- Freeradius-Users - lists.freeradius.org

real authenication after upgrade from 30.0.15 to 3.0.16
by Marek Zarychta 30 Jan '18

30 Jan '18

Dear users, after upgrade to 3.0.16, I have issues with realm authentication. All requests proxied to nonlocal realms and authentication requests for users without a realm can still be served. Client sends initial Access-Request and receives Access-Challenge whith "No Message-Authenticator attribute found". See attached diffs of the detailed debug logs: --- log.ok 2018-01-30 14:21:05.093454000 +0100 +++ log.bad 2018-01-30 14:20:34.505666000 +0100 @@ -1,4 +1,4 @@ -FreeRADIUS Version 3.0.15 +FreeRADIUS Version 3.0.16 Copyright (C) 1999-2017 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE @@ -88,7 +88,7 @@ sbindir = "/usr/local/sbin" logdir = "/var/log" run_dir = "/var/run/radiusd" - libdir = "/usr/local/lib/freeradius-3.0.15" + libdir = "/usr/local/lib/freeradius-3.0.16" radacctdir = "/var/log/radacct" hostname_lookups = no max_request_time = 30 @@ -1143,6 +1143,8 @@ cipher_server_preference = no ecdh_curve = "prime256v1" disable_tlsv1_2 = yes + tls_max_version = "" + tls_min_version = "1.0" cache { enable = no lifetime = 24 @@ -1307,9 +1309,9 @@ Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel -Listening on proxy address * port 19369 +Listening on proxy address * port 17390 Ready to process requests -(0) Received Access-Request Id 0 from 10.0.6.253:38291 to 0.0.0.0:1812 length 158 +(0) Received Access-Request Id 0 from 10.0.6.253:56240 to 0.0.0.0:1812 length 158 (0) User-Name = "someuserm(a)some.realm" (0) NAS-IP-Address = 127.0.0.1 (0) Calling-Station-Id = "02-00-00-00-00-01" @@ -1318,7 +1320,7 @@ (0) Service-Type = Framed-User (0) Connect-Info = "CONNECT 11Mbps 802.11b" (0) EAP-Message = 0x0200001b017a617279636874616d4070777374652e6564752e706c -(0) Message-Authenticator = 0x73f14e50279eda60f9b8f887174f8e93 +(0) Message-Authenticator = 0x808acae379001500e79c7ab3a2c83636 (0) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/radius.some.realm (0) authorize { (0) policy filter_username { @@ -1384,7 +1386,7 @@ (0) auth_log: --> /var/log/radacct/10.0.6.253/auth-detail-20180130 (0) auth_log: /var/log/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /var/log/radacct/10.0.6.253/auth-detail-20180130 (0) auth_log: EXPAND %t -(0) auth_log: --> Tue Jan 30 14:21:04 2018 +(0) auth_log: --> Tue Jan 30 14:20:29 2018 (0) [auth_log] = ok (0) [chap] = noop (0) [mschap] = noop @@ -1487,7 +1489,7 @@ (0) pre_proxy_log: --> /var/log/radacct/10.0.6.253/pre-proxy-detail-20180130 (0) pre_proxy_log: /var/log/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d expands to /var/log/radacct/10.0.6.253/pre-proxy-detail-20180130 (0) pre_proxy_log: EXPAND %t -(0) pre_proxy_log: --> Tue Jan 30 14:21:04 2018 +(0) pre_proxy_log: --> Tue Jan 30 14:20:29 2018 (0) [pre_proxy_log] = ok (0) if ("%{Packet-Type}" != "Accounting-Request") { (0) EXPAND %{Packet-Type} @@ -1567,7 +1569,7 @@ (0) auth_log: --> /var/log/radacct/10.0.6.253/auth-detail-20180130 (0) auth_log: /var/log/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /var/log/radacct/10.0.6.253/auth-detail-20180130 (0) auth_log: EXPAND %t -(0) auth_log: --> Tue Jan 30 14:21:04 2018 +(0) auth_log: --> Tue Jan 30 14:20:29 2018 (0) [auth_log] = ok (0) [chap] = noop (0) [mschap] = noop @@ -1585,7 +1587,7 @@ (0) eap_peap: Initiating new EAP-TLS session (0) eap_peap: [eaptls start] = request (0) eap: Sending EAP Request (code 1) ID 1 length 6 -(0) eap: EAP session adding &reply:State = 0xe72255ede7234ce0 +(0) eap: EAP session adding &reply:State = 0xcd2b6be2cd2a720f (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge @@ -1600,7 +1602,7 @@ (0) post_proxy_log: --> /var/log/radacct/10.0.6.253/post-proxy-detail-20180130 (0) post_proxy_log: /var/log/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d expands to /var/log/radacct/10.0.6.253/post-proxy-detail-20180130 (0) post_proxy_log: EXPAND %t -(0) post_proxy_log: --> Tue Jan 30 14:21:04 2018 +(0) post_proxy_log: --> Tue Jan 30 14:20:29 2018 (0) [post_proxy_log] = ok (0) attr_filter.post-proxy: EXPAND %{Realm} (0) attr_filter.post-proxy: --> some.realm @@ -1610,3413 +1612,18 @@ (0) [eap] = noop (0) } # post-proxy = updated (0) } +(0) Clearing existing &reply: attributes +(0) Found Post-Proxy-Type Fail-Authentication +(0) server radius.some.realm { +(0) Post-Proxy-Type sub-section not found. Ignoring. +(0) # Executing group from file /usr/local/etc/raddb/sites-enabled/radius.some.realm +(0) } (0) Using Post-Auth-Type Challenge (0) # Executing group from file /usr/local/etc/raddb/sites-enabled/radius.some.realm (0) Challenge { ... } # empty sub-section is ignored -(0) Sent Access-Challenge Id 0 from 0.0.0.0:1812 to 10.0.6.253:38291 length 0 -(0) EAP-Message = 0x010100061920 -(0) Message-Authenticator = 0x00000000000000000000000000000000 -(0) State = 0xe72255ede7234ce0450d40d020db3d2d +(0) Sent Access-Challenge Id 0 from 0.0.0.0:1812 to 10.0.6.253:56240 length 0 +(0) State = 0x2761a24a7c3ece99bd01e4f7ae40f330 (0) Finished request Waking up in 4.9 seconds. All configuration files are from the previous version. Should I try to reconfigure it with respect to original configuration files from 3.0.16 to work again or is this in some way connected with the bug I found to be fixed in upcoming 3.0.17 version: Bug fixes * Don't call post-proxy twice when proxying to a virtual server. Matthew Newton, #2161. Best regards, -- Marek Zarychta

