- Freeradius-Users - lists.freeradius.org

WPA2 entreprise : Access-Accept but not connected
by Arno Tarpin 12 Jan '17

12 Jan '17

Hi, First I'm sorry for my bad English... I just install Freeradius (using this tutorial <https://blog.fenrir.fr/2013/09/07/655/>), everything work (I get a access-accept when I try the radtest command) but when I try connect to the AP using WPA2 Entreprise, my devise (I use an Iphone but with a Laptop I get the same problem) don't connect. I don't have any error message, and after few try the device "give up" I mean without any error message it just stop. On the Freeradius server when I use the Freeradius -X command I can see the Access-Accept but my device re-try a connection. I have no idea where the problem come from...

3 3

OCSP hash algorithm agility
by Stefan Winter 12 Jan '17

12 Jan '17

Hi, I'm currently implementing an OCSP responder for use with EAP-TLS. I think I found a case of insufficient algorithm agility. Or I'm doing something wrong, hence my mail to the list here -can someone quickly confirm if I'm on the right track? I have a copy of the request FR 3.0.12 sends and the response I send back: [root@snf-734018 ticker]# openssl ocsp -reqin realrequest.der -req_text OCSP Request Data: Version: 1 (0x0) Requestor List: Certificate ID: Hash Algorithm: sha1 Issuer Name Hash: DCEB2C72264239201A4A5DF547C78268A1CB33A2 Issuer Key Hash: BC8DDD42F7B3B458E8ECEE403D21D404CEB9F2D0 Serial Number: 0BA50D497E [root@snf-734018 ticker]# openssl ocsp -respin realresponse.der -resp_text OCSP Response Data: OCSP Response Status: successful (0x0) Response Type: Basic OCSP Response Version: 1 (0x0) Responder Id: O = eduroam, OU = eduroam-as-a-Service, CN = eduroam-as-a-Service Client Auth Issuing CA - Prototype Produced At: Jan 11 08:24:56 2017 GMT Responses: Certificate ID: Hash Algorithm: sha256 Issuer Name Hash: 7A6CC4FC2F34491E91A8764D1F0990FB8FE02FE6FD64713AE4DCE0E731E5B508 Issuer Key Hash: D9CE624ED036FD290E8BDA9A36107D40D37C41DF1BB268741157074D66B3C038 Serial Number: 0BA50D497E Cert Status: good This Update: Jan 11 08:24:56 2017 GMT Next Update: Jan 21 08:24:56 2017 GMT Signature Algorithm: sha256WithRSAEncryption As can be seen, the request is about the same certificate (by serial), and the issuer and key are identical (I verified that out-of-band; it's my own CA and my own response generator. I am sure all is good.). But: FreeRADIUS sends the name and key hashes hashed with SHA1; my resonse does the hashes with SHA256. The result in debug mode is: Wed Jan 11 03:56:13 2017 : Debug: (54) eap_tls: Starting OCSP Request Wed Jan 11 03:56:13 2017 : Debug: (54) eap_tls: ocsp: Using responder URL "http://ocsp-test.hosted.eduroam.org:80/ticker/" Wed Jan 11 03:56:13 2017 : ERROR: (54) eap_tls: ocsp: No Status found Wed Jan 11 03:56:13 2017 : ERROR: (54) eap_tls: ocsp: Certificate has been expired/revoked The Status sits right there in the response: "Cert Status: good" but for some reason FR won't accept it. I believe it would be easy to fix this; calculate the name and key hashes for both algos and check if the response matches any one of those. I thought I could slap you with RFC6960's section 4.3: "Clients that request OCSP services SHALL be capable of processing responses signed using RSA with SHA-256 (identified by the sha256WithRSAEncryption OID specified in [RFC4055]). " but that one only pertains to the signature hash algorithm of the full response (which is sha256, and which does not seem to be the issue here). So, is all that correct? For the moment I will generate responses with SHA1 name and key hashes. But it feels like a step in the wrong direction. Greetings, Stefan Winter -- Stefan WINTER Ingenieur de Recherche Fondation RESTENA - Réseau Téléinformatique de l'Education Nationale et de la Recherche 2, avenue de l'Université L-4365 Esch-sur-Alzette Tel: +352 424409 1 Fax: +352 422473 PGP key updated to 4096 Bit RSA - I will encrypt all mails if the recipient's key is known to me http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xC0DE6A358A39DC66

