- Freeradius-Users - lists.freeradius.org

AW: AW: AW: After Upgrade from freeradius 2 to 3 (Debian 8 - 9): TLS Alert write:fatal:unsupported certificate
by Gladewitz, Robert 19 Dec '17

19 Dec '17

Hello Boris, so a create a pcap and also an log. I hope, you will found some think :-( Robert -----Ursprüngliche Nachricht----- Von: Boris Lytochkin [mailto:lytboris@yandex-team.ru] Gesendet: Sonntag, 17. Dezember 2017 20:44 An: Gladewitz, Robert <Robert.Gladewitz(a)dbfz.de> Betreff: Re: AW: AW: After Upgrade from freeradius 2 to 3 (Debian 8 - 9): TLS Alert write:fatal:unsupported certificate Hi. Should be. On 17.12.2017 22:30, Gladewitz, Robert wrote: > Hello Boris, > > are the dumps from radius service interface also ok?? > > Regards > Robert > > -----Ursprüngliche Nachricht----- > Von: Boris Lytochkin [mailto:lytboris@yandex-team.ru] > Gesendet: Sonntag, 17. Dezember 2017 16:44 > An: Gladewitz, Robert <Robert.Gladewitz(a)dbfz.de>; FreeRadius users > mailing list <freeradius-users(a)lists.freeradius.org> > Betreff: Re: AW: After Upgrade from freeradius 2 to 3 (Debian 8 - 9): > TLS Alert write:fatal:unsupported certificate > > Hi. > > Can you take a SPAN capture on phone port and attach it into this thread so whole EAP-TLS session can be read (ether-type 0x888e for tcpdump filter will do)? This capture will help a lot to give you a hint how to proceed with this issue. > > On 17.12.2017 12:44, Gladewitz, Robert via Freeradius-Users wrote: >> Hallo Alan, >> >> thank you for your answere. The problem only happening on Cisco CAPF Certificates, which will be created by cisco callmanager self for all ip phones. All other authentification (Windows client, WPA etc.) in our enviroment working fine. >> >> But on cisco call manager/CUCM, there is no option that can change the certificate attributes. >> >> Also interess is, that the openssl verify is working fine! >> >> Ist there may a possebility to skip the internal certificate check and use only an external cammand (like verify -> client)? For me it will be ok without any certificate check also. But i need eap-tls for set the voice vlan. >> >> Regards >> >> Robert >> >> >> >> -----Ursprüngliche Nachricht----- >> Von: Alan DeKok [mailto:aland@deployingradius.com] >> Gesendet: Samstag, 16. Dezember 2017 20:37 >> An: Gladewitz, Robert <Robert.Gladewitz(a)dbfz.de>; FreeRadius users >> mailing list <freeradius-users(a)lists.freeradius.org> >> Betreff: Re: After Upgrade from freeradius 2 to 3 (Debian 8 - 9): TLS >> Alert write:fatal:unsupported certificate >> >> On Dec 15, 2017, at 1:28 PM, Gladewitz, Robert via Freeradius-Users <freeradius-users(a)lists.freeradius.org> wrote: >>> after update to version 3 we get the followong error on module eap-tls: >> It's not just FreeRADIUS that's been updated. But also OpenSSL. Which implements the TLS portion of EAP-TLS. >> >>> (59) eap_tls: ERROR: SSL says error 26 : unsupported certificate purpose >> The certificates don't have the extended key usage OIDs. Windows needs them. >> >> The certs created by the scripts included with FreeRADIUS work. >> >>> In do not understand, why i get this error. If i use manually >>> openssl verify all seems ok. >> OpenSSL doesn't verify the extended key usage fields. >> >>> In some discusion i find out, that some think is wron with the >>> extendet attributes. But in this case, why it is working fine in >>> freeradius 2 and 1 implemtations. >> No idea. >> >> But you didn't create the certificates correctly. >> >> You'll need to regenerate the certs with the correct information. Use the scripts in the raddb/certs/ directory. >> >> Alan DeKok. >> >> >> - >> List info/subscribe/unsubscribe? See >> http://www.freeradius.org/list/users.html > -- > Boris Lytochkin > Yandex NOC > +7 (495) 739 70 00 ext. 7671 > -- Boris Lytochkin Yandex NOC +7 (495) 739 70 00 ext. 7671

1 0

error when adding Primary-DNS
by J E H A N Z A I B 19 Dec '17

19 Dec '17

Hi team, I am getting below error when I add in my radgroupreply . I am using other parameter like Framed-Pool and its working fine. Anyidea what it could be ? | 5 | testgroup | Primary-DNS | := | xx.xx.xx.xx | (80) sql: Executing select query: SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname ='testgroup' ORDER BY id (80) sql: ERROR: Failed to create the pair: Unknown name "Primary-DNS" (80) sql: ERROR: Error parsing user data from database result (80) sql: ERROR: Error retrieving reply pairs for group testgroup Regards, J

4 7

Multiple authorize methods with python module
by Gary Gwin 18 Dec '17

18 Dec '17

I need two distinct python module authorize methods. One for client authentication with the dynamic_clients virtual server and the other for user authorization in the default virtual server. I can detect state in a single python authorize method using various RADIUS request variables, but that seems fragile. What I'd really like is a way to use a different python authorize method for each the of the dynamci_clients and default virtual servers. Have had no luck configuring and referencing unique instance names as suggested in radiusd.conf: # python mypython1 { # config_item = value # ... # } # python mypython2 { # config_item = value # ... # } I've tried various other configuration options. Is this possible? If yes, what needs to be done? Thanks, Gary

3 4

(no subject)
by Yoyo Chen 18 Dec '17

18 Dec '17

Hi all, I am trying to figure out what CoA can do and how to configure it. I read the documents in official site, and try to google any resources which can help me. Bad luck. ** Environemnt ** 1. I have installed FreeRADIUS 2.1.12 on Ubuntu 14.04, IP: 192.168.10.6 2. A NAS(L2 switch), IP: 192.168.10.7 3. A PC without Wireshark, IP: 192.168.10.8 4. All of them connected by a hub ** Status ** 1. I add client 192.168.10.0/24 { secret = 123456 } in clients.conf, and add yoyo Cleartext-Password := 111111 cisco-avpair = "shell:priv-lvl=10" in the users After complete the configuration in NAS, the NAS can get Access-Accept with AVP correctly. 2. I am stuck on how to move forward on CoA ** Questions need help ** Q1. Is there any article or book can help me to configure about CoA? Q2. Will FreeRADIUS send CoA-Request out when someone modify the priv-lvl in users? Or what is a good way for me to test and understand the behavior of CoA? Thanks for any help and suggestions! Sincerely, 陳明正 Yoyo Chen https://yoyochen.blogspot.tw

2 1

After Upgrade from freeradius 2 to 3 (Debian 8 - 9): TLS Alert write:fatal:unsupported certificate
by Gladewitz, Robert 17 Dec '17

17 Dec '17

Hello, after update to version 3 we get the followong error on module eap-tls: <SNIP> (59) eap_tls: Continuing EAP-TLS (59) eap_tls: Peer indicated complete TLS record size will be 1321 bytes (59) eap_tls: Got complete TLS record (1321 bytes) (59) eap_tls: [eaptls verify] = length included (59) eap_tls: TLS_accept: SSLv3/TLS write server done (59) eap_tls: <<< recv TLS 1.0 Handshake [length 0353], Certificate (59) eap_tls: Creating attributes from certificate OIDs (59) eap_tls: TLS-Cert-Serial := "5871a15a20dc203cceb13b568ad905f9" (59) eap_tls: TLS-Cert-Expiration := "220309050842Z" (59) eap_tls: TLS-Cert-Subject := "/C=DE/O=Deutsches BiomasseForschungsZentrum gemeinnuetzige GmbH/OU=IT/CN=CAPF-1b0db5b4/ST=Sachsen/L=Leipzig" (59) eap_tls: TLS-Cert-Issuer := "/C=DE/O=Deutsches BiomasseForschungsZentrum gemeinnuetzige GmbH/OU=IT/CN=CAPF-1b0db5b4/ST=Sachsen/L=Leipzig" (59) eap_tls: TLS-Cert-Common-Name := "CAPF-1b0db5b4" (59) eap_tls: ERROR: SSL says error 26 : unsupported certificate purpose (59) eap_tls: >>> send TLS 1.0 Alert [length 0002], fatal unsupported_certificate (59) eap_tls: ERROR: TLS Alert write:fatal:unsupported certificate tls: TLS_accept: Error in error (59) eap_tls: ERROR: Failed in __FUNCTION__ (SSL_read): error:1417C086:SSL routines:tls_process_client_certificate:certificate verify failed (59) eap_tls: ERROR: System call (I/O) error (-1) (59) eap_tls: ERROR: TLS receive handshake failed during operation (59) eap_tls: ERROR: [eaptls process] = fail </SNIP> In do not understand, why i get this error. If i use manually openssl verify all seems ok. Also, freeraduus do not use the comment define in tls -> verify -> client. My relatet tls config <SNIP> tls-config tls-common { require_client_cert = no certdir = ${confdir}/certs.8021x cadir = ${confdir}/certs.ciscophone private_key_password = myspecpass private_key_file = ${certdir}/cert-srv-dbfz-radius01.pem certificate_file = ${certdir}/cert-srv-dbfz-radius01.pem ca_file = ${cadir}/CAPF.pem dh_file = ${certdir}/dh random_file = /dev/urandom check_crl = no check_all_crl = no ca_path = ${cadir} check_cert_issuer = "/C=DE/O=Deutsches BiomasseForschungsZentrum gemeinnuetzige GmbH/OU=IT/CN=CAPF-1b0db5b4/ST=Sachsen/L=Leipzig" cipher_list = "DEFAULT" ecdh_curve = "prime256v1" make_cert_command = "${certdir}/bootstrap" cache { enable = no lifetime = 24 # hours max_entries = 255 #name = "EAP module" #persist_dir = "${logdir}/tlscache" } verify { skip_if_ocsp_ok = no tmpdir = /var/lib/freeradius/temp client = "/usr/bin/openssl verify -CAfile ${confdir}/certs.8021x/CAPF.pem %{TLS-Client-Cert-Filename}" # client = "/usr/local/bin/checkcert.sh verify -CApath ${..ca_path} %{TLS-Client-Cert-Filename}" } tls { require_client_cert = no tls = tls-common # virtual_server = check-eap-tls } </SNIP> In some discusion i find out, that some think is wron with the extendet attributes. But in this case, why it is working fine in freeradius 2 and 1 implemtations. Regards Robert

