- Freeradius-Users - lists.freeradius.org

PASSWORD CHANGE AT FREERADIUS USER'S DATABASE
by Deepak Kumar Bhagat 24 Dec '18

24 Dec '18

Hi All, Is there a way to update user's password at the NAS (etc/passwd) if the password is changed at freeRADIUS /etc/freeradius/users file?? In other words, does freeRADIUS server notifies/sends new password to the NAS?? -Deepak Bhagat

2 1

RE: Freeradius-Users Digest, Vol 164, Issue 44
by soklang.sum 21 Dec '18

21 Dec '18

Dear support, This my log: # tail -f /var/log/radius/radius.log Info: Loaded virtual server <default> Warning: Ignoring "ldap" (see raddb/mods-available/README.rst) Info: Loaded virtual server default Info: # Skipping contents of 'if' as it is always 'false' -- /etc/raddb/sites-enabled/inner-tunnel:330 Info: Loaded virtual server inner-tunnel Info: Ready to process requests Info: Need 4 more connections to reach 10 spares Info: rlm_sql (sql): Opening additional connection (6), 1 of 26 pending slots used ERROR: (0) pam: ERROR: pam_authenticate failed: Authentication failure Auth: (0) Login incorrect (pam: pam_authenticate failed: Authentication failure): [linux/linux@123] Best regards, Debug radius -X (3) Received Access-Request Id 1 from 172.26.10.34:63261 to 172.24.0.10:1812 length 45 (3) User-Name = "linux" (3) User-Password = "linux@123" (3) # Executing section authorize from file /etc/raddb/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /(a)\./) { (3) if (&User-Name =~ /(a)\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) auth_log: EXPAND /var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (3) auth_log: --> /var/log/radius/radacct/172.26.10.34/auth-detail-20181221 (3) auth_log: /var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /var/log/radius/radacct/172.26.10.34/auth-detail-20181221 (3) auth_log: EXPAND %t (3) auth_log: --> Fri Dec 21 10:56:45 2018 (3) [auth_log] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "linux", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) eap: No EAP-Message, not doing EAP (3) [eap] = noop (3) files: Failed resolving UID: No error (3) files: users: Matched entry DEFAULT at line 221 (3) [files] = ok (3) sql: EXPAND %{User-Name} (3) sql: --> linux (3) sql: SQL-User-Name set to 'linux' rlm_sql (sql): Closing connection (1): Hit idle_timeout, was idle for 76 seconds rlm_sql_mysql: Socket destructor called, closing socket rlm_sql (sql): Closing connection (6): Hit idle_timeout, was idle for 76 seconds rlm_sql_mysql: Socket destructor called, closing socket rlm_sql (sql): Closing connection (2): Hit idle_timeout, was idle for 76 seconds rlm_sql_mysql: Socket destructor called, closing socket rlm_sql (sql): Closing connection (3): Hit idle_timeout, was idle for 67 seconds rlm_sql_mysql: Socket destructor called, closing socket rlm_sql (sql): Closing connection (7): Hit idle_timeout, was idle for 67 seconds rlm_sql_mysql: Socket destructor called, closing socket rlm_sql (sql): Closing connection (4): Hit idle_timeout, was idle for 67 seconds rlm_sql_mysql: Socket destructor called, closing socket rlm_sql (sql): Reserved connection (0) (3) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id (3) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'linux' ORDER BY id (3) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'linux' ORDER BY id (3) sql: User found in radcheck table (3) sql: Conditional check items matched, merging assignment check items (3) sql: MD5-Password := 0x6662656262336539353530303464363162623635616539376331656239616333 (3) sql: EXPAND SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id (3) sql: --> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'linux' ORDER BY id (3) sql: Executing select query: SELECT id, username, attribute, value, op FROM radreply WHERE username = 'linux' ORDER BY id (3) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority (3) sql: --> SELECT groupname FROM radusergroup WHERE username = 'linux' ORDER BY priority (3) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = 'linux' ORDER BY priority (3) sql: User not found in any groups rlm_sql (sql): Released connection (0) Need 7 more connections to reach 10 spares rlm_sql (sql): Opening additional connection (9), 1 of 29 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radiusdb' on Localhost via UNIX socket, server version 10.3.11-MariaDB, protocol version 10 (3) [sql] = ok (3) [expiration] = noop (3) [logintime] = noop (3) pap: Normalizing MD5-Password from hex encoding, 32 bytes -> 16 bytes (3) pap: WARNING: Auth-Type already set. Not setting to PAP (3) [pap] = noop (3) } # authorize = ok (3) Found Auth-Type = pam (3) # Executing group from file /etc/raddb/sites-enabled/default (3) authenticate { (3) pam: Using pamauth string "radiusd" for pam.conf lookup (3) pam: ERROR: pam_authenticate failed: Authentication failure (3) [pam] = reject (3) } # authenticate = reject (3) Failed to authenticate the user (3) Login incorrect (pam: pam_authenticate failed: Authentication failure): [linux/linux@123] (from client private-net1e port 0) (3) Using Post-Auth-Type Reject (3) # Executing group from file /etc/raddb/sites-enabled/default (3) Post-Auth-Type REJECT { (3) sql: EXPAND .query (3) sql: --> .query (3) sql: Using query template 'query' rlm_sql (sql): Reserved connection (8) (3) sql: EXPAND %{User-Name} (3) sql: --> linux (3) sql: SQL-User-Name set to 'linux' (3) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S') (3) sql: --> INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'linux', 'linux@123', 'Access-Reject', '2018-12-21 10:56:45.628824') (3) sql: Executing query: INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'linux', 'linux@123', 'Access-Reject', '2018-12-21 10:56:45.628824') (3) sql: SQL query returned: success (3) sql: 1 record(s) updated rlm_sql (sql): Released connection (8) (3) [sql] = ok (3) attr_filter.access_reject: EXPAND %{User-Name} (3) attr_filter.access_reject: --> linux (3) attr_filter.access_reject: Matched entry DEFAULT at line 11 (3) [attr_filter.access_reject] = updated (3) [eap] = noop (3) policy remove_reply_message_if_eap { (3) if (&reply:EAP-Message && &reply:Reply-Message) { (3) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (3) else { (3) [noop] = noop (3) } # else = noop (3) } # policy remove_reply_message_if_eap = noop (3) } # Post-Auth-Type REJECT = updated (3) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (3) Sending delayed response (3) Sent Access-Reject Id 1 from 172.24.0.10:1812 to 172.26.10.34:63261 length 20 Waking up in 3.9 seconds. (3) Cleaning up request packet ID 1 with timestamp +91 Ready to process requests Sum Soklang Senior Network System Engineer Cambo Technology ISP Co. Ltd. +855 (0) 99 999 208 From: freeradius-users-request(a)lists.freeradius.org Sent: Friday, December 21, 2018 10:36 AM To: freeradius-users(a)lists.freeradius.org Subject: Freeradius-Users Digest, Vol 164, Issue 44 Send Freeradius-Users mailing list submissions to freeradius-users(a)lists.freeradius.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.freeradius.org/mailman/listinfo/freeradius-users or, via email, send a message with subject or body 'help' to freeradius-users-request(a)lists.freeradius.org You can reach the person managing the list at freeradius-users-owner(a)lists.freeradius.org When replying, please edit your Subject line so it is more specific than "Re: Contents of Freeradius-Users digest..." Today's Topics: 1. Re: Ms-Chap + NT-Password (Alan DeKok) 2. Re: Ms-Chap + NT-Password (Anton Kiryushkin) 3. Re: Ms-Chap + NT-Password (Alan DeKok) 4. RE: Freeradius-Users Digest, Vol 164, Issue 43 (soklang.sum) ---------------------------------------------------------------------- Message: 1 Date: Thu, 20 Dec 2018 16:06:05 -0500 From: Alan DeKok <aland(a)deployingradius.com> To: FreeRadius users mailing list <freeradius-users(a)lists.freeradius.org> Subject: Re: Ms-Chap + NT-Password Message-ID: <1AD55C6B-C125-4B3B-BEB9-45FFF80D38A7(a)deployingradius.com> Content-Type: text/plain; charset=us-ascii On Dec 20, 2018, at 3:52 PM, Anton Kiryushkin <swood(a)fotofor.biz> wrote: > > Hello, Alan. > > I checked it. > > Let me show you full log: > > Thu Dec 20 01:10:08 2018 : Debug: (138) User-Name = " > anonymous(a)espressif.com" Please post the log from "radiusd -X" as suggested *EVERYWHERE* in the documentation. For some unknown reason people recently seem to be ignoring all of the documentation that says to post "radiusd -X". This is mentioned in the "man" page, the Wiki, and in the email you get when you join the list. Out of general principle, I'm going to ignore messages which fail to follow the documentation. Re-post this with the *correct* debug log, and I will read it. Alan DeKok. ------------------------------ Message: 2 Date: Thu, 20 Dec 2018 23:18:00 +0000 From: Anton Kiryushkin <swood(a)fotofor.biz> To: FreeRadius users mailing list <freeradius-users(a)lists.freeradius.org> Subject: Re: Ms-Chap + NT-Password Message-ID: <CAM_jxg2Lf_HKfGd3kU4qdbdQmq+SkUbc=-Tvk=W0+jYdzQs1OQ(a)mail.gmail.com> Content-Type: text/plain; charset="UTF-8" Hello, Alan. You're right. My fault. Please see log below: (9) User-Name = "testlogin" (9) NAS-Port = 215 (9) State = 0x5d9ac8cb5bb0d1b476356bca7bc2305b (9) EAP-Message = 0x022a00681900170303005d0000000000000002301470a7306238a494e48f971e6c3870bb09639041141c00594ceaf49ffe07ac3d0ecdb68988c165ca8f370152e4cc61bf8065410eb9cf70432c800237bc3f4b089aaa37633688a6abe470d7f72aacf17e16110ef7 (9) Message-Authenticator = 0x3a5c65e42a9d0494a1805e850396ff75 (9) Acct-Session-Id = "8O2.1x811d36760006c7c6" (9) NAS-Port-Id = "ge-3/0/40.0" (9) Calling-Station-Id = "2c-4d-54-65-19-3b" (9) Called-Station-Id = "88-e0-f3-b0-d6-00" (9) NAS-IP-Address = 192.168.7.2 (9) NAS-Identifier = "sw-ex6210" (9) NAS-Port-Type = Ethernet (9) session-state: No cached attributes (9) # Executing section authorize from file /etc/raddb/sites-enabled/default (9) authorize { (9) if (!control:Cleartext-Password && &User-Password) { (9) if (!control:Cleartext-Password && &User-Password) -> FALSE (9) if (config:User-Password && config:Cleartext-Password) { (9) if (config:User-Password && config:Cleartext-Password) -> FALSE (9) [preprocess] = ok (9) [chap] = noop (9) [mschap] = noop (9) suffix: Checking for suffix after "@" (9) suffix: No '@' in User-Name = "testlogin", looking up realm NULL (9) suffix: No such realm "NULL" (9) [suffix] = noop (9) eap: Peer sent EAP Response (code 2) ID 42 length 104 (9) eap: Continuing tunnel setup (9) [eap] = ok (9) } # authorize = ok (9) Found Auth-Type = eap (9) # Executing group from file /etc/raddb/sites-enabled/default (9) authenticate { (9) eap: Expiring EAP session with state 0x1b445c8e1b6e4610 (9) eap: Finished EAP session with state 0x5d9ac8cb5bb0d1b4 (9) eap: Previous EAP request found for state 0x5d9ac8cb5bb0d1b4, released from the list (9) eap: Peer sent packet with method EAP PEAP (25) (9) eap: Calling submodule eap_peap to process data (9) eap_peap: Continuing EAP-TLS (9) eap_peap: [eaptls verify] = ok (9) eap_peap: Done initial handshake (9) eap_peap: [eaptls process] = ok (9) eap_peap: Session established. Decoding tunneled attributes (9) eap_peap: PEAP state phase2 (9) eap_peap: EAP method MSCHAPv2 (26) (9) eap_peap: Got tunneled request (9) eap_peap: EAP-Message = 0x022a00491a022a0044314bdbebd0c0d0e6a8932b5fcdc388361a00000000000000004318685452e8005b97b446f5c1c0d23265bc1198557b1aa900646d697472792e616e616e796576 (9) eap_peap: Setting User-Name to testlogin (9) eap_peap: Sending tunneled request to default (9) eap_peap: EAP-Message = 0x022a00491a022a0044314bdbebd0c0d0e6a8932b5fcdc388361a00000000000000004318685452e8005b97b446f5c1c0d23265bc1198557b1aa900646d697472792e616e616e796576 (9) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (9) eap_peap: User-Name = "testlogin" (9) eap_peap: State = 0x1b445c8e1b6e4610f294f492105a1239 (9) Virtual server default received request (9) EAP-Message = 0x022a00491a022a0044314bdbebd0c0d0e6a8932b5fcdc388361a00000000000000004318685452e8005b97b446f5c1c0d23265bc1198557b1aa900646d697472792e616e616e796576 (9) FreeRADIUS-Proxied-To = 127.0.0.1 (9) User-Name = "testlogin" (9) State = 0x1b445c8e1b6e4610f294f492105a1239 (9) WARNING: Outer and inner identities are the same. User privacy is compromised. (9) server default { (9) session-state: No cached attributes (9) # Executing section authorize from file /etc/raddb/sites-enabled/default (9) authorize { (9) if (!control:Cleartext-Password && &User-Password) { (9) if (!control:Cleartext-Password && &User-Password) -> FALSE (9) if (config:User-Password && config:Cleartext-Password) { (9) if (config:User-Password && config:Cleartext-Password) -> FALSE (9) [preprocess] = ok (9) [chap] = noop (9) [mschap] = noop (9) suffix: Checking for suffix after "@" (9) suffix: No '@' in User-Name = "testlogin", looking up realm NULL (9) suffix: No such realm "NULL" (9) [suffix] = noop (9) eap: Peer sent EAP Response (code 2) ID 42 length 73 (9) eap: No EAP Start, assuming it's an on-going EAP conversation (9) [eap] = updated (9) sql-wifi: EXPAND %{User-Name} (9) sql-wifi: --> testlogin (9) sql-wifi: SQL-User-Name set to 'testlogin' rlm_sql (sql-wifi): Reserved connection (2) (9) sql-wifi: EXPAND SELECT wifi_id as id, username, 'NT-Password' as attribute, pass_hash, ':=' as op FROM userstable WHERE username = '%{SQL-User-Name}' ORDER BY id (9) sql-wifi: --> SELECT wifi_id as id, username, 'NT-Password' as attribute, pass_hash, ':=' as op FROM userstable WHERE username = 'testlogin' ORDER BY id (9) sql-wifi: Executing select query: SELECT wifi_id as id, username, 'NT-Password' as attribute, pass_hash, ':=' as op FROM userstable WHERE username = 'testlogin' ORDER BY id (9) sql-wifi: User found in radcheck table (9) sql-wifi: Conditional check items matched, merging assignment check items (9) sql-wifi: NT-Password := 0x6336623331333036323736373866653636626166393538616561356566363138 (9) sql-wifi: EXPAND SELECT wifi_id as id, username, 'NT-Password' as attribute, pass_hash, ':=' as op FROM userstable WHERE username = '%{SQL-User-Name}' ORDER BY id (9) sql-wifi: --> SELECT wifi_id as id, username, 'NT-Password' as attribute, pass_hash, ':=' as op FROM userstable WHERE username = 'testlogin' ORDER BY id (9) sql-wifi: Executing select query: SELECT wifi_id as id, username, 'NT-Password' as attribute, pass_hash, ':=' as op FROM userstable WHERE username = 'testlogin' ORDER BY id (9) sql-wifi: User found in radreply table, merging reply items (9) sql-wifi: NT-Password := 0x6336623331333036323736373866653636626166393538616561356566363138 (9) sql-wifi: EXPAND SELECT 'OfficeWifi' as GroupName FROM userstable WHERE UserName='%{SQL-User-Name}' (9) sql-wifi: --> SELECT 'OfficeWifi' as GroupName FROM userstable WHERE UserName='testlogin' (9) sql-wifi: Executing select query: SELECT 'OfficeWifi' as GroupName FROM userstable WHERE UserName='testlogin' (9) sql-wifi: User found in the group table (9) sql-wifi: EXPAND SELECT wifi_id as id, 'OfficeWifi' as GroupName, 'NT-Password' as attribute, password, ':=' as op FROM userstable WHERE Username = '%{SQL-User-Name}' ORDER BY id (9) sql-wifi: --> SELECT wifi_id as id, 'OfficeWifi' as GroupName, 'NT-Password' as attribute, password, ':=' as op FROM userstable WHERE Username = 'testlogin' ORDER BY id (9) sql-wifi: Executing select query: SELECT wifi_id as id, 'OfficeWifi' as GroupName, 'NT-Password' as attribute, password, ':=' as op FROM userstable WHERE Username = 'testlogin' ORDER BY id (9) sql-wifi: Group "OfficeWifi": Conditional check items matched (9) sql-wifi: Group "OfficeWifi": Merging assignment check items (9) sql-wifi: NT-Password := 0x61675648496e73416b666d41 (9) sql-wifi: EXPAND SELECT wifi_id as id, 'OfficeWifi' as GroupName, 'NT-Password' as attribute, password, ':=' as op FROM userstable WHERE Username = '%{SQL-User-Name}' ORDER BY id (9) sql-wifi: --> SELECT wifi_id as id, 'OfficeWifi' as GroupName, 'NT-Password' as attribute, password, ':=' as op FROM userstable WHERE Username = 'testlogin' ORDER BY id (9) sql-wifi: Executing select query: SELECT wifi_id as id, 'OfficeWifi' as GroupName, 'NT-Password' as attribute, password, ':=' as op FROM userstable WHERE Username = 'testlogin' ORDER BY id (9) sql-wifi: Group "OfficeWifi": Merging reply items (9) sql-wifi: NT-Password := 0x61675648496e73416b666d41 rlm_sql (sql-wifi): Released connection (2) (9) [sql-wifi] = ok (9) pap: WARNING: Auth-Type already set. Not setting to PAP (9) [pap] = noop (9) } # authorize = updated (9) Found Auth-Type = eap (9) # Executing group from file /etc/raddb/sites-enabled/default (9) authenticate { (9) eap: Expiring EAP session with state 0x1b445c8e1b6e4610 (9) eap: Finished EAP session with state 0x1b445c8e1b6e4610 (9) eap: Previous EAP request found for state 0x1b445c8e1b6e4610, released from the list (9) eap: Peer sent packet with method EAP MSCHAPv2 (26) (9) eap: Calling submodule eap_mschapv2 to process data (9) eap_mschapv2: # Executing group from file /etc/raddb/sites-enabled/default (9) eap_mschapv2: Auth-Type MS-CHAP { (9) mschap: WARNING: NT-Password found but incorrect length, expected 16 bytes got 12 bytes. Authentication may fail (9) mschap: WARNING: No Cleartext-Password configured. Cannot create NT-Password (9) mschap: WARNING: No Cleartext-Password configured. Cannot create LM-Password (9) mschap: Creating challenge hash with username: testlogin (9) mschap: Client is using MS-CHAPv2 (9) mschap: ERROR: FAILED: No NT/LM-Password. Cannot perform authentication (9) mschap: ERROR: MS-CHAP2-Response is incorrect (9) [mschap] = reject (9) } # Auth-Type MS-CHAP = reject чт, 20 дек. 2018 г. в 21:06, Alan DeKok <aland(a)deployingradius.com>: > On Dec 20, 2018, at 3:52 PM, Anton Kiryushkin <swood(a)fotofor.biz> wrote: > > > > Hello, Alan. > > > > I checked it. > > > > Let me show you full log: > > > > Thu Dec 20 01:10:08 2018 : Debug: (138) User-Name = " > > anonymous(a)espressif.com" > > Please post the log from "radiusd -X" as suggested *EVERYWHERE* in the > documentation. > > For some unknown reason people recently seem to be ignoring all of the > documentation that says to post "radiusd -X". This is mentioned in the > "man" page, the Wiki, and in the email you get when you join the list. > > Out of general principle, I'm going to ignore messages which fail to > follow the documentation. > > Re-post this with the *correct* debug log, and I will read it. > > Alan DeKok. > > > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html -- Best regards, Anton Kiryushkin ------------------------------ Message: 3 Date: Thu, 20 Dec 2018 19:13:12 -0500 From: Alan DeKok <aland(a)deployingradius.com> To: FreeRadius users mailing list <freeradius-users(a)lists.freeradius.org> Subject: Re: Ms-Chap + NT-Password Message-ID: <CF585B0B-C5DC-4341-9620-1879A9BD52C0(a)deployingradius.com> Content-Type: text/plain; charset=us-ascii On Dec 20, 2018, at 6:18 PM, Anton Kiryushkin <swood(a)fotofor.biz> wrote: > You're right. My fault. Please see log below: Thanks. > ... > (9) sql-wifi: Conditional check items matched, merging assignment check > items > (9) sql-wifi: NT-Password := > 0x6336623331333036323736373866653636626166393538616561356566363138 Again... that's all ASCII data. You've taken the hex form of the string: c6b3130627678fe66baf958aea5ef618 And instead of just putting this into SQL: NT-Password := 0xc6b3130627678fe66baf958aea5ef618 You've converted the ASCII representation to hex again... and then set that as the NT password. Don't do that. > ... > (9) eap_mschapv2: Auth-Type MS-CHAP { > (9) mschap: WARNING: NT-Password found but incorrect length, expected 16 > bytes got 12 bytes. Authentication may fail And the NT password is mangled, as noted above. Why are you converting the hex string to ASCII *twice*? Just take the output of smbencrypt, put a "0x" in front of it, and set it as NT-Password in the database: Again: $ smbencrypt hello LM Hash NT Hash -------------------------------- -------------------------------- FDA95FBECA288D44AAD3B435B51404EE 066DDFD4EF0E9CD7C256FE77191EF43C And then: NT-Password := 0x066DDFD4EF0E9CD7C256FE77191EF43C You *don't* have to hex-encode the hex output of smbencrypt. Alan DeKok. ------------------------------ Message: 4 Date: Fri, 21 Dec 2018 10:35:31 +0700 From: "soklang.sum" <soklang.sum(a)cambotech.com> To: "freeradius-users(a)lists.freeradius.org" <freeradius-users(a)lists.freeradius.org> Subject: RE: Freeradius-Users Digest, Vol 164, Issue 43 Message-ID: <5c1c5f83.1c69fb81.e454f.3e46(a)mx.google.com> Content-Type: text/plain; charset="utf-8" Dear Support, I would like to add google authenticator with freeradius. Please kindly assist to support as possible. When I enable in /etc/freeradius/users # Instruct FreeRADIUS to use PAM to authenticate users DEFAULT Auth-Type := PAM Username and password always reject PAM of user in MySQL. Best regards, Sum Soklang Senior Network System Engineer Cambo Technology ISP Co. Ltd. +855 (0) 99 999 208 From: freeradius-users-request(a)lists.freeradius.org Sent: Friday, December 21, 2018 3:54 AM To: freeradius-users(a)lists.freeradius.org Subject: Freeradius-Users Digest, Vol 164, Issue 43 Send Freeradius-Users mailing list submissions to freeradius-users(a)lists.freeradius.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.freeradius.org/mailman/listinfo/freeradius-users or, via email, send a message with subject or body 'help' to freeradius-users-request(a)lists.freeradius.org You can reach the person managing the list at freeradius-users-owner(a)lists.freeradius.org When replying, please edit your Subject line so it is more specific than "Re: Contents of Freeradius-Users digest..." Today's Topics: 1. Re: why user dosn`t connect ? (Alan DeKok) 2. Re: why user dosn`t connect ? (Alan Buxey) 3. Re: Capacity calculation (Alan Buxey) 4. Re: why user dosn`t connect ? (تعلم البرمجة) 5. Re: why user dosn`t connect ? (Alan Buxey) 6. Re: why user dosn`t connect ? (Alan DeKok) 7. Re: why user dosn`t connect ? (Alan Buxey) 8. Re: Ms-Chap + NT-Password (Anton Kiryushkin) ---------------------------------------------------------------------- Message: 1 Date: Thu, 20 Dec 2018 10:18:33 -0500 From: Alan DeKok <aland(a)deployingradius.com> To: FreeRadius users mailing list <freeradius-users(a)lists.freeradius.org> Subject: Re: why user dosn`t connect ? Message-ID: <C061CF1B-7A61-493D-AE3F-6D1FF10E92AB(a)deployingradius.com> Content-Type: text/plain; charset=utf-8 > On Dec 20, 2018, at 9:51 AM, ⁨تعلم البرمجة⁩ <⁨mido2010bona(a)gmail.xn--com-yx0a> wrote: > > but why not added to radacct !! If you're going to reply to your own messages, then PLEASE edit them so you don't post thousands of lines of the same debug output. As for why there's no accounting packets, this is in the FAQ. The NAS is supposed to send accounting packets. Poking FreeRADIUS won't magically make the NAS send accounting packets. Go configure the NAS. Alan DeKok. ------------------------------ Message: 2 Date: Thu, 20 Dec 2018 17:12:29 +0000 From: Alan Buxey <alan.buxey(a)gmail.com> To: FreeRadius users mailing list <freeradius-users(a)lists.freeradius.org> Subject: Re: why user dosn`t connect ? Message-ID: <CAOVYXj9dPO6m_PxKAxd1HL0_AZVC+n6174-8ZKMxt4=O7z=vpQ(a)mail.gmail.com> Content-Type: text/plain; charset="UTF-8" hi, but why not added to radacct !! > because the packet received by the server was an access-request, not an accounting-start, interim update or stop. so no accounting things were done. alan ------------------------------ Message: 3 Date: Thu, 20 Dec 2018 17:18:23 +0000 From: Alan Buxey <alan.buxey(a)gmail.com> To: FreeRadius users mailing list <freeradius-users(a)lists.freeradius.org> Subject: Re: Capacity calculation Message-ID: <CAOVYXj9Jgz3-JOgi-iM6Jejp=vTYaKgsfu-kWUKx9Ku5PKJaVw(a)mail.gmail.com> Content-Type: text/plain; charset="UTF-8" hi, I want to understand how much TPS freeRADIUS will support for below > configuration along with postgresql DB > > as Nathan has said - this all depends on your configuration, requirements, processes/policies that need to be dealt with, etc you can easily do some local benchmarking on a local VM to work out requirements for scaling - obviously the memory requirement will be related to DB requirements (caching etc) - usually the system will be constrained by steps such as DB inserts etc (if doing live ones) rather than CPU - small institutions could probably run FR on a RaspberryPi ... alan ------------------------------ Message: 4 Date: Thu, 20 Dec 2018 19:21:27 +0200 From: تعلم البرمجة <mido2010bona(a)gmail.com> To: freeradius-users(a)lists.freeradius.org Subject: Re: why user dosn`t connect ? Message-ID: <CACe-uLw4kUSF6xP_tLH34EhvzZsmmYxs2GV9hCL09fbFa7qoOA(a)mail.gmail.com> Content-Type: text/plain; charset="UTF-8" thanks allan , i get this error message "User or Chap Password in non-access request" > > ------------------------------ Message: 5 Date: Thu, 20 Dec 2018 17:22:39 +0000 From: Alan Buxey <alan.buxey(a)gmail.com> To: FreeRadius users mailing list <freeradius-users(a)lists.freeradius.org> Subject: Re: why user dosn`t connect ? Message-ID: <CAOVYXj-hicmjZVHAMVNpYE_yqrkWT_9G-bBbBGf_=W+BV8TVqQ(a)mail.gmail.com> Content-Type: text/plain; charset="UTF-8" hi, your sending access requests to port 1813 of the server? alan ‪On Thu, 20 Dec 2018 at 17:22, ‫تعلم البرمجة‬‎ <mido2010bona(a)gmail.com> wrote:‬ > thanks allan , i get this error message "User or Chap Password in > non-access request" > > > > > > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html ------------------------------ Message: 6 Date: Thu, 20 Dec 2018 12:24:35 -0500 From: Alan DeKok <aland(a)deployingradius.com> To: FreeRadius users mailing list <freeradius-users(a)lists.freeradius.org> Subject: Re: why user dosn`t connect ? Message-ID: <7BBEF01A-206F-46DB-BF3E-2FE7326F31F7(a)deployingradius.com> Content-Type: text/plain; charset=utf-8 > On Dec 20, 2018, at 12:21 PM, ⁨تعلم البرمجة⁩ <⁨mido2010bona(a)gmail.xn--com-yx0a> wrote: > > thanks allan , i get this error message "User or Chap Password in > non-access request" That message doesn't come from FreeRADIUS. Alan DeKok. ------------------------------ Message: 7 Date: Thu, 20 Dec 2018 17:27:06 +0000 From: Alan Buxey <alan.buxey(a)gmail.com> To: FreeRadius users mailing list <freeradius-users(a)lists.freeradius.org> Subject: Re: why user dosn`t connect ? Message-ID: <CAOVYXj8c4XNngZ3-XAbxLk69WsDaQpDVgV65b42KfhEfHJQ=wg(a)mail.gmail.com> Content-Type: text/plain; charset="UTF-8" indeed, looks like its from php-radius https://github.com/LawnGnome/php-radius alan ------------------------------ Message: 8 Date: Thu, 20 Dec 2018 20:52:14 +0000 From: Anton Kiryushkin <swood(a)fotofor.biz> To: FreeRadius users mailing list <freeradius-users(a)lists.freeradius.org> Subject: Re: Ms-Chap + NT-Password Message-ID: <CAM_jxg1hM8OLdKf0yHP6KkoXSRL+aCkfQHqk0ezQX+r1KPXcDw(a)mail.gmail.com> Content-Type: text/plain; charset="UTF-8" Hello, Alan. I checked it. Let me show you full log: Thu Dec 20 01:10:08 2018 : Debug: (138) User-Name = " anonymous(a)espressif.com" Thu Dec 20 01:10:08 2018 : Debug: (138) Chargeable-User-Identity = 0x00 Thu Dec 20 01:10:08 2018 : Debug: (138) Location-Capable = Civic-Location Thu Dec 20 01:10:08 2018 : Debug: (138) Calling-Station-Id = "38-2b-78-03-ee-70" Thu Dec 20 01:10:08 2018 : Debug: (138) Called-Station-Id = "cc-46-d6-09-ed-50:BD" Thu Dec 20 01:10:08 2018 : Debug: (138) NAS-Port = 13 Thu Dec 20 01:10:08 2018 : Debug: (138) Cisco-AVPair = "audit-session-id=c0a807c8000000015ba9aa3b" Thu Dec 20 01:10:08 2018 : Debug: (138) Acct-Session-Id = "5ba9aa3b/38:2b:78:03:ee:70/1" Thu Dec 20 01:10:08 2018 : Debug: (138) NAS-IP-Address = 192.168.1.200 Thu Dec 20 01:10:08 2018 : Debug: (138) NAS-Identifier = "wc-5508" Thu Dec 20 01:10:08 2018 : Debug: (138) Airespace-Wlan-Id = 14 Thu Dec 20 01:10:08 2018 : Debug: (138) Service-Type = Framed-User Thu Dec 20 01:10:08 2018 : Debug: (138) Framed-MTU = 1300 Thu Dec 20 01:10:08 2018 : Debug: (138) NAS-Port-Type = Wireless-802.11 Thu Dec 20 01:10:08 2018 : Debug: (138) Tunnel-Type:0 = VLAN Thu Dec 20 01:10:08 2018 : Debug: (138) Tunnel-Medium-Type:0 = IEEE-802 Thu Dec 20 01:10:08 2018 : Debug: (138) Tunnel-Private-Group-Id:0 = "14" Thu Dec 20 01:10:08 2018 : Debug: (138) EAP-Message = 0x0207007b19001703020070493c43a0045e1a736402d6353c2ebfd02b02b3da47074e8043e42814d384055eb07d8a3fdf5fc763651fee8a9c19e2525e0450f5bee24195a432757be658ec4fec63f0d1a904eaed55de4f98bc097aca893e67f8761a530e374122b3ba2c61eab23cf1af3ecd9ab8edf2907b Thu Dec 20 01:10:08 2018 : Debug: (138) State = 0x9a0fd4fc9e08cd9b875e606333810d4e Thu Dec 20 01:10:08 2018 : Debug: (138) Message-Authenticator = 0x3b8a82762eef0a453f82a36821b263f2 Thu Dec 20 01:10:08 2018 : Debug: (138) session-state: No cached attributes Thu Dec 20 01:10:08 2018 : Debug: (138) # Executing section authorize from file /etc/raddb/sites-enabled/default Thu Dec 20 01:10:08 2018 : Debug: (138) authorize { Thu Dec 20 01:10:08 2018 : Debug: (138) if (!control:Cleartext-Password && &User-Password) { Thu Dec 20 01:10:08 2018 : Debug: (138) if (!control:Cleartext-Password && &User-Password) -> FALSE Thu Dec 20 01:10:08 2018 : Debug: (138) if (config:User-Password && config:Cleartext-Password) { Thu Dec 20 01:10:08 2018 : Debug: (138) if (config:User-Password && config:Cleartext-Password) -> FALSE Thu Dec 20 01:10:08 2018 : Debug: (138) modsingle[authorize]: calling preprocess (rlm_preprocess) Thu Dec 20 01:10:08 2018 : Debug: (138) modsingle[authorize]: returned from preprocess (rlm_preprocess) Thu Dec 20 01:10:08 2018 : Debug: (138) [preprocess] = ok Thu Dec 20 01:10:08 2018 : Debug: (138) modsingle[authorize]: calling chap (rlm_chap) Thu Dec 20 01:10:08 2018 : Debug: (138) modsingle[authorize]: returned from chap (rlm_chap) Thu Dec 20 01:10:08 2018 : Debug: (138) [chap] = noop Thu Dec 20 01:10:08 2018 : Debug: (138) modsingle[authorize]: calling mschap (rlm_mschap) Thu Dec 20 01:10:08 2018 : Debug: (138) modsingle[authorize]: returned from mschap (rlm_mschap) Thu Dec 20 01:10:08 2018 : Debug: (138) [mschap] = noop Thu Dec 20 01:10:08 2018 : Debug: (138) modsingle[authorize]: calling suffix (rlm_realm) Thu Dec 20 01:10:08 2018 : Debug: (138) suffix: Checking for suffix after "@" Thu Dec 20 01:10:08 2018 : Debug: (138) suffix: Looking up realm " espressif.com" for User-Name = "anonymous(a)espressif.com" Thu Dec 20 01:10:08 2018 : Debug: (138) suffix: No such realm "espressif.com " Thu Dec 20 01:10:08 2018 : Debug: (138) modsingle[authorize]: returned from suffix (rlm_realm) Thu Dec 20 01:10:08 2018 : Debug: (138) [suffix] = noop Thu Dec 20 01:10:08 2018 : Debug: (138) modsingle[authorize]: calling eap (rlm_eap) Thu Dec 20 01:10:08 2018 : Debug: (138) eap: Peer sent EAP Response (code 2) ID 7 length 123 Thu Dec 20 01:10:08 2018 : Debug: (138) eap: Continuing tunnel setup Thu Dec 20 01:10:08 2018 : Debug: (138) modsingle[authorize]: returned from eap (rlm_eap) Thu Dec 20 01:10:08 2018 : Debug: (138) [eap] = ok Thu Dec 20 01:10:08 2018 : Debug: (138) } # authorize = ok Thu Dec 20 01:10:08 2018 : Debug: (138) Found Auth-Type = eap Thu Dec 20 01:10:08 2018 : Debug: (138) # Executing group from file /etc/raddb/sites-enabled/default Thu Dec 20 01:10:08 2018 : Debug: (138) authenticate { Thu Dec 20 01:10:08 2018 : Debug: (138) modsingle[authenticate]: calling eap (rlm_eap) Thu Dec 20 01:10:08 2018 : Debug: (138) eap: Expiring EAP session with state 0x0d5314a80d540ec8 Thu Dec 20 01:10:08 2018 : Debug: (138) eap: Finished EAP session with state 0x9a0fd4fc9e08cd9b Thu Dec 20 01:10:08 2018 : Debug: (138) eap: Previous EAP request found for state 0x9a0fd4fc9e08cd9b, released from the list Thu Dec 20 01:10:08 2018 : Debug: (138) eap: Peer sent packet with method EAP PEAP (25) Thu Dec 20 01:10:08 2018 : Debug: (138) eap: Calling submodule eap_peap to process data Thu Dec 20 01:10:08 2018 : Debug: (138) eap_peap: Continuing EAP-TLS Thu Dec 20 01:10:08 2018 : Debug: (138) eap_peap: Peer sent flags --- Thu Dec 20 01:10:08 2018 : Debug: (138) eap_peap: [eaptls verify] = ok Thu Dec 20 01:10:08 2018 : Debug: (138) eap_peap: Done initial handshake Thu Dec 20 01:10:08 2018 : Debug: Ignoring cbtls_msg call with pseudo content type 256, version 0 Thu Dec 20 01:10:08 2018 : Debug: (138) eap_peap: [eaptls process] = ok Thu Dec 20 01:10:08 2018 : Debug: (138) eap_peap: Session established. Decoding tunneled attributes Thu Dec 20 01:10:08 2018 : Debug: (138) eap_peap: PEAP state phase2 Thu Dec 20 01:10:08 2018 : Debug: (138) eap_peap: EAP method MSCHAPv2 (26) Thu Dec 20 01:10:08 2018 : Debug: (138) eap_peap: Got tunneled request Thu Dec 20 01:10:08 2018 : Debug: (138) eap_peap: EAP-Message = 0x020700441a0207003f3199f6449a50fa3b50be389565dde6ae4b0000000000000000e78496d30625840ded712d0b260d96bead07a7fdd950530a00792e6c696c656b6f76 Thu Dec 20 01:10:08 2018 : Debug: (138) eap_peap: Setting User-Name to testlogin Thu Dec 20 01:10:08 2018 : Debug: (138) eap_peap: Sending tunneled request to default Thu Dec 20 01:10:08 2018 : Debug: (138) eap_peap: EAP-Message = 0x020700441a0207003f3199f6449a50fa3b50be389565dde6ae4b0000000000000000e78496d30625840ded712d0b260d96bead07a7fdd950530a00792e6c696c656b6f76 Thu Dec 20 01:10:08 2018 : Debug: (138) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 Thu Dec 20 01:10:08 2018 : Debug: (138) eap_peap: User-Name = “testlogin" Thu Dec 20 01:10:08 2018 : Debug: (138) eap_peap: State = 0x0d5314a80d540ec8eca17483a9cfe203 Thu Dec 20 01:10:08 2018 : Debug: (138) Virtual server default received request Thu Dec 20 01:10:08 2018 : Debug: (138) EAP-Message = 0x020700441a0207003f3199f6449a50fa3b50be389565dde6ae4b0000000000000000e78496d30625840ded712d0b260d96bead07a7fdd950530a00792e6c696c656b6f76 Thu Dec 20 01:10:08 2018 : Debug: (138) FreeRADIUS-Proxied-To = 127.0.0.1 Thu Dec 20 01:10:08 2018 : Debug: (138) User-Name = "testlogin " Thu Dec 20 01:10:08 2018 : Debug: (138) State = 0x0d5314a80d540ec8eca17483a9cfe203 Thu Dec 20 01:10:08 2018 : Debug: (138) server default { Thu Dec 20 01:10:08 2018 : Debug: (138) session-state: No cached attributes Thu Dec 20 01:10:08 2018 : Debug: (138) # Executing section authorize from file /etc/raddb/sites-enabled/default Thu Dec 20 01:10:08 2018 : Debug: (138) authorize { Thu Dec 20 01:10:08 2018 : Debug: (138) if (!control:Cleartext-Password && &User-Password) { Thu Dec 20 01:10:08 2018 : Debug: (138) if (!control:Cleartext-Password && &User-Password) -> FALSE Thu Dec 20 01:10:08 2018 : Debug: (138) if (config:User-Password && config:Cleartext-Password) { Thu Dec 20 01:10:08 2018 : Debug: (138) if (config:User-Password && config:Cleartext-Password) -> FALSE Thu Dec 20 01:10:08 2018 : Debug: (138) modsingle[authorize]: calling preprocess (rlm_preprocess) Thu Dec 20 01:10:08 2018 : Debug: (138) modsingle[authorize]: returned from preprocess (rlm_preprocess) Thu Dec 20 01:10:08 2018 : Debug: (138) [preprocess] = ok Thu Dec 20 01:10:08 2018 : Debug: (138) modsingle[authorize]: calling chap (rlm_chap) Thu Dec 20 01:10:08 2018 : Debug: (138) modsingle[authorize]: returned from chap (rlm_chap) Thu Dec 20 01:10:08 2018 : Debug: (138) [chap] = noop Thu Dec 20 01:10:08 2018 : Debug: (138) modsingle[authorize]: calling mschap (rlm_mschap) Thu Dec 20 01:10:08 2018 : Debug: (138) modsingle[authorize]: returned from mschap (rlm_mschap) Thu Dec 20 01:10:08 2018 : Debug: (138) [mschap] = noop Thu Dec 20 01:10:08 2018 : Debug: (138) modsingle[authorize]: calling suffix (rlm_realm) Thu Dec 20 01:10:08 2018 : Debug: (138) suffix: Checking for suffix after "@" Thu Dec 20 01:10:08 2018 : Debug: (138) suffix: No '@' in User-Name = “testlogin", looking up realm NULL Thu Dec 20 01:10:08 2018 : Debug: (138) suffix: No such realm "NULL" Thu Dec 20 01:10:08 2018 : Debug: (138) modsingle[authorize]: returned from suffix (rlm_realm) Thu Dec 20 01:10:08 2018 : Debug: (138) [suffix] = noop Thu Dec 20 01:10:08 2018 : Debug: (138) modsingle[authorize]: calling eap (rlm_eap) Thu Dec 20 01:10:08 2018 : Debug: (138) eap: Peer sent EAP Response (code 2) ID 7 length 68 Thu Dec 20 01:10:08 2018 : Debug: (138) eap: No EAP Start, assuming it's an on-going EAP conversation Thu Dec 20 01:10:08 2018 : Debug: (138) modsingle[authorize]: returned from eap (rlm_eap) Thu Dec 20 01:10:08 2018 : Debug: (138) [eap] = updated Thu Dec 20 01:10:08 2018 : Debug: (138) modsingle[authorize]: calling sql-wifi (rlm_sql) Thu Dec 20 01:10:08 2018 : Debug: %{User-Name} Thu Dec 20 01:10:08 2018 : Debug: Parsed xlat tree: Thu Dec 20 01:10:08 2018 : Debug: attribute --> User-Name Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: EXPAND %{User-Name} Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: --> testlogin Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: SQL-User-Name set to ’testlogin' Thu Dec 20 01:10:08 2018 : Info: rlm_sql (sql-wifi): Closing connection (28): Hit idle_timeout, was idle for 80 seconds Thu Dec 20 01:10:08 2018 : Debug: rlm_sql (sql-wifi): You probably need to lower "min" Thu Dec 20 01:10:08 2018 : Debug: rlm_sql_mysql: Socket destructor called, closing socket Thu Dec 20 01:10:08 2018 : Debug: rlm_sql (sql-wifi): Reserved connection (19) Thu Dec 20 01:10:08 2018 : Debug: SELECT wifi_id as id, UserName, 'NT-Password' as attribute, pass_hash, ':=' as op FROM userstable WHERE username = '%{SQL-User-Name}' ORDER BY id Thu Dec 20 01:10:08 2018 : Debug: Parsed xlat tree: Thu Dec 20 01:10:08 2018 : Debug: literal --> SELECT wifi_id as id, UserName, 'NT-Password' as attribute, pass_hash, ':=' as op FROM userstable WHERE username = ' Thu Dec 20 01:10:08 2018 : Debug: attribute --> SQL-User-Name Thu Dec 20 01:10:08 2018 : Debug: literal --> ' ORDER BY id Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: EXPAND SELECT wifi_id as id, UserName, 'NT-Password' as attribute, pass_hash, ':=' as op FROM userstable WHERE username = '%{SQL-User-Name}' ORDER BY id Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: --> SELECT wifi_id as id, UserName, 'NT-Password' as attribute, pass_hash, ':=' as op FROM userstable WHERE username = ’testlogin' ORDER BY id Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: Executing select query: SELECT wifi_id as id, UserName, 'NT-Password' as attribute, pass_hash, ':=' as op FROM userstable WHERE username = ’testlogin' ORDER BY id Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: User found in radcheck table Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: Conditional check items matched, merging assignment check items Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: NT-Password := 0x3161666532333532663366363365333136376163646230306136646366386235 Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: ::: FROM 1 TO 1 MAX 2 Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: ::: Examining NT-Password Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: ::: APPENDING NT-Password FROM 0 TO 1 Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: ::: TO in 1 out 1 Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: ::: to[0] = Auth-Type Thu Dec 20 01:10:08 2018 : Debug: SELECT wifi_id as id, username, 'NT-Password' as attribute, pass_hash, ':=' as op FROM userstable WHERE username = '%{SQL-User-Name}' ORDER BY id Thu Dec 20 01:10:08 2018 : Debug: Parsed xlat tree: Thu Dec 20 01:10:08 2018 : Debug: literal --> SELECT wifi_id as id, username, 'NT-Password' as attribute, pass_hash, ':=' as op FROM userstable WHERE username = ' Thu Dec 20 01:10:08 2018 : Debug: attribute --> SQL-User-Name Thu Dec 20 01:10:08 2018 : Debug: literal --> ' ORDER BY id Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: EXPAND SELECT wifi_id as id, username, 'NT-Password' as attribute, pass_hash, ':=' as op FROM userstable WHERE username = '%{SQL-User-Name}' ORDER BY id Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: --> SELECT wifi_id as id, username, 'NT-Password' as attribute, pass_hash, ':=' as op FROM userstable WHERE username = ’testlogin' ORDER BY id Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: Executing select query: SELECT wifi_id as id, username, 'NT-Password' as attribute, pass_hash, ':=' as op FROM userstable WHERE username = ’testlogin' ORDER BY id Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: User found in radreply table, merging reply items Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: NT-Password := 0x3161666532333532663366363365333136376163646230306136646366386235 Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: ::: FROM 1 TO 0 MAX 1 Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: ::: Examining NT-Password Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: ::: APPENDING NT-Password FROM 0 TO 0 Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: ::: TO in 0 out 0 Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: ... falling-through to group processing Thu Dec 20 01:10:08 2018 : Debug: SELECT 'OfficeWifi' as GroupName FROM userstable WHERE UserName='%{SQL-User-Name}' Thu Dec 20 01:10:08 2018 : Debug: Parsed xlat tree: Thu Dec 20 01:10:08 2018 : Debug: literal --> SELECT 'OfficeWifi' as GroupName FROM userstable WHERE UserName=' Thu Dec 20 01:10:08 2018 : Debug: attribute --> SQL-User-Name Thu Dec 20 01:10:08 2018 : Debug: literal --> ' Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: EXPAND SELECT 'OfficeWifi' as GroupName FROM userstable WHERE UserName='%{SQL-User-Name}' Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: --> SELECT 'OfficeWifi' as GroupName FROM userstable WHERE UserName='testlogin' Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: Executing select query: SELECT 'OfficeWifi' as GroupName FROM userstable WHERE UserName='testlogin' Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: User found in the group table Thu Dec 20 01:10:08 2018 : Debug: SELECT wifi_id as id, 'OfficeWifi' as GroupName, 'NT-Password' as attribute, password, ':=' as op FROM userstable WHERE Username = '%{SQL-User-Name}' ORDER BY id Thu Dec 20 01:10:08 2018 : Debug: Parsed xlat tree: Thu Dec 20 01:10:08 2018 : Debug: literal --> SELECT wifi_id as id, 'OfficeWifi' as GroupName, 'NT-Password' as attribute, password, ':=' as op FROM userstable WHERE Username = ' Thu Dec 20 01:10:08 2018 : Debug: attribute --> SQL-User-Name Thu Dec 20 01:10:08 2018 : Debug: literal --> ' ORDER BY id Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: EXPAND SELECT wifi_id as id, 'OfficeWifi' as GroupName, 'NT-Password' as attribute, password, ':=' as op FROM userstable WHERE Username = '%{SQL-User-Name}' ORDER BY id Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: --> SELECT wifi_id as id, 'OfficeWifi' as GroupName, 'NT-Password' as attribute, password, ':=' as op FROM userstable WHERE Username = ’testlogin' ORDER BY id Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: Executing select query: SELECT wifi_id as id, 'OfficeWifi' as GroupName, 'NT-Password' as attribute, password, ':=' as op FROM userstable WHERE Username = 'testlogin' ORDER BY id Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: Group "OfficeWifi": Conditional check items matched Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: Group "OfficeWifi": Merging assignment check items Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: NT-Password := 0x696e616d6974414c545a694e3039393021 Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: ::: FROM 1 TO 2 MAX 3 Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: ::: Examining NT-Password Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: ::: OVERWRITING NT-Password FROM 0 TO 1 Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: ::: TO in 2 out 2 Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: ::: to[0] = Auth-Type Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: ::: to[1] = NT-Password Thu Dec 20 01:10:08 2018 : Debug: SELECT wifi_id as id, 'OfficeWifi' as GroupName, 'NT-Password' as attribute, password, ':=' as op FROM userstable WHERE Username = '%{SQL-User-Name}' ORDER BY id Thu Dec 20 01:10:08 2018 : Debug: Parsed xlat tree: Thu Dec 20 01:10:08 2018 : Debug: literal --> SELECT wifi_id as id, 'OfficeWifi' as GroupName, 'NT-Password' as attribute, password, ':=' as op FROM userstable WHERE Username = ' Thu Dec 20 01:10:08 2018 : Debug: attribute --> SQL-User-Name Thu Dec 20 01:10:08 2018 : Debug: literal --> ' ORDER BY id Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: EXPAND SELECT wifi_id as id, 'OfficeWifi' as GroupName, 'NT-Password' as attribute, password, ':=' as op FROM userstable WHERE Username = '%{SQL-User-Name}' ORDER BY id Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: --> SELECT wifi_id as id, 'OfficeWifi' as GroupName, 'NT-Password' as attribute, password, ':=' as op FROM userstable WHERE Username = 'testlogin' ORDER BY id Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: Executing select query: SELECT wifi_id as id, 'OfficeWifi' as GroupName, 'NT-Password' as attribute, password, ':=' as op FROM userstable WHERE Username = 'testlogin' ORDER BY id Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: Group "OfficeWifi": Merging reply items Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: NT-Password := 0x696e616d6974414c545a694e3039393021 Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: ::: FROM 1 TO 1 MAX 2 Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: ::: Examining NT-Password Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: ::: OVERWRITING NT-Password FROM 0 TO 0 Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: ::: TO in 1 out 1 Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: ::: to[0] = NT-Password Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: ... falling-through to profile processing Thu Dec 20 01:10:08 2018 : Debug: rlm_sql (sql-wifi): Released connection (19) Thu Dec 20 01:10:08 2018 : Info: Need 1 more connections to reach min connections (5) Thu Dec 20 01:10:08 2018 : Info: rlm_sql (sql-wifi): Opening additional connection (30), 1 of 6 pending slots used Thu Dec 20 01:10:08 2018 : Debug: rlm_sql_mysql: Starting connect to MySQL server Thu Dec 20 01:10:08 2018 : Debug: rlm_sql_mysql: Connected to database 'vpn_wifi' on 127.0.0.1 via TCP/IP, server version 5.7.19-17-log, protocol version 10 Thu Dec 20 01:10:08 2018 : Debug: (138) modsingle[authorize]: returned from sql-wifi (rlm_sql) Thu Dec 20 01:10:08 2018 : Debug: (138) [sql-wifi] = ok Thu Dec 20 01:10:08 2018 : Debug: (138) modsingle[authorize]: calling pap (rlm_pap) Thu Dec 20 01:10:08 2018 : WARNING: (138) pap: Auth-Type already set. Not setting to PAP Thu Dec 20 01:10:08 2018 : Debug: (138) modsingle[authorize]: returned from pap (rlm_pap) Thu Dec 20 01:10:08 2018 : Debug: (138) [pap] = noop Thu Dec 20 01:10:08 2018 : Debug: (138) } # authorize = updated Thu Dec 20 01:10:08 2018 : Debug: (138) Found Auth-Type = eap Thu Dec 20 01:10:08 2018 : Debug: (138) # Executing group from file /etc/raddb/sites-enabled/default Thu Dec 20 01:10:08 2018 : Debug: (138) authenticate { Thu Dec 20 01:10:08 2018 : Debug: (138) modsingle[authenticate]: calling eap (rlm_eap) Thu Dec 20 01:10:08 2018 : Debug: (138) eap: Expiring EAP session with state 0x0d5314a80d540ec8 Thu Dec 20 01:10:08 2018 : Debug: (138) eap: Finished EAP session with state 0x0d5314a80d540ec8 Thu Dec 20 01:10:08 2018 : Debug: (138) eap: Previous EAP request found for state 0x0d5314a80d540ec8, released from the list Thu Dec 20 01:10:08 2018 : Debug: (138) eap: Peer sent packet with method EAP MSCHAPv2 (26) Thu Dec 20 01:10:08 2018 : Debug: (138) eap: Calling submodule eap_mschapv2 to process data Thu Dec 20 01:10:08 2018 : Debug: (138) eap_mschapv2: # Executing group from file /etc/raddb/sites-enabled/default Thu Dec 20 01:10:08 2018 : Debug: (138) eap_mschapv2: Auth-Type MS-CHAP { Thu Dec 20 01:10:08 2018 : Debug: (138) eap_mschapv2: modsingle[authenticate]: calling mschap (rlm_mschap) Thu Dec 20 01:10:08 2018 : WARNING: (138) mschap: NT-Password found but incorrect length, expected 16 bytes got 17 bytes. Authentication may fail Thu Dec 20 01:10:08 2018 : WARNING: (138) mschap: No Cleartext-Password configured. Cannot create NT-Password Thu Dec 20 01:10:08 2018 : WARNING: (138) mschap: No Cleartext-Password configured. Cannot create LM-Password Thu Dec 20 01:10:08 2018 : Debug: (138) mschap: Creating challenge hash with username: testlogin Thu Dec 20 01:10:08 2018 : Debug: (138) mschap: Client is using MS-CHAPv2 Thu Dec 20 01:10:08 2018 : ERROR: (138) mschap: FAILED: No NT/LM-Password. Cannot perform authentication Thu Dec 20 01:10:08 2018 : ERROR: (138) mschap: MS-CHAP2-Response is incorrect Thu Dec 20 01:10:08 2018 : Debug: (138) modsingle[authenticate]: returned from mschap (rlm_mschap) Thu Dec 20 01:10:08 2018 : Debug: (138) [mschap] = reject Thu Dec 20 01:10:08 2018 : Debug: (138) } # Auth-Type MS-CHAP = reject Thu Dec 20 01:10:08 2018 : Debug: (138) eap: Sending EAP Failure (code 4) ID 7 length 4 Thu Dec 20 01:10:08 2018 : Debug: (138) eap: Freeing handler Thu Dec 20 01:10:08 2018 : Debug: (138) modsingle[authenticate]: returned from eap (rlm_eap) Thu Dec 20 01:10:08 2018 : Debug: (138) [eap] = reject Thu Dec 20 01:10:08 2018 : Debug: (138) } # authenticate = reject Thu Dec 20 01:10:08 2018 : Debug: (138) Failed to authenticate the user Thu Dec 20 01:10:08 2018 : Debug: (138) Using Post-Auth-Type Reject Thu Dec 20 01:10:08 2018 : Debug: (138) Post-Auth-Type sub-section not found. Ignoring. Thu Dec 20 01:10:08 2018 : Auth: (138) Login incorrect (mschap: FAILED: No NT/LM-Password. Cannot perform authentication): [testlogin/<via Auth-Type = eap>] (from client WC-5508_ port 0 via TLS tunnel) Thu Dec 20 01:10:08 2018 : Debug: (138) } # server default Thu Dec 20 01:10:08 2018 : Debug: (138) Virtual server sending reply Thu Dec 20 01:10:08 2018 : Debug: (138) NT-Password = 0x696e616d6974414c545a694e3039393021 Thu Dec 20 01:10:08 2018 : Debug: (138) MS-CHAP-Error = "\007E=691 R=1 C=86e3f7442e804d519197bbbf0301334f V=3 M=Authentication rejected" Thu Dec 20 01:10:08 2018 : Debug: (138) EAP-Message = 0x04070004 Thu Dec 20 01:10:08 2018 : Debug: (138) Message-Authenticator = 0x00000000000000000000000000000000 Thu Dec 20 01:10:08 2018 : Debug: (138) eap_peap: Got tunneled reply code 3 Thu Dec 20 01:10:08 2018 : Debug: (138) eap_peap: NT-Password = 0x696e616d6974414c545a694e3039393021 Thu Dec 20 01:10:08 2018 : Debug: (138) eap_peap: MS-CHAP-Error = "\007E=691 R=1 C=86e3f7442e804d519197bbbf0301334f V=3 M=Authentication rejected" Thu Dec 20 01:10:08 2018 : Debug: (138) eap_peap: EAP-Message = 0x04070004 Thu Dec 20 01:10:08 2018 : Debug: (138) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 Thu Dec 20 01:10:08 2018 : Debug: (138) eap_peap: Got tunneled reply RADIUS code 3 Thu Dec 20 01:10:08 2018 : Debug: (138) eap_peap: NT-Password = 0x696e616d6974414c545a694e3039393021 Thu Dec 20 01:10:08 2018 : Debug: (138) eap_peap: MS-CHAP-Error = "\007E=691 R=1 C=86e3f7442e804d519197bbbf0301334f V=3 M=Authentication rejected" Thu Dec 20 01:10:08 2018 : Debug: (138) eap_peap: EAP-Message = 0x04070004 Thu Dec 20 01:10:08 2018 : Debug: (138) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 Thu Dec 20 01:10:08 2018 : Debug: (138) eap_peap: Tunneled authentication was rejected Thu Dec 20 01:10:08 2018 : Debug: (138) eap_peap: FAILURE Thu Dec 20 01:10:08 2018 : Debug: Ignoring cbtls_msg call with pseudo content type 256, version 0 Thu Dec 20 01:10:08 2018 : Debug: (138) eap: Sending EAP Request (code 1) ID 8 length 59 Thu Dec 20 01:10:08 2018 : Debug: (138) eap: EAP session adding &reply:State = 0x9a0fd4fc9f07cd9b Thu Dec 20 01:10:08 2018 : Debug: (138) modsingle[authenticate]: returned from eap (rlm_eap) Thu Dec 20 01:10:08 2018 : Debug: (138) [eap] = handled Thu Dec 20 01:10:08 2018 : Debug: (138) } # authenticate = handled Thu Dec 20 01:10:08 2018 : Debug: (138) Using Post-Auth-Type Challenge Thu Dec 20 01:10:08 2018 : Debug: (138) Post-Auth-Type sub-section not found. Ignoring. Thu Dec 20 01:10:08 2018 : Debug: (138) session-state: Nothing to cache Could you please explain, what for you mean with "It looks like you've taken the input password, and then tried to use that as the NT hash."? Which way I have to use for my case? And what exactly meaning strings below: Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: NT-Password := 0x696e616d6974414c545a694e3039393021 Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: NT-Password := 0x3161666532333532663366363365333136376163646230306136646366386235 That isn't my real hashes. Yes, I used the same hash as you provided via smbencrypt. I can provide with you my full configuration file as well is it could help. чт, 20 дек. 2018 г. в 11:40, Alan DeKok <aland(a)deployingradius.com>: > On Dec 20, 2018, at 2:47 AM, Anton Kiryushkin <swood(a)fotofor.biz> wrote: > > > > Hello, Matthew. > > > > Yes, I have the same fear about the hash. > > I made it in the two ways: > > - hash=$(printf '%s' "${pass}" | iconv -t utf16le | openssl md4 > 2>/dev/null > > | awk '{print $NF}') > > - smbencrypt > > > > Both ways are equal. Which method is right in my case? > > smbencrypt it preferred. I use: > > $ smbencrypt hello > LM Hash NT Hash > -------------------------------- -------------------------------- > FDA95FBECA288D44AAD3B435B51404EE 066DDFD4EF0E9CD7C256FE77191EF43C > > And the use the NT hash. > > There is just no way that an input password ends up being *all* ASCII > characters after hashing. It looks like you've taken the input password, > and then tried to use that as the NT hash. > > Alan DeKok. > > > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html -- Best regards, Anton Kiryushkin ------------------------------ Subject: Digest Footer - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html ------------------------------ End of Freeradius-Users Digest, Vol 164, Issue 43 ************************************************* ------------------------------ Subject: Digest Footer - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html ------------------------------ End of Freeradius-Users Digest, Vol 164, Issue 44 *************************************************

