- Freeradius-Users - lists.freeradius.org

Creating certificates with a password that has spaces in it
by Jasvinder S. Bahra 10 Dec '14

10 Dec '14

Hi, I am setting up FreeRadius on a FreeBSD system in an EAP-TLS configuration. As part of that process, I need to create a number of certificates. To do so, I am following the instructions detailed in the README file (in the /usr/local/etc/raddb/certs folder). The passwords i've set in the three CNF files are made up of multiple words. However, when I try and execute the "make server.pem" command, I get an error. As a test, I set the input and output passwords both to "One Two Three 4" in the ca.cnf file, and executed the "make ca.pem" and "make ca.der" steps successfully. When I tried to execute "make server.pem" however... =====8<===== [root@server certs]# make server.pem /usr/local/bin/openssl req -new -out server.csr -keyout server.key -config ./se rver.cnf Generating a 2048 bit RSA private key ................................+++ .............................................................+++ writing new private key to 'server.key' ----- /usr/local/bin/openssl ca -batch -keyfile ca.key -cert ca.pem -in erver.csr -k ey `grep output_password ca.cnf | sed 's/.*=//;s/^ *//'` -out server.crt -extens ions xpserver_ext -extfile xpextensions -config ./server.cnf unknown option Two usage: ca args =====8<===== The "unknown options Two" line suggests that only the first word of the password is used and that openssl thinks the rest of the password are other parameters. I've tried enclosing the passwords (in the CNF files) in both single quotes and double quotes, but have had no success. Is it possible to create certificates with passwords that have spaces in them, using these make commands? Regards, Jazz

3 4

3.0.4: proxy-to-vserver and proxied post-auth?
by Stefan Winter 10 Dec '14

10 Dec '14

Hello, I've migrated almost all my virtual servers - but one - to 3.0.4. There's one thing which I had expected to work, but it doesn't, but I do recall some discussions around this on the list; but not what the final verdict was. My proxied-to vserver needs to do some stuff in post-auth. However it looks like post-auth is not actually called; instead, only the post-auth of the original vserver is. Is that desired/expected behaviour in 3.0.4? The symptoms of this boils down to these two lines: Debug: (55) modsingle[authenticate]: returned from pap (rlm_pap) for request 55 Debug: (55) [pap] = ok Debug: (55) } # Auth-Type PAP = ok Debug: (55) Empty post-proxy section. Using default return values. Debug: (55) Found Auth-Type = Accept Debug: (55) Auth-Type = Accept, accepting the user Debug: (55) # Executing section post-auth from file /usr/local/freeradius/config/raddb/sites-enabled/AAI The PAP instance there is the one from the proxied-to vserver; must be, as it knows my password and the retrieval of that password is unique to the vserver in question. The next line speaks about empty post-proxy; that looks like the initial vserver kicks in right after authenticate { } with its PAP is finished. It then executes post-auth from the initial vserver, not the one from proxied-to (the proxied-to vserver is called "staff", not "AAI"). That's not helpful for my setup :-( So... just wondering if this is a bug or if I'm going to need a majorish rethink of my post-auth logic here... Greetings, Stefan Winter -- Stefan WINTER Ingenieur de Recherche Fondation RESTENA - Réseau Téléinformatique de l'Education Nationale et de la Recherche 6, rue Richard Coudenhove-Kalergi L-1359 Luxembourg Tel: +352 424409 1 Fax: +352 422473 PGP key updated to 4096 Bit RSA - I will encrypt all mails if the recipient's key is known to me http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xC0DE6A358A39DC66

2 3

ldapperf - v0.3 released
by Arran Cudbard-Bell 09 Dec '14

09 Dec '14

If anyone's still interested in ldapperf: https://github.com/arr2036/ldapperf/releases/tag/v0.3 Now crash free! -Arran Arran Cudbard-Bell <a.cudbardb(a)freeradius.org> FreeRADIUS development team FD31 3077 42EC 7FCD 32FE 5EE2 56CF 27F9 30A8 CAA2

