- Freeradius-Users - lists.freeradius.org

Authorized MAC users stopped authenticating
by R.Geller 28 Dec '17

28 Dec '17

Hi Users. I'm Running 3.0.13 for a while now. I set it up to support cert authentication, as well as authorized MACs. I didn't deploy any clients using certs, only set up with user/pass and authorized MACs. Sometime last week, users couldn't authenticate. I see errors in debug stated there are 2 auth types, I can see the MAC auth is working, but users are failing to authenticate because of EAP failure. At this point, I want to be able to use both MAC / user+pass auth, and if in the future we decide to deploy certs, than allow that too. If we need to disable EAP or certs to get this working, that is an option too. Not sure why it stopped working out of the blue. The radius server hasn't been touched since the initial working config. Any ideas? (0) Received Access-Request Id 168 from 10.2.1.53:41523 to 10.2.2.35:1812 length 218 (0) User-Name = "rbadani" (0) NAS-Identifier = "pakedge" (0) Called-Station-Id = "90-A7-C1-B8-AC-F3:APT-CORP" (0) NAS-Port-Type = Wireless-802.11 (0) Service-Type = Framed-User (0) NAS-Port = 0 (0) Calling-Station-Id = "34-F3-9A-86-59-57" (0) Connect-Info = "CONNECT 0Mbps 802.11b" (0) Acct-Session-Id = "196EB9DAB87DC1A9" (0) Acct-Multi-Session-Id = "A7617A3B4E8A4349" (0) WLAN-Pairwise-Cipher = 1027076 (0) WLAN-Group-Cipher = 1027076 (0) WLAN-AKM-Suite = 1027073 (0) Framed-MTU = 1400 (0) EAP-Message = 0x02e1000c0172626164616e69 (0) Message-Authenticator = 0xa0ce8c9f4fc59786614b51de2a9d2ec5 (0) # Executing section authorize from file /etc/raddb/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) policy rewrite_calling_station_id { (0) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (0) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) -> TRUE (0) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (0) update request { (0) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (0) --> 34-F3-9A-86-59-57 (0) &Calling-Station-Id := 34-F3-9A-86-59-57 (0) } # update request = noop (0) [updated] = updated (0) } # if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) = updated (0) ... skipping else: Preceding "if" was taken (0) } # policy rewrite_calling_station_id = updated (0) authorized_macs: EXPAND %{Calling-Station-ID} (0) authorized_macs: --> 34-F3-9A-86-59-57 (0) authorized_macs: users: Matched entry 34-F3-9A-86-59-57 at line 8 (0) [authorized_macs] = ok (0) if (!ok) { (0) if (!ok) -> FALSE (0) else { (0) update control { (0) Auth-Type := Accept (0) } # update control = noop (0) } # else = noop (0) auth_log: EXPAND /var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (0) auth_log: --> /var/log/radius/radacct/10.2.1.53/auth-detail-20171227 (0) auth_log: /var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /var/log/radius/radacct/10.2.1.53/auth-detail-20171227 (0) auth_log: EXPAND %t (0) auth_log: --> Wed Dec 27 16:56:02 2017 (0) [auth_log] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "rbadani", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 225 length 12 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = Accept (0) Found Auth-Type = eap (0) ERROR: Warning: Found 2 auth-types on request for user 'rbadani' (0) # Executing group from file /etc/raddb/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_md5 to process data (0) eap_md5: Issuing MD5 Challenge (0) eap: Sending EAP Request (code 1) ID 226 length 22 (0) eap: EAP session adding &reply:State = 0x6b29e7526bcbe320 (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) # Executing group from file /etc/raddb/sites-enabled/default (0) Challenge { ... } # empty sub-section is ignored (0) Sent Access-Challenge Id 168 from 10.2.2.35:1812 to 10.2.1.53:41523 length 0 (0) EAP-Message = 0x01e200160410f2c51c0a8574f54c59f1fb4f5448daec (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0x6b29e7526bcbe32030426126b755182c (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 169 from 10.2.1.53:41523 to 10.2.2.35:1812 length 230 (1) User-Name = "rbadani" (1) NAS-Identifier = "pakedge" (1) Called-Station-Id = "90-A7-C1-B8-AC-F3:APT-CORP" (1) NAS-Port-Type = Wireless-802.11 (1) Service-Type = Framed-User (1) NAS-Port = 0 (1) Calling-Station-Id = "34-F3-9A-86-59-57" (1) Connect-Info = "CONNECT 0Mbps 802.11b" (1) Acct-Session-Id = "196EB9DAB87DC1A9" (1) Acct-Multi-Session-Id = "A7617A3B4E8A4349" (1) WLAN-Pairwise-Cipher = 1027076 (1) WLAN-Group-Cipher = 1027076 (1) WLAN-AKM-Suite = 1027073 (1) Framed-MTU = 1400 (1) EAP-Message = 0x02e200060319 (1) State = 0x6b29e7526bcbe32030426126b755182c (1) Message-Authenticator = 0x832b06e0af58a82af454cf2ffc708452 (1) session-state: No cached attributes (1) # Executing section authorize from file /etc/raddb/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /(a)\./) { (1) if (&User-Name =~ /(a)\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) policy rewrite_calling_station_id { (1) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (1) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) -> TRUE (1) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (1) update request { (1) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (1) --> 34-F3-9A-86-59-57 (1) &Calling-Station-Id := 34-F3-9A-86-59-57 (1) } # update request = noop (1) [updated] = updated (1) } # if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) = updated (1) ... skipping else: Preceding "if" was taken (1) } # policy rewrite_calling_station_id = updated (1) authorized_macs: EXPAND %{Calling-Station-ID} (1) authorized_macs: --> 34-F3-9A-86-59-57 (1) authorized_macs: users: Matched entry 34-F3-9A-86-59-57 at line 8 (1) [authorized_macs] = ok (1) if (!ok) { (1) if (!ok) -> FALSE (1) else { (1) update control { (1) Auth-Type := Accept (1) } # update control = noop (1) } # else = noop (1) auth_log: EXPAND /var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (1) auth_log: --> /var/log/radius/radacct/10.2.1.53/auth-detail-20171227 (1) auth_log: /var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /var/log/radius/radacct/10.2.1.53/auth-detail-20171227 (1) auth_log: EXPAND %t (1) auth_log: --> Wed Dec 27 16:56:02 