- Freeradius-Users - lists.freeradius.org

Authenticate SuperMicro with LDAP
by luckydog xf 29 Mar '18

29 Mar '18

Hi, All, I build a LDAP and FreeRadius(Version:3.0.13), and change mods-available/ldap with ------------------------------------------ update { # Radius Dictionary LDAP control:Password-With-Header += 'userPassword' control:NT-Password := 'ntPassword' reply:Reply-Message := 'radiusReplyMessage' reply:Attr-26 := "DepartmentNumber" ------------------------------------------- Here DepartmentNumber is an attribute of uid=test, cn=users, dc=xxx,dc=com and its value is 0x483D342C20493D34(the hex-encoding of the "H=4, I=4" string.) this part is related to SuperMicro as it needs a speical packet listed here https://www.supermicro.com/support/faqs/faq.cfm?faq=22374(This is verified successfully). The rest part of LDAP is fine. but when I test, something comes up. ====================== (0) ldap: control:Password-With-Header += '{SSHA512}5Bz1gQ1mRfhuXY67ecj8XHzrnRzU/X8H0erumBdO1auZ1xTRjH22/Tz+pgC/SpS+x3x0HfVSjqt8AH0vrG5FNk33BWULZfy/' (0) ldap: WARNING: Failed parsing value "0x483D342C20493D34" for attribute Vendor-Specific: Must use 'Attr-26 = ...' instead of 'Vendor-Specific = ...' ================================ So I'm confused with it, what's wrong with my conf? BTW, a similar problem is listed here http://lists.freeradius.org/pipermail/freeradius-users/2017-November/089771… Thanks, -hongquan

3 2

unsubscribe
by R.Geller 29 Mar '18

29 Mar '18

unsubscribe

1 0

allow both /etc/freeradius/users and LDAP authentification : DETAILLED
by jean-francois MONI 29 Mar '18

29 Mar '18

Hi, sorry for my first email wich was a bit short. Here is a new one with what I'd like to achieve, my conf and the server output. Thanks to everyone involved in helping me ! :) 1. WHAT I'D LIKE TO ACHIEVE : I'd like to allow authentification for our visitors by using the USERS file at the same time. WHen I add a local user, i receive an EAP/TLS error. First, I'd like to know if if it's even possible to do so. 2. MY SERVER CONFIGURATION /etc/freeradius/radiusd.conf max_requests = 38400 auth = yes auth_badpass = yes auth_badpass = yes /etc/freeradius/clients.conf ## RESEAU WIFI client IP/24 { secret = secretpwd shortname = brocaneurocampuswifi /etc/freeradius/users ## CREATION COMPTE TEST test Cleartext-Password := "test" Reply-Message = "Hello, %{User-Name}" /etc/freeradius/modules/ntlm_auth exec ntlm_auth { wait = yes program = "/usr/bin/ntlm_auth --request-nt-key --username=%{mschap:User-Name} --password=%{User-Password}" } /etc/freeradius/sites-enabled/default and /etc/freeradius/sites-enabled/inner-tunnel authenticate { ntlm_auth ... } /etc/freeradius/users #DEFAULT Auth-Type = ntlm_auth freerad service freeradius stop usermod -a -G winbindd_priv freerad chown root:winbindd_priv /var/lib/samba/winbindd_privileged/ service freeradius start /etc/freeradius/modules/mschap with_ntdomain_hack = yes ... ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --domain=DOMAIN_NAME --username=%{mschap:User-Name} --password=%{User-Password} --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00} " /etc/freeradius/eap.conf default_eap_type = peap ... default_eap_type = mschapv2 3. MY SERVER DEBUG WHEN I TRY TO CONNECT WITH AN ACCOUNT OF THE users files. (Connection with LDAP auth works fine on laptops, iphones, android phones) Ready to process requests. rad_recv: Access-Request packet from host xx.xx.xx.1 port 59771, id=108, length=364 User-Name = "host/HOSTNAME.DOMAIN" Chargeable-User-Identity = "\001" Location-Capable = Civix-Location Calling-Station-Id = "MACADDR" Called-Station-Id = "MACADDR:SSID" NAS-Port = 8 Cisco-AVPair = "audit-session-id=xxxxxxxxxxxxxxxxx" Acct-Session-Id = "ID/xx:xx:xx:xx:xx:xx/111111111" Cisco-AVPair = "mDNS=true" NAS-IP-Address = IP NAS-Identifier = "CiscoWLC" Airespace-Wlan-Id = 11 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "152" EAP-Message = 0x00000000000000000000000000000000aaaaaaaaaaa Message-Authenticator = 0x000000000000000000000 # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] No '@' in User-Name = "host/HOSTNAME.DOMAIN", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] = noop [eap] EAP packet type response id 2 length 38 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] = updated ++[files] = noop ++[expiration] = noop ++[logintime] = noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] = noop +} # group authorize = updated Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +group authenticate { [eap] EAP Identity [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] = handled +} # group authenticate = handled Sending Access-Challenge of id 108 to IP port 59771 EAP-Message = 0x010300061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x11111111111111111111111111111111111111111 Finished request 34. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host IP port 59771, id=109, length=510 User-Name = "host/HOSTNAME.DOMAIN" Chargeable-User-Identity = "\001" Location-Capable = Civix-Location Calling-Station-Id = "MACADDR" Called-Station-Id = "MACADDR:SSID" NAS-Port = 8 Cisco-AVPair = "audit-session-id=xxxxxxxxxxxxxxxxx" Acct-Session-Id = "" Cisco-AVPair = "mDNS=true" NAS-IP-Address = 172.31.10.1 NAS-Identifier = "CiscoWLC" Airespace-Wlan-Id = 11 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "152" EAP-Message = 0x00000000000000000000000000000000 State = Message-Authenticator = # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] No '@' in User-Name = "host/HOSTNAME.DOMAIN", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] = noop [eap] EAP packet type response id 3 length 166 [eap] Continuing tunnel setup. ++[eap] = ok +} # group authorize = ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +group authenticate { [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 156 [peap] Length Included [peap] eaptls_verify returned 11 [peap] (other): before/accept initialization [peap] TLS_accept: before/accept initialization [peap] <<< TLS 1.0 Handshake [length 0097], ClientHello [peap] TLS_accept: unknown state [peap] >>> TLS 1.0 Handshake [length 0039], ServerHello [peap] TLS_accept: unknown state [peap] >>> TLS 1.0 Handshake [length 02e4], Certificate [peap] TLS_accept: unknown state [peap] >>> TLS 1.0 Handshake [length 014b], ServerKeyExchange [peap] TLS_accept: unknown state [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [peap] TLS_accept: unknown state [peap] TLS_accept: unknown state [peap] TLS_accept: Need to read more data: unknown state In SSL Handshake Phase In SSL Accept mode [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] = handled +} # group authenticate = handled Sending Access-Challenge of id 109 to 172.31.10.1 port 59771 EAP-Message = 0x00000000000000000000000000000000 EAP-Message = 0x00000000000000000000000000000000 EAP-Message = 0x00000000000000000000000000000000 EAP-Message = 0x00000000000000000000000000000000 EAP-Message = 0xbcfe187aaa8a11b59a0d6a57 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xd8dcb87ed9d8a1265676698e87672627 Finished request 35. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 172.31.10.1 port 59771, id=110, length=350 User-Name = "host/HOSTNAME.DOMAIN" Chargeable-User-Identity = "\001" Location-Capable = Civix-Location Calling-Station-Id = "MACADDR" Called-Station-Id = "MACADDR:SSID" NAS-Port = 8 Cisco-AVPair = "audit-session-id=00000000000" Acct-Session-Id = "ID/xx:xx:xx:xx:xx:xx/111111111" Cisco-AVPair = "mDNS=true" NAS-IP-Address = 172.31.10.1 NAS-Identifier = "CiscoWLC" Airespace-Wlan-Id = 11 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "152" EAP-Message = 0x020400061900 State = 0xd8dcb87ed9d8a1265676698e87672627 Message-Authenticator = 0x84bbb2c96c1d5b5500daa8aa4c6e83f9 # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] No '@' in User-Name = "host/HOSTNAME.DOMAIN", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] = noop [eap] EAP packet type response id 4 length 6 [eap] Continuing tunnel setup. ++[eap] = ok +} # group authorize = ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +group authenticate { [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] = handled +} # group authenticate = handled Sending Access-Challenge of id 110 to IP port 59771 EAP-Message = 0x00000000000000000000000000000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x00000000000000000000000000000000 Finished request 36. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 172.31.10.1 port 59771, id=111, length=361 User-Name = "host/HOSTNAME.DOMAIN" Chargeable-User-Identity = "\001" Location-Capable = Civix-Location Calling-Station-Id = "MACADDR" Called-Station-Id = "MACADDR:SSID" NAS-Port = 8 Cisco-AVPair = "audit-session-id=010a1fac007199dcc0f9bc5a" Acct-Session-Id = "ID/xx:xx:xx:xx:xx:xx/111111111" Cisco-AVPair = "mDNS=true" NAS-IP-Address = 172.31.10.1 NAS-Identifier = "CiscoWLC" Airespace-Wlan-Id = 11 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "152" EAP-Message = 0x000000000000000000000 State = 0x000000000000000000000 Message-Authenticator = 0x55471ef471cea67863dcad3682750cef # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] No '@' in User-Name = "host/HOSTNAME.DOMAIN", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] = noop [eap] EAP packet type response id 5 length 17 [eap] Continuing tunnel setup. ++[eap] = ok +} # group authorize = ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +group authenticate { [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 7 [peap] Length Included [peap] eaptls_verify returned 11 [peap] <<< TLS 1.0 Alert [length 0002], fatal unknown_ca TLS Alert read:fatal:unknown CA TLS_accept: failed in unknown state rlm_eap: SSL error error:14094418:SSL routines:SSL3_READ_BYTES:tlsv1 alert unknown ca SSL: SSL_read failed inside of TLS (-1), TLS session fails. TLS receive handshake failed during operation [peap] eaptls_process returned 4 [peap] EAPTLS_OTHERS [eap] Handler failed in EAP/peap [eap] Failed in EAP select ++[eap] = invalid +} # group authenticate = invalid Failed to authenticate the user. Login incorrect (TLS Alert read:fatal:unknown CA): [host/HOSTNAME.DOMAIN/<via Auth-Type = EAP>] (from client client_name port 8 cli MACADDR) Using Post-Auth-Type REJECT # Executing group from file /etc/freeradius/sites-enabled/default +group REJECT { [attr_filter.access_reject] expand: %{User-Name} -> host/HOSTNAME.DOMAIN attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] = updated +} # group REJECT = updated Delaying reject of request 37 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 37 Sending Access-Reject of id 111 to 172.31.10.1 port 59771 EAP-Message = 0x04050004 Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.9 seconds. Cleaning up request 34 ID 108 with timestamp +113 Cleaning up request 35 ID 109 with timestamp +113 Cleaning up request 36 ID 110 with timestamp +114 Waking up in 1.0 seconds. Cleaning up request 37 ID 111 with timestamp +114 Ready to process requests. -- Jean-François MONI Technicien Informatique Centre Broca Nouvelle-Aquitaine 146 rue Léo Saignat 33076 Bordeaux Cedex

