- Freeradius-Users - lists.freeradius.org

Using FreeRadius as a relay for when external (Cloud) Radius servers go down?
by John Doe 13 Jan '15

13 Jan '15

Hi List! I am new to FreeRadius and am wondering: 1) If it is possible to set up FreeRadius as a relay for my external Radius service? 2) Is it possible to use this FreeRadius-server as a fallback when the external service goes down? 3) That would be a good start reading into how to set this up? I have seen "radrelay"[1], but this seems to be old. All help is greatly appreciated, Thanks, KL [1] http://linux.die.net/man/5/radrelay.conf

3 3

Fwd: 3.0.6 rlm_eap_gtc: Unknown Auth-Type perl
by Stefan Paetow 12 Jan '15

12 Jan '15

> On 12 Jan 2015, at 17:34, Nick Rogers <ncrogers(a)gmail.com> wrote: >> challenge = "Password: " >> auth_type = perl > > Change the auth_type to pap. Then in the authenticate section, modify the Auth-Type PAP { } stanza to call rlm_perl instead of pap. > > That will however also mean that EAP-TTLS/PAP and PAP itself will use the perl authenticator too. Stefan Paetow Moonshot Industry & Research Liaison Coordinator t: +44 (0)1235 822 125 gpg: 0x3FCE5142 xmpp: stefanp(a)jabber.dev.ja.net skype: stefan.paetow.janet Lumen House, Library Avenue, Harwell Oxford, Didcot, OX11 0SG jisc.ac.uk Jisc is a registered charity (number 1149740) and a company limited by guarantee which is registered in England under Company No. 5747339, VAT No. GB 197 0632 86. Jisc’s registered office is: One Castlepark, Tower Hill, Bristol, BS2 0JA. T 0203 697 5800. Jisc Collections and Janet Ltd. is a wholly owned Jisc subsidiary and a company limited by guarantee which is registered in England under Company No. number 2881024, VAT No. GB 197 0632 86. The registered office is: Lumen House, Library Avenue, Harwell, Didcot, Oxfordshire, OX11 0SG. T 01235 822200.

1 0

Exec SQL on disconnection
by Marcelo Santoro 12 Jan '15

12 Jan '15

Hi friends… i have another question about execute commands…. When my customer disconnect… i need to execute a SQL command in my database !!! How to do it ? Tks friends.

1 0

Re: Freeradius-Users post from santoro.ice@gmail.com requires approval
by Arran Cudbard-Bell 12 Jan '15