3 4

Huawei AC6005-8 WLAN V200R006C10SPC200
by Prof. Michele GHERLONE 12 Jan '17

12 Jan '17

Hi all. I have recently installed a WIFI lan in my department with 31 AP Huawei AP5130DN that communicate through a VLAN with the AC mentioned in the subject. I was wondering if anyone has got experience in setting up and configuring such an environment with freeradius. The AP are connected to six HP S3600 switches that send traffic to an aggregation switch to which the AC is connected through one of its Gigabitethernet interfaces. The AC has been setup to do 802.1x PEAP authentication through one FR server. root@bigserver:~# radiusd -v radiusd: FreeRADIUS Version 3.0.12, for host i686-pc-linux-gnu, built on Dec 13 2016 at 01:58:57 FreeRADIUS Version 3.0.12 Copyright (C) 1999-2016 The FreeRADIUS server project and contributors The AC has 2 VLANs: 1 e 300 (same as all the aforementioned switches). All relevant Gigabitethernet interfaces both on the switches and on AC are link-type HYBRID with tagged VLAN 300 and untagged VLAN 1. VLAN 300 is the management VLAN and all APs communicate with the AC through CAPWAP protocol on VLAN 300. VLAN 1 is the service VLAN and has layer 3 VLANIF 1 with IP 192.168.2.43 VLANIF has also ACL2000 with NAT rule 5: permit source 172.32.1.0 0.0.0.255 172.32.1.0 is the layer 3 ip address of VLAN 300 (AC is 172.32.1.1 on the inbound interface). AC and FR ping with no problems each other (192.168.2.43 <-> 192.168.2.1). Freeradius is configured to listen to 192.168.2.1 on standard UDP port 1812 and 1813. 192.168.2.1 is also the ETH0 interface ip address of the linux server it was configured on. AC is also configured for accounting through FR. Everything is working fine, meaning that FR *IS* capable of doing PEAP with sql, accounting and simultaneous-use properly configured. The only persistent problem are traffic bottlenecks between the FR and the AC. Very rarely the packets for completing the PEAP whole auth cycle are exchanged subsequently; more often the AC stops sending packets after the first or second Access-Challenge is sent by FR. In a very low traffic scenario the situation happens less frequently and authentications succeed almost normally. As soon as users number increases the UDP traffic slows down and users experience unacceptable authentication delays. The VAP forward mode is tunnel and NOT direct Forward mode. I do not attach here radiusd -X output because the problem IS NOT in FR configuration: like I said, PEAP authentication between AC and FR CAN succeed. Of course I am more than willing to do it if I'll be asked to do so. My problem is something hindering the UDP packet flow communication between 192.168.2.1 (freeradius) and 192.168.2.43 (AC). I am writing to the list in the hope that someone has already dealt with same equipment and possibly run into the same problem. Any help and/or attention to my situation would be highly appreciated. How could I for example debug the traffic flow regarding AAA on the AC? Am I facing some trivial timeout issues or what is actually causing this hindrance? Is EAPOL taking place in the CAPWAP tunnel if the VAP is configured to do tunnel forwarding mode? What do I have to configure in order to establish some traffic priority for the communication between AC and FR (both EAPOL and UDP traffic)? I've been struggling with this issue for almost 1 month now, and I really am in desperate need of someone familiar with my operating environment. Thanks for your time and attention. MacGherl60

2 1

Re: FreeRADIUS KPI Counter
by chenjiang 11 Jan '17

11 Jan '17

HI! I find status server information page in FR WIKI：https://wiki.freeradius.org/config/Status.it’s just what I wanted. so thanks for your information. BR! Chen Jiang Microshield Technology Co., Ltd 北京市海淀区西三环北路50号豪柏大厦C2座18-19层100048 (86)10-88518768 (86)18612696123 原始邮件发件人:chenjiangchenjiang@microshield.com.cn 收件人:FreeRadius users mailing listfreeradius-users(a)lists.freeradius.org; msms(a)sys4.de 发送时间:2017年1月11日(周三) 12:26 主题:Re: FreeRADIUS KPI Counter Hi! Michael Thanks for your information, is there any documents about the FR status server? Thanks again. BR! Chen Jiang Microshield Technology Co., Ltd 北京市海淀区西三环北路50号豪柏大厦C2座18-19层100048 (86)10-88518768 (86)18612696123 原始邮件发件人:Michael Schwartzkopffms(a)sys4.de 收件人:FreeRadius users mailing listfreeradius-users(a)lists.freeradius.org 发送时间:2017年1月11日(周三) 00:04 主题:Re: FreeRADIUS KPI Counter - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

