- Freeradius-Users - lists.freeradius.org

sqlcounter does not work
by Philemon Jaomalaza 11 Jan '19

11 Jan '19

Hello Dear, I use time counters to limit session time without any problem. Now, on the same system, I must also configure the traffic limit. The problem is that if you use a traffic counter (daily or monthly), the user stays connected even if the quota is exceeded. To do it, I proceeded like this: # nano /etc/freeradius/3.0/dictionary and add this: ATTRIBUTE Max-Monthly-Traffic 3003 integer ATTRIBUTE Monthly-Traffic-Limit 3004 integer #nano /mods-config/sql/counter/mysql/monthlytrafficcounter.conf and add this: query = "SELECT SUM (acctinputoctets + acctoutputoctets) FROM radacct WHERE UserName = '% {$ {key}}' AND UNIX_TIMESTAMP (AcctStartTime)> '%% b'" Then, in / mods-available / sqlcounter, I added: sqlcounter monthlytrafficcounter { sql_module_instance = sql #dialect = $ {modules.sql.dialect} dialect = "mysql" counter_name = Monthly-Traffic check_name = Max-Monthly-Traffic reply_name = Monthly-Traffic-Limit key = User-Name reset = monthly $ INCLUDE $ {modconfdir} / sql / counter / $ {dialect} / $ {.: instance} .conf } and enable it: # cd /etc/freeradius/3.0/mods-enabled ln -s ../mods-available/sqlcounter sqlcounter # nano /etc/freeradius/3.0/sites-enabled/default authorize { ... sql # check monthly usage limit monthlytrafficcounter ... } and restart freeradius Could you help me to find out why it does not work? JMLZ --- L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast. https://www.avast.com/antivirus

3 11

Looking for general advice on how to configure a (somewhat complex) freeradius server
by R3DNano 11 Jan '19

11 Jan '19

Greetings to all. I'm kind of new to the radius environment and have spent quite some time for the past weeks going through the documentation and manuals that I could find online. I find the wiki pretty complete and the config files are quite well documented as well. Kudos to the authors. However, I'm a bit stuck trying to design a somewhat complex structure inside my server, which has multiple clients (i.e.: wifi controllers, VPN, etc) and multiple authentication sources (LDAP, different MySQL databases...) - and don't forget eduroam - I'm having a hard time trying to decide where to do the decision making tasks mostly because of fear of configuring it in an improper way. My problem is that I don't know if the best practice to tackle the issue would be to start by setting the clients up and let them all go through the default server and there, do the decision making with unlang to authenticate them against the corresponding auth source depending on ssid, realm etc... or send them to do eduroam proxying from here, even. I could really use your expertise in this. I'm not looking for someone to spoon feed me, just to point me in the right way. Sometimes, seeing some configuration examples for concrete cases could help, but I can't really seem to find any of these (logically, people don't go around sharing their freeradius config). Thanks.

