- Freeradius-Users - lists.freeradius.org

The service automatically stops and cannot be started
by Smiler 06 Jan '23

06 Jan '23

Good day  Freeraius service auto stops and cannot be started. the following is the log record, please help to check. #systemctl status freeradius.service freeradius.service - FreeRADIUS multi-protocol policy server   Loaded: loaded (/lib/systemd/system/freeradius.service; disabled; vendor preset: enabled)    Active: activating (start-pre) since Fri 2023-01-06 08:11:17 CST; 100ms ago      Docs: man:radiusd(8)            man:radiusd.conf(5)            http://wiki.freeradius.org/            http://networkradius.com/doc/  Main PID: 2519 (code=killed, signal=SEGV); Control PID: 1631 (freeradius)     Tasks: 1 (limit: 4915)    CGroup: /system.slice/freeradius.service            └─1631 /usr/sbin/freeradius -Cxm -lstdout # systemctl start freeradius.service Job for freeradius.service failed because the control process exited with error code. See "systemctl status freeradius.service" and "journalctl -xe" for details. # journalctl -xe-- Subject: Unit freeradius.service has failed -- Defined-By: systemd -- Support: http://www.ubuntu.com/support -- -- Unit freeradius.service has failed. -- -- The result is RESULT. freeradius.service: Service hold-off time over, scheduling restart. freeradius.service: Scheduled restart job, restart counter is at 1441. -- Subject: Automatic restarting of a unit has been scheduled-- Defined-By: systemd -- Support: http://www.ubuntu.com/support -- -- Automatic restarting of the unit freeradius.service has been scheduled, as the result for -- the configured Restart= setting for the unit. Stopped FreeRADIUS multi-protocol policy server.-- Subject: Unit freeradius.service has finished shutting down -- Defined-By: systemd -- Support: http://www.ubuntu.com/support -- -- Unit freeradius.service has finished shutting down. Starting FreeRADIUS multi-protocol policy server...-- Subject: Unit freeradius.service has begun start-up -- Defined-By: systemd -- Support: http://www.ubuntu.com/support -- -- Unit freeradius.service has begun starting up. : FreeRADIUS Version 3.0.16: Copyright (C) 1999-2017 The FreeRADIUS server project and contributors : There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A : PARTICULAR PURPOSE : You may redistribute copies of FreeRADIUS under the terms of the : GNU General Public License : For more information about these matters, see the file named COPYRIGHT : Starting - reading configuration files ... : Debugger not attached : Creating attribute Unix-Group : [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay"         found in filter list for realm "DEFAULT". : [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec"         found in filter list for realm "DEFAULT". : rlm_mschap (mschap): using internal authentication : rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output : rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked : /etc/freeradius/3.0/sites-enabled/inner-tunnel[250]: Failed to find "eap" as a module or policy. : /etc/freeradius/3.0/sites-enabled/inner-tunnel[250]: Please verify that the configuration exists in /etc/freeradius/3.0/mods-enabled/eap. : /etc/freeradius/3.0/sites-enabled/inner-tunnel[200]: Errors parsing authenticate section. : freeradius.service: Control process exited, code=exited status=1 : freeradius.service: Failed with result 'exit-code'. : Failed to start FreeRADIUS multi-protocol policy server.

2 1

Renaming of radusergroup table is not bound to the sql mod file definition
by Conrad Classen 04 Jan '23

04 Jan '23

Good day I need to rename the radusergroup and radreply tables in order to ensure that different radius servers using a common database do not hand out he incorrect Framed-Ip-Address attribute as well as the group used for each specific radius server. I have many thousands of SIM's being authenticated and need to ensure that there is a separation on the common database server. The radreply table rename works correctly in that the name defined for the table in the sql mod is what will be used. However, the table name I have defined in the sql mod file for the radusergroup table is not being used by queries, and it still continues to look for the original table name. I suspect that the table names are hard coded and the FreeRadius server is using that. I am using FreeRadius 3.2.1 radiusd -v radiusd: FreeRADIUS Version 3.2.1, for host x86_64-redhat-linux-gnu, built on Oct 3 2022 at 22:07:38 FreeRADIUS Version 3.2.1 Copyright (C) 1999-2022 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT The following from the radiusd -X debug output shows that the table name I have set is not being used. rlm_sql_postgresql: Status: PGRES_FATAL_ERROR rlm_sql_postgresql: 42P01: UNDEFINED TABLE (5) sql: rlm_sql_postgresql: ERROR: relation "radusergroup" does not exist (5) sql: rlm_sql_postgresql: LINE 1: SELECT GroupName FROM radusergroup WHERE Us... (5) sql: rlm_sql_postgresql: ^ (5) sql: rlm_sql_postgresql: QUERY: SELECT GroupName FROM radusergroup WHERE UserName = NEW.UserName (5) sql: rlm_sql_postgresql: CONTEXT: PL/pgSQL function upd_radgroups() line 7 at SQL statement (5) sql: SQL query returned: need alt query Thanks -- Conrad

