- Freeradius-Users - lists.freeradius.org

Help with eduroam proxying config
by Mohamed Lrhazi 13 Mar '15

13 Mar '15

Hello, With this config, I want to say: anyuser(a)anything.edu should go to eduroam, but I get a warning that it wont be the case.. What's the correct config: Thanks a lot, Mohamed. proxy.conf: home_server eduroam1 { type = auth ipaddr = tlrs1.eduroam.us port = 1645 secret = eduroam_radius_secret } home_server eduroam2 { type = auth ipaddr = tlrs2.eduroam.us port = 1645 secret = eduroam_radius_secret } home_server_pool eduroam { type = fail-over home_server = eduroam1 home_server = eduroam2 } realm LOCAL { } realm NULL { } realm georgetown.edu { } realm gu.edu { } realm "~(.*\\.)+edu$" { nostrip auth_pool = eduroam } realm DEFAULT{ nostrip } radius/radacct/172.17.0.187/auth-detail-20150311 (0) auth_log : EXPAND %t (0) auth_log : --> Wed Mar 11 14:32:10 2015 (0) [auth_log] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix : Looking up realm "foo.edu" for User-Name = "ml623(a)foo.edu" (0) suffix : Found realm "~(.*\.)+edu$" (0) suffix : Adding Realm = "foo.edu" (0) suffix : Proxying request from user ml623(a)foo.edu to realm ~(.*\.)+edu$ (0) suffix : Preparing to proxy authentication request to realm "~(.*\.)+edu$" (0) [suffix] = updated (0) if ("%{Realm}" != 'NULL' && "%{Realm}" != 'LOCAL' && "%{Realm}" !~ /\\.edu$/) (0) EXPAND %{Realm} (0) --> foo.edu (0) EXPAND %{Realm} (0) --> foo.edu (0) EXPAND %{Realm} (0) --> foo.edu (0) if ("%{Realm}" != 'NULL' && "%{Realm}" != 'LOCAL' && "%{Realm}" !~ /\\.edu$/) -> FALSE (0) eap : EAP packet type response id 0 length 18 (0) eap : EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) WARNING: You set Proxy-To-Realm = DEFAULT, but it is a LOCAL realm! Cancelling proxy request. (0) Found Auth-Type = EAP

