- Freeradius-Users - lists.freeradius.org

Re: EAP-TEAP not doing 2nd inner Method
by Alan DeKok 11 Dec '24

11 Dec '24

On Dec 6, 2024, at 5:09 AM, Martin B. <martinbiniek(a)googlemail.com> wrote: > >> (5) eap_teap: Deriving EAP-TEAP keys > >> ASSERT FAILED src/modules/rlm_eap/types/rlm_eap_teap/eap_teap.c[77]: t->received_version > -1 > > > > Well, that's new. :( > > I've pushed a fix for that. > The error does not occur anymore. > The server never changes the Identity-Type though and is always requesting Machine over and over again until it receives a Failure result from the client. ... > (0) eap_teap: Setting &session-state:FreeRADIUS-EAP-TEAP-Identity-Type = Machine > (0) eap_teap: Followed by &session-state:FreeRADIUS-EAP-TEAP-Identity-Type += Machine Well that's wrong. I've pushed a fix. Alan DeKok.

2 2

Unlang operations with IP addresses
by Ľudovít Mikula 11 Dec '24

11 Dec '24

Hello, I am trying to figure out how to compute IP address from a range and netmask in freeradius v3. Actually something similar like this expression in v4: %{eval:%{DHCP-Your-IP-Address} & %{DHCP-Subnet-Mask} + 1} Thank you. Ludo

4 7

Trouble with OCSP
by Orion Poplawski 09 Dec '24

09 Dec '24

Hello, We setup OCSP validation on our FreeRADIUS servers a while back and it had been working great until yesterday when we started seeing errors like: Dec 03 14:03:09 radiusd[109894]: (437) eap_tls: ERROR: (TLS) Alert write:fatal:internal error Dec 03 14:03:09 radiusd[109894]: (437) eap_tls: ERROR: (TLS) Server : Error in error Dec 03 14:03:09 radiusd[109894]: (437) eap_tls: ERROR: (TLS) Failed reading from OpenSSL Dec 03 14:03:09 radiusd[109894]: (437) Login incorrect (eap_tls: ocsp: Couldn't get OCSP response): [HOSTNAME] We discovered some errors on our Windows OCSP responders due to configuration certificates expiring and resolved that. However, even after that Windows machines are unable to authenticate. Running in debug mode we see: Certificate chain - 1 cert(s) untrusted (TLS) untrusted certificate with depth [0] subject name /CN=staff01.ad.nwra.com (14) eap_tls: Starting OCSP Request (14) eap_tls: WARNING: (TLS) ocsp: No OCSP URL in certificate, falling back to configured URL (14) eap_tls: ocsp: Using responder URL "http://ocsp.ad.nwra.com:80/ocsp/" (14) eap_tls: ERROR: ocsp: Couldn't verify OCSP basic response (14) eap_tls: ERROR: (TLS) ocsp: Certificate has been expired/revoked (14) eap_tls: (TLS) send TLS 1.2 Alert, fatal internal_error (14) eap_tls: ERROR: (TLS) Alert write:fatal:internal error (14) eap_tls: ERROR: (TLS) Server : Error in error (14) eap_tls: ERROR: (TLS) Failed reading from OpenSSL (14) eap_tls: ERROR: (TLS) error:13800070:OCSP routines::root ca not trusted (14) eap_tls: ERROR: (TLS) error:0A000086:SSL routines::certificate verify failed (14) eap_tls: ERROR: (TLS) System call (I/O) error (-1) (14) eap_tls: ERROR: (TLS) EAP Receive handshake failed during operation (14) eap_tls: ERROR: [eaptls process] = fail (14) eap: ERROR: Failed continuing EAP TLS (13) session. EAP sub-module failed We have 3 certificates in the FreeRADIUS ca_file configuration - an AD CA cert that is expiring in about 18 months, a new AD CA cert that was issued in October, and an IPA CA cert - and that's been the case since the new AD CA cert was issued. That should cover all of the certificates issued internally, so I don't see why radiusd is complaining about an untrusted cert. Running openssl ocsp checks against the Windows ocsp responders work fine. I'm at a loss. Any ideas, things to check? ocsp config is simply enable = yes, and specifying the url fallback shown above. This is with freeradius-3.0.20-15.module_el8.10.0+3873+5b7fed0f.x86_64 freeradius-3.0.21-40.el9_4.x86_64 -- Orion Poplawski he/him/his - surely the least important thing about me IT Systems Manager 720-772-5637 NWRA, Boulder/CoRA Office FAX: 303-415-9702 3380 Mitchell Lane orion(a)nwra.com Boulder, CO 80301 https://www.nwra.com/

3 8

Does freeRADIUS tracks previous authentication results?
by Vedsar Kushwaha 09 Dec '24

09 Dec '24

I'm seeing the following logs: "Login incorrect (eap_peap: The user's session was previously rejected; returning reject (again))." I'm interested in the "again" word at the end of the log. How does FreeRADIUS know that the user authentication was previously rejected? Is it because FreeRADIUS maintains a state? If so, for how long does FreeRADIUS maintain this state? Juniper Business Use Only

2 1

Request: Create an Official Helm Chart for FreeRADIUS
by Luca Borruto 06 Dec '24

06 Dec '24

Hi FreeRADIUS Development Team, First, thank you for all the hard work you’ve done on FreeRADIUS. It’s a critical part of our authentication infrastructure, and we rely on its flexibility and reliability every day. We’re moving more of our services to Kubernetes, and we’d love to include FreeRADIUS in this effort. Deploying it on Kubernetes would allow us to: • *Scale* FreeRADIUS easily as demand grows. • *Increase reliability* using Kubernetes features like auto-recovery. • *Simplify deployments* with tools like Helm. *Existing Unofficial Helm Chart* We are aware that an unofficial Helm chart for FreeRADIUS exists, but it is no longer maintained. While it has been helpful, having an *officially supported chart* would ensure best practices are followed and would provide the community with a reliable solution. *Our Request* Would it be possible for the FreeRADIUS team to create and maintain an official Helm chart? An official chart would help many users deploy FreeRADIUS on Kubernetes more easily and align with modern deployment practices. *How We Can Help* We’d be happy to contribute to this effort by: • Testing the chart and providing feedback. • Helping with documentation or maintenance if needed. We believe this would make FreeRADIUS even more accessible to organizations moving to Kubernetes. Let us know if this is something you’d consider, or if there’s already work happening in this area. Thanks in advance for your time and consideration! Best regards, Luca

3 2

Re: EAP-TEAP not doing 2nd inner Method
by Martin B. 06 Dec '24

06 Dec '24

> > I really just suggest avoiding TEAP if at all possible. I don't see how > the method chaining helps anything. Doing both Machine and User auth is > pretty pointless when both credentials are cached on the same machine. > It's not like the user is prompted for an OTP, or some other method which > proves that the user was present. > TEAP method change is just using *two* cached credentials instead of > one. It offers no more security than using one cached credential. I would like to implement EAP-TEAP because it should (theoretically) be possible that even if one of the two identities could not get verified (e.g., because there is no user certificate on the client yet), the server returns an Access-Accept, and depending on which of the two identities failed, the client is placed in a specific VLAN. If a user logs in to a client where only a machine certificate exists, the RADIUS server could detect this with the help of EAP-TEAP (because the user certificate does not exist and therefore no EAP-Identity is present) and the client could be placed in a network where it automatically receives the required user certificate. After receiving the certificate, a re-auth of the client would need to be performed so that it can be determined that both identities have been verified and the client can then access the internal company network. I tried to achieve this behavior by adding the custom EAP-TEAP configuration you provided to my FreeRADIUS and playing with the configuration a bit, but so far without success. Even if the FreeRADIUS server receives an "Unknown EAP-Identity" and then sends back an Access-Accept, the client remains disconnected from the network. Probably because the client only wants to connect to the network when both the server and the client have processed a "FreeRADIUS-EAP-TEAP-Result = Success". Do you plan on implementing this or is FreeRADIUS already capable of such behavior? And also, thank you for your help Alan. I really appreciate that.

2 1

Users can't authenticate
by Federico Vissani DPV 06 Dec '24

06 Dec '24

Hi, I'm new in this list. It's my first post. I'll talk you about my topology, we have seven Ubiquiti UAP, when the users try to connect freeradius server reject them saying (log below was generated with freeradius -X): FreeRADIUS Version 3.0.26 Copyright (C) 1999-2021 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/3.0/dictionary including configuration file /etc/freeradius/3.0/radiusd.conf including configuration file /etc/freeradius/3.0/proxy.conf including configuration file /etc/freeradius/3.0/clients.conf including files in directory /etc/freeradius/3.0/mods-enabled/ including configuration file /etc/freeradius/3.0/mods-enabled/radutmp including configuration file /etc/freeradius/3.0/mods-enabled/expr including configuration file /etc/freeradius/3.0/mods-enabled/always including configuration file /etc/freeradius/3.0/mods-enabled/exec including configuration file /etc/freeradius/3.0/mods-enabled/detail.log including configuration file /etc/freeradius/3.0/mods-enabled/files including configuration file /etc/freeradius/3.0/mods-enabled/detail including configuration file /etc/freeradius/3.0/mods-enabled/mschap including configuration file /etc/freeradius/3.0/mods-enabled/digest including configuration file /etc/freeradius/3.0/mods-enabled/logintime including configuration file /etc/freeradius/3.0/mods-enabled/preprocess including configuration file /etc/freeradius/3.0/mods-enabled/linelog including configuration file /etc/freeradius/3.0/mods-enabled/realm including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter including configuration file /etc/freeradius/3.0/mods-enabled/echo including configuration file /etc/freeradius/3.0/mods-enabled/soh including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap including configuration file /etc/freeradius/3.0/mods-enabled/pap including configuration file /etc/freeradius/3.0/mods-enabled/eap including configuration file /etc/freeradius/3.0/mods-enabled/passwd including configuration file /etc/freeradius/3.0/mods-enabled/replicate including configuration file /etc/freeradius/3.0/mods-enabled/unpack including configuration file /etc/freeradius/3.0/mods-enabled/chap including configuration file /etc/freeradius/3.0/mods-enabled/unix including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients including configuration file /etc/freeradius/3.0/mods-enabled/expiration including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp including configuration file /etc/freeradius/3.0/mods-enabled/utf8 including files in directory /etc/freeradius/3.0/policy.d/ including configuration file /etc/freeradius/3.0/policy.d/cui including configuration file /etc/freeradius/3.0/policy.d/accounting including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/3.0/policy.d/control including configuration file /etc/freeradius/3.0/policy.d/operator-name including configuration file /etc/freeradius/3.0/policy.d/abfab-tr including configuration file /etc/freeradius/3.0/policy.d/rfc7542 including configuration file /etc/freeradius/3.0/policy.d/dhcp including configuration file /etc/freeradius/3.0/policy.d/eap including configuration file /etc/freeradius/3.0/policy.d/filter including configuration file /etc/freeradius/3.0/policy.d/debug including configuration file /etc/freeradius/3.0/policy.d/canonicalization including files in directory /etc/freeradius/3.0/sites-enabled/ including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel including configuration file /etc/freeradius/3.0/sites-enabled/default main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 postauth_client_lost = no pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes require_message_authenticator = "auto" limit_proxy_state = "auto" } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = "yes" secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client UAP-SOPORTE { ipaddr = 192.168.1.9 secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client MIKROTIK { ipaddr = 192.168.1.1 secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client VPRO-IN04 { ipaddr = 192.168.1.130 secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client VPRO-IN03 { ipaddr = 10.7.22.130 secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached systemd watchdog is disabled # Creating Auth-Type = mschap # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Auth-Type = digest # Creating Autz-Type = New-TLS-Connection radiusd: #### Instantiating modules #### modules { # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_exec # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_detail # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files files { filename = "/etc/freeradius/3.0/mods-config/files/authorize" acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy" } # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/3.0/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm realm bangpath { format = "prefix" delimiter = "!" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.coa" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.coa { filename = "/etc/freeradius/3.0/mods-config/attr_filter/coa" key = "%{User-Name}" relaxed = no } # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8 instantiate { } # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response # Instantiating module "attr_filter.coa" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/coa # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/3.0/certs" pem_file_type = yes private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key" certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem" ca_file = "/etc/ssl/certs/ca-certificates.crt" private_key_password = <<< secret >>> fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no ca_path_reload_interval = 0 cipher_list = "DEFAULT" cipher_server_preference = no reject_unknown_intermediate_ca = no ecdh_curve = "" tls_max_version = "1.2" tls_min_version = "1.2" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/3.0/radiusd.conf } # server server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type CHAP for attr Auth-Type Compiling Auth-Type MS-CHAP for attr Auth-Type # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/3.0/sites-enabled/inner-tunnel:336 Compiling Post-Auth-Type REJECT for attr Post-Auth-Type } # server inner-tunnel server default { # from file /etc/freeradius/3.0/sites-enabled/default # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type CHAP for attr Auth-Type Compiling Auth-Type MS-CHAP for attr Auth-Type # Loading authorize {...} Compiling Autz-Type New-TLS-Connection for attr Autz-Type # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} Compiling Post-Auth-Type REJECT for attr Post-Auth-Type Compiling Post-Auth-Type Challenge for attr Post-Auth-Type Compiling Post-Auth-Type Client-Lost for attr Post-Auth-Type } # server default radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on proxy address * port 41379 Listening on proxy address :: port 34068 Ready to process requests (0) Received Access-Request Id 15 from 192.168.1.9:45962 to 192.168.1.21:1812 length 218 (0) User-Name = "fede" (0) NAS-IP-Address = 192.168.1.9 (0) NAS-Identifier = "824558273779" (0) Called-Station-Id = "82-45-58-27-37-79:SupportMI" (0) NAS-Port-Type = Wireless-802.11 (0) Service-Type = Framed-User (0) Calling-Station-Id = "F6-AB-4A-A1-50-C4" (0) Connect-Info = "CONNECT 0Mbps 802.11b" (0) Acct-Session-Id = "C3485432ACC81F53" (0) Acct-Multi-Session-Id = "E1E1FB4011820C8F" (0) WLAN-Pairwise-Cipher = 1027076 (0) WLAN-Group-Cipher = 1027076 (0) WLAN-AKM-Suite = 1027073 (0) Framed-MTU = 1400 (0) EAP-Message = 0x021600090166656465 (0) Message-Authenticator = 0x4ae5f25de792e6b849d58db4d6f84a6b (0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "fede", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 22 length 9 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_md5 to process data (0) eap_md5: Issuing MD5 Challenge (0) eap: Sending EAP Request (code 1) ID 23 length 22 (0) eap: EAP session adding &reply:State = 0xb972f482b965f022 (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) Challenge { ... } # empty sub-section is ignored (0) Sent Access-Challenge Id 15 from 192.168.1.21:1812 to 192.168.1.9:45962 length 80 (0) EAP-Message = 0x011700160410983f74c67938be4fc2b549b57cf99f8a (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0xb972f482b965f022be89a9c7e2ba59ea (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 16 from 192.168.1.9:45962 to 192.168.1.21:1812 length 233 (1) User-Name = "fede" (1) NAS-IP-Address = 192.168.1.9 (1) NAS-Identifier = "824558273779" (1) Called-Station-Id = "82-45-58-27-37-79:SupportMI" (1) NAS-Port-Type = Wireless-802.11 (1) Service-Type = Framed-User (1) Calling-Station-Id = "F6-AB-4A-A1-50-C4" (1) Connect-Info = "CONNECT 0Mbps 802.11b" (1) Acct-Session-Id = "C3485432ACC81F53" (1) Acct-Multi-Session-Id = "E1E1FB4011820C8F" (1) WLAN-Pairwise-Cipher = 1027076 (1) WLAN-Group-Cipher = 1027076 (1) WLAN-AKM-Suite = 1027073 (1) Framed-MTU = 1400 (1) EAP-Message = 0x021700060334 (1) State = 0xb972f482b965f022be89a9c7e2ba59ea (1) Message-Authenticator = 0x8d61def2e55858cc8019dd326de35f89 (1) session-state: No cached attributes (1) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /(a)\./) { (1) if (&User-Name =~ /(a)\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "fede", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 23 length 6 (1) eap: No EAP Start, assuming it's an on-going EAP conversation (1) [eap] = updated (1) files: users: Matched entry fede at line 207 (1) [files] = ok (1) [expiration] = noop (1) [logintime] = noop (1) pap: WARNING: Auth-Type already set. Not setting to PAP (1) [pap] = noop (1) } # authorize = updated (1) Found Auth-Type = eap (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0xb972f482b965f022 (1) eap: Finished EAP session with state 0xb972f482b965f022 (1) eap: Previous EAP request found for state 0xb972f482b965f022, released from the list (1) eap: Peer sent packet with method EAP NAK (3) (1) eap: Peer NAK'd asking for unsupported EAP type PWD (52), skipping... (1) eap: ERROR: No mutually acceptable types found (1) eap: Sending EAP Failure (code 4) ID 23 length 4 (1) eap: Failed in EAP select (1) [eap] = invalid (1) } # authenticate = invalid (1) Failed to authenticate the user (1) Using Post-Auth-Type Reject (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) Post-Auth-Type REJECT { (1) attr_filter.access_reject: EXPAND %{User-Name} (1) attr_filter.access_reject: --> fede (1) attr_filter.access_reject: Matched entry DEFAULT at line 11 (1) [attr_filter.access_reject] = updated (1) [eap] = noop (1) policy remove_reply_message_if_eap { (1) if (&reply:EAP-Message && &reply:Reply-Message) { (1) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (1) else { (1) [noop] = noop (1) } # else = noop (1) } # policy remove_reply_message_if_eap = noop (1) } # Post-Auth-Type REJECT = updated (1) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (1) Sending delayed response (1) Sent Access-Reject Id 16 from 192.168.1.21:1812 to 192.168.1.9:45962 length 44 (1) EAP-Message = 0x04170004 (1) Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.9 seconds. (0) Cleaning up request packet ID 15 with timestamp +8 due to cleanup_delay was reached (1) Cleaning up request packet ID 16 with timestamp +8 due to cleanup_delay was reached Ready to process requests

