- Freeradius-Users - lists.freeradius.org

Re: freeradius 3.0.13 refusing to start with Heartbleed-unaffected OpenSSL version
by Konstantin Knaab-Hinrichs 21 Apr '17

21 Apr '17

I compiled OpenSSL 1.0.2k from source with make. Then I make install'ed it. Just because "apt-get install --only-upgrade openssl" and I hadn't thought of using apt-get to install an older version. I'll try to rebuild it with the disable-openssl option next monday. It wasn't documented in the "custom install" section Install.rst of the source download... Thanks for the detailed info.

1 0

update reply with multiple attributes from mysql table
by Little Snooze 21 Apr '17

21 Apr '17

Hello, I'm running freeradius v3.0.4 (and can't run later version). I would like to update reply with all attributes concerning a specific user, from a mysql table. Is there a way to do that? I tried this solution, found in previous post, in this mailing list: update control { Tmp-String-0 := "%{sql:SELECT CONCAT(attribute,'#',op,'#',value) from specreply2lns where username = '%{User-Name}'}" } if ("%{explode:&control:Tmp-String-0 #}" > 0) { foreach &control:Tmp-String-0 { if ("%{Foreach-Variable-0}" =~ /^([^=]+)=(.*)$/) { update reply { "%{1}" "%{2}" "%{3}" } } } } pb is "explode" module doesn't available in earlier version of FR 3.0.7 :-( Is there a way to do that in unlang and FR V3.0.4? Many thanks,

3 4

mysql schema
by chibwe kapambwe 21 Apr '17

21 Apr '17

Hello Am a student trying to learn more about RADIUS server, specifically freeradius. Have a home lab setup were am busy experimenting with freeradius. My question is, can one create their own mysql schema for freeradius, or it can only work with the provided schema? How do you configure freeradius to use different tables for accounting especially. One other question is, how can freeradius insert a foreign key into a table. Am asking this because i would like to add a field to the accounting table which is linked to another primary key. regards bwex

3 2

About definition of conflicting condition
by Yuka K 21 Apr '17

21 Apr '17

Hello. During fast-requesting tests on ver.3.0.13, I found the following errors in the log. Sun Apr 16 15:04:36 2017 : Error: Received conflicting packet from client localhost port 30430 - ID: 0 due to unfinished request. Giving up on old request. All IDs were used and it returned to 0. Both of the ID-0 packets were valid and had the same src/dst ip/port and length, but the request authenticators and AVP(User-Name) were different. So, please let me ask two questions about it. [Q1] I thought Access-Accept was returned, but like this case, even if AVPs are different and valid, the new one is regarded as a conflicting one. Then, if the previous request's process is under QUEUED or RUNNING, it's dropped. I've read RFC 5080 about "duplicate", but I want to know the definition of a "conflicting" packet based on RFCs, as the following is mentioned in RFC 2865. 3.1. Packet Format The RADIUS server can detect a duplicate request if it has the same client source IP address and source UDP port and Identifier within a short span of time. 4.1. Access-Request Upon receipt of an Access-Request from a valid client, an appropriate reply MUST be transmitted. I was wondering if checking AVPs at least User-Name might not be bad, or should I think conflict is included in duplication? [Q2] If I try to skip the duplicate/conflict check, is it OK that setting the member "nodup" of struct rad_listen to true? I'd appreciate it.

2 2

freeradius 3.0.13 refusing to start with Heartbleed-unaffected OpenSSL version
by Konstantin Knaab-Hinrichs 21 Apr '17

