- Freeradius-Users - lists.freeradius.org

freeradius 3.0.13 refusing to start with Heartbleed-unaffected OpenSSL version
by Konstantin Knaab-Hinrichs 21 Apr '17

21 Apr '17

Hi, having trouble getting radiusd to work because of openssl: CLI debugging: root@$HOSTNAME:/etc/raddb# openssl version OpenSSL *1.0.2k* 26 Jan 2017 root@$HOSTNAME:/etc/raddb# cat radiusd.conf | grep allow_vulnerable # allow_vulnerable_openssl: Allow the server to start with * allow_vulnerable_openssl = yes* root@$HOSTNAME:/etc/raddb# hostnamectl Static hostname: $HOSTNAME Icon name: computer-vm Chassis: vm Machine ID: $CENSORED Boot ID: $CENSORED Virtualization: vmware Operating System: Debian GNU/Linux 8 (jessie) Kernel: Linux 3.16.0-4-amd64 Architecture: x86-64 root@$HOSTNAME:/etc/raddb# radiusd -X FreeRADIUS Version 3.0.13 [snip] Debugger not attached Refusing to start with libssl version OpenSSL 1.0.1t 3 May 2016 0x1000114f (1.0.1t release) (in range 1.0.1 release - 1.0.1t rele) Security advisory CVE-2016-6304 (OCSP status request extension) For more information see https://www.openssl.org/news/secadv/20160922.txt Once you have verified libssl has been correctly patched, set security.allow_vulnerable_openssl = 'CVE-2016-6304' The same error message when entering allow_vulnerable_openssl = 'CVE-2016-6304' in radiusd.conf No matter what I search for - every search results in something similar than https://lalitvc.wordpress.com/2014/06/26/freeradius-refusing-to-start-with-… Do I have to recompile FreeRADIUS after a new installation of OpenSSL? Yours, Konstantin

3 3

Migrating freeradius install
by Dagan McGregor 21 Apr '17

21 Apr '17

Hello, I have been tasked to move a freeradius install from an old RHEL server onto CentOS 7. In the process I am looking to move the data out of a mysql database (used for dialadmin) to using static files. We are trying to keep the new configuration changes as minimal as possible for maintenance reasons. And the virtual server files look like what we need. Our site is only maintaining a small number of users with static IP addresses. A few questions... Can I pull in an external user file with an 'include' statement in a virtual server file? Via a User section? If so, if I put the server file into 'sites-enabled', do I also put the custom users file there, or should it be somewhere else? Cheers, Dagan McGregor

