- Freeradius-Users - lists.freeradius.org

Install freeradius3.0.12 on ubuntu´s systemd and enable it on startup
by Paulo Rodrigues 08 May '17

08 May '17

Hi to everyone, I have a FreeRadius server (v3.0.12) running in my network (on a Ubuntu 16.04) and everything is fine. The only problem I am facing at the moment is to enable it in systemd to init on startup. I built it from source and copy the file rc.radiusd from /usr/local/sbin to /etc/init.d/radiusd to let it works with systemctl commands. I noticed that there are some files in the freeradius-3.0.12 folder (freeradius-3.0.12/debian) but I do not know how to install them in systemd. Can somebody help me to install freeradius-3.0.12 on systemd (build from source on ubuntu 16.04) and enable it on startup? Best regards, Paulo. Call Send SMS Add to Skype You'll need Skype CreditFree via Skype

2 1

Freeradius with existing asp.net identity DB
by Simon Coy 08 May '17

08 May '17

Hello, I would like to attach a Freeradius instance to an existing database of users/passwords. ASP.net identity stores passwords with the following hashing specification: * PBKDF2 with HMAC-SHA256, 128-bit salt, 256-bit subkey, 10000 iterations. * Format: { 0x01, prf (UInt32), iter count (UInt32), salt length (UInt32), salt, subkey } * (All UInt32s are stored big-endian.) Does anybody know if this is compatible with Freeradius out of the box? I can see from the docs that SHA-2 is supported but it's not clear to me whether the above configuration will work. Many thanks, Simon

2 1

pam_radius_auth delay
by Steve Phillips 07 May '17

07 May '17

Hi There, I've just setup pam_radius_auth and it is working, however there seems to be a weird 20 second delay for no apparent reason between getting the password from the prompt and sending the authentication request to the RADIUS server. The version of pam_radius_auth is 1.4.0 obtained from the CentOS 7 EPEL repository I have entries for the RADIUS server in /etc/hosts but have tried both a hostname and an IP address in /etc/pam_radius.conf and the effect is the same. My sshd pam entries are set as follows -- begin snippet -- auth [success=ignore default=1] pam_succeed_if.so debug user ingroup radius auth required pam_radius_auth.so debug conf=/etc/pam_radius.conf auth required pam_sepermit.so auth substack password-auth auth include postlogin -- end -- The logs are as follows -- begin logs -- Apr 28 16:09:40 bastion sshd[9197]: pam_radius_auth: Got user name stevetest Apr 28 16:09:40 bastion sshd[9197]: pam_radius_auth: ignore last_pass, force_prompt set Apr 28 16:10:00 bastion sshd[9197]: pam_radius_auth: Sending RADIUS request code 1 Apr 28 16:10:00 bastion sshd[9197]: pam_radius_auth: DEBUG: getservbyname(radius, udp) returned 0x7f05695fa1c0. Apr 28 16:10:00 bastion sshd[9197]: pam_radius_auth: Got RADIUS response code 2 Apr 28 16:10:00 bastion sshd[9197]: pam_radius_auth: authentication succeeded -- end logs -- and the server entry is (less the lines starting with a #) # cat /etc/pam_radius.conf | egrep -v ^# auth1 somesecret 3 172.28.208.169:1812 somesecret 3 (If I comment auth1 out the effect is identical - a 20 second delay) The 20 seconds sounds like a timeout of some sort but I'm at a bit of a loss what this would be. Just wondering if anyone else has come across this? OS: CentOS 7.3.1611, minimal installation, patched to whatever the latest patch cluster was as of a week ago. Any ideas would be appreciated, Cheers, -- Steve.

4 7

add quote to User-Name
by Dudás Péter 07 May '17

07 May '17

Hi, for running external script I have to quote the content of the User-Name (via the Exec module). So in case User-Name is John Doe (received from NPS) I want to have it like "John Doe". Tried: User-Name := "%{User-Name}" # this is not working. Is there a way to do this? Thank you! Peter Dudas

2 4

PAP or CHAP implementation
by Peter Sprenger 05 May '17

05 May '17

Hello, I have implemented an embedded client that sends authentication requests either with User-Password (Attr Type 2) or CHAP-Password (Attr Type 3). This works perfectly, the requests are accepted or rejected from FreeRadius. 1. But how is User-Password (Attr Type 2) declared? Is this PAP? It don't seems so, since in all descriptions PAP means plain text, and the User-Password is MD5'ed with random authenticator and shared secret. How to label this authentication for the client user? 2. When I use CHAP-Password (Attr Type 3) in the request it works without problems. But shouldn't this attribute part of a Challenge Response? How can I activate that? Since I wrote my own client, I want a clean implementation and make no mistakes. Best Regards, Peter - ------------------ Moving Bytes Communications, Systementwicklung GmbH Geschäftsführer Peter Sprenger Carl-Sutor-Str.26 D-50226 Frechen Germany Registergericht: Amtsgericht Köln, HRB 30047 Ust-IDNr.: DE195140727 Tel.: +49/2234/430-9207 Fax.: +49/2234/430-9205 Email: sprenger(a)moving-bytes.de http://www.moving-bytes.de

2 1

FreeRADIUS meeting Ottawa, Canada
by Alan DeKok 05 May '17

05 May '17

We're having a FreeRADIUS meeting in Ottawa, Canada, May 29 - June 2. So far, we have me, Arran, Alex Clouter, Matthew Newton, and a few other people involved. The agenda is largely "get together and talk about FreeRADIUS", with an emphasis on v4. Anyone local (or non-local) is welcome to join. Alan DeKok.

1 0

PPPoE subscriber management
by Marijn van Gool 05 May '17

05 May '17

Hello folks, I have set up and configured PPPoE subscriber management on my Juniper MX80 router. I’m using FreeRadius version 2.1.12. I know it’s old and we’re planning on upgrading it soon. A PPPoE client successfully authenticates using PAP and sends out a Framed-IP-Address (10.120.120.10) in the Access-Accept message back to the router: Ready to process requests. rad_recv: Access-Request packet from host 185.85.83.150 port 52772, id=174, length=158 User-Name = "pppoe-test" User-Password = "1234" Service-Type = Framed-User Framed-Protocol = PPP Chargeable-User-Identity = "" Acct-Session-Id = "121184" ERX-Dhcp-Mac-Addr = "6c3b.6b8b.760d" NAS-Identifier = "MX5-Kantoor" NAS-Port = 272630560 NAS-Port-Id = "ge-1/1/1.demux0.1073863004:800" NAS-Port-Type = Ethernet NAS-IP-Address = 185.85.83.150 # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "pppoe-test", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] No EAP-Message, not doing EAP ++[eap] returns noop [sql] expand: %{User-Name} -> pppoe-test [sql] sql_set_user escaped user --> 'pppoe-test' rlm_sql (sql): Reserving sql socket id: 2 [sql] expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'pppoe-test' ORDER BY id rlm_sql_mysql: query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'pppoe-test' ORDER BY id [sql] User found in radcheck table [sql] expand: SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'pppoe-test' ORDER BY id rlm_sql_mysql: query: SELECT id, username, attribute, value, op FROM radreply WHERE username = 'pppoe-test' ORDER BY id [sql] expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = 'pppoe-test' ORDER BY priority rlm_sql_mysql: query: SELECT groupname FROM radusergroup WHERE username = 'pppoe-test' ORDER BY priority rlm_sql (sql): Released sql socket id: 2 ++[sql] returns ok ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns updated Found Auth-Type = PAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group PAP {...} [pap] login attempt with password "1234" [pap] Using clear text password "1234" [pap] User authenticated successfully ++[pap] returns ok # Executing section post-auth from file /etc/freeradius/sites-enabled/default +- entering group post-auth {...} [sql] expand: %{User-Name} -> pppoe-test [sql] sql_set_user escaped user --> 'pppoe-test' [sql] expand: %{User-Password} -> 1234 [sql] expand: INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S') -> INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'pppoe-test', '1234', 'Access-Accept', '2017-05-05 13:36:48') [sql] expand: /var/log/freeradius/sqltrace.sql -> /var/log/freeradius/sqltrace.sql rlm_sql (sql) in sql_postauth: query is INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'pppoe-test', '1234', 'Access-Accept', '2017-05-05 13:36:48') rlm_sql (sql): Reserving sql socket id: 1 rlm_sql_mysql: query: INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'pppoe-test', '1234', 'Access-Accept', '2017-05-05 13:36:48') rlm_sql (sql): Released sql socket id: 1 ++[sql] returns ok ++[exec] returns noop Sending Access-Accept of id 174 to 185.85.83.150 port 52772 Framed-IP-Address = 10.120.120.10 Finished request 17. Going to the next request The MX80 feels like the FreeRadius server is dead / unreachable, while the connectivity is just fine. Without using PAP and with using an address pool on the router itself, all works fine. But I want to specify the IP address my users get. Is there a different RADIUS VSA I need to use in this regard? Met vriendelijke groet \ With kind regards, Marijn van Gool Network Engineer +31 88 999 5555 marijn.vangool(a)comsave.com <mailto:marijn.vangool@comsave.com> www.comsave.nl <http://www.comsave.nl/>

4 4

Defining trusted root ca for ldaps server cert validation
by Philipp Trenz 04 May '17

04 May '17

Hi there, I’m searching where to define the trusted root ca for validation of the SSL certificate on ldaps connections (FR 3.0.12 with CentOS 7). I added the root ca to the system and tested ldaps connection with 'openssl s_client -connect my_ldap_server_IP:636 -CApath /etc/pki/tls/certs‘ and it returns 'Verify return code: 19 (self signed certificate in certificate chain)‘. Then I tested the trusted root ca’s at the system to be sure the correct ca’s are there with ... awk -v cmd='openssl x509 -noout -subject' \ '/BEGIN/{close(cmd)};{print | cmd}' \ < /etc/pki/tls/certs/ca-bundle.crt … and the CA is listed. Am I doing something wrong or is it a OpenSSL issue? Do I have to (or is it possible to) define the trusted root ca within Freeradius? I also didn’t quite understand what the tls section in mods-enabled/ldap is for. As far as I know ldap clients don’t need a client certificate except the LDAP configuration requires it. And in my case it isn’t. When I let ‚ca_file‘ point to my root ca, i get the following: TLS: could not add the certificate '/usr/local/etc/raddb/certs/cacert.crt' - error -8018:Unknown PKCS #11 error.. TLS: /usr/local/etc/raddb/certs/cacert.crt is not a valid CA certificate file - error -8018:Unknown PKCS #11 error.. TLS: could not perform TLS system initialization. TLS: error: could not initialize moznss security context - error -8018:Unknown PKCS #11 error. TLS: can't create ssl handle. I have to admit I’m not practiced with PKI. Thanks so much for help!

