- Freeradius-Users - lists.freeradius.org

Odd issue with EAP-TTLS... Tunneled challenge invalid?
by Stefan Paetow 25 Aug '15

25 Aug '15

Hi, One of our sites has run into an issue where they are trying to connect to their server with EAP-TTLS. They've used rad_eap_test on the same machine just to test the connection locally and this is the output log. I'm stumped... I've never seen this error before. Any suggestions will be most appreciated! :-) -- debug log follows -- freeradius -fxx -l stdout Copyright (C) 1999-2015 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/dictionary including configuration file /etc/freeradius/radiusd.conf including configuration file /etc/freeradius/proxy.conf including configuration file /etc/freeradius/clients.conf including files in directory /etc/freeradius/mods-enabled/ including configuration file /etc/freeradius/mods-enabled/realm including configuration file /etc/freeradius/mods-enabled/chap including configuration file /etc/freeradius/mods-enabled/preprocess including configuration file /etc/freeradius/mods-enabled/expr including configuration file /etc/freeradius/mods-enabled/expiration including configuration file /etc/freeradius/mods-enabled/soh including configuration file /etc/freeradius/mods-enabled/pap including configuration file /etc/freeradius/mods-enabled/ntlm_auth including configuration file /etc/freeradius/mods-enabled/dhcp including configuration file /etc/freeradius/mods-enabled/digest including configuration file /etc/freeradius/mods-enabled/utf8 including configuration file /etc/freeradius/mods-enabled/attr_filter including configuration file /etc/freeradius/mods-enabled/unix including configuration file /etc/freeradius/mods-enabled/sradutmp including configuration file /etc/freeradius/mods-enabled/eap including configuration file /etc/freeradius/mods-enabled/mschap including configuration file /etc/freeradius/mods-enabled/detail.log including configuration file /etc/freeradius/mods-enabled/logintime including configuration file /etc/freeradius/mods-enabled/detail including configuration file /etc/freeradius/mods-enabled/always including configuration file /etc/freeradius/mods-enabled/radutmp including configuration file /etc/freeradius/mods-enabled/cache_eap including configuration file /etc/freeradius/mods-enabled/unpack including configuration file /etc/freeradius/mods-enabled/dynamic_clients including configuration file /etc/freeradius/mods-enabled/replicate including configuration file /etc/freeradius/mods-enabled/exec including configuration file /etc/freeradius/mods-enabled/echo including configuration file /etc/freeradius/mods-enabled/files including configuration file /etc/freeradius/mods-enabled/passwd including configuration file /etc/freeradius/mods-enabled/linelog including files in directory /etc/freeradius/policy.d/ including configuration file /etc/freeradius/policy.d/debug including configuration file /etc/freeradius/policy.d/canonicalization including configuration file /etc/freeradius/policy.d/abfab-tr including configuration file /etc/freeradius/policy.d/dhcp including configuration file /etc/freeradius/policy.d/cui including configuration file /etc/freeradius/policy.d/control including configuration file /etc/freeradius/policy.d/eap including configuration file /etc/freeradius/policy.d/filter including configuration file /etc/freeradius/policy.d/operator-name including configuration file /etc/freeradius/policy.d/accounting including files in directory /etc/freeradius/sites-enabled/ including configuration file /etc/freeradius/sites-enabled/abfab-tls including configuration file /etc/freeradius/sites-enabled/abfab-tr-idp including configuration file /etc/freeradius/sites-enabled/inner-tunnel including configuration file /etc/freeradius/sites-enabled/default including configuration file /etc/freeradius/sites-enabled/channel_bindings main { security { user = "freerad" group = "freerad" allow_core_dumps = no } } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dynamic = yes dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } realm muj.prostor { } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = digest radiusd: #### Instantiating modules #### instantiate { } modules { # Loaded module rlm_realm # Instantiating module "IPASS" from file /etc/freeradius/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no default_community = "none" rp_realm = "none" trust_router = "none" tr_port = 0 } Warning: dh_check failed with 8 : the g value is not a generator # Instantiating module "suffix" from file /etc/freeradius/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no default_community = "apc.moonshot.ja.net" rp_realm = "painless-security.com" trust_router = "localhost" tr_port = 0 } # Instantiating module "realmpercent" from file /etc/freeradius/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no default_community = "none" rp_realm = "none" trust_router = "none" tr_port = 0 } # Instantiating module "ntdomain" from file /etc/freeradius/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no default_community = "none" rp_realm = "none" trust_router = "none" tr_port = 0 } # Loaded module rlm_chap # Instantiating module "chap" from file /etc/freeradius/mods-enabled/chap # Loaded module rlm_preprocess # Instantiating module "preprocess" from file /etc/freeradius/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } reading pairlist file /etc/freeradius/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/mods-config/preprocess/hints # Loaded module rlm_expr # Instantiating module "expr" from file /etc/freeradius/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_expiration # Instantiating module "expiration" from file /etc/freeradius/mods-enabled/expiration # Loaded module rlm_soh # Instantiating module "soh" from file /etc/freeradius/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_pap # Instantiating module "pap" from file /etc/freeradius/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_exec # Instantiating module "ntlm_auth" from file /etc/freeradius/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_dhcp # Instantiating module "dhcp" from file /etc/freeradius/mods-enabled/dhcp # Loaded module rlm_digest # Instantiating module "digest" from file /etc/freeradius/mods-enabled/digest # Loaded module rlm_utf8 # Instantiating module "utf8" from file /etc/freeradius/mods-enabled/utf8 # Loaded module rlm_attr_filter # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } reading pairlist file /etc/freeradius/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } reading pairlist file /etc/freeradius/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } reading pairlist file /etc/freeradius/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } reading pairlist file /etc/freeradius/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } reading pairlist file /etc/freeradius/mods-config/attr_filter/accounting_response # Loaded module rlm_unix # Instantiating module "unix" from file /etc/freeradius/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } # Loaded module rlm_radutmp # Instantiating module "sradutmp" from file /etc/freeradius/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_eap # Instantiating module "eap" from file /etc/freeradius/mods-enabled/eap eap { default_eap_type = "ttls" timer_expire = 60 ignore_unknown_eap_types = no mod_accounting_username_bug = no max_sessions = 1024 } # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 ca_path = "/etc/freeradius/certs" pem_file_type = yes private_key_file = "/etc/freeradius/certs/server.pem" certificate_file = "/etc/freeradius/certs/server.pem" ca_file = "/etc/freeradius/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/freeradius/certs/dh" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" ecdh_curve = "prime256v1" cache { enable = yes lifetime = 24 max_entries = 255 } verify { } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_method = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Loaded module rlm_mschap # Instantiating module "mschap" from file /etc/freeradius/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes } # Loaded module rlm_detail # Instantiating module "auth_log" from file /etc/freeradius/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Instantiating module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Instantiating module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_logintime # Instantiating module "logintime" from file /etc/freeradius/mods-enabled/logintime logintime { minimum_timeout = 60 } # Instantiating module "detail" from file /etc/freeradius/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_always # Instantiating module "reject" from file /etc/freeradius/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Instantiating module "fail" from file /etc/freeradius/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Instantiating module "ok" from file /etc/freeradius/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Instantiating module "handled" from file /etc/freeradius/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Instantiating module "invalid" from file /etc/freeradius/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Instantiating module "userlock" from file /etc/freeradius/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Instantiating module "notfound" from file /etc/freeradius/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Instantiating module "noop" from file /etc/freeradius/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Instantiating module "updated" from file /etc/freeradius/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Instantiating module "radutmp" from file /etc/freeradius/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_cache # Instantiating module "cache_eap" from file /etc/freeradius/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Loaded module rlm_unpack # Instantiating module "unpack" from file /etc/freeradius/mods-enabled/unpack # Loaded module rlm_dynamic_clients # Instantiating module "dynamic_clients" from file /etc/freeradius/mods-enabled/dynamic_clients # Loaded module rlm_replicate # Instantiating module "replicate" from file /etc/freeradius/mods-enabled/replicate # Instantiating module "exec" from file /etc/freeradius/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Instantiating module "echo" from file /etc/freeradius/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_files # Instantiating module "files" from file /etc/freeradius/mods-enabled/files files { filename = "/etc/freeradius/mods-config/files/authorize" usersfile = "/etc/freeradius/mods-config/files/authorize" acctusersfile = "/etc/freeradius/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/mods-config/files/pre-proxy" compat = "cistron" } reading pairlist file /etc/freeradius/mods-config/files/authorize [/etc/freeradius/mods-config/files/authorize]:1 Cistron compatibility checks for entry testuser ... [/etc/freeradius/mods-config/files/authorize]:184 Cistron compatibility checks for entry DEFAULT ... [/etc/freeradius/mods-config/files/authorize]:191 Cistron compatibility checks for entry DEFAULT ... [/etc/freeradius/mods-config/files/authorize]:197 Cistron compatibility checks for entry DEFAULT ... reading pairlist file /etc/freeradius/mods-config/files/authorize [/etc/freeradius/mods-config/files/authorize]:1 Cistron compatibility checks for entry testuser ... [/etc/freeradius/mods-config/files/authorize]:184 Cistron compatibility checks for entry DEFAULT ... [/etc/freeradius/mods-config/files/authorize]:191 Cistron compatibility checks for entry DEFAULT ... [/etc/freeradius/mods-config/files/authorize]:197 Cistron compatibility checks for entry DEFAULT ... reading pairlist file /etc/freeradius/mods-config/files/accounting reading pairlist file /etc/freeradius/mods-config/files/pre-proxy # Loaded module rlm_passwd # Instantiating module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Loaded module rlm_linelog # Instantiating module "linelog" from file /etc/freeradius/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{Packet-Type}:-default}" } # Instantiating module "log_accounting" from file /etc/freeradius/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/radiusd.conf } # server server abfab-idp { # from file /etc/freeradius/sites-enabled/abfab-tr-idp # Loading authenticate {...} # Loading authorize {...} # Loading post-proxy {...} # Loading post-auth {...} Ignoring "sql" (see raddb/mods-available/README.rst) } # server abfab-idp server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} } # server inner-tunnel server default { # from file /etc/freeradius/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default server channel_bindings { # from file /etc/freeradius/sites-enabled/channel_bindings # Loading authorize {...} } # server channel_bindings /etc/freeradius/policy.d/abfab-tr[29] Please change %{gss-acceptor-host-name}} to &gss-acceptor-host-name} thread pool { start_servers = 5 max_servers = 32 min_spare_servers = 3 max_spare_servers = 10 max_requests_per_server = 0 cleanup_delay = 5 max_queue_size = 65536 auto_limit_acct = no } Thread spawned new child 1. Total threads in pool: 1 Thread spawned new child 2. Total threads in pool: 2 Thread spawned new child 3. Total threads in pool: 3 Thread spawned new child 4. Total threads in pool: 4 Thread spawned new child 5. Total threads in pool: 5 Thread pool initialized radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" virtual_server = "abfab-idp" ipaddr = * port = 2083 proto = "tcp" tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 ca_path = "/etc/freeradius/certs" pem_file_type = yes private_key_file = "/etc/freeradius/certs/server.key" certificate_file = "/etc/freeradius/certs/server.pem" ca_file = "/etc/freeradius/certs/ca.pem" private_key_password = <<< secret >>> psk_query = "%{psksql:select hex(key) from psk_keys where keyid = '%{TLS-PSK-Identity}'}" dh_file = "/etc/freeradius/certs/dh" fragment_size = 8192 include_length = yes check_crl = no cipher_list = "DEFAULT" require_client_cert = yes ecdh_curve = "prime256v1" cache { enable = no lifetime = 24 max_entries = 255 } verify { } ocsp { enable = no override_cert_url = no use_nonce = yes timeout = 0 softfail = no } } Thread 5 waiting to be assigned a request Thread 4 waiting to be assigned a request Thread 3 waiting to be assigned a request Thread 1 waiting to be assigned a request Thread 2 waiting to be assigned a request clients = "radsec-abfab" client default { ipaddr = 0.0.0.0/0 require_message_authenticator = no proto = "tls" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Listening on auth proto tcp address * port 2083 (TLS) bound to server abfab-idp Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Opening new proxy socket 'proxy address * port 0' Listening on proxy address * port 37846 Ready to process requests Threads: total/active/spare threads = 5/0/5 Waking up in 0.3 seconds. Thread 5 got semaphore Thread 5 handling request 0, (1 handled so far) (0) Received Access-Request Id 0 from 127.0.0.1:56718 to 127.0.0.1:1812 length 151 (0) User-Name = 'testuser(a)muj.prostor' (0) NAS-IP-Address = 127.0.0.1 (0) Calling-Station-Id = '70-6F-6C-69-73-68' (0) Framed-MTU = 1400 (0) NAS-Port-Type = Wireless-802.11 (0) Connect-Info = 'rad_eap_test + eapol_test' (0) EAP-Message = 0x02000019017465737475736572406d756a2e70726f73746f72 (0) Message-Authenticator = 0xed71a7d4f2b5822548f6f2f3a6a5d07e (0) # Executing section authorize from file /etc/freeradius/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (!&User-Name) { (0) if (!&User-Name) -> FALSE (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@.*@/ ) { (0) if (&User-Name =~ /@.*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: Looking up realm "muj.prostor" for User-Name = "testuser(a)muj.prostor" (0) suffix: Found realm "muj.prostor" (0) suffix: Adding Stripped-User-Name = "testuser" (0) suffix: Adding Realm = "muj.prostor" (0) suffix: Authentication realm is LOCAL (0) [suffix] = ok (0) eap: Peer sent code Response (2) ID 0 length 25 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = EAP (0) # Executing group from file /etc/freeradius/sites-enabled/default (0) authenticate { (0) eap: Peer sent method Identity (1) (0) eap: Calling eap_ttls to process EAP data (0) eap_ttls: Flushing SSL sessions (of #0) (0) eap_ttls: Initiate (0) eap_ttls: Start returned 1 (0) eap: EAP session adding &reply:State = 0x46d103e846d0160f (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) # Executing group from file /etc/freeradius/sites-enabled/default (0) Sent Access-Challenge Id 0 from 127.0.0.1:1812 to 127.0.0.1:56718 length 64 (0) EAP-Message = 0x010100061520 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0x46d103e846d0160f61e71b3cd5f9b6f6 (0) Finished request Thread 5 waiting to be assigned a request Waking up in 0.3 seconds. Thread 4 got semaphore Thread 4 handling request 1, (1 handled so far) (1) Received Access-Request Id 1 from 127.0.0.1:56718 to 127.0.0.1:1812 length 439 (1) User-Name = 'testuser(a)muj.prostor' (1) NAS-IP-Address = 127.0.0.1 (1) Calling-Station-Id = '70-6F-6C-69-73-68' (1) Framed-MTU = 1400 (1) NAS-Port-Type = Wireless-802.11 (1) Connect-Info = 'rad_eap_test + eapol_test' (1) EAP-Message = 0x020101251500160301011a01000116030355dc61f58c4c31193cddd93c26520c7eddc459e4e09204c951b419d67933a97b000082c030c02cc028c024c014c00a00a3009f006b006a0039003800880087c032c02ec02ac026c00fc005009d003d00350084c012c00800160013c00dc003000ac02fc02bc0 (1) State = 0x46d103e846d0160f61e71b3cd5f9b6f6 (1) Message-Authenticator = 0xc80ae9487430191ab0f2a75c134138ff (1) session-state: No cached attributes (1) # Executing section authorize from file /etc/freeradius/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (!&User-Name) { (1) if (!&User-Name) -> FALSE (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@.*@/ ) { (1) if (&User-Name =~ /@.*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /(a)\./) { (1) if (&User-Name =~ /(a)\./) -> FALSE (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: Looking up realm "muj.prostor" for User-Name = "testuser(a)muj.prostor" (1) suffix: Found realm "muj.prostor" (1) suffix: Adding Stripped-User-Name = "testuser" (1) suffix: Adding Realm = "muj.prostor" (1) suffix: Authentication realm is LOCAL (1) [suffix] = ok (1) eap: Peer sent code Response (2) ID 1 length 293 (1) eap: Continuing tunnel setup (1) [eap] = ok (1) } # authorize = ok (1) Found Auth-Type = EAP (1) # Executing group from file /etc/freeradius/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0x46d103e846d0160f (1) eap: Finished EAP session with state 0x46d103e846d0160f (1) eap: Previous EAP request found for state 0x46d103e846d0160f, released from the list (1) eap: Peer sent method TTLS (21) (1) eap: EAP TTLS (21) (1) eap: Calling eap_ttls to process EAP data (1) eap_ttls: Authenticate (1) eap_ttls: processing EAP-TLS (1) eap_ttls: eaptls_verify returned 7 (1) eap_ttls: Done initial handshake (1) eap_ttls: (other): before/accept initialization (1) eap_ttls: TLS_accept: before/accept initialization (1) eap_ttls: <<< Unknown TLS version [length 011a] (1) eap_ttls: TLS_accept: SSLv3 read client hello A (1) eap_ttls: >>> Unknown TLS version [length 005e] (1) eap_ttls: TLS_accept: SSLv3 write server hello A (1) eap_ttls: >>> Unknown TLS version [length 08d0] (1) eap_ttls: TLS_accept: SSLv3 write certificate A (1) eap_ttls: >>> Unknown TLS version [length 014d] (1) eap_ttls: TLS_accept: SSLv3 write key exchange A (1) eap_ttls: >>> Unknown TLS version [length 0004] (1) eap_ttls: TLS_accept: SSLv3 write server done A (1) eap_ttls: TLS_accept: SSLv3 flush data (1) eap_ttls: TLS_accept: Need to read more data: SSLv3 read client certificate A (1) eap_ttls: TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode (1) eap_ttls: eaptls_process returned 13 (1) eap: EAP session adding &reply:State = 0x46d103e847d3160f (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) # Executing group from file /etc/freeradius/sites-enabled/default (1) Sent Access-Challenge Id 1 from 127.0.0.1:1812 to 127.0.0.1:56718 length 1068 Waking up in 0.3 seconds. Thread 3 got semaphore Thread 3 handling request 2, (1 handled so far) (2) Received Access-Request Id 2 from 127.0.0.1:56718 to 127.0.0.1:1812 length 150 (2) User-Name = 'testuser(a)muj.prostor' (2) NAS-IP-Address = 127.0.0.1 (2) Calling-Station-Id = '70-6F-6C-69-73-68' (2) Framed-MTU = 1400 (2) NAS-Port-Type = Wireless-802.11 (2) Connect-Info = 'rad_eap_test + eapol_test' (2) EAP-Message = 0x020200061500 (2) State = 0x46d103e847d3160f61e71b3cd5f9b6f6 (2) Message-Authenticator = 0x84302ab07957fd907f96539016886952 (2) session-state: No cached attributes (2) # Executing section authorize from file /etc/freeradius/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (!&User-Name) { (2) if (!&User-Name) -> FALSE (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@.*@/ ) { (2) if (&User-Name =~ /@.*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /(a)\./) { (2) if (&User-Name =~ /(a)\./) -> FALSE (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: Looking up realm "muj.prostor" for User-Name = "testuser(a)muj.prostor" (2) suffix: Found realm "muj.prostor" (2) suffix: Adding Stripped-User-Name = "testuser" (2) suffix: Adding Realm = "muj.prostor" (2) suffix: Authentication realm is LOCAL (2) [suffix] = ok (2) eap: Peer sent code Response (2) ID 2 length 6 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = EAP (2) # Executing group from file /etc/freeradius/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0x46d103e847d3160f (2) eap: Finished EAP session with state 0x46d103e847d3160f (2) eap: Previous EAP request found for state 0x46d103e847d3160f, released from the list (2) eap: Peer sent method TTLS (21) (2) eap: EAP TTLS (21) (2) eap: Calling eap_ttls to process EAP data (2) eap_ttls: Authenticate (2) eap_ttls: processing EAP-TLS (2) eap_ttls: Received TLS ACK (2) eap_ttls: Received TLS ACK (2) eap_ttls: ACK handshake fragment handler (2) eap_ttls: eaptls_verify returned 1 (2) eap_ttls: eaptls_process returned 13 (2) eap: EAP session adding &reply:State = 0x46d103e844d2160f (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) # Executing group from file /etc/freeradius/sites-enabled/default (2) Sent Access-Challenge Id 2 from 127.0.0.1:1812 to 127.0.0.1:56718 length 1068 (2) EAP-Message = 0x010303ec15c000000a93e2c34c916a4923a0a7cb7d119c2dd6e88d64047881f0345c6a783e137e4ad1b43a5d9ab52cc0c73125f99bfef62dbf29ad4bdd1cf290f17fb81e3561fee9cd6dd01ee4bec7dc5e0a41c8556d075599629772825b591745e91a70039acdd4ea1b08bddefeb11003f1d66b8f4faa (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0x46d103e844d2160f61e71b3cd5f9b6f6 (2) Finished request Thread 3 waiting to be assigned a request Waking up in 0.3 seconds. Thread 1 got semaphore Thread 1 handling request 3, (1 handled so far) (3) Received Access-Request Id 3 from 127.0.0.1:56718 to 127.0.0.1:1812 length 150 (3) User-Name = 'testuser(a)muj.prostor' (3) NAS-IP-Address = 127.0.0.1 (3) Calling-Station-Id = '70-6F-6C-69-73-68' (3) Framed-MTU = 1400 (3) NAS-Port-Type = Wireless-802.11 (3) Connect-Info = 'rad_eap_test + eapol_test' (3) EAP-Message = 0x020300061500 (3) State = 0x46d103e844d2160f61e71b3cd5f9b6f6 (3) Message-Authenticator = 0x11e45ebcedd7f01a46e41f4b533fa08e (3) session-state: No cached attributes (3) # Executing section authorize from file /etc/freeradius/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (!&User-Name) { (3) if (!&User-Name) -> FALSE (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@.*@/ ) { (3) if (&User-Name =~ /@.*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /(a)\./) { (3) if (&User-Name =~ /(a)\./) -> FALSE (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: Looking up realm "muj.prostor" for User-Name = "testuser(a)muj.prostor" (3) suffix: Found realm "muj.prostor" (3) suffix: Adding Stripped-User-Name = "testuser" (3) suffix: Adding Realm = "muj.prostor" (3) suffix: Authentication realm is LOCAL (3) [suffix] = ok (3) eap: Peer sent code Response (2) ID 3 length 6 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = EAP (3) # Executing group from file /etc/freeradius/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0x46d103e844d2160f (3) eap: Finished EAP session with state 0x46d103e844d2160f (3) eap: Previous EAP request found for state 0x46d103e844d2160f, released from the list (3) eap: Peer sent method TTLS (21) (3) eap: EAP TTLS (21) (3) eap: Calling eap_ttls to process EAP data (3) eap_ttls: Authenticate (3) eap_ttls: processing EAP-TLS (3) eap_ttls: Received TLS ACK (3) eap_ttls: Received TLS ACK (3) eap_ttls: ACK handshake fragment handler (3) eap_ttls: eaptls_verify returned 1 (3) eap_ttls: eaptls_process returned 13 (3) eap: EAP session adding &reply:State = 0x46d103e845d5160f (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) # Executing group from file /etc/freeradius/sites-enabled/default (3) Sent Access-Challenge Id 3 from 127.0.0.1:1812 to 127.0.0.1:56718 length 791 (3) EAP-Message = 0x010402d9158000000a93696361746520417574686f72697479820900aa79031e627d0b9b300c0603551d13040530030101ff30360603551d1f042f302d302ba029a0278625687474703a2f2f7777772e6578616d706c652e636f6d2f6578616d706c655f63612e63726c300d06092a864886f70d010105 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0x46d103e845d5160f61e71b3cd5f9b6f6 (3) Finished request Thread 1 waiting to be assigned a request (1) EAP-Message = 0x010203ec15c000000a93160303005e0200005a030355dc61f59ac52305bad83957a2594d506564f4919ded134816948fc39c4652072033a218d505462c178a405e16e5bed8f0817d9f80e78b6093836ce2edb7050e38c030000012ff01000100000b000403000102000f00010116030308d00b0008cc00 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0x46d103e847d3160f61e71b3cd5f9b6f6 (1) Finished request Thread 4 waiting to be assigned a request Waking up in 0.3 seconds. Thread 2 got semaphore Thread 2 handling request 4, (1 handled so far) (4) Received Access-Request Id 4 from 127.0.0.1:56718 to 127.0.0.1:1812 length 276 (4) User-Name = 'testuser(a)muj.prostor' (4) NAS-IP-Address = 127.0.0.1 (4) Calling-Station-Id = '70-6F-6C-69-73-68' (4) Framed-MTU = 1400 (4) NAS-Port-Type = Wireless-802.11 (4) Connect-Info = 'rad_eap_test + eapol_test' (4) EAP-Message = 0x020400841500160303004610000042410481a878870091dbc32381894b3e7fba2cb9a93e7b008584396f1cac88db37617f18ba55919a1b9d1015b6029a2eef48a4d927a1db72b840799cc11aee416b97fc14030300010116030300289bb9f986e5ca653f81b6ba7f28e6ee93e19764d9132d5ebcc40fee (4) State = 0x46d103e845d5160f61e71b3cd5f9b6f6 (4) Message-Authenticator = 0x92430f432b19026a1bbeba45a11720f2 (4) session-state: No cached attributes (4) # Executing section authorize from file /etc/freeradius/sites-enabled/default (4) authorize { (4) policy filter_username { (4) if (!&User-Name) { (4) if (!&User-Name) -> FALSE (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@.*@/ ) { (4) if (&User-Name =~ /@.*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /(a)\./) { (4) if (&User-Name =~ /(a)\./) -> FALSE (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: Looking up realm "muj.prostor" for User-Name = "testuser(a)muj.prostor" (4) suffix: Found realm "muj.prostor" (4) suffix: Adding Stripped-User-Name = "testuser" (4) suffix: Adding Realm = "muj.prostor" (4) suffix: Authentication realm is LOCAL (4) [suffix] = ok (4) eap: Peer sent code Response (2) ID 4 length 132 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = EAP (4) # Executing group from file /etc/freeradius/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0x46d103e845d5160f (4) eap: Finished EAP session with state 0x46d103e845d5160f (4) eap: Previous EAP request found for state 0x46d103e845d5160f, released from the list (4) eap: Peer sent method TTLS (21) (4) eap: EAP TTLS (21) (4) eap: Calling eap_ttls to process EAP data (4) eap_ttls: Authenticate (4) eap_ttls: processing EAP-TLS (4) eap_ttls: eaptls_verify returned 7 (4) eap_ttls: Done initial handshake (4) eap_ttls: <<< Unknown TLS version [length 0046] (4) eap_ttls: TLS_accept: SSLv3 read client key exchange A (4) eap_ttls: <<< Unknown TLS version [length 0001] (4) eap_ttls: <<< Unknown TLS version [length 0010] (4) eap_ttls: TLS_accept: SSLv3 read finished A (4) eap_ttls: >>> Unknown TLS version [length 0001] (4) eap_ttls: TLS_accept: SSLv3 write change cipher spec A (4) eap_ttls: >>> Unknown TLS version [length 0010] (4) eap_ttls: TLS_accept: SSLv3 write finished A (4) eap_ttls: TLS_accept: SSLv3 flush data SSL: adding session 33a218d505462c178a405e16e5bed8f0817d9f80e78b6093836ce2edb7050e38 to cache (4) eap_ttls: (other): SSL negotiation finished successfully SSL Connection Established (4) eap_ttls: eaptls_process returned 13 (4) eap: EAP session adding &reply:State = 0x46d103e842d4160f (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) # Executing group from file /etc/freeradius/sites-enabled/default (4) Sent Access-Challenge Id 4 from 127.0.0.1:1812 to 127.0.0.1:56718 length 119 (4) EAP-Message = 0x0105003d1580000000331403030001011603030028d2f96f0244ac87d5119f22c6ae3674bc26cad6b86e55ba9bcf36306e4fd27a4c435176c40bac962d (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0x46d103e842d4160f61e71b3cd5f9b6f6 (4) Finished request Thread 2 waiting to be assigned a request Waking up in 0.3 seconds. Thread 5 got semaphore Thread 5 handling request 5, (2 handled so far) (5) Received Access-Request Id 5 from 127.0.0.1:56718 to 127.0.0.1:1812 length 299 (5) User-Name = 'testuser(a)muj.prostor' (5) NAS-IP-Address = 127.0.0.1 (5) Calling-Station-Id = '70-6F-6C-69-73-68' (5) Framed-MTU = 1400 (5) NAS-Port-Type = Wireless-802.11 (5) Connect-Info = 'rad_eap_test + eapol_test' (5) EAP-Message = 0x0205009b150017030300909bb9f986e5ca65406ad6d8a5567e4030dd6799f0d9e62358ccb7757c9dc4e604195a0f82566daf76417338606b1bd876e23263daa71a931ea157e4a1f2d869b4a1c41b135062418f2d930e5f670f351de2b29881ad79287339240d86db4e56e2c1e583df8e12f998e33ebdef (5) State = 0x46d103e842d4160f61e71b3cd5f9b6f6 (5) Message-Authenticator = 0x06a44849163989b16f3b13a91e6847b9 (5) session-state: No cached attributes (5) # Executing section authorize from file /etc/freeradius/sites-enabled/default (5) authorize { (5) policy filter_username { (5) if (!&User-Name) { (5) if (!&User-Name) -> FALSE (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@.*@/ ) { (5) if (&User-Name =~ /@.*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /(a)\./) { (5) if (&User-Name =~ /(a)\./) -> FALSE (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) [chap] = noop (5) [mschap] = noop (5) [digest] = noop (5) suffix: Checking for suffix after "@" (5) suffix: Looking up realm "muj.prostor" for User-Name = "testuser(a)muj.prostor" (5) suffix: Found realm "muj.prostor" (5) suffix: Adding Stripped-User-Name = "testuser" (5) suffix: Adding Realm = "muj.prostor" (5) suffix: Authentication realm is LOCAL (5) [suffix] = ok (5) eap: Peer sent code Response (2) ID 5 length 155 (5) eap: Continuing tunnel setup (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = EAP (5) # Executing group from file /etc/freeradius/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0x46d103e842d4160f (5) eap: Finished EAP session with state 0x46d103e842d4160f (5) eap: Previous EAP request found for state 0x46d103e842d4160f, released from the list (5) eap: Peer sent method TTLS (21) (5) eap: EAP TTLS (21) (5) eap: Calling eap_ttls to process EAP data (5) eap_ttls: Authenticate (5) eap_ttls: processing EAP-TLS (5) eap_ttls: eaptls_verify returned 7 (5) eap_ttls: Done initial handshake (5) eap_ttls: eaptls_process returned 7 (5) eap_ttls: Session established. Proceeding to decode tunneled attributes (5) eap_ttls: Tunneled challenge is incorrect SSL: Removing session 33a218d505462c178a405e16e5bed8f0817d9f80e78b6093836ce2edb7050e38 from the cache (5) eap: ERROR: Failed continuing EAP TTLS (21) session. EAP sub-module failed (5) eap: Failed in EAP select (5) [eap] = invalid (5) } # authenticate = invalid (5) Failed to authenticate the user (5) Using Post-Auth-Type Reject (5) # Executing group from file /etc/freeradius/sites-enabled/default (5) Post-Auth-Type REJECT { (5) attr_filter.access_reject: EXPAND %{User-Name} (5) attr_filter.access_reject: --> testuser(a)muj.prostor (5) attr_filter.access_reject: Matched entry DEFAULT at line 18 (5) [attr_filter.access_reject] = updated (5) eap: Reply already contained an EAP-Message, not inserting EAP-Failure (5) [eap] = noop (5) policy remove_reply_message_if_eap { (5) if (&reply:EAP-Message && &reply:Reply-Message) { (5) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (5) else { (5) [noop] = noop (5) } # else = noop (5) } # policy remove_reply_message_if_eap = noop (5) } # Post-Auth-Type REJECT = updated (5) Delaying response for 1.000000 seconds Thread 5 waiting to be assigned a request Waking up in 0.6 seconds. (5) Sending delayed response (5) Sent Access-Reject Id 5 from 127.0.0.1:1812 to 127.0.0.1:56718 length 44 (5) EAP-Message = 0x04050004 (5) Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.9 seconds. (0) <done>: Cleaning up request packet ID 0 with timestamp +14 (1) <done>: Cleaning up request packet ID 1 with timestamp +14 (2) <done>: Cleaning up request packet ID 2 with timestamp +14 (3) <done>: Cleaning up request packet ID 3 with timestamp +14 (4) <done>: Cleaning up request packet ID 4 with timestamp +14 (5) Cleaning up request packet ID 5 with timestamp +14 Ready to process requests -- debug log ends -- Thank you :-) Stefan Paetow Moonshot Industry & Research Liaison Coordinator t: +44 (0)1235 822 125 gpg: 0x3FCE5142 xmpp: stefanp(a)jabber.dev.ja.net skype: stefan.paetow.janet Lumen House, Library Avenue, Harwell Oxford, Didcot, OX11 0SG jisc.ac.uk Jisc is a registered charity (number 1149740) and a company limited by guarantee which is registered in England under Company No. 5747339, VAT No. GB 197 0632 86. Jisc’s registered office is: One Castlepark, Tower Hill, Bristol, BS2 0JA. T 0203 697 5800. Jisc Collections and Janet Ltd. is a wholly owned Jisc subsidiary and a company limited by guarantee which is registered in England under Company No. number 2881024, VAT No. GB 197 0632 86. The registered office is: Lumen House, Library Avenue, Harwell, Didcot, Oxfordshire, OX11 0SG. T 01235 822200.