2 3

REST autnorize not recognizing the Auth-Type
by Rens Houben 11 Jan '19

11 Jan '19

So I'm still working on that migration I'd mentioned earlier. One of the major issues I've encountered is that the router (Ericsson SSRs, formerly Redback) uses /two/ access requests to establish a connection: one to identify and authorize the circuit, then another to authenticate the subscriber login. This is a problem because the 'User-Name' attribute for the circuit is constructed as 'routername.port.slot.circuit', so a Dot1Q connection with VLAN-ID 393 connecting to port 2 of the card in slot 1 of router 'rb1-am' would have the username 'rb1-am.2.1.393' -- and our setup uses a redundant pair of routers, so the 'username' would vary depending on which router picked up the connection request first. To deal with this, I decided to insert a REST API in between the circuit requests from freeRADIUS and the database proper. Thanks to the documentation, I figured out how to connect to said API fairly quickly, and to test the setup I configured the API to just statically send the same set of reply attributes (copied literally from the database) every time. However, despite including an "Auth-Type": 'PAP' in the response object, the log complains about a missing Auth-Type and defaults to a reject. It does show the other attributes properly, though, so I'm not sure what I'm doing wrong. The only difference I can see is that the SQL plugin distinguishes between "check" attributes and "reply" attributes and the REST api doesn't seem to do that. Obviously I missed something; I'd appreciate any hints. Debug log follows: FreeRADIUS Version 3.0.12 Copyright (C) 1999-2016 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/3.0/dictionary including configuration file /etc/freeradius/3.0/radiusd.conf including configuration file /etc/freeradius/3.0/proxy.conf including configuration file /etc/freeradius/3.0/clients.conf including files in directory /etc/freeradius/3.0/mods-enabled/ including configuration file /etc/freeradius/3.0/mods-enabled/sql including configuration file /etc/freeradius/3.0/mods-config/sql/main/sqlite/queries.conf including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients including configuration file /etc/freeradius/3.0/mods-enabled/utf8 including configuration file /etc/freeradius/3.0/mods-enabled/rest-urania including configuration file /etc/freeradius/3.0/mods-enabled/digest including configuration file /etc/freeradius/3.0/mods-enabled/echo including configuration file /etc/freeradius/3.0/mods-enabled/linelog including configuration file /etc/freeradius/3.0/mods-enabled/chap including configuration file /etc/freeradius/3.0/mods-enabled/soh including configuration file /etc/freeradius/3.0/mods-enabled/detail including configuration file /etc/freeradius/3.0/mods-enabled/logintime including configuration file /etc/freeradius/3.0/mods-enabled/sql_redbacks_full including configuration file /etc/freeradius/3.0/mods-config/sql/main/postgresql/queries.conf including configuration file /etc/freeradius/3.0/mods-enabled/sql_redbacks including configuration file /etc/freeradius/3.0/mods-enabled/always including configuration file /etc/freeradius/3.0/mods-enabled/expr including configuration file /etc/freeradius/3.0/mods-enabled/preprocess including configuration file /etc/freeradius/3.0/mods-enabled/passwd including configuration file /etc/freeradius/3.0/mods-enabled/pap including configuration file /etc/freeradius/3.0/mods-enabled/detail.log including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth including configuration file /etc/freeradius/3.0/mods-enabled/mschap including configuration file /etc/freeradius/3.0/mods-enabled/exec including configuration file /etc/freeradius/3.0/mods-enabled/files including configuration file /etc/freeradius/3.0/mods-enabled/eap including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap including configuration file /etc/freeradius/3.0/mods-enabled/unpack including configuration file /etc/freeradius/3.0/mods-enabled/unix including configuration file /etc/freeradius/3.0/mods-enabled/replicate including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter including configuration file /etc/freeradius/3.0/mods-enabled/radutmp including configuration file /etc/freeradius/3.0/mods-enabled/realm including configuration file /etc/freeradius/3.0/mods-enabled/expiration including files in directory /etc/freeradius/3.0/policy.d/ including configuration file /etc/freeradius/3.0/policy.d/cui including configuration file /etc/freeradius/3.0/policy.d/accounting including configuration file /etc/freeradius/3.0/policy.d/debug including configuration file /etc/freeradius/3.0/policy.d/operator-name including configuration file /etc/freeradius/3.0/policy.d/dhcp including configuration file /etc/freeradius/3.0/policy.d/filter including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/3.0/policy.d/canonicalization including configuration file /etc/freeradius/3.0/policy.d/abfab-tr including configuration file /etc/freeradius/3.0/policy.d/eap including configuration file /etc/freeradius/3.0/policy.d/control including files in directory /etc/freeradius/3.0/sites-enabled/ including configuration file /etc/freeradius/3.0/sites-enabled/radius-test main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server dc25 { ipaddr = 192.168.81.18 port = 1812 type = "auth" secret = <<< secret >>> response_window = 30.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "none" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 300 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server nettetal { ipaddr = 192.168.84.103 port = 1812 type = "auth" secret = <<< secret >>> response_window = 30.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "none" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 300 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } home_server_pool radiator { type = load-balance home_server = nettetal home_server = dc25 } realm fallback_to_radiator { auth_pool = radiator nostrip } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client redback-test.systemec.office { ipaddr = 192.168.10.10 require_message_authenticator = no secret = <<< secret >>> shortname = "redback-test" virtual_server = "radius-test" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = eap # Creating Auth-Type = pap # Creating Auth-Type = mschap # Creating Auth-Type = MS-CHAP # Creating Post-Auth-Type = Accept radiusd: #### Instantiating modules #### modules { # Loaded module rlm_sql # Loading module "sql" from file /etc/freeradius/3.0/mods-enabled/sql sql { driver = "rlm_sql_null" server = "" port = 0 login = "" password = <<< secret >>> radius_db = "radius" read_groups = yes read_profiles = yes read_clients = no delete_stale_sessions = yes sql_user_name = "%{User-Name}" default_user_profile = "" client_query = "SELECT id, nasname, shortname, type, secret, server FROM nas" authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id" authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id" group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority" simul_count_query = "SELECT COUNT(*) FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-Group}' AND acctstoptime IS NULL" safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" accounting { reference = "%{tolower:type.%{Acct-Status-Type}.query}" type { accounting-on { query = "UPDATE radacct SET acctstoptime = %{%{integer:Event-Timestamp}:-date('now')}, acctsessiontime = (%{%{integer:Event-Timestamp}:-strftime('%%s', 'now')} - strftime('%%s', acctstarttime)), acctterminatecause = '%{Acct-Terminate-Cause}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= %{integer:Event-Timestamp}" } accounting-off { query = "UPDATE radacct SET acctstoptime = %{%{integer:Event-Timestamp}:-date('now')}, acctsessiontime = (%{%{integer:Event-Timestamp}:-strftime('%%s', 'now')} - strftime('%%s', acctstarttime)), acctterminatecause = '%{Acct-Terminate-Cause}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= %{integer:Event-Timestamp}" } start { query = "INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}', %{%{integer:Event-Timestamp}:-date('now')}, %{%{integer:Event-Timestamp}:-date('now')}, NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}')" } interim-update { query = "UPDATE radacct SET acctupdatetime = %{%{integer:Event-Timestamp}:-date('now')}, acctinterval = 0, framedipaddress = '%{Framed-IP-Address}', acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = %{%{Acct-Input-Gigawords}:-0} << 32 | %{%{Acct-Input-Octets}:-0}, acctoutputoctets = %{%{Acct-Output-Gigawords}:-0} << 32 | %{%{Acct-Output-Octets}:-0} WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'" } stop { query = "UPDATE radacct SET acctstoptime = %{%{integer:Event-Timestamp}:-date('now')}, acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = %{%{Acct-Input-Gigawords}:-0} << 32 | %{%{Acct-Input-Octets}:-0}, acctoutputoctets = %{%{Acct-Output-Gigawords}:-0} << 32 | %{%{Acct-Output-Octets}:-0}, acctterminatecause = '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'" } } } post-auth { reference = ".query" query = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')" } } rlm_sql (sql): Driver rlm_sql_null (module rlm_sql_null) loaded and linked Creating attribute SQL-Group # Loaded module rlm_radutmp # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8 # Loaded module rlm_rest # Loading module "rest-urania" from file /etc/freeradius/3.0/mods-enabled/rest-urania rest rest-urania { connect_uri = "http://127.0.0.1:8000/rest" connect_timeout = 4.000000 } # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest # Loaded module rlm_exec # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_detail # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loading module "sql_psql_redbacks_full" from file /etc/freeradius/3.0/mods-enabled/sql_redbacks_full sql sql_psql_redbacks_full { driver = "rlm_sql_postgresql" server = "" port = 5432 login = "freerad" password = <<< secret >>> radius_db = "radius" read_groups = yes read_profiles = yes read_clients = no delete_stale_sessions = yes sql_user_name = "%{User-Name}" default_user_profile = "" client_query = "SELECT id, nasname, shortname, type, secret, server FROM nas" authorize_check_query = "SELECT id, UserName, Attribute, Value, Op FROM radcheck WHERE Username = '%{SQL-User-Name}' ORDER BY id" authorize_reply_query = "SELECT id, UserName, Attribute, Value, Op FROM radreply WHERE Username = '%{SQL-User-Name}' ORDER BY id" authorize_group_check_query = "SELECT id, GroupName, Attribute, Value, op FROM radgroupcheck WHERE GroupName = '%{sql_psql_redbacks_full-SQL-Group}' ORDER BY id" authorize_group_reply_query = "SELECT id, GroupName, Attribute, Value, op FROM radgroupreply WHERE GroupName = '%{sql_psql_redbacks_full-SQL-Group}' ORDER BY id" group_membership_query = "SELECT GroupName FROM radusergroup WHERE UserName='%{SQL-User-Name}' ORDER BY priority" simul_count_query = "SELECT COUNT(*) FROM radacct WHERE UserName='%{SQL-User-Name}' AND AcctStopTime IS NULL" simul_verify_query = "SELECT RadAcctId, AcctSessionId, UserName, NASIPAddress, NASPortId, FramedIPAddress, CallingStationId, FramedProtocol FROM radacct WHERE UserName='%{SQL-User-Name}' AND AcctStopTime IS NULL" safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" query_timeout = 60 accounting { reference = "%{tolower:type.%{%{Acct-Status-Type}:-none}.query}" type { accounting-on { query = "UPDATE radacct SET AcctStopTime = TO_TIMESTAMP(%{integer:Event-Timestamp}), AcctUpdateTime = TO_TIMESTAMP(%{integer:Event-Timestamp}), AcctSessionTime = (%{integer:Event-Timestamp} - EXTRACT(EPOCH FROM(AcctStartTime))), AcctTerminateCause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE AcctStopTime IS NULL AND NASIPAddress= '%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}}' AND AcctStartTime <= '%S'::timestamp" } accounting-off { query = "UPDATE radacct SET AcctStopTime = TO_TIMESTAMP(%{integer:Event-Timestamp}), AcctUpdateTime = TO_TIMESTAMP(%{integer:Event-Timestamp}), AcctSessionTime = (%{integer:Event-Timestamp} - EXTRACT(EPOCH FROM(AcctStartTime))), AcctTerminateCause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE AcctStopTime IS NULL AND NASIPAddress= '%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}}' AND AcctStartTime <= '%S'::timestamp" } start { query = "INSERT INTO radacct (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctUpdateTime, AcctStopTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, ConnectInfo_Stop, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol, FramedIpAddress) VALUES('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', NULLIF('%{Realm}', ''), '%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}}', NULLIF('%{%{NAS-Port-ID}:-%{NAS-Port}}', ''), '%{NAS-Port-Type}', TO_TIMESTAMP(%{integer:Event-Timestamp}), TO_TIMESTAMP(%{integer:Event-Timestamp}), NULL, 0, '%{Acct-Authentic}', '%{Connect-Info}', NULL, 0, 0, '%{Called-Station-Id}', '%{Calling-Station-Id}', NULL, '%{Service-Type}', '%{Framed-Protocol}', NULLIF('%{Framed-IP-Address}', '')::inet)" } interim-update { query = "UPDATE radacct SET FramedIPAddress = NULLIF('%{Framed-IP-Address}', '')::inet, AcctSessionTime = %{%{Acct-Session-Time}:-NULL}, AcctInterval = (%{integer:Event-Timestamp} - EXTRACT(EPOCH FROM (COALESCE(AcctUpdateTime, AcctStartTime)))), AcctUpdateTime = TO_TIMESTAMP(%{integer:Event-Timestamp}), AcctInputOctets = (('%{%{Acct-Input-Gigawords}:-0}'::bigint << 32) + '%{%{Acct-Input-Octets}:-0}'::bigint), AcctOutputOctets = (('%{%{Acct-Output-Gigawords}:-0}'::bigint << 32) + '%{%{Acct-Output-Octets}:-0}'::bigint) WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}' AND AcctStopTime IS NULL" } stop { query = "UPDATE radacct SET AcctStopTime = TO_TIMESTAMP(%{integer:Event-Timestamp}), AcctUpdateTime = TO_TIMESTAMP(%{integer:Event-Timestamp}), AcctSessionTime = COALESCE(%{%{Acct-Session-Time}:-NULL}, (%{integer:Event-Timestamp} - EXTRACT(EPOCH FROM(AcctStartTime)))), AcctInputOctets = (('%{%{Acct-Input-Gigawords}:-0}'::bigint << 32) + '%{%{Acct-Input-Octets}:-0}'::bigint), AcctOutputOctets = (('%{%{Acct-Output-Gigawords}:-0}'::bigint << 32) + '%{%{Acct-Output-Octets}:-0}'::bigint), AcctTerminateCause = '%{Acct-Terminate-Cause}', FramedIPAddress = NULLIF('%{Framed-IP-Address}', '')::inet, ConnectInfo_stop = '%{Connect-Info}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}' AND AcctStopTime IS NULL" } } } post-auth { reference = ".query" query = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES('%{User-Name}', '%{%{User-Password}:-Chap-Password}', '%{reply:Packet-Type}', NOW())" } } rlm_sql (sql_psql_redbacks_full): Driver rlm_sql_postgresql (module rlm_sql_postgresql) loaded and linked Creating attribute sql_psql_redbacks_full-SQL-Group # Loading module "sql_psql_redbacks" from file /etc/freeradius/3.0/mods-enabled/sql_redbacks sql sql_psql_redbacks { driver = "rlm_sql_postgresql" server = "localhost" port = 5432 login = "freerad" password = <<< secret >>> radius_db = "radius" read_groups = yes read_profiles = yes read_clients = no delete_stale_sessions = yes sql_user_name = "" default_user_profile = "" client_query = "SELECT id,nasname,shortname,type,secret FROM nas" safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" accounting { reference = ".query" type { accounting-on { } accounting-off { } start { } interim-update { } stop { } } } post-auth { reference = ".query" } } rlm_sql (sql_psql_redbacks): Driver rlm_sql_postgresql (module rlm_sql_postgresql) loaded and linked # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôoùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔOÙÛÜY" } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/3.0/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap pap { normalise = yes } # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes } # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files files { filename = "/etc/freeradius/3.0/mods-config/files/authorize" acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy" } # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration instantiate { } # Instantiating module "sql" from file /etc/freeradius/3.0/mods-enabled/sql rlm_sql (sql): Attempting to connect to database "radius" rlm_sql (sql): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_sql (sql): Opening additional connection (0), 1 of 32 pending slots used rlm_sql (sql): Opening additional connection (1), 1 of 31 pending slots used rlm_sql (sql): Opening additional connection (2), 1 of 30 pending slots used rlm_sql (sql): Opening additional connection (3), 1 of 29 pending slots used rlm_sql (sql): Opening additional connection (4), 1 of 28 pending slots used # Instantiating module "rest-urania" from file /etc/freeradius/3.0/mods-enabled/rest-urania authorize { uri = "http://127.0.0.1:8000/rest/auth" method = "post" body = "post" auth = "none" require_auth = no timeout = 4.000000 chunk = 0 tls { check_cert = yes check_cert_cn = yes } } authenticate { uri = "http://127.0.0.1:8000/rest/authen" method = "post" body = "post" auth = "none" require_auth = no timeout = 4.000000 chunk = 0 tls { check_cert = yes check_cert_cn = yes } } accounting { uri = "http://127.0.0.1:8000/rest/user/%{User-Name}/sessions/%{Acct-Unique-Session…" method = "post" body = "none" auth = "none" require_auth = no timeout = 4.000000 chunk = 0 tls { check_cert = yes check_cert_cn = yes } } post-auth { uri = "http://127.0.0.1:8000/rest/user/%{User-Name}/mac/%{Called-Station-ID}?actio…" method = "post" body = "none" auth = "none" require_auth = no timeout = 4.000000 chunk = 0 tls { check_cert = yes check_cert_cn = yes } } rlm_rest: libcurl version: libcurl/7.52.1 OpenSSL/1.0.2q zlib/1.2.8 libidn2/0.16 libpsl/0.17.0 (+libidn2/0.16) libssh2/1.7.0 nghttp2/1.18.1 librtmp/2.3 rlm_rest (rest-urania): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_rest (rest-urania): Opening additional connection (0), 1 of 32 pending slots used rlm_rest (rest-urania): Connecting to "http://127.0.0.1:8000/rest" rlm_rest (rest-urania): Opening additional connection (1), 1 of 31 pending slots used rlm_rest (rest-urania): Connecting to "http://127.0.0.1:8000/rest" rlm_rest (rest-urania): Opening additional connection (2), 1 of 30 pending slots used rlm_rest (rest-urania): Connecting to "http://127.0.0.1:8000/rest" rlm_rest (rest-urania): Opening additional connection (3), 1 of 29 pending slots used rlm_rest (rest-urania): Connecting to "http://127.0.0.1:8000/rest" rlm_rest (rest-urania): Opening additional connection (4), 1 of 28 pending slots used rlm_rest (rest-urania): Connecting to "http://127.0.0.1:8000/rest" # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime # Instantiating module "sql_psql_redbacks_full" from file /etc/freeradius/3.0/mods-enabled/sql_redbacks_full postgresql { send_application_name = yes } rlm_sql (sql_psql_redbacks_full): Attempting to connect to database "radius" rlm_sql (sql_psql_redbacks_full): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 5 lifetime = 0 cleanup_interval = 30 idle_timeout = 90 retry_delay = 30 spread = no } rlm_sql (sql_psql_redbacks_full): Opening additional connection (0), 1 of 32 pending slots used rlm_sql_postgresql: Connecting using parameters: dbname='radius' port=5432 user='freerad' password='diverge malign invert hypothesis' application_name='FreeRADIUS 3.0.12 - radiusd (sql_psql_redbacks_full)' Connected to database 'radius' on '/var/run/postgresql' server version 90515, protocol version 3, backend PID 14789 rlm_sql (sql_psql_redbacks_full): Opening additional connection (1), 1 of 31 pending slots used rlm_sql_postgresql: Connecting using parameters: dbname='radius' port=5432 user='freerad' password='diverge malign invert hypothesis' application_name='FreeRADIUS 3.0.12 - radiusd (sql_psql_redbacks_full)' Connected to database 'radius' on '/var/run/postgresql' server version 90515, protocol version 3, backend PID 14790 rlm_sql (sql_psql_redbacks_full): Opening additional connection (2), 1 of 30 pending slots used rlm_sql_postgresql: Connecting using parameters: dbname='radius' port=5432 user='freerad' password='diverge malign invert hypothesis' application_name='FreeRADIUS 3.0.12 - radiusd (sql_psql_redbacks_full)' Connected to database 'radius' on '/var/run/postgresql' server version 90515, protocol version 3, backend PID 14792 rlm_sql (sql_psql_redbacks_full): Opening additional connection (3), 1 of 29 pending slots used rlm_sql_postgresql: Connecting using parameters: dbname='radius' port=5432 user='freerad' password='diverge malign invert hypothesis' application_name='FreeRADIUS 3.0.12 - radiusd (sql_psql_redbacks_full)' Connected to database 'radius' on '/var/run/postgresql' server version 90515, protocol version 3, backend PID 14793 rlm_sql (sql_psql_redbacks_full): Opening additional connection (4), 1 of 28 pending slots used rlm_sql_postgresql: Connecting using parameters: dbname='radius' port=5432 user='freerad' password='diverge malign invert hypothesis' application_name='FreeRADIUS 3.0.12 - radiusd (sql_psql_redbacks_full)' Connected to database 'radius' on '/var/run/postgresql' server version 90515, protocol version 3, backend PID 14794 # Instantiating module "sql_psql_redbacks" from file /etc/freeradius/3.0/mods-enabled/sql_redbacks postgresql { send_application_name = no } rlm_sql (sql_psql_redbacks): Attempting to connect to database "radius" rlm_sql (sql_psql_redbacks): Initialising connection pool pool { start = 5 min = 5 max = 10 spare = 3 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 1 spread = no } rlm_sql (sql_psql_redbacks): Opening additional connection (0), 1 of 10 pending slots used rlm_sql_postgresql: Connecting using parameters: dbname='radius' host='localhost' port=5432 user='freerad' password='diverge malign invert hypothesis' Connected to database 'radius' on 'localhost' server version 90515, protocol version 3, backend PID 14798 rlm_sql (sql_psql_redbacks): Opening additional connection (1), 1 of 9 pending slots used rlm_sql_postgresql: Connecting using parameters: dbname='radius' host='localhost' port=5432 user='freerad' password='diverge malign invert hypothesis' Connected to database 'radius' on 'localhost' server version 90515, protocol version 3, backend PID 14799 rlm_sql (sql_psql_redbacks): Opening additional connection (2), 1 of 8 pending slots used rlm_sql_postgresql: Connecting using parameters: dbname='radius' host='localhost' port=5432 user='freerad' password='diverge malign invert hypothesis' Connected to database 'radius' on 'localhost' server version 90515, protocol version 3, backend PID 14800 rlm_sql (sql_psql_redbacks): Opening additional connection (3), 1 of 7 pending slots used rlm_sql_postgresql: Connecting using parameters: dbname='radius' host='localhost' port=5432 user='freerad' password='diverge malign invert hypothesis' Connected to database 'radius' on 'localhost' server version 90515, protocol version 3, backend PID 14801 rlm_sql (sql_psql_redbacks): Opening additional connection (4), 1 of 6 pending slots used rlm_sql_postgresql: Connecting using parameters: dbname='radius' host='localhost' port=5432 user='freerad' password='diverge malign invert hypothesis' Connected to database 'radius' on 'localhost' server version 90515, protocol version 3, backend PID 14802 # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/3.0/certs" pem_file_type = yes private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key" certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem" ca_file = "/etc/ssl/certs/ca-certificates.crt" private_key_password = <<< secret >>> dh_file = "/etc/freeradius/3.0/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" ecdh_curve = "prime256v1" cache { enable = yes lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/3.0/radiusd.conf } # server server radius-test { # from file /etc/freeradius/3.0/sites-enabled/radius-test # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading post-auth {...} } # server radius-test radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = 192.168.10.31 port = 1812 client redback-test.systemec.private { ipaddr = 192.168.10.10 require_message_authenticator = no secret = <<< secret >>> shortname = "test-redback" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client local-control { ipaddr = 192.168.10.31 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } } listen { type = "acct" ipaddr = 192.168.10.31 port = 1813 } listen { type = "coa" ipaddr = 192.168.10.31 port = 3799 } Listening on auth address 192.168.10.31 port 1812 bound to server radius-test Listening on acct address 192.168.10.31 port 1813 bound to server radius-test Listening on coa address 192.168.10.31 port 3799 bound to server radius-test Listening on proxy address * port 37094 Ready to process requests (0) Received Access-Request Id 88 from 192.168.10.10:1812 to 192.168.10.31:1812 length 127 (0) User-Name = "rb1-am-spare.2.1.393" (0) User-Password = "Redback" (0) Service-Type = Outbound-User (0) NAS-Identifier = "rb1-am-spare" (0) NAS-IP-Address = 172.16.0.64 (0) NAS-Port = 16842817 (0) NAS-Port-Type = Async (0) Platform-Type = SE-100 (0) OS-Version = "12.1.1.12" (0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/radius-test (0) authorize { (0) [chap] = noop (0) eap: No EAP-Message, not doing EAP (0) [eap] = noop (0) if (&Service-Type == Outbound-User) { (0) if (&Service-Type == Outbound-User) -> TRUE (0) if (&Service-Type == Outbound-User) { rlm_rest (rest-urania): Reserved connection (0) (0) rest-urania: Expanding URI components (0) rest-urania: EXPAND http://127.0.0.1:8000 (0) rest-urania: --> http://127.0.0.1:8000 (0) rest-urania: EXPAND /rest/auth (0) rest-urania: --> /rest/auth (0) rest-urania: Sending HTTP POST to "http://127.0.0.1:8000/rest/auth" (0) rest-urania: Encoding attribute "User-Name" (0) rest-urania: Encoding attribute "User-Password" (0) rest-urania: Encoding attribute "Service-Type" (0) rest-urania: Encoding attribute "NAS-Identifier" (0) rest-urania: Encoding attribute "NAS-IP-Address" (0) rest-urania: Encoding attribute "NAS-Port" (0) rest-urania: Encoding attribute "NAS-Port-Type" (0) rest-urania: Encoding attribute "Platform-Type" (0) rest-urania: Encoding attribute "OS-Version" (0) rest-urania: Processing response header (0) rest-urania: Status : 200 (OK) (0) rest-urania: Type : json (application/json) (0) rest-urania: Parsing attribute "Auth-Type" (0) rest-urania: EXPAND PAP (0) rest-urania: --> PAP (0) rest-urania: Auth-Type := pap (0) rest-urania: Parsing attribute "PVC-Encapsulation-Type" (0) rest-urania: EXPAND AAA-ENCAPS-ETH-DOT1Q-PPPOE (0) rest-urania: --> AAA-ENCAPS-ETH-DOT1Q-PPPOE (0) rest-urania: PVC-Encapsulation-Type := AAA-ENCAPS-ETH-DOT1Q-PPPOE (0) rest-urania: Parsing attribute "Bind-Type" (0) rest-urania: EXPAND AAA-AUTH-BIND (0) rest-urania: --> AAA-AUTH-BIND (0) rest-urania: Bind-Type := AAA-AUTH-BIND (0) rest-urania: Parsing attribute "Bind-Auth-Protocol" (0) rest-urania: EXPAND AAA-PPP-PAP (0) rest-urania: --> AAA-PPP-PAP (0) rest-urania: Bind-Auth-Protocol := AAA-PPP-PAP (0) rest-urania: Parsing attribute "Service-Type" (0) rest-urania: EXPAND Dialout-Framed-User (0) rest-urania: --> Dialout-Framed-User (0) rest-urania: Service-Type := Outbound-User (0) rest-urania: Parsing attribute "Cleartext-Password" (0) rest-urania: EXPAND Redback (0) rest-urania: --> Redback (0) rest-urania: Cleartext-Password := "Redback" rlm_rest (rest-urania): Released connection (0) rlm_rest (rest-urania): Need 5 more connections to reach 10 spares rlm_rest (rest-urania): Opening additional connection (5), 1 of 27 pending slots used rlm_rest (rest-urania): Connecting to "http://127.0.0.1:8000/rest" (0) [rest-urania] = updated (0) [ok] = ok (0) } # if (&Service-Type == Outbound-User) = updated (0) ... skipping else: Preceding "if" was taken (0) if (ok) { (0) if (ok) -> FALSE (0) } # authorize = updated (0) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type = Reject (0) Failed to authenticate the user (0) Using Post-Auth-Type Reject (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/radius-test (0) Reject { ... } # empty sub-section is ignored (0) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (0) Sending delayed response (0) Sent Access-Reject Id 88 from 192.168.10.31:1812 to 192.168.10.10:1812 length 62 (0) PVC-Encapsulation-Type = AAA-ENCAPS-ETH-DOT1Q-PPPOE (0) Bind-Type = AAA-AUTH-BIND (0) Bind-Auth-Protocol = AAA-PPP-PAP (0) Service-Type = Outbound-User Waking up in 3.9 seconds.

