- Freeradius-Users - lists.freeradius.org

upgrade unlang from 2.1.12 to 3.0.14
by adrian.p.smith＠bt.com 07 Jul '17

07 Jul '17

We have a fairly complex configuration running on an ageing 2.1.12 version of FreeRadius. We are looking to upgrade to latest 3.0.14 for various reasons. I'm having some issues with some of the unlang and would be grateful for some clarification please? We have config similar to: if ( !(Cisco-SSG-Service-Info) && ("%{Tunnel-Type}" != "VLAN") ) { ... } and if ( ("%{Acct-Status-Type}" == "Stop") && ("%{Tunnel-Type}" == "VLAN") && ("%{client:operator}" != "WLC") ) { ... } But are seeing error messages such as: ERROR: Failed retrieving values required to evaluate condition So questions are: 1. Testing presence of an attribute I think is now "if ( &Cisco-SSG-Service-Info )" ? 2. Can I test presence of and value of an attribute of a variable at the same time, i.e. "if (&Cisco-SSG-Service-Info = "fred" )" ? 3. How can I now do "client:operator" ? Thanks Adrian

4 13

Windows mobile unable to authenticate [FreeRadius+Active directory]
by Burn Zero 07 Jul '17

07 Jul '17

Hi, FreeRadius version 3.0.13 We are using FreeRadius+Active directory setup in our environment to authenticate users for the WIFI. The clients are authenticated using server side cert + their Active directory credentials. This is working properly except windows phone users. Users who own windows phone are unable to authenticate via Freeradius. Below is the debug error log when they try to connect WIFI. (5829) Mon Jun 5 07:53:43 2017: Debug: eap: Calling submodule eap_peap to process data (5829) Mon Jun 5 07:53:43 2017: Debug: eap_peap: Continuing EAP-TLS (5829) Mon Jun 5 07:53:43 2017: Debug: eap_peap: [eaptls verify] = ok (5829) Mon Jun 5 07:53:43 2017: Debug: eap_peap: Done initial handshake (5829) Mon Jun 5 07:53:43 2017: Debug: eap_peap: [eaptls process] = ok (5829) Mon Jun 5 07:53:43 2017: Debug: eap_peap: Session established. Decoding tunneled attributes (5829) Mon Jun 5 07:53:43 2017: Debug: eap_peap: PEAP state send tlv success (5829) Mon Jun 5 07:53:43 2017: Debug: eap_peap: Received EAP-TLV response (5829) Mon Jun 5 07:53:43 2017: Debug: eap_peap: Client rejected our response. The password is probably incorrect (5829) Mon Jun 5 07:53:43 2017: ERROR: eap_peap: We sent a success, but the client did not agree (5829) Mon Jun 5 07:53:43 2017: ERROR: eap: Failed continuing EAP PEAP (25) session. EAP sub-module failed (5829) Mon Jun 5 07:53:43 2017: Debug: eap: Sending EAP Failure (code 4) ID 11 length 4 (5829) Mon Jun 5 07:53:43 2017: Debug: eap: Failed in EAP select Does any one of you know what the problem is? Thank in advance for the help.

3 8

FreeRADIUS 3.0.12, Ubuntu 16.04 - Python module is unable to load
by Cuong Nguyen 05 Jul '17

