- Freeradius-Users - lists.freeradius.org

Cached attributes
by Jonathan Gazeley 25 Feb '16

25 Feb '16

We're still struggling with an ongoing problem to get the caching behaviour we want with FreeRADIUS 3.1.x. With a resumed session, we want to know the User-Name from the inner tunnel. What's the recommended way to do this? With the config we're running (based on the sample config files in the 3.1.x branch in git to enable the tls-cache server) and various calls to stuff attributes in session-state, the session-state can't be grabbed back in the outer post-auth, which is where the decision about user VLAN is made. In packet 13 you can see the inner User-Name is undefined. Any help figuring out our probably-simple mistake would be greatly appreciated. Full debug including server startup and two authentications - the first not resumed, the second is resumed: http://pastebin.com/Ey0PAVBY Sorry about the pastebin - I know that this debug log will be too big to be accepted by the mailing list server. Thanks, Jonathan

6 24

FreeRADIUS with Cassandra
by Paul Devins 25 Feb '16

25 Feb '16

We are trying to get FreeRADIUS 3.1 (On Ubuntu 14.04) working with a Cassandra backend but keep encountering the issue below. We have installed the Cassandra CPP driver as advised by a previous thread. "/usr/local/etc/raddb/mods-enabled/sql_cassandra[9]: Failed to link to module "rlm_cassandra": /usr/local/lib/rlm_cassandra.so: cannot open shared object file: No such file or directory : rlm_cassandra.so: cannot open shared object file: No such file or directory" Even if we manually link to or create the library file required we get unknown symbol error. Has anyone had this running with Cassandra successfully and if so any installation advice would be appreciated.

4 3

radwtmp doesn't exist
by Michael Martinez 25 Feb '16

25 Feb '16

Hi, I installed 3.0.11 from source and it works fine, but the radwtmp file does not exist and I'm not sure why. * the unix module is uncommented in the accounting section of the default virtual server * the debug output shows that the module is being loaded when the server starts: # Loading module "unix" from file /usr/local/freeradius/etc/raddb/mods-enabled/unix unix { radwtmp = "/usr/local/freeradius/var/log/radius/radwtmp" } But: root@stand-2-rpi:/usr/local/freeradius/etc/raddb# radlast last: /usr/local/freeradius/var/log/radius/radwtmp: No such file or directory It's not critical or urgent, but just wondering why this file isn't being created. -- --- Michael Martinez http://www.michael--martinez.com

4 9

Re: upgrade freeradius vom 2.1.12 to 3.0.x
by Peter Hutchison 25 Feb '16

25 Feb '16

You can use the unofficial Freeradius 3.x package repository for Freeradius 3 packages. Add the PPA site to /etc/apt/sources.list file so you can use apt-get etc. https://launchpad.net/~freeradius/+archive/ubuntu/stable-3.0 Peter Hutchison University of Huddersfield inspiring tomorrow's professionals. [http://marketing.hud.ac.uk/_HOSTED/EmailSig2014/EmailSigFooter.jpg] This transmission is confidential and may be legally privileged. If you receive it in error, please notify us immediately by e-mail and remove it from your system. If the content of this e-mail does not relate to the business of the University of Huddersfield, then we do not endorse it and will accept no liability.