3 2

Loop in sites-enabled/default
by Carlo Musante 04 May '17

04 May '17

Hello, Working on a new server and trying to get wireless authentication working with LDAP. Radtest works from the server using PAP, so the LDAP lookup is working. When the authethentication request comes from the wireless client, it does not look like the password is being checked against LDAP. Authentication gets rejected here. Struggling to find the problem. eap : Freeing handler [eap] = reject } # authenticate = reject Failed to authenticate the user Using Post-Auth-Type Reject # Executing group from file /etc/raddb/sites-enabled/inner-tunnel Post-Auth-Type REJECT { attr_filter.access_reject : EXPAND %{User-Name} attr_filter.access_reject : --> zz9930 attr_filter.access_reject : Matched entry DEFAULT at line 11 [attr_filter.access_reject] = updated } # Post-Auth-Type REJECT = updated Any help would be very much appreciated. Radiusd -X startup output and subsequent log included below. Carlo radtest zz9930 -t pap ******** localhost 10 testing123 Sending Access-Request Id 209 from 0.0.0.0:46670 to 127.0.0.1:1812 User-Name = 'zz9930' User-Password = '********' NAS-IP-Address = 141.217.0.164 NAS-Port = 10 Message-Authenticator = 0x00 Received Access-Accept Id 209 from 127.0.0.1:1812 to 127.0.0.1:46670 length 20 Received Access-Request Id 209 from 127.0.0.1:46670 to 127.0.0.1:1812 length 76 User-Name = 'zz9930' User-Password = '********' NAS-IP-Address = 141.217.0.164 NAS-Port = 10 Message-Authenticator = 0x288132b2444fb169ac902f52169603f6 (0) Received Access-Request packet from host 127.0.0.1 port 46670, id=209, length=76 (0) User-Name = 'zz9930' (0) User-Password = '********' (0) NAS-IP-Address = 141.217.0.164 (0) NAS-Port = 10 (0) Message-Authenticator = 0x288132b2444fb169ac902f52169603f6 (0) # Executing section authorize from file /etc/raddb/sites-enabled/default (0) authorize { (0) filter_username filter_username { (0) if (!&User-Name) (0) if (!&User-Name) -> FALSE (0) if (&User-Name =~ / /) (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@.*@/ ) (0) if (&User-Name =~ /@.*@/ ) -> FALSE (0) if (&User-Name =~ /\\.\\./ ) (0) if (&User-Name =~ /\\.\\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\\.(.+)$/)) (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\\.$/) (0) if (&User-Name =~ /\\.$/) -> FALSE (0) if (&User-Name =~ /(a)\\./) (0) if (&User-Name =~ /(a)\\./) -> FALSE (0) } # filter_username filter_username = notfound (0) [preprocess] = ok (0) operator-name.authorize operator-name.authorize { (0) if ("%{client:Operator-Name}") (0) Client does not contain config item "Operator-Name" (0) EXPAND %{client:Operator-Name} (0) --> (0) if ("%{client:Operator-Name}") -> FALSE (0) } # operator-name.authorize operator-name.authorize = ok (0) [chap] = noop (0) [mschap] = noop (0) suffix : Checking for suffix after "@" (0) suffix : No '@' in User-Name = "zz9930", looking up realm NULL (0) suffix : No such realm "NULL" (0) [suffix] = noop (0) eap : No EAP-Message, not doing EAP (0) [eap] = noop rlm_ldap (ldap): Reserved connection (4) (0) ldap : EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (0) ldap : --> (uid=zz9930) (0) ldap : EXPAND dc=wayne,dc=edu (0) ldap : --> dc=wayne,dc=edu (0) ldap : Performing search in 'dc=wayne,dc=edu' with filter '(uid=zz9930)', scope 'sub' (0) ldap : Waiting for search result... (0) ldap : User object found at DN "uid=zz9930,ou=People,dc=wayne,dc=edu" (0) ldap : Processing user attributes (0) ldap : control:Password-With-Header += '{SSHA}US4ZGbcPi1X61YzS9qQX1cmjDLXdV1I8yiqWbw==' rlm_ldap (ldap): Released connection (4) (0) [ldap] = ok (0) [expiration] = noop (0) [logintime] = noop (0) [pap] = updated (0) } # authorize = updated (0) Found Auth-Type = PAP (0) # Executing group from file /etc/raddb/sites-enabled/default (0) Auth-Type PAP { (0) pap : Login attempt with password (0) pap : Comparing with "known-good" SSHA-Password (0) pap : Normalizing SSHA1-Password from base64 encoding, 40 bytes -> 28 bytes (0) pap : User authenticated successfully (0) [pap] = ok (0) } # Auth-Type PAP = ok (0) # Executing section post-auth from file /etc/raddb/sites-enabled/default (0) post-auth { (0) [exec] = noop (0) remove_reply_message_if_eap remove_reply_message_if_eap { (0) if (&reply:EAP-Message && &reply:Reply-Message) (0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (0) else else { (0) [noop] = noop (0) } # else else = noop (0) } # remove_reply_message_if_eap remove_reply_message_if_eap = noop (0) } # post-auth = noop (0) Sending Access-Accept packet to host 127.0.0.1 port 46670, id=209, length=0 Sending Access-Accept Id 209 from 127.0.0.1:1812 to 127.0.0.1:46670 (0) Finished request Waking up in 0.3 seconds. Waking up in 4.6 seconds. (0) Cleaning up request packet ID 209 with timestamp +9 Ready to process requests Running on RHEL 7. radiusd: FreeRADIUS Version 3.0.4, for host x86_64-redhat-linux-gnu, built on Jan 17 2017 at 10:28:38 Copyright (C) 1999-2014 The FreeRADIUS server project and contributors radius3 raddb]$ grep -v \# sites-available/default | grep -v ^$ server default { listen { type = auth ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { ipaddr = * port = 0 type = acct limit { } } listen { type = auth port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { ipv6addr = :: port = 0 type = acct limit { } } authorize { filter_username preprocess operator-name chap mschap suffix eap { ok = return } -sql ldap expiration logintime pap } authenticate { Auth-Type PAP { pap } eap } preacct { preprocess acct_unique suffix files } accounting { detail -sql exec attr_filter.accounting_response } session { } post-auth { -sql exec remove_reply_message_if_eap Post-Auth-Type REJECT { -sql attr_filter.access_reject eap remove_reply_message_if_eap } } pre-proxy { } post-proxy { eap } } sudo radiusd -X radiusd: FreeRADIUS Version 3.0.4, for host x86_64-redhat-linux-gnu, built on Jan 17 2017 at 10:28:38 Copyright (C) 1999-2014 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/raddb/dictionary including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/mods-enabled/ including configuration file /etc/raddb/mods-enabled/always including configuration file /etc/raddb/mods-enabled/attr_filter including configuration file /etc/raddb/mods-enabled/cache_eap including configuration file /etc/raddb/mods-enabled/chap including configuration file /etc/raddb/mods-enabled/detail including configuration file /etc/raddb/mods-enabled/detail.log including configuration file /etc/raddb/mods-enabled/dhcp including configuration file /etc/raddb/mods-enabled/digest including configuration file /etc/raddb/mods-enabled/dynamic_clients including configuration file /etc/raddb/mods-enabled/eap including configuration file /etc/raddb/mods-enabled/echo including configuration file /etc/raddb/mods-enabled/exec including configuration file /etc/raddb/mods-enabled/expiration including configuration file /etc/raddb/mods-enabled/expr including configuration file /etc/raddb/mods-enabled/files including configuration file /etc/raddb/mods-enabled/linelog including configuration file /etc/raddb/mods-enabled/logintime including configuration file /etc/raddb/mods-enabled/mschap including configuration file /etc/raddb/mods-enabled/ntlm_auth including configuration file /etc/raddb/mods-enabled/pap including configuration file /etc/raddb/mods-enabled/passwd including configuration file /etc/raddb/mods-enabled/preprocess including configuration file /etc/raddb/mods-enabled/radutmp including configuration file /etc/raddb/mods-enabled/realm including configuration file /etc/raddb/mods-enabled/replicate including configuration file /etc/raddb/mods-enabled/soh including configuration file /etc/raddb/mods-enabled/sradutmp including configuration file /etc/raddb/mods-enabled/unix including configuration file /etc/raddb/mods-enabled/unpack including configuration file /etc/raddb/mods-enabled/utf8 including configuration file /etc/raddb/mods-enabled/ldap including files in directory /etc/raddb/policy.d/ including configuration file /etc/raddb/policy.d/accounting including configuration file /etc/raddb/policy.d/canonicalization including configuration file /etc/raddb/policy.d/control including configuration file /etc/raddb/policy.d/cui including configuration file /etc/raddb/policy.d/debug including configuration file /etc/raddb/policy.d/dhcp including configuration file /etc/raddb/policy.d/eap including configuration file /etc/raddb/policy.d/operator-name including configuration file /etc/raddb/policy.d/filter including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/inner-tunnel including configuration file /etc/raddb/sites-enabled/eduroam main { security { user = "radiusd" group = "radiusd" allow_core_dumps = no } } main { name = "freeradius3" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/radius" run_dir = "/var/run/freeradius3" libdir = "/usr/lib" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/freeradius3/freeradius3.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } } home_server tlrs1.eduroam.us { ipaddr = 64.57.22.74 port = 1812 type = "auth+acct" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 60 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 300 coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } } home_server tlrs2.eduroam.us { ipaddr = 64.57.22.78 port = 1812 type = "auth+acct" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 60 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 300 coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm wayne.edu { auth_pool = my_auth_failover Ignoring old-style configuration entry "authhost" in realm "wayne.edu" } realm LOCAL { } realm med.wayne.edu { authhost = rsa.med.wayne.edu:1738 secret = AhnEAF6XgjkS28 } realm EDUROAM { } home_server_pool EDUROAM_POOL { type = fail-over home_server = tlrs1.eduroam.us home_server = tlrs2.eduroam.us } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 141.217.4.0/24 { ipaddr = 141.217.4.0/24 require_message_authenticator = no secret = <<< secret >>> shortname = "wayne-313" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 141.217.152.122 { ipaddr = 141.217.152.122 require_message_authenticator = no secret = <<< secret >>> shortname = "wlan9.infra-w" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 64.57.22.74 { ipaddr = 64.57.22.74 netmask = 32 require_message_authenticator = no secret = <<< secret >>> shortname = "tlrs1.eduroam.us" virtual_server = "eduroam" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } 'netmask' field found in client 64.57.22.74 is deprecated, use CIDR notation instead. Please fix your configuration Support for 'netmask' will be removed in a future release client 64.57.22.78 { ipaddr = 64.57.22.78 netmask = 32 require_message_authenticator = no secret = <<< secret >>> shortname = "tlrs2.eduroam.us" virtual_server = "eduroam" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } 'netmask' field found in client 64.57.22.78 is deprecated, use CIDR notation instead. Please fix your configuration Support for 'netmask' will be removed in a future release radiusd: #### Instantiating modules #### instantiate { } modules { # Loaded module rlm_always # Instantiating module "reject" from file /etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Instantiating module "fail" from file /etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Instantiating module "ok" from file /etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Instantiating module "handled" from file /etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Instantiating module "noop" from file /etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Instantiating module "updated" from file /etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_attr_filter # Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response # Loaded module rlm_cache # Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap cache cache_eap { key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 16384 epoch = 0 add_stats = no } # Loaded module rlm_chap # Instantiating module "chap" from file /etc/raddb/mods-enabled/chap # Loaded module rlm_detail # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail detail { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } # Instantiating module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } # Instantiating module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } # Loaded module rlm_dhcp # Instantiating module "dhcp" from file /etc/raddb/mods-enabled/dhcp # Loaded module rlm_digest # Instantiating module "digest" from file /etc/raddb/mods-enabled/digest # Loaded module rlm_dynamic_clients # Instantiating module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_eap # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap eap { default_eap_type = "peap" timer_expire = 60 ignore_unknown_eap_types = no mod_accounting_username_bug = no max_sessions = 16384 } # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 ca_path = "/etc/raddb/certs" pem_file_type = yes private_key_file = "/etc/raddb/certs/server.pem" certificate_file = "/etc/raddb/certs/server.pem" ca_file = "/etc/raddb/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/raddb/certs/dh" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" ecdh_curve = "prime256v1" cache { enable = yes lifetime = 24 max_entries = 255 } verify { } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = yes } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = yes use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_method = "mschapv2" copy_request_to_tunnel = yes use_tunneled_reply = yes proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Loaded module rlm_exec # Instantiating module "echo" from file /etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Instantiating module "exec" from file /etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_expiration # Instantiating module "expiration" from file /etc/raddb/mods-enabled/expiration # Loaded module rlm_expr # Instantiating module "expr" from file /etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" } # Loaded module rlm_files # Instantiating module "files" from file /etc/raddb/mods-enabled/files files { filename = "/etc/raddb/mods-config/files/authorize" usersfile = "/etc/raddb/mods-config/files/authorize" acctusersfile = "/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy" compat = "cistron" } reading pairlist file /etc/raddb/mods-config/files/authorize [/etc/raddb/mods-config/files/authorize]:87 Cistron compatibility checks for entry bob ... [/etc/raddb/mods-config/files/authorize]:181 Cistron compatibility checks for entry DEFAULT ... [/etc/raddb/mods-config/files/authorize]:188 Cistron compatibility checks for entry DEFAULT ... [/etc/raddb/mods-config/files/authorize]:195 Cistron compatibility checks for entry DEFAULT ... reading pairlist file /etc/raddb/mods-config/files/authorize [/etc/raddb/mods-config/files/authorize]:87 Cistron compatibility checks for entry bob ... [/etc/raddb/mods-config/files/authorize]:181 Cistron compatibility checks for entry DEFAULT ... [/etc/raddb/mods-config/files/authorize]:188 Cistron compatibility checks for entry DEFAULT ... [/etc/raddb/mods-config/files/authorize]:195 Cistron compatibility checks for entry DEFAULT ... reading pairlist file /etc/raddb/mods-config/files/accounting reading pairlist file /etc/raddb/mods-config/files/pre-proxy # Loaded module rlm_linelog # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog linelog { filename = "/var/log/radius/linelog" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{Packet-Type}:-default}" } # Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/var/log/radius/linelog-accounting" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_logintime # Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_mschap # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes } # Instantiating module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_pap # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_passwd # Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Loaded module rlm_preprocess # Instantiating module "preprocess" from file /etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups" hints = "/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /etc/raddb/mods-config/preprocess/hints # Loaded module rlm_radutmp # Instantiating module "radutmp" from file /etc/raddb/mods-enabled/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_realm # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\" ignore_default = no ignore_null = no } # Loaded module rlm_replicate # Instantiating module "replicate" from file /etc/raddb/mods-enabled/replicate # Loaded module rlm_soh # Instantiating module "soh" from file /etc/raddb/mods-enabled/soh soh { dhcp = yes } # Instantiating module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_unix # Instantiating module "unix" from file /etc/raddb/mods-enabled/unix unix { radwtmp = "/var/log/radius/radwtmp" } # Loaded module rlm_unpack # Instantiating module "unpack" from file /etc/raddb/mods-enabled/unpack # Loaded module rlm_utf8 # Instantiating module "utf8" from file /etc/raddb/mods-enabled/utf8 # Loaded module rlm_ldap # Instantiating module "ldap" from file /etc/raddb/mods-enabled/ldap ldap { server = "ldap.wayne.edu" port = 389 password = <<< secret >>> identity = "cn=Script Manager,ou=System Groups,ou=Groups,dc=wayne,dc=edu" user { filter = "(uid=%{%{Stripped-User-Name}:-%{User-Name}})" scope = "sub" base_dn = "dc=wayne,dc=edu" access_positive = yes } group { filter = "(objectClass=posixGroup)" scope = "sub" base_dn = "dc=wayne,dc=edu" name_attribute = "cn" membership_attribute = "memberOf" cacheable_name = no cacheable_dn = no } client { filter = "(objectClass=frClient)" scope = "sub" base_dn = "dc=wayne,dc=edu" attribute { identifier = "radiusClientIdentifier" shortname = "cn" secret = "radiusClientSecret" } } profile { filter = "(&)" } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 1 res_timeout = 20 srv_timelimit = 20 idle = 60 probes = 3 interval = 3 } tls { start_tls = no } } rlm_ldap: Falling back to build time libldap version info. Query for LDAP_OPT_API_INFO returned: -1 rlm_ldap: libldap vendor: OpenLDAP version: 20440 accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } rlm_ldap (ldap): Initialising connection pool pool { start = 5 min = 4 max = 32 spare = 3 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 1 spread = no } rlm_ldap (ldap): Opening additional connection (0) rlm_ldap (ldap): Connecting to ldap.wayne.edu:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (1) rlm_ldap (ldap): Connecting to ldap.wayne.edu:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (2) rlm_ldap (ldap): Connecting to ldap.wayne.edu:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (3) rlm_ldap (ldap): Connecting to ldap.wayne.edu:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (4) rlm_ldap (ldap): Connecting to ldap.wayne.edu:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/raddb/radiusd.conf } # server server default { # from file /etc/raddb/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} } # server inner-tunnel server eduroam { # from file /etc/raddb/sites-enabled/eduroam # Creating Auth-Type = digest # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading post-auth {...} } # server eduroam radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 as server default Listening on acct address * port 1813 as server default Listening on auth address :: port 1812 as server default Listening on acct address :: port 1813 as server default Listening on auth address 127.0.0.1 port 18120 as server inner-tunnel Opening new proxy socket 'proxy address * port 0' Listening on proxy address * port 60291 Ready to process requests Received Access-Request Id 248 from 141.217.152.122:53954 to 141.217.0.164:1812 length 157 User-Name = 'zz9930' NAS-IP-Address = 141.217.152.122 NAS-Port = 18433 Called-Station-Id = '00:90:0b:2c:94:fd:eduroam' Calling-Station-Id = '00-22-5F-40-98-BA' Framed-MTU = 1250 NAS-Port-Type = Wireless-802.11 Framed-Compression = None Connect-Info = 'CONNECT 802.11b/g' Chargeable-User-Identity = 0x00 EAP-Message = 0x0201000b017a7a39393330 Message-Authenticator = 0x4af7ae30469b98ebfd106d14fe0f10da (0) Received Access-Request packet from host 141.217.152.122 port 53954, id=248, length=157 (0) User-Name = 'zz9930' (0) NAS-IP-Address = 141.217.152.122 (0) NAS-Port = 18433 (0) Called-Station-Id = '00:90:0b:2c:94:fd:eduroam' (0) Calling-Station-Id = '00-22-5F-40-98-BA' (0) Framed-MTU = 1250 (0) NAS-Port-Type = Wireless-802.11 (0) Framed-Compression = None (0) Connect-Info = 'CONNECT 802.11b/g' (0) Chargeable-User-Identity = 0x00 (0) EAP-Message = 0x0201000b017a7a39393330 (0) Message-Authenticator = 0x4af7ae30469b98ebfd106d14fe0f10da (0) # Executing section authorize from file /etc/raddb/sites-enabled/default (0) authorize { (0) filter_username filter_username { (0) if (!&User-Name) (0) if (!&User-Name) -> FALSE (0) if (&User-Name =~ / /) (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@.*@/ ) (0) if (&User-Name =~ /@.*@/ ) -> FALSE (0) if (&User-Name =~ /\\.\\./ ) (0) if (&User-Name =~ /\\.\\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\\.(.+)$/)) (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\\.$/) (0) if (&User-Name =~ /\\.$/) -> FALSE (0) if (&User-Name =~ /(a)\\./) (0) if (&User-Name =~ /(a)\\./) -> FALSE (0) } # filter_username filter_username = notfound (0) [preprocess] = ok (0) operator-name.authorize operator-name.authorize { (0) if ("%{client:Operator-Name}") (0) Client does not contain config item "Operator-Name" (0) EXPAND %{client:Operator-Name} (0) --> (0) if ("%{client:Operator-Name}") -> FALSE (0) } # operator-name.authorize operator-name.authorize = ok (0) [chap] = noop (0) [mschap] = noop (0) suffix : Checking for suffix after "@" (0) suffix : No '@' in User-Name = "zz9930", looking up realm NULL (0) suffix : No such realm "NULL" (0) [suffix] = noop (0) eap : Peer sent code Response (2) ID 1 length 11 (0) eap : EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = EAP (0) # Executing group from file /etc/raddb/sites-enabled/default (0) authenticate { (0) eap : Peer sent method Identity (1) (0) eap : Calling eap_peap to process EAP data (0) eap_peap : Flushing SSL sessions (of #0) (0) eap_peap : Initiate (0) eap_peap : Start returned 1 (0) eap : New EAP session, adding 'State' attribute to reply 0xa7933f27a7912648 (0) [eap] = handled (0) } # authenticate = handled (0) Sending Access-Challenge packet to host 141.217.152.122 port 53954, id=248, length=0 (0) EAP-Message = 0x010200061920 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0xa7933f27a79126486172f883c9cea508 Sending Access-Challenge Id 248 from 141.217.0.164:1812 to 141.217.152.122:53954 EAP-Message = 0x010200061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xa7933f27a79126486172f883c9cea508 (0) Finished request Waking up in 0.3 seconds. Received Access-Request Id 249 from 141.217.152.122:53954 to 141.217.0.164:1812 length 273 User-Name = 'zz9930' NAS-IP-Address = 141.217.152.122 NAS-Port = 18433 Called-Station-Id = '00:90:0b:2c:94:fd:eduroam' Calling-Station-Id = '00-22-5F-40-98-BA' Framed-MTU = 1250 NAS-Port-Type = Wireless-802.11 Framed-Compression = None Connect-Info = 'CONNECT 802.11b/g' Chargeable-User-Identity = 0x00 EAP-Message = 0x0202006d198000000063160301005e0100005a0301590a60529d8e36c76692ebfa6a46b2e1efb66cc8299ba112b6c9f410c9384ed3000018c014c0130035002fc00ac00900380032000a00130005000401000019000a0006000400170018000b0002010000170000ff01000100 State = 0xa7933f27a79126486172f883c9cea508 Message-Authenticator = 0xe42d476f007c2144fba80895748be48c (1) Received Access-Request packet from host 141.217.152.122 port 53954, id=249, length=273 (1) User-Name = 'zz9930' (1) NAS-IP-Address = 141.217.152.122 (1) NAS-Port = 18433 (1) Called-Station-Id = '00:90:0b:2c:94:fd:eduroam' (1) Calling-Station-Id = '00-22-5F-40-98-BA' (1) Framed-MTU = 1250 (1) NAS-Port-Type = Wireless-802.11 (1) Framed-Compression = None (1) Connect-Info = 'CONNECT 802.11b/g' (1) Chargeable-User-Identity = 0x00 (1) EAP-Message = 0x0202006d198000000063160301005e0100005a0301590a60529d8e36c76692ebfa6a46b2e1efb66cc8299ba112b6c9f410c9384ed3000018c014c0130035002fc00ac00900380032000a00130005000401000019000a0006000400170018000b0002010000170000ff01000100 (1) State = 0xa7933f27a79126486172f883c9cea508 (1) Message-Authenticator = 0xe42d476f007c2144fba80895748be48c (1) # Executing section authorize from file /etc/raddb/sites-enabled/default (1) authorize { (1) filter_username filter_username { (1) if (!&User-Name) (1) if (!&User-Name) -> FALSE (1) if (&User-Name =~ / /) (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@.*@/ ) (1) if (&User-Name =~ /@.*@/ ) -> FALSE (1) if (&User-Name =~ /\\.\\./ ) (1) if (&User-Name =~ /\\.\\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\\.(.+)$/)) (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\\.$/) (1) if (&User-Name =~ /\\.