- Freeradius-Users - lists.freeradius.org

Debug output - writing TLS cache session shown as warning
by John Horne 01 Aug '17

01 Aug '17

Hello, Using FreeRADIUS 3.0.15, I was running radiusd in debug mode via radmin. I noticed that when a session was written to the TLS cache it was shown as a 'WARNING'. Not sure why it is a warning, shouldn't it be just a standard 'Debug' message? ====== (1438) Tue Aug 1 16:37:48 2017: Debug: eap_peap: Serialising session a18633f6fab2ad8d41d2c8fda152d89f891b1f052d75e6a915d1001c32cd14a7, and storing in cache (1438) Tue Aug 1 16:37:48 2017: WARNING: eap_peap: Wrote session a18633f6fab2ad8d41d2c8fda152d89f891b1f052d75e6a915d1001c32cd14a7 to /var/lib/radiusd/tlscache/a18633f6fab2ad8d41d2c8fda152d89f891b1f052d75e6a915d10 01c32cd14a7.asn1 (134 bytes) (1438) Tue Aug 1 16:37:48 2017: Debug: eap_peap: (other): SSL negotiation finished successfully ====== Thanks, John. -- John Horne | Senior Operations Analyst | Technology and Information Services University of Plymouth | Drake Circus | Plymouth | Devon | PL4 8AA | UK ________________________________ [http://www.plymouth.ac.uk/images/email_footer.gif]<http://www.plymouth.ac.uk/worldclass> This email and any files with it are confidential and intended solely for the use of the recipient to whom it is addressed. If you are not the intended recipient then copying, distribution or other use of the information contained is strictly prohibited and you should not rely on it. If you have received this email in error please let the sender know immediately and delete it from your system(s). Internet emails are not necessarily secure. While we take every care, Plymouth University accepts no responsibility for viruses and it is your responsibility to scan emails and their attachments. Plymouth University does not accept responsibility for any changes made after it was sent. Nothing in this email or its attachments constitutes an order for goods or services unless accompanied by an official order form.

1 0

Freeradius 3.0.12 EAP TLS Problem
by Seniha S. ÖZTEMİZ TULGAR 31 Jul '17

31 Jul '17

Hello, When I run the freeradius I get the foloowing debug log: (1) eap_ttls: WARNING: Total received TLS record fragments (50 bytes), does not equal indicated TLS record length (0 bytes) (1) eap_ttls: [eaptls verify] = ok (1) eap_ttls: Done initial handshake (1) eap_ttls: (other): before SSL initialization (1) eap_ttls: TLS_accept: before SSL initialization (1) eap_ttls: TLS_accept: before SSL initialization (1) eap_ttls: <<< recv TLS 1.2 [length 002d] (1) eap_ttls: >>> send TLS 1.0 Alert [length 0002], fatal handshake_failure (1) eap_ttls: ERROR: TLS Alert write:fatal:handshake failure tls: TLS_accept: Error in error (1) eap_ttls: ERROR: Failed in __FUNCTION__ (SSL_read): error:1417A0C1:SSL routines:tls_post_process_client_hello:no shared cipher (1) eap_ttls: ERROR: System call (I/O) error (-1) (1) eap_ttls: ERROR: TLS receive handshake failed during operation (1) eap_ttls: ERROR: [eaptls process] = fail (1) eap: ERROR: Failed continuing EAP TTLS (21) session. EAP sub-module failed Have you encountered this problem? How did you solve it? What can I do? -- Regards Seniha

5 18

packet for centos 7
by Dmitry Yashin 31 Jul '17

31 Jul '17

Hi, last version in Centos 7 is 3.0.4 , have someone packet 3.0.15 ? from this repo not install correctly https://packetfence.org/downloads/PacketFence/CentOS7/devel/x86_64/RPMS/

4 6

I have a problem with the authorization by LDAP and Authentication with AD
by I Aaaaaahhhhhh 31 Jul '17

