- Freeradius-Users - lists.freeradius.org

[ANN] EAP-AKA' and FreeRADIUS as an AuC in v4.0.x
by Arran Cudbard-Bell 12 Dec '17

12 Dec '17

EAP-AKA' is now available in FreeRADIUS v4.0.x HEAD. All optional components are supported except fast re-authentication which'll be added soon. In addition to EAP-AKA' FreeRADIUS can now perform the duties of an AuC, generating AKA quintuplets and SIM triplets using a subscriber key (Ki) and a derived operator code (OPc). The AuC SIM algorithms available for EAP-SIM are: - COMP128v1 - COMP128v2 - COMP128v3 - COMP128v4 (Milenage) The AuC SIM algorithms available for EAP-AKA are: - Milenage In most cases this functionality should only be used for testing, and the rlm_sigtran module, rlm_rest module or a diameter proxy should be used to acquire triplets or quintuplets. If anyone knows of any other extensions to EAP-SIM, EAP-AKA or EAP-AKA['], or additional SIM algorithms they'd like implemented, let me know and i'll see if I can add them in. -Arran Arran Cudbard-Bell <a.cudbardb(a)freeradius.org> FreeRADIUS Development Team FD31 3077 42EC 7FCD 32FE 5EE2 56CF 27F9 30A8 CAA2

1 1

SQL query with unixodbc and freetds
by Vieri 12 Dec '17

12 Dec '17

Hi, I'm a bit confused as how I should configure an SQL unixodbc/freetds instance to do some custom queries. I do NOT require to set up the full radius schema. My goal is quite simple. Instead of looking up a MAC address in a plain text file, I'd like to look it up in a database. Currently, I'm using a "usersfile" with a list of MAC addresses. I check it in the "authorize" section. How do I do the same, but with a DB lookup? I'd like to use something like: if ("%{sql:SELECT count(*) FROM MACTABLE WHERE MAC = '%{1}'}" > 0) {... I also extract the host name from some messages, and do similar lookups such as: if ("%{sql:SELECT count(*) FROM HOSTTABLE WHERE HOST = '%{1}' AND DOMAN = '%{2}'}" > 0) {... I don't know if I need to configure mods-available/sql and how. I found this in my system: /usr/lib64/rlm_sql_unixodbc.so Guides such as the one at http://wiki.freeradius.org/guide/SQL-HOWTO-for-freeradius-3.x-on-Debian-Ubu… seem to be overkill in my case. I don't need to load a full radius schema. I just need to do a simple DB lookup. Also, I haven't found a unixODBC example yet. Thanks, Vieri

3 5

RV: winbindd_priv dont exist
by Carlos Bordon 12 Dec '17

12 Dec '17

interesting, you known some guide for do it? its posible do it on a domain controller with samba? ________________________________ De: Freeradius-Users <freeradius-users-bounces+cgermanb=live.com.ar(a)lists.freeradius.org> en nombre de Alan Buxey <alan.buxey(a)gmail.com> Enviado: lunes, 11 de diciembre de 2017 04:11 p.m. Para: FreeRadius users mailing list Asunto: Re: winbindd_priv dont exist You can add the user your server runs as to the wbpriv group. Otherwise change the winbind_privileged folder to be readable by the user/group that freeradius runs as (which will get reset each time you patch samba). Anyway, run latest 3.0.x release and use winbind natively instead! 2017 is the year when ntlm_auth for freeradius becomes history! :) alan On 11 Dec 2017 5:35 pm, "Carlos Bordon" <cgermanb(a)live.com.ar> wrote: > > hi people, i doing my server number 50 with freeradius, always fails. > > in this case, i have configurate ntlm but when configure mschap i have > error: > > Exec output: Reading winbind reply failed! (0xc0000001) > Exec plaintext: Reading winbind reply failed! (0xc0000001) > > searching a solution, search the group but dont exist, i have the group > freerad. > > i make chown to the folder winbindd_privileged and add the group freerad > but nothing happend. > > what can i do? > > Regards > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/ FreeRADIUS<http://www.freeradius.org/> www.freeradius.org The world's leading RADIUS server. The project includes a GPL AAA server, BSD licensed client and PAM and Apache modules. Full support is available from NetworkRADIUS. > list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html Support & Services<http://www.freeradius.org/list/users.html> www.freeradius.org The world's leading RADIUS server. The project includes a GPL AAA server, BSD licensed client and PAM and Apache modules. Full support is available from NetworkRADIUS.

3 6

Using Rsyslog with FReeradius
by Peter Hutchison 12 Dec '17

12 Dec '17

We are currently testin Freeradius 3.0.15 on Ubuntu 16.04 servers. Accounting logging is enabled for Interim-Updates from our Wireless Aps and we are sending accounting information direct to our Palo Alto firewall test box via syslog on port 514 (UDP). This is to collect username and IP address of users logging into our wireless network. This is working fine. We have noticed via Nagios and top command that the freeradius service is using 99%+ CPU Load for long periods. Is there anything we can do to the configuration to reduce the load on the server? Peter Hutchison MCP Senior Network Systems Specialist * 01484 473716 Networks Team University of Huddersfield | Queensgate | Huddersfield | HD1 3DH University of Huddersfield inspiring tomorrow's professionals. [http://marketing.hud.ac.uk/_HOSTED/EmailSig2014/EmailSigFooter.jpg] This transmission is confidential and may be legally privileged. If you receive it in error, please notify us immediately by e-mail and remove it from your system. If the content of this e-mail does not relate to the business of the University of Huddersfield, then we do not endorse it and will accept no liability.

3 2

FreeIPA user sync to online services?
by Dagan McGregor 11 Dec '17

11 Dec '17

Hi all, My work is taking another look at options to enable user management with a number of third party online services. Primarily to use with AWS, Github, and Datadog. I have been looking at options such as the new AWS SSO product, OneLogin, Okta, etc Is anyone using FreeIPA with one of these types of services? Is there any safe recommended method for configuring an external facing read-only replica/user account to connect to online services? We can look at installing another on-premise app to handle the integration if required, but I am hoping we can connect FreeIPA to one of these services directly. Any help would be appreciated. Cheers, Dagan McGregor

2 2

vAAA Dimesnioning
by Nader Zaki 10 Dec '17

10 Dec '17

Dears, How do you do ? I appreciate your urgent support regarding vAAA dimensioning, now I have a 800 transactions/sec from P-GW to vAAA so I want to deploy this vAAA using freeradius v.3.0.15 so: 1. How many VMs do I need for the vAAA ? 2. What are the VM requirements needed: CPU, storage and RAM for each VM ? 3. What is the CPU to be used ? Waiting for your prompt response. Best Regards, Nader Nassef Zaki Raya IT Team Leader of Presales of Networks CCIE R&S #43195 Mobile: +201224708428 E-mail: nader_zaki(a)rayacorp.com<mailto:nader_zaki@rayacorp.com> Website: www.raya-it.net<http://www.raya-it.net> Disclaimer: NOTICE, The information contained in this message is confidential and is intended for the addressee(s) only. If you have received this message in error or there are any problems please notify the originator immediately. The unauthorized use, disclosure, copying or alteration of this message is strictly forbidden. Raya will not be liable for direct, special, indirect or consequential damages arising from alteration of the contents of this message by a third party or as a result of any malicious code or virus being passed on. Views expressed in this communication are not necessarily those of Raya.If you have received this message in error, please notify the sender immediately by email, facsimile or telephone and return and/or destroy the original message.