6 12

iPad PEAP MSCHAPv2
by Óscar Remírez de Ganuza Satrústegui 25 Feb '16

25 Feb '16

Good afternoon, As I told on a previous email, we are migrating previous radius (2.1.9) authentication to a new instance of freeradius (3.0.10). I am experiencing some problems authenticating some devices. I have previously tested with eapol_test that the new freeradius is working ok with both: - EAP TTLS - PAP - PEAP - MSCHAPv2 But when testing PEAP on some devices, it is not working properly. It looks I am getting authorized properly, and even authenticated: (11) [mschap] = ok (11) } # Auth-Type MS-CHAP = ok (11) MSCHAP Success But I am not getting a final Access-Accept (nor an Access-Reject), and it the authentication fails.... Any idea where could be the problem? Thanks a lot! Copyright (C) 1999-2015 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/local/etc2/freeradius/share/freeradius/dictionary including dictionary file /usr/local/etc2/freeradius/share/freeradius/dictionary.dhcp including dictionary file /usr/local/etc2/freeradius/share/freeradius/dictionary.vqp including dictionary file /usr/local/etc2/freeradius/etc/raddb/dictionary including configuration file /usr/local/etc2/freeradius/etc/raddb/radiusd.conf including configuration file /usr/local/etc2/freeradius/etc/raddb/proxy.conf including configuration file /usr/local/etc2/freeradius/etc/raddb/clients.conf including files in directory /usr/local/etc2/freeradius/etc/raddb/mods-enabled/ including configuration file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/always including configuration file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/attr_filter including configuration file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/cache_eap including configuration file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/chap including configuration file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/detail including configuration file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/detail.log including configuration file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/digest including configuration file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/dhcp including configuration file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/dynamic_clients including configuration file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/eap including configuration file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/echo including configuration file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/exec including configuration file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/expiration including configuration file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/expr including configuration file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/files including configuration file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/linelog including configuration file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/logintime including configuration file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/mschap including configuration file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/ntlm_auth including configuration file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/pap including configuration file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/passwd including configuration file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/preprocess including configuration file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/radutmp including configuration file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/realm including configuration file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/replicate including configuration file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/soh including configuration file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/sradutmp including configuration file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/unix including configuration file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/unpack including configuration file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/utf8 including configuration file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/ldap including configuration file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/ippool including files in directory /usr/local/etc2/freeradius/etc/raddb/policy.d/ including configuration file /usr/local/etc2/freeradius/etc/raddb/policy.d/abfab-tr including configuration file /usr/local/etc2/freeradius/etc/raddb/policy.d/accounting including configuration file /usr/local/etc2/freeradius/etc/raddb/policy.d/canonicalization including configuration file /usr/local/etc2/freeradius/etc/raddb/policy.d/control including configuration file /usr/local/etc2/freeradius/etc/raddb/policy.d/cui including configuration file /usr/local/etc2/freeradius/etc/raddb/policy.d/debug including configuration file /usr/local/etc2/freeradius/etc/raddb/policy.d/dhcp including configuration file /usr/local/etc2/freeradius/etc/raddb/policy.d/eap including configuration file /usr/local/etc2/freeradius/etc/raddb/policy.d/filter including configuration file /usr/local/etc2/freeradius/etc/raddb/policy.d/operator-name including configuration file /usr/local/etc2/freeradius/etc/raddb/policy.d/unav.policies including files in directory /usr/local/etc2/freeradius/etc/raddb/sites-enabled/ including configuration file /usr/local/etc2/freeradius/etc/raddb/sites-enabled/default including configuration file /usr/local/etc2/freeradius/etc/raddb/sites-enabled/inner-tunnel including configuration file /usr/local/etc2/freeradius/etc/raddb/sites-enabled/status main { security { user = "radius" group = "radius" allow_core_dumps = no } name = "radiusd" prefix = "/usr/local/etc2/freeradius" localstatedir = "/usr/local/etc2/freeradius/var" logdir = "/usr/local/etc2/freeradius/var/log/radius" run_dir = "/usr/local/etc2/freeradius/var/run/radiusd" } main { name = "radiusd" prefix = "/usr/local/etc2/freeradius" localstatedir = "/usr/local/etc2/freeradius/var" sbindir = "/usr/local/etc2/freeradius/sbin" logdir = "/usr/local/etc2/freeradius/var/log/radius" run_dir = "/usr/local/etc2/freeradius/var/run/radiusd" libdir = "/usr/local/etc2/freeradius/lib" radacctdir = "/usr/local/etc2/freeradius/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/usr/local/etc2/freeradius/var/run/radiusd/radiusd.pid" checkrad = "/usr/local/etc2/freeradius/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = yes auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes allow_vulnerable_openssl = "CVE-2014-0160" } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server radiusproxy1 { ipaddr = 159.23xxxx port = 1812 type = "auth+acct" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 60 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server radiusproxy2 { ipaddr = 159.237xxx port = 1812 type = "auth+acct" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 60 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } realm ~^(.*\.)?unav\.es$ { } realm UNAV-PDC-01 { } realm LOCAL { } realm NULL { } home_server_pool radiusproxy_pool { type = fail-over home_server = xxx home_server = xxx } realm ~.+$ { pool = radiusproxy_pool nostrip } home_server_pool my_auth_failover { type = fail-over home_server = localhost } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client WirelessSW_Dere { ipaddr = xxx netmask = 32 require_message_authenticator = no secret = <<< secret >>> shortname = "WirelessSW" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client WirelessSW_PRE { ipaddr = xxx netmask = 32 require_message_authenticator = no secret = <<< secret >>> shortname = "WirelessSW" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = digest # Creating Autz-Type = Status-Server radiusd: #### Instantiating modules #### # Loaded module rlm_always # Loading module "reject" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/usr/local/etc2/freeradius/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/usr/local/etc2/freeradius/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/usr/local/etc2/freeradius/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/usr/local/etc2/freeradius/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/usr/local/etc2/freeradius/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_cache # Loading module "cache_eap" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_chap # Loading module "chap" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/chap # Loaded module rlm_detail # Loading module "detail" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/detail detail { filename = "/usr/local/etc2/freeradius/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "auth_log" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/usr/local/etc2/freeradius/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/usr/local/etc2/freeradius/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/usr/local/etc2/freeradius/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/usr/local/etc2/freeradius/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_digest # Loading module "digest" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/digest # Loaded module rlm_dhcp # Loading module "dhcp" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/dhcp # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_eap # Loading module "eap" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_exec # Loading module "echo" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loading module "exec" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_expiration # Loading module "expiration" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/expiration # Loaded module rlm_expr # Loading module "expr" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_files # Loading module "files" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/files files { filename = "/usr/local/etc2/freeradius/etc/raddb/mods-config/files/authorize" acctusersfile = "/usr/local/etc2/freeradius/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/usr/local/etc2/freeradius/etc/raddb/mods-config/files/pre-proxy" } # Loaded module rlm_linelog # Loading module "linelog" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/linelog linelog { filename = "/usr/local/etc2/freeradius/var/log/radius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/usr/local/etc2/freeradius/var/log/radius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_logintime # Loading module "logintime" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_mschap # Loading module "mschap" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --username=%{%{Stripped-User-Name}:-%{%{User-Name}:-None}} --challenge=%{%{mschap:Challenge}:-00} --nt-response=%{%{mschap:NT-Response}:-00}" passchange { } allow_retry = yes } # Loading module "ntlm_auth" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_pap # Loading module "pap" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_preprocess # Loading module "preprocess" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/usr/local/etc2/freeradius/etc/raddb/mods-config/preprocess/huntgroups" hints = "/usr/local/etc2/freeradius/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_radutmp # Loading module "radutmp" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/radutmp radutmp { filename = "/usr/local/etc2/freeradius/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_realm # Loading module "IPASS" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = yes } # Loading module "realmpercent" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_replicate # Loading module "replicate" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/replicate # Loaded module rlm_soh # Loading module "soh" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/soh soh { dhcp = yes } # Loading module "sradutmp" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/usr/local/etc2/freeradius/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_unix # Loading module "unix" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/unix unix { radwtmp = "/usr/local/etc2/freeradius/var/log/radius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_unpack # Loading module "unpack" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/unpack # Loaded module rlm_utf8 # Loading module "utf8" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/utf8 # Loaded module rlm_ldap # Loading module "ldap" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/ldap ldap { server = "ldap.unav.es" identity = "cn=radiusOp,dc=unav,dc=es" password = <<< secret >>> sasl { } user { scope = "sub" access_positive = yes sasl { } } group { filter = "(objectClass=posixGroup)" scope = "sub" name_attribute = "cn" membership_attribute = "member" cacheable_name = no cacheable_dn = no } client { filter = "(objectClass=radiusClient)" scope = "sub" base_dn = "ou=radius,o=accounts,dc=unav,dc=es" } profile { } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 1 res_timeout = 10 srv_timelimit = 3 idle = 60 probes = 3 interval = 3 } tls { start_tls = yes } } Creating attribute LDAP-Group # Loaded module rlm_ippool # Loading module "VPN_IPSEC_CUN" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/ippool ippool VPN_IPSEC_CUN { filename = "/usr/local/etc2/freeradius/etc/raddb/db.ippool.VPN.IPSEC.CUN" ip_index = "/usr/local/etc2/freeradius/etc/raddb/db.ipindex.VPN.IPSEC.CUN" key = "%{Acct-Session-Id}" range_start = xxx range_stop = xxx netmask = 255.255.255.0 cache_size = 255 override = no maximum_timeout = 0 } instantiate { } modules { # Instantiating module "reject" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/always # Instantiating module "fail" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/always # Instantiating module "ok" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/always # Instantiating module "handled" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/always # Instantiating module "invalid" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/always # Instantiating module "userlock" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/always # Instantiating module "notfound" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/always # Instantiating module "noop" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/always # Instantiating module "updated" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/always # Instantiating module "attr_filter.post-proxy" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/etc2/freeradius/etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/etc2/freeradius/etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/etc2/freeradius/etc/raddb/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/etc2/freeradius/etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/etc2/freeradius/etc/raddb/mods-config/attr_filter/accounting_response # Instantiating module "cache_eap" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "detail" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/detail # Instantiating module "auth_log" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/detail.log # Instantiating module "eap" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 ca_path = "/usr/local/etc2/freeradius/etc/raddb/certs" pem_file_type = yes private_key_file = "/usr/local/etc2/freeradius/etc/raddb/certs/radius.unav.es_privatekey.pem" certificate_file = "/usr/local/etc2/freeradius/etc/raddb/certs/radius.unav.es_cert.pem" ca_file = "/usr/local/etc2/freeradius/etc/raddb/certs/TERENASSL_PATH.pem" dh_file = "/usr/local/etc2/freeradius/etc/raddb/certs/dh" fragment_size = 1024 include_length = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" ecdh_curve = "prime256v1" cache { enable = yes lifetime = 24 max_entries = 255 } verify { } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = yes use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = yes use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "expiration" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/expiration # Instantiating module "files" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/files reading pairlist file /usr/local/etc2/freeradius/etc/raddb/mods-config/files/authorize reading pairlist file /usr/local/etc2/freeradius/etc/raddb/mods-config/files/users.vpn reading pairlist file /usr/local/etc2/freeradius/etc/raddb/mods-config/files/accounting reading pairlist file /usr/local/etc2/freeradius/etc/raddb/mods-config/files/pre-proxy # Instantiating module "linelog" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/linelog # Instantiating module "log_accounting" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/linelog # Instantiating module "logintime" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/logintime # Instantiating module "mschap" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/mschap rlm_mschap (mschap): authenticating by calling 'ntlm_auth' # Instantiating module "pap" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/pap # Instantiating module "etc_passwd" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "preprocess" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/preprocess reading pairlist file /usr/local/etc2/freeradius/etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /usr/local/etc2/freeradius/etc/raddb/mods-config/preprocess/hints # Instantiating module "IPASS" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/realm # Instantiating module "suffix" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/realm # Instantiating module "realmpercent" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/realm # Instantiating module "ntdomain" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/realm # Instantiating module "ldap" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/ldap rlm_ldap: libldap vendor: OpenLDAP, version: 20439 accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } rlm_ldap (ldap): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldap://ldap.unav.es:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots used rlm_ldap (ldap): Connecting to ldap://ldap.unav.es:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots used rlm_ldap (ldap): Connecting to ldap://ldap.unav.es:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots used rlm_ldap (ldap): Connecting to ldap://ldap.unav.es:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots used rlm_ldap (ldap): Connecting to ldap://ldap.unav.es:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful # Instantiating module "VPN_IPSEC_CUN" from file /usr/local/etc2/freeradius/etc/raddb/mods-enabled/ippool } # modules radiusd: #### Loading Virtual Servers #### server { # from file /usr/local/etc2/freeradius/etc/raddb/radiusd.conf } # server server default { # from file /usr/local/etc2/freeradius/etc/raddb/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading session {...} # Loading pre-proxy {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default server inner-tunnel { # from file /usr/local/etc2/freeradius/etc/raddb/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} } # server inner-tunnel server status { # from file /usr/local/etc2/freeradius/etc/raddb/sites-enabled/status # Loading authorize {...} } # server status radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } listen { type = "status" ipaddr = 127.0.0.1 port = 18121 client admin { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on status address 127.0.0.1 port 18121 bound to server status Listening on proxy address * port 48633 Listening on proxy address :: port 36571 Ready to process requests (0) Received Access-Request Id 32 from xxxxxx:45903 to xxx12.225:1812 length 215 (0) User-Name = "oscarrdg(a)unav.es" (0) NAS-IP-Address = xxx (0) NAS-Port = 0 (0) NAS-Identifier = "xxx (0) NAS-Port-Type = Wireless-802.11 (0) Calling-Station-Id = "344DF73C9C98" (0) Called-Station-Id = "001A1E003250" (0) Service-Type = Framed-User (0) Framed-MTU = 1100 (0) EAP-Message = 0x02010015016f7363617272646740756e61762e6573 (0) Aruba-Essid-Name = "eduroam-pre" (0) Aruba-Location-Id = "10.9.1" (0) Aruba-AP-Group = "Amigos" (0) Aruba-Device-Type = "Android" (0) Message-Authenticator = 0xaf370dcdcf5551f50dbe03c00a1b1a67 (0) # Executing section authorize from file /usr/local/etc2/freeradius/etc/raddb/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (!&User-Name) { (0) if (!&User-Name) -> FALSE (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@.*@/ ) { (0) if (&User-Name =~ /@.*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) auth_log: EXPAND /usr/local/etc2/freeradius/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (0) auth_log: --> /usr/local/etc2/freeradius/var/log/radius/radacct/xxx/auth-detail-20151119 (0) auth_log: /usr/local/etc2/freeradius/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /usr/local/etc2/freeradius/var/log/radius/radacct/xxx/auth-detail-20151119 (0) auth_log: EXPAND %t (0) auth_log: --> Thu Nov 19 16:13:11 2015 (0) [auth_log] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: Looking up realm "unav.es" for User-Name = "oscarrdg(a)unav.es" (0) suffix: Found realm "~^(.*\.)?unav\.es$" (0) suffix: Adding Stripped-User-Name = "oscarrdg" (0) suffix: Adding Realm = "unav.es" (0) suffix: Authentication realm is LOCAL (0) [suffix] = ok (0) ntdomain: Request already has destination realm set. Ignoring (0) [ntdomain] = noop (0) eap: Peer sent EAP Response (code 2) ID 1 length 21 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = EAP (0) # Executing group from file /usr/local/etc2/freeradius/etc/raddb/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_md5 to process data (0) eap_md5: Issuing MD5 Challenge (0) eap: Sending EAP Request (code 1) ID 2 length 22 (0) eap: EAP session adding &reply:State = 0x4a7c50d94a7e547d (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) Post-Auth-Type sub-section not found. Ignoring. (0) # Executing group from file /usr/local/etc2/freeradius/etc/raddb/sites-enabled/default (0) Sent Access-Challenge Id 32 from xxx:1812 to xxx:45903 length 0 (0) EAP-Message = 0x0102001604106a56e58dbbd858bd44f49a49b03bb1d7 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0x4a7c50d94a7e547df1395bb8ee5037b2 (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 237 from xxxxxx:45903 to xx.225:1812 length 218 (1) User-Name = "oscarrdg(a)unav.es" (1) NAS-IP-Address = xxxxxx (1) NAS-Port = 0 (1) NAS-Identifier = "xxxxxx" (1) NAS-Port-Type = Wireless-802.11 (1) Calling-Station-Id = "344DF73C9C98" (1) Called-Station-Id = "001A1E003250" (1) Service-Type = Framed-User (1) Framed-MTU = 1100 (1) EAP-Message = 0x020200060319 (1) State = 0x4a7c50d94a7e547df1395bb8ee5037b2 (1) Aruba-Essid-Name = "eduroam-pre" (1) Aruba-Location-Id = "10.9.1" (1) Aruba-AP-Group = "Amigos" (1) Aruba-Device-Type = "Android" (1) Message-Authenticator = 0x84aefd176e8b40d09dbe4a527366c8b7 (1) session-state: No cached attributes (1) # Executing section authorize from file /usr/local/etc2/freeradius/etc/raddb/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (!&User-Name) { (1) if (!&User-Name) -> FALSE (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@.*@/ ) { (1) if (&User-Name =~ /@.*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /(a)\./) { (1) if (&User-Name =~ /(a)\./) -> FALSE (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) auth_log: EXPAND /usr/local/etc2/freeradius/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (1) auth_log: --> /usr/local/etc2/freeradius/var/log/radius/radacct/xxxxxx/auth-detail-20151119 (1) auth_log: /usr/local/etc2/freeradius/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /usr/local/etc2/freeradius/var/log/radius/radacct/xxxxxx/auth-detail-20151119 (1) auth_log: EXPAND %t (1) auth_log: --> Thu Nov 19 16:13:11 2015 (1) [auth_log] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: Looking up realm "unav.es" for User-Name = "oscarrdg(a)unav.es" (1) suffix: Found realm "~^(.*\.)?unav\.es$" (1) suffix: Adding Stripped-User-Name = "oscarrdg" (1) suffix: Adding Realm = "unav.es" (1) suffix: Authentication realm is LOCAL (1) [suffix] = ok (1) ntdomain: Request already has destination realm set. Ignoring (1) [ntdomain] = noop (1) eap: Peer sent EAP Response (code 2) ID 2 length 6 (1) eap: No EAP Start, assuming it's an on-going EAP conversation (1) [eap] = updated (1) policy unav.authorize.default { (1) if ( "%{client:group}" == "wireless" ) { (1) EXPAND %{client:group} (1) --> wireless (1) if ( "%{client:group}" == "wireless" ) -> TRUE (1) if ( "%{client:group}" == "wireless" ) { (1) if ( Aruba-Essid-Name == "eduroam" || Aruba-Essid-Name == "eduroam-pre" ) { (1) if ( Aruba-Essid-Name == "eduroam" || Aruba-Essid-Name == "eduroam-pre" ) -> TRUE (1) if ( Aruba-Essid-Name == "eduroam" || Aruba-Essid-Name == "eduroam-pre" ) { (1) policy unav.reject.eduroam.baddomain { (1) if ( Realm =~ /myabc\.com$/i ) { (1) if ( Realm =~ /myabc\.com$/i ) -> FALSE (1) if ( Realm =~ /wlan\.[[:alnum:]]+\.[[:alnum:]]+\.3gppnetwork\.org$/i ) { (1) if ( Realm =~ /wlan\.[[:alnum:]]+\.[[:alnum:]]+\.3gppnetwork\.org$/i ) -> FALSE (1) if ( Realm =~ /gmail\.co(m|\.[[:alnum:]][[:alnum:]])$/i ) { (1) if ( Realm =~ /gmail\.co(m|\.[[:alnum:]][[:alnum:]])$/i ) -> FALSE (1) if ( Realm =~ /yahoo\.co(m|\.[[:alnum:]][[:alnum:]])$/i ) { (1) if ( Realm =~ /yahoo\.co(m|\.[[:alnum:]][[:alnum:]])$/i ) -> FALSE (1) if ( Realm =~ /hotmail\.co(m|\.[[:alnum:]][[:alnum:]])$/i ) { (1) if ( Realm =~ /hotmail\.co(m|\.[[:alnum:]][[:alnum:]])$/i ) -> FALSE (1) } # policy unav.reject.eduroam.baddomain = updated (1) if ( Service-Type == "Login-User" ) { (1) if ( Service-Type == "Login-User" ) -> FALSE (1) } # if ( Aruba-Essid-Name == "eduroam" || Aruba-Essid-Name == "eduroam-pre" ) = updated (1) ... skipping elsif for request 1: Preceding "if" was taken (1) ... skipping else for request 1: Preceding "if" was taken (1) } # if ( "%{client:group}" == "wireless" ) = updated (1) ... skipping elsif for request 1: Preceding "if" was taken (1) ... skipping elsif for request 1: Preceding "if" was taken (1) ... skipping elsif for request 1: Preceding "if" was taken (1) ... skipping elsif for request 1: Preceding "if" was taken (1) ... skipping elsif for request 1: Preceding "if" was taken (1) ... skipping else for request 1: Preceding "if" was taken (1) } # policy unav.authorize.default = updated (1) [expiration] = noop (1) [logintime] = noop (1) pap: WARNING: No "known good" password found for the user. Not setting Auth-Type (1) pap: WARNING: Authentication will fail unless a "known good" password is available (1) [pap] = noop (1) if (control:Cleartext-Password) { (1) if (control:Cleartext-Password) -> FALSE (1) } # authorize = updated (1) Found Auth-Type = EAP (1) # Executing group from file /usr/local/etc2/freeradius/etc/raddb/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0x4a7c50d94a7e547d (1) eap: Finished EAP session with state 0x4a7c50d94a7e547d (1) eap: Previous EAP request found for state 0x4a7c50d94a7e547d, released from the list (1) eap: Peer sent packet with method EAP NAK (3) (1) eap: Found mutually acceptable type PEAP (25) (1) eap: Calling submodule eap_peap to process data (1) eap_peap: Initiating new EAP-TLS session (1) eap_peap: Flushing SSL sessions (of #0) (1) eap_peap: [eaptls start] = request (1) eap: Sending EAP Request (code 1) ID 3 length 6 (1) eap: EAP session adding &reply:State = 0x4a7c50d94b7f497d (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) Post-Auth-Type sub-section not found. Ignoring. (1) # Executing group from file /usr/local/etc2/freeradius/etc/raddb/sites-enabled/default (1) Sent Access-Challenge Id 237 from xxx12.225:1812 to xxxxxx:45903 length 0 (1) EAP-Message = 0x010300061920 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0x4a7c50d94b7f497df1395bb8ee5037b2 (1) Finished request Waking up in 4.9 seconds. (2) Received Access-Request Id 126 from xxxxxx:45903 to xxx12.225:1812 length 380 (2) User-Name = "oscarrdg(a)unav.es" (2) NAS-IP-Address = xxxxxx (2) NAS-Port = 0 (2) NAS-Identifier = "xxxxxx" (2) NAS-Port-Type = Wireless-802.11 (2) Calling-Station-Id = "344DF73C9C98" (2) Called-Station-Id = "001A1E003250" (2) Service-Type = Framed-User (2) Framed-MTU = 1100 (2) EAP-Message = 0x020300a819800000009e160301009901000095030389bc40fcda2b3a01d0bd76bc2cd77cc2a31e6d59aa10c82aba3cd714a628ceca00003cc02cc030009fc02bc02f009ec00ac024c014c0280039006bc009c023c013c02700330067c007c011009d009c0035003d002f003c00050004000a00ff010000 (2) State = 0x4a7c50d94b7f497df1395bb8ee5037b2 (2) Aruba-Essid-Name = "eduroam-pre" (2) Aruba-Location-Id = "10.9.1" (2) Aruba-AP-Group = "Amigos" (2) Aruba-Device-Type = "Android" (2) Message-Authenticator = 0x5a70fd8f3ee58367fba8226efb8fca04 (2) session-state: No cached attributes (2) # Executing section authorize from file /usr/local/etc2/freeradius/etc/raddb/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (!&User-Name) { (2) if (!&User-Name) -> FALSE (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@.*@/ ) { (2) if (&User-Name =~ /@.*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /(a)\./) { (2) if (&User-Name =~ /(a)\./) -> FALSE (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) auth_log: EXPAND /usr/local/etc2/freeradius/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (2) auth_log: --> /usr/local/etc2/freeradius/var/log/radius/radacct/xxxxxx/auth-detail-20151119 (2) auth_log: /usr/local/etc2/freeradius/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /usr/local/etc2/freeradius/var/log/radius/radacct/xxxxxx/auth-detail-20151119 (2) auth_log: EXPAND %t (2) auth_log: --> Thu Nov 19 16:13:11 2015 (2) [auth_log] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: Looking up realm "unav.es" for User-Name = "oscarrdg(a)unav.es" (2) suffix: Found realm "~^(.