- Freeradius-Users - lists.freeradius.org

Auth-Request Packets never making it to FR
by Jay Swearingen 29 Jan '18

29 Jan '18

Hello, Receiving 1812 and 1813 packets at the interface (enp0s7) just fine at server ip address 192.168.1.50: tcpdump -eqntl -i enp0s7 port 1812 f8:32:e4:70:0f:04 > 00:1a:a0:59:ec:f1, IPv4, length 85: 192.168.1.7.51813 > 192.168.1.50.1812: UDP, length 43 f8:32:e4:70:0f:04 > 00:1a:a0:59:ec:f1, IPv4, length 85: 192.168.1.7.51813 > 192.168.1.50.1812: UDP, length 43 f8:32:e4:70:0f:04 > 00:1a:a0:59:ec:f1, IPv4, length 85: 192.168.1.7.51813 > 192.168.1.50.1812: UDP, length 43 f8:32:e4:70:0f:04 > 00:1a:a0:59:ec:f1, IPv4, length 85: 192.168.1.7.51813 > 192.168.1.50.1812: UDP, length 43 f8:32:e4:70:0f:04 > 00:1a:a0:59:ec:f1, IPv4, length 85: 192.168.1.7.51813 > 192.168.1.50.1812: UDP, length 43 f8:32:e4:70:0f:04 > 00:1a:a0:59:ec:f1, IPv4, length 85: 192.168.1.7.51813 > 192.168.1.50.1812: UDP, length 43 …but they are never showing up at freeradius -X. Not getting any response at all and no activity at all in the -X window. Working using localhost but not outside of localhost. Ubuntu Server 17.10 artful Using NTRadPing to generate Authentication Request packets -X debug output below. Any help appreciated. Thanks FreeRADIUS Version 3.0.15 Copyright (C) 1999-2017 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/3.0/dictionary including configuration file /etc/freeradius/3.0/radiusd.conf including configuration file /etc/freeradius/3.0/clients.conf including files in directory /etc/freeradius/3.0/mods-enabled/ including configuration file /etc/freeradius/3.0/mods-enabled/echo including configuration file /etc/freeradius/3.0/mods-enabled/unix including configuration file /etc/freeradius/3.0/mods-enabled/detail including configuration file /etc/freeradius/3.0/mods-enabled/detail.log including configuration file /etc/freeradius/3.0/mods-enabled/unpack including configuration file /etc/freeradius/3.0/mods-enabled/files including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth including configuration file /etc/freeradius/3.0/mods-enabled/passwd including configuration file /etc/freeradius/3.0/mods-enabled/mschap including configuration file /etc/freeradius/3.0/mods-enabled/eap including configuration file /etc/freeradius/3.0/mods-enabled/always including configuration file /etc/freeradius/3.0/mods-enabled/preprocess including configuration file /etc/freeradius/3.0/mods-enabled/expiration including configuration file /etc/freeradius/3.0/mods-enabled/chap including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap including configuration file /etc/freeradius/3.0/mods-enabled/exec including configuration file /etc/freeradius/3.0/mods-enabled/digest including configuration file /etc/freeradius/3.0/mods-enabled/replicate including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients including configuration file /etc/freeradius/3.0/mods-enabled/soh including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp including configuration file /etc/freeradius/3.0/mods-enabled/linelog including configuration file /etc/freeradius/3.0/mods-enabled/utf8 including configuration file /etc/freeradius/3.0/mods-enabled/expr including configuration file /etc/freeradius/3.0/mods-enabled/pap including configuration file /etc/freeradius/3.0/mods-enabled/logintime including configuration file /etc/freeradius/3.0/mods-enabled/radutmp including configuration file /etc/freeradius/3.0/mods-enabled/realm including files in directory /etc/freeradius/3.0/policy.d/ including configuration file /etc/freeradius/3.0/policy.d/operator-name including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/3.0/policy.d/filter including configuration file /etc/freeradius/3.0/policy.d/accounting including configuration file /etc/freeradius/3.0/policy.d/dhcp including configuration file /etc/freeradius/3.0/policy.d/abfab-tr including configuration file /etc/freeradius/3.0/policy.d/eap including configuration file /etc/freeradius/3.0/policy.d/control including configuration file /etc/freeradius/3.0/policy.d/canonicalization including configuration file /etc/freeradius/3.0/policy.d/debug including configuration file /etc/freeradius/3.0/policy.d/cui including files in directory /etc/freeradius/3.0/sites-enabled/ including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel including configuration file /etc/freeradius/3.0/sites-enabled/default main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = no log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### radiusd: #### Loading Clients #### client THEFADDER { ipaddr = 192.168.1.7 require_message_authenticator = yes secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client Router { ipaddr = 192.168.1.1 require_message_authenticator = yes secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client SweenNet { ipaddr = 192.168.1.0 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client WAP_2 { ipaddr = 192.168.1.226 require_message_authenticator = yes secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client WAP_3 { ipaddr = 192.168.1.227 require_message_authenticator = yes secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client Barn_Exterior { ipaddr = 192.168.1.225 require_message_authenticator = yes secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = mschap # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Auth-Type = digest radiusd: #### Instantiating modules #### modules { # Loaded module rlm_exec # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_detail # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files files { filename = "/etc/freeradius/3.0/mods-config/files/authorize" acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy" } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/3.0/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_radutmp # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8 # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } instantiate { } # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/3.0/certs" pem_file_type = yes private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key" certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem" ca_file = "/etc/ssl/certs/ca-certificates.crt" private_key_password = <<< secret >>> dh_file = "/etc/freeradius/3.0/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/3.0/radiusd.conf } # server server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading session {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/3.0/sites-enabled/inner-tunnel:331 } # server inner-tunnel server default { # from file /etc/freeradius/3.0/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading post-auth {...} } # server default radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Ready to process requests