2 1

EAP-TEAP not doing 2nd inner Method
by Martin B. 05 Dec '24

05 Dec '24

I have spent the last few days trying to get EAP-TEAP to work, but so far with only partial success. The goal of this configuration was to verify both the user certificate and the machine certificate and only allow the device access to the network if both certificates could be successfully verified. At a later stage, I would like to be able to distinguish whether only the machine certificate or both certificates were successfully verified, and accordingly grant the device different access to the network. For my tests, I created a CA which then issued the required client and server certificates. On a Windows client, I installed a client certificate for both the user and the machine, as well as the CA. On the RADIUS server, I installed a server certificate and the CA certificate. When I configure EAP-TEAP on the Windows client with only one inner EAP method (EAP-TLS), the FreeRADIUS server sends an Access-Accept back (as expected). However, as soon as I add a second inner EAP method in the EAP-TEAP configuration on the laptop (regardless of whether it is EAP-TLS or MSCHAPv2), an Access-Reject is always returned, without the second inner EAP method even being attempted. To my untrained eye, it looks like the client is sending an error back to the server, but unfortunately, there is no information about what the reason might be. I have tested this with Windows 11 and Windows 10 and tried both FreeRADIUS 3.2.4 and 3.2.6. All with the same result. Is my FreeRADIUS configuration faulty, or is the behavior of the Windows client the problem here? Attached below is the debug log of the RADIUS server when EAP-TEAP with two inner EAP methods (EAP-TLS + EAP-TLS) was configured on a Windows 11 client. I hope someone can help me with this problem. FreeRADIUS Version 3.2.6 Copyright (C) 1999-2023 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/raddb/dictionary including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/mods-enabled/ including configuration file /etc/raddb/mods-enabled/always including configuration file /etc/raddb/mods-enabled/attr_filter including configuration file /etc/raddb/mods-enabled/chap including configuration file /etc/raddb/mods-enabled/date including configuration file /etc/raddb/mods-enabled/detail including configuration file /etc/raddb/mods-enabled/detail.log including configuration file /etc/raddb/mods-enabled/digest including configuration file /etc/raddb/mods-enabled/dynamic_clients including configuration file /etc/raddb/mods-enabled/eap including configuration file /etc/raddb/mods-enabled/echo including configuration file /etc/raddb/mods-enabled/exec including configuration file /etc/raddb/mods-enabled/expiration including configuration file /etc/raddb/mods-enabled/expr including configuration file /etc/raddb/mods-enabled/files including configuration file /etc/raddb/mods-enabled/linelog including configuration file /etc/raddb/mods-enabled/logintime including configuration file /etc/raddb/mods-enabled/mschap including configuration file /etc/raddb/mods-enabled/ntlm_auth including configuration file /etc/raddb/mods-enabled/pap including configuration file /etc/raddb/mods-enabled/passwd including configuration file /etc/raddb/mods-enabled/preprocess including configuration file /etc/raddb/mods-enabled/radutmp including configuration file /etc/raddb/mods-enabled/realm including configuration file /etc/raddb/mods-enabled/replicate including configuration file /etc/raddb/mods-enabled/soh including configuration file /etc/raddb/mods-enabled/sradutmp including configuration file /etc/raddb/mods-enabled/totp including configuration file /etc/raddb/mods-enabled/unix including configuration file /etc/raddb/mods-enabled/unpack including configuration file /etc/raddb/mods-enabled/utf8 including configuration file /etc/raddb/mods-enabled/inner-eap including files in directory /etc/raddb/policy.d/ including configuration file /etc/raddb/policy.d/abfab-tr including configuration file /etc/raddb/policy.d/accounting including configuration file /etc/raddb/policy.d/canonicalization including configuration file /etc/raddb/policy.d/control including configuration file /etc/raddb/policy.d/cui including configuration file /etc/raddb/policy.d/debug including configuration file /etc/raddb/policy.d/dhcp including configuration file /etc/raddb/policy.d/eap including configuration file /etc/raddb/policy.d/filter including configuration file /etc/raddb/policy.d/moonshot-targeted-ids including configuration file /etc/raddb/policy.d/operator-name including configuration file /etc/raddb/policy.d/rfc7542 including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/inner-tunnel main { security { allow_core_dumps = no } name = "radiusd" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" } main { name = "radiusd" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" libdir = "/usr/lib64/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 proxy_dedup_window = 1 cleanup_delay = 5 max_requests = 16384 max_fds = 512 postauth_client_lost = no pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes require_message_authenticator = "auto" limit_proxy_state = "auto" allow_vulnerable_openssl = "no" } } radiusd: #### Loading Realms and Home Servers #### radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Shared secret for client localhost is short, and likely can be broken by an attacker. client localhost_ipv6 { ipv6addr = ::1 secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Shared secret for client localhost_ipv6 is short, and likely can be broken by an attacker. client 0.0.0.0/0 { ipaddr = 0.0.0.0/0 secret = <<< secret >>> proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Shared secret for client 0.0.0.0/0 is short, and likely can be broken by an attacker. Debugger not attached systemd watchdog is disabled # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Auth-Type = eap # Creating Autz-Type = New-TLS-Connection # Creating Auth-Type = inner-eap radiusd: #### Instantiating modules #### modules { # Loaded module rlm_always # Loading module "reject" from file /etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.coa" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.coa { filename = "/etc/raddb/mods-config/attr_filter/coa" key = "%{User-Name}" relaxed = no } # Loaded module rlm_chap # Loading module "chap" from file /etc/raddb/mods-enabled/chap # Loaded module rlm_date # Loading module "date" from file /etc/raddb/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" utc = no } # Loading module "wispr2date" from file /etc/raddb/mods-enabled/date date wispr2date { format = "%Y-%m-%dT%H:%M:%S" utc = no } # Loaded module rlm_detail # Loading module "detail" from file /etc/raddb/mods-enabled/detail detail { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no dates_as_integer = no escape_filenames = no log_packet_header = no } # Loading module "auth_log" from file /etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no dates_as_integer = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no dates_as_integer = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no dates_as_integer = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no dates_as_integer = no escape_filenames = no log_packet_header = no } # Loaded module rlm_digest # Loading module "digest" from file /etc/raddb/mods-enabled/digest # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_eap # Loading module "eap" from file /etc/raddb/mods-enabled/eap eap { default_eap_type = "teap" timer_expire = 60 max_eap_type = 128 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 dedup_key = "" } # Loaded module rlm_exec # Loading module "echo" from file /etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loading module "exec" from file /etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/raddb/mods-enabled/expiration # Loaded module rlm_expr # Loading module "expr" from file /etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_files # Loading module "files" from file /etc/raddb/mods-enabled/files files { filename = "/etc/raddb/mods-config/files/authorize" acctusersfile = "/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy" } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/raddb/mods-enabled/linelog linelog { filename = "/var/log/radius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/var/log/radius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loading module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_pap # Loading module "pap" from file /etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups" hints = "/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "bangpath" from file /etc/raddb/mods-enabled/realm realm bangpath { format = "prefix" delimiter = "!" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\" ignore_default = no ignore_null = no } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/raddb/mods-enabled/replicate # Loaded module rlm_soh # Loading module "soh" from file /etc/raddb/mods-enabled/soh soh { dhcp = yes } # Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_totp # Loading module "totp" from file /etc/raddb/mods-enabled/totp totp { time_step = 30 otp_length = 6 lookback_steps = 1 lookback_interval = 30 lookforward_steps = 0 } # Loaded module rlm_unix # Loading module "unix" from file /etc/raddb/mods-enabled/unix unix { radwtmp = "/var/log/radius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_unpack # Loading module "unpack" from file /etc/raddb/mods-enabled/unpack # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/raddb/mods-enabled/utf8 # Loading module "inner-eap" from file /etc/raddb/mods-enabled/inner-eap eap inner-eap { default_eap_type = "tls" timer_expire = 60 max_eap_type = 56 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 2048 dedup_key = "" } instantiate { } # Instantiating module "reject" from file /etc/raddb/mods-enabled/always # Instantiating module "fail" from file /etc/raddb/mods-enabled/always # Instantiating module "ok" from file /etc/raddb/mods-enabled/always # Instantiating module "handled" from file /etc/raddb/mods-enabled/always # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always # Instantiating module "noop" from file /etc/raddb/mods-enabled/always # Instantiating module "updated" from file /etc/raddb/mods-enabled/always # Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response # Instantiating module "attr_filter.coa" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/coa # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/raddb/certs/teap" pem_file_type = yes private_key_file = "/etc/raddb/certs/teap/server.pem" certificate_file = "/etc/raddb/certs/teap/server.pem" ca_file = "/etc/raddb/certs/teap/ca.pem" private_key_password = <<< secret >>> fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no ca_path_reload_interval = 0 cipher_list = "DEFAULT" cipher_server_preference = no reject_unknown_intermediate_ca = no ecdh_curve = "" tls_max_version = "1.2" tls_min_version = "1.2" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = no use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Linked to sub-module rlm_eap_teap teap { tls = "tls-common" default_eap_type = "tls" copy_request_to_tunnel = no use_tunneled_reply = no require_client_cert = no pac_lifetime = 604800 authority_identity = "1234" pac_opaque_key = "0123456789abcdef0123456789ABCDEF" virtual_server = "inner-tunnel" } tls: Using cached TLS configuration from previous invocation # Instantiating module "expiration" from file /etc/raddb/mods-enabled/expiration # Instantiating module "files" from file /etc/raddb/mods-enabled/files reading pairlist file /etc/raddb/mods-config/files/authorize reading pairlist file /etc/raddb/mods-config/files/accounting reading pairlist file /etc/raddb/mods-config/files/pre-proxy # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog # Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap # Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "preprocess" from file /etc/raddb/mods-enabled/preprocess reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /etc/raddb/mods-config/preprocess/hints # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm # Instantiating module "bangpath" from file /etc/raddb/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm # Instantiating module "totp" from file /etc/raddb/mods-enabled/totp # Instantiating module "inner-eap" from file /etc/raddb/mods-enabled/inner-eap # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Linked to sub-module rlm_eap_tls tls { } TLS section "tls" missing, trying to use legacy configuration tls { verify_depth = 0 pem_file_type = yes private_key_file = "/etc/raddb/certs/teap/inner-server.pem" certificate_file = "/etc/raddb/certs/teap/inner-server.pem" ca_file = "/etc/raddb/certs/teap/ca.pem" random_file = "/dev/urandom" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no ca_path_reload_interval = 0 cipher_list = "DEFAULT" reject_unknown_intermediate_ca = no ecdh_curve = "prime256v1" tls_min_version = "1.2" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = no use_nonce = yes timeout = 0 softfail = no } } } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/raddb/radiusd.conf } # server server default { # from file /etc/raddb/sites-enabled/default # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type CHAP for attr Auth-Type Compiling Auth-Type MS-CHAP for attr Auth-Type Compiling Auth-Type eap for attr Auth-Type # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) Ignoring "ldap" (see raddb/mods-available/README.rst) Compiling Autz-Type New-TLS-Connection for attr Autz-Type # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} Compiling Post-Auth-Type REJECT for attr Post-Auth-Type Compiling Post-Auth-Type Challenge for attr Post-Auth-Type Compiling Post-Auth-Type Client-Lost for attr Post-Auth-Type } # server default server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type CHAP for attr Auth-Type Compiling Auth-Type MS-CHAP for attr Auth-Type Compiling Auth-Type inner-eap for attr Auth-Type # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/raddb/sites-enabled/inner-tunnel:368 Compiling Post-Auth-Type REJECT for attr Post-Auth-Type } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 1645 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1645 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Ready to process requests (0) Received Access-Request Id 250 from 10.78.1.215:1645 to 10.78.5.223:1645 length 244 (0) User-Name = "anon" (0) Service-Type = Framed-User (0) Cisco-AVPair = "service-type=Framed" (0) Framed-MTU = 1500 (0) Called-Station-Id = "00-3C-10-AB-A2-8A" (0) Calling-Station-Id = "C8-F7-50-08-DD-9F" (0) EAP-Message = 0x0201000901616e6f6e (0) Message-Authenticator = 0xca304eec2a1585d04db6e3fa971b6b40 (0) Cisco-AVPair = "audit-session-id=0A4E01D7000006B823D3132B" (0) Cisco-AVPair = "method=dot1x" (0) NAS-IP-Address = 10.78.1.215 (0) NAS-Port-Id = "GigabitEthernet1/0/10" (0) NAS-Port-Type = Ethernet (0) NAS-Port = 50110 (0) # Executing section authorize from file /etc/raddb/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "anon", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 1 length 9 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/raddb/sites-enabled/default (0) Auth-Type eap { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_teap to process data (0) eap_teap: (TLS) TEAP -Initiating new session (0) eap: Sending EAP Request (code 1) ID 2 length 18 (0) eap: EAP session adding &reply:State = 0xc2f31397c2f12456 (0) [eap] = handled (0) if (handled && (Response-Packet-Type == Access-Challenge)) { (0) EXPAND Response-Packet-Type (0) --> Access-Challenge (0) if (handled && (Response-Packet-Type == Access-Challenge)) -> TRUE (0) if (handled && (Response-Packet-Type == Access-Challenge)) { (0) attr_filter.access_challenge: EXPAND %{User-Name} (0) attr_filter.access_challenge: --> anon (0) attr_filter.access_challenge: Matched entry DEFAULT at line 12 (0) [attr_filter.access_challenge.post-auth] = updated (0) [handled] = handled (0) } # if (handled && (Response-Packet-Type == Access-Challenge)) = handled (0) } # Auth-Type eap = handled (0) Using Post-Auth-Type Challenge (0) # Executing group from file /etc/raddb/sites-enabled/default (0) Challenge { ... } # empty sub-section is ignored (0) session-state: Saving cached attributes (0) Framed-MTU = 984 (0) Sent Access-Challenge Id 250 from 10.78.5.223:1645 to 10.78.1.215:1645 length 76 (0) EAP-Message = 0x010200123731000000080001000431323334 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0xc2f31397c2f12456155e1115101ee725 (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 251 from 10.78.1.215:1645 to 10.78.5.223:1645 length 415 (1) User-Name = "anon" (1) Service-Type = Framed-User (1) Cisco-AVPair = "service-type=Framed" (1) Framed-MTU = 1500 (1) Called-Station-Id = "00-3C-10-AB-A2-8A" (1) Calling-Station-Id = "C8-F7-50-08-DD-9F" (1) EAP-Message = 0x020200a237011603030097010000930303674f1c7662d8fa64f27b9e2cc0d547ad68bb771ba71506870ff8676257b63608000024c02cc02bc030c02fc024c023c028c027c00ac009c014c013009d009c003d003c0035002f01000046000500050100000000000a00080006001d00170018000b00020100000d001a00180804080508060401050102010403050302030202060106030023000000170000ff01000100 (1) Message-Authenticator = 0xd701fed7d2c902f23b5c188c623218cb (1) Cisco-AVPair = "audit-session-id=0A4E01D7000006B823D3132B" (1) Cisco-AVPair = "method=dot1x" (1) NAS-IP-Address = 10.78.1.215 (1) NAS-Port-Id = "GigabitEthernet1/0/10" (1) NAS-Port-Type = Ethernet (1) NAS-Port = 50110 (1) State = 0xc2f31397c2f12456155e1115101ee725 (1) Restoring &session-state (1) &session-state:Framed-MTU = 984 (1) # Executing section