3 4

EAP-TLV
by Vieri 16 Dec '17

16 Dec '17

Hi, I'm trying to connect from a Windows 7 client with PEAP and TLV checking enabled. This is the full log: FreeRADIUS Version 3.0.14 Copyright (C) 1999-2017 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/raddb/dictionary including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/mods-enabled/ including configuration file /etc/raddb/mods-enabled/linelog including configuration file /etc/raddb/mods-enabled/digest including configuration file /etc/raddb/mods-enabled/attr_filter including configuration file /etc/raddb/mods-enabled/realm including configuration file /etc/raddb/mods-enabled/detail.log including configuration file /etc/raddb/mods-enabled/preprocess including configuration file /etc/raddb/mods-enabled/chap including configuration file /etc/raddb/mods-enabled/unix including configuration file /etc/raddb/mods-enabled/ntlm_auth including configuration file /etc/raddb/mods-enabled/dynamic_clients including configuration file /etc/raddb/mods-enabled/echo including configuration file /etc/raddb/mods-enabled/eap including configuration file /etc/raddb/mods-enabled/soh including configuration file /etc/raddb/mods-enabled/detail including configuration file /etc/raddb/mods-enabled/sql including configuration file /etc/raddb/mods-enabled/replicate including configuration file /etc/raddb/mods-enabled/cache_eap including configuration file /etc/raddb/mods-enabled/expiration including configuration file /etc/raddb/mods-enabled/logintime including configuration file /etc/raddb/mods-enabled/radutmp including configuration file /etc/raddb/mods-enabled/passwd including configuration file /etc/raddb/mods-enabled/pap including configuration file /etc/raddb/mods-enabled/unpack including configuration file /etc/raddb/mods-enabled/date including configuration file /etc/raddb/mods-enabled/sradutmp including configuration file /etc/raddb/mods-enabled/mschap including configuration file /etc/raddb/mods-enabled/exec including configuration file /etc/raddb/mods-enabled/always including configuration file /etc/raddb/mods-enabled/dhcp including configuration file /etc/raddb/mods-enabled/utf8 including configuration file /etc/raddb/mods-enabled/files including configuration file /etc/raddb/mods-enabled/expr including files in directory /etc/raddb/policy.d/ including configuration file /etc/raddb/policy.d/filter including configuration file /etc/raddb/policy.d/operator-name including configuration file /etc/raddb/policy.d/eap including configuration file /etc/raddb/policy.d/accounting including configuration file /etc/raddb/policy.d/debug including configuration file /etc/raddb/policy.d/control including configuration file /etc/raddb/policy.d/abfab-tr including configuration file /etc/raddb/policy.d/moonshot-targeted-ids including configuration file /etc/raddb/policy.d/canonicalization including configuration file /etc/raddb/policy.d/dhcp including configuration file /etc/raddb/policy.d/cui including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/inner-tunnel main { security { user = "radius" group = "radius" allow_core_dumps = no } name = "radiusd" prefix = "/usr" localstatedir = "/var/lib" logdir = "/var/log/radius" run_dir = "/run/radiusd" } main { name = "radiusd" prefix = "/usr" localstatedir = "/var/lib" sbindir = "/usr/sbin" logdir = "/var/log/radius" run_dir = "/run/radiusd" libdir = "/usr/lib64" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes allow_vulnerable_openssl = "no" } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.215.147.65 { ipv4addr = 10.215.147.65 require_message_authenticator = no secret = <<< secret >>> shortname = "D1300" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.215.145.219 { ipv4addr = 10.215.145.219 require_message_authenticator = no secret = <<< secret >>> shortname = "D1533" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.215.144.7 { ipv4addr = 10.215.144.7 require_message_authenticator = no secret = <<< secret >>> shortname = "bl07" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.215.144.92 { ipv4addr = 10.215.144.92 require_message_authenticator = no secret = <<< secret >>> shortname = "testsys" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.215.147.140 { ipaddr = 10.215.147.140 require_message_authenticator = no secret = <<< secret >>> shortname = "D894" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Auth-Type = mschap radiusd: #### Instantiating modules #### modules { # Loaded module rlm_linelog # Loading module "linelog" from file /etc/raddb/mods-enabled/linelog linelog { filename = "/var/log/radius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/var/log/radius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_digest # Loading module "digest" from file /etc/raddb/mods-enabled/digest # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_detail # Loading module "auth_log" from file /etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups" hints = "/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_chap # Loading module "chap" from file /etc/raddb/mods-enabled/chap # Loaded module rlm_unix # Loading module "unix" from file /etc/raddb/mods-enabled/unix unix { radwtmp = "/var/log/radius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_exec # Loading module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients # Loading module "echo" from file /etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_eap # Loading module "eap" from file /etc/raddb/mods-enabled/eap eap { default_eap_type = "peap" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_soh # Loading module "soh" from file /etc/raddb/mods-enabled/soh soh { dhcp = yes } # Loading module "detail" from file /etc/raddb/mods-enabled/detail detail { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_sql # Loading module "sql" from file /etc/raddb/mods-enabled/sql sql { driver = "rlm_sql_unixodbc" server = "sqlserver" port = 0 login = "sqluser" password = <<< secret >>> radius_db = "HMANdb" read_groups = yes read_profiles = yes read_clients = no delete_stale_sessions = yes sql_user_name = "" default_user_profile = "" client_query = "SELECT id,nasname,shortname,type,secret FROM nas" safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" accounting { reference = ".query" type { accounting-on { } accounting-off { } start { } interim-update { } stop { } } } post-auth { reference = ".query" } } rlm_sql (sql): Driver rlm_sql_unixodbc (module rlm_sql_unixodbc) loaded and linked # Loaded module rlm_replicate # Loading module "replicate" from file /etc/raddb/mods-enabled/replicate # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/raddb/mods-enabled/expiration # Loaded module rlm_logintime # Loading module "logintime" from file /etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_pap # Loading module "pap" from file /etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/raddb/mods-enabled/unpack # Loaded module rlm_date # Loading module "date" from file /etc/raddb/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" utc = no } # Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = yes require_strong = yes with_ntdomain_hack = yes ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --username=%{%{Stripped-User-Name}:-%{%{User-Name}:-None}} --challenge=%{%{mschap:Challenge}:-00} --nt-response=%{%{mschap:NT-Response}:-00} --require-membership-of=DOMAIN\\Domain\ Users --domain=%{%{Stripped-User-Domain}:-00}" ntlm_auth_timeout = 3 passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loading module "exec" from file /etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_always # Loading module "reject" from file /etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_dhcp # Loading module "dhcp" from file /etc/raddb/mods-enabled/dhcp # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/raddb/mods-enabled/utf8 # Loaded module rlm_files # Loading module "files" from file /etc/raddb/mods-enabled/files files { filename = "/etc/raddb/mods-config/files/authorize" usersfile = "/etc/raddb/mods-config/files/authorize" acctusersfile = "/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy" } # Loading module "authorized_macs" from file /etc/raddb/mods-enabled/files files authorized_macs { usersfile = "/SAMBA/radius/authorized_macs" key = "%{Calling-Station-ID}" } # Loading module "authorized_hosts" from file /etc/raddb/mods-enabled/files files authorized_hosts { usersfile = "/SAMBA/radius/authorized_hosts" key = "%{1}" } # Loaded module rlm_expr # Loading module "expr" from file /etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } instantiate { # Instantiating module "sql" from file /etc/raddb/mods-enabled/sql rlm_sql (sql): Attempting to connect to database "HMANdb" rlm_sql (sql): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_sql (sql): Opening additional connection (0), 1 of 32 pending slots used rlm_sql (sql): Opening additional connection (1), 1 of 31 pending slots used rlm_sql (sql): Opening additional connection (2), 1 of 30 pending slots used rlm_sql (sql): Opening additional connection (3), 1 of 29 pending slots used rlm_sql (sql): Opening additional connection (4), 1 of 28 pending slots used } # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog # Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject [/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "preprocess" from file /etc/raddb/mods-enabled/preprocess reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /etc/raddb/mods-config/preprocess/hints # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/raddb/certs" pem_file_type = yes private_key_file = "/etc/raddb/certs/server.pem" certificate_file = "/etc/raddb/certs/server.pem" ca_file = "/etc/raddb/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/raddb/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail # Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "expiration" from file /etc/raddb/mods-enabled/expiration # Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime # Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap rlm_mschap (mschap): authenticating by calling 'ntlm_auth' # Instantiating module "reject" from file /etc/raddb/mods-enabled/always # Instantiating module "fail" from file /etc/raddb/mods-enabled/always # Instantiating module "ok" from file /etc/raddb/mods-enabled/always # Instantiating module "handled" from file /etc/raddb/mods-enabled/always # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always # Instantiating module "noop" from file /etc/raddb/mods-enabled/always # Instantiating module "updated" from file /etc/raddb/mods-enabled/always # Instantiating module "files" from file /etc/raddb/mods-enabled/files reading pairlist file /etc/raddb/mods-config/files/authorize reading pairlist file /etc/raddb/mods-config/files/authorize reading pairlist file /etc/raddb/mods-config/files/accounting reading pairlist file /etc/raddb/mods-config/files/pre-proxy # Instantiating module "authorized_macs" from file /etc/raddb/mods-enabled/files reading pairlist file /SAMBA/radius/authorized_macs # Instantiating module "authorized_hosts" from file /etc/raddb/mods-enabled/files reading pairlist file /SAMBA/radius/authorized_hosts } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/raddb/radiusd.conf } # server server default { # from file /etc/raddb/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/raddb/sites-enabled/inner-tunnel:336 } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on proxy address * port 42089 Listening on proxy address :: port 50831 Ready to process requests (0) Received Access-Request Id 0 from 10.215.147.140:49154 to 10.215.144.91:1812 length 98 (0) NAS-IP-Address = 10.215.147.140 (0) NAS-Port-Type = Ethernet (0) NAS-Port = 43 (0) User-Name = "DOMAIN\\" (0) Calling-Station-Id = "DC-4A-3E-06-11-46" (0) EAP-Message = 0x0201000c01444f4d41494e5c (0) Message-Authenticator = 0x1c097508abeab4ad4975707327c9a93a (0) # Executing section authorize from file /etc/raddb/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) policy custom_filter_default { (0) policy rewrite_calling_station_id { (0) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (0) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) -> TRUE (0) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (0) update request { (0) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (0) --> DC-4A-3E-06-11-46 (0) &Calling-Station-Id := DC-4A-3E-06-11-46 (0) } # update request = noop (0) [updated] = updated (0) } # if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) = updated (0) ... skipping else: Preceding "if" was taken (0) } # policy rewrite_calling_station_id = updated (0) if ( ("%{sql:SELECT count(inf_pcs.Mac) FROM inf_pcs INNER JOIN inf_devices ON inf_pcs.DevName = inf_devices.E_Name WHERE ( inf_devices.Unused = 0 AND inf_devices.Removed = 0 AND ( inf_pcs.Mac = '%{Calling-Station-ID}' OR inf_pcs.Mac = '%{Calling-Station-ID};' OR inf_pcs.Mac LIKE '%%;%{Calling-Station-ID}%%' ) )}" <= 0) && ("%{sql:SELECT count(Mac) FROM inf_devices WHERE ( Unused = 0 AND Removed = 0 AND ( Mac = '%{Calling-Station-ID}' OR Mac = '%{Calling-Station-ID};' OR Mac LIKE '%%;%{Calling-Station-ID}%%' ) )}" <= 0) ) || (!EAP-Message) { rlm_sql (sql): Reserved connection (0) (0) Executing select query: SELECT count(inf_pcs.Mac) FROM inf_pcs INNER JOIN inf_devices ON inf_pcs.DevName = inf_devices.E_Name WHERE ( inf_devices.Unused = 0 AND inf_devices.Removed = 0 AND ( inf_pcs.Mac = 'DC-4A-3E-06-11-46' OR inf_pcs.Mac = 'DC-4A-3E-06-11-46;' OR inf_pcs.Mac LIKE '%;DC-4A-3E-06-11-46%' ) ) rlm_sql (sql): Released connection (0) Need 5 more connections to reach 10 spares rlm_sql (sql): Opening additional connection (5), 1 of 27 pending slots used (0) EXPAND %{sql:SELECT count(inf_pcs.Mac) FROM inf_pcs INNER JOIN inf_devices ON inf_pcs.DevName = inf_devices.E_Name WHERE ( inf_devices.Unused = 0 AND inf_devices.Removed = 0 AND ( inf_pcs.Mac = '%{Calling-Station-ID}' OR inf_pcs.Mac = '%{Calling-Station-ID};' OR inf_pcs.Mac LIKE '%%;%{Calling-Station-ID}%%' ) )} (0) --> 1 (0) if ( ("%{sql:SELECT count(inf_pcs.Mac) FROM inf_pcs INNER JOIN inf_devices ON inf_pcs.DevName = inf_devices.E_Name WHERE ( inf_devices.Unused = 0 AND inf_devices.Removed = 0 AND ( inf_pcs.Mac = '%{Calling-Station-ID}' OR inf_pcs.Mac = '%{Calling-Station-ID};' OR inf_pcs.Mac LIKE '%%;%{Calling-Station-ID}%%' ) )}" <= 0) && ("%{sql:SELECT count(Mac) FROM inf_devices WHERE ( Unused = 0 AND Removed = 0 AND ( Mac = '%{Calling-Station-ID}' OR Mac = '%{Calling-Station-ID};' OR Mac LIKE '%%;%{Calling-Station-ID}%%' ) )}" <= 0) ) || (!EAP-Message) -> FALSE (0) else { (0) if ( (User-Name) && (&User-Name =~ /^host\/(\w+)(\.