2 1

EAP-FAST is failing on FreeRadius3
by Smita Selot 08 Dec '17

08 Dec '17

I am running FreeRadius3.0.15 on ubuntu16.04 and testing EAP-FAST right now. I made these modifications: - uncommented section “fast” in mods-available/eap file: - cipher_list = “ALL:!EXPORT:!eNULL:!SSLv2” - disable_tlsv1_2 = yes Is there something else that I need to configure? The wireshark captures show “Ignored Unknown Record” error at the time of TLS Accept. FreeRadius debugs also show some error in TLS Accept. What am I missing? This is the debug output of “freeradius -X”: root@freeradius:/etc/freeradius# freeradius -X FreeRADIUS Version 3.0.15 Copyright (C) 1999-2017 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/dictionary including configuration file /etc/freeradius/radiusd.conf including configuration file /etc/freeradius/clients.conf including files in directory /etc/freeradius/mods-enabled/ including configuration file /etc/freeradius/mods-enabled/chap including configuration file /etc/freeradius/mods-enabled/preprocess including configuration file /etc/freeradius/mods-enabled/logintime including configuration file /etc/freeradius/mods-enabled/ntlm_auth including configuration file /etc/freeradius/mods-enabled/digest including configuration file /etc/freeradius/mods-enabled/expr including configuration file /etc/freeradius/mods-enabled/pap including configuration file /etc/freeradius/mods-enabled/replicate including configuration file /etc/freeradius/mods-enabled/date including configuration file /etc/freeradius/mods-enabled/radutmp including configuration file /etc/freeradius/mods-enabled/always including configuration file /etc/freeradius/mods-enabled/realm including configuration file /etc/freeradius/mods-enabled/dynamic_clients including configuration file /etc/freeradius/mods-enabled/utf8 including configuration file /etc/freeradius/mods-enabled/sradutmp including configuration file /etc/freeradius/mods-enabled/linelog including configuration file /etc/freeradius/mods-enabled/unpack including configuration file /etc/freeradius/mods-enabled/detail.log including configuration file /etc/freeradius/mods-enabled/detail including configuration file /etc/freeradius/mods-enabled/exec including configuration file /etc/freeradius/mods-enabled/files including configuration file /etc/freeradius/mods-enabled/soh including configuration file /etc/freeradius/mods-enabled/eap including configuration file /etc/freeradius/mods-enabled/cache_eap including configuration file /etc/freeradius/mods-enabled/unix including configuration file /etc/freeradius/mods-enabled/expiration including configuration file /etc/freeradius/mods-enabled/mschap including configuration file /etc/freeradius/mods-enabled/echo including configuration file /etc/freeradius/mods-enabled/passwd including configuration file /etc/freeradius/mods-enabled/attr_filter including files in directory /etc/freeradius/policy.d/ including configuration file /etc/freeradius/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/policy.d/dhcp including configuration file /etc/freeradius/policy.d/filter including configuration file /etc/freeradius/policy.d/accounting including configuration file /etc/freeradius/policy.d/cui including configuration file /etc/freeradius/policy.d/control including configuration file /etc/freeradius/policy.d/canonicalization including configuration file /etc/freeradius/policy.d/abfab-tr including configuration file /etc/freeradius/policy.d/debug including configuration file /etc/freeradius/policy.d/eap including configuration file /etc/freeradius/policy.d/operator-name including files in directory /etc/freeradius/sites-enabled/ including configuration file /etc/freeradius/sites-enabled/inner-tunnel including configuration file /etc/freeradius/sites-enabled/default main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = no log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### radiusd: #### Loading Clients #### client localhost { ipaddr = 192.168.1.1 ipv4addr = 192.168.1.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client private-network-2 { ipaddr = 192.168.1.0/24 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = mschap # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Auth-Type = digest radiusd: #### Instantiating modules #### modules { # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/mods-enabled/chap # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_exec # Loading module "ntlm_auth" from file /etc/freeradius/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/mods-enabled/digest # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/mods-enabled/replicate # Loaded module rlm_date # Loading module "date" from file /etc/freeradius/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" utc = no } # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/freeradius/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/mods-enabled/dynamic_clients # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/mods-enabled/utf8 # Loading module "sradutmp" from file /etc/freeradius/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/mods-enabled/unpack # Loaded module rlm_detail # Loading module "auth_log" from file /etc/freeradius/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "detail" from file /etc/freeradius/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "exec" from file /etc/freeradius/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/mods-enabled/files files { filename = "/etc/freeradius/mods-config/files/authorize" acctusersfile = "/etc/freeradius/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/mods-config/files/pre-proxy" } # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/mods-enabled/expiration # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loading module "echo" from file /etc/freeradius/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } instantiate { } # Instantiating module "preprocess" from file /etc/freeradius/mods-enabled/preprocess reading pairlist file /etc/freeradius/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/mods-config/preprocess/hints # Instantiating module "logintime" from file /etc/freeradius/mods-enabled/logintime # Instantiating module "pap" from file /etc/freeradius/mods-enabled/pap # Instantiating module "reject" from file /etc/freeradius/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/mods-enabled/always # Instantiating module "IPASS" from file /etc/freeradius/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/mods-enabled/realm # Instantiating module "linelog" from file /etc/freeradius/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/mods-enabled/linelog # Instantiating module "auth_log" from file /etc/freeradius/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log # Instantiating module "detail" from file /etc/freeradius/mods-enabled/detail # Instantiating module "files" from file /etc/freeradius/mods-enabled/files reading pairlist file /etc/freeradius/mods-config/files/authorize reading pairlist file /etc/freeradius/mods-config/files/accounting reading pairlist file /etc/freeradius/mods-config/files/pre-proxy # Instantiating module "eap" from file /etc/freeradius/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/certs" pem_file_type = yes private_key_file = "/etc/freeradius/certs/server_key.pem" certificate_file = "/etc/freeradius/certs/server.pem" ca_file = "/etc/freeradius/certs/root.pem" private_key_password = <<< secret >>> dh_file = "/etc/freeradius/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "ALL:!EXPORT:!eNULL:!SSLv2" cipher_server_preference = no ecdh_curve = "prime256v1" disable_tlsv1_2 = yes cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Linked to sub-module rlm_eap_fast fast { tls = "tls-common" default_eap_type = "mschapv2" virtual_server = "inner-tunnel" require_client_cert = no pac_lifetime = 604800 authority_identity = "1234" pac_opaque_key = "0123456789abcdef0123456789ABCDEF" copy_request_to_tunnel = no use_tunneled_reply = no } tls: Using cached TLS configuration from previous invocation # Instantiating module "cache_eap" from file /etc/freeradius/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "expiration" from file /etc/freeradius/mods-enabled/expiration # Instantiating module "mschap" from file /etc/freeradius/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/access_reject [/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/accounting_response } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/radiusd.conf } # server server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading session {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/sites-enabled/inner-tunnel:331 } # server inner-tunnel server default { # from file /etc/freeradius/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading post-auth {...