2 2

MySQL Connect Timeout?
by Susan Barnes 24 Aug '15

24 Aug '15

Hi List, Is there a way to set a connect timeout for a MySQL-Server? At the moment it seems to be a bit longer then 60 seconds, but I cannot find where this is set (Using freeradius 3.0.9). Thanks for your help Susan -- S.Barnes Cologne University IT/Networking Dept.

2 5

No Pool-Name defined - how should I connect an IP poolwith an APN or requests from a specific NAS?
by Sophie Loewenthal 24 Aug '15

24 Aug '15

Hi, We have FreeRadius running on Centos 6 ( freeradius-2.1.12-1.el6.x86_64) . I have a new NAS set up and I would like to have a Pool configured for this. We have several existing NAS and Pool_Names set up that work. They were configured by a previous team. I cannot find the logic between how an incoming request for IP allocation and a Pool-Name. The message was, Mon Aug 24 10:39:10 2015 : Auth: Login OK: [0000008fa] (from client v-nas-x2x port 9380 cli 882393728079768) Mon Aug 24 10:39:10 2015 : Info: No Pool-Name defined (did x2x.v.trimbletl.com cli 882393728079768 port 9380 user 0000008fa) How could I assigned a Pool-Name to requests from our APN? I should create some IP addresses i radippool for this, but I would prefer the incoming APN x2x.v.trimbletl.com to use an existing IP pool for now. /etc/raddb/users contains some entries, DEFAULT NAS-IP-Address == 172.200.100.1, Pool-Name := v DEFAULT NAS-IP-Address == 195.232.123.0, Pool-Name := v-x2x DEFAULT NAS-IP-Address == 10.123.255.254, Pool-Name := p-c DEFAULT NAS-IP-Address == 10.123.255.254, Pool-Name := p-m DEFAULT ramed-IP-Netmask = 255.255.255.255 Our ip pool has four pool_names defined and we have lots of IP addresses, mysql> select count(*) from radippool; +----------+ | count(*) | +----------+ | 422652 | I've read up on the sqlippool dox and could not how ours worked. Any ideas? Kind regards, Sophie

2 1

freeradius dialupadmin development invitation
by Timmy 24 Aug '15

24 Aug '15

Hello all Users, Freeradius dialupadmin is a very nice and native GUI for Freeradius 2.2. However, it does not work any more after php version 5.3. I want to start an invitation for raising a fund for developing it so that it can still work up to php 5.6, and also redesign its GUI to have a modern outlook. I think a few hundred US$ will do. If any body is interested, we can share the expense. 10 participants are cheap enough to complete this project. Yours Faithfully, Timmy

6 7

Ubuntu FreeRADIUS Packages
by Kev Pearce 24 Aug '15

24 Aug '15

Hi all, Are there any official places (i.e. PPAs) to get pre-compiled FreeRADIUS packages later then 3.0.4 from? "http://packages.networkradius.com/ubuntu trusty main" only has 3.0.4 in it. I'm after 3.0.9. Cheers all Kev/.

3 6

Using DHCP for Radius on a Cable Modem Plant
by John Alcock 23 Aug '15

23 Aug '15

Morning, Has anyone use freeradius and the built-in dhcp server in freeradius for a small cable modem plant? I am using LDAP for the authentication part and it works. Radius just seems like a much cleaner solution. So, the idea I have in mind is using freeradius for authentication and go ahead and use it for DHCP. I will use a SQL database backend to keep track of users. So, my question has to do with documentation. Most of seems to be dealing with version 2, and the main page says.. hey.. do not use version 2 configs as a starting space. Also, documentation seems weak on the new DHCP options. The way I figure it, if I am going to complain about documentation or lack thereof, I just need to write some documentation and submit to the group. That being said, some directions in the right direction would help me get started. I have seen documentation on each of the separate items below, but not much in tieing it all together. Platform will be Linux running a standard LAMP installation. SQL database (mysql, postgress, I do not care) to keep track of information, specifically the MAC address which will be used for authentication. DHCP? Should I use the DHCP built into Radius? Or outside DHCP server. I kind like the idea of allowing Radius handling it all. So. At the end, I guess I am looking for some general advice on best practices of setting this up. Once I get an overview setup, then I can start working on specifics. John