2 1

check valid chap password
by تعلم البرمجة 29 Jan '18

29 Jan '18

I have php page inside default file in freeradius 3.0.11 i can check if valid password pap (Cleartext-Password) But I need Check If Valid Chap And Check If Valid MS-CHAP Can you give me solution ? Sorry if my english is bad

2 9

802.1x MAB
by Tony Gottfridsson 29 Jan '18

29 Jan '18

Hi I'm running a test on FR 3.0.15 to replace VMPS with 802.1x MAB. The initial poc works fine using "users" as below 9cebe82ae8eeCleartext-Password := "9cebe82ae8ee" Tunnel-Type = VLAN, Tunnel-Medium-Type = IEEE-802, Tunnel-Private-Group-ID = 10 Since the short description on using sql is "to mirror the 'users'" settings that's what I went ahead and did by removing unneeded table configs and queries. The above data is easily reproduced with a few "as" and "union"'s. We have a db with mac/vlan so i'm trying to fetch the relevant information from that db. I'm rewriting user name and password in the requst to follow the db's format (lowercase and ":" separators) and it seems like I'm almost home but not quite. The authorize_check_query string currently returns: id,username,attribute,value,op 1,9c:eb:e8:2a:e8:ee,Cleartext-Password,9c:eb:e8:2a:e8:ee,:= 2,9c:eb:e8:2a:e8:ee,Tunnel-Type,VLAN,= 3,9c:eb:e8:2a:e8:ee,Tunnel-Medium-Type,IEEE-802,= 4,9c:eb:e8:2a:e8:ee,Tunnel-Private-Group-ID,99,= To me this is almost exactly a "mirror of the users file content". The query config files talks about ${authreply_table}. Well then it seems using sql it's not just to mirror the "users" file, there is something else needed that the "users" files doesn't need, what data do I need to have in authreply_table to enable the same functionality as the working poc using "users" instead of mysql Auth-Type is indicated in the debug output, No "known good" is indicated but that seems strange since it's clearly there much the same way as it's in the "users". It's pretty obvious to me that I'm missing something really basic here... /Best regards Tony Gottfridsson [Högskolan i Gävle] Högskolan i Gävle, 801 76 Gävle • 026 64 85 00 • www.hig.se<http://www.hig.se> För en hållbar livsmiljö för människan University of Gävle, SE-801 76 Gävle, Sweden • +46 (0) 26 64 85 00 • www.hig.se<http://www.hig.se>

2 1

can't connect to network with md5-password on windows 10
by Hamid Rahman 29 Jan '18

