- Freeradius-Users - lists.freeradius.org

Re: Freeradius-Users Digest, Vol 167, Issue 46
by Imdad Hasan 18 Mar '19

18 Mar '19

Dear All, I see one application that communicate radius with client without any IP, But with the client (NAS) MAC Address OR Serial Key. I don't understand how was that possible?? Warm Regards Imdad Hasan On Mon, Mar 18, 2019 at 5:47 PM < freeradius-users-request(a)lists.freeradius.org> wrote: > Send Freeradius-Users mailing list submissions to > freeradius-users(a)lists.freeradius.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.freeradius.org/mailman/listinfo/freeradius-users > or, via email, send a message with subject or body 'help' to > freeradius-users-request(a)lists.freeradius.org > > You can reach the person managing the list at > freeradius-users-owner(a)lists.freeradius.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Freeradius-Users digest..." > > > Today's Topics: > > 1. Re: What is the current status and roadmap for FreeRadius? > (Alan DeKok) > 2. Connect Client to freeradius without Real(Public) IP (Imdad Hasan) > 3. Re: What is the current status and roadmap for FreeRadius? > (Adam Majer) > 4. Re: Connect Client to freeradius without Real(Public) IP > (Alan DeKok) > 5. AW: What is the current status and roadmap for FreeRadius? > (Christian Kaufmann) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Mon, 18 Mar 2019 07:03:59 -0400 > From: Alan DeKok <aland(a)deployingradius.com> > To: FreeRadius users mailing list > <freeradius-users(a)lists.freeradius.org> > Subject: Re: What is the current status and roadmap for FreeRadius? > Message-ID: <72876092-8492-4759-A722-518190B18D0E(a)deployingradius.com> > Content-Type: text/plain; charset=us-ascii > > On Mar 18, 2019, at 5:00 AM, Alex Perez-Mendez < > Alex.Perez-Mendez(a)jisc.ac.uk> wrote > > > > Joshua, let me tell you that you were indeed disrespectful with your > > comments (I'm not saying you did it on purpose though, but definitely > > you were). > > There's absolutely no question he intended to be disrespectful. While > he didn't use bad language, he *did* intend to lord it over everyone, and > to show us the error of our ways. > > This is classic narcissism. > > I've seen this many times on this list, and my personal life. These > people are toxic, and need to be shut down immediately. > > One of my favourites years ago was a someone who responded to that > shutdown with "Oh yeah? I WAS going to involve you people in my new > project that would make millions, but now I'm not going to!" > > That's a response so delusional that you just can't argue with it. > > > Bringing this discussion into the personal space only demonstrates a low > > value as a person. > > For me, this comment ends any further technical discussion. > > I guarantee you, he had nothing technical to contribute. The only > contribution in that conversation would have been us educating him that his > delusions were wrong. > > Alan DeKok. > > > > > ------------------------------ > > Message: 2 > Date: Mon, 18 Mar 2019 17:16:45 +0530 > From: Imdad Hasan <imdadalikadiwala0(a)gmail.com> > To: freeradius-users(a)lists.freeradius.org > Subject: Connect Client to freeradius without Real(Public) IP > Message-ID: > < > CAPidyMU6S+7B2S7smAff0eMMzOL41KwhdScJtKt_-rj95n_CuQ(a)mail.gmail.com> > Content-Type: text/plain; charset="UTF-8" > > Dear all, > > In this case i have freeradius server which have Public IP LIke x.y.y.x. > But i have one client (Like Mikrotik) which have not Public IP. So, in this > scenario can i communicate the client with freeradius for authentication > and accounting?? > > Warm Regards > Imdad Hasan > > > ------------------------------ > > Message: 3 > Date: Mon, 18 Mar 2019 12:47:03 +0100 > From: Adam Majer <amajer(a)suse.de> > To: freeradius-users(a)lists.freeradius.org > Subject: Re: What is the current status and roadmap for FreeRadius? > Message-ID: <9811e5f2-aec0-89ed-fb13-31e2f9d4a265(a)suse.de> > Content-Type: text/plain; charset=utf-8; format=flowed > > On 3/18/19 12:03 PM, Alan DeKok wrote: > > One of my favourites years ago was a someone who responded to that > > shutdown with "Oh yeah? I WAS going to involve you people in my new > > project that would make millions, but now I'm not going to!" > > > > That's a response so delusional that you just can't argue with it. > > The worse "customers" are the ones that get their software for free ;) > Somehow they always feel entitled to the most with the least > constructive input. > > Generally you get these comments about language or libraries from > someone in or right after school and while they haven't actually > contributed anything to maintaining any long term project. I think it > just shows complete ignorance, not malice. > > Anyway, thank you for maintaining FreeRADIUS. Your expertise (and the > other maintainers) is highly appreciated here. > > - Adam > > PS. All opinions are my own :) > > > ------------------------------ > > Message: 4 > Date: Mon, 18 Mar 2019 08:09:27 -0400 > From: Alan DeKok <aland(a)deployingradius.com> > To: FreeRadius users mailing list > <freeradius-users(a)lists.freeradius.org> > Subject: Re: Connect Client to freeradius without Real(Public) IP > Message-ID: <89F2040F-5B6A-4D06-80EA-46CC95CCE7C6(a)deployingradius.com> > Content-Type: text/plain; charset=us-ascii > > On Mar 18, 2019, at 7:46 AM, Imdad Hasan <imdadalikadiwala0(a)gmail.com> > wrote: > > > > In this case i have freeradius server which have Public IP LIke x.y.y.x. > > But i have one client (Like Mikrotik) which have not Public IP. So, in > this > > scenario can i communicate the client with freeradius for authentication > > and accounting?? > > RADIUS needs *some* IP address for the client. If the client is behind > a NAT gateway, you can use the IP address of the NAT gateway. > > Alan DeKok. > > > > > ------------------------------ > > Message: 5 > Date: Mon, 18 Mar 2019 12:17:15 +0000 > From: Christian Kaufmann <c.kaufmann(a)umwelt-campus.de> > To: "'FreeRadius users mailing list'" > <freeradius-users(a)lists.freeradius.org> > Subject: AW: What is the current status and roadmap for FreeRadius? > Message-ID: <1eb06d736b69428ba9640b7f4ad758ae(a)exc-7.umwelt-campus.de> > Content-Type: text/plain; charset="utf-8" > > > Anyway, thank you for maintaining FreeRADIUS. Your expertise (and the > > other maintainers) is highly appreciated here. > > Full ACK from here. > > Alan, I have no idea how you always manage to reply those offending people > in a professional manner :) Kudos for that. > > Thanks to the entire FR team for maintaining this great piece of software. > Keep up the good work. > > Kind regards > Chris > > > -----Ursprüngliche Nachricht----- > > Von: Freeradius-Users <freeradius-users-bounces+c.kaufmann=umwelt- > > campus.de(a)lists.freeradius.org> Im Auftrag von Adam Majer > > Gesendet: Montag, 18. März 2019 12:47 > > An: freeradius-users(a)lists.freeradius.org > > Betreff: Re: What is the current status and roadmap for FreeRadius? > > > > On 3/18/19 12:03 PM, Alan DeKok wrote: > > > One of my favourites years ago was a someone who responded to that > > > shutdown with "Oh yeah? I WAS going to involve you people in my new > > > project that would make millions, but now I'm not going to!" > > > > > > That's a response so delusional that you just can't argue with it. > > > > The worse "customers" are the ones that get their software for free ;) > > Somehow they always feel entitled to the most with the least constructive > > input. > > > > Generally you get these comments about language or libraries from > > someone in or right after school and while they haven't actually > contributed > > anything to maintaining any long term project. I think it just shows > complete > > ignorance, not malice. > > > > Anyway, thank you for maintaining FreeRADIUS. Your expertise (and the > > other maintainers) is highly appreciated here. > > > > - Adam > > > > PS. All opinions are my own :) > > - > > List info/subscribe/unsubscribe? See > > http://www.freeradius.org/list/users.html >