2 1

SQL query difficulties
by Dave Aldwinckle 09 Dec '14

09 Dec '14

Hello, When I run an SQL query from freeradius, I get no results. When I copy and paste the query into mysql, there is a result. Configs and debug below; help is appreciated. I have a wireless captive portal that sends Access-Request messages like so: (7) Received Access-Request Id 120 from 172.16.2.202:43036 to 123.12.128.5:1812 length 218 (7) NAS-IP-Address = 172.16.2.222 (7) NAS-Port = 0 (7) NAS-Port-Type = Wireless-802.11 (7) User-Name = 'c8:bc:c8:ed:27:68' (7) User-Password = 'c8:bc:c8:ed:27:68' (7) Service-Type = Login-User (7) Calling-Station-Id = 'c8:bc:c8:ed:27:68' (7) Called-Station-Id = '00:1a:1e:00:2b:30' (7) Aruba-Essid-Name = 'uw-unsecured' (7) Aruba-Location-Id = 'AS-AP-MC-1095-B' (7) Aruba-AP-Group = 'MC-std' (7) Attr-26 = 0x000039e70c02 (7) Message-Authenticator = 0xcd12451619e8e44483843b9a1330e5a7 (7) session-state: No State attribute What I am trying to do, is check an SQL database for the existence of User-Name = 'c8:bc:c8:ed:27:68'. If it exists, accept, otherwise reject. Below is the virtual server I've created for this: server uw_portal { authorize { if("%{sql:SELECT COUNT(macaddress) FROM `radmacauthgroup` WHERE macaddress = '%{User-Name}'" > 0){ accept } else { reject } } } This record does actually exist..... $ mysql -uradius -p wifimacauth Enter password: mysql> show databases; +--------------------+ | Database | +--------------------+ | information_schema | | test | | wifimacauth | +--------------------+ 3 rows in set (0.00 sec) mysql> use wifimacauth; Database changed mysql> show tables; +-----------------------+ | Tables_in_wifimacauth | +-----------------------+ | nas | | radcheck | | radgroupcheck | | radgroupreply | | radmacauthgroup | | radpostauth | | radreply | | radusergroup | | retiredmacauthgroup | +-----------------------+ 9 rows in set (0.00 sec) mysql> SELECT COUNT(macaddress) FROM `radmacauthgroup` WHERE macaddress = 'c8:bc:c8:ed:27:68'; +-------------------+ | COUNT(macaddress) | +-------------------+ | 1 | +-------------------+ 1 row in set (0.00 sec) # radiusd -X radiusd: FreeRADIUS Version 3.0.5, for host x86_64-redhat-linux-gnu, built on Dec 8 2014 at 10:44:02 Copyright (C) 1999-2014 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/raddb/dictionary including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/mods-enabled/ including configuration file /etc/raddb/mods-enabled/exec including configuration file /etc/raddb/mods-enabled/ntlm_auth including configuration file /etc/raddb/mods-enabled/expr including configuration file /etc/raddb/mods-enabled/dynamic_clients including configuration file /etc/raddb/mods-enabled/preprocess including configuration file /etc/raddb/mods-enabled/unix including configuration file /etc/raddb/mods-enabled/digest including configuration file /etc/raddb/mods-enabled/chap including configuration file /etc/raddb/mods-enabled/detail.log including configuration file /etc/raddb/mods-enabled/linelog including configuration file /etc/raddb/mods-enabled/pap including configuration file /etc/raddb/mods-enabled/cache_eap including configuration file /etc/raddb/mods-enabled/logintime including configuration file /etc/raddb/mods-enabled/expiration including configuration file /etc/raddb/mods-enabled/always including configuration file /etc/raddb/mods-enabled/detail including configuration file /etc/raddb/mods-enabled/utf8 including configuration file /etc/raddb/mods-enabled/echo including configuration file /etc/raddb/mods-enabled/radutmp including configuration file /etc/raddb/mods-enabled/eap including configuration file /etc/raddb/mods-enabled/unpack including configuration file /etc/raddb/mods-enabled/sradutmp including configuration file /etc/raddb/mods-enabled/sql including configuration file /etc/raddb/mods-config/sql/main/sqlite/queries.conf including configuration file /etc/raddb/mods-enabled/dhcp including configuration file /etc/raddb/mods-enabled/passwd including configuration file /etc/raddb/mods-enabled/mschap including configuration file /etc/raddb/mods-enabled/realm including configuration file /etc/raddb/mods-enabled/soh including configuration file /etc/raddb/mods-enabled/files including configuration file /etc/raddb/mods-enabled/replicate including configuration file /etc/raddb/mods-enabled/attr_filter including files in directory /etc/raddb/policy.d/ including configuration file /etc/raddb/policy.d/abfab-tr including configuration file /etc/raddb/policy.d/control including configuration file /etc/raddb/policy.d/operator-name including configuration file /etc/raddb/policy.d/filter including configuration file /etc/raddb/policy.d/eap including configuration file /etc/raddb/policy.d/dhcp including configuration file /etc/raddb/policy.d/cui including configuration file /etc/raddb/policy.d/accounting including configuration file /etc/raddb/policy.d/debug including configuration file /etc/raddb/policy.d/canonicalization including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/uw_portal including configuration file /etc/raddb/sites-enabled/inner-tunnel main { security { allow_core_dumps = no } } main { name = "radiusd" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" libdir = "/usr/lib64/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = yes auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes allow_vulnerable_openssl = "yes" } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } realm UW_PORTAL_REALM { virtual_server = uw_portal } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client wn-wc-mc-1061a { ipaddr = 172.16.2.196 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client wn-wc-phy-211 { ipaddr = 172.16.2.197 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client wn-wc-mc-1061a-a { ipaddr = 172.16.2.198 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client wn-wc-mc-1061a-b { ipaddr = 172.16.2.199 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client wn-wc-mc-1061a-c { ipaddr = 172.16.2.200 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client wn-wc-phy-211-a { ipaddr = 172.16.2.201 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client wn-wc-phy-211-b { ipaddr = 172.16.2.202 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client wn-wc-phy-211-c { ipaddr = 172.16.2.203 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached radiusd: #### Instantiating modules #### instantiate { } modules { # Loaded module rlm_exec # Instantiating module "exec" from file /etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Instantiating module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_expr # Instantiating module "expr" from file /etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_dynamic_clients # Instantiating module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_preprocess # Instantiating module "preprocess" from file /etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups" hints = "/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /etc/raddb/mods-config/preprocess/hints # Loaded module rlm_unix # Instantiating module "unix" from file /etc/raddb/mods-enabled/unix unix { radwtmp = "/var/log/radius/radwtmp" } # Loaded module rlm_digest # Instantiating module "digest" from file /etc/raddb/mods-enabled/digest # Loaded module rlm_chap # Instantiating module "chap" from file /etc/raddb/mods-enabled/chap # Loaded module rlm_detail # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } # Instantiating module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } # Instantiating module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } # Loaded module rlm_linelog # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog linelog { filename = "/var/log/radius/linelog" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{Packet-Type}:-default}" } # Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/var/log/radius/linelog-accounting" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_pap # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_cache # Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap cache cache_eap { key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 16384 epoch = 0 add_stats = no } # Loaded module rlm_logintime # Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_expiration # Instantiating module "expiration" from file /etc/raddb/mods-enabled/expiration # Loaded module rlm_always # Instantiating module "reject" from file /etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Instantiating module "fail" from file /etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Instantiating module "ok" from file /etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Instantiating module "handled" from file /etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Instantiating module "noop" from file /etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Instantiating module "updated" from file /etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail detail { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } # Loaded module rlm_utf8 # Instantiating module "utf8" from file /etc/raddb/mods-enabled/utf8 # Instantiating module "echo" from file /etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_radutmp # Instantiating module "radutmp" from file /etc/raddb/mods-enabled/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_eap # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no mod_accounting_username_bug = no max_sessions = 1024 } # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 ca_path = "/etc/raddb/certs" pem_file_type = yes private_key_file = "/etc/raddb/certs/server.pem" certificate_file = "/etc/raddb/certs/server.pem" ca_file = "/etc/raddb/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/raddb/certs/dh" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" ecdh_curve = "prime256v1" cache { enable = yes lifetime = 24 