$/) -> FALSE (1) if (&User-Name =~ /(a)\\./) (1) if (&User-Name =~ /(a)\\./) -> FALSE (1) } # filter_username filter_username = notfound (1) [preprocess] = ok (1) operator-name.authorize operator-name.authorize { (1) if ("%{client:Operator-Name}") (1) Client does not contain config item "Operator-Name" (1) EXPAND %{client:Operator-Name} (1) --> (1) if ("%{client:Operator-Name}") -> FALSE (1) } # operator-name.authorize operator-name.authorize = ok (1) [chap] = noop (1) [mschap] = noop (1) suffix : Checking for suffix after "@" (1) suffix : No '@' in User-Name = "zz9930", looking up realm NULL (1) suffix : No such realm "NULL" (1) [suffix] = noop (1) eap : Peer sent code Response (2) ID 2 length 109 (1) eap : Continuing tunnel setup (1) [eap] = ok (1) } # authorize = ok (1) Found Auth-Type = EAP (1) # Executing group from file /etc/raddb/sites-enabled/default (1) authenticate { (1) eap : Expiring EAP session with state 0xa7933f27a7912648 (1) eap : Finished EAP session with state 0xa7933f27a7912648 (1) eap : Previous EAP request found for state 0xa7933f27a7912648, released from the list (1) eap : Peer sent method PEAP (25) (1) eap : EAP PEAP (25) (1) eap : Calling eap_peap to process EAP data (1) eap_peap : processing EAP-TLS TLS Length 99 (1) eap_peap : Length Included (1) eap_peap : eaptls_verify returned 11 (1) eap_peap : (other): before/accept initialization (1) eap_peap : TLS_accept: before/accept initialization (1) eap_peap : <<< TLS 1.0 Handshake [length 005e], ClientHello (1) eap_peap : TLS_accept: SSLv3 read client hello A (1) eap_peap : >>> TLS 1.0 Handshake [length 0059], ServerHello (1) eap_peap : TLS_accept: SSLv3 write server hello A (1) eap_peap : >>> TLS 1.0 Handshake [length 08d0], Certificate (1) eap_peap : TLS_accept: SSLv3 write certificate A (1) eap_peap : >>> TLS 1.0 Handshake [length 014b], ServerKeyExchange (1) eap_peap : TLS_accept: SSLv3 write key exchange A (1) eap_peap : >>> TLS 1.0 Handshake [length 0004], ServerHelloDone (1) eap_peap : TLS_accept: SSLv3 write server done A (1) eap_peap : TLS_accept: SSLv3 flush data (1) eap_peap : TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode (1) eap_peap : eaptls_process returned 13 (1) eap_peap : FR_TLS_HANDLED (1) eap : New EAP session, adding 'State' attribute to reply 0xa7933f27a6902648 (1) [eap] = handled (1) } # authenticate = handled (1) Sending Access-Challenge packet to host 141.217.152.122 port 53954, id=249, length=0 (1) EAP-Message = 0x010303ec19c000000a8c1603010059020000550301590a604d08c5041bea710c56b17e3d8ca211b86752fd78123b6c653d24685e99201d69cd59382c1a906f18f235954d3f197e12772ac9e6f0d322e9ef69ea577c87c01400000dff01000100000b00040300010216030108d00b0008cc0008c90003de308203da308202c2a003020102020101300d06092a864886f70d01010b0500308193310b3009060355040613024652310f300d060355040813065261646975733112301006035504071309536f6d65776865726531153013060355040a130c4578616d706c6520496e632e3120301e06092a864886f70d010901161161646d696e406578616d706c652e636f6d312630240603550403131d4578616d706c6520436572746966696361746520417574686f72697479301e170d3137303432303132353530325a170d3137303631393132353530325a307c310b3009060355040613024652310f300d0603550408130652616469757331153013060355040a130c4578616d706c6520496e632e312330210603550403131a4578616d706c65205365727665722043657274696669636174653120301e06092a864886f70d010901161161646d696e406578616d706c652e636f6d30820122300d06092a864886f70d01010105000382010f003082010a0282010100ad1a6e0b69866ab9f349b649 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0xa7933f27a69026486172f883c9cea508 Sending Access-Challenge Id 249 from 141.217.0.164:1812 to 141.217.152.122:53954 EAP-Message = 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 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xa7933f27a69026486172f883c9cea508 (1) Finished request Waking up in 0.2 seconds. Received Access-Request Id 250 from 141.217.152.122:53954 to 141.217.0.164:1812 length 170 User-Name = 'zz9930' NAS-IP-Address = 141.217.152.122 NAS-Port = 18433 Called-Station-Id = '00:90:0b:2c:94:fd:eduroam' Calling-Station-Id = '00-22-5F-40-98-BA' Framed-MTU = 1250 NAS-Port-Type = Wireless-802.11 Framed-Compression = None Connect-Info = 'CONNECT 802.11b/g' Chargeable-User-Identity = 0x00 EAP-Message = 0x020300061900 State = 0xa7933f27a69026486172f883c9cea508 Message-Authenticator = 0x74eb735f68854de96428bfbcc4f37892 (2) Received Access-Request packet from host 141.217.152.122 port 53954, id=250, length=170 (2) User-Name = 'zz9930' (2) NAS-IP-Address = 141.217.152.122 (2) NAS-Port = 18433 (2) Called-Station-Id = '00:90:0b:2c:94:fd:eduroam' (2) Calling-Station-Id = '00-22-5F-40-98-BA' (2) Framed-MTU = 1250 (2) NAS-Port-Type = Wireless-802.11 (2) Framed-Compression = None (2) Connect-Info = 'CONNECT 802.11b/g' (2) Chargeable-User-Identity = 0x00 (2) EAP-Message = 0x020300061900 (2) State = 0xa7933f27a69026486172f883c9cea508 (2) Message-Authenticator = 0x74eb735f68854de96428bfbcc4f37892 (2) # Executing section authorize from file /etc/raddb/sites-enabled/default (2) authorize { (2) filter_username filter_username { (2) if (!&User-Name) (2) if (!&User-Name) -> FALSE (2) if (&User-Name =~ / /) (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@.*@/ ) (2) if (&User-Name =~ /@.*@/ ) -> FALSE (2) if (&User-Name =~ /\\.\\./ ) (2) if (&User-Name =~ /\\.\\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\\.(.+)$/)) (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\\.$/) (2) if (&User-Name =~ /\\.$/) -> FALSE (2) if (&User-Name =~ /(a)\\./) (2) if (&User-Name =~ /(a)\\./) -> FALSE (2) } # filter_username filter_username = notfound (2) [preprocess] = ok (2) operator-name.authorize operator-name.authorize { (2) if ("%{client:Operator-Name}") (2) Client does not contain config item "Operator-Name" (2) EXPAND %{client:Operator-Name} (2) --> (2) if ("%{client:Operator-Name}") -> FALSE (2) } # operator-name.authorize operator-name.authorize = ok (2) [chap] = noop (2) [mschap] = noop (2) suffix : Checking for suffix after "@" (2) suffix : No '@' in User-Name = "zz9930", looking up realm NULL (2) suffix : No such realm "NULL" (2) [suffix] = noop (2) eap : Peer sent code Response (2) ID 3 length 6 (2) eap : Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = EAP (2) # Executing group from file /etc/raddb/sites-enabled/default (2) authenticate { (2) eap : Expiring EAP session with state 0xa7933f27a6902648 (2) eap : Finished EAP session with state 0xa7933f27a6902648 (2) eap : Previous EAP request found for state 0xa7933f27a6902648, released from the list (2) eap : Peer sent method PEAP (25) (2) eap : EAP PEAP (25) (2) eap : Calling eap_peap to process EAP data (2) eap_peap : processing EAP-TLS (2) eap_peap : Received TLS ACK (2) eap_peap : Received TLS ACK (2) eap_peap : ACK handshake fragment handler (2) eap_peap : eaptls_verify returned 1 (2) eap_peap : eaptls_process returned 13 (2) eap_peap : FR_TLS_HANDLED (2) eap : New EAP session, adding 'State' attribute to reply 0xa7933f27a5972648 (2) [eap] = handled (2) } # authenticate = handled (2) Sending Access-Challenge packet to host 141.217.152.122 port 53954, id=250, length=0 (2) EAP-Message = 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 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0xa7933f27a59726486172f883c9cea508 Sending Access-Challenge Id 250 from 141.217.0.164:1812 to 141.217.152.122:53954 EAP-Message = 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 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xa7933f27a59726486172f883c9cea508 (2) Finished request Waking up in 0.2 seconds. Received Access-Request Id 251 from 141.217.152.122:53954 to 141.217.0.164:1812 length 170 User-Name = 'zz9930' NAS-IP-Address = 141.217.152.122 NAS-Port = 18433 Called-Station-Id = '00:90:0b:2c:94:fd:eduroam' Calling-Station-Id = '00-22-5F-40-98-BA' Framed-MTU = 1250 NAS-Port-Type = Wireless-802.11 Framed-Compression = None Connect-Info = 'CONNECT 802.11b/g' Chargeable-User-Identity = 0x00 EAP-Message = 0x020400061900 State = 0xa7933f27a59726486172f883c9cea508 Message-Authenticator = 0xafbca4b22ce24d0364825cfb90817336 (3) Received Access-Request packet from host 141.217.152.122 port 53954, id=251, length=170 (3) User-Name = 'zz9930' (3) NAS-IP-Address = 141.217.152.122 (3) NAS-Port = 18433 (3) Called-Station-Id = '00:90:0b:2c:94:fd:eduroam' (3) Calling-Station-Id = '00-22-5F-40-98-BA' (3) Framed-MTU = 1250 (3) NAS-Port-Type = Wireless-802.11 (3) Framed-Compression = None (3) Connect-Info = 'CONNECT 802.11b/g' (3) Chargeable-User-Identity = 0x00 (3) EAP-Message = 0x020400061900 (3) State = 0xa7933f27a59726486172f883c9cea508 (3) Message-Authenticator = 0xafbca4b22ce24d0364825cfb90817336 (3) # Executing section authorize from file /etc/raddb/sites-enabled/default (3) authorize { (3) filter_username filter_username { (3) if (!&User-Name) (3) if (!&User-Name) -> FALSE (3) if (&User-Name =~ / /) (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@.*@/ ) (3) if (&User-Name =~ /@.*@/ ) -> FALSE (3) if (&User-Name =~ /\\.\\./ ) (3) if (&User-Name =~ /\\.\\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\\.(.+)$/)) (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\\.$/) (3) if (&User-Name =~ /\\.$/) -> FALSE (3) if (&User-Name =~ /(a)\\./) (3) if (&User-Name =~ /(a)\\./) -> FALSE (3) } # filter_username filter_username = notfound (3) [preprocess] = ok (3) operator-name.authorize operator-name.authorize { (3) if ("%{client:Operator-Name}") (3) Client does not contain config item "Operator-Name" (3) EXPAND %{client:Operator-Name} (3) --> (3) if ("%{client:Operator-Name}") -> FALSE (3) } # operator-name.authorize operator-name.authorize = ok (3) [chap] = noop (3) [mschap] = noop (3) suffix : Checking for suffix after "@" (3) suffix : No '@' in User-Name = "zz9930", looking up realm NULL (3) suffix : No such realm "NULL" (3) [suffix] = noop (3) eap : Peer sent code Response (2) ID 4 length 6 (3) eap : Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = EAP (3) # Executing group from file /etc/raddb/sites-enabled/default (3) authenticate { (3) eap : Expiring EAP session with state 0xa7933f27a5972648 (3) eap : Finished EAP session with state 0xa7933f27a5972648 (3) eap : Previous EAP request found for state 0xa7933f27a5972648, released from the list (3) eap : Peer sent method PEAP (25) (3) eap : EAP PEAP (25) (3) eap : Calling eap_peap to process EAP data (3) eap_peap : processing EAP-TLS (3) eap_peap : Received TLS ACK (3) eap_peap : Received TLS ACK (3) eap_peap : ACK handshake fragment handler (3) eap_peap : eaptls_verify returned 1 (3) eap_peap : eaptls_process returned 13 (3) eap_peap : FR_TLS_HANDLED (3) eap : New EAP session, adding 'State' attribute to reply 0xa7933f27a4962648 (3) [eap] = handled (3) } # authenticate = handled (3) Sending Access-Challenge packet to host 141.217.152.122 port 53954, id=251, length=0 (3) EAP-Message = 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 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0xa7933f27a49626486172f883c9cea508 Sending Access-Challenge Id 251 from 141.217.0.164:1812 to 141.217.152.122:53954 EAP-Message = 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 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xa7933f27a49626486172f883c9cea508 (3) Finished request Waking up in 0.2 seconds. Received Access-Request Id 252 from 141.217.152.122:53954 to 141.217.0.164:1812 length 308 User-Name = 'zz9930' NAS-IP-Address = 141.217.152.122 NAS-Port = 18433 Called-Station-Id = '00:90:0b:2c:94:fd:eduroam' Calling-Station-Id = '00-22-5F-40-98-BA' Framed-MTU = 1250 NAS-Port-Type = Wireless-802.11 Framed-Compression = None Connect-Info = 'CONNECT 802.11b/g' Chargeable-User-Identity = 0x00 EAP-Message = 0x02050090198000000086160301004610000042410499eea29feacdfdd0ca9bd381141ed49629fbde40954f1e75cc17fdc9d5ffd7c6d431f2c743feb20057c07a5821f3b4abe4cba156a387a38397d74b1c1a0d502b14030100010116030100301221a05db58de5e73e5385b2a253efc91da869175fe9f2aa2d1b2e3237e3c712d2df1077d30534f2351e8034b0aa8f2b State = 0xa7933f27a49626486172f883c9cea508 Message-Authenticator = 0xbb8deb078409de6add57bd6b0074acc3 (4) Received Access-Request packet from host 141.217.152.122 port 53954, id=252, length=308 (4) User-Name = 'zz9930' (4) NAS-IP-Address = 141.217.152.122 (4) NAS-Port = 18433 (4) Called-Station-Id = '00:90:0b:2c:94:fd:eduroam' (4) Calling-Station-Id = '00-22-5F-40-98-BA' (4) Framed-MTU = 1250 (4) NAS-Port-Type = Wireless-802.11 (4) Framed-Compression = None (4) Connect-Info = 'CONNECT 802.11b/g' (4) Chargeable-User-Identity = 0x00 (4) EAP-Message = 0x02050090198000000086160301004610000042410499eea29feacdfdd0ca9bd381141ed49629fbde40954f1e75cc17fdc9d5ffd7c6d431f2c743feb20057c07a5821f3b4abe4cba156a387a38397d74b1c1a0d502b14030100010116030100301221a05db58de5e73e5385b2a253efc91da869175fe9f2aa2d1b2e3237e3c712d2df1077d30534f2351e8034b0aa8f2b (4) State = 0xa7933f27a49626486172f883c9cea508 (4) Message-Authenticator = 0xbb8deb078409de6add57bd6b0074acc3 (4) # Executing section authorize from file /etc/raddb/sites-enabled/default (4) authorize { (4) filter_username filter_username { (4) if (!&User-Name) (4) if (!&User-Name) -> FALSE (4) if (&User-Name =~ / /) (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@.*@/ ) (4) if (&User-Name =~ /@.*@/ ) -> FALSE (4) if (&User-Name =~ /\\.\\./ ) (4) if (&User-Name =~ /\\.\\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\\.(.+)$/)) (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\\.$/) (4) if (&User-Name =~ /\\.