- Freeradius-Users - lists.freeradius.org

freeradius authentication problem
by Mallikarjuna 12 Jul '18

12 Jul '18

Hello, I'm implementing free-radius authentication with nginx web server, Actually free-radius server is authenticating properly when I send the user credentials from terminal. But when I send the user credentials from browser I'm not able to authenticate the user credentials with free-radius. I'm getting some issue in terminal, attached screenshot of it. Kindly let me know the solution. Best Regards,

5 6

Stale Sessions in FR vs Active users in NAS
by JAHANZAIB SYED 11 Jul '18

11 Jul '18

Scenario: Freeradius server ver 2.2.8 on Ubuntu Server. NAS is Mikrotik Router model ccr1036 ver 6.42.4 Problem: Sometimes dueto communication problems, we see difference in NAS online users vs Freeradius online users (radacct users with acctstoptime is NULL) If NAS and Radius communication disconnects BUT users are online in NAS, Radius will close all active sessions after 10 minutes (by our check stale script which checks lastupdate column in radacct, and because script will think NAS is offline it closes sessions to avoid false sessions/sim checks errors). Afterwards communication restores, and NAS sends already connected users accounting packets to RADIUS, FR will discards them because there are no active session in RADACCT that matches NAS sent acct session ID's. for single NAS i can use bash script, but for MULTIPLE NASES, If this is correct, then what is the solution to this problem? Regard's JZ <http:///>

2 1

Re: Waking up in 999995.9 seconds.
by Duncan Carter 11 Jul '18

11 Jul '18

> Date: Mon, 9 Jul 2018 12:16:06 -0400 > From: Alan DeKok <aland(a)deployingradius.com> > To: FreeRadius users mailing list > <freeradius-users(a)lists.freeradius.org> > Subject: Re: Waking up in 999995.9 seconds. > Message-ID: <7DB29C1F-AA12-495D-817F-793873EF1354(a)deployingradius.com> > Content-Type: text/plain; charset=us-ascii > > On Jul 9, 2018, at 9:38 AM, Duncan Carter <duncan.carter(a)comms365.com> wrote: > > We've got about 20 freeradius servers running for different customers, all have been happily running for months, the only config change I'm aware of is an additional interface on a new IP that's not currently in use. > > > > Last week, we started getting the following error coming up in the logs: > > > > Error: Dropping request (1025 is too many): from client admin port 58950 - ID: 81 ... > > Increase "max_requests", and check why the database is too slow. There's no database involved. Clients, users and logs are all flat files. We have a separate application that processes the log files. We wondered if that's locking the log files somehow, so we tested turning off the app and it made no difference. > > > We've been restarting radiusd to get the service working again, but I've had a chance to run radiusd in debug mode today, and this stands out in the log files: > > tail -f radiusd_-X_debug.log | grep Waking > > Waking up in 0.3 seconds. > > Waking up in 999994.6 seconds. > > Waking up in 1999991.9 seconds. > > Waking up in 0.3 seconds. > > Waking up in 4.6 seconds. > > Waking up in 3.9 seconds. > > Waking up in 999995.9 seconds. > > Waking up in 1999991.9 seconds. > > Waking up in 3997746.1 seconds. > > > > Looking at that, it's only a matter of time before the 1024 threads/max_requests are asleep. Running it in debug mode overnight, it did indeed fall over when all of the threads were 'Waking up in 99999x.x seconds'. > > > > Can someone tell me why it's going to sleep for so long? > > Probably an issue with an older version of the server. > > Upgrade to 3.0.17. There's a feature we use that's not included with the newer versions, my colleague who was dealing with isn’t in the office at the moment but I'll find out what that was and test it on one side (dual DC). > > Alan Dekok. Duncan Carter.