2017 (1) [auth_log] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "rbadani", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 226 length 6 (1) eap: No EAP Start, assuming it's an on-going EAP conversation (1) [eap] = updated (1) files: users: Matched entry rbadani at line 8 (1) [files] = ok (1) [expiration] = noop (1) [logintime] = noop (1) pap: WARNING: Auth-Type already set. Not setting to PAP (1) [pap] = noop (1) } # authorize = updated (1) Found Auth-Type = Accept (1) Found Auth-Type = eap (1) ERROR: Warning: Found 2 auth-types on request for user 'rbadani' (1) # Executing group from file /etc/raddb/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0x6b29e7526bcbe320 (1) eap: Finished EAP session with state 0x6b29e7526bcbe320 (1) eap: Previous EAP request found for state 0x6b29e7526bcbe320, released from the list (1) eap: Peer sent packet with method EAP NAK (3) (1) eap: Found mutually acceptable type PEAP (25) (1) eap: Calling submodule eap_peap to process data (1) eap_peap: Initiating new EAP-TLS session (1) eap_peap: [eaptls start] = request (1) eap: Sending EAP Request (code 1) ID 227 length 6 (1) eap: EAP session adding &reply:State = 0x6b29e7526acafe20 (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) # Executing group from file /etc/raddb/sites-enabled/default (1) Challenge { ... } # empty sub-section is ignored (1) Sent Access-Challenge Id 169 from 10.2.2.35:1812 to 10.2.1.53:41523 length 0 (1) EAP-Message = 0x01e300061920 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0x6b29e7526acafe2030426126b755182c (1) Finished request Waking up in 4.9 seconds. (2) Received Access-Request Id 170 from 10.2.1.53:41523 to 10.2.2.35:1812 length 394 (2) User-Name = "rbadani" (2) NAS-Identifier = "pakedge" (2) Called-Station-Id = "90-A7-C1-B8-AC-F3:APT-CORP" (2) NAS-Port-Type = Wireless-802.11 (2) Service-Type = Framed-User (2) NAS-Port = 0 (2) Calling-Station-Id = "34-F3-9A-86-59-57" (2) Connect-Info = "CONNECT 0Mbps 802.11b" (2) Acct-Session-Id = "196EB9DAB87DC1A9" (2) Acct-Multi-Session-Id = "A7617A3B4E8A4349" (2) WLAN-Pairwise-Cipher = 1027076 (2) WLAN-Group-Cipher = 1027076 (2) WLAN-AKM-Suite = 1027073 (2) Framed-MTU = 1400 (2) EAP-Message = 0x02e300aa1980000000a0160303009b0100009703035a444122e1641f29196378fe1c9196ff77cac7424e30263c29b46a54f4bc39a500002ec02cc02bc030c02f009f009ec024c023c028c027c00ac009c014c013009d009c003d003c0035002f000a0005000401000040000500050100000000000a0008 (2) State = 0x6b29e7526acafe2030426126b755182c (2) Message-Authenticator = 0xe0f5b4a26689126da9c07570236cee15 (2) session-state: No cached attributes (2) # Executing section authorize from file /etc/raddb/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /(a)\./) { (2) if (&User-Name =~ /(a)\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) policy rewrite_calling_station_id { (2) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (2) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) -> TRUE (2) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (2) update request { (2) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (2) --> 34-F3-9A-86-59-57 (2) &Calling-Station-Id := 34-F3-9A-86-59-57 (2) } # update request = noop (2) [updated] = updated (2) } # if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) = updated (2) ... skipping else: Preceding "if" was taken (2) } # policy rewrite_calling_station_id = updated (2) authorized_macs: EXPAND %{Calling-Station-ID} (2) authorized_macs: --> 34-F3-9A-86-59-57 (2) authorized_macs: users: Matched entry 34-F3-9A-86-59-57 at line 8 (2) [authorized_macs] = ok (2) if (!ok) { (2) if (!ok) -> FALSE (2) else { (2) update control { (2) Auth-Type := Accept (2) } # update control = noop (2) } # else = noop (2) auth_log: EXPAND /var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (2) auth_log: --> /var/log/radius/radacct/10.2.1.53/auth-detail-20171227 (2) auth_log: /var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /var/log/radius/radacct/10.2.1.53/auth-detail-20171227 (2) auth_log: EXPAND %t (2) auth_log: --> Wed Dec 27 16:56:02 2017 (2) [auth_log] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "rbadani", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 227 length 170 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = Accept (2) Found Auth-Type = eap (2) ERROR: Warning: Found 2 auth-types on request for user 'rbadani' (2) # Executing group from file /etc/raddb/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0x6b29e7526acafe20 (2) eap: Finished EAP session with state 0x6b29e7526acafe20 (2) eap: Previous EAP request found for state 0x6b29e7526acafe20, released from the list (2) eap: Peer sent packet with method EAP PEAP (25) (2) eap: Calling submodule eap_peap to process data (2) eap_peap: Continuing EAP-TLS (2) eap_peap: Peer indicated complete TLS record size will be 160 bytes (2) eap_peap: Got complete TLS record (160 bytes) (2) eap_peap: [eaptls verify] = length included (2) eap_peap: (other): before/accept initialization (2) eap_peap: TLS_accept: before/accept initialization (2) eap_peap: <<< recv TLS 1.2 [length 009b] (2) eap_peap: TLS_accept: SSLv3 read client hello A (2) eap_peap: >>> send TLS 1.2 [length 0039] (2) eap_peap: TLS_accept: SSLv3 write server hello A (2) eap_peap: >>> send TLS 1.2 [length 0867] (2) eap_peap: TLS_accept: SSLv3 write certificate A (2) eap_peap: >>> send TLS 1.2 [length 014d] (2) eap_peap: TLS_accept: SSLv3 write key exchange A (2) eap_peap: >>> send TLS 1.2 [length 0004] (2) eap_peap: TLS_accept: SSLv3 write server done A (2) eap_peap: TLS_accept: SSLv3 flush data (2) eap_peap: TLS_accept: SSLv3 read client certificate A (2) eap_peap: TLS_accept: Need to read more data: SSLv3 read client key exchange A (2) eap_peap: TLS_accept: Need to read more data: SSLv3 read client key exchange A (2) eap_peap: In SSL Handshake Phase (2) eap_peap: In SSL Accept mode (2) eap_peap: [eaptls process] = handled (2) eap: Sending EAP Request (code 1) ID 228 length 1004 (2) eap: EAP session adding &reply:State = 0x6b29e75269cdfe20 (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) # Executing group from file /etc/raddb/sites-enabled/default (2) Challenge { ... } # empty sub-section is ignored (2) Sent Access-Challenge Id 170 from 10.2.2.35:1812 to 10.2.1.53:41523 length 0 (2) EAP-Message = 0x01e403ec19c000000a0516030300390200003503036ebcda08da00855d6c3903df56f6204584a3ed5ce1f6ec53737cfbbcc0aed45300c03000000dff01000100000b00040300010216030308670b0008630008600003b8308203b43082029ca003020102020103300d06092a864886f70d01010b050030 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0x6b29e75269cdfe2030426126b755182c (2) Finished request Waking up in 4.9 seconds. (3) Received Access-Request Id 171 from 10.2.1.53:41523 to 10.2.2.35:1812 length 230 (3) User-Name = "rbadani" (3) NAS-Identifier = "pakedge" (3) Called-Station-Id = "90-A7-C1-B8-AC-F3:APT-CORP" (3) NAS-Port-Type = Wireless-802.11 (3) Service-Type = Framed-User (3) NAS-Port = 0 (3) Calling-Station-Id = "34-F3-9A-86-59-57" (3) Connect-Info = "CONNECT 0Mbps 802.11b" (3) Acct-Session-Id = "196EB9DAB87DC1A9" (3) Acct-Multi-Session-Id = "A7617A3B4E8A4349" (3) WLAN-Pairwise-Cipher = 1027076 (3) WLAN-Group-Cipher = 1027076 (3) WLAN-AKM-Suite = 1027073 (3) Framed-MTU = 1400 (3) EAP-Message = 0x02e400061900 (3) State = 0x6b29e75269cdfe2030426126b755182c (3) Message-Authenticator = 0x32ce0d06029a65d0b7bde17bbedd6a2d (3) session-state: No cached attributes (3) # Executing section authorize from file /etc/raddb/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /(a)\./) { (3) if (&User-Name =~ /(a)\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) policy rewrite_calling_station_id { (3) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (3) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) -> TRUE (3) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (3) update request { (3) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (3) --> 34-F3-9A-86-59-57 (3) &Calling-Station-Id := 34-F3-9A-86-59-57 (3) } # update request = noop (3) [updated] = updated (3) } # if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) = updated (3) ... skipping else: Preceding "if" was taken (3) } # policy rewrite_calling_station_id = updated (3) authorized_macs: EXPAND %{Calling-Station-ID} (3) authorized_macs: --> 34-F3-9A-86-59-57 (3) authorized_macs: users: Matched entry 34-F3-9A-86-59-57 at line 8 (3) [authorized_macs] = ok (3) if (!ok) { (3) if (!ok) -> FALSE (3) else { (3) update control { (3) Auth-Type := Accept (3) } # update control = noop (3) } # else = noop (3) auth_log: EXPAND /var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (3) auth_log: --> /var/log/radius/radacct/10.2.1.53/auth-detail-20171227 (3) auth_log: /var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /var/log/radius/radacct/10.2.1.53/auth-detail-20171227 (3) auth_log: EXPAND %t (3) auth_log: --> Wed Dec 27 16:56:02 2017 (3) [auth_log] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "rbadani", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 228 length 6 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = Accept (3) Found Auth-Type = eap (3) ERROR: Warning: Found 2 auth-types on request for user 'rbadani' (3) # Executing group from file /etc/raddb/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0x6b29e75269cdfe20 (3) eap: Finished EAP session with state 0x6b29e75269cdfe20 (3) eap: Previous EAP request found for state 0x6b29e75269cdfe20, released from the list (3) eap: Peer sent packet with method EAP PEAP (25) (3) eap: Calling submodule eap_peap to process data (3) eap_peap: Continuing EAP-TLS (3) eap_peap: Peer ACKed our handshake fragment (3) eap_peap: [eaptls verify] = request (3) eap_peap: [eaptls process] = handled (3) eap: Sending EAP Request (code 1) ID 229 length 1000 (3) eap: EAP session adding &reply:State = 0x6b29e75268ccfe20 (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) # Executing group from file /etc/raddb/sites-enabled/default (3) Challenge { ... } # empty sub-section is ignored (3) Sent Access-Challenge Id 171 from 10.2.2.35:1812 to 10.2.1.53:41523 length 0 (3) EAP-Message = 0x01e503e8194071011954c4fbd3ea40e221db1dc5d77725bc6912e81c7f2ade46e59bab56d3bd12d1210004a23082049e30820386a003020102020900fb9eca29e490e9c3300d06092a864886f70d01010b0500307d310b3009060355040613025553310b300906035504080c024341310b300906035504 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0x6b29e75268ccfe2030426126b755182c (3) Finished request Waking up in 4.9 seconds. (4) Received Access-Request Id 172 from 10.2.1.53:41523 to 10.2.2.35:1812 length 230 (4) User-Name = "rbadani" (4) NAS-Identifier = "pakedge" (4) Called-Station-Id = "90-A7-C1-B8-AC-F3:APT-CORP" (4) NAS-Port-Type = Wireless-802.11 (4) Service-Type = Framed-User (4) NAS-Port = 0 (4) Calling-Station-Id = "34-F3-9A-86-59-57" (4) Connect-Info = "CONNECT 0Mbps 802.11b" (4) Acct-Session-Id = "196EB9DAB87DC1A9" (4) Acct-Multi-Session-Id = "A7617A3B4E8A4349" (4) WLAN-Pairwise-Cipher = 1027076 (4) WLAN-Group-Cipher = 1027076 (4) WLAN-AKM-Suite = 1027073 (4) Framed-MTU = 1400 (4) EAP-Message = 0x02e500061900 (4) State = 0x6b29e75268ccfe2030426126b755182c (4) Message-Authenticator = 0x7739a6384734a45ec44ace0b45406285 (4) session-state: No cached attributes (4) # Executing section authorize from file /etc/raddb/sites-enabled/default (4) authorize { (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /(a)\./) { (4) if (&User-Name =~ /(a)\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) policy rewrite_calling_station_id { (4) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (4) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) -> TRUE (4) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (4) update request { (4) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (4) --> 34-F3-9A-86-59-57 (4) &Calling-Station-Id := 34-F3-9A-86-59-57 (4) } # update request = noop (4) [updated] = updated (4) } # if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) = updated (4) ... skipping else: Preceding "if" was taken (4) } # policy rewrite_calling_station_id = updated (4) authorized_macs: EXPAND %{Calling-Station-ID} (4) authorized_macs: --> 34-F3-9A-86-59-57 (4) authorized_macs: users: Matched entry 34-F3-9A-86-59-57 at line 8 (4) [authorized_macs] = ok (4) if (!ok) { (4) if (!ok) -> FALSE (4) else { (4) update control { (4) Auth-Type := Accept (4) } # update control = noop (4) } # else = noop (4) auth_log: EXPAND /var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (4) auth_log: --> /var/log/radius/radacct/10.2.1.53/auth-detail-20171227 (4) auth_log: /var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /var/log/radius/radacct/10.2.1.53/auth-detail-20171227 (4) auth_log: EXPAND %t (4) auth_log: --> Wed Dec 27 16:56:02 2017 (4) [auth_log] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "rbadani", looking up realm NULL (4) suffix: No such realm "NULL" (4) [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 229 length 6 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = Accept (4) Found Auth-Type = eap (4) ERROR: Warning: Found 2 auth-types on request for user 'rbadani' (4) # Executing group from file /etc/raddb/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0x6b29e75268ccfe20 (4) eap: Finished EAP session with state 0x6b29e75268ccfe20 (4) eap: Previous EAP request found for state 0x6b29e75268ccfe20, released from the list (4) eap: Peer sent packet with method EAP PEAP (25) (4) eap: Calling submodule eap_peap to process data (4) eap_peap: Continuing EAP-TLS (4) eap_peap: Peer ACKed our handshake fragment (4) eap_peap: [eaptls verify] = request (4) eap_peap: [eaptls process] = handled (4) eap: Sending EAP Request (code 1) ID 230 length 583 (4) eap: EAP session adding &reply:State = 0x6b29e7526fcffe20 (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) # Executing group from file /etc/raddb/sites-enabled/default (4) Challenge { ... } # empty sub-section is ignored (4) Sent Access-Challenge Id 172 from 10.2.2.35:1812 to 10.2.1.53:41523 length 0 (4) EAP-Message = 0x01e60247190073f384abcce0dc6bd99d41c7308a2ec286779db1ac2b4a9fa101913c9eff54715a9f99e2d2e6d6216d873cbac8894daa5fb56c68bf9bac69bbe516b2b8b0e0f187ffaca6abb8a1065d90af0d81b75ed06b75ef6c624c8e41b5f461944111a9bdbe4004178fdf81b1220f11bd3db9bc26a9 (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0x6b29e7526fcffe2030426126b755182c (4) Finished request Waking up in 4.9 seconds. (5) Received Access-Request Id 173 from 10.2.1.53:41523 to 10.2.2.35:1812 length 360 (5) User-Name = "rbadani" (5) NAS-Identifier = "pakedge" (5) Called-Station-Id = "90-A7-C1-B8-AC-F3:APT-CORP" (5) NAS-Port-Type = Wireless-802.11 (5) Service-Type = Framed-User (5) NAS-Port = 0 (5) Calling-Station-Id = "34-F3-9A-86-59-57" (5) Connect-Info = "CONNECT 0Mbps 802.11b" (5) Acct-Session-Id = "196EB9DAB87DC1A9" (5) Acct-Multi-Session-Id = "A7617A3B4E8A4349" (5) WLAN-Pairwise-Cipher = 1027076 (5) WLAN-Group-Cipher = 1027076 (5) WLAN-AKM-Suite = 1027073 (5) Framed-MTU = 1400 (5) EAP-Message = 0x02e6008819800000007e1603030046100000424104d33c0ca6bed2496ed0ad157f243201b932ed73853b41b8def5f71764e3a434e98d15d1477fc921b14b1737929024dd22964795dc547dfad5ba1f6eaa05df358e140303000101160303002800000000000000005130785f81b63c506013130a51fa52 (5) State = 0x6b29e7526fcffe2030426126b755182c (5) Message-Authenticator = 0x542305e6de3e64f4761fd45c4254dd66 (5) session-state: No cached attributes (5) # Executing section authorize from file /etc/raddb/sites-enabled/default (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /(a)\./) { (5) if (&User-Name =~ /(a)\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) policy rewrite_calling_station_id { (5) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (5) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) -> TRUE (5) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (5) update request { (5) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (5) --> 34-F3-9A-86-59-57 (5) &Calling-Station-Id := 34-F3-9A-86-59-57 (5) } # update request = noop (5) [updated] = updated (5) } # if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) = updated (5) ... skipping else: Preceding "if" was taken (5) } # policy rewrite_calling_station_id = updated (5) authorized_macs: EXPAND %{Calling-Station-ID} (5) authorized_macs: --> 34-F3-9A-86-59-57 (5) authorized_macs: users: Matched entry 34-F3-9A-86-59-57 at line 8 (5) [authorized_macs] = ok (5) if (!ok) { (5) if (!ok) -> FALSE (5) else { (5) update control { (5) Auth-Type := Accept (5) } # update control = noop (5) } # else = noop (5) auth_log: EXPAND /var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (5) auth_log: --> /var/log/radius/radacct/10.2.1.53/auth-detail-20171227 (5) auth_log: /var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /var/log/radius/radacct/10.2.1.53/auth-detail-20171227 (5) auth_log: EXPAND %t (5) auth_log: --> Wed Dec 27 16:56:02 2017 (5) [auth_log] = ok (5) [chap] = noop (5) [mschap] = noop (5) [digest] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "rbadani", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) eap: Peer sent EAP Response (code 2) ID 230 length 136 (5) eap: Continuing tunnel setup (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = Accept (5) Found Auth-Type = eap (5) ERROR: Warning: Found 2 auth-types on request for user 'rbadani' (5) # Executing group from file /etc/raddb/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0x6b29e7526fcffe20 (5) eap: Finished EAP session with state 0x6b29e7526fcffe20 (5) eap: Previous EAP request found for state 0x6b29e7526fcffe20, released from the list (5) eap: Peer sent packet with method EAP PEAP (25) (5) eap: Calling submodule eap_peap to process data (5) eap_peap: Continuing EAP-TLS (5) eap_peap: Peer indicated complete TLS record size will be 126 bytes (5) eap_peap: Got complete TLS record (126 bytes) (5) eap_peap: [eaptls verify] = length included (5) eap_peap: <<< recv TLS 1.2 [length 0046] (5) eap_peap: TLS_accept: SSLv3 read client key exchange A (5) eap_peap: TLS_accept: SSLv3 read certificate verify A (5) eap_peap: <<< recv TLS 1.2 [length 0001] (5) eap_peap: <<< recv TLS 1.2 [length 0010] (5) eap_peap: TLS_accept: SSLv3 read finished A (5) eap_peap: >>> send TLS 1.2 [length 0001] (5) eap_peap: TLS_accept: SSLv3 write change cipher spec A (5) eap_peap: >>> send TLS 1.2 [length 0010] (5) eap_peap: TLS_accept: SSLv3 write finished A (5) eap_peap: TLS_accept: SSLv3 flush data (5) eap_peap: (other): SSL