31 Jul '17

Hello, the Server ist CentOS7.3 with Radius 3.0.15. The AD Server is a Windows 2012 R2. The Radius server is integrated into the Active Directory domain. I would like that only certain users connect to the AD domain. When I connect to the radius server via eapol_test, the authorization by LDAP as well as the AD authentication by AD perfectly. If I want to log on to the AD domain from a Windows 10 client with the same user account, this does not work. C5c5 is prepended to the username. A realm with the domain name and the content skip was created in the proxy.conf, as well as the ntdomain entry in the sites-enabeld / default, but the user name still contains C5C5. Here I add the debug content. ----- FreeRADIUS Version 3.0.15 Copyright (C) 1999-2017 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/raddb/dictionary including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/mods-enabled/ including configuration file /etc/raddb/mods-enabled/always including configuration file /etc/raddb/mods-enabled/attr_filter including configuration file /etc/raddb/mods-enabled/cache_eap including configuration file /etc/raddb/mods-enabled/chap including configuration file /etc/raddb/mods-enabled/date including configuration file /etc/raddb/mods-enabled/detail including configuration file /etc/raddb/mods-enabled/detail.log including configuration file /etc/raddb/mods-enabled/dhcp including configuration file /etc/raddb/mods-enabled/digest including configuration file /etc/raddb/mods-enabled/dynamic_clients including configuration file /etc/raddb/mods-enabled/eap including configuration file /etc/raddb/mods-enabled/echo including configuration file /etc/raddb/mods-enabled/exec including configuration file /etc/raddb/mods-enabled/expiration including configuration file /etc/raddb/mods-enabled/expr including configuration file /etc/raddb/mods-enabled/files including configuration file /etc/raddb/mods-enabled/linelog including configuration file /etc/raddb/mods-enabled/logintime including configuration file /etc/raddb/mods-enabled/mschap including configuration file /etc/raddb/mods-enabled/ntlm_auth including configuration file /etc/raddb/mods-enabled/pap including configuration file /etc/raddb/mods-enabled/passwd including configuration file /etc/raddb/mods-enabled/preprocess including configuration file /etc/raddb/mods-enabled/radutmp including configuration file /etc/raddb/mods-enabled/realm including configuration file /etc/raddb/mods-enabled/replicate including configuration file /etc/raddb/mods-enabled/soh including configuration file /etc/raddb/mods-enabled/sradutmp including configuration file /etc/raddb/mods-enabled/unix including configuration file /etc/raddb/mods-enabled/unpack including configuration file /etc/raddb/mods-enabled/utf8 including configuration file /etc/raddb/mods-enabled/ldap including files in directory /etc/raddb/policy.d/ including configuration file /etc/raddb/policy.d/abfab-tr including configuration file /etc/raddb/policy.d/accounting including configuration file /etc/raddb/policy.d/canonicalization including configuration file /etc/raddb/policy.d/control including configuration file /etc/raddb/policy.d/cui including configuration file /etc/raddb/policy.d/debug including configuration file /etc/raddb/policy.d/dhcp including configuration file /etc/raddb/policy.d/eap including configuration file /etc/raddb/policy.d/filter including configuration file /etc/raddb/policy.d/moonshot-targeted-ids including configuration file /etc/raddb/policy.d/operator-name including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/inner-tunnel main { security { allow_core_dumps = no } name = "radiusd" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" } main { name = "radiusd" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" libdir = "/usr/lib64/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes allow_vulnerable_openssl = "yes" } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } realm SEDLMEIER { } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 192.168.99.2 { ipaddr = 192.168.99.2 require_message_authenticator = no secret = <<< secret >>> shortname = "A4H124-24" nas_type = "other" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached systemd watchdog is disabled. # Creating Auth-Type = ntlm_auth # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_always # Loading module "reject" from file /etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_chap # Loading module "chap" from file /etc/raddb/mods-enabled/chap # Loaded module rlm_date # Loading module "date" from file /etc/raddb/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" utc = no } # Loaded module rlm_detail # Loading module "detail" from file /etc/raddb/mods-enabled/detail detail { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "auth_log" from file /etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_dhcp # Loading module "dhcp" from file /etc/raddb/mods-enabled/dhcp # Loaded module rlm_digest # Loading module "digest" from file /etc/raddb/mods-enabled/digest # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_eap # Loading module "eap" from file /etc/raddb/mods-enabled/eap eap { default_eap_type = "peap" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_exec # Loading module "echo" from file /etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loading module "exec" from file /etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/raddb/mods-enabled/expiration # Loaded module rlm_expr # Loading module "expr" from file /etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_files # Loading module "files" from file /etc/raddb/mods-enabled/files files { filename = "/etc/raddb/mods-config/files/authorize" acctusersfile = "/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy" } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/raddb/mods-enabled/linelog linelog { filename = "/var/log/radius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/var/log/radius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = yes require_strong = yes with_ntdomain_hack = yes ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --username=%{mschap:User-Name:-None} --domain=%{%{mschap:NT-Domain}:-SEDLMEIER} --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}" passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loading module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/usr/bin/ntlm_auth --request-nt-key --username=%{mschap:User-Name} --domain=SEDLMEIER --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_pap # Loading module "pap" from file /etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups" hints = "/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/raddb/mods-enabled/replicate # Loaded module rlm_soh # Loading module "soh" from file /etc/raddb/mods-enabled/soh soh { dhcp = yes } # Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_unix # Loading module "unix" from file /etc/raddb/mods-enabled/unix unix { radwtmp = "/var/log/radius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_unpack # Loading module "unpack" from file /etc/raddb/mods-enabled/unpack # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/raddb/mods-enabled/utf8 # Loaded module rlm_ldap # Loading module "ldap" from file /etc/raddb/mods-enabled/ldap ldap { server = "sed-vm-dc-01.sedlmeier.local" identity = "CN=Anonymous,CN=Users,DC=sedlmeier,DC=local" password = <<< secret >>> sasl { } user { scope = "sub" access_positive = yes sasl { } } group { filter = "(objectClass=posixGroup)" scope = "sub" name_attribute = "cn" membership_attribute = "memberOf" cacheable_name = no cacheable_dn = no } client { filter = "(objectClass=radiusClient)" scope = "sub" base_dn = "OU=Mitarbeiter,DC=sedlmeier,DC=local" } profile { } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 1 res_timeout = 10 srv_timelimit = 3 idle = 60 probes = 3 interval = 3 } tls { start_tls = no } } Creating attribute LDAP-Group instantiate { } # Instantiating module "reject" from file /etc/raddb/mods-enabled/always # Instantiating module "fail" from file /etc/raddb/mods-enabled/always # Instantiating module "ok" from file /etc/raddb/mods-enabled/always # Instantiating module "handled" from file /etc/raddb/mods-enabled/always # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always # Instantiating module "noop" from file /etc/raddb/mods-enabled/always # Instantiating module "updated" from file /etc/raddb/mods-enabled/always # Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject [/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response # Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/raddb/certs" pem_file_type = yes private_key_file = "/etc/raddb/certs/server.pem" certificate_file = "/etc/raddb/certs/server.pem" ca_file = "/etc/raddb/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/raddb/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "expiration" from file /etc/raddb/mods-enabled/expiration # Instantiating module "files" from file /etc/raddb/mods-enabled/files reading pairlist file /etc/raddb/mods-config/files/authorize reading pairlist file /etc/raddb/mods-config/files/accounting reading pairlist file /etc/raddb/mods-config/files/pre-proxy # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog # Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap rlm_mschap (mschap): authenticating by calling 'ntlm_auth' # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap # Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "preprocess" from file /etc/raddb/mods-enabled/preprocess reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /etc/raddb/mods-config/preprocess/hints # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm # Instantiating module "ldap" from file /etc/raddb/mods-enabled/ldap rlm_ldap: libldap vendor: OpenLDAP, version: 20440 accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } rlm_ldap (ldap): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldap://sed-vm-dc-01.sedlmeier.local:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots used rlm_ldap (ldap): Connecting to ldap://sed-vm-dc-01.sedlmeier.local:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots used rlm_ldap (ldap): Connecting to ldap://sed-vm-dc-01.sedlmeier.local:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots used rlm_ldap (ldap): Connecting to ldap://sed-vm-dc-01.sedlmeier.local:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots used rlm_ldap (ldap): Connecting to ldap://sed-vm-dc-01.sedlmeier.local:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/raddb/radiusd.conf } # server server default { # from file /etc/raddb/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/raddb/sites-enabled/inner-tunnel:333 } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on proxy address * port 33834 Listening on proxy address :: port 42671 Ready to process requests (0) Received Access-Request Id 73 from 192.168.99.2:56759 to 192.168.99.13:1812 length 217 (0) User-Name = "host/rob-nb-3302.sedlmeier.local" (0) Service-Type = Framed-User (0) Called-Station-Id = "D8-84-66-1C-A0-C2" (0) Calling-Station-Id = "74-2B-62-85-F5-5D" (0) NAS-Identifier = "sed-nw-sw-01.sedlmeier.local" (0) NAS-Port = 5 (0) NAS-Port-Id = "fe.1.5" (0) Framed-MTU = 1500 (0) NAS-Port-Type = Ethernet (0) EAP-Message = 0x0201002501686f73742f726f622d6e622d333330322e7365646c6d656965722e6c6f63616c (0) NAS-IP-Address = 0.0.0.0 (0) Message-Authenticator = 0x1fb3f6d070bfcc1f115c0c3ef7304279 (0) # Executing section authorize from file /etc/raddb/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "host/rob-nb-3302.sedlmeier.local", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) ntdomain: Checking for prefix before "\" (0) ntdomain: No '\' in User-Name = "host/rob-nb-3302.sedlmeier.local", looking up realm NULL (0) ntdomain: No such realm "NULL" (0) [ntdomain] = noop (0) eap: Peer sent EAP Response (code 2) ID 1 length 37 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/raddb/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_peap to process data (0) eap_peap: Initiating new EAP-TLS session (0) eap_peap: [eaptls start] = request (0) eap: Sending EAP Request (code 1) ID 2 length 6 (0) eap: EAP session adding &reply:State = 0xe102a8b5e100b184 (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) # Executing group from file /etc/raddb/sites-enabled/default (0) Challenge { ... } # empty sub-section is ignored (0) Sent Access-Challenge Id 73 from 192.168.99.13:1812 to 192.168.99.2:56759 length 0 (0) EAP-Message = 0x010200061920 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0xe102a8b5e100b184d77738e9a0e9bb1d (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 74 from 192.168.99.2:56759 to 192.168.99.13:1812 length 368 (1) User-Name = "host/rob-nb-3302.sedlmeier.local" (1) Service-Type = Framed-User (1) Called-Station-Id = "D8-84-66-1C-A0-C2" (1) Calling-Station-Id = "74-2B-62-85-F5-5D" (1) NAS-Identifier = "sed-nw-sw-01.sedlmeier.local" (1) NAS-Port = 5 (1) NAS-Port-Id = "fe.1.5" (1) Framed-MTU = 1500 (1) NAS-Port-Type = Ethernet (1) State = 0xe102a8b5e100b184d77738e9a0e9bb1d (1) EAP-Message = 0x020200aa1980000000a0160303009b010000970303597ef38f86bc72036aa032d81d72191d9453345ae162c46870df53732eea4aa100002ec02cc02bc030c02f009f009ec024c023c028c027c00ac009c014c013009d009c003d003c0035002f000a0005000401000040000500050100000000000a0008 (1) NAS-IP-Address = 0.0.0.0 (1) Message-Authenticator = 0x38b419601ddc1180666d1ddd50c69009 (1) session-state: No cached attributes (1) # Executing section authorize from file /etc/raddb/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /(a)\./) { (1) if (&User-Name =~ /(a)\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "host/rob-nb-3302.sedlmeier.local", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) ntdomain: Checking for prefix before "\" (1) ntdomain: No '\' in User-Name = "host/rob-nb-3302.sedlmeier.local", looking up realm NULL (1) ntdomain: No such realm "NULL" (1) [ntdomain] = noop (1) eap: Peer sent EAP Response (code 2) ID 2 length 170 (1) eap: Continuing tunnel setup (1) [eap] = ok (1) } # authorize = ok (1) Found Auth-Type = eap (1) # Executing group from file /etc/raddb/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0xe102a8b5e100b184 (1) eap: Finished EAP session with state 0xe102a8b5e100b184 (1) eap: Previous EAP request found for state 0xe102a8b5e100b184, released from the list (1) eap: Peer sent packet with method EAP PEAP (25) (1) eap: Calling submodule eap_peap to process data (1) eap_peap: Continuing EAP-TLS (1) eap_peap: Peer indicated complete TLS record size will be 160 bytes (1) eap_peap: Got complete TLS record (160 bytes) (1) eap_peap: [eaptls verify] = length included (1) eap_peap: (other): before/accept initialization (1) eap_peap: TLS_accept: before/accept initialization (1) eap_peap: <<< recv TLS 1.2 [length 009b] (1) eap_peap: TLS_accept: SSLv3 read client hello A (1) eap_peap: >>> send TLS 1.2 [length 0039] (1) eap_peap: TLS_accept: SSLv3 write server hello A (1) eap_peap: >>> send TLS 1.2 [length 0910] (1) eap_peap: TLS_accept: SSLv3 write certificate A (1) eap_peap: >>> send TLS 1.2 [length 014d] (1) eap_peap: TLS_accept: SSLv3 write key exchange A (1) eap_peap: >>> send TLS 1.2 [length 0004] (1) eap_peap: TLS_accept: SSLv3 write server done A (1) eap_peap: TLS_accept: SSLv3 flush data (1) eap_peap: TLS_accept: Need to read more data: SSLv3 read client certificate A (1) eap_peap: TLS_accept: Need to read more data: SSLv3 read client certificate A (1) eap_peap: In SSL Handshake Phase (1) eap_peap: In SSL Accept mode (1) eap_peap: [eaptls process] = handled (1) eap: Sending EAP Request (code 1) ID 3 length 1004 (1) eap: EAP session adding &reply:State = 0xe102a8b5e001b184 (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) # Executing group from file /etc/raddb/sites-enabled/default (1) Challenge { ... } # empty sub-section is ignored (1) Sent Access-Challenge Id 74 from 192.168.99.13:1812 to 192.168.99.2:56759 length 0 (1) EAP-Message = 0x010303ec19c000000aae1603030039020000350303597ef38e2e75a527234143cba2f29969447b46ffca5b869584f926f6ee23572200c03000000dff01000100000b00040300010216030309100b00090c0009090003f7308203f3308202dba003020102020101300d06092a864886f70d01010b050030 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0xe102a8b5e001b184d77738e9a0e9bb1d (1) Finished request Waking up in 3.9 seconds. (2) Received Access-Request Id 75 from 192.168.99.2:56759 to 192.168.99.13:1812 length 204 (2) User-Name = "host/rob-nb-3302.sedlmeier.local" (2) Service-Type = Framed-User (2) Called-Station-Id = "D8-84-66-1C-A0-C2" (2) Calling-Station-Id = "74-2B-62-85-F5-5D" (2) NAS-Identifier = "sed-nw-sw-01.sedlmeier.local" (2) NAS-Port = 5 (2) NAS-Port-Id = "fe.1.5" (2) Framed-MTU = 1500 (2) NAS-Port-Type = Ethernet (2) State = 0xe102a8b5e001b184d77738e9a0e9bb1d (2) EAP-Message = 0x020300061900 (2) NAS-IP-Address = 0.0.0.0 (2) Message-Authenticator = 0xefc96dba675de7807963c0dfd3423d12 (2) session-state: No cached attributes (2) # Executing section authorize from file /etc/raddb/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /(a)\./) { (2) if (&User-Name =~ /(a)\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "host/rob-nb-3302.sedlmeier.local", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) ntdomain: Checking for prefix before "\" (2) ntdomain: No '\' in User-Name = "host/rob-nb-3302.sedlmeier.local", looking up realm NULL (2) ntdomain: No such realm "NULL" (2) [ntdomain] = noop (2) eap: Peer sent EAP Response (code 2) ID 3 length 6 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = eap (2) # Executing group from file /etc/raddb/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0xe102a8b5e001b184 (2) eap: Finished EAP session with state 0xe102a8b5e001b184 (2) eap: Previous EAP request found for state 0xe102a8b5e001b184, released from the list (2) eap: Peer sent packet with method EAP PEAP (25) (2) eap: Calling submodule eap_peap to process data (2) eap_peap: Continuing EAP-TLS (2) eap_peap: Peer ACKed our handshake fragment (2) eap_peap: [eaptls verify] = request (2) eap_peap: [eaptls process] = handled (2) eap: Sending EAP Request (code 1) ID 4 length 1000 (2) eap: EAP session adding &reply:State = 0xe102a8b5e306b184 (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) # Executing group from file /etc/raddb/sites-enabled/default (2) Challenge { ... } # empty sub-section is ignored (2) Sent Access-Challenge Id 75 from 192.168.99.13:1812 to 192.168.99.2:56759 length 0 (2) EAP-Message = 