3 4

Authentication issue
by Ryan Sinclair 11 Jul '18

11 Jul '18

Afternoon all, Looking for a little guidance on an issue we're seeing with a wifi module that we can't seem to get to authenticate to the RADIUS server (default setup on Ubuntu). We get to the Access-Challenge but then nothing and eventually the session just errors out and says it did not finish. Output from debug below. BEGIN---- rad_recv: Access-Request packet from host 10.10.128.122 port 47803, id=88, length=255 User-Name = "WATENOVAT01" NAS-IP-Address = 10.10.128.122 Called-Station-Id = "02-18-4A-8D-3D-97:AHSMwmD" NAS-Port-Type = Wireless-802.11 Service-Type = Framed-User Calling-Station-Id = "00-1E-C0-6C-FB-0B" Connect-Info = "CONNECT 54.00 Mbps, 802.11g, RSSI: 57, Channel: 1" Acct-Session-Id = "EDBDA43598F12EF9" Acct-Multi-Session-Id = "837FBA629412F692" WLAN-Pairwise-Cipher = 1027076 WLAN-Group-Cipher = 1027076 WLAN-AKM-Suite = 1027073 Vendor-29671-Attr-1 = 0x424357 Framed-MTU = 1400 EAP-Message = 0x02db001001574154454e4f5641543031 Message-Authenticator = 0xad101bd76294451942d4c1cb39f4dd5e # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] No '@' in User-Name = "WATENOVAT01", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] = noop [eap] EAP packet type response id 219 length 16 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] = updated [files] users: Matched entry WATENOVAT01 at line 1 ++[files] = ok ++[expiration] = noop ++[logintime] = noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] = noop +} # group authorize = updated Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +group authenticate { [eap] EAP Identity [eap] processing type md5 rlm_eap_md5: Issuing Challenge ++[eap] = handled +} # group authenticate = handled Sending Access-Challenge of id 88 to 10.10.128.122 port 47803 EAP-Message = 0x01dc00160410432880d91d2b837246de218eef6e8d47 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x7b85dc127b59d8c1271c8cde542b7f71 Finished request 0. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.10.128.122 port 47803, id=89, length=263 User-Name = "WATENOVAT01" NAS-IP-Address = 10.10.128.122 Called-Station-Id = "02-18-4A-8D-3D-97:AHSMwmD" NAS-Port-Type = Wireless-802.11 Service-Type = Framed-User Calling-Station-Id = "00-1E-C0-6C-FB-0B" Connect-Info = "CONNECT 54.00 Mbps, 802.11g, RSSI: 57, Channel: 1" Acct-Session-Id = "EDBDA43598F12EF9" Acct-Multi-Session-Id = "837FBA629412F692" WLAN-Pairwise-Cipher = 1027076 WLAN-Group-Cipher = 1027076 WLAN-AKM-Suite = 1027073 Vendor-29671-Attr-1 = 0x424357 Framed-MTU = 1400 EAP-Message = 0x02dc00060319 State = 0x7b85dc127b59d8c1271c8cde542b7f71 Message-Authenticator = 0x15e7f8766ac76afc0990807b6cb3075d # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] No '@' in User-Name = "WATENOVAT01", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] = noop [eap] EAP packet type response id 220 length 6 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] = updated [files] users: Matched entry WATENOVAT01 at line 1 ++[files] = ok ++[expiration] = noop ++[logintime] = noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] = noop +} # group authorize = updated Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +group authenticate { [eap] Request found, released from the list [eap] EAP NAK [eap] EAP-NAK asked for EAP-Type/peap [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] = handled +} # group authenticate = handled Sending Access-Challenge of id 89 to 10.10.128.122 port 47803 EAP-Message = 0x01dd00061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x7b85dc127a58c5c1271c8cde542b7f71 Finished request 1. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.10.128.122 port 47803, id=90, length=329 User-Name = "WATENOVAT01" NAS-IP-Address = 10.10.128.122 Called-Station-Id = "02-18-4A-8D-3D-97:AHSMwmD" NAS-Port-Type = Wireless-802.11 Service-Type = Framed-User Calling-Station-Id = "00-1E-C0-6C-FB-0B" Connect-Info = "CONNECT 54.00 Mbps, 802.11g, RSSI: 57, Channel: 1" Acct-Session-Id = "EDBDA43598F12EF9" Acct-Multi-Session-Id = "837FBA629412F692" WLAN-Pairwise-Cipher = 1027076 WLAN-Group-Cipher = 1027076 WLAN-AKM-Suite = 1027073 Vendor-29671-Attr-1 = 0x424357 Framed-MTU = 1400 EAP-Message = 0x02dd004819800000003e160301003901000035030100000001817ce41b057ae4ede29f237477a06811e1443fb62c5d4defb9f7814c000008002f00050004000a0100000400230000 State = 0x7b85dc127a58c5c1271c8cde542b7f71 Message-Authenticator = 0x4b72c60a28cb7368aae176e8e54fcc89 # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] No '@' in User-Name = "WATENOVAT01", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] = noop [eap] EAP packet type response id 221 length 72 [eap] Continuing tunnel setup. ++[eap] = ok +} # group authorize = ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +group authenticate { [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 62 [peap] Length Included [peap] eaptls_verify returned 11 [peap] (other): before/accept initialization [peap] TLS_accept: before/accept initialization [peap] <<< Unknown TLS version [length 0005] [peap] <<< TLS 1.0 Handshake [length 0039], ClientHello [peap] TLS_accept: unknown state [peap] >>> Unknown TLS version [length 0005] [peap] >>> TLS 1.0 Handshake [length 002a], ServerHello [peap] TLS_accept: unknown state [peap] >>> Unknown