negotiation finished successfully (5) eap_peap: SSL Connection Established (5) eap_peap: [eaptls process] = handled (5) eap: Sending EAP Request (code 1) ID 231 length 57 (5) eap: EAP session adding &reply:State = 0x6b29e7526ecefe20 (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) # Executing group from file /etc/raddb/sites-enabled/default (5) Challenge { ... } # empty sub-section is ignored (5) Sent Access-Challenge Id 173 from 10.2.2.35:1812 to 10.2.1.53:41523 length 0 (5) EAP-Message = 0x01e7003919001403030001011603030028dadb4eb42e0085becbd6fd6994801f5313c33c66c9cc80d3a42272a0d39d7b73ddc03b6589312f87 (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0x6b29e7526ecefe2030426126b755182c (5) Finished request Waking up in 4.9 seconds. (6) Received Access-Request Id 174 from 10.2.1.53:41523 to 10.2.2.35:1812 length 265 (6) User-Name = "rbadani" (6) NAS-Identifier = "pakedge" (6) Called-Station-Id = "90-A7-C1-B8-AC-F3:APT-CORP" (6) NAS-Port-Type = Wireless-802.11 (6) Service-Type = Framed-User (6) NAS-Port = 0 (6) Calling-Station-Id = "34-F3-9A-86-59-57" (6) Connect-Info = "CONNECT 0Mbps 802.11b" (6) Acct-Session-Id = "196EB9DAB87DC1A9" (6) Acct-Multi-Session-Id = "A7617A3B4E8A4349" (6) WLAN-Pairwise-Cipher = 1027076 (6) WLAN-Group-Cipher = 1027076 (6) WLAN-AKM-Suite = 1027073 (6) Framed-MTU = 1400 (6) EAP-Message = 0x02e7002919800000001f150303001a000000000000000183535c188c7891749e86843fccb8f9afccd7 (6) State = 0x6b29e7526ecefe2030426126b755182c (6) Message-Authenticator = 0x51b7e34c9a113e47185fa29ed2265939 (6) session-state: No cached attributes (6) # Executing section authorize from file /etc/raddb/sites-enabled/default (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /(a)\./) { (6) if (&User-Name =~ /(a)\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [preprocess] = ok (6) policy rewrite_calling_station_id { (6) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (6) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) -> TRUE (6) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (6) update request { (6) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (6) --> 34-F3-9A-86-59-57 (6) &Calling-Station-Id := 34-F3-9A-86-59-57 (6) } # update request = noop (6) [updated] = updated (6) } # if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) = updated (6) ... skipping else: Preceding "if" was taken (6) } # policy rewrite_calling_station_id = updated (6) authorized_macs: EXPAND %{Calling-Station-ID} (6) authorized_macs: --> 34-F3-9A-86-59-57 (6) authorized_macs: users: Matched entry 34-F3-9A-86-59-57 at line 8 (6) [authorized_macs] = ok (6) if (!ok) { (6) if (!ok) -> FALSE (6) else { (6) update control { (6) Auth-Type := Accept (6) } # update control = noop (6) } # else = noop (6) auth_log: EXPAND /var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (6) auth_log: --> /var/log/radius/radacct/10.2.1.53/auth-detail-20171227 (6) auth_log: /var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /var/log/radius/radacct/10.2.1.53/auth-detail-20171227 (6) auth_log: EXPAND %t (6) auth_log: --> Wed Dec 27 16:56:02 2017 (6) [auth_log] = ok (6) [chap] = noop (6) [mschap] = noop (6) [digest] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "rbadani", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) eap: Peer sent EAP Response (code 2) ID 231 length 41 (6) eap: Continuing tunnel setup (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = Accept (6) Found Auth-Type = eap (6) ERROR: Warning: Found 2 auth-types on request for user 'rbadani' (6) # Executing group from file /etc/raddb/sites-enabled/default (6) authenticate { (6) eap: Expiring EAP session with state 0x6b29e7526ecefe20 (6) eap: Finished EAP session with state 0x6b29e7526ecefe20 (6) eap: Previous EAP request found for state 0x6b29e7526ecefe20, released from the list (6) eap: Peer sent packet with method EAP PEAP (25) (6) eap: Calling submodule eap_peap to process data (6) eap_peap: Continuing EAP-TLS (6) eap_peap: Peer indicated complete TLS record size will be 31 bytes (6) eap_peap: Got complete TLS record (31 bytes) (6) eap_peap: [eaptls verify] = length included (6) eap_peap: <<< recv TLS 1.2 [length 0002] (6) eap_peap: ERROR: TLS Alert read:fatal:access denied (6) eap_peap: WARNING: No data inside of the tunnel (6) eap_peap: [eaptls process] = ok (6) eap_peap: Session established. Decoding tunneled attributes (6) eap_peap: PEAP state ? (6) eap_peap: ERROR: Tunneled data is invalid (6) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module failed (6) eap: Sending EAP Failure (code 4) ID 231 length 4 (6) eap: Failed in EAP select (6) [eap] = invalid (6) } # authenticate = invalid (6) Failed to authenticate the user (6) Login incorrect (Warning: Found 2 auth-types on request for user 'rbadani'): [rbadani] (from client 10.2.1.53 port 0 cli 34-F3-9A-86-59-57) (6) Using Post-Auth-Type Reject (6) # Executing group from file /etc/raddb/sites-enabled/default (6) Post-Auth-Type REJECT { (6) attr_filter.access_reject: EXPAND %{User-Name} (6) attr_filter.access_reject: --> rbadani (6) attr_filter.access_reject: Matched entry DEFAULT at line 11 (6) [attr_filter.access_reject] = updated (6) [eap] = noop (6) policy remove_reply_message_if_eap { (6) if (&reply:EAP-Message && &reply:Reply-Message) { (6) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (6) else { (6) [noop] = noop (6) } # else = noop (6) } # policy remove_reply_message_if_eap = noop (6) } # Post-Auth-Type REJECT = updated (6) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (6) Sending delayed response (6) Sent Access-Reject Id 174 from 10.2.2.35:1812 to 10.2.1.53:41523 length 44 (6) EAP-Message = 0x04e70004 (6) Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.9 seconds. (0) Cleaning up request packet ID 168 with timestamp +43 (1) Cleaning up request packet ID 169 with timestamp +43 (2) Cleaning up request packet ID 170 with timestamp +43 (3) Cleaning up request packet ID 171 with timestamp +43 (4) Cleaning up request packet ID 172 with timestamp +43 (5) Cleaning up request packet ID 173 with timestamp +43 (6) Cleaning up request packet ID 174 with timestamp +43 Ready to process requests