5 13

Strange things with android phone
by kjonca＠o2.pl 22 Aug '15

22 Aug '15

I have configured and working wifi with eap-tls authentication. I want to use another root ca, so I did the following steps. openssl genrsa -aes256 -out private/wifi,beta,ca.key 4096 openssl req -new -out cacerts/wifi,beta,ca.pem -subj "/C=PL/ST=Mazowieckie/L=Warszawa/O=beta/OU=wifi/CN=beta-wifi-ca/emailAddress=kjonca(a)poczta.onet.pl" -x509 -days 3650 -extensions v3_ca -key private/wifi,beta,ca.key openssl req -new -out req.csr -subj "/C=PL/ST=Mazowieckie/O=beta/OU=beta.kjonca/CN=selen.kjonca" -key ../private/selen.kjonca.1.key #this is phone key openssl ca -in req.csr -cert cacerts/wifi,beta,ca.pem -keyfile private/wifi,beta,ca.key -extensions xpclient_ext -extfile ../xp.ext -out certs/wifi,selen,1.pem openssl x509 -x509toreq -in certs/wifi,beta-wifi-beta,2,1.pem -out req.csr -signkey private/wifi,beta-wifi-beta,2.key #this is key for freeradius instance openssl ca -in req.csr -cert cacerts/wifi,beta,ca.pem -keyfile private/wifi,beta,ca.key -out certs/wifi,beta-wifi-beta,2.5.pem openssl pkcs12 -export -certfile cacerts/wifi,beta,ca.pem -in certs/wifi,selen,1.pem -inkey ../private/selen.kjonca.1.key -out wifi,selen.p12 Then *.p12 file was sent to phone and imported into cert store. And strange things happen: When "CA cert" field in wifi network definition is set then phone can't connect. When is empty - eweything works. Here some logs. 12:02:28 2015 : Info: Cleaning up request 83 ID 240 with timestamp +1556 Sat Aug 22 12:02:28 2015 : Info: Cleaning up request 84 ID 241 with timestamp +1556 Sat Aug 22 12:02:28 2015 : Info: Cleaning up request 85 ID 242 with timestamp +1556 Sat Aug 22 12:02:28 2015 : Info: Cleaning up request 86 ID 243 with timestamp +1556 Sat Aug 22 12:02:28 2015 : Info: Cleaning up request 87 ID 244 with timestamp +1556 Sat Aug 22 12:02:28 2015 : Info: Cleaning up request 88 ID 245 with timestamp +1556 Sat Aug 22 12:02:28 2015 : Info: Ready to process requests. Sat Aug 22 12:04:43 2015 : Debug: Thread 5 got semaphore Sat Aug 22 12:04:43 2015 : Debug: Waking up in 0.9 seconds. Sat Aug 22 12:04:43 2015 : Debug: Thread 5 handling request 89, (18 handled so far) Sat Aug 22 12:04:43 2015 : Info: # Executing section authorize from file /etc/freeradius/sites-enabled/default Sat Aug 22 12:04:43 2015 : Info: +group authorize { Sat Aug 22 12:04:43 2015 : Info: ++[preprocess] = ok Sat Aug 22 12:04:43 2015 : Info: ++[chap] = noop Sat Aug 22 12:04:43 2015 : Info: ++[mschap] = noop Sat Aug 22 12:04:43 2015 : Info: ++[digest] = noop Sat Aug 22 12:04:43 2015 : Info: [suffix] No '@' in User-Name = "selen.kjonca", looking up realm NULL Sat Aug 22 12:04:43 2015 : Info: [suffix] No such realm "NULL" Sat Aug 22 12:04:43 2015 : Info: ++[suffix] = noop Sat Aug 22 12:04:43 2015 : Info: [eap] EAP packet type response id 154 length 17 Sat Aug 22 12:04:43 2015 : Info: [eap] No EAP Start, assuming it's an on-going EAP conversation Sat Aug 22 12:04:43 2015 : Info: ++[eap] = updated Sat Aug 22 12:04:43 2015 : Info: [files] users: Matched entry selen.kjonca at line 12 Sat Aug 22 12:04:43 2015 : Info: ++[files] = ok Sat Aug 22 12:04:43 2015 : Info: ++[expiration] = noop Sat Aug 22 12:04:43 2015 : Info: ++[logintime] = noop Sat Aug 22 12:04:43 2015 : Info: [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. Sat Aug 22 12:04:43 2015 : Info: ++[pap] = noop Sat Aug 22 12:04:43 2015 : Info: +} # group authorize = updated Sat Aug 22 12:04:43 2015 : Info: Found Auth-Type = EAP Sat Aug 22 12:04:43 2015 : Info: # Executing group from file /etc/freeradius/sites-enabled/default Sat Aug 22 12:04:43 2015 : Info: +group authenticate { Sat Aug 22 12:04:43 2015 : Info: [eap] EAP Identity Sat Aug 22 12:04:43 2015 : Info: [eap] processing type tls Sat Aug 22 12:04:43 2015 : Info: [tls] Requiring client certificate Sat Aug 22 12:04:43 2015 : Info: [tls] Initiate Sat Aug 22 12:04:43 2015 : Info: [tls] Start returned 1 Sat Aug 22 12:04:43 2015 : Info: ++[eap] = handled Sat Aug 22 12:04:43 2015 : Info: +} # group authenticate = handled Sat Aug 22 12:04:43 2015 : Info: Finished request 89. Sat Aug 22 12:04:43 2015 : Debug: Going to the next request Sat Aug 22 12:04:43 2015 : Debug: Thread 5 waiting to be assigned a request Sat Aug 22 12:04:43 2015 : Debug: Waking up in 0.9 seconds. Sat Aug 22 12:04:43 2015 : Debug: Thread 3 got semaphore Sat Aug 22 12:04:43 2015 : Debug: Thread 3 handling request 90, (19 handled so far) Sat Aug 22 12:04:43 2015 : Info: # Executing section authorize from file /etc/freeradius/sites-enabled/default Sat Aug 22 12:04:43 2015 : Info: +group authorize { Sat Aug 22 12:04:43 2015 : Info: ++[preprocess] = ok Sat Aug 22 12:04:43 2015 : Info: ++[chap] = noop Sat Aug 22 12:04:43 2015 : Info: ++[mschap] = noop Sat Aug 22 12:04:43 2015 : Info: ++[digest] = noop Sat Aug 22 12:04:43 2015 : Info: [suffix] No '@' in User-Name = "selen.kjonca", looking up realm NULL Sat Aug 22 12:04:43 2015 : Info: [suffix] No such realm "NULL" Sat Aug 22 12:04:43 2015 : Info: ++[suffix] = noop Sat Aug 22 12:04:43 2015 : Info: [eap] EAP packet type response id 155 length 204 Sat Aug 22 12:04:43 2015 : Info: [eap] No EAP Start, assuming it's an on-going EAP conversation Sat Aug 22 12:04:43 2015 : Info: ++[eap] = updated Sat Aug 22 12:04:43 2015 : Info: [files] users: Matched entry selen.kjonca at line 12 Sat Aug 22 12:04:43 2015 : Info: ++[files] = ok Sat Aug 22 12:04:43 2015 : Info: ++[expiration] = noop Sat Aug 22 12:04:43 2015 : Info: ++[logintime] = noop Sat Aug 22 12:04:43 2015 : Info: ++[pap] = noop Sat Aug 22 12:04:43 2015 : Info: +} # group authorize = updated Sat Aug 22 12:04:43 2015 : Info: Found Auth-Type = EAP Sat Aug 22 12:04:43 2015 : Info: # Executing group from file /etc/freeradius/sites-enabled/default Sat Aug 22 12:04:43 2015 : Info: +group authenticate { Sat Aug 22 12:04:43 2015 : Info: [eap] Request found, released from the list Sat Aug 22 12:04:43 2015 : Info: [eap] EAP/tls Sat Aug 22 12:04:43 2015 : Info: [eap] processing type tls Sat Aug 22 12:04:43 2015 : Info: [tls] Authenticate Sat Aug 22 12:04:43 2015 : Info: [tls] processing EAP-TLS Sat Aug 22 12:04:43 2015 : Info: [tls] eaptls_verify returned 7 Sat Aug 22 12:04:43 2015 : Info: [tls] Done initial handshake Sat Aug 22 12:04:43 2015 : Info: [tls] (other): before/accept initialization Sat Aug 22 12:04:43 2015 : Info: [tls] TLS_accept: before/accept initialization Sat Aug 22 12:04:43 2015 : Info: [tls] <<< Unknown TLS version [length 0005] Sat Aug 22 12:04:43 2015 : Info: [tls] <<< TLS 1.0 Handshake [length 00c1], ClientHello Sat Aug 22 12:04:43 2015 : Info: [tls] TLS_accept: unknown state Sat Aug 22 12:04:43 2015 : Info: [tls] >>> Unknown TLS version [length 0005] Sat Aug 22 12:04:43 2015 : Info: [tls] >>> TLS 1.0 Handshake [length 0039], ServerHello Sat Aug 22 12:04:43 2015 : Info: [tls] TLS_accept: unknown state Sat Aug 22 12:04:43 2015 : Info: [tls] >>> Unknown TLS version [length 0005] Sat Aug 22 12:04:43 2015 : Info: [tls] >>> TLS 1.0 Handshake [length 0695], Certificate Sat Aug 22 12:04:43 2015 : Info: [tls] TLS_accept: unknown state Sat Aug 22 12:04:43 2015 : Info: [tls] >>> Unknown TLS version [length 0005] Sat Aug 22 12:04:43 2015 : Info: [tls] >>> TLS 1.0 Handshake [length 00cb], ServerKeyExchange Sat Aug 22 12:04:43 2015 : Info: [tls] TLS_accept: unknown state Sat Aug 22 12:04:43 2015 : Info: [tls] >>> Unknown TLS version [length 0005] Sat Aug 22 12:04:43 2015 : Info: [tls] >>> TLS 1.0 Handshake [length 000e], CertificateRequest Sat Aug 22 12:04:43 2015 : Info: [tls] TLS_accept: unknown state Sat Aug 22 12:04:43 2015 : Info: [tls] TLS_accept: unknown state Sat Aug 22 12:04:43 2015 : Info: [tls] TLS_accept: Need to read more data: unknown state Sat Aug 22 12:04:43 2015 : Debug: In SSL Handshake Phase Sat Aug 22 12:04:43 2015 : Debug: In SSL Accept mode Sat Aug 22 12:04:43 2015 : Info: [tls] eaptls_process returned 13 Sat Aug 22 12:04:43 2015 : Info: ++[eap] = handled Sat Aug 22 12:04:43 2015 : Info: +} # group authenticate = handled Sat Aug 22 12:04:43 2015 : Info: Finished request 90. Sat Aug 22 12:04:43 2015 : Debug: Going to the next request Sat Aug 22 12:04:43 2015 : Debug: Thread 3 waiting to be assigned a request Sat Aug 22 12:04:43 2015 : Debug: Waking up in 0.9 seconds. Sat Aug 22 12:04:43 2015 : Debug: Thread 4 got semaphore Sat Aug 22 12:04:43 2015 : Debug: Thread 4 handling request 91, (19 handled so far) Sat Aug 22 12:04:43 2015 : Info: # Executing section authorize from file /etc/freeradius/sites-enabled/default Sat Aug 22 12:04:43 2015 : Info: +group authorize { Sat Aug 22 12:04:43 2015 : Info: ++[preprocess] = ok Sat Aug 22 12:04:43 2015 : Info: ++[chap] = noop Sat Aug 22 12:04:43 2015 : Info: ++[mschap] = noop Sat Aug 22 12:04:43 2015 : Info: ++[digest] = noop Sat Aug 22 12:04:43 2015 : Info: [suffix] No '@' in User-Name = "selen.kjonca", looking up realm NULL Sat Aug 22 12:04:43 2015 : Info: [suffix] No such realm "NULL" Sat Aug 22 12:04:43 2015 : Info: ++[suffix] = noop Sat Aug 22 12:04:43 2015 : Info: [eap] EAP packet type response id 156 length 6 Sat Aug 22 12:04:43 2015 : Info: [eap] No EAP Start, assuming it's an on-going EAP conversation Sat Aug 22 12:04:43 2015 : Info: ++[eap] = updated Sat Aug 22 12:04:43 2015 : Info: [files] users: Matched entry selen.kjonca at line 12 Sat Aug 22 12:04:43 2015 : Info: ++[files] = ok Sat Aug 22 12:04:43 2015 : Info: ++[expiration] = noop Sat Aug 22 12:04:43 2015 : Info: ++[logintime] = noop Sat Aug 22 12:04:43 2015 : Info: ++[pap] = noop Sat Aug 22 12:04:43 2015 : Info: +} # group authorize = updated Sat Aug 22 12:04:43 2015 : Info: Found Auth-Type = EAP Sat Aug 22 12:04:43 2015 : Info: # Executing group from file /etc/freeradius/sites-enabled/default Sat Aug 22 12:04:43 2015 : Info: +group authenticate { Sat Aug 22 12:04:43 2015 : Info: [eap] Request found, released from the list Sat Aug 22 12:04:43 2015 : Info: [eap] EAP/tls Sat Aug 22 12:04:43 2015 : Info: [eap] processing type tls Sat Aug 22 12:04:43 2015 : Info: [tls] Authenticate Sat Aug 22 12:04:43 2015 : Info: [tls] processing EAP-TLS Sat Aug 22 12:04:43 2015 : Info: [tls] Received TLS ACK Sat Aug 22 12:04:43 2015 : Info: [tls] ACK handshake fragment handler Sat Aug 22 12:04:43 2015 : Info: [tls] eaptls_verify returned 1 Sat Aug 22 12:04:43 2015 : Info: [tls] eaptls_process returned 13 Sat Aug 22 12:04:43 2015 : Info: ++[eap] = handled Sat Aug 22 12:04:43 2015 : Info: +} # group authenticate = handled Sat Aug 22 12:04:43 2015 : Info: Finished request 91. Sat Aug 22 12:04:43 2015 : Debug: Going to the next request Sat Aug 22 12:04:43 2015 : Debug: Thread 4 waiting to be assigned a request Sat Aug 22 12:04:44 2015 : Debug: Waking up in 0.9 seconds. Sat Aug 22 12:04:44 2015 : Debug: Thread 1 got semaphore Sat Aug 22 12:04:44 2015 : Debug: Thread 1 handling request 92, (19 handled so far) Sat Aug 22 12:04:44 2015 : Info: # Executing section authorize from file /etc/freeradius/sites-enabled/default Sat Aug 22 12:04:44 2015 : Info: +group authorize { Sat Aug 22 12:04:44 2015 : Info: ++[preprocess] = ok Sat Aug 22 12:04:44 2015 : Info: ++[chap] = noop Sat Aug 22 12:04:44 2015 : Info: ++[mschap] = noop Sat Aug 22 12:04:44 2015 : Info: ++[digest] = noop Sat Aug 22 12:04:44 2015 : Info: [suffix] No '@' in User-Name = "selen.kjonca", looking up realm NULL Sat Aug 22 12:04:44 2015 : Info: [suffix] No such realm "NULL" Sat Aug 22 12:04:44 2015 : Info: ++[suffix] = noop Sat Aug 22 12:04:44 2015 : Info: [eap] EAP packet type response id 157 length 253 Sat Aug 22 12:04:44 2015 : Info: [eap] No EAP Start, assuming it's an on-going EAP conversation Sat Aug 22 12:04:44 2015 : Info: ++[eap] = updated Sat Aug 22 12:04:44 2015 : Info: [files] users: Matched entry selen.kjonca at line 12 Sat Aug 22 12:04:44 2015 : Info: ++[files] = ok Sat Aug 22 12:04:44 2015 : Info: ++[expiration] = noop Sat Aug 22 12:04:44 2015 : Info: ++[logintime] = noop Sat Aug 22 12:04:44 2015 : Info: ++[pap] = noop Sat Aug 22 12:04:44 2015 : Info: +} # group authorize = updated Sat Aug 22 12:04:44 2015 : Info: Found Auth-Type = EAP Sat Aug 22 12:04:44 2015 : Info: # Executing group from file /etc/freeradius/sites-enabled/default Sat Aug 22 12:04:44 2015 : Info: +group authenticate { Sat Aug 22 12:04:44 2015 : Info: [eap] Request found, released from the list Sat Aug 22 12:04:44 2015 : Info: [eap] EAP/tls Sat Aug 22 12:04:44 2015 : Info: [eap] processing type tls Sat Aug 22 12:04:44 2015 : Info: [tls] Authenticate Sat Aug 22 12:04:44 2015 : Info: [tls] processing EAP-TLS Sat Aug 22 12:04:44 2015 : Debug: TLS Length 1577 Sat Aug 22 12:04:44 2015 : Info: [tls] Received EAP-TLS First Fragment of the message Sat Aug 22 12:04:44 2015 : Info: [tls] eaptls_verify returned 9 Sat Aug 22 12:04:44 2015 : Info: [tls] eaptls_process returned 13 Sat Aug 22 12:04:44 2015 : Info: ++[eap] = handled Sat Aug 22 12:04:44 2015 : Info: +} # group authenticate = handled Sat Aug 22 12:04:44 2015 : Info: Finished request 92. Sat Aug 22 12:04:44 2015 : Debug: Going to the next request Sat Aug 22 12:04:44 2015 : Debug: Thread 1 waiting to be assigned a request Sat Aug 22 12:04:44 2015 : Debug: Waking up in 0.9 seconds. Sat Aug 22 12:04:44 2015 : Debug: Thread 2 got semaphore Sat Aug 22 12:04:44 2015 : Debug: Thread 2 handling request 93, (19 handled so far) Sat Aug 22 12:04:44 2015 : Info: # Executing section authorize from file /etc/freeradius/sites-enabled/default Sat Aug 22 12:04:44 2015 : Info: +group authorize { Sat Aug 22 12:04:44 2015 : Info: ++[preprocess] = ok Sat Aug 22 12:04:44 2015 : Info: ++[chap] = noop Sat Aug 22 12:04:44 2015 : Info: ++[mschap] = noop Sat Aug 22 12:04:44 2015 : Info: ++[digest] = noop Sat Aug 22 12:04:44 2015 : Info: [suffix] No '@' in User-Name = "selen.kjonca", looking up realm NULL Sat Aug 22 12:04:44 2015 : Info: [suffix] No such realm "NULL" Sat Aug 22 12:04:44 2015 : Info: ++[suffix] = noop Sat Aug 22 12:04:44 2015 : Info: [eap] EAP packet type response id 158 length 185 Sat Aug 22 12:04:44 2015 : Info: [eap] No EAP Start, assuming it's an on-going EAP conversation Sat Aug 22 12:04:44 2015 : Info: ++[eap] = updated Sat Aug 22 12:04:44 2015 : Info: [files] users: Matched entry selen.kjonca at line 12 Sat Aug 22 12:04:44 2015 : Info: ++[files] = ok Sat Aug 22 12:04:44 2015 : Info: ++[expiration] = noop Sat Aug 22 12:04:44 2015 : Info: ++[logintime] = noop Sat Aug 22 12:04:44 2015 : Info: ++[pap] = noop Sat Aug 22 12:04:44 2015 : Info: +} # group authorize = updated Sat Aug 22 12:04:44 2015 : Info: Found Auth-Type = EAP Sat Aug 22 12:04:44 2015 : Info: # Executing group from file /etc/freeradius/sites-enabled/default Sat Aug 22 12:04:44 2015 : Info: +group authenticate { Sat Aug 22 12:04:44 2015 : Info: [eap] Request found, released from the list Sat Aug 22 12:04:44 2015 : Info: [eap] EAP/tls Sat Aug 22 12:04:44 2015 : Info: [eap] processing type tls Sat Aug 22 12:04:44 2015 : Info: [tls] Authenticate Sat Aug 22 12:04:44 2015 : Info: [tls] processing EAP-TLS Sat Aug 22 12:04:44 2015 : Info: [tls] eaptls_verify returned 7 Sat Aug 22 12:04:44 2015 : Info: [tls] Done initial handshake Sat Aug 22 12:04:44 2015 : Info: [tls] <<< Unknown TLS version [length 0005] Sat Aug 22 12:04:44 2015 : Info: [tls] <<< TLS 1.0 Handshake [length 0493], Certificate Sat Aug 22 12:04:44 2015 : Info: [tls] chain-depth=1, Sat Aug 22 12:04:44 2015 : Info: [tls] error=0 Sat Aug 22 12:04:44 2015 : Info: [tls] --> User-Name = selen.kjonca Sat Aug 22 12:04:44 2015 : Info: [tls] --> BUF-Name = beta-wifi-ca-2 Sat Aug 22 12:04:44 2015 : Info: [tls] --> subject = /C=PL/ST=Mazowieckie/L=Warszawa/O=beta/OU=wifi/CN=beta-wifi-ca-2/emailAddress=kjonca(a)poczta.onet.pl Sat Aug 22 12:04:44 2015 : Info: [tls] --> issuer = /C=PL/ST=Mazowieckie/L=Warszawa/O=beta/OU=wifi/CN=beta-wifi-ca-2/emailAddress=kjonca(a)poczta.onet.pl Sat Aug 22 12:04:44 2015 : Info: [tls] --> verify return:1 Sat Aug 22 12:04:44 2015 : Info: [tls] expand: %{User-Name} -> selen.kjonca Sat Aug 22 12:04:44 2015 : Info: [tls] checking certificate CN (selen.kjonca) with xlat'ed value (selen.kjonca) Sat Aug 22 12:04:44 2015 : Info: [tls] chain-depth=0, Sat Aug 22 12:04:44 2015 : Info: [tls] error=0 Sat Aug 22 12:04:44 2015 : Info: [tls] --> User-Name = selen.kjonca Sat Aug 22 12:04:44 2015 : Info: [tls] --> BUF-Name = selen.kjonca Sat Aug 22 12:04:44 2015 : Info: [tls] --> subject = /C=PL/ST=Mazowieckie/O=beta/OU=beta.kjonca/CN=selen.kjonca Sat Aug 22 12:04:44 2015 : Info: [tls] --> issuer = /C=PL/ST=Mazowieckie/L=Warszawa/O=beta/OU=wifi/CN=beta-wifi-ca-2/emailAddress=kjonca(a)poczta.onet.pl Sat Aug 22 12:04:44 2015 : Info: [tls] --> verify return:1 Sat Aug 22 12:04:44 2015 : Info: [tls] TLS_accept: unknown state Sat Aug 22 12:04:44 2015 : Info: [tls] <<< Unknown TLS version [length 0005] Sat Aug 22 12:04:44 2015 : Info: [tls] <<< TLS 1.0 Handshake [length 0046], ClientKeyExchange Sat Aug 22 12:04:44 2015 : Info: [tls] TLS_accept: unknown state Sat Aug 22 12:04:44 2015 : Info: [tls] <<< Unknown TLS version [length 0005] Sat Aug 22 12:04:44 2015 : Info: [tls] <<< TLS 1.0 Handshake [length 0106], CertificateVerify Sat Aug 22 12:04:44 2015 : Info: [tls] TLS_accept: unknown state Sat Aug 22 12:04:44 2015 : Info: [tls] <<< Unknown TLS version [length 0005] Sat Aug 22 12:04:44 2015 : Info: [tls] <<< TLS 1.0 ChangeCipherSpec [length 0001] Sat Aug 22 12:04:44 2015 : Info: [tls] <<< Unknown TLS version [length 0005] Sat Aug 22 12:04:44 2015 : Info: [tls] <<< TLS 1.0 Handshake [length 0010], Finished Sat Aug 22 12:04:44 2015 : Info: [tls] TLS_accept: unknown state Sat Aug 22 12:04:44 2015 : Info: [tls] >>> Unknown TLS version [length 0005] Sat Aug 22 12:04:44 2015 : Info: [tls] >>> TLS 1.0 ChangeCipherSpec [length 0001] Sat Aug 22 12:04:44 2015 : Info: [tls] TLS_accept: unknown state Sat Aug 22 12:04:44 2015 : Info: [tls] >>> Unknown TLS version [length 0005] Sat Aug 22 12:04:44 2015 : Info: [tls] >>> TLS 1.0 Handshake [length 0010], Finished Sat Aug 22 12:04:44 2015 : Info: [tls] TLS_accept: unknown state Sat Aug 22 12:04:44 2015 : Info: [tls] TLS_accept: unknown state Sat Aug 22 12:04:44 2015 : Info: [tls] (other): SSL negotiation finished successfully Sat Aug 22 12:04:44 2015 : Debug: SSL Connection Established Sat Aug 22 12:04:44 2015 : Info: [tls] eaptls_process returned 13 Sat Aug 22 12:04:44 2015 : Info: ++[eap] = handled Sat Aug 22 12:04:44 2015 : Info: +} # group authenticate = handled Sat Aug 22 12:04:44 2015 : Info: Finished request 93. Sat Aug 22 12:04:44 2015 : Debug: Going to the next request Sat Aug 22 12:04:44 2015 : Debug: Thread 2 waiting to be assigned a request Sat Aug 22 12:04:44 2015 : Debug: Waking up in 0.9 seconds. Sat Aug 22 12:04:44 2015 : Debug: Thread 5 got semaphore Sat Aug 22 12:04:44 2015 : Debug: Thread 5 handling request 94, (19 handled so far) Sat Aug 22 12:04:44 2015 : Info: # Executing section authorize from file /etc/freeradius/sites-enabled/default Sat Aug 22 12:04:44 2015 : Info: +group authorize { Sat Aug 22 12:04:44 2015 : Info: ++[preprocess] = ok Sat Aug 22 12:04:44 2015 : Info: ++[chap] = noop Sat Aug 22 12:04:44 2015 : Info: ++[mschap] = noop Sat Aug 22 12:04:44 2015 : Info: ++[digest] = noop Sat Aug 22 12:04:44 2015 : Info: [suffix] No '@' in User-Name = "selen.kjonca", looking up realm NULL Sat Aug 22 12:04:44 2015 : Info: [suffix] No such realm "NULL" Sat Aug 22 12:04:44 2015 : Info: ++[suffix] = noop Sat Aug 22 12:04:44 2015 : Info: [eap] EAP packet type response id 159 length 6 Sat Aug 22 12:04:44 2015 : Info: [eap] No EAP Start, assuming it's an on-going EAP conversation Sat Aug 22 12:04:44 2015 : Info: ++[eap] = updated Sat Aug 22 12:04:44 2015 : Info: [files] users: Matched entry selen.kjonca at line 12 Sat Aug 22 12:04:44 2015 : Info: ++[files] = ok Sat Aug 22 12:04:44 2015 : Info: ++[expiration] = noop Sat Aug 22 12:04:44 2015 : Info: ++[logintime] = noop Sat Aug 22 12:04:44 2015 : Info: ++[pap] = noop Sat Aug 22 12:04:44 2015 : Info: +} # group authorize = updated Sat Aug 22 12:04:44 2015 : Info: Found Auth-Type = EAP Sat Aug 22 12:04:44 2015 : Info: # Executing group from file /etc/freeradius/sites-enabled/default Sat Aug 22 12:04:44 2015 : Info: +group authenticate { Sat Aug 22 12:04:44 2015 : Info: [eap] Request found, released from the list Sat Aug 22 12:04:44 2015 : Info: [eap] EAP/tls Sat Aug 22 12:04:44 2015 : Info: [eap] processing type tls Sat Aug 22 12:04:44 2015 : Info: [tls] Authenticate Sat Aug 22 12:04:44 2015 : Info: [tls] processing EAP-TLS Sat Aug 22 12:04:44 2015 : Info: [tls] Received TLS ACK Sat Aug 22 12:04:44 2015 : Info: [tls] ACK handshake is finished Sat Aug 22 12:04:44 2015 : Info: [tls] eaptls_verify returned 3 Sat Aug 22 12:04:44 2015 : Info: [tls] eaptls_process returned 3 Sat Aug 22 12:04:44 2015 : Info: [tls] Adding user data to cached session Sat Aug 22 12:04:44 2015 : Info: [eap] Freeing handler Sat Aug 22 12:04:44 2015 : Info: ++[eap] = ok Sat Aug 22 12:04:44 2015 : Info: +} # group authenticate = ok Sat Aug 22 12:04:44 2015 : Auth: Login OK: [selen.kjonca] (from client ni port 2 cli 00-08-22-4F-62-54) Sat Aug 22 12:04:44 2015 : Info: # Executing section post-auth from file /etc/freeradius/sites-enabled/default Sat Aug 22 12:04:44 2015 : Info: +group post-auth { Sat Aug 22 12:04:44 2015 : Info: ++[exec] = noop Sat Aug 22 12:04:44 2015 : Info: +} # group post-auth = noop Sat Aug 22 12:04:44 2015 : Info: Finished request 94. Sat Aug 22 12:04:44 2015 : Debug: Going to the next request Sat Aug 22 12:04:44 2015 : Debug: Thread 5 waiting to be assigned a request Sat Aug 22 12:04:45 2015 : Debug: Waking up in 3.9 seconds. Sat Aug 22 12:04:48 2015 : Info: Cleaning up request 89 ID 246 with timestamp +1696 Sat Aug 22 12:04:48 2015 : Info: Cleaning up request 90 ID 247 with timestamp +1696 Sat Aug 22 12:04:48 2015 : Info: Cleaning up request 91 ID 248 with timestamp +1696 Sat Aug 22 12:04:49 2015 : Info: Cleaning up request 92 ID 249 with timestamp +1697 Sat Aug 22 12:04:49 2015 : Info: Cleaning up request 93 ID 250 with timestamp +1697 Sat Aug 22 12:04:49 2015 : Info: Cleaning up request 94 ID 251 with timestamp +1697 Sat Aug 22 12:04:49 2015 : Info: Ready to process requests. Sat Aug 22 12:05:05 2015 : Debug: Thread 3 got semaphore Sat Aug 22 12:05:05 2015 : Debug: Waking up in 0.9 seconds. Sat Aug 22 12:05:05 2015 : Debug: Thread 3 handling request 95, (20 handled so far) Sat Aug 22 12:05:05 2015 : Info: # Executing section authorize from file /etc/freeradius/sites-enabled/default Sat Aug 22 12:05:05 2015 : Info: +group authorize { Sat Aug 22 12:05:05 2015 : Info: ++[preprocess] = ok Sat Aug 22 12:05:05 2015 : Info: ++[chap] = noop Sat Aug 22 12:05:05 2015 : Info: ++[mschap] = noop Sat Aug 22 12:05:05 2015 : Info: ++[digest] = noop Sat Aug 22 12:05:05 2015 : Info: [suffix] No '@' in User-Name = "selen.kjonca", looking up realm NULL Sat Aug 22 12:05:05 2015 : Info: [suffix] No such realm "NULL" Sat Aug 22 12:05:05 2015 : Info: ++[suffix] = noop Sat Aug 22 12:05:05 2015 : Info: [eap] EAP packet type response id 60 length 17 Sat Aug 22 12:05:05 2015 : Info: [eap] No EAP Start, assuming it's an on-going EAP conversation Sat Aug 22 12:05:05 2015 : Info: ++[eap] = updated Sat Aug 22 12:05:05 2015 : Info: [files] users: Matched entry selen.kjonca at line 12 Sat Aug 22 12:05:05 2015 : Info: ++[files] = ok Sat Aug 22 12:05:05 2015 : Info: ++[expiration] = noop Sat Aug 22 12:05:05 2015 : Info: ++[logintime] = noop Sat Aug 22 12:05:05 2015 : Info: [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. Sat Aug 22 12:05:05 2015 : Info: ++[pap] = noop Sat Aug 22 12:05:05 2015 : Info: +} # group authorize = updated Sat Aug 22 12:05:05 2015 : Info: Found Auth-Type = EAP Sat Aug 22 12:05:05 2015 : Info: # Executing group from file /etc/freeradius/sites-enabled/default Sat Aug 22 12:05:05 2015 : Info: +group authenticate { Sat Aug 22 12:05:05 2015 : Info: [eap] EAP Identity Sat Aug 22 12:05:05 2015 : Info: [eap] processing type tls Sat Aug 22 12:05:05 2015 : Info: [tls] Requiring client certificate Sat Aug 22 12:05:05 2015 : Info: [tls] Initiate Sat Aug 22 12:05:05 2015 : Info: [tls] Start returned 1 Sat Aug 22 12:05:05 2015 : Info: ++[eap] = handled Sat Aug 22 12:05:05 2015 : Info: +} # group authenticate = handled