TLS version [length 0005] [peap] >>> TLS 1.0 Handshake [length 02c0], Certificate [peap] TLS_accept: unknown state [peap] >>> Unknown TLS version [length 0005] [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [peap] TLS_accept: unknown state [peap] TLS_accept: unknown state [peap] TLS_accept: unknown state [peap] TLS_accept: Need to read more data: unknown state [peap] TLS_accept: Need to read more data: unknown state In SSL Handshake Phase In SSL Accept mode [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] = handled +} # group authenticate = handled Sending Access-Challenge of id 90 to 10.10.128.122 port 47803 EAP-Message = 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 EAP-Message = 0xe3f5cb286a75bd28fd1d5bf806f91f252bd17974c0987e4e99447ee481fb2cafa44f633529d358a6933c9b7d1393914cede0d4211ba354d617223eb6a866833218a755dd49c6e4ad5be5a6f682bab73a3ef50e365b3f8cf67e34b34e69003d344ae86042629f844a96b4432d34a66a03337ac4b4337b42662f9ee72f6becc4402a002a970a6557a5b406146625ec45468f233dfb163dcfb064001cc1cf485562a2d1b28a6620d4fbe378d143dddfc8510ccceb0fb52e65f755b990bb83c4afd0a17a49119de609110848c1f40b1226406eb5785a790203010001a30d300b30090603551d1304023000300d06092a864886f70d01010b05000382010100 EAP-Message = 0x54b189ccdf1ef6284e17923457f5166c5394de23b150b0abe6ced4dc1b807ae8ecce775348a252d01631063f1947927d4916263dad5be918070429a3cc34190a7a19c80a9c720d509a6d8a581baec2407c3348ce50e57d0825c71ca292a89ec6b67e8ea1102f5d1b633ab067a66a5567a50be9457f9d72e14a7479273c4ace4b96ed82d62367f03edad46626d5d3c84996c67bf4995cd6f7dbacf50af8a018ac8ca2c7cee6e36bb4d27832c33764a33d2622d08e9857298a69a48a87ccf31fa7c082eb6f63db5527e7e803bd1c4a928d972f2b04f475e6d10066f2c27853a44dbf7a6d8ebc3978d5656f5a7ecbcc8d5e1ff24ed9782abd06ca120fa8bf EAP-Message = 0x21948916030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x7b85dc12795bc5c1271c8cde542b7f71 Finished request 2. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.10.128.122 port 47803, id=91, length=255 User-Name = "WATENOVAT01" NAS-IP-Address = 10.10.128.122 Called-Station-Id = "02-18-4A-8D-3D-97:AHSMwmD" NAS-Port-Type = Wireless-802.11 Service-Type = Framed-User Calling-Station-Id = "00-1E-C0-6C-FB-0B" Connect-Info = "CONNECT 54.00 Mbps, 802.11g, RSSI: 56, Channel: 1" Acct-Session-Id = "103A93CA9F945C99" Acct-Multi-Session-Id = "FB64B58512B66D42" WLAN-Pairwise-Cipher = 1027076 WLAN-Group-Cipher = 1027076 WLAN-AKM-Suite = 1027073 Vendor-29671-Attr-1 = 0x424357 Framed-MTU = 1400 EAP-Message = 0x025c001001574154454e4f5641543031 Message-Authenticator = 0xe08641665202ffc7100c4207b5f8bec5 # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] No '@' in User-Name = "WATENOVAT01", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] = noop [eap] EAP packet type response id 92 length 16 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] = updated [files] users: Matched entry WATENOVAT01 at line 1 ++[files] = ok ++[expiration] = noop ++[logintime] = noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] = noop +} # group authorize = updated Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +group authenticate { [eap] EAP Identity [eap] processing type md5 rlm_eap_md5: Issuing Challenge ++[eap] = handled +} # group authenticate = handled Sending Access-Challenge of id 91 to 10.10.128.122 port 47803 EAP-Message = 0x015d001604101d0ceee96b1ae4d80d70ba8b61634fef Message-Authenticator = 0x00000000000000000000000000000000 State = 0x7be386297bbe82a4fe9b40e370a4c69f Finished request 3. Going to the next request Waking up in 4.7 seconds. rad_recv: Access-Request packet from host 10.10.128.122 port 47803, id=92, length=263 User-Name = "WATENOVAT01" NAS-IP-Address = 10.10.128.122 Called-Station-Id = "02-18-4A-8D-3D-97:AHSMwmD" NAS-Port-Type = Wireless-802.11 Service-Type = Framed-User Calling-Station-Id = "00-1E-C0-6C-FB-0B" Connect-Info = "CONNECT 54.00 Mbps, 802.11g, RSSI: 57, Channel: 1" Acct-Session-Id = "103A93CA9F945C99" Acct-Multi-Session-Id = "FB64B58512B66D42" WLAN-Pairwise-Cipher = 1027076 WLAN-Group-Cipher = 1027076 WLAN-AKM-Suite = 1027073 Vendor-29671-Attr-1 = 0x424357 Framed-MTU = 1400 EAP-Message = 0x025d00060319 State = 0x7be386297bbe82a4fe9b40e370a4c69f Message-Authenticator = 0xbcbe8b61c4739469b2df1f125e7d5338 # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] No '@' in User-Name = "WATENOVAT01", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] = noop [eap] EAP packet type response id 93 length 6 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] = updated [files] users: Matched entry WATENOVAT01 at line 1 ++[files] = ok ++[expiration] = noop ++[logintime] = noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] = noop +} # group authorize = updated Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +group authenticate { [eap] Request found, released from the list [eap] EAP NAK [eap] EAP-NAK asked for EAP-Type/peap [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] = handled +} # group authenticate = handled Sending Access-Challenge of id 92 to 10.10.128.122 port 47803 EAP-Message = 0x015e00061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x7be386297abd9fa4fe9b40e370a4c69f Finished request 4. Going to the next request Waking up in 4.7 seconds. rad_recv: Access-Request packet from host 10.10.128.122 port 47803, id=93, length=329 