} } # server default radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } listen { type = "auth" ipaddr = 192.168.1.1 port = 1812 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = 192.168.1.1 port = 1813 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on auth interface ens192 address 192.168.1.1 port 1812 bound to server default Listening on acct interface ens192 address 192.168.1.1 port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Ready to process requests (0) Received Access-Request Id 255 from 192.168.1.2:1812 to 192.168.1.1:1812 length 114 (0) NAS-IP-Address = 192.168.0.1 (0) NAS-Port-Type = Async (0) User-Name = "IxiaUser3" (0) Calling-Station-Id = ".\202\020M" (0) Service-Type = Framed-User (0) Framed-MTU = 1500 (0) Calling-Station-Id = "2e-82-10-4d-00-00" (0) EAP-Message = 0x0200000e01497869615573657233 (0) Message-Authenticator = 0x7fdb3b59fe75cf65d1d5c79ad1e3f46a (0) # Executing section authorize from file /etc/freeradius/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "IxiaUser3", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 0 length 14 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/freeradius/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_md5 to process data (0) eap_md5: Issuing MD5 Challenge (0) eap: Sending EAP Request (code 1) ID 1 length 22 (0) eap: EAP session adding &reply:State = 0xdd0d245add0c2020 (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) # Executing group from file /etc/freeradius/sites-enabled/default (0) Challenge { ... } # empty sub-section is ignored (0) Sent Access-Challenge Id 255 from 192.168.1.1:1812 to 192.168.1.2:1812 length 0 (0) EAP-Message = 0x0101001604108fca0edf309d3511fd66836528124b33 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0xdd0d245add0c2020721e27c81496baf3 (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 0 from 192.168.1.2:1812 to 192.168.1.1:1812 length 124 (1) NAS-IP-Address = 192.168.0.1 (1) NAS-Port-Type = Async (1) User-Name = "IxiaUser3" (1) Calling-Station-Id = ".\202\020M" (1) Service-Type = Framed-User (1) Framed-MTU = 1500 (1) Calling-Station-Id = "2e-82-10-4d-00-00" (1) State = 0xdd0d245add0c2020721e27c81496baf3 (1) EAP-Message = 0x02010006032b (1) Message-Authenticator = 0x73a2f7f3974f309e69a04dcf0ff2809a (1) session-state: No cached attributes (1) # Executing section authorize from file /etc/freeradius/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /(a)\./) { (1) if (&User-Name =~ /(a)\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "IxiaUser3", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 1 length 6 (1) eap: No EAP Start, assuming it's an on-going EAP conversation (1) [eap] = updated (1) files: users: Matched entry IxiaUser3 at line 89 (1) [files] = ok (1) [expiration] = noop (1) [logintime] = noop (1) pap: WARNING: Auth-Type already set. Not setting to PAP (1) [pap] = noop (1) } # authorize = updated (1) Found Auth-Type = eap (1) # Executing group from file /etc/freeradius/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0xdd0d245add0c2020 (1) eap: Finished EAP session with state 0xdd0d245add0c2020 (1) eap: Previous EAP request found for state 0xdd0d245add0c2020, released from the list (1) eap: Peer sent packet with method EAP NAK (3) (1) eap: Found mutually acceptable type FAST (43) (1) eap: Calling submodule eap_fast to process data (1) eap_fast: Initiating new EAP-TLS session (1) eap: Sending EAP Request (code 1) ID 2 length 26 (1) eap: EAP session adding &reply:State = 0xdd0d245adc0f0f20 (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) # Executing group from file /etc/freeradius/sites-enabled/default (1) Challenge { ... } # empty sub-section is ignored (1) Sent Access-Challenge Id 0 from 192.168.1.1:1812 to 192.168.1.2:1812 length 0 (1) EAP-Message = 0x0102001a2b210004001081dc9bdb52d04dc20036dbd8313ed055 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0xdd0d245adc0f0f20721e27c81496baf3 (1) Finished request Waking up in 4.9 seconds. (2) Received Access-Request Id 1 from 192.168.1.2:1812 to 192.168.1.1:1812 length 178 (2) NAS-IP-Address = 192.168.0.1 (2) NAS-Port-Type = Async (2) User-Name = "IxiaUser3" (2) Calling-Station-Id = ".\202\020M" (2) Service-Type = Framed-User (2) Framed-MTU = 1500 (2) Calling-Station-Id = "2e-82-10-4d-00-00" (2) State = 0xdd0d245adc0f0f20721e27c81496baf3 (2) EAP-Message = 0x0202003c2b8100000032160301002d0100002903015a2a50e21ca24ff0d76bd4797275d30da30bd73fc71845d9f9b3ef04db0d072b00000200340100 (2) Message-Authenticator = 0x084bf09eb3d9ad062f855cebf35bf593 (2) session-state: No cached attributes (2) # Executing section authorize from file /etc/freeradius/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /(a)\./) { (2) if (&User-Name =~ /(a)\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "IxiaUser3", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 2 length 60 (2) eap: No EAP Start, assuming it's an on-going EAP conversation (2) [eap] = updated (2) files: users: Matched entry IxiaUser3 at line 89 (2) [files] = ok (2) [expiration] = noop (2) [logintime] = noop (2) pap: WARNING: Auth-Type already set. Not setting to PAP (2) [pap] = noop (2) } # authorize = updated (2) Found Auth-Type = eap (2) # Executing group from file /etc/freeradius/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0xdd0d245adc0f0f20 (2) eap: Finished EAP session with state 0xdd0d245adc0f0f20 (2) eap: Previous EAP request found for state 0xdd0d245adc0f0f20, released from the list (2) eap: Peer sent packet with method EAP FAST (43) (2) eap: Calling submodule eap_fast to process data (2) eap_fast: Authenticate (2) eap_fast: Continuing EAP-TLS (2) eap_fast: Peer indicated complete TLS record size will be 50 bytes (2) eap_fast: Got complete TLS record (50 bytes) (2) eap_fast: [eaptls verify] = length included (2) eap_fast: (other): before/accept initialization (2) eap_fast: TLS_accept: before/accept initialization (2) eap_fast: <<< recv TLS 1.0 Handshake [length 002d], ClientHello (2) eap_fast: TLS_accept: unknown state (2) eap_fast: >>> send TLS 1.0 Handshake [length 002a], ServerHello (2) eap_fast: TLS_accept: unknown state (2) eap_fast: >>> send TLS 1.0 Handshake [length 020b], ServerKeyExchange (2) eap_fast: TLS_accept: unknown state (2) eap_fast: >>> send TLS 1.0 Handshake [length 0004], ServerHelloDone (2) eap_fast: TLS_accept: unknown state (2) eap_fast: TLS_accept: unknown state (2) eap_fast: TLS_accept: unknown state (2) eap_fast: TLS_accept: Need to read more data: unknown state (2) eap_fast: TLS_accept: Need to read more data: unknown state (2) eap_fast: In SSL Handshake Phase (2) eap_fast: In SSL Accept mode (2) eap_fast: [eaptls process] = handled (2) eap: Sending EAP Request (code 1) ID 3 length 590 (2) eap: EAP session adding &reply:State = 0xdd0d245adf0e0f20 (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) # Executing group from file /etc/freeradius/sites-enabled/default (2) Challenge { ... } # empty sub-section is ignored (2) Sent Access-Challenge Id 1 from 192.168.1.1:1812 to 192.168.1.2:1812 length 0 (2) EAP-Message = 0x0103024e2b01160301002a020000260301733ef47a8e4abf22d269b19a0a31134841f40b49414848749c4decbb906cdd0c00003400160301020b0c0002070100a39e474988d732613b368e70b3cdc8b93e615ee5309ecc8d0861f9d5084928fa2f1c136c9c3ab7a8c8eda8c3ff38dbef2fe06448badd95 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0xdd0d245adf0e0f20721e27c81496baf3 (2) Finished request Waking up in 4.9 seconds. (3) Received Access-Request Id 2 from 192.168.1.2:1812 to 192.168.1.1:1812 length 456 (3) NAS-IP-Address = 192.168.0.1 (3) NAS-Port-Type = Async (3) User-Name = "IxiaUser3" (3) Calling-Station-Id = ".