2 1

FreeRadius 3 OpenLDAP and MAC based Auth
by Jürgen Northe 10 Jan '19

10 Jan '19

Hello ! > You send an Access-Request with User-Name and User-Password > (0) Received Access-Request Id 165 from 192.168.0.7:3437 to >> 192.168.0.215:1812 length 241 >> (0) User-Name = "106530670342" >> (0) User-Password = "106530670342" > You check the user but there's no password > (0) redundant redundant_ldap { >> rlm_ldap (ldap1): Reserved connection (0) >> (0) ldap1: EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}}) >> (0) ldap1: --> (cn=106530670342) >> (0) ldap1: Performing search in "dc=firma,dc=de" with filter >> "(cn=106530670342)", scope "sub" >> (0) ldap1: Waiting for search result... >> (0) ldap1: User object found at DN >> "cn=NBBZ1807-134,cn=4.notebooks,cn=172.17.0.0,cn=SUBNET,cn=DHCP >> Config,dc=firma,dc=de" >> (0) ldap1: Processing user attributes >> (0) ldap1: WARNING: No "known good" password added. Ensure the admin user >> has permission to read the password attribute >> (0) ldap1: WARNING: PAP authentication will *NOT* work with Active >> Directory (if that is what you were trying to configure) >> > So Access-Reject is sent Yes, the Access-request from the switch contains User-Name and User-Password, both attributes contain the mac address without hyphen. If there is a match in LDAP the user is authorized and therefor accepted. The Access-reply should contain the the attributes like VLAN ID. I can see that the user is found in the directory... (0) ldap1: Performing search in "dc=firma,dc=de" with filter "(cn=106530670342)", scope "sub" (0) ldap1: Waiting for search result... (0) ldap1: User object found at DN "cn=NBBZ1807-134,cn=4.notebooks,cn=172.17.0.0,cn=SUBNET,cn=DHCP Config,dc=firma,dc=de" (0) ldap1: Processing user attributes ... (0) } # authorize = ok Am I wrong to say the authorization was successful? In FR2 I had a schema for the freeradius loaded in OpenLDAP. I did not found any related informations for a FR3 schema for OpenLDAP but also tried to use the scheme which I used in FR2 without any other results. Thank you!

2 1

WPA-EAP TLS can not connect from ubuntu but succeeded on windows 10
by Sunho Lee 10 Jan '19