1 0

Re: FreeRADIUS KPI Counter
by chenjiang 11 Jan '17

11 Jan '17

HI! I find status server information page in FR WIKI：https://wiki.freeradius.org/config/Status. it’s just what I wanted. so thanks in advance. BR! Chen Jiang Microshield Technology Co., Ltd 北京市海淀区西三环北路50号豪柏大厦C2座18-19层100048 (86)10-88518768 (86)18612696123 原始邮件发件人:chenjiangchenjiang@microshield.com.cn 收件人:FreeRadius users mailing listfreeradius-users(a)lists.freeradius.org; aland(a)deployingradius.com 发送时间:2017年1月11日(周三) 12:27 主题:Re: FreeRADIUS KPI Counter Hi! Alan got it and thanks, is there any document about this? BR! Chen Jiang Microshield Technology Co., Ltd 北京市海淀区西三环北路50号豪柏大厦C2座18-19层100048 (86)10-88518768 (86)18612696123 原始邮件发件人:Alan DeKokaland(a)deployingradius.com 收件人:FreeRadius users mailing listfreeradius-users(a)lists.freeradius.org 发送时间:2017年1月11日(周三) 00:04 主题:Re: FreeRADIUS KPI Counter On Jan 10, 2017, at 11:09 AM, chenjiang chenjiang(a)microshield.com.cn wrote: Hi！Alan Thanks for the information, Do you mean FreeRADIUS does support RFC2619“RADIUS Authentication Server MIB”? it will be great. I said: FreeRADIUS provides the RFCs MIB counters That should be clear enough to answer your question. Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

