- Freeradius-Users - lists.freeradius.org

Eap-Sim cannot initiate in Free Radius 3.0.6
by Ankit Prajapati 10 Mar '15

10 Mar '15

Hi , I am trying to run Eap-Sim in Free Radius v.3.0.6. I have configured RAND,KC's,SRES value in "raddb/mods-config/files/authorize" file , as per suggestion from some forum i have added eap sim trilpets values in straight line : IMSI EAP-Type :=SIM ,EAP-Sim-Rand1 :=<>,EAP-Sim-SRES1 :=<> ,Eap-Sim-KC1 :=<>, ........EAP-Sim-KC3 := <>. also configured eap-sim in eap configuration file. Now when i am trying to connect with the device get following errors: S *at Feb 28 14:27:38 2015 : Debug: (0) eap: Peer sent method Identity (1)Sat Feb 28 14:27:38 2015 : Debug: (0) eap: Calling eap_sim to process EAP dataSat Feb 28 14:27:38 2015 : ERROR: (0) eap_sim: ERROR: EAP-SIM-RAND1 not foundSat Feb 28 14:27:38 2015 : ERROR: (0) eap: ERROR: Failed starting EAP SIM (18) session. EAP sub-module failedSat Feb 28 14:27:38 2015 : Debug: (0) eap: Failed in EAP selectSat Feb 28 14:27:38 2015 : Debug: (0) modsingle[authenticate]: returned from eap (rlm_eap) for request 0* Also tried this solution also http://freeradius.1045715.n5.nabble.com/freeradius-3-cannot-initiate-eap-si… but not to able to resolve the issue ... Can some one help me ? -- -Thanks Ankit Prajapati

2 6

IP allocation problem
by Tevfik Ceydeliler 10 Mar '15

10 Mar '15

Hi Altough I use sqlippool adn lease time 6 hours, why one user get more than one IP? mysql> select * from radippool where username like 'kalaypazarlama3' ; +------+-----------------------+-----------------+--------------+-----------------+------------------+---------------------+-----------------+----------+ | id | pool_name | framedipaddress | nasipaddress | calledstationid | callingstationid | expiry_time | username | pool_key | +------+-----------------------+-----------------+--------------+-----------------+------------------+---------------------+-----------------+----------+ | 2227 | IP_TcellOtonomYBC-YBD | 172.30.72.187 | 172.30.80.1 | | 905333685343 | 2015-03-03 16:10:36 | kalaypazarlama3 | 115729 | | 2228 | IP_TcellOtonomYBC-YBD | 172.30.72.188 | 172.30.80.1 | | 905333685343 | 2015-03-03 14:30:31 | kalaypazarlama3 | 75047 | | 2229 | IP_TcellOtonomYBC-YBD | 172.30.72.189 | 172.30.80.1 | | 905333685343 | 2015-03-03 14:07:08 | kalaypazarlama3 | 81165 | | 2230 | IP_TcellOtonomYBC-YBD | 172.30.72.190 | 172.30.80.1 | | 905333685343 | 2015-03-03 14:00:51 | kalaypazarlama3 | 51588 | | 2231 | IP_TcellOtonomYBC-YBD | 172.30.72.191 | 172.30.80.1 | | 905333685343 | 2015-03-03 13:51:31 | kalaypazarlama3 | 97344 | | 2232 | IP_TcellOtonomYBC-YBD | 172.30.72.192 | 172.30.80.1 | | 905333685343 | 2015-03-03 14:06:28 | kalaypazarlama3 | 71919 | | 2233 | IP_TcellOtonomYBC-YBD | 172.30.72.193 | 172.30.80.1 | | 905333685343 | 2015-03-03 16:24:37 | kalaypazarlama3 | 96540 | +------+-----------------------+-----------------+--------------+-----------------+------------------+---------------------+-----------------+----------+ Any idea? or suggestion where I look? -- Bu elektronik postada bulunan tum fikir ve gorusler ve ekindeki dosyalar sadece adres sahip/sahiplerine ait olup, Yasar Toplulugu Sirketleri bu mesajin icerigi ile ilgili olarak hic bir hukuksal sorumlulugu kabul etmez. Eger gonderilmesi dusunulen kisi veya kurulus degilseniz, lutfen gonderen kisiyi derhal haberdar ediniz ve mesaji sisteminizden siliniz.The information contained in this e-mail and any files transmitted with it are intended solely for the use of the individual or entity to whom they are addressed and Yasar Group Companies do not accept legal responsibility for the contents. If you are not the intended recipient, please immediately notify the sender and delete it from your system.

3 6

HP Printers trying to do 802.1x but failing with timeouts
by jan hugo prins 10 Mar '15

10 Mar '15

Hello, I have a working 802.1x setup on the wired network of our office and everything is fine for Linux stations, Apple notebooks and the few windows notebooks we have. The Linux stations and the apple notebooks are doing EAP-TLS. And my idea was to have the printers we use do the same. But with the printers I get a lot of timeouts during authentication and to me it looks like the printer is really having a big issue handling all the certificate things etc. Does anyone here have experience in setting this up? Would it be an idea to get a newer printserver into the printers? I'm looking at the JetDirect 635 (J7961G). Jan Hugo Prins

3 8

3.0.7 radmin/status-server home server stats?
by Phil Mayers 09 Mar '15

09 Mar '15

I'm testing with 3.0.7 and something that was previously working, isn't. Specifically, "radmin -e 'show home_server list'" now always shows the servers as being in: x.x.x.x 1812 udp auth unknown 0 x.x.x.x 1813 udp acct unknown 0 ...and a status-server with: FreeRADIUS-Statistics-Type = 131 FreeRADIUS-Stats-Server-IP-Address = x.x.x.x FreeRADIUS-Stats-Server-Port = 1812 ...gives an empty reply. Have I missed something in the 3.0.x upgrade, is this done/tracked differently now?

3 3

Re: Freeradius 3.0.7 regex check in module files doesn't work
by Stabla, Daniel 09 Mar '15

09 Mar '15

I changed it to the "new" layout, but the problem still exists. Only if I change NAS-Identifier =~ "..." to NAS-Identifier == "..." I get a result. Kind regards. D. Stabla -----Ursprüngliche Nachricht----- Von: Freeradius-Users [mailto:freeradius-users-bounces+dstabla=materna.de@lists.freeradius.org] Im Auftrag von Phil Mayers Gesendet: Freitag, 6. März 2015 12:03 An: freeradius-users(a)lists.freeradius.org Betreff: Re: Freeradius 3.0.7 regex check in module files doesn't work Your "users" syntax is invalid. This: macNAS-Identifier =~ "...", Tunnel-Private-Group-ID := "100" ...should be: macNAS-Identifier =~ "..." Tunnel-Private-Group-ID := "100" Comparisons, and "set" for control items, go on the first line of a "users" file entry. Reply items go on 2nd and subsequent lines. It might be that this worked by accident in 3.0.4. It's also best IMO from a readability PoV to leave a blank line between users file entries. I would encourage you to convert this config to "unlang" which is less "magical" than users-file syntax. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

2 1

IP Poll For Exiperd User
by sirk98 qwerty89 08 Mar '15

08 Mar '15

Hi, I'm really new with freeradius, I've a little pppoe network and I authenticate users with free radius. Is it possible to redirect an expired user to a specific url? Or assign to him a specific IP address? Thanks in advance for any reply .