0x010403e8194022518c1dec2cbb2f69d25320c61e68c7f0b7c8b0ae456881bf11f25fb4734527d9e23825158b087c6fd71853cbc94218fa747fbb854f8a6b48583f69cffde05d5cd8c71c2eab8f1cbfd016db9ee4fbfda2bba6b46ea1587e1118771bad825657998f00050c30820508308203f0a0030201 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0xe102a8b5e306b184d77738e9a0e9bb1d (2) Finished request Waking up in 3.9 seconds. (3) Received Access-Request Id 76 from 192.168.99.2:56759 to 192.168.99.13:1812 length 204 (3) User-Name = "host/rob-nb-3302.sedlmeier.local" (3) Service-Type = Framed-User (3) Called-Station-Id = "D8-84-66-1C-A0-C2" (3) Calling-Station-Id = "74-2B-62-85-F5-5D" (3) NAS-Identifier = "sed-nw-sw-01.sedlmeier.local" (3) NAS-Port = 5 (3) NAS-Port-Id = "fe.1.5" (3) Framed-MTU = 1500 (3) NAS-Port-Type = Ethernet (3) State = 0xe102a8b5e306b184d77738e9a0e9bb1d (3) EAP-Message = 0x020400061900 (3) NAS-IP-Address = 0.0.0.0 (3) Message-Authenticator = 0xc72bebe3d29dc863209b5cd48ee982c0 (3) session-state: No cached attributes (3) # Executing section authorize from file /etc/raddb/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /(a)\./) { (3) if (&User-Name =~ /(a)\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "host/rob-nb-3302.sedlmeier.local", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) ntdomain: Checking for prefix before "\" (3) ntdomain: No '\' in User-Name = "host/rob-nb-3302.sedlmeier.local", looking up realm NULL (3) ntdomain: No such realm "NULL" (3) [ntdomain] = noop (3) eap: Peer sent EAP Response (code 2) ID 4 length 6 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /etc/raddb/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0xe102a8b5e306b184 (3) eap: Finished EAP session with state 0xe102a8b5e306b184 (3) eap: Previous EAP request found for state 0xe102a8b5e306b184, released from the list (3) eap: Peer sent packet with method EAP PEAP (25) (3) eap: Calling submodule eap_peap to process data (3) eap_peap: Continuing EAP-TLS (3) eap_peap: Peer ACKed our handshake fragment (3) eap_peap: [eaptls verify] = request (3) eap_peap: [eaptls process] = handled (3) eap: Sending EAP Request (code 1) ID 5 length 752 (3) eap: EAP session adding &reply:State = 0xe102a8b5e207b184 (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) # Executing group from file /etc/raddb/sites-enabled/default (3) Challenge { ... } # empty sub-section is ignored (3) Sent Access-Challenge Id 76 from 192.168.99.13:1812 to 192.168.99.2:56759 length 0 (3) EAP-Message = 0x010502f01900260603550403131f5365646c6d6569657220436572746966696361746520417574686f72697479820900b2c4cbf303d91155300f0603551d130101ff040530030101ff30360603551d1f042f302d302ba029a0278625687474703a2f2f7777772e6578616d706c652e6f72672f6578616d (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0xe102a8b5e207b184d77738e9a0e9bb1d (3) Finished request Waking up in 3.9 seconds. (4) Received Access-Request Id 77 from 192.168.99.2:56760 to 192.168.99.13:1812 length 175 (4) User-Name = "74-2B-62-85-F5-5D" (4) Service-Type = Framed-User (4) Called-Station-Id = "D8-84-66-1C-A0-C2" (4) Calling-Station-Id = "74-2B-62-85-F5-5D" (4) NAS-Identifier = "sed-nw-sw-01.sedlmeier.local" (4) NAS-Port = 5 (4) NAS-Port-Type = Ethernet (4) NAS-Port-Id = "fe.1.5" (4) NAS-IP-Address = 0.0.0.0 (4) User-Password = "NOPASSWORD" (4) Message-Authenticator = 0x0beb8902a9e8cbc749b20a3d7d013e57 (4) # Executing section authorize from file /etc/raddb/sites-enabled/default (4) authorize { (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /(a)\./) { (4) if (&User-Name =~ /(a)\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "74-2B-62-85-F5-5D", looking up realm NULL (4) suffix: No such realm "NULL" (4) [suffix] = noop (4) ntdomain: Checking for prefix before "\" (4) ntdomain: No '\' in User-Name = "74-2B-62-85-F5-5D", looking up realm NULL (4) ntdomain: No such realm "NULL" (4) [ntdomain] = noop (4) eap: No EAP-Message, not doing EAP (4) [eap] = noop (4) files: Searching for user in group "CN=Radius lokal,OU=lokale,OU=Gruppen,OU=spezielle Konten,OU=Mitarbeiter,DC=sedlmeier,DC=local" rlm_ldap (ldap): Reserved connection (0) (4) files: EXPAND (samaccountname=%{%{Stripped-User-Name}:-%{User-Name}}) (4) files: --> (samaccountname=74-2B-62-85-F5-5D) (4) files: Performing search in "OU=Mitarbeiter,DC=sedlmeier,DC=local" with filter "(samaccountname=74-2B-62-85-F5-5D)", scope "sub" (4) files: Waiting for search result... (4) files: Search returned no results rlm_ldap (ldap): Released connection (0) Need 5 more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots used rlm_ldap (ldap): Connecting to ldap://sed-vm-dc-01.sedlmeier.local:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (4) files: users: Matched entry DEFAULT at line 48 (4) [files] = ok rlm_ldap (ldap): Reserved connection (1) (4) ldap: EXPAND (samaccountname=%{%{Stripped-User-Name}:-%{User-Name}}) (4) ldap: --> (samaccountname=74-2B-62-85-F5-5D) (4) ldap: Performing search in "OU=Mitarbeiter,DC=sedlmeier,DC=local" with filter "(samaccountname=74-2B-62-85-F5-5D)", scope "sub" (4) ldap: Waiting for search result... (4) ldap: Search returned no results rlm_ldap (ldap): Released connection (1) (4) [ldap] = notfound (4) [expiration] = noop (4) [logintime] = noop (4) pap: WARNING: Auth-Type already set. Not setting to PAP (4) [pap] = noop (4) } # authorize = ok (4) Found Auth-Type = Reject (4) Auth-Type = Reject, rejecting user (4) Failed to authenticate the user (4) Using Post-Auth-Type Reject (4) # Executing group from file /etc/raddb/sites-enabled/default (4) Post-Auth-Type REJECT { (4) attr_filter.access_reject: EXPAND %{User-Name} (4) attr_filter.access_reject: --> 74-2B-62-85-F5-5D (4) attr_filter.access_reject: Matched entry DEFAULT at line 11 (4) [attr_filter.access_reject] = updated (4) [eap] = noop (4) policy remove_reply_message_if_eap { (4) if (&reply:EAP-Message && &reply:Reply-Message) { (4) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (4) else { (4) [noop] = noop (4) } # else = noop (4) } # policy remove_reply_message_if_eap = noop (4) } # Post-Auth-Type REJECT = updated (4) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (4) Sending delayed response (4) Sent Access-Reject Id 77 from 192.168.99.13:1812 to 192.168.99.2:56760 length 20 Waking up in 1.0 seconds. (0) Cleaning up request packet ID 73 with timestamp +28 Waking up in 1.0 seconds. (1) Cleaning up request packet ID 74 with timestamp +29 (2) Cleaning up request packet ID 75 with timestamp +29 (3) Cleaning up request packet ID 76 with timestamp +29 Waking up in 1.9 seconds. (4) Cleaning up request packet ID 77 with timestamp +31 Ready to process requests (5) Received Access-Request Id 78 from 192.168.99.2:56761 to 192.168.99.13:1812 length 334 (5) User-Name = "host/rob-nb-3302.sedlmeier.local" (5) Service-Type = Framed-User (5) Called-Station-Id = "D8-84-66-1C-A0-C2" (5) Calling-Station-Id = "74-2B-62-85-F5-5D" (5) NAS-Identifier = "sed-nw-sw-01.sedlmeier.local" (5) NAS-Port = 5 (5) NAS-Port-Id = "fe.1.5" (5) Framed-MTU = 1500 (5) NAS-Port-Type = Ethernet (5) State = 0xe102a8b5e207b184d77738e9a0e9bb1d (5) EAP-Message = 0x0205008819800000007e160303004610000042410459577e7f63893e12439d89ef7762dad67749be48f7e06e4798b09f06a920a47cf785564d5fd7220bb11a3f2f7395c2c8c698f67528e9750d194e81d0046fa3211403030001011603030028000000000000000044f35649eebe0522c431f1c3773c53 (5) NAS-IP-Address = 0.0.0.0 (5) Message-Authenticator = 0x4a79037a8376770b58ea48e0122addc7 (5) session-state: No cached attributes (5) # Executing section authorize from file /etc/raddb/sites-enabled/default (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /(a)\./) { (5) if (&User-Name =~ /(a)\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) [chap] = noop (5) [mschap] = noop (5) [digest] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "host/rob-nb-3302.sedlmeier.local", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) ntdomain: Checking for prefix before "\" (5) ntdomain: No '\' in User-Name = "host/rob-nb-3302.sedlmeier.local", looking up realm NULL (5) ntdomain: No such realm "NULL" (5) [ntdomain] = noop (5) eap: Peer sent EAP Response (code 2) ID 5 length 136 (5) eap: Continuing tunnel setup (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /etc/raddb/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0xe102a8b5e207b184 (5) eap: Finished EAP session with state 0xe102a8b5e207b184 (5) eap: Previous EAP request found for state 0xe102a8b5e207b184, released from the list (5) eap: Peer sent packet with method EAP PEAP (25) (5) eap: Calling submodule eap_peap to process data (5) eap_peap: Continuing EAP-TLS (5) eap_peap: Peer indicated complete TLS record size will be 126 bytes (5) eap_peap: Got complete TLS record (126 bytes) (5) eap_peap: [eaptls verify] = length included (5) eap_peap: <<< recv TLS 1.2 [length 0046] (5) eap_peap: TLS_accept: SSLv3 read client key exchange A (5) eap_peap: <<< recv TLS 1.2 [length 0001] (5) eap_peap: <<< recv TLS 1.2 [length 0010] (5) eap_peap: TLS_accept: SSLv3 read finished A (5) eap_peap: >>> send TLS 1.2 [length 0001] (5) eap_peap: TLS_accept: SSLv3 write change cipher spec A (5) eap_peap: >>> send TLS 1.2 [length 0010] (5) eap_peap: TLS_accept: SSLv3 write finished A (5) eap_peap: TLS_accept: SSLv3 flush data (5) eap_peap: (other): SSL negotiation finished successfully (5) eap_peap: SSL Connection Established (5) eap_peap: [eaptls process] = handled (5) eap: Sending EAP Request (code 1) ID 6 length 57 (5) eap: EAP session adding &reply:State = 0xe102a8b5e504b184 (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) # Executing group from file /etc/raddb/sites-enabled/default (5) Challenge { ... } # empty sub-section is ignored (5) Sent Access-Challenge Id 78 from 192.168.99.13:1812 to 192.168.99.2:56761 length 0 (5) EAP-Message = 0x01060039190014030300010116030300284cc3e20a68955d07f6d14e1174f4d7e3213ca011d95b07b99cdabfdaee2088c3000f9d130635ebac (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0xe102a8b5e504b184d77738e9a0e9bb1d (5) Finished request Waking up in 4.9 seconds. (6) Received Access-Request Id 79 from 192.168.99.2:56762 to 192.168.99.13:1812 length 179 (6) User-Name = "SEDLMEIER\\iah" (6) Service-Type = Framed-User (6) Called-Station-Id = "D8-84-66-1C-A0-C2" (6) Calling-Station-Id = "74-2B-62-85-F5-5D" (6) NAS-Identifier = "sed-nw-sw-01.sedlmeier.local" (6) NAS-Port = 5 (6) NAS-Port-Id = "fe.1.5" (6) Framed-MTU = 1500 (6) NAS-Port-Type = Ethernet (6) EAP-Message = 0x02020012015345444c4d454945525c696168 (6) NAS-IP-Address = 0.0.0.0 (6) Message-Authenticator = 0x818fa39dfffe9c77183d6e2de38d755b (6) # Executing section authorize from file /etc/raddb/sites-enabled/default (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /(a)\./) { (6) if (&User-Name =~ /(a)\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [preprocess] = ok (6) [chap] = noop (6) [mschap] = noop (6) [digest] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "SEDLMEIER\iah", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) ntdomain: Checking for prefix before "\" (6) ntdomain: Looking up realm "SEDLMEIER" for User-Name = "SEDLMEIER\iah" (6) ntdomain: Found realm "SEDLMEIER" (6) ntdomain: Adding Stripped-User-Name = "iah" (6) ntdomain: Adding Realm = "SEDLMEIER" (6) ntdomain: Authentication realm is LOCAL (6) [ntdomain] = ok (6) eap: Peer sent EAP Response (code 2) ID 2 length 18 (6) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /etc/raddb/sites-enabled/default (6) authenticate { (6) eap: Peer sent packet with method EAP Identity (1) (6) eap: Calling submodule eap_peap to process data (6) eap_peap: Initiating new EAP-TLS session (6) eap_peap: [eaptls start] = request (6) eap: Sending EAP Request (code 1) ID 3 length 6 (6) eap: EAP session adding &reply:State = 0x5c12086c5c1111e3 (6) [eap] = handled (6) } # authenticate = handled (6) Using Post-Auth-Type Challenge (6) # Executing group from file /etc/raddb/sites-enabled/default (6) Challenge { ... } # empty sub-section is ignored (6) Sent Access-Challenge Id 79 from 192.168.99.13:1812 to 192.168.99.2:56762 length 0 (6) EAP-Message = 0x010300061920 (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0x5c12086c5c1111e339ba0cfb20b713d6 (6) Finished request Waking up in 1.1 seconds. (7) Received Access-Request Id 80 from 192.168.99.2:56762 to 192.168.99.13:1812 length 349 (7) User-Name = "SEDLMEIER\\iah" (7) Service-Type = Framed-User (7) Called-Station-Id = "D8-84-66-1C-A0-C2" (7) Calling-Station-Id = "74-2B-62-85-F5-5D" (7) NAS-Identifier = "sed-nw-sw-01.sedlmeier.local" (7) NAS-Port = 5 (7) NAS-Port-Id = "fe.1.5" (7) Framed-MTU = 1500 (7) NAS-Port-Type = Ethernet (7) State = 0x5c12086c5c1111e339ba0cfb20b713d6 (7) EAP-Message = 0x020300aa1980000000a0160303009b010000970303597ef3af9297418508522f64df28c68dac427ff745468f6dfd57682f35d5132700002ec02cc02bc030c02f009f009ec024c023c028c027c00ac009c014c013009d009c003d003c0035002f000a0005000401000040000500050100000000000a0008 (7) NAS-IP-Address = 0.0.0.0 (7) Message-Authenticator = 0x97a8f22303c5ea6c0e824b9e8a1b0aed (7) session-state: No cached attributes (7) # Executing section authorize from file /etc/raddb/sites-enabled/default (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /(a)\./) { (7) if (&User-Name =~ /(a)\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [preprocess] = ok (7) [chap] = noop (7) [mschap] = noop (7) [digest] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "SEDLMEIER\iah", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) ntdomain: Checking for prefix before "\" (7) ntdomain: Looking up realm "SEDLMEIER" for User-Name = "SEDLMEIER\iah" (7) ntdomain: Found realm "SEDLMEIER" (7) ntdomain: Adding Stripped-User-Name = "iah" (7) ntdomain: Adding Realm = "SEDLMEIER" (7) ntdomain: Authentication realm is LOCAL (7) [ntdomain] = ok (7) eap: Peer sent EAP Response (code 2) ID 3 length 170 (7) eap: Continuing tunnel setup (7) [eap] = ok (7) } # authorize = ok (7) Found Auth-Type = eap (7) # Executing group from file /etc/raddb/sites-enabled/default (7) authenticate { (7) eap: Expiring EAP session with state 0xe102a8b5e504b184 (7) eap: Finished EAP session with state 0x5c12086c5c1111e3 (7) eap: Previous EAP request found for state 0x5c12086c5c1111e3, released from the list (7) eap: Peer sent packet with method EAP PEAP (25) (7) eap: Calling submodule eap_peap to process data (7) eap_peap: Continuing EAP-TLS (7) eap_peap: Peer indicated complete TLS record size will be 160 bytes (7) eap_peap: Got complete TLS record (160 bytes) (7) eap_peap: [eaptls verify] = length included (7) eap_peap: (other): before/accept initialization (7) eap_peap: TLS_accept: before/accept initialization (7) eap_peap: <<< recv TLS 1.2 [length 009b] (7) eap_peap: TLS_accept: SSLv3 read client hello A (7) eap_peap: >>> send TLS 1.2 [length 0039] (7) eap_peap: TLS_accept: SSLv3 write server hello A (7) eap_peap: >>> send TLS 1.2 [length 0910] (7) eap_peap: TLS_accept: SSLv3 write certificate A (7) eap_peap: >>> send TLS 1.2 [length 014d] (7) eap_peap: TLS_accept: SSLv3 write key exchange A (7) eap_peap: >>> send TLS 1.2 [length 0004] (7) eap_peap: TLS_accept: SSLv3 write server done A (7) eap_peap: TLS_accept: SSLv3 flush data (7) eap_peap: TLS_accept: Need to read more data: SSLv3 read client certificate A (7) eap_peap: TLS_accept: Need to read more data: SSLv3 read client certificate A (7) eap_peap: In SSL Handshake Phase (7) eap_peap: In SSL Accept mode (7) eap_peap: [eaptls process] = handled (7) eap: Sending EAP Request (code 1) ID 4 length 1004 (7) eap: EAP session adding &reply:State = 0x5c12086c5d1611e3 (7) [eap] = handled (7) } # authenticate = handled (7) Using Post-Auth-Type Challenge (7) # Executing group from file /etc/raddb/sites-enabled/default (7) Challenge { ... } # empty sub-section is ignored (7) Sent Access-Challenge Id 80 from 192.168.99.13:1812 to 192.168.99.2:56762 length 0 (7) EAP-Message = 0x010403ec19c000000aae1603030039020000350303597ef3aea467f059676c2603a5b2dc766323afffc5e40ce4949e372f640afdc500c03000000dff01000100000b00040300010216030309100b00090c0009090003f7308203f3308202dba003020102020101300d06092a864886f70d01010b050030 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0x5c12086c5d1611e339ba0cfb20b713d6 (7) Finished request Waking up in 0.2 seconds. (8) Received Access-Request Id 81 from 192.168.99.2:56762 to 192.168.99.13:1812 length 185 (8) User-Name = "SEDLMEIER\\iah" (8) Service-Type = Framed-User (8) Called-Station-Id = "D8-84-66-1C-A0-C2" (8) Calling-Station-Id = "74-2B-62-85-F5-5D" (8) NAS-Identifier = "sed-nw-sw-01.sedlmeier.local" (8) NAS-Port = 5 (8) NAS-Port-Id = "fe.1.5" (8) Framed-MTU = 1500 (8) NAS-Port-Type = Ethernet (8) State = 0x5c12086c5d1611e339ba0cfb20b713d6 (8) EAP-Message = 0x020400061900 (8) NAS-IP-Address = 0.0.0.0 (8) Message-Authenticator = 0x2fa5145d6891b5151d53b6b1094c19c5 (8) session-state: No cached attributes (8) # Executing section authorize from file /etc/raddb/sites-enabled/default (8) authorize { (8) policy filter_username { (8) if (&User-Name) { (8) if (&User-Name) -> TRUE (8) if (&User-Name) { (8) if (&User-Name =~ / /) { (8) if (&User-Name =~ / /) -> FALSE (8) if (&User-Name =~ /@[^@]*@/ ) { (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (8) if (&User-Name =~ /\.\./ ) { (8) if (&User-Name =~ /\.\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\.$/) { (8) if (&User-Name =~ /\.