21 Apr '17

Hi, having trouble getting radiusd to work because of openssl: CLI debugging: root@$HOSTNAME:/etc/raddb# openssl version OpenSSL *1.0.2k* 26 Jan 2017 root@$HOSTNAME:/etc/raddb# cat radiusd.conf | grep allow_vulnerable # allow_vulnerable_openssl: Allow the server to start with * allow_vulnerable_openssl = yes* root@$HOSTNAME:/etc/raddb# hostnamectl Static hostname: $HOSTNAME Icon name: computer-vm Chassis: vm Machine ID: $CENSORED Boot ID: $CENSORED Virtualization: vmware Operating System: Debian GNU/Linux 8 (jessie) Kernel: Linux 3.16.0-4-amd64 Architecture: x86-64 root@$HOSTNAME:/etc/raddb# radiusd -X FreeRADIUS Version 3.0.13 [snip] Debugger not attached Refusing to start with libssl version OpenSSL 1.0.1t 3 May 2016 0x1000114f (1.0.1t release) (in range 1.0.1 release - 1.0.1t rele) Security advisory CVE-2016-6304 (OCSP status request extension) For more information see https://www.openssl.org/news/secadv/20160922.txt Once you have verified libssl has been correctly patched, set security.allow_vulnerable_openssl = 'CVE-2016-6304' The same error message when entering allow_vulnerable_openssl = 'CVE-2016-6304' in radiusd.conf No matter what I search for - every search results in something similar than https://lalitvc.wordpress.com/2014/06/26/freeradius-refusing-to-start-with-… Do I have to recompile FreeRADIUS after a new installation of OpenSSL? Yours, Konstantin

3 3

Migrating freeradius install
by Dagan McGregor 21 Apr '17

21 Apr '17

Hello, I have been tasked to move a freeradius install from an old RHEL server onto CentOS 7. In the process I am looking to move the data out of a mysql database (used for dialadmin) to using static files. We are trying to keep the new configuration changes as minimal as possible for maintenance reasons. And the virtual server files look like what we need. Our site is only maintaining a small number of users with static IP addresses. A few questions... Can I pull in an external user file with an 'include' statement in a virtual server file? Via a User section? If so, if I put the server file into 'sites-enabled', do I also put the custom users file there, or should it be somewhere else? Cheers, Dagan McGregor