2 1

RADIUS config
by kiran kumar 28 Dec '17

28 Dec '17

Hello, Is there any way to return from a section in radiusd.conf without fall through. Eg: preacct { detail if(condition) { return from this section } module1 module2 } I don't want the request to go through module1 & module2 if the condition is met. Is there any way to do this ? Thanks

2 1

rlm_perl + redis database
by Bassem Mettichi 28 Dec '17

28 Dec '17

hello, iam actuyally using redis database to store data, i need your help to implement a perl function to connect to redis database and using it for atthentication mean access requests ( autorisation and authentication) please could someoene give a hand and help me i have any idea about perl programming. Best regards Mettichi Bassem

2 1

(pfSense + Android): eap_tls: ERROR: TLS Alert read:fatal:certificate unknown + eap_tls: ERROR: TLS_accept: Failed in SSLv3 read client certificate A + eap_tls: ERROR: Failed in __FUNCTION__ (SSL_read)
by noob 27 Dec '17

27 Dec '17

Hello, This is FreeRadius 3.0.15 (in the FreeRadius3 package on pfSense 2.3.5-p1). What has worked fine and suddenly stops working is EAP-TLS, with my Huawei Honor8 Pro Android 7.0 smartphone. Small background: my main pfSense box broke down, so I took my backup pfSense box, reinstalled pfSense, *created new CA certificate, Server certificate and User certificate*, connected my smartphone with USB cable to my PC, copied the CA cert and the User cert to the smartphone, installed them using the normal Android setting for that ('install certificates from SD card'), configured the Wireless Connection in Android, in FreeRadius told it to of course use the CA certificate and the Server certificate, customized the other settings, and. for 6 hours now I'm trying to get something to work that does not want to work. But worked yesterday --- and the years before it. Now, EAP-TLS doesn't work. If I try a simple username and password: that works. It's simply the certificates that doesn't work. Those are the errors: Wed Dec 27 01:20:58 2017 : ERROR: (5) eap_tls: ERROR: TLS Alert read:fatal:certificate unknown Wed Dec 27 01:20:58 2017 : ERROR: (5) eap_tls: ERROR: TLS_accept: Failed in SSLv3 read client certificate A Wed Dec 27 01:20:58 2017 : ERROR: (5) eap_tls: ERROR: Failed in __FUNCTION__ (SSL_read) Just to make sure: the certificate manager in pfSense generates all three certificates *and stores them*, and the FreeRadius package within the same pfSense uses two of these three certificates (once you tell you point the package to the right certificates you generate, which I did). Meaning: it's all integrated. This first error: to who is the certificate unknown? To the smartphone? I've imported it 50.000 times again, and again, and again (really). I hope somebody can help me, because it all worked for years, and I have no clue anymore what to do, after all these long hours L Thank you, Bye, PS I attached the debug log.

3 4

rlm_perl
by Bassem Mettichi 27 Dec '17

27 Dec '17

Hello, i have configured rlm_perl for accounting and autorisation but only accounting is working i have tow questions please: 1- where rlm_perl store data when an accounting start comes to freeradius? 2 - how to configure authentication with rlm_perl? Best Regards Mettichi Bassem

1 0

(no subject)
by Bassem Mettichi 27 Dec '17

27 Dec '17

Hello, I have used mysql with freeradius for a long time but i have a problem of performance it is time to use a memory database like redis i store the msisdn and ip of my customers then this customer will send an access request to my freeradius server to authenticate so my question is simple as iam storing my data ip and msisdn in redis how to configure authorisation in redis module in freeradius server to authenticate my customers Thanks in advance Best Regards Mettichi Bassem

5 5

Reg. MD-5 & TLS as Inner EAP Methods Configuration
by Manoj Reddy 26 Dec '17

26 Dec '17

Hello, I'm new to FreeRadius, i have successfully configureed and tested EAP-TLS,EAP-PEAPv0 & EAP-TTLS. I need help in configuring MD-5 & TLS as inner EAP methods for EAP-PEAP/EAP-TTLS. Please help me in this regard. -- Best Regards, K Manoj Kumar Reddy

2 1

Freeradius + redis authorize
by Bassem Mettichi 26 Dec '17

26 Dec '17

Hello, iam using actually Freeradius 3.0.15 + redis database for accounting start, stop and interim-update all working fine for me but i need just a module for authentication and authorize, please could somoene give me an idea how to configure module rediswho to authorize access requests? means to execute auth requests + acct requests. is there any special configuration in rediswho file like this for example: authorize_check_query = "lrange radcheck|%{User-Name} 0 1000" authorize_reply_query = "lrange radreply|%{User-Name} 0 1000" Best Regards Mettichi Bassem

2 1

Freeradius 3.0.15 + redis
by Bassem Mettichi 25 Dec '17

25 Dec '17

Hello, i have installed freeradius 3.0.15 + redis database, i would like to do authenfication and accounting with redis database when i add rediswho in authorize section i get this error: /opt/freeradius/v.3.0.15/etc/raddb/sites-enabled/default[417]: "rediswho" modules aren't allowed in 'authorize' sections -- they have no such method. /opt/freeradius/v.3.0.15/etc/raddb/sites-enabled/default[274]: Errors parsing authorize section. any one has an idea about this error and how we can resolve it? Best Regards Mettichi Bassem

2 5

EAP_AKA on FR4 and Got AKA-Permanent-ID tag, but identity is not a permanent ID
by Peter Lambrechtsen 23 Dec '17

