } client local { ipaddr = 10.2.134.249/32 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } lifetime = 3600 } Debugger not attached systemd watchdog is disabled # Creating Autz-Type = Status-Server # Creating Auth-Type = PAP # Creating Auth-Type = mschap # Creating Auth-Type = eap # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = yes with_alvarion_vsa_hack = no } # Loaded module rlm_python3 # Loading module "python3" from file /etc/freeradius/mods-enabled/python3 python3 { mod_instantiate = "example" func_instantiate = "instantiate" mod_authenticate = "example" func_authenticate = "authenticate" mod_accounting = "example" func_accounting = "accounting" mod_detach = "example" func_detach = "detach" python_path = "/etc/freeradius/mods-config/python3" cext_compat = yes pass_all_vps = no pass_all_vps_dict = no } # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/freeradius/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/mods-enabled/replicate # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_sql # Loading module "sqlrw" from file /etc/freeradius/mods-enabled/sql sql sqlrw { driver = "rlm_sql_postgresql" server = "10.2.134.251" port = 5432 login = "au_freeradius" password = <<< secret >>> radius_db = "radius" read_groups = yes read_profiles = yes read_clients = no delete_stale_sessions = yes sql_user_name = "%{User-Name}" default_user_profile = "" client_query = "SELECT A.id, A.nasname, CONCAT(shortname, '|', groupname, '|', servicepolicyenabled) as shortname, type, secret, server FROM nas A JOIN radhuntgroup B ON B.nasipaddress = A.nasname" authorize_check_query = "SELECT id, UserName, Attribute, Value, Op FROM radcheck WHERE Username = '%{SQL-User-Name}' ORDER BY id" authorize_reply_query = "SELECT id, UserName, Attribute, Value, Op FROM radreply WHERE Username = '%{SQL-User-Name}' and devicetype IN ( '%{&Bng-Model}','OTHER') and ((isservicepolicyenabled = 1 and '%{&Huntgroup-Name}' = 'CGNAT' and iscgnat = 1 and '%{&Customer-Static-IP}' != 1 ) or (iscgnat =0) or (isservicepolicyenabled=2)) and not ( '%{&User-Group-Name}' in ('Suspend','Freeze') and Attribute in ('Framed-IP-Address','Framed-Ipv6-Prefix','Framed-Route')) ORDER BY id" authorize_group_check_query = " SELECT id, GroupName, Attribute, case when ( Attribute= 'Pool-Name-DelegatedIPV6' or Attribute= 'Pool-Name-FramedIPV6' ) and '%{&Customer-Static-IP}' = 1 then REPLACE(Value,'Dinamic','Static') when ( Attribute= 'Pool-Name-DelegatedIPV6' or Attribute= 'Pool-Name-FramedIPV6' ) then Value when Attribute='Pool-Name' and '%{&Huntgroup-Name}' = 'CGNAT' then REPLACE(Value,'internet','cgnat') ELSE Value END as Value , op FROM radgroupcheck WHERE GroupName = '%{&User-Group-Name}' and ( '%{&Customer-Static-IPv6}' = 1 or ('%{&Customer-Static-IPv6}' = 0 and not ( Attribute= 'Pool-Name-DelegatedIPV6' or Attribute= 'Pool-Name-FramedIPV6'))) ORDER BY id" authorize_group_reply_query = "SELECT id, GroupName, Attribute, case when '%{&Customer-Static-IP}' = 1 and GroupName like 'Secure%%' THEN REPLACE(Value,'INTERNET_','STATIC_') when '%{&Customer-Static-IP}' = 1 and GroupName ='CGNAT' THEN REPLACE(Value,'CGNAT','INTERNET') when '%{&Customer-Static-IP}' = 1 and GroupName ='CGNATIPV6' THEN REPLACE(Value,'CGNAT','INTERNET') ELSE Value End as Value, op FROM radgroupreply WHERE GroupName = '%{&User-Group-Name}' and devicetype IN ( '%{&Bng-Model}','OTHER') ORDER BY id" group_membership_query = " SELECT '' as GroupName " simul_count_query = "SELECT COUNT(*) FROM radacct WHERE UserName='%{SQL-User-Name}' AND AcctStopTime IS NULL" simul_verify_query = "SELECT RadAcctId, AcctSessionId, UserName, NASIPAddress, NASPortId, FramedIPAddress, CallingStationId, FramedProtocol FROM radacct WHERE UserName='%{SQL-User-Name}' AND AcctStopTime IS NULL" safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" auto_escape = no accounting { reference = "%{tolower:type.%{%{Acct-Status-Type}:-none}.query}" type { accounting-on { query = "UPDATE radacct SET AcctStopTime = TO_TIMESTAMP(%{integer:Event-Timestamp}), AcctUpdateTime = TO_TIMESTAMP(%{integer:Event-Timestamp}), AcctSessionTime = (%{integer:Event-Timestamp} - EXTRACT(EPOCH FROM(AcctStartTime))), AcctTerminateCause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE AcctStopTime IS NULL AND NASIPAddress= '%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}}' AND AcctStartTime <= '%S'::timestamp" } accounting-off { query = "UPDATE radacct SET AcctStopTime = TO_TIMESTAMP(%{integer:Event-Timestamp}), AcctUpdateTime = TO_TIMESTAMP(%{integer:Event-Timestamp}), AcctSessionTime = (%{integer:Event-Timestamp} - EXTRACT(EPOCH FROM(AcctStartTime))), AcctTerminateCause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE AcctStopTime IS NULL AND NASIPAddress= '%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}}' AND AcctStartTime <= '%S'::timestamp" } start { query = "INSERT INTO radacct (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctUpdateTime, AcctStopTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, ConnectInfo_Stop, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol, FramedIpAddress, portbegin, portend, realipaddress, acctid, iscgnat, tunneltype, tunnelclientid, tunnelserver, tunnelclient, tunnelserverid, tunnellastid, actual_data_rate_upstream, actual_data_rate_downstream, minimum_data_rate_upstream, minimum_data_rate_downstream, maximum_data_rate_upstream, maximum_data_rate_downstream, attainable_data_rate_upstream, attainable_data_rate_downstream, framedipv6prefix, delegatedipv6prefix, modemmacaddress, acctinputoctetsipv6, acctoutputoctetsipv6 ) VALUES('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', NULLIF('%{Realm}', ''), '%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}}', NULLIF('%{%{NAS-Port-ID}:-%{NAS-Port}}', ''), '%{NAS-Port-Type}', TO_TIMESTAMP(%{integer:Event-Timestamp}), TO_TIMESTAMP(%{integer:Event-Timestamp}), NULL, 0, '%{Acct-Authentic}', '%{Connect-Info}', NULL, 0, 0, '%{Called-Station-Id}', '%{Calling-Station-Id}', NULL, '%{Service-Type}', '%{Framed-Protocol}', NULLIF('%{Framed-IP-Address}', '')::inet, %{Port-Begin}, %{Port-End}, NULLIF('%{Real-IpAddress}', ''), isnumeric(%{Account-Id}), %{Is-CgNat}, '%{Tunnel-Type}', '%{Tunnel-Server-Auth-Id}', '%{Tunnel-Server-Endpoint}', '%{Tunnel-Client-Endpoint}', '%{Tunnel-Assignment-Id}', '%{Tunnel-Client-Auth-Id}', isnumeric(%{actual-data-rate-upstream}), isnumeric(%{actual-data-rate-downstream}), isnumeric(%{minimum-data-rate-upstream}), isnumeric(%{minimum-data-rate-downstream}), isnumeric(%{maximum-data-rate-upstream}), isnumeric(%{maximum-data-rate-downstream}), isnumeric(%{attainable-data-rate-upstream}), isnumeric(%{attainable-data-rate-downstream}), NULLIF('%{Framed-IPv6-Prefix}','')::inet, NULLIF('%{Delegated-IPv6-Prefix}','')::inet, '%{client-mac-address}', 0, 0)" } interim-update { query = "UPDATE radacct SET FramedIPAddress = NULLIF('%{Framed-IP-Address}', '')::inet, AcctSessionTime = %{%{Acct-Session-Time}:-NULL}, AcctInterval = (%{integer:Event-Timestamp} - EXTRACT(EPOCH FROM (COALESCE(AcctUpdateTime, AcctStartTime)))), AcctUpdateTime = TO_TIMESTAMP(%{integer:Event-Timestamp}), AcctInputOctets = (('%{%{Acct-Input-Gigawords}:-0}'::bigint << 32) + '%{%{Acct-Input-Octets}:-0}'::bigint), AcctOutputOctets = (('%{%{Acct-Output-Gigawords}:-0}'::bigint << 32) + '%{%{Acct-Output-Octets}:-0}'::bigint), AcctInputOctetsIpV6 = (('%{%{Acct-Input-Gigawords-IPv6}:-0}'::bigint << 32) + '%{%{Acct-Input-Octets-IPv6}:-0}'::bigint), AcctOutputOctetsIpV6 = (('%{%{Acct-Output-Gigawords-IPv6}:-0}'::bigint << 32) + '%{%{Acct-Output-Octets-IPv6}:-0}'::bigint) WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}' AND AcctStopTime IS NULL" } stop { query = "UPDATE radacct SET AcctStopTime = TO_TIMESTAMP(%{integer:Event-Timestamp}), AcctUpdateTime = TO_TIMESTAMP(%{integer:Event-Timestamp}), AcctSessionTime = COALESCE(%{%{Acct-Session-Time}:-NULL}, (%{integer:Event-Timestamp} - EXTRACT(EPOCH FROM(AcctStartTime)))), AcctInputOctets = (('%{%{Acct-Input-Gigawords}:-0}'::bigint << 32) + '%{%{Acct-Input-Octets}:-0}'::bigint), AcctOutputOctets = (('%{%{Acct-Output-Gigawords}:-0}'::bigint << 32) + '%{%{Acct-Output-Octets}:-0}'::bigint), AcctTerminateCause = '%{Acct-Terminate-Cause}', FramedIPAddress = NULLIF('%{Framed-IP-Address}', '')::inet, ConnectInfo_stop = '%{Connect-Info}', AcctInputOctetsIpV6 = (('%{%{Acct-Input-Gigawords-IPv6}:-0}'::bigint << 32) + '%{%{Acct-Input-Octets-IPv6}:-0}'::bigint), AcctOutputOctetsIpV6 = (('%{%{Acct-Output-Gigawords-IPv6}:-0}'::bigint << 32) + '%{%{Acct-Output-Octets-IPv6}:-0}'::bigint) WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}' AND AcctStopTime IS NULL" } } } post-auth { reference = ".query" query = "INSERT INTO radpostauth (username, pass, reply, callingstationid, authdate) VALUES('%{User-Name}', '%{%{User-Password}:-Chap-Password}', '%{reply:Packet-Type}', '%{Calling-Station-Id}', NOW())" } } rlm_sql (sqlrw): Driver rlm_sql_postgresql (module rlm_sql_postgresql) loaded and linked Creating attribute sqlrw-SQL-Group # Loading module "sqlro" from file /etc/freeradius/mods-enabled/sql sql sqlro { driver = "rlm_sql_postgresql" server = "10.2.134.251" port = 5432 login = "au_freeradius" password = <<< secret >>> radius_db = "radius" read_groups = yes read_profiles = yes read_clients = yes delete_stale_sessions = yes sql_user_name = "%{User-Name}" default_user_profile = "" client_query = "SELECT A.id, A.nasname, CONCAT(shortname, '|', groupname, '|', servicepolicyenabled) as shortname, type, secret, server FROM nas A JOIN radhuntgroup B ON B.nasipaddress = A.nasname" authorize_check_query = "SELECT id, UserName, Attribute, Value, Op FROM radcheck WHERE Username = '%{SQL-User-Name}' ORDER BY id" authorize_reply_query = "SELECT id, UserName, Attribute, Value, Op FROM radreply WHERE Username = '%{SQL-User-Name}' and devicetype IN ( '%{&Bng-Model}','OTHER') and ((isservicepolicyenabled = 1 and '%{&Huntgroup-Name}' = 'CGNAT' and iscgnat = 1 and '%{&Customer-Static-IP}' != 1 ) or (iscgnat =0) or (isservicepolicyenabled=2)) and not ( '%{&User-Group-Name}' in ('Suspend','Freeze') and Attribute in ('Framed-IP-Address','Framed-Ipv6-Prefix','Framed-Route')) ORDER BY id" authorize_group_check_query = " SELECT id, GroupName, Attribute, case when ( Attribute= 'Pool-Name-DelegatedIPV6' or Attribute= 'Pool-Name-FramedIPV6' ) and '%{&Customer-Static-IP}' = 1 then REPLACE(Value,'Dinamic','Static') when ( Attribute= 'Pool-Name-DelegatedIPV6' or Attribute= 'Pool-Name-FramedIPV6' ) then Value when Attribute='Pool-Name' and '%{&Huntgroup-Name}' = 'CGNAT' then REPLACE(Value,'internet','cgnat') ELSE Value END as Value , op FROM radgroupcheck WHERE GroupName = '%{&User-Group-Name}' and ( '%{&Customer-Static-IPv6}' = 1 or ('%{&Customer-Static-IPv6}' = 0 and not ( Attribute= 'Pool-Name-DelegatedIPV6' or Attribute= 'Pool-Name-FramedIPV6'))) ORDER BY id" authorize_group_reply_query = "SELECT id, GroupName, Attribute, case when '%{&Customer-Static-IP}' = 1 and GroupName like 'Secure%%' THEN REPLACE(Value,'INTERNET_','STATIC_') when '%{&Customer-Static-IP}' = 1 and GroupName ='CGNAT' THEN REPLACE(Value,'CGNAT','INTERNET') when '%{&Customer-Static-IP}' = 1 and GroupName ='CGNATIPV6' THEN REPLACE(Value,'CGNAT','INTERNET') ELSE Value End as Value, op FROM radgroupreply WHERE GroupName = '%{&User-Group-Name}' and devicetype IN ( '%{&Bng-Model}','OTHER') ORDER BY id" group_membership_query = " SELECT '' as GroupName " simul_count_query = "SELECT COUNT(*) FROM radacct WHERE UserName='%{SQL-User-Name}' AND AcctStopTime IS NULL" simul_verify_query = "SELECT RadAcctId, AcctSessionId, UserName, NASIPAddress, NASPortId, FramedIPAddress, CallingStationId, FramedProtocol FROM radacct WHERE UserName='%{SQL-User-Name}' AND AcctStopTime IS NULL" safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" auto_escape = no accounting { reference = "%{tolower:type.%{%{Acct-Status-Type}:-none}.query}" type { accounting-on { query = "UPDATE radacct SET AcctStopTime = TO_TIMESTAMP(%{integer:Event-Timestamp}), AcctUpdateTime = TO_TIMESTAMP(%{integer:Event-Timestamp}), AcctSessionTime = (%{integer:Event-Timestamp} - EXTRACT(EPOCH FROM(AcctStartTime))), AcctTerminateCause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE AcctStopTime IS NULL AND NASIPAddress= '%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}}' AND AcctStartTime <= '%S'::timestamp" } accounting-off { query = "UPDATE radacct SET AcctStopTime = TO_TIMESTAMP(%{integer:Event-Timestamp}), AcctUpdateTime = TO_TIMESTAMP(%{integer:Event-Timestamp}), AcctSessionTime = (%{integer:Event-Timestamp} - EXTRACT(EPOCH FROM(AcctStartTime))), AcctTerminateCause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE AcctStopTime IS NULL AND NASIPAddress= '%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}}' AND AcctStartTime <= '%S'::timestamp" } start { query = "INSERT INTO radacct (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctUpdateTime, AcctStopTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, ConnectInfo_Stop, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol, FramedIpAddress, portbegin, portend, realipaddress, acctid, iscgnat, tunneltype, tunnelclientid, tunnelserver, tunnelclient, tunnelserverid, tunnellastid, actual_data_rate_upstream, actual_data_rate_downstream, minimum_data_rate_upstream, minimum_data_rate_downstream, maximum_data_rate_upstream, maximum_data_rate_downstream, attainable_data_rate_upstream, attainable_data_rate_downstream, framedipv6prefix, delegatedipv6prefix, modemmacaddress, acctinputoctetsipv6, acctoutputoctetsipv6 ) VALUES('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', NULLIF('%{Realm}', ''), '%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}}', NULLIF('%{%{NAS-Port-ID}:-%{NAS-Port}}', ''), '%{NAS-Port-Type}', TO_TIMESTAMP(%{integer:Event-Timestamp}), TO_TIMESTAMP(%{integer:Event-Timestamp}), NULL, 0, '%{Acct-Authentic}', '%{Connect-Info}', NULL, 0, 0, '%{Called-Station-Id}', '%{Calling-Station-Id}', NULL, '%{Service-Type}', '%{Framed-Protocol}', NULLIF('%{Framed-IP-Address}', '')::inet, %{Port-Begin}, %{Port-End}, NULLIF('%{Real-IpAddress}', ''), isnumeric(%{Account-Id}), %{Is-CgNat}, '%{Tunnel-Type}', '%{Tunnel-Server-Auth-Id}', '%{Tunnel-Server-Endpoint}', '%{Tunnel-Client-Endpoint}', '%{Tunnel-Assignment-Id}', '%{Tunnel-Client-Auth-Id}', isnumeric(%{actual-data-rate-upstream}), isnumeric(%{actual-data-rate-downstream}), isnumeric(%{minimum-data-rate-upstream}), isnumeric(%{minimum-data-rate-downstream}), isnumeric(%{maximum-data-rate-upstream}), isnumeric(%{maximum-data-rate-downstream}), isnumeric(%{attainable-data-rate-upstream}), isnumeric(%{attainable-data-rate-downstream}), NULLIF('%{Framed-IPv6-Prefix}','')::inet, NULLIF('%{Delegated-IPv6-Prefix}','')::inet, '%{client-mac-address}', 0, 0)" } interim-update { query = "UPDATE radacct SET FramedIPAddress = NULLIF('%{Framed-IP-Address}', '')::inet, AcctSessionTime = %{%{Acct-Session-Time}:-NULL}, AcctInterval = (%{integer:Event-Timestamp} - EXTRACT(EPOCH FROM (COALESCE(AcctUpdateTime, AcctStartTime)))), AcctUpdateTime = TO_TIMESTAMP(%{integer:Event-Timestamp}), AcctInputOctets = (('%{%{Acct-Input-Gigawords}:-0}'::bigint << 32) + '%{%{Acct-Input-Octets}:-0}'::bigint), AcctOutputOctets = (('%{%{Acct-Output-Gigawords}:-0}'::bigint << 32) + '%{%{Acct-Output-Octets}:-0}'::bigint), AcctInputOctetsIpV6 = (('%{%{Acct-Input-Gigawords-IPv6}:-0}'::bigint << 32) + '%{%{Acct-Input-Octets-IPv6}:-0}'::bigint), AcctOutputOctetsIpV6 = (('%{%{Acct-Output-Gigawords-IPv6}:-0}'::bigint << 32) + '%{%{Acct-Output-Octets-IPv6}:-0}'::bigint) WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}' AND AcctStopTime IS NULL" } stop { query = "UPDATE radacct SET AcctStopTime = TO_TIMESTAMP(%{integer:Event-Timestamp}), AcctUpdateTime = TO_TIMESTAMP(%{integer:Event-Timestamp}), AcctSessionTime = COALESCE(%{%{Acct-Session-Time}:-NULL}, (%{integer:Event-Timestamp} - EXTRACT(EPOCH FROM(AcctStartTime)))), AcctInputOctets = (('%{%{Acct-Input-Gigawords}:-0}'::bigint << 32) + '%{%{Acct-Input-Octets}:-0}'::bigint), AcctOutputOctets = (('%{%{Acct-Output-Gigawords}:-0}'::bigint << 32) + '%{%{Acct-Output-Octets}:-0}'::bigint), AcctTerminateCause = '%{Acct-Terminate-Cause}', FramedIPAddress = NULLIF('%{Framed-IP-Address}', '')::inet, ConnectInfo_stop = '%{Connect-Info}', AcctInputOctetsIpV6 = (('%{%{Acct-Input-Gigawords-IPv6}:-0}'::bigint << 32) + '%{%{Acct-Input-Octets-IPv6}:-0}'::bigint), AcctOutputOctetsIpV6 = (('%{%{Acct-Output-Gigawords-IPv6}:-0}'::bigint << 32) + '%{%{Acct-Output-Octets-IPv6}:-0}'::bigint) WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}' AND AcctStopTime IS NULL" } } } post-auth { reference = ".query" query = "INSERT INTO radpostauth (username, pass, reply, callingstationid, authdate) VALUES('%{User-Name}', '%{%{User-Password}:-Chap-Password}', '%{reply:Packet-Type}', '%{Calling-Station-Id}', NOW())" } } rlm_sql (sqlro): Driver rlm_sql_postgresql (module rlm_sql_postgresql) loaded and linked Creating attribute sqlro-SQL-Group # Loaded module rlm_sqlcounter # Loading module "dailycounter" from file /etc/freeradius/mods-enabled/sqlcounter sqlcounter dailycounter { sql_module_instance = "sql" key = "User-Name" query = "SELECT SUM(AcctSessionTime - GREATER((%%b - AcctStartTime::ABSTIME::INT4), 0)) FROM radacct WHERE UserName='%{User-Name}' AND AcctStartTime::ABSTIME::INT4 + AcctSessionTime > '%%b'" reset = "daily" reset_day = 1 counter_name = "Daily-Session-Time" check_name = "Max-Daily-Session" reply_name = "Session-Timeout" } # Loading module "monthlycounter" from file /etc/freeradius/mods-enabled/sqlcounter sqlcounter monthlycounter { sql_module_instance = "sql" key = "User-Name" query = "SELECT SUM(AcctSessionTime - GREATER((%%b - AcctStartTime::ABSTIME::INT4), 0)) FROM radacct WHERE UserName='%{User-Name}' AND AcctStartTime::ABSTIME::INT4 + AcctSessionTime > '%%b'" reset = "monthly" reset_day = 1 counter_name = "Monthly-Session-Time" check_name = "Max-Monthly-Session" reply_name = "Session-Timeout" } # Loading module "noresetcounter" from file /etc/freeradius/mods-enabled/sqlcounter sqlcounter noresetcounter { sql_module_instance = "sql" key = "User-Name" query = "SELECT SUM(AcctSessionTime) FROM radacct WHERE UserName='%{User-Name}'" reset = "never" reset_day = 1 counter_name = "Max-All-Session-Time" check_name = "Max-All-Session" reply_name = "Session-Timeout" } # Loading