2 3

VLAN Post Auth
by Richard Laing 20 Apr '17

20 Apr '17

Hi there I am looking for help with setting up post authentication VLAN's with LDAP groups enabled, at present I have made a test environment and I attempting to have the groups from the LDAP server act as the determine factor in which VLAN is assigned. I have the connection to the LDAP server working and I can look up users inside the schema and them authenticated correctly at present, however once I try to place multiple VLAN's into the users file I am unable to have the post auth work, please note I while the name has Skype in the title there are no MS products involved just reusing my pfsense lab box that was setup for a previous test with Skype, also the LDAP server is current version of FreeIPA in the CentOS repos. If you require any more information please let me know and I will respond appropriately, thank you for your time. /etc/raddb/users DEFAULT Ldap-Group == "cn=freeradius,cn=groups,cn=accounts,dc=acskpye,dc=com" Tunnel-Type = VLAN, Tunnel-Medium-Type = "IEEE-802", Tunnel-Private-Group-Id = "11" DEFAULT Ldap-Group == "cn=ops,cn=groups,cn=accounts,dc=acskype,dc=com" Tunnel-Type = VLAN, Tunnel-Medium-Type = "IEEE-802", Tunnel-Private-Group-Id = "12" DEFAULT Auth-Type := Reject FreeRADIUS Version 3.0.4 installed onto CentOS 7 Radius Out Log [root@ipa01 ~]# radiusd -xx -l stdout -f radiusd: FreeRADIUS Version 3.0.4, for host x86_64-redhat-linux-gnu, built on Jan 17 2017 at 18:49:55 Copyright (C) 1999-2014 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/raddb/dictionary including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/mods-enabled/ including configuration file /etc/raddb/mods-enabled/always including configuration file /etc/raddb/mods-enabled/attr_filter including configuration file /etc/raddb/mods-enabled/cache_eap including configuration file /etc/raddb/mods-enabled/chap including configuration file /etc/raddb/mods-enabled/detail including configuration file /etc/raddb/mods-enabled/detail.log including configuration file /etc/raddb/mods-enabled/dhcp including configuration file /etc/raddb/mods-enabled/digest including configuration file /etc/raddb/mods-enabled/dynamic_clients including configuration file /etc/raddb/mods-enabled/eap including configuration file /etc/raddb/mods-enabled/echo including configuration file /etc/raddb/mods-enabled/exec including configuration file /etc/raddb/mods-enabled/expiration including configuration file /etc/raddb/mods-enabled/expr including configuration file /etc/raddb/mods-enabled/files including configuration file /etc/raddb/mods-enabled/linelog including configuration file /etc/raddb/mods-enabled/logintime including configuration file /etc/raddb/mods-enabled/mschap including configuration file /etc/raddb/mods-enabled/ntlm_auth including configuration file /etc/raddb/mods-enabled/pap including configuration file /etc/raddb/mods-enabled/passwd including configuration file /etc/raddb/mods-enabled/preprocess including configuration file /etc/raddb/mods-enabled/radutmp including configuration file /etc/raddb/mods-enabled/realm including configuration file /etc/raddb/mods-enabled/replicate including configuration file /etc/raddb/mods-enabled/soh including configuration file /etc/raddb/mods-enabled/sradutmp including configuration file /etc/raddb/mods-enabled/unix including configuration file /etc/raddb/mods-enabled/unpack including configuration file /etc/raddb/mods-enabled/utf8 including configuration file /etc/raddb/mods-enabled/ldap including files in directory /etc/raddb/policy.d/ including configuration file /etc/raddb/policy.d/accounting including configuration file /etc/raddb/policy.d/canonicalization including configuration file /etc/raddb/policy.d/control including configuration file /etc/raddb/policy.d/cui including configuration file /etc/raddb/policy.d/debug including configuration file /etc/raddb/policy.d/dhcp including configuration file /etc/raddb/policy.d/eap including configuration file /etc/raddb/policy.d/filter including configuration file /etc/raddb/policy.d/operator-name including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/inner-tunnel main { security { user = "radiusd" group = "radiusd" allow_core_dumps = no } } main { name = "radiusd" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" libdir = "/usr/lib64/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localnet { ipaddr = 192.168.10.0/24 require_message_authenticator = no secret = <<< secret >>> nas_type = "other<----->#" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } radiusd: #### Instantiating modules #### instantiate { } modules { # Loaded module rlm_always # Instantiating module "reject" from file /etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Instantiating module "fail" from file /etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Instantiating module "ok" from file /etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Instantiating module "handled" from file /etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Instantiating module "noop" from file /etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Instantiating module "updated" from file /etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_attr_filter # Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response # Loaded module rlm_cache # Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap cache cache_eap { key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 16384 epoch = 0 add_stats = no } # Loaded module rlm_chap # Instantiating module "chap" from file /etc/raddb/mods-enabled/chap # Loaded module rlm_detail # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail detail { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } # Instantiating module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } # Instantiating module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } # Loaded module rlm_dhcp # Instantiating module "dhcp" from file /etc/raddb/mods-enabled/dhcp # Loaded module rlm_digest # Instantiating module "digest" from file /etc/raddb/mods-enabled/digest # Loaded module rlm_dynamic_clients # Instantiating module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_eap # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no mod_accounting_username_bug = no max_sessions = 1024 } # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { } debug: 'tls' option missing, trying to use legacy configuration tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 ca_path = "/etc/raddb/certs" pem_file_type = yes private_key_file = "/etc/raddb/certs/server.key" certificate_file = "/etc/raddb/certs/server.pem" ca_file = "/etc/raddb/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/raddb/certs/dh" random_file = "/dev/urandom" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" ecdh_curve = "prime256v1" cache { enable = no lifetime = 24 max_entries = 255 } verify { } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/"<http://127.0.0.1/ocsp/> use_nonce = yes timeout = 0 softfail = yes } } # Linked to sub-module rlm_eap_ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = yes virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } debug: 'tls' option missing, trying to use legacy configuration Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { default_method = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = yes proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } debug: 'tls' option missing, trying to use legacy configuration Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Loaded module rlm_exec # Instantiating module "echo" from file /etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Instantiating module "exec" from file /etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_expiration # Instantiating module "expiration" from file /etc/raddb/mods-enabled/expiration # Loaded module rlm_expr # Instantiating module "expr" from file /etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" } # Loaded module rlm_files # Instantiating module "files" from file /etc/raddb/mods-enabled/files files { filename = "/etc/raddb/mods-config/files/authorize" usersfile = "/etc/raddb/mods-config/files/authorize" acctusersfile = "/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy" compat = "cistron" } reading pairlist file /etc/raddb/mods-config/files/authorize [/etc/raddb/mods-config/files/authorize]:246 Cistron compatibility checks for entry DEFAULT ... [/etc/raddb/mods-config/files/authorize]:251 Cistron compatibility checks for entry DEFAULT ... [/etc/raddb/mods-config/files/authorize]:256 Cistron compatibility checks for entry DEFAULT ... reading pairlist file /etc/raddb/mods-config/files/authorize [/etc/raddb/mods-config/files/authorize]:246 Cistron compatibility checks for entry DEFAULT ... [/etc/raddb/mods-config/files/authorize]:251 Cistron compatibility checks for entry DEFAULT ... [/etc/raddb/mods-config/files/authorize]:256 Cistron compatibility checks for entry DEFAULT ... reading pairlist file /etc/raddb/mods-config/files/accounting reading pairlist file /etc/raddb/mods-config/files/pre-proxy # Loaded module rlm_linelog # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog linelog { filename = "/var/log/radius/linelog" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{Packet-Type}:-default}" } # Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/var/log/radius/linelog-accounting" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_logintime # Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_mschap # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes } # Instantiating module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_pap # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_passwd # Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Loaded module rlm_preprocess # Instantiating module "preprocess" from file /etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups" hints = "/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /etc/raddb/mods-config/preprocess/hints # Loaded module rlm_radutmp # Instantiating module "radutmp" from file /etc/raddb/mods-enabled/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_realm # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\" ignore_default = no ignore_null = no } # Loaded module rlm_replicate # Instantiating module "replicate" from file /etc/raddb/mods-enabled/replicate # Loaded module rlm_soh # Instantiating module "soh" from file /etc/raddb/mods-enabled/soh soh { dhcp = yes } # Instantiating module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_unix # Instantiating module "unix" from file /etc/raddb/mods-enabled/unix unix { radwtmp = "/var/log/radius/radwtmp" } # Loaded module rlm_unpack # Instantiating module "unpack" from file /etc/raddb/mods-enabled/unpack # Loaded module rlm_utf8 # Instantiating module "utf8" from file /etc/raddb/mods-enabled/utf8 # Loaded module rlm_ldap # Instantiating module "ldap" from file /etc/raddb/mods-enabled/ldap ldap { server = "ipa01.acskype.com" port = 389 password = <<< secret >>> identity = "" user { filter = "(uid=%{%{Stripped-User-Name}:-%{User-Name}})" scope = "sub" base_dn = "dc=acskype,dc=com" access_positive = yes } group { filter = "(objectClass=posixGroup)" scope = "sub" base_dn = "dc=acskype,dc=com" name_attribute = "cn" membership_attribute = "memberOf" cacheable_name = no cacheable_dn = no } client { filter = "(objectClass=frClient)" scope = "sub" base_dn = "dc=acskype,dc=com" attribute { identifier = "radiusClientIdentifier" shortname = "cn" secret = "radiusClientSecret" } } profile { filter = "(&)" } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 1 res_timeout = 20 srv_timelimit = 20 idle = 60 probes = 3 interval = 3 } tls { start_tls = no } } rlm_ldap: Falling back to build time libldap version info. Query for LDAP_OPT_API_INFO returned: -1 rlm_ldap: libldap vendor: OpenLDAP version: 20440 accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } rlm_ldap (ldap): Initialising connection pool pool { start = 5 min = 4 max = 32 spare = 3 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 1 spread = no } rlm_ldap (ldap): Opening additional connection (0) rlm_ldap (ldap): Connecting to ipa01.acskype.com:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (1) rlm_ldap (ldap): Connecting to ipa01.acskype.com:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (2) rlm_ldap (ldap): Connecting to ipa01.acskype.com:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (3) rlm_ldap (ldap): Connecting to ipa01.acskype.com:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (4) rlm_ldap (ldap): Connecting to ipa01.acskype.com:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/raddb/radiusd.conf } # server server default { # from file /etc/raddb/sites-enabled/default # Creating Auth-Type = digest # Creating Auth-Type = LDAP # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} Ignoring "sql" (see raddb/mods-available/README.rst) # Loading post-proxy {...} # Loading post-auth {...} } # server default server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} } # server inner-tunnel thread pool { start_servers = 5 max_servers = 32 min_spare_servers = 3 max_spare_servers = 10 max_requests_per_server = 0 cleanup_delay = 5 max_queue_size = 65536 auto_limit_acct = no } Thread spawned new child 1. Total threads in pool: 1 Thread spawned new child 2. Total threads in pool: 2 Thread spawned new child 3. Total threads in pool: 3 Thread spawned new child 4. Total threads in pool: 4 Thread 1 waiting to be assigned a request Thread 3 waiting to be assigned a request Thread 2 waiting to be assigned a request Thread spawned new child 5. Total threads in pool: 5 Thread pool initialized radiusd: #### Opening IP addresses and Ports #### Thread 4 waiting to be assigned a request Thread 5 waiting to be assigned a request listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 as server default Listening on acct address * port 1813 as server default Listening on auth address :: port 1812 as server default Listening on acct address :: port 1813 as server default Listening on auth address 127.0.0.1 port 18120 as server inner-tunnel Opening new proxy socket 'proxy address * port 0' Listening on proxy address * port 52920 Ready to process requests Received Access-Request Id 114 from 192.168.10.8:53461 to 192.168.10.2:1812 length 78 Threads: total/active/spare threads = 5/0/5 Waking up in 0.3 seconds. Thread 3 got semaphore Thread 3 handling request 0, (1 handled so far) User-Name = 'richardl' User-Password = 'Testing 101' NAS-IP-Address = 192.168.10.8 NAS-Port = 0 Message-Authenticator = 0x8b3000126683364c527c89ed50794a37 (0) Received Access-Request packet from host 192.168.10.8 port 53461, id=114, length=78 (0) User-Name = 'richardl' (0) User-Password = 'Testing 101' (0) NAS-IP-Address = 192.168.10.8 (0) NAS-Port = 0 (0) Message-Authenticator = 0x8b3000126683364c527c89ed50794a37 (0) # Executing section authorize from file /etc/raddb/sites-enabled/default (0) authorize { (0) filter_username filter_username { (0) if (!&User-Name) (0) if (!&User-Name) -> FALSE (0) if (&User-Name =~ / /) (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@.*@/ ) (0) if (&User-Name =~ /@.*@/ ) -> FALSE (0) if (&User-Name =~ /\\.\\./ ) (0) if (&User-Name =~ /\\.\\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\\.(.+)$/)) (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\\.$/) (0) if (&User-Name =~ /\\.$/) -> FALSE (0) if (&User-Name =~ /(a)\\./) (0) if (&User-Name =~ /(a)\\./) -> FALSE (0) } # filter_username filter_username = notfound (0) [preprocess] = ok (0) suffix : Checking for suffix after "@" (0) suffix : No '@' in User-Name = "richardl", looking up realm NULL (0) suffix : No such realm "NULL" (0) [suffix] = noop (0) eap : No EAP-Message, not doing EAP (0) [eap] = noop (0) files : Searching for user in group "cn=freeradius,cn=groups,cn=accounts,dc=acskpye,dc=com" rlm_ldap (ldap): Reserved connection (4) (0) files : EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (0) files : --> (uid=richardl) (0) files : EXPAND dc=acskype,dc=com (0) files : --> dc=acskype,dc=com (0) files : Performing search in 'dc=acskype,dc=com' with filter '(uid=richardl)', scope 'sub' (0) files : Waiting for search result... (0) files : User object found at DN "uid=richardl,cn=users,cn=compat,dc=acskype,dc=com" (0) files : Checking user object membership (memberOf) attributes (0) files : Performing unfiltered search in 'uid=richardl,cn=users,cn=compat,dc=acskype,dc=com', scope 'base' (0) files : Waiting for search result... (0) files : No group membership attribute(s) found in user object rlm_ldap (ldap): Released connection (4) rlm_ldap (ldap): Closing connection (0), from 1 unused connections (0) files : User is not a member of specified group (0) files : Searching for user in group "cn=ops,cn=groups,cn=accounts,dc=acskype,dc=com" rlm_ldap (ldap): Reserved connection (4) (0) files : Using user DN from request "uid=richardl,cn=users,cn=compat,dc=acskype,dc=com" (0) files : Checking user object membership (memberOf) attributes (0) files : Performing unfiltered search in 'uid=richardl,cn=users,cn=compat,dc=acskype,dc=com', scope 'base' (0) files : Waiting for search result... (0) files : No group membership attribute(s) found in user object rlm_ldap (ldap): Released connection (4) (0) files : User is not a member of specified group (0) files : users: Matched entry DEFAULT at line 256 (0) [files] = ok rlm_ldap (ldap): Reserved connection (4) (0) ldap : EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (0) ldap : --> (uid=richardl) (0) ldap : EXPAND dc=acskype,dc=com (0) ldap : --> dc=acskype,dc=com (0) ldap : Performing search in 'dc=acskype,dc=com' with filter '(uid=richardl)', scope 'sub' (0) ldap : Waiting for search result... (0) ldap : User object found at DN "uid=richardl,cn=users,cn=compat,dc=acskype,dc=com" (0) ldap : Processing user attributes (0) WARNING: ldap : No "known good" password added. Ensure the admin user has permission to read the password attribute (0) WARNING: ldap : PAP authentication will *NOT* work with Active Directory (if that is what you were trying to configure) rlm_ldap (ldap): Released connection (4) (0) [ldap] = ok (0) if ((ok || updated) && User-Password) (0) if ((ok || updated) && User-Password) -> TRUE (0) if ((ok || updated) && User-Password) { (0) update { (0) control:Auth-Type := LDAP (0) } # update = noop (0) } # if ((ok || updated) && User-Password) = noop (0) [expiration] = noop (0) [logintime] = noop (0) WARNING: pap : No "known good" password found for the user. Not setting Auth-Type (0) WARNING: pap : Authentication will fail unless a "known good" password is available (0) [pap] = noop (0) } # authorize = ok (0) Found Auth-Type = LDAP (0) # Executing group from file /etc/raddb/sites-enabled/default (0) Auth-Type LDAP { (0) ldap : Login attempt by "richardl" rlm_ldap (ldap): Reserved connection (4) (0) ldap : Using user DN from request "uid=richardl,cn=users,cn=compat,dc=acskype,dc=com" (0) ldap : Waiting for bind result... (0) ldap : Bind successful (0) ldap : Bind as user "uid=richardl,cn=users,cn=compat,dc=acskype,dc=com" was successful rlm_ldap (ldap): Released connection (4) (0) [ldap] = ok (0) } # Auth-Type LDAP = ok (0) # Executing section post-auth from file /etc/raddb/sites-enabled/default (0) post-auth { (0) [exec] = noop (0) remove_reply_message_if_eap remove_reply_message_if_eap { (0) if (&reply:EAP-Message && &reply:Reply-Message) (0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (0) else else { (0) [noop] = noop (0) } # else else = noop (0) } # remove_reply_message_if_eap remove_reply_message_if_eap = noop (0) } # post-auth = noop (0) Sending Access-Accept packet to host 192.168.10.8 port 53461, id=114, length=0 Sending Access-Accept Id 114 from 192.168.10.2:1812 to 192.168.10.8:53461 (0) Finished request Thread 3 waiting to be assigned a request Waking up in 4.6 seconds.