\w+)*$/) ) { (0) if ( (User-Name) && (&User-Name =~ /^host\/(\w+)(\.\w+)*$/) ) -> FALSE (0) else { (0) eap: Peer sent EAP Response (code 2) ID 1 length 12 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # else = ok (0) } # else = ok (0) } # policy custom_filter_default = updated (0) [chap] = noop (0) [mschap] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "DOMAIN\", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) ntdomain: Checking for prefix before "\" (0) ntdomain: Looking up realm "DOMAIN" for User-Name = "DOMAIN\" (0) ntdomain: No such realm "DOMAIN" (0) [ntdomain] = noop (0) eap: Peer sent EAP Response (code 2) ID 1 length 12 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) Found Auth-Type = eap (0) ERROR: Warning: Found 2 auth-types on request for user 'DOMAIN\' (0) # Executing group from file /etc/raddb/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_peap to process data (0) eap_peap: Initiating new EAP-TLS session (0) eap_peap: [eaptls start] = request (0) eap: Sending EAP Request (code 1) ID 2 length 6 (0) eap: EAP session adding &reply:State = 0x34bf2a3234bd33c7 (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) # Executing group from file /etc/raddb/sites-enabled/default (0) Challenge { ... } # empty sub-section is ignored (0) Sent Access-Challenge Id 0 from 10.215.144.91:1812 to 10.215.147.140:49154 length 0 (0) EAP-Message = 0x010200061920 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0x34bf2a3234bd33c79ddc0c2553452e2c (0) Finished request Waking up in 4.9 seconds. (0) Cleaning up request packet ID 0 with timestamp +13 (1) Received Access-Request Id 0 from 10.215.147.140:49154 to 10.215.144.91:1812 length 213 (1) NAS-IP-Address = 10.215.147.140 (1) NAS-Port-Type = Ethernet (1) NAS-Port = 43 (1) User-Name = "DOMAIN\\" (1) State = 0x34bf2a3234bd33c79ddc0c2553452e2c (1) Calling-Station-Id = "DC-4A-3E-06-11-46" (1) EAP-Message = 0x0202006d198000000063160301005e0100005a03015a3120ebb4e29460307281ca82738da1b85831224c576838030c39101a1f498f000018c014c0130035002fc00ac00900380032000a00130005000401000019000a0006000400170018000b0002010000170000ff01000100 (1) Message-Authenticator = 0xe999fa51f37ec5cde5aa3d0d4a62c197 (1) session-state: No cached attributes (1) # Executing section authorize from file /etc/raddb/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /(a)\./) { (1) if (&User-Name =~ /(a)\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) policy custom_filter_default { (1) policy rewrite_calling_station_id { (1) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (1) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) -> TRUE (1) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (1) update request { (1) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (1) --> DC-4A-3E-06-11-46 (1) &Calling-Station-Id := DC-4A-3E-06-11-46 (1) } # update request = noop (1) [updated] = updated (1) } # if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) = updated (1) ... skipping else: Preceding "if" was taken (1) } # policy rewrite_calling_station_id = updated (1) if ( ("%{sql:SELECT count(inf_pcs.Mac) FROM inf_pcs INNER JOIN inf_devices ON inf_pcs.DevName = inf_devices.E_Name WHERE ( inf_devices.Unused = 0 AND inf_devices.Removed = 0 AND ( inf_pcs.Mac = '%{Calling-Station-ID}' OR inf_pcs.Mac = '%{Calling-Station-ID};' OR inf_pcs.Mac LIKE '%%;%{Calling-Station-ID}%%' ) )}" <= 0) && ("%{sql:SELECT count(Mac) FROM inf_devices WHERE ( Unused = 0 AND Removed = 0 AND ( Mac = '%{Calling-Station-ID}' OR Mac = '%{Calling-Station-ID};' OR Mac LIKE '%%;%{Calling-Station-ID}%%' ) )}" <= 0) ) || (!EAP-Message) { rlm_sql (sql): Reserved connection (1) (1) Executing select query: SELECT count(inf_pcs.Mac) FROM inf_pcs INNER JOIN inf_devices ON inf_pcs.DevName = inf_devices.E_Name WHERE ( inf_devices.Unused = 0 AND inf_devices.Removed = 0 AND ( inf_pcs.Mac = 'DC-4A-3E-06-11-46' OR inf_pcs.Mac = 'DC-4A-3E-06-11-46;' OR inf_pcs.Mac LIKE '%;DC-4A-3E-06-11-46%' ) ) rlm_sql (sql): Released connection (1) (1) EXPAND %{sql:SELECT count(inf_pcs.Mac) FROM inf_pcs INNER JOIN inf_devices ON inf_pcs.DevName = inf_devices.E_Name WHERE ( inf_devices.Unused = 0 AND inf_devices.Removed = 0 AND ( inf_pcs.Mac = '%{Calling-Station-ID}' OR inf_pcs.Mac = '%{Calling-Station-ID};' OR inf_pcs.Mac LIKE '%%;%{Calling-Station-ID}%%' ) )} (1) --> 1 (1) if ( ("%{sql:SELECT count(inf_pcs.Mac) FROM inf_pcs INNER JOIN inf_devices ON inf_pcs.DevName = inf_devices.E_Name WHERE ( inf_devices.Unused = 0 AND inf_devices.Removed = 0 AND ( inf_pcs.Mac = '%{Calling-Station-ID}' OR inf_pcs.Mac = '%{Calling-Station-ID};' OR inf_pcs.Mac LIKE '%%;%{Calling-Station-ID}%%' ) )}" <= 0) && ("%{sql:SELECT count(Mac) FROM inf_devices WHERE ( Unused = 0 AND Removed = 0 AND ( Mac = '%{Calling-Station-ID}' OR Mac = '%{Calling-Station-ID};' OR Mac LIKE '%%;%{Calling-Station-ID}%%' ) )}" <= 0) ) || (!EAP-Message) -> FALSE (1) else { (1) if ( (User-Name) && (&User-Name =~ /^host\/(\w+)(\.\w+)*$/) ) { (1) if ( (User-Name) && (&User-Name =~ /^host\/(\w+)(\.\w+)*$/) ) -> FALSE (1) else { (1) eap: Peer sent EAP Response (code 2) ID 2 length 109 (1) eap: Continuing tunnel setup (1) [eap] = ok (1) } # else = ok (1) } # else = ok (1) } # policy custom_filter_default = updated (1) [chap] = noop (1) [mschap] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "DOMAIN\", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) ntdomain: Checking for prefix before "\" (1) ntdomain: Looking up realm "DOMAIN" for User-Name = "DOMAIN\" (1) ntdomain: No such realm "DOMAIN" (1) [ntdomain] = noop (1) eap: Peer sent EAP Response (code 2) ID 2 length 109 (1) eap: Continuing tunnel setup (1) [eap] = ok (1) } # authorize = ok (1) Found Auth-Type = eap (1) Found Auth-Type = eap (1) ERROR: Warning: Found 2 auth-types on request for user 'DOMAIN\' (1) # Executing group from file /etc/raddb/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0x34bf2a3234bd33c7 (1) eap: Finished EAP session with state 0x34bf2a3234bd33c7 (1) eap: Previous EAP request found for state 0x34bf2a3234bd33c7, released from the list (1) eap: Peer sent packet with method EAP PEAP (25) (1) eap: Calling submodule eap_peap to process data (1) eap_peap: Continuing EAP-TLS (1) eap_peap: Peer indicated complete TLS record size will be 99 bytes (1) eap_peap: Got complete TLS record (99 bytes) (1) eap_peap: [eaptls verify] = length included (1) eap_peap: (other): before/accept initialization (1) eap_peap: TLS_accept: before/accept initialization (1) eap_peap: <<< recv TLS 1.0 Handshake [length 005e], ClientHello (1) eap_peap: TLS_accept: SSLv3 read client hello A (1) eap_peap: >>> send TLS 1.0 Handshake [length 0039], ServerHello (1) eap_peap: TLS_accept: SSLv3 write server hello A (1) eap_peap: >>> send TLS 1.0 Handshake [length 079e], Certificate (1) eap_peap: TLS_accept: SSLv3 write certificate A (1) eap_peap: >>> send TLS 1.0 Handshake [length 014b], ServerKeyExchange (1) eap_peap: TLS_accept: SSLv3 write key exchange A (1) eap_peap: >>> send TLS 1.0 Handshake [length 0004], ServerHelloDone (1) eap_peap: TLS_accept: SSLv3 write server done A (1) eap_peap: TLS_accept: SSLv3 flush data (1) eap_peap: TLS_accept: SSLv3 read client certificate A (1) eap_peap: TLS_accept: Need to read more data: SSLv3 read client key exchange A (1) eap_peap: TLS_accept: Need to read more data: SSLv3 read client key exchange A (1) eap_peap: In SSL Handshake Phase (1) eap_peap: In SSL Accept mode (1) eap_peap: [eaptls process] = handled (1) eap: Sending EAP Request (code 1) ID 3 length 1004 (1) eap: EAP session adding &reply:State = 0x34bf2a3235bc33c7 (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) # Executing group from file /etc/raddb/sites-enabled/default (1) Challenge { ... } # empty sub-section is ignored (1) Sent Access-Challenge Id 0 from 10.215.144.91:1812 to 10.215.147.140:49154 length 0 (1) EAP-Message = 0x010303ec19c00000093a160301003902000035030152514568a87b7684337c532a0bd055133486c73f7eea56bb02dc3ad6acdd409700c01400000dff01000100000b000403000102160301079e0b00079a0007970003713082036d308202d6a003020102020101300d06092a864886f70d01010b050030 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0x34bf2a3235bc33c79ddc0c2553452e2c (1) Finished request Waking up in 4.9 seconds. (1) Cleaning up request packet ID 0 with timestamp +13 (2) Received Access-Request Id 0 from 10.215.147.140:49154 to 10.215.144.91:1812 length 110 (2) NAS-IP-Address = 10.215.147.140 (2) NAS-Port-Type = Ethernet (2) NAS-Port = 43 (2) User-Name = "DOMAIN\\" (2) State = 0x34bf2a3235bc33c79ddc0c2553452e2c (2) Calling-Station-Id = "DC-4A-3E-06-11-46" (2) EAP-Message = 0x020300061900 (2) Message-Authenticator = 0x5d8fa8b7bb7581cd3a019bd206184e37 (2) session-state: No cached attributes (2) # Executing section authorize from file /etc/raddb/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /(a)\./) { (2) if (&User-Name =~ /(a)\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) policy custom_filter_default { (2) policy rewrite_calling_station_id { (2) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (2) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) -> TRUE (2) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (2) update request { (2) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (2) --> DC-4A-3E-06-11-46 (2) &Calling-Station-Id := DC-4A-3E-06-11-46 (2) } # update request = noop (2) [updated] = updated (2) } # if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) = updated (2) ... skipping else: Preceding "if" was taken (2) } # policy rewrite_calling_station_id = updated (2) if ( ("%{sql:SELECT count(inf_pcs.Mac) FROM inf_pcs INNER JOIN inf_devices ON inf_pcs.DevName = inf_devices.E_Name WHERE ( inf_devices.Unused = 0 AND inf_devices.Removed = 0 AND ( inf_pcs.Mac = '%{Calling-Station-ID}' OR inf_pcs.Mac = '%{Calling-Station-ID};' OR inf_pcs.Mac LIKE '%%;%{Calling-Station-ID}%%' ) )}" <= 0) && ("%{sql:SELECT count(Mac) FROM inf_devices WHERE ( Unused = 0 AND Removed = 0 AND ( Mac = '%{Calling-Station-ID}' OR Mac = '%{Calling-Station-ID};' OR Mac LIKE '%%;%{Calling-Station-ID}%%' ) )}" <= 0) ) || (!EAP-Message) { rlm_sql (sql): Reserved connection (2) (2) Executing select query: SELECT count(inf_pcs.Mac) FROM inf_pcs INNER JOIN inf_devices ON inf_pcs.DevName = inf_devices.E_Name WHERE ( inf_devices.Unused = 0 AND inf_devices.Removed = 0 AND ( inf_pcs.Mac = 'DC-4A-3E-06-11-46' OR inf_pcs.Mac = 'DC-4A-3E-06-11-46;' OR inf_pcs.Mac LIKE '%;DC-4A-3E-06-11-46%' ) ) rlm_sql (sql): Released connection (2) (2) EXPAND %{sql:SELECT count(inf_pcs.Mac) FROM inf_pcs INNER JOIN inf_devices ON inf_pcs.DevName = inf_devices.E_Name WHERE ( inf_devices.Unused = 0 AND inf_devices.Removed = 0 AND ( inf_pcs.Mac = '%{Calling-Station-ID}' OR inf_pcs.Mac = '%{Calling-Station-ID};' OR inf_pcs.Mac LIKE '%%;%{Calling-Station-ID}%%' ) )} (2) --> 1 (2) if ( ("%{sql:SELECT count(inf_pcs.Mac) FROM inf_pcs INNER JOIN inf_devices ON inf_pcs.DevName = inf_devices.E_Name WHERE ( inf_devices.Unused = 0 AND inf_devices.Removed = 0 AND ( inf_pcs.Mac = '%{Calling-Station-ID}' OR inf_pcs.Mac = '%{Calling-Station-ID};' OR inf_pcs.Mac LIKE '%%;%{Calling-Station-ID}%%' ) )}" <= 0) && ("%{sql:SELECT count(Mac) FROM inf_devices WHERE ( Unused = 0 AND Removed = 0 AND ( Mac = '%{Calling-Station-ID}' OR Mac = '%{Calling-Station-ID};' OR Mac LIKE '%%;%{Calling-Station-ID}%%' ) )}" <= 0) ) || (!EAP-Message) -> FALSE (2) else { (2) if ( (User-Name) && (&User-Name =~ /^host\/(\w+)(\.\w+)*$/) ) { (2) if ( (User-Name) && (&User-Name =~ /^host\/(\w+)(\.