authorize from file /etc/raddb/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /(a)\./) { (1) if (&User-Name =~ /(a)\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "anon", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 2 length 162 (1) eap: Continuing tunnel setup (1) [eap] = ok (1) } # authorize = ok (1) Found Auth-Type = eap (1) # Executing group from file /etc/raddb/sites-enabled/default (1) Auth-Type eap { (1) eap: Removing EAP session with state 0xc2f31397c2f12456 (1) eap: Previous EAP request found for state 0xc2f31397c2f12456, released from the list (1) eap: Peer sent packet with method EAP TEAP (55) (1) eap: Calling submodule eap_teap to process data (1) eap_teap: Authenticate (1) eap_teap: (TLS) EAP Got final fragment (156 bytes) (1) eap_teap: WARNING: (TLS) EAP Total received record fragments (156 bytes), does not equal expected expected data length (0 bytes) (1) eap_teap: (TLS) EAP Done initial handshake (1) eap_teap: (TLS) TEAP - Handshake state - before SSL initialization (1) eap_teap: (TLS) TEAP - Handshake state - Server before SSL initialization (1) eap_teap: (TLS) TEAP - Handshake state - Server before SSL initialization (1) eap_teap: (TLS) TEAP - recv TLS 1.3 Handshake, ClientHello (1) eap_teap: (TLS) TEAP - Handshake state - Server SSLv3/TLS read client hello (1) eap_teap: (TLS) TEAP - send TLS 1.2 Handshake, ServerHello (1) eap_teap: (TLS) TEAP - Handshake state - Server SSLv3/TLS write server hello (1) eap_teap: (TLS) TEAP - send TLS 1.2 Handshake, Certificate (1) eap_teap: (TLS) TEAP - Handshake state - Server SSLv3/TLS write certificate (1) eap_teap: (TLS) TEAP - send TLS 1.2 Handshake, ServerKeyExchange (1) eap_teap: (TLS) TEAP - Handshake state - Server SSLv3/TLS write key exchange (1) eap_teap: (TLS) TEAP - send TLS 1.2 Handshake, ServerHelloDone (1) eap_teap: (TLS) TEAP - Handshake state - Server SSLv3/TLS write server done (1) eap_teap: (TLS) TEAP - Server : Need to read more data: SSLv3/TLS write server done (1) eap_teap: (TLS) TEAP - In Handshake Phase (1) eap: Sending EAP Request (code 1) ID 3 length 994 (1) eap: EAP session adding &reply:State = 0xc2f31397c3f02456 (1) [eap] = handled (1) if (handled && (Response-Packet-Type == Access-Challenge)) { (1) EXPAND Response-Packet-Type (1) --> Access-Challenge (1) if (handled && (Response-Packet-Type == Access-Challenge)) -> TRUE (1) if (handled && (Response-Packet-Type == Access-Challenge)) { (1) attr_filter.access_challenge: EXPAND %{User-Name} (1) attr_filter.access_challenge: --> anon (1) attr_filter.access_challenge: Matched entry DEFAULT at line 12 (1) [attr_filter.access_challenge.post-auth] = updated (1) [handled] = handled (1) } # if (handled && (Response-Packet-Type == Access-Challenge)) = handled (1) } # Auth-Type eap = handled (1) Using Post-Auth-Type Challenge (1) # Executing group from file /etc/raddb/sites-enabled/default (1) Challenge { ... } # empty sub-section is ignored (1) session-state: Saving cached attributes (1) Framed-MTU = 984 (1) TLS-Session-Information = "(TLS) TEAP - recv TLS 1.3 Handshake, ClientHello" (1) TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerHello" (1) TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, Certificate" (1) TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerKeyExchange" (1) TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerHelloDone" (1) Sent Access-Challenge Id 251 from 10.78.5.223:1645 to 10.78.1.215:1645 length 1058 (1) EAP-Message = 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 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0xc2f31397c3f02456155e1115101ee725 (1) Finished request Waking up in 4.9 seconds. (2) Received Access-Request Id 252 from 10.78.1.215:1645 to 10.78.5.223:1645 length 259 (2) User-Name = "anon" (2) Service-Type = Framed-User (2) Cisco-AVPair = "service-type=Framed" (2) Framed-MTU = 1500 (2) Called-Station-Id = "00-3C-10-AB-A2-8A" (2) Calling-Station-Id = "C8-F7-50-08-DD-9F" (2) EAP-Message = 0x020300063701 (2) Message-Authenticator = 0xc08d3f4b1960dd89171d8d34e5699343 (2) Cisco-AVPair = "audit-session-id=0A4E01D7000006B823D3132B" (2) Cisco-AVPair = "method=dot1x" (2) NAS-IP-Address = 10.78.1.215 (2) NAS-Port-Id = "GigabitEthernet1/0/10" (2) NAS-Port-Type = Ethernet (2) NAS-Port = 50110 (2) State = 0xc2f31397c3f02456155e1115101ee725 (2) Restoring &session-state (2) &session-state:Framed-MTU = 984 (2) &session-state:TLS-Session-Information = "(TLS) TEAP - recv TLS 1.3 Handshake, ClientHello" (2) &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerHello" (2) &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, Certificate" (2) &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerKeyExchange" (2) &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerHelloDone" (2) # Executing section authorize from file /etc/raddb/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /(a)\./) { (2) if (&User-Name =~ /(a)\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "anon", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 3 length 6 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = eap (2) # Executing group from file /etc/raddb/sites-enabled/default (2) Auth-Type eap { (2) eap: Removing EAP session with state 0xc2f31397c3f02456 (2) eap: Previous EAP request found for state 0xc2f31397c3f02456, released from the list (2) eap: Peer sent packet with method EAP TEAP (55) (2) eap: Calling submodule eap_teap to process data (2) eap_teap: Authenticate (2) eap_teap: (TLS) Peer ACKed our handshake fragment (2) eap: Sending EAP Request (code 1) ID 4 length 990 (2) eap: EAP session adding &reply:State = 0xc2f31397c0f72456 (2) [eap] = handled (2) if (handled && (Response-Packet-Type == Access-Challenge)) { (2) EXPAND Response-Packet-Type (2) --> Access-Challenge (2) if (handled && (Response-Packet-Type == Access-Challenge)) -> TRUE (2) if (handled && (Response-Packet-Type == Access-Challenge)) { (2) attr_filter.access_challenge: EXPAND %{User-Name} (2) attr_filter.access_challenge: --> anon (2) attr_filter.access_challenge: Matched entry DEFAULT at line 12 (2) [attr_filter.access_challenge.post-auth] = updated (2) [handled] = handled (2) } # if (handled && (Response-Packet-Type == Access-Challenge)) = handled (2) } # Auth-Type eap = handled (2) Using Post-Auth-Type Challenge (2) # Executing group from file /etc/raddb/sites-enabled/default (2) Challenge { ... } # empty sub-section is ignored (2) session-state: Saving cached attributes (2) Framed-MTU = 984 (2) TLS-Session-Information = "(TLS) TEAP - recv TLS 1.3 Handshake, ClientHello" (2) TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerHello" (2) TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, Certificate" (2) TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerKeyExchange" (2) TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerHelloDone" (2) Sent Access-Challenge Id 252 from 10.78.5.223:1645 to 10.78.1.215:1645 length 1054 (2) EAP-Message = 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 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0xc2f31397c0f72456155e1115101ee725 (2) Finished request Waking up in 4.9 seconds. (3) Received Access-Request Id 253 from 10.78.1.215:1645 to 10.78.5.223:1645 length 259 (3) User-Name = "anon" (3) Service-Type = Framed-User (3) Cisco-AVPair = "service-type=Framed" (3) Framed-MTU = 1500 (3) Called-Station-Id = "00-3C-10-AB-A2-8A" (3) Calling-Station-Id = "C8-F7-50-08-DD-9F" (3) EAP-Message = 0x020400063701 (3) Message-Authenticator = 0x2d4751c8d565a5c5f245b6c2d096b795 (3) Cisco-AVPair = "audit-session-id=0A4E01D7000006B823D3132B" (3) Cisco-AVPair = "method=dot1x" (3) NAS-IP-Address = 10.78.1.215 (3) NAS-Port-Id = "GigabitEthernet1/0/10" (3) NAS-Port-Type = Ethernet (3) NAS-Port = 50110 (3) State = 0xc2f31397c0f72456155e1115101ee725 (3) Restoring &session-state (3) &session-state:Framed-MTU = 984 (3) &session-state:TLS-Session-Information = "(TLS) TEAP - recv TLS 1.3 Handshake, ClientHello" (3) &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerHello" (3) &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, Certificate" (3) &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerKeyExchange" (3) &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerHelloDone" (3) # Executing section authorize from file /etc/raddb/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /(a)\./) { (3) if (&User-Name =~ /(a)\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "anon", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 4 length 6 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /etc/raddb/sites-enabled/default (3) Auth-Type eap { (3) eap: Removing EAP session with state 0xc2f31397c0f72456 (3) eap: Previous EAP request found for state 0xc2f31397c0f72456, released from the list (3) eap: Peer sent packet with method EAP TEAP (55) (3) eap: Calling submodule eap_teap to process data (3) eap_teap: Authenticate (3) eap_teap: (TLS) Peer ACKed our handshake fragment (3) eap: Sending EAP Request (code 1) ID 5 length 459 (3) eap: EAP session adding &reply:State = 0xc2f31397c1f62456 (3) [eap] = handled (3) if (handled && (Response-Packet-Type == Access-Challenge)) { (3) EXPAND Response-Packet-Type (3) --> Access-Challenge (3) if (handled && (Response-Packet-Type == Access-Challenge)) -> TRUE (3) if (handled && (Response-Packet-Type == Access-Challenge)) { (3) attr_filter.access_challenge: EXPAND %{User-Name} (3) attr_filter.access_challenge: --> anon (3) attr_filter.access_challenge: Matched entry DEFAULT at line 12 (3) [attr_filter.access_challenge.post-auth] = updated (3) [handled] = handled (3) } # if (handled && (Response-Packet-Type == Access-Challenge)) = handled (3) } # Auth-Type eap = handled (3) Using Post-Auth-Type Challenge (3) # Executing group from file /etc/raddb/sites-enabled/default (3) Challenge { ... } # empty sub-section is ignored (3) session-state: Saving cached attributes (3) Framed-MTU = 984 (3) TLS-Session-Information = "(TLS) TEAP - recv TLS 1.3 Handshake, ClientHello" (3) TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerHello" (3) TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, Certificate" (3) TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerKeyExchange" (3) TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerHelloDone" (3) Sent Access-Challenge Id 253 from 10.78.5.223:1645 to 10.78.1.215:1645 length 519 (3) EAP-Message = 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 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0xc2f31397c1f62456155e1115101ee725 (3) Finished request Waking up in 4.8 seconds. (4) Received Access-Request Id 254 from 10.78.1.215:1645 to 10.78.5.223:1645 length 352 (4) User-Name = "anon" (4) Service-Type = Framed-User (4) Cisco-AVPair = "service-type=Framed" (4) Framed-MTU = 1500 (4) Called-Station-Id = "00-3C-10-AB-A2-8A" (4) Calling-Station-Id = "C8-F7-50-08-DD-9F" (4) EAP-Message = 0x0205006337011603030025100000212053b0801a7f676c92e3eb655f69ed76b1874c1b9b701a10d914e6c3d072424b381403030001011603030028000000000000000076a5db27353eeb43cf72dfb4a1b3ac38d94362e5b06205a04eacb335cb8cb240 (4) Message-Authenticator = 0xf53413f9d6d7483b36ff152e6cbb77aa (4) Cisco-AVPair = "audit-session-id=0A4E01D7000006B823D3132B" (4) Cisco-AVPair = "method=dot1x" (4) NAS-IP-Address = 10.78.1.215 (4) NAS-Port-Id = "GigabitEthernet1/0/10" (4) NAS-Port-Type = Ethernet (4) NAS-Port = 50110 (4) State = 0xc2f31397c1f62456155e1115101ee725 (4) Restoring &session-state (4) &session-state:Framed-MTU = 984 (4) &session-state:TLS-Session-Information = "(TLS) TEAP - recv TLS 1.3 Handshake, ClientHello" (4) &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerHello" (4) &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, Certificate" (4) &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerKeyExchange" (4) &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerHelloDone" (4) # Executing section authorize from file /etc/raddb/sites-enabled/default (4) authorize { (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /(a)\./) { (4) if (&User-Name =~ /(a)\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "anon", looking up realm NULL (4) suffix: No such realm "NULL" (4) [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 5 length 99 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /etc/raddb/sites-enabled/default (4) Auth-Type eap { (4) eap: Removing EAP session with state 0xc2f31397c1f62456 (4) eap: Previous EAP request found for state 0xc2f31397c1f62456, released from the list (4) eap: Peer sent packet with method EAP TEAP (55) (4) eap: Calling submodule eap_teap to process data (4) eap_teap: Authenticate (4) eap_teap: (TLS) EAP Done initial handshake (4) eap_teap: (TLS) TEAP - Handshake state - Server SSLv3/TLS write server done (4) eap_teap: (TLS) TEAP - recv TLS 1.2 Handshake, ClientKeyExchange (4) eap_teap: (TLS) TEAP - Handshake state - Server SSLv3/TLS read client key exchange (4) eap_teap: (TLS) TEAP - Handshake state - Server SSLv3/TLS read change cipher spec (4) eap_teap: (TLS) TEAP - recv TLS 1.2 Handshake, Finished (4) eap_teap: (TLS) TEAP - Handshake state - Server SSLv3/TLS read finished (4) eap_teap: (TLS) TEAP - send TLS 1.2 ChangeCipherSpec (4) eap_teap: (TLS) TEAP - Handshake state - Server SSLv3/TLS write change cipher spec (4) eap_teap: (TLS) TEAP - send TLS 1.2 Handshake, Finished (4) eap_teap: (TLS) TEAP - Handshake state - Server SSLv3/TLS write finished (4) eap_teap: (TLS) TEAP - Handshake state - SSL negotiation finished successfully (4) eap_teap: (TLS) TEAP - Connection Established (4) eap_teap: TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (4) eap_teap: TLS-Session-Version = "TLS 1.2" (4) eap: Sending EAP Request (code 1) ID 6 length 57 (4) eap: EAP session adding &reply:State = 0xc2f31397c6f52456 (4) [eap] = handled (4) if (handled && (Response-Packet-Type == Access-Challenge)) { (4) EXPAND Response-Packet-Type (4) --> Access-Challenge (4) if (handled && (Response-Packet-Type == Access-Challenge)) -> TRUE (4) if (handled && (Response-Packet-Type == Access-Challenge)) { (4) attr_filter.access_challenge: EXPAND %{User-Name} (4) attr_filter.access_challenge: --> anon (4) attr_filter.access_challenge: Matched entry DEFAULT at line 12 (4) [attr_filter.access_challenge.post-auth] = updated (4) [handled] = handled (4) } # if (handled && (Response-Packet-Type == Access-Challenge)) = handled (4) } # Auth-Type eap = handled (4) Using Post-Auth-Type Challenge (4) # Executing group from file /etc/raddb/sites-enabled/default (4) Challenge { ... } # empty sub-section is ignored (4) session-state: Saving cached attributes (4) Framed-MTU = 984 (4) TLS-Session-Information = "(TLS) TEAP - recv TLS 1.3 Handshake, ClientHello" (4) TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerHello" (4) TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, Certificate" (4) TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerKeyExchange" (4) TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerHelloDone" (4) TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2 Handshake, ClientKeyExchange" (4) TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2 Handshake, Finished" (4) TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 ChangeCipherSpec" (4) TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, Finished" (4) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (4) TLS-Session-Version = "TLS 1.2" (4) Sent Access-Challenge Id 254 from 10.78.5.223:1645 to 10.78.1.215:1645 length 115 (4) EAP-Message = 0x0106003937011403030001011603030028d58e097e35b6433e3eb729fb53a5947c1cf21fadf5526769e05b344ab33a4d126b8c7f21a13255bf (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0xc2f31397c6f52456155e1115101ee725 (4) Finished request Waking up in 4.8 seconds. (5) Received Access-Request Id 255 from 10.78.1.215:1645 to 10.78.5.223:1645 length 259 (5) User-Name = "anon" (5) Service-Type = Framed-User (5) Cisco-AVPair = "service-type=Framed" (5) Framed-MTU = 1500 (5) Called-Station-Id = "00-3C-10-AB-A2-8A" (5) Calling-Station-Id = "C8-F7-50-08-DD-9F" (5) EAP-Message = 0x020600063701 (5) Message-Authenticator = 0xfa0b193d43d16e8dc2484de99e752bbe (5) Cisco-AVPair = "audit-session-id=0A4E01D7000006B823D3132B" (5) Cisco-AVPair = "method=dot1x" (5) NAS-IP-Address = 10.78.1.215 (5) NAS-Port-Id = "GigabitEthernet1/0/10" (5) NAS-Port-Type = Ethernet (5) NAS-Port = 50110 (5) State = 0xc2f31397c6f52456155e1115101ee725 (5) Restoring &session-state (5) &session-state:Framed-MTU = 984 (5) &session-state:TLS-Session-Information = "(TLS) TEAP - recv TLS 1.3 Handshake, ClientHello" (5) &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerHello" (5) &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, Certificate" (5) &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerKeyExchange" (5) &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerHelloDone" (5) &session-state:TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2 Handshake, ClientKeyExchange" (5) &session-state:TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2 Handshake, Finished" (5) &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 ChangeCipherSpec" (5) &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, Finished" (5) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (5) &session-state:TLS-Session-Version = "TLS 1.2" (5) # Executing section authorize from file /etc/raddb/sites-enabled/default (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /(a)\./) { (5) if (&User-Name =~ /(a)\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) [chap] = noop (5) [mschap] = noop (5) [digest] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "anon", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) eap: Peer sent EAP Response (code 2) ID 6 length 6 (5) eap: Continuing tunnel setup (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /etc/raddb/sites-enabled/default (5) Auth-Type eap { (5) eap: Removing EAP session with state 0xc2f31397c6f52456 (5) eap: Previous EAP request found for state 0xc2f31397c6f52456, released from the list (5) eap: Peer sent packet with method EAP TEAP (55) (5) eap: Calling submodule eap_teap to process data (5) eap_teap: Authenticate (5) eap_teap: (TLS) Peer ACKed our handshake fragment. handshake is finished (5) eap_teap: Session established. Proceeding to decode tunneled attributes (5) eap_teap: Using authenticated provisioning (5) eap_teap: Using MAC SHA384 (673) (5) eap_teap: Deriving EAP-TEAP keys (5) eap_teap: S-IMCK[0] - hexdump(len=40): 0a fb ff 6d 28 ed 5f 83 f2 70 ef d7 c5 27 b4 d9 b0 2f 9f 88 36 bf c2 ef 04 96 d4 c1 fb bb a8 59 9c 28 e0 d0 5e 3a 3d f9 (5) eap_teap: Sending EAP-Identity (5) eap: Sending EAP Request (code 1) ID 7 length 44 (5) eap: EAP session adding &reply:State = 0xc2f31397c7f42456 (5) [eap] = handled (5) if (handled && (Response-Packet-Type == Access-Challenge)) { (5) EXPAND Response-Packet-Type (5) --> Access-Challenge (5) if (handled && (Response-Packet-Type == Access-Challenge)) -> TRUE (5) if (handled && (Response-Packet-Type == Access-Challenge)) { (5) attr_filter.access_challenge: EXPAND %{User-Name} (5) attr_filter.access_challenge: --> anon (5) attr_filter.access_challenge: Matched entry DEFAULT at line 12 (5) [attr_filter.access_challenge.post-auth] = updated (5) [handled] = handled (5) } # if (handled && (Response-Packet-Type == Access-Challenge)) = handled (5) } # Auth-Type eap = handled (5) Using Post-Auth-Type Challenge (5) # Executing group from file /etc/raddb/sites-enabled/default (5) Challenge { ... } # empty sub-section is ignored (5) session-state: Saving cached attributes (5) Framed-MTU = 984 (5) TLS-Session-Information = "(TLS) TEAP - recv TLS 1.3 Handshake, ClientHello" (5) TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerHello" (5) TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, Certificate" (5) TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerKeyExchange" (5) TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerHelloDone" (5) TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2 Handshake, ClientKeyExchange" (5) TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2 Handshake, Finished" (5) TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 ChangeCipherSpec" (5) TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, Finished" (5) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (5) TLS-Session-Version = "TLS 1.2" (5) Sent Access-Challenge Id 255 from 10.78.5.223:1645 to 10.78.1.215:1645 length 102 (5) EAP-Message = 0x0107002c37011703030021d58e097e35b6433f20cc6502c27d43f27f0a30ff70fe8d564eef8f2e9e2b0ded87 (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0xc2f31397c7f42456155e1115101ee725 (5) Finished request Waking up in 4.8 seconds. (6) Received Access-Request Id 0 from 10.78.1.215:1645 to 10.78.5.223:1645 length 320 (6) User-Name = "anon" (6) Service-Type = Framed-User (6) Cisco-AVPair = "service-type=Framed" (6) Framed-MTU = 1500 (6) Called-Station-Id = "00-3C-10-AB-A2-8A" (6) Calling-Station-Id = "C8-F7-50-08-DD-9F" (6) EAP-Message = 0x020700433701170303003800000000000000019462c48dc921395b9b63a389f600d40431b30bb47a156b065a7d6f1cc86d797008c62ac2f7cb0c725bfe2aab9f23e0f8 (6) Message-Authenticator = 0x6de6bf531e1be8f17d18d321c35b54ce (6) Cisco-AVPair = "audit-session-id=0A4E01D7000006B823D3132B" (6) Cisco-AVPair = "method=dot1x" (6) NAS-IP-Address = 10.78.1.215 (6) NAS-Port-Id = "GigabitEthernet1/0/10" (6) NAS-Port-Type = Ethernet (6) NAS-Port = 50110 (6) State = 0xc2f31397c7f42456155e1115101ee725 (6) Restoring &session-state (6) &session-state:Framed-MTU = 984 (6) &session-state:TLS-Session-Information = "(TLS) TEAP - recv TLS 1.3 Handshake, ClientHello" (6) &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerHello" (6) &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, Certificate" (6) &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerKeyExchange" (6) &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerHelloDone" (6) &session-state:TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2 Handshake, ClientKeyExchange" (6) &session-state:TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2 Handshake, Finished" (6) &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 ChangeCipherSpec" (6) &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, Finished" (6) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (6) &session-state:TLS-Session-Version = "TLS 1.2" (6) # Executing section authorize from file /etc/raddb/sites-enabled/default (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /(a)\./) { (6) if (&User-Name =~ /(a)\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [preprocess] = ok (6) [chap] = noop (6) [mschap] = noop (6) [digest] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "anon", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) eap: Peer sent EAP Response (code 2) ID 7 length 67 (6) eap: Continuing tunnel setup (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /etc/raddb/sites-enabled/default (6) Auth-Type eap { (6) eap: Removing EAP session with state 0xc2f31397c7f42456 (6) eap: Previous EAP request found for state 0xc2f31397c7f42456, released from the list (6) eap: Peer sent packet with method EAP TEAP (55) (6) eap: Calling submodule eap_teap to process data (6) eap_teap: Authenticate (6) eap_teap: (TLS) EAP Done initial handshake (6) eap_teap: Session established. Proceeding to decode tunneled attributes (6) eap_teap: Got Tunneled TEAP TLVs (6) eap_teap: FreeRADIUS-EAP-TEAP-EAP-Payload = 0x0207001c016d617274696e2d746573742d636c69656e742d63657274 (6) eap_teap: Processing received EAP Payload (6) eap_teap: Got tunneled request (6) eap_teap: EAP-Message = 0x0207001c016d617274696e2d746573742d636c69656e742d63657274 (6) eap_teap: Got tunneled identity of martin-test-client-cert (6) eap_teap: AUTHENTICATION (6) Virtual server inner-tunnel received request (6) EAP-Message = 0x0207001c016d617274696e2d746573742d636c69656e742d63657274 (6) FreeRADIUS-Proxied-To = 127.0.0.1 (6) User-Name = "martin-test-client-cert" (6) WARNING: Outer User-Name is not anonymized. User privacy is compromised. (6) server inner-tunnel { (6) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /(a)\./) { (6) if (&User-Name =~ /(a)\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [chap] = noop (6) [mschap] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "martin-test-client-cert", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) update control { (6) &Proxy-To-Realm := LOCAL (6) } # update control = noop (6) inner-eap: Peer sent EAP Response (code 2) ID 7 length 28 (6) inner-eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (6) [inner-eap] = ok (6) } # authorize = ok (6) WARNING: You set Proxy-To-Realm = LOCAL, but the realm does not exist! Cancelling invalid proxy request. (6) Found Auth-Type = inner-eap (6) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (6) Auth-Type inner-eap { (6) inner-eap: Peer sent packet with method EAP Identity (1) (6) inner-eap: Calling submodule eap_tls to process data (6) eap_tls: (TLS) TLS -Initiating new session (6) eap_tls: (TLS) TLS - Setting verify mode to require certificate from client (6) inner-eap: Sending EAP Request (code 1) ID 8 length 10 (6) inner-eap: EAP session adding &reply:State = 0x7d82a9617d8aa413 (6) [inner-eap] = handled (6) } # Auth-Type inner-eap = handled (6) Using Post-Auth-Type Challenge (6) Post-Auth-Type sub-section not found. Ignoring. (6) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (6) session-state: Saving cached attributes (6) Framed-MTU = 921 (6) } # server inner-tunnel (6) Virtual server sending reply (6) EAP-Message = 0x0108000a0da000000000 (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0x7d82a9617d8aa413afebab08aa0725a8 (6) eap_teap: Got tunneled Access-Challenge (6) eap: Sending EAP Request (code 1) ID 8 length 49 (6) eap: EAP session adding &reply:State = 0xc2f31397c4fb2456 (6) [eap] = handled (6) if (handled && (Response-Packet-Type == Access-Challenge)) { (6) EXPAND Response-Packet-Type (6) --> Access-Challenge (6) if (handled && (Response-Packet-Type == Access-Challenge)) -> TRUE (6) if (handled && (Response-Packet-Type == Access-Challenge)) { (6) attr_filter.access_challenge: EXPAND %{User-Name} (6) attr_filter.access_challenge: --> anon (6) attr_filter.access_challenge: Matched entry DEFAULT at line 12 (6) [attr_filter.access_challenge.post-auth] = updated (6) [handled] = handled (6) } # if (handled && (Response-Packet-Type == Access-Challenge)) = handled (6) } # Auth-Type eap = handled (6) Using Post-Auth-Type Challenge (6) # Executing group from file /etc/raddb/sites-enabled/default (6) Challenge { ... } # empty sub-section is ignored (6) session-state: Saving cached attributes (6) Framed-MTU = 984 (6) TLS-Session-Information = "(TLS) TEAP - recv TLS 1.3 Handshake, ClientHello" (6) TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerHello" (6) TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, Certificate" (6) TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerKeyExchange" (6) TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerHelloDone" (6) TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2 Handshake, ClientKeyExchange" (6) TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2 Handshake, Finished" (6) TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 ChangeCipherSpec" (6) TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, Finished" (6) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (6) TLS-Session-Version = "TLS 1.2" (6) Sent Access-Challenge Id 0 from 10.78.5.223:1645 to 10.78.1.215:1645 length 107 (6) EAP-Message = 0x0108003137011703030026d58e097e35b64340c63c7e2b1c1afb074cc6f80935636bb23216c639cb1be316fa0442220db1 (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0xc2f31397c4fb2456155e1115101ee725 (6) Finished request Waking up in 3.6 seconds. (7) Received Access-Request Id 1 from 10.78.1.215:1645 to 10.78.5.223:1645 length 561 (7) User-Name = "anon" (7) Service-Type = Framed-User (7) Cisco-AVPair = "service-type=Framed" (7) Framed-MTU = 1500 (7) Called-Station-Id = "00-3C-10-AB-A2-8A" (7) Calling-Station-Id = "C8-F7-50-08-DD-9F" (7) EAP-Message = 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 (7) Message-Authenticator = 0xf42573b74775036a509442421edcfa15 (7) Cisco-AVPair = "audit-session-id=0A4E01D7000006B823D3132B" (7) Cisco-AVPair = "method=dot1x" (7) NAS-IP-Address = 10.78.1.215 (7) NAS-Port-Id = "GigabitEthernet1/0/10" (7) NAS-Port-Type = Ethernet (7) NAS-Port = 50110 (7) State = 0xc2f31397c4fb2456155e1115101ee725 (7) Restoring &session-state (7) &session-state:Framed-MTU = 984 (7) &session-state:TLS-Session-Information = "(TLS) TEAP - recv TLS 1.3 Handshake, ClientHello" (7) &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerHello" (7) &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, Certificate" (7) &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerKeyExchange" (7) &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerHelloDone" (7) &session-state:TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2 Handshake, ClientKeyExchange" (7) &session-state:TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2 Handshake, Finished" (7) &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 ChangeCipherSpec" (7) &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, Finished" (7) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (7) &session-state:TLS-Session-Version = "TLS 1.2" (7) # Executing section authorize from file /etc/raddb/sites-enabled/default (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /(a)\./) { (7) if (&User-Name =~ /(a)\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [preprocess] = ok (7) [chap] = noop (7) [mschap] = noop (7) [digest] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "anon", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) eap: Peer sent EAP Response (code 2) ID 8 length 306 (7) eap: Continuing tunnel setup (7) [eap] = ok (7) } # authorize = ok (7) Found Auth-Type = eap (7) # Executing group from file /etc/raddb/sites-enabled/default (7) Auth-Type eap { (7) eap: Removing EAP session with state 0xc2f31397c4fb2456 (7) eap: Previous EAP request found for state 0xc2f31397c4fb2456, released from the list (7) eap: Peer sent packet with method EAP TEAP (55) (7) eap: Calling submodule eap_teap to process data (7) eap_teap: Authenticate (7) eap_teap: (TLS) EAP Done initial handshake (7) eap_teap: Session established. Proceeding to decode tunneled attributes (7) eap_teap: Got Tunneled TEAP TLVs (7) eap_teap: FreeRADIUS-EAP-TEAP-EAP-Payload = 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 (7) eap_teap: Processing received EAP Payload (7) eap_teap: Got tunneled request (7) eap_teap: EAP-Message = 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 (7) eap_teap: AUTHENTICATION (7) Virtual server inner-tunnel received request (7) EAP-Message = 0x0208010b0d800000010116030100fc010000f80303894df71571b44caa45ce419e7802bc2f64696a756113459d3036ed36abbf8be820ffd8e8fd16d3ec99a12eb2565caaa1d5957d005fd5e4214d3bc872b7f3a422a6002813021301c02cc02bc030c02fc024c023c028c027c00ac009c014c013009d009c003d003c0035002f01000087000500050100000000002b0009080304030303020301000d001a001808040805080604010501020104030503020302020601060300230000000a00080006001d00170018000b00020100003300260024001d0020f47d02c057a0290501142c7da714697cfd243b353d7de5ed8e6a77694cb0ce360031000000170000ff01000100002d00020101 (7) FreeRADIUS-Proxied-To = 127.0.0.1 (7) User-Name = "martin-test-client-cert" (7) State = 0x7d82a9617d8aa413afebab08aa0725a8 (7) WARNING: Outer User-Name is not anonymized. User privacy is compromised. (7) server inner-tunnel { (7) Restoring &session-state (7) &session-state:Framed-MTU = 921 (7) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /(a)\./) { (7) if (&User-Name =~ /(a)\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [chap] = noop (7) [mschap] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "martin-test-client-cert", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) update control { (7) &Proxy-To-Realm := LOCAL (7) } # update control = noop (7) inner-eap: Peer sent EAP Response (code 2) ID 8 length 267 (7) inner-eap: No EAP Start, assuming it's an on-going EAP conversation (7) [inner-eap] = updated (7) [files] = noop (7) [expiration] = noop (7) [logintime] = noop (7) [pap] = noop (7) } # authorize = updated (7) WARNING: You set Proxy-To-Realm = LOCAL, but the realm does not exist! Cancelling invalid proxy request. (7) Found Auth-Type = inner-eap (7) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (7) Auth-Type inner-eap { (7) inner-eap: Removing EAP session with state 0x7d82a9617d8aa413 (7) inner-eap: Previous EAP request found for state 0x7d82a9617d8aa413, released from the list (7) inner-eap: Peer sent packet with method EAP TLS (13) (7) inner-eap: Calling submodule eap_tls to process data (7) eap_tls: (TLS) EAP Peer says that the final record size will be 257 bytes (7) eap_tls: (TLS) EAP Got all data (257 bytes) (7) eap_tls: (TLS) TLS - Handshake state - before SSL initialization (7) eap_tls: (TLS) TLS - Handshake state - Server before SSL initialization (7) eap_tls: (TLS) TLS - Handshake state - Server before SSL initialization (7) eap_tls: (TLS) TLS - recv TLS 1.3 Handshake, ClientHello (7) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS read client hello (7) eap_tls: (TLS) TLS - send TLS 1.2 Handshake, ServerHello (7) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write server hello (7) eap_tls: (TLS) TLS - send TLS 1.2 Handshake, Certificate (7) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write certificate (7) eap_tls: (TLS) TLS - send TLS 1.2 Handshake, ServerKeyExchange (7) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write key exchange (7) eap_tls: (TLS) TLS - send TLS 1.2 Handshake, CertificateRequest (7) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write certificate request (7) eap_tls: (TLS) TLS - send TLS 1.2 Handshake, ServerHelloDone (7) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write server done (7) eap_tls: (TLS) TLS - Server : Need to read more data: SSLv3/TLS write server done (7) eap_tls: (TLS) TLS - In Handshake Phase (7) inner-eap: Sending EAP Request (code 1) ID 9 length 927 (7) inner-eap: EAP session adding &reply:State = 0x7d82a9617c8ba413 (7) [inner-eap] = handled (7) } # Auth-Type inner-eap = handled (7) Using Post-Auth-Type Challenge (7) Post-Auth-Type sub-section not found. Ignoring. (7) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (7) session-state: Saving cached attributes (7) Framed-MTU = 921 (7) TLS-Session-Information = "(TLS) TLS - recv TLS 1.3 Handshake, ClientHello" (7) TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake, ServerHello" (7) TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake, Certificate" (7) TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake, ServerKeyExchange" (7) TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake, CertificateRequest" (7) TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake, ServerHelloDone" (7) } # server inner-tunnel (7) Virtual server sending reply (7) EAP-Message = 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 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0x7d82a9617c8ba413afebab08aa0725a8 (7) eap_teap: Got tunneled Access-Challenge (7) eap: Sending EAP Request (code 1) ID 9 length 966 (7) eap: EAP session adding &reply:State = 0xc2f31397c5fa2456 (7) [eap] = handled (7) if (handled && (Response-Packet-Type == Access-Challenge)) { (7) EXPAND Response-Packet-Type (7) --> Access-Challenge (7) if (handled && (Response-Packet-Type == Access-Challenge)) -> TRUE (7) if (handled && (Response-Packet-Type == Access-Challenge)) { (7) attr_filter.access_challenge: EXPAND %{User-Name} (7) attr_filter.access_challenge: --> anon (7) attr_filter.access_challenge: Matched entry DEFAULT at line 12 (7) [attr_filter.access_challenge.post-auth] = updated (7) [handled] = handled (7) } # if (handled && (Response-Packet-Type == Access-Challenge)) = handled (7) } # Auth-Type eap = handled (7) Using Post-Auth-Type Challenge (7) # Executing group from file /etc/raddb/sites-enabled/default (7) Challenge { ... } # empty sub-section is ignored (7) session-state: Saving cached attributes (7) Framed-MTU = 984 (7) TLS-Session-Information = "(TLS) TEAP - recv TLS 1.3 Handshake, ClientHello" (7) TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerHello" (7) TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, Certificate" (7) TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerKeyExchange" (7) TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerHelloDone" (7) TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2 Handshake, ClientKeyExchange" (7) TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2 Handshake, Finished" (7) TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 ChangeCipherSpec" (7) TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, Finished" (7) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (7) TLS-Session-Version = "TLS 1.2" (7) Sent Access-Challenge Id 1 from 10.78.5.223:1645 to 10.78.1.215:1645 length 1030 (7) EAP-Message = 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 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0xc2f31397c5fa2456155e1115101ee725 (7) Finished request Waking up in 2.0 seconds. (8) Received Access-Request Id 2 from 10.78.1.215:1645 to 10.78.5.223:1645 length 298 (8) User-Name = "anon" (8) Service-Type = Framed-User (8) Cisco-AVPair = "service-type=Framed" (8) Framed-MTU = 1500 (8) Called-Station-Id = "00-3C-10-AB-A2-8A" (8) Calling-Station-Id = "C8-F7-50-08-DD-9F" (8) EAP-Message = 0x0209002d370117030300220000000000000003bbf800dad4b2f62f8f8f855deb83a1b84a70060a87c3ae1b13cd (8) Message-Authenticator = 0xd86b117f69facf309edc643a90b77b6a (8) Cisco-AVPair = "audit-session-id=0A4E01D7000006B823D3132B" (8) Cisco-AVPair = "method=dot1x" (8) NAS-IP-Address = 10.78.1.215 (8) NAS-Port-Id = "GigabitEthernet1/0/10" (8) NAS-Port-Type = Ethernet (8) NAS-Port = 50110 (8) State = 0xc2f31397c5fa2456155e1115101ee725 (8) Restoring &session-state (8) &session-state:Framed-MTU = 984 (8) &session-state:TLS-Session-Information = "(TLS) TEAP - recv TLS 1.3 Handshake, ClientHello" (8) &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerHello" (8) &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, Certificate" (8) &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerKeyExchange" (8) &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerHelloDone" (8) &session-state:TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2 Handshake, ClientKeyExchange" (8) &session-state:TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2 Handshake, Finished" (8) &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 ChangeCipherSpec" (8) &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, Finished" (8) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (8) &session-state:TLS-Session-Version = "TLS 1.2" (8) # Executing section authorize from file /etc/raddb/sites-enabled/default (8) authorize { (8) policy filter_username { (8) if (&User-Name) { (8) if (&User-Name) -> TRUE (8) if (&User-Name) { (8) if (&User-Name =~ / /) { (8) if (&User-Name =~ / /) -> FALSE (8) if (&User-Name =~ /@[^@]*@/ ) { (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (8) if (&User-Name =~ /\.\./ ) { (8) if (&User-Name =~ /\.\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\.$/) { (8) if (&User-Name =~ /\.$/) -> FALSE (8) if (&User-Name =~ /(a)\./) { (8) if (&User-Name =~ /(a)\./) -> FALSE (8) } # if (&User-Name) = notfound (8) } # policy filter_username = notfound (8) [preprocess] = ok (8) [chap] = noop (8) [mschap] = noop (8) [digest] = noop (8) suffix: Checking for suffix after "@" (8) suffix: No '@' in User-Name = "anon", looking up realm NULL (8) suffix: No such realm "NULL" (8) [suffix] = noop (8) eap: Peer sent EAP Response (code 2) ID 9 length 45 (8) eap: Continuing tunnel setup (8) [eap] = ok (8) } # authorize = ok (8) Found Auth-Type = eap (8) # Executing group from file /etc/raddb/sites-enabled/default (8) Auth-Type eap { (8) eap: Removing EAP session with state 0xc2f31397c5fa2456 (8) eap: Previous EAP request found for state 0xc2f31397c5fa2456, released from the list (8) eap: Peer sent packet with method EAP TEAP (55) (8) eap: Calling submodule eap_teap to process data (8) eap_teap: Authenticate (8) eap_teap: (TLS) EAP Done initial handshake (8) eap_teap: Session established. Proceeding to decode tunneled attributes (8) eap_teap: Got Tunneled TEAP TLVs (8) eap_teap: FreeRADIUS-EAP-TEAP-EAP-Payload = 0x020900060d00 (8) eap_teap: Processing received EAP Payload (8) eap_teap: Got tunneled request (8) eap_teap: EAP-Message = 0x020900060d00 (8) eap_teap: AUTHENTICATION (8) Virtual server inner-tunnel received request (8) EAP-Message = 0x020900060d00 (8) FreeRADIUS-Proxied-To = 127.0.0.1 (8) User-Name = "martin-test-client-cert" (8) State = 0x7d82a9617c8ba413afebab08aa0725a8 (8) WARNING: Outer User-Name is not anonymized. User privacy is compromised. (8) server inner-tunnel { (8) Restoring &session-state (8) &session-state:Framed-MTU = 921 (8) &session-state:TLS-Session-Information = "(TLS) TLS - recv TLS 1.3 Handshake, ClientHello" (8) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake, ServerHello" (8) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake, Certificate" (8) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake, ServerKeyExchange" (8) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake, CertificateRequest" (8) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake, ServerHelloDone" (8) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel (8) authorize { (8) policy filter_username { (8) if (&User-Name) { (8) if (&User-Name) -> TRUE (8) if (&User-Name) { (8) if (&User-Name =~ / /) { (8) if (&User-Name =~ / /) -> FALSE (8) if (&User-Name =~ /@[^@]*@/ ) { (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (8) if (&User-Name =~ /\.\./ ) { (8) if (&User-Name =~ /\.\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\.$/) { (8) if (&User-Name =~ /\.$/) -> FALSE (8) if (&User-Name =~ /(a)\./) { (8) if (&User-Name =~ /(a)\./) -> FALSE (8) } # if (&User-Name) = notfound (8) } # policy filter_username = notfound (8) [chap] = noop (8) [mschap] = noop (8) suffix: Checking for suffix after "@" (8) suffix: No '@' in User-Name = "martin-test-client-cert", looking up realm NULL (8) suffix: No such realm "NULL" (8) [suffix] = noop (8) update control { (8) &Proxy-To-Realm := LOCAL (8) } # update control = noop (8) inner-eap: Peer sent EAP Response (code 2) ID 9 length 6 (8) inner-eap: No EAP Start, assuming it's an on-going EAP conversation (8) [inner-eap] = updated (8) [files] = noop (8) [expiration] = noop (8) [logintime] = noop (8) [pap] = noop (8) } # authorize = updated (8) WARNING: You set Proxy-To-Realm = LOCAL, but the realm does not exist! Cancelling invalid proxy request. (8) Found Auth-Type = inner-eap (8) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (8) Auth-Type inner-eap { (8) inner-eap: Removing EAP session with state 0x7d82a9617c8ba413 (8) inner-eap: Previous EAP request found for state 0x7d82a9617c8ba413, released from the list (8) inner-eap: Peer sent packet with method EAP TLS (13) (8) inner-eap: Calling submodule eap_tls to process data (8) eap_tls: (TLS) Peer ACKed our handshake fragment (8) inner-eap: Sending EAP Request (code 1) ID 10 length 927 (8) inner-eap: EAP session adding &reply:State = 0x7d82a9617f88a413 (8) [inner-eap] = handled (8) } # Auth-Type inner-eap = handled (8) Using Post-Auth-Type Challenge (8) Post-Auth-Type sub-section not found. Ignoring. (8) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (8) session-state: Saving cached attributes (8) Framed-MTU = 921 (8) TLS-Session-Information = "(TLS) TLS - recv TLS 1.3 Handshake, ClientHello" (8) TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake, ServerHello" (8) TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake, Certificate" (8) TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake, ServerKeyExchange" (8) TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake, CertificateRequest" (8) TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake, ServerHelloDone" (8) } # server inner-tunnel (8) Virtual server sending reply (8) EAP-Message = 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 (8) Message-Authenticator = 0x00000000000000000000000000000000 (8) State = 0x7d82a9617f88a413afebab08aa0725a8 (8) eap_teap: Got tunneled Access-Challenge (8) eap: Sending EAP Request (code 1) ID 10 length 966 (8) eap: EAP session adding &reply:State = 0xc2f31397caf92456 (8) [eap] = handled (8) if (handled && (Response-Packet-Type == Access-Challenge)) { (8) EXPAND Response-Packet-Type (8) --> Access-Challenge (8) if (handled && (Response-Packet-Type == Access-Challenge)) -> TRUE (8) if (handled && (Response-Packet-Type == Access-Challenge)) { (8) attr_filter.access_challenge: EXPAND %{User-Name} (8) attr_filter.access_challenge: --> anon (8) attr_filter.access_challenge: Matched entry DEFAULT at line 12 (8) [attr_filter.access_challenge.post-auth] = updated (8) [handled] = handled (8) } # if (handled && (Response-Packet-Type == Access-Challenge)) = handled (8) } # Auth-Type eap = handled (8) Using Post-Auth-Type Challenge (8) # Executing group from file /etc/raddb/sites-enabled/default (8) Challenge { ... } # empty sub-section is ignored (8) session-state: Saving cached attributes (8) Framed-MTU = 984 (8) TLS-Session-Information = "(TLS) TEAP - recv TLS 1.3 Handshake, ClientHello" (8) TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerHello" (8) TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, Certificate" (8) TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerKeyExchange" (8) TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerHelloDone" (8) TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2 Handshake, ClientKeyExchange" (8) TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2 Handshake, Finished" (8) TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 ChangeCipherSpec" (8) TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, Finished" (8) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (8) TLS-Session-Version = "TLS 1.2" (8) Sent Access-Challenge Id 2 from 10.78.5.223:1645 to 10.78.1.215:1645 length 1030 (8) EAP-Message = 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 (8) Message-Authenticator = 0x00000000000000000000000000000000 (8) State = 0xc2f31397caf92456155e1115101ee725 (8) Finished request Waking up in 0.9 seconds. (0) Cleaning up request packet ID 250 with timestamp +67 due to cleanup_delay was reached (1) Cleaning up request packet ID 251 with timestamp +68 due to cleanup_delay was reached (2) Cleaning up request packet ID 252 with timestamp +68 due to cleanup_delay was reached (3) Cleaning up request packet ID 253 with timestamp +68 due to cleanup_delay was reached (4) Cleaning up request packet ID 254 with timestamp +68 due to cleanup_delay was reached (5) Cleaning up request packet ID 255 with timestamp +68 due to cleanup_delay was reached Waking up in 1.1 seconds. (9) Received Access-Request Id 3 from 10.78.1.215:1645 to 10.78.5.223:1645 length 298 (9) User-Name = "anon" (9) Service-Type = Framed-User (9) Cisco-AVPair = "service-type=Framed" (9) Framed-MTU = 1500 (9) Called-Station-Id = "00-3C-10-AB-A2-8A" (9) Calling-Station-Id = "C8-F7-50-08-DD-9F" (9) EAP-Message = 0x020a002d370117030300220000000000000004f4ccf99d214d0c2fdb9a467cff7fd644578d4142606b87033ab1 (9) Message-Authenticator = 0x2a4c406b109e7aa5f19a03b3c9aaeeff (9) Cisco-AVPair = "audit-session-id=0A4E01D7000006B823D3132B" (9) Cisco-AVPair = "method=dot1x" (9) NAS-IP-Address = 10.78.1.215 (9) NAS-Port-Id = "GigabitEthernet1/0/10" (9) NAS-Port-Type = Ethernet (9) NAS-Port = 50110 (9) State = 0xc2f31397caf92456155e1115101ee725 (9) Restoring &session-state (9) &session-state:Framed-MTU = 984 (9) &session-state:TLS-Session-Information = "(TLS) TEAP - recv TLS 1.3 Handshake, ClientHello" (9) &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerHello" (9) &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, Certificate" (9) &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerKeyExchange" (9) &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerHelloDone" (9) &session-state:TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2 Handshake, ClientKeyExchange" (9) &session-state:TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2 Handshake, Finished" (9) &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 ChangeCipherSpec" (9) &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, Finished" (9) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (9) &session-state:TLS-Session-Version = "TLS 1.2" (9) # Executing section authorize from file /etc/raddb/sites-enabled/default (9) authorize { (9) policy filter_username { (9) if (&User-Name) { (9) if (&User-Name) -> TRUE (9) if (&User-Name) { (9) if (&User-Name =~ / /) { (9) if (&User-Name =~ / /) -> FALSE (9) if (&User-Name =~ /@[^@]*@/ ) { (9) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (9) if (&User-Name =~ /\.\./ ) { (9) if (&User-Name =~ /\.\./ ) -> FALSE (9) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (9) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (9) if (&User-Name =~ /\.$/) { (9) if (&User-Name =~ /\.$/) -> FALSE (9) if (&User-Name =~ /(a)\./) { (9) if (&User-Name =~ /(a)\./) -> FALSE (9) } # if (&User-Name) = notfound (9) } # policy filter_username = notfound (9) [preprocess] = ok (9) [chap] = noop (9) [mschap] = noop (9) [digest] = noop (9) suffix: Checking for suffix after "@" (9) suffix: No '@' in User-Name = "anon", looking up realm NULL (9) suffix: No such realm "NULL" (9) [suffix] = noop (9) eap: Peer sent EAP Response (code 2) ID 10 length 45 (9) eap: Continuing tunnel setup (9) [eap] = ok (9) } # authorize = ok (9) Found Auth-Type = eap (9) # Executing group from file /etc/raddb/sites-enabled/default (9) Auth-Type eap { (9) eap: Removing EAP session with state 0xc2f31397caf92456 (9) eap: Previous EAP request found for state 0xc2f31397caf92456, released from the list (9) eap: Peer sent packet with method EAP TEAP (55) (9) eap: Calling submodule eap_teap to process data (9) eap_teap: Authenticate (9) eap_teap: (TLS) EAP Done initial handshake (9) eap_teap: Session established. Proceeding to decode tunneled attributes (9) eap_teap: Got Tunneled TEAP TLVs (9) eap_teap: FreeRADIUS-EAP-TEAP-EAP-Payload = 0x020a00060d00 (9) eap_teap: Processing received EAP Payload (9) eap_teap: Got tunneled request (9) eap_teap: EAP-Message = 0x020a00060d00 (9) eap_teap: AUTHENTICATION (9) Virtual server inner-tunnel received request (9) EAP-Message = 0x020a00060d00 (9) FreeRADIUS-Proxied-To = 127.0.0.1 (9) User-Name = "martin-test-client-cert" (9) State = 0x7d82a9617f88a413afebab08aa0725a8 (9) WARNING: Outer User-Name is not anonymized. User privacy is compromised. (9) server inner-tunnel { (9) Restoring &session-state (9) &session-state:Framed-MTU = 921 (9) &session-state:TLS-Session-Information = "(TLS) TLS - recv TLS 1.3 Handshake, ClientHello" (9) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake, ServerHello" (9) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake, Certificate" (9) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake, ServerKeyExchange" (9) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake, CertificateRequest" (9) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake, ServerHelloDone" (9) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel (9) authorize { (9) policy filter_username { (9) if (&User-Name) { (9) if (&User-Name) -> TRUE (9) if (&User-Name) { (9) if (&User-Name =~ / /) { (9) if (&User-Name =~ / /) -> FALSE (9) if (&User-Name =~ /@[^@]*@/ ) { (9) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (9) if (&User-Name =~ /\.\./ ) { (9) if (&User-Name =~ /\.\./ ) -> FALSE (9) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (9) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (9) if (&User-Name =~ /\.$/) { (9) if (&User-Name =~ /\.