1 0

CUI not working with PEAP
by Krause, Kilian 07 Mar '15

07 Mar '15

Hi, using Debian wheezy-backports FreeRADIUS 2.2.5 version with default config and just adding a local user gives me a valid CUI (adding CUI just in authorize for sites-enabled/default and post-auth/inner-tunnel using default policy.conf) with a correct reply in the outer tunnel. Changing the request to PEAP however doesn't yield a CUI at all. Debug is as follows: freeradius: FreeRADIUS Version 2.2.5, for host x86_64-pc-linux-gnu, built on Oct 28 2014 at 16:27:11 Copyright (C) 1999-2013 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License. For more information about these matters, see the file named COPYRIGHT. Starting - reading configuration files ... including configuration file /etc/freeradius/radiusd.conf including configuration file /etc/freeradius/proxy.conf including configuration file /etc/freeradius/clients.conf including files in directory /etc/freeradius/modules/ including configuration file /etc/freeradius/modules/sqlcounter_expire_on_login including configuration file /etc/freeradius/modules/smbpasswd including configuration file /etc/freeradius/modules/files including configuration file /etc/freeradius/modules/dynamic_clients including configuration file /etc/freeradius/modules/linelog including configuration file /etc/freeradius/modules/expiration including configuration file /etc/freeradius/modules/krb5 including configuration file /etc/freeradius/modules/attr_filter including configuration file /etc/freeradius/modules/radutmp including configuration file /etc/freeradius/modules/opendirectory including configuration file /etc/freeradius/modules/sradutmp including configuration file /etc/freeradius/modules/realm including configuration file /etc/freeradius/modules/detail.example.com including configuration file /etc/freeradius/modules/otp including configuration file /etc/freeradius/modules/echo including configuration file /etc/freeradius/modules/cui including configuration file /etc/freeradius/modules/preprocess including configuration file /etc/freeradius/modules/expr including configuration file /etc/freeradius/modules/ippool including configuration file /etc/freeradius/modules/sql_log including configuration file /etc/freeradius/modules/counter including configuration file /etc/freeradius/modules/mac2vlan including configuration file /etc/freeradius/modules/exec including configuration file /etc/freeradius/modules/pam including configuration file /etc/freeradius/modules/perl including configuration file /etc/freeradius/modules/inner-eap including configuration file /etc/freeradius/modules/ldap including configuration file /etc/freeradius/modules/pap including configuration file /etc/freeradius/modules/attr_rewrite including configuration file /etc/freeradius/modules/unix including configuration file /etc/freeradius/modules/mschap including configuration file /etc/freeradius/modules/passwd including configuration file /etc/freeradius/modules/radrelay including configuration file /etc/freeradius/modules/wimax including configuration file /etc/freeradius/modules/checkval including configuration file /etc/freeradius/modules/rediswho including configuration file /etc/freeradius/modules/dhcp_sqlippool including configuration file /etc/freeradius/modules/logintime including configuration file /etc/freeradius/modules/mac2ip including configuration file /etc/freeradius/modules/cache including configuration file /etc/freeradius/modules/ntlm_auth including configuration file /etc/freeradius/modules/always including configuration file /etc/freeradius/modules/chap including configuration file /etc/freeradius/modules/soh including configuration file /etc/freeradius/modules/smsotp including configuration file /etc/freeradius/modules/detail.log including configuration file /etc/freeradius/modules/digest including configuration file /etc/freeradius/modules/policy including configuration file /etc/freeradius/modules/detail including configuration file /etc/freeradius/modules/redis including configuration file /etc/freeradius/modules/etc_group including configuration file /etc/freeradius/modules/replicate including configuration file /etc/freeradius/modules/acct_unique including configuration file /etc/freeradius/eap.conf including configuration file /etc/freeradius/policy.conf including files in directory /etc/freeradius/sites-enabled/ including configuration file /etc/freeradius/sites-enabled/default including configuration file /etc/freeradius/sites-enabled/inner-tunnel including dictionary file /etc/freeradius/dictionary main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes allow_vulnerable_openssl = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 require_message_authenticator = yes zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } client 129.69.5.130 { require_message_authenticator = no secret = ... nastype = "other" } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating module "exec" from file /etc/freeradius/modules/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } Module: Linked to module rlm_expr Module: Instantiating module "expr" from file /etc/freeradius/modules/expr Module: Linked to module rlm_expiration Module: Instantiating module "expiration" from file /etc/freeradius/modules/expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating module "logintime" from file /etc/freeradius/modules/logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server { # from file £Ýç? modules { Module: Creating Auth-Type = digest Module: Creating Post-Auth-Type = REJECT Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating module "pap" from file /etc/freeradius/modules/pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating module "chap" from file /etc/freeradius/modules/chap Module: Linked to module rlm_mschap Module: Instantiating module "mschap" from file /etc/freeradius/modules/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no allow_retry = yes } Module: Linked to module rlm_digest Module: Instantiating module "digest" from file /etc/freeradius/modules/digest Module: Linked to module rlm_unix Module: Instantiating module "unix" from file /etc/freeradius/modules/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating module "eap" from file /etc/freeradius/eap.conf eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 1024 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 CA_path = "/etc/freeradius/certs" pem_file_type = yes private_key_file = "/etc/ssl/private/test-auth1.rus.uni-stuttgart.de.key" certificate_file = "/etc/ssl/certs/test-auth1.rus.uni-stuttgart.de.crt" CA_file = "/etc/freeradius/certs/ca.pem" private_key_password = ... dh_file = "/etc/freeradius/certs/dh" random_file = "/dev/urandom" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/etc/freeradius/certs/bootstrap" ecdh_curve = "prime256v1" cache { enable = no lifetime = 24 max_entries = 255 } verify { } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating module "preprocess" from file /etc/freeradius/modules/preprocess preprocess { huntgroups = "/etc/freeradius/huntgroups" hints = "/etc/freeradius/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } reading pairlist file /etc/freeradius/huntgroups reading pairlist file /etc/freeradius/hints Module: Loading virtual module cui_authorize Module: Linked to module rlm_realm Module: Instantiating module "suffix" from file /etc/freeradius/modules/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating module "files" from file /etc/freeradius/modules/files files { usersfile = "/etc/freeradius/users" acctusersfile = "/etc/freeradius/acct_users" preproxy_usersfile = "/etc/freeradius/preproxy_users" compat = "no" } reading pairlist file /etc/freeradius/users reading pairlist file /etc/freeradius/acct_users reading pairlist file /etc/freeradius/preproxy_users Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating module "acct_unique" from file /etc/freeradius/modules/acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, NAS-Identifier, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating module "detail" from file /etc/freeradius/modules/detail detail { detailfile = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Linked to module rlm_attr_filter Module: Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/modules/attr_filter attr_filter attr_filter.accounting_response { attrsfile = "/etc/freeradius/attrs.accounting_response" key = "%{User-Name}" relaxed = no } reading pairlist file /etc/freeradius/attrs.accounting_response Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating module "radutmp" from file /etc/freeradius/modules/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Instantiating module "attr_filter.access_reject" from file /etc/freeradius/modules/attr_filter attr_filter attr_filter.access_reject { attrsfile = "/etc/freeradius/attrs.access_reject" key = "%{User-Name}" relaxed = no } reading pairlist file /etc/freeradius/attrs.access_reject } # modules } # server server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Loading virtual module cui_postauth } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } ... adding new socket proxy address * port 46437 Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on authentication address 127.0.0.1 port 18120 as server inner-tunnel Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 129.69.5.130 port 50355, id=0, length=116 User-Name = "anonymous" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "70-6F-6C-69-73-68" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "check_radius" EAP-Message = 0x0200000e01616e6f6e796d6f7573 Message-Authenticator = 0x2e831f87883573e120673176e349c655 # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++policy cui_authorize { +++update request { +++} # update request = noop ++} # policy cui_authorize = noop ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] No '@' in User-Name = "anonymous", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] = noop [eap] EAP packet type response id 0 length 14 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] = updated ++[files] = noop ++[expiration] = noop ++[logintime] = noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] = noop +} # group authorize = updated Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +group authenticate { [eap] EAP Identity [eap] processing type md5 rlm_eap_md5: Issuing Challenge ++[eap] = handled +} # group authenticate = handled Sending Access-Challenge of id 0 to 129.69.5.130 port 50355 EAP-Message = 0x010100160410f78837ff9e55c8ab98d9e42bab671589 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x0f2d19e30f2c1d9b347c7ccf2b2608d1 Finished request 0. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 129.69.5.130 port 50355, id=1, length=126 User-Name = "anonymous" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "70-6F-6C-69-73-68" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "check_radius" EAP-Message = 0x020100060319 State = 0x0f2d19e30f2c1d9b347c7ccf2b2608d1 Message-Authenticator = 0x38e3eb7dcafc3d7d6a39dc6fd8ffe5ea # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++policy cui_authorize { +++update request { +++} # update request = noop ++} # policy cui_authorize = noop ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] No '@' in User-Name = "anonymous", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] = noop [eap] EAP packet type response id 1 length 6 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] = updated ++[files] = noop ++[expiration] = noop ++[logintime] = noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] = noop +} # group authorize = updated Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +group authenticate { [eap] Request found, released from the list [eap] EAP NAK [eap] EAP-NAK asked for EAP-Type/peap [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] = handled +} # group authenticate = handled Sending Access-Challenge of id 1 to 129.69.5.130 port 50355 EAP-Message = 0x010200061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x0f2d19e30e2f009b347c7ccf2b2608d1 Finished request 1. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 129.69.5.130 port 50355, id=2, length=343 User-Name = "anonymous" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "70-6F-6C-69-73-68" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "check_radius" EAP-Message = 0x020200df1980000000d516030100d0010000cc0301202d5c0a4582c1acc323588a1b7ae0c6535cb58ef150ce34b83eeec1ee5a6fb200005ac014c00a0039003800880087c00fc00500350084c012c00800160013c00dc003000ac013c00900330032009a009900450044c00ec004002f00960041c011c007c00cc002000500040015001200090014001100080006000300ff01000049000b000403000102000a00340032000e000d0019000b000c00180009000a00160017000800060007001400150004000500120013000100020003000f0010001100230000000f000101 State = 0x0f2d19e30e2f009b347c7ccf2b2608d1 Message-Authenticator = 0x8b1028261e559aa78f0284321166af04 # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++policy cui_authorize { +++update request { +++} # update request = noop ++} # policy cui_authorize = noop ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] No '@' in User-Name = "anonymous", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] = noop [eap] EAP packet type response id 2 length 223 [eap] Continuing tunnel setup. ++[eap] = ok +} # group authorize = ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +group authenticate { [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 213 [peap] Length Included [peap] eaptls_verify returned 11 [peap] (other): before/accept initialization [peap] TLS_accept: before/accept initialization [peap] <<< TLS 1.0 Handshake [length 00d0], ClientHello [peap] TLS_accept: SSLv3 read client hello A [peap] >>> TLS 1.0 Handshake [length 003e], ServerHello [peap] TLS_accept: SSLv3 write server hello A [peap] >>> TLS 1.0 Handshake [length 1523], Certificate [peap] TLS_accept: SSLv3 write certificate A [peap] >>> TLS 1.0 Handshake [length 024b], ServerKeyExchange [peap] TLS_accept: SSLv3 write key exchange A [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [peap] TLS_accept: SSLv3 write server done A [peap] TLS_accept: SSLv3 flush data [peap] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] = handled +} # group authenticate = handled Sending Access-Challenge of id 2 to 129.69.5.130 port 50355 EAP-Message = 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 EAP-Message = 0x0901161763612d67303140756e692d7374757474676172742e6465301e170d3135303131363035313431395a170d3139303730393233353930305a308197310b3009060355040613024445311b301906035504081312426164656e2d577565727474656d626572673112301006035504071309537475747467617274311f301d060355040a1316556e6976657273697461657420537475747467617274310c300a060355040b13034e4b53312830260603550403131f746573742d61757468312e7275732e756e692d7374757474676172742e646530820222300d06092a864886f70d01010105000382020f003082020a0282020100eddb28f383b67a EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x03010001a382026630820262 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x0f2d19e30d2e009b347c7ccf2b2608d1 Finished request 2. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 129.69.5.130 port 50355, id=3, length=126 User-Name = "anonymous" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "70-6F-6C-69-73-68" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "check_radius" EAP-Message = 0x020300061900 State = 0x0f2d19e30d2e009b347c7ccf2b2608d1 Message-Authenticator = 0xde0a02b59599394e6180743d793f8acb # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++policy cui_authorize { +++update request { +++} # update request = noop ++} # policy cui_authorize = noop ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] No '@' in User-Name = "anonymous", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] = noop [eap] EAP packet type response id 3 length 6 [eap] Continuing tunnel setup. ++[eap] = ok +} # group authorize = ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +group authenticate { [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] = handled +} # group authenticate = handled Sending Access-Challenge of id 3 to 129.69.5.130 port 50355 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x476c6f62616c202d Message-Authenticator = 0x00000000000000000000000000000000 State = 0x0f2d19e30c29009b347c7ccf2b2608d1 Finished request 3. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 129.69.5.130 port 50355, id=4, length=126 User-Name = "anonymous" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "70-6F-6C-69-73-68" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "check_radius" EAP-Message = 0x020400061900 State = 0x0f2d19e30c29009b347c7ccf2b2608d1 Message-Authenticator = 0x3fed3380bdf089961004f7686fd7614b # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++policy cui_authorize { +++update request { +++} # update request = noop ++} # policy cui_authorize = noop ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] No '@' in User-Name = "anonymous", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] = noop [eap] EAP packet type response id 4 length 6 [eap] Continuing tunnel setup. ++[eap] = ok +} # group authorize = ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +group authenticate { [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] = handled +} # group authenticate = handled Sending Access-Challenge of id 4 to 129.69.5.130 port 50355 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x864886f70d01010b Message-Authenticator = 0x00000000000000000000000000000000 State = 0x0f2d19e30b28009b347c7ccf2b2608d1 Finished request 4. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 129.69.5.130 port 50355, id=5, length=126 User-Name = "anonymous" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "70-6F-6C-69-73-68" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "check_radius" EAP-Message = 0x020500061900 State = 0x0f2d19e30b28009b347c7ccf2b2608d1 Message-Authenticator = 0x59f590ded9d0e7ef154b49fd0304986e # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++policy cui_authorize { +++update request { +++} # update request = noop ++} # policy cui_authorize = noop ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] No '@' in User-Name = "anonymous", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] = noop [eap] EAP packet type response id 5 length 6 [eap] Continuing tunnel setup. ++[eap] = ok +} # group authorize = ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +group authenticate { [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] = handled +} # group authenticate = handled Sending Access-Challenge of id 5 to 129.69.5.130 port 50355 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x822c010104030130 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x0f2d19e30a2b009b347c7ccf2b2608d1 Finished request 5. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 129.69.5.130 port 50355, id=6, length=126 User-Name = "anonymous" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "70-6F-6C-69-73-68" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "check_radius" EAP-Message = 0x020600061900 State = 0x0f2d19e30a2b009b347c7ccf2b2608d1 Message-Authenticator = 0x1a54ac252d668f7d538e7b6555b61a70 # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++policy cui_authorize { +++update request { +++} # update request = noop ++} # policy cui_authorize = noop ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] No '@' in User-Name = "anonymous", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] = noop [eap] EAP packet type response id 6 length 6 [eap] Continuing tunnel setup. ++[eap] = ok +} # group authorize = ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +group authenticate { [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] = handled +} # group authenticate = handled Sending Access-Challenge of id 6 to 129.69.5.130 port 50355 EAP-Message = 0x010703fc19400f060d2b0601040181ad21822c010104300d060b2b0601040181ad21822c1e303e0603551d1f043730353033a031a02f862d687474703a2f2f706b69303333362e74656c657365632e64652f726c2f44545f524f4f545f43415f322e63726c307806082b06010505070101046c306a302c06082b060105050730018620687474703a2f2f6f637370303333362e74656c657365632e64652f6f63737072303a06082b06010505073002862e687474703a2f2f706b69303333362e74656c657365632e64652f6372742f44545f524f4f545f43415f322e636572300d06092a864886f70d01010b05000382010100632028fd9c218672be39 EAP-Message = 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 EAP-Message = 0x30820287a003020102020126300d06092a864886f70d01010505003071310b3009060355040613024445311c301a060355040a131344657574736368652054656c656b6f6d204147311f301d060355040b1316542d54656c655365632054727573742043656e746572312330210603550403131a44657574736368652054656c656b6f6d20526f6f742043412032301e170d3939303730393132313130305a170d3139303730393233353930305a3071310b3009060355040613024445311c301a060355040a131344657574736368652054656c656b6f6d204147311f301d060355040b1316542d54656c655365632054727573742043656e74657231 EAP-Message = 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 EAP-Message = 0xa3868a49ee53058f Message-Authenticator = 0x00000000000000000000000000000000 State = 0x0f2d19e3092a009b347c7ccf2b2608d1 Finished request 6. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 129.69.5.130 port 50355, id=7, length=126 User-Name = "anonymous" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "70-6F-6C-69-73-68" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "check_radius" EAP-Message = 0x020700061900 State = 0x0f2d19e3092a009b347c7ccf2b2608d1 Message-Authenticator = 0xe411b216f44884216f98ff81933162c1 # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++policy cui_authorize { +++update request { +++} # update request = noop ++} # policy cui_authorize = noop ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] No '@' in User-Name = "anonymous", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] = noop [eap] EAP packet type response id 7 length 6 [eap] Continuing tunnel setup. ++[eap] = ok +} # group authorize = ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +group authenticate { [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] = handled +} # group authenticate = handled Sending Access-Challenge of id 7 to 129.69.5.130 port 50355 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x0f2d19e30825009b347c7ccf2b2608d1 Finished request 7. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 129.69.5.130 port 50355, id=8, length=264 User-Name = "anonymous" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "70-6F-6C-69-73-68" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "check_radius" EAP-Message = 0x020800901980000000861603010046100000424104a2cd2a9f4a021cb6e92f80290a54c6ecad35b4c5b5c6772758337ad984bcd00aef2daadf43bfb86cd065ba1b02174c0f0c56143aaeed365657919f367380706e14030100010116030100308694539e26113878b883f895257741161738149e6e369e48581ada4a8d7a92ebc1ca2a7ed829aa2cfb90c8148aa73c48 State = 0x0f2d19e30825009b347c7ccf2b2608d1 Message-Authenticator = 0x952f4074b413c1eb75ef0feab136135f # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++policy cui_authorize { +++update request { +++} # update request = noop ++} # policy cui_authorize = noop ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] No '@' in User-Name = "anonymous", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] = noop [eap] EAP packet type response id 8 length 144 [eap] Continuing tunnel setup. ++[eap] = ok +} # group authorize = ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +group authenticate { [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 134 [peap] Length Included [peap] eaptls_verify returned 11 [peap] <<< TLS 1.0 Handshake [length 0046], ClientKeyExchange [peap] TLS_accept: SSLv3 read client key exchange A [peap] <<< TLS 1.0 ChangeCipherSpec [length 0001] [peap] <<< TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 read finished A [peap] >>> TLS 1.0 ChangeCipherSpec [length 0001] [peap] TLS_accept: SSLv3 write change cipher spec A [peap] >>> TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 write finished A [peap] TLS_accept: SSLv3 flush data [peap] (other): SSL negotiation finished successfully SSL Connection Established [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] = handled +} # group authenticate = handled Sending Access-Challenge of id 8 to 129.69.5.130 port 50355 EAP-Message = 0x010900411900140301000101160301003034af026b166e872b5fe303e7203e2c348ace34dc6cbbe50264f1745e625011fc26954934a51195d432680193f003d7a9 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x0f2d19e30724009b347c7ccf2b2608d1 Finished request 8. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 129.69.5.130 port 50355, id=9, length=126 User-Name = "anonymous" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "70-6F-6C-69-73-68" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "check_radius" EAP-Message = 0x020900061900 State = 0x0f2d19e30724009b347c7ccf2b2608d1 Message-Authenticator = 0x1b9f0c4b7d818951c0ed5941913a1a0a # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++policy cui_authorize { +++update request { +++} # update request = noop ++} # policy cui_authorize = noop ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] No '@' in User-Name = "anonymous", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] = noop [eap] EAP packet type response id 9 length 6 [eap] Continuing tunnel setup. ++[eap] = ok +} # group authorize = ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +group authenticate { [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake is finished [peap] eaptls_verify returned 3 [peap] eaptls_process returned 3 [peap] EAPTLS_SUCCESS [peap] Session established. Decoding tunneled attributes. [peap] Peap state TUNNEL ESTABLISHED ++[eap] = handled +} # group authenticate = handled Sending Access-Challenge of id 9 to 129.69.5.130 port 50355 EAP-Message = 0x010a002b190017030100209af10d28c429a73c78e3be5c68b925a2d74aa39f8b3a2b44b2336b0da1a4d62c Message-Authenticator = 0x00000000000000000000000000000000 State = 0x0f2d19e30627009b347c7ccf2b2608d1 Finished request 9. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 129.69.5.130 port 50355, id=10, length=200 User-Name = "anonymous" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "70-6F-6C-69-73-68" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "check_radius" EAP-Message = 0x020a00501900170301002065f6bcc0a100bbce627903cca630123cb8579957b0977235caefd7f0f49d5c941703010020fdc7d7495f3813c254736b434aa291bd50ef7fab33de7797f27636db651f6169 State = 0x0f2d19e30627009b347c7ccf2b2608d1 Message-Authenticator = 0x39e21bdfb0b9d7c8a1853fed184f3998 # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++policy cui_authorize { +++update request { +++} # update request = noop ++} # policy cui_authorize = noop ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] No '@' in User-Name = "anonymous", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] = noop [eap] EAP packet type response id 10 length 80 [eap] Continuing tunnel setup. ++[eap] = ok +} # group authorize = ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +group authenticate { [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state WAITING FOR INNER IDENTITY [peap] Identity - test [peap] Got inner identity 'test' [peap] Setting default EAP type for tunneled EAP session. [peap] Got tunneled request EAP-Message = 0x020a00090174657374 server { [peap] Setting User-Name to test Sending tunneled request EAP-Message = 0x020a00090174657374 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "test" server inner-tunnel { # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel +group authorize { ++[chap] = noop ++update control { ++} # update control = noop ++[mschap] = noop [suffix] No '@' in User-Name = "test", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] = noop ++update control { ++} # update control = noop [eap] EAP packet type response id 10 length 9 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] = updated [files] users: Matched entry test at line 61 ++[files] = ok ++[expiration] = noop ++[logintime] = noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] = noop +} # group authorize = updated Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel +group authenticate { [eap] EAP Identity [eap] processing type mschapv2 rlm_eap_mschapv2: Issuing Challenge ++[eap] = handled +} # group authenticate = handled } # server inner-tunnel [peap] Got tunneled reply code 11 EAP-Message = 0x010b001e1a010b001910fa9328be424d72285b6ac13a224bf4c374657374 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x73ef44ad73e45ee6b34d60cb680fe623 [peap] Got tunneled reply RADIUS code 11 EAP-Message = 0x010b001e1a010b001910fa9328be424d72285b6ac13a224bf4c374657374 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x73ef44ad73e45ee6b34d60cb680fe623 [peap] Got tunneled Access-Challenge ++[eap] = handled +} # group authenticate = handled Sending Access-Challenge of id 10 to 129.69.5.130 port 50355 EAP-Message = 0x010b003b190017030100308541d28e870b121d89635844c9c96a06e5866f4b58c3fd77808763fdee4e392c04b66f7b43bdfeec46c11ae41d04bef1 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x0f2d19e30526009b347c7ccf2b2608d1 Finished request 10. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 129.69.5.130 port 50355, id=11, length=248 User-Name = "anonymous" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "70-6F-6C-69-73-68" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "check_radius" EAP-Message = 0x020b0080190017030100205b05db516f17b12bcb8ddebd93af9d53567c610c34b1e0b54f585c87a357eb911703010050f298cc24dc0994f57883b2911ca56bef4f188cc63eb0cfa9a4baacb2699c6bb7ef4e7ef12b803c0b29dd4747e448d9c9db397bdbb75430ba7ad5cc6700fe9dc7da89a49750314b6396fbf3ecf9cd1a88 State = 0x0f2d19e30526009b347c7ccf2b2608d1 Message-Authenticator = 0xd8cdd5cd1dda8de7df9eb7cb9c5d139a # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++policy cui_authorize { +++update request { +++} # update request = noop ++} # policy cui_authorize = noop ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] No '@' in User-Name = "anonymous", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] = noop [eap] EAP packet type response id 11 length 128 [eap] Continuing tunnel setup. ++[eap] = ok +} # group authorize = ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +group authenticate { [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state phase2 [peap] EAP type mschapv2 [peap] Got tunneled request EAP-Message = 0x020b003f1a020b003a31e9ffdcee4bbc78bc70f699c7b7d18a6a0000000000000000e1bfee3110af879278f74e833f924d04bbcf3e2b6abfaefa0074657374 server { [peap] Setting User-Name to test Sending tunneled request EAP-Message = 0x020b003f1a020b003a31e9ffdcee4bbc78bc70f699c7b7d18a6a0000000000000000e1bfee3110af879278f74e833f924d04bbcf3e2b6abfaefa0074657374 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "test" State = 0x73ef44ad73e45ee6b34d60cb680fe623 server inner-tunnel { # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel +group authorize { ++[chap] = noop ++update control { ++} # update control = noop ++[mschap] = noop [suffix] No '@' in User-Name = "test", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] = noop ++update control { ++} # update control = noop [eap] EAP packet type response id 11 length 63 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] = updated [files] users: Matched entry test at line 61 ++[files] = ok ++[expiration] = noop ++[logintime] = noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] = noop +} # group authorize = updated Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel +group authenticate { [eap] Request found, released from the list [eap] EAP/mschapv2 [eap] processing type mschapv2 [mschapv2] # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel [mschapv2] +group MS-CHAP { [mschap] Creating challenge hash with username: test [mschap] Client is using MS-CHAPv2 for test, we need NT-Password [mschap] adding MS-CHAPv2 MPPE keys ++[mschap] = ok +} # group MS-CHAP = ok MSCHAP Success ++[eap] = handled +} # group authenticate = handled } # server inner-tunnel [peap] Got tunneled reply code 11 EAP-Message = 0x010c00331a030b002e533d30443045354133374237353435393138303937373141463136313142353741453941304136453343 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x73ef44ad72e35ee6b34d60cb680fe623 [peap] Got tunneled reply RADIUS code 11 EAP-Message = 0x010c00331a030b002e533d30443045354133374237353435393138303937373141463136313142353741453941304136453343 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x73ef44ad72e35ee6b34d60cb680fe623 [peap] Got tunneled Access-Challenge ++[eap] = handled +} # group authenticate = handled Sending Access-Challenge of id 11 to 129.69.5.130 port 50355 EAP-Message = 0x010c005b19001703010050b7ef8497271c47f35e588dcf625984fdee9a02890622c77d75be45f645f1d71195d8d689cdbcf85ac87b088a878064fcd20f47c2d35fee47f3102eb2ed82939bf67ac21ef90f9a6c813b237688f84e3a Message-Authenticator = 0x00000000000000000000000000000000 State = 0x0f2d19e30421009b347c7ccf2b2608d1 Finished request 11. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 129.69.5.130 port 50355, id=12, length=200 User-Name = "anonymous" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "70-6F-6C-69-73-68" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "check_radius" EAP-Message = 0x020c005019001703010020ca23be428a79d9e7be29a585406e4c0f603ea3a45ec2d4c31a650aafbd6b351b1703010020eed02b9ddbc4581e2714ba17dde909e852b162ecde7744834de3fdd29b38c2ac State = 0x0f2d19e30421009b347c7ccf2b2608d1 Message-Authenticator = 0x1c260dc2248591419a9a2ad1c69a3ef7 # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++policy cui_authorize { +++update request { +++} # update request = noop ++} # policy cui_authorize = noop ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] No '@' in User-Name = "anonymous", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] = noop [eap] EAP packet type response id 12 length 80 [eap] Continuing tunnel setup. ++[eap] = ok +} # group authorize = ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +group authenticate { [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state phase2 [peap] EAP type mschapv2 [peap] Got tunneled request EAP-Message = 0x020c00061a03 server { [peap] Setting User-Name to test Sending tunneled request EAP-Message = 0x020c00061a03 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "test" State = 0x73ef44ad72e35ee6b34d60cb680fe623 server inner-tunnel { # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel +group authorize { ++[chap] = noop ++update control { ++} # update control = noop ++[mschap] = noop [suffix] No '@' in User-Name = "test", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] = noop ++update control { ++} # update control = noop [eap] EAP packet type response id 12 length 6 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] = updated [files] users: Matched entry test at line 61 ++[files] = ok ++[expiration] = noop ++[logintime] = noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] = noop +} # group authorize = updated Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel +group authenticate { [eap] Request found, released from the list [eap] EAP/mschapv2 [eap] processing type mschapv2 [eap] Freeing handler ++[eap] = ok +} # group authenticate = ok # Executing section post-auth from file /etc/freeradius/sites-enabled/inner-tunnel +group post-auth { ++policy cui_postauth { +++? if (FreeRadius-Proxied-To == 127.0.0.1) ? Evaluating (FreeRadius-Proxied-To == 127.0.0.1) -> TRUE +++? if (FreeRadius-Proxied-To == 127.0.0.1) -> TRUE +++if (FreeRadius-Proxied-To == 127.0.0.1) { ++++? if (outer.request:Chargeable-User-Identity) ? Evaluating (outer.request:Chargeable-User-Identity) -> TRUE ++++? if (outer.request:Chargeable-User-Identity) -> TRUE ++++if (outer.request:Chargeable-User-Identity) { +++++update outer.reply { expand: cui_hash_key -> cui_hash_key expand: %{config:cui_hash_key}%{User-Name} -> test...test expand: %{md5:%{config:cui_hash_key}%{User-Name}} -> af9ff6128f1d96175837a8c519a96afb +++++} # update outer.reply = noop ++++} # if (outer.request:Chargeable-User-Identity) = noop +++} # if (FreeRadius-Proxied-To == 127.0.0.1) = noop +++ ... skipping else for request 12: Preceding "if" was taken ++} # policy cui_postauth = noop +} # group post-auth = noop } # server inner-tunnel [peap] Got tunneled reply code 2 MS-MPPE-Encryption-Policy = 0x00000001 MS-MPPE-Encryption-Types = 0x00000006 MS-MPPE-Send-Key = 0xe4dc1a26c353c090f67b6bf6bd188dc7 MS-MPPE-Recv-Key = 0x272ed321f8edd9f5d647b617dfd8331b EAP-Message = 0x030c0004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = "test" [peap] Got tunneled reply RADIUS code 2 MS-MPPE-Encryption-Policy = 0x00000001 MS-MPPE-Encryption-Types = 0x00000006 MS-MPPE-Send-Key = 0xe4dc1a26c353c090f67b6bf6bd188dc7 MS-MPPE-Recv-Key = 0x272ed321f8edd9f5d647b617dfd8331b EAP-Message = 0x030c0004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = "test" [peap] Tunneled authentication was successful. [peap] SUCCESS ++[eap] = handled +} # group authenticate = handled Sending Access-Challenge of id 12 to 129.69.5.130 port 50355 Chargeable-User-Identity = "af9ff6128f1d96175837a8c519a96afb" EAP-Message = 0x010d002b190017030100204cba8110b0ea82dc9972b79b9d38cb2222ba46e3b92aa013d7128d8edaf550f0 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x0f2d19e30320009b347c7ccf2b2608d1 Finished request 12. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 129.69.5.130 port 50355, id=13, length=200 User-Name = "anonymous" NAS-IP-Address = 127.0.0.1 Calling-Station-Id = "70-6F-6C-69-73-68" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "check_radius" EAP-Message = 0x020d005019001703010020d1d31246b21acf81673a91a3e1cd7faef80cbf395c4f10008ae4581aca6068f017030100209cc273c58db0b0c8c45243c2012b6a44b3a9bd0d9c914bd8b63197736b036226 State = 0x0f2d19e30320009b347c7ccf2b2608d1 Message-Authenticator = 0xf9bf51fcbcf37c785131d8d7665515fd # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++policy cui_authorize { +++update request { +++} # update request = noop ++} # policy cui_authorize = noop ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] No '@' in User-Name = "anonymous", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] = noop [eap] EAP packet type response id 13 length 80 [eap] Continuing tunnel setup. ++[eap] = ok +} # group authorize = ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +group authenticate { [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state send tlv success [peap] Received EAP-TLV response. [peap] Success [eap] Freeing handler ++[eap] = ok +} # group authenticate = ok # Executing section post-auth from file /etc/freeradius/sites-enabled/default +group post-auth { ++[exec] = noop +} # group post-auth = noop Sending Access-Accept of id 13 to 129.69.5.130 port 50355 MS-MPPE-Recv-Key = 0xe6f5c1dbed02dc3b0209016ac4e3a47c134397edcb19159e6d14a9d348265773 MS-MPPE-Send-Key = 0x4378e43173b72fc85dafb172e56307ffc75f73459a1b36bca059a21274cd0266 EAP-Message = 0x030d0004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = "anonymous" Finished request 13. Going to the next request Waking up in 4.9 seconds. Do you reckon that with PEAP we'd need use_tunneled_reply? Off-topic: why does the debug tell me: "server { # from file £Ýç?" with such a weird file name? TIA! Best, Kilian