3 2

Freeradius with LDAP, PEAP MSCHAPv2
by Robert Plestenjak 29 Mar '18

29 Mar '18

Hello, I'm trying to set up authentication over PEAP-MSCHAPv2. In LDAP I have NTLM-hashed passwords Version is 3.0.13 from CentOS 7 repository. Testing with radtest is successful: Sent Access-Request Id 72 from 0.0.0.0:36799 to 127.0.0.1:1812 length 87 User-Name = "robert_plestenjak" User-Password = "XXX" NAS-IP-Address = X.X.X.X NAS-Port = 1812 Message-Authenticator = 0x00 Cleartext-Password = "XXX" Received Access-Accept Id 72 from 127.0.0.1:1812 to 0.0.0.0:0 length 20 When I test with Wifi (Cisco Meraki), it fails: (0) Received Access-Request Id 60 from X.X.X.X:37829 to X.X.X.X:1812 length 271 (0) User-Name = "robert_plestenjak" (0) NAS-IP-Address = X.X.X.X (0) Called-Station-Id = "82-15-54-A9-EB-44:Blubber" (0) NAS-Port-Type = Wireless-802.11 (0) Service-Type = Framed-User (0) Calling-Station-Id = "18-F0-E4-3B-AA-02" (0) Connect-Info = "CONNECT 54.00 Mbps, 802.11ac, RSSI: 31, Channel: 108" (0) Acct-Session-Id = "AE4E038CE2ACDB0A" (0) Acct-Multi-Session-Id = "3F1C9E9F7EE1D184" (0) WLAN-Pairwise-Cipher = 1027076 (0) WLAN-Group-Cipher = 1027076 (0) WLAN-AKM-Suite = 1027073 (0) Meraki-Device-Name = "olai" (0) Framed-MTU = 1400 (0) EAP-Message = 0x0229001601726f626572745f706c657374656e6a616b (0) Message-Authenticator = 0x0a1c310be4f79d6acca1eb4a67deb60e (0) # Executing section authorize from file /etc/raddb/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "robert_plestenjak", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 41 length 22 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/raddb/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_md5 to process data (0) eap_md5: Issuing MD5 Challenge (0) eap: Sending EAP Request (code 1) ID 42 length 22 (0) eap: EAP session adding &reply:State = 0x46c8d21046e2d6bc (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) # Executing group from file /etc/raddb/sites-enabled/default (0) Challenge { ... } # empty sub-section is ignored (0) Sent Access-Challenge Id 60 from X.X.X.X:1812 to X.X.X.X:37829 length 0 (0) EAP-Message = 0x012a00160410dddf52a2d853bc9017a6c96d00a0b389 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0x46c8d21046e2d6bc6e5900b0d6f9d128 (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 61 from X.X.X.X:37829 to X.X.X.X:1812 length 273 (1) User-Name = "robert_plestenjak" (1) NAS-IP-Address = X.X.X.X (1) Called-Station-Id = "82-15-54-A9-EB-44:Blubber" (1) NAS-Port-Type = Wireless-802.11 (1) Service-Type = Framed-User (1) Calling-Station-Id = "18-F0-E4-3B-AA-02" (1) Connect-Info = "CONNECT 54.00 Mbps, 802.11ac, RSSI: 31, Channel: 108" (1) Acct-Session-Id = "AE4E038CE2ACDB0A" (1) Acct-Multi-Session-Id = "3F1C9E9F7EE1D184" (1) WLAN-Pairwise-Cipher = 1027076 (1) WLAN-Group-Cipher = 1027076 (1) WLAN-AKM-Suite = 1027073 (1) Meraki-Device-Name = "olai" (1) Framed-MTU = 1400 (1) EAP-Message = 0x022a00060319 (1) State = 0x46c8d21046e2d6bc6e5900b0d6f9d128 (1) Message-Authenticator = 0xd3ffb74c0af4b8f5b52afbf18d82b8d2 (1) session-state: No cached attributes (1) # Executing section authorize from file /etc/raddb/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /(a)\./) { (1) if (&User-Name =~ /(a)\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "robert_plestenjak", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 42 length 6 (1) eap: No EAP Start, assuming it's an on-going EAP conversation (1) [eap] = updated (1) [files] = noop rlm_ldap (ldap): Reserved connection (0) (1) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (1) ldap: --> (uid=robert_plestenjak) (1) ldap: Performing search in "dc=xlab,dc=si" with filter "(uid=robert_plestenjak)", scope "sub" (1) ldap: Waiting for search result... (1) ldap: User object found at DN "cn=Robert Plestenjak,ou=people,ou=xlab-research,dc=xlab,dc=si" (1) ldap: Processing user attributes (1) ldap: control:Password-With-Header += 'XXX' rlm_ldap (ldap): Released connection (0) Need 5 more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots used rlm_ldap (ldap): Connecting to ldaps://auth3.xlab.si:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (1) [ldap] = updated (1) if ((ok || updated) && User-Password) { (1) if ((ok || updated) && User-Password) -> FALSE (1) [expiration] = noop (1) [logintime] = noop (1) pap: No {...} in Password-With-Header, re-writing to Cleartext-Password (1) pap: Removing &control:Password-With-Header (1) pap: WARNING: Auth-Type already set. Not setting to PAP (1) [pap] = noop (1) } # authorize = updated (1) Found Auth-Type = eap (1) # Executing group from file /etc/raddb/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0x46c8d21046e2d6bc (1) eap: Finished EAP session with state 0x46c8d21046e2d6bc (1) eap: Previous EAP request found for state 0x46c8d21046e2d6bc, released from the list (1) eap: Peer sent packet with method EAP NAK (3) (1) eap: Found mutually acceptable type PEAP (25) (1) eap: Calling submodule eap_peap to process data (1) eap_peap: Initiating new EAP-TLS session (1) eap_peap: [eaptls start] = request (1) eap: Sending EAP Request (code 1) ID 43 length 6 (1) eap: EAP session adding &reply:State = 0x46c8d21047e3cbbc (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) # Executing group from file /etc/raddb/sites-enabled/default (1) Challenge { ... } # empty sub-section is ignored (1) Sent Access-Challenge Id 61 from X.X.X.X:1812 to X.X.X.X:37829 length 0 (1) EAP-Message = 0x012b00061920 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0x46c8d21047e3cbbc6e5900b0d6f9d128 (1) Finished request Waking up in 4.9 seconds. (2) Received Access-Request Id 62 from X.X.X.X:37829 to X.X.X.X:1812 length 416 (2) User-Name = "robert_plestenjak" (2) NAS-IP-Address = X.X.X.X (2) Called-Station-Id = "82-15-54-A9-EB-44:Blubber" (2) NAS-Port-Type = Wireless-802.11 (2) Service-Type = Framed-User (2) Calling-Station-Id = "18-F0-E4-3B-AA-02" (2) Connect-Info = "CONNECT 54.00 Mbps, 802.11ac, RSSI: 31, Channel: 108" (2) Acct-Session-Id = "AE4E038CE2ACDB0A" (2) Acct-Multi-Session-Id = "3F1C9E9F7EE1D184" (2) WLAN-Pairwise-Cipher = 1027076 (2) WLAN-Group-Cipher = 1027076 (2) WLAN-AKM-Suite = 1027073 (2) Meraki-Device-Name = "olai" (2) Framed-MTU = 1400 (2) EAP-Message = 0x022b009519800000008b160301008601000082030318104905101d0258ca25ae0986254aedf90b1c8fdf08e710e17c259b38fd5ad000002ac02bc02fc02cc030cca9cca8c009c023c013c027c00ac024c014c028009c009d002f003c0035003d000a0100002fff0100010000170000000d0010000e0403 (2) State = 0x46c8d21047e3cbbc6e5900b0d6f9d128 (2) Message-Authenticator = 0x8d7c5c5560d235684aceeb01ee99f66b (2) session-state: No cached attributes (2) # Executing section authorize from file /etc/raddb/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /(a)\./) { (2) if (&User-Name =~ /(a)\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "robert_plestenjak", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 43 length 149 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = eap (2) # Executing group from file /etc/raddb/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0x46c8d21047e3cbbc (2) eap: Finished EAP session with state 0x46c8d21047e3cbbc (2) eap: Previous EAP request found for state 0x46c8d21047e3cbbc, released from the list (2) eap: Peer sent packet with method EAP PEAP (25) (2) eap: Calling submodule eap_peap to process data (2) eap_peap: Continuing EAP-TLS (2) eap_peap: Peer indicated complete TLS record size will be 139 bytes (2) eap_peap: Got complete TLS record (139 bytes) (2) eap_peap: [eaptls verify] = length included (2) eap_peap: (other): before/accept initialization (2) eap_peap: TLS_accept: before/accept initialization (2) eap_peap: <<< recv TLS 1.2 [length 0086] (2) eap_peap: TLS_accept: SSLv3 read client hello A (2) eap_peap: >>> send TLS 1.2 [length 0039] (2) eap_peap: TLS_accept: SSLv3 write server hello A (2) eap_peap: >>> send TLS 1.2 [length 08d3] (2) eap_peap: TLS_accept: SSLv3 write certificate A (2) eap_peap: >>> send TLS 1.2 [length 014d] (2) eap_peap: TLS_accept: SSLv3 write key exchange A (2) eap_peap: >>> send TLS 1.2 [length 0004] (2) eap_peap: TLS_accept: SSLv3 write server done A (2) eap_peap: TLS_accept: SSLv3 flush data (2) eap_peap: TLS_accept: SSLv3 read client certificate A (2) eap_peap: TLS_accept: Need to read more data: SSLv3 read client key exchange A (2) eap_peap: TLS_accept: Need to read more data: SSLv3 read client key exchange A (2) eap_peap: In SSL Handshake Phase (2) eap_peap: In SSL Accept mode (2) eap_peap: [eaptls process] = handled (2) eap: Sending EAP Request (code 1) ID 44 length 1004 (2) eap: EAP session adding &reply:State = 0x46c8d21044e4cbbc (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) # Executing group from file /etc/raddb/sites-enabled/default (2) Challenge { ... } # empty sub-section is ignored (2) Sent Access-Challenge Id 62 from X.X.X.X:1812 to X.X.X.X:37829 length 0 (2) EAP-Message = 0x012c03ec19c000000a711603030039020000350303ea32a5d7a1bbfdbf9e7ee34e29050563b1ffc93c77c2247fb4634b9936ff065600c02f00000dff01000100000b00040300010216030308d30b0008cf0008cc0003de308203da308202c2a003020102020101300d06092a864886f70d01010b050030 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0x46c8d21044e4cbbc6e5900b0d6f9d128 (2) Finished request Waking up in 4.9 seconds. (3) Received Access-Request Id 63 from X.X.X.X:37829 to X.X.X.X:1812 length 273 (3) User-Name = "robert_plestenjak" (3) NAS-IP-Address = X.X.X.X (3) Called-Station-Id = "82-15-54-A9-EB-44:Blubber" (3) NAS-Port-Type = Wireless-802.11 (3) Service-Type = Framed-User (3) Calling-Station-Id = "18-F0-E4-3B-AA-02" (3) Connect-Info = "CONNECT 54.00 Mbps, 802.11ac, RSSI: 31, Channel: 108" (3) Acct-Session-Id = "AE4E038CE2ACDB0A" (3) Acct-Multi-Session-Id = "3F1C9E9F7EE1D184" (3) WLAN-Pairwise-Cipher = 1027076 (3) WLAN-Group-Cipher = 1027076 (3) WLAN-AKM-Suite = 1027073 (3) Meraki-Device-Name = "olai" (3) Framed-MTU = 1400 (3) EAP-Message = 0x022c00061900 (3) State = 0x46c8d21044e4cbbc6e5900b0d6f9d128 (3) Message-Authenticator = 0x44ed2c1a2c57511fb51626d94cea998d (3) session-state: No cached attributes (3) # Executing section authorize from file /etc/raddb/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /(a)\./) { (3) if (&User-Name =~ /(a)\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "robert_plestenjak", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 44 length 6 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /etc/raddb/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0x46c8d21044e4cbbc (3) eap: Finished EAP session with state 0x46c8d21044e4cbbc (3) eap: Previous EAP request found for state 0x46c8d21044e4cbbc, released from the list (3) eap: Peer sent packet with method EAP PEAP (25) (3) eap: Calling submodule eap_peap to process data (3) eap_peap: Continuing EAP-TLS (3) eap_peap: Peer ACKed our handshake fragment (3) eap_peap: [eaptls verify] = request (3) eap_peap: [eaptls process] = handled (3) eap: Sending EAP Request (code 1) ID 45 length 1000 (3) eap: EAP session adding &reply:State = 0x46c8d21045e5cbbc (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) # Executing group from file /etc/raddb/sites-enabled/default (3) Challenge { ... } # empty sub-section is ignored (3) Sent Access-Challenge Id 63 from X.X.X.X:1812 to X.X.X.X:37829 length 0 (3) EAP-Message = 0x012d03e819402dbdf62800fd47c44b6189df90644cc345df23b390e938143137414b4dc3906a2aefff96f82551639cf9a10ead226ee8a9d0d7c4bf51bcca698315290b7a181527f2841445909d7d420004e8308204e4308203cca003020102020900d20da3179fcff6af300d06092a864886f70d01010b (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0x46c8d21045e5cbbc6e5900b0d6f9d128 (3) Finished request Waking up in 4.9 seconds. (4) Received Access-Request Id 64 from X.X.X.X:37829 to X.X.X.X:1812 length 273 (4) User-Name = "robert_plestenjak" (4) NAS-IP-Address = X.X.X.X (4) Called-Station-Id = "82-15-54-A9-EB-44:Blubber" (4) NAS-Port-Type = Wireless-802.11 (4) Service-Type = Framed-User (4) Calling-Station-Id = "18-F0-E4-3B-AA-02" (4) Connect-Info = "CONNECT 54.00 Mbps, 802.11ac, RSSI: 31, Channel: 108" (4) Acct-Session-Id = "AE4E038CE2ACDB0A" (4) Acct-Multi-Session-Id = "3F1C9E9F7EE1D184" (4) WLAN-Pairwise-Cipher = 1027076 (4) WLAN-Group-Cipher = 1027076 (4) WLAN-AKM-Suite = 1027073 (4) Meraki-Device-Name = "olai" (4) Framed-MTU = 1400 (4) EAP-Message = 0x022d00061900 (4) State = 0x46c8d21045e5cbbc6e5900b0d6f9d128 (4) Message-Authenticator = 0xa82ea1907b66b0e0486d7358963589a7 (4) session-state: No cached attributes (4) # Executing section authorize from file /etc/raddb/sites-enabled/default (4) authorize { (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /(a)\./) { (4) if (&User-Name =~ /(a)\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "robert_plestenjak", looking up realm NULL (4) suffix: No such realm "NULL" (4) [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 45 length 6 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /etc/raddb/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0x46c8d21045e5cbbc (4) eap: Finished EAP session with state 0x46c8d21045e5cbbc (4) eap: Previous EAP request found for state 0x46c8d21045e5cbbc, released from the list (4) eap: Peer sent packet with method EAP PEAP (25) (4) eap: Calling submodule eap_peap to process data (4) eap_peap: Continuing EAP-TLS (4) eap_peap: Peer ACKed our handshake fragment (4) eap_peap: [eaptls verify] = request (4) eap_peap: [eaptls process] = handled (4) eap: Sending EAP Request (code 1) ID 46 length 691 (4) eap: EAP session adding &reply:State = 0x46c8d21042e6cbbc (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) # Executing group from file /etc/raddb/sites-enabled/default (4) Challenge { ... } # empty sub-section is ignored (4) Sent Access-Challenge Id 64 from X.X.X.X:1812 to X.X.X.X:37829 length 0 (4) EAP-Message = 0x012e02b319000530030101ff30360603551d1f042f302d302ba029a0278625687474703a2f2f7777772e6578616d706c652e6f72672f6578616d706c655f63612e63726c300d06092a864886f70d01010b0500038201010082ec17a6a7053cdb07445b2a8258e5e5f0cad094486cb4a81527d41f7ff73f (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0x46c8d21042e6cbbc6e5900b0d6f9d128 (4) Finished request Waking up in 4.9 seconds. (5) Received Access-Request Id 65 from X.X.X.X:37829 to X.X.X.X:1812 length 403 (5) User-Name = "robert_plestenjak" (5) NAS-IP-Address = X.X.X.X (5) Called-Station-Id = "82-15-54-A9-EB-44:Blubber" (5) NAS-Port-Type = Wireless-802.11 (5) Service-Type = Framed-User (5) Calling-Station-Id = "18-F0-E4-3B-AA-02" (5) Connect-Info = "CONNECT 54.00 Mbps, 802.11ac, RSSI: 31, Channel: 108" (5) Acct-Session-Id = "AE4E038CE2ACDB0A" (5) Acct-Multi-Session-Id = "3F1C9E9F7EE1D184" (5) WLAN-Pairwise-Cipher = 1027076 (5) WLAN-Group-Cipher = 1027076 (5) WLAN-AKM-Suite = 1027073 (5) Meraki-Device-Name = "olai" (5) Framed-MTU = 1400 (5) EAP-Message = 0x022e008819800000007e1603030046100000424104fb2e08dfc5eb824bcf64fbb8ff77906d79826239bbc5ff15023c4371596d0422c7ea05f73a3fdffa848b11c8d757eba23c64302d202b63022e12e35a6f23fc48140303000101160303002800000000000000005b6195d7b05366d7ac3d11cf44f77c (5) State = 0x46c8d21042e6cbbc6e5900b0d6f9d128 (5) Message-Authenticator = 0xcdb102cb862715a789a736e630c4b31f (5) session-state: No cached attributes (5) # Executing section authorize from file /etc/raddb/sites-enabled/default (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /(a)\./) { (5) if (&User-Name =~ /(a)\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) [chap] = noop (5) [mschap] = noop (5) [digest] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "robert_plestenjak", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) eap: Peer sent EAP Response (code 2) ID 46 length 136 (5) eap: Continuing tunnel setup (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /etc/raddb/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0x46c8d21042e6cbbc (5) eap: Finished EAP session with state 0x46c8d21042e6cbbc (5) eap: Previous EAP request found for state 0x46c8d21042e6cbbc, released from the list (5) eap: Peer sent packet with method EAP PEAP (25) (5) eap: Calling submodule eap_peap to process data (5) eap_peap: Continuing EAP-TLS (5) eap_peap: Peer indicated complete TLS record size will be 126 bytes (5) eap_peap: Got complete TLS record (126 bytes) (5) eap_peap: [eaptls verify] = length included (5) eap_peap: <<< recv TLS 1.2 [length 0046] (5) eap_peap: TLS_accept: SSLv3 read client key exchange A (5) eap_peap: TLS_accept: SSLv3 read certificate verify A (5) eap_peap: <<< recv TLS 1.2 [length 0001] (5) eap_peap: <<< recv TLS 1.2 [length 0010] (5) eap_peap: TLS_accept: SSLv3 read finished A (5) eap_peap: >>> send TLS 1.2 [length 0001] (5) eap_peap: TLS_accept: SSLv3 write change cipher spec A (5) eap_peap: >>> send TLS 1.2 [length 0010] (5) eap_peap: TLS_accept: SSLv3 write finished A (5) eap_peap: TLS_accept: SSLv3 flush data (5) eap_peap: (other): SSL negotiation finished successfully (5) eap_peap: SSL Connection Established (5) eap_peap: [eaptls process] = handled (5) eap: Sending EAP Request (code 1) ID 47 length 57 (5) eap: EAP session adding &reply:State = 0x46c8d21043e7cbbc (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) # Executing group from file /etc/raddb/sites-enabled/default (5) Challenge { ... } # empty sub-section is ignored (5) Sent Access-Challenge Id 65 from X.X.X.X:1812 to X.X.X.X:37829 length 0 (5) EAP-Message = 0x012f003919001403030001011603030028652f3ff10fb2c5ec7eaba85c96965e3cdaebaab760ef337bdf697193d7580a6381d9bc98fce6eb16 (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0x46c8d21043e7cbbc6e5900b0d6f9d128 (5) Finished request Waking up in 4.9 seconds. (6) Received Access-Request Id 66 from X.X.X.X:37829 to X.X.X.X:1812 length 273 (6) User-Name = "robert_plestenjak" (6) NAS-IP-Address = X.X.X.X (6) Called-Station-Id = "82-15-54-A9-EB-44:Blubber" (6) NAS-Port-Type = Wireless-802.11 (6) Service-Type = Framed-User (6) Calling-Station-Id = "18-F0-E4-3B-AA-02" (6) Connect-Info = "CONNECT 54.00 Mbps, 802.11ac, RSSI: 31, Channel: 108" (6) Acct-Session-Id = "AE4E038CE2ACDB0A" (6) Acct-Multi-Session-Id = "3F1C9E9F7EE1D184" (6) WLAN-Pairwise-Cipher = 1027076 (6) WLAN-Group-Cipher = 1027076 (6) WLAN-AKM-Suite = 1027073 (6) Meraki-Device-Name = "olai" (6) Framed-MTU = 1400 (6) EAP-Message = 0x022f00061900 (6) State = 0x46c8d21043e7cbbc6e5900b0d6f9d128 (6) Message-Authenticator = 0xf613e30b444fdc6251b89176c4ea98e3 (6) session-state: No cached attributes (6) # Executing section authorize from file /etc/raddb/sites-enabled/default (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /(a)\./) { (6) if (&User-Name =~ /(a)\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [preprocess] = ok (6) [chap] = noop (6) [mschap] = noop (6) [digest] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "robert_plestenjak", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) eap: Peer sent EAP Response (code 2) ID 47 length 6 (6) eap: Continuing tunnel setup (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /etc/raddb/sites-enabled/default (6) authenticate { (6) eap: Expiring EAP session with state 0x46c8d21043e7cbbc (6) eap: Finished EAP session with state 0x46c8d21043e7cbbc (6) eap: Previous EAP request found for state 0x46c8d21043e7cbbc, released from the list (6) eap: Peer sent packet with method EAP PEAP (25) (6) eap: Calling submodule eap_peap to process data (6) eap_peap: Continuing EAP-TLS (6) eap_peap: Peer ACKed our handshake fragment. handshake is finished (6) eap_peap: [eaptls verify] = success (6) eap_peap: [eaptls process] = success (6) eap_peap: Session established. Decoding tunneled attributes (6) eap_peap: PEAP state TUNNEL ESTABLISHED (6) eap: Sending EAP Request (code 1) ID 48 length 40 (6) eap: EAP session adding &reply:State = 0x46c8d21040f8cbbc (6) [eap] = handled (6) } # authenticate = handled (6) Using Post-Auth-Type Challenge (6) # Executing group from file /etc/raddb/sites-enabled/default (6) Challenge { ... } # empty sub-section is ignored (6) Sent Access-Challenge Id 66 from X.X.X.X:1812 to X.X.X.X:37829 length 0 (6) EAP-Message = 0x013000281900170303001d652f3ff10fb2c5edc396f1fb96534d5a09ed3bd8844d3cb98c691e6cdd (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0x46c8d21040f8cbbc6e5900b0d6f9d128 (6) Finished request Waking up in 4.9 seconds. (7) Received Access-Request Id 67 from X.X.X.X:37829 to X.X.X.X:1812 length 320 (7) User-Name = "robert_plestenjak" (7) NAS-IP-Address = X.X.X.X (7) Called-Station-Id = "82-15-54-A9-EB-44:Blubber" (7) NAS-Port-Type = Wireless-802.11 (7) Service-Type = Framed-User (7) Calling-Station-Id = "18-F0-E4-3B-AA-02" (7) Connect-Info = "CONNECT 54.00 Mbps, 802.11ac, RSSI: 31, Channel: 108" (7) Acct-Session-Id = "AE4E038CE2ACDB0A" (7) Acct-Multi-Session-Id = "3F1C9E9F7EE1D184" (7) WLAN-Pairwise-Cipher = 1027076 (7) WLAN-Group-Cipher = 1027076 (7) WLAN-AKM-Suite = 1027073 (7) Meraki-Device-Name = "olai" (7) Framed-MTU = 1400 (7) EAP-Message = 0x023000351900170303002a000000000000000125e0edd772c07188d67f8ac17c95b08291f4d8ee740ac579a17566729c283e4de6c8 (7) State = 0x46c8d21040f8cbbc6e5900b0d6f9d128 (7) Message-Authenticator = 0x12f53a0a6021756bf2a6b2fc55a901a3 (7) session-state: No cached attributes (7) # Executing section authorize from file /etc/raddb/sites-enabled/default (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /(a)\./) { (7) if (&User-Name =~ /(a)\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [preprocess] = ok (7) [chap] = noop (7) [mschap] = noop (7) [digest] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "robert_plestenjak", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) eap: Peer sent EAP Response (code 2) ID 48 length 53 (7) eap: Continuing tunnel setup (7) [eap] = ok (7) } # authorize = ok (7) Found Auth-Type = eap (7) # Executing group from file /etc/raddb/sites-enabled/default (7) authenticate { (7) eap: Expiring EAP session with state 0x46c8d21040f8cbbc (7) eap: Finished EAP session with state 0x46c8d21040f8cbbc (7) eap: Previous EAP request found for state 0x46c8d21040f8cbbc, released from the list (7) eap: Peer sent packet with method EAP PEAP (25) (7) eap: Calling submodule eap_peap to process data (7) eap_peap: Continuing EAP-TLS (7) eap_peap: [eaptls verify] = ok (7) eap_peap: Done initial handshake (7) eap_peap: [eaptls process] = ok (7) eap_peap: Session established. Decoding tunneled attributes (7) eap_peap: PEAP state WAITING FOR INNER IDENTITY (7) eap_peap: Identity - robert_plestenjak (7) eap_peap: Got inner identity 'robert_plestenjak' (7) eap_peap: Setting default EAP type for tunneled EAP session (7) eap_peap: Got tunneled request (7) eap_peap: EAP-Message = 0x0230001601726f626572745f706c657374656e6a616b (7) eap_peap: Setting User-Name to robert_plestenjak (7) eap_peap: Sending tunneled request to inner-tunnel (7) eap_peap: EAP-Message = 0x0230001601726f626572745f706c657374656e6a616b (7) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (7) eap_peap: User-Name = "robert_plestenjak" (7) Virtual server inner-tunnel received request (7) EAP-Message = 0x0230001601726f626572745f706c657374656e6a616b (7) FreeRADIUS-Proxied-To = 127.0.0.1 (7) User-Name = "robert_plestenjak" (7) WARNING: Outer and inner identities are the same. User privacy is compromised. (7) server inner-tunnel { (7) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /(a)\./) { (7) if (&User-Name =~ /(a)\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [chap] = noop (7) [mschap] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "robert_plestenjak", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) update control { (7) &Proxy-To-Realm := LOCAL (7) } # update control = noop (7) eap: Peer sent EAP Response (code 2) ID 48 length 22 (7) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (7) [eap] = ok (7) } # authorize = ok (7) Found Auth-Type = eap (7) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (7) authenticate { (7) eap: Peer sent packet with method EAP Identity (1) (7) eap: Calling submodule eap_mschapv2 to process data (7) eap_mschapv2: Issuing Challenge (7) eap: Sending EAP Request (code 1) ID 49 length 43 (7) eap: EAP session adding &reply:State = 0xb9b0a1f1b981bb6e (7) [eap] = handled (7) } # authenticate = handled (7) } # server inner-tunnel (7) Virtual server sending reply (7) EAP-Message = 0x0131002b1a0131002610c55413e285b325a381cfe991245249f6667265657261646975732d332e302e3133 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0xb9b0a1f1b981bb6ee399006fef12b2ad (7) eap_peap: Got tunneled reply code 11 (7) eap_peap: EAP-Message = 0x0131002b1a0131002610c55413e285b325a381cfe991245249f6667265657261646975732d332e302e3133 (7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_peap: State = 0xb9b0a1f1b981bb6ee399006fef12b2ad (7) eap_peap: Got tunneled reply RADIUS code 11 (7) eap_peap: EAP-Message = 0x0131002b1a0131002610c55413e285b325a381cfe991245249f6667265657261646975732d332e302e3133 (7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_peap: State = 0xb9b0a1f1b981bb6ee399006fef12b2ad (7) eap_peap: Got tunneled Access-Challenge (7) eap: Sending EAP Request (code 1) ID 49 length 74 (7) eap: EAP session adding &reply:State = 0x46c8d21041f9cbbc (7) [eap] = handled (7) } # authenticate = handled (7) Using Post-Auth-Type Challenge (7) # Executing group from file /etc/raddb/sites-enabled/default (7) Challenge { ... } # empty sub-section is ignored (7) Sent Access-Challenge Id 67 from X.X.X.X:1812 to X.X.X.X:37829 length 0 (7) EAP-Message = 0x0131004a1900170303003f652f3ff10fb2c5ee7d1dc7c9e2a8eab376bcf614675fc6b749d9d35b70d018df036218eb66b192f7a667d1512441f23b4b8ed103e7e51abcc1ccb629d4b709 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0x46c8d21041f9cbbc6e5900b0d6f9d128 (7) Finished request Waking up in 4.9 seconds. (8) Received Access-Request Id 68 from X.X.X.X:37829 to X.X.X.X:1812 length 374 (8) User-Name = "robert_plestenjak" (8) NAS-IP-Address = X.X.X.X (8) Called-Station-Id = "82-15-54-A9-EB-44:Blubber" (8) NAS-Port-Type = Wireless-802.11 (8) Service-Type = Framed-User (8) Calling-Station-Id = "18-F0-E4-3B-AA-02" (8) Connect-Info = "CONNECT 54.00 Mbps, 802.11ac, RSSI: 31, Channel: 108" (8) Acct-Session-Id = "AE4E038CE2ACDB0A" (8) Acct-Multi-Session-Id = "3F1C9E9F7EE1D184" (8) WLAN-Pairwise-Cipher = 1027076 (8) WLAN-Group-Cipher = 1027076 (8) WLAN-AKM-Suite = 1027073 (8) Meraki-Device-Name = "olai" (8) Framed-MTU = 1400 (8) EAP-Message = 0x0231006b1900170303006000000000000000023889c5f8167aca23ac8159b1f565ea917ee16b989cfa799eec8b81911bc2fd6c32b4c44cd11d900a80376691793a616e041565552c1f286df0b04e830cc018dea39f6666cf1486ce3f36872ee5611b78130639007839772d (8) State = 0x46c8d21041f9cbbc6e5900b0d6f9d128 (8) Message-Authenticator = 0xd7d29fba79fdde7e4401eef1926543e4 (8) session-state: No cached attributes (8) # Executing section authorize from file /etc/raddb/sites-enabled/default (8) authorize { (8) policy filter_username { (8) if (&User-Name) { (8) if (&User-Name) -> TRUE (8) if (&User-Name) { (8) if (&User-Name =~ / /) { (8) if (&User-Name =~ / /) -> FALSE (8) if (&User-Name =~ /@[^@]*@/ ) { (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (8) if (&User-Name =~ /\.\./ ) { (8) if (&User-Name =~ /\.\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\.$/) { (8) if (&User-Name =~ /\.$/) -> FALSE (8) if (&User-Name =~ /(a)\./) { (8) if (&User-Name =~ /(a)\./) -> FALSE (8) } # if (&User-Name) = notfound (8) } # policy filter_username = notfound (8) [preprocess] = ok (8) [chap] = noop (8) [mschap] = noop (8) [digest] = noop (8) suffix: Checking for suffix after "@" (8) suffix: No '@' in User-Name = "robert_plestenjak", looking up realm NULL (8) suffix: No such realm "NULL" (8) [suffix] = noop (8) eap: Peer sent EAP Response (code 2) ID 49 length 107 (8) eap: Continuing tunnel setup (8) [eap] = ok (8) } # authorize = ok (8) Found Auth-Type = eap (8) # Executing group from file /etc/raddb/sites-enabled/default (8) authenticate { (8) eap: Expiring EAP session with state 0xb9b0a1f1b981bb6e (8) eap: Finished EAP session with state 0x46c8d21041f9cbbc (8) eap: Previous EAP request found for state 0x46c8d21041f9cbbc, released from the list (8) eap: Peer sent packet with method EAP PEAP (25) (8) eap: Calling submodule eap_peap to process data (8) eap_peap: Continuing EAP-TLS (8) eap_peap: [eaptls verify] = ok (8) eap_peap: Done initial handshake (8) eap_peap: [eaptls process] = ok (8) eap_peap: Session established. Decoding tunneled attributes (8) eap_peap: PEAP state phase2 (8) eap_peap: EAP method MSCHAPv2 (26) (8) eap_peap: Got tunneled request (8) eap_peap: EAP-Message = 0x0231004c1a023100473134d1e890f521ae70fbd338821cf2707b0000000000000000eeae867724f7f70ac517e7c1d96c26cb95f034fbd44e93dd00726f626572745f706c657374656e6a616b (8) eap_peap: Setting User-Name to robert_plestenjak (8) eap_peap: Sending tunneled request to inner-tunnel (8) eap_peap: EAP-Message = 0x0231004c1a023100473134d1e890f521ae70fbd338821cf2707b0000000000000000eeae867724f7f70ac517e7c1d96c26cb95f034fbd44e93dd00726f626572745f706c657374656e6a616b (8) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (8) eap_peap: User-Name = "robert_plestenjak" (8) eap_peap: State = 0xb9b0a1f1b981bb6ee399006fef12b2ad (8) Virtual server inner-tunnel received request (8) EAP-Message = 0x0231004c1a023100473134d1e890f521ae70fbd338821cf2707b0000000000000000eeae867724f7f70ac517e7c1d96c26cb95f034fbd44e93dd00726f626572745f706c657374656e6a616b (8) FreeRADIUS-Proxied-To = 127.0.0.1 (8) User-Name = "robert_plestenjak" (8) State = 0xb9b0a1f1b981bb6ee399006fef12b2ad (8) WARNING: Outer and inner identities are the same. User privacy is compromised. (8) server inner-tunnel { (8) session-state: No cached attributes (8) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel (8) authorize { (8) policy filter_username { (8) if (&User-Name) { (8) if (&User-Name) -> TRUE (8) if (&User-Name) { (8) if (&User-Name =~ / /) { (8) if (&User-Name =~ / /) -> FALSE (8) if (&User-Name =~ /@[^@]*@/ ) { (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (8) if (&User-Name =~ /\.\./ ) { (8) if (&User-Name =~ /\.\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\.$/) { (8) if (&User-Name =~ /\.$/) -> FALSE (8) if (&User-Name =~ /(a)\./) { (8) if (&User-Name =~ /(a)\./) -> FALSE (8) } # if (&User-Name) = notfound (8) } # policy filter_username = notfound (8) [chap] = noop (8) [mschap] = noop (8) suffix: Checking for suffix after "@" (8) suffix: No '@' in User-Name = "robert_plestenjak", looking up realm NULL (8) suffix: No such realm "NULL" (8) [suffix] = noop (8) update control { (8) &Proxy-To-Realm := LOCAL (8) } # update control = noop (8) eap: Peer sent EAP Response (code 2) ID 49 length 76 (8) eap: No EAP Start, assuming it's an on-going EAP conversation (8) [eap] = updated (8) [files] = noop rlm_ldap (ldap): Reserved connection (1) (8) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (8) ldap: --> (uid=robert_plestenjak) (8) ldap: Performing search in "dc=xlab,dc=si" with filter "(uid=robert_plestenjak)", scope "sub" (8) ldap: Waiting for search result... (8) ldap: User object found at DN "cn=Robert Plestenjak,ou=people,ou=xlab-research,dc=xlab,dc=si" (8) ldap: Processing user attributes (8) ldap: control:Password-With-Header += 'XXX' rlm_ldap (ldap): Released connection (1) (8) [ldap] = updated (8) [expiration] = noop (8) [logintime] = noop (8) pap: No {...} in Password-With-Header, re-writing to Cleartext-Password (8) pap: Removing &control:Password-With-Header (8) pap: WARNING: Auth-Type already set. Not setting to PAP (8) [pap] = noop (8) } # authorize = updated (8) Found Auth-Type = eap (8) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (8) authenticate { (8) eap: Expiring EAP session with state 0xb9b0a1f1b981bb6e (8) eap: Finished EAP session with state 0xb9b0a1f1b981bb6e (8) eap: Previous EAP request found for state 0xb9b0a1f1b981bb6e, released from the list (8) eap: Peer sent packet with method EAP MSCHAPv2 (26) (8) eap: Calling submodule eap_mschapv2 to process data (8) eap_mschapv2: # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (8) eap_mschapv2: authenticate { (8) mschap: Found Cleartext-Password, hashing to create NT-Password (8) mschap: Found Cleartext-Password, hashing to create LM-Password (8) mschap: Creating challenge hash with username: robert_plestenjak (8) mschap: Client is using MS-CHAPv2 (8) mschap: ERROR: MS-CHAP2-Response is incorrect (8) [mschap] = reject (8) } # authenticate = reject (8) eap: Sending EAP Failure (code 4) ID 49 length 4 (8) eap: Freeing handler (8) [eap] = reject (8) } # authenticate = reject (8) Failed to authenticate the user (8) Using Post-Auth-Type Reject (8) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (8) Post-Auth-Type REJECT { (8) attr_filter.access_reject: EXPAND %{User-Name} (8) attr_filter.access_reject: --> robert_plestenjak (8) attr_filter.access_reject: Matched entry DEFAULT at line 11 (8) [attr_filter.access_reject] = updated (8) update outer.session-state { (8) &Module-Failure-Message := &request:Module-Failure-Message -> 'mschap: MS-CHAP2-Response is incorrect' (8) } # update outer.session-state = noop (8) } # Post-Auth-Type REJECT = updated (8) } # server inner-tunnel (8) Virtual server sending reply (8) MS-CHAP-Error = "1E=691 R=1 C=d8407b0aa2c7a010f49f4e37fef85724 V=3 M=Authentication failed" (8) EAP-Message = 0x04310004 (8) Message-Authenticator = 0x00000000000000000000000000000000 (8) eap_peap: Got tunneled reply code 3 (8) eap_peap: MS-CHAP-Error = "1E=691 R=1 C=d8407b0aa2c7a010f49f4e37fef85724 V=3 M=Authentication failed" (8) eap_peap: EAP-Message = 0x04310004 (8) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (8) eap_peap: Got tunneled reply RADIUS code 3 (8) eap_peap: MS-CHAP-Error = "1E=691 R=1 C=d8407b0aa2c7a010f49f4e37fef85724 V=3 M=Authentication failed" (8) eap_peap: EAP-Message = 0x04310004 (8) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (8) eap_peap: Tunneled authentication was rejected (8) eap_peap: FAILURE (8) eap: Sending EAP Request (code 1) ID 50 length 46 (8) eap: EAP session adding &reply:State = 0x46c8d2104efacbbc (8) [eap] = handled (8) } # authenticate = handled (8) Using Post-Auth-Type Challenge (8) # Executing group from file /etc/raddb/sites-enabled/default (8) Challenge { ... } # empty sub-section is ignored (8) session-state: Saving cached attributes (8) Module-Failure-Message := "mschap: MS-CHAP2-Response is incorrect" (8) Sent Access-Challenge Id 68 from X.X.X.X:1812 to X.X.X.X:37829 length 0 (8) EAP-Message = 0x0132002e19001703030023652f3ff10fb2c5ef30b7fb1e252f2bf6a22244994486f4debfdf66bcd18faa30877532 (8) Message-Authenticator = 0x00000000000000000000000000000000 (8) State = 0x46c8d2104efacbbc6e5900b0d6f9d128 (8) Finished request Waking up in 4.8 seconds. (9) Received Access-Request Id 69 from X.X.X.X:37829 to X.X.X.X:1812 length 313 (9) User-Name = "robert_plestenjak" (9) NAS-IP-Address = X.X.X.X (9) Called-Station-Id = "82-15-54-A9-EB-44:Blubber" (9) NAS-Port-Type = Wireless-802.11 (9) Service-Type = Framed-User (9) Calling-Station-Id = "18-F0-E4-3B-AA-02" (9) Connect-Info = "CONNECT 54.00 Mbps, 802.11ac, RSSI: 31, Channel: 108" (9) Acct-Session-Id = "AE4E038CE2ACDB0A" (9) Acct-Multi-Session-Id = "3F1C9E9F7EE1D184" (9) WLAN-Pairwise-Cipher = 1027076 (9) WLAN-Group-Cipher = 1027076 (9) WLAN-AKM-Suite = 1027073 (9) Meraki-Device-Name = "olai" (9) Framed-MTU = 1400 (9) EAP-Message = 0x0232002e19001703030023000000000000000389125c7c96bd31281466aa12830d3193192521ab1698685080c754 (9) State = 0x46c8d2104efacbbc6e5900b0d6f9d128 (9) Message-Authenticator = 0xfd042959aaae54e9dd9ac31800d0667b (9) Restoring &session-state (9) &session-state:Module-Failure-Message := "mschap: MS-CHAP2-Response is incorrect" (9) # Executing section authorize from file /etc/raddb/sites-enabled/default (9) authorize { (9) policy filter_username { (9) if (&User-Name) { (9) if (&User-Name) -> TRUE (9) if (&User-Name) { (9) if (&User-Name =~ / /) { (9) if (&User-Name =~ / /) -> FALSE (9) if (&User-Name =~ /@[^@]*@/ ) { (9) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (9) if (&User-Name =~ /\.