2 1

Wi-Fi WPA EAP type negotiation question
by d tbsky 29 Dec '22

29 Dec '22

Hi: I had used freeradius EAP-PEAP-MSCHAPv2 + EAP-PEAP-GTC with Wi-Fi for several years. I had a concept in mind (which seems wrong) that a client would send EAP requests blindly. so client and server should set up correct EAP type parameters before connection. When I found that Win10 supports EAP-TTLS natively, I tried to use it. and I found that when I switch EAP-PEAP/EAP-TTLS settings at freeradius, Win10 and IOS/MacOS would detect it automatically and use the correct EAP type. I use "radiusd -X" to monitor the traffic, it seems freeradius would send something to the client at first response, although I don't know what's inside the EAP Message. I found Win10 will auto detect/support EAP-PEAP-MSCHAPv2/PEAP-TTLS-GTC/PEAP-TTLS-PAP. IOS/MacOS will auto detect/support EAP-PEAP-MSCHAPv2/EAP-PEAP-GTC/EAP-TTLS-GTC. but IOS/MacOS didn't detect EAP-TTLS-PAP. so I don't know if "default_eap_type = pap" is a correct parameter under the ttls section. Win10/Win11 will auto detect and accept PEAP-TTLS-GTC as PEAP-TTLS-PAP which seems strange but a good thing to me.Android seems lazy and doesn't auto-detect anything and just wants the user to input EAP parameters manually. Is there documents about what's behind the scene? Can I decode the EAP Message to know what information is exchanged between client and server? Thanks a lot for the clarification!! Regards, tbskyd

3 2

Centralized accounting and coa/disconnect
by BuzzSaw Code 28 Dec '22

28 Dec '22

We have several distributed RADIUS servers that have been using the robust-proxy-accounting model to centrally log accounting information into a mysql database. Now we want to use that info for coa/disconnects. In the coa virtual server example, the RADIUS server gets a coa packet, then looks up the required data to form the coa packet to send to the NAS. Is there a way to have the centralized accounting server receive the disconnect packet, lookup the info in that mysql instance, then proxy that to the right source RADIUS server, so that server can send the coa (or disconnect) to the NAS ? Some vendors either only allow one or two RADIUS servers and those servers must be used for auth/accounting. We really don't want that central accounting server performing auth for everything, thus why we want to proxy it locally to the right instance for the NAS. So can something like that work or do we need to come up with plan B ?

4 8

ippool: not found -> not sending reply
by Volodymyr Litovka 27 Dec '22

27 Dec '22

Hi, I have in 'users' two kinds of users - one with static IP assignments (Framed-IP-Address) and one with ippool. The issues comes with those 'static' users - when accounting stop happens, ippool behaves in the following way: (16) main_pool: EXPAND %{NAS-IP-Address} %{NAS-Port} (16) main_pool: --> xxx.xxx.xx.xx 892625506 (16) main_pool: MD5 on 'key' directive maps to: bc959cb51c2c3d41c93f922f572ee1d9 (16) main_pool: Searching for an entry for key: 'xxx.xxx.xx.xx 892625506' (16) main_pool: Entry not found (16) [main_pool] = notfound (16) } # accounting = notfound *(16) Not sending reply to client.* it _looks_ as it has no consequences except timeouts and resends on NAS side, but I don't like error-like behaviour. So I was able to fix this with the following statement in 'accounting' section (which is responsible for freeing the lease): redundant { main_pool ok } so regardless of main_pool's error, always return ok. But I have a question - while this is not leasing, but freeing of the lease, whether such rough override can impact something else? Whether it's make sense to add more granular control like "if main_pool returns notfound then it's ok" ? And, sorry for this - how it can be written using unlang? Thank you. -- Volodymyr Litovka "Vision without Execution is Hallucination." -- Thomas Edison