10 Jan '19

Hello. I am trying to test EAP-TLS configuration. I want our robots can connect to any of our charging station's private wifi with centralized authentication. When i try to connect from ubuntu 16.04, the password entry dialog is always popping up upon connection trials, (same as on ubuntu 18.04, cent os 7) but connected well from windows 10 and eapol_test succeeded on ubuntu. What is the problem? Any help would be appreciated. >> Password entry dialog message Authentication required by wireless network Passwords or encryption keys are required to access the wireless network "xxx" Identity: user(a)example.org Private key password: whatever >> Network Configuration: FreeRadius <=> LTE Dongle - Wireless Router <= wifi (WPA2 Enterprise) => ubuntu 16.04 [ EC2 ] [ Charging Station ] [Robot] - Server : FreeRadius 3.0.16 (ubuntu 18.04 LTS) - Router: TP link AC1200 - Supplicant : Ubuntu 16.04 LTS, >> Certificates using "make" command In 'certs' folder >> log (password entry dialog case): ubuntu@ip-10-10-1-238:~$ sudo radiusd -X FreeRADIUS Version 3.0.16 Copyright (C) 1999-2017 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/3.0/dictionary including configuration file /etc/freeradius/3.0/radiusd.conf including configuration file /etc/freeradius/3.0/clients.conf including files in directory /etc/freeradius/3.0/mods-enabled/ including configuration file /etc/freeradius/3.0/mods-enabled/realm including configuration file /etc/freeradius/3.0/mods-enabled/soh including configuration file /etc/freeradius/3.0/mods-enabled/mschap including configuration file /etc/freeradius/3.0/mods-enabled/passwd including configuration file /etc/freeradius/3.0/mods-enabled/replicate including configuration file /etc/freeradius/3.0/mods-enabled/logintime including configuration file /etc/freeradius/3.0/mods-enabled/radutmp including configuration file /etc/freeradius/3.0/mods-enabled/linelog including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap including configuration file /etc/freeradius/3.0/mods-enabled/always including configuration file /etc/freeradius/3.0/mods-enabled/unpack including configuration file /etc/freeradius/3.0/mods-enabled/expiration including configuration file /etc/freeradius/3.0/mods-enabled/unix including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth including configuration file /etc/freeradius/3.0/mods-enabled/echo including configuration file /etc/freeradius/3.0/mods-enabled/expr including configuration file /etc/freeradius/3.0/mods-enabled/detail.log including configuration file /etc/freeradius/3.0/mods-enabled/pap including configuration file /etc/freeradius/3.0/mods-enabled/preprocess including configuration file /etc/freeradius/3.0/mods-enabled/detail including configuration file /etc/freeradius/3.0/mods-enabled/utf8 including configuration file /etc/freeradius/3.0/mods-enabled/chap including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp including configuration file /etc/freeradius/3.0/mods-enabled/digest including configuration file /etc/freeradius/3.0/mods-enabled/exec including configuration file /etc/freeradius/3.0/mods-enabled/eap including configuration file /etc/freeradius/3.0/mods-enabled/files including files in directory /etc/freeradius/3.0/policy.d/ including configuration file /etc/freeradius/3.0/policy.d/accounting including configuration file /etc/freeradius/3.0/policy.d/dhcp including configuration file /etc/freeradius/3.0/policy.d/cui including configuration file /etc/freeradius/3.0/policy.d/canonicalization including configuration file /etc/freeradius/3.0/policy.d/filter including configuration file /etc/freeradius/3.0/policy.d/control including configuration file /etc/freeradius/3.0/policy.d/abfab-tr including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/3.0/policy.d/debug including configuration file /etc/freeradius/3.0/policy.d/operator-name including configuration file /etc/freeradius/3.0/policy.d/eap including files in directory /etc/freeradius/3.0/sites-enabled/ including configuration file /etc/freeradius/3.0/sites-enabled/default main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = no log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client station-1 { ipaddr = 223.171.35.38 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client sunho-notebook { ipaddr = 211.171.128.253 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients # Loaded module rlm_exec # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_detail # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/3.0/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8 # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap eap { default_eap_type = "tls" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files files { filename = "/etc/freeradius/3.0/mods-config/files/authorize" acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy" } instantiate { } # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/3.0/certs" pem_file_type = yes private_key_file = "/etc/freeradius/3.0/certs/server.key" certificate_file = "/etc/freeradius/3.0/certs/server.crt" ca_file = "/etc/freeradius/3.0/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/freeradius/3.0/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" tls_max_version = "" tls_min_version = "1.0" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/3.0/radiusd.conf } # server server default { # from file /etc/freeradius/3.0/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading preacct {...} # Loading accounting {...} # Loading post-auth {...} } # server default radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Ready to process requests (0) Received Access-Request Id 1 from 223.171.35.38:6820 to 10.10.1.238:1812 length 145 (0) User-Name = "user(a)example.org" (0) NAS-IP-Address = 192.168.0.10 (0) Called-Station-Id = "704f573b432b" (0) Calling-Station-Id = "00266645d5f9" (0) NAS-Identifier = "704f573b432b" (0) NAS-Port = 105 (0) Framed-MTU = 1400 (0) NAS-Port-Type = Wireless-802.11 (0) EAP-Message = 0x020000150175736572406578616d706c652e6f7267 (0) Message-Authenticator = 0x7cb7dbef28985f7dae3fc4d27c9f1091 (0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: Looking up realm "example.org" for User-Name = "user(a)example.org" (0) suffix: No such realm "example.org" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 0 length 21 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_tls to process data (0) eap_tls: Initiating new EAP-TLS session (0) eap_tls: Setting verify mode to require certificate from client (0) eap_tls: [eaptls start] = request (0) eap: Sending EAP Request (code 1) ID 1 length 6 (0) eap: EAP session adding &reply:State = 0x203db85d203cb507 (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) Challenge { ... } # empty sub-section is ignored (0) Sent Access-Challenge Id 1 from 10.10.1.238:1812 to 223.171.35.38:6820 length 0 (0) EAP-Message = 0x010100060d20 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0x203db85d203cb507f96591a7e11a91ca (0) Finished request Waking up in 4.9 seconds. (0) Cleaning up request packet ID 1 with timestamp +21 (1) Received Access-Request Id 1 from 223.171.35.38:6820 to 10.10.1.238:1812 length 320 (1) User-Name = "user(a)example.org" (1) NAS-IP-Address = 192.168.0.10 (1) Called-Station-Id = "704f573b432b" (1) Calling-Station-Id = "00266645d5f9" (1) NAS-Identifier = "704f573b432b" (1) NAS-Port = 105 (1) Framed-MTU = 1400 (1) State = 0x203db85d203cb507f96591a7e11a91ca (1) NAS-Port-Type = Wireless-802.11 (1) EAP-Message = 0x020100b20d0016030100a7010000a30303929fa29484d5b8f299850cd11dfce2f03149c1f2d7567abd6763a934ee658b78000038c02cc030009fcca9cca8ccaac02bc02f009ec024c028006bc023c0270067c00ac0140039c009c0130033009d009c003d003c0035002f00ff01000042000b0004030001 (1) Message-Authenticator = 0xf676531d97de6df2673b533cc1b2f384 (1) session-state: No cached attributes (1) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /(a)\./) { (1) if (&User-Name =~ /(a)\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: Looking up realm "example.org" for User-Name = "user(a)example.org" (1) suffix: No such realm "example.org" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 1 length 178 (1) eap: No EAP Start, assuming it's an on-going EAP conversation (1) [eap] = updated (1) [files] = noop (1) [expiration] = noop (1) [logintime] = noop (1) [pap] = noop (1) } # authorize = updated (1) Found Auth-Type = eap (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0x203db85d203cb507 (1) eap: Finished EAP session with state 0x203db85d203cb507 (1) eap: Previous EAP request found for state 0x203db85d203cb507, released from the list (1) eap: Peer sent packet with method EAP TLS (13) (1) eap: Calling submodule eap_tls to process data (1) eap_tls: Continuing EAP-TLS (1) eap_tls: Got final TLS record fragment (172 bytes) (1) eap_tls: WARNING: Total received TLS record fragments (172 bytes), does not equal indicated TLS record length (0 bytes) (1) eap_tls: [eaptls verify] = ok (1) eap_tls: Done initial handshake (1) eap_tls: (other): before SSL initialization (1) eap_tls: TLS_accept: before SSL initialization (1) eap_tls: TLS_accept: before SSL initialization (1) eap_tls: <<< recv TLS 1.2 [length 00a7] (1) eap_tls: TLS_accept: SSLv3/TLS read client hello (1) eap_tls: >>> send TLS 1.2 [length 003d] (1) eap_tls: TLS_accept: SSLv3/TLS write server hello (1) eap_tls: >>> send TLS 1.2 [length 0bd3] (1) eap_tls: TLS_accept: SSLv3/TLS write certificate (1) eap_tls: >>> send TLS 1.2 [length 014d] (1) eap_tls: TLS_accept: SSLv3/TLS write key exchange (1) eap_tls: >>> send TLS 1.2 [length 00c2] (1) eap_tls: TLS_accept: SSLv3/TLS write certificate request (1) eap_tls: >>> send TLS 1.2 [length 0004] (1) eap_tls: TLS_accept: SSLv3/TLS write server done (1) eap_tls: TLS_accept: Need to read more data: SSLv3/TLS write server done (1) eap_tls: In SSL Handshake Phase (1) eap_tls: In SSL Accept mode (1) eap_tls: [eaptls process] = handled (1) eap: Sending EAP Request (code 1) ID 2 length 1014 (1) eap: EAP session adding &reply:State = 0x203db85d213fb507 (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) Challenge { ... } # empty sub-section is ignored (1) Sent Access-Challenge Id 1 from 10.10.1.238:1812 to 223.171.35.38:6820 length 0 (1) EAP-Message = 0x010203f60dc000000e3c160303003d02000039030378027514c9ef6433c7e832cce2ef4f3b624fa6271365982a446a8fb8e51dc8ca00c030000011ff01000100000b000403000102001700001603030bd30b000bcf000bcc0004de308204da308202c2a003020102020101300d06092a864886f70d0101 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0x203db85d213fb507f96591a7e11a91ca (1) Finished request Waking up in 4.9 seconds. (1) Cleaning up request packet ID 1 with timestamp +21 (2) Received Access-Request Id 1 from 223.171.35.38:6820 to 10.10.1.238:1812 length 148 (2) User-Name = "user(a)example.org" (2) NAS-IP-Address = 192.168.0.10 (2) Called-Station-Id = "704f573b432b" (2) Calling-Station-Id = "00266645d5f9" (2) NAS-Identifier = "704f573b432b" (2) NAS-Port = 105 (2) Framed-MTU = 1400 (2) State = 0x203db85d213fb507f96591a7e11a91ca (2) NAS-Port-Type = Wireless-802.11 (2) EAP-Message = 0x020200060d00 (2) Message-Authenticator = 0x194e9ff186c1efce1d73cfac53b03359 (2) session-state: No cached attributes (2) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /(a)\./) { (2) if (&User-Name =~ /(a)\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: Looking up realm "example.org" for User-Name = "user(a)example.org" (2) suffix: No such realm "example.org" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 2 length 6 (2) eap: No EAP Start, assuming it's an on-going EAP conversation (2) [eap] = updated (2) [files] = noop (2) [expiration] = noop (2) [logintime] = noop (2) [pap] = noop (2) } # authorize = updated (2) Found Auth-Type = eap (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0x203db85d213fb507 (2) eap: Finished EAP session with state 0x203db85d213fb507 (2) eap: Previous EAP request found for state 0x203db85d213fb507, released from the list (2) eap: Peer sent packet with method EAP TLS (13) (2) eap: Calling submodule eap_tls to process data (2) eap_tls: Continuing EAP-TLS (2) eap_tls: Peer ACKed our handshake fragment (2) eap_tls: [eaptls verify] = request (2) eap_tls: [eaptls process] = handled (2) eap: Sending EAP Request (code 1) ID 3 length 1014 (2) eap: EAP session adding &reply:State = 0x203db85d223eb507 (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) Challenge { ... } # empty sub-section is ignored (2) Sent Access-Challenge Id 1 from 10.10.1.238:1812 to 223.171.35.38:6820 length 0 (2) EAP-Message = 0x010303f60dc000000e3c62da6c24d6b4cc2a815534cf52a3dc6119f546592d7f997683bdabd3869852f7c8d154a2e8211246c7d623fee8238c239d558ccea05e2339bd46ddb83336a8a5ee846e1bfaa61a03f0f140656fbcbfd9762b345e9c9b67d9c79002c95a6b963fbf22aedf8634d74a2b03a6f9b4 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0x203db85d223eb507f96591a7e11a91ca (2) Finished request Waking up in 4.9 seconds. (2) Cleaning up request packet ID 1 with timestamp +21 (3) Received Access-Request Id 1 from 223.171.35.38:6820 to 10.10.1.238:1812 length 148 (3) User-Name = "user(a)example.org" (3) NAS-IP-Address = 192.168.0.10 (3) Called-Station-Id = "704f573b432b" (3) Calling-Station-Id = "00266645d5f9" (3) NAS-Identifier = "704f573b432b" (3) NAS-Port = 105 (3) Framed-MTU = 1400 (3) State = 0x203db85d223eb507f96591a7e11a91ca (3) NAS-Port-Type = Wireless-802.11 (3) EAP-Message = 0x020300060d00 (3) Message-Authenticator = 0x85f8ff9f5f4076652471f97e44644c7b (3) session-state: No cached attributes (3) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /(a)\./) { (3) if (&User-Name =~ /(a)\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: Looking up realm "example.org" for User-Name = "user(a)example.org" (3) suffix: No such realm "example.org" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 3 length 6 (3) eap: No EAP Start, assuming it's an on-going EAP conversation (3) [eap] = updated (3) [files] = noop (3) [expiration] = noop (3) [logintime] = noop (3) [pap] = noop (3) } # authorize = updated (3) Found Auth-Type = eap (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0x203db85d223eb507 (3) eap: Finished EAP session with state 0x203db85d223eb507 (3) eap: Previous EAP request found for state 0x203db85d223eb507, released from the list (3) eap: Peer sent packet with method EAP TLS (13) (3) eap: Calling submodule eap_tls to process data (3) eap_tls: Continuing EAP-TLS (3) eap_tls: Peer ACKed our handshake fragment (3) eap_tls: [eaptls verify] = request (3) eap_tls: [eaptls process] = handled (3) eap: Sending EAP Request (code 1) ID 4 length 1014 (3) eap: EAP session adding &reply:State = 0x203db85d2339b507 (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) Challenge { ... } # empty sub-section is ignored (3) Sent Access-Challenge Id 1 from 10.10.1.238:1812 to 223.171.35.38:6820 length 0 (3) EAP-Message = 0x010403f60dc000000e3c786fed10a59ec759d78d22d762157a691ce1b46949b6b286ce1a2f630f6a52538243a46529a82525bb5e435a7c25c4f9bd57274db9bfdefb2394bdf9a3a1c0b5bc8efd93093507d3a6230110b342e84713cbd42bed4772bc370ebfb4754993a8bb04356bdddae41190f69eda35 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0x203db85d2339b507f96591a7e11a91ca (3) Finished request Waking up in 4.9 seconds. (3) Cleaning up request packet ID 1 with timestamp +21 (4) Received Access-Request Id 1 from 223.171.35.38:6820 to 10.10.1.238:1812 length 148 (4) User-Name = "user(a)example.org" (4) NAS-IP-Address = 192.168.0.10 (4) Called-Station-Id = "704f573b432b" (4) Calling-Station-Id = "00266645d5f9" (4) NAS-Identifier = "704f573b432b" (4) NAS-Port = 105 (4) Framed-MTU = 1400 (4) State = 0x203db85d2339b507f96591a7e11a91ca (4) NAS-Port-Type = Wireless-802.11 (4) EAP-Message = 0x020400060d00 (4) Message-Authenticator = 0xdda20d09b0b29e18eac85ecda72b7248 (4) session-state: No cached attributes (4) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (4) authorize { (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /(a)\./) { (4) if (&User-Name =~ /(a)\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: Looking up realm "example.org" for User-Name = "user(a)example.org" (4) suffix: No such realm "example.org" (4) [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 4 length 6 (4) eap: No EAP Start, assuming it's an on-going EAP conversation (4) [eap] = updated (4) [files] = noop (4) [expiration] = noop (4) [logintime] = noop (4) [pap] = noop (4) } # authorize = updated (4) Found Auth-Type = eap (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0x203db85d2339b507 (4) eap: Finished EAP session with state 0x203db85d2339b507 (4) eap: Previous EAP request found for state 0x203db85d2339b507, released from the list (4) eap: Peer sent packet with method EAP TLS (13) (4) eap: Calling submodule eap_tls to process data (4) eap_tls: Continuing EAP-TLS (4) eap_tls: Peer ACKed our handshake fragment (4) eap_tls: [eaptls verify] = request (4) eap_tls: [eaptls process] = handled (4) eap: Sending EAP Request (code 1) ID 5 length 642 (4) eap: EAP session adding &reply:State = 0x203db85d2438b507 (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) Challenge { ... } # empty sub-section is ignored (4) Sent Access-Challenge Id 1 from 10.10.1.238:1812 to 223.171.35.38:6820 length 0 (4) EAP-Message = 0x010502820d8000000e3c71c6b50111980c295cf90e036e227db46ae622d3711ce48fc32e0a676f4ff6926904675fbdd650c39cafcc659b4a46fdf8dff8db5f24fce0c3247e045c15485106eb29012d1cb774b362063becd08942125c5b13edde160303014d0c0001490300174104cab9a9380bec6ab4e0 (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0x203db85d2438b507f96591a7e11a91ca (4) Finished request Waking up in 4.9 seconds. (4) Cleaning up request packet ID 1 with timestamp +21 Ready to process requests ----> Best regards, Sun-ho Lee