$/) -> FALSE (9) if (&User-Name =~ /(a)\./) { (9) if (&User-Name =~ /(a)\./) -> FALSE (9) } # if (&User-Name) = notfound (9) } # policy filter_username = notfound (9) [chap] = noop (9) [mschap] = noop (9) suffix: Checking for suffix after "@" (9) suffix: No '@' in User-Name = "martin-test-client-cert", looking up realm NULL (9) suffix: No such realm "NULL" (9) [suffix] = noop (9) update control { (9) &Proxy-To-Realm := LOCAL (9) } # update control = noop (9) inner-eap: Peer sent EAP Response (code 2) ID 10 length 6 (9) inner-eap: No EAP Start, assuming it's an on-going EAP conversation (9) [inner-eap] = updated (9) [files] = noop (9) [expiration] = noop (9) [logintime] = noop (9) [pap] = noop (9) } # authorize = updated (9) WARNING: You set Proxy-To-Realm = LOCAL, but the realm does not exist! Cancelling invalid proxy request. (9) Found Auth-Type = inner-eap (9) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (9) Auth-Type inner-eap { (9) inner-eap: Removing EAP session with state 0x7d82a9617f88a413 (9) inner-eap: Previous EAP request found for state 0x7d82a9617f88a413, released from the list (9) inner-eap: Peer sent packet with method EAP TLS (13) (9) inner-eap: Calling submodule eap_tls to process data (9) eap_tls: (TLS) Peer ACKed our handshake fragment (9) inner-eap: Sending EAP Request (code 1) ID 11 length 790 (9) inner-eap: EAP session adding &reply:State = 0x7d82a9617e89a413 (9) [inner-eap] = handled (9) } # Auth-Type inner-eap = handled (9) Using Post-Auth-Type Challenge (9) Post-Auth-Type sub-section not found. Ignoring. (9) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (9) session-state: Saving cached attributes (9) Framed-MTU = 921 (9) TLS-Session-Information = "(TLS) TLS - recv TLS 1.3 Handshake, ClientHello" (9) TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake, ServerHello" (9) TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake, Certificate" (9) TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake, ServerKeyExchange" (9) TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake, CertificateRequest" (9) TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake, ServerHelloDone" (9) } # server inner-tunnel (9) Virtual server sending reply (9) EAP-Message = 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 (9) Message-Authenticator = 0x00000000000000000000000000000000 (9) State = 0x7d82a9617e89a413afebab08aa0725a8 (9) eap_teap: Got tunneled Access-Challenge (9) eap: Sending EAP Request (code 1) ID 11 length 829 (9) eap: EAP session adding &reply:State = 0xc2f31397cbf82456 (9) [eap] = handled (9) if (handled && (Response-Packet-Type == Access-Challenge)) { (9) EXPAND Response-Packet-Type (9) --> Access-Challenge (9) if (handled && (Response-Packet-Type == Access-Challenge)) -> TRUE (9) if (handled && (Response-Packet-Type == Access-Challenge)) { (9) attr_filter.access_challenge: EXPAND %{User-Name} (9) attr_filter.access_challenge: --> anon (9) attr_filter.access_challenge: Matched entry DEFAULT at line 12 (9) [attr_filter.access_challenge.post-auth] = updated (9) [handled] = handled (9) } # if (handled && (Response-Packet-Type == Access-Challenge)) = handled (9) } # Auth-Type eap = handled (9) Using Post-Auth-Type Challenge (9) # Executing group from file /etc/raddb/sites-enabled/default (9) Challenge { ... } # empty sub-section is ignored (9) session-state: Saving cached attributes (9) Framed-MTU = 984 (9) TLS-Session-Information = "(TLS) TEAP - recv TLS 1.3 Handshake, ClientHello" (9) TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerHello" (9) TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, Certificate" (9) TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerKeyExchange" (9) TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerHelloDone" (9) TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2 Handshake, ClientKeyExchange" (9) TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2 Handshake, Finished" (9) TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 ChangeCipherSpec" (9) TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, Finished" (9) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (9) TLS-Session-Version = "TLS 1.2" (9) Sent Access-Challenge Id 3 from 10.78.5.223:1645 to 10.78.1.215:1645 length 893 (9) EAP-Message = 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 (9) Message-Authenticator = 0x00000000000000000000000000000000 (9) State = 0xc2f31397cbf82456155e1115101ee725 (9) Finished request Waking up in 0.7 seconds. (6) Cleaning up request packet ID 0 with timestamp +69 due to cleanup_delay was reached Waking up in 1.5 seconds. (10) Received Access-Request Id 4 from 10.78.1.215:1645 to 10.78.5.223:1645 length 1591 (10) User-Name = "anon" (10) Service-Type = Framed-User (10) Cisco-AVPair = "service-type=Framed" (10) Framed-MTU = 1500 (10) Called-Station-Id = "00-3C-10-AB-A2-8A" (10) Calling-Station-Id = "C8-F7-50-08-DD-9F" (10) EAP-Message = 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 (10) Message-Authenticator = 0x5c5a3cb4dbdc83a2d2841ccff5dbf5a0 (10) Cisco-AVPair = "audit-session-id=0A4E01D7000006B823D3132B" (10) Cisco-AVPair = "method=dot1x" (10) NAS-IP-Address = 10.78.1.215 (10) NAS-Port-Id = "GigabitEthernet1/0/10" (10) NAS-Port-Type = Ethernet (10) NAS-Port = 50110 (10) State = 0xc2f31397cbf82456155e1115101ee725 (10) Restoring &session-state (10) &session-state:Framed-MTU = 984 (10) &session-state:TLS-Session-Information = "(TLS) TEAP - recv TLS 1.3 Handshake, ClientHello" (10) &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerHello" (10) &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, Certificate" (10) &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerKeyExchange" (10) &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerHelloDone" (10) &session-state:TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2 Handshake, ClientKeyExchange" (10) &session-state:TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2 Handshake, Finished" (10) &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 ChangeCipherSpec" (10) &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, Finished" (10) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (10) &session-state:TLS-Session-Version = "TLS 1.2" (10) # Executing section authorize from file /etc/raddb/sites-enabled/default (10) authorize { (10) policy filter_username { (10) if (&User-Name) { (10) if (&User-Name) -> TRUE (10) if (&User-Name) { (10) if (&User-Name =~ / /) { (10) if (&User-Name =~ / /) -> FALSE (10) if (&User-Name =~ /@[^@]*@/ ) { (10) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (10) if (&User-Name =~ /\.\./ ) { (10) if (&User-Name =~ /\.\./ ) -> FALSE (10) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (10) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (10) if (&User-Name =~ /\.$/) { (10) if (&User-Name =~ /\.$/) -> FALSE (10) if (&User-Name =~ /(a)\./) { (10) if (&User-Name =~ /(a)\./) -> FALSE (10) } # if (&User-Name) = notfound (10) } # policy filter_username = notfound (10) [preprocess] = ok (10) [chap] = noop (10) [mschap] = noop (10) [digest] = noop (10) suffix: Checking for suffix after "@" (10) suffix: No '@' in User-Name = "anon", looking up realm NULL (10) suffix: No such realm "NULL" (10) [suffix] = noop (10) eap: Peer sent EAP Response (code 2) ID 11 length 1328 (10) eap: Continuing tunnel setup (10) [eap] = ok (10) } # authorize = ok (10) Found Auth-Type = eap (10) # Executing group from file /etc/raddb/sites-enabled/default (10) Auth-Type eap { (10) eap: Removing EAP session with state 0xc2f31397cbf82456 (10) eap: Previous EAP request found for state 0xc2f31397cbf82456, released from the list (10) eap: Peer sent packet with method EAP TEAP (55) (10) eap: Calling submodule eap_teap to process data (10) eap_teap: Authenticate (10) eap_teap: (TLS) EAP Done initial handshake (10) eap_teap: Session established. Proceeding to decode tunneled attributes (10) eap_teap: Got Tunneled TEAP TLVs (10) eap_teap: FreeRADIUS-EAP-TEAP-EAP-Payload = 0x020b05090d80000004ff16030304c70b00037500037200036f3082036b30820253a003020102020102300d06092a864886f70d01010b05003068310b3009060355040613024445310f300d06035504070c06426f6368756d312f302d060355040a0c2649534c20496e7465726e65742053696368657268656974736c6f6573756e67656e20476d62483117301506035504030c0e6d617274696e2d746573742d6361301e170d3234313132313133313035305a170d3334313131393133313035305a3071310b3009060355040613024445310f300d06035504070c06426f6368756d312f302d060355040a0c2649534c20496e7465726e65742053696368657268656974736c6f6573756e67656e20476d62483120301e06035504030c176d617274696e2d746573742d636c69656e742d6365727430820122300d06092a864886f70d01010105000382010f003082010a0282010100b915fb07553ec185e591403232f7f3b944e6435cf03dc7 (10) eap_teap: Processing received EAP Payload (10) eap_teap: Got tunneled request (10) eap_teap: EAP-Message = 0x020b05090d80000004ff16030304c70b00037500037200036f3082036b30820253a003020102020102300d06092a864886f70d01010b05003068310b3009060355040613024445310f300d06035504070c06426f6368756d312f302d060355040a0c2649534c20496e7465726e65742053696368657268656974736c6f6573756e67656e20476d62483117301506035504030c0e6d617274696e2d746573742d6361301e170d3234313132313133313035305a170d3334313131393133313035305a3071310b3009060355040613024445310f300d06035504070c06426f6368756d312f302d060355040a0c2649534c20496e7465726e65742053696368657268656974736c6f6573756e67656e20476d62483120301e06035504030c176d617274696e2d746573742d636c69656e742d6365727430820122300d06092a864886f70d01010105000382010f003082010a0282010100b915fb07553ec185e591403232f7f3b944e6435cf03dc709e1f2bc94d912244d6c (10) eap_teap: AUTHENTICATION (10) Virtual server inner-tunnel received request (10) EAP-Message = 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 (10) FreeRADIUS-Proxied-To = 127.0.0.1 (10) User-Name = "martin-test-client-cert" (10) State = 0x7d82a9617e89a413afebab08aa0725a8 (10) WARNING: Outer User-Name is not anonymized. User privacy is compromised. (10) server inner-tunnel { (10) Restoring &session-state (10) &session-state:Framed-MTU = 921 (10) &session-state:TLS-Session-Information = "(TLS) TLS - recv TLS 1.3 Handshake, ClientHello" (10) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake, ServerHello" (10) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake, Certificate" (10) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake, ServerKeyExchange" (10) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake, CertificateRequest" (10) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake, ServerHelloDone" (10) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel (10) authorize { (10) policy filter_username { (10) if (&User-Name) { (10) if (&User-Name) -> TRUE (10) if (&User-Name) { (10) if (&User-Name =~ / /) { (10) if (&User-Name =~ / /) -> FALSE (10) if (&User-Name =~ /@[^@]*@/ ) { (10) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (10) if (&User-Name =~ /\.\./ ) { (10) if (&User-Name =~ /\.\./ ) -> FALSE (10) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (10) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (10) if (&User-Name =~ /\.$/) { (10) if (&User-Name =~ /\.$/) -> FALSE (10) if (&User-Name =~ /(a)\./) { (10) if (&User-Name =~ /(a)\./) -> FALSE (10) } # if (&User-Name) = notfound (10) } # policy filter_username = notfound (10) [chap] = noop (10) [mschap] = noop (10) suffix: Checking for suffix after "@" (10) suffix: No '@' in User-Name = "martin-test-client-cert", looking up realm NULL (10) suffix: No such realm "NULL" (10) [suffix] = noop (10) update control { (10) &Proxy-To-Realm := LOCAL (10) } # update control = noop (10) inner-eap: Peer sent EAP Response (code 2) ID 11 length 1289 (10) inner-eap: No EAP Start, assuming it's an on-going EAP conversation (10) [inner-eap] = updated (10) [files] = noop (10) [expiration] = noop (10) [logintime] = noop (10) [pap] = noop (10) } # authorize = updated (10) WARNING: You set Proxy-To-Realm = LOCAL, but the realm does not exist! Cancelling invalid proxy request. (10) Found Auth-Type = inner-eap (10) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (10) Auth-Type inner-eap { (10) inner-eap: Removing EAP session with state 0x7d82a9617e89a413 (10) inner-eap: Previous EAP request found for state 0x7d82a9617e89a413, released from the list (10) inner-eap: Peer sent packet with method EAP TLS (13) (10) inner-eap: Calling submodule eap_tls to process data (10) eap_tls: (TLS) EAP Peer says that the final record size will be 1279 bytes (10) eap_tls: (TLS) EAP Got all data (1279 bytes) (10) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write server done (10) eap_tls: (TLS) TLS - recv TLS 1.2 Handshake, Certificate (10) eap_tls: (TLS) TLS - Creating attributes from 2 certificate in chain (10) eap_tls: TLS-Cert-Serial := "6837d2898be29a5a56edbd7008ad02b855b72ecc" (10) eap_tls: TLS-Cert-Expiration := "341119130951Z" (10) eap_tls: TLS-Cert-Valid-Since := "241121130951Z" (10) eap_tls: TLS-Cert-Subject := "/C=DE/L=Bochum/O=Test/CN=martin-test-ca" (10) eap_tls: TLS-Cert-Issuer := "/C=DE/L=Bochum/O=Test/CN=martin-test-ca" (10) eap_tls: TLS-Cert-Common-Name := "martin-test-ca" (10) eap_tls: (TLS) TLS - Creating attributes from 1 certificate in chain (10) eap_tls: TLS-Client-Cert-Serial := "02" (10) eap_tls: TLS-Client-Cert-Expiration := "341119131050Z" (10) eap_tls: TLS-Client-Cert-Valid-Since := "241121131050Z" (10) eap_tls: TLS-Client-Cert-Subject := "/C=DE/L=Bochum/O=Test/CN=martin-test-client-cert" (10) eap_tls: TLS-Client-Cert-Issuer := "/C=DE/L=Bochum/O=Test/CN=martin-test-ca" (10) eap_tls: TLS-Client-Cert-Common-Name := "martin-test-client-cert" (10) eap_tls: TLS-Client-Cert-X509v3-Extended-Key-Usage += "TLS Web Client Authentication" (10) eap_tls: TLS-Client-Cert-X509v3-Extended-Key-Usage-OID += "1.3.6.1.5.5.7.3.2" Certificate chain - 1 intermediate CA cert(s) untrusted To forbid these certificates see 'reject_unknown_intermediate_ca' (TLS) untrusted certificate with depth [0] subject name /C=DE/L=Bochum/O=Test/CN=martin-test-client-cert (10) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS read client certificate (10) eap_tls: (TLS) TLS - recv TLS 1.2 Handshake, ClientKeyExchange (10) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS read client key exchange (10) eap_tls: (TLS) TLS - recv TLS 1.2 Handshake, CertificateVerify (10) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS read certificate verify (10) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS read change cipher spec (10) eap_tls: (TLS) TLS - recv TLS 1.2 Handshake, Finished (10) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS read finished (10) eap_tls: (TLS) TLS - send TLS 1.2 ChangeCipherSpec (10) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write change cipher spec (10) eap_tls: (TLS) TLS - send TLS 1.2 Handshake, Finished (10) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write finished (10) eap_tls: (TLS) TLS - Handshake state - SSL negotiation finished successfully (10) eap_tls: (TLS) TLS - Connection Established (10) eap_tls: TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (10) eap_tls: TLS-Session-Version = "TLS 1.2" (10) inner-eap: Sending EAP Request (code 1) ID 12 length 61 (10) inner-eap: EAP session adding &reply:State = 0x7d82a961798ea413 (10) [inner-eap] = handled (10) } # Auth-Type inner-eap = handled (10) Using Post-Auth-Type Challenge (10) Post-Auth-Type sub-section not found. Ignoring. (10) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (10) session-state: Saving cached attributes (10) Framed-MTU = 921 (10) TLS-Session-Information = "(TLS) TLS - recv TLS 1.3 Handshake, ClientHello" (10) TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake, ServerHello" (10) TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake, Certificate" (10) TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake, ServerKeyExchange" (10) TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake, CertificateRequest" (10) TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake, ServerHelloDone" (10) TLS-Session-Information = "(TLS) TLS - recv TLS 1.2 Handshake, Certificate" (10) TLS-Session-Information = "(TLS) TLS - recv TLS 1.2 Handshake, ClientKeyExchange" (10) TLS-Session-Information = "(TLS) TLS - recv TLS 1.2 Handshake, CertificateVerify" (10) TLS-Session-Information = "(TLS) TLS - recv TLS 1.2 Handshake, Finished" (10) TLS-Session-Information = "(TLS) TLS - send TLS 1.2 ChangeCipherSpec" (10) TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake, Finished" (10) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (10) TLS-Session-Version = "TLS 1.2" (10) } # server inner-tunnel (10) Virtual server sending reply (10) EAP-Message = 0x010c003d0d800000003314030300010116030300289fb24bab4d6017bbf77aeadc565aa84db1623c9874948e97b337dcd9d0c454265394a6b04c125a3e (10) Message-Authenticator = 0x00000000000000000000000000000000 (10) State = 0x7d82a961798ea413afebab08aa0725a8 (10) eap_teap: Got tunneled Access-Challenge (10) eap: Sending EAP Request (code 1) ID 12 length 100 (10) eap: EAP session adding &reply:State = 0xc2f31397c8ff2456 (10) [eap] = handled (10) if (handled && (Response-Packet-Type == Access-Challenge)) { (10) EXPAND Response-Packet-Type (10) --> Access-Challenge (10) if (handled && (Response-Packet-Type == Access-Challenge)) -> TRUE (10) if (handled && (Response-Packet-Type == Access-Challenge)) { (10) attr_filter.access_challenge: EXPAND %{User-Name} (10) attr_filter.access_challenge: --> anon (10) attr_filter.access_challenge: Matched entry DEFAULT at line 12 (10) [attr_filter.access_challenge.post-auth] = updated (10) [handled] = handled (10) } # if (handled && (Response-Packet-Type == Access-Challenge)) = handled (10) } # Auth-Type eap = handled (10) Using Post-Auth-Type Challenge (10) # Executing group from file /etc/raddb/sites-enabled/default (10) Challenge { ... } # empty sub-section is ignored (10) session-state: Saving cached attributes (10) Framed-MTU = 984 (10) TLS-Session-Information = "(TLS) TEAP - recv TLS 1.3 Handshake, ClientHello" (10) TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerHello" (10) TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, Certificate" (10) TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerKeyExchange" (10) TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerHelloDone" (10) TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2 Handshake, ClientKeyExchange" (10) TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2 Handshake, Finished" (10) TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 ChangeCipherSpec" (10) TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, Finished" (10) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (10) TLS-Session-Version = "TLS 1.2" (10) Sent Access-Challenge Id 4 from 10.78.5.223:1645 to 10.78.1.215:1645 length 158 (10) EAP-Message = 0x010c006437011703030059d58e097e35b64344cb8a3cbb988707670cf89a4c4601cff4b73ee9d203d19d55513749592b0a2a0aeb23eac1913c5a73cdb1c86d436a96be7a4909560d8c2b3ce12b0eaa40fa1a57a28bed7fcccfbf0f9adbe176675cc5341a (10) Message-Authenticator = 0x00000000000000000000000000000000 (10) State = 0xc2f31397c8ff2456155e1115101ee725 (10) Finished request Waking up in 0.7 seconds. (11) Received Access-Request Id 5 from 10.78.1.215:1645 to 10.78.5.223:1645 length 298 (11) User-Name = "anon" (11) Service-Type = Framed-User (11) Cisco-AVPair = "service-type=Framed" (11) Framed-MTU = 1500 (11) Called-Station-Id = "00-3C-10-AB-A2-8A" (11) Calling-Station-Id = "C8-F7-50-08-DD-9F" (11) EAP-Message = 0x020c002d37011703030022000000000000000667eaf709b078f5f253cfe9fb4e5ed9a3e2c442516a14c3b8506b (11) Message-Authenticator = 0x161458dbe240cb9e668b603354de2a11 (11) Cisco-AVPair = "audit-session-id=0A4E01D7000006B823D3132B" (11) Cisco-AVPair = "method=dot1x" (11) NAS-IP-Address = 10.78.1.215 (11) NAS-Port-Id = "GigabitEthernet1/0/10" (11) NAS-Port-Type = Ethernet (11) NAS-Port = 50110 (11) State = 0xc2f31397c8ff2456155e1115101ee725 (11) Restoring &session-state (11) &session-state:Framed-MTU = 984 (11) &session-state:TLS-Session-Information = "(TLS) TEAP - recv TLS 1.3 Handshake, ClientHello" (11) &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerHello" (11) &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, Certificate" (11) &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerKeyExchange" (11) &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerHelloDone" (11) &session-state:TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2 Handshake, ClientKeyExchange" (11) &session-state:TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2 Handshake, Finished" (11) &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 ChangeCipherSpec" (11) &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, Finished" (11) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (11) &session-state:TLS-Session-Version = "TLS 1.2" (11) # Executing section authorize from file /etc/raddb/sites-enabled/default (11) authorize { (11) policy filter_username { (11) if (&User-Name) { (11) if (&User-Name) -> TRUE (11) if (&User-Name) { (11) if (&User-Name =~ / /) { (11) if (&User-Name =~ / /) -> FALSE (11) if (&User-Name =~ /@[^@]*@/ ) { (11) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (11) if (&User-Name =~ /\.