1 0

RE: Freeradius-Users Digest, Vol 164, Issue 43
by soklang.sum 21 Dec '18

21 Dec '18

Dear Support, I would like to add google authenticator with freeradius. Please kindly assist to support as possible. When I enable in /etc/freeradius/users # Instruct FreeRADIUS to use PAM to authenticate users DEFAULT Auth-Type := PAM Username and password always reject PAM of user in MySQL. Best regards, Sum Soklang Senior Network System Engineer Cambo Technology ISP Co. Ltd. +855 (0) 99 999 208 From: freeradius-users-request(a)lists.freeradius.org Sent: Friday, December 21, 2018 3:54 AM To: freeradius-users(a)lists.freeradius.org Subject: Freeradius-Users Digest, Vol 164, Issue 43 Send Freeradius-Users mailing list submissions to freeradius-users(a)lists.freeradius.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.freeradius.org/mailman/listinfo/freeradius-users or, via email, send a message with subject or body 'help' to freeradius-users-request(a)lists.freeradius.org You can reach the person managing the list at freeradius-users-owner(a)lists.freeradius.org When replying, please edit your Subject line so it is more specific than "Re: Contents of Freeradius-Users digest..." Today's Topics: 1. Re: why user dosn`t connect ? (Alan DeKok) 2. Re: why user dosn`t connect ? (Alan Buxey) 3. Re: Capacity calculation (Alan Buxey) 4. Re: why user dosn`t connect ? (تعلم البرمجة) 5. Re: why user dosn`t connect ? (Alan Buxey) 6. Re: why user dosn`t connect ? (Alan DeKok) 7. Re: why user dosn`t connect ? (Alan Buxey) 8. Re: Ms-Chap + NT-Password (Anton Kiryushkin) ---------------------------------------------------------------------- Message: 1 Date: Thu, 20 Dec 2018 10:18:33 -0500 From: Alan DeKok <aland(a)deployingradius.com> To: FreeRadius users mailing list <freeradius-users(a)lists.freeradius.org> Subject: Re: why user dosn`t connect ? Message-ID: <C061CF1B-7A61-493D-AE3F-6D1FF10E92AB(a)deployingradius.com> Content-Type: text/plain; charset=utf-8 > On Dec 20, 2018, at 9:51 AM, ⁨تعلم البرمجة⁩ <⁨mido2010bona(a)gmail.xn--com-yx0a> wrote: > > but why not added to radacct !! If you're going to reply to your own messages, then PLEASE edit them so you don't post thousands of lines of the same debug output. As for why there's no accounting packets, this is in the FAQ. The NAS is supposed to send accounting packets. Poking FreeRADIUS won't magically make the NAS send accounting packets. Go configure the NAS. Alan DeKok. ------------------------------ Message: 2 Date: Thu, 20 Dec 2018 17:12:29 +0000 From: Alan Buxey <alan.buxey(a)gmail.com> To: FreeRadius users mailing list <freeradius-users(a)lists.freeradius.org> Subject: Re: why user dosn`t connect ? Message-ID: <CAOVYXj9dPO6m_PxKAxd1HL0_AZVC+n6174-8ZKMxt4=O7z=vpQ(a)mail.gmail.com> Content-Type: text/plain; charset="UTF-8" hi, but why not added to radacct !! > because the packet received by the server was an access-request, not an accounting-start, interim update or stop. so no accounting things were done. alan ------------------------------ Message: 3 Date: Thu, 20 Dec 2018 17:18:23 +0000 From: Alan Buxey <alan.buxey(a)gmail.com> To: FreeRadius users mailing list <freeradius-users(a)lists.freeradius.org> Subject: Re: Capacity calculation Message-ID: <CAOVYXj9Jgz3-JOgi-iM6Jejp=vTYaKgsfu-kWUKx9Ku5PKJaVw(a)mail.gmail.com> Content-Type: text/plain; charset="UTF-8" hi, I want to understand how much TPS freeRADIUS will support for below > configuration along with postgresql DB > > as Nathan has said - this all depends on your configuration, requirements, processes/policies that need to be dealt with, etc you can easily do some local benchmarking on a local VM to work out requirements for scaling - obviously the memory requirement will be related to DB requirements (caching etc) - usually the system will be constrained by steps such as DB inserts etc (if doing live ones) rather than CPU - small institutions could probably run FR on a RaspberryPi ... alan ------------------------------ Message: 4 Date: Thu, 20 Dec 2018 19:21:27 +0200 From: تعلم البرمجة <mido2010bona(a)gmail.com> To: freeradius-users(a)lists.freeradius.org Subject: Re: why user dosn`t connect ? Message-ID: <CACe-uLw4kUSF6xP_tLH34EhvzZsmmYxs2GV9hCL09fbFa7qoOA(a)mail.gmail.com> Content-Type: text/plain; charset="UTF-8" thanks allan , i get this error message "User or Chap Password in non-access request" > > ------------------------------ Message: 5 Date: Thu, 20 Dec 2018 17:22:39 +0000 From: Alan Buxey <alan.buxey(a)gmail.com> To: FreeRadius users mailing list <freeradius-users(a)lists.freeradius.org> Subject: Re: why user dosn`t connect ? Message-ID: <CAOVYXj-hicmjZVHAMVNpYE_yqrkWT_9G-bBbBGf_=W+BV8TVqQ(a)mail.gmail.com> Content-Type: text/plain; charset="UTF-8" hi, your sending access requests to port 1813 of the server? alan ‪On Thu, 20 Dec 2018 at 17:22, ‫تعلم البرمجة‬‎ <mido2010bona(a)gmail.com> wrote:‬ > thanks allan , i get this error message "User or Chap Password in > non-access request" > > > > > > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html ------------------------------ Message: 6 Date: Thu, 20 Dec 2018 12:24:35 -0500 From: Alan DeKok <aland(a)deployingradius.com> To: FreeRadius users mailing list <freeradius-users(a)lists.freeradius.org> Subject: Re: why user dosn`t connect ? Message-ID: <7BBEF01A-206F-46DB-BF3E-2FE7326F31F7(a)deployingradius.com> Content-Type: text/plain; charset=utf-8 > On Dec 20, 2018, at 12:21 PM, ⁨تعلم البرمجة⁩ <⁨mido2010bona(a)gmail.xn--com-yx0a> wrote: > > thanks allan , i get this error message "User or Chap Password in > non-access request" That message doesn't come from FreeRADIUS. Alan DeKok. ------------------------------ Message: 7 Date: Thu, 20 Dec 2018 17:27:06 +0000 From: Alan Buxey <alan.buxey(a)gmail.com> To: FreeRadius users mailing list <freeradius-users(a)lists.freeradius.org> Subject: Re: why user dosn`t connect ? Message-ID: <CAOVYXj8c4XNngZ3-XAbxLk69WsDaQpDVgV65b42KfhEfHJQ=wg(a)mail.gmail.com> Content-Type: text/plain; charset="UTF-8" indeed, looks like its from php-radius https://github.com/LawnGnome/php-radius alan ------------------------------ Message: 8 Date: Thu, 20 Dec 2018 20:52:14 +0000 From: Anton Kiryushkin <swood(a)fotofor.biz> To: FreeRadius users mailing list <freeradius-users(a)lists.freeradius.org> Subject: Re: Ms-Chap + NT-Password Message-ID: <CAM_jxg1hM8OLdKf0yHP6KkoXSRL+aCkfQHqk0ezQX+r1KPXcDw(a)mail.gmail.com> Content-Type: text/plain; charset="UTF-8" Hello, Alan. I checked it. Let me show you full log: Thu Dec 20 01:10:08 2018 : Debug: (138) User-Name = " anonymous(a)espressif.com" Thu Dec 20 01:10:08 2018 : Debug: (138) Chargeable-User-Identity = 0x00 Thu Dec 20 01:10:08 2018 : Debug: (138) Location-Capable = Civic-Location Thu Dec 20 01:10:08 2018 : Debug: (138) Calling-Station-Id = "38-2b-78-03-ee-70" Thu Dec 20 01:10:08 2018 : Debug: (138) Called-Station-Id = "cc-46-d6-09-ed-50:BD" Thu Dec 20 01:10:08 2018 : Debug: (138) NAS-Port = 13 Thu Dec 20 01:10:08 2018 : Debug: (138) Cisco-AVPair = "audit-session-id=c0a807c8000000015ba9aa3b" Thu Dec 20 01:10:08 2018 : Debug: (138) Acct-Session-Id = "5ba9aa3b/38:2b:78:03:ee:70/1" Thu Dec 20 01:10:08 2018 : Debug: (138) NAS-IP-Address = 192.168.1.200 Thu Dec 20 01:10:08 2018 : Debug: (138) NAS-Identifier = "wc-5508" Thu Dec 20 01:10:08 2018 : Debug: (138) Airespace-Wlan-Id = 14 Thu Dec 20 01:10:08 2018 : Debug: (138) Service-Type = Framed-User Thu Dec 20 01:10:08 2018 : Debug: (138) Framed-MTU = 1300 Thu Dec 20 01:10:08 2018 : Debug: (138) NAS-Port-Type = Wireless-802.11 Thu Dec 20 01:10:08 2018 : Debug: (138) Tunnel-Type:0 = VLAN Thu Dec 20 01:10:08 2018 : Debug: (138) Tunnel-Medium-Type:0 = IEEE-802 Thu Dec 20 01:10:08 2018 : Debug: (138) Tunnel-Private-Group-Id:0 = "14" Thu Dec 20 01:10:08 2018 : Debug: (138) EAP-Message = 0x0207007b19001703020070493c43a0045e1a736402d6353c2ebfd02b02b3da47074e8043e42814d384055eb07d8a3fdf5fc763651fee8a9c19e2525e0450f5bee24195a432757be658ec4fec63f0d1a904eaed55de4f98bc097aca893e67f8761a530e374122b3ba2c61eab23cf1af3ecd9ab8edf2907b Thu Dec 20 01:10:08 2018 : Debug: (138) State = 0x9a0fd4fc9e08cd9b875e606333810d4e Thu Dec 20 01:10:08 2018 : Debug: (138) Message-Authenticator = 0x3b8a82762eef0a453f82a36821b263f2 Thu Dec 20 01:10:08 2018 : Debug: (138) session-state: No cached attributes Thu Dec 20 01:10:08 2018 : Debug: (138) # Executing section authorize from file /etc/raddb/sites-enabled/default Thu Dec 20 01:10:08 2018 : Debug: (138) authorize { Thu Dec 20 01:10:08 2018 : Debug: (138) if (!control:Cleartext-Password && &User-Password) { Thu Dec 20 01:10:08 2018 : Debug: (138) if (!control:Cleartext-Password && &User-Password) -> FALSE Thu Dec 20 01:10:08 2018 : Debug: (138) if (config:User-Password && config:Cleartext-Password) { Thu Dec 20 01:10:08 2018 : Debug: (138) if (config:User-Password && config:Cleartext-Password) -> FALSE Thu Dec 20 01:10:08 2018 : Debug: (138) modsingle[authorize]: calling preprocess (rlm_preprocess) Thu Dec 20 01:10:08 2018 : Debug: (138) modsingle[authorize]: returned from preprocess (rlm_preprocess) Thu Dec 20 01:10:08 2018 : Debug: (138) [preprocess] = ok Thu Dec 20 01:10:08 2018 : Debug: (138) modsingle[authorize]: calling chap (rlm_chap) Thu Dec 20 01:10:08 2018 : Debug: (138) modsingle[authorize]: returned from chap (rlm_chap) Thu Dec 20 01:10:08 2018 : Debug: (138) [chap] = noop Thu Dec 20 01:10:08 2018 : Debug: (138) modsingle[authorize]: calling mschap (rlm_mschap) Thu Dec 20 01:10:08 2018 : Debug: (138) modsingle[authorize]: returned from mschap (rlm_mschap) Thu Dec 20 01:10:08 2018 : Debug: (138) [mschap] = noop Thu Dec 20 01:10:08 2018 : Debug: (138) modsingle[authorize]: calling suffix (rlm_realm) Thu Dec 20 01:10:08 2018 : Debug: (138) suffix: Checking for suffix after "@" Thu Dec 20 01:10:08 2018 : Debug: (138) suffix: Looking up realm " espressif.com" for User-Name = "anonymous(a)espressif.com" Thu Dec 20 01:10:08 2018 : Debug: (138) suffix: No such realm "espressif.com " Thu Dec 20 01:10:08 2018 : Debug: (138) modsingle[authorize]: returned from suffix (rlm_realm) Thu Dec 20 01:10:08 2018 : Debug: (138) [suffix] = noop Thu Dec 20 01:10:08 2018 : Debug: (138) modsingle[authorize]: calling eap (rlm_eap) Thu Dec 20 01:10:08 2018 : Debug: (138) eap: Peer sent EAP Response (code 2) ID 7 length 123 Thu Dec 20 01:10:08 2018 : Debug: (138) eap: Continuing tunnel setup Thu Dec 20 01:10:08 2018 : Debug: (138) modsingle[authorize]: returned from eap (rlm_eap) Thu Dec 20 01:10:08 2018 : Debug: (138) [eap] = ok Thu Dec 20 01:10:08 2018 : Debug: (138) } # authorize = ok Thu Dec 20 01:10:08 2018 : Debug: (138) Found Auth-Type = eap Thu Dec 20 01:10:08 2018 : Debug: (138) # Executing group from file /etc/raddb/sites-enabled/default Thu Dec 20 01:10:08 2018 : Debug: (138) authenticate { Thu Dec 20 01:10:08 2018 : Debug: (138) modsingle[authenticate]: calling eap (rlm_eap) Thu Dec 20 01:10:08 2018 : Debug: (138) eap: Expiring EAP session with state 0x0d5314a80d540ec8 Thu Dec 20 01:10:08 2018 : Debug: (138) eap: Finished EAP session with state 0x9a0fd4fc9e08cd9b Thu Dec 20 01:10:08 2018 : Debug: (138) eap: Previous EAP request found for state 0x9a0fd4fc9e08cd9b, released from the list Thu Dec 20 01:10:08 2018 : Debug: (138) eap: Peer sent packet with method EAP PEAP (25) Thu Dec 20 01:10:08 2018 : Debug: (138) eap: Calling submodule eap_peap to process data Thu Dec 20 01:10:08 2018 : Debug: (138) eap_peap: Continuing EAP-TLS Thu Dec 20 01:10:08 2018 : Debug: (138) eap_peap: Peer sent flags --- Thu Dec 20 01:10:08 2018 : Debug: (138) eap_peap: [eaptls verify] = ok Thu Dec 20 01:10:08 2018 : Debug: (138) eap_peap: Done initial handshake Thu Dec 20 01:10:08 2018 : Debug: Ignoring cbtls_msg call with pseudo content type 256, version 0 Thu Dec 20 01:10:08 2018 : Debug: (138) eap_peap: [eaptls process] = ok Thu Dec 20 01:10:08 2018 : Debug: (138) eap_peap: Session established. Decoding tunneled attributes Thu Dec 20 01:10:08 2018 : Debug: (138) eap_peap: PEAP state phase2 Thu Dec 20 01:10:08 2018 : Debug: (138) eap_peap: EAP method MSCHAPv2 (26) Thu Dec 20 01:10:08 2018 : Debug: (138) eap_peap: Got tunneled request Thu Dec 20 01:10:08 2018 : Debug: (138) eap_peap: EAP-Message = 0x020700441a0207003f3199f6449a50fa3b50be389565dde6ae4b0000000000000000e78496d30625840ded712d0b260d96bead07a7fdd950530a00792e6c696c656b6f76 Thu Dec 20 01:10:08 2018 : Debug: (138) eap_peap: Setting User-Name to testlogin Thu Dec 20 01:10:08 2018 : Debug: (138) eap_peap: Sending tunneled request to default Thu Dec 20 01:10:08 2018 : Debug: (138) eap_peap: EAP-Message = 0x020700441a0207003f3199f6449a50fa3b50be389565dde6ae4b0000000000000000e78496d30625840ded712d0b260d96bead07a7fdd950530a00792e6c696c656b6f76 Thu Dec 20 01:10:08 2018 : Debug: (138) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 Thu Dec 20 01:10:08 2018 : Debug: (138) eap_peap: User-Name = “testlogin" Thu Dec 20 01:10:08 2018 : Debug: (138) eap_peap: State = 0x0d5314a80d540ec8eca17483a9cfe203 Thu Dec 20 01:10:08 2018 : Debug: (138) Virtual server default received request Thu Dec 20 01:10:08 2018 : Debug: (138) EAP-Message = 0x020700441a0207003f3199f6449a50fa3b50be389565dde6ae4b0000000000000000e78496d30625840ded712d0b260d96bead07a7fdd950530a00792e6c696c656b6f76 Thu Dec 20 01:10:08 2018 : Debug: (138) FreeRADIUS-Proxied-To = 127.0.0.1 Thu Dec 20 01:10:08 2018 : Debug: (138) User-Name = "testlogin " Thu Dec 20 01:10:08 2018 : Debug: (138) State = 0x0d5314a80d540ec8eca17483a9cfe203 Thu Dec 20 01:10:08 2018 : Debug: (138) server default { Thu Dec 20 01:10:08 2018 : Debug: (138) session-state: No cached attributes Thu Dec 20 01:10:08 2018 : Debug: (138) # Executing section authorize from file /etc/raddb/sites-enabled/default Thu Dec 20 01:10:08 2018 : Debug: (138) authorize { Thu Dec 20 01:10:08 2018 : Debug: (138) if (!control:Cleartext-Password && &User-Password) { Thu Dec 20 01:10:08 2018 : Debug: (138) if (!control:Cleartext-Password && &User-Password) -> FALSE Thu Dec 20 01:10:08 2018 : Debug: (138) if (config:User-Password && config:Cleartext-Password) { Thu Dec 20 01:10:08 2018 : Debug: (138) if (config:User-Password && config:Cleartext-Password) -> FALSE Thu Dec 20 01:10:08 2018 : Debug: (138) modsingle[authorize]: calling preprocess (rlm_preprocess) Thu Dec 20 01:10:08 2018 : Debug: (138) modsingle[authorize]: returned from preprocess (rlm_preprocess) Thu Dec 20 01:10:08 2018 : Debug: (138) [preprocess] = ok Thu Dec 20 01:10:08 2018 : Debug: (138) modsingle[authorize]: calling chap (rlm_chap) Thu Dec 20 01:10:08 2018 : Debug: (138) modsingle[authorize]: returned from chap (rlm_chap) Thu Dec 20 01:10:08 2018 : Debug: (138) [chap] = noop Thu Dec 20 01:10:08 2018 : Debug: (138) modsingle[authorize]: calling mschap (rlm_mschap) Thu Dec 20 01:10:08 2018 : Debug: (138) modsingle[authorize]: returned from mschap (rlm_mschap) Thu Dec 20 01:10:08 2018 : Debug: (138) [mschap] = noop Thu Dec 20 01:10:08 2018 : Debug: (138) modsingle[authorize]: calling suffix (rlm_realm) Thu Dec 20 01:10:08 2018 : Debug: (138) suffix: Checking for suffix after "@" Thu Dec 20 01:10:08 2018 : Debug: (138) suffix: No '@' in User-Name = “testlogin", looking up realm NULL Thu Dec 20 01:10:08 2018 : Debug: (138) suffix: No such realm "NULL" Thu Dec 20 01:10:08 2018 : Debug: (138) modsingle[authorize]: returned from suffix (rlm_realm) Thu Dec 20 01:10:08 2018 : Debug: (138) [suffix] = noop Thu Dec 20 01:10:08 2018 : Debug: (138) modsingle[authorize]: calling eap (rlm_eap) Thu Dec 20 01:10:08 2018 : Debug: (138) eap: Peer sent EAP Response (code 2) ID 7 length 68 Thu Dec 20 01:10:08 2018 : Debug: (138) eap: No EAP Start, assuming it's an on-going EAP conversation Thu Dec 20 01:10:08 2018 : Debug: (138) modsingle[authorize]: returned from eap (rlm_eap) Thu Dec 20 01:10:08 2018 : Debug: (138) [eap] = updated Thu Dec 20 01:10:08 2018 : Debug: (138) modsingle[authorize]: calling sql-wifi (rlm_sql) Thu Dec 20 01:10:08 2018 : Debug: %{User-Name} Thu Dec 20 01:10:08 2018 : Debug: Parsed xlat tree: Thu Dec 20 01:10:08 2018 : Debug: attribute --> User-Name Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: EXPAND %{User-Name} Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: --> testlogin Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: SQL-User-Name set to ’testlogin' Thu Dec 20 01:10:08 2018 : Info: rlm_sql (sql-wifi): Closing connection (28): Hit idle_timeout, was idle for 80 seconds Thu Dec 20 01:10:08 2018 : Debug: rlm_sql (sql-wifi): You probably need to lower "min" Thu Dec 20 01:10:08 2018 : Debug: rlm_sql_mysql: Socket destructor called, closing socket Thu Dec 20 01:10:08 2018 : Debug: rlm_sql (sql-wifi): Reserved connection (19) Thu