2 2

modify NAS-Port in incoming messages
by Volodymyr Litovka 27 Dec '22

27 Dec '22

Hi colleagues, I'm trying to use Freeradius with Strongswan and have an issue with "registering" user sessions. In short, upon IPSec session reconfiguring (to be more precise - IKE_SA rekeying) Strongswan changes NAS-Port attribute and, thus, FreeRadius upon receiving of next Interim-Update with another NAS-Port value, consider it as a new session and create new entry in radutmp db, so finally I have the following (TTY is NAS-Port received from NAS): root@vpn01:/etc/freeradius/3.0# radwho Login Name What TTY When From Location doka doka shell S3 Sun 22:44 xxx.xxx.xx.xx 100.100.2.1 doka doka shell S4 Sun 22:53 xxx.xxx.xx.xx 100.100.2.1 doka doka shell S5 Sun 23:03 xxx.xxx.xx.xx 100.100.2.1 doka doka shell S6 Sun 23:12 xxx.xxx.xx.xx 100.100.2.1 doka doka shell S12 Sun 23:27 xxx.xxx.xx.xx 100.100.2.1 doka doka shell S15 Sun 23:35 xxx.xxx.xx.xx 100.100.2.1 doka doka shell S18 Sun 23:40 xxx.xxx.xx.xx 100.100.2.1 doka doka shell S19 Sun 23:51 xxx.xxx.xx.xx 100.100.2.1 which makes it impossible to use Simultaneous-Use. There is attribute which do not change during IKE_SA rekey - Acct-Session-Id and I'd like to use it instead of Nas-Port to identify this session, but have two issues: - the statement (added to preacct section of 'default' site): update request { NAS-Port = %{integer:%{base64:&Acct-Session-Id}} } gives an error: /etc/freeradius/3.0/sites-enabled/default[610]: Unknown or invalid value "%{integer:%{base64:&Acct-Session-Id}}" for attribute NAS-Port while if using double quotes `... = "%{integer...}"` converts the value improperly: (3) # Executing section preacct from file /etc/freeradius/3.0/sites-enabled/default (3) preacct { (3) [preprocess] = ok (3) update request { *(3) EXPAND %{integer:%{base64:&Acct-Session-Id}}* (3) --> *(3) NAS-Port = 0* (3) } # update request = noop - and nevertheless, in second case accounting records in 'details' file contains the original NAS-Port value: Mon Dec 26 00:17:19 2022 Acct-Status-Type = Interim-Update Acct-Session-Id = "1672007843-24" Class = 0x70667367726f7570 NAS-Port-Type = Virtual Service-Type = Framed-User *NAS-Port = 25* and radutmp continues to expand the list of connections with original NAS-Port value: doka doka shell *S24* Mon 00:14 xxx.xxx.xx.xx 100.100.2.1 doka doka shell *S25* Mon 00:24 xxx.xxx.xx.xx 100.100.2.1 So, there are two questions: - what is correct way to uniquely convert string to integer? - whether it's possible to mangle NAS-Port attribute to achieve what I need? Thank you! Have a nice holidays and happy next year :-) -- Volodymyr Litovka "Vision without Execution is Hallucination." -- Thomas Edison

2 4

radclient test data
by vaiost SSSS 27 Dec '22

27 Dec '22

Hi,I'm using freeradius 3.2.1 just to log Accounting requests (preferably through linelog module) so as to process data later with an external process.The problem is that when stress freeradius using radclient, many requests are not logged both using linelog or detail modules. I believe that there is something wrong with my test data that is stored in a simple file(i.e. acct_test.txt).Thank you in advanceRegards radclient -f acct_test.txt -c 5000 -t 1 -x -p 10 172.19.185.60 acct m2msdp2022|grep Accounting-Response|wc -lTue Dec 27 13:38:11 EET 2022radclient: Received reply to request we did not send. (id=21 socket 4)radclient: Received reply to request we did not send. (id=59 socket 4)5000 acct_test.txtAcct-Status-Type=StopAcct-Session-Id="testing"NAS-IP-Address=10.95.142.77#User-Name=vaiosCalled-Station-Id=306974028024Framed-IP-Address=10.37.236.170Event-Timestamp=1667211238Acct-Session-Id=C110DB4B857B4FB3Service-Type=FramedFramed-Protocol=PPTP3GPP-IMSI=2020109233950123GPP-Charging-ID=2239451059