$/) -> FALSE (8) if (&User-Name =~ /(a)\./) { (8) if (&User-Name =~ /(a)\./) -> FALSE (8) } # if (&User-Name) = notfound (8) } # policy filter_username = notfound (8) [preprocess] = ok (8) [chap] = noop (8) [mschap] = noop (8) [digest] = noop (8) suffix: Checking for suffix after "@" (8) suffix: No '@' in User-Name = "SEDLMEIER\iah", looking up realm NULL (8) suffix: No such realm "NULL" (8) [suffix] = noop (8) ntdomain: Checking for prefix before "\" (8) ntdomain: Looking up realm "SEDLMEIER" for User-Name = "SEDLMEIER\iah" (8) ntdomain: Found realm "SEDLMEIER" (8) ntdomain: Adding Stripped-User-Name = "iah" (8) ntdomain: Adding Realm = "SEDLMEIER" (8) ntdomain: Authentication realm is LOCAL (8) [ntdomain] = ok (8) eap: Peer sent EAP Response (code 2) ID 4 length 6 (8) eap: Continuing tunnel setup (8) [eap] = ok (8) } # authorize = ok (8) Found Auth-Type = eap (8) # Executing group from file /etc/raddb/sites-enabled/default (8) authenticate { (8) eap: Expiring EAP session with state 0xe102a8b5e504b184 (8) eap: Finished EAP session with state 0x5c12086c5d1611e3 (8) eap: Previous EAP request found for state 0x5c12086c5d1611e3, released from the list (8) eap: Peer sent packet with method EAP PEAP (25) (8) eap: Calling submodule eap_peap to process data (8) eap_peap: Continuing EAP-TLS (8) eap_peap: Peer ACKed our handshake fragment (8) eap_peap: [eaptls verify] = request (8) eap_peap: [eaptls process] = handled (8) eap: Sending EAP Request (code 1) ID 5 length 1000 (8) eap: EAP session adding &reply:State = 0x5c12086c5e1711e3 (8) [eap] = handled (8) } # authenticate = handled (8) Using Post-Auth-Type Challenge (8) # Executing group from file /etc/raddb/sites-enabled/default (8) Challenge { ... } # empty sub-section is ignored (8) Sent Access-Challenge Id 81 from 192.168.99.13:1812 to 192.168.99.2:56762 length 0 (8) EAP-Message = 0x010503e8194022518c1dec2cbb2f69d25320c61e68c7f0b7c8b0ae456881bf11f25fb4734527d9e23825158b087c6fd71853cbc94218fa747fbb854f8a6b48583f69cffde05d5cd8c71c2eab8f1cbfd016db9ee4fbfda2bba6b46ea1587e1118771bad825657998f00050c30820508308203f0a0030201 (8) Message-Authenticator = 0x00000000000000000000000000000000 (8) State = 0x5c12086c5e1711e339ba0cfb20b713d6 (8) Finished request Waking up in 0.1 seconds. (9) Received Access-Request Id 82 from 192.168.99.2:56762 to 192.168.99.13:1812 length 185 (9) User-Name = "SEDLMEIER\\iah" (9) Service-Type = Framed-User (9) Called-Station-Id = "D8-84-66-1C-A0-C2" (9) Calling-Station-Id = "74-2B-62-85-F5-5D" (9) NAS-Identifier = "sed-nw-sw-01.sedlmeier.local" (9) NAS-Port = 5 (9) NAS-Port-Id = "fe.1.5" (9) Framed-MTU = 1500 (9) NAS-Port-Type = Ethernet (9) State = 0x5c12086c5e1711e339ba0cfb20b713d6 (9) EAP-Message = 0x020500061900 (9) NAS-IP-Address = 0.0.0.0 (9) Message-Authenticator = 0x2232c98584da081f74bfd46238c649a6 (9) session-state: No cached attributes (9) # Executing section authorize from file /etc/raddb/sites-enabled/default (9) authorize { (9) policy filter_username { (9) if (&User-Name) { (9) if (&User-Name) -> TRUE (9) if (&User-Name) { (9) if (&User-Name =~ / /) { (9) if (&User-Name =~ / /) -> FALSE (9) if (&User-Name =~ /@[^@]*@/ ) { (9) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (9) if (&User-Name =~ /\.\./ ) { (9) if (&User-Name =~ /\.\./ ) -> FALSE (9) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (9) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (9) if (&User-Name =~ /\.$/) { (9) if (&User-Name =~ /\.$/) -> FALSE (9) if (&User-Name =~ /(a)\./) { (9) if (&User-Name =~ /(a)\./) -> FALSE (9) } # if (&User-Name) = notfound (9) } # policy filter_username = notfound (9) [preprocess] = ok (9) [chap] = noop (9) [mschap] = noop (9) [digest] = noop (9) suffix: Checking for suffix after "@" (9) suffix: No '@' in User-Name = "SEDLMEIER\iah", looking up realm NULL (9) suffix: No such realm "NULL" (9) [suffix] = noop (9) ntdomain: Checking for prefix before "\" (9) ntdomain: Looking up realm "SEDLMEIER" for User-Name = "SEDLMEIER\iah" (9) ntdomain: Found realm "SEDLMEIER" (9) ntdomain: Adding Stripped-User-Name = "iah" (9) ntdomain: Adding Realm = "SEDLMEIER" (9) ntdomain: Authentication realm is LOCAL (9) [ntdomain] = ok (9) eap: Peer sent EAP Response (code 2) ID 5 length 6 (9) eap: Continuing tunnel setup (9) [eap] = ok (9) } # authorize = ok (9) Found Auth-Type = eap (9) # Executing group from file /etc/raddb/sites-enabled/default (9) authenticate { (9) eap: Expiring EAP session with state 0xe102a8b5e504b184 (9) eap: Finished EAP session with state 0x5c12086c5e1711e3 (9) eap: Previous EAP request found for state 0x5c12086c5e1711e3, released from the list (9) eap: Peer sent packet with method EAP PEAP (25) (9) eap: Calling submodule eap_peap to process data (9) eap_peap: Continuing EAP-TLS (9) eap_peap: Peer ACKed our handshake fragment (9) eap_peap: [eaptls verify] = request (9) eap_peap: [eaptls process] = handled (9) eap: Sending EAP Request (code 1) ID 6 length 752 (9) eap: EAP session adding &reply:State = 0x5c12086c5f1411e3 (9) [eap] = handled (9) } # authenticate = handled (9) Using Post-Auth-Type Challenge (9) # Executing group from file /etc/raddb/sites-enabled/default (9) Challenge { ... } # empty sub-section is ignored (9) Sent Access-Challenge Id 82 from 192.168.99.13:1812 to 192.168.99.2:56762 length 0 (9) EAP-Message = 0x010602f01900260603550403131f5365646c6d6569657220436572746966696361746520417574686f72697479820900b2c4cbf303d91155300f0603551d130101ff040530030101ff30360603551d1f042f302d302ba029a0278625687474703a2f2f7777772e6578616d706c652e6f72672f6578616d (9) Message-Authenticator = 0x00000000000000000000000000000000 (9) State = 0x5c12086c5f1411e339ba0cfb20b713d6 (9) Finished request Waking up in 0.1 seconds. (10) Received Access-Request Id 83 from 192.168.99.2:56762 to 192.168.99.13:1812 length 315 (10) User-Name = "SEDLMEIER\\iah" (10) Service-Type = Framed-User (10) Called-Station-Id = "D8-84-66-1C-A0-C2" (10) Calling-Station-Id = "74-2B-62-85-F5-5D" (10) NAS-Identifier = "sed-nw-sw-01.sedlmeier.local" (10) NAS-Port = 5 (10) NAS-Port-Id = "fe.1.5" (10) Framed-MTU = 1500 (10) NAS-Port-Type = Ethernet (10) State = 0x5c12086c5f1411e339ba0cfb20b713d6 (10) EAP-Message = 0x0206008819800000007e16030300461000004241049c2e77d6fcc8cdca527b6a1ec38a7f6f2051615194c3105208b13f10613e8e52ff33d0b56a501b57117d9b5e1741b10d41ccd01e9b01944566873455ca522b911403030001011603030028000000000000000075256bb4eee5e1fbb9e017d492512f (10) NAS-IP-Address = 0.0.0.0 (10) Message-Authenticator = 0x08422fb47023c883ae6834405b9141b8 (10) session-state: No cached attributes (10) # Executing section authorize from file /etc/raddb/sites-enabled/default (10) authorize { (10) policy filter_username { (10) if (&User-Name) { (10) if (&User-Name) -> TRUE (10) if (&User-Name) { (10) if (&User-Name =~ / /) { (10) if (&User-Name =~ / /) -> FALSE (10) if (&User-Name =~ /@[^@]*@/ ) { (10) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (10) if (&User-Name =~ /\.\./ ) { (10) if (&User-Name =~ /\.\./ ) -> FALSE (10) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (10) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (10) if (&User-Name =~ /\.$/) { (10) if (&User-Name =~ /\.$/) -> FALSE (10) if (&User-Name =~ /(a)\./) { (10) if (&User-Name =~ /(a)\./) -> FALSE (10) } # if (&User-Name) = notfound (10) } # policy filter_username = notfound (10) [preprocess] = ok (10) [chap] = noop (10) [mschap] = noop (10) [digest] = noop (10) suffix: Checking for suffix after "@" (10) suffix: No '@' in User-Name = "SEDLMEIER\iah", looking up realm NULL (10) suffix: No such realm "NULL" (10) [suffix] = noop (10) ntdomain: Checking for prefix before "\" (10) ntdomain: Looking up realm "SEDLMEIER" for User-Name = "SEDLMEIER\iah" (10) ntdomain: Found realm "SEDLMEIER" (10) ntdomain: Adding Stripped-User-Name = "iah" (10) ntdomain: Adding Realm = "SEDLMEIER" (10) ntdomain: Authentication realm is LOCAL (10) [ntdomain] = ok (10) eap: Peer sent EAP Response (code 2) ID 6 length 136 (10) eap: Continuing tunnel setup (10) [eap] = ok (10) } # authorize = ok (10) Found Auth-Type = eap (10) # Executing group from file /etc/raddb/sites-enabled/default (10) authenticate { (10) eap: Expiring EAP session with state 0xe102a8b5e504b184 (10) eap: Finished EAP session with state 0x5c12086c5f1411e3 (10) eap: Previous EAP request found for state 0x5c12086c5f1411e3, released from the list (10) eap: Peer sent packet with method EAP PEAP (25) (10) eap: Calling submodule eap_peap to process data (10) eap_peap: Continuing EAP-TLS (10) eap_peap: Peer indicated complete TLS record size will be 126 bytes (10) eap_peap: Got complete TLS record (126 bytes) (10) eap_peap: [eaptls verify] = length included (10) eap_peap: <<< recv TLS 1.2 [length 0046] (10) eap_peap: TLS_accept: SSLv3 read client key exchange A (10) eap_peap: <<< recv TLS 1.2 [length 0001] (10) eap_peap: <<< recv TLS 1.2 [length 0010] (10) eap_peap: TLS_accept: SSLv3 read finished A (10) eap_peap: >>> send TLS 1.2 [length 0001] (10) eap_peap: TLS_accept: SSLv3 write change cipher spec A (10) eap_peap: >>> send TLS 1.2 [length 0010] (10) eap_peap: TLS_accept: SSLv3 write finished A (10) eap_peap: TLS_accept: SSLv3 flush data (10) eap_peap: (other): SSL negotiation finished successfully (10) eap_peap: SSL Connection Established (10) eap_peap: [eaptls process] = handled (10) eap: Sending EAP Request (code 1) ID 7 length 57 (10) eap: EAP session adding &reply:State = 0x5c12086c581511e3 (10) [eap] = handled (10) } # authenticate = handled (10) Using Post-Auth-Type Challenge (10) # Executing group from file /etc/raddb/sites-enabled/default (10) Challenge { ... } # empty sub-section is ignored (10) Sent Access-Challenge Id 83 from 192.168.99.13:1812 to 192.168.99.2:56762 length 0 (10) EAP-Message = 0x010700391900140303000101160303002851bcfc40abac086065a05953d280fd982896b0423fcc9ea154fe46ffb652a382e869902394c3d1f3 (10) Message-Authenticator = 0x00000000000000000000000000000000 (10) State = 0x5c12086c581511e339ba0cfb20b713d6 (10) Finished request Waking up in 0.1 seconds. (5) Cleaning up request packet ID 78 with timestamp +56 Waking up in 3.8 seconds. (11) Received Access-Request Id 84 from 192.168.99.2:56763 to 192.168.99.13:1812 length 175 (11) User-Name = "74-2B-62-85-F5-5D" (11) Service-Type = Framed-User (11) Called-Station-Id = "D8-84-66-1C-A0-C2" (11) Calling-Station-Id = "74-2B-62-85-F5-5D" (11) NAS-Identifier = "sed-nw-sw-01.sedlmeier.local" (11) NAS-Port = 5 (11) NAS-Port-Type = Ethernet (11) NAS-Port-Id = "fe.1.5" (11) NAS-IP-Address = 0.0.0.0 (11) User-Password = "NOPASSWORD" (11) Message-Authenticator = 0x6f080d4ccbf6f5ca720db06ca1ded019 (11) # Executing section authorize from file /etc/raddb/sites-enabled/default (11) authorize { (11) policy filter_username { (11) if (&User-Name) { (11) if (&User-Name) -> TRUE (11) if (&User-Name) { (11) if (&User-Name =~ / /) { (11) if (&User-Name =~ / /) -> FALSE (11) if (&User-Name =~ /@[^@]*@/ ) { (11) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (11) if (&User-Name =~ /\.\./ ) { (11) if (&User-Name =~ /\.\./ ) -> FALSE (11) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (11) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (11) if (&User-Name =~ /\.$/) { (11) if (&User-Name =~ /\.$/) -> FALSE (11) if (&User-Name =~ /(a)\./) { (11) if (&User-Name =~ /(a)\./) -> FALSE (11) } # if (&User-Name) = notfound (11) } # policy filter_username = notfound (11) [preprocess] = ok (11) [chap] = noop (11) [mschap] = noop (11) [digest] = noop (11) suffix: Checking for suffix after "@" (11) suffix: No '@' in User-Name = "74-2B-62-85-F5-5D", looking up realm NULL (11) suffix: No such realm "NULL" (11) [suffix] = noop (11) ntdomain: Checking for prefix before "\" (11) ntdomain: No '\' in User-Name = "74-2B-62-85-F5-5D", looking up realm NULL (11) ntdomain: No such realm "NULL" (11) [ntdomain] = noop (11) eap: No EAP-Message, not doing EAP (11) [eap] = noop (11) files: Searching for user in group "CN=Radius lokal,OU=lokale,OU=Gruppen,OU=spezielle Konten,OU=Mitarbeiter,DC=sedlmeier,DC=local" rlm_ldap (ldap): Closing connection (2): Hit idle_timeout, was idle for 63 seconds rlm_ldap (ldap): Closing connection (3): Hit idle_timeout, was idle for 63 seconds rlm_ldap (ldap): Closing connection (4): Hit idle_timeout, was idle for 63 seconds rlm_ldap (ldap): Reserved connection (0) (11) files: EXPAND (samaccountname=%{%{Stripped-User-Name}:-%{User-Name}}) (11) files: --> (samaccountname=74-2B-62-85-F5-5D) (11) files: Performing search in "OU=Mitarbeiter,DC=sedlmeier,DC=local" with filter "(samaccountname=74-2B-62-85-F5-5D)", scope "sub" (11) files: Waiting for search result... (11) files: Search returned no results rlm_ldap (ldap): Released connection (0) Need 7 more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (6), 1 of 29 pending slots used rlm_ldap (ldap): Connecting to ldap://sed-vm-dc-01.sedlmeier.local:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (11) files: users: Matched entry DEFAULT at line 48 (11) [files] = ok rlm_ldap (ldap): Reserved connection (5) (11) ldap: EXPAND (samaccountname=%{%{Stripped-User-Name}:-%{User-Name}}) (11) ldap: --> (samaccountname=74-2B-62-85-F5-5D) (11) ldap: Performing search in "OU=Mitarbeiter,DC=sedlmeier,DC=local" with filter "(samaccountname=74-2B-62-85-F5-5D)", scope "sub" (11) ldap: Waiting for search result... (11) ldap: Search returned no results rlm_ldap (ldap): Released connection (5) (11) [ldap] = notfound (11) [expiration] = noop (11) [logintime] = noop (11) pap: WARNING: Auth-Type already set. Not setting to PAP (11) [pap] = noop (11) } # authorize = ok (11) Found Auth-Type = Reject (11) Auth-Type = Reject, rejecting user (11) Failed to authenticate the user (11) Using Post-Auth-Type Reject (11) # Executing group from file /etc/raddb/sites-enabled/default (11) Post-Auth-Type REJECT { (11) attr_filter.access_reject: EXPAND %{User-Name} (11) attr_filter.access_reject: --> 74-2B-62-85-F5-5D (11) attr_filter.access_reject: Matched entry DEFAULT at line 11 (11) [attr_filter.access_reject] = updated (11) [eap] = noop (11) policy remove_reply_message_if_eap { (11) if (&reply:EAP-Message && &reply:Reply-Message) { (11) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (11) else { (11) [noop] = noop (11) } # else = noop (11) } # policy remove_reply_message_if_eap = noop (11) } # Post-Auth-Type REJECT = updated (11) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (11) Sending delayed response (11) Sent Access-Reject Id 84 from 192.168.99.13:1812 to 192.168.99.2:56763 length 20 Waking up in 1.1 seconds. (6) Cleaning up request packet ID 79 with timestamp +60 Waking up in 0.9 seconds. (7) Cleaning up request packet ID 80 with timestamp +61 (8) Cleaning up request packet ID 81 with timestamp +61 (9) Cleaning up request packet ID 82 with timestamp +61 (10) Cleaning up request packet ID 83 with timestamp +61 Waking up in 1.8 seconds. (11) Cleaning up request packet ID 84 with timestamp +63 Ready to process requests (12) Received Access-Request Id 85 from 192.168.99.2:56764 to 192.168.99.13:1812 length 175 (12) User-Name = "74-2B-62-85-F5-5D" (12) Service-Type = Framed-User (12) Called-Station-Id = "D8-84-66-1C-A0-C2" (12) Calling-Station-Id = "74-2B-62-85-F5-5D" (12) NAS-Identifier = "sed-nw-sw-01.sedlmeier.local" (12) NAS-Port = 5 (12) NAS-Port-Type = Ethernet (12) NAS-Port-Id = "fe.1.5" (12) NAS-IP-Address = 0.0.0.0 (12) User-Password = "NOPASSWORD" (12) Message-Authenticator = 0xeec36b77f7b50adfba1207e2034ef1a1 (12) # Executing section authorize from file /etc/raddb/sites-enabled/default (12) authorize { (12) policy filter_username { (12) if (&User-Name) { (12) if (&User-Name) -> TRUE (12) if (&User-Name) { (12) if (&User-Name =~ / /) { (12) if (&User-Name =~ / /) -> FALSE (12) if (&User-Name =~ /@[^@]*@/ ) { (12) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (12) if (&User-Name =~ /\.\./ ) { (12) if (&User-Name =~ /\.\./ ) -> FALSE (12) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (12) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (12) if (&User-Name =~ /\.$/) { (12) if (&User-Name =~ /\.$/) -> FALSE (12) if (&User-Name =~ /(a)\./) { (12) if (&User-Name =~ /(a)\./) -> FALSE (12) } # if (&User-Name) = notfound (12) } # policy filter_username = notfound (12) [preprocess] = ok (12) [chap] = noop (12) [mschap] = noop (12) [digest] = noop (12) suffix: Checking for suffix after "@" (12) suffix: No '@' in User-Name = "74-2B-62-85-F5-5D", looking up realm NULL (12) suffix: No such realm "NULL" (12) [suffix] = noop (12) ntdomain: Checking for prefix before "\" (12) ntdomain: No '\' in User-Name = "74-2B-62-85-F5-5D", looking up realm NULL (12) ntdomain: No such realm "NULL" (12) [ntdomain] = noop (12) eap: No EAP-Message, not doing EAP (12) [eap] = noop (12) files: Searching for user in group "CN=Radius lokal,OU=lokale,OU=Gruppen,OU=spezielle Konten,OU=Mitarbeiter,DC=sedlmeier,DC=local" rlm_ldap (ldap): Closing connection (1): Hit idle_timeout, was idle for 64 seconds rlm_ldap (ldap): Reserved connection (0) (12) files: EXPAND (samaccountname=%{%{Stripped-User-Name}:-%{User-Name}}) (12) files: --> (samaccountname=74-2B-62-85-F5-5D) (12) files: Performing search in "OU=Mitarbeiter,DC=sedlmeier,DC=local" with filter "(samaccountname=74-2B-62-85-F5-5D)", scope "sub" (12) files: Waiting for search result... (12) files: Search returned no results rlm_ldap (ldap): Released connection (0) Need 7 more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (7), 1 of 29 pending slots used rlm_ldap (ldap): Connecting to ldap://sed-vm-dc-01.sedlmeier.local:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (12) files: users: Matched entry DEFAULT at line 48 (12) [files] = ok rlm_ldap (ldap): Reserved connection (6) (12) ldap: EXPAND (samaccountname=%{%{Stripped-User-Name}:-%{User-Name}}) (12) ldap: --> (samaccountname=74-2B-62-85-F5-5D) (12) ldap: Performing search in "OU=Mitarbeiter,DC=sedlmeier,DC=local" with filter "(samaccountname=74-2B-62-85-F5-5D)", scope "sub" (12) ldap: Waiting for search result... (12) ldap: Search returned no results rlm_ldap (ldap): Released connection (6) (12) [ldap] = notfound (12) [expiration] = noop (12) [logintime] = noop (12) pap: WARNING: Auth-Type already set. Not setting to PAP (12) [pap] = noop (12) } # authorize = ok (12) Found Auth-Type = Reject (12) Auth-Type = Reject, rejecting user (12) Failed to authenticate the user (12) Using Post-Auth-Type Reject (12) # Executing group from file /etc/raddb/sites-enabled/default (12) Post-Auth-Type REJECT { (12) attr_filter.access_reject: EXPAND %{User-Name} (12) attr_filter.access_reject: --> 74-2B-62-85-F5-5D (12) attr_filter.access_reject: Matched entry DEFAULT at line 11 (12) [attr_filter.access_reject] = updated (12) [eap] = noop (12) policy remove_reply_message_if_eap { (12) if (&reply:EAP-Message && &reply:Reply-Message) { (12) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (12) else { (12) [noop] = noop (12) } # else = noop (12) } # policy remove_reply_message_if_eap = noop (12) } # Post-Auth-Type REJECT = updated (12) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (12) Sending delayed response (12) Sent Access-Reject Id 85 from 192.168.99.13:1812 to 192.168.99.2:56764 length 20 Waking up in 3.9 seconds. (12) Cleaning up request packet ID 85 with timestamp +95 Ready to process requests (13) Received Access-Request Id 86 from 192.168.99.2:56765 to 192.168.99.13:1812 length 179 (13) User-Name = "SEDLMEIER\\iah" (13) Service-Type = Framed-User (13) Called-Station-Id = "D8-84-66-1C-A0-C2" (13) Calling-Station-Id = "74-2B-62-85-F5-5D" (13) NAS-Identifier = "sed-nw-sw-01.sedlmeier.local" (13) NAS-Port = 5 (13) NAS-Port-Id = "fe.1.5" (13) Framed-MTU = 1500 (13) NAS-Port-Type = Ethernet (13) EAP-Message = 0x02080012015345444c4d454945525c696168 (13) NAS-IP-Address = 0.0.0.0 (13) Message-Authenticator = 0x1b1d08e528d4d368c7099e9a07b3ecf5 (13) # Executing section authorize from file /etc/raddb/sites-enabled/default (13) authorize { (13) policy filter_username { (13) if (&User-Name) { (13) if (&User-Name) -> TRUE (13) if (&User-Name) { (13) if (&User-Name =~ / /) { (13) if (&User-Name =~ / /) -> FALSE (13) if (&User-Name =~ /@[^@]*@/ ) { (13) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (13) if (&User-Name =~ /\.