User-Name = "WATENOVAT01" NAS-IP-Address = 10.10.128.122 Called-Station-Id = "02-18-4A-8D-3D-97:AHSMwmD" NAS-Port-Type = Wireless-802.11 Service-Type = Framed-User Calling-Station-Id = "00-1E-C0-6C-FB-0B" Connect-Info = "CONNECT 54.00 Mbps, 802.11g, RSSI: 57, Channel: 1" Acct-Session-Id = "103A93CA9F945C99" Acct-Multi-Session-Id = "FB64B58512B66D42" WLAN-Pairwise-Cipher = 1027076 WLAN-Group-Cipher = 1027076 WLAN-AKM-Suite = 1027073 Vendor-29671-Attr-1 = 0x424357 Framed-MTU = 1400 EAP-Message = 0x025e004819800000003e160301003901000035030100000001fba380567c1ebcb1df89ceac8196cc7eb323e387590402db7ab573e3000008002f00050004000a0100000400230000 State = 0x7be386297abd9fa4fe9b40e370a4c69f Message-Authenticator = 0xe32dd642da8f3fa616bba44fe9c92c60 # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] No '@' in User-Name = "WATENOVAT01", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] = noop [eap] EAP packet type response id 94 length 72 [eap] Continuing tunnel setup. ++[eap] = ok +} # group authorize = ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +group authenticate { [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 62 [peap] Length Included [peap] eaptls_verify returned 11 [peap] (other): before/accept initialization [peap] TLS_accept: before/accept initialization [peap] <<< Unknown TLS version [length 0005] [peap] <<< TLS 1.0 Handshake [length 0039], ClientHello [peap] TLS_accept: unknown state [peap] >>> Unknown TLS version [length 0005] [peap] >>> TLS 1.0 Handshake [length 002a], ServerHello [peap] TLS_accept: unknown state [peap] >>> Unknown TLS version [length 0005] [peap] >>> TLS 1.0 Handshake [length 02c0], Certificate [peap] TLS_accept: unknown state [peap] >>> Unknown TLS version [length 0005] [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [peap] TLS_accept: unknown state [peap] TLS_accept: unknown state [peap] TLS_accept: unknown state [peap] TLS_accept: Need to read more data: unknown state [peap] TLS_accept: Need to read more data: unknown state In SSL Handshake Phase In SSL Accept mode [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] = handled +} # group authenticate = handled Sending Access-Challenge of id 93 to 10.10.128.122 port 47803 EAP-Message = 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 EAP-Message = 0xe3f5cb286a75bd28fd1d5bf806f91f252bd17974c0987e4e99447ee481fb2cafa44f633529d358a6933c9b7d1393914cede0d4211ba354d617223eb6a866833218a755dd49c6e4ad5be5a6f682bab73a3ef50e365b3f8cf67e34b34e69003d344ae86042629f844a96b4432d34a66a03337ac4b4337b42662f9ee72f6becc4402a002a970a6557a5b406146625ec45468f233dfb163dcfb064001cc1cf485562a2d1b28a6620d4fbe378d143dddfc8510ccceb0fb52e65f755b990bb83c4afd0a17a49119de609110848c1f40b1226406eb5785a790203010001a30d300b30090603551d1304023000300d06092a864886f70d01010b05000382010100 EAP-Message = 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 EAP-Message = 0x21948916030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x7be3862979bc9fa4fe9b40e370a4c69f Finished request 5. Going to the next request Waking up in 4.7 seconds. rad_recv: Access-Request packet from host 10.10.128.122 port 47803, id=94, length=255 User-Name = "WATENOVAT01" NAS-IP-Address = 10.10.128.122 Called-Station-Id = "02-18-4A-8D-3D-97:AHSMwmD" NAS-Port-Type = Wireless-802.11 Service-Type = Framed-User Calling-Station-Id = "00-1E-C0-6C-FB-0B" Connect-Info = "CONNECT 54.00 Mbps, 802.11g, RSSI: 56, Channel: 1" Acct-Session-Id = "507EF396989770A0" Acct-Multi-Session-Id = "855C17C049E9B30C" WLAN-Pairwise-Cipher = 1027076 WLAN-Group-Cipher = 1027076 WLAN-AKM-Suite = 1027073 Vendor-29671-Attr-1 = 0x424357 Framed-MTU = 1400 EAP-Message = 0x0202001001574154454e4f5641543031 Message-Authenticator = 0xb2f2618abdaaa322ddc3e0794b6aa836 # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] No '@' in User-Name = "WATENOVAT01", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] = noop [eap] EAP packet type response id 2 length 16 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] = updated [files] users: Matched entry WATENOVAT01 at line 1 ++[files] = ok ++[expiration] = noop ++[logintime] = noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] = noop +} # group authorize = updated Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +group authenticate { [eap] EAP Identity [eap] processing type md5 rlm_eap_md5: Issuing Challenge ++[eap] = handled +} # group authenticate = handled Sending Access-Challenge of id 94 to 10.10.128.122 port 47803 EAP-Message = 0x010300160410cc5f2922b7c1ce76a330bd8d921a8289 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x3eef75003eec71ccb9abaf49121ea830 Finished request 6. Going to the next request Waking up in 4.5 seconds. rad_recv: Access-Request packet from host 10.10.128.122 port 47803, id=95, length=263 User-Name = "WATENOVAT01" NAS-IP-Address = 10.10.128.122 Called-Station-Id = "02-18-4A-8D-3D-97:AHSMwmD" NAS-Port-Type = Wireless-802.11 Service-Type = Framed-User Calling-Station-Id = "00-1E-C0-6C-FB-0B" Connect-Info = "CONNECT 54.00 Mbps, 802.11g, RSSI: 57, Channel: 1" Acct-Session-Id = "507EF396989770A0" Acct-Multi-Session-Id = "855C17C049E9B30C" WLAN-Pairwise-Cipher = 1027076 WLAN-Group-Cipher = 1027076 WLAN-AKM-Suite = 1027073 Vendor-29671-Attr-1 = 0x424357 Framed-MTU = 1400 EAP-Message = 0x020300060319 