$/) -> FALSE (4) if (&User-Name =~ /(a)\\./) (4) if (&User-Name =~ /(a)\\./) -> FALSE (4) } # filter_username filter_username = notfound (4) [preprocess] = ok (4) operator-name.authorize operator-name.authorize { (4) if ("%{client:Operator-Name}") (4) Client does not contain config item "Operator-Name" (4) EXPAND %{client:Operator-Name} (4) --> (4) if ("%{client:Operator-Name}") -> FALSE (4) } # operator-name.authorize operator-name.authorize = ok (4) [chap] = noop (4) [mschap] = noop (4) suffix : Checking for suffix after "@" (4) suffix : No '@' in User-Name = "zz9930", looking up realm NULL (4) suffix : No such realm "NULL" (4) [suffix] = noop (4) eap : Peer sent code Response (2) ID 5 length 144 (4) eap : Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = EAP (4) # Executing group from file /etc/raddb/sites-enabled/default (4) authenticate { (4) eap : Expiring EAP session with state 0xa7933f27a4962648 (4) eap : Finished EAP session with state 0xa7933f27a4962648 (4) eap : Previous EAP request found for state 0xa7933f27a4962648, released from the list (4) eap : Peer sent method PEAP (25) (4) eap : EAP PEAP (25) (4) eap : Calling eap_peap to process EAP data (4) eap_peap : processing EAP-TLS TLS Length 134 (4) eap_peap : Length Included (4) eap_peap : eaptls_verify returned 11 (4) eap_peap : <<< TLS 1.0 Handshake [length 0046], ClientKeyExchange (4) eap_peap : TLS_accept: SSLv3 read client key exchange A (4) eap_peap : <<< TLS 1.0 ChangeCipherSpec [length 0001] (4) eap_peap : <<< TLS 1.0 Handshake [length 0010], Finished (4) eap_peap : TLS_accept: SSLv3 read finished A (4) eap_peap : >>> TLS 1.0 ChangeCipherSpec [length 0001] (4) eap_peap : TLS_accept: SSLv3 write change cipher spec A (4) eap_peap : >>> TLS 1.0 Handshake [length 0010], Finished (4) eap_peap : TLS_accept: SSLv3 write finished A (4) eap_peap : TLS_accept: SSLv3 flush data SSL: adding session 1d69cd59382c1a906f18f235954d3f197e12772ac9e6f0d322e9ef69ea577c87 to cache (4) eap_peap : (other): SSL negotiation finished successfully SSL Connection Established (4) eap_peap : eaptls_process returned 13 (4) eap_peap : FR_TLS_HANDLED (4) eap : New EAP session, adding 'State' attribute to reply 0xa7933f27a3952648 (4) [eap] = handled (4) } # authenticate = handled (4) Sending Access-Challenge packet to host 141.217.152.122 port 53954, id=252, length=0 (4) EAP-Message = 0x010600411900140301000101160301003097a7683d2e358052cec282d0c8d85b7d7f05c147c9e65214bca51c7057343c09e5c7e9b0d1abceb8e5cea1ed1718015a (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0xa7933f27a39526486172f883c9cea508 Sending Access-Challenge Id 252 from 141.217.0.164:1812 to 141.217.152.122:53954 EAP-Message = 0x010600411900140301000101160301003097a7683d2e358052cec282d0c8d85b7d7f05c147c9e65214bca51c7057343c09e5c7e9b0d1abceb8e5cea1ed1718015a Message-Authenticator = 0x00000000000000000000000000000000 State = 0xa7933f27a39526486172f883c9cea508 (4) Finished request Waking up in 0.1 seconds. Received Access-Request Id 253 from 141.217.152.122:53954 to 141.217.0.164:1812 length 170 User-Name = 'zz9930' NAS-IP-Address = 141.217.152.122 NAS-Port = 18433 Called-Station-Id = '00:90:0b:2c:94:fd:eduroam' Calling-Station-Id = '00-22-5F-40-98-BA' Framed-MTU = 1250 NAS-Port-Type = Wireless-802.11 Framed-Compression = None Connect-Info = 'CONNECT 802.11b/g' Chargeable-User-Identity = 0x00 EAP-Message = 0x020600061900 State = 0xa7933f27a39526486172f883c9cea508 Message-Authenticator = 0x1194a95cbc44bbe03dc430beccdea9e4 (5) Received Access-Request packet from host 141.217.152.122 port 53954, id=253, length=170 (5) User-Name = 'zz9930' (5) NAS-IP-Address = 141.217.152.122 (5) NAS-Port = 18433 (5) Called-Station-Id = '00:90:0b:2c:94:fd:eduroam' (5) Calling-Station-Id = '00-22-5F-40-98-BA' (5) Framed-MTU = 1250 (5) NAS-Port-Type = Wireless-802.11 (5) Framed-Compression = None (5) Connect-Info = 'CONNECT 802.11b/g' (5) Chargeable-User-Identity = 0x00 (5) EAP-Message = 0x020600061900 (5) State = 0xa7933f27a39526486172f883c9cea508 (5) Message-Authenticator = 0x1194a95cbc44bbe03dc430beccdea9e4 (5) # Executing section authorize from file /etc/raddb/sites-enabled/default (5) authorize { (5) filter_username filter_username { (5) if (!&User-Name) (5) if (!&User-Name) -> FALSE (5) if (&User-Name =~ / /) (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@.*@/ ) (5) if (&User-Name =~ /@.*@/ ) -> FALSE (5) if (&User-Name =~ /\\.\\./ ) (5) if (&User-Name =~ /\\.\\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\\.(.+)$/)) (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\\.$/) (5) if (&User-Name =~ /\\.$/) -> FALSE (5) if (&User-Name =~ /(a)\\./) (5) if (&User-Name =~ /(a)\\./) -> FALSE (5) } # filter_username filter_username = notfound (5) [preprocess] = ok (5) operator-name.authorize operator-name.authorize { (5) if ("%{client:Operator-Name}") (5) Client does not contain config item "Operator-Name" (5) EXPAND %{client:Operator-Name} (5) --> (5) if ("%{client:Operator-Name}") -> FALSE (5) } # operator-name.authorize operator-name.authorize = ok (5) [chap] = noop (5) [mschap] = noop (5) suffix : Checking for suffix after "@" (5) suffix : No '@' in User-Name = "zz9930", looking up realm NULL (5) suffix : No such realm "NULL" (5) [suffix] = noop (5) eap : Peer sent code Response (2) ID 6 length 6 (5) eap : Continuing tunnel setup (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = EAP (5) # Executing group from file /etc/raddb/sites-enabled/default (5) authenticate { (5) eap : Expiring EAP session with state 0xa7933f27a3952648 (5) eap : Finished EAP session with state 0xa7933f27a3952648 (5) eap : Previous EAP request found for state 0xa7933f27a3952648, released from the list (5) eap : Peer sent method PEAP (25) (5) eap : EAP PEAP (25) (5) eap : Calling eap_peap to process EAP data (5) eap_peap : processing EAP-TLS (5) eap_peap : Received TLS ACK (5) eap_peap : Received TLS ACK (5) eap_peap : ACK handshake is finished (5) eap_peap : eaptls_verify returned 3 (5) eap_peap : eaptls_process returned 3 (5) eap_peap : FR_TLS_SUCCESS (5) eap_peap : Session established. Decoding tunneled attributes (5) eap_peap : Peap state TUNNEL ESTABLISHED (5) eap : New EAP session, adding 'State' attribute to reply 0xa7933f27a2942648 (5) [eap] = handled (5) } # authenticate = handled (5) Sending Access-Challenge packet to host 141.217.152.122 port 53954, id=253, length=0 (5) EAP-Message = 0x0107002b1900170301002095a9aec63043a97bed432db7e3fe794bf88f0f6ca530337c1373d29e10c1b954 (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0xa7933f27a29426486172f883c9cea508 Sending Access-Challenge Id 253 from 141.217.0.164:1812 to 141.217.152.122:53954 EAP-Message = 0x0107002b1900170301002095a9aec63043a97bed432db7e3fe794bf88f0f6ca530337c1373d29e10c1b954 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xa7933f27a29426486172f883c9cea508 (5) Finished request Waking up in 0.1 seconds. Received Access-Request Id 254 from 141.217.152.122:53954 to 141.217.0.164:1812 length 207 User-Name = 'zz9930' NAS-IP-Address = 141.217.152.122 NAS-Port = 18433 Called-Station-Id = '00:90:0b:2c:94:fd:eduroam' Calling-Station-Id = '00-22-5F-40-98-BA' Framed-MTU = 1250 NAS-Port-Type = Wireless-802.11 Framed-Compression = None Connect-Info = 'CONNECT 802.11b/g' Chargeable-User-Identity = 0x00 EAP-Message = 0x0207002b190017030100206cb5837bb9a948ee44aa1c6de88133ac876f640907da876c2ec9d62d3d0de711 State = 0xa7933f27a29426486172f883c9cea508 Message-Authenticator = 0xc471b6d269ce0c46db09346dafead567 (6) Received Access-Request packet from host 141.217.152.122 port 53954, id=254, length=207 (6) User-Name = 'zz9930' (6) NAS-IP-Address = 141.217.152.122 (6) NAS-Port = 18433 (6) Called-Station-Id = '00:90:0b:2c:94:fd:eduroam' (6) Calling-Station-Id = '00-22-5F-40-98-BA' (6) Framed-MTU = 1250 (6) NAS-Port-Type = Wireless-802.11 (6) Framed-Compression = None (6) Connect-Info = 'CONNECT 802.11b/g' (6) Chargeable-User-Identity = 0x00 (6) EAP-Message = 0x0207002b190017030100206cb5837bb9a948ee44aa1c6de88133ac876f640907da876c2ec9d62d3d0de711 (6) State = 0xa7933f27a29426486172f883c9cea508 (6) Message-Authenticator = 0xc471b6d269ce0c46db09346dafead567 (6) # Executing section authorize from file /etc/raddb/sites-enabled/default (6) authorize { (6) filter_username filter_username { (6) if (!&User-Name) (6) if (!&User-Name) -> FALSE (6) if (&User-Name =~ / /) (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@.*@/ ) (6) if (&User-Name =~ /@.*@/ ) -> FALSE (6) if (&User-Name =~ /\\.\\./ ) (6) if (&User-Name =~ /\\.\\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\\.(.+)$/)) (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\\.$/) (6) if (&User-Name =~ /\\.$/) -> FALSE (6) if (&User-Name =~ /(a)\\./) (6) if (&User-Name =~ /(a)\\./) -> FALSE (6) } # filter_username filter_username = notfound (6) [preprocess] = ok (6) operator-name.authorize operator-name.authorize { (6) if ("%{client:Operator-Name}") (6) Client does not contain config item "Operator-Name" (6) EXPAND %{client:Operator-Name} (6) --> (6) if ("%{client:Operator-Name}") -> FALSE (6) } # operator-name.authorize operator-name.authorize = ok (6) [chap] = noop (6) [mschap] = noop (6) suffix : Checking for suffix after "@" (6) suffix : No '@' in User-Name = "zz9930", looking up realm NULL (6) suffix : No such realm "NULL" (6) [suffix] = noop (6) eap : Peer sent code Response (2) ID 7 length 43 (6) eap : Continuing tunnel setup (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = EAP (6) # Executing group from file /etc/raddb/sites-enabled/default (6) authenticate { (6) eap : Expiring EAP session with state 0xa7933f27a2942648 (6) eap : Finished EAP session with state 0xa7933f27a2942648 (6) eap : Previous EAP request found for state 0xa7933f27a2942648, released from the list (6) eap : Peer sent method PEAP (25) (6) eap : EAP PEAP (25) (6) eap : Calling eap_peap to process EAP data (6) eap_peap : processing EAP-TLS (6) eap_peap : eaptls_verify returned 7 (6) eap_peap : Done initial handshake (6) eap_peap : eaptls_process returned 7 (6) eap_peap : FR_TLS_OK (6) eap_peap : Session established. Decoding tunneled attributes (6) eap_peap : Peap state WAITING FOR INNER IDENTITY (6) eap_peap : Identity - zz9930 (6) eap_peap : Got inner identity 'zz9930' (6) eap_peap : Setting default EAP type for tunneled EAP session (6) eap_peap : Got tunneled request EAP-Message = 0x0207000b017a7a39393330 server default { (6) eap_peap : Setting User-Name to zz9930 Sending tunneled request EAP-Message = 0x0207000b017a7a39393330 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = 'zz9930' NAS-IP-Address = 141.217.152.122 NAS-Port = 18433 Called-Station-Id = '00:90:0b:2c:94:fd:eduroam' Calling-Station-Id = '00-22-5F-40-98-BA' Framed-MTU = 1250 NAS-Port-Type = Wireless-802.11 Framed-Compression = None Connect-Info = 'CONNECT 802.11b/g' Chargeable-User-Identity = 0x00 Event-Timestamp = 'May 3 2017 18:57:17 EDT' server inner-tunnel { (6) server inner-tunnel { (6) Request: EAP-Message = 0x0207000b017a7a39393330 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = 'zz9930' NAS-IP-Address = 141.217.152.122 NAS-Port = 18433 Called-Station-Id = '00:90:0b:2c:94:fd:eduroam' Calling-Station-Id = '00-22-5F-40-98-BA' Framed-MTU = 1250 NAS-Port-Type = Wireless-802.11 Framed-Compression = None Connect-Info = 'CONNECT 802.11b/g' Chargeable-User-Identity = 0x00 Event-Timestamp = 'May 3 2017 18:57:17 EDT' (6) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel (6) authorize { (6) suffix : Checking for suffix after "@" (6) suffix : No '@' in User-Name = "zz9930", looking up realm NULL (6) suffix : No such realm "NULL" (6) [suffix] = noop (6) update control { (6) Proxy-To-Realm := 'LOCAL' (6) } # update control = noop (6) eap : Peer sent code Response (2) ID 7 length 11 (6) eap : EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = EAP (6) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (6) authenticate { (6) eap : Peer sent method Identity (1) (6) eap : Calling eap_mschapv2 to process EAP data (6) eap_mschapv2 : Issuing Challenge (6) eap : New EAP session, adding 'State' attribute to reply 0x1dbb3f611db32526 (6) [eap] = handled (6) } # authenticate = handled (6) Reply: EAP-Message = 0x010800201a0108001b1017be22841cd532ad5de1b2a095c735587a7a39393330 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x1dbb3f611db325265f8bb63a7b5a1416 (6) } # server inner-tunnel } # server inner-tunnel (6) eap_peap : Got tunneled reply code 11 EAP-Message = 0x010800201a0108001b1017be22841cd532ad5de1b2a095c735587a7a39393330 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x1dbb3f611db325265f8bb63a7b5a1416 (6) eap_peap : Got tunneled reply RADIUS code 11 EAP-Message = 0x010800201a0108001b1017be22841cd532ad5de1b2a095c735587a7a39393330 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x1dbb3f611db325265f8bb63a7b5a1416 (6) eap_peap : Got tunneled Access-Challenge (6) eap : New EAP session, adding 'State' attribute to reply 0xa7933f27a19b2648 (6) [eap] = handled (6) } # authenticate = handled (6) Sending Access-Challenge packet to host 141.217.152.122 port 53954, id=254, length=0 (6) EAP-Message = 0x0108004b190017030100408fcefbce566104a3980136c63ab6695b06e56354c8af9893b15cf2b0bbe8edb3c86ad7c200714f711192fb755756a5294edcf70696f7d67d43994e54ca079c65 (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0xa7933f27a19b26486172f883c9cea508 Sending Access-Challenge Id 254 from 141.217.0.164:1812 to 141.217.152.122:53954 EAP-Message = 0x0108004b190017030100408fcefbce566104a3980136c63ab6695b06e56354c8af9893b15cf2b0bbe8edb3c86ad7c200714f711192fb755756a5294edcf70696f7d67d43994e54ca079c65 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xa7933f27a19b26486172f883c9cea508 (6) Finished request Waking up in 0.1 seconds. Received Access-Request Id 255 from 141.217.152.122:53954 to 141.217.0.164:1812 length 271 User-Name = 'zz9930' NAS-IP-Address = 141.217.152.122 NAS-Port = 18433 Called-Station-Id = '00:90:0b:2c:94:fd:eduroam' Calling-Station-Id = '00-22-5F-40-98-BA' Framed-MTU = 1250 NAS-Port-Type = Wireless-802.11 Framed-Compression = None Connect-Info = 'CONNECT 802.11b/g' Chargeable-User-Identity = 0x00 EAP-Message = 0x0208006b1900170301006029f3037acf1c46040c117e12cc7c96aefb99fdf2c15aa4a9c17985a370a00f801e217f5d03caf8871b86c4a8dcedd881c769974a48c27e7905c8c64bcc04aa00a368734d143fe67e81d4e0bff407c9cb1bff44d29672798852d840f442634561 State = 0xa7933f27a19b26486172f883c9cea508 Message-Authenticator = 0x5191a7ea109a39422d39790b4c40cd96 (7) Received Access-Request packet from host 141.217.152.122 port 53954, id=255, length=271 (7) User-Name = 'zz9930' (7) NAS-IP-Address = 141.217.152.122 (7) NAS-Port = 18433 (7) Called-Station-Id = '00:90:0b:2c:94:fd:eduroam' (7) Calling-Station-Id = '00-22-5F-40-98-BA' (7) Framed-MTU = 1250 (7) NAS-Port-Type = Wireless-802.11 (7) Framed-Compression = None (7) Connect-Info = 'CONNECT 802.11b/g' (7) Chargeable-User-Identity = 0x00 (7) EAP-Message = 0x0208006b1900170301006029f3037acf1c46040c117e12cc7c96aefb99fdf2c15aa4a9c17985a370a00f801e217f5d03caf8871b86c4a8dcedd881c769974a48c27e7905c8c64bcc04aa00a368734d143fe67e81d4e0bff407c9cb1bff44d29672798852d840f442634561 (7) State = 0xa7933f27a19b26486172f883c9cea508 (7) Message-Authenticator = 0x5191a7ea109a39422d39790b4c40cd96 (7) # Executing section authorize from file /etc/raddb/sites-enabled/default (7) authorize { (7) filter_username filter_username { (7) if (!