module "expire_on_login" from file /etc/freeradius/mods-enabled/sqlcounter sqlcounter expire_on_login { sql_module_instance = "sql" key = "User-Name" query = "SELECT EXTRACT(EPOCH FROM (NOW() - acctstarttime)) FROM radacct WHERE UserName='%{User-Name}' ORDER BY acctstarttime LIMIT 1;" reset = "never" reset_day = 1 counter_name = "Expire-After-Initial-Login" check_name = "Expire-After" reply_name = "Session-Timeout" } # Loaded module rlm_sqlippool # Loading module "ippoolv4" from file /etc/freeradius/mods-enabled/sqlippool sqlippool ippoolv4 { sql_module_instance = "sqlrw" lease_duration = 28800 pool_name = "Pool-Name" default_pool = "main_pool" attribute_name = "Framed-IP-Address" allocate_begin = "" allocate_clear = "" allocate_clear_timeout = 1 allocate_existing = "" allocate_requested = "" allocate_find = "SELECT fr_allocate_previous_or_new_framedipaddress( '%{control:Pool-Name}', '%{User-Name}', '%{NAS-IP-Address}', 28800 )" allocate_update = "" allocate_commit = "" pool_check = "SELECT id FROM radippool WHERE pool_name='%{control:Pool-Name}' LIMIT 1" start_begin = "" start_update = "UPDATE radippool SET expiry_time = 'now'::timestamp(0) + '28800 second'::interval, acctsessionid = '%{Acct-Unique-Session-Id}' WHERE framedipaddress = '%{Framed-IP-Address}'" start_commit = "" alive_begin = "" alive_update = "UPDATE radippool SET expiry_time = 'now'::timestamp(0) + '28800 seconds'::interval WHERE framedipaddress = case when '%{Framed-IP-Address}' = '' then '1.1.1.1'::inet else '%{Framed-IP-Address}'::inet end" alive_commit = "" stop_begin = "" stop_clear = "UPDATE radippool SET callingstationid = '', username = '', expiry_time = 'now'::timestamp(0) + '5 minute'::interval, acctsessionid = '' WHERE framedipaddress = case when '%{Framed-IP-Address}' = '' then '1.1.1.1'::inet else '%{Framed-IP-Address}'::inet end and acctsessionid = '%{Acct-Unique-Session-Id}'" stop_commit = "" on_begin = "" on_clear = "UPDATE radippool SET username = '' , callingstationid = '', expiry_time = 'now'::timestamp(0) - '1 second'::interval WHERE nasipaddress = '%{%{Nas-IP-Address}:-%{Nas-IPv6-Address}}'" on_commit = "" off_begin = "" off_clear = "UPDATE radippool SET username = '', callingstationid = '', expiry_time = 'now'::timestamp(0) - '1 second'::interval WHERE nasipaddress = '%{%{Nas-IP-Address}:-%{Nas-IPv6-Address}}'" off_commit = "" messages { exists = "Existing IP: %{reply:Framed-IP-Address} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})" success = "Allocated IP: %{reply:Framed-IP-Address} from %{control:Pool-Name} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})" clear = "Released IP Framed-IP-Address (did %{Called-Station-Id} cli %{Calling-Station-Id} user %{User-Name})" failed = "IP Allocation FAILED from %{control:Pool-Name} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})" nopool = "No Pool-Name defined (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})" } } # Loading module "ippoolv6Delegated" from file /etc/freeradius/mods-enabled/sqlippool sqlippool ippoolv6Delegated { sql_module_instance = "sqlrw" lease_duration = 14400 pool_name = "Pool-Name" default_pool = "main_pool" attribute_name = "Delegated-IPv6-Prefix" allocate_begin = "" allocate_clear = "" allocate_clear_timeout = 1 allocate_existing = "" allocate_requested = "" allocate_find = "SELECT fr_allocate_previous_or_new_framedipV6address( '%{control:Pool-Name-DelegatedIPV6}', '%{User-Name}', '%{NAS-IP-Address}', 14400 )" allocate_update = "" allocate_commit = "" pool_check = "SELECT id FROM radipv6pool WHERE pool_name='%{control:Pool-Name-DelegatedIPV6}' LIMIT 1" start_begin = "" start_update = "UPDATE radipv6pool SET expiry_time = 'now'::timestamp(0) + '14400 second'::interval WHERE framedipaddress = '%{Delegated-IPv6-Prefix}'" start_commit = "" alive_begin = "" alive_update = "UPDATE radipv6pool SET expiry_time = 'now'::timestamp(0) + '14400 seconds'::interval WHERE framedipaddress = '%{Delegated-IPv6-Prefix}' " alive_commit = "" stop_begin = "" stop_clear = "UPDATE radipv6pool SET username = '', expiry_time = 'now'::timestamp(0) + '1 minute'::interval WHERE username = '%{SQL-User-Name}'" stop_commit = "" on_begin = "" on_clear = "" on_commit = "" off_begin = "" off_clear = "" off_commit = "" messages { exists = "Existing IP: %{reply:Delegated-IPv6-Prefix} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})" success = "Allocated IP: %{reply:Delegated-IPv6-Prefix} from %{control:Pool-Name-DelegatedIPV6} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})" clear = "Released IP Delegated-IPv6-Prefix (did %{Called-Station-Id} cli %{Calling-Station-Id} user %{User-Name})" failed = "IP Allocation FAILED from %{control:Pool-Name-DelegatedIPV6} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})" nopool = "No Pool-Name-DelegatedIPV6 defined (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})" } } # Loading module "ippoolv6Framed" from file /etc/freeradius/mods-enabled/sqlippool sqlippool ippoolv6Framed { sql_module_instance = "sqlrw" lease_duration = 14400 pool_name = "Pool-Name" default_pool = "main_pool" attribute_name = "Framed-Ipv6-Prefix" allocate_begin = "" allocate_clear = "" allocate_clear_timeout = 1 allocate_existing = "" allocate_requested = "" allocate_find = "SELECT fr_allocate_previous_or_new_framedipV6address( '%{control:Pool-Name-FramedIPV6}', '%{User-Name}', '%{NAS-IP-Address}', 14400 )" allocate_update = "" allocate_commit = "" pool_check = "SELECT id FROM radipv6pool WHERE pool_name='%{control:Pool-Name-FramedIPV6}' LIMIT 1" start_begin = "" start_update = "UPDATE radipv6pool SET expiry_time = 'now'::timestamp(0) + '14400 second'::interval WHERE framedipaddress = '%{Framed-Ipv6-Prefix}'" start_commit = "" alive_begin = "" alive_update = "UPDATE radipv6pool SET expiry_time = 'now'::timestamp(0) + '14400 seconds'::interval WHERE framedipaddress = '%{Framed-Ipv6-Prefix}' " alive_commit = "" stop_begin = "" stop_clear = "UPDATE radipv6pool SET username = '', expiry_time = 'now'::timestamp(0) + '1 minute'::interval WHERE username = '%{SQL-User-Name}'" stop_commit = "" on_begin = "" on_clear = "UPDATE radipv6pool SET username = '' , expiry_time = 'now'::timestamp(0) - '1 second'::interval WHERE nasipaddress = '%{%{Nas-IP-Address}:-%{Nas-IPv6-Address}}'" on_commit = "" off_begin = "" off_clear = "UPDATE radipv6pool SET username = '', expiry_time = 'now'::timestamp(0) - '1 second'::interval WHERE nasipaddress = '%{%{Nas-IP-Address}:-%{Nas-IPv6-Address}}'" off_commit = "" messages { exists = "Existing IP: %{reply:Framed-Ipv6-Prefix} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})" success = "Allocated IP: %{reply:Framed-Ipv6-Prefix} from %{control:Pool-Name-FramedIPV6} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})" clear = "Released IP Framed-Ipv6-Prefix (did %{Called-Station-Id} cli %{Calling-Station-Id} user %{User-Name})" failed = "IP Allocation FAILED from %{control:Pool-Name-FramedIPV6} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})" nopool = "No Pool-Name-FramedIPV6 defined (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})" } } # Loading module "sradutmp" from file /etc/freeradius/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_totp # Loading module "totp" from file /etc/freeradius/mods-enabled/totp # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/mods-enabled/unpack # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/mods-enabled/utf8 # Loaded module rlm_detail # Loading module "auth_log" from file /etc/freeradius/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_cache # Loading module "cache" from file /etc/freeradius/mods-enabled/cache cache { driver = "rlm_cache_rbtree" key = "%{User-Name}" ttl = 10 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/mods-enabled/chap # Loaded module rlm_date # Loading module "date" from file /etc/freeradius/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" utc = no } # Loading module "detail" from file /etc/freeradius/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/mods-enabled/digest # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/mods-enabled/dynamic_clients # Loaded module rlm_exec # Loading module "echo" from file /etc/freeradius/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loading module "exec" from file /etc/freeradius/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/mods-enabled/expiration # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/mods-enabled/files files { filename = "/etc/freeradius/mods-config/files/authorize" acctusersfile = "/etc/freeradius/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/mods-config/files/pre-proxy" } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loading module "ntlm_auth" from file /etc/freeradius/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } instantiate { # Instantiating module "sqlro" from file /etc/freeradius/mods-enabled/sql postgresql { send_application_name = no } rlm_sql (sqlro): Attempting to connect to database "radius" rlm_sql (sqlro): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_sql_postgresql: Connecting using parameters: dbname='radius' host='10.2.134.251' port=5432 user='au_freeradius' password='Patates5' Connected