State = 0x3eef75003eec71ccb9abaf49121ea830 Message-Authenticator = 0x50f73eb2f017a3fe5861008dd8401c8f # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] No '@' in User-Name = "WATENOVAT01", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] = noop [eap] EAP packet type response id 3 length 6 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] = updated [files] users: Matched entry WATENOVAT01 at line 1 ++[files] = ok ++[expiration] = noop ++[logintime] = noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] = noop +} # group authorize = updated Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +group authenticate { [eap] Request found, released from the list [eap] EAP NAK [eap] EAP-NAK asked for EAP-Type/peap [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] = handled +} # group authenticate = handled Sending Access-Challenge of id 95 to 10.10.128.122 port 47803 EAP-Message = 0x010400061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x3eef75003feb6cccb9abaf49121ea830 Finished request 7. Going to the next request Waking up in 4.5 seconds. rad_recv: Access-Request packet from host 10.10.128.122 port 47803, id=96, length=329 User-Name = "WATENOVAT01" NAS-IP-Address = 10.10.128.122 Called-Station-Id = "02-18-4A-8D-3D-97:AHSMwmD" NAS-Port-Type = Wireless-802.11 Service-Type = Framed-User Calling-Station-Id = "00-1E-C0-6C-FB-0B" Connect-Info = "CONNECT 54.00 Mbps, 802.11g, RSSI: 57, Channel: 1" Acct-Session-Id = "507EF396989770A0" Acct-Multi-Session-Id = "855C17C049E9B30C" WLAN-Pairwise-Cipher = 1027076 WLAN-Group-Cipher = 1027076 WLAN-AKM-Suite = 1027073 Vendor-29671-Attr-1 = 0x424357 Framed-MTU = 1400 EAP-Message = 0x0204004819800000003e1603010039010000350301000000015f888176d6a0110f2bfa55c0b9fd650cfc8f52c7dabc6c09f2e09958000008002f00050004000a0100000400230000 State = 0x3eef75003feb6cccb9abaf49121ea830 Message-Authenticator = 0xa8a43f2bdacc4bcae48ba8b5e794081f # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] No '@' in User-Name = "WATENOVAT01", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] = noop [eap] EAP packet type response id 4 length 72 [eap] Continuing tunnel setup. ++[eap] = ok +} # group authorize = ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +group authenticate { [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 62 [peap] Length Included [peap] eaptls_verify returned 11 [peap] (other): before/accept initialization [peap] TLS_accept: before/accept initialization [peap] <<< Unknown TLS version [length 0005] [peap] <<< TLS 1.0 Handshake [length 0039], ClientHello [peap] TLS_accept: unknown state [peap] >>> Unknown TLS version [length 0005] [peap] >>> TLS 1.0 Handshake [length 002a], ServerHello [peap] TLS_accept: unknown state [peap] >>> Unknown TLS version [length 0005] [peap] >>> TLS 1.0 Handshake [length 02c0], Certificate [peap] TLS_accept: unknown state [peap] >>> Unknown TLS version [length 0005] [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [peap] TLS_accept: unknown state [peap] TLS_accept: unknown state [peap] TLS_accept: unknown state [peap] TLS_accept: Need to read more data: unknown state [peap] TLS_accept: Need to read more data: unknown state In SSL Handshake Phase In SSL Accept mode [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] = handled +} # group authenticate = handled Sending Access-Challenge of id 96 to 10.10.128.122 port 47803 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x21948916030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x3eef75003cea6cccb9abaf49121ea830 Finished request 8. Going to the next request Waking up in 4.5 seconds. Cleaning up request 0 ID 88 with timestamp +98 Cleaning up request 1 ID 89 with timestamp +98 Cleaning up request 2 ID 90 with timestamp +98 WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0x7b85dc12795bc5c1 did not finish! WARNING: !! Please read http://wiki.freeradius.org/guide/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Waking up in 0.2 seconds. Cleaning up request 3 ID 91 with timestamp +99 Cleaning up request 4 ID 92 with timestamp +99 Cleaning up request 5 ID 93 with timestamp +99 WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0x7be3862979bc9fa4 did not finish! WARNING: !! Please read http://wiki.freeradius.org/guide/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Waking up in 0.1 seconds. Cleaning up request 6 ID 94 with timestamp +99 Cleaning up request 7 ID 95 with timestamp +99 Cleaning up request 8 ID 96 with timestamp +99 WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING: !! EAP session for state 0x3eef75003cea6ccc did not finish! WARNING: !! Please read http://wiki.freeradius.org/guide/Certificate_Compatibility WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Ready to process requests. ---END Ryan Sinclair IT Supervisor O: 615 896 1652 ext. 413 | F: 615 896 8906 ryan.sinclair(a)enovatemedical.com Enovate Medical | 1152 Park Avenue, Murfreesboro, TN 37129 | www.enovatemedical.com<http://www.enovatemedical.com/> [rhythm] Enjoy remote visibility of workstation location and usage, as well as battery forecasting, remote re-boot, and support ticket integration. To learn more, ask your Enovate Medical representative to schedule a Rhythm demo today.<http://www.enovatemedical.com/enovate-medical-introduces-rhythm/>