max_entries = 255 } verify { } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_method = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Loaded module rlm_unpack # Instantiating module "unpack" from file /etc/raddb/mods-enabled/unpack # Instantiating module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_sql # Instantiating module "sql" from file /etc/raddb/mods-enabled/sql sql { driver = "rlm_sql_null" server = "localhost" port = "3306" login = "radius" password = <<< secret >>> radius_db = "wifimacauth" read_groups = yes read_profiles = yes read_clients = no delete_stale_sessions = yes sql_user_name = "%{User-Name}" default_user_profile = "" client_query = "SELECT id, nasname, shortname, type, secret, server FROM nas" authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{Sql-Group}' ORDER BY id" authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{Sql-Group}' ORDER BY id" group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority" simul_count_query = "" simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" accounting { reference = "%{tolower:type.%{Acct-Status-Type}.query}" type { accounting-on { query = "UPDATE radacct SET acctstoptime = %{%{integer:Event-Timestamp}:-date('now')}, acctsessiontime = %{%{integer:Event-Timestamp}:-strftime('%%s', 'now')} - strftime('%%s', acctstarttime)), acctterminatecause = '%{Acct-Terminate-Cause}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= %{integer:Event-Timestamp}" } accounting-off { query = "UPDATE radacct SET acctstoptime = %{%{integer:Event-Timestamp}:-date('now')}, acctsessiontime = %{%{integer:Event-Timestamp}:-strftime('%%s', 'now')} - strftime('%%s', acctstarttime)), acctterminatecause = '%{Acct-Terminate-Cause}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= %{integer:Event-Timestamp}" } start { query = "INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime,acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', %{%{integer:Event-Timestamp}:-date('now')}, %{%{integer:Event-Timestamp}:-date('now')}, NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}')" } interim-update { query = "UPDATE radacct SET acctupdatetime = %{%{integer:Event-Timestamp}:-date('now')}, acctinterval = 0, framedipaddress = '%{Framed-IP-Address}', acctsessiontime = '%{Acct-Session-Time}', acctinputoctets = %{%{Acct-Input-Gigawords}:-0} << 32 | %{%{Acct-Input-Octets}:-0}, acctoutputoctets = %{%{Acct-Output-Gigawords}:-0} << 32 | %{%{Acct-Output-Octets}:-0} WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'" } stop { query = "UPDATE radacct SET acctstoptime = %{%{integer:Event-Timestamp}:-date('now')}, acctsessiontime = '%{Acct-Session-Time}', acctinputoctets = %{%{Acct-Input-Gigawords}:-0} << 32 | %{%{Acct-Input-Octets}:-0}, acctoutputoctets = %{%{Acct-Output-Gigawords}:-0} << 32 | %{%{Acct-Output-Octets}:-0}, acctterminatecause = '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'" } } } post-auth { reference = ".query" query = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')" } } rlm_sql (sql): Driver rlm_sql_null (module rlm_sql_null) loaded and linked rlm_sql (sql): Attempting to connect to database "wifimacauth" rlm_sql (sql): Initialising connection pool pool { start = 5 min = 4 max = 32 spare = 3 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 1 spread = no } rlm_sql (sql): Opening additional connection (0) rlm_sql (sql): Opening additional connection (1) rlm_sql (sql): Opening additional connection (2) rlm_sql (sql): Opening additional connection (3) rlm_sql (sql): Opening additional connection (4) # Loaded module rlm_dhcp # Instantiating module "dhcp" from file /etc/raddb/mods-enabled/dhcp # Loaded module rlm_passwd # Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Loaded module rlm_mschap # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes } # Loaded module rlm_realm # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_soh # Instantiating module "soh" from file /etc/raddb/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_files # Instantiating module "files" from file /etc/raddb/mods-enabled/files files { filename = "/etc/raddb/mods-config/files/authorize" usersfile = "/etc/raddb/mods-config/files/authorize" acctusersfile = "/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy" compat = "cistron" } reading pairlist file /etc/raddb/mods-config/files/authorize [/etc/raddb/mods-config/files/authorize]:2 Cistron compatibility checks for entry DEFAULT ... [/etc/raddb/mods-config/files/authorize]:184 Cistron compatibility checks for entry DEFAULT ... [/etc/raddb/mods-config/files/authorize]:191 Cistron compatibility checks for entry DEFAULT ... [/etc/raddb/mods-config/files/authorize]:198 Cistron compatibility checks for entry DEFAULT ... reading pairlist file /etc/raddb/mods-config/files/authorize [/etc/raddb/mods-config/files/authorize]:2 Cistron compatibility checks for entry DEFAULT ... [/etc/raddb/mods-config/files/authorize]:184 Cistron compatibility checks for entry DEFAULT ... [/etc/raddb/mods-config/files/authorize]:191 Cistron compatibility checks for entry DEFAULT ... [/etc/raddb/mods-config/files/authorize]:198 Cistron compatibility checks for entry DEFAULT ... reading pairlist file /etc/raddb/mods-config/files/accounting reading pairlist file /etc/raddb/mods-config/files/pre-proxy # Loaded module rlm_replicate # Instantiating module "replicate" from file /etc/raddb/mods-enabled/replicate # Loaded module rlm_attr_filter # Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/raddb/radiusd.conf } # server server default { # from file /etc/raddb/sites-enabled/default # Creating Auth-Type = digest # Loading authenticate {...