\202\020M" (3) Service-Type = Framed-User (3) Framed-MTU = 1500 (3) Calling-Station-Id = "2e-82-10-4d-00-00" (3) State = 0xdd0d245adf0e0f20721e27c81496baf3 (3) EAP-Message = 0x020301502b810000014616030101061000010201004dde4e9f458676da37848cf8f321d9839dba56148319f02dfe9a953a69a6bfcef3176bb1e3da06e880291ecfab2b8bd6b6d7e577576c5a6d12abc7688f35634a5adbf58767e10614c49a9c8c2d5e7b0f1baaed7037e853eaee71af227e0c03d50d08 (3) Message-Authenticator = 0x5d0ab3c786fd441d182fe0460da770d1 (3) session-state: No cached attributes (3) # Executing section authorize from file /etc/freeradius/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /(a)\./) { (3) if (&User-Name =~ /(a)\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "IxiaUser3", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 3 length 336 (3) eap: No EAP Start, assuming it's an on-going EAP conversation (3) [eap] = updated (3) files: users: Matched entry IxiaUser3 at line 89 (3) [files] = ok (3) [expiration] = noop (3) [logintime] = noop (3) pap: WARNING: Auth-Type already set. Not setting to PAP (3) [pap] = noop (3) } # authorize = updated (3) Found Auth-Type = eap (3) # Executing group from file /etc/freeradius/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0xdd0d245adf0e0f20 (3) eap: Finished EAP session with state 0xdd0d245adf0e0f20 (3) eap: Previous EAP request found for state 0xdd0d245adf0e0f20, released from the list (3) eap: Peer sent packet with method EAP FAST (43) (3) eap: Calling submodule eap_fast to process data (3) eap_fast: Authenticate (3) eap_fast: Continuing EAP-TLS (3) eap_fast: Peer indicated complete TLS record size will be 326 bytes (3) eap_fast: Got complete TLS record (326 bytes) (3) eap_fast: [eaptls verify] = length included (3) eap_fast: <<< recv TLS 1.0 Handshake [length 0106], ClientKeyExchange (3) eap_fast: TLS_accept: unknown state (3) eap_fast: TLS_accept: unknown state (3) eap_fast: <<< recv TLS 1.0 ChangeCipherSpec [length 0001] (3) eap_fast: <<< recv TLS 1.0 Handshake [length 0010], Finished (3) eap_fast: TLS_accept: unknown state (3) eap_fast: >>> send TLS 1.0 ChangeCipherSpec [length 0001] (3) eap_fast: TLS_accept: unknown state (3) eap_fast: >>> send TLS 1.0 Handshake [length 0010], Finished (3) eap_fast: TLS_accept: unknown state (3) eap_fast: TLS_accept: unknown state (3) eap_fast: (other): SSL negotiation finished successfully (3) eap_fast: SSL Connection Established (3) eap_fast: [eaptls process] = handled (3) eap: Sending EAP Request (code 1) ID 4 length 65 (3) eap: EAP session adding &reply:State = 0xdd0d245ade090f20 (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) # Executing group from file /etc/freeradius/sites-enabled/default (3) Challenge { ... } # empty sub-section is ignored (3) Sent Access-Challenge Id 2 from 192.168.1.1:1812 to 192.168.1.2:1812 length 0 (3) EAP-Message = 0x010400412b0114030100010116030100309e405ff7042b4da18713df473f4b72437b3f992946d1a633e026e7357ebce99be3318992d34a36942c5d7e2c3b286be7 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0xdd0d245ade090f20721e27c81496baf3 (3) Finished request Waking up in 0.9 seconds. (4) Received Access-Request Id 3 from 192.168.1.2:1812 to 192.168.1.1:1812 length 124 (4) NAS-IP-Address = 192.168.0.1 (4) NAS-Port-Type = Async (4) User-Name = "IxiaUser3" (4) Calling-Station-Id = ".\202\020M" (4) Service-Type = Framed-User (4) Framed-MTU = 1500 (4) Calling-Station-Id = "2e-82-10-4d-00-00" (4) State = 0xdd0d245ade090f20721e27c81496baf3 (4) EAP-Message = 0x020400062b01 (4) Message-Authenticator = 0xd1e19172544e3174542eab2dd5f264b7 (4) session-state: No cached attributes (4) # Executing section authorize from file /etc/freeradius/sites-enabled/default (4) authorize { (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /(a)\./) { (4) if (&User-Name =~ /(a)\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "IxiaUser3", looking up realm NULL (4) suffix: No such realm "NULL" (4) [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 4 length 6 (4) eap: No EAP Start, assuming it's an on-going EAP conversation (4) [eap] = updated (4) files: users: Matched entry IxiaUser3 at line 89 (4) [files] = ok (4) [expiration] = noop (4) [logintime] = noop (4) pap: WARNING: Auth-Type already set. Not setting to PAP (4) [pap] = noop (4) } # authorize = updated (4) Found Auth-Type = eap (4) # Executing group from file /etc/freeradius/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0xdd0d245ade090f20 (4) eap: Finished EAP session with state 0xdd0d245ade090f20 (4) eap: Previous EAP request found for state 0xdd0d245ade090f20, released from the list (4) eap: Peer sent packet with method EAP FAST (43) (4) eap: Calling submodule eap_fast to process data (4) eap_fast: Authenticate (4) eap_fast: Continuing EAP-TLS (4) eap_fast: Peer ACKed our handshake fragment. handshake is finished (4) eap_fast: [eaptls verify] = success (4) eap_fast: [eaptls process] = success (4) eap_fast: Session established. Proceeding to decode tunneled attributes (4) eap_fast: Using anonymous provisioning (4) eap_fast: Deriving EAP-FAST keys (4) eap_fast: OpenSSL: keyblock size: key_len=16 MD_size=20 IV_len=16 (4) eap_fast: Sending EAP-Identity (4) eap_fast: Challenge (4) eap: Sending EAP Request (code 1) ID 5 length 43 (4) eap: EAP session adding &reply:State = 0xdd0d245ad9080f20 (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) # Executing group from file /etc/freeradius/sites-enabled/default (4) Challenge { ... } # empty sub-section is ignored (4) Sent Access-Challenge Id 3 from 192.168.1.1:1812 to 192.168.1.2:1812 length 0 (4) EAP-Message = 0x0105002b2b011703010020b429cd62c1c4121d328eb7fa42adac3a32847ad76d0dfd004739210826a7c813 (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0xdd0d245ad9080f20721e27c81496baf3 (4) Finished request Waking up in 0.9 seconds. (5) Received Access-Request Id 4 from 192.168.1.2:1812 to 192.168.1.1:1812 length 214 (5) NAS-IP-Address = 192.168.0.1 (5) NAS-Port-Type = Async (5) User-Name = "IxiaUser3" (5) Calling-Station-Id = ".\202\020M" (5) Service-Type = Framed-User (5) Framed-MTU = 1500 (5) Calling-Station-Id = "2e-82-10-4d-00-00" (5) State = 0xdd0d245ad9080f20721e27c81496baf3 (5) EAP-Message = 0x020500602b01170301002071d058fc61f099d77914ac3e68b5ce45aa935520376f2a36fb99e397d156585a1703010030c7d6b1c3486e1dba3a4de1466ff2b59fca5c91a43d79f7b2dca80861f7f53728cb697a5e60c7416282020f1326890e74 (5) Message-Authenticator = 0x22eb8bcdda79163419b9c835d6c2eda4 (5) session-state: No cached attributes (5) # Executing section authorize from file /etc/freeradius/sites-enabled/default (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /(a)\./) { (5) if (&User-Name =~ /(a)\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) [chap] = noop (5) [mschap] = noop (5) [digest] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "IxiaUser3", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) eap: Peer sent EAP Response (code 2) ID 5 length 96 (5) eap: No EAP Start, assuming it's an on-going EAP conversation (5) [eap] = updated (5) files: users: Matched entry IxiaUser3 at line 89 (5) [files] = ok (5) [expiration] = noop (5) [logintime] = noop (5) pap: WARNING: Auth-Type already set. Not setting to PAP (5) [pap] = noop (5) } # authorize = updated (5) Found Auth-Type = eap (5) # Executing group from file /etc/freeradius/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0xdd0d245ad9080f20 (5) eap: Finished EAP session with state 0xdd0d245ad9080f20 (5) eap: Previous EAP request found for state 0xdd0d245ad9080f20, released from the list (5) eap: Peer sent packet with method EAP FAST (43) (5) eap: Calling submodule eap_fast to process data (5) eap_fast: Authenticate (5) eap_fast: Continuing EAP-TLS (5) eap_fast: [eaptls verify] = ok (5) eap_fast: Done initial handshake (5) eap_fast: [eaptls process] = ok (5) eap_fast: Session established. Proceeding to decode tunneled attributes (5) eap_fast: EAP-FAST TLV 9 is longer than room remaining in the packet (18 > 14). (5) eap_fast: Reject (5) eap: ERROR: Failed continuing EAP FAST (43) session. EAP sub-module failed (5) eap: Sending EAP Failure (code 4) ID 5 length 4 (5) eap: Failed in EAP select (5) [eap] = invalid (5) } # authenticate = invalid (5) Failed to authenticate the user (5) Using Post-Auth-Type Reject (5) # Executing group from file /etc/freeradius/sites-enabled/default (5) Post-Auth-Type REJECT { (5) attr_filter.access_reject: EXPAND %{User-Name} (5) attr_filter.access_reject: --> IxiaUser3 (5) attr_filter.access_reject: Matched entry DEFAULT at line 11 (5) [attr_filter.access_reject] = updated (5) [eap] = noop (5) policy remove_reply_message_if_eap { (5) if (&reply:EAP-Message && &reply:Reply-Message) { (5) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (5) else { (5) [noop] = noop (5) } # else = noop (5) } # policy remove_reply_message_if_eap = noop (5) } # Post-Auth-Type REJECT = updated (5) Delaying response for 1.000000 seconds Waking up in 0.6 seconds. Waking up in 0.2 seconds. (0) Cleaning up request packet ID 255 with timestamp +105 (1) Cleaning up request packet ID 0 with timestamp +105 (2) Cleaning up request packet ID 1 with timestamp +105 (5) Sending delayed response (5) Sent Access-Reject Id 4 from 192.168.1.1:1812 to 192.168.1.2:1812 length 44 (5) EAP-Message = 0x04050004 (5) Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.9 seconds. (3) Cleaning up request packet ID 2 with timestamp +109 (4) Cleaning up request packet ID 3 with timestamp +109 (5) Cleaning up request packet ID 4 with timestamp +109 Ready to process requests