*\.)?unav\.es$" (2) suffix: Adding Stripped-User-Name = "oscarrdg" (2) suffix: Adding Realm = "unav.es" (2) suffix: Authentication realm is LOCAL (2) [suffix] = ok (2) ntdomain: Request already has destination realm set. Ignoring (2) [ntdomain] = noop (2) eap: Peer sent EAP Response (code 2) ID 3 length 168 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = EAP (2) # Executing group from file /usr/local/etc2/freeradius/etc/raddb/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0x4a7c50d94b7f497d (2) eap: Finished EAP session with state 0x4a7c50d94b7f497d (2) eap: Previous EAP request found for state 0x4a7c50d94b7f497d, released from the list (2) eap: Peer sent packet with method EAP PEAP (25) (2) eap: Calling submodule eap_peap to process data (2) eap_peap: Continuing EAP-TLS (2) eap_peap: Peer indicated complete TLS record size will be 158 bytes (2) eap_peap: Got complete TLS record (158 bytes) (2) eap_peap: [eaptls verify] = length included (2) eap_peap: (other): before/accept initialization (2) eap_peap: TLS_accept: before/accept initialization (2) eap_peap: <<< TLS 1.2 [length 0099] (2) eap_peap: TLS_accept: SSLv3 read client hello A (2) eap_peap: >>> TLS 1.2 [length 0059] (2) eap_peap: TLS_accept: SSLv3 write server hello A (2) eap_peap: >>> TLS 1.2 [length 11ce] (2) eap_peap: TLS_accept: SSLv3 write certificate A (2) eap_peap: >>> TLS 1.2 [length 014d] (2) eap_peap: TLS_accept: SSLv3 write key exchange A (2) eap_peap: >>> TLS 1.2 [length 0004] (2) eap_peap: TLS_accept: SSLv3 write server done A (2) eap_peap: TLS_accept: SSLv3 flush data (2) eap_peap: TLS_accept: Need to read more data: SSLv3 read client certificate A (2) eap_peap: TLS_accept: Need to read more data: SSLv3 read client certificate A (2) eap_peap: In SSL Handshake Phase (2) eap_peap: In SSL Accept mode (2) eap_peap: [eaptls process] = handled (2) eap: Sending EAP Request (code 1) ID 4 length 1004 (2) eap: EAP session adding &reply:State = 0x4a7c50d94878497d (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) Post-Auth-Type sub-section not found. Ignoring. (2) # Executing group from file /usr/local/etc2/freeradius/etc/raddb/sites-enabled/default (2) Sent Access-Challenge Id 126 from xxx12.225:1812 to xxxxxx:45903 length 0 (2) EAP-Message = 0x010403ec19c00000138c1603030059020000550303564de7077094b72f12c56237fbc9affbe100f088a0685fec0f9239b56ae77d0620e7b0567766cb019801cfbfed0facaa4f74a4e4e1bf48c6e2807b179ab3eab127c03000000dff01000100000b00040300010216030311ce0b0011ca0011c70004a5 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0x4a7c50d94878497df1395bb8ee5037b2 (2) Finished request Waking up in 4.9 seconds. (3) Received Access-Request Id 64 from xxxxxx:45903 to xxx12.225:1812 length 218 (3) User-Name = "oscarrdg(a)unav.es" (3) NAS-IP-Address = xxxxxx (3) NAS-Port = 0 (3) NAS-Identifier = "xxxxxx" (3) NAS-Port-Type = Wireless-802.11 (3) Calling-Station-Id = "344DF73C9C98" (3) Called-Station-Id = "001A1E003250" (3) Service-Type = Framed-User (3) Framed-MTU = 1100 (3) EAP-Message = 0x020400061900 (3) State = 0x4a7c50d94878497df1395bb8ee5037b2 (3) Aruba-Essid-Name = "eduroam-pre" (3) Aruba-Location-Id = "10.9.1" (3) Aruba-AP-Group = "Amigos" (3) Aruba-Device-Type = "Android" (3) Message-Authenticator = 0x3aec9ff6dcbdf02f48d43f32e48157e4 (3) session-state: No cached attributes (3) # Executing section authorize from file /usr/local/etc2/freeradius/etc/raddb/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (!&User-Name) { (3) if (!&User-Name) -> FALSE (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@.*@/ ) { (3) if (&User-Name =~ /@.*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /(a)\./) { (3) if (&User-Name =~ /(a)\./) -> FALSE (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) auth_log: EXPAND /usr/local/etc2/freeradius/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (3) auth_log: --> /usr/local/etc2/freeradius/var/log/radius/radacct/xxxxxx/auth-detail-20151119 (3) auth_log: /usr/local/etc2/freeradius/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /usr/local/etc2/freeradius/var/log/radius/radacct/xxxxxx/auth-detail-20151119 (3) auth_log: EXPAND %t (3) auth_log: --> Thu Nov 19 16:13:11 2015 (3) [auth_log] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: Looking up realm "unav.es" for User-Name = "oscarrdg(a)unav.es" (3) suffix: Found realm "~^(.*\.)?unav\.es$" (3) suffix: Adding Stripped-User-Name = "oscarrdg" (3) suffix: Adding Realm = "unav.es" (3) suffix: Authentication realm is LOCAL (3) [suffix] = ok (3) ntdomain: Request already has destination realm set. Ignoring (3) [ntdomain] = noop (3) eap: Peer sent EAP Response (code 2) ID 4 length 6 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = EAP (3) # Executing group from file /usr/local/etc2/freeradius/etc/raddb/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0x4a7c50d94878497d (3) eap: Finished EAP session with state 0x4a7c50d94878497d (3) eap: Previous EAP request found for state 0x4a7c50d94878497d, released from the list (3) eap: Peer sent packet with method EAP PEAP (25) (3) eap: Calling submodule eap_peap to process data (3) eap_peap: Continuing EAP-TLS (3) eap_peap: Peer ACKed our handshake fragment (3) eap_peap: [eaptls verify] = request (3) eap_peap: [eaptls process] = handled (3) eap: Sending EAP Request (code 1) ID 5 length 1000 (3) eap: EAP session adding &reply:State = 0x4a7c50d94979497d (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) Post-Auth-Type sub-section not found. Ignoring. (3) # Executing group from file /usr/local/etc2/freeradius/etc/raddb/sites-enabled/default (3) Sent Access-Challenge Id 64 from xxx12.225:1812 to xxxxxx:45903 length 0 (3) EAP-Message = 0x010503e819402e73692e756e61762e6573820f7261646975732e756e61762e656475300d06092a864886f70d010105050003820101008d5a00339dca417d4b5b7c98c5d05763925d58ea76ff6431c64313da556a5d759f867846b256881352385407721c3b81539755438573a805ecb0acdf0a94a9f874 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0x4a7c50d94979497df1395bb8ee5037b2 (3) Finished request Waking up in 4.9 seconds. (4) Received Access-Request Id 234 from xxxxxx:45903 to xxx12.225:1812 length 218 (4) User-Name = "oscarrdg(a)unav.es" (4) NAS-IP-Address = xxxxxx (4) NAS-Port = 0 (4) NAS-Identifier = "xxxxxx" (4) NAS-Port-Type = Wireless-802.11 (4) Calling-Station-Id = "344DF73C9C98" (4) Called-Station-Id = "001A1E003250" (4) Service-Type = Framed-User (4) Framed-MTU = 1100 (4) EAP-Message = 0x020500061900 (4) State = 0x4a7c50d94979497df1395bb8ee5037b2 (4) Aruba-Essid-Name = "eduroam-pre" (4) Aruba-Location-Id = "10.9.1" (4) Aruba-AP-Group = "Amigos" (4) Aruba-Device-Type = "Android" (4) Message-Authenticator = 0x8a034f3911b75ff877975ad4bec02ff4 (4) session-state: No cached attributes (4) # Executing section authorize from file /usr/local/etc2/freeradius/etc/raddb/sites-enabled/default (4) authorize { (4) policy filter_username { (4) if (!&User-Name) { (4) if (!&User-Name) -> FALSE (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@.*@/ ) { (4) if (&User-Name =~ /@.*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /(a)\./) { (4) if (&User-Name =~ /(a)\./) -> FALSE (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) auth_log: EXPAND /usr/local/etc2/freeradius/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (4) auth_log: --> /usr/local/etc2/freeradius/var/log/radius/radacct/xxxxxx/auth-detail-20151119 (4) auth_log: /usr/local/etc2/freeradius/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /usr/local/etc2/freeradius/var/log/radius/radacct/xxxxxx/auth-detail-20151119 (4) auth_log: EXPAND %t (4) auth_log: --> Thu Nov 19 16:13:11 2015 (4) [auth_log] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: Looking up realm "unav.es" for User-Name = "oscarrdg(a)unav.es" (4) suffix: Found realm "~^(.*\.)?unav\.es$" (4) suffix: Adding Stripped-User-Name = "oscarrdg" (4) suffix: Adding Realm = "unav.es" (4) suffix: Authentication realm is LOCAL (4) [suffix] = ok (4) ntdomain: Request already has destination realm set. Ignoring (4) [ntdomain] = noop (4) eap: Peer sent EAP Response (code 2) ID 5 length 6 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = EAP (4) # Executing group from file /usr/local/etc2/freeradius/etc/raddb/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0x4a7c50d94979497d (4) eap: Finished EAP session with state 0x4a7c50d94979497d (4) eap: Previous EAP request found for state 0x4a7c50d94979497d, released from the list (4) eap: Peer sent packet with method EAP PEAP (25) (4) eap: Calling submodule eap_peap to process data (4) eap_peap: Continuing EAP-TLS (4) eap_peap: Peer ACKed our handshake fragment (4) eap_peap: [eaptls verify] = request (4) eap_peap: [eaptls process] = handled (4) eap: Sending EAP Request (code 1) ID 6 length 1000 (4) eap: EAP session adding &reply:State = 0x4a7c50d94e7a497d (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) Post-Auth-Type sub-section not found. Ignoring. (4) # Executing group from file /usr/local/etc2/freeradius/etc/raddb/sites-enabled/default (4) Sent Access-Challenge Id 234 from xxx12.225:1812 to xxxxxx:45903 length 0 (4) EAP-Message = 0x010603e8194002010030180603551d200411300f300d060b2b06010401b2310102021d30440603551d1f043d303b3039a037a0358633687474703a2f2f63726c2e7573657274727573742e636f6d2f55544e2d5553455246697273742d48617264776172652e63726c307406082b060105050701010468 (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0x4a7c50d94e7a497df1395bb8ee5037b2 (4) Finished request Waking up in 4.9 seconds. (5) Received Access-Request Id 230 from xxxxxx:45903 to xxx12.225:1812 length 218 (5) User-Name = "oscarrdg(a)unav.es" (5) NAS-IP-Address = xxxxxx (5) NAS-Port = 0 (5) NAS-Identifier = "xxxxxx" (5) NAS-Port-Type = Wireless-802.11 (5) Calling-Station-Id = "344DF73C9C98" (5) Called-Station-Id = "001A1E003250" (5) Service-Type = Framed-User (5) Framed-MTU = 1100 (5) EAP-Message = 0x020600061900 (5) State = 0x4a7c50d94e7a497df1395bb8ee5037b2 (5) Aruba-Essid-Name = "eduroam-pre" (5) Aruba-Location-Id = "10.9.1" (5) Aruba-AP-Group = "Amigos" (5) Aruba-Device-Type = "Android" (5) Message-Authenticator = 0x27a324ae82db56460d95f8e34748e3a8 (5) session-state: No cached attributes (5) # Executing section authorize from file /usr/local/etc2/freeradius/etc/raddb/sites-enabled/default (5) authorize { (5) policy filter_username { (5) if (!&User-Name) { (5) if (!&User-Name) -> FALSE (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@.*@/ ) { (5) if (&User-Name =~ /@.*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /(a)\./) { (5) if (&User-Name =~ /(a)\./) -> FALSE (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) auth_log: EXPAND /usr/local/etc2/freeradius/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (5) auth_log: --> /usr/local/etc2/freeradius/var/log/radius/radacct/xxxxxx/auth-detail-20151119 (5) auth_log: /usr/local/etc2/freeradius/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /usr/local/etc2/freeradius/var/log/radius/radacct/xxxxxx/auth-detail-20151119 (5) auth_log: EXPAND %t (5) auth_log: --> Thu Nov 19 16:13:11 2015 (5) [auth_log] = ok (5) [chap] = noop (5) [mschap] = noop (5) [digest] = noop (5) suffix: Checking for suffix after "@" (5) suffix: Looking up realm "unav.es" for User-Name = "oscarrdg(a)unav.es" (5) suffix: Found realm "~^(.*\.)?unav\.es$" (5) suffix: Adding Stripped-User-Name = "oscarrdg" (5) suffix: Adding Realm = "unav.es" (5) suffix: Authentication realm is LOCAL (5) [suffix] = ok (5) ntdomain: Request already has destination realm set. Ignoring (5) [ntdomain] = noop (5) eap: Peer sent EAP Response (code 2) ID 6 length 6 (5) eap: Continuing tunnel setup (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = EAP (5) # Executing group from file /usr/local/etc2/freeradius/etc/raddb/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0x4a7c50d94e7a497d (5) eap: Finished EAP session with state 0x4a7c50d94e7a497d (5) eap: Previous EAP request found for state 0x4a7c50d94e7a497d, released from the list (5) eap: Peer sent packet with method EAP PEAP (25) (5) eap: Calling submodule eap_peap to process data (5) eap_peap: Continuing EAP-TLS (5) eap_peap: Peer ACKed our handshake fragment (5) eap_peap: [eaptls verify] = request (5) eap_peap: [eaptls process] = handled (5) eap: Sending EAP Request (code 1) ID 7 length 1000 (5) eap: EAP session adding &reply:State = 0x4a7c50d94f7b497d (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) Post-Auth-Type sub-section not found. Ignoring. (5) # Executing group from file /usr/local/etc2/freeradius/etc/raddb/sites-enabled/default (5) Sent Access-Challenge Id 230 from xxx12.225:1812 to xxxxxx:45903 length 0 (5) EAP-Message = 0x010703e8194007386ec3a55e23bc459b7b50c1c9308fdbe52b7ad35bfb33401ea0d59817bc8b87c389d35da08eb2aaaaf68e698806c5fa8921f3089d692e09339b290d460f8ccc4934b06951bdf906cd68ad664cbc3eac61bd0a880ec8df3dee7c044c9d0a5e6b91d6eec7ed288dab4d878973d06ea4d0 (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0x4a7c50d94f7b497df1395bb8ee5037b2 (5) Finished request Waking up in 4.9 seconds. (6) Received Access-Request Id 168 from xxxxxx:45903 to xxx12.225:1812 length 218 (6) User-Name = "oscarrdg(a)unav.es" (6) NAS-IP-Address = xxxxxx (6) NAS-Port = 0 (6) NAS-Identifier = "xxxxxx" (6) NAS-Port-Type = Wireless-802.11 (6) Calling-Station-Id = "344DF73C9C98" (6) Called-Station-Id = "001A1E003250" (6) Service-Type = Framed-User (6) Framed-MTU = 1100 (6) EAP-Message = 0x020700061900 (6) State = 0x4a7c50d94f7b497df1395bb8ee5037b2 (6) Aruba-Essid-Name = "eduroam-pre" (6) Aruba-Location-Id = "10.9.1" (6) Aruba-AP-Group = "Amigos" (6) Aruba-Device-Type = "Android" (6) Message-Authenticator = 0x4cf19771edbbc663364c4e61d84ea4ca (6) session-state: No cached attributes (6) # Executing section authorize from file /usr/local/etc2/freeradius/etc/raddb/sites-enabled/default (6) authorize { (6) policy filter_username { (6) if (!&User-Name) { (6) if (!&User-Name) -> FALSE (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@.*@/ ) { (6) if (&User-Name =~ /@.*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /(a)\./) { (6) if (&User-Name =~ /(a)\./) -> FALSE (6) } # policy filter_username = notfound (6) [preprocess] = ok (6) auth_log: EXPAND /usr/local/etc2/freeradius/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (6) auth_log: --> /usr/local/etc2/freeradius/var/log/radius/radacct/xxxxxx/auth-detail-20151119 (6) auth_log: /usr/local/etc2/freeradius/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /usr/local/etc2/freeradius/var/log/radius/radacct/xxxxxx/auth-detail-20151119 (6) auth_log: EXPAND %t (6) auth_log: --> Thu Nov 19 16:13:11 2015 (6) [auth_log] = ok (6) [chap] = noop (6) [mschap] = noop (6) [digest] = noop (6) suffix: Checking for suffix after "@" (6) suffix: Looking up realm "unav.es" for User-Name = "oscarrdg(a)unav.es" (6) suffix: Found realm "~^(.