2 2

Freeradius server: Issue running Radius -X
by doc barton 30 Jan '18

30 Jan '18

I'm using RHEL6 and I've been tasked to build a freeradius server by my organization. Everything is done through VM, so I'm not able to copy and paste info. However, I will type specifically the issue I am having. When I run the radisus -X, I received the following error. Failed binding to dhcp interface lo address 255.255.255.255 port 6700 as server dhcp: Address already in use /etc/raddb/sites-enabled/dhcp[126]: Error binding to port for 255.255.255.255 port 6700 Please assist me with this. Gary

3 2

session-state inside Post-Auth-Type REJECT
by work vlpl 30 Jan '18

30 Jan '18

Hello, I am using 3.0.17 (git #511dfd77d) version. Documentation says what session-state attributes are not available inside Post-Auth-Type REJECT https://github.com/FreeRADIUS/freeradius-server/blob/v3.0.x/raddb/sites-ava… , but in debug log I have access to it. # Executing group from file /usr/local/etc/raddb/sites-enabled/testing-stie (9) Post-Auth-Type REJECT { (9) policy debug_session { (9) if ("%{debug_attr:session-state:}" == '') { (9) Attributes matching "session-state:" (9) &session-state:User-Name := testing_remote (9) EXPAND %{debug_attr:session-state:} (9) --> (9) if ("%{debug_attr:session-state:}" == '') -> TRUE (9) if ("%{debug_attr:session-state:}" == '') { (9) [noop] = noop (9) } # if ("%{debug_attr:session-state:}" == '') = noop (9) } # policy debug_session = noop Is this expected behavior? This is eap request, and I set session state inside inner-tunel like this (7) update outer.session-state { (7) User-Name := &reply:Supplicant-User-Name -> 'testing_remote' (7) } # update outer.session-state = noop -- Vladimir

2 1

RE: Freeradius-Users Digest, Vol 153, Issue 79
by Peter Hutchison 30 Jan '18

30 Jan '18

Message: 1 Date: Mon, 29 Jan 2018 15:32:41 +0000 From: Jay Swearingen <jswearingen(a)vijilant.com> To: "Freeradius-Users(a)lists.freeradius.org" <Freeradius-Users(a)lists.freeradius.org> Subject: Auth-Request Packets never making it to FR >Hello, >Receiving 1812 and 1813 packets at the interface (enp0s7) just fine at server ip address 192.168.1.50: >tcpdump -eqntl -i enp0s7 port 1812 >f8:32:e4:70:0f:04 > 00:1a:a0:59:ec:f1, IPv4, length 85: 192.168.1.7.51813 > 192.168.1.50.1812: UDP, length 43 >f8:32:e4:70:0f:04 > 00:1a:a0:59:ec:f1, IPv4, length 85: 192.168.1.7.51813 > 192.168.1.50.1812: UDP, length 43 >f8:32:e4:70:0f:04 > 00:1a:a0:59:ec:f1, IPv4, length 85: 192.168.1.7.51813 > 192.168.1.50.1812: UDP, length 43 >f8:32:e4:70:0f:04 > 00:1a:a0:59:ec:f1, IPv4, length 85: 192.168.1.7.51813 > 192.168.1.50.1812: UDP, length 43 >f8:32:e4:70:0f:04 > 00:1a:a0:59:ec:f1, IPv4, length 85: 192.168.1.7.51813 > 192.168.1.50.1812: UDP, length 43 >f8:32:e4:70:0f:04 > 00:1a:a0:59:ec:f1, IPv4, length 85: 192.168.1.7.51813 > 192.168.1.50.1812: UDP, length 43 >…but they are never showing up at freeradius -X. Not getting any response at all and no activity at all in the -X window. Working using localhost but not outside of localhost. >Ubuntu Server 17.10 artful A silly question, but is 192.168.1.50 listed in your clients.conf file in freeradius? If the client is not listed, it will never pick it up. Peter Hutchison MCP Senior Network Systems SpecialistS S 01484 473716 Networks Team University of Huddersfield | Queensgate | Huddersfield | HD1 3DH University of Huddersfield inspiring tomorrow's professionals. [http://marketing.hud.ac.uk/_HOSTED/EmailSig2014/EmailSigFooter.jpg] This transmission is confidential and may be legally privileged. If you receive it in error, please notify us immediately by e-mail and remove it from your system. If the content of this e-mail does not relate to the business of the University of Huddersfield, then we do not endorse it and will accept no liability.

2 1

Re: Auth-Request Packets never making it to FR
by Jay Swearingen 29 Jan '18

29 Jan '18

Date: Mon, 29 Jan 2018 10:35:24 -0500 From: Alan DeKok <aland(a)deployingradius.com> To: FreeRadius users mailing list <freeradius-users(a)lists.freeradius.org> Subject: Re: Auth-Request Packets never making it to FR Message-ID: <5B11F8CA-1947-48E8-A25A-771408B57F95(a)deployingradius.com> Content-Type: text/plain; charset=utf-8 On Jan 29, 2018, at 10:32 AM, Jay Swearingen <jswearingen(a)vijilant.com> wrote: > > Receiving 1812 and 1813 packets at the interface (enp0s7) just fine at server ip address 192.168.1.50: > > tcpdump -eqntl -i enp0s7 port 1812 > > f8:32:e4:70:0f:04 > 00:1a:a0:59:ec:f1, IPv4, length 85: > 192.168.1.7.51813 > 192.168.1.50.1812: UDP, length 43 > f8:32:e4:70:0f:04 > 00:1a:a0:59:ec:f1, IPv4, length 85: > 192.168.1.7.51813 > 192.168.1.50.1812: UDP, length 43 > f8:32:e4:70:0f:04 > 00:1a:a0:59:ec:f1, IPv4, length 85: > 192.168.1.7.51813 > 192.168.1.50.1812: UDP, length 43 > f8:32:e4:70:0f:04 > 00:1a:a0:59:ec:f1, IPv4, length 85: > 192.168.1.7.51813 > 192.168.1.50.1812: UDP, length 43 > f8:32:e4:70:0f:04 > 00:1a:a0:59:ec:f1, IPv4, length 85: > 192.168.1.7.51813 > 192.168.1.50.1812: UDP, length 43 > f8:32:e4:70:0f:04 > 00:1a:a0:59:ec:f1, IPv4, length 85: > 192.168.1.7.51813 > 192.168.1.50.1812: UDP, length 43 > > …but they are never showing up at freeradius -X. Not getting any response at all and no activity at all in the -X window. Working using localhost but not outside of localhost. There's a firewall or SeLinux rule which prevents the packets from reaching the RADIUS server. Fix that. There is *nothing* you can do to FreeRADIUS to fix the problem. If the server shows that it's listening on port 1812, then it's listening on port 1812. The only reason it doesn't see packets is if the kernel doesn't send packets to FreeRADIUS. Alan DeKok. ------------------------------------------ Thanks Alan. Previously created firewall rule did not stay persistent. Re-created a simple UFW 1812, 1813 UDP rule and it fixed it. Successful Access-Accept. Feel stupid. Thanks for the reply.