05 Jul '17

Hi, I am trying to develop a python module and hook it into FreeRADIUS. The module supposes to query LDAP for some specific parameters and allows or rejects user's access based on the result. For some reasons, whenever I try to import ldap3 module ( http://ldap3.readthedocs.io) I encounter this issue: Python version: 2.7.12 (default, Nov 19 2016, 06:48:10) [GCC 5.4.0 20160609] python_function_load - Module 'session_limit' not found <class 'ldap3.core.exceptions.LDAPSSLNotSupportedError'> (SSL not supported in this Python interpreter) python_function_load - Failed to import python function 'session_limit.instantiate' /etc/freeradius/mods-enabled/python[9]: Instantiation failed for module "python" Remove the import in the module, it works fine. Is there anything I could do to solve this? With the same script I can run using normal python environment (the script has the import ldap3). Below is the debug with import ldap3 root@rad01:/etc/freeradius/mods-config/python# freeradius -X FreeRADIUS Version 3.0.12 Copyright (C) 1999-2016 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/dictionary including configuration file /etc/freeradius/radiusd.conf including configuration file /etc/freeradius/proxy.conf including configuration file /etc/freeradius/clients.conf including files in directory /etc/freeradius/mods-enabled/ including configuration file /etc/freeradius/mods-enabled/detail including configuration file /etc/freeradius/mods-enabled/echo including configuration file /etc/freeradius/mods-enabled/cache_eap including configuration file /etc/freeradius/mods-enabled/sql including configuration file /etc/freeradius/mods-config/sql/main/mysql/queries.conf including configuration file /etc/freeradius/mods-enabled/digest including configuration file /etc/freeradius/mods-enabled/attr_filter including configuration file /etc/freeradius/mods-enabled/linelog including configuration file /etc/freeradius/mods-enabled/unpack including configuration file /etc/freeradius/mods-enabled/logintime including configuration file /etc/freeradius/mods-enabled/replicate including configuration file /etc/freeradius/mods-enabled/mschap including configuration file /etc/freeradius/mods-enabled/python including configuration file /etc/freeradius/mods-enabled/soh including configuration file /etc/freeradius/mods-enabled/radutmp including configuration file /etc/freeradius/mods-enabled/chap including configuration file /etc/freeradius/mods-enabled/always including configuration file /etc/freeradius/mods-enabled/eap including configuration file /etc/freeradius/mods-enabled/detail.log including configuration file /etc/freeradius/mods-enabled/pap including configuration file /etc/freeradius/mods-enabled/preprocess including configuration file /etc/freeradius/mods-enabled/utf8 including configuration file /etc/freeradius/mods-enabled/sradutmp including configuration file /etc/freeradius/mods-enabled/expiration including configuration file /etc/freeradius/mods-enabled/files including configuration file /etc/freeradius/mods-enabled/ntlm_auth including configuration file /etc/freeradius/mods-enabled/date including configuration file /etc/freeradius/mods-enabled/exec including configuration file /etc/freeradius/mods-enabled/ldap including configuration file /etc/freeradius/mods-enabled/realm including configuration file /etc/freeradius/mods-enabled/dynamic_clients including configuration file /etc/freeradius/mods-enabled/expr including configuration file /etc/freeradius/mods-enabled/unix including configuration file /etc/freeradius/mods-enabled/passwd including files in directory /etc/freeradius/policy.d/ including configuration file /etc/freeradius/policy.d/operator-name including configuration file /etc/freeradius/policy.d/filter including configuration file /etc/freeradius/policy.d/control including configuration file /etc/freeradius/policy.d/abfab-tr including configuration file /etc/freeradius/policy.d/canonicalization including configuration file /etc/freeradius/policy.d/eap including configuration file /etc/freeradius/policy.d/accounting including configuration file /etc/freeradius/policy.d/cui including configuration file /etc/freeradius/policy.d/debug including configuration file /etc/freeradius/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/policy.d/dhcp including files in directory /etc/freeradius/sites-enabled/ including configuration file /etc/freeradius/sites-enabled/control-socket including configuration file /etc/freeradius/sites-enabled/default main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = yes auth_badpass = yes auth_goodpass = no msg_badpass = "Password is wrong" colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm starhub.com { auth_pool = my_auth_failover } realm LOCAL { } realm ~(.*\.)*webspeed\.com.sg$ { auth_pool = my_auth_failover } realm ~(.*\.)*starhub\.com$ { auth_pool = my_auth_failover } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 192.168.254.1 { ipaddr = 192.168.254.1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client private-network-2 { ipaddr = 61.0.240.0/24 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_detail # Loading module "detail" from file /etc/freeradius/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_exec # Loading module "echo" from file /etc/freeradius/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_sql # Loading module "sql" from file /etc/freeradius/mods-enabled/sql sql { driver = "rlm_sql_mysql" server = "localhost" port = 3306 login = "radius" password = <<< secret >>> radius_db = "radius" read_groups = yes read_profiles = yes read_clients = no delete_stale_sessions = yes sql_user_name = "%{User-Name}" logfile = "/var/log/freeradius/sqllog.sql" default_user_profile = "" client_query = "SELECT id, nasname, shortname, type, secret, server FROM nas" authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id" authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id" group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority" simul_count_query = "SELECT COUNT(*) FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" query_timeout = 5 accounting { reference = "%{tolower:type.