\w+)*$/) ) -> FALSE (2) else { (2) eap: Peer sent EAP Response (code 2) ID 3 length 6 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # else = ok (2) } # else = ok (2) } # policy custom_filter_default = updated (2) [chap] = noop (2) [mschap] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "DOMAIN\", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) ntdomain: Checking for prefix before "\" (2) ntdomain: Looking up realm "DOMAIN" for User-Name = "DOMAIN\" (2) ntdomain: No such realm "DOMAIN" (2) [ntdomain] = noop (2) eap: Peer sent EAP Response (code 2) ID 3 length 6 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = eap (2) Found Auth-Type = eap (2) ERROR: Warning: Found 2 auth-types on request for user 'DOMAIN\' (2) # Executing group from file /etc/raddb/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0x34bf2a3235bc33c7 (2) eap: Finished EAP session with state 0x34bf2a3235bc33c7 (2) eap: Previous EAP request found for state 0x34bf2a3235bc33c7, released from the list (2) eap: Peer sent packet with method EAP PEAP (25) (2) eap: Calling submodule eap_peap to process data (2) eap_peap: Continuing EAP-TLS (2) eap_peap: Peer ACKed our handshake fragment (2) eap_peap: [eaptls verify] = request (2) eap_peap: [eaptls process] = handled (2) eap: Sending EAP Request (code 1) ID 4 length 1000 (2) eap: EAP session adding &reply:State = 0x34bf2a3236bb33c7 (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) # Executing group from file /etc/raddb/sites-enabled/default (2) Challenge { ... } # empty sub-section is ignored (2) Sent Access-Challenge Id 0 from 10.215.144.91:1812 to 10.215.147.140:49154 length 0 (2) EAP-Message = 0x010403e819408c310b30090603550406130245533111300f0603550408130842616c6561726573310d300b060355040a1304484d414e3110300e060355040b1307484d414e2049543120301e06035504031317484d414e31205369676e696e6720417574686f726974793127302506092a864886f70d01 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0x34bf2a3236bb33c79ddc0c2553452e2c (2) Finished request Waking up in 4.9 seconds. (2) Cleaning up request packet ID 0 with timestamp +13 (3) Received Access-Request Id 0 from 10.215.147.140:49154 to 10.215.144.91:1812 length 110 (3) NAS-IP-Address = 10.215.147.140 (3) NAS-Port-Type = Ethernet (3) NAS-Port = 43 (3) User-Name = "DOMAIN\\" (3) State = 0x34bf2a3236bb33c79ddc0c2553452e2c (3) Calling-Station-Id = "DC-4A-3E-06-11-46" (3) EAP-Message = 0x020400061900 (3) Message-Authenticator = 0x8e1e3b6a27415590c3d97729037505c9 (3) session-state: No cached attributes (3) # Executing section authorize from file /etc/raddb/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /(a)\./) { (3) if (&User-Name =~ /(a)\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) policy custom_filter_default { (3) policy rewrite_calling_station_id { (3) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (3) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) -> TRUE (3) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (3) update request { (3) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (3) --> DC-4A-3E-06-11-46 (3) &Calling-Station-Id := DC-4A-3E-06-11-46 (3) } # update request = noop (3) [updated] = updated (3) } # if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) = updated (3) ... skipping else: Preceding "if" was taken (3) } # policy rewrite_calling_station_id = updated (3) if ( ("%{sql:SELECT count(inf_pcs.Mac) FROM inf_pcs INNER JOIN inf_devices ON inf_pcs.DevName = inf_devices.E_Name WHERE ( inf_devices.Unused = 0 AND inf_devices.Removed = 0 AND ( inf_pcs.Mac = '%{Calling-Station-ID}' OR inf_pcs.Mac = '%{Calling-Station-ID};' OR inf_pcs.Mac LIKE '%%;%{Calling-Station-ID}%%' ) )}" <= 0) && ("%{sql:SELECT count(Mac) FROM inf_devices WHERE ( Unused = 0 AND Removed = 0 AND ( Mac = '%{Calling-Station-ID}' OR Mac = '%{Calling-Station-ID};' OR Mac LIKE '%%;%{Calling-Station-ID}%%' ) )}" <= 0) ) || (!EAP-Message) { rlm_sql (sql): Reserved connection (3) (3) Executing select query: SELECT count(inf_pcs.Mac) FROM inf_pcs INNER JOIN inf_devices ON inf_pcs.DevName = inf_devices.E_Name WHERE ( inf_devices.Unused = 0 AND inf_devices.Removed = 0 AND ( inf_pcs.Mac = 'DC-4A-3E-06-11-46' OR inf_pcs.Mac = 'DC-4A-3E-06-11-46;' OR inf_pcs.Mac LIKE '%;DC-4A-3E-06-11-46%' ) ) rlm_sql (sql): Released connection (3) (3) EXPAND %{sql:SELECT count(inf_pcs.Mac) FROM inf_pcs INNER JOIN inf_devices ON inf_pcs.DevName = inf_devices.E_Name WHERE ( inf_devices.Unused = 0 AND inf_devices.Removed = 0 AND ( inf_pcs.Mac = '%{Calling-Station-ID}' OR inf_pcs.Mac = '%{Calling-Station-ID};' OR inf_pcs.Mac LIKE '%%;%{Calling-Station-ID}%%' ) )} (3) --> 1 (3) if ( ("%{sql:SELECT count(inf_pcs.Mac) FROM inf_pcs INNER JOIN inf_devices ON inf_pcs.DevName = inf_devices.E_Name WHERE ( inf_devices.Unused = 0 AND inf_devices.Removed = 0 AND ( inf_pcs.Mac = '%{Calling-Station-ID}' OR inf_pcs.Mac = '%{Calling-Station-ID};' OR inf_pcs.Mac LIKE '%%;%{Calling-Station-ID}%%' ) )}" <= 0) && ("%{sql:SELECT count(Mac) FROM inf_devices WHERE ( Unused = 0 AND Removed = 0 AND ( Mac = '%{Calling-Station-ID}' OR Mac = '%{Calling-Station-ID};' OR Mac LIKE '%%;%{Calling-Station-ID}%%' ) )}" <= 0) ) || (!EAP-Message) -> FALSE (3) else { (3) if ( (User-Name) && (&User-Name =~ /^host\/(\w+)(\.\w+)*$/) ) { (3) if ( (User-Name) && (&User-Name =~ /^host\/(\w+)(\.\w+)*$/) ) -> FALSE (3) else { (3) eap: Peer sent EAP Response (code 2) ID 4 length 6 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # else = ok (3) } # else = ok (3) } # policy custom_filter_default = updated (3) [chap] = noop (3) [mschap] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "DOMAIN\", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) ntdomain: Checking for prefix before "\" (3) ntdomain: Looking up realm "DOMAIN" for User-Name = "DOMAIN\" (3) ntdomain: No such realm "DOMAIN" (3) [ntdomain] = noop (3) eap: Peer sent EAP Response (code 2) ID 4 length 6 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = eap (3) Found Auth-Type = eap (3) ERROR: Warning: Found 2 auth-types on request for user 'DOMAIN\' (3) # Executing group from file /etc/raddb/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0x34bf2a3236bb33c7 (3) eap: Finished EAP session with state 0x34bf2a3236bb33c7 (3) eap: Previous EAP request found for state 0x34bf2a3236bb33c7, released from the list (3) eap: Peer sent packet with method EAP PEAP (25) (3) eap: Calling submodule eap_peap to process data (3) eap_peap: Continuing EAP-TLS (3) eap_peap: Peer ACKed our handshake fragment (3) eap_peap: [eaptls verify] = request (3) eap_peap: [eaptls process] = handled (3) eap: Sending EAP Request (code 1) ID 5 length 380 (3) eap: EAP session adding &reply:State = 0x34bf2a3237ba33c7 (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) # Executing group from file /etc/raddb/sites-enabled/default (3) Challenge { ... } # empty sub-section is ignored (3) Sent Access-Challenge Id 0 from 10.215.144.91:1812 to 10.215.147.140:49154 length 0 (3) EAP-Message = 0x0105017c19005a46745a093ed65b25a7e51c8c12948bafea8d2c15b96b9be8af989508160301014b0c00014703001741044f35c498d1bdc0cdf29952d0b00d2e37e16a8f328f21b62c4200265a268e085fd7b6fdc266d5c5c63a378380bc6a615ff7edc9eaf89732cd65a135a4e9862cb1010006b5c5e5 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0x34bf2a3237ba33c79ddc0c2553452e2c (3) Finished request Waking up in 4.9 seconds. (3) Cleaning up request packet ID 0 with timestamp +13 (4) Received Access-Request Id 0 from 10.215.147.140:49154 to 10.215.144.91:1812 length 248 (4) NAS-IP-Address = 10.215.147.140 (4) NAS-Port-Type = Ethernet (4) NAS-Port = 43 (4) User-Name = "DOMAIN\\" (4) State = 0x34bf2a3237ba33c79ddc0c2553452e2c (4) Calling-Station-Id = "DC-4A-3E-06-11-46" (4) EAP-Message = 0x020500901980000000861603010046100000424104f4844e1053eac180c7e2e1a424835f71ffd98e4ccdec7ddabe0105ac0e95e6211391fb1a64f62624c15fcd8dec6c388b045a6ec587d3b0807b18deeec72ea9c614030100010116030100304908d3cd50706fa4ecbad90205fc75c564b4770c010934 (4) Message-Authenticator = 0xdcbb90b0c261561d3d361fc0263352e3 (4) session-state: No cached attributes (4) # Executing section authorize from file /etc/raddb/sites-enabled/default (4) authorize { (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /(a)\./) { (4) if (&User-Name =~ /(a)\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) policy custom_filter_default { (4) policy rewrite_calling_station_id { (4) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (4) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) -> TRUE (4) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (4) update request { (4) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (4) --> DC-4A-3E-06-11-46 (4) &Calling-Station-Id := DC-4A-3E-06-11-46 (4) } # update request = noop (4) [updated] = updated (4) } # if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) = updated (4) ... skipping else: Preceding "if" was taken (4) } # policy rewrite_calling_station_id = updated (4) if ( ("%{sql:SELECT count(inf_pcs.Mac) FROM inf_pcs INNER JOIN inf_devices ON inf_pcs.DevName = inf_devices.E_Name WHERE ( inf_devices.Unused = 0 AND inf_devices.Removed = 0 AND ( inf_pcs.Mac = '%{Calling-Station-ID}' OR inf_pcs.Mac = '%{Calling-Station-ID};' OR inf_pcs.Mac LIKE '%%;%{Calling-Station-ID}%%' ) )}" <= 0) && ("%{sql:SELECT count(Mac) FROM inf_devices WHERE ( Unused = 0 AND Removed = 0 AND ( Mac = '%{Calling-Station-ID}' OR Mac = '%{Calling-Station-ID};' OR Mac LIKE '%%;%{Calling-Station-ID}%%' ) )}" <= 0) ) || (!EAP-Message) { rlm_sql (sql): Reserved connection (4) (4) Executing select query: SELECT count(inf_pcs.Mac) FROM inf_pcs INNER JOIN inf_devices ON inf_pcs.DevName = inf_devices.E_Name WHERE ( inf_devices.Unused = 0 AND inf_devices.Removed = 0 AND ( inf_pcs.Mac = 'DC-4A-3E-06-11-46' OR inf_pcs.Mac = 'DC-4A-3E-06-11-46;' OR inf_pcs.Mac LIKE '%;DC-4A-3E-06-11-46%' ) ) rlm_sql (sql): Released connection (4) (4) EXPAND %{sql:SELECT count(inf_pcs.Mac) FROM inf_pcs INNER JOIN inf_devices ON inf_pcs.DevName = inf_devices.E_Name WHERE ( inf_devices.Unused = 0 AND inf_devices.Removed = 0 AND ( inf_pcs.Mac = '%{Calling-Station-ID}' OR inf_pcs.Mac = '%{Calling-Station-ID};' OR inf_pcs.Mac LIKE '%%;%{Calling-Station-ID}%%' ) )} (4) --> 1 (4) if ( ("%{sql:SELECT count(inf_pcs.Mac) FROM inf_pcs INNER JOIN inf_devices ON inf_pcs.DevName = inf_devices.E_Name WHERE ( inf_devices.Unused = 0 AND inf_devices.Removed = 0 AND ( inf_pcs.Mac = '%{Calling-Station-ID}' OR inf_pcs.Mac = '%{Calling-Station-ID};' OR inf_pcs.Mac LIKE '%%;%{Calling-Station-ID}%%' ) )}" <= 0) && ("%{sql:SELECT count(Mac) FROM inf_devices WHERE ( Unused = 0 AND Removed = 0 AND ( Mac = '%{Calling-Station-ID}' OR Mac = '%{Calling-Station-ID};' OR Mac LIKE '%%;%{Calling-Station-ID}%%' ) )}" <= 0) ) || (!EAP-Message) -> FALSE (4) else { (4) if ( (User-Name) && (&User-Name =~ /^host\/(\w+)(\.\w+)*$/) ) { (4) if ( (User-Name) && (&User-Name =~ /^host\/(\w+)(\.\w+)*$/) ) -> FALSE (4) else { (4) eap: Peer sent EAP Response (code 2) ID 5 length 144 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # else = ok (4) } # else = ok (4) } # policy custom_filter_default = updated (4) [chap] = noop (4) [mschap] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "DOMAIN\", looking up realm NULL (4) suffix: No such realm "NULL" (4) [suffix] = noop (4) ntdomain: Checking for prefix before "\" (4) ntdomain: Looking up realm "DOMAIN" for User-Name = "DOMAIN\" (4) ntdomain: No such realm "DOMAIN" (4) [ntdomain] = noop (4) eap: Peer sent EAP Response (code 2) ID 5 length 144 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) Found Auth-Type = eap (4) ERROR: Warning: Found 2 auth-types on request for user 'DOMAIN\' (4) # Executing group from file /etc/raddb/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0x34bf2a3237ba33c7 (4) eap: Finished EAP session with state 0x34bf2a3237ba33c7 (4) eap: Previous EAP request found for state 0x34bf2a3237ba33c7, released from the list (4) eap: Peer sent packet with method EAP PEAP (25) (4) eap: Calling submodule eap_peap to process data (4) eap_peap: Continuing EAP-TLS (4) eap_peap: Peer indicated complete TLS record size will be 134 bytes (4) eap_peap: Got complete TLS record (134 bytes) (4) eap_peap: [eaptls verify] = length included (4) eap_peap: <<< recv TLS 1.0 Handshake [length 0046], ClientKeyExchange (4) eap_peap: TLS_accept: SSLv3 read client key exchange A (4) eap_peap: TLS_accept: SSLv3 read certificate verify A (4) eap_peap: <<< recv TLS 1.0 ChangeCipherSpec [length 0001] (4) eap_peap: <<< recv TLS 1.0 Handshake [length 0010], Finished (4) eap_peap: TLS_accept: SSLv3 read finished A (4) eap_peap: >>> send TLS 1.0 ChangeCipherSpec [length 0001] (4) eap_peap: TLS_accept: SSLv3 write change cipher spec A (4) eap_peap: >>> send TLS 1.0 Handshake [length 0010], Finished (4) eap_peap: TLS_accept: SSLv3 write finished A (4) eap_peap: TLS_accept: SSLv3 flush data (4) eap_peap: (other): SSL negotiation finished successfully (4) eap_peap: SSL Connection Established (4) eap_peap: [eaptls process] = handled (4) eap: Sending EAP Request (code 1) ID 6 length 65 (4) eap: EAP session adding &reply:State = 0x34bf2a3230b933c7 (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) # Executing group from file /etc/raddb/sites-enabled/default (4) Challenge { ... } # empty sub-section is ignored (4) Sent Access-Challenge Id 0 from 10.215.144.91:1812 to 10.215.147.140:49154 length 0 (4) EAP-Message = 0x010600411900140301000101160301003015920e5ed41d52ceecc678c202f7a105444c65db18faf1224df5c2e3d7904e5bd963239c7e156c6c7c533f71ed8d6288 (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0x34bf2a3230b933c79ddc0c2553452e2c (4) Finished request Waking up in 4.9 seconds. (4) Cleaning up request packet ID 0 with timestamp +13 (5) Received Access-Request Id 0 from 10.215.147.140:49154 to 10.215.144.91:1812 length 110 (5) NAS-IP-Address = 10.215.147.140 (5) NAS-Port-Type = Ethernet (5) NAS-Port = 43 (5) User-Name = "DOMAIN\\" (5) State = 0x34bf2a3230b933c79ddc0c2553452e2c (5) Calling-Station-Id = "DC-4A-3E-06-11-46" (5) EAP-Message = 0x020600061900 (5) Message-Authenticator = 0x161eb7412ee31398916dc226726ede3c (5) session-state: No cached attributes (5) # Executing section authorize from file /etc/raddb/sites-enabled/default (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /(a)\./) { (5) if (&User-Name =~ /(a)\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) policy custom_filter_default { (5) policy rewrite_calling_station_id { (5) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (5) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) -> TRUE (5) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (5) update request { (5) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (5) --> DC-4A-3E-06-11-46 (5) &Calling-Station-Id := DC-4A-3E-06-11-46 (5) } # update request = noop (5) [updated] = updated (5) } # if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) = updated (5) ... skipping else: Preceding "if" was taken (5) } # policy rewrite_calling_station_id = updated (5) if ( ("%{sql:SELECT count(inf_pcs.Mac) FROM inf_pcs INNER JOIN inf_devices ON inf_pcs.DevName = inf_devices.E_Name WHERE ( inf_devices.Unused = 0 AND inf_devices.Removed = 0 AND ( inf_pcs.Mac = '%{Calling-Station-ID}' OR inf_pcs.Mac = '%{Calling-Station-ID};' OR inf_pcs.Mac LIKE '%%;%{Calling-Station-ID}%%' ) )}" <= 0) && ("%{sql:SELECT count(Mac) FROM inf_devices WHERE ( Unused = 0 AND Removed = 0 AND ( Mac = '%{Calling-Station-ID}' OR Mac = '%{Calling-Station-ID};' OR Mac LIKE '%%;%{Calling-Station-ID}%%' ) )}" <= 0) ) || (!EAP-Message) { rlm_sql (sql): Reserved connection (0) (5) Executing select query: SELECT count(inf_pcs.Mac) FROM inf_pcs INNER JOIN inf_devices ON inf_pcs.DevName = inf_devices.E_Name WHERE ( inf_devices.Unused = 0 AND inf_devices.Removed = 0 AND ( inf_pcs.Mac = 'DC-4A-3E-06-11-46' OR inf_pcs.Mac = 'DC-4A-3E-06-11-46;' OR inf_pcs.Mac LIKE '%;DC-4A-3E-06-11-46%' ) ) rlm_sql (sql): Released connection (0) (5) EXPAND %{sql:SELECT count(inf_pcs.Mac) FROM inf_pcs INNER JOIN inf_devices ON inf_pcs.DevName = inf_devices.E_Name WHERE ( inf_devices.Unused = 0 AND inf_devices.Removed = 0 AND ( inf_pcs.Mac = '%{Calling-Station-ID}' OR inf_pcs.Mac = '%{Calling-Station-ID};' OR inf_pcs.Mac LIKE '%%;%{Calling-Station-ID}%%' ) )} (5) --> 1 (5) if ( ("%{sql:SELECT count(inf_pcs.Mac) FROM inf_pcs INNER JOIN inf_devices ON inf_pcs.DevName = inf_devices.E_Name WHERE ( inf_devices.Unused = 0 AND inf_devices.Removed = 0 AND ( inf_pcs.Mac = '%{Calling-Station-ID}' OR inf_pcs.Mac = '%{Calling-Station-ID};' OR inf_pcs.Mac LIKE '%%;%{Calling-Station-ID}%%' ) )}" <= 0) && ("%{sql:SELECT count(Mac) FROM inf_devices WHERE ( Unused = 0 AND Removed = 0 AND ( Mac = '%{Calling-Station-ID}' OR Mac = '%{Calling-Station-ID};' OR Mac LIKE '%%;%{Calling-Station-ID}%%' ) )}" <= 0) ) || (!EAP-Message) -> FALSE (5) else { (5) if ( (User-Name) && (&User-Name =~ /^host\/(\w+)(\.