1 0

SEGV with FR 3.0.12 HEAD (with libtr 1.5.1-2)
by Stefan Paetow 11 Jan '17

11 Jan '17

Hi Alan, Arran, There seems to be an interaction issue with a trustrouter-enabled build of 3.0.12 HEAD. I've attached a GDB output. -bash-4.1$ gdb GNU gdb (GDB) Red Hat Enterprise Linux (7.2-90.el6) Copyright (C) 2010 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "x86_64-redhat-linux-gnu". For bug reporting instructions, please see: <http://www.gnu.org/software/gdb/bugs/>. (gdb) file /usr/sbin/radiusd Reading symbols from /usr/sbin/radiusd...Reading symbols from /usr/lib/debug/usr/sbin/radiusd.debug...done. done. (gdb) set args -fxx -l stdout (gdb) run Starting program: /usr/sbin/radiusd -fxx -l stdout [Thread debugging using libthread_db enabled] FreeRADIUS Version 3.0.13 Copyright (C) 1999-2016 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Detaching after fork from child process 5308. Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/raddb/dictionary including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/mods-enabled/ including configuration file /etc/raddb/mods-enabled/expiration including configuration file /etc/raddb/mods-enabled/echo including configuration file /etc/raddb/mods-enabled/exec including configuration file /etc/raddb/mods-enabled/always including configuration file /etc/raddb/mods-enabled/sradutmp including configuration file /etc/raddb/mods-enabled/attr_filter including configuration file /etc/raddb/mods-enabled/utf8 including configuration file /etc/raddb/mods-enabled/digest including configuration file /etc/raddb/mods-enabled/unpack including configuration file /etc/raddb/mods-enabled/dynamic_clients including configuration file /etc/raddb/mods-enabled/logintime including configuration file /etc/raddb/mods-enabled/preprocess including configuration file /etc/raddb/mods-enabled/pap including configuration file /etc/raddb/mods-enabled/soh including configuration file /etc/raddb/mods-enabled/chap including configuration file /etc/raddb/mods-enabled/dhcp including configuration file /etc/raddb/mods-enabled/linelog including configuration file /etc/raddb/mods-enabled/expr including configuration file /etc/raddb/mods-enabled/radutmp including configuration file /etc/raddb/mods-enabled/date including configuration file /etc/raddb/mods-enabled/ntlm_auth including configuration file /etc/raddb/mods-enabled/mschap including configuration file /etc/raddb/mods-enabled/realm including configuration file /etc/raddb/mods-enabled/passwd including configuration file /etc/raddb/mods-enabled/abfab_psk_sql including configuration file /etc/raddb/mods-enabled/eap including configuration file /etc/raddb/mods-enabled/detail.log including configuration file /etc/raddb/mods-enabled/detail including configuration file /etc/raddb/mods-enabled/unix including configuration file /etc/raddb/mods-enabled/replicate including configuration file /etc/raddb/mods-enabled/files including configuration file /etc/raddb/mods-enabled/cache_eap including files in directory /etc/raddb/policy.d/ including configuration file /etc/raddb/policy.d/filter including configuration file /etc/raddb/policy.d/accounting including configuration file /etc/raddb/policy.d/cui including configuration file /etc/raddb/policy.d/dhcp including configuration file /etc/raddb/policy.d/control including configuration file /etc/raddb/policy.d/moonshot-targeted-ids including configuration file /etc/raddb/policy.d/abfab-tr including configuration file /etc/raddb/policy.d/canonicalization including configuration file /etc/raddb/policy.d/eap including configuration file /etc/raddb/policy.d/debug including configuration file /etc/raddb/policy.d/operator-name including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/abfab-tr-idp including configuration file /etc/raddb/sites-enabled/channel_bindings including configuration file /etc/raddb/sites-enabled/inner-tunnel including configuration file /etc/raddb/sites-enabled/abfab-tls main { name = "radiusd" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" libdir = "/usr/lib64/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes allow_vulnerable_openssl = "yes" } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dynamic = yes dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } realm main-idp65x64.localdomain { } realm LOCAL { } home_server_pool my_auth_failover { type = fail-over home_server = localhost } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Found debugger attached # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_expiration # Loading module "expiration" from file /etc/raddb/mods-enabled/expiration # Loaded module rlm_exec # Loading module "echo" from file /etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loading module "exec" from file /etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_always # Loading module "reject" from file /etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_radutmp # Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/raddb/mods-enabled/utf8 # Loaded module rlm_digest # Loading module "digest" from file /etc/raddb/mods-enabled/digest # Loaded module rlm_unpack # Loading module "unpack" from file /etc/raddb/mods-enabled/unpack # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_logintime # Loading module "logintime" from file /etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups" hints = "/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_pap # Loading module "pap" from file /etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_soh # Loading module "soh" from file /etc/raddb/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_chap # Loading module "chap" from file /etc/raddb/mods-enabled/chap # Loaded module rlm_dhcp # Loading module "dhcp" from file /etc/raddb/mods-enabled/dhcp # Loaded module rlm_linelog # Loading module "linelog" from file /etc/raddb/mods-enabled/linelog linelog { filename = "/var/log/radius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/var/log/radius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_expr # Loading module "expr" from file /etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_date # Loading module "date" from file /etc/raddb/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" } # Loading module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no default_community = "none" rp_realm = "none" trust_router = "none" tr_port = 0 } # Loading module "suffix" from file /etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no default_community = "trapc65x64.localdomain" rp_realm = "main-idp65x64.localdomain" trust_router = "maintr65x64.localdomain" tr_port = 12309 } # Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no default_community = "none" rp_realm = "none" trust_router = "none" tr_port = 0 } # Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no default_community = "none" rp_realm = "none" trust_router = "none" tr_port = 0 } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_sql # Loading module "psksql" from file /etc/raddb/mods-enabled/abfab_psk_sql sql psksql { driver = "rlm_sql_sqlite" server = "" port = 0 login = "" password = <<< secret >>> radius_db = "radius" read_groups = yes read_profiles = yes read_clients = no delete_stale_sessions = yes sql_user_name = "" default_user_profile = "" client_query = "SELECT id,nasname,shortname,type,secret FROM nas" safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" accounting { reference = ".query" type { accounting-on { } accounting-off { } start { } interim-update { } stop { } } } post-auth { reference = ".query" } } rlm_sql (psksql): Driver rlm_sql_sqlite (module rlm_sql_sqlite) loaded and linked # Loaded module rlm_eap # Loading module "eap" from file /etc/raddb/mods-enabled/eap eap { default_eap_type = "ttls" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 1024 } # Loaded module rlm_detail # Loading module "auth_log" from file /etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "detail" from file /etc/raddb/mods-enabled/detail detail { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_unix # Loading module "unix" from file /etc/raddb/mods-enabled/unix unix { radwtmp = "/var/log/radius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_replicate # Loading module "replicate" from file /etc/raddb/mods-enabled/replicate # Loaded module rlm_files # Loading module "files" from file /etc/raddb/mods-enabled/files files { filename = "/etc/raddb/mods-config/files/authorize" acctusersfile = "/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy" } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } instantiate { } # Instantiating module "expiration" from file /etc/raddb/mods-enabled/expiration # Instantiating module "reject" from file /etc/raddb/mods-enabled/always # Instantiating module "fail" from file /etc/raddb/mods-enabled/always # Instantiating module "ok" from file /etc/raddb/mods-enabled/always # Instantiating module "handled" from file /etc/raddb/mods-enabled/always # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always # Instantiating module "noop" from file /etc/raddb/mods-enabled/always # Instantiating module "updated" from file /etc/raddb/mods-enabled/always # Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject [/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response # Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime # Instantiating module "preprocess" from file /etc/raddb/mods-enabled/preprocess reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /etc/raddb/mods-config/preprocess/hints # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm Warning: dh_check failed with 8 : the g value is not a generator # Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm # Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "psksql" from file /etc/raddb/mods-enabled/abfab_psk_sql rlm_sql_sqlite: libsqlite version: 3.6.20 sqlite { filename = "/var/lib/trust_router/keys" busy_timeout = 200 } rlm_sql (psksql): Attempting to connect to database "radius" rlm_sql (psksql): Initialising connection pool pool { start = 5 min = 5 max = 10 spare = 3 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 1 spread = no } rlm_sql (psksql): Opening additional connection (0), 1 of 10 pending slots used rlm_sql_sqlite: Opening SQLite database "/var/lib/trust_router/keys" rlm_sql (psksql): Opening additional connection (1), 1 of 9 pending slots used rlm_sql_sqlite: Opening SQLite database "/var/lib/trust_router/keys" rlm_sql (psksql): Opening additional connection (2), 1 of 8 pending slots used rlm_sql_sqlite: Opening SQLite database "/var/lib/trust_router/keys" rlm_sql (psksql): Opening additional connection (3), 1 of 7 pending slots used rlm_sql_sqlite: Opening SQLite database "/var/lib/trust_router/keys" rlm_sql (psksql): Opening additional connection (4), 1 of 6 pending slots used rlm_sql_sqlite: Opening SQLite database "/var/lib/trust_router/keys" # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/raddb/certs" pem_file_type = yes private_key_file = "/etc/raddb/certs/server.pem" certificate_file = "/etc/raddb/certs/server.pem" ca_file = "/etc/raddb/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/raddb/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" ecdh_curve = "prime256v1" cache { enable = yes lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail # Instantiating module "files" from file /etc/raddb/mods-enabled/files reading pairlist file /etc/raddb/mods-config/files/authorize reading pairlist file /etc/raddb/mods-config/files/accounting reading pairlist file /etc/raddb/mods-config/files/pre-proxy # Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/raddb/radiusd.conf } # server server default { # from file /etc/raddb/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default server abfab-idp { # from file /etc/raddb/sites-enabled/abfab-tr-idp # Loading authenticate {...} # Loading authorize {...} # Loading post-proxy {...} # Loading post-auth {...} } # server abfab-idp server channel_bindings { # from file /etc/raddb/sites-enabled/channel_bindings # Loading authorize {...} } # server channel_bindings server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/raddb/sites-enabled/inner-tunnel:330 } # server inner-tunnel thread pool { start_servers = 5 max_servers = 32 min_spare_servers = 3 max_spare_servers = 10 max_requests_per_server = 0 cleanup_delay = 5 max_queue_size = 65536 auto_limit_acct = no } [New Thread 0x7ffff231e700 (LWP 5309)] Thread spawned new child 1. Total threads in pool: 1 Thread 1 waiting to be assigned a request [New Thread 0x7ffff191d700 (LWP 5310)] Thread spawned new child 2. Total threads in pool: 2 Thread 2 waiting to be assigned a request [New Thread 0x7ffff0f1c700 (LWP 5311)] Thread spawned new child 3. Total threads in pool: 3 Thread 3 waiting to be assigned a request [New Thread 0x7ffff051b700 (LWP 5312)] Thread spawned new child 4. Total threads in pool: 4 Thread 4 waiting to be assigned a request [New Thread 0x7fffefb1a700 (LWP 5313)] Thread spawned new child 5. Total threads in pool: 5 Thread pool initialized radiusd: #### Opening IP addresses and Ports #### Thread 5 waiting to be assigned a request listen { type = "auth" virtual_server = "abfab-idp" ipaddr = * port = 2083 proto = "tcp" tls { verify_depth = 0 ca_path = "/etc/raddb/certs" pem_file_type = yes private_key_file = "/etc/raddb/certs/server.key" certificate_file = "/etc/raddb/certs/server.pem" ca_file = "/etc/raddb/certs/ca.pem" private_key_password = <<< secret >>> psk_query = "%{psksql:select hex(key) from psk_keys where keyid = '%{TLS-PSK-Identity}'}" dh_file = "/etc/raddb/certs/dh" fragment_size = 8192 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" require_client_cert = yes ecdh_curve = "prime256v1" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = no use_nonce = yes timeout = 0 softfail = no } } clients = "radsec-abfab" client default { ipaddr = 0.0.0.0/0 require_message_authenticator = no proto = "tls" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } } listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth proto tcp address * port 2083 (TLS) bound to server abfab-idp Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on proxy address * port 52936 Listening on proxy address :: port 41170 Ready to process requests ... new connection request on TCP socket Listening on auth from client (127.0.0.1, 49630) -> (*, 2083, virtual-server=abfab-idp) Waking up in 0.7 seconds. (0) Initiating new EAP-TLS session (0) Setting verify mode to require certificate from client (0) (other): before/accept initialization (0) TLS_accept: before/accept initialization (0) <<< recv TLS 1.0 Handshake [length 0096], ClientHello (0) TLS_accept: SSLv3 read client hello A (0) >>> send TLS 1.0 Handshake [length 003e], ServerHello (0) TLS_accept: SSLv3 write server hello A (0) >>> send TLS 1.0 Handshake [length 094e], Certificate (0) TLS_accept: SSLv3 write certificate A (0) >>> send TLS 1.0 Handshake [length 014b], ServerKeyExchange (0) TLS_accept: SSLv3 write key exchange A (0) >>> send TLS 1.0 Handshake [length 00bf], CertificateRequest (0) TLS_accept: SSLv3 write certificate request A (0) TLS_accept: SSLv3 flush data (0) TLS_accept: Need to read more data: SSLv3 read client certificate A (0) TLS_accept: Need to read more data: SSLv3 read client certificate A (0) In SSL Handshake Phase (0) In SSL Accept mode Waking up in 0.7 seconds. (0) <<< recv TLS 1.0 Handshake [length 0949], Certificate (0) Creating attributes from certificate OIDs (0) Creating attributes from certificate OIDs (0) TLS-Client-Cert-X509v3-Extended-Key-Usage += "TLS Web Client Authentication" (0) TLS_accept: SSLv3 read client certificate A (0) <<< recv TLS 1.0 Handshake [length 0046], ClientKeyExchange (0) TLS_accept: SSLv3 read client key exchange A (0) <<< recv TLS 1.0 Handshake [length 0106], CertificateVerify (0) TLS_accept: SSLv3 read certificate verify A (0) <<< recv TLS 1.0 ChangeCipherSpec [length 0001] (0) <<< recv TLS 1.0 Handshake [length 0010], Finished (0) TLS_accept: SSLv3 read finished A (0) >>> send TLS 1.0 ChangeCipherSpec [length 0001] (0) TLS_accept: SSLv3 write change cipher spec A (0) >>> send TLS 1.0 Handshake [length 0010], Finished (0) TLS_accept: SSLv3 write finished A (0) TLS_accept: SSLv3 flush data (0) (other): SSL negotiation finished successfully (0) SSL Connection Established Waking up in 0.6 seconds. (0) Application data status 7 (0) tls_recv: Access-Request packet from host 127.0.0.1 port 49630, id=0, length=135 Threads: total/active/spare threads = 5/0/5 Waking up in 0.3 seconds. Thread 5 got semaphore Thread 5 handling request 0, (1 handled so far) (0) Received Access-Request Id 0 from 127.0.0.1:49630 to 0.0.0.0:2083 length 135 (0) User-Name = "@trapc65x64.localdomain" (0) GSS-Acceptor-Service-Name = "trustidentity" (0) GSS-Acceptor-Host-Name = "main-idp65x64.localdomain" (0) EAP-Message = 0x0200001c0140747261706336357836342e6c6f63616c646f6d61696e (0) Message-Authenticator = 0xa8ac9eac61fe7a9db453177f92034d9a (0) # Executing section authorize from file /etc/raddb/sites-enabled/abfab-tr-idp (0) authorize { (0) policy psk_authorize { (0) if (&TLS-PSK-Identity) { (0) if (&TLS-PSK-Identity) -> FALSE (0) } # policy psk_authorize = notfound (0) policy abfab_client_check { (0) if ("%{client:gss_acceptor_host_name}" && &gss-acceptor-host-name) { (0) EXPAND %{client:gss_acceptor_host_name} (0) --> (0) if ("%{client:gss_acceptor_host_name}" && &gss-acceptor-host-name) -> FALSE (0) if ("%{client:trust_router_coi}") { (0) EXPAND %{client:trust_router_coi} (0) --> trapc65x64.localdomain (0) if ("%{client:trust_router_coi}") -> TRUE (0) if ("%{client:trust_router_coi}") { (0) update request { (0) EXPAND %{client:trust_router_coi} (0) --> trapc65x64.localdomain (0) Trust-Router-COI := trapc65x64.localdomain (0) } # update request = noop (0) } # if ("%{client:trust_router_coi}") = noop (0) if ("%{client:gss_acceptor_realm_name}") { (0) EXPAND %{client:gss_acceptor_realm_name} (0) --> main-idp65x64.localdomain (0) if ("%{client:gss_acceptor_realm_name}") -> TRUE (0) if ("%{client:gss_acceptor_realm_name}") { (0) update request { (0) EXPAND %{client:gss_acceptor_realm_name} (0) --> main-idp65x64.localdomain (0) GSS-Acceptor-Realm-Name := main-idp65x64.localdomain (0) } # update request = noop (0) } # if ("%{client:gss_acceptor_realm_name}") = noop (0) } # policy abfab_client_check = noop (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = noop (0) } # policy filter_username = noop (0) [preprocess] = ok (0) suffix: Checking for suffix after "@" (0) suffix: Looking up realm "trapc65x64.localdomain" for User-Name = "@trapc65x64.localdomain" Opening TIDC connection to maintr65x64.localdomain:12309 Waking up in 0.3 seconds. Waking up in 0.1 seconds. Waking up in 0.7 seconds. Waking up in 1.1 seconds. Waking up in 1.6 seconds. Waking up in 2.5 seconds. Waking up in 3.7 seconds. Program received signal SIGSEGV, Segmentation fault. [Switching to Thread 0x7fffefb1a700 (LWP 5313)] gsscon_connect (inHost=0x8fd5d0 "maintr65x64.localdomain", inPort=12309, inServiceName=0x38af008fcc "trustidentity", outFD=0x7fffefb1895c, outGSSContext=0x7fffefb18998) at gsscon_active.c:92 92 saddr.sin_family = hp->h_addrtype; Or is this in the TR library itself? I've raised this on the Moonshot Dev list as a precaution. With Regards Stefan Paetow Moonshot Industry & Research Liaison Coordinator t: +44 (0)1235 822 125 gpg: 0x3FCE5142 xmpp: stefanp(a)jabber.dev.ja.net skype: stefan.paetow.janet jisc.ac.uk Jisc is a registered charity (number 1149740) and a company limited by guarantee which is registered in England under Company No. 5747339, VAT No. GB 197 0632 86. Jisc’s registered office is: One Castlepark, Tower Hill, Bristol, BS2 0JA. T 0203 697 5800.