to database 'radius' on '10.2.134.251' server version 120012, protocol version 3, backend PID 3465472 # Instantiating module "sqlrw" from file /etc/freeradius/mods-enabled/sql postgresql { send_application_name = no } rlm_sql (sqlrw): Attempting to connect to database "radius" rlm_sql (sqlrw): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_sql (sqlrw): Opening additional connection (0), 1 of 32 pending slots used rlm_sql_postgresql: Connecting using parameters: dbname='radius' host='10.2.134.251' port=5432 user='au_freeradius' password='Patates5' Connected to database 'radius' on '10.2.134.251' server version 120012, protocol version 3, backend PID 3465473 rlm_sql (sqlrw): Opening additional connection (1), 1 of 31 pending slots used rlm_sql_postgresql: Connecting using parameters: dbname='radius' host='10.2.134.251' port=5432 user='au_freeradius' password='Patates5' Connected to database 'radius' on '10.2.134.251' server version 120012, protocol version 3, backend PID 3465474 rlm_sql (sqlrw): Opening additional connection (2), 1 of 30 pending slots used rlm_sql_postgresql: Connecting using parameters: dbname='radius' host='10.2.134.251' port=5432 user='au_freeradius' password='Patates5' Connected to database 'radius' on '10.2.134.251' server version 120012, protocol version 3, backend PID 3465475 rlm_sql (sqlrw): Opening additional connection (3), 1 of 29 pending slots used rlm_sql_postgresql: Connecting using parameters: dbname='radius' host='10.2.134.251' port=5432 user='au_freeradius' password='Patates5' Connected to database 'radius' on '10.2.134.251' server version 120012, protocol version 3, backend PID 3465476 rlm_sql (sqlrw): Opening additional connection (4), 1 of 28 pending slots used rlm_sql_postgresql: Connecting using parameters: dbname='radius' host='10.2.134.251' port=5432 user='au_freeradius' password='Patates5' Connected to database 'radius' on '10.2.134.251' server version 120012, protocol version 3, backend PID 3465477 } # Instantiating module "preprocess" from file /etc/freeradius/mods-enabled/preprocess reading pairlist file /etc/freeradius/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/mods-config/preprocess/hints # Instantiating module "python3" from file /etc/freeradius/mods-enabled/python3 Python version: 3.8.10 (default, Nov 7 2024, 13:10:47) [GCC 9.4.0] # Instantiating module "IPASS" from file /etc/freeradius/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/mods-enabled/realm # Instantiating module "dailycounter" from file /etc/freeradius/mods-enabled/sqlcounter rlm_sqlcounter: Current Time: 1736607085 [2025-01-11 17:51:25], Prev reset 1736542800 [2025-01-11 00:00:00] # Instantiating module "monthlycounter" from file /etc/freeradius/mods-enabled/sqlcounter rlm_sqlcounter: Current Time: 1736607085 [2025-01-11 17:51:25], Prev reset 1735678800 [2025-01-01 00:00:00], Reset day [1] # Instantiating module "noresetcounter" from file /etc/freeradius/mods-enabled/sqlcounter rlm_sqlcounter: Current Time: 1736607085 [2025-01-11 17:51:25], Prev reset 0 [2025-01-11 17:00:00] # Instantiating module "expire_on_login" from file /etc/freeradius/mods-enabled/sqlcounter rlm_sqlcounter: Current Time: 1736607085 [2025-01-11 17:51:25], Prev reset 0 [2025-01-11 17:00:00] # Instantiating module "ippoolv4" from file /etc/freeradius/mods-enabled/sqlippool Ignoring "allocate_clear_timeout = 1", forcing to "allocate_clear_timeout = 1" # Instantiating module "ippoolv6Delegated" from file /etc/freeradius/mods-enabled/sqlippool Ignoring "allocate_clear_timeout = 1", forcing to "allocate_clear_timeout = 1" # Instantiating module "ippoolv6Framed" from file /etc/freeradius/mods-enabled/sqlippool Ignoring "allocate_clear_timeout = 1", forcing to "allocate_clear_timeout = 1" # Instantiating module "auth_log" from file /etc/freeradius/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log # Instantiating module "eap" from file /etc/freeradius/mods-enabled/eap # Linked to sub-module rlm_eap_md5 rlm_eap (EAP): Ignoring EAP method 'leap', because it is no longer supported # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/certs" pem_file_type = yes private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key" certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem" ca_file = "/etc/ssl/certs/ca-certificates.crt" private_key_password = <<< secret >>> dh_file = "/etc/freeradius/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no ca_path_reload_interval = 0 cipher_list = "DEFAULT" cipher_server_preference = no reject_unknown_intermediate_ca = no ecdh_curve = "prime256v1" disable_tlsv1 = yes disable_tlsv1_1 = yes tls_max_version = "1.2" tls_min_version = "1.2" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } tls: Please use 'tls_min_version' and 'tls_max_version' instead of 'disable_tlsv1' tls: Please use 'tls_min_version' and 'tls_max_version' instead of 'disable_tlsv1_1' tls: Setting DH parameters from /etc/freeradius/certs/dh - this is no longer necessary. tls: You should comment out the 'dh_file' configuration item. # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "reject" from file /etc/freeradius/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/mods-enabled/always # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/access_reject [/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay"found in filter list for realm "DEFAULT". [/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec"found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/accounting_response # Instantiating module "cache" from file /etc/freeradius/mods-enabled/cache rlm_cache (cache): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "detail" from file /etc/freeradius/mods-enabled/detail # Instantiating module "expiration" from file /etc/freeradius/mods-enabled/expiration # Instantiating module "files" from file /etc/freeradius/mods-enabled/files reading pairlist file /etc/freeradius/mods-config/files/authorize reading pairlist file /etc/freeradius/mods-config/files/accounting reading pairlist file /etc/freeradius/mods-config/files/pre-proxy # Instantiating module "linelog" from file /etc/freeradius/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/mods-enabled/linelog # Instantiating module "logintime" from file /etc/freeradius/mods-enabled/logintime # Instantiating module "mschap" from file /etc/freeradius/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "pap" from file /etc/freeradius/mods-enabled/pap # Instantiating module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/radiusd.conf } # server server status { # from file /etc/freeradius/sites-enabled/status # Loading authorize {...} Compiling Autz-Type Status-Server for attr Autz-Type } # server status server default { # from file /etc/freeradius/sites-enabled/default # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type # Loading authorize {...} Compiling Autz-Type Status-Server for attr Autz-Type # Loading preacct {...} # Loading accounting {...} # Loading session {...} # Loading post-auth {...} Compiling Post-Auth-Type REJECT for attr Post-Auth-Type Compiling Post-Auth-Type Challenge for attr Post-Auth-Type } # server default server coa { # from file /etc/freeradius/sites-enabled/coa # Loading recv-coa {...} # Loading send-coa {...} } # server coa server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type CHAP for attr Auth-Type Compiling Auth-Type MS-CHAP for attr Auth-Type # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading session {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/sites-enabled/inner-tunnel:331 Compiling Post-Auth-Type REJECT for attr Post-Auth-Type } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "control" listen { socket = "/var/run/freeradius/monitor/monitor.sock" uid = "freerad" gid = "freerad" mode = "rw" peercred = yes } } listen { type = "coa" virtual_server = "coa" ipaddr = * port = 3799 } listen { type = "status" ipaddr = 127.0.0.1 port = 18121 client admin { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } } listen { type = "auth" ipaddr = * port = 1812 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on command file /var/run/freeradius/monitor/monitor.sock Listening on coa address * port 3799 bound to server coa Listening on status address 127.0.0.1 port 18121 bound to server status Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Ready to process requests (0) Received Access-Request Id 123 from 10.2.134.249:51420 to 10.2.134.250:1812 length 136 (0) Framed-Protocol = PPP (0) User-Name = "2518932data(a)turk.net" (0) User-Password = "f89cedf00c" (0) Connect-Info = "4294967295/0" (0) NAS-Port-Type = Virtual (0) Service-Type = Framed-User (0) NAS-IP-Address = 193.192.126.219 (0) NAS-Identifier = "CISCO|CGNAT|0" (0) Message-Authenticator = 0x5617c937f3b28aba37ca5298db078ae5 (0) Proxy-State = 0x323134 (0) # Executing section authorize from file /etc/freeradius/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) update request { (0) Customer-Static-IP := 0 (0) Customer-Static-IPv6 := 0 (0) } # update request = noop (0) if ("%{NAS-Identifier}" =~ /^([^|]+)\|([^|]+)\|([^|]+)$/) { (0) EXPAND %{NAS-Identifier} (0) --> CISCO|CGNAT|0 (0) if ("%{NAS-Identifier}" =~ /^([^|]+)\|([^|]+)\|([^|]+)$/) -> TRUE (0) if ("%{NAS-Identifier}" =~ /^([^|]+)\|([^|]+)\|([^|]+)$/) { (0) update request { (0) EXPAND %{1} (0) --> CISCO (0) &Bng-Model := CISCO (0) EXPAND %{2} (0) --> CGNAT (0) &Huntgroup-Name := CGNAT (0) EXPAND %{3} (0) --> 0 (0) &Service-Policy-Enabled := 0 rlm_sql (sqlro): Reserved connection (1) rlm_sql (sqlro): Released connection (1) Need more connections to reach 10 spares rlm_sql (sqlro): Opening additional connection (6), 1 of 26 pending slots used rlm_sql_postgresql: Connecting using parameters: dbname='radius' host='10.2.134.251' port=5432 user='au_freeradius' password='Patates5' Connected to database 'radius' on '10.2.134.251' server version 120012, protocol version 3, backend PID 3465480 rlm_sql (sqlro): Reserved connection (2) rlm_sql (sqlro): Released connection (2) rlm_sql (sqlro): Reserved connection (3) rlm_sql (sqlro): Released connection (3) rlm_sql (sqlro): Reserved connection (4) rlm_sql (sqlro): Released connection (4) (0) EXPAND %{User-Name} (0) --> 2518932data(a)turk.net (0) SQL-User-Name set to '2518932data(a)turk.net' rlm_sql (sqlro): Reserved connection (0) (0) Executing select query: SELECT CASE WHEN GroupName = 'Internet' THEN 'CGNAT' WHEN GroupName ='ServicePolicy' and 'CGNAT'= 'CGNAT' THEN 'ServicePolicyCgnat' WHEN GroupName = 'InternetIPV6' THEN 'CGNAT'||'IPV6' ELSE GroupName END FROM radusergroup WHERE UserName='2518932data(a)turk.net' ORDER BY priority rlm_sql_postgresql: Status: PGRES_TUPLES_OK rlm_sql_postgresql: query affected rows = 1 , fields = 1 rlm_sql (sqlro): Released connection (0) (0) EXPAND %{sqlro:SELECT CASE WHEN GroupName = 'Internet' THEN '%{Huntgroup-Name}' WHEN GroupName ='ServicePolicy' and '%{Huntgroup-Name}'= 'CGNAT' THEN 'ServicePolicyCgnat' WHEN GroupName = 'InternetIPV6' THEN '%{Huntgroup-Name}'||'IPV6' ELSE GroupName END FROM radusergroup WHERE UserName='%{User-Name}' ORDER BY priority} (0) --> CGNAT (0) User-Group-Name := CGNAT (0) } # update request = noop (0) } # if ("%{NAS-Identifier}" =~ /^([^|]+)\|([^|]+)\|([^|]+)$/) = noop (0) if (&Huntgroup-Name == "CGNAT") { (0) if (&Huntgroup-Name == "CGNAT") -> TRUE (0) if (&Huntgroup-Name == "CGNAT") { (0) update request { rlm_sql (sqlro): Reserved connection (5) rlm_sql (sqlro): Released connection (5) (0) EXPAND %{User-Name} (0) --> 2518932data(a)turk.net (0) SQL-User-Name set to '2518932data(a)turk.net' rlm_sql (sqlro): Reserved connection (1) (0) Executing select query: SELECT COUNT(id) FROM radreply WHERE username='2518932data(a)turk.net' and attribute='Framed-IP-Address' limit 1 rlm_sql_postgresql: Status: PGRES_TUPLES_OK rlm_sql_postgresql: query affected rows = 1 , fields = 1 rlm_sql (sqlro): Released connection (1) (0) EXPAND %{sqlro:SELECT COUNT(id) FROM radreply WHERE username='%{User-Name}' and attribute='Framed-IP-Address' limit 1} (0) --> 0 (0) Customer-Static-IP := 0 (0) } # update request = noop (0) update request { rlm_sql (sqlro): Reserved connection (6) rlm_sql (sqlro): Released connection (6) (0) EXPAND %{User-Name} (0) --> 2518932data(a)turk.net (0) SQL-User-Name set to '2518932data(a)turk.net' rlm_sql (sqlro): Reserved connection (2) (0) Executing select query: SELECT case when ( isautomaticassignmentipv6 = true ) then 1 else 0 end FROM tcxdsl WHERE usernamewithrealm='2518932data(a)turk.net' limit 1 rlm_sql_postgresql: Status: PGRES_TUPLES_OK rlm_sql_postgresql: query affected rows = 1 , fields = 1 rlm_sql (sqlro): Released connection (2) (0) EXPAND %{sqlro:SELECT case when ( isautomaticassignmentipv6 = true ) then 1 else 0 end FROM tcxdsl WHERE usernamewithrealm='%{User-Name}' limit 1} (0) --> 0 (0) Customer-Static-IPv6 := 0 (0) } # update request = noop (0) } # if (&Huntgroup-Name == "CGNAT") = noop (0) suffix: Checking for suffix after "@" (0) suffix: Looking up realm "turk.net" for User-Name = "2518932data(a)turk.net" (0) suffix: Found realm "turk.net" (0) suffix: Adding Stripped-User-Name = "2518932data" (0) suffix: Adding Realm = "turk.net" (0) suffix: Authentication realm is LOCAL (0) [suffix] = ok (0) sqlrw: EXPAND %{User-Name} (0) sqlrw: --> 2518932data(a)turk.net (0) sqlrw: SQL-User-Name set to '2518932data(a)turk.net' rlm_sql (sqlrw): Reserved connection (0) (0) sqlrw: EXPAND SELECT id, UserName, Attribute, Value, Op FROM radcheck WHERE Username = '%{SQL-User-Name}' ORDER BY id (0) sqlrw: --> SELECT id, UserName, Attribute, Value, Op FROM radcheck WHERE Username = '2518932data(a)turk.net' ORDER BY id (0) sqlrw: Executing select query: SELECT id, UserName, Attribute, Value, Op FROM radcheck WHERE Username = '2518932data(a)turk.net' ORDER BY id rlm_sql_postgresql: Status: PGRES_TUPLES_OK rlm_sql_postgresql: query affected rows = 1 , fields = 5 (0) sqlrw: User found in radcheck table (0) sqlrw: Conditional check items matched, merging assignment check items (0) sqlrw: Cleartext-Password := "f89cedf00c" (0) sqlrw: EXPAND SELECT id, UserName, Attribute, Value, Op FROM radreply WHERE Username = '%{SQL-User-Name}' and devicetype IN ( '%{&Bng-Model}','OTHER') and ((isservicepolicyenabled = 1 and '%{&Huntgroup-Name}' = 'CGNAT' and iscgnat = 1 and '%{&Customer-Static-IP}' != 1 ) or (iscgnat =0) or (isservicepolicyenabled=2)) and not ( '%{&User-Group-Name}' in ('Suspend','Freeze') and Attribute in ('Framed-IP-Address','Framed-Ipv6-Prefix','Framed-Route')) ORDER BY id (0) sqlrw: --> SELECT id, UserName, Attribute, Value, Op FROM radreply WHERE Username = '2518932data(a)turk.net' and devicetype IN ( 'CISCO','OTHER') and ((isservicepolicyenabled = 1 and 'CGNAT' = 'CGNAT' and iscgnat = 1 and '0' != 1 ) or (iscgnat =0) or (isservicepolicyenabled=2)) and not ( 'CGNAT' in ('Suspend','Freeze') and Attribute in ('Framed-IP-Address','Framed-Ipv6-Prefix','Framed-Route')) ORDER BY id (0) sqlrw: Executing select query: SELECT id, UserName, Attribute, Value, Op FROM radreply WHERE Username = '2518932data(a)turk.net' and devicetype IN ( 'CISCO','OTHER') and ((isservicepolicyenabled = 1 and 'CGNAT' = 'CGNAT' and iscgnat = 1 and '0' != 1 ) or (iscgnat =0) or (isservicepolicyenabled=2)) and not ( 'CGNAT' in ('Suspend','Freeze') and Attribute in ('Framed-IP-Address','Framed-Ipv6-Prefix','Framed-Route')) ORDER BY id rlm_sql_postgresql: Status: PGRES_TUPLES_OK rlm_sql_postgresql: query affected rows = 3 , fields = 5 (0) sqlrw: User found in radreply table, merging reply items (0) sqlrw: Cisco-AVPair := "ip:ip-unnumbered=Loopback 10" (0) sqlrw: Cisco-AVPair := "ip:dns-servers=193.192.98.8 212.154.100.18" (0) sqlrw: Cisco-Account-Info := "AINTERNET" (0) sqlrw: EXPAND SELECT '' as GroupName (0) sqlrw: --> SELECT '' as GroupName (0) sqlrw: Executing select query: SELECT '' as GroupName rlm_sql_postgresql: Status: PGRES_TUPLES_OK rlm_sql_postgresql: query affected rows = 1 , fields = 1 (0) sqlrw: User found in the group table (0) sqlrw: EXPAND SELECT id, GroupName, Attribute, case when ( Attribute= 'Pool-Name-DelegatedIPV6' or Attribute= 'Pool-Name-FramedIPV6' ) and '%{&Customer-Static-IP}' = 1 then REPLACE(Value,'Dinamic','Static') when ( Attribute= 'Pool-Name-DelegatedIPV6' or Attribute= 'Pool-Name-FramedIPV6' ) then Value when Attribute='Pool-Name' and '%{&Huntgroup-Name}' = 'CGNAT' then REPLACE(Value,'internet','cgnat') ELSE Value END as Value , op FROM radgroupcheck WHERE GroupName = '%{&User-Group-Name}' and ( '%{&Customer-Static-IPv6}' = 1 or ('%{&Customer-Static-IPv6}' = 0 and not ( Attribute= 'Pool-Name-DelegatedIPV6' or Attribute= 'Pool-Name-FramedIPV6'))) ORDER BY id (0) sqlrw: --> SELECT id, GroupName, Attribute, case when ( Attribute= 'Pool-Name-DelegatedIPV6' or Attribute= 'Pool-Name-FramedIPV6' ) and '0' = 1 then REPLACE(Value,'Dinamic','Static') when ( Attribute= 'Pool-Name-DelegatedIPV6' or Attribute= 'Pool-Name-FramedIPV6' ) then Value when Attribute='Pool-Name' and 'CGNAT' = 'CGNAT' then REPLACE(Value,'internet','cgnat') ELSE Value END as Value , op FROM radgroupcheck WHERE GroupName = 'CGNAT' and ( '0' = 1 or ('0' = 0 and not ( Attribute= 'Pool-Name-DelegatedIPV6' or Attribute= 'Pool-Name-FramedIPV6'))) ORDER BY id (0) sqlrw: Executing select query: SELECT id, GroupName, Attribute, case when ( Attribute= 'Pool-Name-DelegatedIPV6' or Attribute= 'Pool-Name-FramedIPV6' ) and '0' = 1 then REPLACE(Value,'Dinamic','Static') when ( Attribute= 'Pool-Name-DelegatedIPV6' or Attribute= 'Pool-Name-FramedIPV6' ) then Value when Attribute='Pool-Name' and 'CGNAT' = 'CGNAT' then REPLACE(Value,'internet','cgnat') ELSE Value END as Value , op FROM radgroupcheck WHERE GroupName = 'CGNAT' and ( '0' = 1 or ('0' = 0 and not ( Attribute= 'Pool-Name-DelegatedIPV6' or Attribute= 'Pool-Name-FramedIPV6'))) ORDER BY id rlm_sql_postgresql: Status: PGRES_TUPLES_OK rlm_sql_postgresql: query affected rows = 2 , fields = 5 (0) sqlrw: Group "": Conditional check items matched (0) sqlrw: Group "": Merging assignment check items (0) sqlrw: Simultaneous-Use := 1 (0) sqlrw: Pool-Name := "cgnat_pool" (0) sqlrw: EXPAND SELECT id, GroupName, Attribute, case when '%{&Customer-Static-IP}' = 1 and GroupName like 'Secure%%' THEN REPLACE(Value,'INTERNET_','STATIC_') when '%{&Customer-Static-IP}' = 1 and GroupName ='CGNAT' THEN REPLACE(Value,'CGNAT','INTERNET') when '%{&Customer-Static-IP}' = 