3 5

How to have Freeradius handling multiple appliations
by Kenroy 19 Apr '17

19 Apr '17

Hi everyone, I have an access gateway that is being used by multiple applications. each application handles traffic for different VLAN (NAS-PortID). I was thinking of creating a policy for each application and filter requests for the different VLANs they handle . Then have the policy make a request to the web service for the application to get the AVP for each request coming in . Is this the best way to handle this or is using the python or Perl modules the better way ? Kenroy

2 3

SIP2 module?
by Aaron Dalla-Longa 19 Apr '17

19 Apr '17

We currently are using a server system from a vendor that supports SIP2 authentication and sockets for many different things. I am hearing back from them that LDAP may not be possible for authenticating against our users. Does freeradius support authentication vs a SIP2 socket? -- *Aaron Dalla-Longa* Systems Administrator Shortgrass Library System tf: 1.866.529.0550 | p: 403.529.0550

2 1

Force the client to use one specific EAP method
by LUCA 19 Apr '17

19 Apr '17

As Matthew suggested, I've removed the configurations for the others EAP methods, indeed now they don't work anymore. But, as Matthew already said, the clients will always choose whatever method they want to use or in the most cases the chosen method is the one set on the supplicant configuration file. I thought of making a script that would change the 802.1x configuration of the supplicant, but then every client should download and run the script, which is no practical at all. So, any other workaround that you're aware of? I was wondering if adding a realm could help somehow. Luca

4 8

Line indentation using tabs?
by Dagan McGregor 19 Apr '17

19 Apr '17

Hi, The comments in the 'users' file mentions lines should be indented with a tab when providing options below a user name. Do all the files require configuration lines to use tabs? Or is does it only matter for user entries? Are lines ignored if they are not indented with a tab? I notice most of the configuration files use hard tabs but I am not sure if this is convenient or enforced. Our coding setup uses spaces to replace tabs, so I need to make sure my deployed files are formatting correctly. Cheers, Dagan McGregor

3 2

What attribute to use to send custom info.
by Kenroy 19 Apr '17

19 Apr '17

Hi everyone, What attribute can i use to put custom information (e.g such as a token string generated by an application) when I sent an Access-Accept and have that attribute and value be returned in the accounting packets. Kenroy