\w+)*$/) ) { (5) if ( (User-Name) && (&User-Name =~ /^host\/(\w+)(\.\w+)*$/) ) -> FALSE (5) else { (5) eap: Peer sent EAP Response (code 2) ID 6 length 6 (5) eap: Continuing tunnel setup (5) [eap] = ok (5) } # else = ok (5) } # else = ok (5) } # policy custom_filter_default = updated (5) [chap] = noop (5) [mschap] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "DOMAIN\", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) ntdomain: Checking for prefix before "\" (5) ntdomain: Looking up realm "DOMAIN" for User-Name = "DOMAIN\" (5) ntdomain: No such realm "DOMAIN" (5) [ntdomain] = noop (5) eap: Peer sent EAP Response (code 2) ID 6 length 6 (5) eap: Continuing tunnel setup (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = eap (5) Found Auth-Type = eap (5) ERROR: Warning: Found 2 auth-types on request for user 'DOMAIN\' (5) # Executing group from file /etc/raddb/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0x34bf2a3230b933c7 (5) eap: Finished EAP session with state 0x34bf2a3230b933c7 (5) eap: Previous EAP request found for state 0x34bf2a3230b933c7, released from the list (5) eap: Peer sent packet with method EAP PEAP (25) (5) eap: Calling submodule eap_peap to process data (5) eap_peap: Continuing EAP-TLS (5) eap_peap: Peer ACKed our handshake fragment. handshake is finished (5) eap_peap: [eaptls verify] = success (5) eap_peap: [eaptls process] = success (5) eap_peap: Session established. Decoding tunneled attributes (5) eap_peap: PEAP state TUNNEL ESTABLISHED (5) eap: Sending EAP Request (code 1) ID 7 length 43 (5) eap: EAP session adding &reply:State = 0x34bf2a3231b833c7 (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) # Executing group from file /etc/raddb/sites-enabled/default (5) Challenge { ... } # empty sub-section is ignored (5) Sent Access-Challenge Id 0 from 10.215.144.91:1812 to 10.215.147.140:49154 length 0 (5) EAP-Message = 0x0107002b1900170301002059a55c260d70bc1835c9081e680673c6ca1b5d2cda524657132a0f83eefb55bb (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0x34bf2a3231b833c79ddc0c2553452e2c (5) Finished request Waking up in 4.9 seconds. (5) Cleaning up request packet ID 0 with timestamp +13 (6) Received Access-Request Id 0 from 10.215.147.140:49154 to 10.215.144.91:1812 length 163 (6) NAS-IP-Address = 10.215.147.140 (6) NAS-Port-Type = Ethernet (6) NAS-Port = 43 (6) User-Name = "DOMAIN\\" (6) State = 0x34bf2a3231b833c79ddc0c2553452e2c (6) Calling-Station-Id = "DC-4A-3E-06-11-46" (6) EAP-Message = 0x0207003b1900170301003055eff99a3cafdbeb267ae2fc80335af5a2698d23abb147b1d45ebb764effe538e9ffa61d3fbf60942f7392067dff83ee (6) Message-Authenticator = 0xbdf2783b5eafd296981c47f86b4d9b88 (6) session-state: No cached attributes (6) # Executing section authorize from file /etc/raddb/sites-enabled/default (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /(a)\./) { (6) if (&User-Name =~ /(a)\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [preprocess] = ok (6) policy custom_filter_default { (6) policy rewrite_calling_station_id { (6) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (6) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) -> TRUE (6) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (6) update request { (6) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (6) --> DC-4A-3E-06-11-46 (6) &Calling-Station-Id := DC-4A-3E-06-11-46 (6) } # update request = noop (6) [updated] = updated (6) } # if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) = updated (6) ... skipping else: Preceding "if" was taken (6) } # policy rewrite_calling_station_id = updated (6) if ( ("%{sql:SELECT count(inf_pcs.Mac) FROM inf_pcs INNER JOIN inf_devices ON inf_pcs.DevName = inf_devices.E_Name WHERE ( inf_devices.Unused = 0 AND inf_devices.Removed = 0 AND ( inf_pcs.Mac = '%{Calling-Station-ID}' OR inf_pcs.Mac = '%{Calling-Station-ID};' OR inf_pcs.Mac LIKE '%%;%{Calling-Station-ID}%%' ) )}" <= 0) && ("%{sql:SELECT count(Mac) FROM inf_devices WHERE ( Unused = 0 AND Removed = 0 AND ( Mac = '%{Calling-Station-ID}' OR Mac = '%{Calling-Station-ID};' OR Mac LIKE '%%;%{Calling-Station-ID}%%' ) )}" <= 0) ) || (!EAP-Message) { rlm_sql (sql): Reserved connection (5) (6) Executing select query: SELECT count(inf_pcs.Mac) FROM inf_pcs INNER JOIN inf_devices ON inf_pcs.DevName = inf_devices.E_Name WHERE ( inf_devices.Unused = 0 AND inf_devices.Removed = 0 AND ( inf_pcs.Mac = 'DC-4A-3E-06-11-46' OR inf_pcs.Mac = 'DC-4A-3E-06-11-46;' OR inf_pcs.Mac LIKE '%;DC-4A-3E-06-11-46%' ) ) rlm_sql (sql): Released connection (5) (6) EXPAND %{sql:SELECT count(inf_pcs.Mac) FROM inf_pcs INNER JOIN inf_devices ON inf_pcs.DevName = inf_devices.E_Name WHERE ( inf_devices.Unused = 0 AND inf_devices.Removed = 0 AND ( inf_pcs.Mac = '%{Calling-Station-ID}' OR inf_pcs.Mac = '%{Calling-Station-ID};' OR inf_pcs.Mac LIKE '%%;%{Calling-Station-ID}%%' ) )} (6) --> 1 (6) if ( ("%{sql:SELECT count(inf_pcs.Mac) FROM inf_pcs INNER JOIN inf_devices ON inf_pcs.DevName = inf_devices.E_Name WHERE ( inf_devices.Unused = 0 AND inf_devices.Removed = 0 AND ( inf_pcs.Mac = '%{Calling-Station-ID}' OR inf_pcs.Mac = '%{Calling-Station-ID};' OR inf_pcs.Mac LIKE '%%;%{Calling-Station-ID}%%' ) )}" <= 0) && ("%{sql:SELECT count(Mac) FROM inf_devices WHERE ( Unused = 0 AND Removed = 0 AND ( Mac = '%{Calling-Station-ID}' OR Mac = '%{Calling-Station-ID};' OR Mac LIKE '%%;%{Calling-Station-ID}%%' ) )}" <= 0) ) || (!EAP-Message) -> FALSE (6) else { (6) if ( (User-Name) && (&User-Name =~ /^host\/(\w+)(\.\w+)*$/) ) { (6) if ( (User-Name) && (&User-Name =~ /^host\/(\w+)(\.\w+)*$/) ) -> FALSE (6) else { (6) eap: Peer sent EAP Response (code 2) ID 7 length 59 (6) eap: Continuing tunnel setup (6) [eap] = ok (6) } # else = ok (6) } # else = ok (6) } # policy custom_filter_default = updated (6) [chap] = noop (6) [mschap] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "DOMAIN\", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) ntdomain: Checking for prefix before "\" (6) ntdomain: Looking up realm "DOMAIN" for User-Name = "DOMAIN\" (6) ntdomain: No such realm "DOMAIN" (6) [ntdomain] = noop (6) eap: Peer sent EAP Response (code 2) ID 7 length 59 (6) eap: Continuing tunnel setup (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) Found Auth-Type = eap (6) ERROR: Warning: Found 2 auth-types on request for user 'DOMAIN\' (6) # Executing group from file /etc/raddb/sites-enabled/default (6) authenticate { (6) eap: Expiring EAP session with state 0x34bf2a3231b833c7 (6) eap: Finished EAP session with state 0x34bf2a3231b833c7 (6) eap: Previous EAP request found for state 0x34bf2a3231b833c7, released from the list (6) eap: Peer sent packet with method EAP PEAP (25) (6) eap: Calling submodule eap_peap to process data (6) eap_peap: Continuing EAP-TLS (6) eap_peap: [eaptls verify] = ok (6) eap_peap: Done initial handshake (6) eap_peap: [eaptls process] = ok (6) eap_peap: Session established. Decoding tunneled attributes (6) eap_peap: PEAP state WAITING FOR INNER IDENTITY (6) eap_peap: Identity - DOMAIN\adminpc (6) eap_peap: Got inner identity 'DOMAIN\adminpc' (6) eap_peap: Setting default EAP type for tunneled EAP session (6) eap_peap: Got tunneled request (6) eap_peap: EAP-Message = 0x0207001301444f4d41494e5c61646d696e7063 (6) eap_peap: Setting User-Name to DOMAIN\adminpc (6) eap_peap: Sending tunneled request to inner-tunnel (6) eap_peap: EAP-Message = 0x0207001301444f4d41494e5c61646d696e7063 (6) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (6) eap_peap: User-Name = "DOMAIN\\adminpc" (6) Virtual server inner-tunnel received request (6) EAP-Message = 0x0207001301444f4d41494e5c61646d696e7063 (6) FreeRADIUS-Proxied-To = 127.0.0.1 (6) User-Name = "DOMAIN\\adminpc" (6) WARNING: Outer User-Name is not anonymized. User privacy is compromised. (6) server inner-tunnel { (6) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /(a)\./) { (6) if (&User-Name =~ /(a)\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) policy custom_split_username_nai { (6) if (&User-Name && (&User-Name =~ /^(\w+)(a)(.*)$/)) { (6) if (&User-Name && (&User-Name =~ /^(\w+)(a)(.*)$/)) -> FALSE (6) else { (6) if (&User-Name && (&User-Name =~ /^(.*)\\(\w+)$/)) { (6) if (&User-Name && (&User-Name =~ /^(.*)\\(\w+)$/)) -> TRUE (6) if (&User-Name && (&User-Name =~ /^(.*)\\(\w+)$/)) { (6) update request { (6) EXPAND %{2} (6) --> adminpc (6) &Stripped-User-Name := adminpc (6) EXPAND %{1} (6) --> DOMAIN (6) &Stripped-User-Domain = DOMAIN (6) } # update request = noop (6) [updated] = updated (6) } # if (&User-Name && (&User-Name =~ /^(.*)\\(\w+)$/)) = updated (6) ... skipping else: Preceding "if" was taken (6) } # else = updated (6) } # policy custom_split_username_nai = updated (6) policy custom_filter_inner_tunnel { (6) if ( (User-Name) && (&User-Name =~ /^host\/(\w+)(\.\w+)*$/) ) { (6) if ( (User-Name) && (&User-Name =~ /^host\/(\w+)(\.\w+)*$/) ) -> FALSE (6) } # policy custom_filter_inner_tunnel = updated (6) [chap] = noop (6) [mschap] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "adminpc", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) update control { (6) &Proxy-To-Realm := LOCAL (6) } # update control = noop (6) eap: Peer sent EAP Response (code 2) ID 7 length 19 (6) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (6) authenticate { (6) eap: Peer sent packet with method EAP Identity (1) (6) eap: Calling submodule eap_mschapv2 to process data (6) eap_mschapv2: Issuing Challenge (6) eap: Sending EAP Request (code 1) ID 8 length 43 (6) eap: EAP session adding &reply:State = 0x241fa4362417be94 (6) [eap] = handled (6) } # authenticate = handled (6) } # server inner-tunnel (6) Virtual server sending reply (6) EAP-Message = 0x0108002b1a0108002610ec6db14d824cbbcbc671d6ab625f9dc4667265657261646975732d332e302e3134 (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0x241fa4362417be94c32591fd0ea88635 (6) eap_peap: Got tunneled reply code 11 (6) eap_peap: EAP-Message = 0x0108002b1a0108002610ec6db14d824cbbcbc671d6ab625f9dc4667265657261646975732d332e302e3134 (6) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (6) eap_peap: State = 0x241fa4362417be94c32591fd0ea88635 (6) eap_peap: Got tunneled reply RADIUS code 11 (6) eap_peap: EAP-Message = 0x0108002b1a0108002610ec6db14d824cbbcbc671d6ab625f9dc4667265657261646975732d332e302e3134 (6) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (6) eap_peap: State = 0x241fa4362417be94c32591fd0ea88635 (6) eap_peap: Got tunneled Access-Challenge (6) eap: Sending EAP Request (code 1) ID 8 length 75 (6) eap: EAP session adding &reply:State = 0x34bf2a3232b733c7 (6) [eap] = handled (6) } # authenticate = handled (6) Using Post-Auth-Type Challenge (6) # Executing group from file /etc/raddb/sites-enabled/default (6) Challenge { ... } # empty sub-section is ignored (6) Sent Access-Challenge Id 0 from 10.215.144.91:1812 to 10.215.147.140:49154 length 0 (6) EAP-Message = 0x0108004b1900170301004085c5b15480186de43b25f0e778a9f1a201119b7566e3fadbf1af4aa8ef8b74293c1b5122e3d00fbbc1ad2003cc016eec085a58d1f68c84c1e61a8495e8efbd75 (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0x34bf2a3232b733c79ddc0c2553452e2c (6) Finished request Waking up in 4.9 seconds. (6) Cleaning up request packet ID 0 with timestamp +13 (7) Received Access-Request Id 0 from 10.215.147.140:49154 to 10.215.144.91:1812 length 211 (7) NAS-IP-Address = 10.215.147.140 (7) NAS-Port-Type = Ethernet (7) NAS-Port = 43 (7) User-Name = "DOMAIN\\" (7) State = 0x34bf2a3232b733c79ddc0c2553452e2c (7) Calling-Station-Id = "DC-4A-3E-06-11-46" (7) EAP-Message = 0x0208006b19001703010060bc0709e3fc83742dec9ac2f6edc98a4512d180119da6f27ea1f003659f19c8a51cea9c0a82ee4ba0cbab055d52d9219876bec23a63c13ba6cc135a48e080925bf8ad5722796cd8e4a711a2edc8a18f4fe5a8bcc2db7c0371418c08b511b6f3d5 (7) Message-Authenticator = 0x7d98dc75bb7a704974e3eb633ec05150 (7) session-state: No cached attributes (7) # Executing section authorize from file /etc/raddb/sites-enabled/default (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /(a)\./) { (7) if (&User-Name =~ /(a)\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [preprocess] = ok (7) policy custom_filter_default { (7) policy rewrite_calling_station_id { (7) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (7) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) -> TRUE (7) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (7) update request { (7) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (7) --> DC-4A-3E-06-11-46 (7) &Calling-Station-Id := DC-4A-3E-06-11-46 (7) } # update request = noop (7) [updated] = updated (7) } # if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) = updated (7) ... skipping else: Preceding "if" was taken (7) } # policy rewrite_calling_station_id = updated (7) if ( ("%{sql:SELECT count(inf_pcs.Mac) FROM inf_pcs INNER JOIN inf_devices ON inf_pcs.DevName = inf_devices.E_Name WHERE ( inf_devices.Unused = 0 AND inf_devices.Removed = 0 AND ( inf_pcs.Mac = '%{Calling-Station-ID}' OR inf_pcs.Mac = '%{Calling-Station-ID};' OR inf_pcs.Mac LIKE '%%;%{Calling-Station-ID}%%' ) )}" <= 0) && ("%{sql:SELECT count(Mac) FROM inf_devices WHERE ( Unused = 0 AND Removed = 0 AND ( Mac = '%{Calling-Station-ID}' OR Mac = '%{Calling-Station-ID};' OR Mac LIKE '%%;%{Calling-Station-ID}%%' ) )}" <= 0) ) || (!EAP-Message) { rlm_sql (sql): Reserved connection (1) (7) Executing select query: SELECT count(inf_pcs.Mac) FROM inf_pcs INNER JOIN inf_devices ON inf_pcs.DevName = inf_devices.E_Name WHERE ( inf_devices.Unused = 0 AND inf_devices.Removed = 0 AND ( inf_pcs.Mac = 'DC-4A-3E-06-11-46' OR inf_pcs.Mac = 'DC-4A-3E-06-11-46;' OR inf_pcs.Mac LIKE '%;DC-4A-3E-06-11-46%' ) ) rlm_sql (sql): Released connection (1) (7) EXPAND %{sql:SELECT count(inf_pcs.Mac) FROM inf_pcs INNER JOIN inf_devices ON inf_pcs.DevName = inf_devices.E_Name WHERE ( inf_devices.Unused = 0 AND inf_devices.Removed = 0 AND ( inf_pcs.Mac = '%{Calling-Station-ID}' OR inf_pcs.Mac = '%{Calling-Station-ID};' OR inf_pcs.Mac LIKE '%%;%{Calling-Station-ID}%%' ) )} (7) --> 1 (7) if ( ("%{sql:SELECT count(inf_pcs.Mac) FROM inf_pcs INNER JOIN inf_devices ON inf_pcs.DevName = inf_devices.E_Name WHERE ( inf_devices.Unused = 0 AND inf_devices.Removed = 0 AND ( inf_pcs.Mac = '%{Calling-Station-ID}' OR inf_pcs.Mac = '%{Calling-Station-ID};' OR inf_pcs.Mac LIKE '%%;%{Calling-Station-ID}%%' ) )}" <= 0) && ("%{sql:SELECT count(Mac) FROM inf_devices WHERE ( Unused = 0 AND Removed = 0 AND ( Mac = '%{Calling-Station-ID}' OR Mac = '%{Calling-Station-ID};' OR Mac LIKE '%%;%{Calling-Station-ID}%%' ) )}" <= 0) ) || (!EAP-Message) -> FALSE (7) else { (7) if ( (User-Name) && (&User-Name =~ /^host\/(\w+)(\.\w+)*$/) ) { (7) if ( (User-Name) && (&User-Name =~ /^host\/(\w+)(\.\w+)*$/) ) -> FALSE (7) else { (7) eap: Peer sent EAP Response (code 2) ID 8 length 107 (7) eap: Continuing tunnel setup (7) [eap] = ok (7) } # else = ok (7) } # else = ok (7) } # policy custom_filter_default = updated (7) [chap] = noop (7) [mschap] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "DOMAIN\", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) ntdomain: Checking for prefix before "\" (7) ntdomain: Looking up realm "DOMAIN" for User-Name = "DOMAIN\" (7) ntdomain: No such realm "DOMAIN" (7) [ntdomain] = noop (7) eap: Peer sent EAP Response (code 2) ID 8 length 107 (7) eap: Continuing tunnel setup (7) [eap] = ok (7) } # authorize = ok (7) Found Auth-Type = eap (7) Found Auth-Type = eap (7) ERROR: Warning: Found 2 auth-types on request for user 'DOMAIN\' (7) # Executing group from file /etc/raddb/sites-enabled/default (7) authenticate { (7) eap: Expiring EAP session with state 0x241fa4362417be94 (7) eap: Finished EAP session with state 0x34bf2a3232b733c7 (7) eap: Previous EAP request found for state 0x34bf2a3232b733c7, released from the list (7) eap: Peer sent packet with method EAP PEAP (25) (7) eap: Calling submodule eap_peap to process data (7) eap_peap: Continuing EAP-TLS (7) eap_peap: [eaptls verify] = ok (7) eap_peap: Done initial handshake (7) eap_peap: [eaptls process] = ok (7) eap_peap: Session established. Decoding tunneled attributes (7) eap_peap: PEAP state phase2 (7) eap_peap: EAP method MSCHAPv2 (26) (7) eap_peap: Got tunneled request (7) eap_peap: EAP-Message = 0x020800491a0208004431811f1a12259a2da16ac45c2c080c627c0000000000000000ddb521a032f883a215197e2689b89f92fe405a3a0392f92900444f4d41494e5c61646d696e7063 (7) eap_peap: Setting User-Name to DOMAIN\adminpc (7) eap_peap: Sending tunneled request to inner-tunnel (7) eap_peap: EAP-Message = 0x020800491a0208004431811f1a12259a2da16ac45c2c080c627c0000000000000000ddb521a032f883a215197e2689b89f92fe405a3a0392f92900444f4d41494e5c61646d696e7063 (7) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (7) eap_peap: User-Name = "DOMAIN\\adminpc" (7) eap_peap: State = 0x241fa4362417be94c32591fd0ea88635 (7) Virtual server inner-tunnel received request (7) EAP-Message = 0x020800491a0208004431811f1a12259a2da16ac45c2c080c627c0000000000000000ddb521a032f883a215197e2689b89f92fe405a3a0392f92900444f4d41494e5c61646d696e7063 (7) FreeRADIUS-Proxied-To = 127.0.0.1 (7) User-Name = "DOMAIN\\adminpc" (7) State = 0x241fa4362417be94c32591fd0ea88635 (7) WARNING: Outer User-Name is not anonymized. User privacy is compromised. (7) server inner-tunnel { (7) session-state: No cached attributes (7) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /(a)\./) { (7) if (&User-Name =~ /(a)\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) policy custom_split_username_nai { (7) if (&User-Name && (&User-Name =~ /^(\w+)(a)(.*)$/)) { (7) if (&User-Name && (&User-Name =~ /^(\w+)(a)(.*)$/)) -> FALSE (7) else { (7) if (&User-Name && (&User-Name =~ /^(.*)\\(\w+)$/)) { (7) if (&User-Name && (&User-Name =~ /^(.*)\\(\w+)$/)) -> TRUE (7) if (&User-Name && (&User-Name =~ /^(.*)\\(\w+)$/)) { (7) update request { (7) EXPAND %{2} (7) --> adminpc (7) &Stripped-User-Name := adminpc (7) EXPAND %{1} (7) --> DOMAIN (7) &Stripped-User-Domain = DOMAIN (7) } # update request = noop (7) [updated] = updated (7) } # if (&User-Name && (&User-Name =~ /^(.*)\\(\w+)$/)) = updated (7) ... skipping else: Preceding "if" was taken (7) } # else = updated (7) } # policy custom_split_username_nai = updated (7) policy custom_filter_inner_tunnel { (7) if ( (User-Name) && (&User-Name =~ /^host\/(\w+)(\.\w+)*$/) ) { (7) if ( (User-Name) && (&User-Name =~ /^host\/(\w+)(\.\w+)*$/) ) -> FALSE (7) } # policy custom_filter_inner_tunnel = updated (7) [chap] = noop (7) [mschap] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "adminpc", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) update control { (7) &Proxy-To-Realm := LOCAL (7) } # update control = noop (7) eap: Peer sent EAP Response (code 2) ID 8 length 73 (7) eap: No EAP Start, assuming it's an on-going EAP conversation (7) [eap] = updated (7) [files] = noop (7) [expiration] = noop (7) [logintime] = noop (7) [pap] = noop (7) } # authorize = updated (7) Found Auth-Type = eap (7) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (7) authenticate { (7) eap: Expiring EAP session with state 0x241fa4362417be94 (7) eap: Finished EAP session with state 0x241fa4362417be94 (7) eap: Previous EAP request found for state 0x241fa4362417be94, released from the list (7) eap: Peer sent packet with method EAP MSCHAPv2 (26) (7) eap: Calling submodule eap_mschapv2 to process data (7) eap_mschapv2: # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (7) eap_mschapv2: authenticate { (7) mschap: Creating challenge hash with username: adminpc (7) mschap: Client is using MS-CHAPv2 (7) mschap: Executing: /usr/bin/ntlm_auth --request-nt-key --username=%{%{Stripped-User-Name}:-%{%{User-Name}:-None}} --challenge=%{%{mschap:Challenge}:-00} --nt-response=%{%{mschap:NT-Response}:-00} --require-membership-of=DOMAIN\\Domain\ Users --domain=%{%{Stripped-User-Domain}:-00}: (7) mschap: EXPAND --username=%{%{Stripped-User-Name}:-%{%{User-Name}:-None}} (7) mschap: --> --username=adminpc (7) mschap: Creating challenge hash with username: adminpc (7) mschap: EXPAND --challenge=%{%{mschap:Challenge}:-00} (7) mschap: --> --challenge=cd3c779718087aaf (7) mschap: EXPAND --nt-response=%{%{mschap:NT-Response}:-00} (7) mschap: --> --nt-response=ddb521a032f883a215197e2689b89f92fe405a3a0392f929 (7) mschap: EXPAND --domain=%{%{Stripped-User-Domain}:-00} (7) mschap: --> --domain=DOMAIN (7) mschap: Program returned code (0) and output 'NT_KEY: 2714ABAFC5F47D614AFCA53A01966C1F' (7) mschap: Adding MS-CHAPv2 MPPE keys (7) [mschap] = ok (7) } # authenticate = ok (7) MSCHAP Success (7) eap: Sending EAP Request (code 1) ID 9 length 51 (7) eap: EAP session adding &reply:State = 0x241fa4362516be94 (7) [eap] = handled (7) } # authenticate = handled (7) } # server inner-tunnel (7) Virtual server sending reply (7) EAP-Message = 0x010900331a0308002e533d45353333314236373746323233324537363845313044413746453146374445354233304332344143 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0x241fa4362516be94c32591fd0ea88635 (7) eap_peap: Got tunneled reply code 11 (7) eap_peap: EAP-Message = 0x010900331a0308002e533d45353333314236373746323233324537363845313044413746453146374445354233304332344143 (7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_peap: State = 0x241fa4362516be94c32591fd0ea88635 (7) eap_peap: Got tunneled reply RADIUS code 11 (7) eap_peap: EAP-Message = 0x010900331a0308002e533d45353333314236373746323233324537363845313044413746453146374445354233304332344143 (7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_peap: State = 0x241fa4362516be94c32591fd0ea88635 (7) eap_peap: Got tunneled Access-Challenge (7) eap: Sending EAP Request (code 1) ID 9 length 91 (7) eap: EAP session adding &reply:State = 0x34bf2a3233b633c7 (7) [eap] = handled (7) } # authenticate = handled (7) Using Post-Auth-Type Challenge (7) # Executing group from file /etc/raddb/sites-enabled/default (7) Challenge { ... } # empty sub-section is ignored (7) Sent Access-Challenge Id 0 from 10.215.144.91:1812 to 10.215.147.140:49154 length 0 (7) EAP-Message = 0x0109005b190017030100506bfde6428381b3ee1e2a3db2c7ed598b50c698dc78776bf784e399e957889cdfd9d436685ab18dd93466dba26393fba93395f96e5bb6786949ee2b892826f8ba67d1fbbb83b80ebf13134c4ef22a962b (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0x34bf2a3233b633c79ddc0c2553452e2c (7) Finished request Waking up in 4.9 seconds. (7) Cleaning up request packet ID 0 with timestamp +13 (8) Received Access-Request Id 0 from 10.215.147.140:49154 to 10.215.144.91:1812 length 147 (8) NAS-IP-Address = 10.215.147.140 (8) NAS-Port-Type = Ethernet (8) NAS-Port = 43 (8) User-Name = "DOMAIN\\" (8) State = 0x34bf2a3233b633c79ddc0c2553452e2c (8) Calling-Station-Id = "DC-4A-3E-06-11-46" (8) EAP-Message = 0x0209002b19001703010020d27748b18135e0f064e88cd497108df6b00ef5a6d5a546bd6afc3dc0a58a1503 (8) Message-Authenticator = 0xff9a4172f880589f940cf8455b4f5bb6 (8) session-state: No cached attributes (8) # Executing section authorize from file /etc/raddb/sites-enabled/default (8) authorize { (8) policy filter_username { (8) if (&User-Name) { (8) if (&User-Name) -> TRUE (8) if (&User-Name) { (8) if (&User-Name =~ / /) { (8) if (&User-Name =~ / /) -> FALSE (8) if (&User-Name =~ /@[^@]*@/ ) { (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (8) if (&User-Name =~ /\.\./ ) { (8) if (&User-Name =~ /\.\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\.$/) { (8) if (&User-Name =~ /\.$/) -> FALSE (8) if (&User-Name =~ /(a)\./) { (8) if (&User-Name =~ /(a)\./) -> FALSE (8) } # if (&User-Name) = notfound (8) } # policy filter_username = notfound (8) [preprocess] = ok (8) policy custom_filter_default { (8) policy rewrite_calling_station_id { (8) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (8) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) -> TRUE (8) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (8) update request { (8) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (8) --> DC-4A-3E-06-11-46 (8) &Calling-Station-Id := DC-4A-3E-06-11-46 (8) } # update request = noop (8) [updated] = updated (8) } # if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) = updated (8) ... skipping else: Preceding "if" was taken (8) } # policy rewrite_calling_station_id = updated (8) if ( ("%{sql:SELECT count(inf_pcs.Mac) FROM inf_pcs INNER JOIN inf_devices ON inf_pcs.DevName = inf_devices.E_Name WHERE ( inf_devices.Unused = 0 AND inf_devices.Removed = 0 AND ( inf_pcs.Mac = '%{Calling-Station-ID}' OR inf_pcs.Mac = '%{Calling-Station-ID};' OR inf_pcs.Mac LIKE '%%;%{Calling-Station-ID}%%' ) )}" <= 0) && ("%{sql:SELECT count(Mac) FROM inf_devices WHERE ( Unused = 0 AND Removed = 0 AND ( Mac = '%{Calling-Station-ID}' OR Mac = '%{Calling-Station-ID};' OR Mac LIKE '%%;%{Calling-Station-ID}%%' ) )}" <= 0) ) || (!EAP-Message) { rlm_sql (sql): Reserved connection (2) (8) Executing select query: SELECT count(inf_pcs.Mac) FROM inf_pcs INNER JOIN inf_devices ON inf_pcs.DevName = inf_devices.E_Name WHERE ( inf_devices.Unused = 0 AND inf_devices.Removed = 0 AND ( inf_pcs.Mac = 'DC-4A-3E-06-11-46' OR inf_pcs.Mac = 'DC-4A-3E-06-11-46;' OR inf_pcs.Mac LIKE '%;DC-4A-3E-06-11-46%' ) ) rlm_sql (sql): Released connection (2) Need 4 more connections to reach 10 spares rlm_sql (sql): Opening additional connection (6), 1 of 26 pending slots used (8) EXPAND %{sql:SELECT count(inf_pcs.Mac) FROM inf_pcs INNER JOIN inf_devices ON inf_pcs.DevName = inf_devices.E_Name WHERE ( inf_devices.Unused = 0 AND inf_devices.Removed = 0 AND ( inf_pcs.Mac = '%{Calling-Station-ID}' OR inf_pcs.Mac = '%{Calling-Station-ID};' OR inf_pcs.Mac LIKE '%%;%{Calling-Station-ID}%%' ) )} (8) --> 1 (8) if ( ("%{sql:SELECT count(inf_pcs.Mac) FROM inf_pcs INNER JOIN inf_devices ON inf_pcs.DevName = inf_devices.E_Name WHERE ( inf_devices.Unused = 0 AND inf_devices.Removed = 0 AND ( inf_pcs.Mac = '%{Calling-Station-ID}' OR inf_pcs.Mac = '%{Calling-Station-ID};' OR inf_pcs.Mac LIKE '%%;%{Calling-Station-ID}%%' ) )}" <= 0) && ("%{sql:SELECT count(Mac) FROM inf_devices WHERE ( Unused = 0 AND Removed = 0 AND ( Mac = '%{Calling-Station-ID}' OR Mac = '%{Calling-Station-ID};' OR Mac LIKE '%%;%{Calling-Station-ID}%%' ) )}" <= 0) ) || (!EAP-Message) -> FALSE (8) else { (8) if ( (User-Name) && (&User-Name =~ /^host\/(\w+)(\.\w+)*$/) ) { (8) if ( (User-Name) && (&User-Name =~ /^host\/(\w+)(\.