23 Dec '17

I'm playing with EAP_AKA and EAP_AKA' to see if I can get it working. Using a test sim card I got from our test lab they can also supplied me the Ki and OPC. I've defined the values in the mods-config/files/authorize. 1530990000000074(a)wlan.mnc005.mcc530.3gppnetwork.org Sim-Ki := 0x.., Sim-Opc := 0x.., Sim-SQN := 1 0530990000000074(a)wlan.mnc005.mcc530.3gppnetwork.org Sim-Ki := 0x.., Sim-Opc := 0x.., Sim-SQN := 1 I can successfully auth with EAP_SIM. (14) Received Access-Request ID 114 (14) User-Name = "1530990000000074(a)wlan.mnc005.mcc530.3gppnetwork.org" (14) Calling-Station-Id = "E0-A3-AC-A0-CC-41" (14) NAS-IP-Address = 192.168.1.240 (14) NAS-Port = 1 (14) Called-Station-Id = "00-22-7F-86-BC-E8:DaLambsTest" (14) Service-Type = Framed-User (14) Framed-MTU = 1400 (14) NAS-Port-Type = Wireless-802.11 (14) NAS-Identifier = "00-22-7F-86-BC-E8" (14) Connect-Info = "CONNECT 802.11g/n" (14) EAP-Message = 0x... (14) Ruckus-SSID = "DaLambsTest" (14) Message-Authenticator = 0xa9f5c23c47c9c2576b4dff7a96511654 (14) Running 'recv Access-Request' from file ./sites-enabled/default (14) Running 'authenticate eap' from file ./sites-enabled/default (14) authenticate eap { (14) eap - Peer sent packet with EAP method Identity (1) (14) eap - Calling submodule eap_md5 (14) eap_md5 - Issuing MD5 Challenge (14) eap - Sending EAP Request (code 1) ID 1 length 22 (14) eap (handled) (14) } # authenticate eap (handled) (15,14) Running 'authenticate eap' from file ./sites-enabled/default (15,14) authenticate eap { (15,14) eap - Peer sent packet with EAP method NAK (3) (15,14) eap - Found mutually acceptable type SIM (18) (15,14) eap - Calling submodule eap_sim (15,14) eap_sim - New EAP-SIM session (15,14) eap_sim - WARNING: Failed parsing identity, continuing anyway: Got SIM-Permanent-ID tag, but identity is not a permanent ID (15,14) eap_sim - Reentering state START (15,14) eap_sim - Sending SIM-State (15,14) eap_sim - Encoding EAP-SIM attributes (15,14) eap_sim - &EAP-SIM-Version-List = 1 (15,14) eap_sim - &EAP-SIM-Any-ID-Req = yes (15,14) eap_sim - &EAP-SIM-Subtype = SIM-Start (15,14) eap - Sending EAP Request (code 1) ID 32 length 20 (15,14) eap (handled) (15,14) } # authenticate eap (handled) (16,14) authenticate eap { (16,14) eap - Peer sent packet with EAP method SIM (18) (16,14) eap - Calling submodule eap_sim (16,14) eap_sim - Decoded EAP-SIM attributes (16,14) eap_sim - &EAP-SIM-Nonce-MT = 0x.... (16,14) eap_sim - &EAP-SIM-Selected-Version = 1 (16,14) eap_sim - &EAP-SIM-Identity = " 1530990000000074(a)wlan.mnc005.mcc530.3gppnetwork.org" (16,14) eap_sim - &EAP-SIM-Subtype = SIM-Start (16,14) eap_sim - WARNING: Failed parsing identity: Got SIM-Permanent-ID tag, but identity is not a permanent ID (16,14) eap_sim - Reentering state START (16,14) eap_sim - Sending SIM-State (16,14) eap_sim - Encoding EAP-SIM attributes (16,14) eap_sim - &EAP-SIM-Version-List = 1 (16,14) eap_sim - &EAP-SIM-Fullauth-ID-Req = yes (16,14) eap_sim - &EAP-SIM-Subtype = SIM-Start (16,14) eap - Sending EAP Request (code 1) ID 33 length 20 (16,14) eap (handled) (16,14) } # authenticate eap (handled) (17,14) authenticate eap { (17,14) eap - Peer sent packet with EAP method SIM (18) (17,14) eap - Calling submodule eap_sim (17,14) eap_sim - Decoded EAP-SIM attributes (17,14) eap_sim - &EAP-SIM-Nonce-MT = 0x... (17,14) eap_sim - &EAP-SIM-Selected-Version = 1 (17,14) eap_sim - &EAP-SIM-Identity = " 1530990000000074(a)wlan.mnc005.mcc530.3gppnetwork.org" (17,14) eap_sim - &EAP-SIM-Subtype = SIM-Start (17,14) eap_sim - WARNING: Failed parsing identity: Got SIM-Permanent-ID tag, but identity is not a permanent ID (17,14) eap_sim - Reentering state START (17,14) eap_sim - Sending SIM-State (17,14) eap_sim - Encoding EAP-SIM attributes (17,14) eap_sim - &EAP-SIM-Version-List = 1 (17,14) eap_sim - &EAP-SIM-Permanent-ID-Req = yes (17,14) eap_sim - &EAP-SIM-Subtype = SIM-Start (17,14) eap - Sending EAP Request (code 1) ID 34 length 20 (17,14) eap (handled) (17,14) } # authenticate eap (handled) (18,14) authenticate eap { (18,14) eap - Peer sent packet with EAP method SIM (18) (18,14) eap - Calling submodule eap_sim (18,14) eap_sim - Decoded EAP-SIM attributes (18,14) eap_sim - &EAP-SIM-Nonce-MT = 0x.. (18,14) eap_sim - &EAP-SIM-Selected-Version = 1 (18,14) eap_sim - &EAP-SIM-Identity = " 1530052190001474(a)wlan.mnc005.mcc530.3gppnetwork.org" (18,14) eap_sim - &EAP-SIM-Subtype = SIM-Start (18,14) eap_sim - WARNING: Failed parsing identity: Got SIM-Permanent-ID tag, but identity is not a permanent ID (18,14) eap_sim - Changed state START -> CHALLENGE (18,14) eap_sim - Acquiring GSM vector(s) (18,14) eap_sim - GSM vector[0] (18,14) eap_sim - KC : 0x.. (18,14) eap_sim - RAND : 0x.. (18,14) eap_sim - SRES : 0x.. (18,14) eap_sim - GSM vector[1] (18,14) eap_sim - KC : 0x.. (18,14) eap_sim - RAND : 0x.. (18,14) eap_sim - SRES : 0x.. (18,14) eap_sim - GSM vector[2] (18,14) eap_sim - KC : 0x.. (18,14) eap_sim - RAND : 0x.. (18,14) eap_sim - SRES : 0x.. (18,14) eap_sim - Sending SIM-Challenge (18,14) eap_sim - Encoding EAP-SIM attributes (18,14) eap_sim - &EAP-SIM-RAND = 0x.. (18,14) eap_sim - &EAP-SIM-RAND = 0x.. (18,14) eap_sim - &EAP-SIM-RAND = 0x.. (18,14) eap_sim - &EAP-SIM-Subtype = SIM-Challenge (18,14) eap_sim - &EAP-SIM-MAC = 0x (18,14) eap - Sending EAP Request (code 1) ID 35 length 80 (18,14) eap (handled) (18,14) } # authenticate eap (handled) (19,14) authenticate eap { (19,14) eap - Peer sent packet with EAP method SIM (18) (19,14) eap - Calling submodule eap_sim (19,14) eap_sim - Decoded EAP-SIM attributes (19,14) eap_sim - &EAP-SIM-MAC = 0x.. (19,14) eap_sim - &EAP-SIM-Subtype = SIM-Challenge (19,14) eap_sim - EAP-SIM-MAC matches calculated MAC (19,14) eap_sim - Changed state CHALLENGE -> SUCCESS (19,14) eap_sim - Sending SIM-Success (19,14) eap_sim - &reply:MS-MPPE-Recv-Key = 0x.. (19,14) eap_sim - &reply:MS-MPPE-Send-Key = 0x.. (19,14) eap - Sending EAP Success (code 3) ID 35 length 4 (19,14) eap - Cleaning up EAP session (19,14) eap (ok) (19,14) } # authenticate eap (ok) And EAP_SIM fails if I have the incorrect Ki/OPC pair on the server side so I know I have the correct values. But if I try and do the same on AKA or AKA' it fails. (7) User-Name = "0530990000000074(a)wlan.mnc005.mcc530.3gppnetwork.org" With AKA the first digit of the IMSI is a 0 rather than 1. (7) Running 'authenticate eap' from file ./sites-enabled/default (7) authenticate eap { (7) eap - Peer sent packet with EAP method Identity (1) (7) eap - Calling submodule eap_md5 (7) eap_md5 - Issuing MD5 Challenge (7) eap - Sending EAP Request (code 1) ID 1 length 22 (7) eap (handled) (7) } # authenticate eap (handled) (8,7) authenticate eap { (8,7) eap - Peer sent packet with EAP method NAK (3) (8,7) eap - Found mutually acceptable type AKA (23) (8,7) eap - Calling submodule eap_aka (8,7) eap_aka - Failed parsing identity, continuing anyway: Got AKA-Permanent-ID tag, but identity is not a permanent ID (8,7) eap_aka - New EAP-AKA session (8,7) eap_aka - WARNING: Identity format unknown, sending Identity request (8,7) eap_aka - Reentering state IDENTITY (8,7) eap_aka - Sending AKA-Identity (Id-Any-Req) (8,7) eap_aka - Encoding EAP-AKA attributes (8,7) eap_aka - &EAP-AKA-Subtype = AKA-Identity (8,7) eap_aka - &EAP-AKA-Any-ID-Req = yes (8,7) eap - Sending EAP Request (code 1) ID 93 length 12 (8,7) eap (handled) (9,7) authenticate eap { (9,7) eap - Peer sent packet with EAP method AKA (23) (9,7) eap - Calling submodule eap_aka (9,7) eap_aka - EAP-AKA decoded attributes (9,7) eap_aka - &EAP-AKA-Identity = " 0530990000000074(a)wlan.mnc005.mcc530.3gppnetwork.org" (9,7) eap_aka - &EAP-AKA-Subtype = AKA-Identity (9,7) eap_aka - WARNING: Failed parsing identity: Got AKA-Permanent-ID tag, but identity is not a permanent ID (9,7) eap_aka - Reentering state IDENTITY (9,7) eap_aka - Sending AKA-Identity (FullAuth-Id-Req) (9,7) eap_aka - Encoding EAP-AKA attributes (9,7) eap_aka - &EAP-AKA-Subtype = AKA-Identity (9,7) eap_aka - &EAP-AKA-Fullauth-ID-Req = yes (9,7) eap - Sending EAP Request (code 1) ID 94 length 12 (9,7) eap (handled) (9,7) } # authenticate eap (handled) (10,7) authenticate eap { (10,7) eap - Peer sent packet with EAP method AKA (23) (10,7) eap - Calling submodule eap_aka (10,7) eap_aka - EAP-AKA decoded attributes (10,7) eap_aka - &EAP-AKA-Identity = " 0530990000000074(a)wlan.mnc005.mcc530.3gppnetwork.org" (10,7) eap_aka - &EAP-AKA-Subtype = AKA-Identity (10,7) eap_aka - WARNING: Failed parsing identity: Got AKA-Permanent-ID tag, but identity is not a permanent ID (10,7) eap_aka - Reentering state IDENTITY (10,7) eap_aka - Sending AKA-Identity (Permanent-Id-Req) (10,7) eap_aka - Encoding EAP-AKA attributes (10,7) eap_aka - &EAP-AKA-Subtype = AKA-Identity (10,7) eap_aka - &EAP-AKA-Permanent-ID-Req = yes (10,7) eap - Sending EAP Request (code 1) ID 95 length 12 (10,7) eap (handled) (10,7) } # authenticate eap (handled) (11,7) authenticate eap { (11,7) eap - Peer sent packet with EAP method AKA (23) (11,7) eap - Calling submodule eap_aka (11,7) eap_aka - EAP-AKA decoded attributes (11,7) eap_aka - &EAP-AKA-Identity = " 0530990000000074(a)wlan.mnc005.mcc530.3gppnetwork.org" (11,7) eap_aka - &EAP-AKA-Subtype = AKA-Identity (11,7) eap_aka - WARNING: Failed parsing identity: Got AKA-Permanent-ID tag, but identity is not a permanent ID (11,7) eap_aka - Changed state IDENTITY -> CHALLENGE (11,7) eap_aka - Acquiring UMTS vector(s) (11,7) eap_aka - UMTS vector (11,7) eap_aka - AUTN : 0x.. (11,7) eap_aka - CK : 0x.. (11,7) eap_aka - IK : 0x.. (11,7) eap_aka - RAND : 0x.. (11,7) eap_aka - XRES : 0x.. (11,7) eap_aka - Sending AKA-Challenge (11,7) eap_aka - Encoding EAP-AKA attributes (11,7) eap_aka - &EAP-AKA-Subtype = AKA-Challenge (11,7) eap_aka - &EAP-AKA-Bidding = Prefer-AKA-Prime (11,7) eap_aka - &EAP-AKA-RAND = 0x.. (11,7) eap_aka - &EAP-AKA-AUTN = 0x.. (11,7) eap_aka - &EAP-AKA-MAC = 0x (11,7) eap_aka - &EAP-AKA-Checkcode = 0x.. (11,7) eap - Sending EAP Request (code 1) ID 96 length 96 (11,7) eap (handled) (11,7) } # authenticate eap (handled) (12,7) authenticate eap { (12,7) eap - Peer sent packet with EAP method AKA (23) (12,7) eap - Calling submodule eap_aka (12,7) eap_aka - EAP-AKA decoded attributes (12,7) eap_aka - &EAP-AKA-AUTS = 0x.. (12,7) eap_aka - &EAP-AKA-Subtype = AKA-Synchronization-Failure (12,7) eap_aka - ERROR: EAP-AKA Peer synchronization failure (12,7) eap_aka - Changed state CHALLENGE -> FAILURE-NOTIFICATION (12,7) eap_aka - Sending AKA-Notification (General-Failure) (12,7) eap_aka - Encoding EAP-AKA attributes (12,7) eap_aka - &EAP-SIM-Notification = General-Failure (12,7) eap_aka - &EAP-AKA-Subtype = AKA-Notification (12,7) eap - Sending EAP Request (code 1) ID 97 length 12 (12,7) eap (handled) (12,7) } # authenticate eap (handled) (13,7) authenticate eap { (13,7) eap - Peer sent packet with EAP method AKA (23) (13,7) eap - Calling submodule eap_aka (13,7) eap_aka - EAP-AKA decoded attributes (13,7) eap_aka - &EAP-AKA-Subtype = AKA-Notification (13,7) eap_aka - AKA-Notification ACKed, sending EAP-Failure (13,7) eap_aka - Changed state FAILURE-NOTIFICATION -> FAILURE (13,7) eap_aka - Sending EAP-Failure (13,7) eap - ERROR: Failed in EAP AKA (23) session. EAP sub-module failed (13,7) eap - Sending EAP Failure (code 4) ID 97 length 4 (13,7) eap - Cleaning up EAP session (13,7) eap (reject) (13,7) } # authenticate eap (reject) Do I need to have the sequence as a proper counter for AKA rather than just a static value? Or what else am I doing wrong?

1 0