- Freeradius-Users - lists.freeradius.org

mysql change time in radcheck table
by JAHANZAIB SYED 02 Jul '18

02 Jul '18

I am using freeradius with mysql. Thousands of users account expiration is stored in radcheck table. Expiration value is as follows 29 Jul 2018 12:00:00 30 Jul 2018 12:00:00 I want to change only 12:00:00 to 00:00:00 (means date remains same for each user but time should change to 00:00:00) so that it will look alike 29 Jul 2018 00:00:00 30 Jul 2018 00:00:00 Regards, J <http:///>

2 2

Freeradius
by Javier Ruiz Escalante 30 Jun '18

30 Jun '18

> > Hello, > > My name is Javier Escalante, I have been asking questions here for a > couple of days, and I was as well asking in 2015. Revising the answers from > now and 2015, from Alan Dekok, one of the most active members of this > group, and I think the one who manages it, I have realized, that it is > useless to ask, you will always get the same bullshit from him, and he will > treat you like if you were an idiot, but you won't get a solution. He might > be very "intelligent", but he and his fellows are wasting time and energy, > and make us waste it as well (It is clear that they don't know about > Zen...) by answering in the way they answer. Instead, they and the ones > who made the wiki, should add the following video sent to me by Uchenna > Nebedum youtube.com/watch?v=-xws3eo2CAQ (Thanks Uchenna). Here, you will > find all what you won't get in this group in your whole life, because all > "these intelligent" people like Alan and fellows, think that we ask because > we already know. Don't you realize guys that if I knew what I ask, I'd be > having beers and not wasting my fucking time with you!!!?? > > > > After watching the video, you can configure your RADIUS in less than 30', > and you can stop wasting your time here. Uchenna also sent me a freeradius > book, which I can send to all who want it. > > My question is; what you guys (Alan and fellows who act like him) are you > doing here? What is your aim? don't you realize that you waste our time and > what you are doing is useless? > If your aim is helping, you are doing it veeeeeery bad. To answer what you > answer, and how you answer, you better close down this mailing list. > > And now, Alan, you can ban me another time. > > Have a nice day > > Best >

6 9

purpose of xp extensions
by d tbsky 29 Jun '18

29 Jun '18

Hi: for many years I just follow the document: create certificate with xp extensions and use group policy to deploy the CA. I never really understand what is. now I have several stupid questions: 1. is the "xp" extensions means windows xp or something? 2. is xp extensions only useful if we want client to verify server certificate? 3. if we use certificate like let's encrypt without xp extensions. what function do we miss? I know it is not very secure to use public CA, but it seems easier when deal with mobile devices bring by users. they just want to access wifi with their active directory username/password. thanks a lot for help!!

4 6

Unitary testing of virtual servers on a proxy RADIUS
by Nidhal Taleb 29 Jun '18

29 Jun '18

Hi all, with a subject line this time FreeRADIUS Version 3.0.15 here. We have a working freeradius server acting as a proxy for our customers. All customers go through the same clients pool. Clients as intended in /etc/freeradius/clients. For some new need we need to change the behavior of our server for a certain type of requests - an existing realm must now be processed locally by the server and not as a proxy -. I thought about implementing this through the use of virtual servers. It works well in our testing environment but it’s time to test it in production. The way I understand virtual servers is that they must be « declared » under the client configuration in the /etc/freeradius/clients file. The problem I am facing is that in doing so, I implement the change on all incoming authentication requests whereas I would have preferred to do so on a unique user just to be sure it would work in the production environment. Anyone has an idea? Thx Nidhal Taleb

2 2

Add calledstationid to postauth table
by Uchenna Nebedum 29 Jun '18

29 Jun '18

Good Day all, Please i want sql postauth to store calledstationid in radpostauth table, I've added the field but i don't know which file to edit to include the sql. Please any help would be appreciated. Thanks. Uchenna Nebedum