1 0

Connect Client to freeradius without Real(Public) IP
by Imdad Hasan 18 Mar '19

18 Mar '19

Dear all, In this case i have freeradius server which have Public IP LIke x.y.y.x. But i have one client (Like Mikrotik) which have not Public IP. So, in this scenario can i communicate the client with freeradius for authentication and accounting?? Warm Regards Imdad Hasan

2 1

dhcp.relay is not working in version 4.0.0 master
by Katuri, Vikram 18 Mar '19

18 Mar '19

Hi Team, I am trying to setup a freeradius DHCP Load balancer with config given in https://github.com/FreeRADIUS/freeradius-server/blob/master/raddb/sites-ava… , and I am facing trouble doing it. I am using 4.0.0 version and the git checkout tag is 5309825993e5c61a4b2551d9799ba41ff141478c Please find the 'radius -X' o/p below # /usr/local/sbin/radiusd -X Info : FreeRADIUS Version 4.0.0 Info : Copyright 1999-2019 The FreeRADIUS server project and contributors Info : There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A Info : PARTICULAR PURPOSE Info : You may redistribute copies of FreeRADIUS under the terms of the Info : GNU General Public License Info : For more information about these matters, see the file named COPYRIGHT Info : Starting - reading configuration files ... Debug : Including dictionary file "/usr/local/etc/raddb/dictionary" Debug : including configuration file /usr/local/etc/raddb/radiusd.conf Debug : including configuration file /usr/local/etc/raddb/clients.conf Debug : Including files in directory "/usr/local/etc/raddb/mods-enabled/" Debug : including configuration file /usr/local/etc/raddb/mods-enabled/always Debug : including configuration file /usr/local/etc/raddb/mods-enabled/attr_filter Debug : including configuration file /usr/local/etc/raddb/mods-enabled/cache_eap Debug : including configuration file /usr/local/etc/raddb/mods-enabled/chap Debug : including configuration file /usr/local/etc/raddb/mods-enabled/client Debug : including configuration file /usr/local/etc/raddb/mods-enabled/detail Debug : including configuration file /usr/local/etc/raddb/mods-enabled/detail.log Debug : including configuration file /usr/local/etc/raddb/mods-enabled/dhcpv4 Debug : including configuration file /usr/local/etc/raddb/mods-enabled/digest Debug : including configuration file /usr/local/etc/raddb/mods-enabled/echo Debug : including configuration file /usr/local/etc/raddb/mods-enabled/escape Debug : including configuration file /usr/local/etc/raddb/mods-enabled/exec Debug : including configuration file /usr/local/etc/raddb/mods-enabled/expiration Debug : including configuration file /usr/local/etc/raddb/mods-enabled/expr Debug : including configuration file /usr/local/etc/raddb/mods-enabled/files Debug : including configuration file /usr/local/etc/raddb/mods-enabled/linelog Debug : including configuration file /usr/local/etc/raddb/mods-enabled/logintime Debug : including configuration file /usr/local/etc/raddb/mods-enabled/mschap Debug : including configuration file /usr/local/etc/raddb/mods-enabled/ntlm_auth Debug : including configuration file /usr/local/etc/raddb/mods-enabled/pap Debug : including configuration file /usr/local/etc/raddb/mods-enabled/passwd Debug : including configuration file /usr/local/etc/raddb/mods-enabled/radius Debug : including configuration file /usr/local/etc/raddb/mods-enabled/radutmp Debug : including configuration file /usr/local/etc/raddb/mods-enabled/redis_ippool Debug : including configuration file /usr/local/etc/raddb/mods-enabled/sradutmp Debug : including configuration file /usr/local/etc/raddb/mods-enabled/stats Debug : including configuration file /usr/local/etc/raddb/mods-enabled/unix Debug : including configuration file /usr/local/etc/raddb/mods-enabled/unpack Debug : including configuration file /usr/local/etc/raddb/mods-enabled/utf8 Debug : Including files in directory "/usr/local/etc/raddb/policy.d/" Debug : including configuration file /usr/local/etc/raddb/policy.d/abfab-tr Debug : including configuration file /usr/local/etc/raddb/policy.d/accounting Debug : including configuration file /usr/local/etc/raddb/policy.d/canonicalization Debug : including configuration file /usr/local/etc/raddb/policy.d/control Debug : including configuration file /usr/local/etc/raddb/policy.d/cui Debug : including configuration file /usr/local/etc/raddb/policy.d/debug Debug : including configuration file /usr/local/etc/raddb/policy.d/dhcp Debug : including configuration file /usr/local/etc/raddb/policy.d/eap Debug : including configuration file /usr/local/etc/raddb/policy.d/filter Debug : including configuration file /usr/local/etc/raddb/policy.d/operator-name Debug : including configuration file /usr/local/etc/raddb/policy.d/time Debug : including configuration file /usr/local/etc/raddb/policy.d/vendor Debug : Including files in directory "/usr/local/etc/raddb/sites-enabled/" Debug : including configuration file /usr/local/etc/raddb/sites-enabled/dhcp.relay Error : src/lib/server/cf_file.c[1550]: No namespace set for virtual server Error : src/lib/server/cf_file.c[1550]: Add namespace = <protocol> inside listen (null) { ... } section Error : /usr/local/etc/raddb/sites-enabled/dhcp.relay[12]: Failed allocating memory for section Error : Failed parsing configuration file "/usr/local/etc/raddb/sites-enabled/dhcp.relay" Error : Failed parsing configuration file "/usr/local/etc/raddb/radiusd.conf" Error : Error reading or parsing /usr/local/etc/raddb/radiusd.conf If it the namespace, please let us know what namespace to be used for dhcp.relay .