%{Acct-Status-Type}.query}" type { accounting-on { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})" } accounting-off { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})" } start { query = "INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}', FROM_UNIXTIME(%{integer:Event-Timestamp}), FROM_UNIXTIME(%{integer:Event-Timestamp}), NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}')" } interim-update { query = "UPDATE radacct SET acctupdatetime = (@acctupdatetime_old:=acctupdatetime), acctupdatetime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctinterval = %{integer:Event-Timestamp} - UNIX_TIMESTAMP(@acctupdatetime_old), framedipaddress = '%{Framed-IP-Address}', acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'" } stop { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'" } } } post-auth { reference = ".query" query = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')" } } rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked Creating attribute SQL-Group # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/mods-enabled/digest # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/mods-enabled/unpack # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/mods-enabled/replicate # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes } # Loaded module rlm_python # Loading module "python" from file /etc/freeradius/mods-enabled/python python { mod_instantiate = "session_limit" func_instantiate = "instantiate" mod_authorize = "session_limit" func_authorize = "authorize" mod_authenticate = "session_limit" func_authenticate = "authenticate" mod_preacct = "session_limit" func_preacct = "preacct" mod_accounting = "session_limit" func_accounting = "accounting" mod_checksimul = "session_limit" func_checksimul = "checksimul" mod_pre_proxy = "session_limit" func_pre_proxy = "pre_proxy" mod_post_proxy = "session_limit" func_post_proxy = "post_proxy" mod_post_auth = "session_limit" func_post_auth = "post_auth" mod_recv_coa = "session_limit" func_recv_coa = "recv_coa" mod_send_coa = "session_limit" func_send_coa = "send_coa" mod_detach = "session_limit" func_detach = "instantiate" python_path = "/etc/freeradius/mods-config/python:/usr/lib/python2.7/dist-packages/:/usr/lib/python2.7/" cext_compat = yes } # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/freeradius/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/mods-enabled/chap # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loading module "auth_log" from file /etc/freeradius/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/mods-enabled/utf8 # Loading module "sradutmp" from file /etc/freeradius/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/mods-enabled/expiration # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/mods-enabled/files files { filename = "/etc/freeradius/mods-config/files/authorize" acctusersfile = "/etc/freeradius/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/mods-config/files/pre-proxy" } # Loading module "ntlm_auth" from file /etc/freeradius/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_date # Loading module "date" from file /etc/freeradius/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" } # Loading module "exec" from file /etc/freeradius/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_ldap # Loading module "ldap" from file /etc/freeradius/mods-enabled/ldap ldap { server = "192.168.254.110" port = 389 identity = "cn=admin,dc=starhub,dc=com" password = <<< secret >>> sasl { } user { scope = "sub" access_positive = yes sasl { } } group { filter = "(objectClass=posixGroup)" scope = "sub" name_attribute = "cn" membership_attribute = "memberOf" cacheable_name = no cacheable_dn = no } client { filter = "(objectClass=radiusClient)" scope = "sub" base_dn = "ou=Adsl-User,o=webspeed.com.sg,dc=starhub,dc=com" } profile { } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 1 res_timeout = 10 srv_timelimit = 3 idle = 60 probes = 3 interval = 3 } tls { start_tls = no } } Creating attribute LDAP-Group # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/mods-enabled/dynamic_clients # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } instantiate { } # Instantiating module "detail" from file /etc/freeradius/mods-enabled/detail # Instantiating module "cache_eap" from file /etc/freeradius/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "sql" from file /etc/freeradius/mods-enabled/sql rlm_sql_mysql: libmysql version: 5.7.18 mysql { tls { } warnings = "auto" } rlm_sql (sql): Attempting to connect to database "radius" rlm_sql (sql): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_sql (sql): Opening additional connection (0), 1 of 32 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.7.18-0ubuntu0.16.04.1, protocol version 10 rlm_sql (sql): Opening additional connection (1), 1 of 31 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.7.18-0ubuntu0.16.04.1, protocol version 10 rlm_sql (sql): Opening additional connection (2), 1 of 30 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.7.18-0ubuntu0.16.04.1, protocol version 10 rlm_sql (sql): Opening additional connection (3), 1 of 29 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.7.18-0ubuntu0.16.04.1, protocol version 10 rlm_sql (sql): Opening additional connection (4), 1 of 28 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.7.18-0ubuntu0.16.04.1, protocol version 10 # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/access_reject [/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/accounting_response # Instantiating module "linelog" from file /etc/freeradius/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/mods-enabled/linelog # Instantiating module "logintime" from file /etc/freeradius/mods-enabled/logintime # Instantiating module "mschap" from file /etc/freeradius/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "python" from file /etc/freeradius/mods-enabled/python Python version: 2.7.12 (default, Nov 19 2016, 06:48:10) [GCC 5.4.0 20160609] python_function_load - Module 'session_limit' not found <class 'ldap3.core.exceptions.LDAPSSLNotSupportedError'> (SSL not supported in this Python interpreter) python_function_load - Failed to import python function 'session_limit.instantiate' /etc/freeradius/mods-enabled/python[9]: Instantiation failed for module "python" root@rad01:/etc/freeradius/mods-config/python#