\./ ) { (11) if (&User-Name =~ /\.\./ ) -> FALSE (11) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (11) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (11) if (&User-Name =~ /\.$/) { (11) if (&User-Name =~ /\.$/) -> FALSE (11) if (&User-Name =~ /(a)\./) { (11) if (&User-Name =~ /(a)\./) -> FALSE (11) } # if (&User-Name) = notfound (11) } # policy filter_username = notfound (11) [preprocess] = ok (11) [chap] = noop (11) [mschap] = noop (11) [digest] = noop (11) suffix: Checking for suffix after "@" (11) suffix: No '@' in User-Name = "anon", looking up realm NULL (11) suffix: No such realm "NULL" (11) [suffix] = noop (11) eap: Peer sent EAP Response (code 2) ID 12 length 45 (11) eap: Continuing tunnel setup (11) [eap] = ok (11) } # authorize = ok (11) Found Auth-Type = eap (11) # Executing group from file /etc/raddb/sites-enabled/default (11) Auth-Type eap { (11) eap: Removing EAP session with state 0xc2f31397c8ff2456 (11) eap: Previous EAP request found for state 0xc2f31397c8ff2456, released from the list (11) eap: Peer sent packet with method EAP TEAP (55) (11) eap: Calling submodule eap_teap to process data (11) eap_teap: Authenticate (11) eap_teap: (TLS) EAP Done initial handshake (11) eap_teap: Session established. Proceeding to decode tunneled attributes (11) eap_teap: Got Tunneled TEAP TLVs (11) eap_teap: FreeRADIUS-EAP-TEAP-EAP-Payload = 0x020c00060d00 (11) eap_teap: Processing received EAP Payload (11) eap_teap: Got tunneled request (11) eap_teap: EAP-Message = 0x020c00060d00 (11) eap_teap: AUTHENTICATION (11) Virtual server inner-tunnel received request (11) EAP-Message = 0x020c00060d00 (11) FreeRADIUS-Proxied-To = 127.0.0.1 (11) User-Name = "martin-test-client-cert" (11) State = 0x7d82a961798ea413afebab08aa0725a8 (11) WARNING: Outer User-Name is not anonymized. User privacy is compromised. (11) server inner-tunnel { (11) Restoring &session-state (11) &session-state:Framed-MTU = 921 (11) &session-state:TLS-Session-Information = "(TLS) TLS - recv TLS 1.3 Handshake, ClientHello" (11) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake, ServerHello" (11) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake, Certificate" (11) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake, ServerKeyExchange" (11) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake, CertificateRequest" (11) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake, ServerHelloDone" (11) &session-state:TLS-Session-Information = "(TLS) TLS - recv TLS 1.2 Handshake, Certificate" (11) &session-state:TLS-Session-Information = "(TLS) TLS - recv TLS 1.2 Handshake, ClientKeyExchange" (11) &session-state:TLS-Session-Information = "(TLS) TLS - recv TLS 1.2 Handshake, CertificateVerify" (11) &session-state:TLS-Session-Information = "(TLS) TLS - recv TLS 1.2 Handshake, Finished" (11) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2 ChangeCipherSpec" (11) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.2 Handshake, Finished" (11) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (11) &session-state:TLS-Session-Version = "TLS 1.2" (11) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel (11) authorize { (11) policy filter_username { (11) if (&User-Name) { (11) if (&User-Name) -> TRUE (11) if (&User-Name) { (11) if (&User-Name =~ / /) { (11) if (&User-Name =~ / /) -> FALSE (11) if (&User-Name =~ /@[^@]*@/ ) { (11) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (11) if (&User-Name =~ /\.\./ ) { (11) if (&User-Name =~ /\.\./ ) -> FALSE (11) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (11) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (11) if (&User-Name =~ /\.$/) { (11) if (&User-Name =~ /\.$/) -> FALSE (11) if (&User-Name =~ /(a)\./) { (11) if (&User-Name =~ /(a)\./) -> FALSE (11) } # if (&User-Name) = notfound (11) } # policy filter_username = notfound (11) [chap] = noop (11) [mschap] = noop (11) suffix: Checking for suffix after "@" (11) suffix: No '@' in User-Name = "martin-test-client-cert", looking up realm NULL (11) suffix: No such realm "NULL" (11) [suffix] = noop (11) update control { (11) &Proxy-To-Realm := LOCAL (11) } # update control = noop (11) inner-eap: Peer sent EAP Response (code 2) ID 12 length 6 (11) inner-eap: No EAP Start, assuming it's an on-going EAP conversation (11) [inner-eap] = updated (11) [files] = noop (11) [expiration] = noop (11) [logintime] = noop (11) [pap] = noop (11) } # authorize = updated (11) WARNING: You set Proxy-To-Realm = LOCAL, but the realm does not exist! Cancelling invalid proxy request. (11) Found Auth-Type = inner-eap (11) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (11) Auth-Type inner-eap { (11) inner-eap: Removing EAP session with state 0x7d82a961798ea413 (11) inner-eap: Previous EAP request found for state 0x7d82a961798ea413, released from the list (11) inner-eap: Peer sent packet with method EAP TLS (13) (11) inner-eap: Calling submodule eap_tls to process data (11) eap_tls: (TLS) Peer ACKed our handshake fragment. handshake is finished (11) inner-eap: Sending EAP Success (code 3) ID 12 length 4 (11) inner-eap: Freeing handler (11) [inner-eap] = ok (11) } # Auth-Type inner-eap = ok (11) # Executing section post-auth from file /etc/raddb/sites-enabled/inner-tunnel (11) post-auth { (11) if (0) { (11) if (0) -> FALSE (11) } # post-auth = noop (11) } # server inner-tunnel (11) Virtual server sending reply (11) MS-MPPE-Recv-Key = 0x68b33fa03c2a947717ab842050d1e6eb12eded7e0feb2dd0141e02b9ba42de62 (11) MS-MPPE-Send-Key = 0x2912104beaf44768c82898fee9792a14d76ecd2da4f8a9e8673462d4244bce4a (11) EAP-MSK = 0x68b33fa03c2a947717ab842050d1e6eb12eded7e0feb2dd0141e02b9ba42de622912104beaf44768c82898fee9792a14d76ecd2da4f8a9e8673462d4244bce4a (11) EAP-EMSK = 0x539ddd8a80123822102125690512d370f86ef93b1e4b8a258c02b92be19c3a04fd3dbd4c3bf034c244e02a117285a6576c837bf6304d59656052f9cbfb837c88 (11) EAP-Session-Id = 0x0d894df71571b44caa45ce419e7802bc2f64696a756113459d3036ed36abbf8be85e6cb1c6fd2673e4e50a26b49d6a3157a086a7f38d6f0d55e7e3ff8b8e4a1e03 (11) EAP-Message = 0x030c0004 (11) Message-Authenticator = 0x00000000000000000000000000000000 (11) User-Name = "martin-test-client-cert" (11) eap_teap: Got tunneled Access-Accept (11) eap_teap: MSCHAP_MPPE_RECV_KEY [high MSK] - hexdump(len=32): 68 b3 3f a0 3c 2a 94 77 17 ab 84 20 50 d1 e6 eb 12 ed ed 7e 0f eb 2d d0 14 1e 02 b9 ba 42 de 62 (11) eap_teap: MSCHAP_MPPE_SEND_KEY [low MSK] - hexdump(len=32): 29 12 10 4b ea f4 47 68 c8 28 98 fe e9 79 2a 14 d7 6e cd 2d a4 f8 a9 e8 67 34 62 d4 24 4b ce 4a (11) eap_teap: Sending Cryptobinding (11) eap_teap: Updating ICMK (j = 1) (11) eap_teap: IMSK from MSK - hexdump(len=32): 68 b3 3f a0 3c 2a 94 77 17 ab 84 20 50 d1 e6 eb 12 ed ed 7e 0f eb 2d d0 14 1e 02 b9 ba 42 de 62 (11) eap_teap: MSK S-IMCK[j] - hexdump(len=40): ea f8 3b 4e ef 4e f3 d1 5d 50 3d a6 dd a0 cf 5f dc 03 f9 12 8d aa 94 4a c8 ad 62 0f cf fe e9 5c fd a4 f6 25 af cf 19 de (11) eap_teap: MSK CMK[j] - hexdump(len=20): 53 e0 ad f2 72 70 ee b1 76 26 01 eb 4f f5 99 56 0f 76 bb 96 (11) eap_teap: IMSK from EMSK - hexdump(len=32): 41 34 3a 53 6a 1e a1 2f 67 44 f9 50 3f 24 aa 11 45 94 24 b3 e0 9f 97 ea cb 85 da 1b d4 c2 5b 3c (11) eap_teap: EMSK S-IMCK[j] - hexdump(len=40): e0 64 11 18 00 36 9b c0 25 10 e4 f3 00 14 ee fb 50 4e dd cf 3c ff af 52 71 bc 85 78 ad 05 c4 65 99 0e 42 87 28 68 2b a0 (11) eap_teap: EMSK CMK[j] - hexdump(len=20): cb d7 87 35 9c 35 ca f5 62 58 c4 5e 55 6c 84 10 70 d7 02 e9 (11) eap_teap: BUFFER for Compound MAC calculation - hexdump(len=89): 80 0c 00 4c 00 01 01 30 e9 5b c3 6f 1f 2d 0a 80 f8 34 3f 9c cf eb 67 e2 34 2f 95 ac bd d9 c3 ed 85 d7 61 b1 04 35 ca 16 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 37 00 01 00 04 31 32 33 34 (11) eap: Sending EAP Request (code 1) ID 13 length 127 (11) eap: EAP session adding &reply:State = 0xc2f31397c9fe2456 (11) [eap] = handled (11) if (handled && (Response-Packet-Type == Access-Challenge)) { (11) EXPAND Response-Packet-Type (11) --> Access-Challenge (11) if (handled && (Response-Packet-Type == Access-Challenge)) -> TRUE (11) if (handled && (Response-Packet-Type == Access-Challenge)) { (11) attr_filter.access_challenge: EXPAND %{User-Name} (11) attr_filter.access_challenge: --> anon (11) attr_filter.access_challenge: Matched entry DEFAULT at line 12 (11) [attr_filter.access_challenge.post-auth] = updated (11) [handled] = handled (11) } # if (handled && (Response-Packet-Type == Access-Challenge)) = handled (11) } # Auth-Type eap = handled (11) Using Post-Auth-Type Challenge (11) # Executing group from file /etc/raddb/sites-enabled/default (11) Challenge { ... } # empty sub-section is ignored (11) session-state: Saving cached attributes (11) Framed-MTU = 984 (11) TLS-Session-Information = "(TLS) TEAP - recv TLS 1.3 Handshake, ClientHello" (11) TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerHello" (11) TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, Certificate" (11) TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerKeyExchange" (11) TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerHelloDone" (11) TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2 Handshake, ClientKeyExchange" (11) TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2 Handshake, Finished" (11) TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 ChangeCipherSpec" (11) TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, Finished" (11) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (11) TLS-Session-Version = "TLS 1.2" (11) Sent Access-Challenge Id 5 from 10.78.5.223:1645 to 10.78.1.215:1645 length 185 (11) EAP-Message = 0x010d007f37011703030074d58e097e35b643455b253d59113fda874fb020d4afe40bf47f2fd956366e3ba6e71eb6bc116180ad76ed7f9026c8acf7f8ecd0c20012b4ec9847194ee92cfde08f52ad7d26aa1d53a74cb2861183b8b63e93733eb1eaf20300fea4b99bd31ec45acaf579162bada39136723153754978f89fce9c (11) Message-Authenticator = 0x00000000000000000000000000000000 (11) State = 0xc2f31397c9fe2456155e1115101ee725 (11) Finished request Waking up in 0.5 seconds. (7) Cleaning up request packet ID 1 with timestamp +70 due to cleanup_delay was reached Waking up in 1.1 seconds. (12) Received Access-Request Id 6 from 10.78.1.215:1645 to 10.78.5.223:1645 length 388 (12) User-Name = "anon" (12) Service-Type = Framed-User (12) Cisco-AVPair = "service-type=Framed" (12) Framed-MTU = 1500 (12) Called-Station-Id = "00-3C-10-AB-A2-8A" (12) Calling-Station-Id = "C8-F7-50-08-DD-9F" (12) EAP-Message = 0x020d00873701170303007c0000000000000007a56e372d3a12917d7af3f2235b5393274dde9acb6899bb6e2b5199d025e9532406f66ab5419a9e257c275a21943f8fde814496ae136ada9525a4a90edfb639af9639bcf459f8a527a09760a991ce8a28bd0811f4cf5d397aa895d1b5ebdb8e3e95502f3da03d3707e8ba5dc462e3eca1e2809736 (12) Message-Authenticator = 0x3ec01ead68ef624464bc172d80e35e99 (12) Cisco-AVPair = "audit-session-id=0A4E01D7000006B823D3132B" (12) Cisco-AVPair = "method=dot1x" (12) NAS-IP-Address = 10.78.1.215 (12) NAS-Port-Id = "GigabitEthernet1/0/10" (12) NAS-Port-Type = Ethernet (12) NAS-Port = 50110 (12) State = 0xc2f31397c9fe2456155e1115101ee725 (12) Restoring &session-state (12) &session-state:Framed-MTU = 984 (12) &session-state:TLS-Session-Information = "(TLS) TEAP - recv TLS 1.3 Handshake, ClientHello" (12) &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerHello" (12) &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, Certificate" (12) &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerKeyExchange" (12) &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, ServerHelloDone" (12) &session-state:TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2 Handshake, ClientKeyExchange" (12) &session-state:TLS-Session-Information = "(TLS) TEAP - recv TLS 1.2 Handshake, Finished" (12) &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 ChangeCipherSpec" (12) &session-state:TLS-Session-Information = "(TLS) TEAP - send TLS 1.2 Handshake, Finished" (12) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (12) &session-state:TLS-Session-Version = "TLS 1.2" (12) # Executing section authorize from file /etc/raddb/sites-enabled/default (12) authorize { (12) policy filter_username { (12) if (&User-Name) { (12) if (&User-Name) -> TRUE (12) if (&User-Name) { (12) if (&User-Name =~ / /) { (12) if (&User-Name =~ / /) -> FALSE (12) if (&User-Name =~ /@[^@]*@/ ) { (12) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (12) if (&User-Name =~ /\.\./ ) { (12) if (&User-Name =~ /\.\./ ) -> FALSE (12) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (12) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (12) if (&User-Name =~ /\.$/) { (12) if (&User-Name =~ /\.$/) -> FALSE (12) if (&User-Name =~ /(a)\./) { (12) if (&User-Name =~ /(a)\./) -> FALSE (12) } # if (&User-Name) = notfound (12) } # policy filter_username = notfound (12) [preprocess] = ok (12) [chap] = noop (12) [mschap] = noop (12) [digest] = noop (12) suffix: Checking for suffix after "@" (12) suffix: No '@' in User-Name = "anon", looking up realm NULL (12) suffix: No such realm "NULL" (12) [suffix] = noop (12) eap: Peer sent EAP Response (code 2) ID 13 length 135 (12) eap: Continuing tunnel setup (12) [eap] = ok (12) } # authorize = ok (12) Found Auth-Type = eap (12) # Executing group from file /etc/raddb/sites-enabled/default (12) Auth-Type eap { (12) eap: Removing EAP session with state 0xc2f31397c9fe2456 (12) eap: Previous EAP request found for state 0xc2f31397c9fe2456, released from the list (12) eap: Peer sent packet with method EAP TEAP (55) (12) eap: Calling submodule eap_teap to process data (12) eap_teap: Authenticate (12) eap_teap: (TLS) EAP Done initial handshake (12) eap_teap: Session established. Proceeding to decode tunneled attributes (12) eap_teap: EAP-TEAP TLV Status indicates failure. Rejecting request. (12) eap: ERROR: Failed continuing EAP TEAP (55) session. EAP sub-module failed (12) eap: Sending EAP Failure (code 4) ID 13 length 4 (12) eap: Failed in EAP select (12) [eap] = invalid (12) } # Auth-Type eap = invalid (12) Failed to authenticate the user (12) Using Post-Auth-Type Reject (12) # Executing group from file /etc/raddb/sites-enabled/default (12) Post-Auth-Type REJECT { (12) attr_filter.access_reject: EXPAND %{User-Name} (12) attr_filter.access_reject: --> anon (12) attr_filter.access_reject: Matched entry DEFAULT at line 11 (12) [attr_filter.access_reject] = updated (12) [eap] = noop (12) policy remove_reply_message_if_eap { (12) if (&reply:EAP-Message && &reply:Reply-Message) { (12) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (12) else { (12) [noop] = noop (12) } # else = noop (12) } # policy remove_reply_message_if_eap = noop (12) } # Post-Auth-Type REJECT = updated (12) Delaying response for 1.000000 seconds (8) Cleaning up request packet ID 2 with timestamp +72 due to cleanup_delay was reached Waking up in 0.2 seconds. Waking up in 0.6 seconds. (12) Sending delayed response (12) Sent Access-Reject Id 6 from 10.78.5.223:1645 to 10.78.1.215:1645 length 44 (12) EAP-Message = 0x040d0004 (12) Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 0.5 seconds. (9) Cleaning up request packet ID 3 with timestamp +73 due to cleanup_delay was reached Waking up in 1.5 seconds. (10) Cleaning up request packet ID 4 with timestamp +75 due to cleanup_delay was reached Waking up in 0.2 seconds. (11) Cleaning up request packet ID 5 with timestamp +75 due to cleanup_delay was reached Waking up in 1.5 seconds. (12) Cleaning up request packet ID 6 with timestamp +77 due to cleanup_delay was reached Ready to process requests