Dec 20 01:10:08 2018 : Debug: SELECT wifi_id as id, UserName, 'NT-Password' as attribute, pass_hash, ':=' as op FROM userstable WHERE username = '%{SQL-User-Name}' ORDER BY id Thu Dec 20 01:10:08 2018 : Debug: Parsed xlat tree: Thu Dec 20 01:10:08 2018 : Debug: literal --> SELECT wifi_id as id, UserName, 'NT-Password' as attribute, pass_hash, ':=' as op FROM userstable WHERE username = ' Thu Dec 20 01:10:08 2018 : Debug: attribute --> SQL-User-Name Thu Dec 20 01:10:08 2018 : Debug: literal --> ' ORDER BY id Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: EXPAND SELECT wifi_id as id, UserName, 'NT-Password' as attribute, pass_hash, ':=' as op FROM userstable WHERE username = '%{SQL-User-Name}' ORDER BY id Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: --> SELECT wifi_id as id, UserName, 'NT-Password' as attribute, pass_hash, ':=' as op FROM userstable WHERE username = ’testlogin' ORDER BY id Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: Executing select query: SELECT wifi_id as id, UserName, 'NT-Password' as attribute, pass_hash, ':=' as op FROM userstable WHERE username = ’testlogin' ORDER BY id Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: User found in radcheck table Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: Conditional check items matched, merging assignment check items Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: NT-Password := 0x3161666532333532663366363365333136376163646230306136646366386235 Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: ::: FROM 1 TO 1 MAX 2 Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: ::: Examining NT-Password Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: ::: APPENDING NT-Password FROM 0 TO 1 Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: ::: TO in 1 out 1 Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: ::: to[0] = Auth-Type Thu Dec 20 01:10:08 2018 : Debug: SELECT wifi_id as id, username, 'NT-Password' as attribute, pass_hash, ':=' as op FROM userstable WHERE username = '%{SQL-User-Name}' ORDER BY id Thu Dec 20 01:10:08 2018 : Debug: Parsed xlat tree: Thu Dec 20 01:10:08 2018 : Debug: literal --> SELECT wifi_id as id, username, 'NT-Password' as attribute, pass_hash, ':=' as op FROM userstable WHERE username = ' Thu Dec 20 01:10:08 2018 : Debug: attribute --> SQL-User-Name Thu Dec 20 01:10:08 2018 : Debug: literal --> ' ORDER BY id Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: EXPAND SELECT wifi_id as id, username, 'NT-Password' as attribute, pass_hash, ':=' as op FROM userstable WHERE username = '%{SQL-User-Name}' ORDER BY id Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: --> SELECT wifi_id as id, username, 'NT-Password' as attribute, pass_hash, ':=' as op FROM userstable WHERE username = ’testlogin' ORDER BY id Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: Executing select query: SELECT wifi_id as id, username, 'NT-Password' as attribute, pass_hash, ':=' as op FROM userstable WHERE username = ’testlogin' ORDER BY id Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: User found in radreply table, merging reply items Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: NT-Password := 0x3161666532333532663366363365333136376163646230306136646366386235 Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: ::: FROM 1 TO 0 MAX 1 Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: ::: Examining NT-Password Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: ::: APPENDING NT-Password FROM 0 TO 0 Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: ::: TO in 0 out 0 Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: ... falling-through to group processing Thu Dec 20 01:10:08 2018 : Debug: SELECT 'OfficeWifi' as GroupName FROM userstable WHERE UserName='%{SQL-User-Name}' Thu Dec 20 01:10:08 2018 : Debug: Parsed xlat tree: Thu Dec 20 01:10:08 2018 : Debug: literal --> SELECT 'OfficeWifi' as GroupName FROM userstable WHERE UserName=' Thu Dec 20 01:10:08 2018 : Debug: attribute --> SQL-User-Name Thu Dec 20 01:10:08 2018 : Debug: literal --> ' Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: EXPAND SELECT 'OfficeWifi' as GroupName FROM userstable WHERE UserName='%{SQL-User-Name}' Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: --> SELECT 'OfficeWifi' as GroupName FROM userstable WHERE UserName='testlogin' Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: Executing select query: SELECT 'OfficeWifi' as GroupName FROM userstable WHERE UserName='testlogin' Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: User found in the group table Thu Dec 20 01:10:08 2018 : Debug: SELECT wifi_id as id, 'OfficeWifi' as GroupName, 'NT-Password' as attribute, password, ':=' as op FROM userstable WHERE Username = '%{SQL-User-Name}' ORDER BY id Thu Dec 20 01:10:08 2018 : Debug: Parsed xlat tree: Thu Dec 20 01:10:08 2018 : Debug: literal --> SELECT wifi_id as id, 'OfficeWifi' as GroupName, 'NT-Password' as attribute, password, ':=' as op FROM userstable WHERE Username = ' Thu Dec 20 01:10:08 2018 : Debug: attribute --> SQL-User-Name Thu Dec 20 01:10:08 2018 : Debug: literal --> ' ORDER BY id Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: EXPAND SELECT wifi_id as id, 'OfficeWifi' as GroupName, 'NT-Password' as attribute, password, ':=' as op FROM userstable WHERE Username = '%{SQL-User-Name}' ORDER BY id Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: --> SELECT wifi_id as id, 'OfficeWifi' as GroupName, 'NT-Password' as attribute, password, ':=' as op FROM userstable WHERE Username = ’testlogin' ORDER BY id Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: Executing select query: SELECT wifi_id as id, 'OfficeWifi' as GroupName, 'NT-Password' as attribute, password, ':=' as op FROM userstable WHERE Username = 'testlogin' ORDER BY id Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: Group "OfficeWifi": Conditional check items matched Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: Group "OfficeWifi": Merging assignment check items Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: NT-Password := 0x696e616d6974414c545a694e3039393021 Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: ::: FROM 1 TO 2 MAX 3 Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: ::: Examining NT-Password Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: ::: OVERWRITING NT-Password FROM 0 TO 1 Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: ::: TO in 2 out 2 Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: ::: to[0] = Auth-Type Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: ::: to[1] = NT-Password Thu Dec 20 01:10:08 2018 : Debug: SELECT wifi_id as id, 'OfficeWifi' as GroupName, 'NT-Password' as attribute, password, ':=' as op FROM userstable WHERE Username = '%{SQL-User-Name}' ORDER BY id Thu Dec 20 01:10:08 2018 : Debug: Parsed xlat tree: Thu Dec 20 01:10:08 2018 : Debug: literal --> SELECT wifi_id as id, 'OfficeWifi' as GroupName, 'NT-Password' as attribute, password, ':=' as op FROM userstable WHERE Username = ' Thu Dec 20 01:10:08 2018 : Debug: attribute --> SQL-User-Name Thu Dec 20 01:10:08 2018 : Debug: literal --> ' ORDER BY id Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: EXPAND SELECT wifi_id as id, 'OfficeWifi' as GroupName, 'NT-Password' as attribute, password, ':=' as op FROM userstable WHERE Username = '%{SQL-User-Name}' ORDER BY id Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: --> SELECT wifi_id as id, 'OfficeWifi' as GroupName, 'NT-Password' as attribute, password, ':=' as op FROM userstable WHERE Username = 'testlogin' ORDER BY id Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: Executing select query: SELECT wifi_id as id, 'OfficeWifi' as GroupName, 'NT-Password' as attribute, password, ':=' as op FROM userstable WHERE Username = 'testlogin' ORDER BY id Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: Group "OfficeWifi": Merging reply items Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: NT-Password := 0x696e616d6974414c545a694e3039393021 Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: ::: FROM 1 TO 1 MAX 2 Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: ::: Examining NT-Password Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: ::: OVERWRITING NT-Password FROM 0 TO 0 Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: ::: TO in 1 out 1 Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: ::: to[0] = NT-Password Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: ... falling-through to profile processing Thu Dec 20 01:10:08 2018 : Debug: rlm_sql (sql-wifi): Released connection (19) Thu Dec 20 01:10:08 2018 : Info: Need 1 more connections to reach min connections (5) Thu Dec 20 01:10:08 2018 : Info: rlm_sql (sql-wifi): Opening additional connection (30), 1 of 6 pending slots used Thu Dec 20 01:10:08 2018 : Debug: rlm_sql_mysql: Starting connect to MySQL server Thu Dec 20 01:10:08 2018 : Debug: rlm_sql_mysql: Connected to database 'vpn_wifi' on 127.0.0.1 via TCP/IP, server version 5.7.19-17-log, protocol version 10 Thu Dec 20 01:10:08 2018 : Debug: (138) modsingle[authorize]: returned from sql-wifi (rlm_sql) Thu Dec 20 01:10:08 2018 : Debug: (138) [sql-wifi] = ok Thu Dec 20 01:10:08 2018 : Debug: (138) modsingle[authorize]: calling pap (rlm_pap) Thu Dec 20 01:10:08 2018 : WARNING: (138) pap: Auth-Type already set. Not setting to PAP Thu Dec 20 01:10:08 2018 : Debug: (138) modsingle[authorize]: returned from pap (rlm_pap) Thu Dec 20 01:10:08 2018 : Debug: (138) [pap] = noop Thu Dec 20 01:10:08 2018 : Debug: (138) } # authorize = updated Thu Dec 20 01:10:08 2018 : Debug: (138) Found Auth-Type = eap Thu Dec 20 01:10:08 2018 : Debug: (138) # Executing group from file /etc/raddb/sites-enabled/default Thu Dec 20 01:10:08 2018 : Debug: (138) authenticate { Thu Dec 20 01:10:08 2018 : Debug: (138) modsingle[authenticate]: calling eap (rlm_eap) Thu Dec 20 01:10:08 2018 : Debug: (138) eap: Expiring EAP session with state 0x0d5314a80d540ec8 Thu Dec 20 01:10:08 2018 : Debug: (138) eap: Finished EAP session with state 0x0d5314a80d540ec8 Thu Dec 20 01:10:08 2018 : Debug: (138) eap: Previous EAP request found for state 0x0d5314a80d540ec8, released from the list Thu Dec 20 01:10:08 2018 : Debug: (138) eap: Peer sent packet with method EAP MSCHAPv2 (26) Thu Dec 20 01:10:08 2018 : Debug: (138) eap: Calling submodule eap_mschapv2 to process data Thu Dec 20 01:10:08 2018 : Debug: (138) eap_mschapv2: # Executing group from file /etc/raddb/sites-enabled/default Thu Dec 20 01:10:08 2018 : Debug: (138) eap_mschapv2: Auth-Type MS-CHAP { Thu Dec 20 01:10:08 2018 : Debug: (138) eap_mschapv2: modsingle[authenticate]: calling mschap (rlm_mschap) Thu Dec 20 01:10:08 2018 : WARNING: (138) mschap: NT-Password found but incorrect length, expected 16 bytes got 17 bytes. Authentication may fail Thu Dec 20 01:10:08 2018 : WARNING: (138) mschap: No Cleartext-Password configured. Cannot create NT-Password Thu Dec 20 01:10:08 2018 : WARNING: (138) mschap: No Cleartext-Password configured. Cannot create LM-Password Thu Dec 20 01:10:08 2018 : Debug: (138) mschap: Creating challenge hash with username: testlogin Thu Dec 20 01:10:08 2018 : Debug: (138) mschap: Client is using MS-CHAPv2 Thu Dec 20 01:10:08 2018 : ERROR: (138) mschap: FAILED: No NT/LM-Password. Cannot perform authentication Thu Dec 20 01:10:08 2018 : ERROR: (138) mschap: MS-CHAP2-Response is incorrect Thu Dec 20 01:10:08 2018 : Debug: (138) modsingle[authenticate]: returned from mschap (rlm_mschap) Thu Dec 20 01:10:08 2018 : Debug: (138) [mschap] = reject Thu Dec 20 01:10:08 2018 : Debug: (138) } # Auth-Type MS-CHAP = reject Thu Dec 20 01:10:08 2018 : Debug: (138) eap: Sending EAP Failure (code 4) ID 7 length 4 Thu Dec 20 01:10:08 2018 : Debug: (138) eap: Freeing handler Thu Dec 20 01:10:08 2018 : Debug: (138) modsingle[authenticate]: returned from eap (rlm_eap) Thu Dec 20 01:10:08 2018 : Debug: (138) [eap] = reject Thu Dec 20 01:10:08 2018 : Debug: (138) } # authenticate = reject Thu Dec 20 01:10:08 2018 : Debug: (138) Failed to authenticate the user Thu Dec 20 01:10:08 2018 : Debug: (138) Using Post-Auth-Type Reject Thu Dec 20 01:10:08 2018 : Debug: (138) Post-Auth-Type sub-section not found. Ignoring. Thu Dec 20 01:10:08 2018 : Auth: (138) Login incorrect (mschap: FAILED: No NT/LM-Password. Cannot perform authentication): [testlogin/<via Auth-Type = eap>] (from client WC-5508_ port 0 via TLS tunnel) Thu Dec 20 01:10:08 2018 : Debug: (138) } # server default Thu Dec 20 01:10:08 2018 : Debug: (138) Virtual server sending reply Thu Dec 20 01:10:08 2018 : Debug: (138) NT-Password = 0x696e616d6974414c545a694e3039393021 Thu Dec 20 01:10:08 2018 : Debug: (138) MS-CHAP-Error = "\007E=691 R=1 C=86e3f7442e804d519197bbbf0301334f V=3 M=Authentication rejected" Thu Dec 20 01:10:08 2018 : Debug: (138) EAP-Message = 0x04070004 Thu Dec 20 01:10:08 2018 : Debug: (138) Message-Authenticator = 0x00000000000000000000000000000000 Thu Dec 20 01:10:08 2018 : Debug: (138) eap_peap: Got tunneled reply code 3 Thu Dec 20 01:10:08 2018 : Debug: (138) eap_peap: NT-Password = 0x696e616d6974414c545a694e3039393021 Thu Dec 20 01:10:08 2018 : Debug: (138) eap_peap: MS-CHAP-Error = "\007E=691 R=1 C=86e3f7442e804d519197bbbf0301334f V=3 M=Authentication rejected" Thu Dec 20 01:10:08 2018 : Debug: (138) eap_peap: EAP-Message = 0x04070004 Thu Dec 20 01:10:08 2018 : Debug: (138) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 Thu Dec 20 01:10:08 2018 : Debug: (138) eap_peap: Got tunneled reply RADIUS code 3 Thu Dec 20 01:10:08 2018 : Debug: (138) eap_peap: NT-Password = 0x696e616d6974414c545a694e3039393021 Thu Dec 20 01:10:08 2018 : Debug: (138) eap_peap: MS-CHAP-Error = "\007E=691 R=1 C=86e3f7442e804d519197bbbf0301334f V=3 M=Authentication rejected" Thu Dec 20 01:10:08 2018 : Debug: (138) eap_peap: EAP-Message = 0x04070004 Thu Dec 20 01:10:08 2018 : Debug: (138) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 Thu Dec 20 01:10:08 2018 : Debug: (138) eap_peap: Tunneled authentication was rejected Thu Dec 20 01:10:08 2018 : Debug: (138) eap_peap: FAILURE Thu Dec 20 01:10:08 2018 : Debug: Ignoring cbtls_msg call with pseudo content type 256, version 0 Thu Dec 20 01:10:08 2018 : Debug: (138) eap: Sending EAP Request (code 1) ID 8 length 59 Thu Dec 20 01:10:08 2018 : Debug: (138) eap: EAP session adding &reply:State = 0x9a0fd4fc9f07cd9b Thu Dec 20 01:10:08 2018 : Debug: (138) modsingle[authenticate]: returned from eap (rlm_eap) Thu Dec 20 01:10:08 2018 : Debug: (138) [eap] = handled Thu Dec 20 01:10:08 2018 : Debug: (138) } # authenticate = handled Thu Dec 20 01:10:08 2018 : Debug: (138) Using Post-Auth-Type Challenge Thu Dec 20 01:10:08 2018 : Debug: (138) Post-Auth-Type sub-section not found. Ignoring. Thu Dec 20 01:10:08 2018 : Debug: (138) session-state: Nothing to cache Could you please explain, what for you mean with "It looks like you've taken the input password, and then tried to use that as the NT hash."? Which way I have to use for my case? And what exactly meaning strings below: Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: NT-Password := 0x696e616d6974414c545a694e3039393021 Thu Dec 20 01:10:08 2018 : Debug: (138) sql-wifi: NT-Password := 0x3161666532333532663366363365333136376163646230306136646366386235 That isn't my real hashes. Yes, I used the same hash as you provided via smbencrypt. I can provide with you my full configuration file as well is it could help. чт, 20 дек. 2018 г. в 11:40, Alan DeKok <aland(a)deployingradius.com>: > On Dec 20, 2018, at 2:47 AM, Anton Kiryushkin <swood(a)fotofor.biz> wrote: > > > > Hello, Matthew. > > > > Yes, I have the same fear about the hash. > > I made it in the two ways: > > - hash=$(printf '%s' "${pass}" | iconv -t utf16le | openssl md4 > 2>/dev/null > > | awk '{print $NF}') > > - smbencrypt > > > > Both ways are equal. Which method is right in my case? > > smbencrypt it preferred. I use: > > $ smbencrypt hello > LM Hash NT Hash > -------------------------------- -------------------------------- > FDA95FBECA288D44AAD3B435B51404EE 066DDFD4EF0E9CD7C256FE77191EF43C > > And the use the NT hash. > > There is just no way that an input password ends up being *all* ASCII > characters after hashing. It looks like you've taken the input password, > and then tried to use that as the NT hash. > > Alan DeKok. > > > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html -- Best regards, Anton Kiryushkin ------------------------------ Subject: Digest Footer - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html ------------------------------ End of Freeradius-Users Digest, Vol 164, Issue 43 *************************************************