4 5

Freeradius request IP Addres another DHCP Server [Complete Subject]
by Jean Tomaz 05 Jul '17

05 Jul '17

Hi, It's possbile to configure the topology bellow: [Client PPPoE>]<----->[NAS PPPoE]<----->[Freeradius]<----->[ISC DHCP Server] 1) The client pppoe resquest acess to NAS. 2) The NAS forward request the access to Freeradius. 3) The Freeradius authenticate the client and request the IP Address to ISC DHCP Server 4) The Freeradius will response to NAS with fields bellow(example): Auth-Type := Accept, Service-Type = Framed-User, Framed-Protocol = PPP, Framed-IP-Address = {IP Address Assigned by ISC DHCP Server}, Framed-IP-Netmask = {Netmask Assigned by ISC DHCP Server} I wan't to use mysql with backend(ippool). My freeradius version is 2.2.5.(Raspbian GNU/Linux 8 - Jessie) used in my test enviroment. Best regards, Jean

1 0

Freeradius request IP Addres another DHCP Server
by Jean Tomaz 05 Jul '17

05 Jul '17

Hi, It's possbile the topology bellow: <Client PPPoE> -----------<NAS PPPoE> ------------< Freeradius>--------------<ISC DHCP Server> 1) The client pppoe resquest acess to NAS. 2) The NAS forward request the access to Freeradius. 3) The Freeradius authenticate the client and request the IP Address to ISC DHCP Server 4) The Freeradius response to NAS with fields bellow:

2 1

Changes to the project: Matthew Newton
by Alan DeKok 05 Jul '17

05 Jul '17

We're happy to announce that as of today, Matthew Newton has joined FreeRADIUS as a full-time contributor. Matthew will be working on updating the web site, documentation, and assisting with the changes coming in version 4. Matthew has made significant contributions in the last few year, and we believe his assistance will help make the project better. Alan DeKok.

4 3

Update on v4
by Alan DeKok 04 Jul '17

04 Jul '17

There have been a lot of changes to the v4.0.x branch in the last few weeks. I thought I'd take some time to give people updates as to what's happening, and what our plans are. As background, we've been working on re-designing the internals to remove RADIUS from the server core, and put it into a plug-in module. This change makes many things simpler. It lets DHCP change from a hack on top of RADIUS to a full-fledged protocol on par with RADIUS. It lets us add many more protocols, with much less effort than before. The changes mean that in the short term, the old-style "listen" sections go away, and are replaced with new-style "listen" sections. An unfortunate side-effect is that proxying is temporarily disabled, along with the "originate coa" functionality. The good news is that basic proxying is only a day or two effort away. And once that's done, the "originate coa" functionality become about 20 lines of "unlang" configuration. Where in v3, it was hundreds of lines of C code in the server core. Our tentative plan is to have an alpha release of v4 this year. We can then have official releases once we've made a bit more progress. Alan DeKok.

3 4

Two Auth-Types found but only one defined.
by Cooper, Tom 04 Jul '17

04 Jul '17

Hi All, I get this error when running freeradius in debug mode: (6) Found Auth-Type = ntlm_auth (6) Found Auth-Type = Accept (6) ERROR: Warning: Found 2 auth-types on request for user. (6) Auth-Type = Accept, accepting the user Auth-Type Accept is not defined anywhere. Also, when I test against radius using radclient it works fine, but when I test against it using an Azure client, for instance, it mangles the password completely. Installed version is freeradius-3.0.4-8.el7_3.x86_64 Regards, To read FirstRand Bank's Disclaimer for this email click on the following address or copy into your Internet browser: https://www.fnb.co.za/about-fnb/legal-matters/email-disclaimer.html If you are unable to access the Disclaimer, send a blank e-mail to firstrandbankdisclaimer(a)fnb.co.za and we will send you a copy of the Disclaimer.

2 1

load balanced freeradius
by Andrew Meyer 03 Jul '17

03 Jul '17

Is there a way to setup FreeRADIUS with HAProxy? I know that FreeRADIUS can do TCP. But is it worth it to set it up like this or just setup the mysql backend? Also can I do mysql backend with LDAP? Thank you!

3 3

Change username for MSCHAPv2
by Gabriele Verzeletti 03 Jul '17

03 Jul '17

Hello, I have a freeradius 3.0.10-1.1 running on openSUSE leap. I need to authenticate users for WiFi access WPA2 Enterprise, using PEAP and MSCHAPv2 against Active directory. User account are identified by userPrinciplaName, but ntlm_auth is not able to authenticate using this attribute, it looks into samAccountName. With an external script I'm able to performa a query on active directory and retrieve the samAccountName, but if I update the attribute User-Name using authorize { update request { User-Name := `/path/to/my/script '%{User-Name}'` } .. .. .. I have an error in the log (0) # Executing group from file /etc/raddb/sites-enabled/default (0) authenticate { (0) eap: Identity does not match User-Name, setting from EAP Identity (0) eap: Failed in handler (0) [eap] = invalid (0) } # authenticate = invalid Is there any way to perform this account translation before send request to EAP ? Thanks to all Gab

3 7