4 4

PEAP with LDAP Cleartext Password including backslash
by kaoru eto 29 Jun '18

29 Jun '18

Hi, All. I am in trouble with the following problem. Please help me. 1.What you are trying to do I need to use PEAP(MS-CHAPv2) with LDAP that has Cleartext-Password in userPassword attribute. 2.why you are trying to do it I am trying to use backslash in userPassword like 'Pass\100word'. 3.what you expect the server to do Access-Accept with password 'Pass\100word'. Access-Reject with password 'Pass@word'. 4.what the server does instead. Access-Reject with password 'Pass\100word'. Access-Accept with password 'Pass@word'. I assume that the 'value_data_from_str' function converts 'Pass\100word' to 'Pass@word'. I tried changing single backslash 'Pass\100word' to double backslash 'Pass\\100word' on the LDAP server, and got Access-Accept with password 'Pass\100word'. But, we hardly control this problem by changing the userPassword attribute rules of LDAP server, because other systems which we can not control use the same LDAP server. Is there any workaround in freeradius configurations? etokaoru The ldapsearch result is as follows: # ldapsearch -LLL -h 192.168.103.10 -b dc=home -D 'cn=root,dc=home' -w 'password' uid=user001 userPassword dn: uid=user001,ou=test,dc=home userPassword:: UGFzc1wxMDB3b3Jk # echo 'UGFzc1wxMDB3b3Jk' | base64 -d Pass\100word The debug log is as follows: FreeRADIUS Version 3.0.17 Copyright (C) 1999-2017 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/local/radius3017/share/freeradius/dictionary including dictionary file /usr/local/radius3017/share/freeradius/dictionary.dhcp including dictionary file /usr/local/radius3017/share/freeradius/dictionary.vqp including dictionary file /usr/local/radius3017/etc/raddb/dictionary including configuration file /usr/local/radius3017/etc/raddb/radiusd.conf including configuration file /usr/local/radius3017/etc/raddb/proxy.conf including configuration file /usr/local/radius3017/etc/raddb/clients.conf including files in directory /usr/local/radius3017/etc/raddb/mods-enabled/ including configuration file /usr/local/radius3017/etc/raddb/mods-enabled/echo including configuration file /usr/local/radius3017/etc/raddb/mods-enabled/utf8 including configuration file /usr/local/radius3017/etc/raddb/mods-enabled/cache_eap including configuration file /usr/local/radius3017/etc/raddb/mods-enabled/ldap including configuration file /usr/local/radius3017/etc/raddb/mods-enabled/digest including configuration file /usr/local/radius3017/etc/raddb/mods-enabled/unix including configuration file /usr/local/radius3017/etc/raddb/mods-enabled/attr_filter including configuration file /usr/local/radius3017/etc/raddb/mods-enabled/ntlm_auth including configuration file /usr/local/radius3017/etc/raddb/mods-enabled/detail including configuration file /usr/local/radius3017/etc/raddb/mods-enabled/linelog including configuration file /usr/local/radius3017/etc/raddb/mods-enabled/always including configuration file /usr/local/radius3017/etc/raddb/mods-enabled/expr including configuration file /usr/local/radius3017/etc/raddb/mods-enabled/sradutmp including configuration file /usr/local/radius3017/etc/raddb/mods-enabled/passwd including configuration file /usr/local/radius3017/etc/raddb/mods-enabled/exec including configuration file /usr/local/radius3017/etc/raddb/mods-enabled/pap including configuration file /usr/local/radius3017/etc/raddb/mods-enabled/detail.log including configuration file /usr/local/radius3017/etc/raddb/mods-enabled/expiration including configuration file /usr/local/radius3017/etc/raddb/mods-enabled/unpack including configuration file /usr/local/radius3017/etc/raddb/mods-enabled/preprocess including configuration file /usr/local/radius3017/etc/raddb/mods-enabled/radutmp including configuration file /usr/local/radius3017/etc/raddb/mods-enabled/replicate including configuration file /usr/local/radius3017/etc/raddb/mods-enabled/mschap including configuration file /usr/local/radius3017/etc/raddb/mods-enabled/dynamic_clients including configuration file /usr/local/radius3017/etc/raddb/mods-enabled/realm including configuration file /usr/local/radius3017/etc/raddb/mods-enabled/files including configuration file /usr/local/radius3017/etc/raddb/mods-enabled/eap including configuration file /usr/local/radius3017/etc/raddb/mods-enabled/soh including configuration file /usr/local/radius3017/etc/raddb/mods-enabled/date including configuration file /usr/local/radius3017/etc/raddb/mods-enabled/chap including configuration file /usr/local/radius3017/etc/raddb/mods-enabled/logintime including files in directory /usr/local/radius3017/etc/raddb/policy.d/ including configuration file /usr/local/radius3017/etc/raddb/policy.d/debug including configuration file /usr/local/radius3017/etc/raddb/policy.d/abfab-tr including configuration file /usr/local/radius3017/etc/raddb/policy.d/dhcp including configuration file /usr/local/radius3017/etc/raddb/policy.d/operator-name including configuration file /usr/local/radius3017/etc/raddb/policy.d/control including configuration file /usr/local/radius3017/etc/raddb/policy.d/filter including configuration file /usr/local/radius3017/etc/raddb/policy.d/canonicalization including configuration file /usr/local/radius3017/etc/raddb/policy.d/moonshot-targeted-ids including configuration file /usr/local/radius3017/etc/raddb/policy.d/cui including configuration file /usr/local/radius3017/etc/raddb/policy.d/eap including configuration file /usr/local/radius3017/etc/raddb/policy.d/accounting including files in directory /usr/local/radius3017/etc/raddb/sites-enabled/ including configuration file /usr/local/radius3017/etc/raddb/sites-enabled/default including configuration file /usr/local/radius3017/etc/raddb/sites-enabled/inner-tunnel main { security { allow_core_dumps = no } name = "radiusd" prefix = "/usr/local/radius3017" localstatedir = "/usr/local/radius3017/var" logdir = "/usr/local/radius3017/var/log/radius" run_dir = "/usr/local/radius3017/var/run/radiusd" } main { name = "radiusd" prefix = "/usr/local/radius3017" localstatedir = "/usr/local/radius3017/var" sbindir = "/usr/local/radius3017/sbin" logdir = "/usr/local/radius3017/var/log/radius" run_dir = "/usr/local/radius3017/var/run/radiusd" libdir = "/usr/local/radius3017/lib" radacctdir = "/usr/local/radius3017/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/usr/local/radius3017/var/run/radiusd/radiusd.pid" checkrad = "/usr/local/radius3017/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = yes auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes allow_vulnerable_openssl = "yes" } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client all-network { ipaddr = 0.0.0.0/0 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_exec # Loading module "echo" from file /usr/local/radius3017/etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_utf8 # Loading module "utf8" from file /usr/local/radius3017/etc/raddb/mods-enabled/utf8 # Loaded module rlm_cache # Loading module "cache_eap" from file /usr/local/radius3017/etc/raddb/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_ldap # Loading module "ldap" from file /usr/local/radius3017/etc/raddb/mods-enabled/ldap ldap { server = "192.168.103.10" identity = "cn=root,dc=home" password = <<< secret >>> sasl { } user { scope = "sub" access_positive = yes sasl { } } group { filter = "(objectClass=posixGroup)" scope = "sub" name_attribute = "cn" membership_attribute = "memberOf" cacheable_name = no cacheable_dn = no } client { filter = "(objectClass=radiusClient)" scope = "sub" base_dn = "dc=home" } profile { } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 1 res_timeout = 10 srv_timelimit = 3 idle = 60 probes = 3 interval = 3 } tls { start_tls = no } } Creating attribute LDAP-Group # Loaded module rlm_digest # Loading module "digest" from file /usr/local/radius3017/etc/raddb/mods-enabled/digest # Loaded module rlm_unix # Loading module "unix" from file /usr/local/radius3017/etc/raddb/mods-enabled/unix unix { radwtmp = "/usr/local/radius3017/var/log/radius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /usr/local/radius3017/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/usr/local/radius3017/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /usr/local/radius3017/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/usr/local/radius3017/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /usr/local/radius3017/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/usr/local/radius3017/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /usr/local/radius3017/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/usr/local/radius3017/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /usr/local/radius3017/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/usr/local/radius3017/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loading module "ntlm_auth" from file /usr/local/radius3017/etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_detail # Loading module "detail" from file /usr/local/radius3017/etc/raddb/mods-enabled/detail detail { filename = "/usr/local/radius3017/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_linelog # Loading module "linelog" from file /usr/local/radius3017/etc/raddb/mods-enabled/linelog linelog { filename = "/usr/local/radius3017/var/log/radius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /usr/local/radius3017/etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/usr/local/radius3017/var/log/radius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_always # Loading module "reject" from file /usr/local/radius3017/etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /usr/local/radius3017/etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /usr/local/radius3017/etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /usr/local/radius3017/etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /usr/local/radius3017/etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /usr/local/radius3017/etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /usr/local/radius3017/etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /usr/local/radius3017/etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /usr/local/radius3017/etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_expr # Loading module "expr" from file /usr/local/radius3017/etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_radutmp # Loading module "sradutmp" from file /usr/local/radius3017/etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/usr/local/radius3017/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /usr/local/radius3017/etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loading module "exec" from file /usr/local/radius3017/etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_pap # Loading module "pap" from file /usr/local/radius3017/etc/raddb/mods-enabled/pap pap { normalise = yes } # Loading module "auth_log" from file /usr/local/radius3017/etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/usr/local/radius3017/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /usr/local/radius3017/etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/usr/local/radius3017/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /usr/local/radius3017/etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/usr/local/radius3017/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /usr/local/radius3017/etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/usr/local/radius3017/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_expiration # Loading module "expiration" from file /usr/local/radius3017/etc/raddb/mods-enabled/expiration # Loaded module rlm_unpack # Loading module "unpack" from file /usr/local/radius3017/etc/raddb/mods-enabled/unpack # Loaded module rlm_preprocess # Loading module "preprocess" from file /usr/local/radius3017/etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/usr/local/radius3017/etc/raddb/mods-config/preprocess/huntgroups" hints = "/usr/local/radius3017/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loading module "radutmp" from file /usr/local/radius3017/etc/raddb/mods-enabled/radutmp radutmp { filename = "/usr/local/radius3017/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_replicate # Loading module "replicate" from file /usr/local/radius3017/etc/raddb/mods-enabled/replicate # Loaded module rlm_mschap # Loading module "mschap" from file /usr/local/radius3017/etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /usr/local/radius3017/etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_realm # Loading module "IPASS" from file /usr/local/radius3017/etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /usr/local/radius3017/etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /usr/local/radius3017/etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /usr/local/radius3017/etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_files # Loading module "files" from file /usr/local/radius3017/etc/raddb/mods-enabled/files files { filename = "/usr/local/radius3017/etc/raddb/mods-config/files/authorize" acctusersfile = "/usr/local/radius3017/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/usr/local/radius3017/etc/raddb/mods-config/files/pre-proxy" } # Loaded module rlm_eap # Loading module "eap" from file /usr/local/radius3017/etc/raddb/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_soh # Loading module "soh" from file /usr/local/radius3017/etc/raddb/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_date # Loading module "date" from file /usr/local/radius3017/etc/raddb/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" utc = no } # Loaded module rlm_chap # Loading module "chap" from file /usr/local/radius3017/etc/raddb/mods-enabled/chap # Loaded module rlm_logintime # Loading module "logintime" from file /usr/local/radius3017/etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } instantiate { } # Instantiating module "cache_eap" from file /usr/local/radius3017/etc/raddb/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "ldap" from file /usr/local/radius3017/etc/raddb/mods-enabled/ldap rlm_ldap: libldap vendor: OpenLDAP, version: 20423 accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } rlm_ldap (ldap): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldap://192.168.103.10:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots used rlm_ldap (ldap): Connecting to ldap://192.168.103.10:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots used rlm_ldap (ldap): Connecting to ldap://192.168.103.10:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots used rlm_ldap (ldap): Connecting to ldap://192.168.103.10:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots used rlm_ldap (ldap): Connecting to ldap://192.168.103.10:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful # Instantiating module "attr_filter.post-proxy" from file /usr/local/radius3017/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/radius3017/etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /usr/local/radius3017/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/radius3017/etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /usr/local/radius3017/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/radius3017/etc/raddb/mods-config/attr_filter/access_reject [/usr/local/radius3017/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/usr/local/radius3017/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /usr/local/radius3017/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/radius3017/etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /usr/local/radius3017/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/radius3017/etc/raddb/mods-config/attr_filter/accounting_response # Instantiating module "detail" from file /usr/local/radius3017/etc/raddb/mods-enabled/detail # Instantiating module "linelog" from file /usr/local/radius3017/etc/raddb/mods-enabled/linelog # Instantiating module "log_accounting" from file /usr/local/radius3017/etc/raddb/mods-enabled/linelog # Instantiating module "reject" from file /usr/local/radius3017/etc/raddb/mods-enabled/always # Instantiating module "fail" from file /usr/local/radius3017/etc/raddb/mods-enabled/always # Instantiating module "ok" from file /usr/local/radius3017/etc/raddb/mods-enabled/always # Instantiating module "handled" from file /usr/local/radius3017/etc/raddb/mods-enabled/always # Instantiating module "invalid" from file /usr/local/radius3017/etc/raddb/mods-enabled/always # Instantiating module "userlock" from file /usr/local/radius3017/etc/raddb/mods-enabled/always # Instantiating module "notfound" from file /usr/local/radius3017/etc/raddb/mods-enabled/always # Instantiating module "noop" from file /usr/local/radius3017/etc/raddb/mods-enabled/always # Instantiating module "updated" from file /usr/local/radius3017/etc/raddb/mods-enabled/always # Instantiating module "etc_passwd" from file /usr/local/radius3017/etc/raddb/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "pap" from file /usr/local/radius3017/etc/raddb/mods-enabled/pap # Instantiating module "auth_log" from file /usr/local/radius3017/etc/raddb/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /usr/local/radius3017/etc/raddb/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /usr/local/radius3017/etc/raddb/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /usr/local/radius3017/etc/raddb/mods-enabled/detail.log # Instantiating module "expiration" from file /usr/local/radius3017/etc/raddb/mods-enabled/expiration # Instantiating module "preprocess" from file /usr/local/radius3017/etc/raddb/mods-enabled/preprocess reading pairlist file /usr/local/radius3017/etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /usr/local/radius3017/etc/raddb/mods-config/preprocess/hints # Instantiating module "mschap" from file /usr/local/radius3017/etc/raddb/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "IPASS" from file /usr/local/radius3017/etc/raddb/mods-enabled/realm # Instantiating