3 4

Freeadius2 with EAP-TLS - cert not available on iOS 8.2
by IT geek 31 12 Mar '15

12 Mar '15

Hi, I've finally got Freeradius 2.2.0 running on NetBSD 5.2.2 using EAP with MSCHAPv2 (and I'm very happy!). However, I'm trying to get EAP-TLS working. My CA and server certificates build and install brilliantly, but my whilst my iPhone (iOS 8.2) lets me import my client certificate, it doesn't offer to let me use it for authentication for EAP-TLS. Any ideas what I might be missing? Any help would be appreciated, Thanks, -Mark Full radiusd -X: FreeRADIUS Version 2.2.0, for host mipsel--netbsd, built on Mar 5 2015 at 23:15:08 Copyright (C) 1999-2012 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /usr/pkg/etc/raddb/radiusd.conf including configuration file /usr/pkg/etc/raddb/proxy.conf including configuration file /usr/pkg/etc/raddb/clients.conf including files in directory /usr/pkg/etc/raddb/modules/ including configuration file /usr/pkg/etc/raddb/modules/acct_unique including configuration file /usr/pkg/etc/raddb/modules/always including configuration file /usr/pkg/etc/raddb/modules/attr_filter including configuration file /usr/pkg/etc/raddb/modules/attr_rewrite including configuration file /usr/pkg/etc/raddb/modules/chap including configuration file /usr/pkg/etc/raddb/modules/checkval including configuration file /usr/pkg/etc/raddb/modules/counter including configuration file /usr/pkg/etc/raddb/modules/detail including configuration file /usr/pkg/etc/raddb/modules/detail.example.com including configuration file /usr/pkg/etc/raddb/modules/detail.log including configuration file /usr/pkg/etc/raddb/modules/digest including configuration file /usr/pkg/etc/raddb/modules/echo including configuration file /usr/pkg/etc/raddb/modules/etc_group including configuration file /usr/pkg/etc/raddb/modules/exec including configuration file /usr/pkg/etc/raddb/modules/expiration including configuration file /usr/pkg/etc/raddb/modules/expr including configuration file /usr/pkg/etc/raddb/modules/files including configuration file /usr/pkg/etc/raddb/modules/inner-eap including configuration file /usr/pkg/etc/raddb/modules/ippool including configuration file /usr/pkg/etc/raddb/modules/krb5 including configuration file /usr/pkg/etc/raddb/modules/ldap including configuration file /usr/pkg/etc/raddb/modules/linelog including configuration file /usr/pkg/etc/raddb/modules/logintime including configuration file /usr/pkg/etc/raddb/modules/mac2ip including configuration file /usr/pkg/etc/raddb/modules/mac2vlan including configuration file /usr/pkg/etc/raddb/modules/mschap including configuration file /usr/pkg/etc/raddb/modules/otp including configuration file /usr/pkg/etc/raddb/modules/pam including configuration file /usr/pkg/etc/raddb/modules/pap including configuration file /usr/pkg/etc/raddb/modules/passwd including configuration file /usr/pkg/etc/raddb/modules/perl including configuration file /usr/pkg/etc/raddb/modules/policy including configuration file /usr/pkg/etc/raddb/modules/preprocess including configuration file /usr/pkg/etc/raddb/modules/radutmp including configuration file /usr/pkg/etc/raddb/modules/realm including configuration file /usr/pkg/etc/raddb/modules/smbpasswd including configuration file /usr/pkg/etc/raddb/modules/smsotp including configuration file /usr/pkg/etc/raddb/modules/sql_log including configuration file /usr/pkg/etc/raddb/modules/sqlcounter_expire_on_login including configuration file /usr/pkg/etc/raddb/modules/sradutmp including configuration file /usr/pkg/etc/raddb/modules/unix including configuration file /usr/pkg/etc/raddb/modules/wimax including configuration file /usr/pkg/etc/raddb/eap.conf including configuration file /usr/pkg/etc/raddb/policy.conf including files in directory /usr/pkg/etc/raddb/sites-enabled/ including configuration file /usr/pkg/etc/raddb/sites-enabled/default including configuration file /usr/pkg/etc/raddb/sites-enabled/inner-tunnel main { user = "radius" group = "radius" allow_core_dumps = no } including dictionary file /usr/pkg/etc/raddb/dictionary main { name = "radiusd" prefix = "/usr/pkg" localstatedir = "/var" sbindir = "/usr/pkg/sbin" logdir = "/var/log/radiusd" run_dir = "/var/run/radiusd" libdir = "/usr/pkg/lib" radacctdir = "/var/log/radiusd/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/pkg/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 require_message_authenticator = yes zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } client ap { ipaddr = 192.168.1.10 require_message_authenticator = no secret = "mysecret" nastype = "Wireless-802.11" } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating module "exec" from