2 1

multiple roundtrips in session
by Alex Sharaz 10 Jul '18

10 Jul '18

Some of our eduroam users have for quite some time been using EAP-TLS on their edge devices Normally this "just works" and I've certainly used it from various european eduroam sites quite happily. A bit closer to home however, today one of our TLS users tried to connect at Leeds and our end generated the following errors. Mon Jul 9 11:17:10 2018 : Auth: (10991893) Login incorrect (eap: rlm_eap (EAP): Aborting! More than 50 roundtrips made in session with state 0x1235fc092001f154): [rw557(a)york.ac.uk] (from client roaming0.ja.net port 8 cli 8C-F5-A3-31-14-A8) Mon Jul 9 11:17:53 2018 : Auth: (10992567) Login incorrect (eap: rlm_eap (EAP): Aborting! More than 50 roundtrips made in session with state 0xcae72df7f8d32086): [rw557(a)york.ac.uk] (from client roaming0.ja.net port 8 cli 8C-F5-A3-31-14-A8) Mon Jul 9 11:18:37 2018 : Auth: (10993336) Login incorrect (eap: rlm_eap (EAP): Aborting! More than 50 roundtrips made in session with state 0xaca0155b9e94185b): [rw557(a)york.ac.uk] (from client roaming0.ja.net port 8 cli 8C-F5-A3-31-14-A8) Don't seem to have any more info (we're running 3.0.17) and as this is the 1st time I've seen this, not sure what to do to reproduce it. Don't really want to run server in debug mode just on the off-chance I might see something. Anything I can put in the config to generate some additional logs if it happens again ? Rgds A

2 2

Waking up in 999995.9 seconds.
by Duncan Carter 09 Jul '18

09 Jul '18

Afternoon all, We've got about 20 freeradius servers running for different customers, all have been happily running for months, the only config change I'm aware of is an additional interface on a new IP that's not currently in use. Last week, we started getting the following error coming up in the logs: Error: Dropping request (1025 is too many): from client admin port 58950 - ID: 81 ... We've been restarting radiusd to get the service working again, but I've had a chance to run radiusd in debug mode today, and this stands out in the log files: tail -f radiusd_-X_debug.log | grep Waking Waking up in 0.3 seconds. Waking up in 999994.6 seconds. Waking up in 1999991.9 seconds. Waking up in 0.3 seconds. Waking up in 4.6 seconds. Waking up in 3.9 seconds. Waking up in 999995.9 seconds. Waking up in 1999991.9 seconds. Waking up in 3997746.1 seconds. Looking at that, it's only a matter of time before the 1024 threads/max_requests are asleep. Can someone tell me why it's going to sleep for so long? Am I barking up the wrong tree? We've got other servers with far more clients and not having any problems with them. Many thanks in advance, Duncan.

2 1

User Group Name
by J E H A N Z A I B 09 Jul '18

09 Jul '18

Hi team, I am accessing username like %{SQL-User-Name} in the queries.conf does anyone know if I can access User group name? Thank you

2 2

"Known good" password
by Bernd Nachtigall 05 Jul '18

05 Jul '18

Hi, I try to setup a basic radius service. Use Version 3.0.3 Most files are untouched. Edit mods-config/files/authorize and added some user: testuser Cleartext-Password := "mypassword", Login-Time ="Any", Expiration >"Oct 01 2020", Simultanous-Use = 1 Service-Type = Framed-User, Framed-Protocol = PPP, Framed-IP-Address = 192.168.111.222, Framed-Routing = None, Filter-ID = USER Edit client.conf and added: client 192.168.1.5 { secret = clientpwd } radiusd starts w/o problem and the default test: # radtest testing password 127.0.0.1 0 testing123 is successfull. When try to test (from localhost): # radtest testuser mypassword 127.0.0.1 0 testing123 I think this is likely the same test as with the default user 'testing'. radius throw: ... WARNING: pap : No "known good" password found tor the user. Not setting Auth-Type. WARNING: pap : Authentication will faill unless a "known good" password is available. [pap] = noop } # authorize = ok ERROR: No Auth-Tape found: rejecting the user via Post-Auth-Type = Reject ... So my question is: What is an 'known good' password? Where should this be configured? TiA Bernd