\./ ) { (9) if (&User-Name =~ /\.\./ ) -> FALSE (9) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (9) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (9) if (&User-Name =~ /\.$/) { (9) if (&User-Name =~ /\.$/) -> FALSE (9) if (&User-Name =~ /(a)\./) { (9) if (&User-Name =~ /(a)\./) -> FALSE (9) } # if (&User-Name) = notfound (9) } # policy filter_username = notfound (9) [preprocess] = ok (9) [chap] = noop (9) [mschap] = noop (9) [digest] = noop (9) suffix: Checking for suffix after "@" (9) suffix: No '@' in User-Name = "robert_plestenjak", looking up realm NULL (9) suffix: No such realm "NULL" (9) [suffix] = noop (9) eap: Peer sent EAP Response (code 2) ID 50 length 46 (9) eap: Continuing tunnel setup (9) [eap] = ok (9) } # authorize = ok (9) Found Auth-Type = eap (9) # Executing group from file /etc/raddb/sites-enabled/default (9) authenticate { (9) eap: Expiring EAP session with state 0x46c8d2104efacbbc (9) eap: Finished EAP session with state 0x46c8d2104efacbbc (9) eap: Previous EAP request found for state 0x46c8d2104efacbbc, released from the list (9) eap: Peer sent packet with method EAP PEAP (25) (9) eap: Calling submodule eap_peap to process data (9) eap_peap: Continuing EAP-TLS (9) eap_peap: [eaptls verify] = ok (9) eap_peap: Done initial handshake (9) eap_peap: [eaptls process] = ok (9) eap_peap: Session established. Decoding tunneled attributes (9) eap_peap: PEAP state send tlv failure (9) eap_peap: Received EAP-TLV response (9) eap_peap: ERROR: The users session was previously rejected: returning reject (again.) (9) eap_peap: This means you need to read the PREVIOUS messages in the debug output (9) eap_peap: to find out the reason why the user was rejected (9) eap_peap: Look for "reject" or "fail". Those earlier messages will tell you (9) eap_peap: what went wrong, and how to fix the problem (9) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module failed (9) eap: Sending EAP Failure (code 4) ID 50 length 4 (9) eap: Failed in EAP select (9) [eap] = invalid (9) } # authenticate = invalid (9) Failed to authenticate the user (9) Using Post-Auth-Type Reject (9) # Executing group from file /etc/raddb/sites-enabled/default (9) Post-Auth-Type REJECT { (9) attr_filter.access_reject: EXPAND %{User-Name} (9) attr_filter.access_reject: --> robert_plestenjak (9) attr_filter.access_reject: Matched entry DEFAULT at line 11 (9) [attr_filter.access_reject] = updated (9) [eap] = noop (9) policy remove_reply_message_if_eap { (9) if (&reply:EAP-Message && &reply:Reply-Message) { (9) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (9) else { (9) [noop] = noop (9) } # else = noop (9) } # policy remove_reply_message_if_eap = noop (9) } # Post-Auth-Type REJECT = updated (9) Delaying response for 1.000000 seconds Waking up in 0.6 seconds. Waking up in 0.3 seconds. (9) Sending delayed response (9) Sent Access-Reject Id 69 from X.X.X.X:1812 to X.X.X.X:37829 length 44 (9) EAP-Message = 0x04320004 (9) Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.8 seconds. (0) Cleaning up request packet ID 60 with timestamp +9 (1) Cleaning up request packet ID 61 with timestamp +9 (2) Cleaning up request packet ID 62 with timestamp +9 (3) Cleaning up request packet ID 63 with timestamp +9 (4) Cleaning up request packet ID 64 with timestamp +9 (5) Cleaning up request packet ID 65 with timestamp +9 (6) Cleaning up request packet ID 66 with timestamp +9 (7) Cleaning up request packet ID 67 with timestamp +9 (8) Cleaning up request packet ID 68 with timestamp +9 (9) Cleaning up request packet ID 69 with timestamp +9 Ready to process requests (10) Received Access-Request Id 10 from X.X.X.X:51991 to X.X.X.X:1812 length 268 (10) User-Name = "robert_plestenjak" (10) NAS-IP-Address = X.X.X.X (10) Called-Station-Id = "82-15-44-A9-EB-44:Blubber" (10) NAS-Port-Type = Wireless-802.11 (10) Service-Type = Framed-User (10) Calling-Station-Id = "18-F0-E4-3B-AA-02" (10) Connect-Info = "CONNECT 54.00 Mbps, 802.11n, RSSI: 44, Channel: 1" (10) Acct-Session-Id = "6325D4B9D8CD9D01" (10) Acct-Multi-Session-Id = "33B691AA5B968946" (10) WLAN-Pairwise-Cipher = 1027076 (10) WLAN-Group-Cipher = 1027076 (10) WLAN-AKM-Suite = 1027073 (10) Meraki-Device-Name = "olai" (10) Framed-MTU = 1400 (10) EAP-Message = 0x02cd001601726f626572745f706c657374656e6a616b (10) Message-Authenticator = 0x9ef397887365b4a9c8d560ba66702b4c (10) # Executing section authorize from file /etc/raddb/sites-enabled/default (10) authorize { (10) policy filter_username { (10) if (&User-Name) { (10) if (&User-Name) -> TRUE (10) if (&User-Name) { (10) if (&User-Name =~ / /) { (10) if (&User-Name =~ / /) -> FALSE (10) if (&User-Name =~ /@[^@]*@/ ) { (10) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (10) if (&User-Name =~ /\.\./ ) { (10) if (&User-Name =~ /\.\./ ) -> FALSE (10) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (10) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (10) if (&User-Name =~ /\.$/) { (10) if (&User-Name =~ /\.$/) -> FALSE (10) if (&User-Name =~ /(a)\./) { (10) if (&User-Name =~ /(a)\./) -> FALSE (10) } # if (&User-Name) = notfound (10) } # policy filter_username = notfound (10) [preprocess] = ok (10) [chap] = noop (10) [mschap] = noop (10) [digest] = noop (10) suffix: Checking for suffix after "@" (10) suffix: No '@' in User-Name = "robert_plestenjak", looking up realm NULL (10) suffix: No such realm "NULL" (10) [suffix] = noop (10) eap: Peer sent EAP Response (code 2) ID 205 length 22 (10) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (10) [eap] = ok (10) } # authorize = ok (10) Found Auth-Type = eap (10) # Executing group from file /etc/raddb/sites-enabled/default (10) authenticate { (10) eap: Peer sent packet with method EAP Identity (1) (10) eap: Calling submodule eap_md5 to process data (10) eap_md5: Issuing MD5 Challenge (10) eap: Sending EAP Request (code 1) ID 206 length 22 (10) eap: EAP session adding &reply:State = 0x13b4f8c8137afc0c (10) [eap] = handled (10) } # authenticate = handled (10) Using Post-Auth-Type Challenge (10) # Executing group from file /etc/raddb/sites-enabled/default (10) Challenge { ... } # empty sub-section is ignored (10) Sent Access-Challenge Id 10 from X.X.X.X:1812 to X.X.X.X:51991 length 0 (10) EAP-Message = 0x01ce001604109894d79a35a2fc5f9745add589aedd82 (10) Message-Authenticator = 0x00000000000000000000000000000000 (10) State = 0x13b4f8c8137afc0caef2d3fb04d37962 (10) Finished request Waking up in 4.9 seconds. (11) Received Access-Request Id 11 from X.X.X.X:51991 to X.X.X.X:1812 length 270 (11) User-Name = "robert_plestenjak" (11) NAS-IP-Address = X.X.X.X (11) Called-Station-Id = "82-15-44-A9-EB-44:Blubber" (11) NAS-Port-Type = Wireless-802.11 (11) Service-Type = Framed-User (11) Calling-Station-Id = "18-F0-E4-3B-AA-02" (11) Connect-Info = "CONNECT 54.00 Mbps, 802.11n, RSSI: 44, Channel: 1" (11) Acct-Session-Id = "6325D4B9D8CD9D01" (11) Acct-Multi-Session-Id = "33B691AA5B968946" (11) WLAN-Pairwise-Cipher = 1027076 (11) WLAN-Group-Cipher = 1027076 (11) WLAN-AKM-Suite = 1027073 (11) Meraki-Device-Name = "olai" (11) Framed-MTU = 1400 (11) EAP-Message = 0x02ce00060319 (11) State = 0x13b4f8c8137afc0caef2d3fb04d37962 (11) Message-Authenticator = 0xd17920bf05e0fcb93caee9ebdc02bb6e (11) session-state: No cached attributes (11) # Executing section authorize from file /etc/raddb/sites-enabled/default (11) authorize { (11) policy filter_username { (11) if (&User-Name) { (11) if (&User-Name) -> TRUE (11) if (&User-Name) { (11) if (&User-Name =~ / /) { (11) if (&User-Name =~ / /) -> FALSE (11) if (&User-Name =~ /@[^@]*@/ ) { (11) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (11) if (&User-Name =~ /\.\./ ) { (11) if (&User-Name =~ /\.\./ ) -> FALSE (11) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (11) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (11) if (&User-Name =~ /\.$/) { (11) if (&User-Name =~ /\.$/) -> FALSE (11) if (&User-Name =~ /(a)\./) { (11) if (&User-Name =~ /(a)\./) -> FALSE (11) } # if (&User-Name) = notfound (11) } # policy filter_username = notfound (11) [preprocess] = ok (11) [chap] = noop (11) [mschap] = noop (11) [digest] = noop (11) suffix: Checking for suffix after "@" (11) suffix: No '@' in User-Name = "robert_plestenjak", looking up realm NULL (11) suffix: No such realm "NULL" (11) [suffix] = noop (11) eap: Peer sent EAP Response (code 2) ID 206 length 6 (11) eap: No EAP Start, assuming it's an on-going EAP conversation (11) [eap] = updated (11) [files] = noop rlm_ldap (ldap): Reserved connection (2) (11) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (11) ldap: --> (uid=robert_plestenjak) (11) ldap: Performing search in "dc=xlab,dc=si" with filter "(uid=robert_plestenjak)", scope "sub" (11) ldap: Waiting for search result... (11) ldap: User object found at DN "cn=Robert Plestenjak,ou=people,ou=xlab-research,dc=xlab,dc=si" (11) ldap: Processing user attributes (11) ldap: control:Password-With-Header += 'XXX' rlm_ldap (ldap): Released connection (2) Need 4 more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (6), 1 of 26 pending slots used rlm_ldap (ldap): Connecting to ldaps://auth3.xlab.si:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (11) [ldap] = updated (11) if ((ok || updated) && User-Password) { (11) if ((ok || updated) && User-Password) -> FALSE (11) [expiration] = noop (11) [logintime] = noop (11) pap: No {...} in Password-With-Header, re-writing to Cleartext-Password (11) pap: Removing &control:Password-With-Header (11) pap: WARNING: Auth-Type already set. Not setting to PAP (11) [pap] = noop (11) } # authorize = updated (11) Found Auth-Type = eap (11) # Executing group from file /etc/raddb/sites-enabled/default (11) authenticate { (11) eap: Expiring EAP session with state 0x13b4f8c8137afc0c (11) eap: Finished EAP session with state 0x13b4f8c8137afc0c (11) eap: Previous EAP request found for state 0x13b4f8c8137afc0c, released from the list (11) eap: Peer sent packet with method EAP NAK (3) (11) eap: Found mutually acceptable type PEAP (25) (11) eap: Calling submodule eap_peap to process data (11) eap_peap: Initiating new EAP-TLS session (11) eap_peap: [eaptls start] = request (11) eap: Sending EAP Request (code 1) ID 207 length 6 (11) eap: EAP session adding &reply:State = 0x13b4f8c8127be10c (11) [eap] = handled (11) } # authenticate = handled (11) Using Post-Auth-Type Challenge (11) # Executing group from file /etc/raddb/sites-enabled/default (11) Challenge { ... } # empty sub-section is ignored (11) Sent Access-Challenge Id 11 from X.X.X.X:1812 to X.X.X.X:51991 length 0 (11) EAP-Message = 0x01cf00061920 (11) Message-Authenticator = 0x00000000000000000000000000000000 (11) State = 0x13b4f8c8127be10caef2d3fb04d37962 (11) Finished request Waking up in 4.9 seconds. (12) Received Access-Request Id 12 from X.X.X.X:51991 to X.X.X.X:1812 length 413 (12) User-Name = "robert_plestenjak" (12) NAS-IP-Address = X.X.X.X (12) Called-Station-Id = "82-15-44-A9-EB-44:Blubber" (12) NAS-Port-Type = Wireless-802.11 (12) Service-Type = Framed-User (12) Calling-Station-Id = "18-F0-E4-3B-AA-02" (12) Connect-Info = "CONNECT 54.00 Mbps, 802.11n, RSSI: 44, Channel: 1" (12) Acct-Session-Id = "6325D4B9D8CD9D01" (12) Acct-Multi-Session-Id = "33B691AA5B968946" (12) WLAN-Pairwise-Cipher = 1027076 (12) WLAN-Group-Cipher = 1027076 (12) WLAN-AKM-Suite = 1027073 (12) Meraki-Device-Name = "olai" (12) Framed-MTU = 1400 (12) EAP-Message = 0x02cf009519800000008b1603010086010000820303a92d448a03d30bd55ed9e4048a71e3b984078789666a59e4f0b55047909bfaa900002ac02bc02fc02cc030cca9cca8c009c023c013c027c00ac024c014c028009c009d002f003c0035003d000a0100002fff0100010000170000000d0010000e0403 (12) State = 0x13b4f8c8127be10caef2d3fb04d37962 (12) Message-Authenticator = 0x75773d8e25d838dba548709fa45c599d (12) session-state: No cached attributes (12) # Executing section authorize from file /etc/raddb/sites-enabled/default (12) authorize { (12) policy filter_username { (12) if (&User-Name) { (12) if (&User-Name) -> TRUE (12) if (&User-Name) { (12) if (&User-Name =~ / /) { (12) if (&User-Name =~ / /) -> FALSE (12) if (&User-Name =~ /@[^@]*@/ ) { (12) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (12) if (&User-Name =~ /\.\./ ) { (12) if (&User-Name =~ /\.\./ ) -> FALSE (12) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (12) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (12) if (&User-Name =~ /\.$/) { (12) if (&User-Name =~ /\.$/) -> FALSE (12) if (&User-Name =~ /(a)\./) { (12) if (&User-Name =~ /(a)\./) -> FALSE (12) } # if (&User-Name) = notfound (12) } # policy filter_username = notfound (12) [preprocess] = ok (12) [chap] = noop (12) [mschap] = noop (12) [digest] = noop (12) suffix: Checking for suffix after "@" (12) suffix: No '@' in User-Name = "robert_plestenjak", looking up realm NULL (12) suffix: No such realm "NULL" (12) [suffix] = noop (12) eap: Peer sent EAP Response (code 2) ID 207 length 149 (12) eap: Continuing tunnel setup (12) [eap] = ok (12) } # authorize = ok (12) Found Auth-Type = eap (12) # Executing group from file /etc/raddb/sites-enabled/default (12) authenticate { (12) eap: Expiring EAP session with state 0x13b4f8c8127be10c (12) eap: Finished EAP session with state 0x13b4f8c8127be10c (12) eap: Previous EAP request found for state 0x13b4f8c8127be10c, released from the list (12) eap: Peer sent packet with method EAP PEAP (25) (12) eap: Calling submodule eap_peap to process data (12) eap_peap: Continuing EAP-TLS (12) eap_peap: Peer indicated complete TLS record size will be 139 bytes (12) eap_peap: Got complete TLS record (139 bytes) (12) eap_peap: [eaptls verify] = length included (12) eap_peap: (other): before/accept initialization (12) eap_peap: TLS_accept: before/accept initialization (12) eap_peap: <<< recv TLS 1.2 [length 0086] (12) eap_peap: TLS_accept: SSLv3 read client hello A (12) eap_peap: >>> send TLS 1.2 [length 0039] (12) eap_peap: TLS_accept: SSLv3 write server hello A (12) eap_peap: >>> send TLS 1.2 [length 08d3] (12) eap_peap: TLS_accept: SSLv3 write certificate A (12) eap_peap: >>> send TLS 1.2 [length 014d] (12) eap_peap: TLS_accept: SSLv3 write key exchange A (12) eap_peap: >>> send TLS 1.2 [length 0004] (12) eap_peap: TLS_accept: SSLv3 write server done A (12) eap_peap: TLS_accept: SSLv3 flush data (12) eap_peap: TLS_accept: SSLv3 read client certificate A (12) eap_peap: TLS_accept: Need to read more data: SSLv3 read client key exchange A (12) eap_peap: TLS_accept: Need to read more data: SSLv3 read client key exchange A (12) eap_peap: In SSL Handshake Phase (12) eap_peap: In SSL Accept mode (12) eap_peap: [eaptls process] = handled (12) eap: Sending EAP Request (code 1) ID 208 length 1004 (12) eap: EAP session adding &reply:State = 0x13b4f8c81164e10c (12) [eap] = handled (12) } # authenticate = handled (12) Using Post-Auth-Type Challenge (12) # Executing group from file /etc/raddb/sites-enabled/default (12) Challenge { ... } # empty sub-section is ignored (12) Sent Access-Challenge Id 12 from X.X.X.X:1812 to X.X.X.X:51991 length 0 (12) EAP-Message = 0x01d003ec19c000000a7116030300390200003503039ce049344384b2cbc710136022def40542d08e2187ae8522a95d7ea0da1a504100c02f00000dff01000100000b00040300010216030308d30b0008cf0008cc0003de308203da308202c2a003020102020101300d06092a864886f70d01010b050030 (12) Message-Authenticator = 0x00000000000000000000000000000000 (12) State = 0x13b4f8c81164e10caef2d3fb04d37962 (12) Finished request Waking up in 4.9 seconds. (13) Received Access-Request Id 13 from X.X.X.X:51991 to X.X.X.X:1812 length 270 (13) User-Name = "robert_plestenjak" (13) NAS-IP-Address = X.X.X.X (13) Called-Station-Id = "82-15-44-A9-EB-44:Blubber" (13) NAS-Port-Type = Wireless-802.11 (13) Service-Type = Framed-User (13) Calling-Station-Id = "18-F0-E4-3B-AA-02" (13) Connect-Info = "CONNECT 54.00 Mbps, 802.11n, RSSI: 44, Channel: 1" (13) Acct-Session-Id = "6325D4B9D8CD9D01" (13) Acct-Multi-Session-Id = "33B691AA5B968946" (13) WLAN-Pairwise-Cipher = 1027076 (13) WLAN-Group-Cipher = 1027076 (13) WLAN-AKM-Suite = 1027073 (13) Meraki-Device-Name = "olai" (13) Framed-MTU = 1400 (13) EAP-Message = 0x02d000061900 (13) State = 0x13b4f8c81164e10caef2d3fb04d37962 (13) Message-Authenticator = 0xecee55183201a215ec44e13e79ca257c (13) session-state: No cached attributes (13) # Executing section authorize from file /etc/raddb/sites-enabled/default (13) authorize { (13) policy filter_username { (13) if (&User-Name) { (13) if (&User-Name) -> TRUE (13) if (&User-Name) { (13) if (&User-Name =~ / /) { (13) if (&User-Name =~ / /) -> FALSE (13) if (&User-Name =~ /@[^@]*@/ ) { (13) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (13) if (&User-Name =~ /\.