} # Loading authorize {...} Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default server uw_portal { # from file /etc/raddb/sites-enabled/uw_portal # Loading authorize {...} } # server uw_portal server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 as server default Listening on acct address * port 1813 as server default Listening on auth address 127.0.0.1 port 18120 as server inner-tunnel Opening new proxy socket 'proxy address * port 0' Listening on proxy address * port 52549 Ready to process requests (7) Received Access-Request Id 120 from 172.16.2.202:43036 to 10.10.10.10:1812 length 218 (7) NAS-IP-Address = 172.16.2.222 (7) NAS-Port = 0 (7) NAS-Port-Type = Wireless-802.11 (7) User-Name = 'c8:bc:c8:ed:27:68' (7) User-Password = 'c8:bc:c8:ed:27:68' (7) Service-Type = Login-User (7) Calling-Station-Id = 'c8:bc:c8:ed:27:68' (7) Called-Station-Id = '00:1a:1e:00:2b:30' (7) Aruba-Essid-Name = 'uw-unsecured' (7) Aruba-Location-Id = 'AS-AP-MC-1095-B' (7) Aruba-AP-Group = 'MC-std' (7) Attr-26 = 0x000039e70c02 (7) Message-Authenticator = 0xcd12451619e8e44483843b9a1330e5a7 (7) session-state: No State attribute (7) # Executing section authorize from file /etc/raddb/sites-enabled/default (7) authorize { (7) policy filter_username { (7) if (!&User-Name) { (7) if (!&User-Name) -> FALSE (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@.*@/ ) { (7) if (&User-Name =~ /@.*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /(a)\./) { (7) if (&User-Name =~ /(a)\./) -> FALSE (7) } # policy filter_username = notfound (7) [preprocess] = ok (7) [chap] = noop (7) [mschap] = noop (7) [digest] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "c8:bc:c8:ed:27:68", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) eap: No EAP-Message, not doing EAP (7) [eap] = noop (7) files: users: Matched entry DEFAULT at line 2 (7) [files] = ok (7) [expiration] = noop (7) [logintime] = noop (7) [pap] = noop (7) } # authorize = ok Proxying to virtual server uw_portal (7) session-state: No State attribute (7) # Executing section authorize from file /etc/raddb/sites-enabled/uw_portal (7) authorize { (7) if ("%{sql:SELECT COUNT(macaddress) FROM `radmacauthgroup` WHERE macaddress = '%{User-Name}'" > 0){ (7) EXPAND %{User-Name} (7) --> c8:bc:c8:ed:27:68 (7) SQL-User-Name set to 'c8:bc:c8:ed:27:68' rlm_sql (sql): Reserved connection (4) rlm_sql (sql): Executing query: 'SELECT COUNT(macaddress) FROM `radmacauthgroup` WHERE macaddress = 'c8:bc:c8:ed:27:68'' (7) SQL query returned no results rlm_sql (sql): Released connection (4) (7) EXPAND %{sql:SELECT COUNT(macaddress) FROM `radmacauthgroup` WHERE macaddress = '%{User-Name}' (7) --> (7) if ("%{sql:SELECT COUNT(macaddress) FROM `radmacauthgroup` WHERE macaddress = '%{User-Name}'" > 0) -> FALSE (7) else { (7) [reject] = reject (7) } # else = reject (7) } # authorize = reject (7) Invalid user: [c8:bc:c8:ed:27:68] (from client wn-wc-phy-211-b port 0 cli c8:bc:c8:ed:27:68 via TLS tunnel) (7) Using Post-Auth-Type Reject (7) Finished internally proxied request. (7) # Executing section post-proxy from file /etc/raddb/sites-enabled/default (7) post-proxy { (7) eap: No pre-existing handler found (7) [eap] = noop (7) } # post-proxy = noop (7) Login incorrect (Home Server says so): [c8:bc:c8:ed:27:68] (from client wn-wc-phy-211-b port 0 cli c8:bc:c8:ed:27:68) (7) Using Post-Auth-Type Reject (7) # Executing group from file /etc/raddb/sites-enabled/default (7) Post-Auth-Type REJECT { (7) attr_filter.access_reject: EXPAND %{User-Name} (7) attr_filter.access_reject: --> c8:bc:c8:ed:27:68 (7) attr_filter.access_reject: Matched entry DEFAULT at line 11 (7) [attr_filter.access_reject] = updated (7) eap: Request didn't contain an EAP-Message, not inserting EAP-Failure (7) [eap] = noop (7) policy remove_reply_message_if_eap { (7) if (&reply:EAP-Message && &reply:Reply-Message) { (7) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (7) else { (7) [noop] = noop (7) } # else = noop (7) } # policy remove_reply_message_if_eap = noop (7) } # Post-Auth-Type REJECT = updated (7) Delaying response for 1.000000 seconds Thanks for your time. Dave -- Dave Aldwinckle Network Support Specialist Information Systems and Technology, TIS Phone: (519)-888-4567 ext. 31145