2 1

FreeRADIUS as accounting relay for syslog
by R3DNano 17 Mar '19

17 Mar '19

There are some radius servers on my network that can't send their accounting information to syslog servers (can't talk to syslog, or something, don't know the specifics), so I was thinking if it might be possible to use my FreeRADIUS setup as a relay to do this job. The idea is that these servers could send me their accounting information and then use rsyslog to forward the accounting information to another remote syslog server. So far, I have been able to send local accounting to the remote syslog server using rsyslog and a local facility. Is this a good practice? Any particular tips on how to proceed? Thanks!

3 3

radius accounting not starting....
by Somanath Mishra 17 Mar '19

17 Mar '19

Hi Team, i facing one problem in accounting part. So after authrization accounting part is not starting. i am getting data in radpostauth "Accept-Accept" ,but in radacct there is no data. here is debugging logs: freeradius | Ready to process requests freeradius | (0) Received Access-Request Id 153 from 192.168.0.4:47212 to 172.25.0.101:1812 length 182 freeradius | (0) Service-Type = Login-User freeradius | (0) Framed-MTU = 1250 freeradius | (0) User-Name = "12347@@TM11" freeradius | (0) User-Password = "b3957233dd5294cbf47d95fb3f584239" freeradius | (0) Calling-Station-Id = "9c:4e:36:9c:71:18" freeradius | (0) Called-Station-Id = "00:0c:29:67:6d:ec" freeradius | (0) Connect-Info = "CONNECT Unknown Radio" freeradius | (0) Framed-IP-Address = 10.0.1.24 freeradius | (0) NAS-IP-Address = 192.168.0.4 freeradius | (0) NAS-Port-Type = Wireless-802.11 freeradius | (0) NAS-Port = 0 freeradius | (0) Message-Authenticator = 0xda54bc22f970f04a4435875330451229 freeradius | (0) # Executing section authorize from file /etc/freeradius/sites-enabled/default freeradius | (0) authorize { freeradius | (0) policy filter_username { freeradius | (0) if (&User-Name) { freeradius | (0) if (&User-Name) -> TRUE freeradius | (0) if (&User-Name) { freeradius | (0) if (&User-Name =~ / /) { freeradius | (0) if (&User-Name =~ / /) -> FALSE freeradius | (0) if (&User-Name =~ /\.\./ ) { freeradius | (0) if (&User-Name =~ /\.\./ ) -> FALSE freeradius | (0) if (&User-Name =~ /\.$/) { freeradius | (0) if (&User-Name =~ /\.$/) -> FALSE freeradius | (0) if (&User-Name =~ /(a)\./) { freeradius | (0) if (&User-Name =~ /(a)\./) -> FALSE freeradius | (0) } # if (&User-Name) = notfound freeradius | (0) } # policy filter_username = notfound freeradius | (0) [preprocess] = ok freeradius | (0) [chap] = noop freeradius | (0) [mschap] = noop freeradius | (0) [digest] = noop freeradius | (0) suffix: Checking for suffix after "@" freeradius | (0) suffix: Looking up realm "TM11" for User-Name = "12347@@TM11" freeradius | (0) suffix: No such realm "TM11" freeradius | (0) [suffix] = noop freeradius | (0) eap: No EAP-Message, not doing EAP freeradius | (0) [eap] = noop freeradius | (0) [files] = noop freeradius | (0) sql: EXPAND %{User-Name} freeradius | (0) sql: --> 12347@@TM11 freeradius | (0) sql: SQL-User-Name set to '12347@@TM11' freeradius | rlm_sql (sql): Closing connection (1): Hit idle_timeout, was idle for 305 seconds freeradius | rlm_sql_mysql: Socket destructor called, closing socket freeradius | rlm_sql (sql): Closing connection (2): Hit idle_timeout, was idle for 305 seconds freeradius | rlm_sql_mysql: Socket destructor called, closing socket freeradius | rlm_sql (sql): Closing connection (3): Hit idle_timeout, was idle for 305 seconds freeradius | rlm_sql_mysql: Socket destructor called, closing socket freeradius | rlm_sql (sql): Closing connection (4): Hit idle_timeout, was idle for 305 seconds freeradius | rlm_sql (sql): You probably need to lower "min" freeradius | rlm_sql_mysql: Socket destructor called, closing socket freeradius | rlm_sql (sql): Closing connection (0): Hit idle_timeout, was idle for 305 seconds freeradius | rlm_sql (sql): You probably need to lower "min" freeradius | rlm_sql_mysql: Socket destructor called, closing socket freeradius | rlm_sql (sql): Closing connection (5): Hit idle_timeout, was idle for 305 seconds freeradius | rlm_sql (sql): You probably need to lower "min" freeradius | rlm_sql_mysql: Socket destructor called, closing socket freeradius | rlm_sql (sql): 0 of 0 connections in use. You may need to increase "spare" freeradius | rlm_sql (sql): Opening additional connection (6), 1 of 32 pending slots used freeradius | rlm_sql_mysql: Starting connect to MySQL server freeradius | rlm_sql_mysql: Connected to database 'radius' on 172.25.0.100 via TCP/IP, server version 5.7.25, protocol version 10 freeradius | rlm_sql (sql): Reserved connection (6) freeradius | (0) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id freeradius | (0) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = '12347@@TM11' ORDER BY id freeradius | (0) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '12347@@TM11' ORDER BY id freeradius | (0) sql: User found in radcheck table freeradius | (0) sql: Conditional check items matched, merging assignment check items freeradius | (0) sql: Cleartext-Password := "b3957233dd5294cbf47d95fb3f584239" freeradius | (0) sql: EXPAND SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id freeradius | (0) sql: --> SELECT id, username, attribute, value, op FROM radreply WHERE username = '12347@@TM11' ORDER BY id freeradius | (0) sql: Executing select query: SELECT id, username, attribute, value, op FROM radreply WHERE username = '12347@@TM11' ORDER BY id freeradius | (0) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority freeradius | (0) sql: --> SELECT groupname FROM radusergroup WHERE username = '12347@@TM11' ORDER BY priority freeradius | (0) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = '12347@@TM11' ORDER BY priority freeradius | (0) sql: User found in the group table freeradius | (0) sql: EXPAND SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id freeradius | (0) sql: --> SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = 'allowall' ORDER BY id freeradius | (0) sql: Executing select query: SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = 'allowall' ORDER BY id freeradius | (0) sql: Group "allowall": Conditional check items matched freeradius | (0) sql: Group "allowall": Merging assignment check items freeradius | (0) sql: Framed-Protocol := 0 freeradius | (0) sql: EXPAND SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id freeradius | (0) sql: --> SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = 'allowall' ORDER BY id freeradius | (0) sql: Executing select query: SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = 'allowall' ORDER BY id freeradius | (0) sql: Group "allowall": Merging reply items freeradius | rlm_sql (sql): Released connection (6) freeradius | Need 2 more connections to reach min connections (3) freeradius | rlm_sql (sql): Opening additional connection (7), 1 of 31 pending slots used freeradius | rlm_sql_mysql: Starting connect to MySQL server freeradius | rlm_sql_mysql: Connected to database 'radius' on 172.25.0.100 via TCP/IP, server version 5.7.25, protocol version 10 freeradius | (0) [sql] = ok freeradius | (0) [expiration] = noop freeradius | (0) [logintime] = noop freeradius | (0) [pap] = updated freeradius | (0) } # authorize = updated freeradius | (0) Found Auth-Type = PAP freeradius | (0) # Executing group from file /etc/freeradius/sites-enabled/default freeradius | (0) Auth-Type PAP { freeradius | (0) pap: Login attempt with password freeradius | (0) pap: Comparing with "known good" Cleartext-Password freeradius | (0) pap: User authenticated successfully freeradius | (0) [pap] = ok freeradius | (0) } # Auth-Type PAP = ok freeradius | (0) # Executing section post-auth from file /etc/freeradius/sites-enabled/default freeradius | (0) post-auth { freeradius | (0) update { freeradius | (0) No attributes updated freeradius | (0) } # update = noop freeradius | (0) sql: EXPAND .query freeradius | (0) sql: --> .query freeradius | (0) sql: Using query template 'query' freeradius | rlm_sql (sql): Reserved connection (6) freeradius | (0) sql: EXPAND %{User-Name} freeradius | (0) sql: --> 12347@@TM11 freeradius | (0) sql: SQL-User-Name set to '12347@@TM11' freeradius | (0) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S') freeradius | (0) sql: --> INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '12347@@TM11', 'b3957233dd5294cbf47d95fb3f584239', 'Access-Accept', '2019-03-15 13:18:27') freeradius | (0) sql: Executing query: INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '12347@@TM11', 'b3957233dd5294cbf47d95fb3f584239', 'Access-Accept', '2019-03-15 13:18:27') freeradius | (0) sql: SQL query returned: success freeradius | (0) sql: 1 record(s) updated freeradius | rlm_sql (sql): Released connection (6) freeradius | (0) [sql] = ok freeradius | (0) [exec] = noop freeradius | (0) policy remove_reply_message_if_eap { freeradius | (0) if (&reply:EAP-Message && &reply:Reply-Message) { freeradius | (0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE freeradius | (0) else { freeradius | (0) [noop] = noop freeradius | (0) } # else = noop freeradius | (0) } # policy remove_reply_message_if_eap = noop freeradius | (0) } # post-auth = ok freeradius | (0) Sent Access-Accept Id 153 from 172.25.0.101:1812 to 192.168.0.4:47212 length 0 freeradius | (0) Finished request freeradius | Waking up in 4.9 seconds. freeradius | (0) Cleaning up request packet ID 153 with timestamp +305 freeradius | Ready to process requests please help me on this. thanks in advance.