2 1

A strange problem with NAS and pfsense with freeradius.
by Mery Saint 29 Jan '18

29 Jan '18

If insert username and password in: /usr/local/etc/raddb/users"test" Cleartext-Password := "test"is possible to authenticate the client.If use mysql to store username and password:MariaDB [radius]> select * from radcheck;+----+----------+--------------------+----+-------+| id | username | attribute | op | value |+----+----------+--------------------+----+-------+| 1 | test | Cleartext-Password | := | test |+----+----------+--------------------+----+-------+I receive this error:Info: Loaded virtual server <default>Info: Loaded virtual server defaultWarning: Ignoring "sql" (see raddb/mods-available/README.rst)Warning: Ignoring "ldap" (see raddb/mods-available/README.rst)Info: Loaded virtual server inner-tunnel-ttlsInfo: Loaded virtual server inner-tunnel-peapInfo: Ready to process requestsAuth: (8) Login incorrect (mschap: FAILED: No NT/LM-Password. Cannot perform authentication): [test] (from client radius port 0 via TLS tunnel)Info: (9) eap_peap: This means you need to read the PREVIOUS messages in the debug outputInfo: (9) eap_peap: to find out the reason why the user was rejectedInfo: (9) eap_peap: Look for "reject" or "fail". Those earlier messages will tell youInfo: (9) eap_peap: what went wrong, and how to fix the problemAuth: (9) Login incorrect (eap_peap: The users session was previously rejected: returning reject (again.)): [test] (from client radius port 0 cli 48d2246ca4ae) Any idea, please? This is the output of radiusd –X [2.4.2-RELEASE][admin(a)pfSense.localdomain]/var: radiusd -XFreeRADIUS Version 3.0.15Copyright (C) 1999-2017 The FreeRADIUS server project and contributorsThere is NO warranty; not even for MERCHANTABILITY or FITNESS FOR APARTICULAR PURPOSEYou may redistribute copies of FreeRADIUS under the terms of theGNU General Public LicenseFor more information about these matters, see the file named COPYRIGHTStarting - reading configuration files ...including dictionary file /usr/local/share/freeradius/dictionaryincluding dictionary file /usr/local/share/freeradius/dictionary.dhcpincluding dictionary file /usr/local/share/freeradius/dictionary.vqpincluding dictionary file /usr/local/etc/raddb/dictionaryincluding configuration file /usr/local/etc/raddb/radiusd.confincluding configuration file /usr/local/etc/raddb/clients.confincluding files in directory /usr/local/etc/raddb/mods-enabled/including configuration file /usr/local/etc/raddb/mods-enabled/attr_filterincluding configuration file /usr/local/etc/raddb/mods-enabled/cache_eapincluding configuration file /usr/local/etc/raddb/mods-enabled/chapincluding configuration file /usr/local/etc/raddb/mods-enabled/dateincluding configuration file /usr/local/etc/raddb/mods-enabled/detailincluding configuration file /usr/local/etc/raddb/mods-enabled/detail.logincluding configuration file /usr/local/etc/raddb/mods-enabled/dhcpincluding configuration file /usr/local/etc/raddb/mods-enabled/digestincluding configuration file /usr/local/etc/raddb/mods-enabled/dynamic_clientsincluding configuration file /usr/local/etc/raddb/mods-enabled/eapincluding configuration file /usr/local/etc/raddb/mods-enabled/echoincluding configuration file /usr/local/etc/raddb/mods-enabled/execincluding configuration file /usr/local/etc/raddb/mods-enabled/expirationincluding configuration file /usr/local/etc/raddb/mods-enabled/exprincluding configuration file /usr/local/etc/raddb/mods-enabled/filesincluding configuration file /usr/local/etc/raddb/mods-enabled/linelogincluding configuration file /usr/local/etc/raddb/mods-enabled/logintimeincluding configuration file /usr/local/etc/raddb/mods-enabled/mschapincluding configuration file /usr/local/etc/raddb/mods-enabled/ntlm_authincluding configuration file /usr/local/etc/raddb/mods-enabled/papincluding configuration file /usr/local/etc/raddb/mods-enabled/passwdincluding configuration file /usr/local/etc/raddb/mods-enabled/preprocessincluding configuration file /usr/local/etc/raddb/mods-enabled/radutmpincluding configuration file /usr/local/etc/raddb/mods-enabled/realmincluding configuration file /usr/local/etc/raddb/mods-enabled/replicateincluding configuration file /usr/local/etc/raddb/mods-enabled/sohincluding configuration file /usr/local/etc/raddb/mods-enabled/sradutmpincluding configuration file /usr/local/etc/raddb/mods-enabled/alwaysincluding configuration file /usr/local/etc/raddb/mods-enabled/unixincluding configuration file /usr/local/etc/raddb/mods-enabled/unpackincluding configuration file /usr/local/etc/raddb/mods-enabled/utf8including configuration file /usr/local/etc/raddb/mods-enabled/motpincluding configuration file /usr/local/etc/raddb/mods-enabled/googleauthincluding configuration file /usr/local/etc/raddb/mods-enabled/datacounter_acctincluding configuration file /usr/local/etc/raddb/mods-enabled/sqlincluding configuration file /usr/local/etc/raddb/mods-config/sql/main/mysql/queries.confincluding configuration file /usr/local/etc/raddb/mods-enabled/sqlcounterincluding configuration file /usr/local/etc/raddb/mods-config/sql/counter/mysql/dailycounter.confincluding configuration file /usr/local/etc/raddb/mods-config/sql/counter/mysql/monthlycounter.confincluding configuration file /usr/local/etc/raddb/mods-config/sql/counter/mysql/noresetcounter.confincluding configuration file /usr/local/etc/raddb/mods-config/sql/counter/mysql/expire_on_login.confincluding files in directory /usr/local/etc/raddb/policy.d/including configuration file /usr/local/etc/raddb/policy.d/accountingincluding configuration file /usr/local/etc/raddb/policy.d/canonicalizationincluding configuration file /usr/local/etc/raddb/policy.d/controlincluding configuration file /usr/local/etc/raddb/policy.d/cuiincluding configuration file /usr/local/etc/raddb/policy.d/debugincluding configuration file /usr/local/etc/raddb/policy.d/dhcpincluding configuration file /usr/local/etc/raddb/policy.d/eapincluding configuration file /usr/local/etc/raddb/policy.d/filterincluding configuration file /usr/local/etc/raddb/policy.d/moonshot-targeted-idsincluding configuration file /usr/local/etc/raddb/policy.d/operator-nameincluding configuration file /usr/local/etc/raddb/policy.d/abfab-trincluding configuration file /usr/local/etc/raddb/policy.d/pfs_custom_policiesincluding files in directory /usr/local/etc/raddb/sites-enabled/including configuration file /usr/local/etc/raddb/sites-enabled/defaultincluding configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel-ttlsincluding configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel-peapmain {security { allow_core_dumps = no} name = "radiusd" prefix = "/usr/local" localstatedir = "/var" logdir = "/var/log" run_dir = "/var/run"}main { name = "radiusd" prefix = "/usr/local" localstatedir = "/var" sbindir = "/usr/local/sbin" logdir = "/var/log" run_dir = "/var/run" libdir = "/usr/local/lib/freeradius-3.0.15" radacctdir = "/var/log/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/var/run/radiusd.pid" checkrad = "/usr/local/sbin/checkrad" debug_level = 0 proxy_requests = yeslog { stripped_names = no auth = yes auth_badpass = no auth_goodpass = no msg_badpass = "" msg_goodpass = "" colourise = yes msg_denied = "You are already logged in - access denied"}resources {}security { max_attributes = 200 reject_delay = 1.000000 status_server = no}}radiusd: #### Loading Realms and Home Servers ####radiusd: #### Loading Clients ####client radius { ipaddr = * require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "udp" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 }}Debugger not attached# Creating Auth-Type = mschap# Creating Auth-Type = digest# Creating Auth-Type = eap# Creating Auth-Type = PAP# Creating Auth-Type = CHAP# Creating Auth-Type = MS-CHAP# Creating Auth-Type = MOTP# Creating Auth-Type = GOOGLEAUTH# Creating Autz-Type = Status-Server# Creating Acct-Type = Status-Serverradiusd: #### Instantiating modules ####modules { # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/usr/local/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/usr/local/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/usr/local/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/usr/local/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/usr/local/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_cache # Loading module "cache_eap" from file /usr/local/etc/raddb/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_chap # Loading module "chap" from file /usr/local/etc/raddb/mods-enabled/chap # Loaded module rlm_date # Loading module "date" from file /usr/local/etc/raddb/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" utc = no } # Loaded module rlm_detail # Loading module "detail" from file /usr/local/etc/raddb/mods-enabled/detail detail { filename = "/var/log/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "auth_log" from file /usr/local/etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/var/log/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /usr/local/etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/var/log/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_dhcp # Loading module "dhcp" from file /usr/local/etc/raddb/mods-enabled/dhcp # Loaded module rlm_digest # Loading module "digest" from file /usr/local/etc/raddb/mods-enabled/digest # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /usr/local/etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_eap # Loading module "eap" from file /usr/local/etc/raddb/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 4096 } # Loaded module rlm_exec # Loading module "echo" from file /usr/local/etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loading module "exec" from file /usr/local/etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_expiration # Loading module "expiration" from file /usr/local/etc/raddb/mods-enabled/expiration # Loaded module rlm_expr # Loading module "expr" from file /usr/local/etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_files # Loading module "files" from file /usr/local/etc/raddb/mods-enabled/files files { filename = "/usr/local/etc/raddb/mods-config/files/authorize" acctusersfile = "/usr/local/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/usr/local/etc/raddb/mods-config/files/pre-proxy" } # Loaded module rlm_linelog # Loading module "linelog" from file /usr/local/etc/raddb/mods-enabled/linelog linelog { filename = "/var/log/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /usr/local/etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/var/log/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_logintime # Loading module "logintime" from file /usr/local/etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_mschap # Loading module "mschap" from file /usr/local/etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loading module "ntlm_auth" from file /usr/local/etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_pap # Loading module "pap" from file /usr/local/etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /usr/local/etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_preprocess # Loading module "preprocess" from file /usr/local/etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/usr/local/etc/raddb/mods-config/preprocess/huntgroups" hints = "/usr/local/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_radutmp # Loading module "radutmp" from file /usr/local/etc/raddb/mods-enabled/radutmp radutmp { filename = "/var/log/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_realm # Loading module "IPASS" from file /usr/local/etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = yes } # Loading module "suffix" from file /usr/local/etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = yes } # Loading module "realmpercent" from file /usr/local/etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = yes } # Loading module "ntdomain" from file /usr/local/etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\" ignore_default = no ignore_null = yes } # Loaded module rlm_replicate # Loading module "replicate" from file /usr/local/etc/raddb/mods-enabled/replicate # Loaded module rlm_soh # Loading module "soh" from file /usr/local/etc/raddb/mods-enabled/soh soh { dhcp = yes } # Loading module "sradutmp" from file /usr/local/etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_always # Loading module "reject" from file /usr/local/etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /usr/local/etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /usr/local/etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /usr/local/etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /usr/local/etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /usr/local/etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /usr/local/etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /usr/local/etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /usr/local/etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_unix # Loading module "unix" from file /usr/local/etc/raddb/mods-enabled/unix unix { radwtmp = "/var/log/radwtmp" }Creating attribute Unix-Group # Loaded module rlm_unpack # Loading module "unpack" from file /usr/local/etc/raddb/mods-enabled/unpack # Loaded module rlm_utf8 # Loading module "utf8" from file /usr/local/etc/raddb/mods-enabled/utf8 # Loading module "motp" from file /usr/local/etc/raddb/mods-enabled/motp exec motp { wait = yes program = "/usr/local/bin/bash /usr/local/etc/raddb/scripts/otpverify.sh %{request:User-Name} %{request:User-Password} %{reply:MOTP-Init-Secret} %{reply:MOTP-PIN} %{reply:MOTP-Offset}" shell_escape = yes } # Loading module "googleauth" from file /usr/local/etc/raddb/mods-enabled/googleauth