\./ ) { (13) if (&User-Name =~ /\.\./ ) -> FALSE (13) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (13) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (13) if (&User-Name =~ /\.$/) { (13) if (&User-Name =~ /\.$/) -> FALSE (13) if (&User-Name =~ /(a)\./) { (13) if (&User-Name =~ /(a)\./) -> FALSE (13) } # if (&User-Name) = notfound (13) } # policy filter_username = notfound (13) [preprocess] = ok (13) [chap] = noop (13) [mschap] = noop (13) [digest] = noop (13) suffix: Checking for suffix after "@" (13) suffix: No '@' in User-Name = "SEDLMEIER\iah", looking up realm NULL (13) suffix: No such realm "NULL" (13) [suffix] = noop (13) ntdomain: Checking for prefix before "\" (13) ntdomain: Looking up realm "SEDLMEIER" for User-Name = "SEDLMEIER\iah" (13) ntdomain: Found realm "SEDLMEIER" (13) ntdomain: Adding Stripped-User-Name = "iah" (13) ntdomain: Adding Realm = "SEDLMEIER" (13) ntdomain: Authentication realm is LOCAL (13) [ntdomain] = ok (13) eap: Peer sent EAP Response (code 2) ID 8 length 18 (13) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (13) [eap] = ok (13) } # authorize = ok (13) Found Auth-Type = eap (13) # Executing group from file /etc/raddb/sites-enabled/default (13) authenticate { (13) eap: Peer sent packet with method EAP Identity (1) (13) eap: Calling submodule eap_peap to process data (13) eap_peap: Initiating new EAP-TLS session (13) eap_peap: [eaptls start] = request (13) eap: Sending EAP Request (code 1) ID 9 length 6 (13) eap: EAP session adding &reply:State = 0xd24e2fefd247361e (13) [eap] = handled (13) } # authenticate = handled (13) Using Post-Auth-Type Challenge (13) # Executing group from file /etc/raddb/sites-enabled/default (13) Challenge { ... } # empty sub-section is ignored (13) Sent Access-Challenge Id 86 from 192.168.99.13:1812 to 192.168.99.2:56765 length 0 (13) EAP-Message = 0x010900061920 (13) Message-Authenticator = 0x00000000000000000000000000000000 (13) State = 0xd24e2fefd247361eca7551413078c7bf (13) Finished request Waking up in 4.9 seconds. (14) Received Access-Request Id 87 from 192.168.99.2:56765 to 192.168.99.13:1812 length 349 (14) User-Name = "SEDLMEIER\\iah" (14) Service-Type = Framed-User (14) Called-Station-Id = "D8-84-66-1C-A0-C2" (14) Calling-Station-Id = "74-2B-62-85-F5-5D" (14) NAS-Identifier = "sed-nw-sw-01.sedlmeier.local" (14) NAS-Port = 5 (14) NAS-Port-Id = "fe.1.5" (14) Framed-MTU = 1500 (14) NAS-Port-Type = Ethernet (14) State = 0xd24e2fefd247361eca7551413078c7bf (14) EAP-Message = 0x020900aa1980000000a0160303009b010000970303597ef3eb3f5f0cdf9d002c82661bdd703d5d6924c837b49643e04172f2686dd900002ec02cc02bc030c02f009f009ec024c023c028c027c00ac009c014c013009d009c003d003c0035002f000a0005000401000040000500050100000000000a0008 (14) NAS-IP-Address = 0.0.0.0 (14) Message-Authenticator = 0x3948db8556c9c85fddb72a5b0c0de12d (14) session-state: No cached attributes (14) # Executing section authorize from file /etc/raddb/sites-enabled/default (14) authorize { (14) policy filter_username { (14) if (&User-Name) { (14) if (&User-Name) -> TRUE (14) if (&User-Name) { (14) if (&User-Name =~ / /) { (14) if (&User-Name =~ / /) -> FALSE (14) if (&User-Name =~ /@[^@]*@/ ) { (14) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (14) if (&User-Name =~ /\.\./ ) { (14) if (&User-Name =~ /\.\./ ) -> FALSE (14) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (14) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (14) if (&User-Name =~ /\.$/) { (14) if (&User-Name =~ /\.$/) -> FALSE (14) if (&User-Name =~ /(a)\./) { (14) if (&User-Name =~ /(a)\./) -> FALSE (14) } # if (&User-Name) = notfound (14) } # policy filter_username = notfound (14) [preprocess] = ok (14) [chap] = noop (14) [mschap] = noop (14) [digest] = noop (14) suffix: Checking for suffix after "@" (14) suffix: No '@' in User-Name = "SEDLMEIER\iah", looking up realm NULL (14) suffix: No such realm "NULL" (14) [suffix] = noop (14) ntdomain: Checking for prefix before "\" (14) ntdomain: Looking up realm "SEDLMEIER" for User-Name = "SEDLMEIER\iah" (14) ntdomain: Found realm "SEDLMEIER" (14) ntdomain: Adding Stripped-User-Name = "iah" (14) ntdomain: Adding Realm = "SEDLMEIER" (14) ntdomain: Authentication realm is LOCAL (14) [ntdomain] = ok (14) eap: Peer sent EAP Response (code 2) ID 9 length 170 (14) eap: Continuing tunnel setup (14) [eap] = ok (14) } # authorize = ok (14) Found Auth-Type = eap (14) # Executing group from file /etc/raddb/sites-enabled/default (14) authenticate { (14) eap: Expiring EAP session with state 0xe102a8b5e504b184 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !! EAP session with state 0xe102a8b5e504b184 did not finish! !! !! Please read http://wiki.freeradius.org/guide/Certificate_Compatibility !! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! (14) eap: Expiring EAP session with state 0x5c12086c581511e3 (14) eap: Finished EAP session with state 0xd24e2fefd247361e (14) eap: Previous EAP request found for state 0xd24e2fefd247361e, released from the list (14) eap: Peer sent packet with method EAP PEAP (25) (14) eap: Calling submodule eap_peap to process data (14) eap_peap: Continuing EAP-TLS (14) eap_peap: Peer indicated complete TLS record size will be 160 bytes (14) eap_peap: Got complete TLS record (160 bytes) (14) eap_peap: [eaptls verify] = length included (14) eap_peap: (other): before/accept initialization (14) eap_peap: TLS_accept: before/accept initialization (14) eap_peap: <<< recv TLS 1.2 [length 009b] (14) eap_peap: TLS_accept: SSLv3 read client hello A (14) eap_peap: >>> send TLS 1.2 [length 0039] (14) eap_peap: TLS_accept: SSLv3 write server hello A (14) eap_peap: >>> send TLS 1.2 [length 0910] (14) eap_peap: TLS_accept: SSLv3 write certificate A (14) eap_peap: >>> send TLS 1.2 [length 014d] (14) eap_peap: TLS_accept: SSLv3 write key exchange A (14) eap_peap: >>> send TLS 1.2 [length 0004] (14) eap_peap: TLS_accept: SSLv3 write server done A (14) eap_peap: TLS_accept: SSLv3 flush data (14) eap_peap: TLS_accept: Need to read more data: SSLv3 read client certificate A (14) eap_peap: TLS_accept: Need to read more data: SSLv3 read client certificate A (14) eap_peap: In SSL Handshake Phase (14) eap_peap: In SSL Accept mode (14) eap_peap: [eaptls process] = handled (14) eap: Sending EAP Request (code 1) ID 10 length 1004 (14) eap: EAP session adding &reply:State = 0xd24e2fefd344361e (14) [eap] = handled (14) } # authenticate = handled (14) Using Post-Auth-Type Challenge (14) # Executing group from file /etc/raddb/sites-enabled/default (14) Challenge { ... } # empty sub-section is ignored (14) Sent Access-Challenge Id 87 from 192.168.99.13:1812 to 192.168.99.2:56765 length 0 (14) EAP-Message = 0x010a03ec19c000000aae1603030039020000350303597ef3e99badfb8693744cdcd7601bd3e974444747f08040cff0d223da1f0c8a00c03000000dff01000100000b00040300010216030309100b00090c0009090003f7308203f3308202dba003020102020101300d06092a864886f70d01010b050030 (14) Message-Authenticator = 0x00000000000000000000000000000000 (14) State = 0xd24e2fefd344361eca7551413078c7bf (14) Finished request Waking up in 4.9 seconds. (15) Received Access-Request Id 88 from 192.168.99.2:56765 to 192.168.99.13:1812 length 185 (15) User-Name = "SEDLMEIER\\iah" (15) Service-Type = Framed-User (15) Called-Station-Id = "D8-84-66-1C-A0-C2" (15) Calling-Station-Id = "74-2B-62-85-F5-5D" (15) NAS-Identifier = "sed-nw-sw-01.sedlmeier.local" (15) NAS-Port = 5 (15) NAS-Port-Id = "fe.1.5" (15) Framed-MTU = 1500 (15) NAS-Port-Type = Ethernet (15) State = 0xd24e2fefd344361eca7551413078c7bf (15) EAP-Message = 0x020a00061900 (15) NAS-IP-Address = 0.0.0.0 (15) Message-Authenticator = 0xf862a5636affc708d17664f7967df861 (15) session-state: No cached attributes (15) # Executing section authorize from file /etc/raddb/sites-enabled/default (15) authorize { (15) policy filter_username { (15) if (&User-Name) { (15) if (&User-Name) -> TRUE (15) if (&User-Name) { (15) if (&User-Name =~ / /) { (15) if (&User-Name =~ / /) -> FALSE (15) if (&User-Name =~ /@[^@]*@/ ) { (15) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (15) if (&User-Name =~ /\.\./ ) { (15) if (&User-Name =~ /\.\./ ) -> FALSE (15) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (15) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (15) if (&User-Name =~ /\.$/) { (15) if (&User-Name =~ /\.$/) -> FALSE (15) if (&User-Name =~ /(a)\./) { (15) if (&User-Name =~ /(a)\./) -> FALSE (15) } # if (&User-Name) = notfound (15) } # policy filter_username = notfound (15) [preprocess] = ok (15) [chap] = noop (15) [mschap] = noop (15) [digest] = noop (15) suffix: Checking for suffix after "@" (15) suffix: No '@' in User-Name = "SEDLMEIER\iah", looking up realm NULL (15) suffix: No such realm "NULL" (15) [suffix] = noop (15) ntdomain: Checking for prefix before "\" (15) ntdomain: Looking up realm "SEDLMEIER" for User-Name = "SEDLMEIER\iah" (15) ntdomain: Found realm "SEDLMEIER" (15) ntdomain: Adding Stripped-User-Name = "iah" (15) ntdomain: Adding Realm = "SEDLMEIER" (15) ntdomain: Authentication realm is LOCAL (15) [ntdomain] = ok (15) eap: Peer sent EAP Response (code 2) ID 10 length 6 (15) eap: Continuing tunnel setup (15) [eap] = ok (15) } # authorize = ok (15) Found Auth-Type = eap (15) # Executing group from file /etc/raddb/sites-enabled/default (15) authenticate { (15) eap: Expiring EAP session with state 0x5c12086c581511e3 (15) eap: Finished EAP session with state 0xd24e2fefd344361e (15) eap: Previous EAP request found for state 0xd24e2fefd344361e, released from the list (15) eap: Peer sent packet with method EAP PEAP (25) (15) eap: Calling submodule eap_peap to process data (15) eap_peap: Continuing EAP-TLS (15) eap_peap: Peer ACKed our handshake fragment (15) eap_peap: [eaptls verify] = request (15) eap_peap: [eaptls process] = handled (15) eap: Sending EAP Request (code 1) ID 11 length 1000 (15) eap: EAP session adding &reply:State = 0xd24e2fefd045361e (15) [eap] = handled (15) } # authenticate = handled (15) Using Post-Auth-Type Challenge (15) # Executing group from file /etc/raddb/sites-enabled/default (15) Challenge { ... } # empty sub-section is ignored (15) Sent Access-Challenge Id 88 from 192.168.99.13:1812 to 192.168.99.2:56765 length 0 (15) EAP-Message = 0x010b03e8194022518c1dec2cbb2f69d25320c61e68c7f0b7c8b0ae456881bf11f25fb4734527d9e23825158b087c6fd71853cbc94218fa747fbb854f8a6b48583f69cffde05d5cd8c71c2eab8f1cbfd016db9ee4fbfda2bba6b46ea1587e1118771bad825657998f00050c30820508308203f0a0030201 (15) Message-Authenticator = 0x00000000000000000000000000000000 (15) State = 0xd24e2fefd045361eca7551413078c7bf (15) Finished request Waking up in 4.9 seconds. (16) Received Access-Request Id 89 from 192.168.99.2:56765 to 192.168.99.13:1812 length 185 (16) User-Name = "SEDLMEIER\\iah" (16) Service-Type = Framed-User (16) Called-Station-Id = "D8-84-66-1C-A0-C2" (16) Calling-Station-Id = "74-2B-62-85-F5-5D" (16) NAS-Identifier = "sed-nw-sw-01.sedlmeier.local" (16) NAS-Port = 5 (16) NAS-Port-Id = "fe.1.5" (16) Framed-MTU = 1500 (16) NAS-Port-Type = Ethernet (16) State = 0xd24e2fefd045361eca7551413078c7bf (16) EAP-Message = 0x020b00061900 (16) NAS-IP-Address = 0.0.0.0 (16) Message-Authenticator = 0xb50b422e3023158679ac2bb2da0882ef (16) session-state: No cached attributes (16) # Executing section authorize from file /etc/raddb/sites-enabled/default (16) authorize { (16) policy filter_username { (16) if (&User-Name) { (16) if (&User-Name) -> TRUE (16) if (&User-Name) { (16) if (&User-Name =~ / /) { (16) if (&User-Name =~ / /) -> FALSE (16) if (&User-Name =~ /@[^@]*@/ ) { (16) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (16) if (&User-Name =~ /\.\./ ) { (16) if (&User-Name =~ /\.\./ ) -> FALSE (16) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (16) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (16) if (&User-Name =~ /\.$/) { (16) if (&User-Name =~ /\.$/) -> FALSE (16) if (&User-Name =~ /(a)\./) { (16) if (&User-Name =~ /(a)\./) -> FALSE (16) } # if (&User-Name) = notfound (16) } # policy filter_username = notfound (16) [preprocess] = ok (16) [chap] = noop (16) [mschap] = noop (16) [digest] = noop (16) suffix: Checking for suffix after "@" (16) suffix: No '@' in User-Name = "SEDLMEIER\iah", looking up realm NULL (16) suffix: No such realm "NULL" (16) [suffix] = noop (16) ntdomain: Checking for prefix before "\" (16) ntdomain: Looking up realm "SEDLMEIER" for User-Name = "SEDLMEIER\iah" (16) ntdomain: Found realm "SEDLMEIER" (16) ntdomain: Adding Stripped-User-Name = "iah" (16) ntdomain: Adding Realm = "SEDLMEIER" (16) ntdomain: Authentication realm is LOCAL (16) [ntdomain] = ok (16) eap: Peer sent EAP Response (code 2) ID 11 length 6 (16) eap: Continuing tunnel setup (16) [eap] = ok (16) } # authorize = ok (16) Found Auth-Type = eap (16) # Executing group from file /etc/raddb/sites-enabled/default (16) authenticate { (16) eap: Expiring EAP session with state 0x5c12086c581511e3 (16) eap: Finished EAP session with state 0xd24e2fefd045361e (16) eap: Previous EAP request found for state 0xd24e2fefd045361e, released from the list (16) eap: Peer sent packet with method EAP PEAP (25) (16) eap: Calling submodule eap_peap to process data (16) eap_peap: Continuing EAP-TLS (16) eap_peap: Peer ACKed our handshake fragment (16) eap_peap: [eaptls verify] = request (16) eap_peap: [eaptls process] = handled (16) eap: Sending EAP Request (code 1) ID 12 length 752 (16) eap: EAP session adding &reply:State = 0xd24e2fefd142361e (16) [eap] = handled (16) } # authenticate = handled (16) Using Post-Auth-Type Challenge (16) # Executing group from file /etc/raddb/sites-enabled/default (16) Challenge { ... } # empty sub-section is ignored (16) Sent Access-Challenge Id 89 from 192.168.99.13:1812 to 192.168.99.2:56765 length 0 (16) EAP-Message = 0x010c02f01900260603550403131f5365646c6d6569657220436572746966696361746520417574686f72697479820900b2c4cbf303d91155300f0603551d130101ff040530030101ff30360603551d1f042f302d302ba029a0278625687474703a2f2f7777772e6578616d706c652e6f72672f6578616d (16) Message-Authenticator = 0x00000000000000000000000000000000 (16) State = 0xd24e2fefd142361eca7551413078c7bf (16) Finished request Waking up in 4.9 seconds. (17) Received Access-Request Id 90 from 192.168.99.2:56765 to 192.168.99.13:1812 length 315 (17) User-Name = "SEDLMEIER\\iah" (17) Service-Type = Framed-User (17) Called-Station-Id = "D8-84-66-1C-A0-C2" (17) Calling-Station-Id = "74-2B-62-85-F5-5D" (17) NAS-Identifier = "sed-nw-sw-01.sedlmeier.local" (17) NAS-Port = 5 (17) NAS-Port-Id = "fe.1.5" (17) Framed-MTU = 1500 (17) NAS-Port-Type = Ethernet (17) State = 0xd24e2fefd142361eca7551413078c7bf (17) EAP-Message = 0x020c008819800000007e1603030046100000424104448b22ede4a0e77a739219e3c41aebb4661afdbe06012588afd6bdd0178ea8be11cb65e55b389fce98c8a05ab3468908468bd9531fb1316271bba8f904a6eeb5140303000101160303002800000000000000002b081693acf8713f55f691ee064a87 (17) NAS-IP-Address = 0.0.0.0 (17) Message-Authenticator = 0x9929cea011801053b9263e9451e5cb5a (17) session-state: No cached attributes (17) # Executing section authorize from file /etc/raddb/sites-enabled/default (17) authorize { (17) policy filter_username { (17) if (&User-Name) { (17) if (&User-Name) -> TRUE (17) if (&User-Name) { (17) if (&User-Name =~ / /) { (17) if (&User-Name =~ / /) -> FALSE (17) if (&User-Name =~ /@[^@]*@/ ) { (17) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (17) if (&User-Name =~ /\.\./ ) { (17) if (&User-Name =~ /\.\./ ) -> FALSE (17) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (17) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (17) if (&User-Name =~ /\.$/) { (17) if (&User-Name =~ /\.$/) -> FALSE (17) if (&User-Name =~ /(a)\./) { (17) if (&User-Name =~ /(a)\./) -> FALSE (17) } # if (&User-Name) = notfound (17) } # policy filter_username = notfound (17) [preprocess] = ok (17) [chap] = noop (17) [mschap] = noop (17) [digest] = noop (17) suffix: Checking for suffix after "@" (17) suffix: No '@' in User-Name = "SEDLMEIER\iah", looking up realm NULL (17) suffix: No such realm "NULL" (17) [suffix] = noop (17) ntdomain: Checking for prefix before "\" (17) ntdomain: Looking up realm "SEDLMEIER" for User-Name = "SEDLMEIER\iah" (17) ntdomain: Found realm "SEDLMEIER" (17) ntdomain: Adding Stripped-User-Name = "iah" (17) ntdomain: Adding Realm = "SEDLMEIER" (17) ntdomain: Authentication realm is LOCAL (17) [ntdomain] = ok (17) eap: Peer sent EAP Response (code 2) ID 12 length 136 (17) eap: Continuing tunnel setup (17) [eap] = ok (17) } # authorize = ok (17) Found Auth-Type = eap (17) # Executing group from file /etc/raddb/sites-enabled/default (17) authenticate { (17) eap: Expiring EAP session with state 0x5c12086c581511e3 (17) eap: Finished EAP session with state 0xd24e2fefd142361e (17) eap: Previous EAP request found for state 0xd24e2fefd142361e, released from the list (17) eap: Peer sent packet with method EAP PEAP (25) (17) eap: Calling submodule eap_peap to process data (17) eap_peap: Continuing EAP-TLS (17) eap_peap: Peer indicated complete TLS record size will be 126 bytes (17) eap_peap: Got complete TLS record (126 bytes) (17) eap_peap: [eaptls verify] = length included (17) eap_peap: <<< recv TLS 1.2 [length 0046] (17) eap_peap: TLS_accept: SSLv3 read client key exchange A (17) eap_peap: <<< recv TLS 1.2 [length 0001] (17) eap_peap: <<< recv TLS 1.2 [length 0010] (17) eap_peap: TLS_accept: SSLv3 read finished A (17) eap_peap: >>> send TLS 1.2 [length 0001] (17) eap_peap: TLS_accept: SSLv3 write change cipher spec A (17) eap_peap: >>> send TLS 1.2 [length 0010] (17) eap_peap: TLS_accept: SSLv3 write finished A (17) eap_peap: TLS_accept: SSLv3 flush data (17) eap_peap: (other): SSL negotiation finished successfully (17) eap_peap: SSL Connection Established (17) eap_peap: [eaptls process] = handled (17) eap: Sending EAP Request (code 1) ID 13 length 57 (17) eap: EAP session adding &reply:State = 0xd24e2fefd643361e (17) [eap] = handled (17) } # authenticate = handled (17) Using Post-Auth-Type Challenge (17) # Executing group from file /etc/raddb/sites-enabled/default (17) Challenge { ... } # empty sub-section is ignored (17) Sent Access-Challenge Id 90 from 192.168.99.13:1812 to 192.168.99.2:56765 length 0 (17) EAP-Message = 0x010d00391900140303000101160303002843321548245ec01dba73ed278faccef9f8d84f6a91ba22e29ed32d8fa52b655a1961fed4437fbe96 (17) Message-Authenticator = 0x00000000000000000000000000000000 (17) State = 0xd24e2fefd643361eca7551413078c7bf (17) Finished request Waking up in 4.8 seconds. (18) Received Access-Request Id 91 from 192.168.99.2:56766 to 192.168.99.13:1812 length 185 (18) User-Name = "SEDLMEIER\\iah" (18) Service-Type = Framed-User (18) Called-Station-Id = "D8-84-66-1C-A0-C2" (18) Calling-Station-Id = "74-2B-62-85-F5-5D" (18) NAS-Identifier = "sed-nw-sw-01.sedlmeier.local" (18) NAS-Port = 5 (18) NAS-Port-Id = "fe.1.5" (18) Framed-MTU = 1500 (18) NAS-Port-Type = Ethernet (18) State = 0xd24e2fefd643361eca7551413078c7bf (18) EAP-Message = 0x020d00061900 (18) NAS-IP-Address = 0.0.0.0 (18) Message-Authenticator = 0x35124549b88f9a323dd5076569fd6f8f (18) session-state: No cached attributes (18) # Executing section authorize from file /etc/raddb/sites-enabled/default (18) authorize { (18) policy filter_username { (18) if (&User-Name) { (18) if (&User-Name) -> TRUE (18) if (&User-Name) { (18) if (&User-Name =~ / /) { (18) if (&User-Name =~ / /) -> FALSE (18) if (&User-Name =~ /@[^@]*@/ ) { (18) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (18) if (&User-Name =~ /\.