&User-Name) (7) if (!&User-Name) -> FALSE (7) if (&User-Name =~ / /) (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@.*@/ ) (7) if (&User-Name =~ /@.*@/ ) -> FALSE (7) if (&User-Name =~ /\\.\\./ ) (7) if (&User-Name =~ /\\.\\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\\.(.+)$/)) (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\\.$/) (7) if (&User-Name =~ /\\.$/) -> FALSE (7) if (&User-Name =~ /(a)\\./) (7) if (&User-Name =~ /(a)\\./) -> FALSE (7) } # filter_username filter_username = notfound (7) [preprocess] = ok (7) operator-name.authorize operator-name.authorize { (7) if ("%{client:Operator-Name}") (7) Client does not contain config item "Operator-Name" (7) EXPAND %{client:Operator-Name} (7) --> (7) if ("%{client:Operator-Name}") -> FALSE (7) } # operator-name.authorize operator-name.authorize = ok (7) [chap] = noop (7) [mschap] = noop (7) suffix : Checking for suffix after "@" (7) suffix : No '@' in User-Name = "zz9930", looking up realm NULL (7) suffix : No such realm "NULL" (7) [suffix] = noop (7) eap : Peer sent code Response (2) ID 8 length 107 (7) eap : Continuing tunnel setup (7) [eap] = ok (7) } # authorize = ok (7) Found Auth-Type = EAP (7) # Executing group from file /etc/raddb/sites-enabled/default (7) authenticate { (7) eap : Expiring EAP session with state 0x1dbb3f611db32526 (7) eap : Finished EAP session with state 0xa7933f27a19b2648 (7) eap : Previous EAP request found for state 0xa7933f27a19b2648, released from the list (7) eap : Peer sent method PEAP (25) (7) eap : EAP PEAP (25) (7) eap : Calling eap_peap to process EAP data (7) eap_peap : processing EAP-TLS (7) eap_peap : eaptls_verify returned 7 (7) eap_peap : Done initial handshake (7) eap_peap : eaptls_process returned 7 (7) eap_peap : FR_TLS_OK (7) eap_peap : Session established. Decoding tunneled attributes (7) eap_peap : Peap state phase2 (7) eap_peap : EAP type MSCHAPv2 (26) (7) eap_peap : Got tunneled request EAP-Message = 0x020800411a0208003c314fa8d1b469a2f31e0b92ca0a454711c90000000000000000ef748549b6f1f9131e7db72fa686acd4e834400cb184c7ed007a7a39393330 server default { (7) eap_peap : Setting User-Name to zz9930 Sending tunneled request EAP-Message = 0x020800411a0208003c314fa8d1b469a2f31e0b92ca0a454711c90000000000000000ef748549b6f1f9131e7db72fa686acd4e834400cb184c7ed007a7a39393330 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = 'zz9930' State = 0x1dbb3f611db325265f8bb63a7b5a1416 NAS-IP-Address = 141.217.152.122 NAS-Port = 18433 Called-Station-Id = '00:90:0b:2c:94:fd:eduroam' Calling-Station-Id = '00-22-5F-40-98-BA' Framed-MTU = 1250 NAS-Port-Type = Wireless-802.11 Framed-Compression = None Connect-Info = 'CONNECT 802.11b/g' Chargeable-User-Identity = 0x00 Event-Timestamp = 'May 3 2017 18:57:17 EDT' server inner-tunnel { (7) server inner-tunnel { (7) Request: EAP-Message = 0x020800411a0208003c314fa8d1b469a2f31e0b92ca0a454711c90000000000000000ef748549b6f1f9131e7db72fa686acd4e834400cb184c7ed007a7a39393330 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = 'zz9930' State = 0x1dbb3f611db325265f8bb63a7b5a1416 NAS-IP-Address = 141.217.152.122 NAS-Port = 18433 Called-Station-Id = '00:90:0b:2c:94:fd:eduroam' Calling-Station-Id = '00-22-5F-40-98-BA' Framed-MTU = 1250 NAS-Port-Type = Wireless-802.11 Framed-Compression = None Connect-Info = 'CONNECT 802.11b/g' Chargeable-User-Identity = 0x00 Event-Timestamp = 'May 3 2017 18:57:17 EDT' (7) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel (7) authorize { (7) suffix : Checking for suffix after "@" (7) suffix : No '@' in User-Name = "zz9930", looking up realm NULL (7) suffix : No such realm "NULL" (7) [suffix] = noop (7) update control { (7) Proxy-To-Realm := 'LOCAL' (7) } # update control = noop (7) eap : Peer sent code Response (2) ID 8 length 65 (7) eap : No EAP Start, assuming it's an on-going EAP conversation (7) [eap] = updated (7) [expiration] = noop (7) [logintime] = noop (7) [pap] = noop (7) } # authorize = updated (7) Found Auth-Type = EAP (7) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (7) authenticate { (7) eap : Expiring EAP session with state 0x1dbb3f611db32526 (7) eap : Finished EAP session with state 0x1dbb3f611db32526 (7) eap : Previous EAP request found for state 0x1dbb3f611db32526, released from the list (7) eap : Peer sent method MSCHAPv2 (26) (7) eap : EAP MSCHAPv2 (26) (7) eap : Calling eap_mschapv2 to process EAP data (7) eap_mschapv2 : # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (7) eap : Freeing handler (7) [eap] = reject (7) } # authenticate = reject (7) Failed to authenticate the user (7) Using Post-Auth-Type Reject (7) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (7) Post-Auth-Type REJECT { (7) attr_filter.access_reject : EXPAND %{User-Name} (7) attr_filter.access_reject : --> zz9930 (7) attr_filter.access_reject : Matched entry DEFAULT at line 11 (7) [attr_filter.access_reject] = updated (7) } # Post-Auth-Type REJECT = updated (7) Reply: EAP-Message = 0x04080004 Message-Authenticator = 0x00000000000000000000000000000000 (7) } # server inner-tunnel } # server inner-tunnel (7) eap_peap : Got tunneled reply code 3 EAP-Message = 0x04080004 Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_peap : Got tunneled reply RADIUS code 3 EAP-Message = 0x04080004 Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_peap : Tunneled authentication was rejected (7) eap_peap : FAILURE (7) eap : New EAP session, adding 'State' attribute to reply 0xa7933f27a09a2648 (7) [eap] = handled (7) } # authenticate = handled (7) Sending Access-Challenge packet to host 141.217.152.122 port 53954, id=255, length=0 (7) EAP-Message = 0x0109002b190017030100209a97f58e0dfbf3e65962a6a2440c35255bc1a5e9b6e4f950d4eb8546a47c420c (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0xa7933f27a09a26486172f883c9cea508 Sending Access-Challenge Id 255 from 141.217.0.164:1812 to 141.217.152.122:53954 EAP-Message = 0x0109002b190017030100209a97f58e0dfbf3e65962a6a2440c35255bc1a5e9b6e4f950d4eb8546a47c420c Message-Authenticator = 0x00000000000000000000000000000000 State = 0xa7933f27a09a26486172f883c9cea508 (7) Finished request Received Access-Request Id 0 from 141.217.152.122:53954 to 141.217.0.164:1812 length 207 User-Name = 'zz9930' NAS-IP-Address = 141.217.152.122 NAS-Port = 18433 Called-Station-Id = '00:90:0b:2c:94:fd:eduroam' Calling-Station-Id = '00-22-5F-40-98-BA' Framed-MTU = 1250 NAS-Port-Type = Wireless-802.11 Framed-Compression = None Connect-Info = 'CONNECT 802.11b/g' Chargeable-User-Identity = 0x00 EAP-Message = 0x0209002b19001703010020d6a41b5d552fc8ce1d5d7a417bbad3e02e1cc86f3762effb71e106e6b413029f State = 0xa7933f27a09a26486172f883c9cea508 Message-Authenticator = 0x6c02a9d61f9d534f23789253c7f1d531 (8) Received Access-Request packet from host 141.217.152.122 port 53954, id=0, length=207 (8) User-Name = 'zz9930' (8) NAS-IP-Address = 141.217.152.122 (8) NAS-Port = 18433 (8) Called-Station-Id = '00:90:0b:2c:94:fd:eduroam' (8) Calling-Station-Id = '00-22-5F-40-98-BA' (8) Framed-MTU = 1250 (8) NAS-Port-Type = Wireless-802.11 (8) Framed-Compression = None (8) Connect-Info = 'CONNECT 802.11b/g' (8) Chargeable-User-Identity = 0x00 (8) EAP-Message = 0x0209002b19001703010020d6a41b5d552fc8ce1d5d7a417bbad3e02e1cc86f3762effb71e106e6b413029f (8) State = 0xa7933f27a09a26486172f883c9cea508 (8) Message-Authenticator = 0x6c02a9d61f9d534f23789253c7f1d531 (8) # Executing section authorize from file /etc/raddb/sites-enabled/default (8) authorize { (8) filter_username filter_username { (8) if (!&User-Name) (8) if (!&User-Name) -> FALSE (8) if (&User-Name =~ / /) (8) if (&User-Name =~ / /) -> FALSE (8) if (&User-Name =~ /@.*@/ ) (8) if (&User-Name =~ /@.*@/ ) -> FALSE (8) if (&User-Name =~ /\\.\\./ ) (8) if (&User-Name =~ /\\.\\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\\.(.+)$/)) (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\\.$/) (8) if (&User-Name =~ /\\.$/) -> FALSE (8) if (&User-Name =~ /(a)\\./) (8) if (&User-Name =~ /(a)\\./) -> FALSE (8) } # filter_username filter_username = notfound (8) [preprocess] = ok (8) operator-name.authorize operator-name.authorize { (8) if ("%{client:Operator-Name}") (8) Client does not contain config item "Operator-Name" (8) EXPAND %{client:Operator-Name} (8) --> (8) if ("%{client:Operator-Name}") -> FALSE (8) } # operator-name.authorize operator-name.authorize = ok (8) [chap] = noop (8) [mschap] = noop (8) suffix : Checking for suffix after "@" (8) suffix : No '@' in User-Name = "zz9930", looking up realm NULL (8) suffix : No such realm "NULL" (8) [suffix] = noop (8) eap : Peer sent code Response (2) ID 9 length 43 (8) eap : Continuing tunnel setup (8) [eap] = ok (8) } # authorize = ok (8) Found Auth-Type = EAP (8) # Executing group from file /etc/raddb/sites-enabled/default (8) authenticate { (8) eap : Expiring EAP session with state 0xa7933f27a09a2648 (8) eap : Finished EAP session with state 0xa7933f27a09a2648 (8) eap : Previous EAP request found for state 0xa7933f27a09a2648, released from the list (8) eap : Peer sent method PEAP (25) (8) eap : EAP PEAP (25) (8) eap : Calling eap_peap to process EAP data (8) eap_peap : processing EAP-TLS (8) eap_peap : eaptls_verify returned 7 (8) eap_peap : Done initial handshake (8) eap_peap : eaptls_process returned 7 (8) eap_peap : FR_TLS_OK (8) eap_peap : Session established. Decoding tunneled attributes (8) eap_peap : Peap state send tlv failure (8) eap_peap : Received EAP-TLV response (8) eap_peap : The users session was previously rejected: returning reject (again.) (8) eap_peap : *** This means you need to read the PREVIOUS messages in the debug output (8) eap_peap : *** to find out the reason why the user was rejected (8) eap_peap : *** Look for "reject" or "fail". Those earlier messages will tell you (8) eap_peap : *** what went wrong, and how to fix the problem SSL: Removing session 1d69cd59382c1a906f18f235954d3f197e12772ac9e6f0d322e9ef69ea577c87 from the cache (8) ERROR: eap : Failed continuing EAP PEAP (25) session. EAP sub-module failed (8) eap : Failed in EAP select (8) [eap] = invalid (8) } # authenticate = invalid (8) Failed to authenticate the user (8) Using Post-Auth-Type Reject (8) # Executing group from file /etc/raddb/sites-enabled/default (8) Post-Auth-Type REJECT { (8) attr_filter.access_reject : EXPAND %{User-Name} (8) attr_filter.access_reject : --> zz9930 (8) attr_filter.access_reject : Matched entry DEFAULT at line 11 (8) [attr_filter.access_reject] = updated (8) eap : Reply already contained an EAP-Message, not inserting EAP-Failure (8) [eap] = noop (8) remove_reply_message_if_eap remove_reply_message_if_eap { (8) if (&reply:EAP-Message && &reply:Reply-Message) (8) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (8) else else { (8) [noop] = noop (8) } # else else = noop (8) } # remove_reply_message_if_eap remove_reply_message_if_eap = noop (8) } # Post-Auth-Type REJECT = updated (8) Delaying response for 1 seconds Waking up in 0.6 seconds. (8) Sending delayed response (8) Sending Access-Reject packet to host 141.217.152.122 port 53954, id=0, length=0 (8) EAP-Message = 0x04090004 (8) Message-Authenticator = 0x00000000000000000000000000000000 Sending Access-Reject Id 0 from 141.217.0.164:1812 to 141.217.152.122:53954 EAP-Message = 0x04090004 Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.7 seconds. (0) Cleaning up request packet ID 248 with timestamp +751 (1) Cleaning up request packet ID 249 with timestamp +751 (2) Cleaning up request packet ID 250 with timestamp +751 (3) Cleaning up request packet ID 251 with timestamp +751 (4) Cleaning up request packet ID 252 with timestamp +751 (5) Cleaning up request packet ID 253 with timestamp +751 (6) Cleaning up request packet ID 254 with timestamp +751 (7) Cleaning up request packet ID 255 with timestamp +751 (8) Cleaning up request packet ID 0 with timestamp +751 Ready to process requests