1 0

why user dosn`t connect ?
by تعلم البرمجة 20 Dec '18

20 Dec '18

hello , i have username test and password test in database but this user after authenticated success disconnect ! sorry for my english and this is my log Thu Dec 20 15:55:19 2018 : Debug: (0) Found Auth-Type = PAP Thu Dec 20 15:55:19 2018 : Debug: (0) # Executing group from file /etc/freeradius/sites-enabled/default Thu Dec 20 15:55:19 2018 : Debug: (0) Auth-Type PAP { Thu Dec 20 15:55:19 2018 : Debug: (0) modsingle[authenticate]: calling pap (rlm_pap) for request 0 Thu Dec 20 15:55:19 2018 : Debug: (0) pap: Login attempt with password "test" (4) Thu Dec 20 15:55:19 2018 : Debug: (0) pap: Comparing with "known good" Cleartext-Password "test" (4) Thu Dec 20 15:55:19 2018 : Debug: (0) pap: User authenticated successfully Thu Dec 20 15:55:19 2018 : Debug: (0) modsingle[authenticate]: returned from pap (rlm_pap) for request 0 Thu Dec 20 15:55:19 2018 : Debug: (0) [pap] = ok Thu Dec 20 15:55:19 2018 : Debug: (0) } # Auth-Type PAP = ok Thu Dec 20 15:55:19 2018 : Debug: (0) # Executing section session from file /etc/freeradius/sites-enabled/default Thu Dec 20 15:55:19 2018 : Debug: (0) session { Thu Dec 20 15:55:19 2018 : Debug: (0) modsingle[session]: calling sql (rlm_sql) for request 0 Thu Dec 20 15:55:19 2018 : Debug: %{User-Name} Thu Dec 20 15:55:19 2018 : Debug: Parsed xlat tree: Thu Dec 20 15:55:19 2018 : Debug: attribute --> User-Name Thu Dec 20 15:55:19 2018 : Debug: (0) sql: EXPAND %{User-Name} Thu Dec 20 15:55:19 2018 : Debug: (0) sql: --> test Thu Dec 20 15:55:19 2018 : Debug: (0) sql: SQL-User-Name set to 'test' Thu Dec 20 15:55:19 2018 : Debug: (0) sql: ::: FROM 1 TO 13 MAX 14 Thu Dec 20 15:55:19 2018 : Debug: (0) sql: ::: Examining SQL-User-Name Thu Dec 20 15:55:19 2018 : Debug: (0) sql: ::: APPENDING SQL-User-Name FROM 0 TO 13 Thu Dec 20 15:55:19 2018 : Debug: (0) sql: ::: TO in 13 out 13 Thu Dec 20 15:55:19 2018 : Debug: (0) sql: ::: to[0] = NAS-IP-Address Thu Dec 20 15:55:19 2018 : Debug: (0) sql: ::: to[1] = Framed-Protocol Thu Dec 20 15:55:19 2018 : Debug: (0) sql: ::: to[2] = Service-Type Thu Dec 20 15:55:19 2018 : Debug: (0) sql: ::: to[3] = Framed-IP-Address Thu Dec 20 15:55:19 2018 : Debug: (0) sql: ::: to[4] = Calling-Station-Id Thu Dec 20 15:55:19 2018 : Debug: (0) sql: ::: to[5] = NAS-Identifier Thu Dec 20 15:55:19 2018 : Debug: (0) sql: ::: to[6] = Acct-Session-Id Thu Dec 20 15:55:19 2018 : Debug: (0) sql: ::: to[7] = NAS-Port-Type Thu Dec 20 15:55:19 2018 : Debug: (0) sql: ::: to[8] = Acct-Status-Type Thu Dec 20 15:55:19 2018 : Debug: (0) sql: ::: to[9] = Acct-Delay-Time Thu Dec 20 15:55:19 2018 : Debug: (0) sql: ::: to[10] = Port-Limit Thu Dec 20 15:55:19 2018 : Debug: (0) sql: ::: to[11] = User-Name Thu Dec 20 15:55:19 2018 : Debug: (0) sql: ::: to[12] = User-Password Thu Dec 20 15:55:19 2018 : Debug: SELECT COUNT(*) FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL Thu Dec 20 15:55:19 2018 : Debug: Parsed xlat tree: Thu Dec 20 15:55:19 2018 : Debug: literal --> SELECT COUNT(*) FROM radacct WHERE username = ' Thu Dec 20 15:55:19 2018 : Debug: attribute --> SQL-User-Name Thu Dec 20 15:55:19 2018 : Debug: literal --> ' AND acctstoptime IS NULL Thu Dec 20 15:55:19 2018 : Debug: (0) sql: EXPAND SELECT COUNT(*) FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL Thu Dec 20 15:55:19 2018 : Debug: (0) sql: --> SELECT COUNT(*) FROM radacct WHERE username = 'test' AND acctstoptime IS NULL Thu Dec 20 15:55:19 2018 : Debug: rlm_sql (sql): Reserved connection (2) Thu Dec 20 15:55:19 2018 : Debug: (0) sql: Executing select query: SELECT COUNT(*) FROM radacct WHERE username = 'test' AND acctstoptime IS NULL Thu Dec 20 15:55:19 2018 : Debug: rlm_sql (sql): Released connection (2) Thu Dec 20 15:55:19 2018 : Debug: (0) modsingle[session]: returned from sql (rlm_sql) for request 0 Thu Dec 20 15:55:19 2018 : Debug: (0) [sql] = ok Thu Dec 20 15:55:19 2018 : Debug: (0) } # session = ok Thu Dec 20 15:55:19 2018 : Debug: (0) # Executing section post-auth from file /etc/freeradius/sites-enabled/default Thu Dec 20 15:55:19 2018 : Debug: (0) post-auth { Thu Dec 20 15:55:19 2018 : Debug: (0) modsingle[post-auth]: calling sql (rlm_sql) for request 0 Thu Dec 20 15:55:19 2018 : Debug: .query Thu Dec 20 15:55:19 2018 : Debug: Parsed xlat tree: Thu Dec 20 15:55:19 2018 : Debug: literal --> .query Thu Dec 20 15:55:19 2018 : Debug: (0) sql: EXPAND .query Thu Dec 20 15:55:19 2018 : Debug: (0) sql: --> .query Thu Dec 20 15:55:19 2018 : Debug: (0) sql: Using query template 'query' Thu Dec 20 15:55:19 2018 : Debug: rlm_sql (sql): Reserved connection (3) Thu Dec 20 15:55:19 2018 : Debug: %{User-Name} Thu Dec 20 15:55:19 2018 : Debug: Parsed xlat tree: Thu Dec 20 15:55:19 2018 : Debug: attribute --> User-Name Thu Dec 20 15:55:19 2018 : Debug: (0) sql: EXPAND %{User-Name} Thu Dec 20 15:55:19 2018 : Debug: (0) sql: --> test Thu Dec 20 15:55:19 2018 : Debug: (0) sql: SQL-User-Name set to 'test' Thu Dec 20 15:55:19 2018 : Debug: (0) sql: ::: FROM 1 TO 13 MAX 14 Thu Dec 20 15:55:19 2018 : Debug: (0) sql: ::: Examining SQL-User-Name Thu Dec 20 15:55:19 2018 : Debug: (0) sql: ::: APPENDING SQL-User-Name FROM 0 TO 13 Thu Dec 20 15:55:19 2018 : Debug: (0) sql: ::: TO in 13 out 13 Thu Dec 20 15:55:19 2018 : Debug: (0) sql: ::: to[0] = NAS-IP-Address Thu Dec 20 15:55:19 2018 : Debug: (0) sql: ::: to[1] = Framed-Protocol Thu Dec 20 15:55:19 2018 : Debug: (0) sql: ::: to[2] = Service-Type Thu Dec 20 15:55:19 2018 : Debug: (0) sql: ::: to[3] = Framed-IP-Address Thu Dec 20 15:55:19 2018 : Debug: (0) sql: ::: to[4] = Calling-Station-Id Thu Dec 20 15:55:19 2018 : Debug: (0) sql: ::: to[5] = NAS-Identifier Thu Dec 20 15:55:19 2018 : Debug: (0) sql: ::: to[6] = Acct-Session-Id Thu Dec 20 15:55:19 2018 : Debug: (0) sql: ::: to[7] = NAS-Port-Type Thu Dec 20 15:55:19 2018 : Debug: (0) sql: ::: to[8] = Acct-Status-Type Thu Dec 20 15:55:19 2018 : Debug: (0) sql: ::: to[9] = Acct-Delay-Time Thu Dec 20 15:55:19 2018 : Debug: (0) sql: ::: to[10] = Port-Limit Thu Dec 20 15:55:19 2018 : Debug: (0) sql: ::: to[11] = User-Name Thu Dec 20 15:55:19 2018 : Debug: (0) sql: ::: to[12] = User-Password Thu Dec 20 15:55:19 2018 : Debug: INSERT INTO radpostauth (username, pass, reply, authdate, nasipaddress, macaddress,framedipaddress) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', CURRENT_TIMESTAMP(),'%{NAS-IP-Address}', '%{Calling-Station-ID}', '%{Framed-IP-Address}' ) Thu Dec 20 15:55:19 2018 : Debug: Parsed xlat tree: Thu Dec 20 15:55:19 2018 : Debug: literal --> INSERT INTO radpostauth (username, pass, reply, authdate, nasipaddress, macaddress,framedipaddress) VALUES ( ' Thu Dec 20 15:55:19 2018 : Debug: attribute --> SQL-User-Name Thu Dec 20 15:55:19 2018 : Debug: literal --> ', ' Thu Dec 20 15:55:19 2018 : Debug: if { Thu Dec 20 15:55:19 2018 : Debug: attribute --> User-Password Thu Dec 20 15:55:19 2018 : Debug: } Thu Dec 20 15:55:19 2018 : Debug: else { Thu Dec 20 15:55:19 2018 : Debug: attribute --> CHAP-Password Thu Dec 20 15:55:19 2018 : Debug: } Thu Dec 20 15:55:19 2018 : Debug: literal --> ', ' Thu Dec 20 15:55:19 2018 : Debug: attribute --> Packet-Type Thu Dec 20 15:55:19 2018 : Debug: literal --> ', CURRENT_TIMESTAMP(),' Thu Dec 20 15:55:19 2018 : Debug: attribute --> NAS-IP-Address Thu Dec 20 15:55:19 2018 : Debug: literal --> ', ' Thu Dec 20 15:55:19 2018 : Debug: attribute --> Calling-Station-Id Thu Dec 20 15:55:19 2018 : Debug: literal --> ', ' Thu Dec 20 15:55:19 2018 : Debug: attribute --> Framed-IP-Address Thu Dec 20 15:55:19 2018 : Debug: literal --> ' ) Thu Dec 20 15:55:19 2018 : Debug: (0) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate, nasipaddress, macaddress,framedipaddress) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', CURRENT_TIMESTAMP(),'%{NAS-IP-Address}', '%{Calling-Station-ID}', '%{Framed-IP-Address}' ) Thu Dec 20 15:55:19 2018 : Debug: (0) sql: --> INSERT INTO radpostauth (username, pass, reply, authdate, nasipaddress, macaddress,framedipaddress) VALUES ( 'test', 'test', 'Access-Accept', CURRENT_TIMESTAMP(),'10.40.47.1', '10.40.47.200', '10.40.47.200' ) Thu Dec 20 15:55:19 2018 : Debug: (0) sql: Executing query: INSERT INTO radpostauth (username, pass, reply, authdate, nasipaddress, macaddress,framedipaddress) VALUES ( 'test', 'test', 'Access-Accept', CURRENT_TIMESTAMP(),'10.40.47.1', '10.40.47.200', '10.40.47.200' ) Thu Dec 20 15:55:19 2018 : Debug: (0) sql: SQL query returned: success Thu Dec 20 15:55:19 2018 : Debug: (0) sql: 1 record(s) updated Thu Dec 20 15:55:19 2018 : Debug: rlm_sql (sql): Released connection (3) Thu Dec 20 15:55:19 2018 : Debug: (0) modsingle[post-auth]: returned from sql (rlm_sql) for request 0 Thu Dec 20 15:55:19 2018 : Debug: (0) [sql] = ok Thu Dec 20 15:55:19 2018 : Debug: (0) } # post-auth = ok Thu Dec 20 15:55:19 2018 : Debug: (0) Sent Access-Accept Id 1 from 127.0.0.1:1812 to 127.0.0.1:55162 length 0 Thu Dec 20 15:55:19 2018 : Debug: (0) Mikrotik-Rate-Limit := "5120k/0 0/0 0/0 0/0 8" Thu Dec 20 15:55:19 2018 : Debug: (0) Session-Timeout = 2669467 Thu Dec 20 15:55:19 2018 : Debug: (0) Finished request Thu Dec 20 15:55:19 2018 : Debug: Waking up in 4.9 seconds. Thu Dec 20 15:55:24 2018 : Debug: (0) Cleaning up request packet ID 1 with timestamp +5 Thu Dec 20 15:55:24 2018 : Info: Ready to process requests Thu Dec 20 16:11:04 2018 : Debug: (1) Received Access-Request Id 1 from 127.0.0.1:43292 to 127.0.0.1:1812 length 124 Thu Dec 20 16:11:04 2018 : Debug: (1) NAS-IP-Address = 10.40.47.1 Thu Dec 20 16:11:04 2018 : Debug: (1) Framed-Protocol = PPP Thu Dec 20 16:11:04 2018 : Debug: (1) Service-Type = Login-User Thu Dec 20 16:11:04 2018 : Debug: (1) Framed-IP-Address = 10.40.47.200 Thu Dec 20 16:11:04 2018 : Debug: (1) Calling-Station-Id = "10.40.47.200" Thu Dec 20 16:11:04 2018 : Debug: (1) NAS-Identifier = "Ahmed" Thu Dec 20 16:11:04 2018 : Debug: (1) Acct-Session-Id = "fdfsdfsdf" Thu Dec 20 16:11:04 2018 : Debug: (1) NAS-Port-Type = PPPoEoE Thu Dec 20 16:11:04 2018 : Debug: (1) Acct-Status-Type = Interim-Update Thu Dec 20 16:11:04 2018 : Debug: (1) Acct-Delay-Time = 10 Thu Dec 20 16:11:04 2018 : Debug: (1) Port-Limit = 5 Thu Dec 20 16:11:04 2018 : Debug: (1) User-Name = "test" Thu Dec 20 16:11:04 2018 : Debug: (1) User-Password = "test" Thu Dec 20 16:11:04 2018 : Debug: (1) session-state: No State attribute Thu Dec 20 16:11:04 2018 : Debug: (1) # Executing section authorize from file /etc/freeradius/sites-enabled/default Thu Dec 20 16:11:04 2018 : Debug: (1) authorize { Thu Dec 20 16:11:04 2018 : Debug: (1) update { Thu Dec 20 16:11:04 2018 : Debug: (1) Executing: /usr/bin/php5 /var/www/html/set_idle_timeout.php %{User-Name} %{%{User-Password}:-%{Chap-Password}} %{Framed-IP-Address} 3 %{Calling-Station-Id} %{Framed-Protocol} %{NAS-Identifier} : Thu Dec 20 16:11:04 2018 : Debug: %{User-Name} Thu Dec 20 16:11:04 2018 : Debug: Parsed xlat tree: Thu Dec 20 16:11:04 2018 : Debug: attribute --> User-Name Thu Dec 20 16:11:04 2018 : Debug: (1) EXPAND %{User-Name} Thu Dec 20 16:11:04 2018 : Debug: (1) --> test Thu Dec 20 16:11:04 2018 : Debug: %{%{User-Password}:-%{Chap-Password}} Thu Dec 20 16:11:04 2018 : Debug: Parsed xlat tree: Thu Dec 20 16:11:04 2018 : Debug: if { Thu Dec 20 16:11:04 2018 : Debug: attribute --> User-Password Thu Dec 20 16:11:04 2018 : Debug: } Thu Dec 20 16:11:04 2018 : Debug: else { Thu Dec 20 16:11:04 2018 : Debug: attribute --> CHAP-Password Thu Dec 20 16:11:04 2018 : Debug: } Thu Dec 20 16:11:04 2018 : Debug: (1) EXPAND %{%{User-Password}:-%{Chap-Password}} Thu Dec 20 16:11:04 2018 : Debug: (1) --> test Thu Dec 20 16:11:04 2018 : Debug: %{Framed-IP-Address} Thu Dec 20 16:11:04 2018 : Debug: Parsed xlat tree: Thu Dec 20 16:11:04 2018 : Debug: attribute --> Framed-IP-Address Thu Dec 20 16:11:04 2018 : Debug: (1) EXPAND %{Framed-IP-Address} Thu Dec 20 16:11:04 2018 : Debug: (1) --> 10.40.47.200 Thu Dec 20 16:11:04 2018 : Debug: %{Calling-Station-Id} Thu Dec 20 16:11:04 2018 : Debug: Parsed xlat tree: Thu Dec 20 16:11:04 2018 : Debug: attribute --> Calling-Station-Id Thu Dec 20 16:11:04 2018 : Debug: (1) EXPAND %{Calling-Station-Id} Thu Dec 20 16:11:04 2018 : Debug: (1) --> 10.40.47.200 Thu Dec 20 16:11:04 2018 : Debug: %{Framed-Protocol} Thu Dec 20 16:11:04 2018 : Debug: Parsed xlat tree: Thu Dec 20 16:11:04 2018 : Debug: attribute --> Framed-Protocol Thu Dec 20 16:11:04 2018 : Debug: (1) EXPAND %{Framed-Protocol} Thu Dec 20 16:11:04 2018 : Debug: (1) --> PPP Thu Dec 20 16:11:04 2018 : Debug: %{NAS-Identifier} Thu Dec 20 16:11:04 2018 : Debug: Parsed xlat tree: Thu Dec 20 16:11:04 2018 : Debug: attribute --> NAS-Identifier Thu Dec 20 16:11:04 2018 : Debug: (1) EXPAND %{NAS-Identifier} Thu Dec 20 16:11:04 2018 : Debug: (1) --> Ahmed Thu Dec 20 16:11:04 2018 : Debug: (1) Program returned code (0) and output ' Idle-Timeout :='180',Mikrotik-Rate-Limit :="5120k/0 0/0 0/0 0/0 8", Idle-Timeout :='180'' Thu Dec 20 16:11:04 2018 : Debug: (1) control::Idle-Timeout := 180 Thu Dec 20 16:11:04 2018 : Debug: (1) control::Mikrotik-Rate-Limit := 5120k/0 0/0 0/0 0/0 8 Thu Dec 20 16:11:04 2018 : Debug: (1) control::Idle-Timeout := 180 Thu Dec 20 16:11:04 2018 : Debug: (1) } # update = noop Thu Dec 20 16:11:04 2018 : Debug: (1) update reply { Thu Dec 20 16:11:04 2018 : Debug: (1) No attributes updated Thu Dec 20 16:11:04 2018 : Debug: (1) No attributes updated Thu Dec 20 16:11:04 2018 : Debug: (1) No attributes updated Thu Dec 20 16:11:04 2018 : Debug: (1) No attributes updated Thu Dec 20 16:11:04 2018 : Debug: (1) Mikrotik-Rate-Limit := &control:Mikrotik-Rate-Limit -> '5120k/0 0/0 0/0 0/0 8' Thu Dec 20 16:11:04 2018 : Debug: (1) } # update reply = noop Thu Dec 20 16:11:04 2018 : Debug: (1) modsingle[authorize]: calling chap (rlm_chap) for request 1 Thu Dec 20 16:11:04 2018 : Debug: (1) modsingle[authorize]: returned from chap (rlm_chap) for request 1 Thu Dec 20 16:11:04 2018 : Debug: (1) [chap] = noop Thu Dec 20 16:11:04 2018 : Debug: (1) modsingle[authorize]: calling mschap (rlm_mschap) for request 1 Thu Dec 20 16:11:04 2018 : Debug: (1) modsingle[authorize]: returned from mschap (rlm_mschap) for request 1 Thu Dec 20 16:11:04 2018 : Debug: (1) [mschap] = noop Thu Dec 20 16:11:04 2018 : Debug: (1) modsingle[authorize]: calling sql (rlm_sql) for request 1 Thu Dec 20 16:11:04 2018 : Debug: %{User-Name} Thu Dec 20 16:11:04 2018 : Debug: Parsed xlat tree: Thu Dec 20 16:11:04 2018 : Debug: attribute --> User-Name Thu Dec 20 16:11:04 2018 : Debug: (1) sql: EXPAND %{User-Name} Thu Dec 20 16:11:04 2018 : Debug: (1) sql: --> test Thu Dec 20 16:11:04 2018 : Debug: (1) sql: SQL-User-Name set to 'test' Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: FROM 1 TO 13 MAX 14 Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: Examining SQL-User-Name Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: APPENDING SQL-User-Name FROM 0 TO 13 Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: TO in 13 out 13 Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: to[0] = NAS-IP-Address Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: to[1] = Framed-Protocol Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: to[2] = Service-Type Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: to[3] = Framed-IP-Address Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: to[4] = Calling-Station-Id Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: to[5] = NAS-Identifier Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: to[6] = Acct-Session-Id Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: to[7] = NAS-Port-Type Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: to[8] = Acct-Status-Type Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: to[9] = Acct-Delay-Time Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: to[10] = Port-Limit Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: to[11] = User-Name Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: to[12] = User-Password Thu Dec 20 16:11:04 2018 : Info: rlm_sql (sql): Closing connection (4): Hit idle_timeout, was idle for 950 seconds Thu Dec 20 16:11:04 2018 : Debug: rlm_sql (sql): You probably need to lower "min" Thu Dec 20 16:11:04 2018 : Debug: rlm_sql_mysql: Socket destructor called, closing socket Thu Dec 20 16:11:04 2018 : Info: rlm_sql (sql): Closing connection (0): Hit idle_timeout, was idle for 950 seconds Thu Dec 20 16:11:04 2018 : Debug: rlm_sql (sql): You probably need to lower "min" Thu Dec 20 16:11:04 2018 : Debug: rlm_sql_mysql: Socket destructor called, closing socket Thu Dec 20 16:11:04 2018 : Info: rlm_sql (sql): Closing connection (1): Hit idle_timeout, was idle for 945 seconds Thu Dec 20 16:11:04 2018 : Debug: rlm_sql (sql): You probably need to lower "min" Thu Dec 20 16:11:04 2018 : Debug: rlm_sql_mysql: Socket destructor called, closing socket Thu Dec 20 16:11:04 2018 : Info: rlm_sql (sql): Closing connection (2): Hit idle_timeout, was idle for 945 seconds Thu Dec 20 16:11:04 2018 : Debug: rlm_sql (sql): You probably need to lower "min" Thu Dec 20 16:11:04 2018 : Debug: rlm_sql_mysql: Socket destructor called, closing socket Thu Dec 20 16:11:04 2018 : Info: rlm_sql (sql): Closing connection (3): Hit idle_timeout, was idle for 945 seconds Thu Dec 20 16:11:04 2018 : Debug: rlm_sql (sql): You probably need to lower "min" Thu Dec 20 16:11:04 2018 : Debug: rlm_sql_mysql: Socket destructor called, closing socket Thu Dec 20 16:11:04 2018 : Debug: rlm_sql (sql): 0 of 0 connections in use. You may need to increase "spare" Thu Dec 20 16:11:04 2018 : Info: rlm_sql (sql): Opening additional connection (5), 1 of 10 pending slots used Thu Dec 20 16:11:04 2018 : Debug: rlm_sql_mysql: Starting connect to MySQL server Thu Dec 20 16:11:04 2018 : Debug: rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.6.33-0ubuntu0.14.04.1, protocol version 10 Thu Dec 20 16:11:04 2018 : Debug: rlm_sql (sql): Reserved connection (5) Thu Dec 20 16:11:04 2018 : Debug: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}'AND a='0' ORDER BY id Thu Dec 20 16:11:04 2018 : Debug: Parsed xlat tree: Thu Dec 20 16:11:04 2018 : Debug: literal --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = ' Thu Dec 20 16:11:04 2018 : Debug: attribute --> SQL-User-Name Thu Dec 20 16:11:04 2018 : Debug: literal --> 'AND a='0' ORDER BY id Thu Dec 20 16:11:04 2018 : Debug: (1) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}'AND a='0' ORDER BY id Thu Dec 20 16:11:04 2018 : Debug: (1) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'test'AND a='0' ORDER BY id Thu Dec 20 16:11:04 2018 : Debug: (1) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'test'AND a='0' ORDER BY id Thu Dec 20 16:11:04 2018 : Debug: (1) sql: User found in radcheck table Thu Dec 20 16:11:04 2018 : Debug: (1) sql: Conditional check items matched, merging assignment check items Thu Dec 20 16:11:04 2018 : Debug: (1) sql: Cleartext-Password := "test" Thu Dec 20 16:11:04 2018 : Debug: (1) sql: Expiration := "Jan 20 2019 13:26:26 EET" Thu Dec 20 16:11:04 2018 : Debug: (1) sql: Simultaneous-Use := 1 Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: FROM 3 TO 3 MAX 6 Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: Examining Cleartext-Password Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: APPENDING Cleartext-Password FROM 0 TO 3 Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: Examining Expiration Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: APPENDING Expiration FROM 1 TO 3 Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: Examining Simultaneous-Use Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: APPENDING Simultaneous-Use FROM 2 TO 3 Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: TO in 3 out 3 Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: to[0] = Idle-Timeout Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: to[1] = Mikrotik-Rate-Limit Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: to[2] = Idle-Timeout Thu Dec 20 16:11:04 2018 : Debug: SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}'AND a='0' ORDER BY id Thu Dec 20 16:11:04 2018 : Debug: Parsed xlat tree: Thu Dec 20 16:11:04 2018 : Debug: literal --> SELECT id, username, attribute, value, op FROM radreply WHERE username = ' Thu Dec 20 16:11:04 2018 : Debug: attribute --> SQL-User-Name Thu Dec 20 16:11:04 2018 : Debug: literal --> 'AND a='0' ORDER BY id Thu Dec 20 16:11:04 2018 : Debug: (1) sql: EXPAND SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}'AND a='0' ORDER BY id Thu Dec 20 16:11:04 2018 : Debug: (1) sql: --> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'test'AND a='0' ORDER BY id Thu Dec 20 16:11:04 2018 : Debug: (1) sql: Executing select query: SELECT id, username, attribute, value, op FROM radreply WHERE username = 'test'AND a='0' ORDER BY id Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ... falling-through to group processing Thu Dec 20 16:11:04 2018 : Debug: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority Thu Dec 20 16:11:04 2018 : Debug: Parsed xlat tree: Thu Dec 20 16:11:04 2018 : Debug: literal --> SELECT groupname FROM radusergroup WHERE username = ' Thu Dec 20 16:11:04 2018 : Debug: attribute --> SQL-User-Name Thu Dec 20 16:11:04 2018 : Debug: literal --> ' ORDER BY priority Thu Dec 20 16:11:04 2018 : Debug: (1) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority Thu Dec 20 16:11:04 2018 : Debug: (1) sql: --> SELECT groupname FROM radusergroup WHERE username = 'test' ORDER BY priority Thu Dec 20 16:11:04 2018 : Debug: (1) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = 'test' ORDER BY priority Thu Dec 20 16:11:04 2018 : Debug: (1) sql: User found in the group table Thu Dec 20 16:11:04 2018 : Debug: SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id Thu Dec 20 16:11:04 2018 : Debug: Parsed xlat tree: Thu Dec 20 16:11:04 2018 : Debug: literal --> SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = ' Thu Dec 20 16:11:04 2018 : Debug: attribute --> SQL-Group Thu Dec 20 16:11:04 2018 : Debug: literal --> ' ORDER BY id Thu Dec 20 16:11:04 2018 : Debug: (1) sql: EXPAND SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id Thu Dec 20 16:11:04 2018 : Debug: (1) sql: --> SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '=3F=3F=3F=3F=3F=3F=3F=3F=3F=3F 60=3F=3F=3F=3F=3F=3F=3F=3F=3F=3F=3F' ORDER BY id Thu Dec 20 16:11:04 2018 : Debug: (1) sql: Executing select query: SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '=3F=3F=3F=3F=3F=3F=3F=3F=3F=3F 60=3F=3F=3F=3F=3F=3F=3F=3F=3F=3F=3F' ORDER BY id Thu Dec 20 16:11:04 2018 : Debug: (1) sql: Group "?????????? 60???????????": Conditional check items matched Thu Dec 20 16:11:04 2018 : Debug: (1) sql: Group "?????????? 60???????????": Merging assignment check items Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: FROM 0 TO 6 MAX 6 Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: TO in 6 out 6 Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: to[0] = Idle-Timeout Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: to[1] = Mikrotik-Rate-Limit Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: to[2] = Idle-Timeout Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: to[3] = Cleartext-Password Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: to[4] = Expiration Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: to[5] = Simultaneous-Use Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ... falling-through to profile processing Thu Dec 20 16:11:04 2018 : Debug: rlm_sql (sql): Released connection (5) Thu Dec 20 16:11:04 2018 : Info: rlm_sql (sql): Need 4 more connections to reach 3 spares Thu Dec 20 16:11:04 2018 : Info: rlm_sql (sql): Opening additional connection (6), 1 of 9 pending slots used Thu Dec 20 16:11:04 2018 : Debug: rlm_sql_mysql: Starting connect to MySQL server Thu Dec 20 16:11:04 2018 : Debug: rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.6.33-0ubuntu0.14.04.1, protocol version 10 Thu Dec 20 16:11:04 2018 : Debug: (1) modsingle[authorize]: returned from sql (rlm_sql) for request 1 Thu Dec 20 16:11:04 2018 : Debug: (1) [sql] = ok Thu Dec 20 16:11:04 2018 : Debug: (1) modsingle[authorize]: calling expiration (rlm_expiration) for request 1 Thu Dec 20 16:11:04 2018 : Debug: (1) expiration: Account will expire at 'Jan 20 2019 13:26:26 EET' Thu Dec 20 16:11:04 2018 : Debug: (1) modsingle[authorize]: returned from expiration (rlm_expiration) for request 1 Thu Dec 20 16:11:04 2018 : Debug: (1) [expiration] = ok Thu Dec 20 16:11:04 2018 : Debug: (1) if (userlock && !"%{control:Tmp-String-1}") { Thu Dec 20 16:11:04 2018 : Debug: (1) if (userlock && !"