Sat Aug 22 12:05:05 2015 : Info: Finished request 95. Sat Aug 22 12:05:05 2015 : Debug: Going to the next request Sat Aug 22 12:05:05 2015 : Debug: Thread 3 waiting to be assigned a request Sat Aug 22 12:05:05 2015 : Debug: Waking up in 0.9 seconds. Sat Aug 22 12:05:05 2015 : Debug: Thread 4 got semaphore Sat Aug 22 12:05:05 2015 : Debug: Thread 4 handling request 96, (20 handled so far) Sat Aug 22 12:05:05 2015 : Info: # Executing section authorize from file /etc/freeradius/sites-enabled/default Sat Aug 22 12:05:05 2015 : Info: +group authorize { Sat Aug 22 12:05:05 2015 : Info: ++[preprocess] = ok Sat Aug 22 12:05:05 2015 : Info: ++[chap] = noop Sat Aug 22 12:05:05 2015 : Info: ++[mschap] = noop Sat Aug 22 12:05:05 2015 : Info: ++[digest] = noop Sat Aug 22 12:05:05 2015 : Info: [suffix] No '@' in User-Name = "selen.kjonca", looking up realm NULL Sat Aug 22 12:05:05 2015 : Info: [suffix] No such realm "NULL" Sat Aug 22 12:05:05 2015 : Info: ++[suffix] = noop Sat Aug 22 12:05:05 2015 : Info: [eap] EAP packet type response id 61 length 204 Sat Aug 22 12:05:05 2015 : Info: [eap] No EAP Start, assuming it's an on-going EAP conversation Sat Aug 22 12:05:05 2015 : Info: ++[eap] = updated Sat Aug 22 12:05:05 2015 : Info: [files] users: Matched entry selen.kjonca at line 12 Sat Aug 22 12:05:05 2015 : Info: ++[files] = ok Sat Aug 22 12:05:05 2015 : Info: ++[expiration] = noop Sat Aug 22 12:05:05 2015 : Info: ++[logintime] = noop Sat Aug 22 12:05:05 2015 : Info: ++[pap] = noop Sat Aug 22 12:05:05 2015 : Info: +} # group authorize = updated Sat Aug 22 12:05:05 2015 : Info: Found Auth-Type = EAP Sat Aug 22 12:05:05 2015 : Info: # Executing group from file /etc/freeradius/sites-enabled/default Sat Aug 22 12:05:05 2015 : Info: +group authenticate { Sat Aug 22 12:05:05 2015 : Info: [eap] Request found, released from the list Sat Aug 22 12:05:05 2015 : Info: [eap] EAP/tls Sat Aug 22 12:05:05 2015 : Info: [eap] processing type tls Sat Aug 22 12:05:05 2015 : Info: [tls] Authenticate Sat Aug 22 12:05:05 2015 : Info: [tls] processing EAP-TLS Sat Aug 22 12:05:05 2015 : Info: [tls] eaptls_verify returned 7 Sat Aug 22 12:05:05 2015 : Info: [tls] Done initial handshake Sat Aug 22 12:05:05 2015 : Info: [tls] (other): before/accept initialization Sat Aug 22 12:05:05 2015 : Info: [tls] TLS_accept: before/accept initialization Sat Aug 22 12:05:05 2015 : Info: [tls] <<< Unknown TLS version [length 0005] Sat Aug 22 12:05:05 2015 : Info: [tls] <<< TLS 1.0 Handshake [length 00c1], ClientHello Sat Aug 22 12:05:05 2015 : Info: [tls] TLS_accept: unknown state Sat Aug 22 12:05:05 2015 : Info: [tls] >>> Unknown TLS version [length 0005] Sat Aug 22 12:05:05 2015 : Info: [tls] >>> TLS 1.0 Handshake [length 0039], ServerHello Sat Aug 22 12:05:05 2015 : Info: [tls] TLS_accept: unknown state Sat Aug 22 12:05:05 2015 : Info: [tls] >>> Unknown TLS version [length 0005] Sat Aug 22 12:05:05 2015 : Info: [tls] >>> TLS 1.0 Handshake [length 0695], Certificate Sat Aug 22 12:05:05 2015 : Info: [tls] TLS_accept: unknown state Sat Aug 22 12:05:05 2015 : Info: [tls] >>> Unknown TLS version [length 0005] Sat Aug 22 12:05:05 2015 : Info: [tls] >>> TLS 1.0 Handshake [length 00cb], ServerKeyExchange Sat Aug 22 12:05:05 2015 : Info: [tls] TLS_accept: unknown state Sat Aug 22 12:05:05 2015 : Info: [tls] >>> Unknown TLS version [length 0005] Sat Aug 22 12:05:05 2015 : Info: [tls] >>> TLS 1.0 Handshake [length 000e], CertificateRequest Sat Aug 22 12:05:05 2015 : Info: [tls] TLS_accept: unknown state Sat Aug 22 12:05:05 2015 : Info: [tls] TLS_accept: unknown state Sat Aug 22 12:05:05 2015 : Info: [tls] TLS_accept: Need to read more data: unknown state Sat Aug 22 12:05:05 2015 : Debug: In SSL Handshake Phase Sat Aug 22 12:05:05 2015 : Debug: In SSL Accept mode Sat Aug 22 12:05:05 2015 : Info: [tls] eaptls_process returned 13 Sat Aug 22 12:05:05 2015 : Info: ++[eap] = handled Sat Aug 22 12:05:05 2015 : Info: +} # group authenticate = handled Sat Aug 22 12:05:05 2015 : Info: Finished request 96. Sat Aug 22 12:05:05 2015 : Debug: Going to the next request Sat Aug 22 12:05:05 2015 : Debug: Thread 4 waiting to be assigned a request Sat Aug 22 12:05:05 2015 : Debug: Waking up in 0.9 seconds. Sat Aug 22 12:05:05 2015 : Debug: Thread 1 got semaphore Sat Aug 22 12:05:05 2015 : Debug: Thread 1 handling request 97, (20 handled so far) Sat Aug 22 12:05:05 2015 : Info: # Executing section authorize from file /etc/freeradius/sites-enabled/default Sat Aug 22 12:05:05 2015 : Info: +group authorize { Sat Aug 22 12:05:05 2015 : Info: ++[preprocess] = ok Sat Aug 22 12:05:05 2015 : Info: ++[chap] = noop Sat Aug 22 12:05:05 2015 : Info: ++[mschap] = noop Sat Aug 22 12:05:05 2015 : Info: ++[digest] = noop Sat Aug 22 12:05:05 2015 : Info: [suffix] No '@' in User-Name = "selen.kjonca", looking up realm NULL Sat Aug 22 12:05:05 2015 : Info: [suffix] No such realm "NULL" Sat Aug 22 12:05:05 2015 : Info: ++[suffix] = noop Sat Aug 22 12:05:05 2015 : Info: [eap] EAP packet type response id 62 length 6 Sat Aug 22 12:05:05 2015 : Info: [eap] No EAP Start, assuming it's an on-going EAP conversation Sat Aug 22 12:05:05 2015 : Info: ++[eap] = updated Sat Aug 22 12:05:05 2015 : Info: [files] users: Matched entry selen.kjonca at line 12 Sat Aug 22 12:05:05 2015 : Info: ++[files] = ok Sat Aug 22 12:05:05 2015 : Info: ++[expiration] = noop Sat Aug 22 12:05:05 2015 : Info: ++[logintime] = noop Sat Aug 22 12:05:05 2015 : Info: ++[pap] = noop Sat Aug 22 12:05:05 2015 : Info: +} # group authorize = updated Sat Aug 22 12:05:05 2015 : Info: Found Auth-Type = EAP Sat Aug 22 12:05:05 2015 : Info: # Executing group from file /etc/freeradius/sites-enabled/default Sat Aug 22 12:05:05 2015 : Info: +group authenticate { Sat Aug 22 12:05:05 2015 : Info: [eap] Request found, released from the list Sat Aug 22 12:05:05 2015 : Info: [eap] EAP/tls Sat Aug 22 12:05:05 2015 : Info: [eap] processing type tls Sat Aug 22 12:05:05 2015 : Info: [tls] Authenticate Sat Aug 22 12:05:05 2015 : Info: [tls] processing EAP-TLS Sat Aug 22 12:05:05 2015 : Info: [tls] Received TLS ACK Sat Aug 22 12:05:05 2015 : Info: [tls] ACK handshake fragment handler Sat Aug 22 12:05:05 2015 : Info: [tls] eaptls_verify returned 1 Sat Aug 22 12:05:05 2015 : Info: [tls] eaptls_process returned 13 Sat Aug 22 12:05:05 2015 : Info: ++[eap] = handled Sat Aug 22 12:05:05 2015 : Info: +} # group authenticate = handled Sat Aug 22 12:05:05 2015 : Info: Finished request 97. Sat Aug 22 12:05:05 2015 : Debug: Going to the next request Sat Aug 22 12:05:05 2015 : Debug: Thread 1 waiting to be assigned a request Sat Aug 22 12:05:05 2015 : Debug: Waking up in 0.9 seconds. Sat Aug 22 12:05:05 2015 : Debug: Thread 2 got semaphore Sat Aug 22 12:05:05 2015 : Debug: Thread 2 handling request 98, (20 handled so far) Sat Aug 22 12:05:05 2015 : Info: # Executing section authorize from file /etc/freeradius/sites-enabled/default Sat Aug 22 12:05:05 2015 : Info: +group authorize { Sat Aug 22 12:05:05 2015 : Info: ++[preprocess] = ok Sat Aug 22 12:05:05 2015 : Info: ++[chap] = noop Sat Aug 22 12:05:05 2015 : Info: ++[mschap] = noop Sat Aug 22 12:05:05 2015 : Info: ++[digest] = noop Sat Aug 22 12:05:05 2015 : Info: [suffix] No '@' in User-Name = "selen.kjonca", looking up realm NULL Sat Aug 22 12:05:05 2015 : Info: [suffix] No such realm "NULL" Sat Aug 22 12:05:05 2015 : Info: ++[suffix] = noop Sat Aug 22 12:05:05 2015 : Info: [eap] EAP packet type response id 63 length 13 Sat Aug 22 12:05:05 2015 : Info: [eap] No EAP Start, assuming it's an on-going EAP conversation Sat Aug 22 12:05:05 2015 : Info: ++[eap] = updated Sat Aug 22 12:05:05 2015 : Info: [files] users: Matched entry selen.kjonca at line 12 Sat Aug 22 12:05:05 2015 : Info: ++[files] = ok Sat Aug 22 12:05:05 2015 : Info: ++[expiration] = noop Sat Aug 22 12:05:05 2015 : Info: ++[logintime] = noop Sat Aug 22 12:05:05 2015 : Info: ++[pap] = noop Sat Aug 22 12:05:05 2015 : Info: +} # group authorize = updated Sat Aug 22 12:05:05 2015 : Info: Found Auth-Type = EAP Sat Aug 22 12:05:05 2015 : Info: # Executing group from file /etc/freeradius/sites-enabled/default Sat Aug 22 12:05:05 2015 : Info: +group authenticate { Sat Aug 22 12:05:05 2015 : Info: [eap] Request found, released from the list Sat Aug 22 12:05:05 2015 : Info: [eap] EAP/tls Sat Aug 22 12:05:05 2015 : Info: [eap] processing type tls Sat Aug 22 12:05:05 2015 : Info: [tls] Authenticate Sat Aug 22 12:05:05 2015 : Info: [tls] processing EAP-TLS Sat Aug 22 12:05:05 2015 : Info: [tls] eaptls_verify returned 7 Sat Aug 22 12:05:05 2015 : Info: [tls] Done initial handshake Sat Aug 22 12:05:05 2015 : Info: [tls] <<< Unknown TLS version [length 0005] Sat Aug 22 12:05:05 2015 : Info: [tls] <<< TLS 1.0 Alert [length 0002], fatal unknown_ca Sat Aug 22 12:05:05 2015 : Error: TLS Alert read:fatal:unknown CA Sat Aug 22 12:05:05 2015 : Error: TLS_accept: failed in unknown state Sat Aug 22 12:05:05 2015 : Error: rlm_eap: SSL error error:14094418:SSL routines:ssl3_read_bytes:tlsv1 alert unknown ca Sat Aug 22 12:05:05 2015 : Error: SSL: SSL_read failed inside of TLS (-1), TLS session fails. Sat Aug 22 12:05:05 2015 : Debug: TLS receive handshake failed during operation Sat Aug 22 12:05:05 2015 : Info: [tls] eaptls_process returned 4 Sat Aug 22 12:05:05 2015 : Info: [eap] Handler failed in EAP/tls Sat Aug 22 12:05:05 2015 : Info: [eap] Failed in EAP select Sat Aug 22 12:05:05 2015 : Info: ++[eap] = invalid Sat Aug 22 12:05:05 2015 : Info: +} # group authenticate = invalid Sat Aug 22 12:05:05 2015 : Info: Failed to authenticate the user. Sat Aug 22 12:05:05 2015 : Auth: Login incorrect (TLS Alert read:fatal:unknown CA): [selen.kjonca] (from client ni port 2 cli 00-08-22-4F-62-54) Sat Aug 22 12:05:05 2015 : Info: Using Post-Auth-Type REJECT Sat Aug 22 12:05:05 2015 : Info: # Executing group from file /etc/freeradius/sites-enabled/default Sat Aug 22 12:05:05 2015 : Info: +group REJECT { Sat Aug 22 12:05:05 2015 : Info: [attr_filter.access_reject] expand: %{User-Name} -> selen.kjonca Sat Aug 22 12:05:05 2015 : Debug: attr_filter: Matched entry DEFAULT at line 11 Sat Aug 22 12:05:05 2015 : Info: ++[attr_filter.access_reject] = updated Sat Aug 22 12:05:05 2015 : Info: +} # group REJECT = updated Sat Aug 22 12:05:05 2015 : Info: Delaying reject of request 98 for 1 seconds Sat Aug 22 12:05:05 2015 : Debug: Going to the next request Sat Aug 22 12:05:05 2015 : Debug: Thread 2 waiting to be assigned a request Sat Aug 22 12:05:06 2015 : Info: Sending delayed reject for request 98 Sat Aug 22 12:05:06 2015 : Debug: Waking up in 3.9 seconds. Sat Aug 22 12:05:07 2015 : Debug: Thread 5 got semaphore Sat Aug 22 12:05:07 2015 : Debug: Waking up in 0.9 seconds. Sat Aug 22 12:05:07 2015 : Debug: Thread 5 handling request 99, (20 handled so far) Sat Aug 22 12:05:07 2015 : Info: # Executing section authorize from file /etc/freeradius/sites-enabled/default Sat Aug 22 12:05:07 2015 : Info: +group authorize { Sat Aug 22 12:05:07 2015 : Info: ++[preprocess] = ok Sat Aug 22 12:05:07 2015 : Info: ++[chap] = noop Sat Aug 22 12:05:07 2015 : Info: ++[mschap] = noop Sat Aug 22 12:05:07 2015 : Info: ++[digest] = noop Sat Aug 22 12:05:07 2015 : Info: [suffix] No '@' in User-Name = "selen.kjonca", looking up realm NULL Sat Aug 22 12:05:07 2015 : Info: [suffix] No such realm "NULL" Sat Aug 22 12:05:07 2015 : Info: ++[suffix] = noop Sat Aug 22 12:05:07 2015 : Info: [eap] EAP packet type response id 162 length 17 Sat Aug 22 12:05:07 2015 : Info: [eap] No EAP Start, assuming it's an on-going EAP conversation Sat Aug 22 12:05:07 2015 : Info: ++[eap] = updated Sat Aug 22 12:05:07 2015 : Info: [files] users: Matched entry selen.kjonca at line 12 Sat Aug 22 12:05:07 2015 : Info: ++[files] = ok Sat Aug 22 12:05:07 2015 : Info: ++[expiration] = noop Sat Aug 22 12:05:07 2015 : Info: ++[logintime] = noop Sat Aug 22 12:05:07 2015 : Info: [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. Sat Aug 22 12:05:07 2015 : Info: ++[pap] = noop Sat Aug 22 12:05:07 2015 : Info: +} # group authorize = updated Sat Aug 22 12:05:07 2015 : Info: Found Auth-Type = EAP Sat Aug 22 12:05:07 2015 : Info: # Executing group from file /etc/freeradius/sites-enabled/default Sat Aug 22 12:05:07 2015 : Info: +group authenticate { Sat Aug 22 12:05:07 2015 : Info: [eap] EAP Identity Sat Aug 22 12:05:07 2015 : Info: [eap] processing type tls Sat Aug 22 12:05:07 2015 : Info: [tls] Requiring client certificate Sat Aug 22 12:05:07 2015 : Info: [tls] Initiate Sat Aug 22 12:05:07 2015 : Info: [tls] Start returned 1 Sat Aug 22 12:05:07 2015 : Info: ++[eap] = handled Sat Aug 22 12:05:07 2015 : Info: +} # group authenticate = handled Sat Aug 22 12:05:07 2015 : Info: Finished request 99. Sat Aug 22 12:05:07 2015 : Debug: Going to the next request Sat Aug 22 12:05:07 2015 : Debug: Thread 5 waiting to be assigned a request Sat Aug 22 12:05:07 2015 : Debug: Waking up in 0.9 seconds. Sat Aug 22 12:05:07 2015 : Debug: Thread 3 got semaphore Sat Aug 22 12:05:07 2015 : Debug: Thread 3 handling request 100, (21 handled so far) Sat Aug 22 12:05:07 2015 : Info: # Executing section authorize from file /etc/freeradius/sites-enabled/default Sat Aug 22 12:05:07 2015 : Info: +group authorize { Sat Aug 22 12:05:07 2015 : Info: ++[preprocess] = ok Sat Aug 22 12:05:07 2015 : Info: ++[chap] = noop Sat Aug 22 12:05:07 2015 : Info: ++[mschap] = noop Sat Aug 22 12:05:07 2015 : Info: ++[digest] = noop Sat Aug 22 12:05:07 2015 : Info: [suffix] No '@' in User-Name = "selen.kjonca", looking up realm NULL Sat Aug 22 12:05:07 2015 : Info: [suffix] No such realm "NULL" Sat Aug 22 12:05:07 2015 : Info: ++[suffix] = noop Sat Aug 22 12:05:07 2015 : Info: [eap] EAP packet type response id 163 length 204 Sat Aug 22 12:05:07 2015 : Info: [eap] No EAP Start, assuming it's an on-going EAP conversation Sat Aug 22 12:05:07 2015 : Info: ++[eap] = updated Sat Aug 22 12:05:07 2015 : Info: [files] users: Matched entry selen.kjonca at line 12 Sat Aug 22 12:05:07 2015 : Info: ++[files] = ok Sat Aug 22 12:05:07 2015 : Info: ++[expiration] = noop Sat Aug 22 12:05:07 2015 : Info: ++[logintime] = noop Sat Aug 22 12:05:07 2015 : Info: ++[pap] = noop Sat Aug 22 12:05:07 2015 : Info: +} # group authorize = updated Sat Aug 22 12:05:07 2015 : Info: Found Auth-Type = EAP Sat Aug 22 12:05:07 2015 : Info: # Executing group from file /etc/freeradius/sites-enabled/default Sat Aug 22 12:05:07 2015 : Info: +group authenticate { Sat Aug 22 12:05:07 2015 : Info: [eap] Request found, released from the list Sat Aug 22 12:05:07 2015 : Info: [eap] EAP/tls Sat Aug 22 12:05:07 2015 : Info: [eap] processing type tls Sat Aug 22 12:05:07 2015 : Info: [tls] Authenticate Sat Aug 22 12:05:07 2015 : Info: [tls] processing EAP-TLS Sat Aug 22 12:05:07 2015 : Info: [tls] eaptls_verify returned 7 Sat Aug 22 12:05:07 2015 : Info: [tls] Done initial handshake Sat Aug 22 12:05:07 2015 : Info: [tls] (other): before/accept initialization Sat Aug 22 12:05:07 2015 : Info: [tls] TLS_accept: before/accept initialization Sat Aug 22 12:05:07 2015 : Info: [tls] <<< Unknown TLS version [length 0005] Sat Aug 22 12:05:07 2015 : Info: [tls] <<< TLS 1.0 Handshake [length 00c1], ClientHello Sat Aug 22 12:05:07 2015 : Info: [tls] TLS_accept: unknown state Sat Aug 22 12:05:07 2015 : Info: [tls] >>> Unknown TLS version [length 0005] Sat Aug 22 12:05:07 2015 : Info: [tls] >>> TLS 1.0 Handshake [length 0039], ServerHello Sat Aug 22 12:05:07 2015 : Info: [tls] TLS_accept: unknown state Sat Aug 22 12:05:07 2015 : Info: [tls] >>> Unknown TLS version [length 0005] Sat Aug 22 12:05:07 2015 : Info: [tls] >>> TLS 1.0 Handshake [length 0695], Certificate Sat Aug 22 12:05:07 2015 : Info: [tls] TLS_accept: unknown state Sat Aug 22 12:05:07 2015 : Info: [tls] >>> Unknown TLS version [length 0005] Sat Aug 22 12:05:07 2015 : Info: [tls] >>> TLS 1.0 Handshake [length 00cb], ServerKeyExchange Sat Aug 22 12:05:07 2015 : Info: [tls] TLS_accept: unknown state Sat Aug 22 12:05:07 2015 : Info: [tls] >>> Unknown TLS version [length 0005] Sat Aug 22 12:05:07 2015 : Info: [tls] >>> TLS 1.0 Handshake [length 000e], CertificateRequest Sat Aug 22 12:05:07 2015 : Info: [tls] TLS_accept: unknown state Sat Aug 22 12:05:07 2015 : Info: [tls] TLS_accept: unknown state Sat Aug 22 12:05:07 2015 : Info: [tls] TLS_accept: Need to read more data: unknown state Sat Aug 22 12:05:07 2015 : Debug: In SSL Handshake Phase Sat Aug 22 12:05:07 2015 : Debug: In SSL Accept mode Sat Aug 22 12:05:07 2015 : Info: [tls] eaptls_process returned 13 Sat Aug 22 12:05:07 2015 : Info: ++[eap] = handled Sat Aug 22 12:05:07 2015 : Info: +} # group authenticate = handled Sat Aug 22 12:05:07 2015 : Info: Finished request 100. Sat Aug 22 12:05:07 2015 : Debug: Going to the next request Sat Aug 22 12:05:07 2015 : Debug: Thread 3 waiting to be assigned a request Sat Aug 22 12:05:07 2015 : Debug: Waking up in 0.9 seconds. Sat Aug 22 12:05:07 2015 : Debug: Thread 4 got semaphore Sat Aug 22 12:05:07 2015 : Debug: Thread 4 handling request 101, (21 handled so far) Sat Aug 22 12:05:07 2015 : Info: # Executing section authorize from file /etc/freeradius/sites-enabled/default Sat Aug 22 12:05:07 2015 : Info: +group authorize { Sat Aug 22 12:05:07 2015 : Info: ++[preprocess] = ok Sat Aug 22 12:05:07 2015 : Info: ++[chap] = noop Sat Aug 22 12:05:07 2015 : Info: ++[mschap] = noop Sat Aug 22 12:05:07 2015 : Info: ++[digest] = noop Sat Aug 22 12:05:07 2015 : Info: [suffix] No '@' in User-Name = "selen.kjonca", looking up realm NULL Sat Aug 22 12:05:07 2015 : Info: [suffix] No such realm "NULL" Sat Aug 22 12:05:07 2015 : Info: ++[suffix] = noop Sat Aug 22 12:05:07 2015 : Info: [eap] EAP packet type response id 164 length 6 Sat Aug 22 12:05:07 2015 : Info: [eap] No EAP Start, assuming it's an on-going EAP conversation Sat Aug 22 12:05:07 2015 : Info: ++[eap] = updated Sat Aug 22 12:05:07 2015 : Info: [files] users: Matched entry selen.kjonca at line 12 Sat Aug 22 12:05:07 2015 : Info: ++[files] = ok Sat Aug 22 12:05:07 2015 : Info: ++[expiration] = noop Sat Aug 22 12:05:07 2015 : Info: ++[logintime] = noop Sat Aug 22 12:05:07 2015 : Info: ++[pap] = noop Sat Aug 22 12:05:07 2015 : Info: +} # group authorize = updated Sat Aug 22 12:05:07 2015 : Info: Found Auth-Type = EAP Sat Aug 22 12:05:07 2015 : Info: # Executing group from file /etc/freeradius/sites-enabled/default Sat Aug 22 12:05:07 2015 : Info: +group authenticate { Sat Aug 22 12:05:07 2015 : Info: [eap] Request found, released from the list Sat Aug 22 12:05:07 2015 : Info: [eap] EAP/tls Sat Aug 22 12:05:07 2015 : Info: [eap] processing type tls Sat Aug 22 12:05:07 2015 : Info: [tls] Authenticate Sat Aug 22 12:05:07 2015 : Info: [tls] processing EAP-TLS Sat Aug 22 12:05:07 2015 : Info: [tls] Received TLS ACK Sat Aug 22 12:05:07 2015 : Info: [tls] ACK handshake fragment handler Sat Aug 22 12:05:07 2015 : Info: [tls] eaptls_verify returned 1 Sat Aug 22 12:05:07 2015 : Info: [tls] eaptls_process returned 13 Sat Aug 22 12:05:07 2015 : Info: ++[eap] = handled Sat Aug 22 12:05:07 2015 : Info: +} # group authenticate = handled Sat Aug 22 12:05:07 2015 : Info: Finished request 101. Sat Aug 22 12:05:07 2015 : Debug: Going to the next request Sat Aug 22 12:05:07 2015 : Debug: Thread 4 waiting to be assigned a request Sat Aug 22 12:05:07 2015 : Debug: Waking up in 0.9 seconds. Sat Aug 22 12:05:07 2015 : Debug: Thread 1 got semaphore Sat Aug 22 12:05:07 2015 : Debug: Thread 1 handling request 102, (21 handled so far) Sat Aug 22 12:05:07 2015 : Info: # Executing section authorize from file /etc/freeradius/sites-enabled/default Sat Aug 22 12:05:07 2015 : Info: +group authorize { Sat Aug 22 12:05:07 2015 : Info: ++[preprocess] = ok Sat Aug 22 12:05:07 2015 : Info: ++[chap] = noop Sat Aug 22 12:05:07 2015 : Info: ++[mschap] = noop Sat Aug 22 12:05:07 2015 : Info: ++[digest] = noop Sat Aug 22 12:05:07 2015 : Info: [suffix] No '@' in User-Name = "selen.kjonca", looking up realm NULL Sat Aug 22 12:05:07 2015 : Info: [suffix] No such realm "NULL" Sat Aug 22 12:05:07 2015 : Info: ++[suffix] = noop Sat Aug 22 12:05:07 2015 : Info: [eap] EAP packet type response id 165 length 13 Sat Aug 22 12:05:07 2015 : Info: [eap] No EAP Start, assuming it's an on-going EAP conversation Sat Aug 22 12:05:07 2015 : Info: ++[eap] = updated Sat Aug 22 12:05:07 2015 : Info: [files] users: Matched entry selen.kjonca at line 12 Sat Aug 22 12:05:07 2015 : Info: ++[files] = ok Sat Aug 22 12:05:07 2015 : Info: ++[expiration] = noop Sat Aug 22 12:05:07 2015 : Info: ++[logintime] = noop Sat Aug 22 12:05:07 2015 : Info: ++[pap] = noop Sat Aug 22 12:05:07 2015 : Info: +} # group authorize = updated Sat Aug 22 12:05:07 2015 : Info: Found Auth-Type = EAP Sat Aug 22 12:05:07 2015 : Info: # Executing group from file /etc/freeradius/sites-enabled/default Sat Aug 22 12:05:07 2015 : Info: +group authenticate { Sat Aug 22 12:05:07 2015 : Info: [eap] Request found, released from the list Sat Aug 22 12:05:07 2015 : Info: [eap] EAP/tls Sat Aug 22 12:05:07 2015 : Info: [eap] processing type tls Sat Aug 22 12:05:07 2015 : Info: [tls] Authenticate Sat Aug 22 12:05:07 2015 : Info: [tls] processing EAP-TLS Sat Aug 22 12:05:07 2015 : Info: [tls] eaptls_verify returned 7 Sat Aug 22 12:05:07 2015 : Info: [tls] Done initial handshake Sat Aug 22 12:05:07 2015 : Info: [tls] <<< Unknown TLS version [length 0005] Sat Aug 22 12:05:07 2015 : Info: [tls] <<< TLS 1.0 Alert [length 0002], fatal unknown_ca Sat Aug 22 12:05:07 2015 : Error: TLS Alert read:fatal:unknown CA Sat Aug 22 12:05:07 2015 : Error: TLS_accept: failed in unknown state Sat Aug 22 12:05:07 2015 : Error: rlm_eap: SSL error error:14094418:SSL routines:ssl3_read_bytes:tlsv1 alert unknown ca Sat Aug 22 12:05:07 2015 : Error: SSL: SSL_read failed inside of TLS (-1), TLS session fails. Sat Aug 22 12:05:07 2015 : Debug: TLS receive handshake failed during operation Sat Aug 22 12:05:07 2015 : Info: [tls] eaptls_process returned 4 Sat Aug 22 12:05:07 2015 : Info: [eap] Handler failed in EAP/tls Sat Aug 22 12:05:07 2015 : Info: [eap] Failed in EAP select Sat Aug 22 12:05:07 2015 : Info: ++[eap] = invalid Sat Aug 22 12:05:07 2015 : Info: +} # group authenticate = invalid Sat Aug 22 12:05:07 2015 : Info: Failed to authenticate the user. Sat Aug 22 12:05:07 2015 : Auth: Login incorrect (TLS Alert read:fatal:unknown CA): [selen.kjonca] (from client ni port 2 cli 00-08-22-4F-62-54) Sat Aug 22 12:05:07 2015 : Info: Using Post-Auth-Type REJECT Sat Aug 22 12:05:07 2015 : Info: # Executing group from file /etc/freeradius/sites-enabled/default Sat Aug 22 12:05:07 2015 : Info: +group REJECT { Sat Aug 22 12:05:07 2015 : Info: [attr_filter.access_reject] expand: %{User-Name} -> selen.kjonca Sat Aug 22 12:05:07 2015 : Debug: attr_filter: Matched entry DEFAULT at line 11 Sat Aug 22 12:05:07 2015 : Info: ++[attr_filter.access_reject] = updated Sat Aug 22 12:05:07 2015 : Info: +} # group REJECT = updated Sat Aug 22 12:05:07 2015 : Info: Delaying reject of request 102 for 1 seconds Sat Aug 22 12:05:07 2015 : Debug: Going to the next request Sat Aug 22 12:05:07 2015 : Debug: Thread 1 waiting to be assigned a request Sat Aug 22 12:05:08 2015 : Info: Sending delayed reject for request 102 Sat Aug 22 12:05:08 2015 : Debug: Waking up in 1.7 seconds. Sat Aug 22 12:05:10 2015 : Info: Cleaning up request 95 ID 252 with timestamp +1718 Sat Aug 22 12:05:10 2015 : Info: Cleaning up request 96 ID 253 with timestamp +1718 Sat Aug 22 12:05:10 2015 : Info: Cleaning up request 97 ID 254 with timestamp +1718 Sat Aug 22 12:05:10 2015 : Debug: Waking up in 1.0 seconds. Sat Aug 22 12:05:11 2015 : Info: Cleaning up request 98 ID 255 with timestamp +1718 Sat Aug 22 12:05:11 2015 : Debug: Waking up in 1.2 seconds. Sat Aug 22 12:05:12 2015 : Info: Cleaning up request 99 ID 0 with timestamp +1720 Sat Aug 22 12:05:12 2015 : Info: Cleaning up request 100 ID 1 with timestamp +1720 Sat Aug 22 12:05:12 2015 : Info: Cleaning up request 101 ID 2 with timestamp +1720 Sat Aug 22 12:05:12 2015 : Debug: Waking up in 1.0 seconds. Sat Aug 22 12:05:13 2015 : Info: Cleaning up request 102 ID 3 with timestamp +1720 Sat Aug 22 12:05:13 2015 : Info: Ready to process requests. -- http://wolnelektury.pl/wesprzyj/teraz/ share, n.: To give in, endure humiliation.

