- Freeradius-Users - lists.freeradius.org

Beginner need help
by Frank Wei 22 Sep '14

22 Sep '14

Hi, I'm brand new to FreeRadius and just installed server 2.2.5. I have followed the wiki instruction (basic Configuration section) to do the simple test. The only thing I added is to add Testing Cleartext-Password := "password" in the /raddb/users Here is the debug information I had when I run Radtesting testing password localhost 0 testing123 rad_recv: Access-Request packet from host 127.0.0.1 port 32775, id=195, length=77 User-Name = "testing" User-Password = "password" NAS-IP-Address = 127.0.0.1 NAS-Port = 10 Message-Authenticator = 0x024f3a845461e5597651150741f365fd # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] No '@' in User-Name = "testing", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] = noop [eap] No EAP-Message, not doing EAP ++[eap] = noop ++[files] = noop ++[expiration] = noop ++[logintime] = noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] = noop +} # group authorize = ok ERROR: No authenticate method (Auth-Type) found for the request: Rejecting the user Failed to authenticate the user. Using Post-Auth-Type REJECT # Executing group from file /usr/local/etc/raddb/sites-enabled/default +group REJECT { [attr_filter.access_reject] expand: %{User-Name} -> testing attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] = updated +} # group REJECT = updated Delaying reject of request 2 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 2 Sending Access-Reject of id 195 to 127.0.0.1 port 32775 Waking up in 4.9 seconds. Cleaning up request 2 ID 195 with timestamp +530 Could anybody help to me to explain why it was rejected? (it looks like a no "known good" password issue but I don't know why) Great thanks, 4RF Limited The information in this email communication (inclusive of attachments) is confidential to 4RF Limited and the intended recipient(s). If you are not the intended recipient(s), please note that any use, disclosure, distribution or copying of this information or any part thereof is strictly prohibited and that the author accepts no liability for the consequences of any action taken on the basis of the information provided. If you have received this email in error, please notify the sender immediately by return email and then delete all instances of this email from your system. 4RF Limited will not accept responsibility for any consequences associated with the use of this email (including, but not limited to, damages sustained as a result of any viruses and/or any action or lack of action taken in reliance on it).

4 11

Re: Beginner need help
by A.L.M.Buxey＠lboro.ac.uk 22 Sep '14

22 Sep '14

Hi, > I am very new to freeradius. On running radiusd -X I get "radiusd: Cannot > get ID for group radiusd: No such file or directory" > Can you please suggest how to resolve this. not a freeradius question - this is unix 101 - your config says to run the server as user radiusd and group radiusd - but your OS hasnt got that group defined. check eg /etc/group file and make the required change alan

1 0

Re: Beginner need help (Himanshu Pandey)
by KAVYA PRABHAKAR 22 Sep '14

22 Sep '14

Hi, I am beginner. I installed Freeradius in my windows PC. With default configuration it works as expected. Now I have a RADIUS client which will send request to server and I want server to authenticate the same. I should be changing users.conf raduser User-Password == "Password" where User-name = "raduser" and Password = "Password" I will have to change clients.conf as well. client <ipaddr/mask>{ secret = secret shortname = client name # what is the significance of shortname } In radiusd.conf, I have changed to which Ip and port RADIUS server has to listen to. (optional) After doing respective changes, I will execute following command: radtest raduser Password 10.253.6.11 1812 Password The result is as follows: C:\FreeRADIUS.net\bin>radclient.exe -d ..\etc\raddb -f radtest.txt -x -s 127.1 au th testing123 Sending Access-Request of id 108 to 127.0.0.1 port 1812 User-Name = "testuser" User-Password = "testpw" NAS-IP-Address = 127.0.0.1 NAS-Port = 123 rad_recv: Access-Accept packet from host 127.0.0.1:1812, id=108, length=20 Total approved auths: 1 Total denied auths: 0 Total lost auths: 0 Here I would like to know why am I getting reply from 127.0.0.1 when I have explicitly asked to receive from 10.253.6.11 PFA the debug log. Thanks in advance, Kavya

3 2

Re: Beginner need help
by Himanshu Pandey 22 Sep '14

22 Sep '14

Hi, I am very new to freeradius. On running radiusd -X I get "radiusd: Cannot get ID for group radiusd: No such file or directory" Can you please suggest how to resolve this. Regards,Sonu From: Frank Wei <Frank.Wei(a)4rf.com> Sent: Mon, 22 Sep 2014 05:35:26 To: "'FreeRadius users mailing list'" <freeradius-users(a)lists.freeradius.org> Subject: Re: Beginner need help Hi, I've downloaded "freeradius-client-1.1.6.tar.bz2" and untarted. Then I tried to installed as following: ./configure Make install Now I want to test this client (I have already installed freeradius server on the same LINUX PC and this server proved to be working). The only useful information on the freeradius client is radiusclient [-f config_file] [-p nas_port] [-s | [-a] a1=v1 [a2=v2[...[aN=vN]...]]] Not how to use above to test the client. How can I create the "config_file" ? Best Regards, Frank -----Original Message----- From: freeradius-users-bounces+frank.wei=4rf.com(a)lists.freeradius.org [mailto:freeradius-users-bounces+frank.wei=4rf.com@lists.freeradius.org] On Behalf Of Frank Wei Sent: Tuesday, 9 September 2014 12:03 p.m. To: 'FreeRadius users mailing list' Subject: RE: Beginner need help Oh, Thanks! -----Original Message----- From: freeradius-users-bounces+frank.wei=4rf.com(a)lists.freeradius.org [mailto:freeradius-users-bounces+frank.wei=4rf.com@lists.freeradius.org] On Behalf Of A.L.M.Buxey(a)lboro.ac.uk Sent: Tuesday, 9 September 2014 11:07 a.m. To: FreeRadius users mailing list Subject: Re: Beginner need help Hi, > The users file I edited is in etc/raddb. testing Cleartext-Password := "password" which etc/raddb ? the one in the source tree or the one that got installed? do you have multiple copies of freeradius installed? read the radiusd -X  debug putput to see which users file it is editing, then edit that file also, after editing the file you need to restart the server or your changes wont be picked up alan - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html The information in this email communication (inclusive of attachments) is confidential to 4RF Limited and the intended recipient(s). If you are not the intended recipient(s), please note that any use, disclosure, distribution or copying of this information or any part thereof is strictly prohibited and that the author accepts no liability for the consequences of any action taken on the basis of the information provided. If you have received this email in error, please notify the sender immediately by return email and then delete all instances of this email from your system. 4RF Limited will not accept responsibility for any consequences associated with the use of this email (including, but not limited to, damages sustained as a result of any viruses and/or any action or lack of action taken in reliance on it). - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html The information in this email communication (inclusive of attachments) is confidential to 4RF Limited and the intended recipient(s). If you are not the intended recipient(s), please note that any use, disclosure, distribution or copying of this information or any part thereof is strictly prohibited and that the author accepts no liability for the consequences of any action taken on the basis of the information provided. If you have received this email in error, please notify the sender immediately by return email and then delete all instances of this email from your system. 4RF Limited will not accept responsibility for any consequences associated with the use of this email (including, but not limited to, damages sustained as a result of any viruses and/or any action or lack of action taken in reliance on it). - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