2 2

Module-Failure-Message when using PEAP or TTLS
by Dean Goldhill 09 Dec '14

09 Dec '14

Hello, When using EAP PEAP or TTLS, if I try to write the '%{Module-Failure-Message}' in the post-auth section to SQL, the value is blank when the reason is incorrect password. When using a non-tunnelled authentication protocol, it correctly displays 'rlm_pap: CLEAR TEXT password check failed' I think I know why this is happening, because the rejection happens prior to the last message in the EAP sequence, so the value of the module-failure-message is no longer populated in the last message sent to the device, which is when the post-auth is done. And I have read somewhere that using the caching feature can cache the value of the module-failure-message at the point of it happening, and then retrieve it when the post-auth is done. But I can't see to find any examples how to do this specifically using the cache feature. Does anyone have a working example of this they would like to share with me please? Thanks

2 3

pam Google authenticator and Ldap
by Joshua Elcik 08 Dec '14

08 Dec '14

Running FreeRADIUS Version 2.1.10, for host x86_64-pc-linux-gnu installed on Ubuntu 12.04 I've got ldap working correctly and its searching within Active Directory groups to make sure that the person is in particular group to get an Accept message. What I'm looking to do, and this is where I need help and maybe its not even possible, but I ideally I want to be able to configure my cisco ASA to use the FreeRadius server to do dual authentication using ldap and the Google authenticator, so is this even really possible. So the flow would look like - user logins into the anyconnect client using active directory creds, FreeRadius would check to make sure that user is in a certain group, vpn or vpnadmin. If the user is in the group that user would then be prompted for the Google Auth digits and if the user entered that in correctly the user would be allowed to connect to the vpn. I understand I would have to use PAM in order for the Google authenticator to work but is this something that has to happen in the post-auth? root@freerad01:/etc/freeradius# freeradius -X FreeRADIUS Version 2.1.10, for host x86_64-pc-linux-gnu, built on Feb 24 2014 at 15:16:50 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /etc/freeradius/radiusd.conf including configuration file /etc/freeradius/proxy.conf including configuration file /etc/freeradius/clients.conf including files in directory /etc/freeradius/modules/ including configuration file /etc/freeradius/modules/passwd including configuration file /etc/freeradius/modules/inner-eap including configuration file /etc/freeradius/modules/pap including configuration file /etc/freeradius/modules/unix including configuration file /etc/freeradius/modules/checkval including configuration file /etc/freeradius/modules/ntlm_auth including configuration file /etc/freeradius/modules/attr_filter including configuration file /etc/freeradius/modules/perl including configuration file /etc/freeradius/modules/acct_unique including configuration file /etc/freeradius/modules/counter including configuration file /etc/freeradius/modules/policy including configuration file /etc/freeradius/modules/files including configuration file /etc/freeradius/modules/realm including configuration file /etc/freeradius/modules/pam including configuration file /etc/freeradius/modules/cui including configuration file /etc/freeradius/modules/preprocess including configuration file /etc/freeradius/modules/expr including configuration file /etc/freeradius/modules/ippool including configuration file /etc/freeradius/modules/krb5 including configuration file /etc/freeradius/modules/wimax including configuration file /etc/freeradius/modules/logintime including configuration file /etc/freeradius/modules/detail including configuration file /etc/freeradius/modules/exec including configuration file /etc/freeradius/modules/linelog including configuration file /etc/freeradius/modules/otp including configuration file /etc/freeradius/modules/mac2vlan including configuration file /etc/freeradius/modules/ldap including configuration file /etc/freeradius/modules/always including configuration file /etc/freeradius/modules/digest including configuration file /etc/freeradius/modules/attr_rewrite including configuration file /etc/freeradius/modules/etc_group including configuration file /etc/freeradius/modules/detail.example.com including configuration file /etc/freeradius/modules/sradutmp including configuration file /etc/freeradius/modules/dynamic_clients including configuration file /etc/freeradius/modules/opendirectory including configuration file /etc/freeradius/modules/sqlcounter_expire_on_login including configuration file /etc/freeradius/modules/expiration including configuration file /etc/freeradius/modules/sql_log including configuration file /etc/freeradius/modules/radutmp including configuration file /etc/freeradius/modules/chap including configuration file /etc/freeradius/modules/echo including configuration file /etc/freeradius/modules/detail.log including configuration file /etc/freeradius/modules/smbpasswd including configuration file /etc/freeradius/modules/smsotp including configuration file /etc/freeradius/modules/mac2ip including configuration file /etc/freeradius/modules/mschap including configuration file /etc/freeradius/eap.conf including configuration file /etc/freeradius/policy.conf including files in directory /etc/freeradius/sites-enabled/ including configuration file /etc/freeradius/sites-enabled/inner-tunnel including configuration file /etc/freeradius/sites-enabled/default main { user = "root" group = "root" allow_core_dumps = no } including dictionary file /etc/freeradius/dictionary main { prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 require_message_authenticator = yes zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 irt = 2 mrt = 16 mrc = 5 mrd = 30 } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client 10.10.10.0/24 { require_message_authenticator = no secret = "testing123" nastype = "other" } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating module "exec" from file /etc/freeradius/modules/exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating module "expr" from file /etc/freeradius/modules/expr Module: Linked to module rlm_expiration Module: Instantiating module "expiration" from file /etc/freeradius/modules/expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating module "logintime" from file /etc/freeradius/modules/logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_chap Module: Instantiating module "chap" from file /etc/freeradius/modules/chap Module: Linked to module rlm_mschap Module: Instantiating module "mschap" from file /etc/freeradius/modules/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --username=%{mschap:User-Name:-None} --domain=%{%{mschap:NT-Domain}:-NEXTPT.COM} --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}" } Module: Linked to module rlm_pam Module: Instantiating module "pam" from file /etc/freeradius/modules/pam pam { pam_auth = "radiusd" } Module: Linked to module rlm_unix Module: Instantiating module "unix" from file /etc/freeradius/modules/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Module: Linked to module rlm_ldap Module: Instantiating module "ldap" from file /etc/freeradius/modules/ldap ldap { server = "10.10.10.110" port = 389 password = "password" identity = "cn=Account,ou=Next Point,dc=nextpt,dc=com" net_timeout = 1 timeout = 4 timelimit = 3 tls_mode = no start_tls = no tls_require_cert = "allow" tls { start_tls = no require_cert = "allow" } basedn = "ou=Next Point,dc=nextpt,dc=com" filter = "(sAMAccountName=%{Stripped-User-Name:-%{User-Name}})" base_filter = "(objectclass=radiusprofile)" auto_header = no access_attr_used_for_allow = yes chase_referrals = yes rebind = yes groupname_attribute = "cn" groupmembership_filter = "(|(&(objectClass=GroupOfNames)(member=%{control:Ldap-UserDn}))(&(objectClas s=GroupOfUniqueNames)(uniquemember=%{control:Ldap-UserDn})))" groupmembership_attribute = "memberOf" dictionary_mapping = "/etc/freeradius/ldap.attrmap" ldap_debug = 0 ldap_connections_number = 5 compare_check_items = no do_xlat = yes edir_account_policy_check = no set_auth_type = yes } rlm_ldap: Registering ldap_groupcmp for Ldap-Group rlm_ldap: Registering ldap_xlat with xlat_name ldap rlm_ldap: reading ldap<->radius mappings from file /etc/freeradius/ldap.attrmap rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password rlm_ldap: LDAP sambaLmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP sambaNtPassword mapped to RADIUS NT-Password rlm_ldap: LDAP dBCSPwd mapped to RADIUS LM-Password rlm_ldap: LDAP userPassword mapped to RADIUS Password-With-Header rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network rlm_ldap: LDAP radiusClass mapped to RADIUS Class rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS Framed-AppleTalk-Network rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message rlm_ldap: LDAP radiusTunnelType mapped to RADIUS Tunnel-Type rlm_ldap: LDAP radiusTunnelMediumType mapped to RADIUS Tunnel-Medium-Type rlm_ldap: LDAP radiusTunnelPrivateGroupId mapped to RADIUS Tunnel-Private-Group-Id conns: 0x8e5da0 Module: Linked to module rlm_eap Module: Instantiating module "eap" from file /etc/freeradius/eap.conf eap { default_eap_type = "mschapv2" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 4096 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 CA_path = "/etc/freeradius/certs" pem_file_type = yes private_key_file = "/etc/freeradius/certs/server.key" certificate_file = "/etc/freeradius/certs/server.pem" CA_file = "/etc/freeradius/certs/ca.pem" private_key_password = "whatever" dh_file = "/etc/freeradius/certs/dh" random_file = "/dev/urandom" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/etc/freeradius/certs/bootstrap" cache { enable = no lifetime = 24 max_entries = 255 } verify { } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_files Module: Instantiating module "files" from file /etc/freeradius/modules/files files { usersfile = "/etc/freeradius/users" acctusersfile = "/etc/freeradius/acct_users" preproxy_usersfile = "/etc/freeradius/preproxy_users" compat = "no" } Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating module "radutmp" from file /etc/freeradius/modules/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating module "attr_filter.access_reject" from file /etc/freeradius/modules/attr_filter attr_filter attr_filter.access_reject { attrsfile = "/etc/freeradius/attrs.access_reject" key = "%{User-Name}" } } # modules } # server server { # from file /etc/freeradius/radiusd.conf modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating module "pap" from file /etc/freeradius/modules/pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_digest Module: Instantiating module "digest" from file /etc/freeradius/modules/digest Module: Checking authorize {...} for more modules to load Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating module "preprocess" from file /etc/freeradius/modules/preprocess preprocess { huntgroups = "/etc/freeradius/huntgroups" hints = "/etc/freeradius/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Linked to module rlm_acct_unique Module: Instantiating module "acct_unique" from file /etc/freeradius/modules/acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Linked to module rlm_realm Module: Instantiating module "suffix" from file /etc/freeradius/modules/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating module "detail" from file /etc/freeradius/modules/detail detail { detailfile = "/var/log/freeradius/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/modules/attr_filter attr_filter attr_filter.accounting_response { attrsfile = "/etc/freeradius/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on authentication address 127.0.0.1 port 18120 as server inner-tunnel Listening on proxy address * port 1814 Ready to process requests.