2 3

VLAN Post Auth
by Richard Laing 20 Apr '17

20 Apr '17

Hi there I am looking for help with setting up post authentication VLAN's with LDAP groups enabled, at present I have made a test environment and I attempting to have the groups from the LDAP server act as the determine factor in which VLAN is assigned. I have the connection to the LDAP server working and I can look up users inside the schema and them authenticated correctly at present, however once I try to place multiple VLAN's into the users file I am unable to have the post auth work, please note I while the name has Skype in the title there are no MS products involved just reusing my pfsense lab box that was setup for a previous test with Skype, also the LDAP server is current version of FreeIPA in the CentOS repos. If you require any more information please let me know and I will respond appropriately, thank you for your time. /etc/raddb/users DEFAULT Ldap-Group == "cn=freeradius,cn=groups,cn=accounts,dc=acskpye,dc=com" Tunnel-Type = VLAN, Tunnel-Medium-Type = "IEEE-802", Tunnel-Private-Group-Id = "11" DEFAULT Ldap-Group == "cn=ops,cn=groups,cn=accounts,dc=acskype,dc=com" Tunnel-Type = VLAN, Tunnel-Medium-Type = "IEEE-802", Tunnel-Private-Group-Id = "12" DEFAULT Auth-Type := Reject FreeRADIUS Version 3.0.4 installed onto CentOS 7 Radius Out Log [root@ipa01 ~]# radiusd -xx -l stdout -f radiusd: FreeRADIUS Version 3.0.4, for host x86_64-redhat-linux-gnu, built on Jan 17 2017 at 18:49:55 Copyright (C) 1999-2014 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/raddb/dictionary including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/mods-enabled/ including configuration file /etc/raddb/mods-enabled/always including configuration file /etc/raddb/mods-enabled/attr_filter including configuration file /etc/raddb/mods-enabled/cache_eap including configuration file /etc/raddb/mods-enabled/chap including configuration file /etc/raddb/mods-enabled/detail including configuration file /etc/raddb/mods-enabled/detail.log including configuration file /etc/raddb/mods-enabled/dhcp including configuration file /etc/raddb/mods-enabled/digest including configuration file /etc/raddb/mods-enabled/dynamic_clients including configuration file /etc/raddb/mods-enabled/eap including configuration file /etc/raddb/mods-enabled/echo including configuration file /etc/raddb/mods-enabled/exec including configuration file /etc/raddb/mods-enabled/expiration including configuration file /etc/raddb/mods-enabled/expr including configuration file /etc/raddb/mods-enabled/files including configuration file /etc/raddb/mods-enabled/linelog including configuration file /etc/raddb/mods-enabled/logintime including configuration file /etc/raddb/mods-enabled/mschap including configuration file /etc/raddb/mods-enabled/ntlm_auth including configuration file /etc/raddb/mods-enabled/pap including configuration file /etc/raddb/mods-enabled/passwd including configuration file /etc/raddb/mods-enabled/preprocess including configuration file /etc/raddb/mods-enabled/radutmp including configuration file /etc/raddb/mods-enabled/realm including configuration file /etc/raddb/mods-enabled/replicate including configuration file /etc/raddb/mods-enabled/soh including configuration file /etc/raddb/mods-enabled/sradutmp including configuration file /etc/raddb/mods-enabled/unix including configuration file /etc/raddb/mods-enabled/unpack including configuration file /etc/raddb/mods-enabled/utf8 including configuration file /etc/raddb/mods-enabled/ldap including files in directory /etc/raddb/policy.d/ including configuration file /etc/raddb/policy.d/accounting including configuration file /etc/raddb/policy.d/canonicalization including configuration file /etc/raddb/policy.d/control including configuration file /etc/raddb/policy.d/cui including configuration file /etc/raddb/policy.d/debug including configuration file /etc/raddb/policy.d/dhcp including configuration file /etc/raddb/policy.d/eap including configuration file /etc/raddb/policy.d/filter including configuration file /etc/raddb/policy.d/operator-name including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/inner-tunnel main { security { user = "radiusd" group = "radiusd" allow_core_dumps = no } } main { name = "radiusd" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" libdir = "/usr/lib64/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localnet { ipaddr = 192.168.10.0/24 require_message_authenticator = no secret = <<< secret >>> nas_type = "other<----->#" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } radiusd: #### Instantiating modules #### instantiate { } modules { # Loaded module rlm_always # Instantiating module "reject" from file /etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Instantiating module "fail" from file /etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Instantiating module "ok" from file /etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Instantiating module "handled" from file /etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Instantiating module "noop" from file /etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Instantiating module "updated" from file /etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_attr_filter # Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response # Loaded module rlm_cache # Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap cache cache_eap { key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 16384 epoch = 0 add_stats = no } # Loaded module rlm_chap # Instantiating module "chap" from file /etc/raddb/mods-enabled/chap # Loaded module rlm_detail # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail detail { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } # Instantiating module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } # Instantiating module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } # Loaded module rlm_dhcp # Instantiating module "dhcp" from file /etc/raddb/mods-enabled/dhcp # Loaded module rlm_digest # Instantiating module "digest" from file /etc/raddb/mods-enabled/digest # Loaded module rlm_dynamic_clients # Instantiating module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_eap # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no mod_accounting_username_bug = no max_sessions = 1024 } # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { } debug: 'tls' option missing, trying to use legacy configuration tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 ca_path = "/etc/raddb/certs" pem_file_type = yes private_key_file = "/etc/raddb/certs/server.key" certificate_file = "/etc/raddb/certs/server.pem" ca_file = "/etc/raddb/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/raddb/certs/dh" random_file = "/dev/urandom" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" ecdh_curve = "prime256v1" cache { enable = no lifetime = 24 max_entries = 255 } verify { } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/"<http://127.0.0.1/ocsp/> use_nonce = yes timeout = 0 softfail = yes } } # Linked to sub-module rlm_eap_ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = yes virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } debug: 'tls' option missing, trying to use legacy configuration Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { default_method = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = yes proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } debug: 'tls' option missing, trying to use legacy configuration Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Loaded module rlm_exec # Instantiating module "echo" from file /etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Instantiating module "exec" from file /etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_expiration # Instantiating module "expiration" from file /etc/raddb/mods-enabled/expiration # Loaded module rlm_expr # Instantiating module "expr" from file /etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" } # Loaded module rlm_files # Instantiating module "files" from file /etc/raddb/mods-enabled/files files { filename = "/etc/raddb/mods-config/files/authorize" usersfile = "/etc/raddb/mods-config/files/authorize" acctusersfile = "/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy" compat = "cistron" } reading pairlist file /etc/raddb/mods-config/files/authorize [/etc/raddb/mods-config/files/authorize]:246 Cistron compatibility checks for entry DEFAULT ... [/etc/raddb/mods-config/files/authorize]:251 Cistron compatibility checks for entry DEFAULT ... [/etc/raddb/mods-config/files/authorize]:256 Cistron compatibility checks for entry DEFAULT ... reading pairlist file /etc/raddb/mods-config/files/authorize [/etc/raddb/mods-config/files/authorize]:246 Cistron compatibility checks for entry DEFAULT ... [/etc/raddb/mods-config/files/authorize]:251 Cistron compatibility checks for entry DEFAULT ... [/etc/raddb/mods-config/files/authorize]:256 Cistron compatibility checks for entry DEFAULT ... reading pairlist file /etc/raddb/mods-config/files/accounting reading pairlist file /etc/raddb/mods-config/files/pre-proxy # Loaded module rlm_linelog # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog linelog { filename = "/var/log/radius/linelog" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{Packet-Type}:-default}" } # Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/var/log/radius/linelog-accounting" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_logintime # Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_mschap # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes } # Instantiating module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_pap # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_passwd # Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Loaded module rlm_preprocess # Instantiating module "preprocess" from file /etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups" hints = "/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /etc/raddb/mods-config/preprocess/hints # Loaded module rlm_radutmp # Instantiating module "radutmp" from file /etc/raddb/mods-enabled/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_realm # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\" ignore_default = no ignore_null = no } # Loaded module rlm_replicate # Instantiating module "replicate" from file /etc/raddb/mods-enabled/replicate # Loaded module rlm_soh # Instantiating module "soh" from file /etc/raddb/mods-enabled/soh soh { dhcp = yes } # Instantiating module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_unix # Instantiating module "unix" from file /etc/raddb/mods-enabled/unix unix { radwtmp = "/var/log/radius/radwtmp" } # Loaded module rlm_unpack # Instantiating module "unpack" from file /etc/raddb/mods-enabled/unpack # Loaded module rlm_utf8 # Instantiating module "utf8" from file /etc/raddb/mods-enabled/utf8 # Loaded module rlm_ldap # Instantiating module "ldap" from file /etc/raddb/mods-enabled/ldap ldap { server = "ipa01.acskype.com" port = 389 password = <<< secret >>> identity = "" user { filter = "(uid=%{%{Stripped-User-Name}:-%{User-Name}})" scope = "sub" base_dn = "dc=acskype,dc=com" access_positive = yes } group { filter = "(objectClass=posixGroup)" scope = "sub" base_dn = "dc=acskype,dc=com" name_attribute = "cn" membership_attribute = "memberOf" cacheable_name = no cacheable_dn = no } client { filter = "(objectClass=frClient)" scope = "sub" base_dn = "dc=acskype,dc=com" attribute { identifier = "radiusClientIdentifier" shortname = "cn" secret = "radiusClientSecret" } } profile { filter = "(&)" } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 1 res_timeout = 20 srv_timelimit = 20 idle = 60 probes = 3 interval = 3 } tls { start_tls = no } } rlm_ldap: Falling back to build time libldap version info. Query for LDAP_OPT_API_INFO returned: -1 rlm_ldap: libldap vendor: OpenLDAP version: 20440 accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } rlm_ldap (ldap): Initialising connection pool pool { start = 5 min = 4 max = 32 spare = 3 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 1 spread = no } rlm_ldap (ldap): Opening additional connection (0) rlm_ldap (ldap): Connecting to ipa01.acskype.com:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (1) rlm_ldap (ldap): Connecting to ipa01.acskype.com:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (2) rlm_ldap (ldap): Connecting to ipa01.acskype.com:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (3) rlm_ldap (ldap): Connecting to ipa01.acskype.com:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (4) rlm_ldap (ldap): Connecting to ipa01.acskype.com:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/raddb/radiusd.conf } # server server default { # from file /etc/raddb/sites-enabled/default # Creating Auth-Type = digest # Creating Auth-Type = LDAP # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} Ignoring "sql" (see raddb/mods-available/README.rst) # Loading post-proxy {...} # Loading post-auth {...