*\.)?unav\.es$" (6) suffix: Adding Stripped-User-Name = "oscarrdg" (6) suffix: Adding Realm = "unav.es" (6) suffix: Authentication realm is LOCAL (6) [suffix] = ok (6) ntdomain: Request already has destination realm set. Ignoring (6) [ntdomain] = noop (6) eap: Peer sent EAP Response (code 2) ID 7 length 6 (6) eap: Continuing tunnel setup (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = EAP (6) # Executing group from file /usr/local/etc2/freeradius/etc/raddb/sites-enabled/default (6) authenticate { (6) eap: Expiring EAP session with state 0x4a7c50d94f7b497d (6) eap: Finished EAP session with state 0x4a7c50d94f7b497d (6) eap: Previous EAP request found for state 0x4a7c50d94f7b497d, released from the list (6) eap: Peer sent packet with method EAP PEAP (25) (6) eap: Calling submodule eap_peap to process data (6) eap_peap: Continuing EAP-TLS (6) eap_peap: Peer ACKed our handshake fragment (6) eap_peap: [eaptls verify] = request (6) eap_peap: [eaptls process] = handled (6) eap: Sending EAP Request (code 1) ID 8 length 1000 (6) eap: EAP session adding &reply:State = 0x4a7c50d94c74497d (6) [eap] = handled (6) } # authenticate = handled (6) Using Post-Auth-Type Challenge (6) Post-Auth-Type sub-section not found. Ignoring. (6) # Executing group from file /usr/local/etc2/freeradius/etc/raddb/sites-enabled/default (6) Sent Access-Challenge Id 168 from xxx12.225:1812 to xxxxxx:45903 length 0 (6) EAP-Message = 0x010803e81940e8329e74cac89054e9c65f0f789d9a403c0eac61aa5e148f9e87a16a50dcd79a4eaf05b3a671949c71b350600ac7139d38078602a8e9a869261890ab4cb04f23ab3a4f84d8dfce9fe1696fbbd742d76b44e4c7adee6d415f725a710837b37965a459a09437f7002f0dc29272dad03872db (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0x4a7c50d94c74497df1395bb8ee5037b2 (6) Finished request Waking up in 4.8 seconds. (7) Received Access-Request Id 112 from xxxxxx:45903 to xxx12.225:1812 length 218 (7) User-Name = "oscarrdg(a)unav.es" (7) NAS-IP-Address = xxxxxx (7) NAS-Port = 0 (7) NAS-Identifier = "xxxxxx" (7) NAS-Port-Type = Wireless-802.11 (7) Calling-Station-Id = "344DF73C9C98" (7) Called-Station-Id = "001A1E003250" (7) Service-Type = Framed-User (7) Framed-MTU = 1100 (7) EAP-Message = 0x020800061900 (7) State = 0x4a7c50d94c74497df1395bb8ee5037b2 (7) Aruba-Essid-Name = "eduroam-pre" (7) Aruba-Location-Id = "10.9.1" (7) Aruba-AP-Group = "Amigos" (7) Aruba-Device-Type = "Android" (7) Message-Authenticator = 0x15bf70b018be20dac76d5bdc4532dc08 (7) session-state: No cached attributes (7) # Executing section authorize from file /usr/local/etc2/freeradius/etc/raddb/sites-enabled/default (7) authorize { (7) policy filter_username { (7) if (!&User-Name) { (7) if (!&User-Name) -> FALSE (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@.*@/ ) { (7) if (&User-Name =~ /@.*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /(a)\./) { (7) if (&User-Name =~ /(a)\./) -> FALSE (7) } # policy filter_username = notfound (7) [preprocess] = ok (7) auth_log: EXPAND /usr/local/etc2/freeradius/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (7) auth_log: --> /usr/local/etc2/freeradius/var/log/radius/radacct/xxxxxx/auth-detail-20151119 (7) auth_log: /usr/local/etc2/freeradius/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /usr/local/etc2/freeradius/var/log/radius/radacct/xxxxxx/auth-detail-20151119 (7) auth_log: EXPAND %t (7) auth_log: --> Thu Nov 19 16:13:11 2015 (7) [auth_log] = ok (7) [chap] = noop (7) [mschap] = noop (7) [digest] = noop (7) suffix: Checking for suffix after "@" (7) suffix: Looking up realm "unav.es" for User-Name = "oscarrdg(a)unav.es" (7) suffix: Found realm "~^(.*\.)?unav\.es$" (7) suffix: Adding Stripped-User-Name = "oscarrdg" (7) suffix: Adding Realm = "unav.es" (7) suffix: Authentication realm is LOCAL (7) [suffix] = ok (7) ntdomain: Request already has destination realm set. Ignoring (7) [ntdomain] = noop (7) eap: Peer sent EAP Response (code 2) ID 8 length 6 (7) eap: Continuing tunnel setup (7) [eap] = ok (7) } # authorize = ok (7) Found Auth-Type = EAP (7) # Executing group from file /usr/local/etc2/freeradius/etc/raddb/sites-enabled/default (7) authenticate { (7) eap: Expiring EAP session with state 0x4a7c50d94c74497d (7) eap: Finished EAP session with state 0x4a7c50d94c74497d (7) eap: Previous EAP request found for state 0x4a7c50d94c74497d, released from the list (7) eap: Peer sent packet with method EAP PEAP (25) (7) eap: Calling submodule eap_peap to process data (7) eap_peap: Continuing EAP-TLS (7) eap_peap: Peer ACKed our handshake fragment (7) eap_peap: [eaptls verify] = request (7) eap_peap: [eaptls process] = handled (7) eap: Sending EAP Request (code 1) ID 9 length 40 (7) eap: EAP session adding &reply:State = 0x4a7c50d94d75497d (7) [eap] = handled (7) } # authenticate = handled (7) Using Post-Auth-Type Challenge (7) Post-Auth-Type sub-section not found. Ignoring. (7) # Executing group from file /usr/local/etc2/freeradius/etc/raddb/sites-enabled/default (7) Sent Access-Challenge Id 112 from xxx12.225:1812 to xxxxxx:45903 length 0 (7) EAP-Message = 0x0109002819007b286bccc4f4c141f4ea5ef8a1b16dd15183d01b5b81d5a4c616030300040e000000 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0x4a7c50d94d75497df1395bb8ee5037b2 (7) Finished request Waking up in 4.8 seconds. (8) Received Access-Request Id 251 from xxxxxx:45903 to xxx12.225:1812 length 348 (8) User-Name = "oscarrdg(a)unav.es" (8) NAS-IP-Address = xxxxxx (8) NAS-Port = 0 (8) NAS-Identifier = "xxxxxx" (8) NAS-Port-Type = Wireless-802.11 (8) Calling-Station-Id = "344DF73C9C98" (8) Called-Station-Id = "001A1E003250" (8) Service-Type = Framed-User (8) Framed-MTU = 1100 (8) EAP-Message = 0x0209008819800000007e160303004610000042410497d6d49495961db556fda8b469384d890ed741e0f137449e864c9a78bac1d3300980cf8556274e7270cfd6d411d7dee9cd216a49a794311cb559d577fdbeb832140303000101160303002800000000000000001e3ac64ea847ecf6941ba645884a54 (8) State = 0x4a7c50d94d75497df1395bb8ee5037b2 (8) Aruba-Essid-Name = "eduroam-pre" (8) Aruba-Location-Id = "10.9.1" (8) Aruba-AP-Group = "Amigos" (8) Aruba-Device-Type = "Android" (8) Message-Authenticator = 0x863b805103353c3f87d71a7ead7cb041 (8) session-state: No cached attributes (8) # Executing section authorize from file /usr/local/etc2/freeradius/etc/raddb/sites-enabled/default (8) authorize { (8) policy filter_username { (8) if (!&User-Name) { (8) if (!&User-Name) -> FALSE (8) if (&User-Name =~ / /) { (8) if (&User-Name =~ / /) -> FALSE (8) if (&User-Name =~ /@.*@/ ) { (8) if (&User-Name =~ /@.*@/ ) -> FALSE (8) if (&User-Name =~ /\.\./ ) { (8) if (&User-Name =~ /\.\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\.$/) { (8) if (&User-Name =~ /\.$/) -> FALSE (8) if (&User-Name =~ /(a)\./) { (8) if (&User-Name =~ /(a)\./) -> FALSE (8) } # policy filter_username = notfound (8) [preprocess] = ok (8) auth_log: EXPAND /usr/local/etc2/freeradius/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (8) auth_log: --> /usr/local/etc2/freeradius/var/log/radius/radacct/xxxxxx/auth-detail-20151119 (8) auth_log: /usr/local/etc2/freeradius/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /usr/local/etc2/freeradius/var/log/radius/radacct/xxxxxx/auth-detail-20151119 (8) auth_log: EXPAND %t (8) auth_log: --> Thu Nov 19 16:13:11 2015 (8) [auth_log] = ok (8) [chap] = noop (8) [mschap] = noop (8) [digest] = noop (8) suffix: Checking for suffix after "@" (8) suffix: Looking up realm "unav.es" for User-Name = "oscarrdg(a)unav.es" (8) suffix: Found realm "~^(.*\.)?unav\.es$" (8) suffix: Adding Stripped-User-Name = "oscarrdg" (8) suffix: Adding Realm = "unav.es" (8) suffix: Authentication realm is LOCAL (8) [suffix] = ok (8) ntdomain: Request already has destination realm set. Ignoring (8) [ntdomain] = noop (8) eap: Peer sent EAP Response (code 2) ID 9 length 136 (8) eap: Continuing tunnel setup (8) [eap] = ok (8) } # authorize = ok (8) Found Auth-Type = EAP (8) # Executing group from file /usr/local/etc2/freeradius/etc/raddb/sites-enabled/default (8) authenticate { (8) eap: Expiring EAP session with state 0x4a7c50d94d75497d (8) eap: Finished EAP session with state 0x4a7c50d94d75497d (8) eap: Previous EAP request found for state 0x4a7c50d94d75497d, released from the list (8) eap: Peer sent packet with method EAP PEAP (25) (8) eap: Calling submodule eap_peap to process data (8) eap_peap: Continuing EAP-TLS (8) eap_peap: Peer indicated complete TLS record size will be 126 bytes (8) eap_peap: Got complete TLS record (126 bytes) (8) eap_peap: [eaptls verify] = length included (8) eap_peap: <<< TLS 1.2 [length 0046] (8) eap_peap: TLS_accept: SSLv3 read client key exchange A (8) eap_peap: <<< TLS 1.2 [length 0001] (8) eap_peap: <<< TLS 1.2 [length 0010] (8) eap_peap: TLS_accept: SSLv3 read finished A (8) eap_peap: >>> TLS 1.2 [length 0001] (8) eap_peap: TLS_accept: SSLv3 write change cipher spec A (8) eap_peap: >>> TLS 1.2 [length 0010] (8) eap_peap: TLS_accept: SSLv3 write finished A (8) eap_peap: TLS_accept: SSLv3 flush data (8) eap_peap: (other): SSL negotiation finished successfully (8) eap_peap: SSL Connection Established (8) eap_peap: [eaptls process] = handled (8) eap: Sending EAP Request (code 1) ID 10 length 57 (8) eap: EAP session adding &reply:State = 0x4a7c50d94276497d (8) [eap] = handled (8) } # authenticate = handled (8) Using Post-Auth-Type Challenge (8) Post-Auth-Type sub-section not found. Ignoring. (8) # Executing group from file /usr/local/etc2/freeradius/etc/raddb/sites-enabled/default (8) Sent Access-Challenge Id 251 from xxx12.225:1812 to xxxxxx:45903 length 0 (8) EAP-Message = 0x010a0039190014030300010116030300286a2a84ab3ae80e62498198297caa9815c5334160580029e175eff17a7ecb2046472a0c0a01428bea (8) Message-Authenticator = 0x00000000000000000000000000000000 (8) State = 0x4a7c50d94276497df1395bb8ee5037b2 (8) Finished request Waking up in 4.8 seconds. (9) Received Access-Request Id 182 from xxxxxx:45903 to xxx12.225:1812 length 218 (9) User-Name = "oscarrdg(a)unav.es" (9) NAS-IP-Address = xxxxxx (9) NAS-Port = 0 (9) NAS-Identifier = "xxxxxx" (9) NAS-Port-Type = Wireless-802.11 (9) Calling-Station-Id = "344DF73C9C98" (9) Called-Station-Id = "001A1E003250" (9) Service-Type = Framed-User (9) Framed-MTU = 1100 (9) EAP-Message = 0x020a00061900 (9) State = 0x4a7c50d94276497df1395bb8ee5037b2 (9) Aruba-Essid-Name = "eduroam-pre" (9) Aruba-Location-Id = "10.9.1" (9) Aruba-AP-Group = "Amigos" (9) Aruba-Device-Type = "Android" (9) Message-Authenticator = 0x87e40768b0a6aedf20a4315cfe75d952 (9) session-state: No cached attributes (9) # Executing section authorize from file /usr/local/etc2/freeradius/etc/raddb/sites-enabled/default (9) authorize { (9) policy filter_username { (9) if (!&User-Name) { (9) if (!&User-Name) -> FALSE (9) if (&User-Name =~ / /) { (9) if (&User-Name =~ / /) -> FALSE (9) if (&User-Name =~ /@.*@/ ) { (9) if (&User-Name =~ /@.*@/ ) -> FALSE (9) if (&User-Name =~ /\.\./ ) { (9) if (&User-Name =~ /\.\./ ) -> FALSE (9) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (9) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (9) if (&User-Name =~ /\.$/) { (9) if (&User-Name =~ /\.$/) -> FALSE (9) if (&User-Name =~ /(a)\./) { (9) if (&User-Name =~ /(a)\./) -> FALSE (9) } # policy filter_username = notfound (9) [preprocess] = ok (9) auth_log: EXPAND /usr/local/etc2/freeradius/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (9) auth_log: --> /usr/local/etc2/freeradius/var/log/radius/radacct/xxxxxx/auth-detail-20151119 (9) auth_log: /usr/local/etc2/freeradius/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /usr/local/etc2/freeradius/var/log/radius/radacct/xxxxxx/auth-detail-20151119 (9) auth_log: EXPAND %t (9) auth_log: --> Thu Nov 19 16:13:11 2015 (9) [auth_log] = ok (9) [chap] = noop (9) [mschap] = noop (9) [digest] = noop (9) suffix: Checking for suffix after "@" (9) suffix: Looking up realm "unav.es" for User-Name = "oscarrdg(a)unav.es" (9) suffix: Found realm "~^(.*\.)?unav\.es$" (9) suffix: Adding Stripped-User-Name = "oscarrdg" (9) suffix: Adding Realm = "unav.es" (9) suffix: Authentication realm is LOCAL (9) [suffix] = ok (9) ntdomain: Request already has destination realm set. Ignoring (9) [ntdomain] = noop (9) eap: Peer sent EAP Response (code 2) ID 10 length 6 (9) eap: Continuing tunnel setup (9) [eap] = ok (9) } # authorize = ok (9) Found Auth-Type = EAP (9) # Executing group from file /usr/local/etc2/freeradius/etc/raddb/sites-enabled/default (9) authenticate { (9) eap: Expiring EAP session with state 0x4a7c50d94276497d (9) eap: Finished EAP session with state 0x4a7c50d94276497d (9) eap: Previous EAP request found for state 0x4a7c50d94276497d, released from the list (9) eap: Peer sent packet with method EAP PEAP (25) (9) eap: Calling submodule eap_peap to process data (9) eap_peap: Continuing EAP-TLS (9) eap_peap: Peer ACKed our handshake fragment. handshake is finished (9) eap_peap: [eaptls verify] = success (9) eap_peap: [eaptls process] = success (9) eap_peap: Session established. Decoding tunneled attributes (9) eap_peap: PEAP state TUNNEL ESTABLISHED (9) eap: Sending EAP Request (code 1) ID 11 length 40 (9) eap: EAP session adding &reply:State = 0x4a7c50d94377497d (9) [eap] = handled (9) } # authenticate = handled (9) Using Post-Auth-Type Challenge (9) Post-Auth-Type sub-section not found. Ignoring. (9) # Executing group from file /usr/local/etc2/freeradius/etc/raddb/sites-enabled/default (9) Sent Access-Challenge Id 182 from xxx12.225:1812 to xxxxxx:45903 length 0 (9) EAP-Message = 0x010b00281900170303001d6a2a84ab3ae80e6307de0ca3236f93adbf36e1a25d41545a9a71de0be3 (9) Message-Authenticator = 0x00000000000000000000000000000000 (9) State = 0x4a7c50d94377497df1395bb8ee5037b2 (9) Finished request Waking up in 4.8 seconds. (10) Received Access-Request Id 92 from xxxxxx:45903 to xxx12.225:1812 length 264 (10) User-Name = "oscarrdg(a)unav.es" (10) NAS-IP-Address = xxxxxx (10) NAS-Port = 0 (10) NAS-Identifier = "xxxxxx" (10) NAS-Port-Type = Wireless-802.11 (10) Calling-Station-Id = "344DF73C9C98" (10) Called-Station-Id = "001A1E003250" (10) Service-Type = Framed-User (10) Framed-MTU = 1100 (10) EAP-Message = 0x020b00341900170303002900000000000000019b4ab8036a75b9c14b9fbef72722cf152e7eae150e66cd2df891b0db7b49041513 (10) State = 0x4a7c50d94377497df1395bb8ee5037b2 (10) Aruba-Essid-Name = "eduroam-pre" (10) Aruba-Location-Id = "10.9.1" (10) Aruba-AP-Group = "Amigos" (10) Aruba-Device-Type = "Android" (10) Message-Authenticator = 0x3ed798db1779514513dd6cf8a43755bc (10) session-state: No cached attributes (10) # Executing section authorize from file /usr/local/etc2/freeradius/etc/raddb/sites-enabled/default (10) authorize { (10) policy filter_username { (10) if (!