\./ ) { (13) if (&User-Name =~ /\.\./ ) -> FALSE (13) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (13) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (13) if (&User-Name =~ /\.$/) { (13) if (&User-Name =~ /\.$/) -> FALSE (13) if (&User-Name =~ /(a)\./) { (13) if (&User-Name =~ /(a)\./) -> FALSE (13) } # if (&User-Name) = notfound (13) } # policy filter_username = notfound (13) [preprocess] = ok (13) [chap] = noop (13) [mschap] = noop (13) [digest] = noop (13) suffix: Checking for suffix after "@" (13) suffix: No '@' in User-Name = "robert_plestenjak", looking up realm NULL (13) suffix: No such realm "NULL" (13) [suffix] = noop (13) eap: Peer sent EAP Response (code 2) ID 208 length 6 (13) eap: Continuing tunnel setup (13) [eap] = ok (13) } # authorize = ok (13) Found Auth-Type = eap (13) # Executing group from file /etc/raddb/sites-enabled/default (13) authenticate { (13) eap: Expiring EAP session with state 0x13b4f8c81164e10c (13) eap: Finished EAP session with state 0x13b4f8c81164e10c (13) eap: Previous EAP request found for state 0x13b4f8c81164e10c, released from the list (13) eap: Peer sent packet with method EAP PEAP (25) (13) eap: Calling submodule eap_peap to process data (13) eap_peap: Continuing EAP-TLS (13) eap_peap: Peer ACKed our handshake fragment (13) eap_peap: [eaptls verify] = request (13) eap_peap: [eaptls process] = handled (13) eap: Sending EAP Request (code 1) ID 209 length 1000 (13) eap: EAP session adding &reply:State = 0x13b4f8c81065e10c (13) [eap] = handled (13) } # authenticate = handled (13) Using Post-Auth-Type Challenge (13) # Executing group from file /etc/raddb/sites-enabled/default (13) Challenge { ... } # empty sub-section is ignored (13) Sent Access-Challenge Id 13 from X.X.X.X:1812 to X.X.X.X:51991 length 0 (13) EAP-Message = 0x01d103e819402dbdf62800fd47c44b6189df90644cc345df23b390e938143137414b4dc3906a2aefff96f82551639cf9a10ead226ee8a9d0d7c4bf51bcca698315290b7a181527f2841445909d7d420004e8308204e4308203cca003020102020900d20da3179fcff6af300d06092a864886f70d01010b (13) Message-Authenticator = 0x00000000000000000000000000000000 (13) State = 0x13b4f8c81065e10caef2d3fb04d37962 (13) Finished request Waking up in 4.9 seconds. (14) Received Access-Request Id 14 from X.X.X.X:51991 to X.X.X.X:1812 length 270 (14) User-Name = "robert_plestenjak" (14) NAS-IP-Address = X.X.X.X (14) Called-Station-Id = "82-15-44-A9-EB-44:Blubber" (14) NAS-Port-Type = Wireless-802.11 (14) Service-Type = Framed-User (14) Calling-Station-Id = "18-F0-E4-3B-AA-02" (14) Connect-Info = "CONNECT 54.00 Mbps, 802.11n, RSSI: 44, Channel: 1" (14) Acct-Session-Id = "6325D4B9D8CD9D01" (14) Acct-Multi-Session-Id = "33B691AA5B968946" (14) WLAN-Pairwise-Cipher = 1027076 (14) WLAN-Group-Cipher = 1027076 (14) WLAN-AKM-Suite = 1027073 (14) Meraki-Device-Name = "olai" (14) Framed-MTU = 1400 (14) EAP-Message = 0x02d100061900 (14) State = 0x13b4f8c81065e10caef2d3fb04d37962 (14) Message-Authenticator = 0x6808057d61ed210c43b2e7f0ed27c6b0 (14) session-state: No cached attributes (14) # Executing section authorize from file /etc/raddb/sites-enabled/default (14) authorize { (14) policy filter_username { (14) if (&User-Name) { (14) if (&User-Name) -> TRUE (14) if (&User-Name) { (14) if (&User-Name =~ / /) { (14) if (&User-Name =~ / /) -> FALSE (14) if (&User-Name =~ /@[^@]*@/ ) { (14) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (14) if (&User-Name =~ /\.\./ ) { (14) if (&User-Name =~ /\.\./ ) -> FALSE (14) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (14) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (14) if (&User-Name =~ /\.$/) { (14) if (&User-Name =~ /\.$/) -> FALSE (14) if (&User-Name =~ /(a)\./) { (14) if (&User-Name =~ /(a)\./) -> FALSE (14) } # if (&User-Name) = notfound (14) } # policy filter_username = notfound (14) [preprocess] = ok (14) [chap] = noop (14) [mschap] = noop (14) [digest] = noop (14) suffix: Checking for suffix after "@" (14) suffix: No '@' in User-Name = "robert_plestenjak", looking up realm NULL (14) suffix: No such realm "NULL" (14) [suffix] = noop (14) eap: Peer sent EAP Response (code 2) ID 209 length 6 (14) eap: Continuing tunnel setup (14) [eap] = ok (14) } # authorize = ok (14) Found Auth-Type = eap (14) # Executing group from file /etc/raddb/sites-enabled/default (14) authenticate { (14) eap: Expiring EAP session with state 0x13b4f8c81065e10c (14) eap: Finished EAP session with state 0x13b4f8c81065e10c (14) eap: Previous EAP request found for state 0x13b4f8c81065e10c, released from the list (14) eap: Peer sent packet with method EAP PEAP (25) (14) eap: Calling submodule eap_peap to process data (14) eap_peap: Continuing EAP-TLS (14) eap_peap: Peer ACKed our handshake fragment (14) eap_peap: [eaptls verify] = request (14) eap_peap: [eaptls process] = handled (14) eap: Sending EAP Request (code 1) ID 210 length 691 (14) eap: EAP session adding &reply:State = 0x13b4f8c81766e10c (14) [eap] = handled (14) } # authenticate = handled (14) Using Post-Auth-Type Challenge (14) # Executing group from file /etc/raddb/sites-enabled/default (14) Challenge { ... } # empty sub-section is ignored (14) Sent Access-Challenge Id 14 from X.X.X.X:1812 to X.X.X.X:51991 length 0 (14) EAP-Message = 0x01d202b319000530030101ff30360603551d1f042f302d302ba029a0278625687474703a2f2f7777772e6578616d706c652e6f72672f6578616d706c655f63612e63726c300d06092a864886f70d01010b0500038201010082ec17a6a7053cdb07445b2a8258e5e5f0cad094486cb4a81527d41f7ff73f (14) Message-Authenticator = 0x00000000000000000000000000000000 (14) State = 0x13b4f8c81766e10caef2d3fb04d37962 (14) Finished request Waking up in 4.9 seconds. (15) Received Access-Request Id 15 from X.X.X.X:51991 to X.X.X.X:1812 length 400 (15) User-Name = "robert_plestenjak" (15) NAS-IP-Address = X.X.X.X (15) Called-Station-Id = "82-15-44-A9-EB-44:Blubber" (15) NAS-Port-Type = Wireless-802.11 (15) Service-Type = Framed-User (15) Calling-Station-Id = "18-F0-E4-3B-AA-02" (15) Connect-Info = "CONNECT 54.00 Mbps, 802.11n, RSSI: 44, Channel: 1" (15) Acct-Session-Id = "6325D4B9D8CD9D01" (15) Acct-Multi-Session-Id = "33B691AA5B968946" (15) WLAN-Pairwise-Cipher = 1027076 (15) WLAN-Group-Cipher = 1027076 (15) WLAN-AKM-Suite = 1027073 (15) Meraki-Device-Name = "olai" (15) Framed-MTU = 1400 (15) EAP-Message = 0x02d2008819800000007e16030300461000004241046e9952972e88d85f4c8a0fec97f6921a748c8f3a9359e4c2f899fbfff13d0352d105d5dc817989b8830aa2e75623dbf2252b4df0338d9af3efac1ffbcb283d9714030300010116030300280000000000000000ba7043669f9c5cf21290c8c78fedd6 (15) State = 0x13b4f8c81766e10caef2d3fb04d37962 (15) Message-Authenticator = 0xdbfcb1ec8b36b3555264d93298e44ba3 (15) session-state: No cached attributes (15) # Executing section authorize from file /etc/raddb/sites-enabled/default (15) authorize { (15) policy filter_username { (15) if (&User-Name) { (15) if (&User-Name) -> TRUE (15) if (&User-Name) { (15) if (&User-Name =~ / /) { (15) if (&User-Name =~ / /) -> FALSE (15) if (&User-Name =~ /@[^@]*@/ ) { (15) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (15) if (&User-Name =~ /\.\./ ) { (15) if (&User-Name =~ /\.\./ ) -> FALSE (15) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (15) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (15) if (&User-Name =~ /\.$/) { (15) if (&User-Name =~ /\.$/) -> FALSE (15) if (&User-Name =~ /(a)\./) { (15) if (&User-Name =~ /(a)\./) -> FALSE (15) } # if (&User-Name) = notfound (15) } # policy filter_username = notfound (15) [preprocess] = ok (15) [chap] = noop (15) [mschap] = noop (15) [digest] = noop (15) suffix: Checking for suffix after "@" (15) suffix: No '@' in User-Name = "robert_plestenjak", looking up realm NULL (15) suffix: No such realm "NULL" (15) [suffix] = noop (15) eap: Peer sent EAP Response (code 2) ID 210 length 136 (15) eap: Continuing tunnel setup (15) [eap] = ok (15) } # authorize = ok (15) Found Auth-Type = eap (15) # Executing group from file /etc/raddb/sites-enabled/default (15) authenticate { (15) eap: Expiring EAP session with state 0x13b4f8c81766e10c (15) eap: Finished EAP session with state 0x13b4f8c81766e10c (15) eap: Previous EAP request found for state 0x13b4f8c81766e10c, released from the list (15) eap: Peer sent packet with method EAP PEAP (25) (15) eap: Calling submodule eap_peap to process data (15) eap_peap: Continuing EAP-TLS (15) eap_peap: Peer indicated complete TLS record size will be 126 bytes (15) eap_peap: Got complete TLS record (126 bytes) (15) eap_peap: [eaptls verify] = length included (15) eap_peap: <<< recv TLS 1.2 [length 0046] (15) eap_peap: TLS_accept: SSLv3 read client key exchange A (15) eap_peap: TLS_accept: SSLv3 read certificate verify A (15) eap_peap: <<< recv TLS 1.2 [length 0001] (15) eap_peap: <<< recv TLS 1.2 [length 0010] (15) eap_peap: TLS_accept: SSLv3 read finished A (15) eap_peap: >>> send TLS 1.2 [length 0001] (15) eap_peap: TLS_accept: SSLv3 write change cipher spec A (15) eap_peap: >>> send TLS 1.2 [length 0010] (15) eap_peap: TLS_accept: SSLv3 write finished A (15) eap_peap: TLS_accept: SSLv3 flush data (15) eap_peap: (other): SSL negotiation finished successfully (15) eap_peap: SSL Connection Established (15) eap_peap: [eaptls process] = handled (15) eap: Sending EAP Request (code 1) ID 211 length 57 (15) eap: EAP session adding &reply:State = 0x13b4f8c81667e10c (15) [eap] = handled (15) } # authenticate = handled (15) Using Post-Auth-Type Challenge (15) # Executing group from file /etc/raddb/sites-enabled/default (15) Challenge { ... } # empty sub-section is ignored (15) Sent Access-Challenge Id 15 from X.X.X.X:1812 to X.X.X.X:51991 length 0 (15) EAP-Message = 0x01d3003919001403030001011603030028c4d6cba0b48752b4673199c19d6aadd4b7ef802d79b2977018b55347e106ae975f42a0bae3224e60 (15) Message-Authenticator = 0x00000000000000000000000000000000 (15) State = 0x13b4f8c81667e10caef2d3fb04d37962 (15) Finished request Waking up in 4.8 seconds. (16) Received Access-Request Id 16 from X.X.X.X:51991 to X.X.X.X:1812 length 270 (16) User-Name = "robert_plestenjak" (16) NAS-IP-Address = X.X.X.X (16) Called-Station-Id = "82-15-44-A9-EB-44:Blubber" (16) NAS-Port-Type = Wireless-802.11 (16) Service-Type = Framed-User (16) Calling-Station-Id = "18-F0-E4-3B-AA-02" (16) Connect-Info = "CONNECT 54.00 Mbps, 802.11n, RSSI: 44, Channel: 1" (16) Acct-Session-Id = "6325D4B9D8CD9D01" (16) Acct-Multi-Session-Id = "33B691AA5B968946" (16) WLAN-Pairwise-Cipher = 1027076 (16) WLAN-Group-Cipher = 1027076 (16) WLAN-AKM-Suite = 1027073 (16) Meraki-Device-Name = "olai" (16) Framed-MTU = 1400 (16) EAP-Message = 0x02d300061900 (16) State = 0x13b4f8c81667e10caef2d3fb04d37962 (16) Message-Authenticator = 0x8a8f5afa9a3ca20b6a6e02804b573aeb (16) session-state: No cached attributes (16) # Executing section authorize from file /etc/raddb/sites-enabled/default (16) authorize { (16) policy filter_username { (16) if (&User-Name) { (16) if (&User-Name) -> TRUE (16) if (&User-Name) { (16) if (&User-Name =~ / /) { (16) if (&User-Name =~ / /) -> FALSE (16) if (&User-Name =~ /@[^@]*@/ ) { (16) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (16) if (&User-Name =~ /\.\./ ) { (16) if (&User-Name =~ /\.\./ ) -> FALSE (16) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (16) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (16) if (&User-Name =~ /\.$/) { (16) if (&User-Name =~ /\.$/) -> FALSE (16) if (&User-Name =~ /(a)\./) { (16) if (&User-Name =~ /(a)\./) -> FALSE (16) } # if (&User-Name) = notfound (16) } # policy filter_username = notfound (16) [preprocess] = ok (16) [chap] = noop (16) [mschap] = noop (16) [digest] = noop (16) suffix: Checking for suffix after "@" (16) suffix: No '@' in User-Name = "robert_plestenjak", looking up realm NULL (16) suffix: No such realm "NULL" (16) [suffix] = noop (16) eap: Peer sent EAP Response (code 2) ID 211 length 6 (16) eap: Continuing tunnel setup (16) [eap] = ok (16) } # authorize = ok (16) Found Auth-Type = eap (16) # Executing group from file /etc/raddb/sites-enabled/default (16) authenticate { (16) eap: Expiring EAP session with state 0x13b4f8c81667e10c (16) eap: Finished EAP session with state 0x13b4f8c81667e10c (16) eap: Previous EAP request found for state 0x13b4f8c81667e10c, released from the list (16) eap: Peer sent packet with method EAP PEAP (25) (16) eap: Calling submodule eap_peap to process data (16) eap_peap: Continuing EAP-TLS (16) eap_peap: Peer ACKed our handshake fragment. handshake is finished (16) eap_peap: [eaptls verify] = success (16) eap_peap: [eaptls process] = success (16) eap_peap: Session established. Decoding tunneled attributes (16) eap_peap: PEAP state TUNNEL ESTABLISHED (16) eap: Sending EAP Request (code 1) ID 212 length 40 (16) eap: EAP session adding &reply:State = 0x13b4f8c81560e10c (16) [eap] = handled (16) } # authenticate = handled (16) Using Post-Auth-Type Challenge (16) # Executing group from file /etc/raddb/sites-enabled/default (16) Challenge { ... } # empty sub-section is ignored (16) Sent Access-Challenge Id 16 from X.X.X.X:1812 to X.X.X.X:51991 length 0 (16) EAP-Message = 0x01d400281900170303001dc4d6cba0b48752b596fbd582271ba5144d0b07e037cdeb3c8872832bf8 (16) Message-Authenticator = 0x00000000000000000000000000000000 (16) State = 0x13b4f8c81560e10caef2d3fb04d37962 (16) Finished request Waking up in 4.8 seconds. (17) Received Access-Request Id 17 from X.X.X.X:51991 to X.X.X.X:1812 length 317 (17) User-Name = "robert_plestenjak" (17) NAS-IP-Address = X.X.X.X (17) Called-Station-Id = "82-15-44-A9-EB-44:Blubber" (17) NAS-Port-Type = Wireless-802.11 (17) Service-Type = Framed-User (17) Calling-Station-Id = "18-F0-E4-3B-AA-02" (17) Connect-Info = "CONNECT 54.00 Mbps, 802.11n, RSSI: 44, Channel: 1" (17) Acct-Session-Id = "6325D4B9D8CD9D01" (17) Acct-Multi-Session-Id = "33B691AA5B968946" (17) WLAN-Pairwise-Cipher = 1027076 (17) WLAN-Group-Cipher = 1027076 (17) WLAN-AKM-Suite = 1027073 (17) Meraki-Device-Name = "olai" (17) Framed-MTU = 1400 (17) EAP-Message = 0x02d400351900170303002a0000000000000001d156dcb306795b1a5490d8115263cc725c1acd8c76588e31d9d4d985562c98bda7f5 (17) State = 0x13b4f8c81560e10caef2d3fb04d37962 (17) Message-Authenticator = 0xdffaa6c92233672ac826e8759d82c057 (17) session-state: No cached attributes (17) # Executing section authorize from file /etc/raddb/sites-enabled/default (17) authorize { (17) policy filter_username { (17) if (&User-Name) { (17) if (&User-Name) -> TRUE (17) if (&User-Name) { (17) if (&User-Name =~ / /) { (17) if (&User-Name =~ / /) -> FALSE (17) if (&User-Name =~ /@[^@]*@/ ) { (17) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (17) if (&User-Name =~ /\.\./ ) { (17) if (&User-Name =~ /\.\./ ) -> FALSE (17) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (17) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (17) if (&User-Name =~ /\.$/) { (17) if (&User-Name =~ /\.$/) -> FALSE (17) if (&User-Name =~ /(a)\./) { (17) if (&User-Name =~ /(a)\./) -> FALSE (17) } # if (&User-Name) = notfound (17) } # policy filter_username = notfound (17) [preprocess] = ok (17) [chap] = noop (17) [mschap] = noop (17) [digest] = noop (17) suffix: Checking for suffix after "@" (17) suffix: No '@' in User-Name = "robert_plestenjak", looking up realm NULL (17) suffix: No such realm "NULL" (17) [suffix] = noop (17) eap: Peer sent EAP Response (code 2) ID 212 length 53 (17) eap: Continuing tunnel setup (17) [eap] = ok (17) } # authorize = ok (17) Found Auth-Type = eap (17) # Executing group from file /etc/raddb/sites-enabled/default (17) authenticate { (17) eap: Expiring EAP session with state 0x13b4f8c81560e10c (17) eap: Finished EAP session with state 0x13b4f8c81560e10c (17) eap: Previous EAP request found for state 0x13b4f8c81560e10c, released from the list (17) eap: Peer sent packet with method EAP PEAP (25) (17) eap: Calling submodule eap_peap to process data (17) eap_peap: Continuing EAP-TLS (17) eap_peap: [eaptls verify] = ok (17) eap_peap: Done initial handshake (17) eap_peap: [eaptls process] = ok (17) eap_peap: Session established. Decoding tunneled attributes (17) eap_peap: PEAP state WAITING FOR INNER IDENTITY (17) eap_peap: Identity - robert_plestenjak (17) eap_peap: Got inner identity 'robert_plestenjak' (17) eap_peap: Setting default EAP type for tunneled EAP session (17) eap_peap: Got tunneled request (17) eap_peap: EAP-Message = 0x02d4001601726f626572745f706c657374656e6a616b (17) eap_peap: Setting User-Name to robert_plestenjak (17) eap_peap: Sending tunneled request to inner-tunnel (17) eap_peap: EAP-Message = 0x02d4001601726f626572745f706c657374656e6a616b (17) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (17) eap_peap: User-Name = "robert_plestenjak" (17) Virtual server inner-tunnel received request (17) EAP-Message = 0x02d4001601726f626572745f706c657374656e6a616b (17) FreeRADIUS-Proxied-To = 127.0.0.1 (17) User-Name = "robert_plestenjak" (17) WARNING: Outer and inner identities are the same. User privacy is compromised. (17) server inner-tunnel { (17) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel (17) authorize { (17) policy filter_username { (17) if (&User-Name) { (17) if (&User-Name) -> TRUE (17) if (&User-Name) { (17) if (&User-Name =~ / /) { (17) if (&User-Name =~ / /) -> FALSE (17) if (&User-Name =~ /@[^@]*@/ ) { (17) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (17) if (&User-Name =~ /\.