file /usr/pkg/etc/raddb/modules/exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating module "expr" from file /usr/pkg/etc/raddb/modules/expr Module: Linked to module rlm_expiration Module: Instantiating module "expiration" from file /usr/pkg/etc/raddb/modules/expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating module "logintime" from file /usr/pkg/etc/raddb/modules/logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server { # from file /usr/pkg/etc/raddb/radiusd.conf modules { Module: Creating Auth-Type = digest Module: Creating Post-Auth-Type = REJECT Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating module "pap" from file /usr/pkg/etc/raddb/modules/pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating module "chap" from file /usr/pkg/etc/raddb/modules/chap Module: Linked to module rlm_mschap Module: Instantiating module "mschap" from file /usr/pkg/etc/raddb/modules/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no allow_retry = yes } Module: Linked to module rlm_digest Module: Instantiating module "digest" from file /usr/pkg/etc/raddb/modules/digest Module: Linked to module rlm_unix Module: Instantiating module "unix" from file /usr/pkg/etc/raddb/modules/unix unix { radwtmp = "/var/log/radiusd/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating module "eap" from file /usr/pkg/etc/raddb/eap.conf eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 4096 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 CA_path = "/usr/pkg/etc/raddb/certs" pem_file_type = yes private_key_file = "/usr/pkg/etc/raddb/certs/server.pem" certificate_file = "/usr/pkg/etc/raddb/certs/server.pem" CA_file = "/usr/pkg/etc/raddb/certs/ca.pem" private_key_password = "mysecret" dh_file = "/usr/pkg/etc/raddb/certs/dh" random_file = "/usr/pkg/etc/raddb/certs/random" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" ecdh_curve = "prime256v1" cache { enable = no lifetime = 24 max_entries = 255 } verify { } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating module "preprocess" from file /usr/pkg/etc/raddb/modules/preprocess preprocess { huntgroups = "/usr/pkg/etc/raddb/huntgroups" hints = "/usr/pkg/etc/raddb/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } reading pairlist file /usr/pkg/etc/raddb/huntgroups reading pairlist file /usr/pkg/etc/raddb/hints Module: Linked to module rlm_realm Module: Instantiating module "suffix" from file /usr/pkg/etc/raddb/modules/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating module "files" from file /usr/pkg/etc/raddb/modules/files files { usersfile = "/usr/pkg/etc/raddb/users" acctusersfile = "/usr/pkg/etc/raddb/acct_users" preproxy_usersfile = "/usr/pkg/etc/raddb/preproxy_users" compat = "no" } reading pairlist file /usr/pkg/etc/raddb/users reading pairlist file /usr/pkg/etc/raddb/acct_users reading pairlist file /usr/pkg/etc/raddb/preproxy_users Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating module "acct_unique" from file /usr/pkg/etc/raddb/modules/acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, NAS-Identifier, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating module "detail" from file /usr/pkg/etc/raddb/modules/detail detail { detailfile = "/var/log/radiusd/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Linked to module rlm_attr_filter Module: Instantiating module "attr_filter.accounting_response" from file /usr/pkg/etc/raddb/modules/attr_filter attr_filter attr_filter.accounting_response { attrsfile = "/usr/pkg/etc/raddb/attrs.accounting_response" key = "%{User-Name}" relaxed = no } reading pairlist file /usr/pkg/etc/raddb/attrs.accounting_response Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating module "radutmp" from file /usr/pkg/etc/raddb/modules/radutmp radutmp { filename = "/var/log/radiusd/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Instantiating module "attr_filter.access_reject" from file /usr/pkg/etc/raddb/modules/attr_filter attr_filter attr_filter.access_reject { attrsfile = "/usr/pkg/etc/raddb/attrs.access_reject" key = "%{User-Name}" relaxed = no } reading pairlist file /usr/pkg/etc/raddb/attrs.access_reject } # modules } # server server inner-tunnel { # from file /usr/pkg/etc/raddb/sites-enabled/inner-tunnel modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = 192.168.1.1 port = 0 } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } ... adding new socket proxy address * port 64838 Listening on authentication address * port 1812 Listening on accounting address 192.168.1.1 port 1813 Listening on authentication address 127.0.0.1 port 18120 as server inner-tunnel Listening on proxy address * port 1814 Ready to process requests.