12 Jan '15

> On 10 Jan 2015, at 16:30, Arran Cudbard-Bell <a.cudbardb(a)freeradius.org> wrote: > > >> Arran… this is the output of radiusd -X in the exactly time where authentication occurs. >> >> The problem is here: >> >> expand: UPDATE acessos_clientes set con_id = (select con_id from concentradores where con_ip = '%{Nas-IP-Address}'), ace_last_ip = '%{reply:Framed-IP-Address}' where ace_login = '%{SQL-User-Name}' -> UPDATE acessos_clientes set con_id = (select con_id from concentradores where con_ip = '10.0.0.2'), ace_last_ip = '131.0.120.0' where ace_login = 'teste1' >> >> >> but it is Working perfectly… as you can see: >> con_id is 3 >> and >> ace_last_ip is 131.0.120.0 >> >> But the error is there: >> MySQL Error: No Fields >> >> >> OutPut: >> >> rad_recv: Access-Request packet from host 186.227.X.X port 33586, id=185, length=140 >> Service-Type = Framed-User >> Framed-Protocol = PPP >> NAS-Port = 15728654 >> NAS-Port-Type = Ethernet >> User-Name = "teste1" >> Calling-Station-Id = "C4:6E:1F:98:1D:4F" >> Called-Station-Id = "pppoe-1" >> NAS-Port-Id = "ether2" >> CHAP-Challenge = 0x4dacd856aa257c6bef6400aa5374954d >> CHAP-Password = 0x01be52df4c582bbf354be1b7d395fb9b8e >> NAS-Identifier = "PPPOE-1" >> NAS-IP-Address = 10.0.0.2 >> # Executing section authorize from file /etc/freeradius/sites-enabled/default >> +- entering group authorize {...} >> ++[preprocess] returns ok >> [chap] Setting 'Auth-Type := CHAP' >> ++[chap] returns ok >> ++[mschap] returns noop >> [eap] No EAP-Message, not doing EAP >> ++[eap] returns noop >> [sql] expand: %{User-Name} -> teste1 >> [sql] sql_set_user escaped user --> 'teste1' >> rlm_sql (sql): Reserving sql socket id: 119 >> [sql] expand: SELECT id, UserName, Attribute, Value, op FROM radcheck WHERE UserName = '%{SQL-User-Name}' AND status = '1' ORDER BY id -> SELECT id, UserName, Attribute, Value, op FROM radcheck WHERE UserName = 'teste1' AND status = '1' ORDER BY id >> rlm_sql_mysql: MYSQL check_error: 2006, returning SQL_DOWN >> rlm_sql (sql): Attempting to connect rlm_sql_mysql #119 >> rlm_sql_mysql: Starting connect to MySQL server for #119 >> rlm_sql (sql): Connected new DB handle, #119 >> WARNING: Found User-Password == "...". >> WARNING: Are you sure you don't mean Cleartext-Password? >> WARNING: See "man rlm_pap" for more information. >> [sql] User found in radcheck table >> [sql] expand: SELECT id, UserName, Attribute, Value, op FROM radreply WHERE UserName = '%{SQL-User-Name}' ORDER BY id -> SELECT id, UserName, Attribute, Value, op FROM radreply WHERE UserName = 'teste1' ORDER BY id >> [sql] expand: SELECT groupname FROM usergroup WHERE UserName = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM usergroup WHERE UserName = 'teste1' ORDER BY priority >> rlm_sql (sql): Released sql socket id: 119 >> ++[sql] returns ok >> ++[expiration] returns noop >> ++[logintime] returns noop >> [pap] WARNING: Auth-Type already set. Not setting to PAP >> ++[pap] returns noop >> Found Auth-Type = CHAP >> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! >> !!! Replacing User-Password in config items with Cleartext-Password. !!! >> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! >> !!! Please update your configuration so that the "known good" !!! >> !!! clear text password is in Cleartext-Password, and not in User-Password. !!! >> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! >> # Executing group from file /etc/freeradius/sites-enabled/default >> +- entering group CHAP {...