%{control:Tmp-String-1}") -> FALSE Thu Dec 20 16:11:04 2018 : Debug: (1) modsingle[authorize]: calling pap (rlm_pap) for request 1 Thu Dec 20 16:11:04 2018 : Debug: (1) modsingle[authorize]: returned from pap (rlm_pap) for request 1 Thu Dec 20 16:11:04 2018 : Debug: (1) [pap] = updated Thu Dec 20 16:11:04 2018 : Debug: (1) } # authorize = updated Thu Dec 20 16:11:04 2018 : Debug: (1) Found Auth-Type = PAP Thu Dec 20 16:11:04 2018 : Debug: (1) # Executing group from file /etc/freeradius/sites-enabled/default Thu Dec 20 16:11:04 2018 : Debug: (1) Auth-Type PAP { Thu Dec 20 16:11:04 2018 : Debug: (1) modsingle[authenticate]: calling pap (rlm_pap) for request 1 Thu Dec 20 16:11:04 2018 : Debug: (1) pap: Login attempt with password "test" (4) Thu Dec 20 16:11:04 2018 : Debug: (1) pap: Comparing with "known good" Cleartext-Password "test" (4) Thu Dec 20 16:11:04 2018 : Debug: (1) pap: User authenticated successfully Thu Dec 20 16:11:04 2018 : Debug: (1) modsingle[authenticate]: returned from pap (rlm_pap) for request 1 Thu Dec 20 16:11:04 2018 : Debug: (1) [pap] = ok Thu Dec 20 16:11:04 2018 : Debug: (1) } # Auth-Type PAP = ok Thu Dec 20 16:11:04 2018 : Debug: (1) # Executing section session from file /etc/freeradius/sites-enabled/default Thu Dec 20 16:11:04 2018 : Debug: (1) session { Thu Dec 20 16:11:04 2018 : Debug: (1) modsingle[session]: calling sql (rlm_sql) for request 1 Thu Dec 20 16:11:04 2018 : Debug: %{User-Name} Thu Dec 20 16:11:04 2018 : Debug: Parsed xlat tree: Thu Dec 20 16:11:04 2018 : Debug: attribute --> User-Name Thu Dec 20 16:11:04 2018 : Debug: (1) sql: EXPAND %{User-Name} Thu Dec 20 16:11:04 2018 : Debug: (1) sql: --> test Thu Dec 20 16:11:04 2018 : Debug: (1) sql: SQL-User-Name set to 'test' Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: FROM 1 TO 13 MAX 14 Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: Examining SQL-User-Name Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: APPENDING SQL-User-Name FROM 0 TO 13 Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: TO in 13 out 13 Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: to[0] = NAS-IP-Address Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: to[1] = Framed-Protocol Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: to[2] = Service-Type Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: to[3] = Framed-IP-Address Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: to[4] = Calling-Station-Id Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: to[5] = NAS-Identifier Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: to[6] = Acct-Session-Id Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: to[7] = NAS-Port-Type Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: to[8] = Acct-Status-Type Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: to[9] = Acct-Delay-Time Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: to[10] = Port-Limit Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: to[11] = User-Name Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: to[12] = User-Password Thu Dec 20 16:11:04 2018 : Debug: SELECT COUNT(*) FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL Thu Dec 20 16:11:04 2018 : Debug: Parsed xlat tree: Thu Dec 20 16:11:04 2018 : Debug: literal --> SELECT COUNT(*) FROM radacct WHERE username = ' Thu Dec 20 16:11:04 2018 : Debug: attribute --> SQL-User-Name Thu Dec 20 16:11:04 2018 : Debug: literal --> ' AND acctstoptime IS NULL Thu Dec 20 16:11:04 2018 : Debug: (1) sql: EXPAND SELECT COUNT(*) FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL Thu Dec 20 16:11:04 2018 : Debug: (1) sql: --> SELECT COUNT(*) FROM radacct WHERE username = 'test' AND acctstoptime IS NULL Thu Dec 20 16:11:04 2018 : Debug: rlm_sql (sql): Reserved connection (5) Thu Dec 20 16:11:04 2018 : Debug: (1) sql: Executing select query: SELECT COUNT(*) FROM radacct WHERE username = 'test' AND acctstoptime IS NULL Thu Dec 20 16:11:04 2018 : Debug: rlm_sql (sql): Released connection (5) Thu Dec 20 16:11:04 2018 : Debug: (1) modsingle[session]: returned from sql (rlm_sql) for request 1 Thu Dec 20 16:11:04 2018 : Debug: (1) [sql] = ok Thu Dec 20 16:11:04 2018 : Debug: (1) } # session = ok Thu Dec 20 16:11:04 2018 : Debug: (1) # Executing section post-auth from file /etc/freeradius/sites-enabled/default Thu Dec 20 16:11:04 2018 : Debug: (1) post-auth { Thu Dec 20 16:11:04 2018 : Debug: (1) modsingle[post-auth]: calling sql (rlm_sql) for request 1 Thu Dec 20 16:11:04 2018 : Debug: .query Thu Dec 20 16:11:04 2018 : Debug: Parsed xlat tree: Thu Dec 20 16:11:04 2018 : Debug: literal --> .query Thu Dec 20 16:11:04 2018 : Debug: (1) sql: EXPAND .query Thu Dec 20 16:11:04 2018 : Debug: (1) sql: --> .query Thu Dec 20 16:11:04 2018 : Debug: (1) sql: Using query template 'query' Thu Dec 20 16:11:04 2018 : Debug: rlm_sql (sql): Reserved connection (6) Thu Dec 20 16:11:04 2018 : Debug: %{User-Name} Thu Dec 20 16:11:04 2018 : Debug: Parsed xlat tree: Thu Dec 20 16:11:04 2018 : Debug: attribute --> User-Name Thu Dec 20 16:11:04 2018 : Debug: (1) sql: EXPAND %{User-Name} Thu Dec 20 16:11:04 2018 : Debug: (1) sql: --> test Thu Dec 20 16:11:04 2018 : Debug: (1) sql: SQL-User-Name set to 'test' Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: FROM 1 TO 13 MAX 14 Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: Examining SQL-User-Name Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: APPENDING SQL-User-Name FROM 0 TO 13 Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: TO in 13 out 13 Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: to[0] = NAS-IP-Address Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: to[1] = Framed-Protocol Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: to[2] = Service-Type Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: to[3] = Framed-IP-Address Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: to[4] = Calling-Station-Id Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: to[5] = NAS-Identifier Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: to[6] = Acct-Session-Id Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: to[7] = NAS-Port-Type Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: to[8] = Acct-Status-Type Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: to[9] = Acct-Delay-Time Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: to[10] = Port-Limit Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: to[11] = User-Name Thu Dec 20 16:11:04 2018 : Debug: (1) sql: ::: to[12] = User-Password Thu Dec 20 16:11:04 2018 : Debug: INSERT INTO radpostauth (username, pass, reply, authdate, nasipaddress, macaddress,framedipaddress) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', CURRENT_TIMESTAMP(),'%{NAS-IP-Address}', '%{Calling-Station-ID}', '%{Framed-IP-Address}' ) Thu Dec 20 16:11:04 2018 : Debug: Parsed xlat tree: Thu Dec 20 16:11:04 2018 : Debug: literal --> INSERT INTO radpostauth (username, pass, reply, authdate, nasipaddress, macaddress,framedipaddress) VALUES ( ' Thu Dec 20 16:11:04 2018 : Debug: attribute --> SQL-User-Name Thu Dec 20 16:11:04 2018 : Debug: literal --> ', ' Thu Dec 20 16:11:04 2018 : Debug: if { Thu Dec 20 16:11:04 2018 : Debug: attribute --> User-Password Thu Dec 20 16:11:04 2018 : Debug: } Thu Dec 20 16:11:04 2018 : Debug: else { Thu Dec 20 16:11:04 2018 : Debug: attribute --> CHAP-Password Thu Dec 20 16:11:04 2018 : Debug: } Thu Dec 20 16:11:04 2018 : Debug: literal --> ', ' Thu Dec 20 16:11:04 2018 : Debug: attribute --> Packet-Type Thu Dec 20 16:11:04 2018 : Debug: literal --> ', CURRENT_TIMESTAMP(),' Thu Dec 20 16:11:04 2018 : Debug: attribute --> NAS-IP-Address Thu Dec 20 16:11:04 2018 : Debug: literal --> ', ' Thu Dec 20 16:11:04 2018 : Debug: attribute --> Calling-Station-Id Thu Dec 20 16:11:04 2018 : Debug: literal --> ', ' Thu Dec 20 16:11:04 2018 : Debug: attribute --> Framed-IP-Address Thu Dec 20 16:11:04 2018 : Debug: literal --> ' ) Thu Dec 20 16:11:04 2018 : Debug: (1) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate, nasipaddress, macaddress,framedipaddress) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', CURRENT_TIMESTAMP(),'%{NAS-IP-Address}', '%{Calling-Station-ID}', '%{Framed-IP-Address}' ) Thu Dec 20 16:11:04 2018 : Debug: (1) sql: --> INSERT INTO radpostauth (username, pass, reply, authdate, nasipaddress, macaddress,framedipaddress) VALUES ( 'test', 'test', 'Access-Accept', CURRENT_TIMESTAMP(),'10.40.47.1', '10.40.47.200', '10.40.47.200' ) Thu Dec 20 16:11:04 2018 : Debug: (1) sql: Executing query: INSERT INTO radpostauth (username, pass, reply, authdate, nasipaddress, macaddress,framedipaddress) VALUES ( 'test', 'test', 'Access-Accept', CURRENT_TIMESTAMP(),'10.40.47.1', '10.40.47.200', '10.40.47.200' ) Thu Dec 20 16:11:04 2018 : Debug: (1) sql: SQL query returned: success Thu Dec 20 16:11:04 2018 : Debug: (1) sql: 1 record(s) updated Thu Dec 20 16:11:04 2018 : Debug: rlm_sql (sql): Released connection (6) Thu Dec 20 16:11:04 2018 : Debug: (1) modsingle[post-auth]: returned from sql (rlm_sql) for request 1 Thu Dec 20 16:11:04 2018 : Debug: (1) [sql] = ok Thu Dec 20 16:11:04 2018 : Debug: (1) } # post-auth = ok Thu Dec 20 16:11:04 2018 : Debug: (1) Sent Access-Accept Id 1 from 127.0.0.1:1812 to 127.0.0.1:43292 length 0 Thu Dec 20 16:11:04 2018 : Debug: (1) Mikrotik-Rate-Limit := "5120k/0 0/0 0/0 0/0 8" Thu Dec 20 16:11:04 2018 : Debug: (1) Session-Timeout = 2668522 Thu Dec 20 16:11:04 2018 : Debug: (1) Finished request Thu Dec 20 16:11:04 2018 : Debug: Waking up in 4.9 seconds. Thu Dec 20 16:11:09 2018 : Debug: (1) Cleaning up request packet ID 1 with timestamp +950 Thu Dec 20 16:11:09 2018 : Info: Ready to process requests ssssssssssss^C root@Advradius:~# freeradius -X Server was built with: accounting : yes authentication : yes ascend-binary-attributes : yes coa : yes control-socket : yes detail : yes dhcp : yes dynamic-clients : yes osfc2 : no proxy : yes regex-pcre : no regex-posix : yes regex-posix-extended : yes session-management : yes stats : yes tcp : yes threads : yes tls : yes unlang : yes vmps : yes developer : no Server core libs: freeradius-server : 3.0.11 talloc : 2.0.* ssl : 1.0.1f release Endianness: little Compilation flags: cppflags : -D_FORTIFY_SOURCE=2 cflags : -I/home/adv/freeradius-server -I/home/adv/freeradius-server/src -include /home/adv/freeradius-server/src/freeradius-devel/autoconf.h -include /home/adv/freeradius-server/src/freeradius-devel/build.h -include /home/adv/freeradius-server/src/freeradius-devel/features.h -include /home/adv/freeradius-server/src/freeradius-devel/radpaths.h -fno-strict-aliasing -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -O2 -Wall -std=c99 -D_GNU_SOURCE -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 -DNDEBUG -DIS_MODULE=1 ldflags : -Wl,-Bsymbolic-functions -Wl,-z,relro libs : -lcrypto -lssl -ltalloc -lcap -lnsl -lresolv -ldl -lpthread -lreadline Copyright (C) 1999-2016 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/dictionary including configuration file /etc/freeradius/radiusd.conf including configuration file /etc/freeradius/proxy.conf including files in directory /etc/freeradius/mods-enabled/ including configuration file /etc/freeradius/mods-enabled/exec including configuration file /etc/freeradius/mods-enabled/attr_filter including configuration file /etc/freeradius/mods-enabled/sql including configuration file /etc/freeradius/mods-config/sql/main/mysql/queries.conf including configuration file /etc/freeradius/mods-enabled/preprocess including configuration file /etc/freeradius/mods-enabled/expiration including configuration file /etc/freeradius/mods-enabled/chap including configuration file /etc/freeradius/mods-enabled/logintime including configuration file /etc/freeradius/mods-enabled/realm including configuration file /etc/freeradius/mods-enabled/unix including configuration file /etc/freeradius/mods-enabled/passwd including configuration file /etc/freeradius/mods-enabled/digest including configuration file /etc/freeradius/mods-enabled/ntlm_auth including configuration file /etc/freeradius/mods-enabled/replicate including configuration file /etc/freeradius/mods-enabled/detail.log including configuration file /etc/freeradius/mods-enabled/mschap including configuration file /etc/freeradius/mods-enabled/detail including configuration file /etc/freeradius/mods-enabled/echo including configuration file /etc/freeradius/mods-enabled/unpack including configuration file /etc/freeradius/mods-enabled/always including configuration file /etc/freeradius/mods-enabled/cache_eap including configuration file /etc/freeradius/mods-enabled/radutmp including configuration file /etc/freeradius/mods-enabled/files including configuration file /etc/freeradius/mods-enabled/expr including configuration file /etc/freeradius/mods-enabled/sradutmp including configuration file /etc/freeradius/mods-enabled/pap including configuration file /etc/freeradius/mods-enabled/soh including configuration file /etc/freeradius/mods-enabled/dynamic_clients including configuration file /etc/freeradius/mods-enabled/linelog including configuration file /etc/freeradius/mods-enabled/eap including configuration file /etc/freeradius/mods-enabled/utf8 including files in directory /etc/freeradius/policy.d/ including configuration file /etc/freeradius/policy.d/filter including configuration file /etc/freeradius/policy.d/operator-name including configuration file /etc/freeradius/policy.d/abfab-tr including configuration file /etc/freeradius/policy.d/accounting including configuration file /etc/freeradius/policy.d/cui including configuration file /etc/freeradius/policy.d/control including configuration file /etc/freeradius/policy.d/canonicalization including configuration file /etc/freeradius/policy.d/dhcp including configuration file /etc/freeradius/policy.d/eap including configuration file /etc/freeradius/policy.d/debug including files in directory /etc/freeradius/sites-enabled/ including configuration file /etc/freeradius/sites-enabled/default including configuration file /etc/freeradius/sites-enabled/inner-tunnel main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 102400000 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### Debugger not attached # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Auth-Type = eap radiusd: #### Instantiating modules #### modules { # Loaded module rlm_exec # Loading module "exec" from file /etc/freeradius/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_sql # Loading module "sql" from file /etc/freeradius/mods-enabled/sql sql { driver = "rlm_sql_mysql" server = "localhost" port = 0 login = "root" password = <<< secret >>> radius_db = "radius" read_groups = yes read_profiles = yes read_clients = yes delete_stale_sessions = yes sql_user_name = "%{User-Name}" default_user_profile = "" client_query = "SELECT id, nasname, shortname, type, secret, server FROM nas" authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}'AND a='0' ORDER BY id" authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}'AND a='0' ORDER BY id" authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id" group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority" simul_count_query = "SELECT COUNT(*) FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" accounting { reference = "%{tolower:type.%{Acct-Status-Type}.query}" type { accounting-on { query = "UPDATE radacct SET acctstoptime = CURRENT_TIMESTAMP(), acctsessiontime = unix_timestamp(CURRENT_TIMESTAMP()) - unix_timestamp(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}', acctstopdelay = %{%{Acct-Delay-Time}:-0}, dup = '%{Acct-Session-Id}', t_session = unix_timestamp(), nas_name = '%{NAS-Identifier}', t_update = '%{Acct-Interim-Interval}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= '%S'" } accounting-off { query = "UPDATE radacct SET acctstoptime = CURRENT_TIMESTAMP(), acctsessiontime = unix_timestamp(CURRENT_TIMESTAMP()) - unix_timestamp(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}', acctstopdelay = %{%{Acct-Delay-Time}:-0}, dup = '%{Acct-Session-Id}', t_session = unix_timestamp(), nas_name = '%{NAS-Identifier}', t_update = '%{Acct-Interim-Interval}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= '%S'" } start { query = "INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype,acctstarttime, acctupdatetime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, dup, t_session, nas_name,groupname,down_uq,up_uq,down_cq,up_cq,up_dq,dwon_dq,time_dq,all_tu,all_tc,id_card,t_update) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}', '%S', CURRENT_TIMESTAMP(), NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{Acct-Session-Id}', unix_timestamp(), '%{NAS-Identifier}', COALESCE((SELECT groupname FROM `radusergroup` WHERE username = '%{SQL-User-Name}'),'0'), COALESCE((SELECT SUM(r1.acctoutputoctets) FROM radacct as `r1` INNER JOIN userinfo ON (userinfo.username=r1.username) WHERE r1.username = '%{SQL-User-Name}' AND UNIX_TIMESTAMP(STR_TO_DATE(r1.acctstarttime, '%%Y-%%m-%%d %%H:%%i:%%s')) >= userinfo.updatedate),'0'), COALESCE((SELECT SUM(r3.acctinputoctets) FROM radacct as `r3` INNER JOIN userinfo ON (userinfo.username=r3.username) WHERE r3.username = '%{SQL-User-Name}' AND UNIX_TIMESTAMP(STR_TO_DATE(r3.acctstarttime, '%%Y-%%m-%%d %%H:%%i:%%s')) >= userinfo.updatedate),'0'), COALESCE((SELECT SUM(r2.acctoutputoctets) FROM radacct as `r2` INNER JOIN radcheck ON (radcheck.username=r2.username AND radcheck.is_card ='1' ) WHERE r2.username = '%{SQL-User-Name}'),'0'), COALESCE((SELECT SUM(r4.acctinputoctets) FROM radacct as `r4` INNER JOIN radcheck ON (radcheck.username=r4.username AND radcheck.is_card ='1' ) WHERE r4.username = '%{SQL-User-Name}'),'0'), COALESCE((SELECT SUM(`r5`.`acctinputoctets`) FROM `radacct` as `r5` WHERE DATE_FORMAT(STR_TO_DATE(`r5`.`acctstarttime`,'%%Y-%%m-%%d %%H:%%i:%%s'),'%%Y-%%m-%%d') = DATE_FORMAT(NOW(),'%%Y-%%m-%%d') AND r5.username = '%{SQL-User-Name}'),'0'), COALESCE((SELECT SUM(`r6`.`acctoutputoctets`) FROM `radacct` as `r6` WHERE DATE_FORMAT(STR_TO_DATE(`r6`.`acctstarttime`,'%%Y-%%m-%%d %%H:%%i:%%s'),'%%Y-%%m-%%d') = DATE_FORMAT(NOW(),'%%Y-%%m-%%d') AND r6.username = '%{SQL-User-Name}'),'0'), COALESCE((SELECT SUM(`r7`.`acctsessiontime`) FROM `radacct` as `r7` WHERE DATE_FORMAT(STR_TO_DATE(`r7`.`acctstarttime`,'%%Y-%%m-%%d %%H:%%i:%%s'),'%%Y-%%m-%%d') = DATE_FORMAT(NOW(),'%%Y-%%m-%%d') AND r7.username = '%{SQL-User-Name}'),'0'), COALESCE((SELECT SUM(`r8`.`acctsessiontime`) FROM `radacct` `r8` INNER JOIN `userinfo` ON (`r8`.`username` = `userinfo`.`username`) WHERE UNIX_TIMESTAMP(STR_TO_DATE(`r8`.`acctstarttime`, '%%Y-%%m-%%d %%H:%%i:%%s')) >=`userinfo`.`updatedate` AND r8.username = '%{SQL-User-Name}' ),'0'), COALESCE((SELECT SUM(`r9`.`acctsessiontime`) FROM `radacct` `r9` INNER JOIN `radcheck` ON(`radcheck`.`username` = `r9`.`username` AND `radcheck`.`is_card` ='1') WHERE r9.username = '%{SQL-User-Name}' ),'0'), COALESCE((SELECT `radcheck`.`id_card` FROM `radacct` `r10` INNER JOIN `radcheck` ON(`radcheck`.`username` = `r10`.`username` AND `radcheck`.`is_card` ='1') WHERE radcheck.username = '%{SQL-User-Name}' AND `radcheck`.`attribute`='Cleartext-Password' LIMIT 1 ),'0'), '%{Acct-Interim-Interval}' )" } interim-update { query = "UPDATE radacct SET acctupdatetime = (@acctupdatetime_old:=acctupdatetime), acctupdatetime = CURRENT_TIMESTAMP(), acctinterval= CURRENT_TIMESTAMP() - UNIX_TIMESTAMP(@acctupdatetime_old), framedipaddress = '%{Framed-IP-Address}', acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', dup= '%{Acct-Session-Id}', t_session = unix_timestamp(), nas_name = '%{NAS-Identifier}', t_update = '%{Acct-Interim-Interval}' WHERE acctsessionid = '%{Acct-Session-Id}'AND username = '%{SQL-User-Name}'" } stop { query = "UPDATE radacct SET acctstoptime = CURRENT_TIMESTAMP(), acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}', dup = '%{Acct-Session-Id}', t_session = unix_timestamp(), nas_name = '%{NAS-Identifier}', t_update = '%{Acct-Interim-Interval}' WHERE acctsessionid = '%{Acct-Session-Id}'AND username = '%{SQL-User-Name}'" } } } post-auth { reference = ".query" query = "INSERT INTO radpostauth (username, pass, reply, authdate, nasipaddress, macaddress,framedipaddress) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', CURRENT_TIMESTAMP(),'%{NAS-IP-Address}', '%{Calling-Station-ID}', '%{Framed-IP-Address}' )" } } rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked Creating attribute SQL-Group # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/mods-enabled/expiration # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/mods-enabled/chap # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/mods-enabled/digest # Loading module "ntlm_auth" from file /etc/freeradius/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/mods-enabled/replicate # Loaded module rlm_detail # Loading module "auth_log" from file /etc/freeradius/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes } # Loading module "detail" from file /etc/freeradius/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "echo" from file /etc/freeradius/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/mods-enabled/unpack # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/freeradius/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/mods-enabled/files files { filename = "/etc/freeradius/mods-config/files/authorize" acctusersfile = "/etc/freeradius/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/mods-config/files/pre-proxy" } # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loading module "sradutmp" from file /etc/freeradius/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/mods-enabled/dynamic_clients # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 102400000 } # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/mods-enabled/utf8 instantiate { } # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/access_reject [/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/accounting_response # Instantiating module "sql" from file /etc/freeradius/mods-enabled/sql rlm_sql_mysql: libmysql version: 5.5.62 mysql { tls { } warnings = "auto" } rlm_sql (sql): Attempting to connect to database "radius" rlm_sql (sql): Initialising connection pool pool { start = 5 min = 5 max = 10 spare = 3 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_sql (sql): Opening additional connection (0), 1 of 10 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.6.33-0ubuntu0.14.04.1, protocol version 10 rlm_sql (sql): Opening additional connection (1), 1 of 9 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.6.33-0ubuntu0.14.04.1, protocol version 10 rlm_sql (sql): Opening additional connection (2), 1 of 8 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.6.33-0ubuntu0.14.04.1, protocol version 10 rlm_sql (sql): Opening additional connection (3), 1 of 7 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.6.33-0ubuntu0.14.04.1, protocol version 10 rlm_sql (sql): Opening additional connection (4), 1 of 6 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.6.33-0ubuntu0.14.04.1, protocol version 10 rlm_sql (sql): Processing generate_sql_clients rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname, shortname, type, secret, server FROM nas rlm_sql (sql): Reserved connection (0) rlm_sql (sql): Executing select query: SELECT id, nasname, shortname, type, secret, server FROM nas rlm_sql (sql): Adding client 10.10.32.2 (????? 5) to global clients list rlm_sql (10.10.32.2): Client "????? 5" (sql) added rlm_sql (sql): Adding client 10.10.35.176 (??????? 2) to global clients list rlm_sql (10.10.35.176): Client "??????? 2" (sql) added rlm_sql (sql): Adding client 10.10.35.178 (????????) to global clients list rlm_sql (10.10.35.178): Client "????????" (sql) added rlm_sql (sql): Adding client 10.10.33.7 (????? ???????) to global clients list rlm_sql (10.10.33.7): Client "????? ???????" (sql) added rlm_sql (sql): Adding client 10.10.35.185 (????? 1) to global clients list rlm_sql (10.10.35.185): Client "????? 1" (sql) added rlm_sql (sql): Adding client 10.100.11.18 (???????) to global clients list rlm_sql (10.100.11.18): Client "???????" (sql) added rlm_sql (sql): Adding client 10.100.12.2 (??? ??? 1) to global clients list rlm_sql (10.100.12.2): Client "??? ??? 1" (sql) added rlm_sql (sql): Adding client 10.100.12.6 (??? ??? 2) to global clients list rlm_sql (10.100.12.6): Client "??? ??? 2" (sql) added rlm_sql (sql): Adding client 10.100.12.10 (??? ??? 3) to global clients list rlm_sql (10.100.12.10): Client "??? ??? 3" (sql) added rlm_sql (sql): Adding client 10.10.32.25 (????? ??????) to global clients list rlm_sql (10.10.32.25): Client "????? ??????" (sql) added rlm_sql (sql): Adding client 10.10.41.2 (????? 1) to global clients list rlm_sql (10.10.41.2): Client "????? 1" (sql) added rlm_sql (sql): Adding client 10.100.13.187 (???? 2) to global clients list rlm_sql (10.100.13.187): Client "???? 2" (sql) added rlm_sql (sql): Adding client 10.100.13.188 (???? 3) to global clients list rlm_sql (10.100.13.188): Client "???? 3" (sql) added rlm_sql (sql): Adding client 10.10.32.163 (????? ???? 14) to global clients list rlm_sql (10.10.32.163): Client "????? ???? 14" (sql) added rlm_sql (sql): Adding client 10.10.37.4 (????? 2) to global clients list rlm_sql (10.10.37.4): Client "????? 2" (sql) added rlm_sql (sql): Adding client 10.10.33.6 (??????? ????????) to global clients list rlm_sql (10.10.33.6): Client "??????? ????????" (sql) added rlm_sql (sql): Adding client 10.10.35.3 (??????? 1) to global clients list rlm_sql (10.10.35.3): Client "??????? 1" (sql) added rlm_sql (sql): Adding client 10.10.35.4 (??????) to global clients list rlm_sql (10.10.35.4): Client "??????" (sql) added rlm_sql (sql): Adding client 10.10.33.2 (????? 1) to global clients list rlm_sql (10.10.33.2): Client "????? 1" (sql) added rlm_sql (sql): Adding client 10.10.33.3 (????? 2) to global clients list rlm_sql (10.10.33.3): Client "????? 2" (sql) added rlm_sql (sql): Adding client 10.10.37.3 (????? 1) to global clients list rlm_sql (10.10.37.3): Client "????? 1" (sql) added rlm_sql (sql): Adding client 10.10.32.5 (????? 1) to global clients list rlm_sql (10.10.32.5): Client "????? 1" (sql) added rlm_sql (sql): Adding client 10.10.32.6 (????? 2) to global clients list rlm_sql (10.10.32.6): Client "????? 2" (sql) added rlm_sql (sql): Adding client 10.10.32.7 (????? 3) to global clients list rlm_sql (10.10.32.7): Client "????? 3" (sql) added rlm_sql (sql): Adding client 10.10.32.8 (????? 4) to global clients list rlm_sql (10.10.32.8): Client "????? 4" (sql) added rlm_sql (sql): Adding client 10.10.35.186 (????? 2) to global clients list rlm_sql (10.10.35.186): Client "????? 2" (sql) added rlm_sql (sql): Adding client 10.10.41.3 (????? 2) to global clients list rlm_sql (10.10.41.3): Client "????? 2" (sql) added rlm_sql (sql): Adding client 10.10.32.9 (???????? 1) to global clients list rlm_sql (10.10.32.9): Client "???????? 1" (sql) added rlm_sql (sql): Adding client 10.10.32.10 (???????? 2) to global clients list rlm_sql (10.10.32.10): Client "???????? 2" (sql) added rlm_sql (sql): Adding client 10.10.32.11 (????????) to global clients list rlm_sql (10.10.32.11): Client "????????" (sql) added rlm_sql (sql): Adding client 10.10.34.2 (?????? 1) to global clients list rlm_sql (10.10.34.2): Client "?????? 