3 8

The TACACS virtual server's function
by 黄立成 05 Dec '24

05 Dec '24

Hi guys, I am writing to ask some questions about the TACACS SERVER in version 4.x.x.  I would like to know how can I do things I did in radius server.Things looks different in tacacs. 1)enable authentication 2) authorization privilege level for each user. 3) authorization network attributes. 4) authorzation specific commands. The common things  in 1) 2) 3) I want to do is making different rules for different users.In radius,AUTHOR COMES AFTER AUTHEN,so I just need to set these attributes in USERS file. I am wondering if there is simple configuration I can do or interfaces I can use just like what I did in radius. I am confused because I cannot find an example to follow.I WISH YOU COULD PROVIDE ME A SAMPLE CONFIGURATION FOR TACACS,that will be the best!! THANKS FOR YOUR HELP！黄立成 2071264258(a)qq.com  

2 1

Configure FreeRADIUS to use MySQL installed by HomeBrew
by Hao Fu 04 Dec '24

04 Dec '24

Hello. I'm new to FreeRADIUS. I am configuring FreeRADIUS to use the database in MySQL instead of the text files, so it's easier to manage. I installed FreeRADIUS by Homebrew using "brew install freeradius-server". The Current version is 3.2.6_2. I tested it using radtest and got the "Access-Accept". The MySQL is also installed by Homebrew using "brew install MySQL". The current version is 9.0.1. I created the database "radius" and the default schema for it. Then I modified the radiusd.conf and mods-available/sql files to connect to the MySQL server as suggested in guide/SQL HOWTO: Configuring FreeRADIUS to use SQL. I didn't change anything in sites-available/default and inner-tunnel as the lines containing 'sql' are already uncommented (although they are in the form of '-sql'). Trying to fire up the server by "radius -X" got me this error: radiusd -X FreeRADIUS Version 3.2.6 Copyright (C) 1999-2023 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /opt/homebrew/Cellar/freeradius-server/3.2.6_2/share/freeradius/dictionary including dictionary file /opt/homebrew/Cellar/freeradius-server/3.2.6_2/share/freeradius/dictionary.dhcp including dictionary file /opt/homebrew/Cellar/freeradius-server/3.2.6_2/share/freeradius/dictionary.vqp including dictionary file /opt/homebrew/Cellar/freeradius-server/3.2.6_2/etc/raddb/dictionary including configuration file /opt/homebrew/Cellar/freeradius-server/3.2.6_2/etc/raddb/radiusd.conf including configuration file /opt/homebrew/Cellar/freeradius-server/3.2.6_2/etc/raddb/proxy.conf including configuration file /opt/homebrew/Cellar/freeradius-server/3.2.6_2/etc/raddb/clients.conf including configuration file /opt/homebrew/Cellar/freeradius-server/3.2.6_2/etc/raddb/mods-available/sql including configuration file /opt/homebrew/Cellar/freeradius-server/3.2.6_2/etc/raddb/mods-config/sql/main/mysql/queries.conf including files in directory /opt/homebrew/Cellar/freeradius-server/3.2.6_2/etc/raddb/mods-enabled/ including configuration file /opt/homebrew/Cellar/freeradius-server/3.2.6_2/etc/raddb/mods-enabled/detail.log including configuration file /opt/homebrew/Cellar/freeradius-server/3.2.6_2/etc/raddb/mods-enabled/eap including configuration file /opt/homebrew/Cellar/freeradius-server/3.2.6_2/etc/raddb/mods-enabled/echo including configuration file /opt/homebrew/Cellar/freeradius-server/3.2.6_2/etc/raddb/mods-enabled/utf8 including configuration file /opt/homebrew/Cellar/freeradius-server/3.2.6_2/etc/raddb/mods-enabled/always including configuration file /opt/homebrew/Cellar/freeradius-server/3.2.6_2/etc/raddb/mods-enabled/digest including configuration file /opt/homebrew/Cellar/freeradius-server/3.2.6_2/etc/raddb/mods-enabled/date including configuration file /opt/homebrew/Cellar/freeradius-server/3.2.6_2/etc/raddb/mods-enabled/preprocess including configuration file /opt/homebrew/Cellar/freeradius-server/3.2.6_2/etc/raddb/mods-enabled/pap including configuration file /opt/homebrew/Cellar/freeradius-server/3.2.6_2/etc/raddb/mods-enabled/expr including configuration file /opt/homebrew/Cellar/freeradius-server/3.2.6_2/etc/raddb/mods-enabled/radutmp including configuration file /opt/homebrew/Cellar/freeradius-server/3.2.6_2/etc/raddb/mods-enabled/linelog including configuration file /opt/homebrew/Cellar/freeradius-server/3.2.6_2/etc/raddb/mods-enabled/unix including configuration file /opt/homebrew/Cellar/freeradius-server/3.2.6_2/etc/raddb/mods-enabled/detail including configuration file /opt/homebrew/Cellar/freeradius-server/3.2.6_2/etc/raddb/mods-enabled/attr_filter including configuration file /opt/homebrew/Cellar/freeradius-server/3.2.6_2/etc/raddb/mods-enabled/ntlm_auth including configuration file /opt/homebrew/Cellar/freeradius-server/3.2.6_2/etc/raddb/mods-enabled/exec including configuration file /opt/homebrew/Cellar/freeradius-server/3.2.6_2/etc/raddb/mods-enabled/files including configuration file /opt/homebrew/Cellar/freeradius-server/3.2.6_2/etc/raddb/mods-enabled/replicate including configuration file /opt/homebrew/Cellar/freeradius-server/3.2.6_2/etc/raddb/mods-enabled/chap including configuration file /opt/homebrew/Cellar/freeradius-server/3.2.6_2/etc/raddb/mods-enabled/unpack including configuration file /opt/homebrew/Cellar/freeradius-server/3.2.6_2/etc/raddb/mods-enabled/logintime including configuration file /opt/homebrew/Cellar/freeradius-server/3.2.6_2/etc/raddb/mods-enabled/expiration including configuration file /opt/homebrew/Cellar/freeradius-server/3.2.6_2/etc/raddb/mods-enabled/soh including configuration file /opt/homebrew/Cellar/freeradius-server/3.2.6_2/etc/raddb/mods-enabled/totp including configuration file /opt/homebrew/Cellar/freeradius-server/3.2.6_2/etc/raddb/mods-enabled/sradutmp including configuration file /opt/homebrew/Cellar/freeradius-server/3.2.6_2/etc/raddb/mods-enabled/mschap including configuration file /opt/homebrew/Cellar/freeradius-server/3.2.6_2/etc/raddb/mods-enabled/dynamic_clients including configuration file /opt/homebrew/Cellar/freeradius-server/3.2.6_2/etc/raddb/mods-enabled/passwd including configuration file /opt/homebrew/Cellar/freeradius-server/3.2.6_2/etc/raddb/mods-enabled/realm including files in directory /opt/homebrew/Cellar/freeradius-server/3.2.6_2/etc/raddb/policy.d/ including configuration file /opt/homebrew/Cellar/freeradius-server/3.2.6_2/etc/raddb/policy.d/accounting including configuration file /opt/homebrew/Cellar/freeradius-server/3.2.6_2/etc/raddb/policy.d/eap including configuration file /opt/homebrew/Cellar/freeradius-server/3.2.6_2/etc/raddb/policy.d/rfc7542 including configuration file /opt/homebrew/Cellar/freeradius-server/3.2.6_2/etc/raddb/policy.d/canonicalization including configuration file /opt/homebrew/Cellar/freeradius-server/3.2.6_2/etc/raddb/policy.d/abfab-tr including configuration file /opt/homebrew/Cellar/freeradius-server/3.2.6_2/etc/raddb/policy.d/dhcp including configuration file /opt/homebrew/Cellar/freeradius-server/3.2.6_2/etc/raddb/policy.d/cui including configuration file /opt/homebrew/Cellar/freeradius-server/3.2.6_2/etc/raddb/policy.d/filter including configuration file /opt/homebrew/Cellar/freeradius-server/3.2.6_2/etc/raddb/policy.d/moonshot-targeted-ids including configuration file /opt/homebrew/Cellar/freeradius-server/3.2.6_2/etc/raddb/policy.d/operator-name including configuration file /opt/homebrew/Cellar/freeradius-server/3.2.6_2/etc/raddb/policy.d/control including configuration file /opt/homebrew/Cellar/freeradius-server/3.2.6_2/etc/raddb/policy.d/debug including files in directory /opt/homebrew/Cellar/freeradius-server/3.2.6_2/etc/raddb/sites-enabled/ including configuration file /opt/homebrew/Cellar/freeradius-server/3.2.6_2/etc/raddb/sites-enabled/default including configuration file /opt/homebrew/Cellar/freeradius-server/3.2.6_2/etc/raddb/sites-enabled/inner-tunnel main { name = "radiusd" prefix = "/opt/homebrew/Cellar/freeradius-server/3.2.6_2" localstatedir = "/opt/homebrew/var" sbindir = "/opt/homebrew/Cellar/freeradius-server/3.2.6_2/bin" logdir = "/opt/homebrew/var/log/radius" run_dir = "/opt/homebrew/var/run/radiusd" libdir = "/opt/homebrew/Cellar/freeradius-server/3.2.6_2/lib" radacctdir = "/opt/homebrew/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 proxy_dedup_window = 1 cleanup_delay = 5 max_requests = 16384 postauth_client_lost = no pidfile = "/opt/homebrew/var/run/radiusd/radiusd.pid" checkrad = "/opt/homebrew/Cellar/freeradius-server/3.2.6_2/bin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes require_message_authenticator = "auto" limit_proxy_state = "auto" allow_vulnerable_openssl = "no" } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { nonblock = no ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Shared secret for client localhost is short, and likely can be broken by an attacker. client localhost_ipv6 { ipv6addr = ::1 secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Shared secret for client localhost_ipv6 is short, and likely can be broken by an attacker. Found debugger attached # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Autz-Type = New-TLS-Connection radiusd: #### Instantiating modules #### modules { # Loaded module rlm_sql # Loading module "sql" from file /opt/homebrew/Cellar/freeradius-server/3.2.6_2/etc/raddb/mods-available/sql sql { driver = "rlm_sql_mysql" server = "localhost" port = 3306 login = "radius" password = <<< secret >>> radius_db = "radius" read_groups = yes read_profiles = yes read_clients = no delete_stale_sessions = yes sql_user_name = "%{User-Name}" default_user_profile = "" client_query = "SELECT id, nasname, shortname, type, secret, server FROM nas" authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id" authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id" group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority" simul_count_query = "SELECT COUNT(*) FROM radacct a LEFT OUTER JOIN nasreload n USING (nasipaddress) WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL AND (a.acctstarttime > n.reloadtime OR n.reloadtime IS NULL)" simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct a LEFT OUTER JOIN nasreload n USING (nasipaddress) WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL AND (a.acctstarttime > n.reloadtime OR n.reloadtime IS NULL)" safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" auto_escape = no accounting { reference = "%{tolower:type.%{%{Acct-Status-Type}:-%{Request-Processing-Stage}}.query}" type { accounting-on { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), acctsessiontime = '%{%{integer:Event-Timestamp}:-%l}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l})" } accounting-off { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), acctsessiontime = '%{%{integer:Event-Timestamp}:-%l}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l})" } start { query = "INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_startconnectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, framedipv6address, framedipv6prefix, framedinterfaceid, delegatedipv6prefix ) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}', FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{Framed-IPv6-Address}', '%{Framed-IPv6-Prefix}', '%{Framed-Interface-Id}', '%{Delegated-IPv6-Prefix}' )" } interim-update { query = "UPDATE radacct SET acctupdatetime = (@acctupdatetime_old:=acctupdatetime), acctupdatetime = FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), acctinterval = %{%{integer:Event-Timestamp}:-%l} - UNIX_TIMESTAMP(@acctupdatetime_old), framedipaddress = '%{Framed-IP-Address}', framedipv6address = '%{Framed-IPv6-Address}', framedipv6prefix = '%{Framed-IPv6-Prefix}', framedinterfaceid = '%{Framed-Interface-Id}', delegatedipv6prefix = '%{Delegated-IPv6-Prefix}', acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'" } stop { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'" } } } post-auth { reference = ".query" query = "INSERT INTO radpostauth (username, pass, reply, authdate ) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S.%M' )" } } Could not link driver rlm_sql_mysql: dlopen(/opt/homebrew/Cellar/freeradius-server/3.2.6_2/lib/rlm_sql_mysql.dylib, 0x0006): tried: '/opt/homebrew/Cellar/freeradius-server/3.2.6_2/lib/rlm_sql_mysql.dylib' (no such file), '/System/Volumes/Preboot/Cryptexes/OS/opt/homebrew/Cellar/freeradius-server/3.2.6_2/lib/rlm_sql_mysql.dylib' (no such file), '/opt/homebrew/Cellar/freeradius-server/3.2.6_2/lib/rlm_sql_mysql.dylib' (no such file) Make sure it (and all its dependent libraries!) are in the search path of your system's ld /opt/homebrew/Cellar/freeradius-server/3.2.6_2/etc/raddb/mods-available/sql[27]: Instantiation failed for module "sql" I checked, and there's no rlm_sql_mysql in the directory. Please help me with this. Thanks.

2 1