29 Jan '18

why my computer can't connect to network with md5-password ? even though if i use cleartext-password it's can connected. but if i use smartphone or linux it's work. can you help me ? there is freeradius debug : # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "hamid", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[control] returns noop [eap] EAP packet type response id 9 length 64 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop [sql] expand: %{User-Name} -> hamid [sql] sql_set_user escaped user --> 'hamid' rlm_sql (sql): Reserving sql socket id: 0 [sql] expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'hamid' ORDER BY id [sql] User found in radcheck table [sql] expand: SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'hamid' ORDER BY id [sql] expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = 'hamid' ORDER BY priority rlm_sql (sql): Released sql socket id: 0 ++[sql] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] Normalizing MD5-Password from hex encoding [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/mschapv2 [eap] processing type mschapv2 [mschapv2] # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel [mschapv2] +- entering group MS-CHAP {...} [mschap] No Cleartext-Password configured. Cannot create LM-Password. [mschap] No Cleartext-Password configured. Cannot create NT-Password. [mschap] Creating challenge hash with username: hamid [mschap] Told to do MS-CHAPv2 for hamid with NT-Password [mschap] FAILED: No NT/LM-Password. Cannot perform authentication. [mschap] FAILED: MS-CHAP2-Response is incorrect ++[mschap] returns reject [eap] Freeing handler ++[eap] returns reject Failed to authenticate the user. } # server inner-tunnel [peap] Got tunneled reply code 3 MS-CHAP-Error = "\tE=691 R=1" EAP-Message = 0x04090004 Message-Authenticator = 0x00000000000000000000000000000000 [peap] Got tunneled reply RADIUS code 3 MS-CHAP-Error = "\tE=691 R=1" EAP-Message = 0x04090004 Message-Authenticator = 0x00000000000000000000000000000000 [peap] Tunneled authentication was rejected. [peap] FAILURE ++[eap] returns handled Sending Access-Challenge of id 158 to ***.***.***.*** port 32772 EAP-Message = 0x010a002b190017030100200586e482dcc33b2c9280f10597c6fa8734e6afc7046f9a2e08f41cf18a749f4f Message-Authenticator = 0x00000000000000000000000000000000 State = 0xcc3ab30bcb30aa566d0010d0e8ca6221 Finished request 7. Going to the next request Waking up in 3.8 seconds. rad_recv: Access-Request packet from host ***.***.***.*** port 32772, id=159, length=331 User-Name = "hamid" Chargeable-User-Identity = "" Location-Capable = Civix-Location Calling-Station-Id = "94-0c-6d-e1-f1-b4" Called-Station-Id = "58-0a-20-7e-2c-00:annaba4" NAS-Port = 3 Cisco-AVPair = "audit-session-id=c0a81a19000071a65a6ae803" Acct-Session-Id = "5a6ae803/94:0c:6d:e1:f1:b4/34470" Cisco-AVPair = "mDNS=true" NAS-IP-Address = 192.168.35.254 NAS-Identifier = "WLC_2504" Airespace-Wlan-Id = 7 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "35" EAP-Message = 0x020a002b19001703010020b251340da3d5ad94add86f70d3e1b882d6770280ac5d5ab14aa4ab95ec8b91df State = 0xcc3ab30bcb30aa566d0010d0e8ca6221 Message-Authenticator = 0x323eda2ece20e5a64deebab3d52ddb4c # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "hamid", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 10 length 43 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state send tlv failure [peap] Received EAP-TLV response. [peap] The users session was previously rejected: returning reject (again.) [peap] *** This means you need to read the PREVIOUS messages in the debug output [peap] *** to find out the reason why the user was rejected. [peap] *** Look for "reject" or "fail". Those earlier messages will tell you. [peap] *** what went wrong, and how to fix the problem. [eap] Handler failed in EAP/peap [eap] Failed in EAP select ++[eap] returns invalid Failed to authenticate the user. Using Post-Auth-Type Reject # Executing group from file /etc/freeradius/sites-enabled/default +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> hamid attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 8 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 8 Sending Access-Reject of id 159 to 10.237.15.1 port 32772 EAP-Message = 0x040a0004 Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 2.8 seconds. Cleaning up request 0 ID 151 with timestamp +204 Cleaning up request 1 ID 152 with timestamp +204 Cleaning up request 2 ID 153 with timestamp +204 Cleaning up request 3 ID 154 with timestamp +204 Cleaning up request 4 ID 155 with timestamp +204 Waking up in 1.1 seconds. Cleaning up request 5 ID 156 with timestamp +205 Cleaning up request 6 ID 157 with timestamp +205 Cleaning up request 7 ID 158 with timestamp +205 Waking up in 1.0 seconds. Cleaning up request 8 ID 159 with timestamp +205 Ready to process requests. thanks