module "suffix" from file /usr/local/radius3017/etc/raddb/mods-enabled/realm # Instantiating module "realmpercent" from file /usr/local/radius3017/etc/raddb/mods-enabled/realm # Instantiating module "ntdomain" from file /usr/local/radius3017/etc/raddb/mods-enabled/realm # Instantiating module "files" from file /usr/local/radius3017/etc/raddb/mods-enabled/files reading pairlist file /usr/local/radius3017/etc/raddb/mods-config/files/authorize reading pairlist file /usr/local/radius3017/etc/raddb/mods-config/files/accounting reading pairlist file /usr/local/radius3017/etc/raddb/mods-config/files/pre-proxy # Instantiating module "eap" from file /usr/local/radius3017/etc/raddb/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/usr/local/radius3017/etc/raddb/certs" pem_file_type = yes private_key_file = "/usr/local/radius3017/etc/raddb/certs/server.pem" certificate_file = "/usr/local/radius3017/etc/raddb/certs/server.pem" ca_file = "/usr/local/radius3017/etc/raddb/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/usr/local/radius3017/etc/raddb/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" tls_max_version = "" tls_min_version = "1.0" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "logintime" from file /usr/local/radius3017/etc/raddb/mods-enabled/logintime } # modules radiusd: #### Loading Virtual Servers #### server { # from file /usr/local/radius3017/etc/raddb/radiusd.conf } # server server default { # from file /usr/local/radius3017/etc/raddb/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default server inner-tunnel { # from file /usr/local/radius3017/etc/raddb/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /usr/local/radius3017/etc/raddb/sites-enabled/inner-tunnel:331 } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on proxy address * port 42628 Listening on proxy address :: port 45142 Ready to process requests ## Authenticate with password 'Pass\100word'. (0) Received Access-Request Id 0 from 192.168.103.4:47841 to 192.168.103.2:1812 length 122 (0) User-Name = "user001" (0) NAS-IP-Address = 127.0.0.1 (0) Calling-Station-Id = "02-00-00-00-00-01" (0) Framed-MTU = 1400 (0) NAS-Port-Type = Wireless-802.11 (0) Connect-Info = "CONNECT 11Mbps 802.11b" (0) EAP-Message = 0x0200000c0175736572303031 (0) Message-Authenticator = 0x679feba3c9f1773e472f5380ddc76888 (0) # Executing section authorize from file /usr/local/radius3017/etc/raddb/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "user001", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 0 length 12 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /usr/local/radius3017/etc/raddb/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_md5 to process data (0) eap_md5: Issuing MD5 Challenge (0) eap: Sending EAP Request (code 1) ID 1 length 22 (0) eap: EAP session adding &reply:State = 0x186a0e6c186b0ac5 (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) # Executing group from file /usr/local/radius3017/etc/raddb/sites-enabled/default (0) Challenge { ... } # empty sub-section is ignored (0) Sent Access-Challenge Id 0 from 192.168.103.2:1812 to 192.168.103.4:47841 length 0 (0) EAP-Message = 0x01010016041045887b14d825549ee44bd88d1f95b6b5 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0x186a0e6c186b0ac57984571c96feda45 (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 1 from 192.168.103.4:47841 to 192.168.103.2:1812 length 134 (1) User-Name = "user001" (1) NAS-IP-Address = 127.0.0.1 (1) Calling-Station-Id = "02-00-00-00-00-01" (1) Framed-MTU = 1400 (1) NAS-Port-Type = Wireless-802.11 (1) Connect-Info = "CONNECT 11Mbps 802.11b" (1) EAP-Message = 0x020100060319 (1) State = 0x186a0e6c186b0ac57984571c96feda45 (1) Message-Authenticator = 0x7c61e54373c633326aaa4b2189df56cd (1) session-state: No cached attributes (1) # Executing section authorize from file /usr/local/radius3017/etc/raddb/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /(a)\./) { (1) if (&User-Name =~ /(a)\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "user001", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 1 length 6 (1) eap: No EAP Start, assuming it's an on-going EAP conversation (1) [eap] = updated (1) [files] = noop rlm_ldap (ldap): Reserved connection (0) (1) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (1) ldap: --> (uid=user001) (1) ldap: Performing search in "dc=home" with filter "(uid=user001)", scope "sub" (1) ldap: Waiting for search result... (1) ldap: User object found at DN "uid=user001,ou=test,dc=home" (1) ldap: Processing user attributes (1) ldap: control:Password-With-Header += 'Pass@word' rlm_ldap (ldap): Released connection (0) Need 5 more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots used rlm_ldap (ldap): Connecting to ldap://192.168.103.10:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (1) [ldap] = updated (1) [expiration] = noop (1) [logintime] = noop (1) pap: No {...} in Password-With-Header, re-writing to Cleartext-Password (1) pap: Removing &control:Password-With-Header (1) pap: WARNING: Auth-Type already set. Not setting to PAP (1) [pap] = noop (1) } # authorize = updated (1) Found Auth-Type = eap (1) # Executing group from file /usr/local/radius3017/etc/raddb/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0x186a0e6c186b0ac5 (1) eap: Finished EAP session with state 0x186a0e6c186b0ac5 (1) eap: Previous EAP request found for state 0x186a0e6c186b0ac5, released from the list (1) eap: Peer sent packet with method EAP NAK (3) (1) eap: Found mutually acceptable type PEAP (25) (1) eap: Calling submodule eap_peap to process data (1) eap_peap: Initiating new EAP-TLS session (1) eap_peap: [eaptls start] = request (1) eap: Sending EAP Request (code 1) ID 2 length 6 (1) eap: EAP session adding &reply:State = 0x186a0e6c196817c5 (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) # Executing group from file /usr/local/radius3017/etc/raddb/sites-enabled/default (1) Challenge { ... } # empty sub-section is ignored (1) Sent Access-Challenge Id 1 from 192.168.103.2:1812 to 192.168.103.4:47841 length 0 (1) EAP-Message = 0x010200061920 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0x186a0e6c196817c57984571c96feda45 (1) Finished request Waking up in 4.9 seconds. (2) Received Access-Request Id 2 from 192.168.103.4:47841 to 192.168.103.2:1812 length 293 (2) User-Name = "user001" (2) NAS-IP-Address = 127.0.0.1 (2) Calling-Station-Id = "02-00-00-00-00-01" (2) Framed-MTU = 1400 (2) NAS-Port-Type = Wireless-802.11 (2) Connect-Info = "CONNECT 11Mbps 802.11b" (2) EAP-Message = 0x020200a519800000009b16030100960100009203015b332b6ca88c248054ee38ab8df7b827fb3a34b8a0236ae99fea798591e5038500004cc014c00a0039003800880087c00fc00500350084c013c00900330032009a009900450044c00ec004002f00960041c012c00800160013c00dc003000a0007c0 (2) State = 0x186a0e6c196817c57984571c96feda45 (2) Message-Authenticator = 0x7d8c5566000064c3fac8d37999172605 (2) session-state: No cached attributes (2) # Executing section authorize from file /usr/local/radius3017/etc/raddb/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /(a)\./) { (2) if (&User-Name =~ /(a)\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "user001", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 2 length 165 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = eap (2) # Executing group from file /usr/local/radius3017/etc/raddb/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0x186a0e6c196817c5 (2) eap: Finished EAP session with state 0x186a0e6c196817c5 (2) eap: Previous EAP request found for state 0x186a0e6c196817c5, released from the list (2) eap: Peer sent packet with method EAP PEAP (25) (2) eap: Calling submodule eap_peap to process data (2) eap_peap: Continuing EAP-TLS (2) eap_peap: Peer indicated complete TLS record size will be 155 bytes (2) eap_peap: Got complete TLS record (155 bytes) (2) eap_peap: [eaptls verify] = length included (2) eap_peap: (other): before/accept initialization (2) eap_peap: TLS_accept: before/accept initialization (2) eap_peap: <<< recv TLS 1.0 Handshake [length 0096], ClientHello (2) eap_peap: TLS_accept: SSLv3 read client hello A (2) eap_peap: >>> send TLS 1.0 Handshake [length 003e], ServerHello (2) eap_peap: TLS_accept: SSLv3 write server hello A (2) eap_peap: >>> send TLS 1.0 Handshake [length 08d3], Certificate (2) eap_peap: TLS_accept: SSLv3 write certificate A (2) eap_peap: >>> send TLS 1.0 Handshake [length 014b], ServerKeyExchange (2) eap_peap: TLS_accept: SSLv3 write key exchange A (2) eap_peap: >>> send TLS 1.0 Handshake [length 0004], ServerHelloDone (2) eap_peap: TLS_accept: SSLv3 write server done A (2) eap_peap: TLS_accept: SSLv3 flush data (2) eap_peap: TLS_accept: Need to read more data: SSLv3 read client certificate A (2) eap_peap: TLS_accept: Need to read more data: SSLv3 read client certificate A (2) eap_peap: In SSL Handshake Phase (2) eap_peap: In SSL Accept mode (2) eap_peap: [eaptls process] = handled (2) eap: Sending EAP Request (code 1) ID 3 length 1004 (2) eap: EAP session adding &reply:State = 0x186a0e6c1a6917c5 (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) # Executing group from file /usr/local/radius3017/etc/raddb/sites-enabled/default (2) Challenge { ... } # empty sub-section is ignored (2) Sent Access-Challenge Id 2 from 192.168.103.2:1812 to 192.168.103.4:47841 length 0 (2) EAP-Message = 0x010303ec19c000000a74160301003e0200003a03015b32acf865a5f239f3eece59da89ebaca7fea51eb6919222d992ba7dc894750100c014000012ff01000100000b000403000102000f00010116030108d30b0008cf0008cc0003de308203da308202c2a003020102020101300d06092a864886f70d01 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0x186a0e6c1a6917c57984571c96feda45 (2) Finished request Waking up in 4.9 seconds. (3) Received Access-Request Id 3 from 192.168.103.4:47841 to 192.168.103.2:1812 length 134 (3) User-Name = "user001" (3) NAS-IP-Address = 127.0.0.1 (3) Calling-Station-Id = "02-00-00-00-00-01" (3) Framed-MTU = 1400 (3) NAS-Port-Type = Wireless-802.11 (3) Connect-Info = "CONNECT 11Mbps 802.11b" (3) EAP-Message = 0x020300061900 (3) State = 0x186a0e6c1a6917c57984571c96feda45 (3) Message-Authenticator = 0x9fa5df54eaf49871f860b5eb19e5b0c0 (3) session-state: No cached attributes (3) # Executing section authorize from file /usr/local/radius3017/etc/raddb/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /(a)\./) { (3) if (&User-Name =~ /(a)\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "user001", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 3 length 6 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /usr/local/radius3017/etc/raddb/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0x186a0e6c1a6917c5 (3) eap: Finished EAP session with state 0x186a0e6c1a6917c5 (3) eap: Previous EAP request found for state 0x186a0e6c1a6917c5, released from the list (3) eap: Peer sent packet with method EAP PEAP (25) (3) eap: Calling submodule eap_peap to process data (3) eap_peap: Continuing EAP-TLS (3) eap_peap: Peer ACKed our handshake fragment (3) eap_peap: [eaptls verify] = request (3) eap_peap: [eaptls process] = handled (3) eap: Sending EAP Request (code 1) ID 4 length 1000 (3) eap: EAP session adding &reply:State = 0x186a0e6c1b6e17c5 (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) # Executing group from file /usr/local/radius3017/etc/raddb/sites-enabled/default (3) Challenge { ... } # empty sub-section is ignored (3) Sent Access-Challenge Id 3 from 192.168.103.2:1812 to 192.168.103.4:47841 length 0 (3) EAP-Message = 0x010403e81940d3231b0bfa48b450b8c89f0432a23a5ac5d3f6b7f19378f4901279ac237212a82650f14d833aed8e1adce602b8c6de097685d288edf92cdf406d49f25ef4d291c474d5c1a6ffbe64fae1ef6197d30004e8308204e4308203cca003020102020900c762d342c4805c0e300d06092a864886 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0x186a0e6c1b6e17c57984571c96feda45 (3) Finished request Waking up in 4.9 seconds. (4) Received Access-Request Id 4 from 192.168.103.4:47841 to 192.168.103.2:1812 length 134 (4) User-Name = "user001" (4) NAS-IP-Address = 127.0.0.1 (4) Calling-Station-Id = "02-00-00-00-00-01" (4) Framed-MTU = 1400 (4) NAS-Port-Type = Wireless-802.11 (4) Connect-Info = "CONNECT 11Mbps 802.11b" (4) EAP-Message = 0x020400061900 (4) State = 0x186a0e6c1b6e17c57984571c96feda45 (4) Message-Authenticator = 0x6736403f7baedf92e695977f1d1a2f92 (4) session-state: No cached attributes (4) # Executing section authorize from file /usr/local/radius3017/etc/raddb/sites-enabled/default (4) authorize { (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /(a)\./) { (4) if (&User-Name =~ /(a)\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "user001", looking up realm NULL (4) suffix: No such realm "NULL" (4) [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 4 length 6 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /usr/local/radius3017/etc/raddb/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0x186a0e6c1b6e17c5 (4) eap: Finished EAP session with state 0x186a0e6c1b6e17c5 (4) eap: Previous EAP request found for state 0x186a0e6c1b6e17c5, released from the list (4) eap: Peer sent packet with method EAP PEAP (25) (4) eap: Calling submodule eap_peap to process data (4) eap_peap: Continuing EAP-TLS (4) eap_peap: Peer ACKed our handshake fragment (4) eap_peap: [eaptls verify] = request (4) eap_peap: [eaptls process] = handled (4) eap: Sending EAP Request (code 1) ID 5 length 694 (4) eap: EAP session adding &reply:State = 0x186a0e6c1c6f17c5 (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) # Executing group from file /usr/local/radius3017/etc/raddb/sites-enabled/default (4) Challenge { ... } # empty sub-section is ignored (4) Sent Access-Challenge Id 4 from 192.168.103.2:1812 to 192.168.103.4:47841 length 0 (4) EAP-Message = 0x010502b61900130101ff040530030101ff30360603551d1f042f302d302ba029a0278625687474703a2f2f7777772e6578616d706c652e6f72672f6578616d706c655f63612e63726c300d06092a864886f70d0101050500038201010092d400531c09e1c44c689f11afbb4bc09bf6857fc4464ea15c59 (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0x186a0e6c1c6f17c57984571c96feda45 (4) Finished request Waking up in 4.9 seconds. (5) Received Access-Request Id 5 from 192.168.103.4:47841 to 192.168.103.2:1812 length 272 (5) User-Name = "user001" (5) NAS-IP-Address = 127.0.0.1 (5) Calling-Station-Id = "02-00-00-00-00-01" (5) Framed-MTU = 1400 (5) NAS-Port-Type = Wireless-802.11 (5) Connect-Info = "CONNECT 11Mbps 802.11b" (5) EAP-Message = 0x0205009019800000008616030100461000004241047e89a09aa9195eee65203d4a9bf38f14b514bab3ba7aae5104f80d3f77b2f4d1524dc06e814cc1b1d28922949f737238c870cdf694b9b42a63156e4e74685d83140301000101160301003027b746221e24aed1f5ba0515fb310d8d6f6bcb1b3e3da8 (5) State = 0x186a0e6c1c6f17c57984571c96feda45 (5) Message-Authenticator = 0x6d56a055ede3b3bfc8800ad39ab8a935 (5) session-state: No cached attributes (5) # Executing section authorize from file /usr/local/radius3017/etc/raddb/sites-enabled/default (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /(a)\./) { (5) if (&User-Name =~ /(a)\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) [chap] = noop (5) [mschap] = noop (5) [digest] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "user001", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) eap: Peer sent EAP Response (code 2) ID 5 length 144 (5) eap: Continuing tunnel setup (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /usr/local/radius3017/etc/raddb/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0x186a0e6c1c6f17c5 (5) eap: Finished EAP session with state 0x186a0e6c1c6f17c5 (5) eap: Previous EAP request found for state 0x186a0e6c1c6f17c5, released from the list (5) eap: Peer sent packet with method EAP PEAP (25) (5) eap: Calling submodule eap_peap to process data (5) eap_peap: Continuing EAP-TLS (5) eap_peap: Peer indicated complete TLS record size will be 134 bytes (5) eap_peap: Got complete TLS record (134 bytes) (5) eap_peap: [eaptls verify] = length included (5) eap_peap: <<< recv TLS 1.0 Handshake [length 0046], ClientKeyExchange (5) eap_peap: TLS_accept: SSLv3 read client key exchange A (5) eap_peap: <<< recv TLS 1.0 ChangeCipherSpec [length 0001] (5) eap_peap: <<< recv TLS 1.0 Handshake [length 0010], Finished (5) eap_peap: TLS_accept: SSLv3 read finished A (5) eap_peap: >>> send TLS 1.0 ChangeCipherSpec [length 0001] (5) eap_peap: TLS_accept: SSLv3 write change cipher spec A (5) eap_peap: >>> send TLS 1.0 Handshake [length 0010], Finished (5) eap_peap: TLS_accept: SSLv3 write finished A (5) eap_peap: TLS_accept: SSLv3 flush data (5) eap_peap: (other): SSL negotiation finished successfully (5) eap_peap: SSL Connection Established (5) eap_peap: [eaptls process] = handled (5) eap: Sending EAP Request (code 1) ID 6 length 65 (5) eap: EAP session adding &reply:State = 0x186a0e6c1d6c17c5 (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) # Executing group from file /usr/local/radius3017/etc/raddb/sites-enabled/default (5) Challenge { ... } # empty sub-section is ignored (5) Sent Access-Challenge Id 5 from 192.168.103.2:1812 to 192.168.103.4:47841 length 0 (5) EAP-Message = 0x0106004119001403010001011603010030b75756ba563254cec0a03c450c676171d90fa3f50211a2f912759605e739ce90d5ec9f2d794ed3f7db091b481261820c (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0x186a0e6c1d6c17c57984571c96feda45 (5) Finished request Waking up in 4.9 seconds. (6) Received Access-Request Id 6 from 192.168.103.4:47841 to 192.168.103.2:1812 length 134 (6) User-Name = "user001" (6) NAS-IP-Address = 127.0.0.1 (6) Calling-Station-Id = "02-00-00-00-00-01" (6) Framed-MTU = 1400 (6) NAS-Port-Type = Wireless-802.11 (6) Connect-Info = "CONNECT 11Mbps 802.11b" (6) EAP-Message = 0x020600061900 (6) State = 0x186a0e6c1d6c17c57984571c96feda45 (6) Message-Authenticator = 0xbb380f836baa8c893f1e7216c5e7f068 (6) session-state: No cached attributes (6) # Executing section authorize from file /usr/local/radius3017/etc/raddb/sites-enabled/default (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /(a)\./) { (6) if (&User-Name =~ /(a)\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [preprocess] = ok (6) [chap] = noop (6) [mschap] = noop (6) [digest] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "user001", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) eap: Peer sent EAP Response (code 2) ID 6 length 6 (6) eap: Continuing tunnel setup (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /usr/local/radius3017/etc/raddb/sites-enabled/default (6) authenticate { (6) eap: Expiring EAP session with state 0x186a0e6c1d6c17c5 (6) eap: Finished EAP session with state 0x186a0e6c1d6c17c5 (6) eap: Previous EAP request found for state 0x186a0e6c1d6c17c5, released from the list (6) eap: Peer sent packet with method EAP PEAP (25) (6) eap: Calling submodule eap_peap to process data (6) eap_peap: Continuing EAP-TLS (6) eap_peap: Peer ACKed our handshake fragment. handshake is finished (6) eap_peap: [eaptls verify] = success (6) eap_peap: [eaptls process] = success (6) eap_peap: Session established. Decoding tunneled attributes (6) eap_peap: PEAP state TUNNEL ESTABLISHED (6) eap: Sending EAP Request (code 1) ID 7 length 43 (6) eap: EAP session adding &reply:State = 0x186a0e6c1e6d17c5 (6) [eap] = handled (6) } # authenticate = handled (6) Using Post-Auth-Type Challenge (6) # Executing group from file /usr/local/radius3017/etc/raddb/sites-enabled/default (6) Challenge { ... } # empty sub-section is ignored (6) Sent Access-Challenge Id 6 from 192.168.103.2:1812 to 192.168.103.4:47841 length 0 (6) EAP-Message = 0x0107002b19001703010020bd2d0af72124240767092f71860daa342d5ef6b0050425e5f8f127bf43b2405f (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0x186a0e6c1e6d17c57984571c96feda45 (6) Finished request Waking up in 4.9 seconds. (7) Received Access-Request Id 7 from 192.168.103.4:47841 to 192.168.103.2:1812 length 208 (7) User-Name = "user001" (7) NAS-IP-Address = 127.0.0.1 (7) Calling-Station-Id = "02-00-00-00-00-01" (7) Framed-MTU = 1400 (7) NAS-Port-Type = Wireless-802.11 (7) Connect-Info = "CONNECT 11Mbps 802.11b" (7) EAP-Message = 0x02070050190017030100202b5937f4b944b27f59ca2e4cacf6b1f450f7e2e0baa25f318004586c3cff33a31703010020f91fb26e67e589842c4890663b5061fe23583fec56db5edf9b17d56634cfd978 (7) State = 0x186a0e6c1e6d17c57984571c96feda45 (7) Message-Authenticator = 0xcb5902be23698745e6d3cd0a9387206c (7) session-state: No cached attributes (7) # Executing section authorize from file /usr/local/radius3017/etc/raddb/sites-enabled/default (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /(a)\./) { (7) if (&User-Name =~ /(a)\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [preprocess] = ok (7) [chap] = noop (7) [mschap] = noop (7) [digest] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "user001", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) eap: Peer sent EAP Response (code 2) ID 7 length 80 (7) eap: Continuing tunnel setup (7) [eap] = ok (7) } # authorize = ok (7) Found Auth-Type = eap (7) # Executing group from file /usr/local/radius3017/etc/raddb/sites-enabled/default (7) authenticate { (7) eap: Expiring EAP session with state 0x186a0e6c1e6d17c5 (7) eap: Finished EAP session with state 0x186a0e6c1e6d17c5 (7) eap: Previous EAP request found for state 0x186a0e6c1e6d17c5, released from the list (7) eap: Peer sent packet with method EAP PEAP (25) (7) eap: Calling submodule eap_peap to process data (7) eap_peap: Continuing EAP-TLS (7) eap_peap: [eaptls verify] = ok (7) eap_peap: Done initial handshake (7) eap_peap: [eaptls process] = ok (7) eap_peap: Session established. Decoding tunneled attributes (7) eap_peap: PEAP state WAITING FOR INNER IDENTITY (7) eap_peap: Identity - user001 (7) eap_peap: Got inner identity 'user001' (7) eap_peap: Setting default EAP type for tunneled EAP session (7) eap_peap: Got tunneled request (7) eap_peap: EAP-Message = 0x0207000c0175736572303031 (7) eap_peap: Setting User-Name to user001 (7) eap_peap: Sending tunneled request to inner-tunnel (7) eap_peap: EAP-Message = 0x0207000c0175736572303031 (7) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (7) eap_peap: User-Name = "user001" (7) Virtual server inner-tunnel received request (7) EAP-Message = 0x0207000c0175736572303031 (7) FreeRADIUS-Proxied-To = 127.0.0.1 (7) User-Name = "user001" (7) WARNING: Outer and inner identities are the same. User privacy is compromised. (7) server inner-tunnel { (7) # Executing section authorize from file /usr/local/radius3017/etc/raddb/sites-enabled/inner-tunnel (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /(a)\./) { (7) if (&User-Name =~ /(a)\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [chap] = noop (7) [mschap] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "user001", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) update control { (7) &Proxy-To-Realm := LOCAL (7) } # update control = noop (7) eap: Peer sent EAP Response (code 2) ID 7 length 12 (7) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (7) [eap] = ok (7) } # authorize = ok (7) Found Auth-Type = eap (7) # Executing group from file /usr/local/radius3017/etc/raddb/sites-enabled/inner-tunnel (7) authenticate { (7) eap: Peer sent packet with method EAP Identity (1) (7) eap: Calling submodule eap_mschapv2 to process data (7) eap_mschapv2: Issuing Challenge (7) eap: Sending EAP Request (code 1) ID 8 length 43 (7) eap: EAP session adding &reply:State = 0xb2ca8b3bb2c2917f (7) [eap] = handled (7) } # authenticate = handled (7) } # server inner-tunnel (7) Virtual server sending reply (7) EAP-Message = 0x0108002b1a010800261034213726edcf30d2e2417530feca1f17667265657261646975732d332e302e3137 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0xb2ca8b3bb2c2917f09d0e8253bfea91e (7) eap_peap: Got tunneled reply code 11 (7) eap_peap: EAP-Message = 0x0108002b1a010800261034213726edcf30d2e2417530feca1f17667265657261646975732d332e302e3137 (7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_peap: State = 0xb2ca8b3bb2c2917f09d0e8253bfea91e (7) eap_peap: Got tunneled reply RADIUS code 11 (7) eap_peap: EAP-Message = 0x0108002b1a010800261034213726edcf30d2e2417530feca1f17667265657261646975732d332e302e3137 (7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_peap: State = 0xb2ca8b3bb2c2917f09d0e8253bfea91e (7) eap_peap: Got tunneled Access-Challenge (7) eap: Sending EAP Request (code 1) ID 8 length 75 (7) eap: EAP session adding &reply:State = 0x186a0e6c1f6217c5 (7) [eap] = handled (7) } # authenticate = handled (7) Using Post-Auth-Type Challenge (7) # Executing group from file /usr/local/radius3017/etc/raddb/sites-enabled/default (7) Challenge { ... } # empty sub-section is ignored (7) Sent Access-Challenge Id 7 from 192.168.103.2:1812 to 192.168.103.4:47841 length 0 (7) EAP-Message = 0x0108004b190017030100400f36c3251958eae8435610e577612e8e9d6a9080cb3ec9b052234156e0cb6bb615eddb0736adc396fe12817dea26a98327e6bd21b523543ec72fad7d674c001e (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0x186a0e6c1f6217c57984571c96feda45 (7) Finished request Waking up in 4.9 seconds. (8) Received Access-Request Id 8 from 192.168.103.4:47841 to 192.168.103.2:1812 length 272 (8) User-Name = "user001" (8) NAS-IP-Address = 127.0.0.1 (8) Calling-Station-Id = "02-00-00-00-00-01" (8) Framed-MTU = 1400 (8) NAS-Port-Type = Wireless-802.11 (8) Connect-Info = "CONNECT 11Mbps 802.11b" (8) EAP-Message = 0x020800901900170301002086d6d2186da193675b361b94410068b8ae6d915ef3834164f48178e4cce07f08170301006081654fe5086f906d2902662352a8b6c2094b73311fcfedab254e01b11f7b4138e07c7d87dc9185b07b2502ee99edd843285961c629bfa88f5e994c1db85ee10a0c1e48801aee88 (8) State = 0x186a0e6c1f6217c57984571c96feda45 (8) Message-Authenticator = 0x4923fa28964bfa7aef8bc28213d8cd32 (8) session-state: No cached attributes (8) # Executing section authorize from file /usr/local/radius3017/etc/raddb/sites-enabled/default (8) authorize { (8) policy filter_username { (8) if (&User-Name) { (8) if (&User-Name) -> TRUE (8) if (&User-Name) { (8) if (&User-Name =~ / /) { (8) if (&User-Name =~ / /) -> FALSE (8) if (&User-Name =~ /@[^@]*@/ ) { (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (8) if (&User-Name =~ /\.\./ ) { (8) if (&User-Name =~ /\.\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\.$/) { (8) if (&User-Name =~ /\.$/) -> FALSE (8) if (&User-Name =~ /(a)\./) { (8) if (&User-Name =~ /(a)\./) -> FALSE (8) } # if (&User-Name) = notfound (8) } # policy filter_username = notfound (8) [preprocess] = ok (8) [chap] = noop (8) [mschap] = noop (8) [digest] = noop (8) suffix: Checking for suffix after "@" (8) suffix: No '@' in User-Name = "user001", looking up realm NULL (8) suffix: No such realm "NULL" (8) [suffix] = noop (8) eap: Peer sent EAP Response (code 2) ID 8 length 144 (8) eap: Continuing tunnel setup (8) [eap] = ok (8) } # authorize = ok (8) Found Auth-Type = eap (8) # Executing group from file /usr/local/radius3017/etc/raddb/sites-enabled/default (8) authenticate { (8) eap: Expiring EAP session with state 0xb2ca8b3bb2c2917f (8) eap: Finished EAP session with state 0x186a0e6c1f6217c5 (8) eap: Previous EAP request found for state 0x186a0e6c1f6217c5, released from the list (8) eap: Peer sent packet with method EAP PEAP (25) (8) eap: Calling submodule eap_peap to process data (8) eap_peap: Continuing EAP-TLS (8) eap_peap: [eaptls verify] = ok (8) eap_peap: Done initial handshake (8) eap_peap: [eaptls process] = ok (8) eap_peap: Session established. Decoding tunneled attributes (8) eap_peap: PEAP state phase2 (8) eap_peap: EAP method MSCHAPv2 (26) (8) eap_peap: Got tunneled request (8) eap_peap: EAP-Message = 0x020800421a0208003d31d60a5331dba1431cc70e41aed8d01f390000000000000000e029925ac2cca206fe67df52363bad347e0884f74abd901e0075736572303031 (8) eap_peap: Setting User-Name to user001 (8) eap_peap: Sending tunneled request to inner-tunnel (8) eap_peap: EAP-Message = 0x020800421a0208003d31d60a5331dba1431cc70e41aed8d01f390000000000000000e029925ac2cca206fe67df52363bad347e0884f74abd901e0075736572303031 (8) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (8) eap_peap: User-Name = "user001" (8) eap_peap: State = 0xb2ca8b3bb2c2917f09d0e8253bfea91e (8) Virtual server inner-tunnel received request (8) EAP-Message = 0x020800421a0208003d31d60a5331dba1431cc70e41aed8d01f390000000000000000e029925ac2cca206fe67df52363bad347e0884f74abd901e0075736572303031 (8) FreeRADIUS-Proxied-To = 127.0.0.1 (8) User-Name = "user001" (8) State = 0xb2ca8b3bb2c2917f09d0e8253bfea91e (8) WARNING: Outer and inner identities are the same. User privacy is compromised. (8) server inner-tunnel { (8) session-state: No cached attributes (8) # Executing section authorize from file /usr/local/radius3017/etc/raddb/sites-enabled/inner-tunnel (8) authorize { (8) policy filter_username { (8) if (&User-Name) { (8) if (&User-Name) -> TRUE (8) if (&User-Name) { (8) if (&User-Name =~ / /) { (8) if (&User-Name =~ / /) -> FALSE (8) if (&User-Name =~ /@[^@]*@/ ) { (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (8) if (&User-Name =~ /\.\./ ) { (8) if (&User-Name =~ /\.\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\.$/) { (8) if (&User-Name =~ /\.$/) -> FALSE (8) if (&User-Name =~ /(a)\./) { (8) if (&User-Name =~ /(a)\./) -> FALSE (8) } # if (&User-Name) = notfound (8) } # policy filter_username = notfound (8) [chap] = noop (8) [mschap] = noop (8) suffix: Checking for suffix after "@" (8) suffix: No '@' in User-Name = "user001", looking up realm NULL (8) suffix: No such realm "NULL" (8) [suffix] = noop (8) update control { (8) &Proxy-To-Realm := LOCAL (8) } # update control = noop (8) eap: Peer sent EAP Response (code 2) ID 8 length 66 (8) eap: No EAP Start, assuming it's an on-going EAP conversation (8) [eap] = updated (8) [files] = noop rlm_ldap (ldap): Reserved connection (1) (8) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (8) ldap: --> (uid=user001) (8) ldap: Performing search in "dc=home" with filter "(uid=user001)", scope "sub" (8) ldap: Waiting for search result... (8) ldap: User object found at DN "uid=user001,ou=test,dc=home" (8) ldap: Processing user attributes (8) ldap: control:Password-With-Header += 'Pass@word' rlm_ldap (ldap): Released connection (1) (8) [ldap] = updated (8) [expiration] = noop (8) [logintime] = noop (8) pap: No {...} in Password-With-Header, re-writing to Cleartext-Password (8) pap: Removing &control:Password-With-Header (8) pap: WARNING: Auth-Type already set. Not setting to PAP (8) [pap] = noop (8) } # authorize = updated (8) Found Auth-Type = eap (8) # Executing group from file /usr/local/radius3017/etc/raddb/sites-enabled/inner-tunnel (8) authenticate { (8) eap: Expiring EAP session with state 0xb2ca8b3bb2c2917f (8) eap: Finished EAP session with state 0xb2ca8b3bb2c2917f (8) eap: Previous EAP request found for state 0xb2ca8b3bb2c2917f, released from the list (8) eap: Peer sent packet with method EAP MSCHAPv2 (26) (8) eap: Calling submodule eap_mschapv2 to process data (8) eap_mschapv2: # Executing group from file /usr/local/radius3017/etc/raddb/sites-enabled/inner-tunnel (8) eap_mschapv2: authenticate { (8) mschap: Found Cleartext-Password, hashing to create NT-Password (8) mschap: Found Cleartext-Password, hashing to create LM-Password (8) mschap: Creating challenge hash with username: user001 (8) mschap: Client is using MS-CHAPv2 (8) mschap: ERROR: MS-CHAP2-Response is incorrect (8) [mschap] = reject (8) } # authenticate = reject (8) eap: Sending EAP Failure (code 4) ID 8 length 4 (8) eap: Freeing handler (8) [eap] = reject (8) } # authenticate = reject (8) Failed to authenticate the user (8) Using Post-Auth-Type Reject (8) # Executing group from file /usr/local/radius3017/etc/raddb/sites-enabled/inner-tunnel (8) Post-Auth-Type REJECT { (8) attr_filter.access_reject: EXPAND %{User-Name} (8) attr_filter.access_reject: --> user001 (8) attr_filter.access_reject: Matched entry DEFAULT at line 11 (8) [attr_filter.access_reject] = updated (8) update outer.session-state { (8) &Module-Failure-Message := &request:Module-Failure-Message -> 'mschap: MS-CHAP2-Response is incorrect' (8) } # update outer.session-state = noop (8) } # Post-Auth-Type REJECT = updated (8) Login incorrect (mschap: MS-CHAP2-Response is incorrect): [user001] (from client all-network port 0 via TLS tunnel) (8) } # server inner-tunnel (8) Virtual server sending reply (8) MS-CHAP-Error = "\010E=691 R=1 C=9b892032077589b54b87dfec62977166 V=3 M=Authentication rejected" (8) EAP-Message = 0x04080004 (8) Message-Authenticator = 0x00000000000000000000000000000000 (8) eap_peap: Got tunneled reply code 3 (8) eap_peap: MS-CHAP-Error = "\010E=691 R=1 C=9b892032077589b54b87dfec62977166 V=3 M=Authentication rejected" (8) eap_peap: EAP-Message = 0x04080004 (8) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (8) eap_peap: Got tunneled reply RADIUS code 3 (8) eap_peap: MS-CHAP-Error = "\010E=691 R=1 C=9b892032077589b54b87dfec62977166 V=3 M=Authentication rejected" (8) eap_peap: EAP-Message = 0x04080004 (8) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (8) eap_peap: Tunneled authentication was rejected (8) eap_peap: FAILURE (8) eap: Sending EAP Request (code 1) ID 9 length 43 (8) eap: EAP session adding &reply:State = 0x186a0e6c106317c5 (8) [eap] = handled (8) } # authenticate = handled (8) Using Post-Auth-Type Challenge (8) # Executing group from file /usr/local/radius3017/etc/raddb/sites-enabled/default (8) Challenge { ... } # empty sub-section is ignored (8) session-state: Saving cached attributes (8) Module-Failure-Message := "mschap: MS-CHAP2-Response is incorrect" (8) Sent Access-Challenge Id 8 from 192.168.103.2:1812 to 192.168.103.4:47841 length 0 (8) EAP-Message = 0x0109002b1900170301002067e9cac1bf37a0e7b2e58e299d31891a1fcb8301978bc19a82b16cc32f8fc935 (8) Message-Authenticator = 0x00000000000000000000000000000000 (8) State = 0x186a0e6c106317c57984571c96feda45 (8) Finished request Waking up in 4.9 seconds. (9) Received Access-Request Id 9 from 192.168.103.4:47841 to 192.168.103.2:1812 length 208 (9) User-Name = "user001" (9) NAS-IP-Address = 127.0.0.1 (9) Calling-Station-Id = "02-00-00-00-00-01" (9) Framed-MTU = 1400 (9) NAS-Port-Type = Wireless-802.11 (9) Connect-Info = "CONNECT 11Mbps 802.11b" (9) EAP-Message = 0x0209005019001703010020016ad7d5770bd72e9fc473c174260de58a5a1b24aee7f28f076622ce50fd944f1703010020621743e011311bfbbab226da72788784635a0d351a80db3c30713903bebbb8d2 (9) State = 0x186a0e6c106317c57984571c96feda45 (9) Message-Authenticator = 0x6f729f136b21246a5789b189823cacaf (9) Restoring &session-state (9) &session-state:Module-Failure-Message := "mschap: MS-CHAP2-Response is incorrect" (9) # Executing section authorize from file /usr/local/radius3017/etc/raddb/sites-enabled/default (9) authorize { (9) policy filter_username { (9) if (&User-Name) { (9) if (&User-Name) -> TRUE (9) if (&User-Name) { (9) if (&User-Name =~ / /) { (9) if (&User-Name =~ / /) -> FALSE (9) if (&User-Name =~ /@[^@]*@/ ) { (9) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (9) if (&User-Name =~ /\.\./ ) { (9) if (&User-Name =~ /\.\./ ) -> FALSE (9) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (9) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (9) if (&User-Name =~ /\.$/) { (9) if (&User-Name =~ /\.