1 and GroupName ='CGNATIPV6' THEN REPLACE(Value,'CGNAT','INTERNET') ELSE Value End as Value, op FROM radgroupreply WHERE GroupName = '%{&User-Group-Name}' and devicetype IN ( '%{&Bng-Model}','OTHER') ORDER BY id (0) sqlrw: --> SELECT id, GroupName, Attribute, case when '0' = 1 and GroupName like 'Secure%' THEN REPLACE(Value,'INTERNET_','STATIC_') when '0' = 1 and GroupName ='CGNAT' THEN REPLACE(Value,'CGNAT','INTERNET') when '0' = 1 and GroupName ='CGNATIPV6' THEN REPLACE(Value,'CGNAT','INTERNET') ELSE Value End as Value, op FROM radgroupreply WHERE GroupName = 'CGNAT' and devicetype IN ( 'CISCO','OTHER') ORDER BY id (0) sqlrw: Executing select query: SELECT id, GroupName, Attribute, case when '0' = 1 and GroupName like 'Secure%' THEN REPLACE(Value,'INTERNET_','STATIC_') when '0' = 1 and GroupName ='CGNAT' THEN REPLACE(Value,'CGNAT','INTERNET') when '0' = 1 and GroupName ='CGNATIPV6' THEN REPLACE(Value,'CGNAT','INTERNET') ELSE Value End as Value, op FROM radgroupreply WHERE GroupName = 'CGNAT' and devicetype IN ( 'CISCO','OTHER') ORDER BY id rlm_sql_postgresql: Status: PGRES_TUPLES_OK rlm_sql_postgresql: query affected rows = 6 , fields = 5 (0) sqlrw: Group "": Merging reply items (0) sqlrw: Service-Type := Framed-User (0) sqlrw: Framed-Protocol := PPP (0) sqlrw: Cisco-AVPair := "ip:dns-servers=193.192.98.8 212.154.100.18" (0) sqlrw: Cisco-AVPair := "ip:vrf-id=CGNAT" (0) sqlrw: Cisco-AVPair := "ip:ip-unnumbered=Loopback 10" (0) sqlrw: Cisco-AVPair := "ipv6-dns-servers-addr=2A02:FF0:2:327:193:192:98:30" rlm_sql (sqlrw): Released connection (0) Need more connections to reach 10 spares rlm_sql (sqlrw): Opening additional connection (5), 1 of 27 pending slots used rlm_sql_postgresql: Connecting using parameters: dbname='radius' host='10.2.134.251' port=5432 user='au_freeradius' password='Patates5' Connected to database 'radius' on '10.2.134.251' server version 120012, protocol version 3, backend PID 3465481 (0) [sqlrw] = ok (0) if (notfound) { (0) if (notfound) -> FALSE (0) if (reject) { (0) if (reject) -> FALSE (0) update control { (0) Auth-Type := PAP (0) } # update control = noop (0) if (&User-Group-Name == "BngForwarding" ) { (0) if (&User-Group-Name == "BngForwarding" ) -> FALSE (0) [expiration] = noop (0) [logintime] = noop (0) pap: WARNING: Auth-Type already set. Not setting to PAP (0) [pap] = noop (0) } # authorize = ok (0) Found Auth-Type = PAP (0) # Executing group from file /etc/freeradius/sites-enabled/default (0) Auth-Type PAP { (0) pap: Login attempt with password (0) pap: Comparing with "known good" Cleartext-Password (0) pap: User authenticated successfully (0) [pap] = ok (0) if (noop) { (0) if (noop) -> FALSE (0) if (reject) { (0) if (reject) -> FALSE (0) if (fail) { (0) if (fail) -> FALSE (0) update request { rlm_sql (sqlro): Reserved connection (3) rlm_sql (sqlro): Released connection (3) (0) EXPAND %{User-Name} (0) --> 2518932data(a)turk.net (0) SQL-User-Name set to '2518932data(a)turk.net' rlm_sql (sqlro): Reserved connection (4) (0) Executing select query: SELECT VALUE FROM RADCHECK WHERE USERNAME = '2518932data(a)turk.net' AND ATTRIBUTE IN ('Calling-Station-Id', 'NAS-Port-Id') ORDER BY ATTRIBUTE DESC LIMIT 1 rlm_sql_postgresql: Status: PGRES_TUPLES_OK rlm_sql_postgresql: query affected rows = 0 , fields = 1 (0) SQL query returned no results rlm_sql (sqlro): Released connection (4) (0) EXPAND %{sqlro:SELECT VALUE FROM RADCHECK WHERE USERNAME = '%{User-Name}' AND ATTRIBUTE IN ('Calling-Station-Id', 'NAS-Port-Id') ORDER BY ATTRIBUTE DESC LIMIT 1} (0) --> (0) InventoryPortInfo := (0) } # update request = noop (0) [python3] = ok (0) if (reject){ (0) if (reject) -> FALSE (0) policy accept { (0) update control { (0) &Response-Packet-Type = Access-Accept (0) } # update control = noop (0) [handled] = handled (0) } # policy accept = handled (0) } # Auth-Type PAP = handled (0) # Executing section post-auth from file /etc/freeradius/sites-enabled/default (0) post-auth { (0) update { (0) No attributes updated for RHS &session-state: (0) } # update = noop (0) if (&Customer-Static-IP == 1 && (&User-Group-Name == "Closed" || &User-Group-Name == "Freeze")){ (0) if (&Customer-Static-IP == 1 && (&User-Group-Name == "Closed" || &User-Group-Name == "Freeze")) -> FALSE rlm_sql (sqlrw): Reserved connection (1) (0) ippoolv4: EXPAND %{User-Name} (0) ippoolv4: --> 2518932data(a)turk.net (0) ippoolv4: SQL-User-Name set to '2518932data(a)turk.net' (0) ippoolv4: EXPAND SELECT fr_allocate_previous_or_new_framedipaddress( '%{control:Pool-Name}', '%{User-Name}', '%{NAS-IP-Address}', 28800 ) (0) ippoolv4: --> SELECT fr_allocate_previous_or_new_framedipaddress( 'cgnat_pool', '2518932data(a)turk.net', '193.192.126.219', 28800 ) (0) ippoolv4: Executing select query: SELECT fr_allocate_previous_or_new_framedipaddress( 'cgnat_pool', '2518932data(a)turk.net', '193.192.126.219', 28800 ) rlm_sql_postgresql: Status: PGRES_TUPLES_OK rlm_sql_postgresql: query affected rows = 1 , fields = 1 (0) ippoolv4: Allocated IP 100.101.163.110 rlm_sql (sqlrw): Released connection (1) (0) ippoolv4: EXPAND Allocated IP: %{reply:Framed-IP-Address} from %{control:Pool-Name} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name}) (0) ippoolv4: --> Allocated IP: 100.101.163.110 from cgnat_pool (did cli port user 2518932data(a)turk.net) (0) [ippoolv4] = ok (0) if ( &Customer-Static-IPv6 == 1 && &User-Group-Name != "Suspend" && &User-Group-Name != "Closed" && &User-Group-Name != "Freeze" ) { (0) if ( &Customer-Static-IPv6 == 1 && &User-Group-Name != "Suspend" && &User-Group-Name != "Closed" && &User-Group-Name != "Freeze" ) -> FALSE (0) sqlrw: EXPAND .query (0) sqlrw: --> .query (0) sqlrw: Using query template 'query' rlm_sql (sqlrw): Reserved connection (2) (0) sqlrw: EXPAND %{User-Name} (0) sqlrw: --> 2518932data(a)turk.net (0) sqlrw: SQL-User-Name set to '2518932data(a)turk.net' (0) sqlrw: EXPAND INSERT INTO radpostauth (username, pass, reply, callingstationid, authdate) VALUES('%{User-Name}', '%{%{User-Password}:-Chap-Password}', '%{reply:Packet-Type}', '%{Calling-Station-Id}', NOW()) (0) sqlrw: --> INSERT INTO radpostauth (username, pass, reply, callingstationid, authdate) VALUES('2518932data(a)turk.net', 'f89cedf00c', 'Access-Accept', '', NOW()) (0) sqlrw: Executing query: INSERT INTO radpostauth (username, pass, reply, callingstationid, authdate) VALUES('2518932data(a)turk.net', 'f89cedf00c', 'Access-Accept', '', NOW()) rlm_sql_postgresql: Status: PGRES_COMMAND_OK rlm_sql_postgresql: query affected rows = 1 (0) sqlrw: SQL query returned: success (0) sqlrw: 1 record(s) updated rlm_sql (sqlrw): Released connection (2) (0) [sqlrw] = ok (0) policy remove_reply_message_if_eap { (0) if (&reply:EAP-Message && &reply:Reply-Message) { (0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (0) else { (0) [noop] = noop (0) } # else = noop (0) } # policy remove_reply_message_if_eap = noop (0) } # post-auth = ok (0) Login OK: [2518932data(a)turk.net/f89cedf00c] (from client local port 0) (0) Sent Access-Accept Id 123 from 10.2.134.250:1812 to 10.2.134.249:51420 length 227 (0) Cisco-AVPair = "ip:dns-servers=193.192.98.8 212.154.100.18" (0) Cisco-AVPair = "ip:vrf-id=CGNAT" (0) Cisco-Account-Info = "AINTERNET" (0) Service-Type = Framed-User (0) Framed-Protocol = PPP (0) Cisco-AVPair = "ip:ip-unnumbered=Loopback 10" (0) Cisco-AVPair = "ipv6-dns-servers-addr=2A02:FF0:2:327:193:192:98:30" (0) Proxy-State = 0x323134 (0) Framed-IP-Address = 100.101.163.110 (0) Finished request Waking up in 4.9 seconds. (0) Cleaning up request packet ID 123 with timestamp +3 due to cleanup_delay was reached Ready to process requests Best Regards,

2 3

freeradius LDAP module issue with reading big cn
by Дмитрий 10 Jan '25

10 Jan '25

In process of authorization user when user has a list of group, and one of them too long as example: memberOf: cn=DMB - System Administration Department - System Administrator,cn= DMB - System Administration Department,cn=DMB - Internal IT Support Departmen t,cn=DMB - Infrastructure Department,cn=DMB - Global Finance Department,cn=DM B - Global Services,cn=DMB - Corporate,cn=Departments,cn=Example,cn=Tenants,cn =Access Control Root,ou=Keycloak,ou=Groups,dc=example,dc=com and target group for authorization located after that group, freeradius authorization process rejecting request with login incorrect: Auth: (0) Login incorrect (Group DN "cn=DMB - System Administration Department - System Administrator,cn=DMB - System Administration Department,cn=DMB - Internal IT Support Department,cn=DMB - Infrastructure Department,cn=DMB - Global Finance Department,cn=DMB - Global Services,cn=: [username] (from client Incubator_switch port 0)

2 3

Re: EAP-TEAP not doing 2nd inner Method
by Alan DeKok 03 Jan '25

03 Jan '25

I've pushed a large number of changes which fix a whole lot of things in TEAP. There are also sample eapol_test configuration files in src/tests/eap-teap-*.conf. These work with the lasted commit of hostap / wpa_supplicant / eapol_test. i..e Jouni Malinen and I spent about a week over the holidays going through all kinds of crazy TEAP issues. He's pushed fixes to wpa_supplicant, and I've pushed fixes to FreeRADIUS. Alan DeKok.