1" (sql) added rlm_sql (sql): Adding client 10.10.34.5 (????? ?????? 1) to global clients list rlm_sql (10.10.34.5): Client "????? ?????? 1" (sql) added rlm_sql (sql): Adding client 10.10.37.12 (??????? 1) to global clients list rlm_sql (10.10.37.12): Client "??????? 1" (sql) added rlm_sql (sql): Adding client 10.10.37.13 (??????? 2) to global clients list rlm_sql (10.10.37.13): Client "??????? 2" (sql) added rlm_sql (sql): Adding client 10.10.34.6 (?????? 4) to global clients list rlm_sql (10.10.34.6): Client "?????? 4" (sql) added rlm_sql (sql): Adding client 10.10.34.7 (?????? 5) to global clients list rlm_sql (10.10.34.7): Client "?????? 5" (sql) added rlm_sql (sql): Adding client 10.10.37.14 (???????? 1) to global clients list rlm_sql (10.10.37.14): Client "???????? 1" (sql) added rlm_sql (sql): Adding client 10.10.37.15 (???????? 2) to global clients list rlm_sql (10.10.37.15): Client "???????? 2" (sql) added rlm_sql (sql): Adding client 10.10.32.16 (??? ???????? 1) to global clients list rlm_sql (10.10.32.16): Client "??? ???????? 1" (sql) added rlm_sql (sql): Adding client 10.10.32.17 (??? ???????? 2) to global clients list rlm_sql (10.10.32.17): Client "??? ???????? 2" (sql) added rlm_sql (sql): Adding client 10.100.13.186 (???? 1) to global clients list rlm_sql (10.100.13.186): Client "???? 1" (sql) added rlm_sql (sql): Adding client 10.10.32.18 (????? 6) to global clients list rlm_sql (10.10.32.18): Client "????? 6" (sql) added rlm_sql (sql): Adding client 10.10.32.19 (????? 7) to global clients list rlm_sql (10.10.32.19): Client "????? 7" (sql) added rlm_sql (sql): Adding client 10.254.1.2 (????? ??????? 1) to global clients list rlm_sql (10.254.1.2): Client "????? ??????? 1" (sql) added rlm_sql (sql): Adding client 10.254.1.3 (????? ??????? 2) to global clients list rlm_sql (10.254.1.3): Client "????? ??????? 2" (sql) added rlm_sql (sql): Adding client 10.254.1.4 (????? ??????? 3) to global clients list rlm_sql (10.254.1.4): Client "????? ??????? 3" (sql) added rlm_sql (sql): Adding client 10.254.1.5 (????? ??????? 4) to global clients list rlm_sql (10.254.1.5): Client "????? ??????? 4" (sql) added rlm_sql (sql): Adding client 10.254.2.2 (????? ?????? 1) to global clients list rlm_sql (10.254.2.2): Client "????? ?????? 1" (sql) added rlm_sql (sql): Adding client 10.254.2.5 (????? ?????? 2) to global clients list rlm_sql (10.254.2.5): Client "????? ?????? 2" (sql) added rlm_sql (sql): Adding client 10.10.39.2 (??????????? 1) to global clients list rlm_sql (10.10.39.2): Client "??????????? 1" (sql) added rlm_sql (sql): Adding client 10.10.39.3 (??????????? 2) to global clients list rlm_sql (10.10.39.3): Client "??????????? 2" (sql) added rlm_sql (sql): Adding client 10.10.39.4 (??????????? 3) to global clients list rlm_sql (10.10.39.4): Client "??????????? 3" (sql) added rlm_sql (sql): Adding client 10.10.39.5 (??????????? 4) to global clients list rlm_sql (10.10.39.5): Client "??????????? 4" (sql) added rlm_sql (sql): Adding client 10.10.39.6 (??????????? 5) to global clients list rlm_sql (10.10.39.6): Client "??????????? 5" (sql) added rlm_sql (sql): Adding client 10.10.39.7 (??????????? 6) to global clients list rlm_sql (10.10.39.7): Client "??????????? 6" (sql) added rlm_sql (sql): Adding client 10.10.39.8 (??????????? 7) to global clients list rlm_sql (10.10.39.8): Client "??????????? 7" (sql) added rlm_sql (sql): Adding client 10.10.34.8 (????? ?????? 2) to global clients list rlm_sql (10.10.34.8): Client "????? ?????? 2" (sql) added rlm_sql (sql): Adding client 10.10.32.20 (???????? 3) to global clients list rlm_sql (10.10.32.20): Client "???????? 3" (sql) added rlm_sql (sql): Adding client 10.10.32.21 (???????? 4) to global clients list rlm_sql (10.10.32.21): Client "???????? 4" (sql) added rlm_sql (sql): Adding client 10.10.40.2 (??????? 1) to global clients list rlm_sql (10.10.40.2): Client "??????? 1" (sql) added rlm_sql (sql): Adding client 10.10.40.3 (??????? 2) to global clients list rlm_sql (10.10.40.3): Client "??????? 2" (sql) added rlm_sql (sql): Adding client 10.10.32.100 (Carreour Hotspot) to global clients list rlm_sql (10.10.32.100): Client "Carreour Hotspot" (sql) added rlm_sql (sql): Adding client 10.10.32.101 (ALCKEKLEY) to global clients list rlm_sql (10.10.32.101): Client "ALCKEKLEY" (sql) added rlm_sql (sql): Adding client 10.10.32.103 (ALMOSTAKBAL) to global clients list rlm_sql (10.10.32.103): Client "ALMOSTAKBAL" (sql) added rlm_sql (sql): Adding client 10.10.32.105 (TRFAC COFFEE) to global clients list rlm_sql (10.10.32.105): Client "TRFAC COFFEE" (sql) added rlm_sql (sql): Adding client 10.10.32.119 (MOHAY COFFEE) to global clients list rlm_sql (10.10.32.119): Client "MOHAY COFFEE" (sql) added rlm_sql (sql): Adding client 10.10.32.133 (KRECH) to global clients list rlm_sql (10.10.32.133): Client "KRECH" (sql) added rlm_sql (sql): Adding client 10.10.32.134 (BSEAM) to global clients list rlm_sql (10.10.32.134): Client "BSEAM" (sql) added rlm_sql (sql): Adding client 10.10.32.138 (WAKEL BERMOAMER) to global clients list rlm_sql (10.10.32.138): Client "WAKEL BERMOAMER" (sql) added rlm_sql (sql): Adding client 10.10.32.143 (KZEMA) to global clients list rlm_sql (10.10.32.143): Client "KZEMA" (sql) added rlm_sql (sql): Adding client 10.10.32.150 (WAKEL SBRATA) to global clients list rlm_sql (10.10.32.150): Client "WAKEL SBRATA" (sql) added rlm_sql (sql): Adding client 10.10.33.5 (ALNZAH HOTEL) to global clients list rlm_sql (10.10.33.5): Client "ALNZAH HOTEL" (sql) added rlm_sql (sql): Adding client 10.10.33.7 (ESTAHAT ALMDKEAL) to global clients list Failed to add duplicate client ESTAHAT ALMDKEAL Failed to add client, possible duplicate? rlm_sql (sql): Adding client 10.10.33.102 (RACHED COFFEE) to global clients list rlm_sql (10.10.33.102): Client "RACHED COFFEE" (sql) added rlm_sql (sql): Adding client 10.10.33.108 (ALMDKEL COFFEE) to global clients list rlm_sql (10.10.33.108): Client "ALMDKEL COFFEE" (sql) added rlm_sql (sql): Adding client 10.10.33.109 (WAKEL ALMUDAN) to global clients list rlm_sql (10.10.33.109): Client "WAKEL ALMUDAN" (sql) added rlm_sql (sql): Adding client 10.10.33.112 (ALFORECA) to global clients list rlm_sql (10.10.33.112): Client "ALFORECA" (sql) added rlm_sql (sql): Adding client 10.10.33.116 (WALED COFFEE) to global clients list rlm_sql (10.10.33.116): Client "WALED COFFEE" (sql) added rlm_sql (sql): Adding client 10.10.33.118 (TANGO COFFEE) to global clients list rlm_sql (10.10.33.118): Client "TANGO COFFEE" (sql) added rlm_sql (sql): Adding client 10.10.33.120 (VILLAGGIO COFFEE) to global clients list rlm_sql (10.10.33.120): Client "VILLAGGIO COFFEE" (sql) added rlm_sql (sql): Adding client 10.10.33.122 (ALHARA) to global clients list rlm_sql (10.10.33.122): Client "ALHARA" (sql) added rlm_sql (sql): Adding client 10.10.33.124 (ALMHATA COFFEE) to global clients list rlm_sql (10.10.33.124): Client "ALMHATA COFFEE" (sql) added rlm_sql (sql): Adding client 10.10.33.125 (ALSH3AL COFFEE) to global clients list rlm_sql (10.10.33.125): Client "ALSH3AL COFFEE" (sql) added rlm_sql (sql): Adding client 10.10.33.130 (CASA COFFEE) to global clients list rlm_sql (10.10.33.130): Client "CASA COFFEE" (sql) added rlm_sql (sql): Adding client 10.10.33.131 (OSMAN COFFEE) to global clients list rlm_sql (10.10.33.131): Client "OSMAN COFFEE" (sql) added rlm_sql (sql): Adding client 10.10.33.135 (SEDAZENAB COFFEE) to global clients list rlm_sql (10.10.33.135): Client "SEDAZENAB COFFEE" (sql) added rlm_sql (sql): Adding client 10.10.33.137 (AL3MDA) to global clients list rlm_sql (10.10.33.137): Client "AL3MDA" (sql) added rlm_sql (sql): Adding client 10.10.33.139 (ALHANDSA ) to global clients list rlm_sql (10.10.33.139): Client "ALHANDSA " (sql) added rlm_sql (sql): Adding client 10.10.33.140 (RAMZ) to global clients list rlm_sql (10.10.33.140): Client "RAMZ" (sql) added rlm_sql (sql): Adding client 10.10.33.148 (ALJBE3A ALGDEMA) to global clients list rlm_sql (10.10.33.148): Client "ALJBE3A ALGDEMA" (sql) added rlm_sql (sql): Adding client 10.10.33.154 (ALHNESH COFFEE) to global clients list rlm_sql (10.10.33.154): Client "ALHNESH COFFEE" (sql) added rlm_sql (sql): Adding client 10.10.33.173 (TAXI Coffee) to global clients list rlm_sql (10.10.33.173): Client "TAXI Coffee" (sql) added rlm_sql (sql): Adding client 10.10.33.174 (COSTA COFFEE) to global clients list rlm_sql (10.10.33.174): Client "COSTA COFFEE" (sql) added rlm_sql (sql): Adding client 10.10.33.183 (ALEDMRAL COFFEE) to global clients list rlm_sql (10.10.33.183): Client "ALEDMRAL COFFEE" (sql) added rlm_sql (sql): Adding client 10.10.35.184 (UNO COFFEE) to global clients list rlm_sql (10.10.35.184): Client "UNO COFFEE" (sql) added rlm_sql (sql): Adding client 10.10.33.191 (ALJODA COFFEE) to global clients list rlm_sql (10.10.33.191): Client "ALJODA COFFEE" (sql) added rlm_sql (sql): Adding client 10.10.34.10 (NADE ALWATAN) to global clients list rlm_sql (10.10.34.10): Client "NADE ALWATAN" (sql) added rlm_sql (sql): Adding client 10.10.34.104 (ORCHID COFFEE) to global clients list rlm_sql (10.10.34.104): Client "ORCHID COFFEE" (sql) added rlm_sql (sql): Adding client 10.10.34.121 (WAKEL ALSABREA) to global clients list rlm_sql (10.10.34.121): Client "WAKEL ALSABREA" (sql) added rlm_sql (sql): Adding client 10.10.34.159 (ALHRCHA) to global clients list rlm_sql (10.10.34.159): Client "ALHRCHA" (sql) added rlm_sql (sql): Adding client 10.1.34.192 (ABDO COFFEE) to global clients list rlm_sql (10.1.34.192): Client "ABDO COFFEE" (sql) added rlm_sql (sql): Adding client 10.10.35.15 (QURYAN COFFEE) to global clients list rlm_sql (10.10.35.15): Client "QURYAN COFFEE" (sql) added rlm_sql (sql): Adding client 10.10.35.106 (MARTAH) to global clients list rlm_sql (10.10.35.106): Client "MARTAH" (sql) added rlm_sql (sql): Adding client 10.10.35.115 (LIBYBA COFFEE) to global clients list rlm_sql (10.10.35.115): Client "LIBYBA COFFEE" (sql) added rlm_sql (sql): Adding client 10.10.35.136 (ALBSATEN) to global clients list rlm_sql (10.10.35.136): Client "ALBSATEN" (sql) added rlm_sql (sql): Adding client 10.10.35.146 (DEJNERO COFFEE) to global clients list rlm_sql (10.10.35.146): Client "DEJNERO COFFEE" (sql) added rlm_sql (sql): Adding client 10.10.35.149 (EVIL COFFEE) to global clients list rlm_sql (10.10.35.149): Client "EVIL COFFEE" (sql) added rlm_sql (sql): Adding client 10.10.35.151 (SUGYA COFFEE) to global clients list rlm_sql (10.10.35.151): Client "SUGYA COFFEE" (sql) added rlm_sql (sql): Adding client 10.10.35.160 (ISP_AP1) to global clients list rlm_sql (10.10.35.160): Client "ISP_AP1" (sql) added rlm_sql (sql): Adding client 10.10.35.175 (CANOVA COFFEE) to global clients list rlm_sql (10.10.35.175): Client "CANOVA COFFEE" (sql) added rlm_sql (sql): Adding client 10.100.13.4 (JAME3AT NASSER) to global clients list rlm_sql (10.100.13.4): Client "JAME3AT NASSER" (sql) added rlm_sql (sql): Adding client 10.10.32.107 (GREEN COFFEE) to global clients list rlm_sql (10.10.32.107): Client "GREEN COFFEE" (sql) added rlm_sql (sql): Adding client 10.100.13.10 (ALHCEY) to global clients list rlm_sql (10.100.13.10): Client "ALHCEY" (sql) added rlm_sql (sql): Adding client 10.10.32.111 (BENS3EB COFFEE) to global clients list rlm_sql (10.10.32.111): Client "BENS3EB COFFEE" (sql) added rlm_sql (sql): Adding client 10.10.35.123 (ALBASHA COFFEE) to global clients list rlm_sql (10.10.35.123): Client "ALBASHA COFFEE" (sql) added rlm_sql (sql): Adding client 10.100.13.127 (WAKEL NASSER) to global clients list rlm_sql (10.100.13.127): Client "WAKEL NASSER" (sql) added rlm_sql (sql): Adding client 10.100.13.128 (MASHTAL NASER) to global clients list rlm_sql (10.100.13.128): Client "MASHTAL NASER" (sql) added rlm_sql (sql): Adding client 10.100.13.129 (ALBSTAN COFFEE) to global clients list rlm_sql (10.100.13.129): Client "ALBSTAN COFFEE" (sql) added rlm_sql (sql): Adding client 10.100.13.142 (BERALWS3) to global clients list rlm_sql (10.100.13.142): Client "BERALWS3" (sql) added rlm_sql (sql): Adding client 10.100.13.145 (MASHTAL NASER ALBEHRY) to global clients list rlm_sql (10.100.13.145): Client "MASHTAL NASER ALBEHRY" (sql) added rlm_sql (sql): Adding client 10.100.13.157 (WADYE ALHYE) to global clients list rlm_sql (10.100.13.157): Client "WADYE ALHYE" (sql) added rlm_sql (sql): Adding client 10.10.37.106 (WAKEL WARSFANA) to global clients list rlm_sql (10.10.37.106): Client "WAKEL WARSFANA" (sql) added rlm_sql (sql): Adding client 10.100.13.55 (SAKH COFFEE) to global clients list rlm_sql (10.100.13.55): Client "SAKH COFFEE" (sql) added rlm_sql (sql): Adding client 10.10.35.177 (AL3GRBY) to global clients list rlm_sql (10.10.35.177): Client "AL3GRBY" (sql) added rlm_sql (sql): Adding client 10.10.31.107 (BIR HASSAN CAFFEE) to global clients list rlm_sql (10.10.31.107): Client "BIR HASSAN CAFFEE" (sql) added rlm_sql (sql): Adding client 10.10.31.110 (Bir Hassan marwan Coffee) to global clients list rlm_sql (10.10.31.110): Client "Bir Hassan marwan Coffee" (sql) added rlm_sql (sql): Adding client 10.10.31.113 (HOTSPOT MAJDEY) to global clients list rlm_sql (10.10.31.113): Client "HOTSPOT MAJDEY" (sql) added rlm_sql (sql): Adding client 10.10.34.190 (HOTSPOT ABDO) to global clients list rlm_sql (10.10.34.190): Client "HOTSPOT ABDO" (sql) added rlm_sql (sql): Adding client 10.10.35.117 (HOTSPOT CHECIOG) to global clients list rlm_sql (10.10.35.117): Client "HOTSPOT CHECIOG" (sql) added rlm_sql (sql): Adding client 10.10.34.60 (HOTSPOT SMAFRO AB3ESA) to global clients list rlm_sql (10.10.34.60): Client "HOTSPOT SMAFRO AB3ESA" (sql) added rlm_sql (sql): Adding client 10.10.32.61 (HOTSPOT WARCHVANA) to global clients list rlm_sql (10.10.32.61): Client "HOTSPOT WARCHVANA" (sql) added rlm_sql (sql): Adding client 10.10.32.63 (HOTSPOT SU) to global clients list rlm_sql (10.10.32.63): Client "HOTSPOT SU" (sql) added rlm_sql (sql): Adding client 10.10.35.132 (HOTSPOT ALHNCHE (BNEYNEY)) to global clients list rlm_sql (10.10.35.132): Client "HOTSPOT ALHNCHE (BNEYNEY)" (sql) added rlm_sql (sql): Adding client 10.10.34.61 (HOTSPOT ALRGATA) to global clients list rlm_sql (10.10.34.61): Client "HOTSPOT ALRGATA" (sql) added rlm_sql (sql): Adding client 10.10.35.110 (Hotspot BN) to global clients list rlm_sql (10.10.35.110): Client "Hotspot BN" (sql) added rlm_sql (sql): Adding client 10.10.33.156 (HOTSPOT KASHF JRBO3) to global clients list rlm_sql (10.10.33.156): Client "HOTSPOT KASHF JRBO3" (sql) added rlm_sql (sql): Adding client 10.10.35.126 (Panorama Cafe) to global clients list rlm_sql (10.10.35.126): Client "Panorama Cafe" (sql) added rlm_sql (sql): Adding client 10.10.37.110 (HOTSPOT WARCHVANA 2) to global clients list rlm_sql (10.10.37.110): Client "HOTSPOT WARCHVANA 2" (sql) added rlm_sql (sql): Adding client 10.10.33.11 (hotspot almudan) to global clients list rlm_sql (10.10.33.11): Client "hotspot almudan" (sql) added rlm_sql (sql): Adding client 10.10.31.108 (home) to global clients list rlm_sql (10.10.31.108): Client "home" (sql) added rlm_sql (sql): Adding client 10.10.35.137 (TQAT3 3KRA COFFEE) to global clients list rlm_sql (10.10.35.137): Client "TQAT3 3KRA COFFEE" (sql) added rlm_sql (sql): Adding client 10.10.35.116 (ALSL3A) to global clients list rlm_sql (10.10.35.116): Client "ALSL3A" (sql) added rlm_sql (sql): Adding client 10.254.10.2 (HOTSPOT ZWR1_MELANO) to global clients list rlm_sql (10.254.10.2): Client "HOTSPOT ZWR1_MELANO" (sql) added rlm_sql (sql): Adding client 10.10.35.20 (HOTSPOT BEN3AMER) to global clients list rlm_sql (10.10.35.20): Client "HOTSPOT BEN3AMER" (sql) added rlm_sql (sql): Adding client 10.10.35.21 (Billiards Cofe) to global clients list rlm_sql (10.10.35.21): Client "Billiards Cofe" (sql) added rlm_sql (sql): Adding client 10.254.10.3 (hotspot ZW 2) to global clients list rlm_sql (10.254.10.3): Client "hotspot ZW 2" (sql) added rlm_sql (sql): Adding client 10.100.13.70 (Nasser New 2018) to global clients list rlm_sql (10.100.13.70): Client "Nasser New 2018" (sql) added rlm_sql (sql): Adding client 10.254.10.4 (ZWORA malboro) to global clients list rlm_sql (10.254.10.4): Client "ZWORA malboro" (sql) added rlm_sql (sql): Adding client 0.10.35.177 (AL3GRBEY) to global clients list rlm_sql (0.10.35.177): Client "AL3GRBEY" (sql) added rlm_sql (sql): Adding client 10.254.1.6 (????? ??????? 5) to global clients list rlm_sql (10.254.1.6): Client "????? ??????? 5" (sql) added rlm_sql (sql): Adding client 10.10.34.9 (????? ?????? 3) to global clients list rlm_sql (10.10.34.9): Client "????? ?????? 3" (sql) added rlm_sql (sql): Adding client 10.80.1.2 (hotspot test 2018) to global clients list rlm_sql (10.80.1.2): Client "hotspot test 2018" (sql) added rlm_sql (sql): Adding client 10.10.34.3 (?????? 2) to global clients list rlm_sql (10.10.34.3): Client "?????? 2" (sql) added rlm_sql (sql): Adding client 10.10.34.4 (?????? 3) to global clients list rlm_sql (10.10.34.4): Client "?????? 3" (sql) added rlm_sql (sql): Adding client 10.40.47.1 (jkhjkhjk) to global clients list rlm_sql (10.40.47.1): Client "jkhjkhjk" (sql) added rlm_sql (sql): Adding client 10.40.47.253 (local) to global clients list rlm_sql (10.40.47.253): Client "local" (sql) added rlm_sql (sql): Adding client 127.0.0.1 (gfgfdgfdg) to global clients list rlm_sql (127.0.0.1): Client "gfgfdgfdg" (sql) added rlm_sql (sql): Released connection (0) # Instantiating module "preprocess" from file /etc/freeradius/mods-enabled/preprocess reading pairlist file /etc/freeradius/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/mods-config/preprocess/hints # Instantiating module "expiration" from file /etc/freeradius/mods-enabled/expiration # Instantiating module "logintime" from file /etc/freeradius/mods-enabled/logintime # Instantiating module "IPASS" from file /etc/freeradius/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/mods-enabled/realm # Instantiating module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "auth_log" from file /etc/freeradius/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log # Instantiating module "mschap" from file /etc/freeradius/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "detail" from file /etc/freeradius/mods-enabled/detail # Instantiating module "reject" from file /etc/freeradius/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/mods-enabled/always # Instantiating module "cache_eap" from file /etc/freeradius/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "files" from file /etc/freeradius/mods-enabled/files reading pairlist file /etc/freeradius/mods-config/files/authorize reading pairlist file /etc/freeradius/mods-config/files/accounting reading pairlist file /etc/freeradius/mods-config/files/pre-proxy # Instantiating module "pap" from file /etc/freeradius/mods-enabled/pap # Instantiating module "linelog" from file /etc/freeradius/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/mods-enabled/linelog # Instantiating module "eap" from file /etc/freeradius/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/certs" pem_file_type = yes private_key_file = "/etc/freeradius/certs/server.pem" certificate_file = "/etc/freeradius/certs/server.pem" ca_file = "/etc/freeradius/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/freeradius/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" ecdh_curve = "prime256v1" cache { enable = yes lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/radiusd.conf } # server server default { # from file /etc/freeradius/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading session {...} # Loading post-auth {...} } # server default server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} } # server inner-tunnel /etc/freeradius/sites-enabled/default[244]: Please change "%{control:Tmp-String-1}" to &control:Tmp-String-1 radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 0 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on proxy address * port 33448 Listening on proxy address :: port 37022 Ready to process requests (0) Received Access-Request Id 1 from 127.0.0.1:55529 to 127.0.0.1:1812 length 124 (0) NAS-IP-Address = 10.40.47.1 (0) Framed-Protocol = PPP (0) Service-Type = Login-User (0) Framed-IP-Address = 10.40.47.200 (0) Calling-Station-Id = "10.40.47.200" (0) NAS-Identifier = "Ahmed" (0) Acct-Session-Id = "fdfsdfsdf" (0) NAS-Port-Type = PPPoEoE (0) Acct-Status-Type = Interim-Update (0) Acct-Delay-Time = 10 (0) Port-Limit = 5 (0) User-Name = "test" (0) User-Password = "test" (0) # Executing section authorize from file /etc/freeradius/sites-enabled/default (0) authorize { (0) update { (0) Executing: /usr/bin/php5 /var/www/html/set_idle_timeout.php %{User-Name} %{%{User-Password}:-%{Chap-Password}} %{Framed-IP-Address} 3 %{Calling-Station-Id} %{Framed-Protocol} %{NAS-Identifier} : (0) EXPAND %{User-Name} (0) --> test (0) EXPAND %{%{User-Password}:-%{Chap-Password}} (0) --> test (0) EXPAND %{Framed-IP-Address} (0) --> 10.40.47.200 (0) EXPAND %{Calling-Station-Id} (0) --> 10.40.47.200 (0) EXPAND %{Framed-Protocol} (0) --> PPP (0) EXPAND %{NAS-Identifier} (0) --> Ahmed (0) Program returned code (0) and output ' Idle-Timeout :='180',Mikrotik-Rate-Limit :="5120k/0 0/0 0/0 0/0 8", Idle-Timeout :='180'' (0) control::Idle-Timeout := 180 (0) control::Mikrotik-Rate-Limit := 5120k/0 0/0 0/0 0/0 8 (0) control::Idle-Timeout := 180 (0) } # update = noop (0) update reply { (0) No attributes updated (0) No attributes updated (0) No attributes updated (0) No attributes updated (0) Mikrotik-Rate-Limit := &control:Mikrotik-Rate-Limit -> '5120k/0 0/0 0/0 0/0 8' (0) } # update reply = noop (0) [chap] = noop (0) [mschap] = noop (0) sql: EXPAND %{User-Name} (0) sql: --> test (0) sql: SQL-User-Name set to 'test' rlm_sql (sql): Reserved connection (1) (0) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}'AND a='0' ORDER BY id (0) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'test'AND a='0' ORDER BY id (0) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'test'AND a='0' ORDER BY id (0) sql: User found in radcheck table (0) sql: Conditional check items matched, merging assignment check items (0) sql: Cleartext-Password := "test" (0) sql: Expiration := "Jan 20 2019 13:26:26 EET" (0) sql: Simultaneous-Use := 1 (0) sql: EXPAND SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}'AND a='0' ORDER BY id (0) sql: --> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'test'AND a='0' ORDER BY id (0) sql: Executing select query: SELECT id, username, attribute, value, op FROM radreply WHERE username = 'test'AND a='0' ORDER BY id (0) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority (0) sql: --> SELECT groupname FROM radusergroup WHERE username = 'test' ORDER BY priority (0) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = 'test' ORDER BY priority (0) sql: User found in the group table (0) sql: EXPAND SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id (0) sql: --> SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '=3F=3F=3F=3F=3F=3F=3F=3F=3F=3F 60=3F=3F=3F=3F=3F=3F=3F=3F=3F=3F=3F' ORDER BY id (0) sql: Executing select query: SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '=3F=3F=3F=3F=3F=3F=3F=3F=3F=3F 60=3F=3F=3F=3F=3F=3F=3F=3F=3F=3F=3F' ORDER BY id (0) sql: Group "?????????? 60???????????": Conditional check items matched (0) sql: Group "?????????? 60???????????": Merging assignment check items rlm_sql (sql): Released connection (1) (0) [sql] = ok (0) expiration: Account will expire at 'Jan 20 2019 13:26:26 EET' (0) [expiration] = ok (0) if (userlock && !"%{control:Tmp-String-1}") { (0) if (userlock && !"%{control:Tmp-String-1}") -> FALSE (0) [pap] = updated (0) } # authorize = updated (0) Found Auth-Type = PAP (0) # Executing group from file /etc/freeradius/sites-enabled/default (0) Auth-Type PAP { (0) pap: Login attempt with password (0) pap: Comparing with "known good" Cleartext-Password (0) pap: User authenticated successfully (0) [pap] = ok (0) } # Auth-Type PAP = ok (0) # Executing section session from file /etc/freeradius/sites-enabled/default (0) session { (0) sql: EXPAND %{User-Name} (0) sql: --> test (0) sql: SQL-User-Name set to 'test' (0) sql: EXPAND SELECT COUNT(*) FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL (0) sql: --> SELECT COUNT(*) FROM radacct WHERE username = 'test' AND acctstoptime IS NULL rlm_sql (sql): Reserved connection (2) (0) sql: Executing select query: SELECT COUNT(*) FROM radacct WHERE username = 'test' AND acctstoptime IS NULL rlm_sql (sql): Released connection (2) (0) [sql] = ok (0) } # session = ok (0) # Executing section post-auth from file /etc/freeradius/sites-enabled/default (0) post-auth { (0) sql: EXPAND .query (0) sql: --> .query (0) sql: Using query template 'query' rlm_sql (sql): Reserved connection (3) (0) sql: EXPAND %{User-Name} (0) sql: --> test (0) sql: SQL-User-Name set to 'test' (0) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate, nasipaddress, macaddress,framedipaddress) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', CURRENT_TIMESTAMP(),'%{NAS-IP-Address}', '%{Calling-Station-ID}', '%{Framed-IP-Address}' ) (0) sql: --> INSERT INTO radpostauth (username, pass, reply, authdate, nasipaddress, macaddress,framedipaddress) VALUES ( 'test', 'test', 'Access-Accept', CURRENT_TIMESTAMP(),'10.40.47.1', '10.40.47.200', '10.40.47.200' ) (0) sql: Executing query: INSERT INTO radpostauth (username, pass, reply, authdate, nasipaddress, macaddress,framedipaddress) VALUES ( 'test', 'test', 'Access-Accept', CURRENT_TIMESTAMP(),'10.40.47.1', '10.40.47.200', '10.40.47.200' ) (0) sql: SQL query returned: success (0) sql: 1 record(s) updated rlm_sql (sql): Released connection (3) (0) [sql] = ok (0) } # post-auth = ok (0) Sent Access-Accept Id 1 from 127.0.0.1:1812 to 127.0.0.1:55529 length 0 (0) Mikrotik-Rate-Limit := "5120k/0 0/0 0/0 0/0 8" (0) Session-Timeout = 2668485 (0) Finished request Waking up in 4.9 seconds. (0) Cleaning up request packet ID 1 with timestamp +8 Ready to process requests