2 2

Re: FreeRADIUS KPI Counter
by chenjiang 11 Jan '17

11 Jan '17

Hi! Alan got it and thanks, is there any document about this? BR! Chen Jiang Microshield Technology Co., Ltd 北京市海淀区西三环北路50号豪柏大厦C2座18-19层100048 (86)10-88518768 (86)18612696123 原始邮件发件人:Alan DeKokaland(a)deployingradius.com 收件人:FreeRadius users mailing listfreeradius-users(a)lists.freeradius.org 发送时间:2017年1月11日(周三) 00:04 主题:Re: FreeRADIUS KPI Counter On Jan 10, 2017, at 11:09 AM, chenjiang chenjiang(a)microshield.com.cn wrote: Hi！Alan Thanks for the information, Do you mean FreeRADIUS does support RFC2619“RADIUS Authentication Server MIB”? it will be great. I said: FreeRADIUS provides the RFCs MIB counters That should be clear enough to answer your question. Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

1 0

Re: FreeRADIUS KPI Counter
by chenjiang 11 Jan '17

11 Jan '17

Hi! Michael Thanks for your information, is there any documents about the FR status server? Thanks again. BR! Chen Jiang Microshield Technology Co., Ltd 北京市海淀区西三环北路50号豪柏大厦C2座18-19层100048 (86)10-88518768 (86)18612696123 原始邮件发件人:Michael Schwartzkopffms(a)sys4.de 收件人:FreeRadius users mailing listfreeradius-users(a)lists.freeradius.org 发送时间:2017年1月11日(周三) 00:04 主题:Re: FreeRADIUS KPI Counter - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