1 0

Re: Freeradius unable to configure with Kerberos on RHEL 5.5
by Uzee 21 Sep '14

21 Sep '14

Tried adding the kerberos realm to proxy.conf realm section.... still no luck. On Wednesday, September 17, 2014 2:24 PM, Uzee <uzee007(a)yahoo.com> wrote: Hi, I inherited freeradius 1.1.3 on RHEL 5.5 working with our kerberos and first tried to understand how it was setup but looking at the freeradius site and docs I decided that I should really upgrade. Removed freeradius, installed via yum: freeradius2-2.1.12-5.el5, freeradius2-utils-2.1.12-5.el5, freeradius2-krb5-2.1.12-5.el5 Followed http://lists.freeradius.org/pipermail/freeradius-users/2012-December/064375… and was able to do a localhost radtest successfully using my actual username and password, which confirmed to me that radius was authenticating correctly via our kerberos server. However when I try with an actual wireless network, it doesn't work. I've also looked at https://www.eduroam.us/node/45 and tried to follow that except for the proxy stuff, I'm not sure if that is needed. Here are my configs: /etc/raddb/modules/krb5: krb5 { keytab = /etc/krb5.keytab service_principal = myserver/myserver.domain } Added kerberos after pap in /etc/raddb/sites-available/default: authenticate { # # PAP authentication, when a back-end database listed # in the 'authorize' section supplies a password. The # password can be clear-text, or encrypted. Auth-Type PAP { pap } # # Kerberos stuff Auth-Type Kerberos { krb5 } Similarly added kerberos in /etc/raddb/sites-available/inner-tunnel: authenticate { # # PAP authentication, when a back-end database listed # in the 'authorize' section supplies a password. The # password can be clear-text, or encrypted. Auth-Type PAP { pap } # Kerberos stuff Auth-Type Kerberos { krb5 } Modified eap.conf to: default_eap_type = ttls copy_request_to_tunnel = yes use_tunneled_reply = yes Added as first entry to users file: DEFAULT Auth-Type = Kerberos Fall-Through = 1 Added our Aruba controller to clients.conf: client ARUBA { ipaddr = x.x.x.x secret = mysecret shortname = myssid } Ran radiusd -xxx, here's the log: Wed Sep 17 04:29:25 2014 : Debug: Re-wait 4 Wed Sep 17 04:29:25 2014 : Debug: Re-wait 3 Wed Sep 17 04:29:25 2014 : Debug: Listening on authentication address * port 1812 Wed Sep 17 04:29:25 2014 : Debug: Listening on accounting address * port 1813 Wed Sep 17 04:29:25 2014 : Debug: Listening on command file /var/run/radiusd/radiusd.sock Wed Sep 17 04:29:25 2014 : Debug: Listening on authentication address 127.0.0.1 port 18120 as server inner-tunnel Wed Sep 17 04:29:25 2014 : Debug: Listening on proxy address * port 1814 Wed Sep 17 04:29:25 2014 : Info: Ready to process requests. Wed Sep 17 04:29:25 2014 : Debug: Re-wait 2 Wed Sep 17 04:30:19 2014 : Debug: Threads: total/active/spare threads = 5/0/5 Wed Sep 17 04:30:19 2014 : Debug: Waking up in 0.9 seconds. Wed Sep 17 04:30:19 2014 : Debug: Thread 1 got semaphore Wed Sep 17 04:30:19 2014 : Debug: Thread 1 handling request 0, (1 handled so far) Wed Sep 17 04:30:19 2014 : Info: [<thread>] # Executing section authorize from file /etc/raddb/sites-enabled/default Wed Sep 17 04:30:19 2014 : Info: [<thread>] +- entering group authorize {...} Wed Sep 17 04:30:19 2014 : Info: ++[preprocess] returns ok Wed Sep 17 04:30:19 2014 : Info: ++[chap] returns noop Wed Sep 17 04:30:19 2014 : Info: ++[mschap] returns noop Wed Sep 17 04:30:19 2014 : Info: ++[digest] returns noop Wed Sep 17 04:30:19 2014 : Info: [suffix] No '@' in User-Name = "xxxxx", looking up realm NULL Wed Sep 17 04:30:19 2014 : Info: [suffix] No such realm "NULL" Wed Sep 17 04:30:19 2014 : Info: ++[suffix] returns noop Wed Sep 17 04:30:19 2014 : Info: [eap] EAP packet type response id 1 length 11 Wed Sep 17 04:30:19 2014 : Info: [eap] No EAP Start, assuming it's an on-going EAP conversation Wed Sep 17 04:30:19 2014 : Info: ++[eap] returns updated Wed Sep 17 04:30:19 2014 : Info: [files] users: Matched entry DEFAULT at line 143 Wed Sep 17 04:30:19 2014 : Info: ++[files] returns ok Wed Sep 17 04:30:19 2014 : Info: ++[expiration] returns noop Wed Sep 17 04:30:19 2014 : Info: ++[logintime] returns noop Wed Sep 17 04:30:19 2014 : Info: [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. Wed Sep 17 04:30:19 2014 : Info: ++[pap] returns noop Wed Sep 17 04:30:19 2014 : Info: Found Auth-Type = EAP Wed Sep 17 04:30:19 2014 : Info: # Executing group from file /etc/raddb/sites-enabled/default Wed Sep 17 04:30:19 2014 : Info: +- entering group authenticate {...} Wed Sep 17 04:30:19 2014 : Info: [eap] EAP Identity Wed Sep 17 04:30:19 2014 : Info: [eap] processing type tls Wed Sep 17 04:30:19 2014 : Info: [tls] Initiate Wed Sep 17 04:30:19 2014 : Info: [tls] Start returned 1 Wed Sep 17 04:30:19 2014 : Info: ++[eap] returns handled Wed Sep 17 04:30:19 2014 : Info: Finished request 0. Wed Sep 17 04:30:19 2014 : Debug: Going to the next request Wed Sep 17 04:30:19 2014 : Debug: Thread 1 waiting to be assigned a request Wed Sep 17 04:30:19 2014 : Debug: Waking up in 0.9 seconds. Wed Sep 17 04:30:19 2014 : Debug: Thread 5 got semaphore Wed Sep 17 04:30:19 2014 : Debug: Thread 5 handling request 1, (1 handled so far) Wed Sep 17 04:30:19 2014 : Info: [<thread>] # Executing section authorize from file /etc/raddb/sites-enabled/default Wed Sep 17 04:30:19 2014 : Info: [<thread>] +- entering group authorize {...} Wed Sep 17 04:30:19 2014 : Info: ++[preprocess] returns ok Wed Sep 17 04:30:19 2014 : Info: ++[chap] returns noop Wed Sep 17 04:30:19 2014 : Info: ++[mschap] returns noop Wed Sep 17 04:30:19 2014 : Info: ++[digest] returns noop Wed Sep 17 04:30:19 2014 : Info: [suffix] No '@' in User-Name = "xxxx", looking up realm NULL Wed Sep 17 04:30:19 2014 : Info: [suffix] No such realm "NULL" Wed Sep 17 04:30:19 2014 : Info: ++[suffix] returns noop Wed Sep 17 04:30:19 2014 : Info: [eap] EAP packet type response id 2 length 166 Wed Sep 17 04:30:19 2014 : Info: [eap] Continuing tunnel setup. Wed Sep 17 04:30:19 2014 : Info: ++[eap] returns ok Wed Sep 17 04:30:19 2014 : Info: Found Auth-Type = EAP Wed Sep 17 04:30:19 2014 : Info: # Executing group from file /etc/raddb/sites-enabled/default Wed Sep 17 04:30:19 2014 : Info: +- entering group authenticate {...