3 10

session timeout eval random only during night hours
by Krzysztof Drewicz 16 Mar '19

16 Mar '19

Hello, basically what i have is: Session-Timeout = 24*60*60 (secons so = one day) what i whould like to eval this timeout every time user gets ack/ok reply to be (randomly) in hours let's say 0200 - 0600 hours. any quick hint? Don't want to reinvent the wheel or use some cannons to shut at butter fly. maybe someone has some advice? thanks.

4 6

Re: FR 3.0.13, reply of attributes missing
by Jürgen Northe 15 Mar '19

15 Mar '19

Sorry for the very late answer. I have appended two results: The first containing also the wanted attributes Auth-Type, Tunnel-Private-Group-Id, Tunnel-Type an Tunnel-Medium-Type in the LDAP user entry and the second one has these informations in a radiusProfileDN cn=PRODLAN,ou=VLAN,ou=profiles,ou=radius,dc=compend,dc=com pointing to a ObjectClass=radiusprofie containig the same attributes with the same values. In the debug output it looks like the profile is not found / traversed. I have read the ldap module and the wikies and tried out some variations in the group with filter and update section but nothing seems to find and replay these profile entries. Every target-oriented hint to the exact place where you control it would be helpful. FreeRADIUS Version 3.0.13 Copyright (C) 1999-2017 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/raddb/dictionary including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/mods-enabled/ including configuration file /etc/raddb/mods-enabled/always including configuration file /etc/raddb/mods-enabled/attr_filter including configuration file /etc/raddb/mods-enabled/cache_eap including configuration file /etc/raddb/mods-enabled/chap including configuration file /etc/raddb/mods-enabled/date including configuration file /etc/raddb/mods-enabled/detail including configuration file /etc/raddb/mods-enabled/detail.log including configuration file /etc/raddb/mods-enabled/dhcp including configuration file /etc/raddb/mods-enabled/digest including configuration file /etc/raddb/mods-enabled/dynamic_clients including configuration file /etc/raddb/mods-enabled/eap including configuration file /etc/raddb/mods-enabled/echo including configuration file /etc/raddb/mods-enabled/exec including configuration file /etc/raddb/mods-enabled/expiration including configuration file /etc/raddb/mods-enabled/expr including configuration file /etc/raddb/mods-enabled/files including configuration file /etc/raddb/mods-enabled/linelog including configuration file /etc/raddb/mods-enabled/logintime including configuration file /etc/raddb/mods-enabled/mschap including configuration file /etc/raddb/mods-enabled/ntlm_auth including configuration file /etc/raddb/mods-enabled/pap including configuration file /etc/raddb/mods-enabled/passwd including configuration file /etc/raddb/mods-enabled/preprocess including configuration file /etc/raddb/mods-enabled/radutmp including configuration file /etc/raddb/mods-enabled/realm including configuration file /etc/raddb/mods-enabled/replicate including configuration file /etc/raddb/mods-enabled/soh including configuration file /etc/raddb/mods-enabled/sradutmp including configuration file /etc/raddb/mods-enabled/unix including configuration file /etc/raddb/mods-enabled/unpack including configuration file /etc/raddb/mods-enabled/utf8 including configuration file /etc/raddb/mods-enabled/redundant_ldap including files in directory /etc/raddb/policy.d/ including configuration file /etc/raddb/policy.d/accounting including configuration file /etc/raddb/policy.d/control including configuration file /etc/raddb/policy.d/cui including configuration file /etc/raddb/policy.d/debug including configuration file /etc/raddb/policy.d/dhcp including configuration file /etc/raddb/policy.d/eap including configuration file /etc/raddb/policy.d/filter including configuration file /etc/raddb/policy.d/operator-name including configuration file /etc/raddb/policy.d/canonicalization including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/inner-tunnel main { security { user = "radiusd" group = "radiusd" allow_core_dumps = no } name = "radiusd" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" } main { name = "radiusd" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" libdir = "/usr/lib64/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = yes auth_goodpass = yes colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 192.168.178.7/32 { ipaddr = 192.168.178.7 require_message_authenticator = no secret = <<< secret >>> shortname = "SWSG1AP1-7" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_always # Loading module "reject" from file /etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_chap # Loading module "chap" from file /etc/raddb/mods-enabled/chap # Loaded module rlm_date # Loading module "date" from file /etc/raddb/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" } # Loaded module rlm_detail # Loading module "detail" from file /etc/raddb/mods-enabled/detail detail { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "auth_log" from file /etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_dhcp # Loading module "dhcp" from file /etc/raddb/mods-enabled/dhcp # Loaded module rlm_digest # Loading module "digest" from file /etc/raddb/mods-enabled/digest # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_eap # Loading module "eap" from file /etc/raddb/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_exec # Loading module "echo" from file /etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loading module "exec" from file /etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/raddb/mods-enabled/expiration # Loaded module rlm_expr # Loading module "expr" from file /etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_files # Loading module "files" from file /etc/raddb/mods-enabled/files files { filename = "/etc/raddb/mods-config/files/authorize" acctusersfile = "/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy" } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/raddb/mods-enabled/linelog linelog { filename = "/var/log/radius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/var/log/radius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loading module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_pap # Loading module "pap" from file /etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups" hints = "/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/raddb/mods-enabled/replicate # Loaded module rlm_soh # Loading module "soh" from file /etc/raddb/mods-enabled/soh soh { dhcp = yes } # Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_unix # Loading module "unix" from file /etc/raddb/mods-enabled/unix unix { radwtmp = "/var/log/radius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_unpack # Loading module "unpack" from file /etc/raddb/mods-enabled/unpack # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/raddb/mods-enabled/utf8 # Loaded module rlm_ldap # Loading module "ldap1" from file /etc/raddb/mods-enabled/redundant_ldap ldap ldap1 { server = "srv1-215" identity = "cn=Manager,dc=compend,dc=com" password = <<< secret >>> sasl { } user { scope = "sub" access_positive = yes sasl { } } group { filter = "(objectClass=organizationalRole)" scope = "sub" name_attribute = "cn" membership_attribute = "radiusProfileDN" membership_filter = "(|(member=%{control:Ldap-UserDn})(cn=%{%{Stripped-User-Name}:-%{User-Name}}))" cacheable_name = no cacheable_dn = no } client { filter = "(objectClass=radiusClient)" scope = "sub" base_dn = "dc=compend,dc=com" } profile { } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 1 res_timeout = 10 srv_timelimit = 3 idle = 60 probes = 3 interval = 3 } tls { ca_file = "/etc/raddb/certs/radldapCA.crt" certificate_file = "/etc/raddb/certs/srv1-215.crt" private_key_file = "/etc/raddb/certs/srv1-215.key" random_file = "/dev/urandom" start_tls = yes require_cert = "never" } } Creating attribute ldap1-LDAP-Group # Loading module "ldap2" from file /etc/raddb/mods-enabled/redundant_ldap ldap ldap2 { server = "radldap2-216" identity = "cn=Manager,dc=compend,dc=com" password = <<< secret >>> sasl { } user { scope = "sub" access_positive = yes sasl { } } group { filter = "(objectClass=posixGroup)" scope = "sub" name_attribute = "cn" membership_attribute = "radiusProfileDN" cacheable_name = no cacheable_dn = no } client { filter = "(objectClass=radiusClient)" scope = "sub" base_dn = "dc=compend,dc=com" } profile { } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 1 res_timeout = 10 srv_timelimit = 3 idle = 60 probes = 3 interval = 3 } tls { ca_file = "/etc/raddb/certs/radldapCA.crt" certificate_file = "/etc/raddb/certs/radldap2-216.crt" private_key_file = "/etc/raddb/certs/radldap2-216.key" random_file = "/dev/urandom" start_tls = yes require_cert = "never" } } Creating attribute ldap2-LDAP-Group instantiate { # Instantiating module "ldap1" from file /etc/raddb/mods-enabled/redundant_ldap rlm_ldap: libldap vendor: OpenLDAP, version: 20444 accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } rlm_ldap (ldap1): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_ldap (ldap1): Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (ldap1): Connecting to ldap://srv1-215:389 TLSMC: MozNSS compatibility interception begins. tlsmc_convert: INFO: cannot open the NSS DB, expecting PEM configuration is present. tlsmc_intercept_initialization: INFO: successfully intercepted TLS initialization. Continuing with OpenSSL only. TLSMC: MozNSS compatibility interception ends. rlm_ldap (ldap1): Waiting for bind result... rlm_ldap (ldap1): Bind successful rlm_ldap (ldap1): Opening additional connection (1), 1 of 31 pending slots used rlm_ldap (ldap1): Connecting to ldap://srv1-215:389 TLSMC: MozNSS compatibility interception begins. tlsmc_convert: INFO: cannot open the NSS DB, expecting PEM configuration is present. tlsmc_intercept_initialization: INFO: successfully intercepted TLS initialization. Continuing with OpenSSL only. TLSMC: MozNSS compatibility interception ends. rlm_ldap (ldap1): Waiting for bind result... rlm_ldap (ldap1): Bind successful rlm_ldap (ldap1): Opening additional connection (2), 1 of 30 pending slots used rlm_ldap (ldap1): Connecting to ldap://srv1-215:389 TLSMC: MozNSS compatibility interception begins. tlsmc_convert: INFO: cannot open the NSS DB, expecting PEM configuration is present. tlsmc_intercept_initialization: INFO: successfully intercepted TLS initialization. Continuing with OpenSSL only. TLSMC: MozNSS compatibility interception ends. rlm_ldap (ldap1): Waiting for bind result... rlm_ldap (ldap1): Bind successful rlm_ldap (ldap1): Opening additional connection (3), 1 of 29 pending slots used rlm_ldap (ldap1): Connecting to ldap://srv1-215:389 TLSMC: MozNSS compatibility interception begins. tlsmc_convert: INFO: cannot open the NSS DB, expecting PEM configuration is present. tlsmc_intercept_initialization: INFO: successfully intercepted TLS initialization. Continuing with OpenSSL only. TLSMC: MozNSS compatibility interception ends. rlm_ldap (ldap1): Waiting for bind result... rlm_ldap (ldap1): Bind successful rlm_ldap (ldap1): Opening additional connection (4), 1 of 28 pending slots used rlm_ldap (ldap1): Connecting to ldap://srv1-215:389 TLSMC: MozNSS compatibility interception begins. tlsmc_convert: INFO: cannot open the NSS DB, expecting PEM configuration is present. tlsmc_intercept_initialization: INFO: successfully intercepted TLS initialization. Continuing with OpenSSL only. TLSMC: MozNSS compatibility interception ends. rlm_ldap (ldap1): Waiting for bind result... rlm_ldap (ldap1): Bind successful # Instantiating module "ldap2" from file /etc/raddb/mods-enabled/redundant_ldap accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } rlm_ldap (ldap2): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_ldap (ldap2): Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (ldap2): Connecting to ldap://radldap2-216:389 TLSMC: MozNSS compatibility interception begins. tlsmc_convert: INFO: cannot open the NSS DB, expecting PEM configuration is present. tlsmc_intercept_initialization: INFO: successfully intercepted TLS initialization. Continuing with OpenSSL only. TLSMC: MozNSS compatibility interception ends. rlm_ldap (ldap2): Waiting for bind result... rlm_ldap (ldap2): Bind successful rlm_ldap (ldap2): Opening additional connection (1), 1 of 31 pending slots used rlm_ldap (ldap2): Connecting to ldap://radldap2-216:389 TLSMC: MozNSS compatibility interception begins. tlsmc_convert: INFO: cannot open the NSS DB, expecting PEM configuration is