1 0

Cisco Anyconnect 2FA
by Stefan Schlesinger 10 Jan '17

10 Jan '17

Hi, we are trying to implement 2FA for Cisco ASA Anyconnect VPN clients. The ASA supports a “secondary password” input, so the dialog asks for a username, a password and another password. The ASA is going to fire off an Access-Request for each of the passwords. The first one with the users password and if successful, a subsequent request, which should contain the one time authentication token. We couldn’t figure out yet how to authenticate the subsequent request against a different authentication module, especially because they both look the same, besides the Request Id. Can anyone help out how to handle the latter different from the first request in an unlang config? Thanks for your help! Stefan rad_recv: Access-Request packet from host 10.30.9.1 port 8272, id=66, length=611 User-Name = "admin" User-Password = “supersecret" NAS-Port = 491520 Called-Station-Id = "1.2.3.4" Calling-Station-Id = "2.3.4.5" NAS-Port-Type = Virtual Tunnel-Client-Endpoint:0 = "2.3.4.5" Cisco-AVPair = "mdm-tlv=device-platform=mac-intel" Cisco-AVPair = "mdm-tlv=device-type=MacBookPro11,1" Cisco-AVPair = "mdm-tlv=device-mac=aa-aa-aa-aa-aa-aa" Cisco-AVPair = "mdm-tlv=device-mac=bb-bb-bb-bb-bb-bb" Cisco-AVPair = "mdm-tlv=device-platform-version=10.11.6" Cisco-AVPair = "mdm-tlv=ac-user-agent=AnyConnect" Cisco-AVPair = "mdm-tlv=device-uid=AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA" NAS-IP-Address = 10.30.9.1 Cisco-AVPair = "audit-session-id=c0a800000000000000000000" Cisco-AVPair = "ip:source-ip=2.3.4.5" Vendor-3076-Attr-146 = 0x43454e5452414c Vendor-3076-Attr-150 = 0x00000002 Cisco-AVPair = "coa-push=true" rad_recv: Access-Request packet from host 10.30.9.1 port 8272, id=67, length=611 User-Name = "admin" User-Password = “2fa-otp-token" NAS-Port = 491520 Called-Station-Id = "1.2.3.4" Calling-Station-Id = "2.3.4.5" NAS-Port-Type = Virtual Tunnel-Client-Endpoint:0 = "2.3.4.5" Cisco-AVPair = "mdm-tlv=device-platform=mac-intel" Cisco-AVPair = "mdm-tlv=device-type=MacBookPro11,1" Cisco-AVPair = "mdm-tlv=device-mac=aa-aa-aa-aa-aa-aa" Cisco-AVPair = "mdm-tlv=device-mac=bb-bb-bb-bb-bb-bb" Cisco-AVPair = "mdm-tlv=device-platform-version=10.11.6" Cisco-AVPair = "mdm-tlv=ac-user-agent=AnyConnect" Cisco-AVPair = "mdm-tlv=device-uid=AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA" NAS-IP-Address = 10.30.9.1 Cisco-AVPair = "audit-session-id=c0a800000000000000000000" Cisco-AVPair = "ip:source-ip=2.3.4.5" Vendor-3076-Attr-146 = 0x43454e5452414c Vendor-3076-Attr-150 = 0x00000002 Cisco-AVPair = "coa-push=true"

3 7

Permission Denied buffered Sql
by Arnab Roy 10 Jan '17

10 Jan '17

Hi All, I just enabled buffered sql on my server everything seems to be working but I am getting flooded with messages as such and I dont think accounting events are being picked up. FR 3.0.11 Failed opening detail file /var/log/radius/radacct/detail.work: Permission denied detail (/var/log/radius/radacct/detail*): Detail listener state unopened waiting 0.790671 sec I have tried all sorts of permissions on the /var/log/radius folder , it seems like as soon as the detail file is created by FR the errors starts appearing The permissions are as follows: [root@radius radius]# ls -l /var/log/radius/radacct total 8 --wxr----t 1 radiusd radiusd 1605 Jan 10 17:59 detail-20170110 --wxr----t 1 radiusd radiusd 1710 Jan 10 17:56 detail.work Any pointers would be greatly appreciated. Many Thanks Arnab

2 5