exec googleauth { wait = yes program = "/usr/local/etc/raddb/scripts/googleauth.py %{request:User-Name} %{reply:MOTP-Init-Secret} %{reply:MOTP-PIN} %{request:User-Password}" shell_escape = yes } # Loading module "datacounterdaily" from file /usr/local/etc/raddb/mods-enabled/datacounter_acct exec datacounterdaily { wait = yes program = "/bin/sh /usr/local/etc/raddb/scripts/datacounter_acct.sh %{request:User-Name} daily %{request:Acct-Input-Octets} %{request:Acct-Output-Octets} %{request:Acct-Status-Type} %{request:Acct-Session-Id}" shell_escape = yes } # Loading module "datacounterweekly" from file /usr/local/etc/raddb/mods-enabled/datacounter_acct exec datacounterweekly { wait = yes program = "/bin/sh /usr/local/etc/raddb/scripts/datacounter_acct.sh %{request:User-Name} weekly %{request:Acct-Input-Octets} %{request:Acct-Output-Octets} %{request:Acct-Status-Type} %{request:Acct-Session-Id}" shell_escape = yes } # Loading module "datacountermonthly" from file /usr/local/etc/raddb/mods-enabled/datacounter_acct exec datacountermonthly { wait = yes program = "/bin/sh /usr/local/etc/raddb/scripts/datacounter_acct.sh %{request:User-Name} monthly %{request:Acct-Input-Octets} %{request:Acct-Output-Octets} %{request:Acct-Status-Type} %{request:Acct-Session-Id}" shell_escape = yes } # Loading module "datacounterforever" from file /usr/local/etc/raddb/mods-enabled/datacounter_acct exec datacounterforever { wait = yes program = "/bin/sh /usr/local/etc/raddb/scripts/datacounter_acct.sh %{request:User-Name} forever %{request:Acct-Input-Octets} %{request:Acct-Output-Octets} %{request:Acct-Status-Type} %{request:Acct-Session-Id}" shell_escape = yes } # Loaded module rlm_sql # Loading module "sql1" from file /usr/local/etc/raddb/mods-enabled/sql sql sql1 { driver = "rlm_sql_mysql" server = "192.168.1.250" port = 3306 login = "radius" password = <<< secret >>> radius_db = "radius" read_groups = yes read_profiles = yes read_clients = yes delete_stale_sessions = yes sql_user_name = "%{User-Name}" logfile = "/var/log/sqltrace.sql" default_user_profile = "" client_query = "SELECT id, nasname, shortname, type, secret, server FROM nas" authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{sql1-SQL-Group}' ORDER BY id" authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{sql1-SQL-Group}' ORDER BY id" group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority" simul_count_query = "SELECT COUNT(*) FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" accounting { reference = "%{tolower:type.%{Acct-Status-Type}.query}" type { accounting-on { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})" } accounting-off { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})" } start { query = "INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}', FROM_UNIXTIME(%{integer:Event-Timestamp}), FROM_UNIXTIME(%{integer:Event-Timestamp}), NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}')" } interim-update { query = "UPDATE radacct SET acctupdatetime = (@acctupdatetime_old:=acctupdatetime), acctupdatetime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctinterval = %{integer:Event-Timestamp} - UNIX_TIMESTAMP(@acctupdatetime_old), framedipaddress = '%{Framed-IP-Address}', acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'" } stop { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'" } } } post-auth { reference = ".query" query = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')" } }rlm_sql (sql1): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linkedCreating attribute sql1-SQL-Group # Loaded module rlm_sqlcounter # Loading module "dailycounter" from file /usr/local/etc/raddb/mods-enabled/sqlcounter sqlcounter dailycounter { sql_module_instance = "sql" key = "User-Name" query = "SELECT SUM(acctsessiontime - GREATEST((%%b - UNIX_TIMESTAMP(acctstarttime)), 0)) FROM radacct WHERE username = '%{User-Name}' AND UNIX_TIMESTAMP(acctstarttime) + acctsessiontime > '%%b'" reset = "daily" counter_name = "Daily-Session-Time" check_name = "Max-Daily-Session" reply_name = "Session-Timeout" } # Loading module "monthlycounter" from file /usr/local/etc/raddb/mods-enabled/sqlcounter sqlcounter monthlycounter { sql_module_instance = "sql" key = "User-Name" query = "SELECT SUM(acctsessiontime - GREATEST((%%b - UNIX_TIMESTAMP(acctstarttime)), 0)) FROM radacct WHERE username='%{User-Name}' AND UNIX_TIMESTAMP(acctstarttime) + acctsessiontime > '%%b'" reset = "monthly" counter_name = "Monthly-Session-Time" check_name = "Max-Monthly-Session" reply_name = "Session-Timeout" } # Loading module "noresetcounter" from file /usr/local/etc/raddb/mods-enabled/sqlcounter sqlcounter noresetcounter { sql_module_instance = "sql" key = "User-Name" query = "SELECT IFNULL(SUM(AcctSessionTime),0) FROM radacct WHERE UserName='%{User-Name}'" reset = "never" counter_name = "Max-All-Session-Time" check_name = "Max-All-Session" reply_name = "Session-Timeout" } # Loading module "expire_on_login" from file /usr/local/etc/raddb/mods-enabled/sqlcounter sqlcounter expire_on_login { sql_module_instance = "sql" key = "User-Name" query = "SELECT IFNULL( MAX(TIME_TO_SEC(TIMEDIFF(NOW(), acctstarttime))),0) FROM radacct WHERE UserName='%{User-Name}' ORDER BY acctstarttime LIMIT 1;" reset = "never" counter_name = "Expire-After-Initial-Login" check_name = "Expire-After" reply_name = "Session-Timeout" } instantiate { # Instantiating module "expiration" from file /usr/local/etc/raddb/mods-enabled/expiration # Instantiating module "logintime" from file /usr/local/etc/raddb/mods-enabled/logintime # Instantiating module "sql1" from file /usr/local/etc/raddb/mods-enabled/sqlrlm_sql_mysql: libmysql version: 5.6.37 mysql { tls { } warnings = "auto" }rlm_sql (sql1): Attempting to connect to database "radius"rlm_sql (sql1): Initialising connection pool pool { start = 5 min = 3 max = 5 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 60 spread = no }WARNING: Ignoring "spare = 10", forcing to "spare = 2"rlm_sql (sql1): Opening additional connection (0), 1 of 5 pending slots usedrlm_sql_mysql: Starting connect to MySQL serverrlm_sql_mysql: Connected to database 'radius' on 192.168.1.250 via TCP/IP, server version 5.5.5-10.1.26-MariaDB-0+deb9u1, protocol version 10rlm_sql (sql1): Opening additional connection (1), 1 of 4 pending slots usedrlm_sql_mysql: Starting connect to MySQL serverrlm_sql_mysql: Connected to database 'radius' on 192.168.1.250 via TCP/IP, server version 5.5.5-10.1.26-MariaDB-0+deb9u1, protocol version 10rlm_sql (sql1): Opening additional connection (2), 1 of 3 pending slots usedrlm_sql_mysql: Starting connect to MySQL serverrlm_sql_mysql: Connected to database 'radius' on 192.168.1.250 via TCP/IP, server version 5.5.5-10.1.26-MariaDB-0+deb9u1, protocol version 10rlm_sql (sql1): Opening additional connection (3), 1 of 2 pending slots usedrlm_sql_mysql: Starting connect