} >> [chap] login attempt by "teste1" with CHAP password >> [chap] Using clear text password "102030" for user teste1 authentication. >> [chap] chap user teste1 authenticated succesfully >> ++[chap] returns ok >> Login OK: [teste1] (from client Auth_PPPOE_T1 port 15728654 cli C4:6E:1F:98:1D:4F) >> # Executing section post-auth from file /etc/freeradius/sites-enabled/default >> +- entering group post-auth {...} >> rlm_sql (sql): Reserving sql socket id: 118 >> [sqlippool] expand: %{User-Name} -> teste1 >> [sqlippool] sql_set_user escaped user --> 'teste1' >> [sqlippool] expand: START TRANSACTION -> START TRANSACTION >> rlm_sql_mysql: MYSQL check_error: 2006, returning SQL_DOWN >> rlm_sql (sql): Attempting to connect rlm_sql_mysql #118 >> rlm_sql_mysql: Starting connect to MySQL server for #118 >> rlm_sql (sql): Connected new DB handle, #118 >> [sqlippool] expand: UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE expiry_time <= NOW() - INTERVAL 1 SECOND AND nasipaddress = '%{Nas-IP-Address}' -> UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE expiry_time <= NOW() - INTERVAL 1 SECOND AND nasipaddress = '10.0.0.2' >> [sqlippool] expand: SELECT framedipaddress FROM radippool WHERE pool_name = '%{control:Pool-Name}' AND fixed ='N' AND (expiry_time < NOW() OR expiry_time IS NULL) ORDER BY (username <> '%{User-Name}'), (callingstationid <> '%{Calling-Station-Id}'), expiry_time LIMIT 1 FOR UPDATE -> SELECT framedipaddress FROM radippool WHERE pool_name = 'db_pool' AND fixed ='N' AND (expiry_time < NOW() OR expiry_time IS NULL) ORDER BY (username <> 'teste1'), (callingstationid <> 'C4:6E:1F:98:1D:4F'), expiry_time LIMIT 1 FOR UPDATE >> [sqlippool] expand: UPDATE radippool SET nasipaddress = '%{NAS-IP-Address}', pool_key = '%{NAS-IP-Address}-%{NAS-Port}', callingstationid = '%{Calling-Station-Id}', username = '%{User-Name}', expiry_time = NOW() + INTERVAL 8400 SECOND WHERE framedipaddress = '131.0.X.X' AND expiry_time IS NULL -> UPDATE radippool SET nasipaddress = '10.0.0.2', pool_key = '10.0.0.2-15728654', callingstationid = 'C4:6E:1F:98:1D:4F', username = 'teste1', expiry_time = NOW() + INTERVAL 8400 SECOND WHERE framedipaddress = '131.0.X.X' AND expiry_time IS NULL >> [sqlippool] Allocated IP 131.0.X.X [00780083] >> [sqlippool] expand: COMMIT -> COMMIT >> rlm_sql (sql): Released sql socket id: 118 >> [sqlippool] expand: Allocated IP: %{reply:Framed-IP-Address} from %{control:Pool-Name} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name}) -> Allocated IP: 131.0.X.X from db_pool (did pppoe-1 cli C4:6E:1F:98:1D:4F port 15728654 user teste1) >> Allocated IP: 131.0.X.X from db_pool (did pppoe-1 cli C4:6E:1F:98:1D:4F port 15728654 user teste1) >> ++[sqlippool] returns ok >> [sql] expand: %{User-Name} -> teste1 >> [sql] sql_set_user escaped user --> 'teste1' >> [sql] expand: %{User-Password} -> >> [sql] ... expanding second conditional >> [sql] expand: %{Chap-Password} -> 0x01be52df4c582bbf354be1b7d395fb9b8e >> [sql] expand: INSERT INTO radpostauth (User, pass, reply, date) VALUES ( '%{User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S') -> INSERT INTO radpostauth (User, pass, reply, date) VALUES ( 