$/) -> FALSE (9) if (&User-Name =~ /(a)\./) { (9) if (&User-Name =~ /(a)\./) -> FALSE (9) } # if (&User-Name) = notfound (9) } # policy filter_username = notfound (9) [preprocess] = ok (9) [chap] = noop (9) [mschap] = noop (9) [digest] = noop (9) suffix: Checking for suffix after "@" (9) suffix: No '@' in User-Name = "user001", looking up realm NULL (9) suffix: No such realm "NULL" (9) [suffix] = noop (9) eap: Peer sent EAP Response (code 2) ID 9 length 80 (9) eap: Continuing tunnel setup (9) [eap] = ok (9) } # authorize = ok (9) Found Auth-Type = eap (9) # Executing group from file /usr/local/radius3017/etc/raddb/sites-enabled/default (9) authenticate { (9) eap: Expiring EAP session with state 0x186a0e6c106317c5 (9) eap: Finished EAP session with state 0x186a0e6c106317c5 (9) eap: Previous EAP request found for state 0x186a0e6c106317c5, released from the list (9) eap: Peer sent packet with method EAP PEAP (25) (9) eap: Calling submodule eap_peap to process data (9) eap_peap: Continuing EAP-TLS (9) eap_peap: [eaptls verify] = ok (9) eap_peap: Done initial handshake (9) eap_peap: [eaptls process] = ok (9) eap_peap: Session established. Decoding tunneled attributes (9) eap_peap: PEAP state send tlv failure (9) eap_peap: Received EAP-TLV response (9) eap_peap: ERROR: The users session was previously rejected: returning reject (again.) (9) eap_peap: This means you need to read the PREVIOUS messages in the debug output (9) eap_peap: to find out the reason why the user was rejected (9) eap_peap: Look for "reject" or "fail". Those earlier messages will tell you (9) eap_peap: what went wrong, and how to fix the problem (9) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module failed (9) eap: Sending EAP Failure (code 4) ID 9 length 4 (9) eap: Failed in EAP select (9) [eap] = invalid (9) } # authenticate = invalid (9) Failed to authenticate the user (9) Using Post-Auth-Type Reject (9) # Executing group from file /usr/local/radius3017/etc/raddb/sites-enabled/default (9) Post-Auth-Type REJECT { (9) attr_filter.access_reject: EXPAND %{User-Name} (9) attr_filter.access_reject: --> user001 (9) attr_filter.access_reject: Matched entry DEFAULT at line 11 (9) [attr_filter.access_reject] = updated (9) [eap] = noop (9) policy remove_reply_message_if_eap { (9) if (&reply:EAP-Message && &reply:Reply-Message) { (9) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (9) else { (9) [noop] = noop (9) } # else = noop (9) } # policy remove_reply_message_if_eap = noop (9) } # Post-Auth-Type REJECT = updated (9) Login incorrect (eap_peap: The users session was previously rejected: returning reject (again.)): [user001] (from client all-network port 0 cli 02-00-00-00-00-01) (9) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (9) Sending delayed response (9) Sent Access-Reject Id 9 from 192.168.103.2:1812 to 192.168.103.4:47841 length 44 (9) EAP-Message = 0x04090004 (9) Message-Authenticator = 0x00000000000000000000000000000000 ## Authenticate with password 'Pass@word'. Waking up in 3.9 seconds. (10) Received Access-Request Id 0 from 192.168.103.4:55548 to 192.168.103.2:1812 length 122 (10) User-Name = "user001" (10) NAS-IP-Address = 127.0.0.1 (10) Calling-Station-Id = "02-00-00-00-00-01" (10) Framed-MTU = 1400 (10) NAS-Port-Type = Wireless-802.11 (10) Connect-Info = "CONNECT 11Mbps 802.11b" (10) EAP-Message = 0x0200000c0175736572303031 (10) Message-Authenticator = 0x50cc7b8af5949c955f1f3d60576990b7 (10) # Executing section authorize from file /usr/local/radius3017/etc/raddb/sites-enabled/default (10) authorize { (10) policy filter_username { (10) if (&User-Name) { (10) if (&User-Name) -> TRUE (10) if (&User-Name) { (10) if (&User-Name =~ / /) { (10) if (&User-Name =~ / /) -> FALSE (10) if (&User-Name =~ /@[^@]*@/ ) { (10) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (10) if (&User-Name =~ /\.\./ ) { (10) if (&User-Name =~ /\.\./ ) -> FALSE (10) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (10) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (10) if (&User-Name =~ /\.$/) { (10) if (&User-Name =~ /\.$/) -> FALSE (10) if (&User-Name =~ /(a)\./) { (10) if (&User-Name =~ /(a)\./) -> FALSE (10) } # if (&User-Name) = notfound (10) } # policy filter_username = notfound (10) [preprocess] = ok (10) [chap] = noop (10) [mschap] = noop (10) [digest] = noop (10) suffix: Checking for suffix after "@" (10) suffix: No '@' in User-Name = "user001", looking up realm NULL (10) suffix: No such realm "NULL" (10) [suffix] = noop (10) eap: Peer sent EAP Response (code 2) ID 0 length 12 (10) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (10) [eap] = ok (10) } # authorize = ok (10) Found Auth-Type = eap (10) # Executing group from file /usr/local/radius3017/etc/raddb/sites-enabled/default (10) authenticate { (10) eap: Peer sent packet with method EAP Identity (1) (10) eap: Calling submodule eap_md5 to process data (10) eap_md5: Issuing MD5 Challenge (10) eap: Sending EAP Request (code 1) ID 1 length 22 (10) eap: EAP session adding &reply:State = 0xb09e5f13b09f5bda (10) [eap] = handled (10) } # authenticate = handled (10) Using Post-Auth-Type Challenge (10) # Executing group from file /usr/local/radius3017/etc/raddb/sites-enabled/default (10) Challenge { ... } # empty sub-section is ignored (10) Sent Access-Challenge Id 0 from 192.168.103.2:1812 to 192.168.103.4:55548 length 0 (10) EAP-Message = 0x010100160410d6321c67873ca6a2fd3f51f8be2c417b (10) Message-Authenticator = 0x00000000000000000000000000000000 (10) State = 0xb09e5f13b09f5bdad63a05ea128e9a97 (10) Finished request Waking up in 0.2 seconds. (11) Received Access-Request Id 1 from 192.168.103.4:55548 to 192.168.103.2:1812 length 134 (11) User-Name = "user001" (11) NAS-IP-Address = 127.0.0.1 (11) Calling-Station-Id = "02-00-00-00-00-01" (11) Framed-MTU = 1400 (11) NAS-Port-Type = Wireless-802.11 (11) Connect-Info = "CONNECT 11Mbps 802.11b" (11) EAP-Message = 0x020100060319 (11) State = 0xb09e5f13b09f5bdad63a05ea128e9a97 (11) Message-Authenticator = 0xb182df041321aa5880caf743ab8893e5 (11) session-state: No cached attributes (11) # Executing section authorize from file /usr/local/radius3017/etc/raddb/sites-enabled/default (11) authorize { (11) policy filter_username { (11) if (&User-Name) { (11) if (&User-Name) -> TRUE (11) if (&User-Name) { (11) if (&User-Name =~ / /) { (11) if (&User-Name =~ / /) -> FALSE (11) if (&User-Name =~ /@[^@]*@/ ) { (11) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (11) if (&User-Name =~ /\.\./ ) { (11) if (&User-Name =~ /\.\./ ) -> FALSE (11) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (11) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (11) if (&User-Name =~ /\.$/) { (11) if (&User-Name =~ /\.$/) -> FALSE (11) if (&User-Name =~ /(a)\./) { (11) if (&User-Name =~ /(a)\./) -> FALSE (11) } # if (&User-Name) = notfound (11) } # policy filter_username = notfound (11) [preprocess] = ok (11) [chap] = noop (11) [mschap] = noop (11) [digest] = noop (11) suffix: Checking for suffix after "@" (11) suffix: No '@' in User-Name = "user001", looking up realm NULL (11) suffix: No such realm "NULL" (11) [suffix] = noop (11) eap: Peer sent EAP Response (code 2) ID 1 length 6 (11) eap: No EAP Start, assuming it's an on-going EAP conversation (11) [eap] = updated (11) [files] = noop rlm_ldap (ldap): Reserved connection (2) (11) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (11) ldap: --> (uid=user001) (11) ldap: Performing search in "dc=home" with filter "(uid=user001)", scope "sub" (11) ldap: Waiting for search result... (11) ldap: User object found at DN "uid=user001,ou=test,dc=home" (11) ldap: Processing user attributes (11) ldap: control:Password-With-Header += 'Pass@word' rlm_ldap (ldap): Released connection (2) Need 4 more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (6), 1 of 26 pending slots used rlm_ldap (ldap): Connecting to ldap://192.168.103.10:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (11) [ldap] = updated (11) [expiration] = noop (11) [logintime] = noop (11) pap: No {...} in Password-With-Header, re-writing to Cleartext-Password (11) pap: Removing &control:Password-With-Header (11) pap: WARNING: Auth-Type already set. Not setting to PAP (11) [pap] = noop (11) } # authorize = updated (11) Found Auth-Type = eap (11) # Executing group from file /usr/local/radius3017/etc/raddb/sites-enabled/default (11) authenticate { (11) eap: Expiring EAP session with state 0xb09e5f13b09f5bda (11) eap: Finished EAP session with state 0xb09e5f13b09f5bda (11) eap: Previous EAP request found for state 0xb09e5f13b09f5bda, released from the list (11) eap: Peer sent packet with method EAP NAK (3) (11) eap: Found mutually acceptable type PEAP (25) (11) eap: Calling submodule eap_peap to process data (11) eap_peap: Initiating new EAP-TLS session (11) eap_peap: [eaptls start] = request (11) eap: Sending EAP Request (code 1) ID 2 length 6 (11) eap: EAP session adding &reply:State = 0xb09e5f13b19c46da (11) [eap] = handled (11) } # authenticate = handled (11) Using Post-Auth-Type Challenge (11) # Executing group from file /usr/local/radius3017/etc/raddb/sites-enabled/default (11) Challenge { ... } # empty sub-section is ignored (11) Sent Access-Challenge Id 1 from 192.168.103.2:1812 to 192.168.103.4:55548 length 0 (11) EAP-Message = 0x010200061920 (11) Message-Authenticator = 0x00000000000000000000000000000000 (11) State = 0xb09e5f13b19c46dad63a05ea128e9a97 (11) Finished request Waking up in 0.2 seconds. (12) Received Access-Request Id 2 from 192.168.103.4:55548 to 192.168.103.2:1812 length 293 (12) User-Name = "user001" (12) NAS-IP-Address = 127.0.0.1 (12) Calling-Station-Id = "02-00-00-00-00-01" (12) Framed-MTU = 1400 (12) NAS-Port-Type = Wireless-802.11 (12) Connect-Info = "CONNECT 11Mbps 802.11b" (12) EAP-Message = 0x020200a519800000009b16030100960100009203015b332b712476e6c7a625df7a5644d95a0f230a8d77233c34e18dccd5c1e2efa300004cc014c00a0039003800880087c00fc00500350084c013c00900330032009a009900450044c00ec004002f00960041c012c00800160013c00dc003000a0007c0 (12) State = 0xb09e5f13b19c46dad63a05ea128e9a97 (12) Message-Authenticator = 0x1d9a03ee094efc6d647b67bb550eee13 (12) session-state: No cached attributes (12) # Executing section authorize from file /usr/local/radius3017/etc/raddb/sites-enabled/default (12) authorize { (12) policy filter_username { (12) if (&User-Name) { (12) if (&User-Name) -> TRUE (12) if (&User-Name) { (12) if (&User-Name =~ / /) { (12) if (&User-Name =~ / /) -> FALSE (12) if (&User-Name =~ /@[^@]*@/ ) { (12) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (12) if (&User-Name =~ /\.\./ ) { (12) if (&User-Name =~ /\.\./ ) -> FALSE (12) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (12) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (12) if (&User-Name =~ /\.$/) { (12) if (&User-Name =~ /\.$/) -> FALSE (12) if (&User-Name =~ /(a)\./) { (12) if (&User-Name =~ /(a)\./) -> FALSE (12) } # if (&User-Name) = notfound (12) } # policy filter_username = notfound (12) [preprocess] = ok (12) [chap] = noop (12) [mschap] = noop (12) [digest] = noop (12) suffix: Checking for suffix after "@" (12) suffix: No '@' in User-Name = "user001", looking up realm NULL (12) suffix: No such realm "NULL" (12) [suffix] = noop (12) eap: Peer sent EAP Response (code 2) ID 2 length 165 (12) eap: Continuing tunnel setup (12) [eap] = ok (12) } # authorize = ok (12) Found Auth-Type = eap (12) # Executing group from file /usr/local/radius3017/etc/raddb/sites-enabled/default (12) authenticate { (12) eap: Expiring EAP session with state 0xb09e5f13b19c46da (12) eap: Finished EAP session with state 0xb09e5f13b19c46da (12) eap: Previous EAP request found for state 0xb09e5f13b19c46da, released from the list (12) eap: Peer sent packet with method EAP PEAP (25) (12) eap: Calling submodule eap_peap to process data (12) eap_peap: Continuing EAP-TLS (12) eap_peap: Peer indicated complete TLS record size will be 155 bytes (12) eap_peap: Got complete TLS record (155 bytes) (12) eap_peap: [eaptls verify] = length included (12) eap_peap: (other): before/accept initialization (12) eap_peap: TLS_accept: before/accept initialization (12) eap_peap: <<< recv TLS 1.0 Handshake [length 0096], ClientHello (12) eap_peap: TLS_accept: SSLv3 read client hello A (12) eap_peap: >>> send TLS 1.0 Handshake [length 003e], ServerHello (12) eap_peap: TLS_accept: SSLv3 write server hello A (12) eap_peap: >>> send TLS 1.0 Handshake [length 08d3], Certificate (12) eap_peap: TLS_accept: SSLv3 write certificate A (12) eap_peap: >>> send TLS 1.0 Handshake [length 014b], ServerKeyExchange (12) eap_peap: TLS_accept: SSLv3 write key exchange A (12) eap_peap: >>> send TLS 1.0 Handshake [length 0004], ServerHelloDone (12) eap_peap: TLS_accept: SSLv3 write server done A (12) eap_peap: TLS_accept: SSLv3 flush data (12) eap_peap: TLS_accept: Need to read more data: SSLv3 read client certificate A (12) eap_peap: TLS_accept: Need to read more data: SSLv3 read client certificate A (12) eap_peap: In SSL Handshake Phase (12) eap_peap: In SSL Accept mode (12) eap_peap: [eaptls process] = handled (12) eap: Sending EAP Request (code 1) ID 3 length 1004 (12) eap: EAP session adding &reply:State = 0xb09e5f13b29d46da (12) [eap] = handled (12) } # authenticate = handled (12) Using Post-Auth-Type Challenge (12) # Executing group from file /usr/local/radius3017/etc/raddb/sites-enabled/default (12) Challenge { ... } # empty sub-section is ignored (12) Sent Access-Challenge Id 2 from 192.168.103.2:1812 to 192.168.103.4:55548 length 0 (12) EAP-Message = 0x010303ec19c000000a74160301003e0200003a03015b32acfc674cdf49e08c7da28c0d7d914ed6b90c98b12e8b612e916f445f2a4e00c014000012ff01000100000b000403000102000f00010116030108d30b0008cf0008cc0003de308203da308202c2a003020102020101300d06092a864886f70d01 (12) Message-Authenticator = 0x00000000000000000000000000000000 (12) State = 0xb09e5f13b29d46dad63a05ea128e9a97 (12) Finished request Waking up in 0.2 seconds. (13) Received Access-Request Id 3 from 192.168.103.4:55548 to 192.168.103.2:1812 length 134 (13) User-Name = "user001" (13) NAS-IP-Address = 127.0.0.1 (13) Calling-Station-Id = "02-00-00-00-00-01" (13) Framed-MTU = 1400 (13) NAS-Port-Type = Wireless-802.11 (13) Connect-Info = "CONNECT 11Mbps 802.11b" (13) EAP-Message = 0x020300061900 (13) State = 0xb09e5f13b29d46dad63a05ea128e9a97 (13) Message-Authenticator = 0x6c7d31b819157bc05029cd376da843cc (13) session-state: No cached attributes (13) # Executing section authorize from file /usr/local/radius3017/etc/raddb/sites-enabled/default (13) authorize { (13) policy filter_username { (13) if (&User-Name) { (13) if (&User-Name) -> TRUE (13) if (&User-Name) { (13) if (&User-Name =~ / /) { (13) if (&User-Name =~ / /) -> FALSE (13) if (&User-Name =~ /@[^@]*@/ ) { (13) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (13) if (&User-Name =~ /\.\./ ) { (13) if (&User-Name =~ /\.\./ ) -> FALSE (13) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (13) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (13) if (&User-Name =~ /\.$/) { (13) if (&User-Name =~ /\.$/) -> FALSE (13) if (&User-Name =~ /(a)\./) { (13) if (&User-Name =~ /(a)\./) -> FALSE (13) } # if (&User-Name) = notfound (13) } # policy filter_username = notfound (13) [preprocess] = ok (13) [chap] = noop (13) [mschap] = noop (13) [digest] = noop (13) suffix: Checking for suffix after "@" (13) suffix: No '@' in User-Name = "user001", looking up realm NULL (13) suffix: No such realm "NULL" (13) [suffix] = noop (13) eap: Peer sent EAP Response (code 2) ID 3 length 6 (13) eap: Continuing tunnel setup (13) [eap] = ok (13) } # authorize = ok (13) Found Auth-Type = eap (13) # Executing group from file /usr/local/radius3017/etc/raddb/sites-enabled/default (13) authenticate { (13) eap: Expiring EAP session with state 0xb09e5f13b29d46da (13) eap: Finished EAP session with state 0xb09e5f13b29d46da (13) eap: Previous EAP request found for state 0xb09e5f13b29d46da, released from the list (13) eap: Peer sent packet with method EAP PEAP (25) (13) eap: Calling submodule eap_peap to process data (13) eap_peap: Continuing EAP-TLS (13) eap_peap: Peer ACKed our handshake fragment (13) eap_peap: [eaptls verify] = request (13) eap_peap: [eaptls process] = handled (13) eap: Sending EAP Request (code 1) ID 4 length 1000 (13) eap: EAP session adding &reply:State = 0xb09e5f13b39a46da (13) [eap] = handled (13) } # authenticate = handled (13) Using Post-Auth-Type Challenge (13) # Executing group from file /usr/local/radius3017/etc/raddb/sites-enabled/default (13) Challenge { ... } # empty sub-section is ignored (13) Sent Access-Challenge Id 3 from 192.168.103.2:1812 to 192.168.103.4:55548 length 0 (13) EAP-Message = 0x010403e81940d3231b0bfa48b450b8c89f0432a23a5ac5d3f6b7f19378f4901279ac237212a82650f14d833aed8e1adce602b8c6de097685d288edf92cdf406d49f25ef4d291c474d5c1a6ffbe64fae1ef6197d30004e8308204e4308203cca003020102020900c762d342c4805c0e300d06092a864886 (13) Message-Authenticator = 0x00000000000000000000000000000000 (13) State = 0xb09e5f13b39a46dad63a05ea128e9a97 (13) Finished request Waking up in 0.2 seconds. (14) Received Access-Request Id 4 from 192.168.103.4:55548 to 192.168.103.2:1812 length 134 (14) User-Name = "user001" (14) NAS-IP-Address = 127.0.0.1 (14) Calling-Station-Id = "02-00-00-00-00-01" (14) Framed-MTU = 1400 (14) NAS-Port-Type = Wireless-802.11 (14) Connect-Info = "CONNECT 11Mbps 802.11b" (14) EAP-Message = 0x020400061900 (14) State = 0xb09e5f13b39a46dad63a05ea128e9a97 (14) Message-Authenticator = 0x5c1a6df3961ae0c425c59baf84cd046e (14) session-state: No cached attributes (14) # Executing section authorize from file /usr/local/radius3017/etc/raddb/sites-enabled/default (14) authorize { (14) policy filter_username { (14) if (&User-Name) { (14) if (&User-Name) -> TRUE (14) if (&User-Name) { (14) if (&User-Name =~ / /) { (14) if (&User-Name =~ / /) -> FALSE (14) if (&User-Name =~ /@[^@]*@/ ) { (14) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (14) if (&User-Name =~ /\.\./ ) { (14) if (&User-Name =~ /\.\./ ) -> FALSE (14) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (14) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (14) if (&User-Name =~ /\.$/) { (14) if (&User-Name =~ /\.