\./ ) { (17) if (&User-Name =~ /\.\./ ) -> FALSE (17) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (17) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (17) if (&User-Name =~ /\.$/) { (17) if (&User-Name =~ /\.$/) -> FALSE (17) if (&User-Name =~ /(a)\./) { (17) if (&User-Name =~ /(a)\./) -> FALSE (17) } # if (&User-Name) = notfound (17) } # policy filter_username = notfound (17) [chap] = noop (17) [mschap] = noop (17) suffix: Checking for suffix after "@" (17) suffix: No '@' in User-Name = "robert_plestenjak", looking up realm NULL (17) suffix: No such realm "NULL" (17) [suffix] = noop (17) update control { (17) &Proxy-To-Realm := LOCAL (17) } # update control = noop (17) eap: Peer sent EAP Response (code 2) ID 212 length 22 (17) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (17) [eap] = ok (17) } # authorize = ok (17) Found Auth-Type = eap (17) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (17) authenticate { (17) eap: Peer sent packet with method EAP Identity (1) (17) eap: Calling submodule eap_mschapv2 to process data (17) eap_mschapv2: Issuing Challenge (17) eap: Sending EAP Request (code 1) ID 213 length 43 (17) eap: EAP session adding &reply:State = 0x8f45c9568f90d385 (17) [eap] = handled (17) } # authenticate = handled (17) } # server inner-tunnel (17) Virtual server sending reply (17) EAP-Message = 0x01d5002b1a01d50026103481537f998fa1371fd68721d06fd7c1667265657261646975732d332e302e3133 (17) Message-Authenticator = 0x00000000000000000000000000000000 (17) State = 0x8f45c9568f90d3857e52bda50653607d (17) eap_peap: Got tunneled reply code 11 (17) eap_peap: EAP-Message = 0x01d5002b1a01d50026103481537f998fa1371fd68721d06fd7c1667265657261646975732d332e302e3133 (17) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (17) eap_peap: State = 0x8f45c9568f90d3857e52bda50653607d (17) eap_peap: Got tunneled reply RADIUS code 11 (17) eap_peap: EAP-Message = 0x01d5002b1a01d50026103481537f998fa1371fd68721d06fd7c1667265657261646975732d332e302e3133 (17) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (17) eap_peap: State = 0x8f45c9568f90d3857e52bda50653607d (17) eap_peap: Got tunneled Access-Challenge (17) eap: Sending EAP Request (code 1) ID 213 length 74 (17) eap: EAP session adding &reply:State = 0x13b4f8c81461e10c (17) [eap] = handled (17) } # authenticate = handled (17) Using Post-Auth-Type Challenge (17) # Executing group from file /etc/raddb/sites-enabled/default (17) Challenge { ... } # empty sub-section is ignored (17) Sent Access-Challenge Id 17 from X.X.X.X:1812 to X.X.X.X:51991 length 0 (17) EAP-Message = 0x01d5004a1900170303003fc4d6cba0b48752b678685a1c20d35c1495eeb8b7b68d48af7559cb23b1794638500578a62c50725d1c13f70559dd2ab4ccbc5f333da3c269bb54861de08c5d (17) Message-Authenticator = 0x00000000000000000000000000000000 (17) State = 0x13b4f8c81461e10caef2d3fb04d37962 (17) Finished request Waking up in 4.8 seconds. (18) Received Access-Request Id 18 from X.X.X.X:51991 to X.X.X.X:1812 length 371 (18) User-Name = "robert_plestenjak" (18) NAS-IP-Address = X.X.X.X (18) Called-Station-Id = "82-15-44-A9-EB-44:Blubber" (18) NAS-Port-Type = Wireless-802.11 (18) Service-Type = Framed-User (18) Calling-Station-Id = "18-F0-E4-3B-AA-02" (18) Connect-Info = "CONNECT 54.00 Mbps, 802.11n, RSSI: 44, Channel: 1" (18) Acct-Session-Id = "6325D4B9D8CD9D01" (18) Acct-Multi-Session-Id = "33B691AA5B968946" (18) WLAN-Pairwise-Cipher = 1027076 (18) WLAN-Group-Cipher = 1027076 (18) WLAN-AKM-Suite = 1027073 (18) Meraki-Device-Name = "olai" (18) Framed-MTU = 1400 (18) EAP-Message = 0x02d5006b1900170303006000000000000000020c47825d8d203487343c1cb7cf937baaa3da3ec65947d11d4899785cfde46b828ddf938c7d8be000eeaa66195bd54d33f0cac081834d0215acdfd165302a9c12f09e8c2df780ccda3057bcbf23228b4b9817ae6a78a96c2c (18) State = 0x13b4f8c81461e10caef2d3fb04d37962 (18) Message-Authenticator = 0x542d7969f2658b6f35989a19866db2dc (18) session-state: No cached attributes (18) # Executing section authorize from file /etc/raddb/sites-enabled/default (18) authorize { (18) policy filter_username { (18) if (&User-Name) { (18) if (&User-Name) -> TRUE (18) if (&User-Name) { (18) if (&User-Name =~ / /) { (18) if (&User-Name =~ / /) -> FALSE (18) if (&User-Name =~ /@[^@]*@/ ) { (18) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (18) if (&User-Name =~ /\.\./ ) { (18) if (&User-Name =~ /\.\./ ) -> FALSE (18) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (18) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (18) if (&User-Name =~ /\.$/) { (18) if (&User-Name =~ /\.$/) -> FALSE (18) if (&User-Name =~ /(a)\./) { (18) if (&User-Name =~ /(a)\./) -> FALSE (18) } # if (&User-Name) = notfound (18) } # policy filter_username = notfound (18) [preprocess] = ok (18) [chap] = noop (18) [mschap] = noop (18) [digest] = noop (18) suffix: Checking for suffix after "@" (18) suffix: No '@' in User-Name = "robert_plestenjak", looking up realm NULL (18) suffix: No such realm "NULL" (18) [suffix] = noop (18) eap: Peer sent EAP Response (code 2) ID 213 length 107 (18) eap: Continuing tunnel setup (18) [eap] = ok (18) } # authorize = ok (18) Found Auth-Type = eap (18) # Executing group from file /etc/raddb/sites-enabled/default (18) authenticate { (18) eap: Expiring EAP session with state 0x8f45c9568f90d385 (18) eap: Finished EAP session with state 0x13b4f8c81461e10c (18) eap: Previous EAP request found for state 0x13b4f8c81461e10c, released from the list (18) eap: Peer sent packet with method EAP PEAP (25) (18) eap: Calling submodule eap_peap to process data (18) eap_peap: Continuing EAP-TLS (18) eap_peap: [eaptls verify] = ok (18) eap_peap: Done initial handshake (18) eap_peap: [eaptls process] = ok (18) eap_peap: Session established. Decoding tunneled attributes (18) eap_peap: PEAP state phase2 (18) eap_peap: EAP method MSCHAPv2 (26) (18) eap_peap: Got tunneled request (18) eap_peap: EAP-Message = 0x02d5004c1a02d5004731d8d694eb0e711635a2a5c6d011d44414000000000000000080648d3803f60d505ec6b8f76843d49dd4a6a7854eee97fa00726f626572745f706c657374656e6a616b (18) eap_peap: Setting User-Name to robert_plestenjak (18) eap_peap: Sending tunneled request to inner-tunnel (18) eap_peap: EAP-Message = 0x02d5004c1a02d5004731d8d694eb0e711635a2a5c6d011d44414000000000000000080648d3803f60d505ec6b8f76843d49dd4a6a7854eee97fa00726f626572745f706c657374656e6a616b (18) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (18) eap_peap: User-Name = "robert_plestenjak" (18) eap_peap: State = 0x8f45c9568f90d3857e52bda50653607d (18) Virtual server inner-tunnel received request (18) EAP-Message = 0x02d5004c1a02d5004731d8d694eb0e711635a2a5c6d011d44414000000000000000080648d3803f60d505ec6b8f76843d49dd4a6a7854eee97fa00726f626572745f706c657374656e6a616b (18) FreeRADIUS-Proxied-To = 127.0.0.1 (18) User-Name = "robert_plestenjak" (18) State = 0x8f45c9568f90d3857e52bda50653607d (18) WARNING: Outer and inner identities are the same. User privacy is compromised. (18) server inner-tunnel { (18) session-state: No cached attributes (18) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel (18) authorize { (18) policy filter_username { (18) if (&User-Name) { (18) if (&User-Name) -> TRUE (18) if (&User-Name) { (18) if (&User-Name =~ / /) { (18) if (&User-Name =~ / /) -> FALSE (18) if (&User-Name =~ /@[^@]*@/ ) { (18) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (18) if (&User-Name =~ /\.\./ ) { (18) if (&User-Name =~ /\.\./ ) -> FALSE (18) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (18) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (18) if (&User-Name =~ /\.$/) { (18) if (&User-Name =~ /\.$/) -> FALSE (18) if (&User-Name =~ /(a)\./) { (18) if (&User-Name =~ /(a)\./) -> FALSE (18) } # if (&User-Name) = notfound (18) } # policy filter_username = notfound (18) [chap] = noop (18) [mschap] = noop (18) suffix: Checking for suffix after "@" (18) suffix: No '@' in User-Name = "robert_plestenjak", looking up realm NULL (18) suffix: No such realm "NULL" (18) [suffix] = noop (18) update control { (18) &Proxy-To-Realm := LOCAL (18) } # update control = noop (18) eap: Peer sent EAP Response (code 2) ID 213 length 76 (18) eap: No EAP Start, assuming it's an on-going EAP conversation (18) [eap] = updated (18) [files] = noop rlm_ldap (ldap): Reserved connection (3) (18) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (18) ldap: --> (uid=robert_plestenjak) (18) ldap: Performing search in "dc=xlab,dc=si" with filter "(uid=robert_plestenjak)", scope "sub" (18) ldap: Waiting for search result... (18) ldap: User object found at DN "cn=Robert Plestenjak,ou=people,ou=xlab-research,dc=xlab,dc=si" (18) ldap: Processing user attributes (18) ldap: control:Password-With-Header += 'XXX' rlm_ldap (ldap): Released connection (3) (18) [ldap] = updated (18) [expiration] = noop (18) [logintime] = noop (18) pap: No {...} in Password-With-Header, re-writing to Cleartext-Password (18) pap: Removing &control:Password-With-Header (18) pap: WARNING: Auth-Type already set. Not setting to PAP (18) [pap] = noop (18) } # authorize = updated (18) Found Auth-Type = eap (18) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (18) authenticate { (18) eap: Expiring EAP session with state 0x8f45c9568f90d385 (18) eap: Finished EAP session with state 0x8f45c9568f90d385 (18) eap: Previous EAP request found for state 0x8f45c9568f90d385, released from the list (18) eap: Peer sent packet with method EAP MSCHAPv2 (26) (18) eap: Calling submodule eap_mschapv2 to process data (18) eap_mschapv2: # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (18) eap_mschapv2: authenticate { (18) mschap: Found Cleartext-Password, hashing to create NT-Password (18) mschap: Found Cleartext-Password, hashing to create LM-Password (18) mschap: Creating challenge hash with username: robert_plestenjak (18) mschap: Client is using MS-CHAPv2 (18) mschap: ERROR: MS-CHAP2-Response is incorrect (18) [mschap] = reject (18) } # authenticate = reject (18) eap: Sending EAP Failure (code 4) ID 213 length 4 (18) eap: Freeing handler (18) [eap] = reject (18) } # authenticate = reject (18) Failed to authenticate the user (18) Using Post-Auth-Type Reject (18) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (18) Post-Auth-Type REJECT { (18) attr_filter.access_reject: EXPAND %{User-Name} (18) attr_filter.access_reject: --> robert_plestenjak (18) attr_filter.access_reject: Matched entry DEFAULT at line 11 (18) [attr_filter.access_reject] = updated (18) update outer.session-state { (18) &Module-Failure-Message := &request:Module-Failure-Message -> 'mschap: MS-CHAP2-Response is incorrect' (18) } # update outer.session-state = noop (18) } # Post-Auth-Type REJECT = updated (18) } # server inner-tunnel (18) Virtual server sending reply (18) MS-CHAP-Error = "\325E=691 R=1 C=2ca3a2ed3d4ef46ebff14aded477265f V=3 M=Authentication failed" (18) EAP-Message = 0x04d50004 (18) Message-Authenticator = 0x00000000000000000000000000000000 (18) eap_peap: Got tunneled reply code 3 (18) eap_peap: MS-CHAP-Error = "\325E=691 R=1 C=2ca3a2ed3d4ef46ebff14aded477265f V=3 M=Authentication failed" (18) eap_peap: EAP-Message = 0x04d50004 (18) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (18) eap_peap: Got tunneled reply RADIUS code 3 (18) eap_peap: MS-CHAP-Error = "\325E=691 R=1 C=2ca3a2ed3d4ef46ebff14aded477265f V=3 M=Authentication failed" (18) eap_peap: EAP-Message = 0x04d50004 (18) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (18) eap_peap: Tunneled authentication was rejected (18) eap_peap: FAILURE (18) eap: Sending EAP Request (code 1) ID 214 length 46 (18) eap: EAP session adding &reply:State = 0x13b4f8c81b62e10c (18) [eap] = handled (18) } # authenticate = handled (18) Using Post-Auth-Type Challenge (18) # Executing group from file /etc/raddb/sites-enabled/default (18) Challenge { ... } # empty sub-section is ignored (18) session-state: Saving cached attributes (18) Module-Failure-Message := "mschap: MS-CHAP2-Response is incorrect" (18) Sent Access-Challenge Id 18 from X.X.X.X:1812 to X.X.X.X:51991 length 0 (18) EAP-Message = 0x01d6002e19001703030023c4d6cba0b48752b7f8f87842178ba52177865f6c1cef5524f872ed8897901cb80d3a00 (18) Message-Authenticator = 0x00000000000000000000000000000000 (18) State = 0x13b4f8c81b62e10caef2d3fb04d37962 (18) Finished request Waking up in 4.8 seconds. (19) Received Access-Request Id 19 from X.X.X.X:51991 to X.X.X.X:1812 length 310 (19) User-Name = "robert_plestenjak" (19) NAS-IP-Address = X.X.X.X (19) Called-Station-Id = "82-15-44-A9-EB-44:Blubber" (19) NAS-Port-Type = Wireless-802.11 (19) Service-Type = Framed-User (19) Calling-Station-Id = "18-F0-E4-3B-AA-02" (19) Connect-Info = "CONNECT 54.00 Mbps, 802.11n, RSSI: 44, Channel: 1" (19) Acct-Session-Id = "6325D4B9D8CD9D01" (19) Acct-Multi-Session-Id = "33B691AA5B968946" (19) WLAN-Pairwise-Cipher = 1027076 (19) WLAN-Group-Cipher = 1027076 (19) WLAN-AKM-Suite = 1027073 (19) Meraki-Device-Name = "olai" (19) Framed-MTU = 1400 (19) EAP-Message = 0x02d6002e19001703030023000000000000000308fa96363a074f0d6a71b51ac3f369d6bb554270c5c198b63ca951 (19) State = 0x13b4f8c81b62e10caef2d3fb04d37962 (19) Message-Authenticator = 0xb04cbd1a88e53186c391121c6b9f62b1 (19) Restoring &session-state (19) &session-state:Module-Failure-Message := "mschap: MS-CHAP2-Response is incorrect" (19) # Executing section authorize from file /etc/raddb/sites-enabled/default (19) authorize { (19) policy filter_username { (19) if (&User-Name) { (19) if (&User-Name) -> TRUE (19) if (&User-Name) { (19) if (&User-Name =~ / /) { (19) if (&User-Name =~ / /) -> FALSE (19) if (&User-Name =~ /@[^@]*@/ ) { (19) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (19) if (&User-Name =~ /\.\./ ) { (19) if (&User-Name =~ /\.\./ ) -> FALSE (19) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (19) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (19) if (&User-Name =~ /\.$/) { (19) if (&User-Name =~ /\.$/) -> FALSE (19) if (&User-Name =~ /(a)\./) { (19) if (&User-Name =~ /(a)\./) -> FALSE (19) } # if (&User-Name) = notfound (19) } # policy filter_username = notfound (19) [preprocess] = ok (19) [chap] = noop (19) [mschap] = noop (19) [digest] = noop (19) suffix: Checking for suffix after "@" (19) suffix: No '@' in User-Name = "robert_plestenjak", looking up realm NULL (19) suffix: No such realm "NULL" (19) [suffix] = noop (19) eap: Peer sent EAP Response (code 2) ID 214 length 46 (19) eap: Continuing tunnel setup (19) [eap] = ok (19) } # authorize = ok (19) Found Auth-Type = eap (19) # Executing group from file /etc/raddb/sites-enabled/default (19) authenticate { (19) eap: Expiring EAP session with state 0x13b4f8c81b62e10c (19) eap: Finished EAP session with state 0x13b4f8c81b62e10c (19) eap: Previous EAP request found for state 0x13b4f8c81b62e10c, released from the list (19) eap: Peer sent packet with method EAP PEAP (25) (19) eap: Calling submodule eap_peap to process data (19) eap_peap: Continuing EAP-TLS (19) eap_peap: [eaptls verify] = ok (19) eap_peap: Done initial handshake (19) eap_peap: [eaptls process] = ok (19) eap_peap: Session established. Decoding tunneled attributes (19) eap_peap: PEAP state send tlv failure (19) eap_peap: Received EAP-TLV response (19) eap_peap: ERROR: The users session was previously rejected: returning reject (again.) (19) eap_peap: This means you need to read the PREVIOUS messages in the debug output (19) eap_peap: to find out the reason why the user was rejected (19) eap_peap: Look for "reject" or "fail". Those earlier messages will tell you (19) eap_peap: what went wrong, and how to fix the problem (19) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module failed (19) eap: Sending EAP Failure (code 4) ID 214 length 4 (19) eap: Failed in EAP select (19) [eap] = invalid (19) } # authenticate = invalid (19) Failed to authenticate the user (19) Using Post-Auth-Type Reject (19) # Executing group from file /etc/raddb/sites-enabled/default (19) Post-Auth-Type REJECT { (19) attr_filter.access_reject: EXPAND %{User-Name} (19) attr_filter.access_reject: --> robert_plestenjak (19) attr_filter.access_reject: Matched entry DEFAULT at line 11 (19) [attr_filter.access_reject] = updated (19) [eap] = noop (19) policy remove_reply_message_if_eap { (19) if (&reply:EAP-Message && &reply:Reply-Message) { (19) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (19) else { (19) [noop] = noop (19) } # else = noop (19) } # policy remove_reply_message_if_eap = noop (19) } # Post-Auth-Type REJECT = updated (19) Delaying response for 1.000000 seconds Waking up in 0.6 seconds. Waking up in 0.3 seconds. (19) Sending delayed response (19) Sent Access-Reject Id 19 from X.X.X.X:1812 to X.X.X.X:51991 length 44 (19) EAP-Message = 0x04d60004 (19) Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.8 seconds. (10) Cleaning up request packet ID 10 with timestamp +25 (11) Cleaning up request packet ID 11 with timestamp +25 (12) Cleaning up request packet ID 12 with timestamp +25 (13) Cleaning up request packet ID 13 with timestamp +25 (14) Cleaning up request packet ID 14 with timestamp +25 (15) Cleaning up request packet ID 15 with timestamp +25 (16) Cleaning up request packet ID 16 with timestamp +25 (17) Cleaning up request packet ID 17 with timestamp +25 (18) Cleaning up request packet ID 18 with timestamp +25 (19) Cleaning up request packet ID 19 with timestamp +25 Ready to process requests