'teste1', '0x01be52df4c582bbf354be1b7d395fb9b8e', 'Access-Accept', '2015-01-09 11:54:21') >> rlm_sql (sql) in sql_postauth: query is INSERT INTO radpostauth (User, pass, reply, date) VALUES ( 'teste1', '0x01be52df4c582bbf354be1b7d395fb9b8e', 'Access-Accept', '2015-01-09 11:54:21') >> rlm_sql (sql): Reserving sql socket id: 117 >> rlm_sql_mysql: MYSQL check_error: 2006, returning SQL_DOWN >> rlm_sql (sql): Attempting to connect rlm_sql_mysql #117 >> rlm_sql_mysql: Starting connect to MySQL server for #117 >> rlm_sql (sql): Connected new DB handle, #117 >> rlm_sql (sql): Released sql socket id: 117 >> ++[sql] returns ok >> ++[exec] returns noop >> sql_xlat >> expand: %{User-Name} -> teste1 >> sql_set_user escaped user --> 'teste1' >> expand: UPDATE acessos_clientes set con_id = (select con_id from concentradores where con_ip = '%{Nas-IP-Address}'), ace_last_ip = '%{reply:Framed-IP-Address}' where ace_login = '%{SQL-User-Name}' -> UPDATE acessos_clientes set con_id = (select con_id from concentradores where con_ip = '10.0.0.2'), ace_last_ip = '131.0.X.X' where ace_login = 'teste1' >> rlm_sql (sql): Reserving sql socket id: 116 >> rlm_sql_mysql: MYSQL check_error: 2006, returning SQL_DOWN >> rlm_sql (sql): Attempting to connect rlm_sql_mysql #116 >> rlm_sql_mysql: Starting connect to MySQL server for #116 >> rlm_sql (sql): Connected new DB handle, #116 >> rlm_sql_mysql: MYSQL Error: No Fields >> rlm_sql_mysql: MYSQL error: >> rlm_sql (sql): Attempting to connect rlm_sql_mysql #116 >> rlm_sql_mysql: Starting connect to MySQL server for #116 >> rlm_sql (sql): Connected new DB handle, #116 >> rlm_sql (sql): failed after re-connect >> SQL query did not succeed >> rlm_sql (sql): Released sql socket id: 116 >> expand: %{sql: UPDATE acessos_clientes set con_id = (select con_id from concentradores where con_ip = '%{Nas-IP-Address}'), ace_last_ip = '%{reply:Framed-IP-Address}' where ace_login = '%{SQL-User-Name}'} -> >> ++[request] returns noop >> Sending Access-Accept of id 185 to 186.227.47.X.X port 33586 >> Mikrotik-Rate-Limit := "1024k/800k 1024k/1024k 1024k/512k 300/300" >> Framed-IP-Address = 131.0.X.X >> Finished request 0. >> Going to the next request >> Waking up in 1.9 seconds. >> rad_recv: Accounting-Request packet from host 186.227.47.X.X port 48371, id=186, length=143 >> Service-Type = Framed-User >> Framed-Protocol = PPP >> NAS-Port = 15728654 >> NAS-Port-Type = Ethernet >> User-Name = "teste1" >> Calling-Station-Id = "C4:6E:1F:98:1D:4F" >> Called-Station-Id = "pppoe-1" >> NAS-Port-Id = "ether2" >> Acct-Session-Id = "81c0000e" >> Framed-IP-Address = 131.0.X.X >> Acct-Authentic = RADIUS >> Event-Timestamp = "Jan 9 2015 11:54:34 BRST" >> Acct-Status-Type = Start >> NAS-Identifier = "PPPOE-1" >> Acct-Delay-Time = 0 >> NAS-IP-Address = 10.0.0.2 >> # Executing section preacct from file /etc/freeradius/sites-enabled/default >> +- entering group preacct {...} >> ++[preprocess] returns ok >> [acct_unique] Hashing 'NAS-Port = 15728654,Client-IP-Address = 186.227.47.X.X,NAS-IP-Address = 10.0.0.2,Acct-Session-Id = "81c0000e",User-Name = "teste1"' >> [acct_unique] Acct-Unique-Session-ID = "e7a32bf7b37ce3d6". >> ++[acct_unique] returns ok >> [suffix] No '@' in User-Name = "teste1", looking up realm NULL >> [suffix] No such realm "NULL" >> ++[suffix] returns noop >> ++[files] returns noop >> # Executing section accounting from file /etc/freeradius/sites-enabled/default >> +- entering group accounting {...