present. tlsmc_intercept_initialization: INFO: successfully intercepted TLS initialization. Continuing with OpenSSL only. TLSMC: MozNSS compatibility interception ends. rlm_ldap (ldap2): Waiting for bind result... rlm_ldap (ldap2): Bind successful rlm_ldap (ldap2): Opening additional connection (2), 1 of 30 pending slots used rlm_ldap (ldap2): Connecting to ldap://radldap2-216:389 TLSMC: MozNSS compatibility interception begins. tlsmc_convert: INFO: cannot open the NSS DB, expecting PEM configuration is present. tlsmc_intercept_initialization: INFO: successfully intercepted TLS initialization. Continuing with OpenSSL only. TLSMC: MozNSS compatibility interception ends. rlm_ldap (ldap2): Waiting for bind result... rlm_ldap (ldap2): Bind successful rlm_ldap (ldap2): Opening additional connection (3), 1 of 29 pending slots used rlm_ldap (ldap2): Connecting to ldap://radldap2-216:389 TLSMC: MozNSS compatibility interception begins. tlsmc_convert: INFO: cannot open the NSS DB, expecting PEM configuration is present. tlsmc_intercept_initialization: INFO: successfully intercepted TLS initialization. Continuing with OpenSSL only. TLSMC: MozNSS compatibility interception ends. rlm_ldap (ldap2): Waiting for bind result... rlm_ldap (ldap2): Bind successful rlm_ldap (ldap2): Opening additional connection (4), 1 of 28 pending slots used rlm_ldap (ldap2): Connecting to ldap://radldap2-216:389 TLSMC: MozNSS compatibility interception begins. tlsmc_convert: INFO: cannot open the NSS DB, expecting PEM configuration is present. tlsmc_intercept_initialization: INFO: successfully intercepted TLS initialization. Continuing with OpenSSL only. TLSMC: MozNSS compatibility interception ends. rlm_ldap (ldap2): Waiting for bind result... rlm_ldap (ldap2): Bind successful } # Instantiating module "reject" from file /etc/raddb/mods-enabled/always # Instantiating module "fail" from file /etc/raddb/mods-enabled/always # Instantiating module "ok" from file /etc/raddb/mods-enabled/always # Instantiating module "handled" from file /etc/raddb/mods-enabled/always # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always # Instantiating module "noop" from file /etc/raddb/mods-enabled/always # Instantiating module "updated" from file /etc/raddb/mods-enabled/always # Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject [/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response # Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/raddb/certs" pem_file_type = yes private_key_file = "/etc/raddb/certs/srv1-215.key" certificate_file = "/etc/raddb/certs/srv1-215.crt" ca_file = "/etc/raddb/certs/radldapCA.crt" dh_file = "/etc/raddb/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = yes virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = yes proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "expiration" from file /etc/raddb/mods-enabled/expiration # Instantiating module "files" from file /etc/raddb/mods-enabled/files reading pairlist file /etc/raddb/mods-config/files/authorize reading pairlist file /etc/raddb/mods-config/files/accounting reading pairlist file /etc/raddb/mods-config/files/pre-proxy # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog # Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap # Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "preprocess" from file /etc/raddb/mods-enabled/preprocess reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /etc/raddb/mods-config/preprocess/hints # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/raddb/radiusd.conf } # server server default { # from file /etc/raddb/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/raddb/sites-enabled/inner-tunnel:331 } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on proxy address * port 45476 Listening on proxy address :: port 54184 Ready to process requests (0) Received Access-Request Id 236 from 127.0.0.1:45648 to 127.0.0.1:1812 length 103 (0) User-Name = "F6-76-61-55-16-AB" (0) User-Password = "F6-76-61-55-16-AB" (0) NAS-IP-Address = 192.168.178.215 (0) NAS-Port = 18120 (0) Message-Authenticator = 0xd33b701897d64eb52285b7fb0cb434a9 (0) # Executing section authorize from file /etc/raddb/sites-enabled/default (0) authorize { (0) policy rewrite_calling_station_id { (0) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (0) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) -> FALSE (0) else { (0) [noop] = noop (0) } # else = noop (0) } # policy rewrite_calling_station_id = noop (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "F6-76-61-55-16-AB", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: No EAP-Message, not doing EAP (0) [eap] = noop (0) [files] = noop (0) redundant redundant_ldap { rlm_ldap (ldap1): Closing connection (0): Hit idle_timeout, was idle for 133 seconds rlm_ldap (ldap1): Closing connection (1): Hit idle_timeout, was idle for 133 seconds rlm_ldap (ldap1): Closing connection (2): Hit idle_timeout, was idle for 133 seconds rlm_ldap (ldap1): You probably need to lower "min" rlm_ldap (ldap1): Closing connection (3): Hit idle_timeout, was idle for 133 seconds rlm_ldap (ldap1): You probably need to lower "min" rlm_ldap (ldap1): Closing connection (4): Hit idle_timeout, was idle for 133 seconds rlm_ldap (ldap1): You probably need to lower "min" rlm_ldap (ldap1): 0 of 0 connections in use. You may need to increase "spare" rlm_ldap (ldap1): Opening additional connection (5), 1 of 32 pending slots used rlm_ldap (ldap1): Connecting to ldap://srv1-215:389 TLSMC: MozNSS compatibility interception begins. tlsmc_convert: INFO: cannot open the NSS DB, expecting PEM configuration is present. tlsmc_intercept_initialization: INFO: successfully intercepted TLS initialization. Continuing with OpenSSL only. TLSMC: MozNSS compatibility interception ends. rlm_ldap (ldap1): Waiting for bind result... rlm_ldap (ldap1): Bind successful rlm_ldap (ldap1): Reserved connection (5) (0) ldap1: EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}}) (0) ldap1: --> (cn=F6-76-61-55-16-AB) (0) ldap1: Performing search in "dc=compend,dc=com" with filter "(cn=F6-76-61-55-16-AB)", scope "sub" (0) ldap1: Waiting for search result... (0) ldap1: User object found at DN "cn=plnas-10,cn=192.168.1.0,cn=SUBNET,cn=DHCP Config,dc=compend,dc=com" (0) ldap1: Processing user attributes (0) ldap1: control:Cleartext-Password += 'F6-76-61-55-16-AB' (0) ldap1: control:Auth-Type += Accept (0) ldap1: reply:Tunnel-Private-Group-Id := '101' (0) ldap1: reply:Tunnel-Type := VLAN (0) ldap1: reply:Tunnel-Medium-Type := IEEE-802 (0) ldap1: reply:Reply-Message := 'Hello plnas-10' rlm_ldap (ldap1): Released connection (5) Need 2 more connections to reach min connections (3) rlm_ldap (ldap1): Opening additional connection (6), 1 of 31 pending slots used rlm_ldap (ldap1): Connecting to ldap://srv1-215:389 TLSMC: MozNSS compatibility interception begins. tlsmc_convert: INFO: cannot open the NSS DB, expecting PEM configuration is present. tlsmc_intercept_initialization: INFO: successfully intercepted TLS initialization. Continuing with OpenSSL only. TLSMC: MozNSS compatibility interception ends. rlm_ldap (ldap1): Waiting for bind result... rlm_ldap (ldap1): Bind successful (0) [ldap1] = updated (0) } # redundant redundant_ldap = updated (0) if ((ok || updated) && User-Password) { (0) if ((ok || updated) && User-Password) -> TRUE (0) if ((ok || updated) && User-Password) { (0) update { (0) control:Auth-Type := Accept (0) } # update = noop (0) } # if ((ok || updated) && User-Password) = noop (0) [expiration] = noop (0) [logintime] = noop (0) pap: WARNING: Auth-Type already set. Not setting to PAP (0) [pap] = noop (0) } # authorize = updated (0) Found Auth-Type = Accept (0) Auth-Type = Accept, accepting the user (0) # Executing section post-auth from file /etc/raddb/sites-enabled/default (0) post-auth { (0) update { (0) No attributes updated (0) } # update = noop (0) [exec] = noop (0) policy remove_reply_message_if_eap { (0) if (&reply:EAP-Message && &reply:Reply-Message) { (0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (0) else { (0) [noop] = noop (0) } # else = noop (0) } # policy remove_reply_message_if_eap = noop (0) } # post-auth = noop (0) Sent Access-Accept Id 236 from 127.0.0.1:1812 to 127.0.0.1:45648 length 0 (0) Tunnel-Private-Group-Id := "101" (0) Tunnel-Type := VLAN (0) Tunnel-Medium-Type := IEEE-802 (0) Reply-Message := "Hello plnas-10" (0) Finished request Waking up in 4.9 seconds. (0) Cleaning up request packet ID 236 with timestamp +133 Ready to process requests (1) Received Access-Request Id 59 from 127.0.0.1:56961 to 127.0.0.1:1812 length 103 (1) User-Name = "00-1B-21-97-87-E2" (1) User-Password = "00-1B-21-97-87-E2" (1) NAS-IP-Address = 192.168.178.215 (1) NAS-Port = 18120 (1) Message-Authenticator = 0xb8adeeec7aeb8fd7124f48d6527d713c (1) # Executing section authorize from file /etc/raddb/sites-enabled/default (1) authorize { (1) policy rewrite_calling_station_id { (1) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (1) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) -> FALSE (1) else { (1) [noop] = noop (1) } # else = noop (1) } # policy rewrite_calling_station_id = noop (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "00-1B-21-97-87-E2", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: No EAP-Message, not doing EAP (1) [eap] = noop (1) [files] = noop (1) redundant redundant_ldap { rlm_ldap (ldap1): Closing connection (5): Hit idle_timeout, was idle for 86 seconds rlm_ldap (ldap1): You probably need to lower "min" rlm_ldap (ldap1): Closing connection (6): Hit idle_timeout, was idle for 86 seconds rlm_ldap (ldap1): You probably need to lower "min" rlm_ldap (ldap1): 0 of 0 connections in use. You may need to increase "spare" rlm_ldap (ldap1): Opening additional connection (7), 1 of 32 pending slots used rlm_ldap (ldap1): Connecting to ldap://srv1-215:389 TLSMC: MozNSS compatibility interception begins. tlsmc_convert: INFO: cannot open the NSS DB, expecting PEM configuration is present. tlsmc_intercept_initialization: INFO: successfully intercepted TLS initialization. Continuing with OpenSSL only. TLSMC: MozNSS compatibility interception ends. rlm_ldap (ldap1): Waiting for bind result... rlm_ldap (ldap1): Bind successful rlm_ldap (ldap1): Reserved connection (7) (1) ldap1: EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}}) (1) ldap1: --> (cn=00-1B-21-97-87-E2) (1) ldap1: Performing search in "dc=compend,dc=com" with filter "(cn=00-1B-21-97-87-E2)", scope "sub" (1) ldap1: Waiting for search result... (1) ldap1: User object found at DN "cn=PFPROD101-254,cn=router,cn=192.168.1.0,cn=SUBNET,cn=DHCP Config,dc=compend,dc=com" (1) ldap1: Processing user attributes (1) ldap1: control:Cleartext-Password += '00-1B-21-97-87-E2' (1) ldap1: reply:Reply-Message := 'Hello PFPROD101-254' rlm_ldap (ldap1): Released connection (7) Need 2 more connections to reach min connections (3) rlm_ldap (ldap1): Opening additional connection (8), 1 of 31 pending slots used rlm_ldap (ldap1): Connecting to ldap://srv1-215:389 TLSMC: MozNSS compatibility interception begins. tlsmc_convert: INFO: cannot open the NSS DB, expecting PEM configuration is present. tlsmc_intercept_initialization: INFO: successfully intercepted TLS initialization. Continuing with OpenSSL only. TLSMC: MozNSS compatibility interception ends. rlm_ldap (ldap1): Waiting for bind result... rlm_ldap (ldap1): Bind successful (1) [ldap1] = updated (1) } # redundant redundant_ldap = updated (1) if ((ok || updated) && User-Password) { (1) if ((ok || updated) && User-Password) -> TRUE (1) if ((ok || updated) && User-Password) { (1) update { (1) control:Auth-Type := Accept (1) } # update = noop (1) } # if ((ok || updated) && User-Password) = noop (1) [expiration] = noop (1) [logintime] = noop (1) pap: WARNING: Auth-Type already set. Not setting to PAP (1) [pap] = noop (1) } # authorize = updated (1) Found Auth-Type = Accept (1) Auth-Type = Accept, accepting the user (1) # Executing section post-auth from file /etc/raddb/sites-enabled/default (1) post-auth { (1) update { (1) No attributes updated (1) } # update = noop (1) [exec] = noop (1) policy remove_reply_message_if_eap { (1) if (&reply:EAP-Message && &reply:Reply-Message) { (1) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (1) else { (1) [noop] = noop (1) } # else = noop (1) } # policy remove_reply_message_if_eap = noop (1) } # post-auth = noop (1) Sent Access-Accept Id 59 from 127.0.0.1:1812 to 127.0.0.1:56961 length 0 (1) Reply-Message := "Hello PFPROD101-254" (1) Finished request Waking up in 4.9 seconds. (1) Cleaning up request packet ID 59 with timestamp +219 Ready to process requests