5 9

Re: Freeradius-Users Digest, Vol 153, Issue 72
by Юра Фролов 27 Jan '18

27 Jan '18

Subject: Re: Errors reading /etc/freeradius/3.0: No such file or directory Message-ID: <27EA1BA5-228C-4851-ABCE-08023E48A7A2(a)deployingradius.com> Content-Type: text/plain; charset=utf-8 > On Jan 26, 2018, at 9:39 AM, Юра Фролов <prostovrn(a)gmail.com> wrote: > > > > Hello, > > I migrate to freeradius 3.0 (from freeradius 2.2) > You should create a *new* configuration for v3. i.e. start with the > default v3 configuration, and gradually port the functionality over from > your v2 configuration. > And test it at every step/ > > Way of files > > configuraton freeradius3.0 have additional subfolder ./3.0, i would like > > to discarding subfolder 3.0 and move conf files to folder freeradius > (as I > > no have sql etc, user`s names saved in files, historicaly inheritence.I > > have many scripts for update users`s files.) > Don't do that. It is a *very* bad idea to have a configuration which is > part v2 and part v3. > It won't work. > > I change one string in file radius.conf to raddbdir = /etc/freeradius/, > > restart freeradius service and received error *Errors reading > > /etc/freeradius/3.0: No such file or directory* > > > > What I should do yet change? And can i change way of configuration files > > to /etc/freeradius? > Throw away all of the v3 changes you made, and start over. Use the > *default configuration* for v3. > Doing that will be MUCH faster than trying to work out what's wrong with > a broken configuration. > Alan DeKok. 2018-01-26 19:43 GMT+03:00 <freeradius-users-request(a)lists.freeradius.org>: > Send Freeradius-Users mailing list submissions to > freeradius-users(a)lists.freeradius.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.freeradius.org/mailman/listinfo/freeradius-users > or, via email, send a message with subject or body 'help' to > freeradius-users-request(a)lists.freeradius.org > > You can reach the person managing the list at > freeradius-users-owner(a)lists.freeradius.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Freeradius-Users digest..." > > > Today's Topics: > > 1. Re: Errors reading /etc/freeradius/3.0: No such file or > directory (Alan DeKok) > 2. Re: Segmentation fault - Radius Accounting (Richard J Palmer) > 3. Re: Segmentation fault - Radius Accounting (Alan DeKok) > 4. Proxy accounting (Richard J Palmer) > 5. Re: Proxy accounting (Alan DeKok) > 6. Re: Proxy accounting (Richard J Palmer) > 7. Re: Proxy accounting (Richard J Palmer) > 8. Compilation Warning - FreeRadius 3.0.16 (Andrea Mucci) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Fri, 26 Jan 2018 09:43:28 -0500 > From: Alan DeKok <aland(a)deployingradius.com> > To: FreeRadius users mailing list > <freeradius-users(a)lists.freeradius.org> > Subject: Re: Errors reading /etc/freeradius/3.0: No such file or > directory > Message-ID: <27EA1BA5-228C-4851-ABCE-08023E48A7A2(a)deployingradius.com> > Content-Type: text/plain; charset=utf-8 > > > > On Jan 26, 2018, at 9:39 AM, Юра Фролов <prostovrn(a)gmail.com> wrote: > > > > Hello, > > I migrate to freeradius 3.0 (from freeradius 2.2) > > You should create a *new* configuration for v3. i.e. start with the > default v3 configuration, and gradually port the functionality over from > your v2 configuration. > > And test it at every step/ > > > Way of files > > configuraton freeradius3.0 have additional subfolder ./3.0, i would like > > to discarding subfolder 3.0 and move conf files to folder freeradius > (as I > > no have sql etc, user`s names saved in files, historicaly inheritence.I > > have many scripts for update users`s files.) > > Don't do that. It is a *very* bad idea to have a configuration which is > part v2 and part v3. > > It won't work. > > Yes, of course i move configuration step by step. It is no problem. > > I change one string in file radius.conf to raddbdir = /etc/freeradius/, > > restart freeradius service and received error *Errors reading > > /etc/freeradius/3.0: No such file or directory* > > > > What I should do yet change? And can i change way of configuration files > > to /etc/freeradius? > > Throw away all of the v3 changes you made, and start over. Use the > *default configuration* for v3. > > Doing that will be MUCH faster than trying to work out what's wrong with > a broken configuration. > I am deleting subfolder ./3.0 and doing relevant change on default v3 configuration (right after install)

1 0

FreeRADIUS 3 and Expired AD Passwords for Wireless Auth
by Trinklein, Jason R 26 Jan '18

26 Jan '18

We are using FR3 for WPA2 Enterprise authentication to our wireless network. We have been having issues with various user devices not prompting for new passwords after the old one expires in AD. Instead, the user simply gets a message that they are “unable to connect to network”. This requires the user to remove the network from their device and re-associate. Sometimes in Windows, the user must delete and reinstall the wireless adapter. I’m unsure if there is something wrong with our FreeRADIUS configuration that is improperly communicating the nature of the authentication failure to the user devices. Does anyone have any suggestions? We are running FreeRADIUS 3 on Ubuntu with winbind (not ntlm_auth) connections to our Active Directory server. It may have nothing to do with our FR3 servers…is anyone else facing similar password expiration challenges? -- Jason Trinklein Wireless Engineering Manager College of Charleston 81 St. Philip Street | Office 311D | Charleston, SC 29403 TrinkleinJ(a)CofC.edu<mailto:TrinkleinJ@CofC.edu> | (843) 300–8009