$/) -> FALSE (14) if (&User-Name =~ /(a)\./) { (14) if (&User-Name =~ /(a)\./) -> FALSE (14) } # if (&User-Name) = notfound (14) } # policy filter_username = notfound (14) [preprocess] = ok (14) [chap] = noop (14) [mschap] = noop (14) [digest] = noop (14) suffix: Checking for suffix after "@" (14) suffix: No '@' in User-Name = "user001", looking up realm NULL (14) suffix: No such realm "NULL" (14) [suffix] = noop (14) eap: Peer sent EAP Response (code 2) ID 4 length 6 (14) eap: Continuing tunnel setup (14) [eap] = ok (14) } # authorize = ok (14) Found Auth-Type = eap (14) # Executing group from file /usr/local/radius3017/etc/raddb/sites-enabled/default (14) authenticate { (14) eap: Expiring EAP session with state 0xb09e5f13b39a46da (14) eap: Finished EAP session with state 0xb09e5f13b39a46da (14) eap: Previous EAP request found for state 0xb09e5f13b39a46da, released from the list (14) eap: Peer sent packet with method EAP PEAP (25) (14) eap: Calling submodule eap_peap to process data (14) eap_peap: Continuing EAP-TLS (14) eap_peap: Peer ACKed our handshake fragment (14) eap_peap: [eaptls verify] = request (14) eap_peap: [eaptls process] = handled (14) eap: Sending EAP Request (code 1) ID 5 length 694 (14) eap: EAP session adding &reply:State = 0xb09e5f13b49b46da (14) [eap] = handled (14) } # authenticate = handled (14) Using Post-Auth-Type Challenge (14) # Executing group from file /usr/local/radius3017/etc/raddb/sites-enabled/default (14) Challenge { ... } # empty sub-section is ignored (14) Sent Access-Challenge Id 4 from 192.168.103.2:1812 to 192.168.103.4:55548 length 0 (14) EAP-Message = 0x010502b61900130101ff040530030101ff30360603551d1f042f302d302ba029a0278625687474703a2f2f7777772e6578616d706c652e6f72672f6578616d706c655f63612e63726c300d06092a864886f70d0101050500038201010092d400531c09e1c44c689f11afbb4bc09bf6857fc4464ea15c59 (14) Message-Authenticator = 0x00000000000000000000000000000000 (14) State = 0xb09e5f13b49b46dad63a05ea128e9a97 (14) Finished request Waking up in 0.2 seconds. (15) Received Access-Request Id 5 from 192.168.103.4:55548 to 192.168.103.2:1812 length 272 (15) User-Name = "user001" (15) NAS-IP-Address = 127.0.0.1 (15) Calling-Station-Id = "02-00-00-00-00-01" (15) Framed-MTU = 1400 (15) NAS-Port-Type = Wireless-802.11 (15) Connect-Info = "CONNECT 11Mbps 802.11b" (15) EAP-Message = 0x020500901980000000861603010046100000424104f00bdd46adeb6927a8f17dd7135e98f3488b717e5addab9989b7b6d583a161d8ce6df2d8e2340631443ca987572ebd98c3831eb6b1ed2d73ec362c3276aeeb2e1403010001011603010030c055f4c3cc048b2a43f9b28f9463eae395a66084de092b (15) State = 0xb09e5f13b49b46dad63a05ea128e9a97 (15) Message-Authenticator = 0x9342a7c9c6451a195361aa6f8d0dc94b (15) session-state: No cached attributes (15) # Executing section authorize from file /usr/local/radius3017/etc/raddb/sites-enabled/default (15) authorize { (15) policy filter_username { (15) if (&User-Name) { (15) if (&User-Name) -> TRUE (15) if (&User-Name) { (15) if (&User-Name =~ / /) { (15) if (&User-Name =~ / /) -> FALSE (15) if (&User-Name =~ /@[^@]*@/ ) { (15) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (15) if (&User-Name =~ /\.\./ ) { (15) if (&User-Name =~ /\.\./ ) -> FALSE (15) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (15) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (15) if (&User-Name =~ /\.$/) { (15) if (&User-Name =~ /\.$/) -> FALSE (15) if (&User-Name =~ /(a)\./) { (15) if (&User-Name =~ /(a)\./) -> FALSE (15) } # if (&User-Name) = notfound (15) } # policy filter_username = notfound (15) [preprocess] = ok (15) [chap] = noop (15) [mschap] = noop (15) [digest] = noop (15) suffix: Checking for suffix after "@" (15) suffix: No '@' in User-Name = "user001", looking up realm NULL (15) suffix: No such realm "NULL" (15) [suffix] = noop (15) eap: Peer sent EAP Response (code 2) ID 5 length 144 (15) eap: Continuing tunnel setup (15) [eap] = ok (15) } # authorize = ok (15) Found Auth-Type = eap (15) # Executing group from file /usr/local/radius3017/etc/raddb/sites-enabled/default (15) authenticate { (15) eap: Expiring EAP session with state 0xb09e5f13b49b46da (15) eap: Finished EAP session with state 0xb09e5f13b49b46da (15) eap: Previous EAP request found for state 0xb09e5f13b49b46da, released from the list (15) eap: Peer sent packet with method EAP PEAP (25) (15) eap: Calling submodule eap_peap to process data (15) eap_peap: Continuing EAP-TLS (15) eap_peap: Peer indicated complete TLS record size will be 134 bytes (15) eap_peap: Got complete TLS record (134 bytes) (15) eap_peap: [eaptls verify] = length included (15) eap_peap: <<< recv TLS 1.0 Handshake [length 0046], ClientKeyExchange (15) eap_peap: TLS_accept: SSLv3 read client key exchange A (15) eap_peap: <<< recv TLS 1.0 ChangeCipherSpec [length 0001] (15) eap_peap: <<< recv TLS 1.0 Handshake [length 0010], Finished (15) eap_peap: TLS_accept: SSLv3 read finished A (15) eap_peap: >>> send TLS 1.0 ChangeCipherSpec [length 0001] (15) eap_peap: TLS_accept: SSLv3 write change cipher spec A (15) eap_peap: >>> send TLS 1.0 Handshake [length 0010], Finished (15) eap_peap: TLS_accept: SSLv3 write finished A (15) eap_peap: TLS_accept: SSLv3 flush data (15) eap_peap: (other): SSL negotiation finished successfully (15) eap_peap: SSL Connection Established (15) eap_peap: [eaptls process] = handled (15) eap: Sending EAP Request (code 1) ID 6 length 65 (15) eap: EAP session adding &reply:State = 0xb09e5f13b59846da (15) [eap] = handled (15) } # authenticate = handled (15) Using Post-Auth-Type Challenge (15) # Executing group from file /usr/local/radius3017/etc/raddb/sites-enabled/default (15) Challenge { ... } # empty sub-section is ignored (15) Sent Access-Challenge Id 5 from 192.168.103.2:1812 to 192.168.103.4:55548 length 0 (15) EAP-Message = 0x01060041190014030100010116030100300fc7f80d490e6e1cb2842fe3260f0d2f39da6fb63644ce1be35dfe89d182049d8f336cc7c1b3225f34930db337c14be6 (15) Message-Authenticator = 0x00000000000000000000000000000000 (15) State = 0xb09e5f13b59846dad63a05ea128e9a97 (15) Finished request Waking up in 0.2 seconds. (16) Received Access-Request Id 6 from 192.168.103.4:55548 to 192.168.103.2:1812 length 134 (16) User-Name = "user001" (16) NAS-IP-Address = 127.0.0.1 (16) Calling-Station-Id = "02-00-00-00-00-01" (16) Framed-MTU = 1400 (16) NAS-Port-Type = Wireless-802.11 (16) Connect-Info = "CONNECT 11Mbps 802.11b" (16) EAP-Message = 0x020600061900 (16) State = 0xb09e5f13b59846dad63a05ea128e9a97 (16) Message-Authenticator = 0xece74a0c54385df66f5f86aca47aeaf1 (16) session-state: No cached attributes (16) # Executing section authorize from file /usr/local/radius3017/etc/raddb/sites-enabled/default (16) authorize { (16) policy filter_username { (16) if (&User-Name) { (16) if (&User-Name) -> TRUE (16) if (&User-Name) { (16) if (&User-Name =~ / /) { (16) if (&User-Name =~ / /) -> FALSE (16) if (&User-Name =~ /@[^@]*@/ ) { (16) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (16) if (&User-Name =~ /\.\./ ) { (16) if (&User-Name =~ /\.\./ ) -> FALSE (16) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (16) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (16) if (&User-Name =~ /\.$/) { (16) if (&User-Name =~ /\.$/) -> FALSE (16) if (&User-Name =~ /(a)\./) { (16) if (&User-Name =~ /(a)\./) -> FALSE (16) } # if (&User-Name) = notfound (16) } # policy filter_username = notfound (16) [preprocess] = ok (16) [chap] = noop (16) [mschap] = noop (16) [digest] = noop (16) suffix: Checking for suffix after "@" (16) suffix: No '@' in User-Name = "user001", looking up realm NULL (16) suffix: No such realm "NULL" (16) [suffix] = noop (16) eap: Peer sent EAP Response (code 2) ID 6 length 6 (16) eap: Continuing tunnel setup (16) [eap] = ok (16) } # authorize = ok (16) Found Auth-Type = eap (16) # Executing group from file /usr/local/radius3017/etc/raddb/sites-enabled/default (16) authenticate { (16) eap: Expiring EAP session with state 0xb09e5f13b59846da (16) eap: Finished EAP session with state 0xb09e5f13b59846da (16) eap: Previous EAP request found for state 0xb09e5f13b59846da, released from the list (16) eap: Peer sent packet with method EAP PEAP (25) (16) eap: Calling submodule eap_peap to process data (16) eap_peap: Continuing EAP-TLS (16) eap_peap: Peer ACKed our handshake fragment. handshake is finished (16) eap_peap: [eaptls verify] = success (16) eap_peap: [eaptls process] = success (16) eap_peap: Session established. Decoding tunneled attributes (16) eap_peap: PEAP state TUNNEL ESTABLISHED (16) eap: Sending EAP Request (code 1) ID 7 length 43 (16) eap: EAP session adding &reply:State = 0xb09e5f13b69946da (16) [eap] = handled (16) } # authenticate = handled (16) Using Post-Auth-Type Challenge (16) # Executing group from file /usr/local/radius3017/etc/raddb/sites-enabled/default (16) Challenge { ... } # empty sub-section is ignored (16) Sent Access-Challenge Id 6 from 192.168.103.2:1812 to 192.168.103.4:55548 length 0 (16) EAP-Message = 0x0107002b19001703010020d963fef29252de942d53a7854ea09fef83bcd1e956f973ecd66a02cae0d3224e (16) Message-Authenticator = 0x00000000000000000000000000000000 (16) State = 0xb09e5f13b69946dad63a05ea128e9a97 (16) Finished request Waking up in 0.2 seconds. (17) Received Access-Request Id 7 from 192.168.103.4:55548 to 192.168.103.2:1812 length 208 (17) User-Name = "user001" (17) NAS-IP-Address = 127.0.0.1 (17) Calling-Station-Id = "02-00-00-00-00-01" (17) Framed-MTU = 1400 (17) NAS-Port-Type = Wireless-802.11 (17) Connect-Info = "CONNECT 11Mbps 802.11b" (17) EAP-Message = 0x0207005019001703010020462bb66ea4ac9026c0c35a6b9e4f6a1458adf64862409256953d11d325aa52c51703010020c2f065c0021137ff119b7b8573bad0aec7f8e9c6981c77e19b6510f286c716ce (17) State = 0xb09e5f13b69946dad63a05ea128e9a97 (17) Message-Authenticator = 0x1832f64b129b49b2aaef585c6e003614 (17) session-state: No cached attributes (17) # Executing section authorize from file /usr/local/radius3017/etc/raddb/sites-enabled/default (17) authorize { (17) policy filter_username { (17) if (&User-Name) { (17) if (&User-Name) -> TRUE (17) if (&User-Name) { (17) if (&User-Name =~ / /) { (17) if (&User-Name =~ / /) -> FALSE (17) if (&User-Name =~ /@[^@]*@/ ) { (17) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (17) if (&User-Name =~ /\.\./ ) { (17) if (&User-Name =~ /\.\./ ) -> FALSE (17) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (17) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (17) if (&User-Name =~ /\.$/) { (17) if (&User-Name =~ /\.$/) -> FALSE (17) if (&User-Name =~ /(a)\./) { (17) if (&User-Name =~ /(a)\./) -> FALSE (17) } # if (&User-Name) = notfound (17) } # policy filter_username = notfound (17) [preprocess] = ok (17) [chap] = noop (17) [mschap] = noop (17) [digest] = noop (17) suffix: Checking for suffix after "@" (17) suffix: No '@' in User-Name = "user001", looking up realm NULL (17) suffix: No such realm "NULL" (17) [suffix] = noop (17) eap: Peer sent EAP Response (code 2) ID 7 length 80 (17) eap: Continuing tunnel setup (17) [eap] = ok (17) } # authorize = ok (17) Found Auth-Type = eap (17) # Executing group from file /usr/local/radius3017/etc/raddb/sites-enabled/default (17) authenticate { (17) eap: Expiring EAP session with state 0xb09e5f13b69946da (17) eap: Finished EAP session with state 0xb09e5f13b69946da (17) eap: Previous EAP request found for state 0xb09e5f13b69946da, released from the list (17) eap: Peer sent packet with method EAP PEAP (25) (17) eap: Calling submodule eap_peap to process data (17) eap_peap: Continuing EAP-TLS (17) eap_peap: [eaptls verify] = ok (17) eap_peap: Done initial handshake (17) eap_peap: [eaptls process] = ok (17) eap_peap: Session established. Decoding tunneled attributes (17) eap_peap: PEAP state WAITING FOR INNER IDENTITY (17) eap_peap: Identity - user001 (17) eap_peap: Got inner identity 'user001' (17) eap_peap: Setting default EAP type for tunneled EAP session (17) eap_peap: Got tunneled request (17) eap_peap: EAP-Message = 0x0207000c0175736572303031 (17) eap_peap: Setting User-Name to user001 (17) eap_peap: Sending tunneled request to inner-tunnel (17) eap_peap: EAP-Message = 0x0207000c0175736572303031 (17) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (17) eap_peap: User-Name = "user001" (17) Virtual server inner-tunnel received request (17) EAP-Message = 0x0207000c0175736572303031 (17) FreeRADIUS-Proxied-To = 127.0.0.1 (17) User-Name = "user001" (17) WARNING: Outer and inner identities are the same. User privacy is compromised. (17) server inner-tunnel { (17) # Executing section authorize from file /usr/local/radius3017/etc/raddb/sites-enabled/inner-tunnel (17) authorize { (17) policy filter_username { (17) if (&User-Name) { (17) if (&User-Name) -> TRUE (17) if (&User-Name) { (17) if (&User-Name =~ / /) { (17) if (&User-Name =~ / /) -> FALSE (17) if (&User-Name =~ /@[^@]*@/ ) { (17) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (17) if (&User-Name =~ /\.\./ ) { (17) if (&User-Name =~ /\.\./ ) -> FALSE (17) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (17) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (17) if (&User-Name =~ /\.$/) { (17) if (&User-Name =~ /\.$/) -> FALSE (17) if (&User-Name =~ /(a)\./) { (17) if (&User-Name =~ /(a)\./) -> FALSE (17) } # if (&User-Name) = notfound (17) } # policy filter_username = notfound (17) [chap] = noop (17) [mschap] = noop (17) suffix: Checking for suffix after "@" (17) suffix: No '@' in User-Name = "user001", looking up realm NULL (17) suffix: No such realm "NULL" (17) [suffix] = noop (17) update control { (17) &Proxy-To-Realm := LOCAL (17) } # update control = noop (17) eap: Peer sent EAP Response (code 2) ID 7 length 12 (17) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (17) [eap] = ok (17) } # authorize = ok (17) Found Auth-Type = eap (17) # Executing group from file /usr/local/radius3017/etc/raddb/sites-enabled/inner-tunnel (17) authenticate { (17) eap: Peer sent packet with method EAP Identity (1) (17) eap: Calling submodule eap_mschapv2 to process data (17) eap_mschapv2: Issuing Challenge (17) eap: Sending EAP Request (code 1) ID 8 length 43 (17) eap: EAP session adding &reply:State = 0xa0858e68a08d9427 (17) [eap] = handled (17) } # authenticate = handled (17) } # server inner-tunnel (17) Virtual server sending reply (17) EAP-Message = 0x0108002b1a0108002610285ffc4dd3c42977290efb22ee95fb19667265657261646975732d332e302e3137 (17) Message-Authenticator = 0x00000000000000000000000000000000 (17) State = 0xa0858e68a08d9427d9ffae98230c67f7 (17) eap_peap: Got tunneled reply code 11 (17) eap_peap: EAP-Message = 0x0108002b1a0108002610285ffc4dd3c42977290efb22ee95fb19667265657261646975732d332e302e3137 (17) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (17) eap_peap: State = 0xa0858e68a08d9427d9ffae98230c67f7 (17) eap_peap: Got tunneled reply RADIUS code 11 (17) eap_peap: EAP-Message = 0x0108002b1a0108002610285ffc4dd3c42977290efb22ee95fb19667265657261646975732d332e302e3137 (17) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (17) eap_peap: State = 0xa0858e68a08d9427d9ffae98230c67f7 (17) eap_peap: Got tunneled Access-Challenge (17) eap: Sending EAP Request (code 1) ID 8 length 75 (17) eap: EAP session adding &reply:State = 0xb09e5f13b79646da (17) [eap] = handled (17) } # authenticate = handled (17) Using Post-Auth-Type Challenge (17) # Executing group from file /usr/local/radius3017/etc/raddb/sites-enabled/default (17) Challenge { ... } # empty sub-section is ignored (17) Sent Access-Challenge Id 7 from 192.168.103.2:1812 to 192.168.103.4:55548 length 0 (17) EAP-Message = 0x0108004b190017030100404b7b38e297a483e4bc6fbe4d5269ff1df96d038bb38ba7e88b5c0c76e58b492e70bd4b8a04f24fa8c0f4a449143e5f85e2c7d6ed884e9f54aee157e2c0aca9a4 (17) Message-Authenticator = 0x00000000000000000000000000000000 (17) State = 0xb09e5f13b79646dad63a05ea128e9a97 (17) Finished request Waking up in 0.2 seconds. (18) Received Access-Request Id 8 from 192.168.103.4:55548 to 192.168.103.2:1812 length 272 (18) User-Name = "user001" (18) NAS-IP-Address = 127.0.0.1 (18) Calling-Station-Id = "02-00-00-00-00-01" (18) Framed-MTU = 1400 (18) NAS-Port-Type = Wireless-802.11 (18) Connect-Info = "CONNECT 11Mbps 802.11b" (18) EAP-Message = 0x020800901900170301002019aa35606f604db1818d001c7edff14e7bb9c0444c9ec8971010de14cdf58c2c17030100603322beb1b11abae87865f328154b21857d5e3dc7ae65e18e8a535931986862b557ad8ec588b069a3a5808b06c7d6c119f6ffedbc43fbe839c0437fd8c6c1d7e09ceb139ac141ab (18) State = 0xb09e5f13b79646dad63a05ea128e9a97 (18) Message-Authenticator = 0xda76de704f613eaad6b01a2e3a65a0fc (18) session-state: No cached attributes (18) # Executing section authorize from file /usr/local/radius3017/etc/raddb/sites-enabled/default (18) authorize { (18) policy filter_username { (18) if (&User-Name) { (18) if (&User-Name) -> TRUE (18) if (&User-Name) { (18) if (&User-Name =~ / /) { (18) if (&User-Name =~ / /) -> FALSE (18) if (&User-Name =~ /@[^@]*@/ ) { (18) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (18) if (&User-Name =~ /\.\./ ) { (18) if (&User-Name =~ /\.\./ ) -> FALSE (18) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (18) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (18) if (&User-Name =~ /\.$/) { (18) if (&User-Name =~ /\.$/) -> FALSE (18) if (&User-Name =~ /(a)\./) { (18) if (&User-Name =~ /(a)\./) -> FALSE (18) } # if (&User-Name) = notfound (18) } # policy filter_username = notfound (18) [preprocess] = ok (18) [chap] = noop (18) [mschap] = noop (18) [digest] = noop (18) suffix: Checking for suffix after "@" (18) suffix: No '@' in User-Name = "user001", looking up realm NULL (18) suffix: No such realm "NULL" (18) [suffix] = noop (18) eap: Peer sent EAP Response (code 2) ID 8 length 144 (18) eap: Continuing tunnel setup (18) [eap] = ok (18) } # authorize = ok (18) Found Auth-Type = eap (18) # Executing group from file /usr/local/radius3017/etc/raddb/sites-enabled/default (18) authenticate { (18) eap: Expiring EAP session with state 0xa0858e68a08d9427 (18) eap: Finished EAP session with state 0xb09e5f13b79646da (18) eap: Previous EAP request found for state 0xb09e5f13b79646da, released from the list (18) eap: Peer sent packet with method EAP PEAP (25) (18) eap: Calling submodule eap_peap to process data (18) eap_peap: Continuing EAP-TLS (18) eap_peap: [eaptls verify] = ok (18) eap_peap: Done initial handshake (18) eap_peap: [eaptls process] = ok (18) eap_peap: Session established. Decoding tunneled attributes (18) eap_peap: PEAP state phase2 (18) eap_peap: EAP method MSCHAPv2 (26) (18) eap_peap: Got tunneled request (18) eap_peap: EAP-Message = 0x020800421a0208003d319ab058f06ae820a4864bb6c4c7d9e96100000000000000008a61710780a8f4e5efe100e37b236203a29f8d469c5e1db70075736572303031 (18) eap_peap: Setting User-Name to user001 (18) eap_peap: Sending tunneled request to inner-tunnel (18) eap_peap: EAP-Message = 0x020800421a0208003d319ab058f06ae820a4864bb6c4c7d9e96100000000000000008a61710780a8f4e5efe100e37b236203a29f8d469c5e1db70075736572303031 (18) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (18) eap_peap: User-Name = "user001" (18) eap_peap: State = 0xa0858e68a08d9427d9ffae98230c67f7 (18) Virtual server inner-tunnel received request (18) EAP-Message = 0x020800421a0208003d319ab058f06ae820a4864bb6c4c7d9e96100000000000000008a61710780a8f4e5efe100e37b236203a29f8d469c5e1db70075736572303031 (18) FreeRADIUS-Proxied-To = 127.0.0.1 (18) User-Name = "user001" (18) State = 0xa0858e68a08d9427d9ffae98230c67f7 (18) WARNING: Outer and inner identities are the same. User privacy is compromised. (18) server inner-tunnel { (18) session-state: No cached attributes (18) # Executing section authorize from file /usr/local/radius3017/etc/raddb/sites-enabled/inner-tunnel (18) authorize { (18) policy filter_username { (18) if (&User-Name) { (18) if (&User-Name) -> TRUE (18) if (&User-Name) { (18) if (&User-Name =~ / /) { (18) if (&User-Name =~ / /) -> FALSE (18) if (&User-Name =~ /@[^@]*@/ ) { (18) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (18) if (&User-Name =~ /\.