\./ ) { (18) if (&User-Name =~ /\.\./ ) -> FALSE (18) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (18) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (18) if (&User-Name =~ /\.$/) { (18) if (&User-Name =~ /\.$/) -> FALSE (18) if (&User-Name =~ /(a)\./) { (18) if (&User-Name =~ /(a)\./) -> FALSE (18) } # if (&User-Name) = notfound (18) } # policy filter_username = notfound (18) [preprocess] = ok (18) [chap] = noop (18) [mschap] = noop (18) [digest] = noop (18) suffix: Checking for suffix after "@" (18) suffix: No '@' in User-Name = "SEDLMEIER\iah", looking up realm NULL (18) suffix: No such realm "NULL" (18) [suffix] = noop (18) ntdomain: Checking for prefix before "\" (18) ntdomain: Looking up realm "SEDLMEIER" for User-Name = "SEDLMEIER\iah" (18) ntdomain: Found realm "SEDLMEIER" (18) ntdomain: Adding Stripped-User-Name = "iah" (18) ntdomain: Adding Realm = "SEDLMEIER" (18) ntdomain: Authentication realm is LOCAL (18) [ntdomain] = ok (18) eap: Peer sent EAP Response (code 2) ID 13 length 6 (18) eap: Continuing tunnel setup (18) [eap] = ok (18) } # authorize = ok (18) Found Auth-Type = eap (18) # Executing group from file /etc/raddb/sites-enabled/default (18) authenticate { (18) eap: Expiring EAP session with state 0x5c12086c581511e3 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !! EAP session with state 0x5c12086c581511e3 did not finish! !! !! Please read http://wiki.freeradius.org/guide/Certificate_Compatibility !! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! (18) eap: Expiring EAP session with state 0xd24e2fefd643361e (18) eap: Finished EAP session with state 0xd24e2fefd643361e (18) eap: Previous EAP request found for state 0xd24e2fefd643361e, released from the list (18) eap: Peer sent packet with method EAP PEAP (25) (18) eap: Calling submodule eap_peap to process data (18) eap_peap: Continuing EAP-TLS (18) eap_peap: Peer ACKed our handshake fragment. handshake is finished (18) eap_peap: [eaptls verify] = success (18) eap_peap: [eaptls process] = success (18) eap_peap: Session established. Decoding tunneled attributes (18) eap_peap: PEAP state TUNNEL ESTABLISHED (18) eap: Sending EAP Request (code 1) ID 14 length 40 (18) eap: EAP session adding &reply:State = 0xd24e2fefd740361e (18) [eap] = handled (18) } # authenticate = handled (18) Using Post-Auth-Type Challenge (18) # Executing group from file /etc/raddb/sites-enabled/default (18) Challenge { ... } # empty sub-section is ignored (18) Sent Access-Challenge Id 91 from 192.168.99.13:1812 to 192.168.99.2:56766 length 0 (18) EAP-Message = 0x010e00281900170303001d43321548245ec01e88708f1dd4574539af080bc7be566d374a7cdc5bcf (18) Message-Authenticator = 0x00000000000000000000000000000000 (18) State = 0xd24e2fefd740361eca7551413078c7bf (18) Finished request Waking up in 1.1 seconds. (19) Received Access-Request Id 92 from 192.168.99.2:56766 to 192.168.99.13:1812 length 228 (19) User-Name = "SEDLMEIER\\iah" (19) Service-Type = Framed-User (19) Called-Station-Id = "D8-84-66-1C-A0-C2" (19) Calling-Station-Id = "74-2B-62-85-F5-5D" (19) NAS-Identifier = "sed-nw-sw-01.sedlmeier.local" (19) NAS-Port = 5 (19) NAS-Port-Id = "fe.1.5" (19) Framed-MTU = 1500 (19) NAS-Port-Type = Ethernet (19) State = 0xd24e2fefd740361eca7551413078c7bf (19) EAP-Message = 0x020e00311900170303002600000000000000014c60e795d3fff33be1fe23d361a3ffdd260b0c9848c8ab9a79295107f35c (19) NAS-IP-Address = 0.0.0.0 (19) Message-Authenticator = 0xf15bf8bf58a9bddd9cb9d5bcd7258a75 (19) session-state: No cached attributes (19) # Executing section authorize from file /etc/raddb/sites-enabled/default (19) authorize { (19) policy filter_username { (19) if (&User-Name) { (19) if (&User-Name) -> TRUE (19) if (&User-Name) { (19) if (&User-Name =~ / /) { (19) if (&User-Name =~ / /) -> FALSE (19) if (&User-Name =~ /@[^@]*@/ ) { (19) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (19) if (&User-Name =~ /\.\./ ) { (19) if (&User-Name =~ /\.\./ ) -> FALSE (19) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (19) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (19) if (&User-Name =~ /\.$/) { (19) if (&User-Name =~ /\.$/) -> FALSE (19) if (&User-Name =~ /(a)\./) { (19) if (&User-Name =~ /(a)\./) -> FALSE (19) } # if (&User-Name) = notfound (19) } # policy filter_username = notfound (19) [preprocess] = ok (19) [chap] = noop (19) [mschap] = noop (19) [digest] = noop (19) suffix: Checking for suffix after "@" (19) suffix: No '@' in User-Name = "SEDLMEIER\iah", looking up realm NULL (19) suffix: No such realm "NULL" (19) [suffix] = noop (19) ntdomain: Checking for prefix before "\" (19) ntdomain: Looking up realm "SEDLMEIER" for User-Name = "SEDLMEIER\iah" (19) ntdomain: Found realm "SEDLMEIER" (19) ntdomain: Adding Stripped-User-Name = "iah" (19) ntdomain: Adding Realm = "SEDLMEIER" (19) ntdomain: Authentication realm is LOCAL (19) [ntdomain] = ok (19) eap: Peer sent EAP Response (code 2) ID 14 length 49 (19) eap: Continuing tunnel setup (19) [eap] = ok (19) } # authorize = ok (19) Found Auth-Type = eap (19) # Executing group from file /etc/raddb/sites-enabled/default (19) authenticate { (19) eap: Expiring EAP session with state 0xd24e2fefd740361e (19) eap: Finished EAP session with state 0xd24e2fefd740361e (19) eap: Previous EAP request found for state 0xd24e2fefd740361e, released from the list (19) eap: Peer sent packet with method EAP PEAP (25) (19) eap: Calling submodule eap_peap to process data (19) eap_peap: Continuing EAP-TLS (19) eap_peap: [eaptls verify] = ok (19) eap_peap: Done initial handshake (19) eap_peap: [eaptls process] = ok (19) eap_peap: Session established. Decoding tunneled attributes (19) eap_peap: PEAP state WAITING FOR INNER IDENTITY (19) eap_peap: Identity - SEDLMEIER\iah (19) eap_peap: Got inner identity 'SEDLMEIER\iah' (19) eap_peap: Setting default EAP type for tunneled EAP session (19) eap_peap: Got tunneled request (19) eap_peap: EAP-Message = 0x020e0012015345444c4d454945525c696168 (19) eap_peap: Setting User-Name to SEDLMEIER\iah (19) eap_peap: Sending tunneled request to inner-tunnel (19) eap_peap: EAP-Message = 0x020e0012015345444c4d454945525c696168 (19) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (19) eap_peap: User-Name = "SEDLMEIER\\iah" (19) Virtual server inner-tunnel received request (19) EAP-Message = 0x020e0012015345444c4d454945525c696168 (19) FreeRADIUS-Proxied-To = 127.0.0.1 (19) User-Name = "SEDLMEIER\\iah" (19) WARNING: Outer and inner identities are the same. User privacy is compromised. (19) server inner-tunnel { (19) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel (19) authorize { (19) policy filter_username { (19) if (&User-Name) { (19) if (&User-Name) -> TRUE (19) if (&User-Name) { (19) if (&User-Name =~ / /) { (19) if (&User-Name =~ / /) -> FALSE (19) if (&User-Name =~ /@[^@]*@/ ) { (19) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (19) if (&User-Name =~ /\.\./ ) { (19) if (&User-Name =~ /\.\./ ) -> FALSE (19) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (19) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (19) if (&User-Name =~ /\.$/) { (19) if (&User-Name =~ /\.$/) -> FALSE (19) if (&User-Name =~ /(a)\./) { (19) if (&User-Name =~ /(a)\./) -> FALSE (19) } # if (&User-Name) = notfound (19) } # policy filter_username = notfound (19) [chap] = noop (19) [mschap] = noop (19) suffix: Checking for suffix after "@" (19) suffix: No '@' in User-Name = "SEDLMEIER\iah", looking up realm NULL (19) suffix: No such realm "NULL" (19) [suffix] = noop (19) update control { (19) &Proxy-To-Realm := LOCAL (19) } # update control = noop (19) eap: Peer sent EAP Response (code 2) ID 14 length 18 (19) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (19) [eap] = ok (19) } # authorize = ok (19) Found Auth-Type = eap (19) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (19) authenticate { (19) eap: Peer sent packet with method EAP Identity (1) (19) eap: Calling submodule eap_mschapv2 to process data (19) eap_mschapv2: Issuing Challenge (19) eap: Sending EAP Request (code 1) ID 15 length 43 (19) eap: EAP session adding &reply:State = 0xd63550fbd63a4a59 (19) [eap] = handled (19) } # authenticate = handled (19) } # server inner-tunnel (19) Virtual server sending reply (19) EAP-Message = 0x010f002b1a010f002610cdb5ec45cd7c8807ca51f4db0a9a0f8e667265657261646975732d332e302e3135 (19) Message-Authenticator = 0x00000000000000000000000000000000 (19) State = 0xd63550fbd63a4a59a7b76b3185c969aa (19) eap_peap: Got tunneled reply code 11 (19) eap_peap: EAP-Message = 0x010f002b1a010f002610cdb5ec45cd7c8807ca51f4db0a9a0f8e667265657261646975732d332e302e3135 (19) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (19) eap_peap: State = 0xd63550fbd63a4a59a7b76b3185c969aa (19) eap_peap: Got tunneled reply RADIUS code 11 (19) eap_peap: EAP-Message = 0x010f002b1a010f002610cdb5ec45cd7c8807ca51f4db0a9a0f8e667265657261646975732d332e302e3135 (19) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (19) eap_peap: State = 0xd63550fbd63a4a59a7b76b3185c969aa (19) eap_peap: Got tunneled Access-Challenge (19) eap: Sending EAP Request (code 1) ID 15 length 74 (19) eap: EAP session adding &reply:State = 0xd24e2fefd441361e (19) [eap] = handled (19) } # authenticate = handled (19) Using Post-Auth-Type Challenge (19) # Executing group from file /etc/raddb/sites-enabled/default (19) Challenge { ... } # empty sub-section is ignored (19) Sent Access-Challenge Id 92 from 192.168.99.13:1812 to 192.168.99.2:56766 length 0 (19) EAP-Message = 0x010f004a1900170303003f43321548245ec01fd8d4b27cca3a84abb84109983ba36bcbb5f93f5107a6d42a8784d3e3a77558274dc11880a5f3da779aa89051dcb25dd6ab1c86923b3cbb (19) Message-Authenticator = 0x00000000000000000000000000000000 (19) State = 0xd24e2fefd441361eca7551413078c7bf (19) Finished request Waking up in 0.8 seconds. (20) Received Access-Request Id 93 from 192.168.99.2:56766 to 192.168.99.13:1812 length 282 (20) User-Name = "SEDLMEIER\\iah" (20) Service-Type = Framed-User (20) Called-Station-Id = "D8-84-66-1C-A0-C2" (20) Calling-Station-Id = "74-2B-62-85-F5-5D" (20) NAS-Identifier = "sed-nw-sw-01.sedlmeier.local" (20) NAS-Port = 5 (20) NAS-Port-Id = "fe.1.5" (20) Framed-MTU = 1500 (20) NAS-Port-Type = Ethernet (20) State = 0xd24e2fefd441361eca7551413078c7bf (20) EAP-Message = 0x020f00671900170303005c000000000000000243241aa425d6f7c8d71509c3b60a4c6b8db4cad3d64eef888d40802d40c2c86b4500c9bb1901556e079452b3643718c88cdb7fe0a50aa320e9d9c7f849290f380b06d9730e79d4e4c2be3e04b14c604a00ccbdd2 (20) NAS-IP-Address = 0.0.0.0 (20) Message-Authenticator = 0xa846eca9d309e94652e1c58fbaa05dce (20) session-state: No cached attributes (20) # Executing section authorize from file /etc/raddb/sites-enabled/default (20) authorize { (20) policy filter_username { (20) if (&User-Name) { (20) if (&User-Name) -> TRUE (20) if (&User-Name) { (20) if (&User-Name =~ / /) { (20) if (&User-Name =~ / /) -> FALSE (20) if (&User-Name =~ /@[^@]*@/ ) { (20) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (20) if (&User-Name =~ /\.\./ ) { (20) if (&User-Name =~ /\.\./ ) -> FALSE (20) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (20) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (20) if (&User-Name =~ /\.$/) { (20) if (&User-Name =~ /\.$/) -> FALSE (20) if (&User-Name =~ /(a)\./) { (20) if (&User-Name =~ /(a)\./) -> FALSE (20) } # if (&User-Name) = notfound (20) } # policy filter_username = notfound (20) [preprocess] = ok (20) [chap] = noop (20) [mschap] = noop (20) [digest] = noop (20) suffix: Checking for suffix after "@" (20) suffix: No '@' in User-Name = "SEDLMEIER\iah", looking up realm NULL (20) suffix: No such realm "NULL" (20) [suffix] = noop (20) ntdomain: Checking for prefix before "\" (20) ntdomain: Looking up realm "SEDLMEIER" for User-Name = "SEDLMEIER\iah" (20) ntdomain: Found realm "SEDLMEIER" (20) ntdomain: Adding Stripped-User-Name = "iah" (20) ntdomain: Adding Realm = "SEDLMEIER" (20) ntdomain: Authentication realm is LOCAL (20) [ntdomain] = ok (20) eap: Peer sent EAP Response (code 2) ID 15 length 103 (20) eap: Continuing tunnel setup (20) [eap] = ok (20) } # authorize = ok (20) Found Auth-Type = eap (20) # Executing group from file /etc/raddb/sites-enabled/default (20) authenticate { (20) eap: Expiring EAP session with state 0xd63550fbd63a4a59 (20) eap: Finished EAP session with state 0xd24e2fefd441361e (20) eap: Previous EAP request found for state 0xd24e2fefd441361e, released from the list (20) eap: Peer sent packet with method EAP PEAP (25) (20) eap: Calling submodule eap_peap to process data (20) eap_peap: Continuing EAP-TLS (20) eap_peap: [eaptls verify] = ok (20) eap_peap: Done initial handshake (20) eap_peap: [eaptls process] = ok (20) eap_peap: Session established. Decoding tunneled attributes (20) eap_peap: PEAP state phase2 (20) eap_peap: EAP method MSCHAPv2 (26) (20) eap_peap: Got tunneled request (20) eap_peap: EAP-Message = 0x020f00481a020f0043312af06a1435a1a34bfca5dc612d69a1d10000000000000000aee7c918d346a026e864b8344642b61250828f7f16106ae4005345444c4d454945525c696168 (20) eap_peap: Setting User-Name to SEDLMEIER\iah (20) eap_peap: Sending tunneled request to inner-tunnel (20) eap_peap: EAP-Message = 0x020f00481a020f0043312af06a1435a1a34bfca5dc612d69a1d10000000000000000aee7c918d346a026e864b8344642b61250828f7f16106ae4005345444c4d454945525c696168 (20) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (20) eap_peap: User-Name = "SEDLMEIER\\iah" (20) eap_peap: State = 0xd63550fbd63a4a59a7b76b3185c969aa (20) Virtual server inner-tunnel received request (20) EAP-Message = 0x020f00481a020f0043312af06a1435a1a34bfca5dc612d69a1d10000000000000000aee7c918d346a026e864b8344642b61250828f7f16106ae4005345444c4d454945525c696168 (20) FreeRADIUS-Proxied-To = 127.0.0.1 (20) User-Name = "SEDLMEIER\\iah" (20) State = 0xd63550fbd63a4a59a7b76b3185c969aa (20) WARNING: Outer and inner identities are the same. User privacy is compromised. (20) server inner-tunnel { (20) session-state: No cached attributes (20) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel (20) authorize { (20) policy filter_username { (20) if (&User-Name) { (20) if (&User-Name) -> TRUE (20) if (&User-Name) { (20) if (&User-Name =~ / /) { (20) if (&User-Name =~ / /) -> FALSE (20) if (&User-Name =~ /@[^@]*@/ ) { (20) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (20) if (&User-Name =~ /\.\./ ) { (20) if (&User-Name =~ /\.\./ ) -> FALSE (20) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (20) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (20) if (&User-Name =~ /\.$/) { (20) if (&User-Name =~ /\.$/) -> FALSE (20) if (&User-Name =~ /(a)\./) { (20) if (&User-Name =~ /(a)\./) -> FALSE (20) } # if (&User-Name) = notfound (20) } # policy filter_username = notfound (20) [chap] = noop (20) [mschap] = noop (20) suffix: Checking for suffix after "@" (20) suffix: No '@' in User-Name = "SEDLMEIER\iah", looking up realm NULL (20) suffix: No such realm "NULL" (20) [suffix] = noop (20) update control { (20) &Proxy-To-Realm := LOCAL (20) } # update control = noop (20) eap: Peer sent EAP Response (code 2) ID 15 length 72 (20) eap: No EAP Start, assuming it's an on-going EAP conversation (20) [eap] = updated (20) files: Searching for user in group "CN=Radius lokal,OU=lokale,OU=Gruppen,OU=spezielle Konten,OU=Mitarbeiter,DC=sedlmeier,DC=local" rlm_ldap (ldap): Closing connection (5): Hit idle_timeout, was idle for 61 seconds rlm_ldap (ldap): Reserved connection (0) (20) files: EXPAND (samaccountname=%{%{Stripped-User-Name}:-%{User-Name}}) (20) files: --> (samaccountname=SEDLMEIER\5c5ciah) (20) files: Performing search in "OU=Mitarbeiter,DC=sedlmeier,DC=local" with filter "(samaccountname=SEDLMEIER\5c5ciah)", scope "sub" (20) files: Waiting for search result... (20) files: Search returned no results rlm_ldap (ldap): Released connection (0) Need 7 more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (8), 1 of 29 pending slots used rlm_ldap (ldap): Connecting to ldap://sed-vm-dc-01.sedlmeier.local:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (20) files: users: Matched entry DEFAULT at line 48 (20) [files] = ok rlm_ldap (ldap): Reserved connection (7) (20) ldap: EXPAND (samaccountname=%{%{Stripped-User-Name}:-%{User-Name}}) (20) ldap: --> (samaccountname=SEDLMEIER\5c5ciah) (20) ldap: Performing search in "OU=Mitarbeiter,DC=sedlmeier,DC=local" with filter "(samaccountname=SEDLMEIER\5c5ciah)", scope "sub" (20) ldap: Waiting for search result... (20) ldap: Search returned no results rlm_ldap (ldap): Released connection (7) (20) [ldap] = notfound (20) [expiration] = noop (20) [logintime] = noop (20) pap: WARNING: Auth-Type already set. Not setting to PAP (20) [pap] = noop (20) } # authorize = updated (20) Found Auth-Type = Reject (20) Auth-Type = Reject, rejecting user (20) Failed to authenticate the user (20) Using Post-Auth-Type Reject (20) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (20) Post-Auth-Type REJECT { (20) attr_filter.access_reject: EXPAND %{User-Name} (20) attr_filter.access_reject: --> SEDLMEIER\\iah (20) attr_filter.access_reject: Matched entry DEFAULT at line 11 (20) [attr_filter.access_reject] = updated (20) update outer.session-state { (20) No attributes updated (20) } # update outer.session-state = noop (20) } # Post-Auth-Type REJECT = updated (20) } # server inner-tunnel (20) Virtual server sending reply (20) eap_peap: Got tunneled reply code 3 (20) eap_peap: Got tunneled reply RADIUS code 3 (20) eap_peap: Tunneled authentication was rejected (20) eap_peap: FAILURE (20) eap: Sending EAP Request (code 1) ID 16 length 46 (20) eap: EAP session adding &reply:State = 0xd24e2fefd55e361e (20) [eap] = handled (20) } # authenticate = handled (20) Using Post-Auth-Type Challenge (20) # Executing group from file /etc/raddb/sites-enabled/default (20) Challenge { ... } # empty sub-section is ignored (20) Sent Access-Challenge Id 93 from 192.168.99.13:1812 to 192.168.99.2:56766 length 0 (20) EAP-Message = 0x0110002e1900170303002343321548245ec020494ccfac9bdaeb65e6d6b730b817ad0e5a713d9147d8907ee86758 (20) Message-Authenticator = 0x00000000000000000000000000000000 (20) State = 0xd24e2fefd55e361eca7551413078c7bf (20) Finished request Waking up in 0.8 seconds. (21) Received Access-Request Id 94 from 192.168.99.2:56766 to 192.168.99.13:1812 length 225 (21) User-Name = "SEDLMEIER\\iah" (21) Service-Type = Framed-User (21) Called-Station-Id = "D8-84-66-1C-A0-C2" (21) Calling-Station-Id = "74-2B-62-85-F5-5D" (21) NAS-Identifier = "sed-nw-sw-01.sedlmeier.local" (21) NAS-Port = 5 (21) NAS-Port-Id = "fe.1.5" (21) Framed-MTU = 1500 (21) NAS-Port-Type = Ethernet (21) State = 0xd24e2fefd55e361eca7551413078c7bf (21) EAP-Message = 0x0210002e190017030300230000000000000003fd9a2119383e53ff7d00f1f74abce68623121647bbdf04f935dd79 (21) NAS-IP-Address = 0.0.0.0 (21) Message-Authenticator = 0xa80f722db31b729f2e934bd07c37b528 (21) session-state: No cached attributes (21) # Executing section authorize from file /etc/raddb/sites-enabled/default (21) authorize { (21) policy filter_username { (21) if (&User-Name) { (21) if (&User-Name) -> TRUE (21) if (&User-Name) { (21) if (&User-Name =~ / /) { (21) if (&User-Name =~ / /) -> FALSE (21) if (&User-Name =~ /@[^@]*@/ ) { (21) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (21) if (&User-Name =~ /\.