} Wed Sep 17 04:30:19 2014 : Info: [eap] Request found, released from the list Wed Sep 17 04:30:19 2014 : Info: [eap] EAP/ttls Wed Sep 17 04:30:19 2014 : Info: [eap] processing type ttls Wed Sep 17 04:30:19 2014 : Info: [ttls] Authenticate Wed Sep 17 04:30:19 2014 : Info: [ttls] processing EAP-TLS Wed Sep 17 04:30:19 2014 : Debug: TLS Length 156 Wed Sep 17 04:30:19 2014 : Info: [ttls] Length Included Wed Sep 17 04:30:19 2014 : Info: [ttls] eaptls_verify returned 11 Wed Sep 17 04:30:19 2014 : Info: [ttls] (other): before/accept initialization Wed Sep 17 04:30:19 2014 : Info: [ttls] TLS_accept: before/accept initialization Wed Sep 17 04:30:19 2014 : Info: [ttls] <<< TLS 1.0 Handshake [length 0097], ClientHello Wed Sep 17 04:30:19 2014 : Info: [ttls] TLS_accept: SSLv3 read client hello A Wed Sep 17 04:30:19 2014 : Info: [ttls] >>> TLS 1.0 Handshake [length 0031], ServerHello Wed Sep 17 04:30:19 2014 : Info: [ttls] TLS_accept: SSLv3 write server hello A Wed Sep 17 04:30:19 2014 : Info: [ttls] >>> TLS 1.0 Handshake [length 085e], Certificate Wed Sep 17 04:30:19 2014 : Info: [ttls] TLS_accept: SSLv3 write certificate A Wed Sep 17 04:30:19 2014 : Info: [ttls] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone Wed Sep 17 04:30:19 2014 : Info: [ttls] TLS_accept: SSLv3 write server done A Wed Sep 17 04:30:19 2014 : Info: [ttls] TLS_accept: SSLv3 flush data Wed Sep 17 04:30:19 2014 : Info: [ttls] TLS_accept: Need to read more data: SSLv3 read client certificate A Wed Sep 17 04:30:19 2014 : Debug: In SSL Handshake Phase Wed Sep 17 04:30:19 2014 : Debug: In SSL Accept mode Wed Sep 17 04:30:19 2014 : Info: [ttls] eaptls_process returned 13 Wed Sep 17 04:30:19 2014 : Info: ++[eap] returns handled Wed Sep 17 04:30:19 2014 : Info: Finished request 1. Wed Sep 17 04:30:19 2014 : Debug: Going to the next request Wed Sep 17 04:30:19 2014 : Debug: Thread 5 waiting to be assigned a request Wed Sep 17 04:30:19 2014 : Debug: Waking up in 0.9 seconds. Wed Sep 17 04:30:19 2014 : Debug: Thread 4 got semaphore Wed Sep 17 04:30:19 2014 : Debug: Thread 4 handling request 2, (1 handled so far) Wed Sep 17 04:30:19 2014 : Info: [<thread>] # Executing section authorize from file /etc/raddb/sites-enabled/default Wed Sep 17 04:30:19 2014 : Info: [<thread>] +- entering group authorize {...} Wed Sep 17 04:30:19 2014 : Info: ++[preprocess] returns ok Wed Sep 17 04:30:19 2014 : Info: ++[chap] returns noop Wed Sep 17 04:30:19 2014 : Info: ++[mschap] returns noop Wed Sep 17 04:30:19 2014 : Info: ++[digest] returns noop Wed Sep 17 04:30:19 2014 : Info: [suffix] No '@' in User-Name = "xxxx", looking up realm NULL Wed Sep 17 04:30:19 2014 : Info: [suffix] No such realm "NULL" Wed Sep 17 04:30:19 2014 : Info: ++[suffix] returns noop Wed Sep 17 04:30:19 2014 : Info: [eap] EAP packet type response id 3 length 6 Wed Sep 17 04:30:19 2014 : Info: [eap] Continuing tunnel setup. Wed Sep 17 04:30:19 2014 : Info: ++[eap] returns ok Wed Sep 17 04:30:19 2014 : Info: Found Auth-Type = EAP Wed Sep 17 04:30:19 2014 : Info: # Executing group from file /etc/raddb/sites-enabled/default Wed Sep 17 04:30:19 2014 : Info: +- entering group authenticate {...} Wed Sep 17 04:30:19 2014 : Info: [eap] Request found, released from the list Wed Sep 17 04:30:19 2014 : Info: [eap] EAP/ttls Wed Sep 17 04:30:19 2014 : Info: [eap] processing type ttls Wed Sep 17 04:30:19 2014 : Info: [ttls] Authenticate Wed Sep 17 04:30:19 2014 : Info: [ttls] processing EAP-TLS Wed Sep 17 04:30:19 2014 : Info: [ttls] Received TLS ACK Wed Sep 17 04:30:19 2014 : Info: [ttls] ACK handshake fragment handler Wed Sep 17 04:30:19 2014 : Info: [ttls] eaptls_verify returned 1 Wed Sep 17 04:30:19 2014 : Info: [ttls] eaptls_process returned 13 Wed Sep 17 04:30:19 2014 : Info: ++[eap] returns handled Wed Sep 17 04:30:19 2014 : Info: Finished request 2. Wed Sep 17 04:30:19 2014 : Debug: Going to the next request Wed Sep 17 04:30:19 2014 : Debug: Thread 4 waiting to be assigned a request Wed Sep 17 04:30:19 2014 : Debug: Waking up in 0.9 seconds. Wed Sep 17 04:30:19 2014 : Debug: Thread 3 got semaphore Wed Sep 17 04:30:19 2014 : Debug: Thread 3 handling request 3, (1 handled so far) Wed Sep 17 04:30:19 2014 : Info: [<thread>] # Executing section authorize from file /etc/raddb/sites-enabled/default Wed Sep 17 04:30:19 2014 : Info: [<thread>] +- entering group authorize {...} Wed Sep 17 04:30:19 2014 : Info: ++[preprocess] returns ok Wed Sep 17 04:30:19 2014 : Info: ++[chap] returns noop Wed Sep 17 04:30:19 2014 : Info: ++[mschap] returns noop Wed Sep 17 04:30:19 2014 : Info: ++[digest] returns noop Wed Sep 17 04:30:19 2014 : Info: [suffix] No '@' in User-Name = "xxxx", looking up realm NULL Wed Sep 17 04:30:19 2014 : Info: [suffix] No such realm "NULL" Wed Sep 17 04:30:19 2014 : Info: ++[suffix] returns noop Wed Sep 17 04:30:19 2014 : Info: [eap] EAP packet type response id 4 length 6 Wed Sep 17 04:30:19 2014 : Info: [eap] Continuing tunnel setup. Wed Sep 17 04:30:19 2014 : Info: ++[eap] returns ok Wed Sep 17 04:30:19 2014 : Info: Found Auth-Type = EAP Wed Sep 17 04:30:19 2014 : Info: # Executing group from file /etc/raddb/sites-enabled/default Wed Sep 17 04:30:19 2014 : Info: +- entering group authenticate {...} Wed Sep 17 04:30:19 2014 : Info: [eap] Request found, released from the list Wed Sep 17 04:30:19 2014 : Info: [eap] EAP/ttls Wed Sep 17 04:30:19 2014 : Info: [eap] processing type ttls Wed Sep 17 04:30:19 2014 : Info: [ttls] Authenticate Wed Sep 17 04:30:19 2014 : Info: [ttls] processing EAP-TLS Wed Sep 17 04:30:19 2014 : Info: [ttls] Received TLS ACK Wed Sep 17 04:30:19 2014 : Info: [ttls] ACK handshake fragment handler Wed Sep 17 04:30:19 2014 : Info: [ttls] eaptls_verify returned 1 Wed Sep 17 04:30:19 2014 : Info: [ttls] eaptls_process returned 13 Wed Sep 17 04:30:19 2014 : Info: ++[eap] returns handled Wed Sep 17 04:30:19 2014 : Info: Finished request 3. Wed Sep 17 04:30:19 2014 : Debug: Going to the next request Wed Sep 17 04:30:19 2014 : Debug: Thread 3 waiting to be assigned a request Wed Sep 17 04:30:19 2014 : Debug: Waking up in 0.9 seconds. Wed Sep 17 04:30:19 2014 : Debug: Thread 2 got semaphore Wed Sep 17 04:30:19 2014 : Debug: Thread 2 handling request 4, (1 handled so far) Wed Sep 17 04:30:19 2014 : Info: [<thread>] # Executing section authorize from file /etc/raddb/sites-enabled/default Wed Sep 17 04:30:19 2014 : Info: [<thread>] +- entering group authorize {...} Wed Sep 17 04:30:19 2014 : Info: ++[preprocess] returns ok Wed Sep 17 04:30:19 2014 : Info: ++[chap] returns noop Wed Sep 17 04:30:19 2014 : Info: ++[mschap] returns noop Wed Sep 17 04:30:19 2014 : Info: ++[digest] returns noop Wed Sep 17 04:30:19 2014 : Info: [suffix] No '@' in User-Name = "xxxx", looking up realm NULL Wed Sep 17 04:30:19 2014 : Info: [suffix] No such realm "NULL" Wed Sep 17 04:30:19 2014 : Info: ++[suffix] returns noop Wed Sep 17 04:30:19 2014 : Info: [eap] EAP packet type response id 5 length 253 Wed Sep 17 04:30:19 2014 : Info: [eap] Continuing tunnel setup. Wed Sep 17 04:30:19 2014 : Info: ++[eap] returns ok Wed Sep 17 04:30:19 2014 : Info: Found Auth-Type = EAP Wed Sep 17 04:30:19 2014 : Info: # Executing group from file /etc/raddb/sites-enabled/default Wed Sep 17 04:30:19 2014 : Info: +- entering group authenticate {...