2 1

Looking for a FreeRadius Freelancer
by Simon P. Abraham 08 Dec '14

08 Dec '14

Hello All, I am looking for a free radius freelancer, anyone interested? Thanks. Simon

2 2

Dual CA configuration for Free Radius - Concatenate Certificates
by Jorge Ivan Montoya Marin 05 Dec '14

05 Dec '14

We need to create new CA in the Free Radius Server, but also we need current keep working. How to concatenate the certificates in the Free Radius Server ? Thanks. Regards, Jorge Iván Montoya M. | Administrador Core Network | Internet | DIRECTV Colombia | Autopista Norte N° 103-60 Piso 2, Bogotá PBX. (57) 1 6516000 Ext. 1299 email: jormar(a)directvla.com.co<mailto:jormar@directvla.com.co>

1 0

dual CA configuration for EAP-TLS
by Leandro 05 Dec '14

05 Dec '14

Hello FR users: I need to create a new CA-clientes certs batch but also need to keep current working. On a third party AAA server I used to make an append to the current CA cert like: cat newCAcert.crt >> currentCAcert.crt then restart service and server was able to work with both CA certs. Is it possible to achieve the same with FR ? Regards, Leandro.

2 2

xl2tp+radius+mysql
by Xu Tingting 05 Dec '14

05 Dec '14

Dear All, I have configured openswan+xl2tp+radius. If i run xl2tpd without radius authentication, it works fine. But while configure with radius authentication , it failes. Following are my configureations. ipsec.conf ------------------------------------- config setup protostack=netkey nat_traversal=yes virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12 oe=off conn L2TP-PSK-NAT rightsubnet=vhost:%priv also=L2TP-PSK-noNAT conn L2TP-PSK-noNAT authby=secret pfs=no auto=add keyingtries=3 rekey=no ikelifetime=8h type=transport left=Server-IP leftprotoport=17/1701 right=%any rightprotoport=17/%any ------------------------------ xl2tpd.conf ------------------------------------------------------- [global] listen-addr = Server-IP force userspace = yes [lns default] ip range = 192.168.8.2-192.168.8.254 local ip = 192.168.8.1 require chap = yes refuse pap = yes require authentication = yes name = xl2tpd ppp debug = yes pppoptfile = /etc/ppp/options.xl2tpd length bit = yes -------------------------------------------------------- name xl2tpd require-mschap-v2 auth ms-dns 8.8.8.8 ms-dns 8.8.4.4 nodefaultroute idle 1800 debug lock nobsdcomp novj novjccomp nologfd lcp-echo-interval 5 lcp-echo-failure 5 proxyarp connect-delay 5000 plugin radius.so plugin radattr.so radius-config-file /etc/radiusclient/radiusclient.conf -------------------------------------- the logfile: ------------------ Dec 5 03:36:43 vpn2 xl2tpd[22927]: Connection established to IP, 1701. Local: 23899, Remote: 18 (ref=0/0). LNS session is 'default' Dec 5 03:36:43 vpn2 xl2tpd[22927]: Call established with IP, Local: 30311, Remote: 1, Serial: 0 Dec 5 03:36:43 vpn2 pppd[23048]: Plugin radius.so loaded. Dec 5 03:36:43 vpn2 pppd[23048]: RADIUS plugin initialized. Dec 5 03:36:43 vpn2 pppd[23048]: Plugin radattr.so loaded. Dec 5 03:36:43 vpn2 pppd[23048]: RADATTR plugin initialized. Dec 5 03:36:43 vpn2 pppd[23048]: pppd 2.4.5 started by root, uid 0 Dec 5 03:36:43 vpn2 pppd[23048]: Using interface ppp0 Dec 5 03:36:43 vpn2 pppd[23048]: Connect: ppp0 <--> /dev/pts/1 Dec 5 03:36:47 vpn2 pppd[23048]: rc_avpair_new: unknown attribute 60 Dec 5 03:36:48 vpn2 pppd[23048]: Peer xul2tp failed CHAP authentication Dec 5 03:36:48 vpn2 pppd[23048]: Connection terminated. Dec 5 03:36:48 vpn2 pppd[23048]: Exit. Dec 5 03:36:48 vpn2 xl2tpd[22927]: call_close: Call 30311 to IP disconnected Dec 5 03:36:48 vpn2 xl2tpd[22927]: control_finish: Connection closed to IP, serial 0 () Dec 5 03:36:48 vpn2 xl2tpd[22927]: control_finish: Connection closed to IP, port 1701 (), Local: 23899, Remote: 18 There is no errors for my radius configuration. What's more ,the pptp with my radius works fine, only the xl2tpd failes. Anyone can help me? Thanks. -- Best regards,

1 1