} } # server default server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} } # server inner-tunnel thread pool { start_servers = 5 max_servers = 32 min_spare_servers = 3 max_spare_servers = 10 max_requests_per_server = 0 cleanup_delay = 5 max_queue_size = 65536 auto_limit_acct = no } Thread spawned new child 1. Total threads in pool: 1 Thread spawned new child 2. Total threads in pool: 2 Thread spawned new child 3. Total threads in pool: 3 Thread spawned new child 4. Total threads in pool: 4 Thread 1 waiting to be assigned a request Thread 3 waiting to be assigned a request Thread 2 waiting to be assigned a request Thread spawned new child 5. Total threads in pool: 5 Thread pool initialized radiusd: #### Opening IP addresses and Ports #### Thread 4 waiting to be assigned a request Thread 5 waiting to be assigned a request listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 as server default Listening on acct address * port 1813 as server default Listening on auth address :: port 1812 as server default Listening on acct address :: port 1813 as server default Listening on auth address 127.0.0.1 port 18120 as server inner-tunnel Opening new proxy socket 'proxy address * port 0' Listening on proxy address * port 52920 Ready to process requests Received Access-Request Id 114 from 192.168.10.8:53461 to 192.168.10.2:1812 length 78 Threads: total/active/spare threads = 5/0/5 Waking up in 0.3 seconds. Thread 3 got semaphore Thread 3 handling request 0, (1 handled so far) User-Name = 'richardl' User-Password = 'Testing 101' NAS-IP-Address = 192.168.10.8 NAS-Port = 0 Message-Authenticator = 0x8b3000126683364c527c89ed50794a37 (0) Received Access-Request packet from host 192.168.10.8 port 53461, id=114, length=78 (0) User-Name = 'richardl' (0) User-Password = 'Testing 101' (0) NAS-IP-Address = 192.168.10.8 (0) NAS-Port = 0 (0) Message-Authenticator = 0x8b3000126683364c527c89ed50794a37 (0) # Executing section authorize from file /etc/raddb/sites-enabled/default (0) authorize { (0) filter_username filter_username { (0) if (!&User-Name) (0) if (!&User-Name) -> FALSE (0) if (&User-Name =~ / /) (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@.*@/ ) (0) if (&User-Name =~ /@.*@/ ) -> FALSE (0) if (&User-Name =~ /\\.\\./ ) (0) if (&User-Name =~ /\\.\\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\\.(.+)$/)) (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\\.$/) (0) if (&User-Name =~ /\\.$/) -> FALSE (0) if (&User-Name =~ /(a)\\./) (0) if (&User-Name =~ /(a)\\./) -> FALSE (0) } # filter_username filter_username = notfound (0) [preprocess] = ok (0) suffix : Checking for suffix after "@" (0) suffix : No '@' in User-Name = "richardl", looking up realm NULL (0) suffix : No such realm "NULL" (0) [suffix] = noop (0) eap : No EAP-Message, not doing EAP (0) [eap] = noop (0) files : Searching for user in group "cn=freeradius,cn=groups,cn=accounts,dc=acskpye,dc=com" rlm_ldap (ldap): Reserved connection (4) (0) files : EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (0) files : --> (uid=richardl) (0) files : EXPAND dc=acskype,dc=com (0) files : --> dc=acskype,dc=com (0) files : Performing search in 'dc=acskype,dc=com' with filter '(uid=richardl)', scope 'sub' (0) files : Waiting for search result... (0) files : User object found at DN "uid=richardl,cn=users,cn=compat,dc=acskype,dc=com" (0) files : Checking user object membership (memberOf) attributes (0) files : Performing unfiltered search in 'uid=richardl,cn=users,cn=compat,dc=acskype,dc=com', scope 'base' (0) files : Waiting for search result... (0) files : No group membership attribute(s) found in user object rlm_ldap (ldap): Released connection (4) rlm_ldap (ldap): Closing connection (0), from 1 unused connections (0) files : User is not a member of specified group (0) files : Searching for user in group "cn=ops,cn=groups,cn=accounts,dc=acskype,dc=com" rlm_ldap (ldap): Reserved connection (4) (0) files : Using user DN from request "uid=richardl,cn=users,cn=compat,dc=acskype,dc=com" (0) files : Checking user object membership (memberOf) attributes (0) files : Performing unfiltered search in 'uid=richardl,cn=users,cn=compat,dc=acskype,dc=com', scope 'base' (0) files : Waiting for search result... (0) files : No group membership attribute(s) found in user object rlm_ldap (ldap): Released connection (4) (0) files : User is not a member of specified group (0) files : users: Matched entry DEFAULT at line 256 (0) [files] = ok rlm_ldap (ldap): Reserved connection (4) (0) ldap : EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (0) ldap : --> (uid=richardl) (0) ldap : EXPAND dc=acskype,dc=com (0) ldap : --> dc=acskype,dc=com (0) ldap : Performing search in 'dc=acskype,dc=com' with filter '(uid=richardl)', scope 'sub' (0) ldap : Waiting for search result... (0) ldap : User object found at DN "uid=richardl,cn=users,cn=compat,dc=acskype,dc=com" (0) ldap : Processing user attributes (0) WARNING: ldap : No "known good" password added. Ensure the admin user has permission to read the password attribute (0) WARNING: ldap : PAP authentication will *NOT* work with Active Directory (if that is what you were trying to configure) rlm_ldap (ldap): Released connection (4) (0) [ldap] = ok (0) if ((ok || updated) && User-Password) (0) if ((ok || updated) && User-Password) -> TRUE (0) if ((ok || updated) && User-Password) { (0) update { (0) control:Auth-Type := LDAP (0) } # update = noop (0) } # if ((ok || updated) && User-Password) = noop (0) [expiration] = noop (0) [logintime] = noop (0) WARNING: pap : No "known good" password found for the user. Not setting Auth-Type (0) WARNING: pap : Authentication will fail unless a "known good" password is available (0) [pap] = noop (0) } # authorize = ok (0) Found Auth-Type = LDAP (0) # Executing group from file /etc/raddb/sites-enabled/default (0) Auth-Type LDAP { (0) ldap : Login attempt by "richardl" rlm_ldap (ldap): Reserved connection (4) (0) ldap : Using user DN from request "uid=richardl,cn=users,cn=compat,dc=acskype,dc=com" (0) ldap : Waiting for bind result... (0) ldap : Bind successful (0) ldap : Bind as user "uid=richardl,cn=users,cn=compat,dc=acskype,dc=com" was successful rlm_ldap (ldap): Released connection (4) (0) [ldap] = ok (0) } # Auth-Type LDAP = ok (0) # Executing section post-auth from file /etc/raddb/sites-enabled/default (0) post-auth { (0) [exec] = noop (0) remove_reply_message_if_eap remove_reply_message_if_eap { (0) if (&reply:EAP-Message && &reply:Reply-Message) (0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (0) else else { (0) [noop] = noop (0) } # else else = noop (0) } # remove_reply_message_if_eap remove_reply_message_if_eap = noop (0) } # post-auth = noop (0) Sending Access-Accept packet to host 192.168.10.8 port 53461, id=114, length=0 Sending Access-Accept Id 114 from 192.168.10.2:1812 to 192.168.10.8:53461 (0) Finished request Thread 3 waiting to be assigned a request Waking up in 4.6 seconds.