} Wed Sep 17 04:30:19 2014 : Info: [eap] Request found, released from the list Wed Sep 17 04:30:19 2014 : Info: [eap] EAP/ttls Wed Sep 17 04:30:19 2014 : Info: [eap] processing type ttls Wed Sep 17 04:30:19 2014 : Info: [ttls] Authenticate Wed Sep 17 04:30:19 2014 : Info: [ttls] processing EAP-TLS Wed Sep 17 04:30:19 2014 : Debug: TLS Length 326 Wed Sep 17 04:30:19 2014 : Info: [ttls] Length Included Wed Sep 17 04:30:19 2014 : Info: [ttls] eaptls_verify returned 11 Wed Sep 17 04:30:19 2014 : Info: [ttls] <<< TLS 1.0 Handshake [length 0106], ClientKeyExchange Wed Sep 17 04:30:19 2014 : Info: [ttls] TLS_accept: SSLv3 read client key exchange A Wed Sep 17 04:30:19 2014 : Info: [ttls] <<< TLS 1.0 ChangeCipherSpec [length 0001] Wed Sep 17 04:30:19 2014 : Info: [ttls] <<< TLS 1.0 Handshake [length 0010], Finished Wed Sep 17 04:30:19 2014 : Info: [ttls] TLS_accept: SSLv3 read finished A Wed Sep 17 04:30:19 2014 : Info: [ttls] >>> TLS 1.0 ChangeCipherSpec [length 0001] Wed Sep 17 04:30:19 2014 : Info: [ttls] TLS_accept: SSLv3 write change cipher spec A Wed Sep 17 04:30:19 2014 : Info: [ttls] >>> TLS 1.0 Handshake [length 0010], Finished Wed Sep 17 04:30:19 2014 : Info: [ttls] TLS_accept: SSLv3 write finished A Wed Sep 17 04:30:19 2014 : Info: [ttls] TLS_accept: SSLv3 flush data Wed Sep 17 04:30:19 2014 : Info: [ttls] (other): SSL negotiation finished successfully Wed Sep 17 04:30:19 2014 : Debug: SSL Connection Established Wed Sep 17 04:30:19 2014 : Info: [ttls] eaptls_process returned 13 Wed Sep 17 04:30:19 2014 : Info: ++[eap] returns handled Wed Sep 17 04:30:19 2014 : Info: Finished request 4. Wed Sep 17 04:30:19 2014 : Debug: Going to the next request Wed Sep 17 04:30:19 2014 : Debug: Thread 2 waiting to be assigned a request Wed Sep 17 04:30:19 2014 : Debug: Waking up in 0.8 seconds. Wed Sep 17 04:30:19 2014 : Debug: Thread 1 got semaphore Wed Sep 17 04:30:19 2014 : Debug: Thread 1 handling request 5, (2 handled so far) Wed Sep 17 04:30:19 2014 : Info: [<thread>] # Executing section authorize from file /etc/raddb/sites-enabled/default Wed Sep 17 04:30:19 2014 : Info: [<thread>] +- entering group authorize {...} Wed Sep 17 04:30:19 2014 : Info: ++[preprocess] returns ok Wed Sep 17 04:30:19 2014 : Info: ++[chap] returns noop Wed Sep 17 04:30:19 2014 : Info: ++[mschap] returns noop Wed Sep 17 04:30:19 2014 : Info: ++[digest] returns noop Wed Sep 17 04:30:19 2014 : Info: [suffix] No '@' in User-Name = "xxxx", looking up realm NULL Wed Sep 17 04:30:19 2014 : Info: [suffix] No such realm "NULL" Wed Sep 17 04:30:19 2014 : Info: ++[suffix] returns noop Wed Sep 17 04:30:19 2014 : Info: [eap] EAP packet type response id 6 length 159 Wed Sep 17 04:30:19 2014 : Info: [eap] Continuing tunnel setup. Wed Sep 17 04:30:19 2014 : Info: ++[eap] returns ok Wed Sep 17 04:30:19 2014 : Info: Found Auth-Type = EAP Wed Sep 17 04:30:19 2014 : Info: # Executing group from file /etc/raddb/sites-enabled/default Wed Sep 17 04:30:19 2014 : Info: +- entering group authenticate {...} Wed Sep 17 04:30:19 2014 : Info: [eap] Request found, released from the list Wed Sep 17 04:30:19 2014 : Info: [eap] EAP/ttls Wed Sep 17 04:30:19 2014 : Info: [eap] processing type ttls Wed Sep 17 04:30:19 2014 : Info: [ttls] Authenticate Wed Sep 17 04:30:19 2014 : Info: [ttls] processing EAP-TLS Wed Sep 17 04:30:19 2014 : Debug: TLS Length 149 Wed Sep 17 04:30:19 2014 : Info: [ttls] Length Included Wed Sep 17 04:30:19 2014 : Info: [ttls] eaptls_verify returned 11 Wed Sep 17 04:30:19 2014 : Info: [ttls] eaptls_process returned 7 Wed Sep 17 04:30:19 2014 : Info: [ttls] Session established. Proceeding to decode tunneled attributes. Wed Sep 17 04:30:19 2014 : Info: # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel Wed Sep 17 04:30:19 2014 : Info: +- entering group authorize {...} Wed Sep 17 04:30:19 2014 : Info: ++[chap] returns noop Wed Sep 17 04:30:19 2014 : Info: [mschap] Found MS-CHAP attributes. Setting 'Auth-Type = mschap' Wed Sep 17 04:30:19 2014 : Info: ++[mschap] returns ok Wed Sep 17 04:30:19 2014 : Info: [suffix] No '@' in User-Name = "xxxx", looking up realm NULL Wed Sep 17 04:30:19 2014 : Info: [suffix] No such realm "NULL" Wed Sep 17 04:30:19 2014 : Info: ++[suffix] returns noop Wed Sep 17 04:30:19 2014 : Info: ++[control] returns noop Wed Sep 17 04:30:19 2014 : Info: [eap] No EAP-Message, not doing EAP Wed Sep 17 04:30:19 2014 : Info: ++[eap] returns noop Wed Sep 17 04:30:19 2014 : Info: [files] users: Matched entry DEFAULT at line 143 Wed Sep 17 04:30:19 2014 : Info: ++[files] returns ok Wed Sep 17 04:30:19 2014 : Info: ++[expiration] returns noop Wed Sep 17 04:30:19 2014 : Info: ++[logintime] returns noop Wed Sep 17 04:30:19 2014 : Info: ++[pap] returns noop Wed Sep 17 04:30:19 2014 : Info: Found Auth-Type = MSCHAP Wed Sep 17 04:30:19 2014 : Info: # Executing group from file /etc/raddb/sites-enabled/inner-tunnel Wed Sep 17 04:30:19 2014 : Info: +- entering group MS-CHAP {...} Wed Sep 17 04:30:19 2014 : Info: [mschap] No Cleartext-Password configured. Cannot create LM-Password. Wed Sep 17 04:30:19 2014 : Info: [mschap] No Cleartext-Password configured. Cannot create NT-Password. Wed Sep 17 04:30:19 2014 : Info: [mschap] Creating challenge hash with username: xxxx Wed Sep 17 04:30:19 2014 : Info: [mschap] Told to do MS-CHAPv2 for xxxx with NT-Password Wed Sep 17 04:30:19 2014 : Info: [mschap] FAILED: No NT/LM-Password. Cannot perform authentication. Wed Sep 17 04:30:19 2014 : Info: [mschap] FAILED: MS-CHAP2-Response is incorrect Wed Sep 17 04:30:19 2014 : Info: ++[mschap] returns reject Wed Sep 17 04:30:19 2014 : Info: Failed to authenticate the user. Wed Sep 17 04:30:19 2014 : Info: [ttls] Got tunneled Access-Reject Wed Sep 17 04:30:19 2014 : Info: [eap] Handler failed in EAP/ttls Wed Sep 17 04:30:19 2014 : Info: [eap] Failed in EAP select Wed Sep 17 04:30:19 2014 : Info: ++[eap] returns invalid Wed Sep 17 04:30:19 2014 : Info: Failed to authenticate the user. Wed Sep 17 04:30:19 2014 : Info: Using Post-Auth-Type Reject Wed Sep 17 04:30:19 2014 : Info: # Executing group from file /etc/raddb/sites-enabled/default Wed Sep 17 04:30:19 2014 : Info: +- entering group REJECT {...} Wed Sep 17 04:30:19 2014 : Info: [attr_filter.access_reject] expand: %{User-Name} -> xxxx Wed Sep 17 04:30:19 2014 : Debug: attr_filter: Matched entry DEFAULT at line 11 Wed Sep 17 04:30:19 2014 : Info: ++[attr_filter.access_reject] returns updated Wed Sep 17 04:30:19 2014 : Info: Delaying reject of request 5 for 1 seconds Wed Sep 17 04:30:19 2014 : Debug: Going to the next request Wed Sep 17 04:30:19 2014 : Debug: Thread 1 waiting to be assigned a request Wed Sep 17 04:30:20 2014 : Info: Sending delayed reject for request 5 Wed Sep 17 04:30:20 2014 : Debug: Waking up in 3.8 seconds. Wed Sep 17 04:30:24 2014 : Info: Cleaning up request 0 ID 57 with timestamp +54 Wed Sep 17 04:30:24 2014 : Info: Cleaning up request 1 ID 58 with timestamp +54 Wed Sep 17 04:30:24 2014 : Info: Cleaning up request 2 ID 59 with timestamp +54 Wed Sep 17 04:30:24 2014 : Info: Cleaning up request 3 ID 60 with timestamp +54 Wed Sep 17 04:30:24 2014 : Info: Cleaning up request 4 ID 61 with timestamp +54 Wed Sep 17 04:30:24 2014 : Debug: Waking up in 1.0 seconds. Wed Sep 17 04:30:25 2014 : Info: Cleaning up request 5 ID 62 with timestamp +54 Wed Sep 17 04:30:25 2014 : Info: Ready to process requests. The wireless network is served from an Aruba controller which works fine with a windows radius server using AD authentication (for a diff SSID) I can't say that I have looked through the list messages entirely but have spent reasonable time looking at different threads and reading radius docs, if I have still missed something obvious I apologize in advance. Any help/suggestion/advice would be greatly appreciated. Thanks -uzee