to MySQL serverrlm_sql_mysql: Connected to database 'radius' on 192.168.1.250 via TCP/IP, server version 5.5.5-10.1.26-MariaDB-0+deb9u1, protocol version 10rlm_sql (sql1): Opening additional connection (4), 1 of 1 pending slots usedrlm_sql_mysql: Starting connect to MySQL serverrlm_sql_mysql: Connected to database 'radius' on 192.168.1.250 via TCP/IP, server version 5.5.5-10.1.26-MariaDB-0+deb9u1, protocol version 10rlm_sql (sql1): Processing generate_sql_clientsrlm_sql (sql1) in generate_sql_clients: query is SELECT id, nasname, shortname, type, secret, server FROM nasrlm_sql (sql1): Reserved connection (0)rlm_sql (sql1): Executing select query: SELECT id, nasname, shortname, type, secret, server FROM nasrlm_sql (sql1): Released connection (0) } # Instantiating module "attr_filter.post-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filterreading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filterreading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /usr/local/etc/raddb/mods-enabled/attr_filterreading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/access_reject[/usr/local/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/usr/local/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /usr/local/etc/raddb/mods-enabled/attr_filterreading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /usr/local/etc/raddb/mods-enabled/attr_filterreading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/accounting_response # Instantiating module "cache_eap" from file /usr/local/etc/raddb/mods-enabled/cache_eaprlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "detail" from file /usr/local/etc/raddb/mods-enabled/detail # Instantiating module "auth_log" from file /usr/local/etc/raddb/mods-enabled/detail.logrlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /usr/local/etc/raddb/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log # Instantiating module "eap" from file /usr/local/etc/raddb/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/usr/local/etc/raddb/certs" pem_file_type = yes private_key_file = "/usr/local/etc/raddb/certs/server_key.pem" certificate_file = "/usr/local/etc/raddb/certs/server_cert.pem" ca_file = "/usr/local/etc/raddb/certs/ca_cert.pem" dh_file = "/usr/local/etc/raddb/certs/dh" random_file = "/dev/urandom" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = no url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel-ttls" include_length = yes require_client_cert = no }tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel-peap" soh = no require_client_cert = no }tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "files" from file /usr/local/etc/raddb/mods-enabled/filesreading pairlist file /usr/local/etc/raddb/mods-config/files/authorizereading pairlist file /usr/local/etc/raddb/mods-config/files/accountingreading pairlist file /usr/local/etc/raddb/mods-config/files/pre-proxy # Instantiating module "linelog" from file /usr/local/etc/raddb/mods-enabled/linelog # Instantiating module "log_accounting" from file /usr/local/etc/raddb/mods-enabled/linelog # Instantiating module "mschap" from file /usr/local/etc/raddb/mods-enabled/mschaprlm_mschap (mschap): using internal authentication # Instantiating module "pap" from file /usr/local/etc/raddb/mods-enabled/pap # Instantiating module "etc_passwd" from file /usr/local/etc/raddb/mods-enabled/passwdrlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "preprocess" from file /usr/local/etc/raddb/mods-enabled/preprocessreading pairlist file /usr/local/etc/raddb/mods-config/preprocess/huntgroupsreading pairlist file /usr/local/etc/raddb/mods-config/preprocess/hints # Instantiating module "IPASS" from file /usr/local/etc/raddb/mods-enabled/realm # Instantiating module "suffix" from file /usr/local/etc/raddb/mods-enabled/realm # Instantiating module "realmpercent" from file /usr/local/etc/raddb/mods-enabled/realm # Instantiating module "ntdomain" from file /usr/local/etc/raddb/mods-enabled/realm # Instantiating module "reject" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "fail" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "ok" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "handled" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "invalid" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "userlock" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "notfound" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "noop" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "updated" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "dailycounter" from file /usr/local/etc/raddb/mods-enabled/sqlcounterrlm_sqlcounter: Current Time: 1517073545 [2018-01-27 18:19:05], Prev reset 1517007600 [2018-01-27 00:00:00] # Instantiating module "monthlycounter" from file /usr/local/etc/raddb/mods-enabled/sqlcounterrlm_sqlcounter: Current Time: 1517073545 [2018-01-27 18:19:05], Prev reset 1514761200 [2018-01-01 00:00:00] # Instantiating module "noresetcounter" from file /usr/local/etc/raddb/mods-enabled/sqlcounterrlm_sqlcounter: Current Time: 1517073545 [2018-01-27 18:19:05], Prev reset 0 [2018-01-27 18:00:00] # Instantiating module "expire_on_login" from file /usr/local/etc/raddb/mods-enabled/sqlcounterrlm_sqlcounter: Current Time: 1517073545 [2018-01-27 18:19:05], Prev reset 0 [2018-01-27 18:00:00]} # modulesradiusd: #### Loading Virtual Servers ####server { # from file /usr/local/etc/raddb/radiusd.conf} # serverserver default { # from file /usr/local/etc/raddb/sites-enabled/default# Loading authenticate {...}# Loading authorize {...}# Loading preacct {...}# Loading accounting {...}# Loading session {...}# Loading pre-proxy {...}# Loading post-proxy {...}# Loading post-auth {...}} # server defaultserver inner-tunnel-ttls { # from file /usr/local/etc/raddb/sites-enabled/inner-tunnel-ttls# Loading authenticate {...}# Loading authorize {...}Ignoring "sql" (see raddb/mods-available/README.rst)Ignoring "ldap" (see raddb/mods-available/README.rst)# Loading session {...}# Loading post-proxy {...}# Loading post-auth {...}} # server inner-tunnel-ttlsserver inner-tunnel-peap { # from file /usr/local/etc/raddb/sites-enabled/inner-tunnel-peap# Loading authenticate {...}# Loading authorize {...}# Loading session {...}# Loading post-proxy {...}# Loading post-auth {...}} # server inner-tunnel-peapradiusd: #### Opening IP addresses and Ports ####listen { type = "auth" ipaddr = * port = 1812}listen { type = "acct" ipaddr = * port = 1813}listen { type = "auth" ipaddr = 127.0.0.1 port = 18127}listen { type = "auth" ipaddr = 127.0.0.1 port = 18128}Listening on auth address * port 1812 bound to server defaultListening on acct address * port 1813 bound to server defaultListening on auth address 127.0.0.1 port 18127 bound to server inner-tunnel-ttlsListening on auth address 127.0.0.1 port 18128 bound to server inner-tunnel-peapReady to process requests