&User-Name) { (10) if (!&User-Name) -> FALSE (10) if (&User-Name =~ / /) { (10) if (&User-Name =~ / /) -> FALSE (10) if (&User-Name =~ /@.*@/ ) { (10) if (&User-Name =~ /@.*@/ ) -> FALSE (10) if (&User-Name =~ /\.\./ ) { (10) if (&User-Name =~ /\.\./ ) -> FALSE (10) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (10) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (10) if (&User-Name =~ /\.$/) { (10) if (&User-Name =~ /\.$/) -> FALSE (10) if (&User-Name =~ /(a)\./) { (10) if (&User-Name =~ /(a)\./) -> FALSE (10) } # policy filter_username = notfound (10) [preprocess] = ok (10) auth_log: EXPAND /usr/local/etc2/freeradius/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (10) auth_log: --> /usr/local/etc2/freeradius/var/log/radius/radacct/xxxxxx/auth-detail-20151119 (10) auth_log: /usr/local/etc2/freeradius/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /usr/local/etc2/freeradius/var/log/radius/radacct/xxxxxx/auth-detail-20151119 (10) auth_log: EXPAND %t (10) auth_log: --> Thu Nov 19 16:13:11 2015 (10) [auth_log] = ok (10) [chap] = noop (10) [mschap] = noop (10) [digest] = noop (10) suffix: Checking for suffix after "@" (10) suffix: Looking up realm "unav.es" for User-Name = "oscarrdg(a)unav.es" (10) suffix: Found realm "~^(.*\.)?unav\.es$" (10) suffix: Adding Stripped-User-Name = "oscarrdg" (10) suffix: Adding Realm = "unav.es" (10) suffix: Authentication realm is LOCAL (10) [suffix] = ok (10) ntdomain: Request already has destination realm set. Ignoring (10) [ntdomain] = noop (10) eap: Peer sent EAP Response (code 2) ID 11 length 52 (10) eap: Continuing tunnel setup (10) [eap] = ok (10) } # authorize = ok (10) Found Auth-Type = EAP (10) # Executing group from file /usr/local/etc2/freeradius/etc/raddb/sites-enabled/default (10) authenticate { (10) eap: Expiring EAP session with state 0x4a7c50d94377497d (10) eap: Finished EAP session with state 0x4a7c50d94377497d (10) eap: Previous EAP request found for state 0x4a7c50d94377497d, released from the list (10) eap: Peer sent packet with method EAP PEAP (25) (10) eap: Calling submodule eap_peap to process data (10) eap_peap: Continuing EAP-TLS (10) eap_peap: [eaptls verify] = ok (10) eap_peap: Done initial handshake (10) eap_peap: [eaptls process] = ok (10) eap_peap: Session established. Decoding tunneled attributes (10) eap_peap: PEAP state WAITING FOR INNER IDENTITY (10) eap_peap: Identity - oscarrdg(a)unav.es (10) eap_peap: Got inner identity 'oscarrdg(a)unav.es' (10) eap_peap: Setting default EAP type for tunneled EAP session (10) eap_peap: Got tunneled request (10) eap_peap: EAP-Message = 0x020b0015016f7363617272646740756e61762e6573 (10) eap_peap: Setting User-Name to oscarrdg(a)unav.es (10) eap_peap: Sending tunneled request to inner-tunnel (10) eap_peap: EAP-Message = 0x020b0015016f7363617272646740756e61762e6573 (10) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (10) eap_peap: User-Name = "oscarrdg(a)unav.es" (10) eap_peap: NAS-IP-Address = xxxxxx (10) eap_peap: NAS-Port = 0 (10) eap_peap: NAS-Identifier = "xxxxxx" (10) eap_peap: NAS-Port-Type = Wireless-802.11 (10) eap_peap: Calling-Station-Id = "344DF73C9C98" (10) eap_peap: Called-Station-Id = "001A1E003250" (10) eap_peap: Service-Type = Framed-User (10) eap_peap: Framed-MTU = 1100 (10) eap_peap: Aruba-Essid-Name = "eduroam-pre" (10) eap_peap: Aruba-Location-Id = "10.9.1" (10) eap_peap: Aruba-AP-Group = "Amigos" (10) eap_peap: Aruba-Device-Type = "Android" (10) eap_peap: Event-Timestamp = "Nov 19 2015 16:13:11 CET" (10) Virtual server inner-tunnel received request (10) EAP-Message = 0x020b0015016f7363617272646740756e61762e6573 (10) FreeRADIUS-Proxied-To = 127.0.0.1 (10) User-Name = "oscarrdg(a)unav.es" (10) NAS-IP-Address = xxxxxx (10) NAS-Port = 0 (10) NAS-Identifier = "xxxxxx" (10) NAS-Port-Type = Wireless-802.11 (10) Calling-Station-Id = "344DF73C9C98" (10) Called-Station-Id = "001A1E003250" (10) Service-Type = Framed-User (10) Framed-MTU = 1100 (10) Aruba-Essid-Name = "eduroam-pre" (10) Aruba-Location-Id = "10.9.1" (10) Aruba-AP-Group = "Amigos" (10) Aruba-Device-Type = "Android" (10) Event-Timestamp = "Nov 19 2015 16:13:11 CET" (10) server inner-tunnel { (10) # Executing section authorize from file /usr/local/etc2/freeradius/etc/raddb/sites-enabled/inner-tunnel (10) authorize { (10) [chap] = noop (10) [mschap] = noop (10) suffix: Checking for suffix after "@" (10) suffix: Looking up realm "unav.es" for User-Name = "oscarrdg(a)unav.es" (10) suffix: Found realm "~^(.*\.)?unav\.es$" (10) suffix: Adding Stripped-User-Name = "oscarrdg" (10) suffix: Adding Realm = "unav.es" (10) suffix: Authentication realm is LOCAL (10) [suffix] = ok (10) ntdomain: Request already has destination realm set. Ignoring (10) [ntdomain] = noop (10) update control { (10) &Proxy-To-Realm := LOCAL (10) } # update control = noop (10) eap: Peer sent EAP Response (code 2) ID 11 length 21 (10) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (10) [eap] = ok (10) } # authorize = ok (10) Found Auth-Type = EAP (10) # Executing group from file /usr/local/etc2/freeradius/etc/raddb/sites-enabled/inner-tunnel (10) authenticate { (10) eap: Peer sent packet with method EAP Identity (1) (10) eap: Calling submodule eap_mschapv2 to process data (10) eap_mschapv2: Issuing Challenge (10) eap: Sending EAP Request (code 1) ID 12 length 43 (10) eap: EAP session adding &reply:State = 0x739669f1739a7348 (10) [eap] = handled (10) } # authenticate = handled (10) } # server inner-tunnel (10) Virtual server sending reply (10) EAP-Message = 0x010c002b1a010c0026109be6bd2966f7837a669e8c6ec412fec8667265657261646975732d332e302e3130 (10) Message-Authenticator = 0x00000000000000000000000000000000 (10) State = 0x739669f1739a7348a02455fb687f2caa (10) eap_peap: Got tunneled reply code 11 (10) eap_peap: EAP-Message = 0x010c002b1a010c0026109be6bd2966f7837a669e8c6ec412fec8667265657261646975732d332e302e3130 (10) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (10) eap_peap: State = 0x739669f1739a7348a02455fb687f2caa (10) eap_peap: Got tunneled reply RADIUS code 11 (10) eap_peap: EAP-Message = 0x010c002b1a010c0026109be6bd2966f7837a669e8c6ec412fec8667265657261646975732d332e302e3130 (10) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (10) eap_peap: State = 0x739669f1739a7348a02455fb687f2caa (10) eap_peap: Got tunneled Access-Challenge (10) eap: Sending EAP Request (code 1) ID 12 length 74 (10) eap: EAP session adding &reply:State = 0x4a7c50d94070497d (10) [eap] = handled (10) } # authenticate = handled (10) Using Post-Auth-Type Challenge (10) Post-Auth-Type sub-section not found. Ignoring. (10) # Executing group from file /usr/local/etc2/freeradius/etc/raddb/sites-enabled/default (10) Sent Access-Challenge Id 92 from xxx12.225:1812 to xxxxxx:45903 length 0 (10) EAP-Message = 0x010c004a1900170303003f6a2a84ab3ae80e6445376747acac3a67092800521bd121ed59a9f1d8a3e4558a30aea29eae313c5e6b4befec0d80e2fbdd0f7c8ce5d3d791f671f36e56facd (10) Message-Authenticator = 0x00000000000000000000000000000000 (10) State = 0x4a7c50d94070497df1395bb8ee5037b2 (10) Finished request Waking up in 4.8 seconds. (11) Received Access-Request Id 240 from xxxxxx:45903 to xxx12.225:1812 length 318 (11) User-Name = "oscarrdg(a)unav.es" (11) NAS-IP-Address = xxxxxx (11) NAS-Port = 0 (11) NAS-Identifier = "xxxxxx" (11) NAS-Port-Type = Wireless-802.11 (11) Calling-Station-Id = "344DF73C9C98" (11) Called-Station-Id = "001A1E003250" (11) Service-Type = Framed-User (11) Framed-MTU = 1100 (11) EAP-Message = 0x020c006a1900170303005f000000000000000253f426d0e803b2f101d786b3751058056be43652b9dfc3ef648ed4fa31005509bd18cfeea0fae8d7c1e20a69507c7355e0f78b6d034f70f812ce1d73e78815d519b082725844b86344c1ae97ccd9d6232d64a6c67831e3 (11) State = 0x4a7c50d94070497df1395bb8ee5037b2 (11) Aruba-Essid-Name = "eduroam-pre" (11) Aruba-Location-Id = "10.9.1" (11) Aruba-AP-Group = "Amigos" (11) Aruba-Device-Type = "Android" (11) Message-Authenticator = 0xfc041f435db6453937530e6ad7ad9998 (11) session-state: No cached attributes (11) # Executing section authorize from file /usr/local/etc2/freeradius/etc/raddb/sites-enabled/default (11) authorize { (11) policy filter_username { (11) if (!&User-Name) { (11) if (!&User-Name) -> FALSE (11) if (&User-Name =~ / /) { (11) if (&User-Name =~ / /) -> FALSE (11) if (&User-Name =~ /@.*@/ ) { (11) if (&User-Name =~ /@.*@/ ) -> FALSE (11) if (&User-Name =~ /\.\./ ) { (11) if (&User-Name =~ /\.\./ ) -> FALSE (11) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (11) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (11) if (&User-Name =~ /\.$/) { (11) if (&User-Name =~ /\.$/) -> FALSE (11) if (&User-Name =~ /(a)\./) { (11) if (&User-Name =~ /(a)\./) -> FALSE (11) } # policy filter_username = notfound (11) [preprocess] = ok (11) auth_log: EXPAND /usr/local/etc2/freeradius/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (11) auth_log: --> /usr/local/etc2/freeradius/var/log/radius/radacct/xxxxxx/auth-detail-20151119 (11) auth_log: /usr/local/etc2/freeradius/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /usr/local/etc2/freeradius/var/log/radius/radacct/xxxxxx/auth-detail-20151119 (11) auth_log: EXPAND %t (11) auth_log: --> Thu Nov 19 16:13:11 2015 (11) [auth_log] = ok (11) [chap] = noop (11) [mschap] = noop (11) [digest] = noop (11) suffix: Checking for suffix after "@" (11) suffix: Looking up realm "unav.es" for User-Name = "oscarrdg(a)unav.es" (11) suffix: Found realm "~^(.*\.)?unav\.es$" (11) suffix: Adding Stripped-User-Name = "oscarrdg" (11) suffix: Adding Realm = "unav.es" (11) suffix: Authentication realm is LOCAL (11) [suffix] = ok (11) ntdomain: Request already has destination realm set. Ignoring (11) [ntdomain] = noop (11) eap: Peer sent EAP Response (code 2) ID 12 length 106 (11) eap: Continuing tunnel setup (11) [eap] = ok (11) } # authorize = ok (11) Found Auth-Type = EAP (11) # Executing group from file /usr/local/etc2/freeradius/etc/raddb/sites-enabled/default (11) authenticate { (11) eap: Expiring EAP session with state 0x739669f1739a7348 (11) eap: Finished EAP session with state 0x4a7c50d94070497d (11) eap: Previous EAP request found for state 0x4a7c50d94070497d, released from the list (11) eap: Peer sent packet with method EAP PEAP (25) (11) eap: Calling submodule eap_peap to process data (11) eap_peap: Continuing EAP-TLS (11) eap_peap: [eaptls verify] = ok (11) eap_peap: Done initial handshake (11) eap_peap: [eaptls process] = ok (11) eap_peap: Session established. Decoding tunneled attributes (11) eap_peap: PEAP state phase2 (11) eap_peap: EAP method MSCHAPv2 (26) (11) eap_peap: Got tunneled request (11) eap_peap: EAP-Message = 0x020c004b1a020c00463116ba4ea3b0d512edfb61cc1111d4f2310000000000000000d4ced6b15b809861069531ec2cb89e3001db98c94f9018e8006f7363617272646740756e61762e6573 (11) eap_peap: Setting User-Name to oscarrdg(a)unav.es (11) eap_peap: Sending tunneled request to inner-tunnel (11) eap_peap: EAP-Message = 0x020c004b1a020c00463116ba4ea3b0d512edfb61cc1111d4f2310000000000000000d4ced6b15b809861069531ec2cb89e3001db98c94f9018e8006f7363617272646740756e61762e6573 (11) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (11) eap_peap: User-Name = "oscarrdg(a)unav.es" (11) eap_peap: State = 0x739669f1739a7348a02455fb687f2caa (11) eap_peap: NAS-IP-Address = xxxxxx (11) eap_peap: NAS-Port = 0 (11) eap_peap: NAS-Identifier = "xxxxxx" (11) eap_peap: NAS-Port-Type = Wireless-802.11 (11) eap_peap: Calling-Station-Id = "344DF73C9C98" (11) eap_peap: Called-Station-Id = "001A1E003250" (11) eap_peap: Service-Type = Framed-User (11) eap_peap: Framed-MTU = 1100 (11) eap_peap: Aruba-Essid-Name = "eduroam-pre" (11) eap_peap: Aruba-Location-Id = "10.9.1" (11) eap_peap: Aruba-AP-Group = "Amigos" (11) eap_peap: Aruba-Device-Type = "Android" (11) eap_peap: Event-Timestamp = "Nov 19 2015 16:13:11 CET" (11) Virtual server inner-tunnel received request (11) EAP-Message = 0x020c004b1a020c00463116ba4ea3b0d512edfb61cc1111d4f2310000000000000000d4ced6b15b809861069531ec2cb89e3001db98c94f9018e8006f7363617272646740756e61762e6573 (11) FreeRADIUS-Proxied-To = 127.0.0.1 (11) User-Name = "oscarrdg(a)unav.es" (11) State = 0x739669f1739a7348a02455fb687f2caa (11) NAS-IP-Address = xxxxxx (11) NAS-Port = 0 (11) NAS-Identifier = "xxxxxx" (11) NAS-Port-Type = Wireless-802.11 (11) Calling-Station-Id = "344DF73C9C98" (11) Called-Station-Id = "001A1E003250" (11) Service-Type = Framed-User (11) Framed-MTU = 1100 (11) Aruba-Essid-Name = "eduroam-pre" (11) Aruba-Location-Id = "10.9.1" (11) Aruba-AP-Group = "Amigos" (11) Aruba-Device-Type = "Android" (11) Event-Timestamp = "Nov 19 2015 16:13:11 CET" (11) server inner-tunnel { (11) session-state: No cached attributes (11) # Executing section authorize from file /usr/local/etc2/freeradius/etc/raddb/sites-enabled/inner-tunnel (11) authorize { (11) [chap] = noop (11) [mschap] = noop (11) suffix: Checking for suffix after "@" (11) suffix: Looking up realm "unav.es" for User-Name = "oscarrdg(a)unav.es" (11) suffix: Found realm "~^(.*\.)?unav\.es$" (11) suffix: Adding Stripped-User-Name = "oscarrdg" (11) suffix: Adding Realm = "unav.es" (11) suffix: Authentication realm is LOCAL (11) [suffix] = ok (11) ntdomain: Request already has destination realm set. Ignoring (11) [ntdomain] = noop (11) update control { (11) &Proxy-To-Realm := LOCAL (11) } # update control = noop (11) eap: Peer sent EAP Response (code 2) ID 12 length 75 (11) eap: No EAP Start, assuming it's an on-going EAP conversation (11) [eap] = updated (11) policy unav.authorize.inner { (11) if ( "%{client:group}" == 'wireless' ) { (11) EXPAND %{client:group} (11) --> wireless (11) if ( "%{client:group}" == 'wireless' ) -> TRUE (11) if ( "%{client:group}" == 'wireless' ) { (11) policy unav.reject.otherdomain { (11) if ( Realm == "NULL" || Realm =~ /^(.*\.)?unav\.es$/ || Realm == "UNAV-PDC-01" ) { (11) if ( Realm == "NULL" || Realm =~ /^(.*\.)?unav\.es$/ || Realm == "UNAV-PDC-01" ) -> TRUE (11) ( Realm == "NULL" || Realm =~ /^(.*\.)