1 1

authorize_group_check_query must be configured as group_membership_query is configured
by Phil Mayers 06 Mar '15

06 Mar '15

Looks like this came in between 3.0.3 and 3.0.7. Not sure what the rationale is here - I'm forced to define a query for radgroupcheck even if I'm not using it, and only want SQL-Group processing?

2 1

ipaddr, ipv4addr ipv6addr
by Arran Cudbard-Bell 06 Mar '15

06 Mar '15

The behaviour of the ipaddr config item has changed slightly for 3.0.4. If the ipaddr value contains ':' or '[' or ']', it will be treated as an IPv6 address. If it fails to parse as an IPv6 address the server will refuse to start. If the ipaddr value does not contain any ipv6 chars the server will first check to see if it looks like an ipv4 address. If it does, the server will parse it, if it doesn't and DNS resolution is enabled, it will instead attempt to resolve it. If DNS resolution is not enabled the server will refuse to start. If a matching A record is available it will be used, else if a AAAA record is available else the server will refuse to start. If instead of the ipaddr config item the ipv4addr config item is used the server will check if it looks like an IPv4 address. If it does, the server will parse it, if it doesn't and DNS resolution is enabled, it will instead attempt to resolve it. If DNS resolution is not enabled the server will refuse to start. If a matching A record is available it will be used, else the server will refuse to start. If instead of the ipaddr config item the ipv6addr config item is used the server will check if it looks like an IPv6 address. If it does, the server will parse it, if it doesn't and DNS resolution is enabled, it will instead attempt to resolve it. If DNS resolution is not enabled the server will refuse to start. If a matching AAAA record is available it will be used, else the server will refuse to start. The behaviour is similar for the client, home_server and listen sections. Though those config items in client sections may have an optional /[0-9]{1,3} suffix to map clients to ranges of IP addresses. This should also work with things like example.org/96 though i'm not entirely sure why you'd ever want to do that. 'netmask' is now deprecated but will still function as expected until 3.1.0. These changes should make it slightly easier to manage v4/v6 transitions. Wildcard clients 0.0.0.0 <ipaddr>/0 '*' are not supported. -Arran Arran Cudbard-Bell <a.cudbardb(a)freeradius.org> FreeRADIUS Development Team FD31 3077 42EC 7FCD 32FE 5EE2 56CF 27F9 30A8 CAA2

