- Freeradius-Users - lists.freeradius.org

Problem with radiusd and vmware?
by Robert Graham 07 Jan '15

07 Jan '15

I have a problem that I cannot figure out. I have installed RedHat, CentOS, Fedora 20 & 21 and FR 2.x.x and the new version 3.x.x, all of which in VM Workstation. I have internet access inside each of the VM's, inbound and outbound. Installed the Easysoft UnixODBC driver and the generic driver. Can connect through ISQL and pull data manually. The issue is only when RADIUSD -X is running that it will not make a connection to the SQL database. Same error on every single VM machine and they are all manually connectable through ISQL. The configuration message says that the config is ok when I run the check on it. Have Wireshark running and does not show any traffic from the RADIUSD server, but if I open up a browser in any of the Linux, shows traffic.. rlm_sql (sql): Driver rlm_sql_unixodbc (module rlm_sql_unixodbc) loaded and linked rlm_sql (sql): Attempting to connect to database "gensql" rlm_sql (sql): Initialising connection pool pool { start = 5 min = 4 max = 10 spare = 3 uses = 0 lifetime = 0 cleanup_delay = 5 idle_timeout = 60 spread = no } rlm_sql (sql): Opening additional connection (0) rlm_sql_unixodbc: Connection failed rlm_sql_unixodbc: Socket destructor called, closing socket rlm_sql (sql): Opening connection failed (0) rlm_sql (sql): Removing connection pool /etc/raddb/mods-enabled/sql[47]: Instantiation failed for module "sql" [root@2nCSSw9999 ~]# ---------------------------------------------------------------------- } Configuration appears to be OK.

2 1

Clients.conf
by Clive 07 Jan '15

07 Jan '15

Probably a very easy question to answer.... I have added the following to the clients.conf Client clientname { Ipaddr = xxx.xxx.xxx.xxx Secret = xxxxxxxxxx Shortname = clientname Nastype = other } When running radiusd -X I expect to see under the section "loading clients" this client to be in the list, but all I am seeing is the default 127.0.0.1 client. The client is an anchor WLC and although I am seeing a 1812 packet through the firewall to the WLC address, I am not seeing anything on the WLC log files. Is this correct or not? Until the actual whole configuration process is complete is there another way I can test the workings from the WLC to the freeRADIUS box? Thanks Clive Sent from my iPad

2 3

If statement regex match with multiple similar attributes
by jberry＠plus.net 07 Jan '15

07 Jan '15

Hi there, Freeradius version: 2.2.5 I have a question relating to how if statements applied to a packet are handled. I have a packet something like this (I¹ve snipped a load of stuff) that contains 2 class attributes: Framed-Protocol = PPP Class = 0x5030323a3*************************************** ... Class = 0x434653494421**************** ... I am trying to overwrite some attributes in the post-auth section based on a Class attribute matching a given string being present. I can get this working like so using a sting comparison on the hex: if( reply:Class =~ /^0x5030323a3/ ) { update reply { ... } } What I can¹t get to work is making the if statement check the second Class attribute (the one I actually want to check!). It is not feasible to change the order they appear because of the complexity of the system (and tbh I would probably not want to assume it would always be second). So if I go with: if( reply:Class =~ /^0x434653494421/ ) { update reply { ... } } The debug shows it trying and failing to match ++? if (reply:Class =~ /0x434653494421/ ) ? Evaluating (reply:Class =~ /0x434653494421/) -> FALSE ++? if (reply:Class =~ /0x434653494421/ ) -> FALSE Any ideas? I can¹t find anything in the docs or on google (mainly because its a really hard search term) Thanks, -- Josh Berry Senior Systems Engineer Plusnet PLC | www.plus.net Phone: 01142 733547 Registered Office: The Balance | 2 Pinfold Street | Sheffield | S1 2GU Registered in England no: 3279013

2 1

Question about radcheck sql!
by Haviaras Kostas 07 Jan '15

07 Jan '15

Or it is better to change this sql_user_name = "%{User-Name}" with my query ?

2 1

proxying without relam
by Tevfik Ceydeliler 07 Jan '15

07 Jan '15

Hi, I am really newbie about free radius. I try to use sqlip pool to assign IP address to my authenticated user. But I have two type OTP server to check password :mOTP and Secovid (one time password dungle) How can I send my authenticate requests those two OTP server depend of user ? But, I cant use username@realm type usernames. My users use only username. Any idea? -- <br> <img src="http://www.yasar.com.tr/banner/yhbanner.jpg"> </img> <br><br> Bu elektronik postada bulunan tum fikir ve gorusler ve ekindeki dosyalar sadece adres sahip/sahiplerine ait olup, Yasar Toplulugu Sirketleri bu mesajin icerigi ile ilgili olarak hic bir hukuksal sorumlulugu kabul etmez. Eger gonderilmesi dusunulen kisi veya kurulus degilseniz, lutfen gonderen kisiyi derhal haberdar ediniz ve mesaji sisteminizden siliniz.The information contained in this e-mail and any files transmitted with it are intended solely for the use of the individual or entity to whom they are addressed and Yasar Group Companies do not accept legal responsibility for the contents. If you are not the intended recipient, please immediately notify the sender and delete it from your system.