1 2

Re: using userPassword instead sambaNTPassword
by Nicolás Guerra 21 Sep '14

21 Sep '14

thank you for you quick answer, between lines: > ------------------------------ > > Message: 4 > Date: Thu, 18 Sep 2014 12:46:27 -0400 > From: Alan DeKok <aland(a)deployingradius.com> > To: FreeRadius users mailing list > <freeradius-users(a)lists.freeradius.org> > Subject: Re: using userPassword instead sambaNTPassword > Message-ID: <541B0C63.1080105(a)deployingradius.com> > Content-Type: text/plain; charset=windows-1252 > > Nicolás Guerra wrote: >> this is the server log output: >> # radiusd -X > log.radius >> I don't understand what "**WARNING: No "known good" password was found >> in LDAP. Are you sure that *the **user is configured correctly?*" means? > It means that the server couldn't find userPassword or sambaNTPassword > for the user. Thats right! I didn't realised that userPassword field in the openLDAP server is restringed to authenticated users. so, I used my own credentials in /etc/raddb/modules/ldap file. the log changed, there's the new one. (I used my own credentials just for testing pruposes I'll change it) What I don't understand: I can read that "[ldap] user nicolas.guerra authorized to use remote access" but it continues evaluating things untill an error happen on request #8 with mschapv2 please forgive my ignorance, I'm new in freeRADIUS, I'm just trying to make it work as I'd been asked (users should authenticate with the userPassword attr). and forgive me for the long (log) response, I'm trying to do the best to help you helping me. I don't even know if I'm answering correctly to the mailing list, I can't see the thread.... What I saw is, I think is the error but I don't know what I should do with it... any help would be wellcome. in request #8: (extract) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/mschapv2 [eap] processing type mschapv2 [mschapv2] # Executing group from file /etc/raddb/sites-enabled/inner-tunnel [mschapv2] +- entering group MS-CHAP {...} [mschap] No Cleartext-Password configured. Cannot create LM-Password. [mschap] Found NT-Password [mschap] Creating challenge hash with username: nicolas.guerra [mschap] Client is using MS-CHAPv2 for nicolas.guerra, we need NT-Password [mschap] FAILED: MS-CHAP2-Response is incorrect ++[mschap] returns reject [eap] Freeing handler ++[eap] returns reject Failed to authenticate the user. Login incorrect: [nicolas.guerra] (from client owrt.router port 0 via TLS tunnel) } # server inner-tunnel [peap] Got tunneled reply code 3 MS-CHAP-Error = "\327E=691 R=1" EAP-Message = 0x04d70004 Message-Authenticator = 0x00000000000000000000000000000000 [peap] Got tunneled reply RADIUS code 3 MS-CHAP-Error = "\327E=691 R=1" EAP-Message = 0x04d70004 Message-Authenticator = 0x00000000000000000000000000000000 [peap] Tunneled authentication was rejected. [peap] FAILURE (finish-extract) I separated requests with a "-----------------------------------" line ... adding new socket proxy address * port 36330 Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on command file /var/run/radiusd/radiusd.sock Listening on authentication address 127.0.0.1 port 18120 as server inner-tunnel Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 10.202.10.93 port 60123, id=110, length=165 User-Name = "nicolas.guerra" Called-Station-Id = "A0-F3-C1-CF-E3-06:OpenWrt" NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Calling-Station-Id = "CC-FE-3C-92-E0-1B" Connect-Info = "CONNECT 54Mbps 802.11g" Framed-MTU = 1400 EAP-Message = 0x02cf0013016e69636f6c61732e677565727261 Message-Authenticator = 0xf3d2fdc1b2c7d8fd17426e83f12b3fbf # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "nicolas.guerra", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 207 length 19 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop [ldap] performing user authorization for nicolas.guerra [ldap] expand: (uid=%u) -> (uid=nicolas.guerra) [ldap] expand: ou=People,ou=Users,dc=asse -> ou=People,ou=Users,dc=asse [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] attempting LDAP reconnection [ldap] (re)connect to ldap:389, authentication 0 [ldap] bind as uid=nicolas.guerra,ou=People,ou=Users,dc=asse/agarra to ldap:389 [ldap] waiting for bind result ... [ldap] Bind was successful [ldap] performing search in ou=People,ou=Users,dc=asse, with filter (uid=nicolas.guerra) [ldap] No default NMAS login sequence [ldap] looking for check items in directory... [ldap] userPassword -> Password-With-Header == "{SHA}/XmlnVvg6a3Lq4Gi1PqEBrt55FU=" [ldap] sambaNtPassword -> NT-Password == 0x4130333335363744443336453645424439394331413531463437333434344345 [ldap] looking for reply items in directory... [ldap] user nicolas.guerra authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] Normalizing NT-Password from hex encoding [pap] Normalizing SHA1-Password from base64 encoding [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] EAP Identity [eap] processing type md5 rlm_eap_md5: Issuing Challenge ++[eap] returns handled Sending Access-Challenge of id 110 to 10.202.10.93 port 60123 EAP-Message = 0x01d0001604103d1e9b7ab042b7e6a265534b0045b9ff Message-Authenticator = 0x00000000000000000000000000000000 State = 0x758fc0dc755fc40d29544e3e28c8c2ba Finished request 0. ---------------------------------------------------------------------------------------------------- Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.202.10.93 port 60123, id=111, length=170 User-Name = "nicolas.guerra" Called-Station-Id = "A0-F3-C1-CF-E3-06:OpenWrt" NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Calling-Station-Id = "CC-FE-3C-92-E0-1B" Connect-Info = "CONNECT 54Mbps 802.11g" Framed-MTU = 1400 EAP-Message = 0x02d000060319 State = 0x758fc0dc755fc40d29544e3e28c8c2ba Message-Authenticator = 0xaa3caa5271fd0a1bc95449457b875d3c # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "nicolas.guerra", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 208 length 6 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop [ldap] performing user authorization for nicolas.guerra [ldap] expand: (uid=%u) -> (uid=nicolas.guerra) [ldap] expand: ou=People,ou=Users,dc=asse -> ou=People,ou=Users,dc=asse [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in ou=People,ou=Users,dc=asse, with filter (uid=nicolas.guerra) [ldap] No default NMAS login sequence [ldap] looking for check items in directory... [ldap] userPassword -> Password-With-Header == "{SHA}/XmlnVvg6a3Lq4Gi1PqEBrt55FU=" [ldap] sambaNtPassword -> NT-Password == 0x4130333335363744443336453645424439394331413531463437333434344345 [ldap] looking for reply items in directory... [ldap] user nicolas.guerra authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] Normalizing NT-Password from hex encoding [pap] Normalizing SHA1-Password from base64 encoding [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP NAK [eap] EAP-NAK asked for EAP-Type/peap [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 111 to 10.202.10.93 port 60123 EAP-Message = 0x01d100061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x758fc0dc745ed90d29544e3e28c8c2ba Finished request 1. ---------------------------------------------------------------------------------------------------- Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.202.10.93 port 60123, id=112, length=360 User-Name = "nicolas.guerra" Called-Station-Id = "A0-F3-C1-CF-E3-06:OpenWrt" NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Calling-Station-Id = "CC-FE-3C-92-E0-1B" Connect-Info = "CONNECT 54Mbps 802.11g" Framed-MTU = 1400 EAP-Message = 0x02d100c4190016030100b9010000b50301541c5f77f1fb5c2f403841c322cd32b8198da4dfb21658a7e643dc090cae8d8d000048c014c00a00390038c00fc0050035c012c00800160013c00dc003000ac013c00900330032c00ec004002fc011c007c00cc002000500040015001200090014001100080006000300ff01000044000b000403000102000a00340032000100020003000400050006000700080009000a000b000c000d000e000f001000110012001300140015001600170018001900230000 State = 0x758fc0dc745ed90d29544e3e28c8c2ba Message-Authenticator = 0x60dae326fc0a6efe3d5cc042ea835a8d # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "nicolas.guerra", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 209 length 196 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] (other): before/accept initialization [peap] TLS_accept: before/accept initialization [peap] <<< TLS 1.0 Handshake [length 00b9], ClientHello [peap] TLS_accept: SSLv3 read client