} >> rlm_sql (sql): Reserving sql socket id: 115 >> [sqlippool] expand: %{User-Name} -> teste1 >> [sqlippool] sql_set_user escaped user --> 'teste1' >> [sqlippool] expand: START TRANSACTION -> START TRANSACTION >> rlm_sql_mysql: MYSQL check_error: 2006, returning SQL_DOWN >> rlm_sql (sql): Attempting to connect rlm_sql_mysql #115 >> rlm_sql_mysql: Starting connect to MySQL server for #115 >> rlm_sql (sql): Connected new DB handle, #115 >> [sqlippool] expand: UPDATE radippool SET expiry_time = NOW() + INTERVAL 8400 SECOND WHERE nasipaddress = '%{NAS-IP-Address}' AND pool_key = '%{NAS-IP-Address}-%{NAS-Port}' AND username = '%{User-Name}' AND callingstationid = '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}' -> UPDATE radippool SET expiry_time = NOW() + INTERVAL 8400 SECOND WHERE nasipaddress = '10.0.0.2' AND pool_key = '10.0.0.2-15728654' AND username = 'teste1' AND callingstationid = 'C4:6E:1F:98:1D:4F' AND framedipaddress = '131.0.X.X' >> [sqlippool] expand: COMMIT -> COMMIT >> rlm_sql (sql): Released sql socket id: 115 >> ++[sqlippool] returns ok >> ++[exec] returns noop >> [sql] expand: %{User-Name} -> teste1 >> [sql] sql_set_user escaped user --> 'teste1' >> [sql] expand: %{Acct-Delay-Time} -> 0 >> [sql] expand: INSERT INTO radacct (acctsessionid, acctuniqueid, UserName, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, acctstartdelay, acctstopdelay, xascendsessionsvrkey) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', '%S', '0000-00-00 00:00:00', '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP >> rlm_sql (sql): Reserving sql socket id: 114 >> rlm_sql_mysql: MYSQL check_error: 2006, returning SQL_DOWN >> rlm_sql (sql): Attempting to connect rlm_sql_mysql #114 >> rlm_sql_mysql: Starting connect to MySQL server for #114 >> rlm_sql (sql): Connected new DB handle, #114 >> rlm_sql (sql): Released sql socket id: 114 >> ++[sql] returns ok >> [attr_filter.accounting_response] expand: %{User-Name} -> teste1 >> attr_filter: Matched entry DEFAULT at line 12 >> ++[attr_filter.accounting_response] returns updated >> Sending Accounting-Response of id 186 to 186.227.47.X.X port 48371 >> Finished request 1. >> Cleaning up request 1 ID 186 with timestamp +121 >> Going to the next request >> Waking up in 1.9 seconds. >> Cleaning up request 0 ID 185 with timestamp +121 >> Ready to process requests. > I have no idea. Looks like the connections are timing out MySQL side, so when you come to use them, they're no longer viable. Not sure if this is triggering the other error though. Might be worth using wireshark to get a capture between FreeRADIUS and MySQL. I've found that's sometimes helpful in diagnosing weird issues like this. If you want to upgrade to 3.0.6 and post the results, i'll help to try track it down. Otherwise i'm not really interested in debugging v2.2.x issues, or enhancing the debug output for the SQL module in v2.2.x such that the problem becomes easier to diagnose. -Arran Arran Cudbard-Bell <a.cudbardb(a)freeradius.org> FreeRADIUS development team FD31 3077 42EC 7FCD 32FE 5EE2 56CF 27F9 30A8 CAA2 Arran Cudbard-Bell <a.cudbardb(a)freeradius.org> FreeRADIUS development team FD31 3077 42EC 7FCD 32FE 5EE2 56CF 27F9 30A8 CAA2