\./ ) { (18) if (&User-Name =~ /\.\./ ) -> FALSE (18) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (18) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (18) if (&User-Name =~ /\.$/) { (18) if (&User-Name =~ /\.$/) -> FALSE (18) if (&User-Name =~ /(a)\./) { (18) if (&User-Name =~ /(a)\./) -> FALSE (18) } # if (&User-Name) = notfound (18) } # policy filter_username = notfound (18) [chap] = noop (18) [mschap] = noop (18) suffix: Checking for suffix after "@" (18) suffix: No '@' in User-Name = "user001", looking up realm NULL (18) suffix: No such realm "NULL" (18) [suffix] = noop (18) update control { (18) &Proxy-To-Realm := LOCAL (18) } # update control = noop (18) eap: Peer sent EAP Response (code 2) ID 8 length 66 (18) eap: No EAP Start, assuming it's an on-going EAP conversation (18) [eap] = updated (18) [files] = noop rlm_ldap (ldap): Reserved connection (3) (18) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (18) ldap: --> (uid=user001) (18) ldap: Performing search in "dc=home" with filter "(uid=user001)", scope "sub" (18) ldap: Waiting for search result... (18) ldap: User object found at DN "uid=user001,ou=test,dc=home" (18) ldap: Processing user attributes (18) ldap: control:Password-With-Header += 'Pass@word' rlm_ldap (ldap): Released connection (3) (18) [ldap] = updated (18) [expiration] = noop (18) [logintime] = noop (18) pap: No {...} in Password-With-Header, re-writing to Cleartext-Password (18) pap: Removing &control:Password-With-Header (18) pap: WARNING: Auth-Type already set. Not setting to PAP (18) [pap] = noop (18) } # authorize = updated (18) Found Auth-Type = eap (18) # Executing group from file /usr/local/radius3017/etc/raddb/sites-enabled/inner-tunnel (18) authenticate { (18) eap: Expiring EAP session with state 0xa0858e68a08d9427 (18) eap: Finished EAP session with state 0xa0858e68a08d9427 (18) eap: Previous EAP request found for state 0xa0858e68a08d9427, released from the list (18) eap: Peer sent packet with method EAP MSCHAPv2 (26) (18) eap: Calling submodule eap_mschapv2 to process data (18) eap_mschapv2: # Executing group from file /usr/local/radius3017/etc/raddb/sites-enabled/inner-tunnel (18) eap_mschapv2: authenticate { (18) mschap: Found Cleartext-Password, hashing to create NT-Password (18) mschap: Found Cleartext-Password, hashing to create LM-Password (18) mschap: Creating challenge hash with username: user001 (18) mschap: Client is using MS-CHAPv2 (18) mschap: Adding MS-CHAPv2 MPPE keys (18) [mschap] = ok (18) } # authenticate = ok (18) MSCHAP Success (18) eap: Sending EAP Request (code 1) ID 9 length 51 (18) eap: EAP session adding &reply:State = 0xa0858e68a18c9427 (18) [eap] = handled (18) } # authenticate = handled (18) } # server inner-tunnel (18) Virtual server sending reply (18) EAP-Message = 0x010900331a0308002e533d33434145453538354230413246414543394246443837354545373032414641323238304443363134 (18) Message-Authenticator = 0x00000000000000000000000000000000 (18) State = 0xa0858e68a18c9427d9ffae98230c67f7 (18) eap_peap: Got tunneled reply code 11 (18) eap_peap: EAP-Message = 0x010900331a0308002e533d33434145453538354230413246414543394246443837354545373032414641323238304443363134 (18) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (18) eap_peap: State = 0xa0858e68a18c9427d9ffae98230c67f7 (18) eap_peap: Got tunneled reply RADIUS code 11 (18) eap_peap: EAP-Message = 0x010900331a0308002e533d33434145453538354230413246414543394246443837354545373032414641323238304443363134 (18) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (18) eap_peap: State = 0xa0858e68a18c9427d9ffae98230c67f7 (18) eap_peap: Got tunneled Access-Challenge (18) eap: Sending EAP Request (code 1) ID 9 length 91 (18) eap: EAP session adding &reply:State = 0xb09e5f13b89746da (18) [eap] = handled (18) } # authenticate = handled (18) Using Post-Auth-Type Challenge (18) # Executing group from file /usr/local/radius3017/etc/raddb/sites-enabled/default (18) Challenge { ... } # empty sub-section is ignored (18) Sent Access-Challenge Id 8 from 192.168.103.2:1812 to 192.168.103.4:55548 length 0 (18) EAP-Message = 0x0109005b19001703010050b34770cb4cd71ef70c512c1d463aee83dbdbb1b4d41a82135aa8c006e78b637121160c4b4fcbc236c1ddc806e662b70dcc53870d082877ca2b6c88a6fce035c702d36c458a406ae6003757e65de44b10 (18) Message-Authenticator = 0x00000000000000000000000000000000 (18) State = 0xb09e5f13b89746dad63a05ea128e9a97 (18) Finished request Waking up in 0.2 seconds. (19) Received Access-Request Id 9 from 192.168.103.4:55548 to 192.168.103.2:1812 length 208 (19) User-Name = "user001" (19) NAS-IP-Address = 127.0.0.1 (19) Calling-Station-Id = "02-00-00-00-00-01" (19) Framed-MTU = 1400 (19) NAS-Port-Type = Wireless-802.11 (19) Connect-Info = "CONNECT 11Mbps 802.11b" (19) EAP-Message = 0x0209005019001703010020a6ff938ffe471ed81f6cc80b903bfc6fbabc3d27dc685c3e572482516192d7ad170301002069f5245f02b8d05114f260200ec1bd58a86e3c1ba522742fcf10e04d36758845 (19) State = 0xb09e5f13b89746dad63a05ea128e9a97 (19) Message-Authenticator = 0x2942ab285c01a1f988c5b91a8571cf8b (19) session-state: No cached attributes (19) # Executing section authorize from file /usr/local/radius3017/etc/raddb/sites-enabled/default (19) authorize { (19) policy filter_username { (19) if (&User-Name) { (19) if (&User-Name) -> TRUE (19) if (&User-Name) { (19) if (&User-Name =~ / /) { (19) if (&User-Name =~ / /) -> FALSE (19) if (&User-Name =~ /@[^@]*@/ ) { (19) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (19) if (&User-Name =~ /\.\./ ) { (19) if (&User-Name =~ /\.\./ ) -> FALSE (19) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (19) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (19) if (&User-Name =~ /\.$/) { (19) if (&User-Name =~ /\.$/) -> FALSE (19) if (&User-Name =~ /(a)\./) { (19) if (&User-Name =~ /(a)\./) -> FALSE (19) } # if (&User-Name) = notfound (19) } # policy filter_username = notfound (19) [preprocess] = ok (19) [chap] = noop (19) [mschap] = noop (19) [digest] = noop (19) suffix: Checking for suffix after "@" (19) suffix: No '@' in User-Name = "user001", looking up realm NULL (19) suffix: No such realm "NULL" (19) [suffix] = noop (19) eap: Peer sent EAP Response (code 2) ID 9 length 80 (19) eap: Continuing tunnel setup (19) [eap] = ok (19) } # authorize = ok (19) Found Auth-Type = eap (19) # Executing group from file /usr/local/radius3017/etc/raddb/sites-enabled/default (19) authenticate { (19) eap: Expiring EAP session with state 0xa0858e68a18c9427 (19) eap: Finished EAP session with state 0xb09e5f13b89746da (19) eap: Previous EAP request found for state 0xb09e5f13b89746da, released from the list (19) eap: Peer sent packet with method EAP PEAP (25) (19) eap: Calling submodule eap_peap to process data (19) eap_peap: Continuing EAP-TLS (19) eap_peap: [eaptls verify] = ok (19) eap_peap: Done initial handshake (19) eap_peap: [eaptls process] = ok (19) eap_peap: Session established. Decoding tunneled attributes (19) eap_peap: PEAP state phase2 (19) eap_peap: EAP method MSCHAPv2 (26) (19) eap_peap: Got tunneled request (19) eap_peap: EAP-Message = 0x020900061a03 (19) eap_peap: Setting User-Name to user001 (19) eap_peap: Sending tunneled request to inner-tunnel (19) eap_peap: EAP-Message = 0x020900061a03 (19) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (19) eap_peap: User-Name = "user001" (19) eap_peap: State = 0xa0858e68a18c9427d9ffae98230c67f7 (19) Virtual server inner-tunnel received request (19) EAP-Message = 0x020900061a03 (19) FreeRADIUS-Proxied-To = 127.0.0.1 (19) User-Name = "user001" (19) State = 0xa0858e68a18c9427d9ffae98230c67f7 (19) WARNING: Outer and inner identities are the same. User privacy is compromised. (19) server inner-tunnel { (19) session-state: No cached attributes (19) # Executing section authorize from file /usr/local/radius3017/etc/raddb/sites-enabled/inner-tunnel (19) authorize { (19) policy filter_username { (19) if (&User-Name) { (19) if (&User-Name) -> TRUE (19) if (&User-Name) { (19) if (&User-Name =~ / /) { (19) if (&User-Name =~ / /) -> FALSE (19) if (&User-Name =~ /@[^@]*@/ ) { (19) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (19) if (&User-Name =~ /\.\./ ) { (19) if (&User-Name =~ /\.\./ ) -> FALSE (19) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (19) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (19) if (&User-Name =~ /\.$/) { (19) if (&User-Name =~ /\.$/) -> FALSE (19) if (&User-Name =~ /(a)\./) { (19) if (&User-Name =~ /(a)\./) -> FALSE (19) } # if (&User-Name) = notfound (19) } # policy filter_username = notfound (19) [chap] = noop (19) [mschap] = noop (19) suffix: Checking for suffix after "@" (19) suffix: No '@' in User-Name = "user001", looking up realm NULL (19) suffix: No such realm "NULL" (19) [suffix] = noop (19) update control { (19) &Proxy-To-Realm := LOCAL (19) } # update control = noop (19) eap: Peer sent EAP Response (code 2) ID 9 length 6 (19) eap: No EAP Start, assuming it's an on-going EAP conversation (19) [eap] = updated (19) [files] = noop rlm_ldap (ldap): Reserved connection (4) (19) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (19) ldap: --> (uid=user001) (19) ldap: Performing search in "dc=home" with filter "(uid=user001)", scope "sub" (19) ldap: Waiting for search result... (19) ldap: User object found at DN "uid=user001,ou=test,dc=home" (19) ldap: Processing user attributes (19) ldap: control:Password-With-Header += 'Pass@word' rlm_ldap (ldap): Released connection (4) (19) [ldap] = updated (19) [expiration] = noop (19) [logintime] = noop (19) pap: No {...} in Password-With-Header, re-writing to Cleartext-Password (19) pap: Removing &control:Password-With-Header (19) pap: WARNING: Auth-Type already set. Not setting to PAP (19) [pap] = noop (19) } # authorize = updated (19) Found Auth-Type = eap (19) # Executing group from file /usr/local/radius3017/etc/raddb/sites-enabled/inner-tunnel (19) authenticate { (19) eap: Expiring EAP session with state 0xa0858e68a18c9427 (19) eap: Finished EAP session with state 0xa0858e68a18c9427 (19) eap: Previous EAP request found for state 0xa0858e68a18c9427, released from the list (19) eap: Peer sent packet with method EAP MSCHAPv2 (26) (19) eap: Calling submodule eap_mschapv2 to process data (19) eap: Sending EAP Success (code 3) ID 9 length 4 (19) eap: Freeing handler (19) [eap] = ok (19) } # authenticate = ok (19) # Executing section post-auth from file /usr/local/radius3017/etc/raddb/sites-enabled/inner-tunnel (19) post-auth { (19) if (0) { (19) if (0) -> FALSE (19) } # post-auth = noop (19) Login OK: [user001] (from client all-network port 0 via TLS tunnel) (19) } # server inner-tunnel (19) Virtual server sending reply (19) MS-MPPE-Encryption-Policy = Encryption-Allowed (19) MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed (19) MS-MPPE-Send-Key = 0x5898c7bc66b836e31c303e2b268f2f02 (19) MS-MPPE-Recv-Key = 0x788fc53da9e19e5d3283e333dcc57f7d (19) EAP-Message = 0x03090004 (19) Message-Authenticator = 0x00000000000000000000000000000000 (19) User-Name = "user001" (19) eap_peap: Got tunneled reply code 2 (19) eap_peap: MS-MPPE-Encryption-Policy = Encryption-Allowed (19) eap_peap: MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed (19) eap_peap: MS-MPPE-Send-Key = 0x5898c7bc66b836e31c303e2b268f2f02 (19) eap_peap: MS-MPPE-Recv-Key = 0x788fc53da9e19e5d3283e333dcc57f7d (19) eap_peap: EAP-Message = 0x03090004 (19) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (19) eap_peap: User-Name = "user001" (19) eap_peap: Got tunneled reply RADIUS code 2 (19) eap_peap: MS-MPPE-Encryption-Policy = Encryption-Allowed (19) eap_peap: MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed (19) eap_peap: MS-MPPE-Send-Key = 0x5898c7bc66b836e31c303e2b268f2f02 (19) eap_peap: MS-MPPE-Recv-Key = 0x788fc53da9e19e5d3283e333dcc57f7d (19) eap_peap: EAP-Message = 0x03090004 (19) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (19) eap_peap: User-Name = "user001" (19) eap_peap: Tunneled authentication was successful (19) eap_peap: SUCCESS (19) eap: Sending EAP Request (code 1) ID 10 length 43 (19) eap: EAP session adding &reply:State = 0xb09e5f13b99446da (19) [eap] = handled (19) } # authenticate = handled (19) Using Post-Auth-Type Challenge (19) # Executing group from file /usr/local/radius3017/etc/raddb/sites-enabled/default (19) Challenge { ... } # empty sub-section is ignored (19) Sent Access-Challenge Id 9 from 192.168.103.2:1812 to 192.168.103.4:55548 length 0 (19) EAP-Message = 0x010a002b1900170301002043bac2d89d42a9599889993ea1f1182c435771acf065d903822369bfef8b1131 (19) Message-Authenticator = 0x00000000000000000000000000000000 (19) State = 0xb09e5f13b99446dad63a05ea128e9a97 (19) Finished request Waking up in 0.2 seconds. (20) Received Access-Request Id 10 from 192.168.103.4:55548 to 192.168.103.2:1812 length 208 (20) User-Name = "user001" (20) NAS-IP-Address = 127.0.0.1 (20) Calling-Station-Id = "02-00-00-00-00-01" (20) Framed-MTU = 1400 (20) NAS-Port-Type = Wireless-802.11 (20) Connect-Info = "CONNECT 11Mbps 802.11b" (20) EAP-Message = 0x020a005019001703010020fb506d031f3051e5306cd75d5c079ddad27fb1d82cdfb4c3368f5bbdcbd3e7031703010020f9514d556fbbf16c9b489b7b710b0c3d43930e86e0d4952319dedd8a986c56f0 (20) State = 0xb09e5f13b99446dad63a05ea128e9a97 (20) Message-Authenticator = 0xdd99c1d4930b6fa651e9357141d4a3e6 (20) session-state: No cached attributes (20) # Executing section authorize from file /usr/local/radius3017/etc/raddb/sites-enabled/default (20) authorize { (20) policy filter_username { (20) if (&User-Name) { (20) if (&User-Name) -> TRUE (20) if (&User-Name) { (20) if (&User-Name =~ / /) { (20) if (&User-Name =~ / /) -> FALSE (20) if (&User-Name =~ /@[^@]*@/ ) { (20) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (20) if (&User-Name =~ /\.\./ ) { (20) if (&User-Name =~ /\.\./ ) -> FALSE (20) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (20) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (20) if (&User-Name =~ /\.$/) { (20) if (&User-Name =~ /\.$/) -> FALSE (20) if (&User-Name =~ /(a)\./) { (20) if (&User-Name =~ /(a)\./) -> FALSE (20) } # if (&User-Name) = notfound (20) } # policy filter_username = notfound (20) [preprocess] = ok (20) [chap] = noop (20) [mschap] = noop (20) [digest] = noop (20) suffix: Checking for suffix after "@" (20) suffix: No '@' in User-Name = "user001", looking up realm NULL (20) suffix: No such realm "NULL" (20) [suffix] = noop (20) eap: Peer sent EAP Response (code 2) ID 10 length 80 (20) eap: Continuing tunnel setup (20) [eap] = ok (20) } # authorize = ok (20) Found Auth-Type = eap (20) # Executing group from file /usr/local/radius3017/etc/raddb/sites-enabled/default (20) authenticate { (20) eap: Expiring EAP session with state 0xb09e5f13b99446da (20) eap: Finished EAP session with state 0xb09e5f13b99446da (20) eap: Previous EAP request found for state 0xb09e5f13b99446da, released from the list (20) eap: Peer sent packet with method EAP PEAP (25) (20) eap: Calling submodule eap_peap to process data (20) eap_peap: Continuing EAP-TLS (20) eap_peap: [eaptls verify] = ok (20) eap_peap: Done initial handshake (20) eap_peap: [eaptls process] = ok (20) eap_peap: Session established. Decoding tunneled attributes (20) eap_peap: PEAP state send tlv success (20) eap_peap: Received EAP-TLV response (20) eap_peap: Success (20) eap: Sending EAP Success (code 3) ID 10 length 4 (20) eap: Freeing handler (20) [eap] = ok (20) } # authenticate = ok (20) # Executing section post-auth from file /usr/local/radius3017/etc/raddb/sites-enabled/default (20) post-auth { (20) update { (20) No attributes updated (20) } # update = noop (20) [exec] = noop (20) policy remove_reply_message_if_eap { (20) if (&reply:EAP-Message && &reply:Reply-Message) { (20) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (20) else { (20) [noop] = noop (20) } # else = noop (20) } # policy remove_reply_message_if_eap = noop (20) } # post-auth = noop (20) Login OK: [user001] (from client all-network port 0 cli 02-00-00-00-00-01) (20) Sent Access-Accept Id 10 from 192.168.103.2:1812 to 192.168.103.4:55548 length 0 (20) MS-MPPE-Recv-Key = 0xe1bde851c347ee67f1313da2032e61baf145aed58cb1ed25743c4cf05dd0c1ec (20) MS-MPPE-Send-Key = 0x4b3fc3fc0e8634006434001a8d3e76ab79798d5c0eabe253e7bbb972899bef90 (20) EAP-Message = 0x030a0004 (20) Message-Authenticator = 0x00000000000000000000000000000000 (20) User-Name = "user001" (20) Finished request Waking up in 0.2 seconds. (0) Cleaning up request packet ID 0 with timestamp +7 (1) Cleaning up request packet ID 1 with timestamp +7 (2) Cleaning up request packet ID 2 with timestamp +7 (3) Cleaning up request packet ID 3 with timestamp +7 (4) Cleaning up request packet ID 4 with timestamp +7 (5) Cleaning up request packet ID 5 with timestamp +7 (6) Cleaning up request packet ID 6 with timestamp +7 (7) Cleaning up request packet ID 7 with timestamp +7 (8) Cleaning up request packet ID 8 with timestamp +7 (9) Cleaning up request packet ID 9 with timestamp +7 Waking up in 4.6 seconds.