\./ ) { (21) if (&User-Name =~ /\.\./ ) -> FALSE (21) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (21) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (21) if (&User-Name =~ /\.$/) { (21) if (&User-Name =~ /\.$/) -> FALSE (21) if (&User-Name =~ /(a)\./) { (21) if (&User-Name =~ /(a)\./) -> FALSE (21) } # if (&User-Name) = notfound (21) } # policy filter_username = notfound (21) [preprocess] = ok (21) [chap] = noop (21) [mschap] = noop (21) [digest] = noop (21) suffix: Checking for suffix after "@" (21) suffix: No '@' in User-Name = "SEDLMEIER\iah", looking up realm NULL (21) suffix: No such realm "NULL" (21) [suffix] = noop (21) ntdomain: Checking for prefix before "\" (21) ntdomain: Looking up realm "SEDLMEIER" for User-Name = "SEDLMEIER\iah" (21) ntdomain: Found realm "SEDLMEIER" (21) ntdomain: Adding Stripped-User-Name = "iah" (21) ntdomain: Adding Realm = "SEDLMEIER" (21) ntdomain: Authentication realm is LOCAL (21) [ntdomain] = ok (21) eap: Peer sent EAP Response (code 2) ID 16 length 46 (21) eap: Continuing tunnel setup (21) [eap] = ok (21) } # authorize = ok (21) Found Auth-Type = eap (21) # Executing group from file /etc/raddb/sites-enabled/default (21) authenticate { (21) eap: Expiring EAP session with state 0xd63550fbd63a4a59 (21) eap: Finished EAP session with state 0xd24e2fefd55e361e (21) eap: Previous EAP request found for state 0xd24e2fefd55e361e, released from the list (21) eap: Peer sent packet with method EAP PEAP (25) (21) eap: Calling submodule eap_peap to process data (21) eap_peap: Continuing EAP-TLS (21) eap_peap: [eaptls verify] = ok (21) eap_peap: Done initial handshake (21) eap_peap: [eaptls process] = ok (21) eap_peap: Session established. Decoding tunneled attributes (21) eap_peap: PEAP state send tlv failure (21) eap_peap: Received EAP-TLV response (21) eap_peap: ERROR: The users session was previously rejected: returning reject (again.) (21) eap_peap: This means you need to read the PREVIOUS messages in the debug output (21) eap_peap: to find out the reason why the user was rejected (21) eap_peap: Look for "reject" or "fail". Those earlier messages will tell you (21) eap_peap: what went wrong, and how to fix the problem (21) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module failed (21) eap: Sending EAP Failure (code 4) ID 16 length 4 (21) eap: Failed in EAP select (21) [eap] = invalid (21) } # authenticate = invalid (21) Failed to authenticate the user (21) Using Post-Auth-Type Reject (21) # Executing group from file /etc/raddb/sites-enabled/default (21) Post-Auth-Type REJECT { (21) attr_filter.access_reject: EXPAND %{User-Name} (21) attr_filter.access_reject: --> SEDLMEIER\\iah (21) attr_filter.access_reject: Matched entry DEFAULT at line 11 (21) [attr_filter.access_reject] = updated (21) [eap] = noop (21) policy remove_reply_message_if_eap { (21) if (&reply:EAP-Message && &reply:Reply-Message) { (21) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (21) else { (21) [noop] = noop (21) } # else = noop (21) } # policy remove_reply_message_if_eap = noop (21) } # Post-Auth-Type REJECT = updated (21) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.5 seconds. (13) Cleaning up request packet ID 86 with timestamp +120 (14) Cleaning up request packet ID 87 with timestamp +120 (15) Cleaning up request packet ID 88 with timestamp +120 (16) Cleaning up request packet ID 89 with timestamp +120 (17) Cleaning up request packet ID 90 with timestamp +120 (21) Sending delayed response (21) Sent Access-Reject Id 94 from 192.168.99.13:1812 to 192.168.99.2:56766 length 44 (21) EAP-Message = 0x04100004 (21) Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.7 seconds. (22) Received Access-Request Id 95 from 192.168.99.2:56767 to 192.168.99.13:1812 length 175 (22) User-Name = "74-2B-62-85-F5-5D" (22) Service-Type = Framed-User (22) Called-Station-Id = "D8-84-66-1C-A0-C2" (22) Calling-Station-Id = "74-2B-62-85-F5-5D" (22) NAS-Identifier = "sed-nw-sw-01.sedlmeier.local" (22) NAS-Port = 5 (22) NAS-Port-Type = Ethernet (22) NAS-Port-Id = "fe.1.5" (22) NAS-IP-Address = 0.0.0.0 (22) User-Password = "NOPASSWORD" (22) Message-Authenticator = 0x021b111bb35ea99580a18323fb64c271 (22) # Executing section authorize from file /etc/raddb/sites-enabled/default (22) authorize { (22) policy filter_username { (22) if (&User-Name) { (22) if (&User-Name) -> TRUE (22) if (&User-Name) { (22) if (&User-Name =~ / /) { (22) if (&User-Name =~ / /) -> FALSE (22) if (&User-Name =~ /@[^@]*@/ ) { (22) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (22) if (&User-Name =~ /\.\./ ) { (22) if (&User-Name =~ /\.\./ ) -> FALSE (22) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (22) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (22) if (&User-Name =~ /\.$/) { (22) if (&User-Name =~ /\.$/) -> FALSE (22) if (&User-Name =~ /(a)\./) { (22) if (&User-Name =~ /(a)\./) -> FALSE (22) } # if (&User-Name) = notfound (22) } # policy filter_username = notfound (22) [preprocess] = ok (22) [chap] = noop (22) [mschap] = noop (22) [digest] = noop (22) suffix: Checking for suffix after "@" (22) suffix: No '@' in User-Name = "74-2B-62-85-F5-5D", looking up realm NULL (22) suffix: No such realm "NULL" (22) [suffix] = noop (22) ntdomain: Checking for prefix before "\" (22) ntdomain: No '\' in User-Name = "74-2B-62-85-F5-5D", looking up realm NULL (22) ntdomain: No such realm "NULL" (22) [ntdomain] = noop (22) eap: No EAP-Message, not doing EAP (22) [eap] = noop (22) files: Searching for user in group "CN=Radius lokal,OU=lokale,OU=Gruppen,OU=spezielle Konten,OU=Mitarbeiter,DC=sedlmeier,DC=local" rlm_ldap (ldap): Reserved connection (6) (22) files: EXPAND (samaccountname=%{%{Stripped-User-Name}:-%{User-Name}}) (22) files: --> (samaccountname=74-2B-62-85-F5-5D) (22) files: Performing search in "OU=Mitarbeiter,DC=sedlmeier,DC=local" with filter "(samaccountname=74-2B-62-85-F5-5D)", scope "sub" (22) files: Waiting for search result... (22) files: Search returned no results rlm_ldap (ldap): Released connection (6) Need 6 more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (9), 1 of 28 pending slots used rlm_ldap (ldap): Connecting to ldap://sed-vm-dc-01.sedlmeier.local:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (22) files: users: Matched entry DEFAULT at line 48 (22) [files] = ok rlm_ldap (ldap): Reserved connection (0) (22) ldap: EXPAND (samaccountname=%{%{Stripped-User-Name}:-%{User-Name}}) (22) ldap: --> (samaccountname=74-2B-62-85-F5-5D) (22) ldap: Performing search in "OU=Mitarbeiter,DC=sedlmeier,DC=local" with filter "(samaccountname=74-2B-62-85-F5-5D)", scope "sub" (22) ldap: Waiting for search result... (22) ldap: Search returned no results rlm_ldap (ldap): Released connection (0) (22) [ldap] = notfound (22) [expiration] = noop (22) [logintime] = noop (22) pap: WARNING: Auth-Type already set. Not setting to PAP (22) [pap] = noop (22) } # authorize = ok (22) Found Auth-Type = Reject (22) Auth-Type = Reject, rejecting user (22) Failed to authenticate the user (22) Using Post-Auth-Type Reject (22) # Executing group from file /etc/raddb/sites-enabled/default (22) Post-Auth-Type REJECT { (22) attr_filter.access_reject: EXPAND %{User-Name} (22) attr_filter.access_reject: --> 74-2B-62-85-F5-5D (22) attr_filter.access_reject: Matched entry DEFAULT at line 11 (22) [attr_filter.access_reject] = updated (22) [eap] = noop (22) policy remove_reply_message_if_eap { (22) if (&reply:EAP-Message && &reply:Reply-Message) { (22) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (22) else { (22) [noop] = noop (22) } # else = noop (22) } # policy remove_reply_message_if_eap = noop (22) } # Post-Auth-Type REJECT = updated (22) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (22) Sending delayed response (22) Sent Access-Reject Id 95 from 192.168.99.13:1812 to 192.168.99.2:56767 length 20 Waking up in 1.4 seconds. (18) Cleaning up request packet ID 91 with timestamp +124 Waking up in 0.2 seconds. (19) Cleaning up request packet ID 92 with timestamp +124 (20) Cleaning up request packet ID 93 with timestamp +124 (21) Cleaning up request packet ID 94 with timestamp +124 Waking up in 2.2 seconds. (22) Cleaning up request packet ID 95 with timestamp +127 Ready to process requests (23) Received Access-Request Id 96 from 192.168.99.2:56768 to 192.168.99.13:1812 length 175 (23) User-Name = "74-2B-62-85-F5-5D" (23) Service-Type = Framed-User (23) Called-Station-Id = "D8-84-66-1C-A0-C2" (23) Calling-Station-Id = "74-2B-62-85-F5-5D" (23) NAS-Identifier = "sed-nw-sw-01.sedlmeier.local" (23) NAS-Port = 5 (23) NAS-Port-Type = Ethernet (23) NAS-Port-Id = "fe.1.5" (23) NAS-IP-Address = 0.0.0.0 (23) User-Password = "NOPASSWORD" (23) Message-Authenticator = 0x61a938694f2b1d475b794be1a7b3ebe3 (23) # Executing section authorize from file /etc/raddb/sites-enabled/default (23) authorize { (23) policy filter_username { (23) if (&User-Name) { (23) if (&User-Name) -> TRUE (23) if (&User-Name) { (23) if (&User-Name =~ / /) { (23) if (&User-Name =~ / /) -> FALSE (23) if (&User-Name =~ /@[^@]*@/ ) { (23) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (23) if (&User-Name =~ /\.\./ ) { (23) if (&User-Name =~ /\.\./ ) -> FALSE (23) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (23) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (23) if (&User-Name =~ /\.$/) { (23) if (&User-Name =~ /\.$/) -> FALSE (23) if (&User-Name =~ /(a)\./) { (23) if (&User-Name =~ /(a)\./) -> FALSE (23) } # if (&User-Name) = notfound (23) } # policy filter_username = notfound (23) [preprocess] = ok (23) [chap] = noop (23) [mschap] = noop (23) [digest] = noop (23) suffix: Checking for suffix after "@" (23) suffix: No '@' in User-Name = "74-2B-62-85-F5-5D", looking up realm NULL (23) suffix: No such realm "NULL" (23) [suffix] = noop (23) ntdomain: Checking for prefix before "\" (23) ntdomain: No '\' in User-Name = "74-2B-62-85-F5-5D", looking up realm NULL (23) ntdomain: No such realm "NULL" (23) [ntdomain] = noop (23) eap: No EAP-Message, not doing EAP (23) [eap] = noop (23) files: Searching for user in group "CN=Radius lokal,OU=lokale,OU=Gruppen,OU=spezielle Konten,OU=Mitarbeiter,DC=sedlmeier,DC=local" rlm_ldap (ldap): Reserved connection (8) (23) files: EXPAND (samaccountname=%{%{Stripped-User-Name}:-%{User-Name}}) (23) files: --> (samaccountname=74-2B-62-85-F5-5D) (23) files: Performing search in "OU=Mitarbeiter,DC=sedlmeier,DC=local" with filter "(samaccountname=74-2B-62-85-F5-5D)", scope "sub" (23) files: Waiting for search result... (23) files: Search returned no results rlm_ldap (ldap): Released connection (8) Need 5 more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (10), 1 of 27 pending slots used rlm_ldap (ldap): Connecting to ldap://sed-vm-dc-01.sedlmeier.local:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (23) files: users: Matched entry DEFAULT at line 48 (23) [files] = ok rlm_ldap (ldap): Reserved connection (7) (23) ldap: EXPAND (samaccountname=%{%{Stripped-User-Name}:-%{User-Name}}) (23) ldap: --> (samaccountname=74-2B-62-85-F5-5D) (23) ldap: Performing search in "OU=Mitarbeiter,DC=sedlmeier,DC=local" with filter "(samaccountname=74-2B-62-85-F5-5D)", scope "sub" (23) ldap: Waiting for search result... (23) ldap: Search returned no results rlm_ldap (ldap): Released connection (7) (23) [ldap] = notfound (23) [expiration] = noop (23) [logintime] = noop (23) pap: WARNING: Auth-Type already set. Not setting to PAP (23) [pap] = noop (23) } # authorize = ok (23) Found Auth-Type = Reject (23) Auth-Type = Reject, rejecting user (23) Failed to authenticate the user (23) Using Post-Auth-Type Reject (23) # Executing group from file /etc/raddb/sites-enabled/default (23) Post-Auth-Type REJECT { (23) attr_filter.access_reject: EXPAND %{User-Name} (23) attr_filter.access_reject: --> 74-2B-62-85-F5-5D (23) attr_filter.access_reject: Matched entry DEFAULT at line 11 (23) [attr_filter.access_reject] = updated (23) [eap] = noop (23) policy remove_reply_message_if_eap { (23) if (&reply:EAP-Message && &reply:Reply-Message) { (23) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (23) else { (23) [noop] = noop (23) } # else = noop (23) } # policy remove_reply_message_if_eap = noop (23) } # Post-Auth-Type REJECT = updated (23) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (23) Sending delayed response (23) Sent Access-Reject Id 96 from 192.168.99.13:1812 to 192.168.99.2:56768 length 20 Waking up in 3.9 seconds. (23) Cleaning up request packet ID 96 with timestamp +159 Ready to process requests (24) Received Access-Request Id 97 from 192.168.99.2:56769 to 192.168.99.13:1812 length 175 (24) User-Name = "74-2B-62-85-F5-5D" (24) Service-Type = Framed-User (24) Called-Station-Id = "D8-84-66-1C-A0-C2" (24) Calling-Station-Id = "74-2B-62-85-F5-5D" (24) NAS-Identifier = "sed-nw-sw-01.sedlmeier.local" (24) NAS-Port = 5 (24) NAS-Port-Type = Ethernet (24) NAS-Port-Id = "fe.1.5" (24) NAS-IP-Address = 0.0.0.0 (24) User-Password = "NOPASSWORD" (24) Message-Authenticator = 0x9fd73ed0326f59255d14a3f48157518d (24) # Executing section authorize from file /etc/raddb/sites-enabled/default (24) authorize { (24) policy filter_username { (24) if (&User-Name) { (24) if (&User-Name) -> TRUE (24) if (&User-Name) { (24) if (&User-Name =~ / /) { (24) if (&User-Name =~ / /) -> FALSE (24) if (&User-Name =~ /@[^@]*@/ ) { (24) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (24) if (&User-Name =~ /\.\./ ) { (24) if (&User-Name =~ /\.\./ ) -> FALSE (24) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (24) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (24) if (&User-Name =~ /\.$/) { (24) if (&User-Name =~ /\.$/) -> FALSE (24) if (&User-Name =~ /(a)\./) { (24) if (&User-Name =~ /(a)\./) -> FALSE (24) } # if (&User-Name) = notfound (24) } # policy filter_username = notfound (24) [preprocess] = ok (24) [chap] = noop (24) [mschap] = noop (24) [digest] = noop (24) suffix: Checking for suffix after "@" (24) suffix: No '@' in User-Name = "74-2B-62-85-F5-5D", looking up realm NULL (24) suffix: No such realm "NULL" (24) [suffix] = noop (24) ntdomain: Checking for prefix before "\" (24) ntdomain: No '\' in User-Name = "74-2B-62-85-F5-5D", looking up realm NULL (24) ntdomain: No such realm "NULL" (24) [ntdomain] = noop (24) eap: No EAP-Message, not doing EAP (24) [eap] = noop (24) files: Searching for user in group "CN=Radius lokal,OU=lokale,OU=Gruppen,OU=spezielle Konten,OU=Mitarbeiter,DC=sedlmeier,DC=local" rlm_ldap (ldap): Closing connection (6): Hit idle_timeout, was idle for 63 seconds rlm_ldap (ldap): Closing connection (9): Hit idle_timeout, was idle for 63 seconds rlm_ldap (ldap): Closing connection (0): Hit idle_timeout, was idle for 63 seconds rlm_ldap (ldap): Reserved connection (8) (24) files: EXPAND (samaccountname=%{%{Stripped-User-Name}:-%{User-Name}}) (24) files: --> (samaccountname=74-2B-62-85-F5-5D) (24) files: Performing search in "OU=Mitarbeiter,DC=sedlmeier,DC=local" with filter "(samaccountname=74-2B-62-85-F5-5D)", scope "sub" (24) files: Waiting for search result... (24) files: Search returned no results rlm_ldap (ldap): Released connection (8) Need 7 more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (11), 1 of 29 pending slots used rlm_ldap (ldap): Connecting to ldap://sed-vm-dc-01.sedlmeier.local:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (24) files: users: Matched entry DEFAULT at line 48 (24) [files] = ok rlm_ldap (ldap): Reserved connection (10) (24) ldap: EXPAND (samaccountname=%{%{Stripped-User-Name}:-%{User-Name}}) (24) ldap: --> (samaccountname=74-2B-62-85-F5-5D) (24) ldap: Performing search in "OU=Mitarbeiter,DC=sedlmeier,DC=local" with filter "(samaccountname=74-2B-62-85-F5-5D)", scope "sub" (24) ldap: Waiting for search result... (24) ldap: Search returned no results rlm_ldap (ldap): Released connection (10) (24) [ldap] = notfound (24) [expiration] = noop (24) [logintime] = noop (24) pap: WARNING: Auth-Type already set. Not setting to PAP (24) [pap] = noop (24) } # authorize = ok (24) Found Auth-Type = Reject (24) Auth-Type = Reject, rejecting user (24) Failed to authenticate the user (24) Using Post-Auth-Type Reject (24) # Executing group from file /etc/raddb/sites-enabled/default (24) Post-Auth-Type REJECT { (24) attr_filter.access_reject: EXPAND %{User-Name} (24) attr_filter.access_reject: --> 74-2B-62-85-F5-5D (24) attr_filter.access_reject: Matched entry DEFAULT at line 11 (24) [attr_filter.access_reject] = updated (24) [eap] = noop (24) policy remove_reply_message_if_eap { (24) if (&reply:EAP-Message && &reply:Reply-Message) { (24) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (24) else { (24) [noop] = noop (24) } # else = noop (24) } # policy remove_reply_message_if_eap = noop (24) } # Post-Auth-Type REJECT = updated (24) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (24) Sending delayed response (24) Sent Access-Reject Id 97 from 192.168.99.13:1812 to 192.168.99.2:56769 length 20 Waking up in 3.9 seconds. (24) Cleaning up request packet ID 97 with timestamp +190 Ready to process requests ----- Do you have any ideas about what it could be. Thanks in advance.