?unav\.es$/ || Realm == "UNAV-PDC-01" ) { ... } # empty sub-section is ignored (11) ... skipping else for request 11: Preceding "if" was taken (11) } # policy unav.reject.otherdomain = updated (11) policy unav.reject.bloqueado { (11) if ( Ldap-Group == "unav.radius.bloqueado" ) { (11) Searching for user in group "unav.radius.bloqueado" rlm_ldap (ldap): Reserved connection (0) (11) EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (11) --> (uid=oscarrdg) (11) Performing search in "ou=radius,o=accounts,dc=unav,dc=es" with filter "(uid=oscarrdg)", scope "sub" (11) Waiting for search result... (11) User object found at DN "uid=oscarrdg,ou=radius,o=accounts,dc=unav,dc=es" (11) Checking user object's member attributes (11) Performing unfiltered search in "uid=oscarrdg,ou=radius,o=accounts,dc=unav,dc=es", scope "base" (11) Waiting for search result... (11) Processing member value "uid=unav.radius.vpn.ssl,ou=groups,ou=radius,o=accounts,dc=unav,dc=es" as a DN (11) Resolving group DN "uid=unav.radius.vpn.ssl,ou=groups,ou=radius,o=accounts,dc=unav,dc=es" to group name (11) Performing unfiltered search in "uid=unav.radius.vpn.ssl,ou=groups,ou=radius,o=accounts,dc=unav,dc=es", scope "base" (11) Waiting for search result... (11) Group DN "uid=unav.radius.vpn.ssl,ou=groups,ou=radius,o=accounts,dc=unav,dc=es" resolves to name "unav.radius.vpn.ssl" (11) Processing member value "uid=unav.radius.eapol.n1,ou=groups,ou=radius,o=accounts,dc=unav,dc=es" as a DN (11) Resolving group DN "uid=unav.radius.eapol.n1,ou=groups,ou=radius,o=accounts,dc=unav,dc=es" to group name (11) Performing unfiltered search in "uid=unav.radius.eapol.n1,ou=groups,ou=radius,o=accounts,dc=unav,dc=es", scope "base" (11) Waiting for search result... (11) Group DN "uid=unav.radius.eapol.n1,ou=groups,ou=radius,o=accounts,dc=unav,dc=es" resolves to name "unav.radius.eapol.n1" (11) Processing member value "uid=unav.radius.wifi.n1,ou=groups,ou=radius,o=accounts,dc=unav,dc=es" as a DN (11) Resolving group DN "uid=unav.radius.wifi.n1,ou=groups,ou=radius,o=accounts,dc=unav,dc=es" to group name (11) Performing unfiltered search in "uid=unav.radius.wifi.n1,ou=groups,ou=radius,o=accounts,dc=unav,dc=es", scope "base" (11) Waiting for search result... (11) Group DN "uid=unav.radius.wifi.n1,ou=groups,ou=radius,o=accounts,dc=unav,dc=es" resolves to name "unav.radius.wifi.n1" (11) Processing member value "uid=unav.radius.vpn.ssl.si,ou=groups,ou=radius,o=accounts,dc=unav,dc=es" as a DN (11) Resolving group DN "uid=unav.radius.vpn.ssl.si,ou=groups,ou=radius,o=accounts,dc=unav,dc=es" to group name (11) Performing unfiltered search in "uid= unav.radius.vpn.ssl.si,ou=groups,ou=radius,o=accounts,dc=unav,dc=es", scope "base" (11) Waiting for search result... (11) Group DN "uid=unav.radius.vpn.ssl.si,ou=groups,ou=radius,o=accounts,dc=unav,dc=es" resolves to name "unav.radius.vpn.ssl.si" (11) Processing member value "uid=unav.radius.vpn.ipsec,ou=groups,ou=radius,o=accounts,dc=unav,dc=es" as a DN (11) Resolving group DN "uid=unav.radius.vpn.ipsec,ou=groups,ou=radius,o=accounts,dc=unav,dc=es" to group name (11) Performing unfiltered search in "uid=unav.radius.vpn.ipsec,ou=groups,ou=radius,o=accounts,dc=unav,dc=es", scope "base" (11) Waiting for search result... (11) Group DN "uid=unav.radius.vpn.ipsec,ou=groups,ou=radius,o=accounts,dc=unav,dc=es" resolves to name "unav.radius.vpn.ipsec" rlm_ldap (ldap): Released connection (0) rlm_ldap (ldap): Need 5 more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots used rlm_ldap (ldap): Connecting to ldap://ldap.unav.es:389 TLS: certificate [CN=AddTrust External CA Root,OU=AddTrust External TTP Network,O=AddTrust AB,C=SE] is not valid - error -8172:Peer's certificate issuer has been marked as not trusted by the user.. rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (11) User is not a member of "unav.radius.bloqueado" (11) if ( Ldap-Group == "unav.radius.bloqueado" ) -> FALSE (11) } # policy unav.reject.bloqueado = updated rlm_ldap (ldap): Reserved connection (1) (11) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (11) ldap: --> (uid=oscarrdg) (11) ldap: Performing search in "ou=radius,o=accounts,dc=unav,dc=es" with filter "(uid=oscarrdg)", scope "sub" (11) ldap: Waiting for search result... (11) ldap: User object found at DN "uid=oscarrdg,ou=radius,o=accounts,dc=unav,dc=es" (11) ldap: Processing user attributes (11) ldap: control:Password-With-Header += '{sha}0sURRyN1nxp/BMx+Q5nBqwR7CB0=' rlm_ldap (ldap): Released connection (1) (11) [ldap] = updated (11) update reply { (11) EXPAND %{request:User-Name} (11) --> oscarrdg(a)unav.es (11) &User-Name = oscarrdg(a)unav.es (11) } # update reply = noop (11) if ( Ldap-Group == "unav.radius.wifi.all" ) { (11) Searching for user in group "unav.radius.wifi.all" rlm_ldap (ldap): Reserved connection (2) (11) Using user DN from request "uid=oscarrdg,ou=radius,o=accounts,dc=unav,dc=es" (11) Checking user object's member attributes (11) Performing unfiltered search in "uid=oscarrdg,ou=radius,o=accounts,dc=unav,dc=es", scope "base" (11) Waiting for search result... (11) Processing member value "uid=unav.radius.vpn.ssl,ou=groups,ou=radius,o=accounts,dc=unav,dc=es" as a DN (11) Resolving group DN "uid=unav.radius.vpn.ssl,ou=groups,ou=radius,o=accounts,dc=unav,dc=es" to group name (11) Performing unfiltered search in "uid=unav.radius.vpn.ssl,ou=groups,ou=radius,o=accounts,dc=unav,dc=es", scope "base" (11) Waiting for search result... (11) Group DN "uid=unav.radius.vpn.ssl,ou=groups,ou=radius,o=accounts,dc=unav,dc=es" resolves to name "unav.radius.vpn.ssl" (11) Processing member value "uid=unav.radius.eapol.n1,ou=groups,ou=radius,o=accounts,dc=unav,dc=es" as a DN (11) Resolving group DN "uid=unav.radius.eapol.n1,ou=groups,ou=radius,o=accounts,dc=unav,dc=es" to group name (11) Performing unfiltered search in "uid=unav.radius.eapol.n1,ou=groups,ou=radius,o=accounts,dc=unav,dc=es", scope "base" (11) Waiting for search result... (11) Group DN "uid=unav.radius.eapol.n1,ou=groups,ou=radius,o=accounts,dc=unav,dc=es" resolves to name "unav.radius.eapol.n1" (11) Processing member value "uid=unav.radius.wifi.n1,ou=groups,ou=radius,o=accounts,dc=unav,dc=es" as a DN (11) Resolving group DN "uid=unav.radius.wifi.n1,ou=groups,ou=radius,o=accounts,dc=unav,dc=es" to group name (11) Performing unfiltered search in "uid=unav.radius.wifi.n1,ou=groups,ou=radius,o=accounts,dc=unav,dc=es", scope "base" (11) Waiting for search result... (11) Group DN "uid=unav.radius.wifi.n1,ou=groups,ou=radius,o=accounts,dc=unav,dc=es" resolves to name "unav.radius.wifi.n1" (11) Processing member value "uid=unav.radius.vpn.ssl.si,ou=groups,ou=radius,o=accounts,dc=unav,dc=es" as a DN (11) Resolving group DN "uid=unav.radius.vpn.ssl.si,ou=groups,ou=radius,o=accounts,dc=unav,dc=es" to group name (11) Performing unfiltered search in "uid=unav.radius.vpn.ssl.si,ou=groups,ou=radius,o=accounts,dc=unav,dc=es", scope "base" (11) Waiting for search result... (11) Group DN "uid=unav.radius.vpn.ssl.si,ou=groups,ou=radius,o=accounts,dc=unav,dc=es" resolves to name "unav.radius.vpn.ssl.si" (11) Processing member value "uid=unav.radius.vpn.ipsec,ou=groups,ou=radius,o=accounts,dc=unav,dc=es" as a DN (11) Resolving group DN "uid=unav.radius.vpn.ipsec,ou=groups,ou=radius,o=accounts,dc=unav,dc=es" to group name (11) Performing unfiltered search in "uid=unav.radius.vpn.ipsec,ou=groups,ou=radius,o=accounts,dc=unav,dc=es", scope "base" (11) Waiting for search result... (11) Group DN "uid=unav.radius.vpn.ipsec,ou=groups,ou=radius,o=accounts,dc=unav,dc=es" resolves to name "unav.radius.vpn.ipsec" rlm_ldap (ldap): Released connection (2) (11) User is not a member of "unav.radius.wifi.all" (11) if ( Ldap-Group == "unav.radius.wifi.all" ) -> FALSE (11) elsif ( Ldap-Group == "unav.radius.wifi.n1" ) { (11) Searching for user in group "unav.radius.wifi.n1" rlm_ldap (ldap): Reserved connection (3) (11) Using user DN from request "uid=oscarrdg,ou=radius,o=accounts,dc=unav,dc=es" (11) Checking user object's member attributes (11) Performing unfiltered search in "uid=oscarrdg,ou=radius,o=accounts,dc=unav,dc=es", scope "base" (11) Waiting for search result... (11) Processing member value "uid=unav.radius.vpn.ssl,ou=groups,ou=radius,o=accounts,dc=unav,dc=es" as a DN (11) Resolving group DN "uid=unav.radius.vpn.ssl,ou=groups,ou=radius,o=accounts,dc=unav,dc=es" to group name (11) Performing unfiltered search in "uid=unav.radius.vpn.ssl,ou=groups,ou=radius,o=accounts,dc=unav,dc=es", scope "base" (11) Waiting for search result... (11) Group DN "uid=unav.radius.vpn.ssl,ou=groups,ou=radius,o=accounts,dc=unav,dc=es" resolves to name "unav.radius.vpn.ssl" (11) Processing member value "uid=unav.radius.eapol.n1,ou=groups,ou=radius,o=accounts,dc=unav,dc=es" as a DN (11) Resolving group DN "uid=unav.radius.eapol.n1,ou=groups,ou=radius,o=accounts,dc=unav,dc=es" to group name (11) Performing unfiltered search in "uid=unav.radius.eapol.n1,ou=groups,ou=radius,o=accounts,dc=unav,dc=es", scope "base" (11) Waiting for search result... (11) Group DN "uid=unav.radius.eapol.n1,ou=groups,ou=radius,o=accounts,dc=unav,dc=es" resolves to name "unav.radius.eapol.n1" (11) Processing member value "uid=unav.radius.wifi.n1,ou=groups,ou=radius,o=accounts,dc=unav,dc=es" as a DN (11) Resolving group DN "uid=unav.radius.wifi.n1,ou=groups,ou=radius,o=accounts,dc=unav,dc=es" to group name (11) Performing unfiltered search in "uid=unav.radius.wifi.n1,ou=groups,ou=radius,o=accounts,dc=unav,dc=es", scope "base" (11) Waiting for search result... (11) Group DN "uid=unav.radius.wifi.n1,ou=groups,ou=radius,o=accounts,dc=unav,dc=es" resolves to name "unav.radius.wifi.n1" (11) User found in group "unav.radius.wifi.n1". Comparison between membership: name (resolved from DN "uid=unav.radius.wifi.n1,ou=groups,ou=radius,o=accounts,dc=unav,d?"), check: name rlm_ldap (ldap): Released connection (3) (11) elsif ( Ldap-Group == "unav.radius.wifi.n1" ) -> TRUE (11) elsif ( Ldap-Group == "unav.radius.wifi.n1" ) { (11) update reply { (11) &Reply-Message += 'role.n1' (11) &Aruba-User-Role := 'role.n1' (11) } # update reply = noop (11) } # elsif ( Ldap-Group == "unav.radius.wifi.n1" ) = noop (11) ... skipping elsif for request 11: Preceding "if" was taken (11) ... skipping elsif for request 11: Preceding "if" was taken (11) ... skipping elsif for request 11: Preceding "if" was taken (11) ... skipping elsif for request 11: Preceding "if" was taken (11) ... skipping elsif for request 11: Preceding "if" was taken (11) ... skipping elsif for request 11: Preceding "if" was taken (11) ... skipping elsif for request 11: Preceding "if" was taken (11) ... skipping else for request 11: Preceding "if" was taken (11) } # if ( "%{client:group}" == 'wireless' ) = updated (11) ... skipping elsif for request 11: Preceding "if" was taken (11) ... skipping elsif for request 11: Preceding "if" was taken (11) ... skipping else for request 11: Preceding "if" was taken (11) } # policy unav.authorize.inner = updated (11) [expiration] = noop (11) [logintime] = noop (11) pap: Converted: Password-With-Header -> SHA1-Password (11) pap: Removing &control:Password-With-Header (11) pap: Normalizing SHA1-Password from base64 encoding, 28 bytes -> 20 bytes (11) pap: WARNING: Auth-Type already set. Not setting to PAP (11) [pap] = noop (11) if (control:Cleartext-Password) { (11) if (control:Cleartext-Password) -> FALSE (11) } # authorize = updated (11) Found Auth-Type = EAP (11) # Executing group from file /usr/local/etc2/freeradius/etc/raddb/sites-enabled/inner-tunnel (11) authenticate { (11) eap: Expiring EAP session with state 0x739669f1739a7348 (11) eap: Finished EAP session with state 0x739669f1739a7348 (11) eap: Previous EAP request found for state 0x739669f1739a7348, released from the list (11) eap: Peer sent packet with method EAP MSCHAPv2 (26) (11) eap: Calling submodule eap_mschapv2 to process data (11) eap_mschapv2: # Executing group from file /usr/local/etc2/freeradius/etc/raddb/sites-enabled/inner-tunnel (11) eap_mschapv2: Auth-Type MS-CHAP { (11) mschap: Creating challenge hash with username: oscarrdg(a)unav.es (11) mschap: Client is using MS-CHAPv2 (11) mschap: Executing: /usr/bin/ntlm_auth --request-nt-key --username=%{%{Stripped-User-Name}:-%{%{User-Name}:-None}} --challenge=%{%{mschap:Challenge}:-00} --nt-response=%{%{mschap:NT-Response}:-00}: (11) mschap: EXPAND --username=%{%{Stripped-User-Name}:-%{%{User-Name}:-None}} (11) mschap: --> --username=oscarrdg (11) mschap: Creating challenge hash with username: oscarrdg(a)unav.es (11) mschap: EXPAND --challenge=%{%{mschap:Challenge}:-00} (11) mschap: --> --challenge=c159f634076ecce6 (11) mschap: EXPAND --nt-response=%{%{mschap:NT-Response}:-00} (11) mschap: --> --nt-response=d4ced6b15b809861069531ec2cb89e3001db98c94f9018e8 (11) mschap: Program returned code (0) and output 'NT_KEY: 751E91FBC94E37990A2A5B973C29E4D3' (11) mschap: Adding MS-CHAPv2 MPPE keys (11) [mschap] = ok (11) } # Auth-Type MS-CHAP = ok (11) MSCHAP Success (11) eap: Sending EAP Request (code 1) ID 13 length 51 (11) eap: EAP session adding &reply:State = 0x739669f1729b7348 (11) [eap] = handled (11) } # authenticate = handled (11) } # server inner-tunnel (11) Virtual server sending reply (11) User-Name = "oscarrdg(a)unav.es" (11) Reply-Message += "role.n1" (11) Aruba-User-Role := "role.n1" (11) EAP-Message = 0x010d00331a030c002e533d38443639364430423633413735314239363137343538304636313145354531323335434636443942 (11) Message-Authenticator = 0x00000000000000000000000000000000 (11) State = 0x739669f1729b7348a02455fb687f2caa (11) eap_peap: Got tunneled reply code 11 (11) eap_peap: User-Name = "oscarrdg(a)unav.es" (11) eap_peap: Reply-Message += "role.n1" (11) eap_peap: Aruba-User-Role := "role.n1" (11) eap_peap: EAP-Message = 0x010d00331a030c002e533d38443639364430423633413735314239363137343538304636313145354531323335434636443942 (11) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (11) eap_peap: State = 0x739669f1729b7348a02455fb687f2caa (11) eap_peap: Got tunneled reply RADIUS code 11 (11) eap_peap: User-Name = "oscarrdg(a)unav.es" (11) eap_peap: Reply-Message += "role.n1" (11) eap_peap: Aruba-User-Role := "role.n1" (11) eap_peap: EAP-Message = 0x010d00331a030c002e533d38443639364430423633413735314239363137343538304636313145354531323335434636443942 (11) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (11) eap_peap: State = 0x739669f1729b7348a02455fb687f2caa (11) eap_peap: Got tunneled Access-Challenge (11) eap: Sending EAP Request (code 1) ID 13 length 82 (11) eap: EAP session adding &reply:State = 0x4a7c50d94171497d (11) [eap] = handled (11) } # authenticate = handled (11) Using Post-Auth-Type Challenge (11) Post-Auth-Type sub-section not found. Ignoring. (11) # Executing group from file /usr/local/etc2/freeradius/etc/raddb/sites-enabled/default (11) Sent Access-Challenge Id 240 from xxx:1812 to xxxxxx:45903 length 0 (11) EAP-Message = 0x010d0052190017030300476a2a84ab3ae80e65df331667562db833be49b2c3281f498c160a1da57850e4c4db22bfebfcec126265d589bbfe90d31b5ded9e845dd71e0e30a7911af58f1d022b04703a397886 (11) Message-Authenticator = 0x00000000000000000000000000000000 (11) State = 0x4a7c50d94171497df1395bb8ee5037b2 (11) Finished request Waking up in 4.7 seconds. *Oscar Remírez de Ganuza Satrústegui* IT Services Universidad de Navarra Tel. +34 948425600 x803130 http://www.unav.edu/web/it/