hello A [peap] >>> TLS 1.0 Handshake [length 0039], ServerHello [peap] TLS_accept: SSLv3 write server hello A [peap] >>> TLS 1.0 Handshake [length 085e], Certificate [peap] TLS_accept: SSLv3 write certificate A [peap] >>> TLS 1.0 Handshake [length 014b], ServerKeyExchange [peap] TLS_accept: SSLv3 write key exchange A [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [peap] TLS_accept: SSLv3 write server done A [peap] TLS_accept: SSLv3 flush data [peap] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 112 to 10.202.10.93 port 60123 EAP-Message = 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 EAP-Message = 0x696361746520417574686f72697479301e170d3134303931363137323134315a170d3135303931363137323134315a307c310b3009060355040613024652310f300d06035504080c0652616469757331153013060355040a0c0c4578616d706c6520496e632e3123302106035504030c1a4578616d706c65205365727665722043657274696669636174653120301e06092a864886f70d010901161161646d696e406578616d706c652e636f6d30820122300d06092a864886f70d01010105000382010f003082010a0282010100afa13573b912b82fd8025f526ff2bc70b8371704e2510a26129eb3d54796df7f22d8bbc9ce0fb3448e014e29c1b20c EAP-Message = 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 EAP-Message = 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 EAP-Message = 0xd971ed8de12a89d46a0004ab Message-Authenticator = 0x00000000000000000000000000000000 State = 0x758fc0dc775dd90d29544e3e28c8c2ba Finished request 2. ---------------------------------------------------------------------------------------------------- Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.202.10.93 port 60123, id=113, length=170 User-Name = "nicolas.guerra" Called-Station-Id = "A0-F3-C1-CF-E3-06:OpenWrt" NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Calling-Station-Id = "CC-FE-3C-92-E0-1B" Connect-Info = "CONNECT 54Mbps 802.11g" Framed-MTU = 1400 EAP-Message = 0x02d200061900 State = 0x758fc0dc775dd90d29544e3e28c8c2ba Message-Authenticator = 0x6eae8c26c731b1ecabbbe332d4017abf # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "nicolas.guerra", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 210 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 113 to 10.202.10.93 port 60123 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x7eb7a01ad619cdc2 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x758fc0dc765cd90d29544e3e28c8c2ba Finished request 3. ---------------------------------------------------------------------------------------------------- Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.202.10.93 port 60123, id=114, length=170 User-Name = "nicolas.guerra" Called-Station-Id = "A0-F3-C1-CF-E3-06:OpenWrt" NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Calling-Station-Id = "CC-FE-3C-92-E0-1B" Connect-Info = "CONNECT 54Mbps 802.11g" Framed-MTU = 1400 EAP-Message = 0x02d300061900 State = 0x758fc0dc765cd90d29544e3e28c8c2ba Message-Authenticator = 0x23be58d15054ac08fbc61b9725de6196 # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "nicolas.guerra", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 211 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 114 to 10.202.10.93 port 60123 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0xba0100beda55de08992a0b3f1617cd467216030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x758fc0dc715bd90d29544e3e28c8c2ba Finished request 4. ---------------------------------------------------------------------------------------------------- Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.202.10.93 port 60123, id=115, length=304 User-Name = "nicolas.guerra" Called-Station-Id = "A0-F3-C1-CF-E3-06:OpenWrt" NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Calling-Station-Id = "CC-FE-3C-92-E0-1B" Connect-Info = "CONNECT 54Mbps 802.11g" Framed-MTU = 1400 EAP-Message = 0x02d4008c19001603010046100000424104220903dc432a650822abd314074ad4da1c8cd9a64ee5f3b1c4fd683f55123474ab0e75971961eb7dd9bf9d8fee9c7d229d1b7a8aaf878ccaeb1526f4fbbd7acb1403010001011603010030bb6cdd1b1f819aa774fe3c3a110d727b102165ea4f318531e59fe283012957463317b698ec19e7b17e60bd897c5aeb3b State = 0x758fc0dc715bd90d29544e3e28c8c2ba Message-Authenticator = 0xd51bf47ab1ffb51a8e51d3c979b85507 # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "nicolas.guerra", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 212 length 140 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] <<< TLS 1.0 Handshake [length 0046], ClientKeyExchange [peap] TLS_accept: SSLv3 read client key exchange A [peap] <<< TLS 1.0 ChangeCipherSpec [length 0001] [peap] <<< TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 read finished A [peap] >>> TLS 1.0 ChangeCipherSpec [length 0001] [peap] TLS_accept: SSLv3 write change cipher spec A [peap] >>> TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 write finished A [peap] TLS_accept: SSLv3 flush data [peap] (other): SSL negotiation finished successfully SSL Connection Established [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 115 to 10.202.10.93 port 60123 EAP-Message = 0x01d5004119001403010001011603010030eec36f8df623b996a242deb85e5d6e8cc399e042573d203f6ae8fde11180b72892593271bc6e78105e3dc2cb9b0623c8 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x758fc0dc705ad90d29544e3e28c8c2ba Finished request 5. ---------------------------------------------------------------------------------------------------- Going to the next request Waking up in 4.8 seconds. rad_recv: Access-Request packet from host 10.202.10.93 port 60123, id=116, length=170 User-Name = "nicolas.guerra" Called-Station-Id = "A0-F3-C1-CF-E3-06:OpenWrt" NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Calling-Station-Id = "CC-FE-3C-92-E0-1B" Connect-Info = "CONNECT 54Mbps 802.11g" Framed-MTU = 1400 EAP-Message = 0x02d500061900 State = 0x758fc0dc705ad90d29544e3e28c8c2ba Message-Authenticator = 0x55b03c926c5d2f691ef1c5eeee696692 # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "nicolas.guerra", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 213 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake is finished [peap] eaptls_verify returned 3 [peap] eaptls_process returned 3 [peap] EAPTLS_SUCCESS [peap] Session established. Decoding tunneled attributes. [peap] Peap state TUNNEL ESTABLISHED ++[eap] returns handled Sending Access-Challenge of id 116 to 10.202.10.93 port 60123 EAP-Message = 0x01d6002b19001703010020e66c65be4f4be8a88875791677fedac7ef1aa06f7bd92d2009530c41423bc599 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x758fc0dc7359d90d29544e3e28c8c2ba Finished request 6. ---------------------------------------------------------------------------------------------------- Going to the next request Waking up in 4.8 seconds. rad_recv: Access-Request packet from host 10.202.10.93 port 60123, id=117, length=260 User-Name = "nicolas.guerra" Called-Station-Id = "A0-F3-C1-CF-E3-06:OpenWrt" NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Calling-Station-Id = "CC-FE-3C-92-E0-1B" Connect-Info = "CONNECT 54Mbps 802.11g" Framed-MTU = 1400 EAP-Message = 0x02d600601900170301002027fb3b79542161d3bfc95b9f5f01bb8ed3bdad3872d0d0549416e4c93fe6c6661703010030adf8467bdc9f43ffd4a575132ca5cf02e5ced919f3db7f6847849ac56c12dbaf55e2da928d055270e5636cd1f7ddcc58 State = 0x758fc0dc7359d90d29544e3e28c8c2ba Message-Authenticator = 0x341fb223e4ead1c285adc542e876c37d # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "nicolas.guerra", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 214 length 96 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state WAITING FOR INNER IDENTITY [peap] Identity - nicolas.guerra [peap] Got inner identity 'nicolas.guerra' [peap] Setting default EAP type for tunneled EAP session. [peap] Got tunneled request EAP-Message = 0x02d60013016e69636f6c61732e677565727261 server { [peap] Setting User-Name to nicolas.guerra Sending tunneled request EAP-Message = 0x02d60013016e69636f6c61732e677565727261 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "nicolas.guerra" server inner-tunnel { # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "nicolas.guerra", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[control] returns noop [eap] EAP packet type response id 214 length 19 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop [ldap] performing user authorization for nicolas.guerra [ldap] expand: (uid=%u) -> (uid=nicolas.guerra) [ldap] expand: ou=People,ou=Users,dc=asse -> ou=People,ou=Users,dc=asse [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in ou=People,ou=Users,dc=asse, with filter (uid=nicolas.guerra) [ldap] No default NMAS login sequence [ldap] looking for check items in directory... [ldap] userPassword -> Password-With-Header == "{SHA}/XmlnVvg6a3Lq4Gi1PqEBrt55FU=" [ldap] sambaNtPassword -> NT-Password == 0x4130333335363744443336453645424439394331413531463437333434344345 [ldap] looking for reply items in directory... [ldap] user nicolas.guerra authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] Normalizing NT-Password from hex encoding [pap] Normalizing SHA1-Password from base64 encoding [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/inner-tunnel +- entering group authenticate {...