3 7

freeradius not starting when default rediswho module is enabled - freeradius 3.0.10 - current git
by Michal Tomaszewski 21 Aug '15

21 Aug '15

Hi all, After enabling rediswho module and adding rediswho to accounting section (and only this section) there is an error: Fri Aug 21 16:06:29 2015 : Debug: Loading library using absolute path "//lib/rlm_rediswho.so" Fri Aug 21 16:06:29 2015 : Debug: Loaded rlm_rediswho, checking if it's valid Fri Aug 21 16:06:29 2015 : Debug: # Loaded module rlm_rediswho Fri Aug 21 16:06:29 2015 : Debug: # Loading module "rediswho" from file //etc/raddb/mods-enabled/rediswho Fri Aug 21 16:06:29 2015 : Debug: rediswho { Fri Aug 21 16:06:29 2015 : Debug: redis_module_instance = "redis" Fri Aug 21 16:06:29 2015 : Debug: trim_count = 15 Fri Aug 21 16:06:29 2015 : Error: //etc/raddb/mods-enabled/rediswho[10]: Configuration item "insert" must have a value Fri Aug 21 16:06:29 2015 : Error: //etc/raddb/mods-enabled/rediswho[10]: Invalid configuration for module "rediswho" Default configuration of rediswho from mods-enabled is used. As I understand the file /mods-available/rediswho should have e.g. changed sections. It probably has changed since freeradius 2.x. Can you advice the correct one? Regards, Michał Tomaszewski ________________________________________ Uwaga: Treść niniejszej wiadomości może być poufna i objęta zakazem jej ujawniania. Jeśli czytelnik tej wiadomości nie jest jej zamierzonym adresatem, pracownikiem lub pośrednikiem upoważnionym do jej przekazania adresatowi, informujemy że wszelkie rozprowadzanie, rozpowszechnianie lub powielanie niniejszej wiadomości jest zabronione. Jeśli otrzymałeś tę wiadomość omyłkowo, proszę bezzwłocznie odesłać ją nadawcy, a samą wiadomość usunąć z komputera. Dziękujemy. ________________________________ Note: The information contained in this message may be privileged and confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited.If you have received this communication in error, please notify the sender immediately by replying to the message and deleting it from your computer. Thank you. ________________________________

2 2

PAM_Radius EAP-TTLS
by Qrious 21 Aug '15

21 Aug '15

Hi, I'm setting up a RADIUS server which among others has to be linked to PAM. One of my primary requirements is that is uses secure cryptography. The main question is: 1. Does the PAM Radius module support EAP-TTLS with an inner tunnel of PAP? I did some research and came accross http://lists.freeradius.org/pipermail/freeradius-users/2013-December/069408…, which unfortunately doesn't answer my question. I scanned through the sourcecode of the PAM_radius module, which does not have any indication of TLS support. Background: Most supported protocols are based on MD5, which has been severly comprimised[1], or a single DES key (MSCHAP V2) [2], which is also comprimised. So that only leaves the TLS based protocols, Based on [3] I assume I should use PAP for the inner tunnel, because this enables me to store hashed password (will use SSHA512). If you know a more secure setup, don't hesitate to advice me :). Also if I made a mistake somewhere, don't hesitate to correct me :) As a final remark, I think it would be beneficial for the security of many account details, both transfered and stored for (FREE)RADIUS, to include clear warnings on the pages about insecure protocols/authentication standards. [1] https://en.wikipedia.org/wiki/MD5 [2] https://www.cloudcracker.com/blog/2012/07/29/cracking-ms-chap-v2/ [3] http://deployingradius.com/documents/protocols/compatibility.html

3 5

rlm_counter in v3.1.x
by Arran Cudbard-Bell 21 Aug '15

21 Aug '15

The width of the counter fields in rlm_counter has been increased to 64bits in v3.1.x. When upgrading you will need to re-create the counter databases, or move to rlm_sqlcounter. If anyone using rlm_counter has a huge issue with this, then let us know, and we'll determine a better upgrade path. This is also mentioned in the v3.0.x -> v3.1.x upgrade document. https://github.com/FreeRADIUS/freeradius-server/tree/v3.1.x/raddb I suspect not many people use the GDBM based modules anymore, and that they're mostly vestigial. -Arran

1 0