2 5

FreeRadius Docker Image
by Mitch Sullivan 29 Mar '18

29 Mar '18

Hi Team. My final question to the arbiters of Freeradius Wisdom. Can anyone recommend a FreeRadius docker image? Something that allows persistent storage of; Clients.conf EAP LDAP Certs folder Apologies if this has been addressed many times already. Thanks in advance Mitch Mitch.Sullivan mitch.sullivan(a)swarm64.com IT administrator | Swarm64 AS Swarm64 AS Zweigstelle Hive Ullsteinstr. 114 | 12109 Berlin | Germany

4 4

Implementing an account expiry in the users file
by Stefan Paetow 28 Mar '18

28 Mar '18

Hi, I'm building a really basic system at the moment and want to implement a basic account expiry in the users file (since that's my user store). I found the Expiration attribute, but there seems to be a documentation mismatch. The FreeRADIUS docs on NetworkRADIUS say the format is one emitted by 'date'. In my instance that is 'Wed Mar 28 15:41:12 UTC 2018'. But that's not accepted. What *is* accepted is a Unix-style epoch timestamp (like tomorrow this time: '1522337946' sans quotes). Can I get clarification on this? :-) With Regards Stefan Paetow Consultant, Trust and Identity t: +44 (0)1235 822 125 gpg: 0x3FCE5142 xmpp: stefanp(a)jabber.dev.ja.net skype: stefan.paetow.janet jisc.ac.uk Jisc is a registered charity (number 1149740) and a company limited by guarantee which is registered in England under Company No. 5747339, VAT No. GB 197 0632 86. Jisc’s registered office is: One Castlepark, Tower Hill, Bristol, BS2 0JA. T 0203 697 5800.