2 2

multiple instances of pam module
by Lars Hillebrand 18 Apr '17

18 Apr '17

Hello everybody, Is there a way to include multiple instances of the pam module in the radius? We are currently using a freeradius 2.2.8 with several virtual servers. Two services are to be secured by a 2-factor authentication (Google Authenticator). 1. Login VMware HorizonView (desktop-virtualization) 2. IPsec VPN connection VMware Horizon expects a login with username and passcode with a subsequent query of the password. For the login of the VPN connection the password + passcode is expected together in a field. Attempts to integrate several instances (similar to the file or ldap module) within the pam module do not work. I am thankful for every hint. Thanks in advance. Best regards Lars Hillebrand - Content of /etc/freeradius/modules/pam pam { pam_auth = radiusd } pam 2facaut_pam { pam_auth = 2facaut_pam } pam horizon_pam { pam_auth = horizon_pam } - Contents of the individual pam files from /etc/pam.d/ # /etc/pam.d/horizon_pam - PAM configuration for FreeRADIUS auth requisite pam_google_authenticator.so forward_pass try_first_pass auth [success=2 default=ignore] pam_unix.so nullok_secure auth [success=1 default=ignore] pam_ldap.so use_first_pass # /etc/pam.d/2facaut_pam - PAM configuration for FreeRADIUS auth required pam_google_authenticator.so forward_pass auth required pam_ldap.so use_first_pass - Here the debug log with separate horizon_pam configuration in the radius Tue Apr 18 12:08:41 2017 : Debug: server horizon { Tue Apr 18 12:08:41 2017 : Debug: # Executing section authorize from file /etc/freeradius/sites-enabled/horizon Tue Apr 18 12:08:41 2017 : Debug: +group authorize { Tue Apr 18 12:08:41 2017 : Debug: ++policy filter_username { Tue Apr 18 12:08:41 2017 : Debug: +++? if (User-Name =~ / /) Tue Apr 18 12:08:41 2017 : Debug: ? Evaluating (User-Name =~ / /) -> FALSE Tue Apr 18 12:08:41 2017 : Debug: +++? if (User-Name =~ / /) -> FALSE Tue Apr 18 12:08:41 2017 : Debug: +++? if (User-Name =~ /@.*@/ ) Tue Apr 18 12:08:41 2017 : Debug: ? Evaluating (User-Name =~ /@.*@/) -> FALSE Tue Apr 18 12:08:41 2017 : Debug: +++? if (User-Name =~ /@.*@/ ) -> FALSE Tue Apr 18 12:08:41 2017 : Debug: +++? if (User-Name =~ /\\.\\./ ) Tue Apr 18 12:08:41 2017 : Debug: ? Evaluating (User-Name =~ /\\.\\./) -> FALSE Tue Apr 18 12:08:41 2017 : Debug: +++? if (User-Name =~ /\\.\\./ ) -> FALSE Tue Apr 18 12:08:41 2017 : Debug: +++? if (User-Name =~ /\\.$/) Tue Apr 18 12:08:41 2017 : Debug: ? Evaluating (User-Name =~ /\\.$/) -> FALSE Tue Apr 18 12:08:41 2017 : Debug: +++? if (User-Name =~ /\\.$/) -> FALSE Tue Apr 18 12:08:41 2017 : Debug: +++? if (User-Name =~ /(a)\\./) Tue Apr 18 12:08:41 2017 : Debug: ? Evaluating (User-Name =~ /(a)\\./) -> FALSE Tue Apr 18 12:08:41 2017 : Debug: +++? if (User-Name =~ /(a)\\./) -> FALSE Tue Apr 18 12:08:41 2017 : Debug: ++} # policy filter_username = notfound Tue Apr 18 12:08:41 2017 : Debug: ++[preprocess] = ok Tue Apr 18 12:08:41 2017 : Debug: [horizon_log] expand: /var/log/freeradius/radacct/horizon-auth-detail-%Y%m%d -> /var/log/freeradius/radacct/horizon-auth-detail-20170418 Tue Apr 18 12:08:41 2017 : Debug: [horizon_log] /var/log/freeradius/radacct/horizon-auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/horizon-auth-detail-20170418 Tue Apr 18 12:08:41 2017 : Debug: [horizon_log] expand: %t -> Tue Apr 18 12:08:41 2017 Tue Apr 18 12:08:41 2017 : Debug: ++[horizon_log] = ok Tue Apr 18 12:08:41 2017 : Debug: ++[chap] = noop Tue Apr 18 12:08:41 2017 : Debug: ++[mschap] = noop Tue Apr 18 12:08:41 2017 : Debug: [suffix] No '@' in User-Name = "lahil001", looking up realm NULL Tue Apr 18 12:08:41 2017 : Debug: [suffix] Found realm "NULL" Tue Apr 18 12:08:41 2017 : Debug: [suffix] Adding Stripped-User-Name = "lahil001" Tue Apr 18 12:08:41 2017 : Debug: [suffix] Adding Realm = "NULL" Tue Apr 18 12:08:41 2017 : Debug: [suffix] Authentication realm is LOCAL. Tue Apr 18 12:08:41 2017 : Debug: ++[suffix] = ok Tue Apr 18 12:08:41 2017 : Debug: [eap] No EAP-Message, not doing EAP Tue Apr 18 12:08:41 2017 : Debug: ++[eap] = noop Tue Apr 18 12:08:41 2017 : Debug: [horizon_files] users: Matched entry DEFAULT at line 190 Tue Apr 18 12:08:41 2017 : Debug: ++[horizon_files] = ok Tue Apr 18 12:08:41 2017 : Debug: ++[expiration] = noop Tue Apr 18 12:08:41 2017 : Debug: ++[logintime] = noop Tue Apr 18 12:08:41 2017 : Debug: [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. Tue Apr 18 12:08:41 2017 : Debug: ++[pap] = noop Tue Apr 18 12:08:41 2017 : Debug: +} # group authorize = ok Tue Apr 18 12:08:41 2017 : Debug: Found Auth-Type = PAM Tue Apr 18 12:08:41 2017 : Debug: WARNING: Unknown value specified for Auth-Type. Cannot perform requested action. Tue Apr 18 12:08:41 2017 : Debug: # Executing group from file /etc/freeradius/sites-enabled/horizon Tue Apr 18 12:08:41 2017 : Debug: Failed to authenticate the user. Tue Apr 18 12:08:41 2017 : Debug: } # server horizon __ Fachhochschule Dortmund University of Applied Sciences and Arts Dipl.-Ing. (FH) Lars Hillebrand Dez. VI, IT-Basisdienste Sonnenstraße 100 - 44139 Dortmund Raum SON D 008 Tel 0231 9112-253 Fax 0231 9112-338 lars.hillebrand(a)fh-dortmund.de <mailto:lars.hillebrand@fh-dortmund.de> www.fh-dortmund.de <http://www.fh-dortmund.de/>