2 1

Re: Proxy accounting
by Richard J Palmer 26 Jan '18

26 Jan '18

And fixed ... Not quote sure how I managed to be that silly Sorry to bother you on that one Richard On Friday 26/01/2018 at 3:35 pm, Richard J Palmer wrote: > OK I shall have a poke .... > > I *thought* I had that running but it appears I have broken it .... > > Richard >> >> >> --- Original message --- >> Subject: Re: Proxy accounting >> From: Alan DeKok <aland(a)deployingradius.com> >> To: FreeRadius users mailing list >> <freeradius-users(a)lists.freeradius.org> >> Date: Friday, 26/01/2018 3:29 PM >> >> On Jan 26, 2018, at 10:25 AM, Richard J Palmer <richard(a)merula.net> >> wrote: >>> >>> >>> I have some realms that I am running a proxy to another server for >>> auth and accounting. >>> >>> Is there a way with accounting to proxy but also have a copy of the >>> records on the local SQL server (as though they where not proxied) as >>> well as sending them to the remote server. >> >> Yes. Just put "sql" into the "accounting" section. It's still >> run >> when proxying. >> >> If you need to only do that for certain realms, just do: >> >> if (Realm == "a") { >> sql >> } >> >> Alan DeKok. >> >> >> - >> List info/subscribe/unsubscribe? See >> http://www.freeradius.org/list/users.html > > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html

1 0

Re: Proxy accounting
by Richard J Palmer 26 Jan '18

26 Jan '18

OK I shall have a poke .... I *thought* I had that running but it appears I have broken it .... Richard > > --- Original message --- > Subject: Re: Proxy accounting > From: Alan DeKok <aland(a)deployingradius.com> > To: FreeRadius users mailing list > <freeradius-users(a)lists.freeradius.org> > Date: Friday, 26/01/2018 3:29 PM > > On Jan 26, 2018, at 10:25 AM, Richard J Palmer <richard(a)merula.net> > wrote: >> >> I have some realms that I am running a proxy to another server for >> auth and accounting. >> >> Is there a way with accounting to proxy but also have a copy of the >> records on the local SQL server (as though they where not proxied) as >> well as sending them to the remote server. > > Yes. Just put "sql" into the "accounting" section. It's still run > when proxying. > > If you need to only do that for certain realms, just do: > > if (Realm == "a") { > sql > } > > Alan DeKok. > > > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html

1 0

Proxy accounting
by Richard J Palmer 26 Jan '18

26 Jan '18

HI This is slightly related to my last question I have some realms that I am running a proxy to another server for auth and accounting. Is there a way with accounting to proxy but also have a copy of the records on the local SQL server (as though they where not proxied) as well as sending them to the remote server. I don't ned this for auth on the affected realms - but it would be useful to have the session & accounting data local if we could - as it helps us debut issues for customers without having to use their portals ? if you can provide a pointer I'd appreciate it Richard

2 1

Re: Segmentation fault - Radius Accounting
by Richard J Palmer 26 Jan '18

26 Jan '18

HI Alan Thanks for the reply. I shall build the debug version of 3.0.16 (may as well upgrade while I am at it) and restart the server with that later when it is a little quieter and get the logs to you I have no problem with you having the config as it is - but I did't want the full realm list on a public mailing list. There's almost certainly an error in my config somewhere which is triggering this - but If the code should catch it - we may as well use the example to find what stupidity I've managed to achieve that works round the checking Thanks again for your help so far Richard On Friday 26/01/2018 at 2:11 pm, Alan DeKok wrote: > On Jan 26, 2018, at 8:25 AM, Richard J Palmer <richard(a)merula.net> > wrote: >> >> This is 3.0.15 > > Hmm... it *does* check for duplicate realms. > >> >> I can upgrade the server to .16 that's not a problem. Also happy to >> compile a debug version and run here (the server is production with >> real requests - but can happily run in debug mode with the debug >> symbols running. >> >> Also happy to share the log file (ideally privately since it has some >> details of the realms - and client data) in it. > > Sure. Send a copy of proxy.conf && the debug output to me via > email. Change all of the secrets to "testing123"... they don't > matter. > > Alan DeKok. > > > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html

2 1