2 2

3.0.16 rpm or yum
by Michael Duckett 28 Mar '18

28 Mar '18

I need 3.0.16 to allow me to support TLS 1.0 EAP for Centos 7. I go to the repo referred to on radius and it's not there. How can I get 3.0.16 for centos 7? Thanks in advance.

2 1

Problem when using load balancer
by Talel Krimi 28 Mar '18

28 Mar '18

Hello my freeradius server works fine and I tested it using radperf but when i user nginx load balancer it stuck on cleaning up request any help thank you

2 2

Radius Testing. EAP-TTLS, (GTC - PAP) SSHA Password
by Mitch Sullivan 28 Mar '18

28 Mar '18

Hi Freeradius Legends. I've been rolling out an instance of freeradius in our environment. The documentation has been terrific and this mailing list also very helpful very helpful I'm trying to use EAP - TTLS for authentication. I can bind to our IPA server without issue. I made a testing environment and was able to get accept packets without issue. However, while trying to test self-signed certificates in our live environment I encounter issue with what looks like problems with hashed passwords. (I think IPA uses salted MD5 hash passwords by default, but our environment uses SSHA1 passwords due to a migration from openLDAP). My implementation steps are. Install freeradius and freeradius ldap remove testing certs and generate self signed certs edit ldap module to bind to our IPA edit EAP module to set type to TTLS, input certificate info, and set TTLS tunnel type to GTC add Wifi AP to clients.conf below is the output from debug mode. I've blanked out any company information for security purposes. FreeRADIUS Version 3.0.13 Copyright (C) 1999-2017 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/raddb/dictionary including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/mods-enabled/ including configuration file /etc/raddb/mods-enabled/always including configuration file /etc/raddb/mods-enabled/attr_filter including configuration file /etc/raddb/mods-enabled/cache_eap including configuration file /etc/raddb/mods-enabled/chap including configuration file /etc/raddb/mods-enabled/date including configuration file /etc/raddb/mods-enabled/detail including configuration file /etc/raddb/mods-enabled/detail.log including configuration file /etc/raddb/mods-enabled/dhcp including configuration file /etc/raddb/mods-enabled/digest including configuration file /etc/raddb/mods-enabled/dynamic_clients including configuration file /etc/raddb/mods-enabled/eap including configuration file /etc/raddb/mods-enabled/echo including configuration file /etc/raddb/mods-enabled/exec including configuration file /etc/raddb/mods-enabled/expiration including configuration file /etc/raddb/mods-enabled/expr including configuration file /etc/raddb/mods-enabled/files including configuration file /etc/raddb/mods-enabled/linelog including configuration file /etc/raddb/mods-enabled/logintime including configuration file /etc/raddb/mods-enabled/mschap including configuration file /etc/raddb/mods-enabled/ntlm_auth including configuration file /etc/raddb/mods-enabled/pap including configuration file /etc/raddb/mods-enabled/passwd including configuration file /etc/raddb/mods-enabled/preprocess including configuration file /etc/raddb/mods-enabled/radutmp including configuration file /etc/raddb/mods-enabled/realm including configuration file /etc/raddb/mods-enabled/replicate including configuration file /etc/raddb/mods-enabled/soh including configuration file /etc/raddb/mods-enabled/sradutmp including configuration file /etc/raddb/mods-enabled/unix including configuration file /etc/raddb/mods-enabled/unpack including configuration file /etc/raddb/mods-enabled/utf8 including configuration file /etc/raddb/mods-enabled/ldap including files in directory /etc/raddb/policy.d/ including configuration file /etc/raddb/policy.d/accounting including configuration file /etc/raddb/policy.d/canonicalization including configuration file /etc/raddb/policy.d/control including configuration file /etc/raddb/policy.d/cui including configuration file /etc/raddb/policy.d/debug including configuration file /etc/raddb/policy.d/dhcp including configuration file /etc/raddb/policy.d/eap including configuration file /etc/raddb/policy.d/filter including configuration file /etc/raddb/policy.d/operator-name including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/inner-tunnel main { security { user = "radiusd" group = "radiusd" allow_core_dumps = no } name = "radiusd" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" } main { name = "radiusd" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" libdir = "/usr/lib64/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client ap1 { ipaddr = 10.0.2.2 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_always # Loading module "reject" from file /etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_chap # Loading module "chap" from file /etc/raddb/mods-enabled/chap # Loaded module rlm_date # Loading module "date" from file /etc/raddb/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" } # Loaded module rlm_detail # Loading module "detail" from file /etc/raddb/mods-enabled/detail detail { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "auth_log" from file /etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_dhcp # Loading module "dhcp" from file /etc/raddb/mods-enabled/dhcp # Loaded module rlm_digest # Loading module "digest" from file /etc/raddb/mods-enabled/digest # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_eap # Loading module "eap" from file /etc/raddb/mods-enabled/eap eap { default_eap_type = "ttls" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_exec # Loading module "echo" from file /etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loading module "exec" from file /etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/raddb/mods-enabled/expiration # Loaded module rlm_expr # Loading module "expr" from file /etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_files # Loading module "files" from file /etc/raddb/mods-enabled/files files { filename = "/etc/raddb/mods-config/files/authorize" acctusersfile = "/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy" } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/raddb/mods-enabled/linelog linelog { filename = "/var/log/radius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/var/log/radius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loading module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_pap # Loading module "pap" from file /etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups" hints = "/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/raddb/mods-enabled/replicate # Loaded module rlm_soh # Loading module "soh" from file /etc/raddb/mods-enabled/soh soh { dhcp = yes } # Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_unix # Loading module "unix" from file /etc/raddb/mods-enabled/unix unix { radwtmp = "/var/log/radius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_unpack # Loading module "unpack" from file /etc/raddb/mods-enabled/unpack # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/raddb/mods-enabled/utf8 # Loaded module rlm_ldap # Loading module "ldap" from file /etc/raddb/mods-enabled/ldap ldap { server = "PRIVATE" identity = "cn=PRIVATE" password = <<< secret >>> sasl { } user { scope = "sub" access_positive = yes sasl { } } group { filter = "(objectClass=posixGroup)" scope = "sub" name_attribute = "cn" membership_attribute = "memberOf" cacheable_name = no cacheable_dn = no } client { filter = "(objectClass=radiusClient)" scope = "sub" base_dn = "cn=users,cn=accounts,dc=swarm64,dc=com" } profile { } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 1 res_timeout = 10 srv_timelimit = 3 idle = 60 probes = 3 interval = 3 } tls { start_tls = no } } Creating attribute LDAP-Group instantiate { } # Instantiating module "reject" from file /etc/raddb/mods-enabled/always # Instantiating module "fail" from file /etc/raddb/mods-enabled/always # Instantiating module "ok" from file /etc/raddb/mods-enabled/always # Instantiating module "handled" from file /etc/raddb/mods-enabled/always # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always # Instantiating module "noop" from file /etc/raddb/mods-enabled/always # Instantiating module "updated" from file /etc/raddb/mods-enabled/always # Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject [/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response # Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/raddb/certs" pem_file_type = yes private_key_file = "/etc/raddb/certs/server.pem" certificate_file = "/etc/raddb/certs/server.pem" ca_file = "/etc/raddb/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/raddb/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "gtc" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "expiration" from file /etc/raddb/mods-enabled/expiration # Instantiating module "files" from file /etc/raddb/mods-enabled/files reading pairlist file /etc/raddb/mods-config/files/authorize reading pairlist file /etc/raddb/mods-config/files/accounting reading pairlist file /etc/raddb/mods-config/files/pre-proxy # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog # Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap # Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "preprocess" from file /etc/raddb/mods-enabled/preprocess reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /etc/raddb/mods-config/preprocess/hints # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm # Instantiating module "ldap" from file /etc/raddb/mods-enabled/ldap rlm_ldap: libldap vendor: OpenLDAP, version: 20444 accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } rlm_ldap (ldap): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldap://ipa.swarm64.com:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots used rlm_ldap (ldap): Connecting to ldap://ipa.swarm64.com:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots used rlm_ldap (ldap): Connecting to ldap://ipa.swarm64.com:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots used rlm_ldap (ldap): Connecting to ldap://ipa.swarm64.com:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots used rlm_ldap (ldap): Connecting to ldap://ipa.swarm64.com:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/raddb/radiusd.conf } # server server default { # from file /etc/raddb/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/raddb/sites-enabled/inner-tunnel:330 } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on proxy address * port 43837 Listening on proxy address :: port 56979 Ready to process requests (0) Received Access-Request Id 40 from 10.0.2.2:57793 to 10.0.2.15:1812 length 179 (0) User-Name = "PRIVATE" (0) NAS-Identifier = "802aa893e8b6" (0) NAS-Port = 0 (0) Called-Station-Id = "82-2A-A8-95-E8-B6:hell0swarm" (0) Calling-Station-Id = "08-E6-89-0E-B6-C4" (0) Framed-MTU = 1400 (0) NAS-Port-Type = Wireless-802.11 (0) Connect-Info = "CONNECT 0Mbps 802.11b" (0) EAP-Message = 0x02110013016d697463682e73756c6c6976616e (0) Message-Authenticator = 0x2ce888a5b88a1f64a3bba17252e1ee69 (0) # Executing section authorize from file /etc/raddb/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "mitch.sullivan", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 17 length 19 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/raddb/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_ttls to process data (0) eap_ttls: Initiating new EAP-TLS session (0) eap_ttls: [eaptls start] = request (0) eap: Sending EAP Request (code 1) ID 18 length 6 (0) eap: EAP session adding &reply:State = 0xb938bff5b92aaa4a (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) # Executing group from file /etc/raddb/sites-enabled/default (0) Challenge { ... } # empty sub-section is ignored (0) Sent Access-Challenge Id 40 from 10.0.2.15:1812 to 10.0.2.2:57793 length 0 (0) EAP-Message = 0x011200061520 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0xb938bff5b92aaa4a056aeaca0b53c293 (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 41 from 10.0.2.2:57793 to 10.0.2.15:1812 length 339 (1) User-Name = "mitch.sullivan" (1) NAS-Identifier = "802aa893e8b6" (1) NAS-Port = 0 (1) Called-Station-Id = "82-2A-A8-95-E8-B6:hell0swarm" (1) Calling-Station-Id = "08-E6-89-0E-B6-C4" (1) Framed-MTU = 1400 (1) NAS-Port-Type = Wireless-802.11 (1) Connect-Info = "CONNECT 0Mbps 802.11b" (1) EAP-Message = 0x021200a115800000009716030100920100008e03035abb6b8e83350c77c09873b809dc9e20570af75ef7c2c3b8891fe282c7c1628e00002c00ffc02cc02bc024c023c00ac009c008c030c02fc028c027c014c013c012009d009c003d003c0035002f000a01000039000a00080006001700180019000b00 (1) State = 0xb938bff5b92aaa4a056aeaca0b53c293 (1) Message-Authenticator = 0x69af12aa9f108a127e6ce26e676635fa (1) session-state: No cached attributes (1) # Executing section authorize from file /etc/raddb/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /(a)\./) { (1) if (&User-Name =~ /(a)\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "mitch.sullivan", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 18 length 161 (1) eap: Continuing tunnel setup (1) [eap] = ok (1) } # authorize = ok (1) Found Auth-Type = eap (1) # Executing group from file /etc/raddb/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0xb938bff5b92aaa4a (1) eap: Finished EAP session with state 0xb938bff5b92aaa4a (1) eap: Previous EAP request found for state 0xb938bff5b92aaa4a, released from the list (1) eap: Peer sent packet with method EAP TTLS (21) (1) eap: Calling submodule eap_ttls to process data (1) eap_ttls: Authenticate (1) eap_ttls: Continuing EAP-TLS (1) eap_ttls: Peer indicated complete TLS record size will be 151 bytes (1) eap_ttls: Got complete TLS record (151 bytes) (1) eap_ttls: [eaptls verify] = length included (1) eap_ttls: (other): before/accept initialization (1) eap_ttls: TLS_accept: before/accept initialization (1) eap_ttls: <<< recv TLS 1.2 [length 0092] (1) eap_ttls: TLS_accept: SSLv3 read client hello A (1) eap_ttls: >>> send TLS 1.2 [length 0039] (1) eap_ttls: TLS_accept: SSLv3 write server hello A (1) eap_ttls: >>> send TLS 1.2 [length 088d] (1) eap_ttls: TLS_accept: SSLv3 write certificate A (1) eap_ttls: >>> send TLS 1.2 [length 014d] (1) eap_ttls: TLS_accept: SSLv3 write key exchange A (1) eap_ttls: >>> send TLS 1.2 [length 0004] (1) eap_ttls: TLS_accept: SSLv3 write server done A (1) eap_ttls: TLS_accept: SSLv3 flush data (1) eap_ttls: TLS_accept: SSLv3 read client certificate A (1) eap_ttls: TLS_accept: Need to read more data: SSLv3 read client key exchange A (1) eap_ttls: TLS_accept: Need to read more data: SSLv3 read client key exchange A (1) eap_ttls: In SSL Handshake Phase (1) eap_ttls: In SSL Accept mode (1) eap_ttls: [eaptls process] = handled (1) eap: Sending EAP Request (code 1) ID 19 length 1004 (1) eap: EAP session adding &reply:State = 0xb938bff5b82baa4a (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) # Executing group from file /etc/raddb/sites-enabled/default (1) Challenge { ... } # empty sub-section is ignored (1) Sent Access-Challenge Id 41 from 10.0.2.15:1812 to 10.0.2.2:57793 length 0 (1) EAP-Message = 0x011303ec15c000000a2b1603030039020000350303a9ba92ba1ee869e774573a3bcd55bf89b7e57b7536b11691a6a1b9867e26a4d000c03000000dff01000100000b000403000102160303088d0b0008890008860003c5308203c1308202a9a003020102020101300d06092a864886f70d01010b050030 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0xb938bff5b82baa4a056aeaca0b53c293 (1) Finished request Waking up in 4.9 seconds. (2) Received Access-Request Id 42 from 10.0.2.2:57793 to 10.0.2.15:1812 length 184 (2) User-Name = "mitch.sullivan" (2) NAS-Identifier = "802aa893e8b6" (2) NAS-Port = 0 (2) Called-Station-Id = "82-2A-A8-95-E8-B6:hell0swarm" (2) Calling-Station-Id = "08-E6-89-0E-B6-C4" (2) Framed-MTU = 1400 (2) NAS-Port-Type = Wireless-802.11 (2) Connect-Info = "CONNECT 0Mbps 802.11b" (2) EAP-Message = 0x021300061500 (2) State = 0xb938bff5b82baa4a056aeaca0b53c293 (2) Message-Authenticator = 0x276bba10619ba2754d0d8569ac713df9 (2) session-state: No cached attributes (2) # Executing section authorize from file /etc/raddb/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /(a)\./) { (2) if (&User-Name =~ /(a)\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "mitch.sullivan", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 19 length 6 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = eap (2) # Executing group from file /etc/raddb/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0xb938bff5b82baa4a (2) eap: Finished EAP session with state 0xb938bff5b82baa4a (2) eap: Previous EAP request found for state 0xb938bff5b82baa4a, released from the list (2) eap: Peer sent packet with method EAP TTLS (21) (2) eap: Calling submodule eap_ttls to process data (2) eap_ttls: Authenticate (2) eap_ttls: Continuing EAP-TLS (2) eap_ttls: Peer ACKed our handshake fragment (2) eap_ttls: [eaptls verify] = request (2) eap_ttls: [eaptls process] = handled (2) eap: Sending EAP Request (code 1) ID 20 length 1004 (2) eap: EAP session adding &reply:State = 0xb938bff5bb2caa4a (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) # Executing group from file /etc/raddb/sites-enabled/default (2) Challenge { ... } # empty sub-section is ignored (2) Sent Access-Challenge Id 42 from 10.0.2.15:1812 to 10.0.2.2:57793 length 0 (2) EAP-Message = 0x011403ec15c000000a2b23805e4d8a2ddc7e25f8e0148d1fc8b6ee49313359a4166de758c9f7d6319d4dc254391900857fe9c5321350e52e1cf40004bb308204b73082039fa003020102020900ee8187b851c53ea0300d06092a864886f70d01010b0500308184310b3009060355040613024445310f30 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0xb938bff5bb2caa4a056aeaca0b53c293 (2) Finished request Waking up in 4.9 seconds. (3) Received Access-Request Id 43 from 10.0.2.2:57793 to 10.0.2.15:1812 length 184 (3) User-Name = "mitch.sullivan" (3) NAS-Identifier = "802aa893e8b6" (3) NAS-Port = 0 (3) Called-Station-Id = "82-2A-A8-95-E8-B6:hell0swarm" (3) Calling-Station-Id = "08-E6-89-0E-B6-C4" (3) Framed-MTU = 1400 (3) NAS-Port-Type = Wireless-802.11 (3) Connect-Info = "CONNECT 0Mbps 802.11b" (3) EAP-Message = 0x021400061500 (3) State = 0xb938bff5bb2caa4a056aeaca0b53c293 (3) Message-Authenticator = 0x0ebfb935074c09e0cf8e9b06d51575af (3) session-state: No cached attributes (3) # Executing section authorize from file /etc/raddb/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /(a)\./) { (3) if (&User-Name =~ /(a)\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "mitch.sullivan", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 20 length 6 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /etc/raddb/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0xb938bff5bb2caa4a (3) eap: Finished EAP session with state 0xb938bff5bb2caa4a (3) eap: Previous EAP request found for state 0xb938bff5bb2caa4a, released from the list (3) eap: Peer sent packet with method EAP TTLS (21) (3) eap: Calling submodule eap_ttls to process data (3) eap_ttls: Authenticate (3) eap_ttls: Continuing EAP-TLS (3) eap_ttls: Peer ACKed our handshake fragment (3) eap_ttls: [eaptls verify] = request (3) eap_ttls: [eaptls process] = handled (3) eap: Sending EAP Request (code 1) ID 21 length 625 (3) eap: EAP session adding &reply:State = 0xb938bff5ba2daa4a (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) # Executing group from file /etc/raddb/sites-enabled/default (3) Challenge { ... } # empty sub-section is ignored (3) Sent Access-Challenge Id 43 from 10.0.2.15:1812 to 10.0.2.2:57793 length 0 (3) EAP-Message = 0x01150271158000000a2bf70d01010b0500038201010057656da77bec697e07a15db071ef53510b58acfd5bb16b0d4fa3b9983fafd781fa075adbebb0f1a7e83fa9f251cd17784c6031ae311c7da76226bad76b53ed9a169407df51abb0d7a42e18933e94d070206a664963bf7bcf632d798616ea946797 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0xb938bff5ba2daa4a056aeaca0b53c293 (3) Finished request Waking up in 4.9 seconds. (4) Received Access-Request Id 44 from 10.0.2.2:57793 to 10.0.2.15:1812 length 314 (4) User-Name = "mitch.sullivan" (4) NAS-Identifier = "802aa893e8b6" (4) NAS-Port = 0 (4) Called-Station-Id = "82-2A-A8-95-E8-B6:hell0swarm" (4) Calling-Station-Id = "08-E6-89-0E-B6-C4" (4) Framed-MTU = 1400 (4) NAS-Port-Type = Wireless-802.11 (4) Connect-Info = "CONNECT 0Mbps 802.11b" (4) EAP-Message = 0x0215008815800000007e16030300461000004241046482a8b543b2d9b8d2e72f7e7df5812c7a34eff35c29db2c2e756ebd23804b5a4c24a15d2ea8c9a9f185c0e59a78a3bea1c9ed005a4c2a4c6d2cc2f52c2ebaa01403030001011603030028e5df197cdec48e6a5f2386be95c6700f0606ab69cd2aff (4) State = 0xb938bff5ba2daa4a056aeaca0b53c293 (4) Message-Authenticator = 0xb331a4f28a554cf3b11a82c0c09c67c8 (4) session-state: No cached attributes (4) # Executing section authorize from file /etc/raddb/sites-enabled/default (4) authorize { (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /(a)\./) { (4) if (&User-Name =~ /(a)\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "mitch.sullivan", looking up realm NULL (4) suffix: No such realm "NULL" (4) [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 21 length 136 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /etc/raddb/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0xb938bff5ba2daa4a (4) eap: Finished EAP session with state 0xb938bff5ba2daa4a (4) eap: Previous EAP request found for state 0xb938bff5ba2daa4a, released from the list (4) eap: Peer sent packet with method EAP TTLS (21) (4) eap: Calling submodule eap_ttls to process data (4) eap_ttls: Authenticate (4) eap_ttls: Continuing EAP-TLS (4) eap_ttls: Peer indicated complete TLS record size will be 126 bytes (4) eap_ttls: Got complete TLS record (126 bytes) (4) eap_ttls: [eaptls verify] = length included (4) eap_ttls: <<< recv TLS 1.2 [length 0046] (4) eap_ttls: TLS_accept: SSLv3 read client key exchange A (4) eap_ttls: TLS_accept: SSLv3 read certificate verify A (4) eap_ttls: <<< recv TLS 1.2 [length 0001] (4) eap_ttls: <<< recv TLS 1.2 [length 0010] (4) eap_ttls: TLS_accept: SSLv3 read finished A (4) eap_ttls: >>> send TLS 1.2 [length 0001] (4) eap_ttls: TLS_accept: SSLv3 write change cipher spec A (4) eap_ttls: >>> send TLS 1.2 [length 0010] (4) eap_ttls: TLS_accept: SSLv3 write finished A (4) eap_ttls: TLS_accept: SSLv3 flush data (4) eap_ttls: (other): SSL negotiation finished successfully (4) eap_ttls: SSL Connection Established (4) eap_ttls: [eaptls process] = handled (4) eap: Sending EAP Request (code 1) ID 22 length 61 (4) eap: EAP session adding &reply:State = 0xb938bff5bd2eaa4a (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) # Executing group from file /etc/raddb/sites-enabled/default (4) Challenge { ... } # empty sub-section is ignored (4) Sent Access-Challenge Id 44 from 10.0.2.15:1812 to 10.0.2.2:57793 length 0 (4) EAP-Message = 0x0116003d15800000003314030300010116030300286f61d365e37761ef674a2ff8c5af83927277ef86e370d9714c2bbe655bc3e61ad1dced6cda3c6e93 (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0xb938bff5bd2eaa4a056aeaca0b53c293 (4) Finished request Waking up in 2.1 seconds. (5) Received Access-Request Id 45 from 10.0.2.2:57793 to 10.0.2.15:1812 length 245 (5) User-Name = "mitch.sullivan" (5) NAS-Identifier = "802aa893e8b6" (5) NAS-Port = 0 (5) Called-Station-Id = "82-2A-A8-95-E8-B6:hell0swarm" (5) Calling-Station-Id = "08-E6-89-0E-B6-C4" (5) Framed-MTU = 1400 (5) NAS-Port-Type = Wireless-802.11 (5) Connect-Info = "CONNECT 0Mbps 802.11b" (5) EAP-Message = 0x021600431580000000391703030034e5df197cdec48e6b14e9d997a3ef7941456ca4ebd3bebe9b401bb253eaea7d1aebb558386984e4037ac1901292c4df80fa8af7c0 (5) State = 0xb938bff5bd2eaa4a056aeaca0b53c293 (5) Message-Authenticator = 0x552c9c377d3d24c784d6f2d990e93452 (5) session-state: No cached attributes (5) # Executing section authorize from file /etc/raddb/sites-enabled/default (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /(a)\./) { (5) if (&User-Name =~ /(a)\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) [chap] = noop (5) [mschap] = noop (5) [digest] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "mitch.sullivan", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) eap: Peer sent EAP Response (code 2) ID 22 length 67 (5) eap: Continuing tunnel setup (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /etc/raddb/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0xb938bff5bd2eaa4a (5) eap: Finished EAP session with state 0xb938bff5bd2eaa4a (5) eap: Previous EAP request found for state 0xb938bff5bd2eaa4a, released from the list (5) eap: Peer sent packet with method EAP TTLS (21) (5) eap: Calling submodule eap_ttls to process data (5) eap_ttls: Authenticate (5) eap_ttls: Continuing EAP-TLS (5) eap_ttls: Peer indicated complete TLS record size will be 57 bytes (5) eap_ttls: Got complete TLS record (57 bytes) (5) eap_ttls: [eaptls verify] = length included (5) eap_ttls: [eaptls process] = ok (5) eap_ttls: Session established. Proceeding to decode tunneled attributes (5) eap_ttls: Got tunneled request (5) eap_ttls: EAP-Message = 0x02000013016d697463682e73756c6c6976616e (5) eap_ttls: FreeRADIUS-Proxied-To = 127.0.0.1 (5) eap_ttls: Got tunneled identity of mitch.sullivan (5) eap_ttls: Setting default EAP type for tunneled EAP session (5) eap_ttls: Sending tunneled request (5) Virtual server inner-tunnel received request (5) EAP-Message = 0x02000013016d697463682e73756c6c6976616e (5) FreeRADIUS-Proxied-To = 127.0.0.1 (5) User-Name = "mitch.sullivan" (5) WARNING: Outer and inner identities are the same. User privacy is compromised. (5) server inner-tunnel { (5) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /(a)\./) { (5) if (&User-Name =~ /(a)\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [chap] = noop (5) [mschap] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "mitch.sullivan", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) update control { (5) &Proxy-To-Realm := LOCAL (5) } # update control = noop (5) eap: Peer sent EAP Response (code 2) ID 0 length 19 (5) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (5) authenticate { (5) eap: Peer sent packet with method EAP Identity (1) (5) eap: Calling submodule eap_gtc to process data (5) eap_gtc: EXPAND Password: (5) eap_gtc: --> Password: (5) eap: Sending EAP Request (code 1) ID 1 length 15 (5) eap: EAP session adding &reply:State = 0x91427604914370d8 (5) [eap] = handled (5) } # authenticate = handled (5) } # server inner-tunnel (5) Virtual server sending reply (5) EAP-Message = 0x0101000f0650617373776f72643a20 (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0x91427604914370d87af3a510de6c033d (5) eap_ttls: Got tunneled Access-Challenge (5) eap: Sending EAP Request (code 1) ID 23 length 63 (5) eap: EAP session adding &reply:State = 0xb938bff5bc2faa4a (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) # Executing group from file /etc/raddb/sites-enabled/default (5) Challenge { ... } # empty sub-section is ignored (5) Sent Access-Challenge Id 45 from 10.0.2.15:1812 to 10.0.2.2:57793 length 0 (5) EAP-Message = 0x0117003f15800000003517030300306f61d365e37761f0a6e5400fc157ca918fd10d59cc8f12c7c6f22335b36a0b515311cd296c6d9942f7e4822ca95e77c4 (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0xb938bff5bc2faa4a056aeaca0b53c293 (5) Finished request Waking up in 1.9 seconds. (6) Received Access-Request Id 46 from 10.0.2.2:57793 to 10.0.2.15:1812 length 241 (6) User-Name = "mitch.sullivan" (6) NAS-Identifier = "802aa893e8b6" (6) NAS-Port = 0 (6) Called-Station-Id = "82-2A-A8-95-E8-B6:hell0swarm" (6) Calling-Station-Id = "08-E6-89-0E-B6-C4" (6) Framed-MTU = 1400 (6) NAS-Port-Type = Wireless-802.11 (6) Connect-Info = "CONNECT 0Mbps 802.11b" (6) EAP-Message = 0x0217003f1580000000351703030030e5df197cdec48e6c2888eeb2781b8ad97d23848e1a5a632ea339aa25353843b8fda0c963c89d4065468f14f039ba7ccd (6) State = 0xb938bff5bc2faa4a056aeaca0b53c293 (6) Message-Authenticator = 0x2f1d651b69fac79c6c38fe9605a709bb (6) session-state: No cached attributes (6) # Executing section authorize from file /etc/raddb/sites-enabled/default (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /(a)\./) { (6) if (&User-Name =~ /(a)\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [preprocess] = ok (6) [chap] = noop (6) [mschap] = noop (6) [digest] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "mitch.sullivan", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) eap: Peer sent EAP Response (code 2) ID 23 length 63 (6) eap: Continuing tunnel setup (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /etc/raddb/sites-enabled/default (6) authenticate { (6) eap: Expiring EAP session with state 0x91427604914370d8 (6) eap: Finished EAP session with state 0xb938bff5bc2faa4a (6) eap: Previous EAP request found for state 0xb938bff5bc2faa4a, released from the list (6) eap: Peer sent packet with method EAP TTLS (21) (6) eap: Calling submodule eap_ttls to process data (6) eap_ttls: Authenticate (6) eap_ttls: Continuing EAP-TLS (6) eap_ttls: Peer indicated complete TLS record size will be 53 bytes (6) eap_ttls: Got complete TLS record (53 bytes) (6) eap_ttls: [eaptls verify] = length included (6) eap_ttls: [eaptls process] = ok (6) eap_ttls: Session established. Proceeding to decode tunneled attributes (6) eap_ttls: Got tunneled request (6) eap_ttls: EAP-Message = 0x0201000f06536f7574686167746531 (6) eap_ttls: FreeRADIUS-Proxied-To = 127.0.0.1 (6) eap_ttls: Sending tunneled request (6) Virtual server inner-tunnel received request (6) EAP-Message = 0x0201000f06536f7574686167746531 (6) FreeRADIUS-Proxied-To = 127.0.0.1 (6) User-Name = "mitch.sullivan" (6) State = 0x91427604914370d87af3a510de6c033d (6) WARNING: Outer and inner identities are the same. User privacy is compromised. (6) server inner-tunnel { (6) session-state: No cached attributes (6) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /(a)\./) { (6) if (&User-Name =~ /(a)\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [chap] = noop (6) [mschap] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "mitch.sullivan", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) update control { (6) &Proxy-To-Realm := LOCAL (6) } # update control = noop (6) eap: Peer sent EAP Response (code 2) ID 1 length 15 (6) eap: No EAP Start, assuming it's an on-going EAP conversation (6) [eap] = updated (6) [files] = noop rlm_ldap (ldap): Reserved connection (0) (6) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (6) ldap: --> (uid=PRIVATE) (6) ldap: Performing search in "PRIVATE" with filter "(PRIVATE)", scope "sub" (6) ldap: Waiting for search result... (6) ldap: User object found at DN "uid=(PRIVATE)" (6) ldap: Processing user attributes (6) ldap: control:Password-With-Header += '{SSHA}h5MDNNZSAO+XIU+/xk/oLfupxBPpbBMjLs7WXA==' rlm_ldap (ldap): Released connection (0) Need 5 more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots used rlm_ldap (ldap): Connecting to PRIVATE rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (6) [ldap] = updated (6) [expiration] = noop (6) [logintime] = noop (6) pap: Converted: &control:Password-With-Header -> &control:SSHA1-Password (6) pap: Removing &control:Password-With-Header (6) pap: Normalizing SSHA1-Password from base64 encoding, 40 bytes -> 28 bytes (6) pap: WARNING: Auth-Type already set. Not setting to PAP (6) [pap] = noop (6) } # authorize = updated (6) Found Auth-Type = eap (6) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (6) authenticate { (6) eap: Expiring EAP session with state 0x91427604914370d8 (6) eap: Finished EAP session with state 0x91427604914370d8 (6) eap: Previous EAP request found for state 0x91427604914370d8, released from the list (6) eap: Peer sent packet with method EAP GTC (6) (6) eap: Calling submodule eap_gtc to process data (6) eap_gtc: # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (6) eap_gtc: Auth-Type PAP { (6) pap: Login attempt with password (6) pap: Comparing with "known-good" SSHA-Password (6) pap: ERROR: SSHA digest does not match "known good" digest (6) pap: Passwords don't match (6) [pap] = reject (6) } # Auth-Type PAP = reject (6) eap: ERROR: Failed continuing EAP GTC (6) session. EAP sub-module failed (6) eap: Sending EAP Failure (code 4) ID 1 length 4 (6) eap: Failed in EAP select (6) [eap] = invalid (6) } # authenticate = invalid (6) Failed to authenticate the user (6) Using Post-Auth-Type Reject (6) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (6) Post-Auth-Type REJECT { (6) attr_filter.access_reject: EXPAND %{User-Name} (6) attr_filter.access_reject: --> mitch.sullivan (6) attr_filter.access_reject: Matched entry DEFAULT at line 11 (6) [attr_filter.access_reject] = updated (6) update outer.session-state { (6) &Module-Failure-Message := &request:Module-Failure-Message -> 'pap: SSHA digest does not match "known good" digest' (6) } # update outer.session-state = noop (6) } # Post-Auth-Type REJECT = updated (6) } # server inner-tunnel (6) Virtual server sending reply (6) EAP-Message = 0x04010004 (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) eap_ttls: Got tunneled Access-Reject (6) eap: ERROR: Failed continuing EAP TTLS (21) session. EAP sub-module failed (6) eap: Sending EAP Failure (code 4) ID 23 length 4 (6) eap: Failed in EAP select (6) [eap] = invalid (6) } # authenticate = invalid (6) Failed to authenticate the user (6) Using Post-Auth-Type Reject (6) # Executing group from file /etc/raddb/sites-enabled/default (6) Post-Auth-Type REJECT { (6) attr_filter.access_reject: EXPAND %{User-Name} (6) attr_filter.access_reject: --> mitch.sullivan (6) attr_filter.access_reject: Matched entry DEFAULT at line 11 (6) [attr_filter.access_reject] = updated (6) [eap] = noop (6) policy remove_reply_message_if_eap { (6) if (&reply:EAP-Message && &reply:Reply-Message) { (6) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (6) else { (6) [noop] = noop (6) } # else = noop (6) } # policy remove_reply_message_if_eap = noop (6) } # Post-Auth-Type REJECT = updated (6) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (6) Sending delayed response (6) Sent Access-Reject Id 46 from 10.0.2.15:1812 to 10.0.2.2:57793 length 44 (6) EAP-Message = 0x04170004 (6) Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 0.8 seconds. (0) Cleaning up request packet ID 40 with timestamp +22 (1) Cleaning up request packet ID 41 with timestamp +22 (2) Cleaning up request packet ID 42 with timestamp +22 (3) Cleaning up request packet ID 43 with timestamp +22 Waking up in 2.8 seconds. (4) Cleaning up request packet ID 44 with timestamp +25 Waking up in 0.1 seconds. (5) Cleaning up request packet ID 45 with timestamp +25 Waking up in 0.1 seconds. (6) Cleaning up request packet ID 46 with timestamp +25 Ready to process requests Thanks Mitch. Mitch.Sullivan mitch.sullivan(a)swarm64.com IT administrator | Swarm64 AS Swarm64 AS Zweigstelle Hive Ullsteinstr. 114 | 12109 Berlin | Germany

2 5

SQL query commits
by mustafa mujahid 28 Mar '18

28 Mar '18

Hi, I wanted to know how the SQL queries defined in sql.conf run "commit" on the DB, right now each time a query is executed on the DB, it is committed as well.. I would like to know if it is possible to send a commit to the DB after say 10 SQL transactions. BR/Mustafa

2 1