} [eap] EAP Identity [eap] processing type mschapv2 rlm_eap_mschapv2: Issuing Challenge ++[eap] returns handled } # server inner-tunnel [peap] Got tunneled reply code 11 EAP-Message = 0x01d700281a01d7002310e86768d290336a6f6d694b29526dbdd16e69636f6c61732e677565727261 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x6ca01c286c7706e53c31e18b5384bf9d [peap] Got tunneled reply RADIUS code 11 EAP-Message = 0x01d700281a01d7002310e86768d290336a6f6d694b29526dbdd16e69636f6c61732e677565727261 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x6ca01c286c7706e53c31e18b5384bf9d [peap] Got tunneled Access-Challenge ++[eap] returns handled Sending Access-Challenge of id 117 to 10.202.10.93 port 60123 EAP-Message = 0x01d7004b19001703010040c71c581fbb0f992915f77a68e7135a7a993c67b553a8e0958ed5a7021f618190b0870a1b7d08dea450d503e6c73d72573cffd411e16ec14c5ba31a943debca9b Message-Authenticator = 0x00000000000000000000000000000000 State = 0x758fc0dc7258d90d29544e3e28c8c2ba Finished request 7. ---------------------------------------------------------------------------------------------------- Going to the next request Waking up in 4.8 seconds. rad_recv: Access-Request packet from host 10.202.10.93 port 60123, id=118, length=308 User-Name = "nicolas.guerra" Called-Station-Id = "A0-F3-C1-CF-E3-06:OpenWrt" NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Calling-Station-Id = "CC-FE-3C-92-E0-1B" Connect-Info = "CONNECT 54Mbps 802.11g" Framed-MTU = 1400 EAP-Message = 0x02d70090190017030100209835c1d89f49fdb76e75cd34277f212fc8cc278e367921ffa9478b42692eaf8e17030100604b96f15e88a6ba84c20147c1fe51666a8f9125627a13a1ac11f9ca77dc6396ebadd292f86f127d82ad3978a241e91dfc2481eb4f6ff3eb3384783187b96701664d911eda135737760c5a4b6deb23426f7cc911c0f60bed737c968e367f786d4a State = 0x758fc0dc7258d90d29544e3e28c8c2ba Message-Authenticator = 0x700e1dfd1e83b3facaee70a3186359cc # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "nicolas.guerra", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 215 length 144 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state phase2 [peap] EAP type mschapv2 [peap] Got tunneled request EAP-Message = 0x02d700491a02d70044311c19091f3449e4e03104da134036f30600000000000000008ab01c93903f478ea476adde1223019cbba6d2afc9839d98006e69636f6c61732e677565727261 server { [peap] Setting User-Name to nicolas.guerra Sending tunneled request EAP-Message = 0x02d700491a02d70044311c19091f3449e4e03104da134036f30600000000000000008ab01c93903f478ea476adde1223019cbba6d2afc9839d98006e69636f6c61732e677565727261 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "nicolas.guerra" State = 0x6ca01c286c7706e53c31e18b5384bf9d server inner-tunnel { # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "nicolas.guerra", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[control] returns noop [eap] EAP packet type response id 215 length 73 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop [ldap] performing user authorization for nicolas.guerra [ldap] expand: (uid=%u) -> (uid=nicolas.guerra) [ldap] expand: ou=People,ou=Users,dc=asse -> ou=People,ou=Users,dc=asse [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in ou=People,ou=Users,dc=asse, with filter (uid=nicolas.guerra) [ldap] No default NMAS login sequence [ldap] looking for check items in directory... [ldap] userPassword -> Password-With-Header == "{SHA}/XmlnVvg6a3Lq4Gi1PqEBrt55FU=" [ldap] sambaNtPassword -> NT-Password == 0x4130333335363744443336453645424439394331413531463437333434344345 [ldap] looking for reply items in directory... [ldap] user nicolas.guerra authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] Normalizing NT-Password from hex encoding [pap] Normalizing SHA1-Password from base64 encoding [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/inner-tunnel +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/mschapv2 [eap] processing type mschapv2 [mschapv2] # Executing group from file /etc/raddb/sites-enabled/inner-tunnel [mschapv2] +- entering group MS-CHAP {...} [mschap] No Cleartext-Password configured. Cannot create LM-Password. [mschap] Found NT-Password [mschap] Creating challenge hash with username: nicolas.guerra [mschap] Client is using MS-CHAPv2 for nicolas.guerra, we need NT-Password [mschap] FAILED: MS-CHAP2-Response is incorrect ++[mschap] returns reject [eap] Freeing handler ++[eap] returns reject Failed to authenticate the user. Login incorrect: [nicolas.guerra] (from client owrt.router port 0 via TLS tunnel) } # server inner-tunnel [peap] Got tunneled reply code 3 MS-CHAP-Error = "\327E=691 R=1" EAP-Message = 0x04d70004 Message-Authenticator = 0x00000000000000000000000000000000 [peap] Got tunneled reply RADIUS code 3 MS-CHAP-Error = "\327E=691 R=1" EAP-Message = 0x04d70004 Message-Authenticator = 0x00000000000000000000000000000000 [peap] Tunneled authentication was rejected. [peap] FAILURE ++[eap] returns handled Sending Access-Challenge of id 118 to 10.202.10.93 port 60123 EAP-Message = 0x01d8002b19001703010020d5506a188aabe243b4c5f1e81acdb4fabe9e3d06d055452811e01a36ce82ed11 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x758fc0dc7d57d90d29544e3e28c8c2ba Finished request 8. ---------------------------------------------------------------------------------------------------- Going to the next request Waking up in 4.7 seconds. rad_recv: Access-Request packet from host 10.202.10.93 port 60123, id=119, length=244 User-Name = "nicolas.guerra" Called-Station-Id = "A0-F3-C1-CF-E3-06:OpenWrt" NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Calling-Station-Id = "CC-FE-3C-92-E0-1B" Connect-Info = "CONNECT 54Mbps 802.11g" Framed-MTU = 1400 EAP-Message = 0x02d80050190017030100207fff7c342b74c4a5dde99e439121d0feceb470c7af0f3ea5fc9a66b018378ff31703010020dd29b9c76f0e0ef43897c9faa106195329ee837cefdcae0cd5fd3a02d0b2b4bf State = 0x758fc0dc7d57d90d29544e3e28c8c2ba Message-Authenticator = 0xfd4d513844b07230d93f9ea59d759116 # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "nicolas.guerra", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 216 length 80 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state send tlv failure [peap] Received EAP-TLV response. [peap] The users session was previously rejected: returning reject (again.) [peap] *** This means you need to read the PREVIOUS messages in the debug output [peap] *** to find out the reason why the user was rejected. [peap] *** Look for "reject" or "fail". Those earlier messages will tell you. [peap] *** what went wrong, and how to fix the problem. [eap] Handler failed in EAP/peap [eap] Failed in EAP select ++[eap] returns invalid Failed to authenticate the user. Login incorrect: [nicolas.guerra] (from client owrt.router port 1 cli CC-FE-3C-92-E0-1B) Using Post-Auth-Type REJECT # Executing group from file /etc/raddb/sites-enabled/default +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> nicolas.guerra attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 9 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 9 Sending Access-Reject of id 119 to 10.202.10.93 port 60123 EAP-Message = 0x04d80004 Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.7 seconds. Cleaning up request 0 ID 110 with timestamp +40 Cleaning up request 1 ID 111 with timestamp +40 Cleaning up request 2 ID 112 with timestamp +40 Cleaning up request 3 ID 113 with timestamp +40 Cleaning up request 4 ID 114 with timestamp +40 Cleaning up request 5 ID 115 with timestamp +40 Cleaning up request 6 ID 116 with timestamp +40 Cleaning up request 7 ID 117 with timestamp +40 Cleaning up request 8 ID 118 with timestamp +40 Waking up in 1.0 seconds. Cleaning up request 9 ID 119 with timestamp +40 Ready to process requests. >> and, why if I enter sambaNTPassword works fine? > No idea. > > Alan DeKok. > >