2 3

Script not working when runned by service in CentOS
by Lasse Odden 04 May '17

04 May '17

Hello! I have som troubles getting my configuration to work when I run it as a service. When I run it in manually it is working fine. I've tried to add the radiusd to root and change file permissions back and forth on my perl-scripts. Nothing changes. Here is the config for the service: [Unit] Description=FreeRADIUS high performance RADIUS server. After=syslog.target network.target [Service] Type=forking PIDFile=/var/run/radiusd/radiusd.pid ExecStartPre=-/bin/chown -R radiusd.radiusd /var/run/radiusd ExecStartPre=/usr/sbin/radiusd -C ExecStart=/usr/sbin/radiusd -d /etc/raddb -t -X ExecReload=/usr/sbin/radiusd -C ExecReload=/bin/kill -HUP $MAINPID [Install] WantedBy=multi-user.target Here is the output I get from the service with journalctl: May 04 10:22:23 freeradius1.hedmark.org radiusd[27369]: Program returned code (0) and output 'NT_STATUS_OK: Success (0x0)' May 04 10:22:23 freeradius1.hedmark.org radiusd[27369]: (1) ntlm_auth : Program executed successfully May 04 10:22:23 freeradius1.hedmark.org radiusd[27369]: (1) [ntlm_auth] = ok May 04 10:22:23 freeradius1.hedmark.org radiusd[27369]: (1) perl_attr_check : $RAD_REQUEST{'User-Name'} = &request:User-Name -> 'k00jlod' May 04 10:22:23 freeradius1.hedmark.org radiusd[27369]: (1) perl_attr_check : $RAD_REQUEST{'User-Password'} = &request:User-Password -> 'password' May 04 10:22:23 freeradius1.hedmark.org radiusd[27369]: (1) perl_attr_check : $RAD_REQUEST{'NAS-IP-Address'} = &request:NAS-IP-Address -> '172.28.0.18' May 04 10:22:23 freeradius1.hedmark.org radiusd[27369]: (1) perl_attr_check : $RAD_REQUEST{'NAS-Port'} = &request:NAS-Port -> '48865280' May 04 10:22:23 freeradius1.hedmark.org radiusd[27369]: (1) perl_attr_check : $RAD_REQUEST{'Called-Station-Id'} = &request:Called-Station-Id -> '82.147.36.212' May 04 10:22:23 freeradius1.hedmark.org radiusd[27369]: (1) perl_attr_check : $RAD_REQUEST{'Calling-Station-Id'} = &request:Calling-Station-Id -> '77.106.182.238' May 04 10:22:23 freeradius1.hedmark.org radiusd[27369]: (1) perl_attr_check : $RAD_REQUEST{'NAS-Port-Type'} = &request:NAS-Port-Type -> 'Virtual' May 04 10:22:23 freeradius1.hedmark.org radiusd[27369]: (1) perl_attr_check : $RAD_REQUEST{'Tunnel-Client-Endpoint'} = &request:Tunnel-Client-Endpoint -> '77.106.182.238' May 04 10:22:23 freeradius1.hedmark.org radiusd[27369]: (1) perl_attr_check : $RAD_REQUEST{'Event-Timestamp'} = &request:Event-Timestamp -> 'May 4 2017 10:22:23 CEST' May 04 10:22:23 freeradius1.hedmark.org radiusd[27369]: (1) perl_attr_check : $RAD_REQUEST{'Cisco-AVPair'} = &request:Cisco-AVPair -> 'ip:source-ip=77.106.182.238' May 04 10:22:23 freeradius1.hedmark.org radiusd[27369]: (1) perl_attr_check : $RAD_REQUEST{'ASA-TunnelGroupName'} = &request:ASA-TunnelGroupName -> 'Two-factor' May 04 10:22:23 freeradius1.hedmark.org radiusd[27369]: (1) perl_attr_check : $RAD_REQUEST{'ASA-ClientType'} = &request:ASA-ClientType -> 'AnyConnect-Client-SSL-VPN' May 04 10:22:23 freeradius1.hedmark.org radiusd[27369]: (1) perl_attr_check : $RAD_CHECK{'Auth-Type'} = &control:Auth-Type -> 'ntlm_auth' May 04 10:22:23 freeradius1.hedmark.org radiusd[27369]: (1) perl_attr_check : $RAD_CONFIG{'Auth-Type'} = &control:Auth-Type -> 'ntlm_auth' May 04 10:22:23 freeradius1.hedmark.org radiusd[27369]: rlm_perl: perl_embed:: module = /etc/raddb/mods-config/perl_attr_check/ attribute_check.pl , func = authenticate exit status= Cannot connect to LDAP at /etc/raddb/mods-config/perl_attr_check/attribute_check.pl line 137, <DATA> line 747. May 04 10:22:23 freeradius1.hedmark.org systemd[1]: radiusd.service: control process exited, code=killed status=11 May 04 10:22:23 freeradius1.hedmark.org systemd[1]: Failed to start FreeRADIUS high performance RADIUS server.. May 04 10:22:23 freeradius1.hedmark.org systemd[1]: Unit radiusd.service entered failed state. May 04 10:22:23 freeradius1.hedmark.org systemd[1]: radiusd.service failed. As you can see, it is complaining on the ldap binding in my perl script. Here is the binding in the perl-script: ...... sub authenticate { my $ldapresult; #Define parameters my $server = '10.0.0.1'; my $port = '12345'; my $binduser = 'cn=user,dc=domain,dc=org'; my $password = "password"; #connect to LDAP and bind as user my $ldap = Net::LDAP->new("ldaps://$server", port=> $port, timeout => 10) or die "Cannot connect to LDAP"; my $mesg = $ldap->bind($binduser , password => $password ); my $result = $ldap->search( base => "ou=users,dc=domain,dc=org", filter => "(uid=$RAD_REQUEST{'User-Name'})"); die $result->error if $result->code; foreach my $entry ($result->entries) { $ldapresult = $entry->get_value("userParameters"); } $ldap->unbind; if (defined $ldapresult) { $RAD_CHECK{'Response-Packet-Type'} = "Access-Challenge"; $RAD_REPLY{'Reply-Message'} = "Tast inn din engangskode."; my $range = 89999; my $minimum = 10000; my $random = int(rand($range)) + $minimum; $RAD_REPLY{'State'} = $random; return RLM_MODULE_HANDLED; } else { return RLM_MODULE_OK; } } ...... And at last, here is the output from when I run it manually: [root@freeradius1 raddb]# /usr/sbin/radiusd -d /etc/raddb -t -X radiusd: FreeRADIUS Version 3.0.4, for host x86_64-redhat-linux-gnu, built on Jan 17 2017 at 18:49:55 Copyright (C) 1999-2014 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/raddb/dictionary including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/mods-enabled/ including configuration file /etc/raddb/mods-enabled/always including configuration file /etc/raddb/mods-enabled/attr_filter including configuration file /etc/raddb/mods-enabled/cache_eap including configuration file /etc/raddb/mods-enabled/chap including configuration file /etc/raddb/mods-enabled/detail including configuration file /etc/raddb/mods-enabled/detail.log including configuration file /etc/raddb/mods-enabled/dhcp including configuration file /etc/raddb/mods-enabled/digest including configuration file /etc/raddb/mods-enabled/dynamic_clients including configuration file /etc/raddb/mods-enabled/eap including configuration file /etc/raddb/mods-enabled/echo including configuration file /etc/raddb/mods-enabled/exec including configuration file /etc/raddb/mods-enabled/expiration including configuration file /etc/raddb/mods-enabled/expr including configuration file /etc/raddb/mods-enabled/files including configuration file /etc/raddb/mods-enabled/linelog including configuration file /etc/raddb/mods-enabled/logintime including configuration file /etc/raddb/mods-enabled/mschap including configuration file /etc/raddb/mods-enabled/ntlm_auth including configuration file /etc/raddb/mods-enabled/pap including configuration file /etc/raddb/mods-enabled/passwd including configuration file /etc/raddb/mods-enabled/preprocess including configuration file /etc/raddb/mods-enabled/radutmp including configuration file /etc/raddb/mods-enabled/realm including configuration file /etc/raddb/mods-enabled/replicate including configuration file /etc/raddb/mods-enabled/soh including configuration file /etc/raddb/mods-enabled/sradutmp including configuration file /etc/raddb/mods-enabled/unix including configuration file /etc/raddb/mods-enabled/utf8 including configuration file /etc/raddb/mods-enabled/unpack including configuration file /etc/raddb/mods-enabled/perl including configuration file /etc/raddb/mods-enabled/cache including files in directory /etc/raddb/policy.d/ including configuration file /etc/raddb/policy.d/accounting including configuration file /etc/raddb/policy.d/canonicalization including configuration file /etc/raddb/policy.d/cui including configuration file /etc/raddb/policy.d/dhcp including configuration file /etc/raddb/policy.d/eap including configuration file /etc/raddb/policy.d/filter including configuration file /etc/raddb/policy.d/operator-name including configuration file /etc/raddb/policy.d/debug including configuration file /etc/raddb/policy.d/control including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/inner-tunnel including configuration file /etc/raddb/sites-enabled/icinga main { security { user = "radiusd" group = "root" allow_core_dumps = no } } main { name = "radiusd" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" libdir = "/usr/lib64/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.49.0.0/24 { ipv4addr = 10.49.0.0/24 require_message_authenticator = no secret = <<< secret >>> shortname = "private-network-1" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.50.2.213 { ipv4addr = 10.50.2.213/32 require_message_authenticator = no secret = <<< secret >>> shortname = "icinga-host" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 172.28.0.18 { ipv4addr = 172.28.0.18/32 require_message_authenticator = no secret = <<< secret >>> shortname = "TEST-VPN" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 172.28.0.30 { ipv4addr = 172.28.0.30/32 require_message_authenticator = no secret = <<< secret >>> shortname = "TEST-VPN" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } radiusd: #### Instantiating modules #### instantiate { } modules { # Loaded module rlm_always # Instantiating module "reject" from file /etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Instantiating module "fail" from file /etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Instantiating module "ok" from file /etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Instantiating module "handled" from file /etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Instantiating module "noop" from file /etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Instantiating module "updated" from file /etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_attr_filter # Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response # Loaded module rlm_cache # Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap cache cache_eap { key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 16384 epoch = 0 add_stats = no } # Loaded module rlm_chap # Instantiating module "chap" from file /etc/raddb/mods-enabled/chap # Loaded module rlm_detail # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail detail { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } # Instantiating module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } # Instantiating module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } # Loaded module rlm_dhcp # Instantiating module "dhcp" from file /etc/raddb/mods-enabled/dhcp # Loaded module rlm_digest # Instantiating module "digest" from file /etc/raddb/mods-enabled/digest # Loaded module rlm_dynamic_clients # Instantiating module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_eap # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap eap { default_eap_type = "peap" timer_expire = 60 ignore_unknown_eap_types = no mod_accounting_username_bug = no max_sessions = 1024 } # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 ca_path = "/etc/raddb/certs" pem_file_type = yes private_key_file = "/etc/raddb/certs/wifi.domain.org.key" certificate_file = "/etc/raddb/certs/wifi.domain.org.crt" ca_file = "/etc/raddb/certs/wifi.domain.org.ca.crt" private_key_password = <<< secret >>> dh_file = "/etc/raddb/certs/dh" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" ecdh_curve = "prime256v1" cache { enable = yes lifetime = 24 max_entries = 255 } verify { } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = yes } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_method = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Loaded module rlm_exec # Instantiating module "echo" from file /etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Instantiating module "exec" from file /etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_expiration # Instantiating module "expiration" from file /etc/raddb/mods-enabled/expiration # Loaded module rlm_expr # Instantiating module "expr" from file /etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" } # Loaded module rlm_files # Instantiating module "files" from file /etc/raddb/mods-enabled/files files { filename = "/etc/raddb/mods-config/files/authorize" usersfile = "/etc/raddb/mods-config/files/authorize" acctusersfile = "/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy" compat = "cistron" } reading pairlist file /etc/raddb/mods-config/files/authorize [/etc/raddb/mods-config/files/authorize]:132 Cistron compatibility checks for entry icinga ... [/etc/raddb/mods-config/files/authorize]:192 Cistron compatibility checks for entry DEFAULT ... [/etc/raddb/mods-config/files/authorize]:199 Cistron compatibility checks for entry DEFAULT ... [/etc/raddb/mods-config/files/authorize]:206 Cistron compatibility checks for entry DEFAULT ... reading pairlist file /etc/raddb/mods-config/files/authorize [/etc/raddb/mods-config/files/authorize]:132 Cistron compatibility checks for entry icinga ... [/etc/raddb/mods-config/files/authorize]:192 Cistron compatibility checks for entry DEFAULT ... [/etc/raddb/mods-config/files/authorize]:199 Cistron compatibility checks for entry DEFAULT ... [/etc/raddb/mods-config/files/authorize]:206 Cistron compatibility checks for entry DEFAULT ... reading pairlist file /etc/raddb/mods-config/files/accounting reading pairlist file /etc/raddb/mods-config/files/pre-proxy # Loaded module rlm_linelog # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog linelog { filename = "/var/log/radius/linelog" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{Packet-Type}:-default}" } # Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/var/log/radius/linelog-accounting" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_logintime # Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_mschap # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes ntlm_auth = "/usr/bin/ntlm_auth --username=%{User-Name} --password=%{User-Password} --domain=domain.ORG" passchange { } allow_retry = yes } # Instantiating module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/usr/bin/ntlm_auth --request-nt-key --domain=domain.ORG --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_pap # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_passwd # Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Loaded module rlm_preprocess # Instantiating module "preprocess" from file /etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups" hints = "/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /etc/raddb/mods-config/preprocess/hints # Loaded module rlm_radutmp # Instantiating module "radutmp" from file /etc/raddb/mods-enabled/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_realm # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\" ignore_default = no ignore_null = no } # Loaded module rlm_replicate # Instantiating module "replicate" from file /etc/raddb/mods-enabled/replicate # Loaded module rlm_soh # Instantiating module "soh" from file /etc/raddb/mods-enabled/soh soh { dhcp = yes } # Instantiating module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_unix # Instantiating module "unix" from file /etc/raddb/mods-enabled/unix unix { radwtmp = "/var/log/radius/radwtmp" } # Loaded module rlm_utf8 # Instantiating module "utf8" from file /etc/raddb/mods-enabled/utf8 # Loaded module rlm_unpack # Instantiating module "unpack" from file /etc/raddb/mods-enabled/unpack # Loaded module rlm_perl # Instantiating module "perl_auth" from file /etc/raddb/mods-enabled/perl perl perl_auth { filename = "/etc/raddb/mods-config/perl_auth/auth.pl" func_authorize = "authorize" func_authenticate = "authenticate" func_post_auth = "post_auth" func_accounting = "accounting" func_preacct = "preacct" func_checksimul = "checksimul" func_detach = "detach" func_xlat = "xlat" func_pre_proxy = "pre_proxy" func_post_proxy = "post_proxy" func_recv_coa = "recv_coa" func_send_coa = "send_coa" } # Instantiating module "perl_attr_check" from file /etc/raddb/mods-enabled/perl perl perl_attr_check { filename = "/etc/raddb/mods-config/perl_attr_check/ attribute_check.pl" func_authorize = "authorize" func_authenticate = "authenticate" func_post_auth = "post_auth" func_accounting = "accounting" func_preacct = "preacct" func_checksimul = "checksimul" func_detach = "detach" func_xlat = "xlat" func_pre_proxy = "pre_proxy" func_post_proxy = "post_proxy" func_recv_coa = "recv_coa" func_send_coa = "send_coa" } # Instantiating module "cache" from file /etc/raddb/mods-enabled/cache cache { key = "%{User-Name}" ttl = 180 max_entries = 16384 epoch = 0 add_stats = no } } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/raddb/radiusd.conf } # server server default { # from file /etc/raddb/sites-enabled/default # Creating Auth-Type = icinga_check # Creating Auth-Type = ntlm_auth # Creating Auth-Type = perl_auth # Creating Auth-Type = digest # Creating Autz-Type = icinga_check # Loading authenticate {...} # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} } # server inner-tunnel server icinga { # from file /etc/raddb/sites-enabled/icinga # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server icinga radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 18012 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 18013 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } listen { type = "auth" ipaddr = * port = 1812 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 1813 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Listening on auth address * port 18012 as server default Listening on acct address * port 18013 as server default Listening on auth address 127.0.0.1 port 18120 as server inner-tunnel Listening on auth address * port 1812 as server icinga Listening on acct address * port 1813 as server icinga Opening new proxy socket 'proxy address * port 0' Listening on proxy address * port 40136 Ready to process requests Received Access-Request Id 182 from 172.28.0.18:63103 to 10.58.0.15:18012 length 177 User-Name = 'k00jlod' User-Password = 'password' NAS-Port = 48881664 Called-Station-Id = '82.147.36.212' Calling-Station-Id = '77.106.182.238' NAS-Port-Type = Virtual Tunnel-Client-Endpoint:0 = '77.106.182.238' NAS-IP-Address = 172.28.0.18 Cisco-AVPair = 'ip:source-ip=77.106.182.238' ASA-TunnelGroupName = 'Two-factor' ASA-ClientType = AnyConnect-Client-SSL-VPN (0) Received Access-Request packet from host 172.28.0.18 port 63103, id=182, length=177 (0) User-Name = 'k00jlod' (0) User-Password = 'password' (0) NAS-Port = 48881664 (0) Called-Station-Id = '82.147.36.212' (0) Calling-Station-Id = '77.106.182.238' (0) NAS-Port-Type = Virtual (0) Tunnel-Client-Endpoint:0 = '77.106.182.238' (0) NAS-IP-Address = 172.28.0.18 (0) Cisco-AVPair = 'ip:source-ip=77.106.182.238' (0) ASA-TunnelGroupName = 'Two-factor' (0) ASA-ClientType = AnyConnect-Client-SSL-VPN (0) # Executing section authorize from file /etc/raddb/sites-enabled/default (0) authorize { (0) filter_username filter_username { (0) if (!&User-Name) (0) if (!&User-Name) -> FALSE (0) if (&User-Name =~ / /) (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@.*@/ ) (0) if (&User-Name =~ /@.*@/ ) -> FALSE (0) if (&User-Name =~ /\\.\\./ ) (0) if (&User-Name =~ /\\.\\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\\.(.+)$/)) (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\\.$/) (0) if (&User-Name =~ /\\.$/) -> FALSE (0) if (&User-Name =~ /(a)\\./) (0) if (&User-Name =~ /(a)\\./) -> FALSE (0) } # filter_username filter_username = notfound (0) [preprocess] = ok (0) if (User-Name == "icinga") (0) if (User-Name == "icinga") -> FALSE (0) elsif (State) (0) elsif (State) -> FALSE (0) else else { (0) update control { (0) &Auth-Type := ntlm_auth (0) } # update control = noop (0) } # else else = noop (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix : Checking for suffix after "@" (0) suffix : No '@' in User-Name = "k00jlod", looking up realm NULL (0) suffix : No such realm "NULL" (0) [suffix] = noop (0) eap : No EAP-Message, not doing EAP (0) [eap] = noop (0) [expiration] = noop (0) [logintime] = noop (0) WARNING: pap : No "known good" password found for the user. Not setting Auth-Type (0) WARNING: pap : Authentication will fail unless a "known good" password is available (0) [pap] = noop (0) } # authorize = ok (0) Found Auth-Type = ntlm_auth (0) # Executing group from file /etc/raddb/sites-enabled/default (0) Auth-Type ntlm_auth { Executing: /usr/bin/ntlm_auth --request-nt-key --domain=domain.ORG --username=%{mschap:User-Name} --password=%{User-Password}: (0) ntlm_auth : EXPAND --username=%{mschap:User-Name} (0) ntlm_auth : --> --username=k00jlod (0) ntlm_auth : EXPAND --password=%{User-Password} (0) ntlm_auth : --> --password=password Program returned code (0) and output 'NT_STATUS_OK: Success (0x0)' (0) ntlm_auth : Program executed successfully (0) [ntlm_auth] = ok (0) perl_attr_check : $RAD_REQUEST{'User-Name'} = &request:User-Name -> 'k00jlod' (0) perl_attr_check : $RAD_REQUEST{'User-Password'} = &request:User-Password -> 'password' (0) perl_attr_check : $RAD_REQUEST{'NAS-IP-Address'} = &request:NAS-IP-Address -> '172.28.0.18' (0) perl_attr_check : $RAD_REQUEST{'NAS-Port'} = &request:NAS-Port -> '48881664' (0) perl_attr_check : $RAD_REQUEST{'Called-Station-Id'} = &request:Called-Station-Id -> '82.147.36.212' (0) perl_attr_check : $RAD_REQUEST{'Calling-Station-Id'} = &request:Calling-Station-Id -> '77.106.182.238' (0) perl_attr_check : $RAD_REQUEST{'NAS-Port-Type'} = &request:NAS-Port-Type -> 'Virtual' (0) perl_attr_check : $RAD_REQUEST{'Tunnel-Client-Endpoint'} = &request:Tunnel-Client-Endpoint -> '77.106.182.238' (0) perl_attr_check : $RAD_REQUEST{'Event-Timestamp'} = &request:Event-Timestamp -> 'May 4 2017 10:33:32 CEST' (0) perl_attr_check : $RAD_REQUEST{'Cisco-AVPair'} = &request:Cisco-AVPair -> 'ip:source-ip=77.106.182.238' (0) perl_attr_check : $RAD_REQUEST{'ASA-TunnelGroupName'} = &request:ASA-TunnelGroupName -> 'Two-factor' (0) perl_attr_check : $RAD_REQUEST{'ASA-ClientType'} = &request:ASA-ClientType -> 'AnyConnect-Client-SSL-VPN' (0) perl_attr_check : $RAD_CHECK{'Auth-Type'} = &control:Auth-Type -> 'ntlm_auth' (0) perl_attr_check : $RAD_CONFIG{'Auth-Type'} = &control:Auth-Type -> 'ntlm_auth' (0) perl_attr_check : &request:NAS-Port-Type = $RAD_REQUEST{'NAS-Port-Type'} -> 'Virtual' (0) perl_attr_check : &request:ASA-ClientType = $RAD_REQUEST{'ASA-ClientType'} -> 'AnyConnect-Client-SSL-VPN' (0) perl_attr_check : &request:ASA-TunnelGroupName = $RAD_REQUEST{'ASA-TunnelGroupName'} -> 'Two-factor' (0) perl_attr_check : &request:Calling-Station-Id = $RAD_REQUEST{'Calling-Station-Id'} -> '77.106.182.238' (0) perl_attr_check : &request:Called-Station-Id = $RAD_REQUEST{'Called-Station-Id'} -> '82.147.36.212' (0) perl_attr_check : &request:Cisco-AVPair = $RAD_REQUEST{'Cisco-AVPair'} -> 'ip:source-ip=77.106.182.238' (0) perl_attr_check : &request:User-Name = $RAD_REQUEST{'User-Name'} -> 'k00jlod' (0) perl_attr_check : &request:Event-Timestamp = $RAD_REQUEST{'Event-Timestamp'} -> 'May 4 2017 10:33:32 CEST' (0) perl_attr_check : &request:User-Password = $RAD_REQUEST{'User-Password'} -> 'password' (0) perl_attr_check : &request:Tunnel-Client-Endpoint:0 = $RAD_REQUEST{'Tunnel-Client-Endpoint:0'} -> '77.106.182.238' (0) perl_attr_check : &request:NAS-IP-Address = $RAD_REQUEST{'NAS-IP-Address'} -> '172.28.0.18' (0) perl_attr_check : &request:NAS-Port = $RAD_REQUEST{'NAS-Port'} -> '48881664' (0) perl_attr_check : &reply:Reply-Message = $RAD_REPLY{'Reply-Message'} -> 'Tast inn din engangskode.' (0) perl_attr_check : &reply:State = $RAD_REPLY{'State'} -> '70438' (0) perl_attr_check : &control:Response-Packet-Type = $RAD_CHECK{'Response-Packet-Type'} -> 'Access-Challenge' (0) perl_attr_check : &control:Auth-Type = $RAD_CHECK{'Auth-Type'} -> 'ntlm_auth' (0) [perl_attr_check] = handled (0) } # Auth-Type ntlm_auth = handled (0) Sending Access-Challenge packet to host 172.28.0.18 port 63103, id=182, length=0 (0) Reply-Message = 'Tast inn din engangskode.' (0) State = 0x3730343338 Sending Access-Challenge Id 182 from 10.58.0.15:18012 to 172.28.0.18:63103 Reply-Message = 'Tast inn din engangskode.' State = 0x3730343338 (0) Finished request Waking up in 4.9 seconds. (0) Cleaning up request packet ID 182 with timestamp +6 Ready to process requests Sorry for the long post, but I know how important the debug is to help. Best regards, Lasse Odden

2 2