\w+)*$/) ) -> FALSE (8) else { (8) eap: Peer sent EAP Response (code 2) ID 9 length 43 (8) eap: Continuing tunnel setup (8) [eap] = ok (8) } # else = ok (8) } # else = ok (8) } # policy custom_filter_default = updated (8) [chap] = noop (8) [mschap] = noop (8) suffix: Checking for suffix after "@" (8) suffix: No '@' in User-Name = "DOMAIN\", looking up realm NULL (8) suffix: No such realm "NULL" (8) [suffix] = noop (8) ntdomain: Checking for prefix before "\" (8) ntdomain: Looking up realm "DOMAIN" for User-Name = "DOMAIN\" (8) ntdomain: No such realm "DOMAIN" (8) [ntdomain] = noop (8) eap: Peer sent EAP Response (code 2) ID 9 length 43 (8) eap: Continuing tunnel setup (8) [eap] = ok (8) } # authorize = ok (8) Found Auth-Type = eap (8) Found Auth-Type = eap (8) ERROR: Warning: Found 2 auth-types on request for user 'DOMAIN\' (8) # Executing group from file /etc/raddb/sites-enabled/default (8) authenticate { (8) eap: Expiring EAP session with state 0x241fa4362516be94 (8) eap: Finished EAP session with state 0x34bf2a3233b633c7 (8) eap: Previous EAP request found for state 0x34bf2a3233b633c7, released from the list (8) eap: Peer sent packet with method EAP PEAP (25) (8) eap: Calling submodule eap_peap to process data (8) eap_peap: Continuing EAP-TLS (8) eap_peap: [eaptls verify] = ok (8) eap_peap: Done initial handshake (8) eap_peap: [eaptls process] = ok (8) eap_peap: Session established. Decoding tunneled attributes (8) eap_peap: PEAP state phase2 (8) eap_peap: EAP method MSCHAPv2 (26) (8) eap_peap: Got tunneled request (8) eap_peap: EAP-Message = 0x020900061a03 (8) eap_peap: Setting User-Name to DOMAIN\adminpc (8) eap_peap: Sending tunneled request to inner-tunnel (8) eap_peap: EAP-Message = 0x020900061a03 (8) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (8) eap_peap: User-Name = "DOMAIN\\adminpc" (8) eap_peap: State = 0x241fa4362516be94c32591fd0ea88635 (8) Virtual server inner-tunnel received request (8) EAP-Message = 0x020900061a03 (8) FreeRADIUS-Proxied-To = 127.0.0.1 (8) User-Name = "DOMAIN\\adminpc" (8) State = 0x241fa4362516be94c32591fd0ea88635 (8) WARNING: Outer User-Name is not anonymized. User privacy is compromised. (8) server inner-tunnel { (8) session-state: No cached attributes (8) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel (8) authorize { (8) policy filter_username { (8) if (&User-Name) { (8) if (&User-Name) -> TRUE (8) if (&User-Name) { (8) if (&User-Name =~ / /) { (8) if (&User-Name =~ / /) -> FALSE (8) if (&User-Name =~ /@[^@]*@/ ) { (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (8) if (&User-Name =~ /\.\./ ) { (8) if (&User-Name =~ /\.\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\.$/) { (8) if (&User-Name =~ /\.$/) -> FALSE (8) if (&User-Name =~ /(a)\./) { (8) if (&User-Name =~ /(a)\./) -> FALSE (8) } # if (&User-Name) = notfound (8) } # policy filter_username = notfound (8) policy custom_split_username_nai { (8) if (&User-Name && (&User-Name =~ /^(\w+)(a)(.*)$/)) { (8) if (&User-Name && (&User-Name =~ /^(\w+)(a)(.*)$/)) -> FALSE (8) else { (8) if (&User-Name && (&User-Name =~ /^(.*)\\(\w+)$/)) { (8) if (&User-Name && (&User-Name =~ /^(.*)\\(\w+)$/)) -> TRUE (8) if (&User-Name && (&User-Name =~ /^(.*)\\(\w+)$/)) { (8) update request { (8) EXPAND %{2} (8) --> adminpc (8) &Stripped-User-Name := adminpc (8) EXPAND %{1} (8) --> DOMAIN (8) &Stripped-User-Domain = DOMAIN (8) } # update request = noop (8) [updated] = updated (8) } # if (&User-Name && (&User-Name =~ /^(.*)\\(\w+)$/)) = updated (8) ... skipping else: Preceding "if" was taken (8) } # else = updated (8) } # policy custom_split_username_nai = updated (8) policy custom_filter_inner_tunnel { (8) if ( (User-Name) && (&User-Name =~ /^host\/(\w+)(\.\w+)*$/) ) { (8) if ( (User-Name) && (&User-Name =~ /^host\/(\w+)(\.\w+)*$/) ) -> FALSE (8) } # policy custom_filter_inner_tunnel = updated (8) [chap] = noop (8) [mschap] = noop (8) suffix: Checking for suffix after "@" (8) suffix: No '@' in User-Name = "adminpc", looking up realm NULL (8) suffix: No such realm "NULL" (8) [suffix] = noop (8) update control { (8) &Proxy-To-Realm := LOCAL (8) } # update control = noop (8) eap: Peer sent EAP Response (code 2) ID 9 length 6 (8) eap: No EAP Start, assuming it's an on-going EAP conversation (8) [eap] = updated (8) [files] = noop (8) [expiration] = noop (8) [logintime] = noop (8) [pap] = noop (8) } # authorize = updated (8) Found Auth-Type = eap (8) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (8) authenticate { (8) eap: Expiring EAP session with state 0x241fa4362516be94 (8) eap: Finished EAP session with state 0x241fa4362516be94 (8) eap: Previous EAP request found for state 0x241fa4362516be94, released from the list (8) eap: Peer sent packet with method EAP MSCHAPv2 (26) (8) eap: Calling submodule eap_mschapv2 to process data (8) eap: Sending EAP Success (code 3) ID 9 length 4 (8) eap: Freeing handler (8) [eap] = ok (8) } # authenticate = ok (8) # Executing section post-auth from file /etc/raddb/sites-enabled/inner-tunnel (8) post-auth { (8) if (0) { (8) if (0) -> FALSE (8) } # post-auth = noop (8) } # server inner-tunnel (8) Virtual server sending reply (8) MS-MPPE-Encryption-Policy = Encryption-Required (8) MS-MPPE-Encryption-Types = 4 (8) MS-MPPE-Send-Key = 0x8227912082b737081d5f5086d5276917 (8) MS-MPPE-Recv-Key = 0xbd60f4424280d034ac88ecdd6ab436a2 (8) EAP-Message = 0x03090004 (8) Message-Authenticator = 0x00000000000000000000000000000000 (8) Stripped-User-Name := "adminpc" (8) eap_peap: Got tunneled reply code 2 (8) eap_peap: MS-MPPE-Encryption-Policy = Encryption-Required (8) eap_peap: MS-MPPE-Encryption-Types = 4 (8) eap_peap: MS-MPPE-Send-Key = 0x8227912082b737081d5f5086d5276917 (8) eap_peap: MS-MPPE-Recv-Key = 0xbd60f4424280d034ac88ecdd6ab436a2 (8) eap_peap: EAP-Message = 0x03090004 (8) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (8) eap_peap: Stripped-User-Name := "adminpc" (8) eap_peap: Got tunneled reply RADIUS code 2 (8) eap_peap: MS-MPPE-Encryption-Policy = Encryption-Required (8) eap_peap: MS-MPPE-Encryption-Types = 4 (8) eap_peap: MS-MPPE-Send-Key = 0x8227912082b737081d5f5086d5276917 (8) eap_peap: MS-MPPE-Recv-Key = 0xbd60f4424280d034ac88ecdd6ab436a2 (8) eap_peap: EAP-Message = 0x03090004 (8) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (8) eap_peap: Stripped-User-Name := "adminpc" (8) eap_peap: Tunneled authentication was successful (8) eap_peap: SUCCESS (8) eap: Sending EAP Request (code 1) ID 10 length 43 (8) eap: EAP session adding &reply:State = 0x34bf2a323cb533c7 (8) [eap] = handled (8) } # authenticate = handled (8) Using Post-Auth-Type Challenge (8) # Executing group from file /etc/raddb/sites-enabled/default (8) Challenge { ... } # empty sub-section is ignored (8) Sent Access-Challenge Id 0 from 10.215.144.91:1812 to 10.215.147.140:49154 length 0 (8) EAP-Message = 0x010a002b19001703010020a19ef0fe3f0c9b584992457fab0fda7b39dae61950ac4300f52f48604b1a17d9 (8) Message-Authenticator = 0x00000000000000000000000000000000 (8) State = 0x34bf2a323cb533c79ddc0c2553452e2c (8) Finished request Waking up in 4.9 seconds. (8) Cleaning up request packet ID 0 with timestamp +13 (9) Received Access-Request Id 0 from 10.215.147.140:49154 to 10.215.144.91:1812 length 147 (9) NAS-IP-Address = 10.215.147.140 (9) NAS-Port-Type = Ethernet (9) NAS-Port = 43 (9) User-Name = "DOMAIN\\" (9) State = 0x34bf2a323cb533c79ddc0c2553452e2c (9) Calling-Station-Id = "DC-4A-3E-06-11-46" (9) EAP-Message = 0x020a002b190017030100205d49a7d9fa42ecc07762bda0ce1da33ec437ed7d057f69369055acbb566f2bcc (9) Message-Authenticator = 0x7dcba2a6df10bc84f68031932b88f1e2 (9) session-state: No cached attributes (9) # Executing section authorize from file /etc/raddb/sites-enabled/default (9) authorize { (9) policy filter_username { (9) if (&User-Name) { (9) if (&User-Name) -> TRUE (9) if (&User-Name) { (9) if (&User-Name =~ / /) { (9) if (&User-Name =~ / /) -> FALSE (9) if (&User-Name =~ /@[^@]*@/ ) { (9) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (9) if (&User-Name =~ /\.\./ ) { (9) if (&User-Name =~ /\.\./ ) -> FALSE (9) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (9) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (9) if (&User-Name =~ /\.$/) { (9) if (&User-Name =~ /\.$/) -> FALSE (9) if (&User-Name =~ /(a)\./) { (9) if (&User-Name =~ /(a)\./) -> FALSE (9) } # if (&User-Name) = notfound (9) } # policy filter_username = notfound (9) [preprocess] = ok (9) policy custom_filter_default { (9) policy rewrite_calling_station_id { (9) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (9) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) -> TRUE (9) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (9) update request { (9) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (9) --> DC-4A-3E-06-11-46 (9) &Calling-Station-Id := DC-4A-3E-06-11-46 (9) } # update request = noop (9) [updated] = updated (9) } # if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) = updated (9) ... skipping else: Preceding "if" was taken (9) } # policy rewrite_calling_station_id = updated (9) if ( ("%{sql:SELECT count(inf_pcs.Mac) FROM inf_pcs INNER JOIN inf_devices ON inf_pcs.DevName = inf_devices.E_Name WHERE ( inf_devices.Unused = 0 AND inf_devices.Removed = 0 AND ( inf_pcs.Mac = '%{Calling-Station-ID}' OR inf_pcs.Mac = '%{Calling-Station-ID};' OR inf_pcs.Mac LIKE '%%;%{Calling-Station-ID}%%' ) )}" <= 0) && ("%{sql:SELECT count(Mac) FROM inf_devices WHERE ( Unused = 0 AND Removed = 0 AND ( Mac = '%{Calling-Station-ID}' OR Mac = '%{Calling-Station-ID};' OR Mac LIKE '%%;%{Calling-Station-ID}%%' ) )}" <= 0) ) || (!EAP-Message) { rlm_sql (sql): Reserved connection (3) (9) Executing select query: SELECT count(inf_pcs.Mac) FROM inf_pcs INNER JOIN inf_devices ON inf_pcs.DevName = inf_devices.E_Name WHERE ( inf_devices.Unused = 0 AND inf_devices.Removed = 0 AND ( inf_pcs.Mac = 'DC-4A-3E-06-11-46' OR inf_pcs.Mac = 'DC-4A-3E-06-11-46;' OR inf_pcs.Mac LIKE '%;DC-4A-3E-06-11-46%' ) ) rlm_sql (sql): Released connection (3) (9) EXPAND %{sql:SELECT count(inf_pcs.Mac) FROM inf_pcs INNER JOIN inf_devices ON inf_pcs.DevName = inf_devices.E_Name WHERE ( inf_devices.Unused = 0 AND inf_devices.Removed = 0 AND ( inf_pcs.Mac = '%{Calling-Station-ID}' OR inf_pcs.Mac = '%{Calling-Station-ID};' OR inf_pcs.Mac LIKE '%%;%{Calling-Station-ID}%%' ) )} (9) --> 1 (9) if ( ("%{sql:SELECT count(inf_pcs.Mac) FROM inf_pcs INNER JOIN inf_devices ON inf_pcs.DevName = inf_devices.E_Name WHERE ( inf_devices.Unused = 0 AND inf_devices.Removed = 0 AND ( inf_pcs.Mac = '%{Calling-Station-ID}' OR inf_pcs.Mac = '%{Calling-Station-ID};' OR inf_pcs.Mac LIKE '%%;%{Calling-Station-ID}%%' ) )}" <= 0) && ("%{sql:SELECT count(Mac) FROM inf_devices WHERE ( Unused = 0 AND Removed = 0 AND ( Mac = '%{Calling-Station-ID}' OR Mac = '%{Calling-Station-ID};' OR Mac LIKE '%%;%{Calling-Station-ID}%%' ) )}" <= 0) ) || (!EAP-Message) -> FALSE (9) else { (9) if ( (User-Name) && (&User-Name =~ /^host\/(\w+)(\.\w+)*$/) ) { (9) if ( (User-Name) && (&User-Name =~ /^host\/(\w+)(\.\w+)*$/) ) -> FALSE (9) else { (9) eap: Peer sent EAP Response (code 2) ID 10 length 43 (9) eap: Continuing tunnel setup (9) [eap] = ok (9) } # else = ok (9) } # else = ok (9) } # policy custom_filter_default = updated (9) [chap] = noop (9) [mschap] = noop (9) suffix: Checking for suffix after "@" (9) suffix: No '@' in User-Name = "DOMAIN\", looking up realm NULL (9) suffix: No such realm "NULL" (9) [suffix] = noop (9) ntdomain: Checking for prefix before "\" (9) ntdomain: Looking up realm "DOMAIN" for User-Name = "DOMAIN\" (9) ntdomain: No such realm "DOMAIN" (9) [ntdomain] = noop (9) eap: Peer sent EAP Response (code 2) ID 10 length 43 (9) eap: Continuing tunnel setup (9) [eap] = ok (9) } # authorize = ok (9) Found Auth-Type = eap (9) Found Auth-Type = eap (9) ERROR: Warning: Found 2 auth-types on request for user 'DOMAIN\' (9) # Executing group from file /etc/raddb/sites-enabled/default (9) authenticate { (9) eap: Expiring EAP session with state 0x34bf2a323cb533c7 (9) eap: Finished EAP session with state 0x34bf2a323cb533c7 (9) eap: Previous EAP request found for state 0x34bf2a323cb533c7, released from the list (9) eap: Peer sent packet with method EAP PEAP (25) (9) eap: Calling submodule eap_peap to process data (9) eap_peap: Continuing EAP-TLS (9) eap_peap: [eaptls verify] = ok (9) eap_peap: Done initial handshake (9) eap_peap: [eaptls process] = ok (9) eap_peap: Session established. Decoding tunneled attributes (9) eap_peap: PEAP state send tlv success (9) eap_peap: Received EAP-TLV response (9) eap_peap: Client rejected our response. The password is probably incorrect (9) eap_peap: ERROR: We sent a success, but the client did not agree (9) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module failed (9) eap: Sending EAP Failure (code 4) ID 10 length 4 (9) eap: Failed in EAP select (9) [eap] = invalid (9) } # authenticate = invalid (9) Failed to authenticate the user (9) Using Post-Auth-Type Reject (9) # Executing group from file /etc/raddb/sites-enabled/default (9) Post-Auth-Type REJECT { (9) attr_filter.access_reject: EXPAND %{User-Name} (9) attr_filter.access_reject: --> DOMAIN\\ (9) attr_filter.access_reject: Matched entry DEFAULT at line 11 (9) [attr_filter.access_reject] = updated (9) [eap] = noop (9) policy remove_reply_message_if_eap { (9) if (&reply:EAP-Message && &reply:Reply-Message) { (9) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (9) else { (9) [noop] = noop (9) } # else = noop (9) } # policy remove_reply_message_if_eap = noop (9) } # Post-Auth-Type REJECT = updated (9) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (9) Sending delayed response (9) Sent Access-Reject Id 0 from 10.215.144.91:1812 to 10.215.147.140:49154 length 44 (9) EAP-Message = 0x040a0004 (9) Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.9 seconds. (9) Cleaning up request packet ID 0 with timestamp +14 Ready to process requests Any ideas why the client is rejecting? Thanks, Vieri