3 2

Auth-Request Packets never making it to FR
by Jay Swearingen 29 Jan '18

29 Jan '18

Hello, Receiving 1812 and 1813 packets at the interface (enp0s7) just fine at server ip address 192.168.1.50: tcpdump -eqntl -i enp0s7 port 1812 f8:32:e4:70:0f:04 > 00:1a:a0:59:ec:f1, IPv4, length 85: 192.168.1.7.51813 > 192.168.1.50.1812: UDP, length 43 f8:32:e4:70:0f:04 > 00:1a:a0:59:ec:f1, IPv4, length 85: 192.168.1.7.51813 > 192.168.1.50.1812: UDP, length 43 f8:32:e4:70:0f:04 > 00:1a:a0:59:ec:f1, IPv4, length 85: 192.168.1.7.51813 > 192.168.1.50.1812: UDP, length 43 f8:32:e4:70:0f:04 > 00:1a:a0:59:ec:f1, IPv4, length 85: 192.168.1.7.51813 > 192.168.1.50.1812: UDP, length 43 f8:32:e4:70:0f:04 > 00:1a:a0:59:ec:f1, IPv4, length 85: 192.168.1.7.51813 > 192.168.1.50.1812: UDP, length 43 f8:32:e4:70:0f:04 > 00:1a:a0:59:ec:f1, IPv4, length 85: 192.168.1.7.51813 > 192.168.1.50.1812: UDP, length 43 …but they are never showing up at freeradius -X. Not getting any response at all and no activity at all in the -X window. Working using localhost but not outside of localhost. Ubuntu Server 17.10 artful Using NTRadPing to generate Authentication Request packets -X debug output below. Any help appreciated. Thanks FreeRADIUS Version 3.0.15 Copyright (C) 1999-2017 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/3.0/dictionary including configuration file /etc/freeradius/3.0/radiusd.conf including configuration file /etc/freeradius/3.0/clients.conf including files in directory /etc/freeradius/3.0/mods-enabled/ including configuration file /etc/freeradius/3.0/mods-enabled/echo including configuration file /etc/freeradius/3.0/mods-enabled/unix including configuration file /etc/freeradius/3.0/mods-enabled/detail including configuration file /etc/freeradius/3.0/mods-enabled/detail.log including configuration file /etc/freeradius/3.0/mods-enabled/unpack including configuration file /etc/freeradius/3.0/mods-enabled/files including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth including configuration file /etc/freeradius/3.0/mods-enabled/passwd including configuration file /etc/freeradius/3.0/mods-enabled/mschap including configuration file /etc/freeradius/3.0/mods-enabled/eap including configuration file /etc/freeradius/3.0/mods-enabled/always including configuration file /etc/freeradius/3.0/mods-enabled/preprocess including configuration file /etc/freeradius/3.0/mods-enabled/expiration including configuration file /etc/freeradius/3.0/mods-enabled/chap including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap including configuration file /etc/freeradius/3.0/mods-enabled/exec including configuration file /etc/freeradius/3.0/mods-enabled/digest including configuration file /etc/freeradius/3.0/mods-enabled/replicate including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients including configuration file /etc/freeradius/3.0/mods-enabled/soh including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp including configuration file /etc/freeradius/3.0/mods-enabled/linelog including configuration file /etc/freeradius/3.0/mods-enabled/utf8 including configuration file /etc/freeradius/3.0/mods-enabled/expr including configuration file /etc/freeradius/3.0/mods-enabled/pap including configuration file /etc/freeradius/3.0/mods-enabled/logintime including configuration file /etc/freeradius/3.0/mods-enabled/radutmp including configuration file /etc/freeradius/3.0/mods-enabled/realm including files in directory /etc/freeradius/3.0/policy.d/ including configuration file /etc/freeradius/3.0/policy.d/operator-name including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/3.0/policy.d/filter including configuration file /etc/freeradius/3.0/policy.d/accounting including configuration file /etc/freeradius/3.0/policy.d/dhcp including configuration file /etc/freeradius/3.0/policy.d/abfab-tr including configuration file /etc/freeradius/3.0/policy.d/eap including configuration file /etc/freeradius/3.0/policy.d/control including configuration file /etc/freeradius/3.0/policy.d/canonicalization including configuration file /etc/freeradius/3.0/policy.d/debug including configuration file /etc/freeradius/3.0/policy.d/cui including files in directory /etc/freeradius/3.0/sites-enabled/ including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel including configuration file /etc/freeradius/3.0/sites-enabled/default main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = no log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### radiusd: #### Loading Clients #### client THEFADDER { ipaddr = 192.168.1.7 require_message_authenticator = yes secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client Router { ipaddr = 192.168.1.1 require_message_authenticator = yes secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client SweenNet { ipaddr = 192.168.1.0 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client WAP_2 { ipaddr = 192.168.1.226 require_message_authenticator = yes secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client WAP_3 { ipaddr = 192.168.1.227 require_message_authenticator = yes secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client Barn_Exterior { ipaddr = 192.168.1.225 require_message_authenticator = yes secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = mschap # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Auth-Type = digest radiusd: #### Instantiating modules #### modules { # Loaded module rlm_exec # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_detail # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files files { filename = "/etc/freeradius/3.0/mods-config/files/authorize" acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy" } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/3.0/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_radutmp # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8 # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } instantiate { } # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/3.0/certs" pem_file_type = yes private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key" certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem" ca_file = "/etc/ssl/certs/ca-certificates.crt" private_key_password = <<< secret >>> dh_file = "/etc/freeradius/3.0/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/3.0/radiusd.conf } # server server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading session {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/3.0/sites-enabled/inner-tunnel:331 } # server inner-tunnel server default { # from file /etc/freeradius/3.0/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading post-auth {...} } # server default radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Ready to process requests

2 1

check valid chap password
by تعلم البرمجة 29 Jan '18

29 Jan '18

I have php page inside default file in freeradius 3.0.11 i can check if valid password pap (Cleartext-Password) But I need Check If Valid Chap And Check If Valid MS-CHAP Can you give me solution ? Sorry if my english is bad