3 7

Sql redundancy
by Paul 12 Mar '15

12 Mar '15

Hi, I have configured 2 sql instances (db1 and db2) used in authorize and accounting sections. Freeradius v3.0.4. /etc/raddb/mods-available/sql (the entire file): sql db1{ driver = "rlm_sql_mysql" dialect = "mysql" server = "172.16.20.6" port = 3306 login = "radius" password = "xxx" radius_db = "radius" acct_table1 = "radacct" acct_table2 = "radacct" postauth_table = "radpostauth" authcheck_table = "radcheck" groupcheck_table = "radgroupcheck" authreply_table = "radreply" groupreply_table = "radgroupreply" usergroup_table = "radusergroup" delete_stale_sessions = yes pool { start = 5 min = 4 max = ${thread[pool].max_servers} spare = 3 uses = 0 lifetime = 0 idle_timeout = 60 } client_table = "nas" $INCLUDE ${modconfdir}/${.:name}/main/${dialect}/queries.conf } sql db2{ driver = "rlm_sql_mysql" dialect = "mysql" server = "172.16.20.14" port = 3306 login = "radius" password = "xxx" radius_db = "radius" acct_table1 = "radacct" acct_table2 = "radacct" postauth_table = "radpostauth" authcheck_table = "radcheck" groupcheck_table = "radgroupcheck" authreply_table = "radreply" groupreply_table = "radgroupreply" usergroup_table = "radusergroup" delete_stale_sessions = yes pool { # Number of connections to start start = 5 min = 4 max = ${thread[pool].max_servers} spare = 3 uses = 0 lifetime = 0 idle_timeout = 60 } client_table = "nas" $INCLUDE ${modconfdir}/${.:name}/main/${dialect}/queries.conf } /etc/raddb/sites-enabled/pppoe_null (irrelevant portions omitted): server srv_null { authorize { (...) redundant { db1 db2 } (...) } accounting { redundant { db1 db2 } (...) } (...) } I need fully redundant sql config: 1. Freeradius should start with only one or both sql servers available 2. Freeradius should operate with only one or both sql servers available I can't start fr with only one sql server available. When I shut down db2 server, I see: (...) rlm_sql (db1): Opening additional connection (0) rlm_sql_mysql: Starting connect to MySQL server rlm_sql (db1): Opening additional connection (1) rlm_sql_mysql: Starting connect to MySQL server rlm_sql (db1): Opening additional connection (2) rlm_sql_mysql: Starting connect to MySQL server rlm_sql (db1): Opening additional connection (3) rlm_sql_mysql: Starting connect to MySQL server rlm_sql (db1): Opening additional connection (4) rlm_sql_mysql: Starting connect to MySQL server (...) rlm_sql (db2): Opening additional connection (0) rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Couldn't connect socket to MySQL server radius@172.16.20.14:radius rlm_sql_mysql: Mysql error 'Can't connect to MySQL server on '172.16.20.14' (111)' rlm_sql_mysql: Socket destructor called, closing socket rlm_sql (db2): Opening connection failed (0) rlm_sql (db2): Removing connection pool /etc/raddb/mods-enabled/sql[33]: Instantiation failed for module "db2" Of course I can start fr with both sql reached. Is it possible to start fr with the only one sql available? -- Regards, Paul

3 3

Freeradius a openldap password policy
by Angel L. Mateo 12 Mar '15

12 Mar '15

Hello, I am developing a freeradius3 server for eduroam authentication. My users are in a openldap directory where I have ppolicy to ensure that users change their password. When authenticating from radius, I can use ldap as an authenticate module, so it does a ldap bind as the user trying to connect and password policy is handle correctly. My problem is with EAP-PEAP using MSCHAP authentication. Is this scenario, I can't use ldap to authenticate, only as authorize module retrieving nt and lm passwords. So, is there any way to check that the password used is not expired? -- Angel L. Mateo Martínez Sección de Telemática Área de Tecnologías de la Información y las Comunicaciones Aplicadas (ATICA) http://www.um.es/atica Tfo: 868887590 Fax: 868888337

2 1

Time stamp is radius log.
by sai ram 11 Mar '15

11 Mar '15

Hi, I am using radius version 2.2.1. How to configure the radius server to log information with timestamp without running it in debug mode? I need to run the radius server in multi thread mode. Regards, Sairam

2 1

Access reject dropped by freeradius
by sai ram 11 Mar '15

11 Mar '15

Hi,

1 0

Access reject dropped by freeradius
by sai ram 11 Mar '15

11 Mar '15

Hi,

1 0

Failure to reconnect to ldaps server after idle_timeout
by Graham Leggett 11 Mar '15