4 6

Failed binding to acct address * port 1812 bound to server eduroam: Address already in use
by Tal Nur 09 Jan '19

09 Jan '19

Hi All, I tried to setup Eduroam FreeRadius server for one institution in my country. I followed to recommendations how configure it but when I run freeradius -X command I got the error message: "Failed binding to acct address * port 1812 bound to server eduroam: Address already in use" In /etc/freeradius/sites-enabled directory I placed two virtual servers: eduroam and inner-tunnel according the recommendations The inner-tunnel server I configured to listen port 18120, in eduroam 1812. But I'm still having the above error message. Could you help me to fix the problem? I'm attaching two files: output of freeradius -X and inner-tunnel Regards, Nurtal

5 6

freeradius proxying directions..
by Tom Mustaki 09 Jan '19

09 Jan '19

Dear Freeradius community professional. i am a noob in the freeradius business and really need some basic guidance. i was following an article: https://wiki.freeradius.org/guide/2FA-Active-Directory-plus-Proxy and it worked fine. now my goal is to support push notification on mobile devices. (the freeradius should proxy the request without waiting for OTP input from the authenticating user.) instead the freeradius should, after successful LDAP bind, send username + p for password, to the OTP radius. that will trigger a push notification on the mobile device. could anyone point me in the right direction on where and what to change? Thank you very much and keep up the good work. Cheers, Tom

2 4

EAP-PEAP REST Authorize Multiple API Calls
by Emile Swarts 09 Jan '19

09 Jan '19

Hi, I use the rest module to authenticate with a custom API backend with EAP-PEAP. It works well apart from the fact that each request hits the backend API 3 times. I have no rest calls in my default virtual server, just the inner-tunnel. Does anyone have any ideas on how to fix this? This is what my inner-tunnel virtual server looks like: server inner-tunnel { authorize { filter_username rest eap { ok = return } } authenticate { Auth-Type MS-CHAP { mschap } eap } session { } post-auth { redundant { rest ok } Post-Auth-Type REJECT { redundant { rest fail } } } pre-proxy { } post-proxy { eap } }