2 2

using Freeradius in a cloud application
by The Doctor 30 Jul '17

30 Jul '17

I wish to the following: ---------- ---------------------------- ---------------------- | client| --> | cloud from anywhere | -->| Freeradius auth. | ---------- ---------------------------- ---------------------- What is needed? -- Member - Liberal International This is doctor@@nl2k.ab.ca Ici doctor@@nl2k.ab.ca Yahweh, Queen & country!Never Satan President Republic!Beware AntiChrist rising! https://www.empire.kred/ROOTNK?t=94a1f39b Look at Psalms 14 and 53 on Atheism Talk Sense to a fool and he calls you foolish - Euripides

2 1

Ways to simplify configs?
by Dan Mahoney, System Admin 29 Jul '17

29 Jul '17

All, Is there some way to condense the config into a few files? I understand that we want huntgroups and users to be their own things, but my /usr/local/etc/raddb is currently 45 dirs and 215 files. Try putting that in puppet, to push out to several servers. I'm willing to keep the full tree on my puppet server for editing, but setting that up for deployment is insane. Bind, for example, has a tool that will read in a config and output the relevant, well-formatted, includes-processed, bit. Any ideas? -Dan -- "Don't try to out-wierd me. I get stranger things than you free with my breakfast cereal." -Button seen at I-CON XVII (and subsequently purchased) --------Dan Mahoney-------- Techie, Sysadmin, WebGeek Gushi on efnet/undernet IRC ICQ: 13735144 AIM: LarpGM Site: http://www.gushi.org ---------------------------

9 12

PBKDF2 Support
by Arran Cudbard-Bell 28 Jul '17

28 Jul '17

A few people have asked for this. There’s now support for PBKDF2 in v4.0.x for the following hashes: { "HMACSHA1", FR_SSHA_PASSWORD }, { "HMACSHA2+224", FR_SSHA2_224_PASSWORD }, { "HMACSHA2+256", FR_SSHA2_256_PASSWORD }, { "HMACSHA2+384", FR_SSHA2_384_PASSWORD }, { "HMACSHA2+512", FR_SSHA2_512_PASSWORD }, Format of hash string currently supported is the ‘ldap’ format from the CPAN library Crypt::PBKDF2: {hash_algorithm}:base64(iterations):base64(salt):base64(hash) ...but there doesn’t seem to be a standard for the hash string format. Ideally we’d like to add support for common generators of PBKDF2 strings out of the box, in addition to allowing people to support their own via unlang policies. …so can anyone suggest what the common formats for PBKDF2 might be? -Arran

2 5

PPA update for 3.0.15 ?
by Brian Candler 28 Jul '17

28 Jul '17

Now that 3.0.15 has been released, would someone have time to rebuild the Ubuntu PPA package? https://launchpad.net/~freeradius/+archive/ubuntu/stable-3.0 It hasn't been updated since 3.0.12. Xenial is the one I'm specifically interested in. Thanks, Brian.

3 3

How to do FreeRADIUS understand the ssh encrypted password that is passed?
by Kalil de A. Carvalho 27 Jul '17

27 Jul '17

Hello all. It is me again. Sorry for that. I have my enviroment working fine for telnet access, my FreeRADIUS server is doing the user search on LDAP with no problem but, when I use any ssh session is passed a encryped password that RADIUS try to use with LDAP database, found the user but the password is considered wrong and regect my access. I searched for configuration and what I saw it is very similar whith I have here. The unic diference is that I am using a EdgeRouter Lite but I am folling the documentation and using the GUI tool. Can any one help me? Best regards. -- Atenciosamente, Kalil de A. Carvalho

2 3

About authorizing only users with specific attributes (post RADIUS proxy)
by Seiichirou Hiraoka 27 Jul '17

27 Jul '17

I am building RADIUS Proxy with FreeRADIUS 3.0.4. @mydomain.edu -> backendradius.mydomain.com All Other domains -> radius.otherdomain.com RADIUS server of mydomain.com which is its own domain is already built separately, and the server under construction wants to do RADIUS Proxy with the above two rules. For mydomain.com only, I would like to authorize users who have a specific character string in the RADIUS standard attribute Filter-Id. In this case, where should we determine the value of Filter-Id in the RADIUS response from backendradius.mydomain.com? Would you please let me know if you have any reference information, such as a conditional expression with unlang. Thank you.

2 2