11 Mar '15

Hi all, I have a freeradius v3.0.7 server running in a test setup that uses the rlm_ldap module to verify users and groups against an LDAPS server (ie LDAP with SSL enabled). With radius -X the server starts up, successfully connects to the LDAPS server, and successfully returns the correct results to requests. After some time has passed, requests start failing as follows: rlm_ldap (ldap): Closing connection (6): Hit idle_timeout, was idle for 601 seconds rlm_ldap (ldap): You probably need to lower "min" rlm_ldap (ldap): Closing connection (5): Hit idle_timeout, was idle for 601 seconds rlm_ldap (ldap): You probably need to lower "min" TLS: could not shutdown NSS - error -8053:NSS could not shutdown. Objects are still in use.. rlm_ldap (ldap): 0 of 0 connections in use. You may need to increase "spare" rlm_ldap (ldap): Opening additional connection (7), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldap://ldap.example.com:636 TLS: could not find the slot for the certificate '/etc/raddb/certs/ldap-ca.pem' - error -8127:The security card or token does not exist, needs to be initialized, or has been removed.. TLS: /etc/raddb/certs/ldap-ca.pem is not a valid CA certificate file - error -8127:The security card or token does not exist, needs to be initialized, or has been removed.. TLS: could not perform TLS system initialization. TLS: error: could not initialize moznss security context - error -8127:The security card or token does not exist, needs to be initialized, or has been removed. TLS: can't create ssl handle. rlm_ldap (ldap): Bind with cn=Radius,o=Example,c=XX to ldap://ldap.example.com:636 failed: Can't contact LDAP server TLS: could not shutdown NSS - error -8053:NSS could not shutdown. Objects are still in use.. rlm_ldap (ldap): Opening connection failed (7) (28) [ldap] = fail The server is then broken until restarted. It appears that after a normal idle timeout occurs and the last LDAP connection is shut down, an attempt is made to shut down NSS, which fails as follows: TLS: could not shutdown NSS - error -8053:NSS could not shutdown. Objects are still in use.. With NSS in a broken state, all subsequent reconnection attempts break. Is this a known issue in v3.0.7? Regards, Graham —

7 22

Problem with EAP-PEAP and freeradius3
by Angel L. Mateo 11 Mar '15

11 Mar '15

Hello, I'm trying to migrate my freeradius2 configuration for eduroam to freeradius3, but EAP-PEAP is not working. The configuration in my outer server is: server eduroam { authorize { preprocess suffix files_eduroam_outer eap } authenticate { eap } ... } In the inner tunnel I have: server eduroam-inner-tunnel { authorize { preprocess suffix eap files_eduroam_inner mschap Autz-Type LDAP-MSCHAP { ldap-email } pap } authenticate { Auth-Type PAP { pap } Auth-Type MS-CHAP { mschap } Auth-Type LDAP { ldap-email } } ... } And the authorize user's file configured in files_eduroam_inner is: DEFAULT Realm == um.es, Autz-Type = LDAP-MSCHAP User-Name = "%{User-Name}", X-Atica-Tipo = 'paspdi', Fall-Through = No In the ldap module, I have configured: update { control:Password-With-Header += 'userPassword' control:NT-Password = 'sambaNTPassword' ... } because sambaNTPassword is the attribute in my LDAP where I have the password in the windows format (I don't have it in cleartext) With this configuration, I'm getting the error (I have attached the complete log): (8) eap: Previous EAP request found for state 0x47fa1d5f47f20719, released from the list (8) eap: Peer sent method MSCHAPv2 (26) (8) eap: EAP MSCHAPv2 (26) (8) eap: Calling eap_mschapv2 to process EAP data (8) eap_mschapv2: # Executing group from file /etc/freeradius/sites-enabled/eduroam-inner-tunnel (8) eap_mschapv2: Auth-Type MS-CHAP { (8) mschap: WARNING: NT-Password has not been normalized by the 'pap' module (likely still in hex format). Authentication may fail (8) mschap: WARNING: No Cleartext-Password configured. Cannot create NT-Password (8) mschap: WARNING: No Cleartext-Password configured. Cannot create LM-Password (8) mschap: Creating challenge hash with username: angel.luis(a)um.es (8) mschap: Client is using MS-CHAPv2 (8) mschap: ERROR: FAILED: No NT/LM-Password. Cannot perform authentication (8) mschap: ERROR: MS-CHAP2-Response is incorrect (8) [mschap] = reject (8) } # Auth-Type MS-CHAP = reject With this same configuration, if I create a user directly in the authorize file (with its Cleartext-Password), it works, but with my users defined in ldap, don't. Any help? -- Angel L. Mateo Martínez Sección de Telemática Área de Tecnologías de la Información y las Comunicaciones Aplicadas (ATICA) http://www.um.es/atica Tfo: 868887590 Fax: 868888337