5 15

Freeradius 3.0.7 regex check in module files doesn't work
by Stabla, Daniel 06 Mar '15

06 Mar '15

Hello, we maybe found a bug in Freeradius 3.0.7. We assign V-LAN's dynamically through the module files in the section post-auth. To assign the right VLAN, various attributes are checked like the NAS-Identifier. In 3.0.4 it works without problems, but in 3.0.7 the regex check doesn't seem to work. ################################### sites-enabled/default ################################### server eap_server { listen { ipaddr = * port = 1645 type = auth limit { } } authorize { eap { ok = return } } authenticate { Auth-Type PAP { } Auth-Type CHAP { } eap Auth-Type eap { eap { handled = 1 } if (handled && (Response-Packet-Type == Access-Challenge)) { } } } post-auth { update request { Stripped-User-Name := "%{mschap:User-Name}" Realm := "%{mschap:NT-Domain}" } update reply { Tunnel-Type := "13" Tunnel-Medium-Type := "6" } rad-vlan.authorize update reply { Tunnel-Private-Group-Id="%{control:Tunnel-Private-Group-Id}" } Post-Auth-Type REJECT { eap } } pre-proxy { update proxy-request { proxy-request:User-Name := "%{proxy-request:MS-CHAP-User-Name}" } } post-proxy { post_proxy_log eap } } ################################### mods-enabled/files ################################### files { filename = ${confdir}/radius-station-mac usersfile = ${confdir}/radius-station-mac compat = no EAP-TLS-Require-Client-Cert = yes } files radius-station-allow { usersfile = ${confdir}/radius-station-allow key = %{Stripped-User-Name} compat = cistron } files radius-station-ids { usersfile = ${confdir}/radius-station-ids key = %{Stripped-User-Name} compat = no } files radius-station-ids-test { usersfile = ${confdir}/radius-station-ids-test key = %{Stripped-User-Name} compat = cistron } files rad-vlan { usersfile = ${confdir}/rad-vlan key = %{Calling-Station-Id} compat = cistron Fall-Through = Yes } ################################### raddb/rad-vlan ################################### 12-34-56-78-90-AB NAS-Identifier =~ "WPA-GG.*", Stripped-User-Name == "ldapsearch123", Tunnel-Private-Group-Id := "200" 12-34-56-78-90-AB NAS-Identifier =~ "WPA-GG.*", Stripped-User-Name == "ldapsearch", Tunnel-Private-Group-Id := "200" 12-34-56-78-90-AB NAS-Identifier =~ "WPA-GG.*", Tunnel-Private-Group-Id := "200" DEFAULT Tunnel-Private-Group-Id := "001" ################################### Debug 3.0.7: ################################### (14) User-Name = 'materna\ldapsearch' (14) NAS-IP-Address = 127.0.0.1 (14) Calling-Station-Id = '12-34-56-78-90-AB' (14) Framed-MTU = 1400 (14) NAS-Port-Type = Wireless-802.11 (14) Connect-Info = 'CONNECT 11Mbps 802.11b' (14) NAS-Identifier = 'WPA-GG' (14) EAP-Message = 0x020e0050190017030100206d1d4cd5d01f3a7153236662e595c5daaaa6336c78322b05cc4c9fd9bc092eaf1703010020d37b532af4b18cb31b84ba696ea369a746e9f295e4f1e32a6d9081884be47bcd (14) State = 0xbfb2fbdeb2bce21540db8fbcb8edd37b (14) Message-Authenticator = 0x23a2fd8b9b2e1ade466b27c4b28100a3 (14) session-state: No cached attributes (14) # Executing section authorize from file ./etc/radius-eap//sites-enabled/default (14) authorize { (14) eap: Peer sent code Response (2) ID 14 length 80 (14) eap: Continuing tunnel setup (14) [eap] = ok (14) } # authorize = ok (14) Found Auth-Type = EAP (14) # Executing group from file ./etc/radius-eap//sites-enabled/default (14) authenticate { (14) eap: Expiring EAP session with state 0xbfb2fbdeb2bce215 (14) eap: Finished EAP session with state 0xbfb2fbdeb2bce215 (14) eap: Previous EAP request found for state 0xbfb2fbdeb2bce215, released from the list (14) eap: Peer sent method PEAP (25) (14) eap: EAP PEAP (25) (14) eap: Calling eap_peap to process EAP data (14) eap_peap: processing EAP-TLS (14) eap_peap: eaptls_verify returned 7 (14) eap_peap: Done initial handshake (14) eap_peap: eaptls_process returned 7 (14) eap_peap: FR_TLS_OK (14) eap_peap: Session established. Decoding tunneled attributes (14) eap_peap: PEAP state send tlv success (14) eap_peap: Received EAP-TLV response (14) eap_peap: Success (14) eap_peap: Using saved attributes from the original Access-Accept (14) eap_peap: User-Name = 'materna\ldapsearch' (14) eap_peap: Saving session b5f76169be377c4eb841c0ec3f4cc92488683fe647ffb81eb89abb1dbe84068f vps 0x7fab2c002200 in the cache (14) eap: Freeing handler (14) [eap] = ok (14) } # authenticate = ok (14) # Executing section post-auth from file ./etc/radius-eap//sites-enabled/default (14) post-auth { (14) update request { (14) EXPAND %{mschap:User-Name} (14) --> ldapsearch (14) Stripped-User-Name := "ldapsearch" (14) EXPAND %{mschap:NT-Domain} (14) --> materna (14) Realm := "materna" (14) } # update request = noop (14) update reply { (14) Tunnel-Type := VLAN (14) Tunnel-Medium-Type := IEEE-802 (14) } # update reply = noop (14) rad-vlan: EXPAND %{Calling-Station-Id} (14) rad-vlan: --> 12-34-56-78-90-AB (14) rad-vlan: EXPAND WPA-GG.* (14) rad-vlan: --> WPA-GG.* (14) rad-vlan: EXPAND WPA-GG.* (14) rad-vlan: --> WPA-GG.