2 6

Problem with log and PEAP/MS-CHAPv2
by Andrea Gabellini 18 Apr '17

18 Apr '17

Hi, I'm trying to setup a PEAP-MS-CHAPv2 tunnel with FR 3.0.13. It works fine but I have a little problem with the log. When a user logs in correctly I have the usual Login OK. But if the user uses a wrong password or if the username doesn't exist, I don't have any logs of it. Testing the inner tunnel with radtest logs correctly. The configuration of the server and the inner tunnel. Users are on "files" module: server wifi_tim { authorize { filter_username auth_log chap mschap eap { ok = return } wifi_tim_files pap } authenticate { Auth-Type PAP { pap } Auth-Type CHAP { chap } Auth-Type MS-CHAP { mschap } mschap eap } preacct { } accounting { } session { } post-auth { update { &reply: += &session-state: } reply_log remove_reply_message_if_eap Post-Auth-Type REJECT { attr_filter.access_reject eap remove_reply_message_if_eap } Post-Auth-Type Challenge { } } pre-proxy { } post-proxy { } } server wifi_tim_inner_tunnel { listen { ipaddr = 127.0.0.1 port = 11812 type = auth } authorize { filter_username chap mschap eap { ok = return } wifi_tim_files pap } authenticate { Auth-Type PAP { pap } Auth-Type CHAP { chap } Auth-Type MS-CHAP { mschap } mschap eap } session { } post-auth { Post-Auth-Type REJECT { attr_filter.access_reject update outer.session-state { &Module-Failure-Message := &request:Module-Failure-Message } } } pre-proxy { } post-proxy { } } eap { default_eap_type = peap timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = ${max_requests} tls-config tls-common { private_key_password = whatever private_key_file = ${certdir}/server.pem certificate_file = ${certdir}/server.pem ca_file = ${cadir}/ca.pem dh_file = ${certdir}/dh ca_path = ${cadir} cipher_list = "ALL:!LOW:!SSLv2:!EXP:!aNULL" cipher_server_preference = yes ecdh_curve = "prime256v1" cache { enable = no max_entries = 255 } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" } } peap { tls = tls-common default_eap_type = mschapv2 copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "wifi_tim_inner_tunnel" } mschapv2 { send_error = yes identity = "Tism Access Server" } } Logs with radtest: Apr 12 10:47:25 radius31 radiusd[28822]: (1) Login OK: [testuser] (from client localhost port 0) Apr 12 10:47:35 radius31 radiusd[28822]: (2) Login incorrect (mschap: MS-CHAP2-Response is incorrect): [testuser] (from client localhost port 0) Apr 12 10:47:35 radius31 radiusd[28822]: (2) Rejected in post-auth: [testuser] (from client localhost port 0) Apr 12 10:55:02 radius31 radiusd[28822]: (16) Login incorrect (mschap: FAILED: No NT/LM-Password. Cannot perform authentication): [testuserx] (from client localhost port 0) Apr 12 10:55:02 radius31 radiusd[28822]: (16) Rejected in post-auth: [testuserx] (from client localhost port 0) Debug with EAP and wrong password: (162) Wed Apr 12 11:30:39 2017: Debug: Received Access-Request Id 7 from 194.183.95.46:55808 to 194.183.95.46:1812 length 276 (162) Wed Apr 12 11:30:39 2017: Debug: User-Name = "testuser" (162) Wed Apr 12 11:30:39 2017: Debug: Calling-Station-Id = "E8-3A-12-EF-30-CE" (162) Wed Apr 12 11:30:39 2017: Debug: Framed-MTU = 1400 (162) Wed Apr 12 11:30:39 2017: Debug: NAS-Port-Type = Wireless-802.11 (162) Wed Apr 12 11:30:39 2017: Debug: Connect-Info = "rad_eap_test + eapol_test" (162) Wed Apr 12 11:30:39 2017: Debug: NAS-IP-Address = 172.16.0.4 (162) Wed Apr 12 11:30:39 2017: Debug: EAP-Message = 0x02070090190017030100207ca8e68f9cc0712a093735da2c9a7a8f8880c35df3bb05407fc2ca022b33575d1703010060960e2f55b1a94c96a4197759099aaafdcabbaa6c6c0583b1c26e354da196fc30abcab796cdf83f4bc110a14559904b992bdfff46e30d60b9d6548342b5ea2fa87d4fbd3392353b (162) Wed Apr 12 11:30:39 2017: Debug: State = 0xe50e637de3097a45c917c73821ab3033 (162) Wed Apr 12 11:30:39 2017: Debug: Message-Authenticator = 0x79e6229a110fd499293f527c2f93be25 (162) Wed Apr 12 11:30:39 2017: Debug: session-state: No cached attributes (162) Wed Apr 12 11:30:39 2017: Debug: # Executing section authorize from file /usr/local/freeradius/etc/raddb/sites-enabled/wifi_tim (162) Wed Apr 12 11:30:39 2017: Debug: authorize { (162) Wed Apr 12 11:30:39 2017: Debug: policy filter_username { (162) Wed Apr 12 11:30:39 2017: Debug: if (&User-Name) { (162) Wed Apr 12 11:30:39 2017: Debug: if (&User-Name) -> TRUE (162) Wed Apr 12 11:30:39 2017: Debug: if (&User-Name) { (162) Wed Apr 12 11:30:39 2017: Debug: if (&User-Name =~ / /) { (162) Wed Apr 12 11:30:39 2017: Debug: if (&User-Name =~ / /) -> FALSE (162) Wed Apr 12 11:30:39 2017: Debug: if (&User-Name =~ /@[^@]*@/ ) { (162) Wed Apr 12 11:30:39 2017: Debug: if (&User-Name =~ /@[^@]*@/ ) -> FALSE (162) Wed Apr 12 11:30:39 2017: Debug: if (&User-Name =~ /\.\./ ) { (162) Wed Apr 12 11:30:39 2017: Debug: if (&User-Name =~ /\.\./ ) -> FALSE (162) Wed Apr 12 11:30:39 2017: Debug: if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (162) Wed Apr 12 11:30:39 2017: Debug: if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (162) Wed Apr 12 11:30:39 2017: Debug: if (&User-Name =~ /\.$/) { (162) Wed Apr 12 11:30:39 2017: Debug: if (&User-Name =~ /\.