3 4

EAP-TLS CRL problem - a PKIX guru around?
by Stefan Winter 11 Mar '15

11 Mar '15

Hi, I've just had to revoke a certificate, and thus had to configure FreeRADIUS to enable CRL checks. Which went fine, except that while checking a valid cert, the CRL checks bark with something I don't understand. It's not entirely a FreeRADIUS question, but ... maybe enough clueful EAP-TLS deployers around maybe? What I see in debug mode is this: (5760) eap_tls: <<< TLS 1.0 Handshake [length 141a], Certificate (5760) eap_tls: TLS Verify adding attributes (5760) eap_tls: &request:TLS-Client-Cert-Serial := '010d' (5760) eap_tls: &request:TLS-Client-Cert-Expiration := '161028102449Z' (5760) eap_tls: &request:TLS-Client-Cert-Subject := '/C=LU/L=Luxembourg/O=Fondation RESTENA/OU=Secretariat/CN=certuser-2016-009@restena.lu/emailAddress=certuser-2016-009@restena .lu' (5760) eap_tls: &request:TLS-Client-Cert-Issuer := '/C=LU/L=Luxembourg/O=Fondation RESTENA/CN=RESTENA Staff Authentication CA/emailAddress=admin(a)restena.lu' (5760) eap_tls: &request:TLS-Client-Cert-Common-Name := 'certuser-2016-009(a)restena.lu' ERROR: (5760) eap_tls: SSL says error 44 : Different CRL scope (5760) eap_tls: >>> TLS 1.0 Alert [length 0002], fatal certificate_unknown ERROR: (5760) eap_tls: TLS Alert write:fatal:certificate unknown tls: TLS_accept: Error in SSLv3 read client certificate B ERROR: (5760) eap_tls: SSL says: error:140890B2:SSL routines:SSL3_GET_CLIENT_CERTIFICATE:no certificate returned SSL: SSL_read failed in a system call (-1), TLS session fails. So... the smoking gun line is "error 44 : Different CRL scope". Which means exactly nothing to me. The cert is issued by TLS-Client-Cert-Issuer := '/C=LU/L=Luxembourg/O=Fondation RESTENA/CN=RESTENA Staff Authentication CA/emailAddress=admin(a)restena.lu' and the CRL has: Certificate Revocation List (CRL): Version 2 (0x1) Signature Algorithm: sha512WithRSAEncryption Issuer: /C=LU/L=Luxembourg/O=Fondation RESTENA/CN=RESTENA Staff Authentication CA/emailAddress=admin(a)restena.lu Last Update: Mar 9 08:57:55 2015 GMT Next Update: Mar 6 08:57:55 2025 GMT CRL extensions: X509v3 Issuer Alternative Name: email:admin@restena.lu X509v3 Authority Key Identifier: keyid:4A:16:64:64:0B:AF:01:3D:5F:B4:9E:BB:B0:6D:FE:F2:E9:81:60:4D DirName:/C=LU/L=Luxembourg/O=Fondation RESTENA/CN=RESTENA Services CA/emailAddress=admin(a)restena.lu serial:01:00 X509v3 Issuing Distrubution Point: Full Name: URI:https://www.restena.lu/restena-staffauth.crl X509v3 CRL Number: 2 Revoked Certificates: Serial Number: 0103 Revocation Date: Mar 9 08:57:15 2015 GMT CRL entry extensions: X509v3 CRL Reason Code: Affiliation Changed So, the issuer of the CRL matches the issuer of the cert, and the CRL only revokes one of its serials, and it's not the incoming one. What the ... is openssl complaining about here? If anyone knows, please enlighten me... Greetings, Stefan Winter -- Stefan WINTER Ingenieur de Recherche Fondation RESTENA - Réseau Téléinformatique de l'Education Nationale et de la Recherche 6, rue Richard Coudenhove-Kalergi L-1359 Luxembourg Tel: +352 424409 1 Fax: +352 422473 PGP key updated to 4096 Bit RSA - I will encrypt all mails if the recipient's key is known to me http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xC0DE6A358A39DC66

2 4