2 1

freeradius winbind and require-membership-of
by Vieri 08 Dec '17

08 Dec '17

Hi, I used to specify an AD group with a command such as: /usr/bin/ntlm_auth --request-nt-key --username=%{Stripped-User-Name:-%{User-Name:-None}} --domain=DOMAIN --require-membership-of=DOMAIN\\ALLOWED_GROUP --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00} I'm now using winbind with freeradius. mods-available/mschap: winbind_username = "%{mschap:User-Name}" winbind_domain = "%{mschap:NT-Domain}" Is there a require-membership-of alternative for winbind? Thanks, Vieri

2 1

connectivity issues with different devices
by Andrew Meyer 07 Dec '17

07 Dec '17

Hello, I emailed in about a week ago trying to get eap+ttls configured to work with my MacBooks and mobile devices. I have finally gotten that working. However now i'm running into another issues. We had to do a code upgrade on my wireless to support TLS 1.2 which is now done. Right now i'm facing an issue JUST on Mac OS X High Sierra where it is not able to authenticate. In order to get the mobile devices working on my test SSID I had to disable EAP+TLS termination from the Access Points to the FreeRADIUS server. I have EAP+TTLS setup to use PAP beacuse I'm authenticating to LDAP/FreeIPA. This is working for Mac OS X 10.11.x, 10.12.x, Android 6 & 7, but not for High Sierra 10.13.x. I am still working on procuring a Apple Mobile device that is on the latest code. So i'm trying to figure out if I need to change the config slightly but not 100% sure. But here is my debug output right now: Thu Dec 7 21:00:28 2017 : Debug: (35) Message-Authenticator = 0x9cc50130f378dd9808a639a0c01c246d Thu Dec 7 21:00:28 2017 : Debug: (35) session-state: No cached attributes Thu Dec 7 21:00:28 2017 : Debug: (35) # Executing section authorize from file /etc/raddb/sites-enabled/default Thu Dec 7 21:00:28 2017 : Debug: (35) authorize { Thu Dec 7 21:00:28 2017 : Debug: (35) policy filter_username { Thu Dec 7 21:00:28 2017 : Debug: (35) if (&User-Name) { Thu Dec 7 21:00:28 2017 : Debug: (35) if (&User-Name) -> TRUE Thu Dec 7 21:00:28 2017 : Debug: (35) if (&User-Name) { Thu Dec 7 21:00:28 2017 : Debug: (35) if (&User-Name =~ / /) { Thu Dec 7 21:00:28 2017 : Debug: No matches Thu Dec 7 21:00:28 2017 : Debug: (35) if (&User-Name =~ / /) -> FALSE Thu Dec 7 21:00:28 2017 : Debug: (35) if (&User-Name =~ /@[^@]*@/ ) { Thu Dec 7 21:00:28 2017 : Debug: No matches Thu Dec 7 21:00:28 2017 : Debug: (35) if (&User-Name =~ /@[^@]*@/ ) -> FALSE Thu Dec 7 21:00:28 2017 : Debug: (35) if (&User-Name =~ /\.\./ ) { Thu Dec 7 21:00:28 2017 : Debug: No matches Thu Dec 7 21:00:28 2017 : Debug: (35) if (&User-Name =~ /\.\./ ) -> FALSE Thu Dec 7 21:00:28 2017 : Debug: (35) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { Thu Dec 7 21:00:28 2017 : Debug: No matches Thu Dec 7 21:00:28 2017 : Debug: (35) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE Thu Dec 7 21:00:28 2017 : Debug: (35) if (&User-Name =~ /\.$/) { Thu Dec 7 21:00:28 2017 : Debug: No matches Thu Dec 7 21:00:28 2017 : Debug: (35) if (&User-Name =~ /\.$/) -> FALSE Thu Dec 7 21:00:28 2017 : Debug: (35) if (&User-Name =~ /(a)\./) { Thu Dec 7 21:00:28 2017 : Debug: No matches Thu Dec 7 21:00:28 2017 : Debug: (35) if (&User-Name =~ /(a)\./) -> FALSE Thu Dec 7 21:00:28 2017 : Debug: (35) } # if (&User-Name) = notfound Thu Dec 7 21:00:28 2017 : Debug: (35) } # policy filter_username = notfound Thu Dec 7 21:00:28 2017 : Debug: (35) modsingle[authorize]: calling preprocess (rlm_preprocess) Thu Dec 7 21:00:28 2017 : Debug: (35) modsingle[authorize]: returned from preprocess (rlm_preprocess) Thu Dec 7 21:00:28 2017 : Debug: (35) [preprocess] = ok Thu Dec 7 21:00:28 2017 : Debug: (35) modsingle[authorize]: calling chap (rlm_chap) Thu Dec 7 21:00:28 2017 : Debug: (35) modsingle[authorize]: returned from chap (rlm_chap) Thu Dec 7 21:00:28 2017 : Debug: (35) [chap] = noop Thu Dec 7 21:00:28 2017 : Debug: (35) modsingle[authorize]: calling mschap (rlm_mschap) Thu Dec 7 21:00:28 2017 : Debug: (35) modsingle[authorize]: returned from mschap (rlm_mschap) Thu Dec 7 21:00:28 2017 : Debug: (35) [mschap] = noop Thu Dec 7 21:00:28 2017 : Debug: (35) modsingle[authorize]: calling digest (rlm_digest) Thu Dec 7 21:00:28 2017 : Debug: (35) modsingle[authorize]: returned from digest (rlm_digest) Thu Dec 7 21:00:28 2017 : Debug: (35) [digest] = noop Thu Dec 7 21:00:28 2017 : Debug: (35) modsingle[authorize]: calling suffix (rlm_realm) Thu Dec 7 21:00:28 2017 : Debug: (35) suffix: Checking for suffix after "@" Thu Dec 7 21:00:28 2017 : Debug: (35) suffix: No '@' in User-Name = "andrew.meyer", looking up realm NULL Thu Dec 7 21:00:28 2017 : Debug: (35) suffix: No such realm "NULL" Thu Dec 7 21:00:28 2017 : Debug: (35) modsingle[authorize]: returned from suffix (rlm_realm) Thu Dec 7 21:00:28 2017 : Debug: (35) [suffix] = noop Thu Dec 7 21:00:28 2017 : Debug: (35) modsingle[authorize]: calling eap (rlm_eap) Thu Dec 7 21:00:28 2017 : Debug: (35) eap: Peer sent EAP Response (code 2) ID 8 length 119 Thu Dec 7 21:00:28 2017 : Debug: (35) eap: Continuing tunnel setup Thu Dec 7 21:00:28 2017 : Debug: (35) modsingle[authorize]: returned from eap (rlm_eap) Thu Dec 7 21:00:28 2017 : Debug: (35) [eap] = ok Thu Dec 7 21:00:28 2017 : Debug: (35) } # authorize = ok Thu Dec 7 21:00:28 2017 : Debug: (35) Found Auth-Type = eap Thu Dec 7 21:00:28 2017 : Debug: (35) # Executing group from file /etc/raddb/sites-enabled/default Thu Dec 7 21:00:28 2017 : Debug: (35) authenticate { Thu Dec 7 21:00:28 2017 : Debug: (35) modsingle[authenticate]: calling eap (rlm_eap) Thu Dec 7 21:00:28 2017 : Debug: (35) eap: Expiring EAP session with state 0x7ee913c27feb09b0 Thu Dec 7 21:00:28 2017 : Debug: (35) eap: Finished EAP session with state 0x4bff8a3e4df79f46 Thu Dec 7 21:00:28 2017 : Debug: (35) eap: Previous EAP request found for state 0x4bff8a3e4df79f46, released from the list Thu Dec 7 21:00:28 2017 : Debug: (35) eap: Peer sent packet with method EAP TTLS (21) Thu Dec 7 21:00:28 2017 : Debug: (35) eap: Calling submodule eap_ttls to process data Thu Dec 7 21:00:28 2017 : Debug: (35) eap_ttls: Authenticate Thu Dec 7 21:00:28 2017 : Debug: (35) eap_ttls: Continuing EAP-TLS Thu Dec 7 21:00:28 2017 : Debug: (35) eap_ttls: Peer sent flags --L Thu Dec 7 21:00:28 2017 : Debug: (35) eap_ttls: Peer indicated complete TLS record size will be 109 bytes Thu Dec 7 21:00:28 2017 : Debug: (35) eap_ttls: Got complete TLS record (109 bytes) Thu Dec 7 21:00:28 2017 : Debug: (35) eap_ttls: [eaptls verify] = length included Thu Dec 7 21:00:28 2017 : Debug: Ignoring cbtls_msg call with pseudo content type 256, version 0 Thu Dec 7 21:00:28 2017 : Debug: (35) eap_ttls: [eaptls process] = ok Thu Dec 7 21:00:28 2017 : Debug: (35) eap_ttls: Session established. Proceeding to decode tunneled attributes Thu Dec 7 21:00:28 2017 : Debug: (35) eap_ttls: Got tunneled request Thu Dec 7 21:00:28 2017 : Debug: (35) eap_ttls: EAP-Message = 0x020200471a02020042310c2b32464a4d784b18430da9031e0a2c0000000000000000b79f070b5edc9d77e6b3a8afe5e8e14058595469c43a365700616e647265772e6d65796572 Thu Dec 7 21:00:28 2017 : Debug: (35) eap_ttls: FreeRADIUS-Proxied-To = 127.0.0.1 Thu Dec 7 21:00:28 2017 : Debug: (35) Virtual server inner-tunnel received request Thu Dec 7 21:00:28 2017 : Debug: (35) EAP-Message = 0x020200471a02020042310c2b32464a4d784b18430da9031e0a2c0000000000000000b79f070b5edc9d77e6b3a8afe5e8e14058595469c43a365700616e647265772e6d65796572 Thu Dec 7 21:00:28 2017 : Debug: (35) FreeRADIUS-Proxied-To = 127.0.0.1 Thu Dec 7 21:00:28 2017 : Debug: (35) User-Name = "andrew.meyer" Thu Dec 7 21:00:28 2017 : Debug: (35) State = 0x7ee913c27feb09b057d7e8dcddbcec86 Thu Dec 7 21:00:28 2017 : WARNING: (35) Outer and inner identities are the same. User privacy is compromised. Thu Dec 7 21:00:28 2017 : Debug: (35) server inner-tunnel { Thu Dec 7 21:00:28 2017 : Debug: (35) session-state: No cached attributes Thu Dec 7 21:00:28 2017 : Debug: (35) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel Thu Dec 7 21:00:28 2017 : Debug: (35) authorize { Thu Dec 7 21:00:28 2017 : Debug: (35) policy filter_username { Thu Dec 7 21:00:28 2017 : Debug: (35) if (&User-Name) { Thu Dec 7 21:00:28 2017 : Debug: (35) if (&User-Name) -> TRUE Thu Dec 7 21:00:28 2017 : Debug: (35) if (&User-Name) { Thu Dec 7 21:00:28 2017 : Debug: (35) if (&User-Name =~ / /) { Thu Dec 7 21:00:28 2017 : Debug: No matches Thu Dec 7 21:00:28 2017 : Debug: (35) if (&User-Name =~ / /) -> FALSE Thu Dec 7 21:00:28 2017 : Debug: (35) if (&User-Name =~ /@[^@]*@/ ) { Thu Dec 7 21:00:28 2017 : Debug: No matches Thu Dec 7 21:00:28 2017 : Debug: (35) if (&User-Name =~ /@[^@]*@/ ) -> FALSE Thu Dec 7 21:00:28 2017 : Debug: (35) if (&User-Name =~ /\.