2 1

testing dynamic VLANs (RADIUS-assigned)
by Vieri 15 Mar '19

15 Mar '19

Hi, I'm trying to test a basic VLAN setup. For now I just need to assign a test user's host to a specific VLAN. For simplicity's sake, in the default authorize section (sites-enabled) I am calling a custom policy "filter_username" function which includes the following test clause: if (&User-Name == "tstusr") { update reply { Tunnel-Type := VLAN Tunnel-Medium-Type := IEEE-802 Tunnel-Private-Group-Id := 12 } accept } I see this in the log: (0) Login OK: [tstusr] (from client D1881 port 15 cli F4-39-09-D9-14-C8)(0) Sent Access-Accept Id 16 from 10.215.144.91:1812 to 10.215.144.146:33288 length 0 (0) Tunnel-Type := VLAN (0) Tunnel-Medium-Type := IEEE-802 (0) Tunnel-Private-Group-Id := "12" (0) Finished request However, the host I'm connecting doesn't seem to be able to communicate with other hosts in VLAN 12. How can I debug this further? Thanks, Vieri

2 3

freeradius packet zero session
by Bassem Mettichi 15 Mar '19

15 Mar '19

Hello, what does this message mean on radius.log [sql] stop packet with zero session length Thanks Bassem

2 3

Possible to calculate the Acct-Unique-Session-Id like FR2 did
by Daniel Finger 15 Mar '19

15 Mar '19

Hi! As stated in the Readme does freeradius 3 calculate the Acct-Unique-Session-ID a little different. I tried to adapt the policy, but I am failing since the md5 calculated by fr2 is 16 chars while fr3 uses 32 chars. Is it possible to get the old 16 char value via unlang? Comparison: Freeradius 3: Fri Mar 15 12:55:40 2019 : Debug: (53) Received Accounting-Request Id 188 from 127.0.0.1:48589 to 127.0.0.1:1823 length 164 Fri Mar 15 12:55:40 2019 : Debug: (53) Acct-Session-Id = "000D532D" Fri Mar 15 12:55:40 2019 : Debug: (53) Framed-IP-Address = 10.1.1.253 Fri Mar 15 12:55:40 2019 : Debug: (53) User-Name = "testuser" Fri Mar 15 12:55:40 2019 : Debug: (53) NAS-Port = 918 Fri Mar 15 12:55:40 2019 : Debug: (53) NAS-IP-Address = 1.2.3.4 Fri Mar 15 12:55:40 2019 : Debug: (53) NAS-Identifier = "cisco_vpn" Fri Mar 15 12:55:40 2019 : Debug: (53) # Executing section preacct from file /radius/conf/sites-enabled/conf Fri Mar 15 12:55:40 2019 : Debug: (53) preacct { Fri Mar 15 12:55:40 2019 : Debug: (53) policy acct_unique { Fri Mar 15 12:55:40 2019 : Debug: (53) update request { Fri Mar 15 12:55:40 2019 : Debug: (53) EXPAND %{md5:%{User-Name},%{Acct-Session-ID},%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}},%{Framed-IP-Address},%{NAS-Port}} Fri Mar 15 12:55:40 2019 : Debug: (53) --> 4ef5bf8c3ec7fc4a503baa791573fc15 Fri Mar 15 12:55:40 2019 : Debug: (53) &Acct-Unique-Session-Id := 4ef5bf8c3ec7fc4a503baa791573fc15 Fri Mar 15 12:55:40 2019 : Debug: (53) } # update request = noop Fri Mar 15 12:55:40 2019 : Debug: (53) } # policy acct_unique = noop Freeradius 2: Fri Mar 15 12:58:27 2019 : Info: # Executing section preacct from file /radius3/conf/sites-enabled/conf Fri Mar 15 12:58:27 2019 : Info: +group preacct { Fri Mar 15 12:58:27 2019 : Info: [acct_unique] Hashing 'NAS-Port = 918,Framed-IP-Address = 10.1.1.253,NAS-IP-Address = 1.2.3.4,Acct-Session-Id = "000D532D",User-Name = "testuser"' Fri Mar 15 12:58:27 2019 : Info: [acct_unique] Acct-Unique-Session-ID = "b721c58aae1ea593".

2 1