4 6

No Session-Timeout in radtest
by Rob 05 Jul '18

05 Jul '18

I have enabled the sqlcounter module with only (standard) dailycounter enabled. When I do a radtest I get a an Access-Accept reply, but I expected a Session-Timeout included in the reply. I have added this user in mysql: | 18 | test | Cleartext-Password | := | 12345 | | 19 | test | Max-Daily-Session | := | 1800 radtest test 12345 127.0.0.1 18 testing123 FreeRADIUS Version 3.0.16 Copyright (C) 1999-2017 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/3.0/dictionary including configuration file /etc/freeradius/3.0/radiusd.conf including configuration file /etc/freeradius/3.0/proxy.conf including configuration file /etc/freeradius/3.0/clients.conf including files in directory /etc/freeradius/3.0/mods-enabled/ including configuration file /etc/freeradius/3.0/mods-enabled/eap including configuration file /etc/freeradius/3.0/mods-enabled/radutmp including configuration file /etc/freeradius/3.0/mods-enabled/utf8 including configuration file /etc/freeradius/3.0/mods-enabled/digest including configuration file /etc/freeradius/3.0/mods-enabled/pap including configuration file /etc/freeradius/3.0/mods-enabled/realm including configuration file /etc/freeradius/3.0/mods-enabled/sqlcounter including configuration file /etc/freeradius/3.0/mods-config/sql/counter/mysql/dailycounter.conf including configuration file /etc/freeradius/3.0/mods-enabled/unix including configuration file /etc/freeradius/3.0/mods-enabled/exec including configuration file /etc/freeradius/3.0/mods-enabled/detail including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap including configuration file /etc/freeradius/3.0/mods-enabled/soh including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp including configuration file /etc/freeradius/3.0/mods-enabled/always including configuration file /etc/freeradius/3.0/mods-enabled/linelog including configuration file /etc/freeradius/3.0/mods-enabled/sql including configuration file /etc/freeradius/3.0/mods-config/sql/main/mysql/queries.conf including configuration file /etc/freeradius/3.0/mods-enabled/echo including configuration file /etc/freeradius/3.0/mods-enabled/preprocess including configuration file /etc/freeradius/3.0/mods-enabled/detail.log including configuration file /etc/freeradius/3.0/mods-enabled/replicate including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth including configuration file /etc/freeradius/3.0/mods-enabled/passwd including configuration file /etc/freeradius/3.0/mods-enabled/chap including configuration file /etc/freeradius/3.0/mods-enabled/logintime including configuration file /etc/freeradius/3.0/mods-enabled/expr including configuration file /etc/freeradius/3.0/mods-enabled/files including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter including configuration file /etc/freeradius/3.0/mods-enabled/mschap including configuration file /etc/freeradius/3.0/mods-enabled/unpack including configuration file /etc/freeradius/3.0/mods-enabled/expiration including files in directory /etc/freeradius/3.0/policy.d/ including configuration file /etc/freeradius/3.0/policy.d/dhcp including configuration file /etc/freeradius/3.0/policy.d/abfab-tr including configuration file /etc/freeradius/3.0/policy.d/debug including configuration file /etc/freeradius/3.0/policy.d/accounting including configuration file /etc/freeradius/3.0/policy.d/eap including configuration file /etc/freeradius/3.0/policy.d/filter including configuration file /etc/freeradius/3.0/policy.d/canonicalization including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/3.0/policy.d/control including configuration file /etc/freeradius/3.0/policy.d/cui including configuration file /etc/freeradius/3.0/policy.d/operator-name including files in directory /etc/freeradius/3.0/sites-enabled/ including configuration file /etc/freeradius/3.0/sites-enabled/default including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client all { ipaddr = 0.0.0.0 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8 # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_sqlcounter # Loading module "dailycounter" from file /etc/freeradius/3.0/mods-enabled/sqlcounter sqlcounter dailycounter { sql_module_instance = "sql" key = "User-Name" query = "SELECT SUM(acctsessiontime - GREATEST((%%b - UNIX_TIMESTAMP(acctstarttime)), 0)) FROM radacct WHERE username = '%{User-Name}' AND UNIX_TIMESTAMP(acctstarttime) + acctsessiontime > '%%b'" reset = "daily" counter_name = "Daily-Session-Time" check_name = "Max-Daily-Session" reply_name = "Session-Timeout" } # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_exec # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_detail # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh soh { dhcp = yes } # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_sql # Loading module "sql" from file /etc/freeradius/3.0/mods-enabled/sql sql { driver = "rlm_sql_mysql" server = "localhost" port = 3306 login = "radius" password = <<< secret >>> radius_db = "radius" read_groups = yes read_profiles = yes read_clients = no delete_stale_sessions = yes sql_user_name = "%{User-Name}" default_user_profile = "" client_query = "SELECT id, nasname, shortname, type, secret, server FROM nas" authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id" authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id" group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority" simul_count_query = "SELECT COUNT(*) FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" accounting { reference = "%{tolower:type.%{Acct-Status-Type}.query}" type { accounting-on { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})" } accounting-off { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})" } start { query = "INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}', FROM_UNIXTIME(%{integer:Event-Timestamp}), FROM_UNIXTIME(%{integer:Event-Timestamp}), NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}')" } interim-update { query = "UPDATE radacct SET acctupdatetime = (@acctupdatetime_old:=acctupdatetime), acctupdatetime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctinterval = %{integer:Event-Timestamp} - UNIX_TIMESTAMP(@acctupdatetime_old), framedipaddress = '%{Framed-IP-Address}', acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'" } stop { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'" } } } post-auth { reference = ".query" query = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')" } } rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked Creating attribute SQL-Group # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/3.0/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files files { filename = "/etc/freeradius/3.0/mods-config/files/authorize" acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy" } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration instantiate { } # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/3.0/certs" pem_file_type = yes private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key" certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem" ca_file = "/etc/ssl/certs/ca-certificates.crt" private_key_password = <<< secret >>> dh_file = "/etc/freeradius/3.0/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" tls_max_version = "" tls_min_version = "1.0" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "dailycounter" from file /etc/freeradius/3.0/mods-enabled/sqlcounter rlm_sqlcounter: Current Time: 1530625024 [2018-07-03 13:37:04], Prev reset 1530576000 [2018-07-03 00:00:00] # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "sql" from file /etc/freeradius/3.0/mods-enabled/sql rlm_sql_mysql: libmysql version: 5.7.22 mysql { tls { } warnings = "auto" } rlm_sql (sql): Attempting to connect to database "radius" rlm_sql (sql): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_sql (sql): Opening additional connection (0), 1 of 32 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.7.22-0ubuntu18.04.1, protocol version 10 rlm_sql (sql): Opening additional connection (1), 1 of 31 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.7.22-0ubuntu18.04.1, protocol version 10 rlm_sql (sql): Opening additional connection (2), 1 of 30 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.7.22-0ubuntu18.04.1, protocol version 10 rlm_sql (sql): Opening additional connection (3), 1 of 29 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.7.22-0ubuntu18.04.1, protocol version 10 rlm_sql (sql): Opening additional connection (4), 1 of 28 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.7.22-0ubuntu18.04.1, protocol version 10 # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/3.0/radiusd.conf } # server server default { # from file /etc/freeradius/3.0/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/3.0/sites-enabled/inner-tunnel:331 } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on proxy address * port 53283 Listening on proxy address :: port 49427 Ready to process requests (0) Received Access-Request Id 209 from 127.0.0.1:57236 to 127.0.0.1:1812 length 74 (0) User-Name = "test" (0) User-Password = "12345" (0) NAS-IP-Address = 192.168.1.26 (0) NAS-Port = 18 (0) Message-Authenticator = 0xcd1b705cddbb22efcb91251631b97aa2 (0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "test", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: No EAP-Message, not doing EAP (0) [eap] = noop (0) [files] = noop (0) sql: EXPAND %{User-Name} (0) sql: --> test (0) sql: SQL-User-Name set to 'test' rlm_sql (sql): Reserved connection (0) (0) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id (0) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'test' ORDER BY id (0) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'test' ORDER BY id (0) sql: User found in radcheck table (0) sql: Conditional check items matched, merging assignment check items (0) sql: Cleartext-Password := "12345" (0) sql: Max-Daily-Session := 1800 (0) sql: EXPAND SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id (0) sql: --> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'test' ORDER BY id (0) sql: Executing select query: SELECT id, username, attribute, value, op FROM radreply WHERE username = 'test' ORDER BY id (0) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority (0) sql: --> SELECT groupname FROM radusergroup WHERE username = 'test' ORDER BY priority (0) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = 'test' ORDER BY priority (0) sql: User not found in any groups rlm_sql (sql): Released connection (0) Need 5 more connections to reach 10 spares rlm_sql (sql): Opening additional connection (5), 1 of 27 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.7.22-0ubuntu18.04.1, protocol version 10 (0) [sql] = ok (0) [expiration] = noop (0) [logintime] = noop (0) [pap] = updated (0) } # authorize = updated (0) Found Auth-Type = PAP (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) Auth-Type PAP { (0) pap: Login attempt with password (0) pap: Comparing with "known good" Cleartext-Password (0) pap: User authenticated successfully (0) [pap] = ok (0) } # Auth-Type PAP = ok (0) # Executing section post-auth from file /etc/freeradius/3.0/sites-enabled/default (0) post-auth { (0) update { (0) No attributes updated (0) } # update = noop (0) sql: EXPAND .query (0) sql: --> .query (0) sql: Using query template 'query' rlm_sql (sql): Reserved connection (1) (0) sql: EXPAND %{User-Name} (0) sql: --> test (0) sql: SQL-User-Name set to 'test' (0) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S') (0) sql: --> INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'test', '12345', 'Access-Accept', '2018-07-03 13:37:37') (0) sql: Executing query: INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'test', '12345', 'Access-Accept', '2018-07-03 13:37:37') (0) sql: SQL query returned: success (0) sql: 1 record(s) updated rlm_sql (sql): Released connection (1) (0) [sql] = ok (0) [exec] = noop (0) policy remove_reply_message_if_eap { (0) if (&reply:EAP-Message && &reply:Reply-Message) { (0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (0) else { (0) [noop] = noop (0) } # else = noop (0) } # policy remove_reply_message_if_eap = noop (0) } # post-auth = ok (0) Sent Access-Accept Id 209 from 127.0.0.1:1812 to 127.0.0.1:57236 length 0 (0) Finished request Waking up in 4.9 seconds. (0) Cleaning up request packet ID 209 with timestamp +33 Ready to process requests Rob

3 6

Reliably identify guest users/clients
by Nico Thomas 04 Jul '18

04 Jul '18

Hi, I'm working on a module which allows a WiFi network host to dynamically accept or deny guests when they login. Therefore, known Cleartext-Passwords (or guest account data in general) are not available when mod_authorize is called. As my first idea of setting Auth-Type accept isn't possible in combination with EAP, I'm currently using a predefined password independent from the user instead. Then, I try to identify known users later. This is necessary as the Access-Requests are typically retransmitted faster than the network host can decide whether to let a guest in or not. At the moment, only Calling-Station-Id and user name are used for identification, which I am not really happy with. So my question is: Are there other attributes available to a module in addition to the Calling-Station-Id, which could be used to identify a user/device (besides credentials)? Thanks in advance and regards, Nico

2 3