4 9

"TLS section "tls" missing, trying to use legacy configuration" log message in 3.0.10
by Thomas Stather 25 Feb '16

25 Feb '16

Hi I am seeing the following in my radius (3.0.10) log: ... Tue Feb 23 11:23:13 2016 : Info: rlm_ldap: libldap vendor: OpenLDAP, version: 20439 Tue Feb 23 11:23:13 2016 : Info: TLS section "tls" missing, trying to use legacy configuration ... However, i have the "tls" section in my /mods-enabled/ldap config file: tls { start_tls = yes ca_file = /etc/ssl/certs/ca-bundle.pem require_cert = "demand" } What am i doing wrong? Best, Thomas -- Thomas Stather IT Services Tel: +49 6221-486 628 Fax: +49 6221-486 561 ------------------------------------------------------------------------ Max Planck Institute for Medical Research (MPImF) Jahnstrasse 29, 69120 Heidelberg Germany

2 2

Attempting to use the
by Alex Sharaz 24 Feb '16

24 Feb '16

In mods-available/mschap ..... FR 3.0.11 # An alternative to using ntlm_auth is to connect to the # winbind daemon directly for authentication. This option # is likely to be faster and may be useful on busy systems, # but is less well tested. # # Using this option requires libwbclient from Samba 4.2.1 # or later to be installed. Make sure that ntlm_auth above is # commented out. # winbind_username = "%{mschap:User-Name}" winbind_domain = "%{mschap:NT-Domain}" So I'm building a FR package and have tried to use the above config, but I get 'winbind' auth not enabled at compiled time when I try and start FR. Looks like configure ran with $ ./configure --build x86_64-linux-gnu --config-cache --disable-developer --disable-openssl-version-check --prefix=/usr --exec-prefix=/usr --mandir=/usr/share/man --sysconfdir=/etc --libdir=/usr/lib/freeradius --datadir=/usr/share --localstatedir=/var --with-raddbdir=/etc/freeradius --with-logdir=/var/log/freeradius --with-large-files --with-udpfromto --without-rlm_eap_tnc --with-rlm_sql_postgresql_lib_dir=/usr/lib --with-rlm_sql_postgresql_include_dir=/usr/include/postgresql --with-iodbc-include-dir=/usr/include/iodbc --without-rlm_eap_ikev2 --without-rlm_sql_oracle --without-rlm_sql_unixodbc What do I add to add winbind auth? What I actually ran was dpkg-buildpackage -b -uc I've got samba-dev installed and libwbclient is installed Rgds Alex

3 2

IPv6 address allocating.
by koch＠inbox.lv 24 Feb '16

24 Feb '16

Good day. Does exist any freeradius modules for subj.? Or I'll need to write my own one? :) Thanks for the answer.

3 2

upgrade freeradius vom 2.1.12 to 3.0.x
by Kiefer, Jonas 24 Feb '16

24 Feb '16

Hello freeradius-users, iam seaching for a how to tutorial to upgrade my freeradius server from the version 2.1.12 to 3.0.x. iam using ubuntu 14.04 lts and also tried it with apt-get update & upgrade. But in this case there are nothing new stuff to update for me. How can i do it? Best regards Jonas

3 2

Dynamic User Help
by J Kephart 24 Feb '16

24 Feb '16

We provide AAA services to a variety of client businesses across North America, and we use FreeRADIUS as the final piece of our authentication process. Because our clients' customers are unknown until they attempt to connect to the network, all user radius credentials are created dynamically, after an initial authentication via another method (typically, credit card charges, access codes, etc.); once that initial auth is complete, we create a credential using the user devices' MAC address to ensure uniqueness, and to facilitate the MAC auth feature of the gateway devices we employ, which permits immediate reconnection following idle time-out without having to open a browser (a limitation of the gateway devices). Of concern to us is that we don't want a user to authenticate in one place of business for which we provide service, then move to another client site, at which MAC authentication is enabled, and have the device automatically connected at the second location. This is mainly due to differences in service offerings at different client sites. What we're looking to do is create an additional table in the radius database. That table would contain the following fields: id primary table key callingstationid self-explanatory nasid identifies the specific site the user is at, and corresponds to our own internal site id nasportid the vlan the user is in groupname the group to which the user is assigned in radusergroup As we create each user's credentials, we'll populate this new table with the information indicated. For each VLAN the user connects to, there would be a separate row so that, as he moves from vlan to vlan, we can update the group assignment in radusergroup so that he'd get the proper group attributes. Does this sound like something that could work? If so, I need a bit of help understanding where we'd put the table query (and the construction of it) in whichever file it should be in (e.g., sites-enabled/default?). The goal is to perform the query, and if there's a corresponding row match, do an update on the username in radusergroup to set the proper group id, and then continue normal processing; if there is no match, we'd simply reject the connection, which would force the gateway to redirect to a captive portal server for initial authentication, as described above). For me, the sticking point is where and how to put the SQL query, so I'd appreciate any pointers I can get. And, too, if there's a better way of doing this, I'd welcome any advice! I hope I've provided enough information to start. Many thanks in advance! Jim

2 7