2 4

Question about EAP and creating/installing certificates from a MS 2008 CA server from Active Directory
by Tim Reimers 06 Jan '15

06 Jan '15

Hi everyone - I'm looking for any tips from someone who has configured Freeradius 3.01 to use certificates created by a Microsoft 2008R2 CA server. The documents I've found on certificates all seem to refer to a local CA server on the *nix box where Freeradius is, and also refer (way too much in 2015) to Windows XP. I'm trying to follow the guidelines here from way back in 2006, and getting some of the same issues someone else posted about, where the certificate template isn't specified and causes the CA server to barf at importing the request. http://lists.freeradius.org/pipermail/freeradius-users/2006-October/013613.… Is there anyone who has documented their steps on setting up certificates from Centos/Freeradius to a Windows 2008 CA ? thanks, Tim

3 2

Could use some help setting up freeradius ttls-pap with ldap backend serving NT-passwords
by Arjan Sinnige 05 Jan '15

05 Jan '15

Ok first post here. Howdy.. Name is Arjan. Sorry for the long post in advance. Currently our small school is running a mac osx tiger file/web server with radius slapped onto it. As the server is getting old, I've been asked to configure a new server. (Dell 720 running Ubuntu 14.10.) Clients are numerous formats (BYOD) but mainly osx and windows machines. Testing virtually at home atm. The Apache, LDAP and Samba part are fine for me. But freeradius is really tough.. Can use some help. Trying to get a EAP-TTLS with PAP working, as that was what we had before. Users are supposed to login with their username and password. No user certificates. Doing a pap or mschap from server terminal is fine, which means the connection to ldap seems to be working. Doing TTLS-PAP from android phone gives errors. The mailing list won't allow me to post my full config and output. (>100KB) so I've put it up at a website : http://www.audiodude.nl/ldapconfig.txt Here a few excerpts: radtest -t mschap arjan Mypassword^3 localhost 0 mypassword ends with : Ready to process requests. rad_recv: Access-Request packet from host 127.0.0.1 port 44458, id=134, length=131 User-Name = "arjan" NAS-IP-Address = 127.0.1.1 NAS-Port = 0 Message-Authenticator = 0xe851266b3b6672aed5d53caecf5421b9 MS-CHAP-Challenge = 0x6e5a7c9078ec9181 MS-CHAP-Response = 0x0001000000000000000000000000000000000000000000000000e8c0afd962f70b27eae06ed24a3fd2e53950c029a26de960 # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop [mschap] Found MS-CHAP attributes. Setting 'Auth-Type = mschap' ++[mschap] returns ok ++[digest] returns noop [suffix] No '@' in User-Name = "arjan", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] No EAP-Message, not doing EAP ++[eap] returns noop ++[files] returns noop [ldap] performing user authorization for arjan [ldap] expand: %{Stripped-User-Name} -> [ldap] ... expanding second conditional [ldap] expand: %{User-Name} -> arjan [ldap] expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) -> (uid=arjan) [ldap] expand: ou=Users,dc=mysite,dc=nl -> ou=Users,dc=mysite,dc=nl [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] attempting LDAP reconnection [ldap] (re)connect to ldapserv.mysite.nl:389, authentication 0 [ldap] bind as cn=admin,dc=mysite,dc=nl/Mypassword^3 to ldapserv.mysite.nl:389 [ldap] waiting for bind result ... [ldap] Bind was successful [ldap] performing search in ou=Users,dc=mysite,dc=nl, with filter (uid=arjan) [ldap] No default NMAS login sequence [ldap] looking for check items in directory... [ldap] userPassword -> Password-With-Header == "{SSHA}EO6u+XXXXXXXXXXXXXXXXXXX9CVEpL" [ldap] sambaNtPassword -> NT-Password == 0x323444323XXXXXXXXXXXXXXXXXXX136453246 [ldap] sambaLmPassword -> LM-Password == 0x4437314142XXXXXXXXXXXXXXXXXXX7343541363935 [ldap] looking for reply items in directory... [ldap] user arjan authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] Normalizing NT-Password from hex encoding [pap] Normalizing LM-Password from hex encoding [pap] Normalizing SSHA1-Password from base64 encoding [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = MSCHAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group MS-CHAP {...} [mschap] Found LM-Password [mschap] Found NT-Password [mschap] Told to do MS-CHAPv1 with NT-Password [mschap] adding MS-CHAPv1 MPPE keys ++[mschap] returns ok # Executing section post-auth from file /etc/freeradius/sites-enabled/default +- entering group post-auth {...} ++[exec] returns noop Sending Access-Accept of id 134 to 127.0.0.1 port 44458 MS-CHAP-MPPE-Keys = 0xd71ab5a02f21bf6c84ea1619e12e6d233ad6e6fe70164f220000000000000000 MS-MPPE-Encryption-Policy = 0x00000001 MS-MPPE-Encryption-Types = 0x00000006 Finished request 0. So LDAP seems ok. But doing a EAP-TTLS-PAP produces results below : Should I change something in the EAP.conf file ? ttls { default_eap_type = md5 copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" } THX in advance guys ! Ready to process requests. rad_recv: Access-Request packet from host 192.168.63.144 port 32869, id=0, length=123 User-Name = "arjan" NAS-IP-Address = 192.168.63.144 Called-Station-Id = "20aa4b81f8a3" Calling-Station-Id = "64a769fde8c7" NAS-Identifier = "20aa4b81f8a3" NAS-Port = 18 Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x0200000a0161726a616e Message-Authenticator = 0x2f7a9f1fe7f8586e05b801511990fa64 # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "arjan", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 0 length 10 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop [ldap] performing user authorization for arjan [ldap] expand: %{Stripped-User-Name} -> [ldap] ... expanding second conditional [ldap] expand: %{User-Name} -> arjan [ldap] expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) -> (uid=arjan) [ldap] expand: ou=Users,dc=mysite,dc=nl -> ou=Users,dc=mysite,dc=nl [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] attempting LDAP reconnection [ldap] (re)connect to ldapserv.mysite.nl:389, authentication 0 [ldap] bind as cn=admin,dc=mysite,dc=nl/Mypassword^3 to ldapserv.mysite.nl:389 [ldap] waiting for bind result ... [ldap] Bind was successful [ldap] performing search in ou=Users,dc=mysite,dc=nl, with filter (uid=arjan) [ldap] No default NMAS login sequence [ldap] looking for check items in directory... [ldap] userPassword -> Password-With-Header == "{SSHA}EO6u+XXXXXXXXXXXXXXXXXXX9CVEpL" [ldap] sambaNtPassword -> NT-Password == 0x323444323XXXXXXXXXXXXXXXXXXX136453246 [ldap] sambaLmPassword -> LM-Password == 0x4437314142XXXXXXXXXXXXXXXXXXX7343541363935 [ldap] looking for reply items in directory... [ldap] user arjan authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] Normalizing NT-Password from hex encoding [pap] Normalizing LM-Password from hex encoding [pap] Normalizing SSHA1-Password from base64 encoding [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group authenticate {...} [eap] EAP Identity [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 0 to 192.168.63.144 port 32869 EAP-Message = 0x010100061520 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xb4cfcc79b4ced9bce030871567d52b3d Finished request 0. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.63.144 port 32869, id=0, length=327 Cleaning up request 0 ID 0 with timestamp +41 User-Name = "arjan" NAS-IP-Address = 192.168.63.144 Called-Station-Id = "20aa4b81f8a3" Calling-Station-Id = "64a769fde8c7" NAS-Identifier = "20aa4b81f8a3" NAS-Port = 18 Framed-MTU = 1400 State = 0xb4cfcc79b4ced9bce030871567d52b3d NAS-Port-Type = Wireless-802.11 EAP-Message = 0x020100c4150016030100b9010000b5030154a9bcfe6fc055caad760b07efb122cc8df68813c63eaf12f11c3c770607a803000048c014c00a00390038c00fc0050035c012c00800160013c00dc003000ac013c00900330032c00ec004002fc011c007c00cc002000500040015001200090014001100080006000300ff01000044000b000403000102000a00340032000100020003000400050006000700080009000a000b000c000d000e000f001000110012001300140015001600170018001900230000 Message-Authenticator = 0xa56f2ecfe109fcdef933ff8083a95981 # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "arjan", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 1 length 196 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/ttls [eap] processing type ttls [ttls] Authenticate [ttls] processing EAP-TLS [ttls] eaptls_verify returned 7 [ttls] Done initial handshake [ttls] (other): before/accept initialization [ttls] TLS_accept: before/accept initialization [ttls] <<< TLS 1.0 Handshake [length 00b9], ClientHello [ttls] TLS_accept: SSLv3 read client hello A [ttls] >>> TLS 1.0 Handshake [length 0039], ServerHello [ttls] TLS_accept: SSLv3 write server hello A [ttls] >>> TLS 1.0 Handshake [length 080c], Certificate [ttls] TLS_accept: SSLv3 write certificate A [ttls] >>> TLS 1.0 Handshake [length 014b], ServerKeyExchange [ttls] TLS_accept: SSLv3 write key exchange A [ttls] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [ttls] TLS_accept: SSLv3 write server done A [ttls] TLS_accept: SSLv3 flush data [ttls] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [ttls] eaptls_process returned 13 ++[eap] returns handled Sending Access-Challenge of id 0 to 192.168.63.144 port 32869 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0xcd9d8cef411761a8d4ef22af Message-Authenticator = 0x00000000000000000000000000000000 State = 0xb4cfcc79b5cdd9bce030871567d52b3d Finished request 1. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.63.144 port 32869, id=0, length=309 Cleaning up request 1 ID 0 with timestamp +41 User-Name = "arjan" NAS-IP-Address = 192.168.63.144 Called-Station-Id = "20aa4b81f8a3" Calling-Station-Id = "64a769fde8c7" NAS-Identifier = "20aa4b81f8a3" NAS-Port = 18 Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x020100c4150016030100b9010000b5030154a9bcfe6fc055caad760b07efb122cc8df68813c63eaf12f11c3c770607a803000048c014c00a00390038c00fc0050035c012c00800160013c00dc003000ac013c00900330032c00ec004002fc011c007c00cc002000500040015001200090014001100080006000300ff01000044000b000403000102000a00340032000100020003000400050006000700080009000a000b000c000d000e000f001000110012001300140015001600170018001900230000 Message-Authenticator = 0x3e826a011acf3c3c7c4ee12c132df594 # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "arjan", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 1 length 196 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group authenticate {...} [eap] Either EAP-request timed out OR EAP-response to an unknown EAP-request [eap] Failed in handler ++[eap] returns invalid Failed to authenticate the user. Using Post-Auth-Type Reject # Executing group from file /etc/freeradius/sites-enabled/default +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> arjan attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 2 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 2 Sending Access-Reject of id 0 to 192.168.63.144 port 32869