2 1

Re: help! Windows Phone8.1 access authentication failed
by Farrell Yang 20 Sep '14

20 Sep '14

As Herwin's suggestion, I modified my regular expression and it worked. WP8.1 clients can now be successfully authorized. Thanks for you guys' help. Of course, adding unlang in authorization part is not good method as the accounting part don't use the same username that authorization part uses. Maybe through the operation of ntdomain is better. And I don't want proxying while only deploying a local host. I'm newcomer in FR and don't know how to do it.

1 0

Filtering data based on date time.
by Rohit Chormale 20 Sep '14

20 Sep '14

Hi friends, I am trying to write script which filters data from freeradius mysql tables based on date time range. As freeradius uses rotating of mysql tables based on months, which is the best way to achieve this task? -- Thank You. Regards, Rohit Chormale 91-7416510165

1 0

Re: Radclient Queries
by Arran Cudbard-Bell 19 Sep '14

19 Sep '14

On 19 Sep 2014, at 08:20, Himanshu Pandey <pandey_himanshu80(a)rediffmail.com> wrote: > Dear Friends, > As suggested I went through the code of freeradius thoroughly and developed a reasonable understanding of the same. Now I want to do a practical exercise: > Using radclient I want to create and send a dummy request to user module in order to take it's statistics. > I would like to store username & password in a file. > Please tell me what all steps do I have to perform in order to test the above scenario. Meaning which all files do I have to modify and how to perform the testing. > Thanks in advance. No. Stop being lazy. man radclient -Arran Arran Cudbard-Bell <a.cudbardb(a)freeradius.org> FreeRADIUS development team FD31 3077 42EC 7FCD 32FE 5EE2 56CF 27F9 30A8 CAA2

1 0

Cannot find the sql.conf on FreeRadius 3.0.4 version!
by Haviaras Kostas 19 Sep '14

19 Sep '14

Hello everyone, I am complete new in the FreeRadius Server and I can't find the sql.conf on the raddb folder, to make the changes! Thanks for your attention and time!

2 1