$/) -> FALSE (162) Wed Apr 12 11:30:39 2017: Debug: if (&User-Name =~ /(a)\./) { (162) Wed Apr 12 11:30:39 2017: Debug: if (&User-Name =~ /(a)\./) -> FALSE (162) Wed Apr 12 11:30:39 2017: Debug: } # if (&User-Name) = notfound (162) Wed Apr 12 11:30:39 2017: Debug: } # policy filter_username = notfound (162) Wed Apr 12 11:30:39 2017: Debug: auth_log: EXPAND /var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (162) Wed Apr 12 11:30:39 2017: Debug: auth_log: --> /var/log/radius/radacct/194.183.95.46/auth-detail-20170412 (162) Wed Apr 12 11:30:39 2017: Debug: auth_log: /var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /var/log/radius/radacct/194.183.95.46/auth-detail-20170412 (162) Wed Apr 12 11:30:39 2017: Debug: auth_log: EXPAND %t (162) Wed Apr 12 11:30:39 2017: Debug: auth_log: --> Wed Apr 12 11:30:39 2017 (162) Wed Apr 12 11:30:39 2017: Debug: [auth_log] = ok (162) Wed Apr 12 11:30:39 2017: Debug: [chap] = noop (162) Wed Apr 12 11:30:39 2017: Debug: [mschap] = noop (162) Wed Apr 12 11:30:39 2017: Debug: eap: Peer sent EAP Response (code 2) ID 7 length 144 (162) Wed Apr 12 11:30:39 2017: Debug: eap: Continuing tunnel setup (162) Wed Apr 12 11:30:39 2017: Debug: [eap] = ok (162) Wed Apr 12 11:30:39 2017: Debug: } # authorize = ok (162) Wed Apr 12 11:30:39 2017: Debug: Found Auth-Type = eap (162) Wed Apr 12 11:30:39 2017: Debug: # Executing group from file /usr/local/freeradius/etc/raddb/sites-enabled/wifi_tim (162) Wed Apr 12 11:30:39 2017: Debug: authenticate { (162) Wed Apr 12 11:30:39 2017: Debug: eap: Expiring EAP session with state 0xcb16895fcb11935b (162) Wed Apr 12 11:30:39 2017: Debug: eap: Finished EAP session with state 0xe50e637de3097a45 (162) Wed Apr 12 11:30:39 2017: Debug: eap: Previous EAP request found for state 0xe50e637de3097a45, released from the list (162) Wed Apr 12 11:30:39 2017: Debug: eap: Peer sent packet with method EAP PEAP (25) (162) Wed Apr 12 11:30:39 2017: Debug: eap: Calling submodule eap_peap to process data (162) Wed Apr 12 11:30:39 2017: Debug: eap_peap: Continuing EAP-TLS (162) Wed Apr 12 11:30:39 2017: Debug: eap_peap: [eaptls verify] = ok (162) Wed Apr 12 11:30:39 2017: Debug: eap_peap: Done initial handshake (162) Wed Apr 12 11:30:39 2017: Debug: eap_peap: [eaptls process] = ok (162) Wed Apr 12 11:30:39 2017: Debug: eap_peap: Session established. Decoding tunneled attributes (162) Wed Apr 12 11:30:39 2017: Debug: eap_peap: PEAP state phase2 (162) Wed Apr 12 11:30:39 2017: Debug: eap_peap: EAP method MSCHAPv2 (26) (162) Wed Apr 12 11:30:39 2017: Debug: eap_peap: Got tunneled request (162) Wed Apr 12 11:30:39 2017: Debug: eap_peap: EAP-Message = 0x020700431a0207003e31b91e9f531a076d578b11807fa0c5e5570000000000000000c26b0fb3fc605a0e49b6dfc821e07a674b6f65c9e16dd07b007465737475736572 (162) Wed Apr 12 11:30:39 2017: Debug: eap_peap: Setting User-Name to testuser (162) Wed Apr 12 11:30:39 2017: Debug: eap_peap: Sending tunneled request to wifi_tim_inner_tunnel (162) Wed Apr 12 11:30:39 2017: Debug: eap_peap: EAP-Message = 0x020700431a0207003e31b91e9f531a076d578b11807fa0c5e5570000000000000000c26b0fb3fc605a0e49b6dfc821e07a674b6f65c9e16dd07b007465737475736572 (162) Wed Apr 12 11:30:39 2017: Debug: eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (162) Wed Apr 12 11:30:39 2017: Debug: eap_peap: User-Name = "testuser" (162) Wed Apr 12 11:30:39 2017: Debug: eap_peap: State = 0xcb16895fcb11935b1be4d67ff3649f78 (162) Wed Apr 12 11:30:39 2017: Debug: Virtual server wifi_tim_inner_tunnel received request (162) Wed Apr 12 11:30:39 2017: Debug: EAP-Message = 0x020700431a0207003e31b91e9f531a076d578b11807fa0c5e5570000000000000000c26b0fb3fc605a0e49b6dfc821e07a674b6f65c9e16dd07b007465737475736572 (162) Wed Apr 12 11:30:39 2017: Debug: FreeRADIUS-Proxied-To = 127.0.0.1 (162) Wed Apr 12 11:30:39 2017: Debug: User-Name = "testuser" (162) Wed Apr 12 11:30:39 2017: Debug: State = 0xcb16895fcb11935b1be4d67ff3649f78 (162) Wed Apr 12 11:30:39 2017: WARNING: Outer and inner identities are the same. User privacy is compromised. (162) Wed Apr 12 11:30:39 2017: Debug: server wifi_tim_inner_tunnel { (162) Wed Apr 12 11:30:39 2017: Debug: session-state: No cached attributes (162) Wed Apr 12 11:30:39 2017: Debug: # Executing section authorize from file /usr/local/freeradius/etc/raddb/sites-enabled/wifi_tim_inner_tunnel (162) Wed Apr 12 11:30:39 2017: Debug: authorize { (162) Wed Apr 12 11:30:39 2017: Debug: policy filter_username { (162) Wed Apr 12 11:30:39 2017: Debug: if (&User-Name) { (162) Wed Apr 12 11:30:39 2017: Debug: if (&User-Name) -> TRUE (162) Wed Apr 12 11:30:39 2017: Debug: if (&User-Name) { (162) Wed Apr 12 11:30:39 2017: Debug: if (&User-Name =~ / /) { (162) Wed Apr 12 11:30:39 2017: Debug: if (&User-Name =~ / /) -> FALSE (162) Wed Apr 12 11:30:39 2017: Debug: if (&User-Name =~ /@[^@]*@/ ) { (162) Wed Apr 12 11:30:39 2017: Debug: if (&User-Name =~ /@[^@]*@/ ) -> FALSE (162) Wed Apr 12 11:30:39 2017: Debug: if (&User-Name =~ /\.\./ ) { (162) Wed Apr 12 11:30:39 2017: Debug: if (&User-Name =~ /\.\./ ) -> FALSE (162) Wed Apr 12 11:30:39 2017: Debug: if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (162) Wed Apr 12 11:30:39 2017: Debug: if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (162) Wed Apr 12 11:30:39 2017: Debug: if (&User-Name =~ /\.$/) { (162) Wed Apr 12 11:30:39 2017: Debug: if (&User-Name =~ /\.