2 4

EAP used for plain MAC authentication?
by jm+freeradiususer＠roth.lu 05 Jan '15

05 Jan '15

Hi there, I hope you don't mind if I ask something at first not directly related to freeradius. In fact, we have some of those Cisco SG series small-business switches on which we wanted to implement plain MAC address-based authentication just like with other Cisco IOS gear (Mac Auth Bypass) and also gear from other vendors like Extreme. Now, those Cisco SG devices are also capable of doing dynamic vlan assignment BUT they don't accept any VLAN in return unless a full EAP conversation has taken place, even when only in MAC-auth mode, not in 802.1x. The other gear has no problem accepting a Tunnel-Private-Group-ID attribute in plain mode. Is that something you would say they (Cisco) have to liberty to implement as they wish and I don't understand things clearly, or is it that they didn't understand things clearly when implementing a MAC-based authentication using 802.1x nevertheless. In fact the interesting part of their manual says this: --start quote-- MAC-based authentication is an alternative to 802.1X authentication that allows network access to devices (such as printers and IP phones) that do not have the 802.1X supplicant capability. MAC-based authentication uses the MAC address of the connecting device to grant or deny network access. In this case, the switch supports EAP MD5 functionality with the username and password equal to the client MAC address --end quote-- It's mainly that last sentence that I'm wondering about. In any case this is going to make my life more difficult, as I will have to treat those SG devices differently from all the other gear we have... Thanks for your opinion. Bye, Marki

6 15

Version 3.0.6 has been released
by Alan DeKok 05 Jan '15

05 Jan '15

Change log is available at: http://freeradius.org/press/index.html#3.0.6 Alan DeKok.

2 2

Local user and LDAP
by Manuel Izquierdo 05 Jan '15

05 Jan '15

Hi I am new using freeradius. I am trying to configure freeradius to authenticate with LDAP and it is working well. Also I want to use a local user in the users file to use from network manager server but this user must be authenticated in local and don´t go to the LDAP. This is my configuration: /etc/raddb/sites-available/default authorize { preprocess chap mschap digest files ldap } /etc/raddb/users admin Cleartext-Password := ¨setup¨ DEFAULT LDAP-GROUP == ¨Network-monitor” DEFAULT Auth-Type = Local Fall-Through = yes With this configuration always is working LDAP, if you do a debug using the local user I can see: - [ files ] returns ok - Now start again LDAP ?? …. WARNING: Auth-Type already set. Not setting to PAP Failed to authenticate the user I don’t know why it trying using LDAP. Please, would you mind the simplest way to have a local user and LDAP working. If it is the local user don´t use LDAP or if LDAP not found the user user local file. Regards Manuel Izquierdo Calvo Senior Technical Specialist Mail: mizq14(a)gmail.com <mailto:mizq14@gmail.com> Mob: + 61 431 452 049

3 4