3 8

Capacity calculation
by Raghu nathan 20 Dec '18

20 Dec '18

Hello Team, I want to understand how much TPS freeRADIUS will support for below configuration along with postgresql DB Consider postgresql is hosted separately without any capacity limitation. Option1 : 1GB RAM, 1core CPU Option2 : 2GB RAM, 1core CPU Option3 : 4GB RAM, 2core CPU Option4 : 8GB RAM, 2core CPU Regards, Raghu

3 2

Re: Freeradius-Users Digest, Vol 164, Issue 38
by Imdad Hasan 19 Dec '18

19 Dec '18

Thank you Herwin, In this Documentation of FreeRadius Passwords, the CHAP and MS-CHAP support the Cleartext-Password, so can i get the Cleartext-Password in my php authentication script? On Wed, Dec 19, 2018 at 4:30 PM < freeradius-users-request(a)lists.freeradius.org> wrote: > Send Freeradius-Users mailing list submissions to > freeradius-users(a)lists.freeradius.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.freeradius.org/mailman/listinfo/freeradius-users > or, via email, send a message with subject or body 'help' to > freeradius-users-request(a)lists.freeradius.org > > You can reach the person managing the list at > freeradius-users-owner(a)lists.freeradius.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Freeradius-Users digest..." > > > Today's Topics: > > 1. Re: RESTful API (Alan DeKok) > 2. Re: RESTful API (Daniel Kong) > 3. Capacity calculation (Raghu nathan) > 4. Re: Capacity calculation (Nathan Ward) > 5. plain-text password not get with CHAP (Imdad Hasan) > 6. Re: plain-text password not get with CHAP (Herwin Weststrate) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Tue, 18 Dec 2018 06:56:05 -0500 > From: Alan DeKok <aland(a)deployingradius.com> > To: FreeRadius users mailing list > <freeradius-users(a)lists.freeradius.org> > Subject: Re: RESTful API > Message-ID: <B1E0A9A8-99D0-413E-96DB-A766824CF2E9(a)deployingradius.com> > Content-Type: text/plain; charset=us-ascii > > > > On Dec 17, 2018, at 11:15 PM, Daniel Kong <daniel.kongyh(a)gmail.com> > wrote: > > > > I know you guys are very busy helping the rest but I hope you can help me > > with this. I would like freeradius to authenticate with 3rd party > > application via REST API. I do have the configuration like below. > > > > connect_uri = "http://10.18.6.22:8081/apps/" > > authenticate { > > uri = "${..connect_uri}/user/%{User-Name}/%{User-Password}" > > method = "get" > > } > > OK... > > > Problem is that I do not know what to be included in the request and > > response for every authenticate, authorize, post-auth, and accounting. > For > > the response, I just include the HTTP status is sufficient for > > authentication? How about the response for authorize, post-auth, and > > accounting? > > You don't need to include anything in the response. The documentation > describes how the module works and what it does. > > FreeRADIUS treats the REST API as just another database. There's no > "requirement" to put anything into SQL, so there's no requirement to put > anything in REST. > > > If the freeRadius is configured to use RESTful API, does other post-auth, > > authorize, and accounting can be use with mysql so that only > authentication > > is using rest? > > Yes. You just list "rest" in the authenticate section, and "sql" > elsewhere. > > Alan DeKok. > > > > > > ------------------------------ > > Message: 2 > Date: Wed, 19 Dec 2018 12:01:30 +0800 > From: Daniel Kong <daniel.kongyh(a)gmail.com> > To: FreeRadius users mailing list > <freeradius-users(a)lists.freeradius.org> > Subject: Re: RESTful API > Message-ID: > < > CALvNz2haTvGQvUadZHMaWVh3gRmAKK44+FTUeeFp30sczSJ4PQ(a)mail.gmail.com> > Content-Type: text/plain; charset="UTF-8" > > Thanks for the feedback, Alan. I have more questions to ask regarding the > REST authentication. How does the freeRadius know that when to let the user > to gain access to the resources after invoke REST authentication? Does it > rely on the REST response http status? Eg. if the 3rd party application > returns a http status 200 means that the user is authenticated and able to > use the resource. However if the REST response returns a http status 401 > means that he/she is unauthorized. Does the freeRadius interpret it this > way? > > In order to use REST authentication only while the others like post-auth, > authorize, and accounting using the sql, I only need to configure the REST > for authentication. So my configuration would look like this? I just > comment off post-auth, authorize, and accounting. Correct me if I am wrong. > > rest { > tls { > ... > } > > authentication { > } > > #authorize { > #} > > #post-auth { > #} > > #accounting { > #} > > pool { > ... > } > } > > So after authenticate is successful, freeRadius will do insertion of record > to radpostauth and radacct table by itself? > > Our current usage of freeRadius is with mySQL. So we will insert record to > radcheck and radreply table while the rest of the table will be handled by > freeRadius. Now if we are using the REST for authentication, do we still > need to insert record to radcheck and radreply? Do we still rely on the > 'Auth-Type' in the radcheck table? > > Daniel. > > > On Tue, Dec 18, 2018 at 7:57 PM Alan DeKok <aland(a)deployingradius.com> > wrote: > > > > > > On Dec 17, 2018, at 11:15 PM, Daniel Kong <daniel.kongyh(a)gmail.com> > > wrote: > > > > > > I know you guys are very busy helping the rest but I hope you can help > me > > > with this. I would like freeradius to authenticate with 3rd party > > > application via REST API. I do have the configuration like below. > > > > > > connect_uri = "http://10.18.6.22:8081/apps/" > > > authenticate { > > > uri = "${..connect_uri}/user/%{User-Name}/%{User-Password}" > > > method = "get" > > > } > > > > OK... > > > > > Problem is that I do not know what to be included in the request and > > > response for every authenticate, authorize, post-auth, and accounting. > > For > > > the response, I just include the HTTP status is sufficient for > > > authentication? How about the response for authorize, post-auth, and > > > accounting? > > > > You don't need to include anything in the response. The documentation > > describes how the module works and what it does. > > > > FreeRADIUS treats the REST API as just another database. There's no > > "requirement" to put anything into SQL, so there's no requirement to put > > anything in REST. > > > > > If the freeRadius is configured to use RESTful API, does other > post-auth, > > > authorize, and accounting can be use with mysql so that only > > authentication > > > is using rest? > > > > Yes. You just list "rest" in the authenticate section, and "sql" > > elsewhere. > > > > Alan DeKok. > > > > > > > > - > > List info/subscribe/unsubscribe? See > > http://www.freeradius.org/list/users.html > > > ------------------------------ > > Message: 3 > Date: Wed, 19 Dec 2018 14:55:14 +0530 > From: Raghu nathan <raghu.vdm(a)gmail.com> > To: freeradius-users(a)lists.freeradius.org > Subject: Capacity calculation > Message-ID: > <CAJea6dOy+hHtsOAMpadwatq= > LrmCLPm4yF7sF55BmhT7ZFKgYA(a)mail.gmail.com> > Content-Type: text/plain; charset="UTF-8" > > Hello Team, > > I want to understand how much TPS freeRADIUS will support for below > configuration along with postgresql DB > > Consider postgresql is hosted separately without any capacity limitation. > > Option1 : 1GB RAM, 1core CPU > Option2 : 2GB RAM, 1core CPU > Option3 : 4GB RAM, 2core CPU > Option4 : 8GB RAM, 2core CPU > > Regards, > Raghu > > > ------------------------------ > > Message: 4 > Date: Wed, 19 Dec 2018 23:19:00 +1300 > From: Nathan Ward <lists+freeradius(a)daork.net> > To: FreeRadius users mailing list > <freeradius-users(a)lists.freeradius.org> > Subject: Re: Capacity calculation > Message-ID: <7C4335D6-CC72-4143-BD10-757C87DE09BF(a)daork.net> > Content-Type: text/plain; charset=utf-8 > > > > On 19/12/2018, at 10:25 PM, Raghu nathan <raghu.vdm(a)gmail.com> wrote: > > > > Hello Team, > > > > I want to understand how much TPS freeRADIUS will support for below > > configuration along with postgresql DB > > > > Consider postgresql is hosted separately without any capacity limitation. > > > > Option1 : 1GB RAM, 1core CPU > > Option2 : 2GB RAM, 1core CPU > > Option3 : 4GB RAM, 2core CPU > > Option4 : 8GB RAM, 2core CPU > > > That depends on: > > 1) Your configuration > 2) Your vm contention (sounds like VMs) > 3) Your IO, potentially > 4) Your database speed - database is by *far* the slowest part of this > 5) Packet types - auth? Accounting? > 6) What is a “core”? > 7) How fast is the RAM? > > And many, many, many more factors. > > To be clear - please do not answer the above questions - they are > presented as a non-exhaustive list of factors. > > You cannot get a reasonable answer on a question like this without testing > it in your environment with your configuration etc. > This is why you’ll rarely find “benchmarks” or similar. > > There are a myriad of ways to scale FreeRADIUS in almost any direction, > depending on your workload. If you’ve been tasked with finding out if > FreeRADIUS can handle your load the answer is almost certainly yes - but > you may need to do some work to get it to, just as you would with any > solution. > > -- > Nathan Ward > > > > > ------------------------------ > > Message: 5 > Date: Wed, 19 Dec 2018 16:21:55 +0530 > From: Imdad Hasan <imdadalikadiwala0(a)gmail.com> > To: freeradius-users(a)lists.freeradius.org > Subject: plain-text password not get with CHAP > Message-ID: > <CAPidyMX9D3EQb= > ixjvo6u-iJCm7Q1v_N9sTBCZKOex5VAeNRAA(a)mail.gmail.com> > Content-Type: text/plain; charset="UTF-8" > > Respected All, > > I using Default *Auth-Type = Accept* and *php external script* for custom > authentication. That is working fine with only pap in PPPoE, But not > working with CHAP, MS-CHAPv2 etc. > > I found one reason was the external script not get the plain-text > password.Usually i get password in external php script with > *trim(getenv('USER_PASSWORD'),'"'); > *this env variable. > > So, any way to get plain-text password in external script when chap is on > in mikrotik? > > Warm regards > Imdadali Kadiwala > > > ------------------------------ > > Message: 6 > Date: Wed, 19 Dec 2018 11:57:27 +0100 > From: Herwin Weststrate <herwin(a)quarantainenet.nl> > To: freeradius-users(a)lists.freeradius.org > Subject: Re: plain-text password not get with CHAP > Message-ID: <c5afe74d-8169-813f-f90c-a3d3b0b2ccb4(a)quarantainenet.nl> > Content-Type: text/plain; charset=utf-8 > > On 19-12-18 11:51, Imdad Hasan wrote: > > Respected All, > > > > I using Default *Auth-Type = Accept* and *php external script* for custom > > authentication. That is working fine with only pap in PPPoE, But not > > working with CHAP, MS-CHAPv2 etc. > > > > I found one reason was the external script not get the plain-text > > password.Usually i get password in external php script with > > *trim(getenv('USER_PASSWORD'),'"'); > > *this env variable. > > > > So, any way to get plain-text password in external script when chap is on > > in mikrotik? > > No, simply because CHAP and MSCHAP don't send the plaintext password, > but hashes of the password. > > If you have access to the plaintext password in PHP, you could add this > to the config list and let the chap/mschap modules take care of it (but > then it would be unlikely you really needed PHP in the first place), > otherwise you're out of luck. > > See http://deployingradius.com/documents/protocols/compatibility.html > for a list of possible password hashing compatibilities. > > -- > Herwin Weststrate > > > > ------------------------------ > > Subject: Digest Footer > > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html > > ------------------------------ > > End of Freeradius-Users Digest, Vol 164, Issue 38 > ************************************************* >

1 0

plain-text password not get with CHAP
by Imdad Hasan 19 Dec '18

19 Dec '18

Respected All, I using Default *Auth-Type = Accept* and *php external script* for custom authentication. That is working fine with only pap in PPPoE, But not working with CHAP, MS-CHAPv2 etc. I found one reason was the external script not get the plain-text password.Usually i get password in external php script with *trim(getenv('USER_PASSWORD'),'"'); *this env variable. So, any way to get plain-text password in external script when chap is on in mikrotik? Warm regards Imdadali Kadiwala

2 1

Anything special to apply a server cert by CSR for eap-tls?
by luckydog xf 14 Dec '18

14 Dec '18

Hi, Sorry to trouble you again, I create server.csr by make server.csr, when I apply a cert by server.csr created by 'make server.csr', MS Certificiate Authority said cannot find cert template for my csr. So I want to use Ca from MS CA, and sign a server.crt and key for Freeradius, client would use key/cert signed by MS CA. But I searched most of posts are MS NPS(network policy service).etc. So does anyone have expericenced this and offer me a little help? Thanks,

2 5

FreeRadius with EAP-TLS on windows 7, certs installed but not sent out.
by luckydog xf 14 Dec '18

14 Dec '18

HI, I'm using EAP-TLS to do WI-FI authentication, I setup WPA2 enterprise + AES(CCMP) on my AP, and shared key on clients.conf of radius. I also used make ca.pem, make server.pem and make client.pem on /etc/raddb/certs, and copied ca.der and client.pem(rename to client.crt) on windows7, installed ca.der on 'trusted root certification authorities' and client.crt on 'personal' respectively. When I tried to connect the SSID of that AP, nothing was sent out to radius server, no Access-Request, I also used WireShark to capture packets of my wireless NIC, nothing at all. Looks it keeps trying to connect this SSID, and pops up messages that certificate is required... please contact your IT admins.etc, thing like that. My wireless NIC works as I tried to connect another SSID with password, wireshark showed inbound and outbound packets. So any idea why win7 does not send out any packet? Anything is wrong? I used scripts of certs/ Makefile, so extended key usage required by windows is added. Thanks,

3 8

Simultaneous-Use restriction not working with radutmp
by Felix Rimkus 13 Dec '18

13 Dec '18

Hi, I have been using freeradius inside pfsense for a while, but there has been an issue with the Simultaneous-Use option since an update about 1 year ago. I now also setup freeradius on an external server just to verify this behavior, and I noticed the same issues. I want to use radutmp for Simultaneous-Use restriction. I have accounting packages enabled, and the file gets created inside /var/log/radius and filled with data related to user names. I have the option set in my users file: "test" Cleartext-Password := "1234", Simultaneous-Use := "1" Before the issue appeared this used to work fine, but now it seems to have absolutely no effect. The username "test" appears two times in the radutmp file, yet none of the users is ever disconnected. log snippet: (2) pap: User authenticated successfully (2) [pap] = ok (2) } # Auth-Type PAP = ok (2) # Executing section session from file /etc/raddb/sites-enabled/default (2) session { (2) radutmp: EXPAND /var/log/radius/radutmp (2) radutmp: --> /var/log/radius/radutmp (2) [radutmp] = ok (2) } # session = ok (2) # Executing section post-auth from file /etc/raddb/sites-enabled/default (2) post-auth { (2) update { (2) No attributes updated (2) } # update = noop the [radutmp] module always returns ok The only suggestion on how to solve this has been to use the sql variant (which is why the sql modules appear in log below) but I would prefer getting this to work as it did originally. Any help would be appreciated. Kind Regards, Felix radiusd -X output: FreeRADIUS Version 3.0.13 Copyright (C) 1999-2017 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/raddb/dictionary including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/mods-enabled/ including configuration file /etc/raddb/mods-enabled/digest including configuration file /etc/raddb/mods-enabled/unix including configuration file /etc/raddb/mods-enabled/detail.log including configuration file /etc/raddb/mods-enabled/mschap including configuration file /etc/raddb/mods-enabled/attr_filter including configuration file /etc/raddb/mods-enabled/passwd including configuration file /etc/raddb/mods-enabled/sradutmp including configuration file /etc/raddb/mods-enabled/exec including configuration file /etc/raddb/mods-enabled/date including configuration file /etc/raddb/mods-enabled/unpack including configuration file /etc/raddb/mods-enabled/expr including configuration file /etc/raddb/mods-enabled/dhcp including configuration file /etc/raddb/mods-enabled/chap including configuration file /etc/raddb/mods-enabled/utf8 including configuration file /etc/raddb/mods-enabled/replicate including configuration file /etc/raddb/mods-enabled/linelog including configuration file /etc/raddb/mods-enabled/logintime including configuration file /etc/raddb/mods-enabled/ntlm_auth including configuration file /etc/raddb/mods-enabled/expiration including configuration file /etc/raddb/mods-enabled/cache_eap including configuration file /etc/raddb/mods-enabled/always including configuration file /etc/raddb/mods-enabled/dynamic_clients including configuration file /etc/raddb/mods-enabled/pap including configuration file /etc/raddb/mods-enabled/sql including configuration file /etc/raddb/mods-config/sql/main/mysql/queries.conf including configuration file /etc/raddb/mods-enabled/preprocess including configuration file /etc/raddb/mods-enabled/realm including configuration file /etc/raddb/mods-enabled/radutmp including configuration file /etc/raddb/mods-enabled/echo including configuration file /etc/raddb/mods-enabled/files including configuration file /etc/raddb/mods-enabled/detail including configuration file /etc/raddb/mods-enabled/eap including configuration file /etc/raddb/mods-enabled/soh including files in directory /etc/raddb/policy.d/ including configuration file /etc/raddb/policy.d/control including configuration file /etc/raddb/policy.d/operator-name including configuration file /etc/raddb/policy.d/accounting including configuration file /etc/raddb/policy.d/dhcp including configuration file /etc/raddb/policy.d/canonicalization including configuration file /etc/raddb/policy.d/debug including configuration file /etc/raddb/policy.d/cui including configuration file /etc/raddb/policy.d/filter including configuration file /etc/raddb/policy.d/eap including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/inner-tunnel including configuration file /etc/raddb/sites-enabled/default main { security { user = "radiusd" group = "radiusd" allow_core_dumps = no } name = "radiusd" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" } main { name = "radiusd" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" libdir = "/usr/lib64/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client poppel { ipaddr = 176.199.151.164 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = mschap # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Auth-Type = digest # Creating Autz-Type = Status-Server # Creating Acct-Type = Status-Server radiusd: #### Instantiating modules #### modules { # Loaded module rlm_digest # Loading module "digest" from file /etc/raddb/mods-enabled/digest # Loaded module rlm_unix # Loading module "unix" from file /etc/raddb/mods-enabled/unix unix { radwtmp = "/var/log/radius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_detail # Loading module "auth_log" from file /etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_radutmp # Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_exec # Loading module "exec" from file /etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_date # Loading module "date" from file /etc/raddb/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/raddb/mods-enabled/unpack # Loaded module rlm_expr # Loading module "expr" from file /etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_dhcp # Loading module "dhcp" from file /etc/raddb/mods-enabled/dhcp # Loaded module rlm_chap # Loading module "chap" from file /etc/raddb/mods-enabled/chap # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/raddb/mods-enabled/utf8 # Loaded module rlm_replicate # Loading module "replicate" from file /etc/raddb/mods-enabled/replicate # Loaded module rlm_linelog # Loading module "linelog" from file /etc/raddb/mods-enabled/linelog linelog { filename = "/var/log/radius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/var/log/radius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loading module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/raddb/mods-enabled/expiration # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_always # Loading module "reject" from file /etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_pap # Loading module "pap" from file /etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_sql # Loading module "sql" from file /etc/raddb/mods-enabled/sql sql { driver = "rlm_sql_mysql" server = "localhost" port = 3306 login = "radius" password = <<< secret >>> radius_db = "radius" read_groups = yes read_profiles = yes read_clients = yes delete_stale_sessions = yes sql_user_name = "%{User-Name}" default_user_profile = "" client_query = "SELECT id, nasname, shortname, type, secret, server FROM nas" authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id" authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id" group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority" simul_count_query = "SELECT COUNT(*) FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" accounting { reference = "%{tolower:type.%{Acct-Status-Type}.query}" type { accounting-on { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})" } accounting-off { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})" } start { query = "INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}', FROM_UNIXTIME(%{integer:Event-Timestamp}), FROM_UNIXTIME(%{integer:Event-Timestamp}), NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}')" } interim-update { query = "UPDATE radacct SET acctupdatetime = (@acctupdatetime_old:=acctupdatetime), acctupdatetime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctinterval = %{integer:Event-Timestamp} - UNIX_TIMESTAMP(@acctupdatetime_old), framedipaddress = '%{Framed-IP-Address}', acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'" } stop { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'" } } } post-auth { reference = ".query" query = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')" } } rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked Creating attribute SQL-Group # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups" hints = "/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loading module "echo" from file /etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_files # Loading module "files" from file /etc/raddb/mods-enabled/files files { filename = "/etc/raddb/mods-config/files/authorize" acctusersfile = "/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy" } # Loading module "detail" from file /etc/raddb/mods-enabled/detail detail { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_eap # Loading module "eap" from file /etc/raddb/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_soh # Loading module "soh" from file /etc/raddb/mods-enabled/soh soh { dhcp = yes } instantiate { } # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject [/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response # Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog # Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime # Instantiating module "expiration" from file /etc/raddb/mods-enabled/expiration # Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "reject" from file /etc/raddb/mods-enabled/always # Instantiating module "fail" from file /etc/raddb/mods-enabled/always # Instantiating module "ok" from file /etc/raddb/mods-enabled/always # Instantiating module "handled" from file /etc/raddb/mods-enabled/always # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always # Instantiating module "noop" from file /etc/raddb/mods-enabled/always # Instantiating module "updated" from file /etc/raddb/mods-enabled/always # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap # Instantiating module "sql" from file /etc/raddb/mods-enabled/sql rlm_sql_mysql: libmysql version: 10.1.37-MariaDB mysql { tls { } warnings = "auto" } rlm_sql (sql): Attempting to connect to database "radius" rlm_sql (sql): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_sql (sql): Opening additional connection (0), 1 of 32 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.1.37-MariaDB, protocol version 10 rlm_sql (sql): Opening additional connection (1), 1 of 31 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.1.37-MariaDB, protocol version 10 rlm_sql (sql): Opening additional connection (2), 1 of 30 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.1.37-MariaDB, protocol version 10 rlm_sql (sql): Opening additional connection (3), 1 of 29 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.1.37-MariaDB, protocol version 10 rlm_sql (sql): Opening additional connection (4), 1 of 28 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.1.37-MariaDB, protocol version 10 rlm_sql (sql): Processing generate_sql_clients rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname, shortname, type, secret, server FROM nas rlm_sql (sql): Reserved connection (0) rlm_sql (sql): Executing select query: SELECT id, nasname, shortname, type, secret, server FROM nas rlm_sql (sql): Released connection (0) Need 5 more connections to reach 10 spares rlm_sql (sql): Opening additional connection (5), 1 of 27 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.1.37-MariaDB, protocol version 10 # Instantiating module "preprocess" from file /etc/raddb/mods-enabled/preprocess reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /etc/raddb/mods-config/preprocess/hints # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm # Instantiating module "files" from file /etc/raddb/mods-enabled/files reading pairlist file /etc/raddb/mods-config/files/authorize reading pairlist file /etc/raddb/mods-config/files/accounting reading pairlist file /etc/raddb/mods-config/files/pre-proxy # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/raddb/certs" pem_file_type = yes private_key_file = "/etc/raddb/certs/server.pem" certificate_file = "/etc/raddb/certs/server.pem" ca_file = "/etc/raddb/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/raddb/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/raddb/radiusd.conf } # server server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/raddb/sites-enabled/inner-tunnel:330 } # server inner-tunnel server default { # from file /etc/raddb/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading session {...} # Loading pre-proxy {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } listen { type = "auth" ipaddr = * port = 1812 } listen { type = "acct" ipaddr = * port = 1813 } Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on proxy address * port 59359 Ready to process requests

1 0