2 4

(no subject)
by Nidhal Taleb 29 Jun '18

29 Jun '18

Hi all, FreeRADIUS Version 3.0.15 here. We have a working freeradius server acting as a proxy for our customers. All customers go through the same clients pool. Clients as intended in /etc/freeradius/clients. For some new need we need to change the behavior of our server for a certain type of requests - an existing realm must now be processed locally by the server and not as a proxy -. I thought about implementing this through the use of virtual servers. It works well in our testing environment but it’s time to test it in production. The way I understand virtual servers is that they must be « declared » under the client configuration in the /etc/freeradius/clients file. The problem I am facing is that in doing so, I implement the change on all incoming authentication requests whereas I would have preferred to do so on a unique user just to be sure it would work in the production environment. Anyone has an idea? Thx

1 0

Freeradius PROXY: EAP-PEAP - TLS with NT-Password and Cleartext-Password
by Andrei Antonelli 29 Jun '18

29 Jun '18

Hi, could someone help me with the example of my configuration below? I have *Client* <---> * Wireless Controller*: MYWLAN(802.1x EAP) <---> *Freeradius.* AAA Server setting in Controller with IP: 192.168.100.3 (my internal freeradius) Freeradius *Version 3.0.16 with Mysql* *Two Freeradius servers: one HCRPP(internal) and CR(External)* radcheck attribute is *NT-Password* (HCRPP) , and the user stored in the database is without suffix. *radcheck attribute is Cleartext-Password to (CR)* *Freeradius HCRRP use EAP 802.1x and CR - PAP cleartext* *What I need is when a user authenticates without suffix or with suffix (@hcrpp.com <http://hcrpp.com>), use EAP-PEAP or TLS to authenticates in my local freeradius and if the suffix was @cr.net <http://cr.net> proxy to 126.100.20.3 with cleartext password.* When i'm logging with username and password *without suffix*, *it's works*, but when i'm logging with *suffix *like testuser(a)hcrpp.com or testuser@ cr.net i get this error message: suffix: Checking for suffix after "@" (22) suffix: Looking up realm "hcrpp.com" for User-Name = "testuser@ hcrpp.com" (22) suffix: Found realm "hcrpp.com" (22) suffix: Adding Realm = "hcrpp.com" (22) suffix: Proxying request from user testuser(a)hcrpp.com to realm hcrpp.com (22) suffix: Preparing to proxy authentication request to realm "hcrpp.com" (22) [suffix] = updated (22) update control { (22) &Proxy-To-Realm := "LOCAL" (22) } # update control = noop (22) eap: Peer sent EAP Response (code 2) ID 6 length 81 (22) eap: No EAP Start, assuming it's an on-going EAP conversation (22) [eap] = updated (22) sql: EXPAND %{User-Name} (22) sql: --> testuser(a)hcrpp.com (22) sql: SQL-User-Name set to 'testuser(a)hcrpp.com' rlm_sql (sql): Reserved connection (19) (22) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id (22) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'testuser(a)hcrpp.com' ORDER BY id (22) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'testuser(a)hcrpp.com' ORDER BY id (22) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority (22) sql: --> SELECT groupname FROM radusergroup WHERE username = ' testuser(a)hcrpp.com' ORDER BY priority (22) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = 'testuser(a)hcrpp.com' ORDER BY priority (22) sql: User not found in any groups rlm_sql (sql): Released connection (19) (22) [sql] = notfound (22) [pap] = noop (22) } # authorize = updated (22) Found Auth-Type = eap (22) # Executing group from file /usr/local/etc/raddb/sites-enabled/inner-tunnel (22) authenticate { (22) eap: Expiring EAP session with state 0xa05ae720a05cfdb8 (22) eap: Finished EAP session with state 0xa05ae720a05cfdb8 (22) eap: Previous EAP request found for state 0xa05ae720a05cfdb8, released from the list (22) eap: Peer sent packet with method EAP MSCHAPv2 (26) (22) eap: Calling submodule eap_mschapv2 to process data (22) eap_mschapv2: # Executing group from file /usr/local/etc/raddb/sites-enabled/inner-tunnel (22) eap_mschapv2: Auth-Type MS-CHAP { *(22) mschap: WARNING: No Cleartext-Password configured. Cannot create NT-Password* *(22) mschap: WARNING: No Cleartext-Password configured. Cannot create LM-Password* (22) mschap: Creating challenge hash with username: dbarcelini(a)cirp.usp.br (22) mschap: Client is using MS-CHAPv2 *(22) mschap: ERROR: FAILED: No NT/LM-Password. Cannot perform authentication* *(22) mschap: ERROR: MS-CHAP2-Response is incorrect* *My config below* *proxy.conf* home_server HCRPP { type = auth+acct ipaddr = 192.168.100.3 port = 1821 secret = XXXX require_message_authenticator = yes response_window = 20 zombie_period = 40 status_check = status-server check_interval = 30 num_answers_to_alive = 3 max_outstanding = 65536 } home_server CR { type = auth+acct ipaddr = 126.100.20.3 port = 1812 secret = XXXX } home_server_pool HCRPPOOL { type = fail-over home_server = HCRPP } home_server_pool CRPOOL { type = fail-over home_server = CR } realm hcrpp.com { auth_pool = HCRPPOOL strip } realm cr.net { auth_pool = CRPOOL nostrip } ------------------------------------------ *mods-enabled/eap* eap { default_eap_type = peap timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = ${max_requests} md5 { } * ...* ttls { tls = tls-common copy_request_to_tunnel = yes use_tunneled_reply = yes virtual_server = "inner-tunnel" peap { tls = tls-common default_eap_type = mschapv2 copy_request_to_tunnel = yes use_tunneled_reply = yes proxy_tunneled_request_as_eap = no virtual_server = "inner-tunnel" *sites-enabled/default* authorize { preprocess sql eap { ok = return updated = return } suffix *sites-enabled/inner-tunnel* authorize { suffix update control { &Proxy-To-Realm := "LOCAL" } eap { ok = return } sql Thanks

2 5

Insufficient space to store pair string
by Fabrice Durand 28 Jun '18

28 Jun '18

Hello, I use FreeRADIUS 3.0.17 and i try to fix an issue when i try to store the reply in Mysql. I use with '%{pairs:&reply:[*]}' in my sql request but the debug tell me that there is "Insufficient space to store pair string". (18) Thu Jun 28 09:43:05 2018: ERROR: sql: Insufficient space to store pair string, needed 2101 bytes have 2048 bytes Can you tell me where in the code i can raise this value ? Regards Fabrice -- Fabrice Durand fdurand(a)inverse.ca :: +1.514.447.4918 (x135) :: www.inverse.ca Inverse inc. :: Leaders behind SOGo (http://www.sogo.nu) and PacketFence (http://packetfence.org)

3 3

password is in Cleartext-Password and NOT in User-Password
by Philemon Jaomalaza 28 Jun '18

28 Jun '18

Hello Dear, I use freeradius 3 and daloradius to manage the user on SQL. When I create manually the username and do a Password-Type in Cleartext-Password, The Acces request match the good password. When I create the users from Daloradius Batch User form, the Paswword-Type is in User-Password, and no option to change it, then the Acces Request doesn't match a good password. It show PAP warning below : ......................... .......................... (3) [sql] = ok (3) [expiration] = noop (3) [logintime] = noop (3) pap: WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! (3) pap: WARNING: !!! Ignoring control:User-Password. Update your !!! (3) pap: WARNING: !!! configuration so that the "known good" clear text !!! (3) pap: WARNING: !!! password is in Cleartext-Password and NOT in !!! (3) pap: WARNING: !!! User-Password. !!! (3) pap: WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! (3) pap: WARNING: No "known good" password found for the user. Not setting Auth-Type (3) pap: WARNING: Authentication will fail unless a "known good" password is available (3) [pap] = noop (3) } # authorize = ok (3) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type = Reject (3) Failed to authenticate the user (3) Using Post-Auth-Type Reject ............................ .......................... Is this an issue on my freeradius seting ? Can I change the password type in Cleartext-Password somewhere ? How can I do to solve thie issues ? jmlz

2 2