\./ ) { Thu Dec 7 21:00:28 2017 : Debug: No matches Thu Dec 7 21:00:28 2017 : Debug: (35) if (&User-Name =~ /\.\./ ) -> FALSE Thu Dec 7 21:00:28 2017 : Debug: (35) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { Thu Dec 7 21:00:28 2017 : Debug: No matches Thu Dec 7 21:00:28 2017 : Debug: (35) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE Thu Dec 7 21:00:28 2017 : Debug: (35) if (&User-Name =~ /\.$/) { Thu Dec 7 21:00:28 2017 : Debug: No matches Thu Dec 7 21:00:28 2017 : Debug: (35) if (&User-Name =~ /\.$/) -> FALSE Thu Dec 7 21:00:28 2017 : Debug: (35) if (&User-Name =~ /(a)\./) { Thu Dec 7 21:00:28 2017 : Debug: No matches Thu Dec 7 21:00:28 2017 : Debug: (35) if (&User-Name =~ /(a)\./) -> FALSE Thu Dec 7 21:00:28 2017 : Debug: (35) } # if (&User-Name) = notfound Thu Dec 7 21:00:28 2017 : Debug: (35) } # policy filter_username = notfound Thu Dec 7 21:00:28 2017 : Debug: (35) modsingle[authorize]: calling chap (rlm_chap) Thu Dec 7 21:00:28 2017 : Debug: (35) modsingle[authorize]: returned from chap (rlm_chap) Thu Dec 7 21:00:28 2017 : Debug: (35) [chap] = noop Thu Dec 7 21:00:28 2017 : Debug: (35) modsingle[authorize]: calling mschap (rlm_mschap) Thu Dec 7 21:00:28 2017 : Debug: (35) modsingle[authorize]: returned from mschap (rlm_mschap) Thu Dec 7 21:00:28 2017 : Debug: (35) [mschap] = noop Thu Dec 7 21:00:28 2017 : Debug: (35) modsingle[authorize]: calling suffix (rlm_realm) Thu Dec 7 21:00:28 2017 : Debug: (35) suffix: Checking for suffix after "@" Thu Dec 7 21:00:28 2017 : Debug: (35) suffix: No '@' in User-Name = "andrew.meyer", looking up realm NULL Thu Dec 7 21:00:28 2017 : Debug: (35) suffix: No such realm "NULL" Thu Dec 7 21:00:28 2017 : Debug: (35) modsingle[authorize]: returned from suffix (rlm_realm) Thu Dec 7 21:00:28 2017 : Debug: (35) [suffix] = noop Thu Dec 7 21:00:28 2017 : Debug: (35) update control { Thu Dec 7 21:00:28 2017 : Debug: (35) &Proxy-To-Realm := LOCAL Thu Dec 7 21:00:28 2017 : Debug: (35) } # update control = noop Thu Dec 7 21:00:28 2017 : Debug: (35) modsingle[authorize]: calling eap (rlm_eap) Thu Dec 7 21:00:28 2017 : Debug: (35) eap: Peer sent EAP Response (code 2) ID 2 length 71 Thu Dec 7 21:00:28 2017 : Debug: (35) eap: No EAP Start, assuming it's an on-going EAP conversation Thu Dec 7 21:00:28 2017 : Debug: (35) modsingle[authorize]: returned from eap (rlm_eap) Thu Dec 7 21:00:28 2017 : Debug: (35) [eap] = updated Thu Dec 7 21:00:28 2017 : Debug: (35) modsingle[authorize]: calling files (rlm_files) Thu Dec 7 21:00:28 2017 : Debug: (35) modsingle[authorize]: returned from files (rlm_files) Thu Dec 7 21:00:28 2017 : Debug: (35) [files] = noop Thu Dec 7 21:00:28 2017 : Debug: (35) modsingle[authorize]: calling ldap (rlm_ldap) Thu Dec 7 21:00:28 2017 : Debug: (35) ldap: EXPAND TMPL LITERAL Thu Dec 7 21:00:28 2017 : Debug: (35) ldap: EXPAND TMPL LITERAL Thu Dec 7 21:00:28 2017 : Debug: (35) ldap: EXPAND TMPL LITERAL Thu Dec 7 21:00:28 2017 : Debug: (35) ldap: EXPAND TMPL LITERAL Thu Dec 7 21:00:28 2017 : Debug: rlm_ldap (ldap): Reserved connection (10) Thu Dec 7 21:00:28 2017 : Debug: (35) ldap: EXPAND TMPL XLAT Thu Dec 7 21:00:28 2017 : Debug: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) Thu Dec 7 21:00:28 2017 : Debug: Parsed xlat tree: Thu Dec 7 21:00:28 2017 : Debug: literal --> (uid= Thu Dec 7 21:00:28 2017 : Debug: XLAT-IF { Thu Dec 7 21:00:28 2017 : Debug: attribute --> Stripped-User-Name Thu Dec 7 21:00:28 2017 : Debug: } Thu Dec 7 21:00:28 2017 : Debug: XLAT-ELSE { Thu Dec 7 21:00:28 2017 : Debug: attribute --> User-Name Thu Dec 7 21:00:28 2017 : Debug: } Thu Dec 7 21:00:28 2017 : Debug: literal --> ) Thu Dec 7 21:00:28 2017 : Debug: (35) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) Thu Dec 7 21:00:28 2017 : Debug: (35) ldap: --> (uid=andrew.meyer) Thu Dec 7 21:00:28 2017 : Debug: (35) ldap: EXPAND TMPL LITERAL Thu Dec 7 21:00:28 2017 : Debug: (35) ldap: Performing search in "cn=users,cn=accounts,dc=gatewayblend,dc=net" with filter "(uid=andrew.meyer)", scope "sub" Thu Dec 7 21:00:28 2017 : Debug: (35) ldap: Waiting for search result... Thu Dec 7 21:00:28 2017 : Debug: (35) ldap: User object found at DN "uid=andrew.meyer,cn=users,cn=accounts,dc=gatewayblend,dc=net" Thu Dec 7 21:00:28 2017 : Debug: (35) ldap: Processing user attributes Thu Dec 7 21:00:28 2017 : Debug: (35) ldap: Attribute "userPassword" not found in LDAP object Thu Dec 7 21:00:28 2017 : Debug: (35) ldap: Attribute "radiusControlAttribute" not found in LDAP object Thu Dec 7 21:00:28 2017 : Debug: (35) ldap: Attribute "radiusRequestAttribute" not found in LDAP object Thu Dec 7 21:00:28 2017 : Debug: (35) ldap: Attribute "radiusReplyAttribute" not found in LDAP object Thu Dec 7 21:00:28 2017 : WARNING: (35) ldap: No "known good" password added. Ensure the admin user has permission to read the password attribute Thu Dec 7 21:00:28 2017 : WARNING: (35) ldap: PAP authentication will *NOT* work with Active Directory (if that is what you were trying to configure) Thu Dec 7 21:00:28 2017 : Debug: rlm_ldap (ldap): Released connection (10) Thu Dec 7 21:00:28 2017 : Debug: (35) modsingle[authorize]: returned from ldap (rlm_ldap) Thu Dec 7 21:00:28 2017 : Debug: (35) [ldap] = ok Thu Dec 7 21:00:28 2017 : Debug: (35) if ((ok || updated) && User-Password) { Thu Dec 7 21:00:28 2017 : Debug: (35) if ((ok || updated) && User-Password) -> FALSE Thu Dec 7 21:00:28 2017 : Debug: (35) modsingle[authorize]: calling expiration (rlm_expiration) Thu Dec 7 21:00:28 2017 : Debug: (35) modsingle[authorize]: returned from expiration (rlm_expiration) Thu Dec 7 21:00:28 2017 : Debug: (35) [expiration] = noop Thu Dec 7 21:00:28 2017 : Debug: (35) modsingle[authorize]: calling logintime (rlm_logintime) Thu Dec 7 21:00:28 2017 : Debug: (35) modsingle[authorize]: returned from logintime (rlm_logintime) Thu Dec 7 21:00:28 2017 : Debug: (35) [logintime] = noop Thu Dec 7 21:00:28 2017 : Debug: (35) modsingle[authorize]: calling pap (rlm_pap) Thu Dec 7 21:00:28 2017 : Debug: (35) modsingle[authorize]: returned from pap (rlm_pap) Thu Dec 7 21:00:28 2017 : Debug: (35) [pap] = noop Thu Dec 7 21:00:28 2017 : Debug: (35) } # authorize = updated Thu Dec 7 21:00:28 2017 : Debug: (35) Found Auth-Type = eap Thu Dec 7 21:00:28 2017 : Debug: (35) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel Thu Dec 7 21:00:28 2017 : Debug: (35) authenticate { Thu Dec 7 21:00:28 2017 : Debug: (35) modsingle[authenticate]: calling eap (rlm_eap) Thu Dec 7 21:00:28 2017 : Debug: (35) eap: Expiring EAP session with state 0x7ee913c27feb09b0 Thu Dec 7 21:00:28 2017 : Debug: (35) eap: Finished EAP session with state 0x7ee913c27feb09b0 Thu Dec 7 21:00:28 2017 : Debug: (35) eap: Previous EAP request found for state 0x7ee913c27feb09b0, released from the list Thu Dec 7 21:00:28 2017 : Debug: (35) eap: Peer sent packet with method EAP MSCHAPv2 (26) Thu Dec 7 21:00:28 2017 : Debug: (35) eap: Calling submodule eap_mschapv2 to process data Thu Dec 7 21:00:28 2017 : Debug: (35) eap_mschapv2: # Executing group from file /etc/raddb/sites-enabled/inner-tunnel Thu Dec 7 21:00:28 2017 : Debug: (35) eap_mschapv2: authenticate { Thu Dec 7 21:00:28 2017 : Debug: (35) eap_mschapv2: modsingle[authenticate]: calling mschap (rlm_mschap) Thu Dec 7 21:00:28 2017 : WARNING: (35) mschap: No Cleartext-Password configured. Cannot create NT-Password Thu Dec 7 21:00:28 2017 : WARNING: (35) mschap: No Cleartext-Password configured. Cannot create LM-Password Thu Dec 7 21:00:28 2017 : Debug: (35) mschap: Creating challenge hash with username: andrew.meyer Thu Dec 7 21:00:28 