$/) -> FALSE (162) Wed Apr 12 11:30:39 2017: Debug: if (&User-Name =~ /(a)\./) { (162) Wed Apr 12 11:30:39 2017: Debug: if (&User-Name =~ /(a)\./) -> FALSE (162) Wed Apr 12 11:30:39 2017: Debug: } # if (&User-Name) = notfound (162) Wed Apr 12 11:30:39 2017: Debug: } # policy filter_username = notfound (162) Wed Apr 12 11:30:39 2017: Debug: [chap] = noop (162) Wed Apr 12 11:30:39 2017: Debug: [mschap] = noop (162) Wed Apr 12 11:30:39 2017: Debug: eap: Peer sent EAP Response (code 2) ID 7 length 67 (162) Wed Apr 12 11:30:39 2017: Debug: eap: No EAP Start, assuming it's an on-going EAP conversation (162) Wed Apr 12 11:30:39 2017: Debug: [eap] = updated (162) Wed Apr 12 11:30:39 2017: Debug: wifi_tim_files: users: Matched entry testuser at line 13 (162) Wed Apr 12 11:30:39 2017: Debug: [wifi_tim_files] = ok (162) Wed Apr 12 11:30:39 2017: WARNING: pap: Auth-Type already set. Not setting to PAP (162) Wed Apr 12 11:30:39 2017: Debug: [pap] = noop (162) Wed Apr 12 11:30:39 2017: Debug: } # authorize = updated (162) Wed Apr 12 11:30:39 2017: Debug: Found Auth-Type = eap (162) Wed Apr 12 11:30:39 2017: Debug: # Executing group from file /usr/local/freeradius/etc/raddb/sites-enabled/wifi_tim_inner_tunnel (162) Wed Apr 12 11:30:39 2017: Debug: authenticate { (162) Wed Apr 12 11:30:39 2017: Debug: eap: Expiring EAP session with state 0xcb16895fcb11935b (162) Wed Apr 12 11:30:39 2017: Debug: eap: Finished EAP session with state 0xcb16895fcb11935b (162) Wed Apr 12 11:30:39 2017: Debug: eap: Previous EAP request found for state 0xcb16895fcb11935b, released from the list (162) Wed Apr 12 11:30:39 2017: Debug: eap: Peer sent packet with method EAP MSCHAPv2 (26) (162) Wed Apr 12 11:30:39 2017: Debug: eap: Calling submodule eap_mschapv2 to process data (162) Wed Apr 12 11:30:39 2017: Debug: eap_mschapv2: # Executing group from file /usr/local/freeradius/etc/raddb/sites-enabled/wifi_tim_inner_tunnel (162) Wed Apr 12 11:30:39 2017: Debug: eap_mschapv2: authenticate { (162) Wed Apr 12 11:30:39 2017: Debug: mschap: Found Cleartext-Password, hashing to create NT-Password (162) Wed Apr 12 11:30:39 2017: Debug: mschap: Found Cleartext-Password, hashing to create LM-Password (162) Wed Apr 12 11:30:39 2017: Debug: mschap: Creating challenge hash with username: testuser (162) Wed Apr 12 11:30:39 2017: Debug: mschap: Client is using MS-CHAPv2 (162) Wed Apr 12 11:30:39 2017: ERROR: mschap: MS-CHAP2-Response is incorrect (162) Wed Apr 12 11:30:39 2017: Debug: [mschap] = reject (162) Wed Apr 12 11:30:39 2017: Debug: } # authenticate = reject (162) Wed Apr 12 11:30:39 2017: Debug: MSCHAP-Error: E=691 R=1 C=1474492f8f426051613ac0fd4afe37b8 V=3 M=Authentication failed (162) Wed Apr 12 11:30:39 2017: Debug: Found new challenge from MS-CHAP-Error: err=691 retry=1 challenge=1474492f8f426051613ac0fd4afe37b8 (162) Wed Apr 12 11:30:39 2017: ERROR: MSCHAP Failure (162) Wed Apr 12 11:30:39 2017: Debug: eap: Sending EAP Request (code 1) ID 8 length 81 (162) Wed Apr 12 11:30:39 2017: Debug: eap: EAP session adding &reply:State = 0xcb16895fca1e935b (162) Wed Apr 12 11:30:39 2017: Debug: [eap] = handled (162) Wed Apr 12 11:30:39 2017: Debug: } # authenticate = handled (162) Wed Apr 12 11:30:39 2017: Debug: } # server wifi_tim_inner_tunnel (162) Wed Apr 12 11:30:39 2017: Debug: Virtual server sending reply (162) Wed Apr 12 11:30:39 2017: Debug: EAP-Message = 0x010800511a0407004c453d36393120523d3120433d313437343439326638663432363035313631336163306664346166653337623820563d33204d3d41757468656e7469636174696f6e206661696c6564 (162) Wed Apr 12 11:30:39 2017: Debug: Message-Authenticator = 0x00000000000000000000000000000000 (162) Wed Apr 12 11:30:39 2017: Debug: State = 0xcb16895fca1e935b1be4d67ff3649f78 (162) Wed Apr 12 11:30:39 2017: Debug: eap_peap: Got tunneled reply code 11 (162) Wed Apr 12 11:30:39 2017: Debug: eap_peap: EAP-Message = 0x010800511a0407004c453d36393120523d3120433d313437343439326638663432363035313631336163306664346166653337623820563d33204d3d41757468656e7469636174696f6e206661696c6564 (162) Wed Apr 12 11:30:39 2017: Debug: eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (162) Wed Apr 12 11:30:39 2017: Debug: eap_peap: State = 0xcb16895fca1e935b1be4d67ff3649f78 (162) Wed Apr 12 11:30:39 2017: Debug: eap_peap: Got tunneled Access-Challenge (162) Wed Apr 12 11:30:39 2017: Debug: eap: Sending EAP Request (code 1) ID 8 length 123 (162) Wed Apr 12 11:30:39 2017: Debug: eap: EAP session adding &reply:State = 0xe50e637de2067a45 (162) Wed Apr 12 11:30:39 2017: Debug: [eap] = handled (162) Wed Apr 12 11:30:39 2017: Debug: } # authenticate = handled (162) Wed Apr 12 11:30:39 2017: Debug: Using Post-Auth-Type Challenge (162) Wed Apr 12 11:30:39 2017: Debug: # Executing group from file /usr/local/freeradius/etc/raddb/sites-enabled/wifi_tim (162) Wed Apr 12 11:30:39 2017: Debug: Challenge { ... } # empty sub-section is ignored (162) Wed Apr 12 11:30:39 2017: Debug: Sent Access-Challenge Id 7 from 194.183.95.46:1812 to 194.183.95.46:55808 length 0 (162) Wed Apr 12 11:30:39 2017: Debug: EAP-Message = 0x0108007b19001703010070ebc34da12bb045acd32080fe40bc92495c6593a5e40589775105ef0f5c76cffda64ca3039931242118be0db1a39bdd811a876d7bc9e111e9e28ee633e50ceae1b4a66367000e3990c542a0aa3227b3673d58dd69d1b006db31a8859ae1fe63416e1253dec50b6fb4959a4e51 (162) Wed Apr 12 11:30:39 2017: Debug: Message-Authenticator = 0x00000000000000000000000000000000 (162) Wed Apr 12 11:30:39 2017: Debug: State = 0xe50e637de2067a45c917c73821ab3033 (162) Wed Apr 12 11:30:39 2017: Debug: Finished request no more packets are exchanged... Thanks, Andrea -- ---------------------------------------------------------------- Truth hurts... not the searching after but the running from. ---------------------------------------------------------------- Ing. Andrea Gabellini Email: andrea.gabellini(a)telecomitalia.sm Skype: andreagabellini Tel: (+378) 0549 886111 Fax: (+378) 0549 886188 Telecom Italia San Marino S.p.A. Via XXVIII Luglio, 212 - Piano -2 47893 Borgo Maggiore Republic of San Marino http://www.telecomitalia.sm

3 11