2 9

802.1x MAB
by Tony Gottfridsson 29 Jan '18

29 Jan '18

Hi I'm running a test on FR 3.0.15 to replace VMPS with 802.1x MAB. The initial poc works fine using "users" as below 9cebe82ae8eeCleartext-Password := "9cebe82ae8ee" Tunnel-Type = VLAN, Tunnel-Medium-Type = IEEE-802, Tunnel-Private-Group-ID = 10 Since the short description on using sql is "to mirror the 'users'" settings that's what I went ahead and did by removing unneeded table configs and queries. The above data is easily reproduced with a few "as" and "union"'s. We have a db with mac/vlan so i'm trying to fetch the relevant information from that db. I'm rewriting user name and password in the requst to follow the db's format (lowercase and ":" separators) and it seems like I'm almost home but not quite. The authorize_check_query string currently returns: id,username,attribute,value,op 1,9c:eb:e8:2a:e8:ee,Cleartext-Password,9c:eb:e8:2a:e8:ee,:= 2,9c:eb:e8:2a:e8:ee,Tunnel-Type,VLAN,= 3,9c:eb:e8:2a:e8:ee,Tunnel-Medium-Type,IEEE-802,= 4,9c:eb:e8:2a:e8:ee,Tunnel-Private-Group-ID,99,= To me this is almost exactly a "mirror of the users file content". The query config files talks about ${authreply_table}. Well then it seems using sql it's not just to mirror the "users" file, there is something else needed that the "users" files doesn't need, what data do I need to have in authreply_table to enable the same functionality as the working poc using "users" instead of mysql Auth-Type is indicated in the debug output, No "known good" is indicated but that seems strange since it's clearly there much the same way as it's in the "users". It's pretty obvious to me that I'm missing something really basic here... /Best regards Tony Gottfridsson [Högskolan i Gävle] Högskolan i Gävle, 801 76 Gävle • 026 64 85 00 • www.hig.se<http://www.hig.se> För en hållbar livsmiljö för människan University of Gävle, SE-801 76 Gävle, Sweden • +46 (0) 26 64 85 00 • www.hig.se<http://www.hig.se>

2 1

can't connect to network with md5-password on windows 10
by Hamid Rahman 29 Jan '18

29 Jan '18

why my computer can't connect to network with md5-password ? even though if i use cleartext-password it's can connected. but if i use smartphone or linux it's work. can you help me ? there is freeradius debug : # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "hamid", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[control] returns noop [eap] EAP packet type response id 9 length 64 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop [sql] expand: %{User-Name} -> hamid [sql] sql_set_user escaped user --> 'hamid' rlm_sql (sql): Reserving sql socket id: 0 [sql] expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'hamid' ORDER BY id [sql] User found in radcheck table [sql] expand: SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'hamid' ORDER BY id [sql] expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = 'hamid' ORDER BY priority rlm_sql (sql): Released sql socket id: 0 ++[sql] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] Normalizing MD5-Password from hex encoding [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/mschapv2 [eap] processing type mschapv2 [mschapv2] # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel [mschapv2] +- entering group MS-CHAP {...} [mschap] No Cleartext-Password configured. Cannot create LM-Password. [mschap] No Cleartext-Password configured. Cannot create NT-Password. [mschap] Creating challenge hash with username: hamid [mschap] Told to do MS-CHAPv2 for hamid with NT-Password [mschap] FAILED: No NT/LM-Password. Cannot perform authentication. [mschap] FAILED: MS-CHAP2-Response is incorrect ++[mschap] returns reject [eap] Freeing handler ++[eap] returns reject Failed to authenticate the user. } # server inner-tunnel [peap] Got tunneled reply code 3 MS-CHAP-Error = "\tE=691 R=1" EAP-Message = 0x04090004 Message-Authenticator = 0x00000000000000000000000000000000 [peap] Got tunneled reply RADIUS code 3 MS-CHAP-Error = "\tE=691 R=1" EAP-Message = 0x04090004 Message-Authenticator = 0x00000000000000000000000000000000 [peap] Tunneled authentication was rejected. [peap] FAILURE ++[eap] returns handled Sending Access-Challenge of id 158 to ***.***.***.*** port 32772 EAP-Message = 0x010a002b190017030100200586e482dcc33b2c9280f10597c6fa8734e6afc7046f9a2e08f41cf18a749f4f Message-Authenticator = 0x00000000000000000000000000000000 State = 0xcc3ab30bcb30aa566d0010d0e8ca6221 Finished request 7. Going to the next request Waking up in 3.8 seconds. rad_recv: Access-Request packet from host ***.***.***.*** port 32772, id=159, length=331 User-Name = "hamid" Chargeable-User-Identity = "" Location-Capable = Civix-Location Calling-Station-Id = "94-0c-6d-e1-f1-b4" Called-Station-Id = "58-0a-20-7e-2c-00:annaba4" NAS-Port = 3 Cisco-AVPair = "audit-session-id=c0a81a19000071a65a6ae803" Acct-Session-Id = "5a6ae803/94:0c:6d:e1:f1:b4/34470" Cisco-AVPair = "mDNS=true" NAS-IP-Address = 192.168.35.254 NAS-Identifier = "WLC_2504" Airespace-Wlan-Id = 7 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "35" EAP-Message = 0x020a002b19001703010020b251340da3d5ad94add86f70d3e1b882d6770280ac5d5ab14aa4ab95ec8b91df State = 0xcc3ab30bcb30aa566d0010d0e8ca6221 Message-Authenticator = 0x323eda2ece20e5a64deebab3d52ddb4c # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "hamid", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 10 length 43 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state send tlv failure [peap] Received EAP-TLV response. [peap] The users session was previously rejected: returning reject (again.) [peap] *** This means you need to read the PREVIOUS messages in the debug output [peap] *** to find out the reason why the user was rejected. [peap] *** Look for "reject" or "fail". Those earlier messages will tell you. [peap] *** what went wrong, and how to fix the problem. [eap] Handler failed in EAP/peap [eap] Failed in EAP select ++[eap] returns invalid Failed to authenticate the user. Using Post-Auth-Type Reject # Executing group from file /etc/freeradius/sites-enabled/default +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> hamid attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 8 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 8 Sending Access-Reject of id 159 to 10.237.15.1 port 32772 EAP-Message = 0x040a0004 Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 2.8 seconds. Cleaning up request 0 ID 151 with timestamp +204 Cleaning up request 1 ID 152 with timestamp +204 Cleaning up request 2 ID 153 with timestamp +204 Cleaning up request 3 ID 154 with timestamp +204 Cleaning up request 4 ID 155 with timestamp +204 Waking up in 1.1 seconds. Cleaning up request 5 ID 156 with timestamp +205 Cleaning up request 6 ID 157 with timestamp +205 Cleaning up request 7 ID 158 with timestamp +205 Waking up in 1.0 seconds. Cleaning up request 8 ID 159 with timestamp +205 Ready to process requests. thanks

5 9