2017 : Debug: (35) mschap: Client is using MS-CHAPv2 Thu Dec 7 21:00:28 2017 : ERROR: (35) mschap: FAILED: No NT/LM-Password. Cannot perform authentication Thu Dec 7 21:00:28 2017 : ERROR: (35) mschap: MS-CHAP2-Response is incorrect Thu Dec 7 21:00:28 2017 : Debug: (35) modsingle[authenticate]: returned from mschap (rlm_mschap) Thu Dec 7 21:00:28 2017 : Debug: (35) [mschap] = reject Thu Dec 7 21:00:28 2017 : Debug: (35) } # authenticate = reject Thu Dec 7 21:00:28 2017 : Debug: (35) eap: Sending EAP Failure (code 4) ID 2 length 4 Thu Dec 7 21:00:28 2017 : Debug: (35) eap: Freeing handler Thu Dec 7 21:00:28 2017 : Debug: (35) modsingle[authenticate]: returned from eap (rlm_eap) Thu Dec 7 21:00:28 2017 : Debug: (35) [eap] = reject Thu Dec 7 21:00:28 2017 : Debug: (35) } # authenticate = reject Thu Dec 7 21:00:28 2017 : Debug: (35) Failed to authenticate the user Thu Dec 7 21:00:28 2017 : Debug: (35) Using Post-Auth-Type Reject Thu Dec 7 21:00:28 2017 : Debug: (35) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel Thu Dec 7 21:00:28 2017 : Debug: (35) Post-Auth-Type REJECT { Thu Dec 7 21:00:28 2017 : Debug: (35) modsingle[post-auth]: calling attr_filter.access_reject (rlm_attr_filter) Thu Dec 7 21:00:28 2017 : Debug: %{User-Name} Thu Dec 7 21:00:28 2017 : Debug: Parsed xlat tree: Thu Dec 7 21:00:28 2017 : Debug: attribute --> User-Name Thu Dec 7 21:00:28 2017 : Debug: (35) attr_filter.access_reject: EXPAND %{User-Name} Thu Dec 7 21:00:28 2017 : Debug: (35) attr_filter.access_reject: --> andrew.meyer Thu Dec 7 21:00:28 2017 : Debug: (35) attr_filter.access_reject: Matched entry DEFAULT at line 11 Thu Dec 7 21:00:28 2017 : Debug: (35) attr_filter.access_reject: MS-CHAP-Error = "\002E=691 R=1 C=6bfbf7b2dac4da0509b000cb87f64dd1 V=3 M=Authentication failed" allowed by MS-CHAP-Error =* "" Thu Dec 7 21:00:28 2017 : Debug: (35) attr_filter.access_reject: Attribute "MS-CHAP-Error" allowed by 1 rules, disallowed by 0 rules Thu Dec 7 21:00:28 2017 : Debug: (35) attr_filter.access_reject: EAP-Message = 0x04020004 allowed by EAP-Message =* 0x Thu Dec 7 21:00:28 2017 : Debug: (35) attr_filter.access_reject: Attribute "EAP-Message" allowed by 1 rules, disallowed by 0 rules Thu Dec 7 21:00:28 2017 : Debug: (35) attr_filter.access_reject: Message-Authenticator = 0x00000000000000000000000000000000 allowed by Message-Authenticator =* 0x Thu Dec 7 21:00:28 2017 : Debug: (35) attr_filter.access_reject: Attribute "Message-Authenticator" allowed by 1 rules, disallowed by 0 rules Thu Dec 7 21:00:28 2017 : Debug: (35) modsingle[post-auth]: returned from attr_filter.access_reject (rlm_attr_filter) Thu Dec 7 21:00:28 2017 : Debug: (35) [attr_filter.access_reject] = updated Thu Dec 7 21:00:28 2017 : Debug: (35) update outer.session-state { Thu Dec 7 21:00:28 2017 : Debug: (35) &Module-Failure-Message := &request:Module-Failure-Message -> 'mschap: FAILED: No NT/LM-Password. Cannot perform authentication' Thu Dec 7 21:00:28 2017 : Debug: (35) } # update outer.session-state = noop Thu Dec 7 21:00:28 2017 : Debug: (35) } # Post-Auth-Type REJECT = updated Thu Dec 7 21:00:28 2017 : Debug: (35) } # server inner-tunnel Thu Dec 7 21:00:28 2017 : Debug: (35) Virtual server sending reply Thu Dec 7 21:00:28 2017 : Debug: (35) MS-CHAP-Error = "\002E=691 R=1 C=6bfbf7b2dac4da0509b000cb87f64dd1 V=3 M=Authentication failed" Thu Dec 7 21:00:28 2017 : Debug: (35) EAP-Message = 0x04020004 Thu Dec 7 21:00:28 2017 : Debug: (35) Message-Authenticator = 0x00000000000000000000000000000000 Thu Dec 7 21:00:28 2017 : Debug: (35) eap_ttls: Got tunneled Access-Reject Thu Dec 7 21:00:28 2017 : ERROR: (35) eap: Failed continuing EAP TTLS (21) session. EAP sub-module failed Thu Dec 7 21:00:28 2017 : Debug: (35) eap: Sending EAP Failure (code 4) ID 8 length 4 Thu Dec 7 21:00:28 2017 : Debug: (35) eap: Failed in EAP select Thu Dec 7 21:00:28 2017 : Debug: (35) modsingle[authenticate]: returned from eap (rlm_eap) Thu Dec 7 21:00:28 2017 : Debug: (35) [eap] = invalid Thu Dec 7 21:00:28 2017 : Debug: (35) } # authenticate = invalid Thu Dec 7 21:00:28 2017 : Debug: (35) Failed to authenticate the user Thu Dec 7 21:00:28 2017 : Debug: (35) Using Post-Auth-Type Reject Thu Dec 7 21:00:28 2017 : Debug: (35) # Executing group from file /etc/raddb/sites-enabled/default Thu Dec 7 21:00:28 2017 : Debug: (35) Post-Auth-Type REJECT { Thu Dec 7 21:00:28 2017 : Debug: (35) modsingle[post-auth]: calling attr_filter.access_reject (rlm_attr_filter) Thu Dec 7 21:00:28 2017 : Debug: %{User-Name} Thu Dec 7 21:00:28 2017 : Debug: Parsed xlat tree: Thu Dec 7 21:00:28 2017 : Debug: attribute --> User-Name Thu Dec 7 21:00:28 2017 : Debug: (35) attr_filter.access_reject: EXPAND %{User-Name} Thu Dec 7 21:00:28 2017 : Debug: (35) attr_filter.access_reject: --> andrew.meyer Thu Dec 7 21:00:28 2017 : Debug: (35) attr_filter.access_reject: Matched entry DEFAULT at line 11 Thu Dec 7 21:00:28 2017 : Debug: (35) attr_filter.access_reject: EAP-Message = 0x04080004 allowed by EAP-Message =* 0x Thu Dec 7 21:00:28 2017 : Debug: (35) attr_filter.access_reject: Attribute "EAP-Message" allowed by 1 rules, disallowed by 0 rules Thu Dec 7 21:00:28 2017 : Debug: (35) attr_filter.access_reject: Message-Authenticator = 0x00000000000000000000000000000000 allowed by Message-Authenticator =* 0x Thu Dec 7 21:00:28 2017 : Debug: (35) attr_filter.access_reject: Attribute "Message-Authenticator" allowed by 1 rules, disallowed by 0 rules Thu Dec 7 21:00:28 2017 : Debug: (35) modsingle[post-auth]: returned from attr_filter.access_reject (rlm_attr_filter) Thu Dec 7 21:00:28 2017 : Debug: (35) [attr_filter.access_reject] = updated Thu Dec 7 21:00:28 2017 : Debug: (35) modsingle[post-auth]: calling eap (rlm_eap) Thu Dec 7 21:00:28 2017 : Debug: (35) eap: Reply already contained an EAP-Message, not inserting EAP-Failure Thu Dec 7 21:00:28 2017 : Debug: (35) modsingle[post-auth]: returned from eap (rlm_eap) Thu Dec 7 21:00:28 2017 : Debug: (35) [eap] = noop Thu Dec 7 21:00:28 2017 : Debug: (35) policy remove_reply_message_if_eap { Thu Dec 7 21:00:28 2017 : Debug: (35) if (&reply:EAP-Message && &reply:Reply-Message) { Thu Dec 7 21:00:28 2017 : Debug: (35) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE Thu Dec 7 21:00:28 2017 : Debug: (35) else { Thu Dec 7 21:00:28 2017 : Debug: (35) modsingle[post-auth]: calling noop (rlm_always) Thu Dec 7 21:00:28 2017 : Debug: (35) modsingle[post-auth]: returned from noop (rlm_always) Thu Dec 7 21:00:28 2017 : Debug: (35) [noop] = noop Thu Dec 7 21:00:28 2017 : Debug: (35) } # else = noop Thu Dec 7 21:00:28 2017 : Debug: (35) } # policy remove_reply_message_if_eap = noop Thu Dec 7 21:00:28 2017 : Debug: (35) } # Post-Auth-Type REJECT = updated Thu Dec 7 21:00:28 2017 : Debug: (35) Delaying response for 1.000000 seconds Thu Dec 7 21:00:28 2017 : Debug: Thread 4 waiting to be assigned a request Thu Dec 7 21:00:28 2017 : Debug: Waking up in 0.6 seconds. Thu Dec 7 21:00:29 2017 : Debug: (35) Sending delayed response Thu Dec 7 21:00:29 2017 : Debug: (35) Sent Access-Reject Id 249 from 10.1.6.160:1812 to 10.1.10.2:37381 length 44 Thu Dec 7 21:00:29 2017 : Debug: (35) EAP-Message = 0x04080004 Thu Dec 7 21:00:29 2017 : Debug: (35) Message-Authenticator = 0x00000000000000000000000000000000 Thu Dec 7 21:00:29 2017 : Debug: Waking up in 3.9 seconds. Thu Dec 7 21:00:33 2017 : Debug: (28) Cleaning up request packet ID 242 with timestamp +3225 Thu Dec 7 21:00:33 2017 : Debug: (29) Cleaning up request packet ID 243 with timestamp +3225 Thu Dec 7 21:00:33 2017 : Debug: (30) Cleaning up request packet ID 244 with timestamp +3225 Thu Dec 7 21:00:33 2017 : Debug: (31) Cleaning up request packet ID 245 with timestamp +3225 Thu Dec 7 21:00:33 2017 : Debug: (32) Cleaning up request packet ID 246 with timestamp +3225 Thu Dec 7 21:00:33 2017 : Debug: (33) Cleaning up request packet ID 247 with timestamp +3225 Thu Dec 7 21:00:33 2017 : Debug: (34) Cleaning up request packet ID 248 with timestamp +3225 Thu Dec 7 21:00:33 2017 : Debug: (35) Cleaning up request packet ID 249 with timestamp +3225 Thu Dec 7 21:00:33 2017 : Info: Ready to process requests Thank you in advance, Andrew