1 0

No auth requests through TLS tunnel if connection was checked
by nabble＠felix.world 03 Jan '25

03 Jan '25

Hi there, I want to make some additional checks for RadSec connections. After I’ve set `check_client_connections` to `yes`, the server is handling the connection over the auth type "Autz-Type New-TLS-Connection”. So far so good but after the connection has accepted, no further traffic is reaching the radius server. I can see in packet captures that Access-Requests are send to the server and on the server netstat is also showing that packets are going to the socket which FreeRADIUS opens but only the queue is getting higher and never processed. After seeing this behaviour, of course also tested the behaviour with the default config. Just enabled tls, changed the `check_client_connections` and added a ip wildcard to the radsec clients. Since I haven’t found any open GitHub issue or something on this list I assume either no one is using the functionality or there is something I’ve overlooked. The radius server is running as docker container but that shouldn't make any difference. Output from $ netstat -apc: ``` Active UNIX domain sockets (servers and established) Proto RefCnt Flags Type State I-Node PID/Program name Path Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 0.0.0.0:2083 0.0.0.0:* LISTEN 61/radiusd tcp 468 0 ae7fb3711088:2083 192.168.215.1:19729 ESTABLISHED 61/radiusd udp 0 0 0.0.0.0:45552 0.0.0.0:* 61/radiusd udp 0 0 localhost:18120 0.0.0.0:* 61/radiusd udp 0 0 0.0.0.0:radius 0.0.0.0:* 61/radiusd udp 0 0 0.0.0.0:radius-acct 0.0.0.0:* 61/radiusd udp6 0 0 [::]:radius [::]:* 61/radiusd udp6 0 0 [::]:radius-acct [::]:* 61/radiusd udp6 0 0 [::]:52860 [::]:* 61/radiusd ``` FreeRADIUS debug log: FreeRADIUS Version 3.2.4 Copyright (C) 1999-2023 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/local/share/freeradius/dictionary including dictionary file /usr/local/share/freeradius/dictionary.dhcp including dictionary file /usr/local/share/freeradius/dictionary.vqp including dictionary file /usr/local/etc/raddb/dictionary including configuration file /usr/local/etc/raddb/radiusd.conf including configuration file /usr/local/etc/raddb/proxy.conf including configuration file /usr/local/etc/raddb/clients.conf including files in directory /usr/local/etc/raddb/mods-enabled/ including configuration file /usr/local/etc/raddb/mods-enabled/always including configuration file /usr/local/etc/raddb/mods-enabled/attr_filter including configuration file /usr/local/etc/raddb/mods-enabled/chap including configuration file /usr/local/etc/raddb/mods-enabled/date including configuration file /usr/local/etc/raddb/mods-enabled/detail including configuration file /usr/local/etc/raddb/mods-enabled/detail.log including configuration file /usr/local/etc/raddb/mods-enabled/digest including configuration file /usr/local/etc/raddb/mods-enabled/dynamic_clients including configuration file /usr/local/etc/raddb/mods-enabled/eap including configuration file /usr/local/etc/raddb/mods-enabled/echo including configuration file /usr/local/etc/raddb/mods-enabled/exec including configuration file /usr/local/etc/raddb/mods-enabled/expiration including configuration file /usr/local/etc/raddb/mods-enabled/expr including configuration file /usr/local/etc/raddb/mods-enabled/files including configuration file /usr/local/etc/raddb/mods-enabled/linelog including configuration file /usr/local/etc/raddb/mods-enabled/logintime including configuration file /usr/local/etc/raddb/mods-enabled/mschap including configuration file /usr/local/etc/raddb/mods-enabled/ntlm_auth including configuration file /usr/local/etc/raddb/mods-enabled/pap including configuration file /usr/local/etc/raddb/mods-enabled/passwd including configuration file /usr/local/etc/raddb/mods-enabled/preprocess including configuration file /usr/local/etc/raddb/mods-enabled/radutmp including configuration file /usr/local/etc/raddb/mods-enabled/realm including configuration file /usr/local/etc/raddb/mods-enabled/replicate including configuration file /usr/local/etc/raddb/mods-enabled/soh including configuration file /usr/local/etc/raddb/mods-enabled/sradutmp including configuration file /usr/local/etc/raddb/mods-enabled/totp including configuration file /usr/local/etc/raddb/mods-enabled/unix including configuration file /usr/local/etc/raddb/mods-enabled/unpack including configuration file /usr/local/etc/raddb/mods-enabled/utf8 including files in directory /usr/local/etc/raddb/policy.d/ including configuration file /usr/local/etc/raddb/policy.d/abfab-tr including configuration file /usr/local/etc/raddb/policy.d/accounting including configuration file /usr/local/etc/raddb/policy.d/canonicalization including configuration file /usr/local/etc/raddb/policy.d/control including configuration file /usr/local/etc/raddb/policy.d/cui including configuration file /usr/local/etc/raddb/policy.d/debug including configuration file /usr/local/etc/raddb/policy.d/dhcp including configuration file /usr/local/etc/raddb/policy.d/eap including configuration file /usr/local/etc/raddb/policy.d/filter including configuration file /usr/local/etc/raddb/policy.d/moonshot-targeted-ids including configuration file /usr/local/etc/raddb/policy.d/operator-name including configuration file /usr/local/etc/raddb/policy.d/rfc7542 including files in directory /usr/local/etc/raddb/sites-enabled/ including configuration file /usr/local/etc/raddb/sites-enabled/default including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel including configuration file /usr/local/etc/raddb/sites-enabled/tls main { security { allow_core_dumps = no } name = "radiusd" prefix = "/usr/local" localstatedir = "/usr/local/var" logdir = "/usr/local/var/log/radius" run_dir = "/usr/local/var/run/radiusd" } main { name = "radiusd" prefix = "/usr/local" localstatedir = "/usr/local/var" sbindir = "/usr/local/sbin" logdir = "/usr/local/var/log/radius" run_dir = "/usr/local/var/run/radiusd" libdir = "/usr/local/lib" radacctdir = "/usr/local/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 proxy_dedup_window = 1 cleanup_delay = 5 max_requests = 16384 postauth_client_lost = no pidfile = "/usr/local/var/run/radiusd/radiusd.pid" checkrad = "/usr/local/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes allow_vulnerable_openssl = "no" } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { nonblock = no ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server tls { nonblock = no ipaddr = 127.0.0.1 port = 2083 type = "auth" proto = "tcp" secret = <<< secret >>> response_window = 30.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "none" ping_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 300 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } tls { verify_depth = 0 ca_path = "/usr/local/etc/raddb/certs" pem_file_type = yes private_key_file = "/usr/local/etc/raddb/certs/client.pem" certificate_file = "/usr/local/etc/raddb/certs/client.pem" ca_file = "/usr/local/etc/raddb/certs/ca.pem" private_key_password = <<< secret >>> fragment_size = 8192 include_length = yes check_crl = no cipher_list = "DEFAULT" ca_path_reload_interval = 0 ecdh_curve = "prime256v1" tls_min_version = "1.2" } connect_timeout = 30 home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } home_server_pool tls { type = fail-over home_server = tls } realm tls { auth_pool = tls } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Autz-Type = New-TLS-Connection radiusd: #### Instantiating modules #### modules { # Loaded module rlm_always # Loading module "reject" from file /usr/local/etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /usr/local/etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /usr/local/etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /usr/local/etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /usr/local/etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /usr/local/etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /usr/local/etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /usr/local/etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /usr/local/etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/usr/local/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/usr/local/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/usr/local/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/usr/local/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/usr/local/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.coa" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.coa { filename = "/usr/local/etc/raddb/mods-config/attr_filter/coa" key = "%{User-Name}" relaxed = no } # Loaded module rlm_chap # Loading module "chap" from file /usr/local/etc/raddb/mods-enabled/chap # Loaded module rlm_date # Loading module "date" from file /usr/local/etc/raddb/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" utc = no } # Loading module "wispr2date" from file /usr/local/etc/raddb/mods-enabled/date date wispr2date { format = "%Y-%m-%dT%H:%M:%S" utc = no } # Loaded module rlm_detail # Loading module "detail" from file /usr/local/etc/raddb/mods-enabled/detail detail { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no dates_as_integer = no escape_filenames = no log_packet_header = no } # Loading module "auth_log" from file /usr/local/etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no dates_as_integer = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /usr/local/etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no dates_as_integer = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no dates_as_integer = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no dates_as_integer = no escape_filenames = no log_packet_header = no } # Loaded module rlm_digest # Loading module "digest" from file /usr/local/etc/raddb/mods-enabled/digest # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /usr/local/etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_eap # Loading module "eap" from file /usr/local/etc/raddb/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 max_eap_type = 52 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 dedup_key = "" } # Loaded module rlm_exec # Loading module "echo" from file /usr/local/etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loading module "exec" from file /usr/local/etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_expiration # Loading module "expiration" from file /usr/local/etc/raddb/mods-enabled/expiration # Loaded module rlm_expr # Loading module "expr" from file /usr/local/etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_files # Loading module "files" from file /usr/local/etc/raddb/mods-enabled/files files { filename = "/usr/local/etc/raddb/mods-config/files/authorize" acctusersfile = "/usr/local/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/usr/local/etc/raddb/mods-config/files/pre-proxy" } # Loaded module rlm_linelog # Loading module "linelog" from file /usr/local/etc/raddb/mods-enabled/linelog linelog { filename = "/usr/local/var/log/radius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /usr/local/etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/usr/local/var/log/radius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_logintime # Loading module "logintime" from file /usr/local/etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_mschap # Loading module "mschap" from file /usr/local/etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loading module "ntlm_auth" from file /usr/local/etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_pap # Loading module "pap" from file /usr/local/etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /usr/local/etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_preprocess # Loading module "preprocess" from file /usr/local/etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/usr/local/etc/raddb/mods-config/preprocess/huntgroups" hints = "/usr/local/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_radutmp # Loading module "radutmp" from file /usr/local/etc/raddb/mods-enabled/radutmp radutmp { filename = "/usr/local/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_realm # Loading module "IPASS" from file /usr/local/etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /usr/local/etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "bangpath" from file /usr/local/etc/raddb/mods-enabled/realm realm bangpath { format = "prefix" delimiter = "!" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /usr/local/etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /usr/local/etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\" ignore_default = no ignore_null = no } # Loaded module rlm_replicate # Loading module "replicate" from file /usr/local/etc/raddb/mods-enabled/replicate # Loaded module rlm_soh # Loading module "soh" from file /usr/local/etc/raddb/mods-enabled/soh soh { dhcp = yes } # Loading module "sradutmp" from file /usr/local/etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/usr/local/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_totp # Loading module "totp" from file /usr/local/etc/raddb/mods-enabled/totp totp { time_step = 30 otp_length = 8 lookback_steps = 1 lookback_interval = 30 } # Loaded module rlm_unix # Loading module "unix" from file /usr/local/etc/raddb/mods-enabled/unix unix { radwtmp = "/usr/local/var/log/radius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_unpack # Loading module "unpack" from file /usr/local/etc/raddb/mods-enabled/unpack # Loaded module rlm_utf8 # Loading module "utf8" from file /usr/local/etc/raddb/mods-enabled/utf8 instantiate { } # Instantiating module "reject" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "fail" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "ok" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "handled" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "invalid" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "userlock" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "notfound" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "noop" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "updated" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "attr_filter.post-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /usr/local/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /usr/local/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /usr/local/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/accounting_response # Instantiating module "attr_filter.coa" from file /usr/local/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/coa # Instantiating module "detail" from file /usr/local/etc/raddb/mods-enabled/detail # Instantiating module "auth_log" from file /usr/local/etc/raddb/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /usr/local/etc/raddb/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log # Instantiating module "eap" from file /usr/local/etc/raddb/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/usr/local/etc/raddb/certs" pem_file_type = yes private_key_file = "/usr/local/etc/raddb/certs/server.pem" certificate_file = "/usr/local/etc/raddb/certs/server.pem" ca_file = "/usr/local/etc/raddb/certs/ca.pem" private_key_password = <<< secret >>> fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no ca_path_reload_interval = 0 cipher_list = "DEFAULT" cipher_server_preference = no reject_unknown_intermediate_ca = no ecdh_curve = "" tls_max_version = "1.2" tls_min_version = "1.2" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "expiration" from file /usr/local/etc/raddb/mods-enabled/expiration # Instantiating module "files" from file /usr/local/etc/raddb/mods-enabled/files reading pairlist file /usr/local/etc/raddb/mods-config/files/authorize reading pairlist file /usr/local/etc/raddb/mods-config/files/accounting reading pairlist file /usr/local/etc/raddb/mods-config/files/pre-proxy # Instantiating module "linelog" from file /usr/local/etc/raddb/mods-enabled/linelog # Instantiating module "log_accounting" from file /usr/local/etc/raddb/mods-enabled/linelog # Instantiating module "logintime" from file /usr/local/etc/raddb/mods-enabled/logintime # Instantiating module "mschap" from file /usr/local/etc/raddb/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "pap" from file /usr/local/etc/raddb/mods-enabled/pap # Instantiating module "etc_passwd" from file /usr/local/etc/raddb/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "preprocess" from file /usr/local/etc/raddb/mods-enabled/preprocess reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/hints # Instantiating module "IPASS" from file /usr/local/etc/raddb/mods-enabled/realm # Instantiating module "suffix" from file /usr/local/etc/raddb/mods-enabled/realm # Instantiating module "bangpath" from file /usr/local/etc/raddb/mods-enabled/realm # Instantiating module "realmpercent" from file /usr/local/etc/raddb/mods-enabled/realm # Instantiating module "ntdomain" from file /usr/local/etc/raddb/mods-enabled/realm # Instantiating module "totp" from file /usr/local/etc/raddb/mods-enabled/totp } # modules radiusd: #### Loading Virtual Servers #### server { # from file /usr/local/etc/raddb/radiusd.conf } # server server default { # from file /usr/local/etc/raddb/sites-enabled/default # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type CHAP for attr Auth-Type Compiling Auth-Type MS-CHAP for attr Auth-Type # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) Ignoring "ldap" (see raddb/mods-available/README.rst) Compiling Autz-Type New-TLS-Connection for attr Autz-Type # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} Compiling Post-Auth-Type REJECT for attr Post-Auth-Type Compiling Post-Auth-Type Challenge for attr Post-Auth-Type Compiling Post-Auth-Type Client-Lost for attr Post-Auth-Type } # server default server inner-tunnel { # from file /usr/local/etc/raddb/sites-enabled/inner-tunnel # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type CHAP for attr Auth-Type Compiling Auth-Type MS-CHAP for attr Auth-Type # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /usr/local/etc/raddb/sites-enabled/inner-tunnel:366 Compiling Post-Auth-Type REJECT for attr Post-Auth-Type } # server inner-tunnel thread pool { start_servers = 5 max_servers = 32 min_spare_servers = 3 max_spare_servers = 10 max_requests_per_server = 0 cleanup_delay = 5 max_queue_size = 65536 auto_limit_acct = no } Thread spawned new child 1. Total threads in pool: 1 Thread spawned new child 2. Total threads in pool: 2 Thread spawned new child 3. Total threads in pool: 3 Thread 1 waiting to be assigned a request Thread spawned new child 4. Total threads in pool: 4 Thread 3 waiting to be assigned a request Thread 4 waiting to be assigned a request Thread spawned new child 5. Total threads in pool: 5 Thread pool initialized radiusd: #### Opening IP addresses and Ports #### Thread 2 waiting to be assigned a request Thread 5 waiting to be assigned a request listen { type = "auth+acct" virtual_server = "default" ipaddr = * port = 2083 proto = "tcp" tls { verify_depth = 0 ca_path = "/usr/local/etc/raddb/certs" pem_file_type = yes private_key_file = "/usr/local/etc/raddb/certs/server.pem" certificate_file = "/usr/local/etc/raddb/certs/server.pem" ca_file = "/usr/local/etc/raddb/certs/ca.pem" private_key_password = <<< secret >>> fragment_size = 8192 include_length = yes auto_chain = yes check_crl = no check_all_crl = no ca_path_reload_interval = 3600 cipher_list = "DEFAULT" cipher_server_preference = no require_client_cert = yes reject_unknown_intermediate_ca = no ecdh_curve = "prime256v1" tls_max_version = "1.3" tls_min_version = "1.2" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = no use_nonce = yes timeout = 0 softfail = no } } check_client_connections = yes limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } clients = "radsec" client 127.0.0.1 { ipaddr = * require_message_authenticator = no secret = <<< secret >>> proto = "tls" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } } listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth+acct proto tcp address * port 2083 (TLS) bound to server default Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on proxy address * port 45552 Listening on proxy address :: port 52860 Ready to process requests ... new connection request on TCP socket Listening on auth+acct from client (192.168.215.1, 19729) -> (*, 2083, virtual-server=default) Waking up in 0.4 seconds. (0) (TLS) RADIUS/TLS -Initiating new session (0) (TLS) RADIUS/TLS - Setting verify mode to require certificate from client (0) (TLS) RADIUS/TLS - Handshake state - before SSL initialization (0) (TLS) RADIUS/TLS - Handshake state - Server before SSL initialization (0) (TLS) RADIUS/TLS - Handshake state - Server before SSL initialization (0) (TLS) RADIUS/TLS - recv TLS 1.3 Handshake, ClientHello (0) (TLS) RADIUS/TLS - Handshake state - Server SSLv3/TLS read client hello (0) (TLS) RADIUS/TLS - send TLS 1.3 Handshake, ServerHello (0) (TLS) RADIUS/TLS - Handshake state - Server SSLv3/TLS write server hello (0) (TLS) RADIUS/TLS - send TLS 1.3 ChangeCipherSpec (0) (TLS) RADIUS/TLS - Handshake state - Server SSLv3/TLS write change cipher spec (0) (TLS) RADIUS/TLS - Handshake state - Server TLSv1.3 early data (0) (TLS) RADIUS/TLS - Server : Need to read more data: TLSv1.3 early data (0) (TLS) RADIUS/TLS - In Handshake Phase Waking up in 0.4 seconds. (0) (TLS) RADIUS/TLS - Handshake state - Server TLSv1.3 early data (0) (TLS) RADIUS/TLS - recv TLS 1.3 Handshake, ClientHello (0) (TLS) RADIUS/TLS - Handshake state - Server SSLv3/TLS read client hello (0) (TLS) RADIUS/TLS - send TLS 1.3 Handshake, ServerHello (0) (TLS) RADIUS/TLS - Handshake state - Server SSLv3/TLS write server hello (0) (TLS) RADIUS/TLS - send TLS 1.3 Handshake, EncryptedExtensions (0) (TLS) RADIUS/TLS - Handshake state - Server TLSv1.3 write encrypted extensions (0) (TLS) RADIUS/TLS - send TLS 1.3 Handshake, CertificateRequest (0) (TLS) RADIUS/TLS - Handshake state - Server SSLv3/TLS write certificate request (0) (TLS) RADIUS/TLS - send TLS 1.3 Handshake, Certificate (0) (TLS) RADIUS/TLS - Handshake state - Server SSLv3/TLS write certificate (0) (TLS) RADIUS/TLS - send TLS 1.3 Handshake, CertificateVerify (0) (TLS) RADIUS/TLS - Handshake state - Server TLSv1.3 write server certificate verify (0) (TLS) RADIUS/TLS - send TLS 1.3 Handshake, Finished (0) (TLS) RADIUS/TLS - Handshake state - Server SSLv3/TLS write finished (0) (TLS) RADIUS/TLS - Handshake state - Server TLSv1.3 early data (0) (TLS) RADIUS/TLS - Server : Need to read more data: TLSv1.3 early data (0) (TLS) RADIUS/TLS - In Handshake Phase Waking up in 0.4 seconds. (0) (TLS) RADIUS/TLS - Handshake state - Server TLSv1.3 early data (0) (TLS) RADIUS/TLS - recv TLS 1.3 Handshake, Certificate (0) (TLS) RADIUS/TLS - Creating attributes from client certificate (0) TLS-Client-Cert-Serial := "2aef75f0ea7f49c68b28781d7a6a2ff9" (0) TLS-Client-Cert-Expiration := "340208105559Z" (0) TLS-Client-Cert-Valid-Since := "240208104559Z" (0) TLS-Client-Cert-Subject := "/CN=BoilerPlate" (0) TLS-Client-Cert-Issuer := "/CN=BoilerPlate" (0) TLS-Client-Cert-Common-Name := "BoilerPlate" (0) TLS-Client-Cert-Subject-Alt-Name-Dns := "radius.BoilerPlate.net" (0) TLS-Client-Cert-X509v3-Basic-Constraints += "CA:FALSE" (0) TLS-Client-Cert-X509v3-Authority-Key-Identifier += "73:D2:45:9F:1A:5B:BB:04:31:0D:2B:52:A8:66:F9:72:EB:12:D1:54" (0) TLS-Client-Cert-X509v3-Subject-Key-Identifier += "73:D2:45:9F:1A:5B:BB:04:31:0D:2B:52:A8:66:F9:72:EB:12:D1:54" Certificate chain - 0 intermediate CA cert(s) untrusted To forbid these certificates see 'reject_unknown_intermediate_ca' (TLS) untrusted certificate with depth [0] subject name /CN=BoilerPlate (0) (TLS) RADIUS/TLS - Handshake state - Server SSLv3/TLS read client certificate (0) (TLS) RADIUS/TLS - recv TLS 1.3 Handshake, CertificateVerify (0) (TLS) RADIUS/TLS - Handshake state - Server SSLv3/TLS read certificate verify (0) (TLS) RADIUS/TLS - recv TLS 1.3 Handshake, Finished (0) (TLS) RADIUS/TLS - Handshake state - Server SSLv3/TLS read finished (0) (TLS) RADIUS/TLS - Handshake state - SSL negotiation finished successfully (0) (TLS) RADIUS/TLS - Connection Established (0) TLS-Session-Cipher-Suite = "TLS_AES_256_GCM_SHA384" (0) TLS-Session-Version = "TLS 1.3" (0) (TLS) RADIUS/TLS - Application data. Threads: total/active/spare threads = 5/0/5 Waking up in 0.3 seconds. Thread 5 got semaphore Thread 5 handling request 0, (1 handled so far) (0) (TLS) Checking connection to see if it is authorized. (0) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (0) Autz-Type New-TLS-Connection { (0) [ok] = ok (0) } # Autz-Type New-TLS-Connection = ok (0) (TLS) Connection is authorized (0) Sent Access-Accept Id 4294967295 from 0.0.0.0:2083 to 192.168.215.1:19729 length 0 (0) Finished request Thread 5 waiting to be assigned a request Waking up in 4.5 seconds. (0) Cleaning up request packet ID 4294967295 with timestamp +7 due to cleanup_delay was reached Ready to process requests BR, Lineconnect

3 11