5 18

freeradius + redis database
by Bassem Mettichi 16 Dec '17

16 Dec '17

Hello, has someone used freeradius + redis database, could you share the configuration steps ? is there an authentication module please help please. Best Regards Mettichi Bassem

2 2

Nas-IP-Address regexp matching in hints/huntgroups working in 2.2.0 and not in 3.0.13
by Gianni Costanzi 15 Dec '17

15 Dec '17

Hi, I'm configuring a Freeradius 3.0.13 server and I'm testing the configuration we have on a 2.2.0 Freeradius. On our 2.2.0 we've implemented some entries like the following one within the hints file: DEFAULT User-Name =~ "^(xx[e0][0-9]{3})$", NAS-IP-Address !~ "10\.10\.1\.11[89]$", NAS-IP-Address !~ "10\.10\.2\.(10|20)$" User-Name := "%{User-Name}@imp" (If you are wondering why we have multiple "NAS-IP-Address !~" on a single line is because we've reached the maximum length for the string passed to !~ and so we've split the string in multiple "NAS-IP-Address !~" blocks) The behavior we've implemented is: if username matches the regexp and NAS-IP-Address does not match any of the regexps on the same line, then add a realm to the username. The above configuration does not give any error but it does not work on 3.0.13. The same happens with huntgroups where regexp matching on NAS-IP-Address like the following one does not work anymore: brocade-fos NAS-IP-Address =~ "10\.10\.[18]8\.2[34]$" I've noticed that regexp matching within hints file works on User-Name, in fact the following cfg works and matches an access from user xx0123 when NAS-IP-Address is different from 10.10.1.118 and 10.10.1.254: DEFAULT User-Name =~ "^(fc[e0][0-9]{3})$", NAS-IP-Address != "10.10.1.118", NAS-IP-Address != "10.10.1.254" This solution is really much more verbose, because without regexp matching I would need to add tens of "NAS-IP-Address != x.x.x.x" entries (I don't know if there is a limit to their number) instead of using regexp to make the whole thing more compact. So my questions are: 1) should regexp matching work within hints and huntgroups file for NAS-IP-Address in 3.0.13 as it worked in 2.2.0? 2) if they do not work anymore, how should I implement "if you are user XXXX (with regexp) and the NAS-IP-Address is not one of the listed ones, then do User-Name manipulation? Best regards, Gianni Costanzi

3 10

freeradius 3.0.15 not tarting if one LDAP server not reachable
by Enno Gröper 15 Dec '17

15 Dec '17

Hi, We are running freeradius with authentication against several LDAP clusters (2-node): Example config: Auth-Type LDAP_CMS { redundant-load-balance { # between ldap servers ldap_cms1 ldap_cms2 } } If one of those ldap servers (i.e. ldap_cms2) can't be reached (temporary failure, maintenance, ...), freeradius won't start: Thu Dec 14 21:05:31 2017 : Error: rlm_ldap (ldap_cms2): Could not start TLS: Can't contact LDAP server Thu Dec 14 21:05:31 2017 : Error: rlm_ldap (ldap_cms2): Opening connection failed (0) Thu Dec 14 21:05:31 2017 : Error: /usr2/freeradius/etc/raddb/mods-enabled/ldap[844]: Instantiation failed for module "ldap_cms2" Thu Dec 14 21:05:36 2017 : Info: Debugger not attached Are there any ideas how to work around this problem? Looking at the code rlm_ldap instantiation would fail, if there is any problem. If freeradius is already running, there is no problem with a failing ldap server. But a freeradius restart in such a situation means a full service failure (even if only one of 8 ldap servers is down). @devs: Do you think error handling could be extended here to distinguish between temporary and permanent (configuration) errors? Or would this add too much complexity? I assume, this would be a too complex change for 3.x. At this point in time we don't know, that there will be a redundant config for this authentication source. Should I open a bug for this? Kind regards, Enno

3 2

Re: plat fie for accounting start
by Bassem Mettichi 15 Dec '17

15 Dec '17

Hello, please could someone help me. iam using actually freeradius 3.0.15 with mariadb server but we have an issue of performance so we have decided to use plat files instead of database, help me how to create a file and to store users Inside this file, when the nas send and accounting start the user info must be stored in this file please help. Best Regards Mettichi Bassem 2017-12-15 11:56 GMT+01:00 Bassem Mettichi <mettichi(a)gmail.com>: > Hello, > > please could someone help me. > iam using actually freeradius 3.0.15 with mariadb server but we have an > issue of performance > so we have decided to use plat files instead of database, help me how to > create a file and to store users Inside this file, when the nas send and > accounting start the user info must be stored in this file please help. > > > Best Regards > Mettichi Bassem >

2 2