2 1

FreeRadius 3 OpenLDAP and MAC based Auth
by Jürgen Northe 09 Jan '19

09 Jan '19

First of all, I would like to say that I never copied the configuration files from FR2 to FR just like that. I have always adapted FR3 accordingly. Now I started all from the beginning and only entered the most necessary data. The result seems to be the same. Here the debug output and below a closer look at the ldap section with more verbosity. FreeRADIUS Version 3.0.13 Copyright (C) 1999-2017 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/raddb/dictionary including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/mods-enabled/ including configuration file /etc/raddb/mods-enabled/always including configuration file /etc/raddb/mods-enabled/attr_filter including configuration file /etc/raddb/mods-enabled/cache_eap including configuration file /etc/raddb/mods-enabled/chap including configuration file /etc/raddb/mods-enabled/date including configuration file /etc/raddb/mods-enabled/detail including configuration file /etc/raddb/mods-enabled/detail.log including configuration file /etc/raddb/mods-enabled/dhcp including configuration file /etc/raddb/mods-enabled/digest including configuration file /etc/raddb/mods-enabled/dynamic_clients including configuration file /etc/raddb/mods-enabled/eap including configuration file /etc/raddb/mods-enabled/echo including configuration file /etc/raddb/mods-enabled/exec including configuration file /etc/raddb/mods-enabled/expiration including configuration file /etc/raddb/mods-enabled/expr including configuration file /etc/raddb/mods-enabled/files including configuration file /etc/raddb/mods-enabled/linelog including configuration file /etc/raddb/mods-enabled/logintime including configuration file /etc/raddb/mods-enabled/mschap including configuration file /etc/raddb/mods-enabled/ntlm_auth including configuration file /etc/raddb/mods-enabled/pap including configuration file /etc/raddb/mods-enabled/passwd including configuration file /etc/raddb/mods-enabled/preprocess including configuration file /etc/raddb/mods-enabled/radutmp including configuration file /etc/raddb/mods-enabled/realm including configuration file /etc/raddb/mods-enabled/replicate including configuration file /etc/raddb/mods-enabled/soh including configuration file /etc/raddb/mods-enabled/sradutmp including configuration file /etc/raddb/mods-enabled/unix including configuration file /etc/raddb/mods-enabled/unpack including configuration file /etc/raddb/mods-enabled/utf8 including configuration file /etc/raddb/mods-enabled/redundant_ldap including files in directory /etc/raddb/policy.d/ including configuration file /etc/raddb/policy.d/accounting including configuration file /etc/raddb/policy.d/control including configuration file /etc/raddb/policy.d/cui including configuration file /etc/raddb/policy.d/debug including configuration file /etc/raddb/policy.d/dhcp including configuration file /etc/raddb/policy.d/eap including configuration file /etc/raddb/policy.d/filter including configuration file /etc/raddb/policy.d/operator-name including configuration file /etc/raddb/policy.d/canonicalization including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/inner-tunnel main { security { user = "radiusd" group = "radiusd" allow_core_dumps = no } name = "radiusd" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" } main { name = "radiusd" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" libdir = "/usr/lib64/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 192.168.0.7/32 { ipaddr = 192.168.0.7 require_message_authenticator = no secret = <<< secret >>> shortname = "SWSG1AP1-7" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_always # Loading module "reject" from file /etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_chap # Loading module "chap" from file /etc/raddb/mods-enabled/chap # Loaded module rlm_date # Loading module "date" from file /etc/raddb/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" } # Loaded module rlm_detail # Loading module "detail" from file /etc/raddb/mods-enabled/detail detail { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "auth_log" from file /etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_dhcp # Loading module "dhcp" from file /etc/raddb/mods-enabled/dhcp # Loaded module rlm_digest # Loading module "digest" from file /etc/raddb/mods-enabled/digest # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_eap # Loading module "eap" from file /etc/raddb/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_exec # Loading module "echo" from file /etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loading module "exec" from file /etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/raddb/mods-enabled/expiration # Loaded module rlm_expr # Loading module "expr" from file /etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_files # Loading module "files" from file /etc/raddb/mods-enabled/files files { filename = "/etc/raddb/mods-config/files/authorize" acctusersfile = "/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy" } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/raddb/mods-enabled/linelog linelog { filename = "/var/log/radius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/var/log/radius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loading module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_pap # Loading module "pap" from file /etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups" hints = "/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/raddb/mods-enabled/replicate # Loaded module rlm_soh # Loading module "soh" from file /etc/raddb/mods-enabled/soh soh { dhcp = yes } # Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_unix # Loading module "unix" from file /etc/raddb/mods-enabled/unix unix { radwtmp = "/var/log/radius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_unpack # Loading module "unpack" from file /etc/raddb/mods-enabled/unpack # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/raddb/mods-enabled/utf8 # Loaded module rlm_ldap # Loading module "ldap1" from file /etc/raddb/mods-enabled/redundant_ldap ldap ldap1 { server = "radldap1-215" identity = "cn=Manager,dc=firma,dc=de" password = <<< secret >>> sasl { } user { scope = "sub" access_positive = yes sasl { } } group { filter = "(objectClass=posixGroup)" scope = "sub" name_attribute = "cn" membership_attribute = "memberOf" cacheable_name = no cacheable_dn = no } client { filter = "(objectClass=radiusClient)" scope = "sub" base_dn = "dc=firma,dc=de" } profile { } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 1 res_timeout = 10 srv_timelimit = 3 idle = 60 probes = 3 interval = 3 } tls { ca_file = "/etc/raddb/certs/radldapCA.crt" certificate_file = "/etc/raddb/certs/radldap1-215.crt" private_key_file = "/etc/raddb/certs/radldap1-215.key" random_file = "/dev/urandom" start_tls = yes require_cert = "never" } } Creating attribute ldap1-LDAP-Group # Loading module "ldap2" from file /etc/raddb/mods-enabled/redundant_ldap ldap ldap2 { server = "radldap2-216" identity = "cn=Manager,dc=firma,dc=de" password = <<< secret >>> sasl { } user { scope = "sub" access_positive = yes sasl { } } group { filter = "(objectClass=posixGroup)" scope = "sub" name_attribute = "cn" membership_attribute = "memberOf" cacheable_name = no cacheable_dn = no } client { filter = "(objectClass=radiusClient)" scope = "sub" base_dn = "dc=firma,dc=de" } profile { } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 1 res_timeout = 10 srv_timelimit = 3 idle = 60 probes = 3 interval = 3 } tls { ca_file = "/etc/raddb/certs/radldapCA.crt" certificate_file = "/etc/raddb/certs/radldap2-216.crt" private_key_file = "/etc/raddb/certs/radldap2-216.key" random_file = "/dev/urandom" start_tls = yes require_cert = "never" } } Creating attribute ldap2-LDAP-Group instantiate { # Instantiating module "ldap1" from file /etc/raddb/mods-enabled/redundant_ldap rlm_ldap: libldap vendor: OpenLDAP, version: 20444 accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } rlm_ldap (ldap1): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_ldap (ldap1): Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (ldap1): Connecting to ldap://radldap1-215:389 TLSMC: MozNSS compatibility interception begins. tlsmc_convert: INFO: cannot open the NSS DB, expecting PEM configuration is present. tlsmc_intercept_initialization: INFO: successfully intercepted TLS initialization. Continuing with OpenSSL only. TLSMC: MozNSS compatibility interception ends. rlm_ldap (ldap1): Waiting for bind result... rlm_ldap (ldap1): Bind successful rlm_ldap (ldap1): Opening additional connection (1), 1 of 31 pending slots used rlm_ldap (ldap1): Connecting to ldap://radldap1-215:389 TLSMC: MozNSS compatibility interception begins. tlsmc_convert: INFO: cannot open the NSS DB, expecting PEM configuration is present. tlsmc_intercept_initialization: INFO: successfully intercepted TLS initialization. Continuing with OpenSSL only. TLSMC: MozNSS compatibility interception ends. rlm_ldap (ldap1): Waiting for bind result... rlm_ldap (ldap1): Bind successful rlm_ldap (ldap1): Opening additional connection (2), 1 of 30 pending slots used rlm_ldap (ldap1): Connecting to ldap://radldap1-215:389 TLSMC: MozNSS compatibility interception begins. tlsmc_convert: INFO: cannot open the NSS DB, expecting PEM configuration is present. tlsmc_intercept_initialization: INFO: successfully intercepted TLS initialization. Continuing with OpenSSL only. TLSMC: MozNSS compatibility interception ends. rlm_ldap (ldap1): Waiting for bind result... rlm_ldap (ldap1): Bind successful rlm_ldap (ldap1): Opening additional connection (3), 1 of 29 pending slots used rlm_ldap (ldap1): Connecting to ldap://radldap1-215:389 TLSMC: MozNSS compatibility interception begins. tlsmc_convert: INFO: cannot open the NSS DB, expecting PEM configuration is present. tlsmc_intercept_initialization: INFO: successfully intercepted TLS initialization. Continuing with OpenSSL only. TLSMC: MozNSS compatibility interception ends. rlm_ldap (ldap1): Waiting for bind result... rlm_ldap (ldap1): Bind successful rlm_ldap (ldap1): Opening additional connection (4), 1 of 28 pending slots used rlm_ldap (ldap1): Connecting to ldap://radldap1-215:389 TLSMC: MozNSS compatibility interception begins. tlsmc_convert: INFO: cannot open the NSS DB, expecting PEM configuration is present. tlsmc_intercept_initialization: INFO: successfully intercepted TLS initialization. Continuing with OpenSSL only. TLSMC: MozNSS compatibility interception ends. rlm_ldap (ldap1): Waiting for bind result... rlm_ldap (ldap1): Bind successful # Instantiating module "ldap2" from file /etc/raddb/mods-enabled/redundant_ldap accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } rlm_ldap (ldap2): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_ldap (ldap2): Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (ldap2): Connecting to ldap://radldap2-216:389 TLSMC: MozNSS compatibility interception begins. tlsmc_convert: INFO: cannot open the NSS DB, expecting PEM configuration is present. tlsmc_intercept_initialization: INFO: successfully intercepted TLS initialization. Continuing with OpenSSL only. TLSMC: MozNSS compatibility interception ends. rlm_ldap (ldap2): Waiting for bind result... rlm_ldap (ldap2): Bind successful rlm_ldap (ldap2): Opening additional connection (1), 1 of 31 pending slots used rlm_ldap (ldap2): Connecting to ldap://radldap2-216:389 TLSMC: MozNSS compatibility interception begins. tlsmc_convert: INFO: cannot open the NSS DB, expecting PEM configuration is present. tlsmc_intercept_initialization: INFO: successfully intercepted TLS initialization. Continuing with OpenSSL only. TLSMC: MozNSS compatibility interception ends. rlm_ldap (ldap2): Waiting for bind result... rlm_ldap (ldap2): Bind successful rlm_ldap (ldap2): Opening additional connection (2), 1 of 30 pending slots used rlm_ldap (ldap2): Connecting to ldap://radldap2-216:389 TLSMC: MozNSS compatibility interception begins. tlsmc_convert: INFO: cannot open the NSS DB, expecting PEM configuration is present. tlsmc_intercept_initialization: INFO: successfully intercepted TLS initialization. Continuing with OpenSSL only. TLSMC: MozNSS compatibility interception ends. rlm_ldap (ldap2): Waiting for bind result... rlm_ldap (ldap2): Bind successful rlm_ldap (ldap2): Opening additional connection (3), 1 of 29 pending slots used rlm_ldap (ldap2): Connecting to ldap://radldap2-216:389 TLSMC: MozNSS compatibility interception begins. tlsmc_convert: INFO: cannot open the NSS DB, expecting PEM configuration is present. tlsmc_intercept_initialization: INFO: successfully intercepted TLS initialization. Continuing with OpenSSL only. TLSMC: MozNSS compatibility interception ends. rlm_ldap (ldap2): Waiting for bind result... rlm_ldap (ldap2): Bind successful rlm_ldap (ldap2): Opening additional connection (4), 1 of 28 pending slots used rlm_ldap (ldap2): Connecting to ldap://radldap2-216:389 TLSMC: MozNSS compatibility interception begins. tlsmc_convert: INFO: cannot open the NSS DB, expecting PEM configuration is present. tlsmc_intercept_initialization: INFO: successfully intercepted TLS initialization. Continuing with OpenSSL only. TLSMC: MozNSS compatibility interception ends. rlm_ldap (ldap2): Waiting for bind result... rlm_ldap (ldap2): Bind successful } # Instantiating module "reject" from file /etc/raddb/mods-enabled/always # Instantiating module "fail" from file /etc/raddb/mods-enabled/always # Instantiating module "ok" from file /etc/raddb/mods-enabled/always # Instantiating module "handled" from file /etc/raddb/mods-enabled/always # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always # Instantiating module "noop" from file /etc/raddb/mods-enabled/always # Instantiating module "updated" from file /etc/raddb/mods-enabled/always # Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject [/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response # Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/raddb/certs" pem_file_type = yes private_key_file = "/etc/raddb/certs/radldap1-215.key" certificate_file = "/etc/raddb/certs/radldap1-215.crt" ca_file = "/etc/raddb/certs/radldapCA.crt" dh_file = "/etc/raddb/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "expiration" from file /etc/raddb/mods-enabled/expiration # Instantiating module "files" from file /etc/raddb/mods-enabled/files reading pairlist file /etc/raddb/mods-config/files/authorize reading pairlist file /etc/raddb/mods-config/files/accounting reading pairlist file /etc/raddb/mods-config/files/pre-proxy # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog # Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap # Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "preprocess" from file /etc/raddb/mods-enabled/preprocess reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /etc/raddb/mods-config/preprocess/hints # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/raddb/radiusd.conf } # server server default { # from file /etc/raddb/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/raddb/sites-enabled/inner-tunnel:331 } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on proxy address * port 51461 Listening on proxy address :: port 54714 Ready to process requests (0) Received Access-Request Id 165 from 192.168.0.7:3437 to 192.168.0.215:1812 length 241 (0) User-Name = "106530670342" (0) User-Password = "106530670342" (0) NAS-IP-Address = 192.168.0.7 (0) NAS-Identifier = "SWSG1AP1-7-v161121" (0) NAS-Port = 16879715 (0) NAS-Port-Id = "slot=1;subslot=0;port=25;vlanid=99" (0) NAS-Port-Type = Ethernet (0) Service-Type = Call-Check (0) Framed-Protocol = PPP (0) Calling-Station-Id = "10-65-30-67-03-42" (0) Acct-Session-Id = "1010118123613c010" (0) Huawei-Connect-ID = 1290241 (0) Huawei-Product-ID = "H3C S5120-52C-EI" (0) Huawei-Startup-Stamp = 956750420 (0) Attr-26.43.230 = 0x4769676162697445746865726e6574312f302f3235 (0) # Executing section authorize from file /etc/raddb/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "106530670342", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: No EAP-Message, not doing EAP (0) [eap] = noop (0) files: users: Matched entry DEFAULT at line 195 (0) [files] = ok (0) redundant redundant_ldap { rlm_ldap (ldap1): Reserved connection (0) (0) ldap1: EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}}) (0) ldap1: --> (cn=106530670342) (0) ldap1: Performing search in "dc=firma,dc=de" with filter "(cn=106530670342)", scope "sub" (0) ldap1: Waiting for search result... (0) ldap1: User object found at DN "cn=NBBZ1807-134,cn=4.notebooks,cn=172.17.0.0,cn=SUBNET,cn=DHCP Config,dc=firma,dc=de" (0) ldap1: Processing user attributes (0) ldap1: WARNING: No "known good" password added. Ensure the admin user has permission to read the password attribute (0) ldap1: WARNING: PAP authentication will *NOT* work with Active Directory (if that is what you were trying to configure) rlm_ldap (ldap1): Released connection (0) Need 5 more connections to reach 10 spares rlm_ldap (ldap1): Opening additional connection (5), 1 of 27 pending slots used rlm_ldap (ldap1): Connecting to ldap://radldap1-215:389 TLSMC: MozNSS compatibility interception begins. tlsmc_convert: INFO: cannot open the NSS DB, expecting PEM configuration is present. tlsmc_intercept_initialization: INFO: successfully intercepted TLS initialization. Continuing with OpenSSL only. TLSMC: MozNSS compatibility interception ends. rlm_ldap (ldap1): Waiting for bind result... rlm_ldap (ldap1): Bind successful (0) [ldap1] = ok (0) } # redundant redundant_ldap = ok (0) [expiration] = noop (0) [logintime] = noop (0) pap: WARNING: No "known good" password found for the user. Not setting Auth-Type (0) pap: WARNING: Authentication will fail unless a "known good" password is available (0) [pap] = noop (0) } # authorize = ok (0) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type = Reject (0) Failed to authenticate the user (0) Using Post-Auth-Type Reject (0) # Executing group from file /etc/raddb/sites-enabled/default (0) Post-Auth-Type REJECT { (0) attr_filter.access_reject: EXPAND %{User-Name} (0) attr_filter.access_reject: --> 106530670342 (0) attr_filter.access_reject: Matched entry DEFAULT at line 11 (0) [attr_filter.access_reject] = updated (0) [eap] = noop (0) policy remove_reply_message_if_eap { (0) if (&reply:EAP-Message && &reply:Reply-Message) { (0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (0) else { (0) [noop] = noop (0) } # else = noop (0) } # policy remove_reply_message_if_eap = noop (0) } # Post-Auth-Type REJECT = updated (0) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (0) Sending delayed response (0) Sent Access-Reject Id 165 from 192.168.0.215:1812 to 192.168.0.7:3437 length 20 closer look... Wed Jan 9 12:32:33 2019 : Debug: (0) ldap1: Performing search in "dc=firma,dc=de" with filter "(cn=106530670342)", scope "sub" Wed Jan 9 12:32:33 2019 : Debug: (0) ldap1: Waiting for search result... Wed Jan 9 12:32:33 2019 : Debug: (0) ldap1: User object found at DN "cn=NBBZ1807-134,cn=4.notebooks,cn=172.17.0.0,cn=SUBNET,cn=DHCP Config,dc=firma,dc=de" Wed Jan 9 12:32:33 2019 : Debug: (0) ldap1: Processing user attributes Wed Jan 9 12:32:33 2019 : Debug: (0) ldap1: Attribute "userPassword" not found in LDAP object Wed Jan 9 12:32:33 2019 : Debug: (0) ldap1: Attribute "radiusControlAttribute" not found in LDAP object Wed Jan 9 12:32:33 2019 : Debug: (0) ldap1: Attribute "radiusRequestAttribute" not found in LDAP object Wed Jan 9 12:32:33 2019 : Debug: (0) ldap1: Attribute "radiusReplyAttribute" not found in LDAP object Wed Jan 9 12:32:33 2019 : WARNING: (0) ldap1: No "known good" password added. Ensure the admin user has permission to read the password attribute Wed Jan 9 12:32:33 2019 : WARNING: (0) ldap1: PAP authentication will *NOT* work with Active Directory (if that is what you were trying to configure) Wed Jan 9 12:32:33 2019 : Debug: rlm_ldap (ldap1): Released connection (5) Wed Jan 9 12:32:33 2019 : Info: Need 2 more connections to reach min connections (3) Wed Jan 9 12:32:33 2019 : Info: rlm_ldap (ldap1): Opening additional connection (6), 1 of 31 pending slots used Wed Jan 9 12:32:33 2019 : Debug: rlm_ldap (ldap1): Connecting to ldap://radldap1-215:389 Wed Jan 9 12:32:33 2019 : Debug: rlm_ldap (ldap1): New libldap handle 0x5606165d3d70 TLSMC: MozNSS compatibility interception begins. tlsmc_convert: INFO: cannot open the NSS DB, expecting PEM configuration is present. tlsmc_intercept_initialization: INFO: successfully intercepted TLS initialization. Continuing with OpenSSL only. TLSMC: MozNSS compatibility interception ends. Wed Jan 9 12:32:33 2019 : Debug: rlm_ldap (ldap1): Waiting for bind result... Wed Jan 9 12:32:33 2019 : Debug: rlm_ldap (ldap1): Bind successful Wed Jan 9 12:32:33 2019 : Debug: (0) modsingle[authorize]: returned from ldap1 (rlm_ldap) Wed Jan 9 12:32:33 2019 : Debug: (0) [ldap1] = ok Wed Jan 9 12:32:33 2019 : Debug: (0) } # redundant redundant_ldap = ok Wed Jan 9 12:32:33 2019 : Debug: (0) modsingle[authorize]: calling expiration (rlm_expiration) Wed Jan 9 12:32:33 2019 : Debug: (0) modsingle[authorize]: returned from expiration (rlm_expiration) Wed Jan 9 12:32:33 2019 : Debug: (0) [expiration] = noop Wed Jan 9 12:32:33 2019 : Debug: (0) modsingle[authorize]: calling logintime (rlm_logintime) Wed Jan 9 12:32:33 2019 : Debug: (0) modsingle[authorize]: returned from logintime (rlm_logintime) Wed Jan 9 12:32:33 2019 : Debug: (0) [logintime] = noop Wed Jan 9 12:32:33 2019 : Debug: (0) modsingle[authorize]: calling pap (rlm_pap) Wed Jan 9 12:32:33 2019 : WARNING: (0) pap: No "known good" password found for the user. Not setting Auth-Type Wed Jan 9 12:32:33 2019 : WARNING: (0) pap: Authentication will fail unless a "known good" password is available Wed Jan 9 12:32:33 2019 : Debug: (0) modsingle[authorize]: returned from pap (rlm_pap) Wed Jan 9 12:32:33 2019 : Debug: (0) [pap] = noop Wed Jan 9 12:32:33 2019 : Debug: (0) } # authorize = ok Wed Jan 9 12:32:33 2019 : ERROR: (0) No Auth-Type found: rejecting the user via Post-Auth-Type = Reject Wed Jan 9 12:32:33 2019 : Debug: (0) Failed to authenticate the user Wed Jan 9 12:32:33 2019 : Debug: (0) Using Post-Auth-Type Reject The attributes which where not found are not stored in the directory object (laptop), thats true when I query with ldapsearch. Wed Jan 9 12:32:33 2019 : Debug: (0) # Executing group from file /etc/raddb/sites-enabled/default Wed Jan 9 12:32:33 2019 : Debug: (0) Post-Auth-Type REJECT { Wed Jan 9 12:32:33 2019 : Debug: (0) modsingle[post-auth]: calling attr_filter.access_reject (rlm_attr_filter) Wed Jan 9 12:32:33 2019 : Debug: %{User-Name} Wed Jan 9 12:32:33 2019 : Debug: Parsed xlat tree: Waking up in 3.9 seconds. (0) Cleaning up request packet ID 165 with timestamp +30 Ready to process requests