5 7

problem using mschapv2 (marcos)
by Rui Ribeiro 12 Jan '15

12 Jan '15

Hi Marcos, I would advise you using something more recent than 2.1.10 if possible. Nevertheless many things can go wrong with such setup to enumerate here. I would advise you to read a little more about it. There is more than radius.conf to it. Run it with freeradius -X and do the debug of SAMBA and html_auth manually in the command line to understand better what is happening. Was there some recent change, like an AD upgrade? Regards -- Rui Ribeiro Senior Sysadm ISCTE-IUL https://www.linkedin.com/pub/rui-ribeiro/16/ab8/434 > Message: 1 > Date: Sun, 11 Jan 2015 13:42:03 +0100 > From: marcos <deconya(a)riseup.net> > To: freeradius-users(a)lists.freeradius.org > Subject: problem using mschapv2 > Message-ID: <54B26F9B.6090000(a)riseup.net> > Content-Type: text/plain; charset=windows-1252 > > Hi > > Im checking a server with freeradius 2.1.10 and Im having problems > validating. In this case I discovered how logs pass the validation > process with mschapv2 without asking to the user username and password, > and taking local client username how the user. The first step checking > EAP goes well, but now second step changes withouth aparently reason. > > Any idea? Which file controls this? radiusd.conf? > > Thanks! > > -- > For private content :-) > Public key 0x0C05942A895BD10E > FIngerprint 45B9 EC0B 58D5 B17C 8C37 95C3 0C05 942A 895B D10E > > > -- Regards, -- Rui Ribeiro Senior Sysadm ISCTE-IUL https://www.linkedin.com/pub/rui-ribeiro/16/ab8/434

2 1

problem using mschapv2
by marcos 11 Jan '15

11 Jan '15

Hi Im checking a server with freeradius 2.1.10 and Im having problems validating. In this case I discovered how logs pass the validation process with mschapv2 without asking to the user username and password, and taking local client username how the user. The first step checking EAP goes well, but now second step changes withouth aparently reason. Any idea? Which file controls this? radiusd.conf? Thanks! -- For private content :-) Public key 0x0C05942A895BD10E FIngerprint 45B9 EC0B 58D5 B17C 8C37 95C3 0C05 942A 895B D10E

2 1

Content filtering enabled
by Arran Cudbard-Bell 10 Jan '15

10 Jan '15

Content filtering has now been enabled. All HTML email will now automatically be converted to plaintext. Only attachments with these content types will be accepted: * multipart/mixed * multipart/alternative * text/plain * image/svg+xml * image/png All others will be stripped. Hopefully this will stop the majority of image banners, and work around poorly behaved mail clients and users of those mail clients. Arran Cudbard-Bell <a.cudbardb(a)freeradius.org> FreeRADIUS development team FD31 3077 42EC 7FCD 32FE 5EE2 56CF 27F9 30A8 CAA2

1 0

Password Hashed + Salted before authentication with an embedded script
by Robert Graham 10 Jan '15

10 Jan '15

Ia there a way to embed a python script into freeradius 3 to hash and salt the users password before authenticating to the MS SQL database... We have a USERNAME HASHEDPASSWORD SALT column in our database. I want to be able to compare the two passwords that are both hased before allowing the user to connect...

4 12

RE: Pleace help (Lic. Lester Perez)
by David Mitton 09 Jan '15

09 Jan '15

EAP-MD5 was deprecated by default in Windows Vista forward. (check your calendars!) However, the code remains and can be turned back on with some registry tweaks. This article doesn't say it, but Windows Server and NPS still have the capability, given some support site user comments. https://support.microsoft.com/kb/922574/en-us/ Dave. Quoting Arran Cudbard-Bell <a.cudbardb(a)freeradius.org>: >> On 9 Jan 2015, at 16:36, Rui Ribeiro <ruyrybeyro(a)gmail.com> wrote: >> >> >> Hi Lester, >> >> I could swear MD5 is not supported in Windows > > I'm fairly sure it is in windows. Though doesn't produce keying > material so useless > for WPA-Enterprise. > > -Arran > > Arran Cudbard-Bell <a.cudbardb(a)freeradius.org> > FreeRADIUS development team > > FD31 3077 42EC 7FCD 32FE 5EE2 56CF 27F9 30A8 CAA2 > > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html ----- End forwarded message -----

1 0

Most stable version of FreeRadius ?
by Sautron Nick 09 Jan '15

09 Jan '15

Hello, I am in training in Master in computer science , and I have set up freeradius and eduroam service. I want to know that it is the most stable version of freeradius? Thank you for your reply Best Regards

3 3