3 5

How to have Freeradius handling multiple appliations
by Kenroy 19 Apr '17

19 Apr '17

Hi everyone, I have an access gateway that is being used by multiple applications. each application handles traffic for different VLAN (NAS-PortID). I was thinking of creating a policy for each application and filter requests for the different VLANs they handle . Then have the policy make a request to the web service for the application to get the AVP for each request coming in . Is this the best way to handle this or is using the python or Perl modules the better way ? Kenroy

2 3

SIP2 module?
by Aaron Dalla-Longa 19 Apr '17

19 Apr '17

We currently are using a server system from a vendor that supports SIP2 authentication and sockets for many different things. I am hearing back from them that LDAP may not be possible for authenticating against our users. Does freeradius support authentication vs a SIP2 socket? -- *Aaron Dalla-Longa* Systems Administrator Shortgrass Library System tf: 1.866.529.0550 | p: 403.529.0550

2 1

Force the client to use one specific EAP method
by LUCA 19 Apr '17

19 Apr '17

As Matthew suggested, I've removed the configurations for the others EAP methods, indeed now they don't work anymore. But, as Matthew already said, the clients will always choose whatever method they want to use or in the most cases the chosen method is the one set on the supplicant configuration file. I thought of making a script that would change the 802.1x configuration of the supplicant, but then every client should download and run the script, which is no practical at all. So, any other workaround that you're aware of? I was wondering if adding a realm could help somehow. Luca

4 8