* (14) rad-vlan: users: Matched entry DEFAULT at line 4 (14) [rad-vlan.authorize] = ok (14) update reply { (14) EXPAND %{control:Tunnel-Private-Group-Id} (14) --> 001 (14) Tunnel-Private-Group-Id = "001" (14) } # update reply = noop (14) } # post-auth = ok (14) Login OK: [materna\ldapsearch/<via Auth-Type = EAP>] (from client sles11 port 0 cli 12-34-56-78-90-AB) (14) Sent Access-Accept Id 14 from 139.2.35.240:1645 to 139.2.38.67:55213 length 197 (14) User-Name = 'materna\ldapsearch' (14) MS-MPPE-Recv-Key = 0x106181fbc445a0ff2341792c573ab68ef78633d6308c7171c8a5db18d52fc33f (14) MS-MPPE-Send-Key = 0x7de75e7f18cc057b55abc4f1c3e41cfebfa3e7d32ef85ba091b7b42a2fc193e5 (14) EAP-Message = 0x030e0004 (14) Message-Authenticator = 0x00000000000000000000000000000000 (14) Tunnel-Type = VLAN (14) Tunnel-Medium-Type = IEEE-802 (14) Tunnel-Private-Group-Id = '001' (14) Finished request Thread 1 waiting to be assigned a request Waking up in 0.2 seconds. Waking up in 4.3 seconds. ################################### Debug 3.0.4: ################################### Thread 1 got semaphore Thread 1 handling request 14, (3 handled so far) User-Name = 'materna\ldapsearch' NAS-IP-Address = 127.0.0.1 Calling-Station-Id = '12-34-56-78-90-AB' Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = 'CONNECT 11Mbps 802.11b' NAS-Identifier = 'WPA-GG' EAP-Message = 0x020e0050190017030100200178abd6cb94ebd3a457a0e14cebf41f0ddd572a3d7dfd5867087817f0d5966a1703010020b3483f13ae714a12e4fc5151018f0691a8555d9c76983af3fbe8cd112e63266d State = 0xfc812f3df18f362cddee265392cf2627 Message-Authenticator = 0x500747f00648ebdd6ecce7c3770fe689 (14) Received Access-Request packet from host 139.2.38.67 port 41678, id=14, length=220 (14)User-Name = 'materna\ldapsearch' (14)NAS-IP-Address = 127.0.0.1 (14)Calling-Station-Id = '12-34-56-78-90-AB' (14)Framed-MTU = 1400 (14)NAS-Port-Type = Wireless-802.11 (14)Connect-Info = 'CONNECT 11Mbps 802.11b' (14)NAS-Identifier = 'WPA-GG' (14)EAP-Message = 0x020e0050190017030100200178abd6cb94ebd3a457a0e14cebf41f0ddd572a3d7dfd5867087817f0d5966a1703010020b3483f13ae714a12e4fc5151018f0691a8555d9c76983af3fbe8cd112e63266d (14)State = 0xfc812f3df18f362cddee265392cf2627 (14)Message-Authenticator = 0x500747f00648ebdd6ecce7c3770fe689 (14) # Executing section authorize from file /etc/radiusd/sites-enabled/default (14)authorize { (14)eap : Peer sent code Response (2) ID 14 length 80 (14)eap : Continuing tunnel setup (14)[eap] = ok (14)} #authorize = ok (14) Found Auth-Type = EAP (14) # Executing group from file /etc/radiusd/sites-enabled/default (14)authenticate { (14)eap : Expiring EAP session with state 0xfc812f3df18f362c (14)eap : Finished EAP session with state 0xfc812f3df18f362c (14)eap : Previous EAP request found for state 0xfc812f3df18f362c, released from the list (14)eap : Peer sent method PEAP (25) (14)eap : EAP PEAP (25) (14)eap : Calling eap_peap to process EAP data (14)eap_peap : processing EAP-TLS (14)eap_peap : eaptls_verify returned 7 (14)eap_peap : Done initial handshake (14)eap_peap : eaptls_process returned 7 (14)eap_peap : FR_TLS_OK (14)eap_peap : Session established.Decoding tunneled attributes (14)eap_peap : Peap state send tlv success (14)eap_peap : Received EAP-TLV response (14)eap_peap : Success (14)eap_peap : Using saved attributes from the original Access-Accept User-Name = 'materna\ldapsearch' (14)eap_peap : Saving session 467ec288d1ef3786548e67dd6ddc2493765cab9d520bef51307869c3cf86776a vps 0x7facbc003e90 in the cache (14)eap : Freeing handler (14)[eap] = ok (14)} #authenticate = ok (14) Login OK: [materna\ldapsearch/<via Auth-Type = EAP>] (from client sles11 port 0 cli 12-34-56-78-90-AB) (14) # Executing section post-auth from file /etc/radiusd/sites-enabled/default (14)post-auth { (14)update request { (14) EXPAND %{mschap:User-Name} (14)--> ldapsearch (14)Stripped-User-Name := "ldapsearch" (14) EXPAND %{mschap:NT-Domain} (14)--> materna (14)Realm := "materna" (14)} # update request = noop (14)update reply { (14)Tunnel-Type := VLAN (14)Tunnel-Medium-Type := IEEE-802 (14)} # update reply = noop (14)rad-vlan : EXPAND %{Calling-Station-Id} (14)rad-vlan :--> 12-34-56-78-90-AB (14)rad-vlan : EXPAND WPA-GG.* (14)rad-vlan :--> WPA-GG.* (14)rad-vlan : EXPAND WPA-GG.* (14)rad-vlan :--> WPA-GG.* (14)rad-vlan : EXPAND WPA-GG.* (14)rad-vlan :--> WPA-GG.* (14)rad-vlan : EXPAND WPA-GG.* (14)rad-vlan :--> WPA-GG.* (14)rad-vlan : users: Matched entry 12-34-56-78-90-AB at line 2 (14)[rad-vlan.authorize] = ok (14)update reply { (14) EXPAND %{control:Tunnel-Private-Group-Id} (14)--> 200 (14) Tunnel-Private-Group-Id = "200" (14)} # update reply = noop (14)} #post-auth = ok (14) Sending Access-Accept packet to host 139.2.38.67 port 41678, id=14, length=0 (14)User-Name = 'materna\ldapsearch' (14)MS-MPPE-Recv-Key = 0x8973d3f59b6ce58227550444df27760f7bd43151d1367444e1883aa5288a99dd (14)MS-MPPE-Send-Key = 0x1cc9775a68f9ed8715f7e50510981ea04330364949c228eb58a227a27352a440 (14)EAP-MSK = 0x8973d3f59b6ce58227550444df27760f7bd43151d1367444e1883aa5288a99dd1cc9775a68f9ed8715f7e50510981ea04330364949c228eb58a227a27352a440 (14)EAP-EMSK = 0xa8fc008102830647de31e83c4091d01c4717d0785bb964ab682b87b47c00bfe17aa903f0aa969e000d1835b2623128d6b4d585184b977c884176d1e1dbc9e8ee (14)EAP-Session-Id = 0x1954f85fa7840493a4abe8ee3c005b56ba8e198835115a1fef65c4e1ade3b674ac0ed3759d36b7b6033b489b000a4a6515eb1ec3ef719d7bf589cf8b132dba8b5c (14)EAP-Message = 0x030e0004 (14)Message-Authenticator = 0x00000000000000000000000000000000 (14)Tunnel-Type = VLAN (14)Tunnel-Medium-Type = IEEE-802 (14)Tunnel-Private-Group-Id = '200' Sending Access-Accept Id 14 from 139.2.35.240:1645 to 139.2.38.67:41678 User-Name = 'materna\ldapsearch' MS-MPPE-Recv-Key = 0x8973d3f59b6ce58227550444df27760f7bd43151d1367444e1883aa5288a99dd MS-MPPE-Send-Key = 0x1cc9775a68f9ed8715f7e50510981ea04330364949c228eb58a227a27352a440 EAP-Message = 0x030e0004 Message-Authenticator = 0x00000000000000000000000000000000 Tunnel-Type = VLAN Tunnel-Medium-Type = IEEE-802 Tunnel-Private-Group-Id = '200' (14) Finished request Thread 1 waiting to be assigned a request Waking up in 0.2 seconds. Waking up in 4.3 seconds. (0) Cleaning up request packet ID 0 with timestamp +2 (1) Cleaning up request packet ID 1 with timestamp +2 Kind regards. D. Stabla

2 1