2 1

Ms-Chap + NT-Password
by Anton Kiryushkin 08 Jan '19

08 Jan '19

Hello. I'm sorry for the odd question. I have a freeradius installation with version 3.0.15. Approximately a year ago I configured the next scheme: - all users contained in MySQL; - all users have an NTLM-hash as a password; - when the user tries to auth to a radius, radius-server was hashed the incoming password to NTLM-hash and check it. Now I can't repeat it, and I don't know why. I see the next error in my log: Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: NT-Password := 0x696e616d6974414c545a694e3039393021 Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: ::: FROM 1 TO 1 MAX 2 Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: ::: Examining NT-Password Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: ::: OVERWRITING NT-Password FROM 0 TO 0 Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: ::: TO in 1 out 1 Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: ::: to[0] = NT-Password Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: ... falling-through to profile processing Thu Dec 20 01:10:08 2018 : Debug: rlm_sql (sql-wifi): Released connection (19) Thu Dec 20 01:10:08 2018 : Info: Need 1 more connections to reach min connections (5) Thu Dec 20 01:10:08 2018 : Info: rlm_sql (sql-wifi): Opening additional connection (30), 1 of 6 pending slots used Thu Dec 20 01:10:08 2018 : Debug: rlm_sql_mysql: Starting connect to MySQL server Thu Dec 20 01:10:08 2018 : Debug: rlm_sql_mysql: Connected to database 'my_table' on 127.0.0.1 via TCP/IP, server version 5.7.19-17-log, protocol version 10 Thu Dec 20 01:10:08 2018 : Debug: (138) modsingle[authorize]: returned from sql-wifi (rlm_sql) Thu Dec 20 01:10:08 2018 : Debug: (138) [sql-wifi] = ok Thu Dec 20 01:10:08 2018 : Debug: (138) modsingle[authorize]: calling pap (rlm_pap) Thu Dec 20 01:10:08 2018 : WARNING: (138) pap: Auth-Type already set. Not setting to PAP Thu Dec 20 01:10:08 2018 : Debug: (138) modsingle[authorize]: returned from pap (rlm_pap) Thu Dec 20 01:10:08 2018 : Debug: (138) [pap] = noop Thu Dec 20 01:10:08 2018 : Debug: (138) } # authorize = updated Thu Dec 20 01:10:08 2018 : Debug: (138) Found Auth-Type = eap Thu Dec 20 01:10:08 2018 : Debug: (138) # Executing group from file /etc/raddb/sites-enabled/default Thu Dec 20 01:10:08 2018 : Debug: (138) authenticate { Thu Dec 20 01:10:08 2018 : Debug: (138) modsingle[authenticate]: calling eap (rlm_eap) Thu Dec 20 01:10:08 2018 : Debug: (138) eap: Expiring EAP session with state 0x0d5314a80d540ec8 Thu Dec 20 01:10:08 2018 : Debug: (138) eap: Finished EAP session with state 0x0d5314a80d540ec8 Thu Dec 20 01:10:08 2018 : Debug: (138) eap: Previous EAP request found for state 0x0d5314a80d540ec8, released from the list Thu Dec 20 01:10:08 2018 : Debug: (138) eap: Peer sent packet with method EAP MSCHAPv2 (26) Thu Dec 20 01:10:08 2018 : Debug: (138) eap: Calling submodule eap_mschapv2 to process data Thu Dec 20 01:10:08 2018 : Debug: (138) eap_mschapv2: # Executing group from file /etc/raddb/sites-enabled/default Thu Dec 20 01:10:08 2018 : Debug: (138) eap_mschapv2: Auth-Type MS-CHAP { Thu Dec 20 01:10:08 2018 : Debug: (138) eap_mschapv2: modsingle[authenticate]: calling mschap (rlm_mschap) Thu Dec 20 01:10:08 2018 : WARNING: (138) mschap: NT-Password found but incorrect length, expected 16 bytes got 17 bytes. Authentication may fail Thu Dec 20 01:10:08 2018 : WARNING: (138) mschap: No Cleartext-Password configured. Cannot create NT-Password Thu Dec 20 01:10:08 2018 : WARNING: (138) mschap: No Cleartext-Password configured. Cannot create LM-Password Thu Dec 20 01:10:08 2018 : Debug: (138) mschap: Creating challenge hash with username: y.lilekov Thu Dec 20 01:10:08 2018 : Debug: (138) mschap: Client is using MS-CHAPv2 Thu Dec 20 01:10:08 2018 : ERROR: (138) mschap: FAILED: No NT/LM-Password. Cannot perform authentication Thu Dec 20 01:10:08 2018 : ERROR: (138) mschap: MS-CHAP2-Response is incorrect For the authorize_check_query and authorize_reply_query I'm using the next queries: authorize_check_query = "\ SELECT wifi_id as id, username, 'NT-Password' as attribute, pass_hash, ':=' as op \ FROM ${authcheck_table} \ WHERE username = '%{SQL-User-Name}' \ ORDER BY id" authorize_reply_query = "\ SELECT wifi_id as id, username, 'NT-Password' as attribute, pass_hash, ':=' as op \ FROM ${authcheck_table} \ WHERE username = '%{SQL-User-Name}' \ ORDER BY id" The error is logical. But I can't remember how it could be work a year ago... I'll happy to read any suggestion. -- Best regards, Anton Kiryushkin

4 17