2 3

Subject: Re: Google authentication FreeRadius stop working
by Janet Wang 07 Dec '17

07 Dec '17

Thank you Alan Buxey. Here are my debug result: radtest jzwang(a)yyy.yyy.yy 'yyy11111' localhost 18120 testing123 Sending Access-Request of id 149 to 127.0.0.1 port 1812 User-Name = "jzwang(a)yyy.yyy.yy" User-Password = "yyy11111" NAS-IP-Address = 10.10.10.10 NAS-Port = 18120 Message-Authenticator = 0x00000000000000000000000000000000 Sending Access-Request of id 149 to 127.0.0.1 port 1812 User-Name = "jzwang(a)yyy.yyy.yy" User-Password = "yyy11111" NAS-IP-Address = 10.10.10.10 NAS-Port = 18120 Message-Authenticator = 0x00000000000000000000000000000000 Sending Access-Request of id 149 to 127.0.0.1 port 1812 User-Name = "jzwang(a)yyy.yyy.yy" User-Password = "yyy11111" NAS-IP-Address = 10.10.10.10 NAS-Port = 18120 Message-Authenticator = 0x00000000000000000000000000000000 radclient: no response from server for ID 149 socket 3 Ready to process requests. rad_recv: Access-Request packet from host 127.0.0.1 port 56584, id=149, length=8 9 User-Name = "jzwang(a)yyy.yyy.yy" User-Password = "yyy11111" NAS-IP-Address = 10.10.10.10 NAS-Port = 18120 Message-Authenticator = 0x40bb61c5f9140c89eceab51ae14f3df3 # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] Looking up realm "yyy.yyy.yy" for User-Name = "jzwang(a)yyy.yyy.yy" [suffix] No such realm "yyy.yyy.yy" ++[suffix] returns noop [eap] No EAP-Message, not doing EAP ++[eap] returns noop [files] users: Matched entry DEFAULT at line 73 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = PAM # Executing group from file /etc/freeradius/sites-enabled/default +- entering group authenticate {...} pam_pass: using pamauth string <radiusd> for pam.conf lookup pam_pass: authentication succeeded for <jzwang(a)yyy.yyy.yy> ++[pam] returns ok Login OK: [jzwang(a)yyy.yyy.yy/yyy11111] (from client localhost port 18120) # Executing section post-auth from file /etc/freeradius/sites-enabled/default +- entering group post-auth {...} ++[exec] returns noop Sending Access-Accept of id 149 to 127.0.0.1 port 56584 Finished request 0. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 127.0.0.1 port 56584, id=149, length=89 Sending duplicate reply to client localhost port 56584 - ID: 149 Sending Access-Accept of id 149 to 127.0.0.1 port 56584 Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 127.0.0.1 port 56584, id=149, length=89 Sending duplicate reply to client localhost port 56584 - ID: 149 Sending Access-Accept of id 149 to 127.0.0.1 port 56584 Waking up in 4.9 seconds. Cleaning up request 0 ID 149 with timestamp +164 Ready to process requests.

1 0