2 1

sql ldap simultaneous-use
by mcury 23 Dec '22

23 Dec '22

Hi, I'm new to freeradius, currently trying to enforce simultaneous-use = 1 in my wireless network but it is not working. unifi access point > freeradius > samba-ad-dc mysql> SELECT COUNT(*) FROM radacct WHERE username = 'vanessa' AND acctstoptime IS NULL; +----------+ | COUNT(*) | +----------+ | 2 | +----------+ 1 row in set (0.00 sec) I'm using LDAP for authentication through post-auth section in sites-available/default file using Unlang and its working perfectly. (11) if (LDAP-Group == "wifi_users" && NAS-IP-Address == "172.16.200.3") -> TRUE (11) if (LDAP-Group == "wifi_users" && NAS-IP-Address == "172.16.200.3") { (11) update { (11) control:Simultaneous-Use := 1 (11) reply:Class := 0x776966695f7573657273 (11) } # update = noop (11) [noop] = noop (11) } # if (LDAP-Group == "wifi_users" && NAS-IP-Address == "172.16.200.3") = noop (11) ... skipping elsif: Preceding "if" was taken (11) } # post-auth = ok (11) Sent Access-Accept Id 77 from 192.168.255.241:1812 to 172.16.200.3:38173 length 187 LDAP attribute map as per below: mods-available/ldap: update { ... control:Simultaneous-Use += 'radiusSimultaneousUse = 1' sql is included inside session { section as per documentation. Any tips, perhaps I forgot something? Thanks in advance

2 2

certificate expired with PEAP/MSCHAPv2/Android 11 in WiFi
by Olivier 20 Dec '22

20 Dec '22

Hello, For some times now, Android 11 requires cert validation in WiFi connections (see [1]). At the same time, Android 11 also makes it much harder for end users to import self-signed root CA (see [2]). As I provide WiFi connectivity in BYOD environments and can't help end users when they import certs, I choosed to test PEAP/MSCHAPv2 with LetsEncrypt certs though I know this would be less secure than with self-signed root CA. I'm planning to generate and renew LetsEncrypt cert on a remote Internet-connected host, and then copy both privkey.pem and fullchain.pem files to Freeradius instance, as suggested by [3]. In my lab setup, I'm using a Samsung Galaxy Tab A7 Lite to test. Though being Android 11-powered, this device also allows Do-Not-Validate pre-Android 11 option ! When I connect to WiFi with this device, I'm using the following settings: Identity: bar Password: whateverneeded CA Certificate: use system certificate Online cert status: do not validate Domain: the exact CN value My lab setup includes: - a Freeradius 3.0.21 on Debian Bullseye - a Unifi WiFi Network 6.5.55 with WiFi AP - a Samsung Galaxy Tab A7 Lite - valid LetsEncrypt certs My certs files are copied into Freeradius host as: # ls -l /etc/freeradius/3.0/certs/letsencrypt/ total 12 -rw-r----- 1 freerad freerad 5604 27 juin 19:04 fullchain.pem -rw------- 1 freerad freerad 1704 27 juin 19:04 privkey.pem # openssl x509 -dates -noout -in /etc/freeradius/3.0/certs/letsencrypt/fullchain.pem notBefore=May 28 17:32:21 2022 GMT notAfter=Aug 26 17:32:20 2022 GMT [1] https://internet-access-guide.com/android-wifi-ca-certificate-do-not-valida… [2] https://httptoolkit.tech/blog/android-11-trust-ca-certificates/ [3] https://framebyframewifi.net/2017/01/29/use-lets-encrypt-certificates-with-… When I connect to WiFi, this is part of freeradius -X output: # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } ... rlm_mschap (mschap): using internal authentication # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/3.0/certs" pem_file_type = yes private_key_file = "/etc/freeradius/3.0/certs/letsencrypt/privkey.pem" certificate_file = "/etc/freeradius/3.0/certs/letsencrypt/fullchain.pem" ca_file = "/etc/ssl/certs/ca-certificates.crt" private_key_password = <<< secret >>> dh_file = "/etc/freeradius/3.0/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" disable_tlsv1 = yes disable_tlsv1_1 = yes tls_max_version = "1.2" tls_min_version = "1.2" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } Please use tls_min_version and tls_max_version instead of disable_tlsv1 Please use tls_min_version and tls_max_version instead of disable_tlsv1_2 # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/3.0/radiusd.conf } # server server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/3.0/sites-enabled/inner-tunnel:336 } # server inner-tunnel server default { # from file /etc/freeradius/3.0/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on proxy address * port 56401 Listening on proxy address :: port 45775 Ready to process requests (26) eap: Peer sent EAP Response (code 2) ID 1 length 141 (26) eap: Continuing tunnel setup (26) [eap] = ok (26) } # authorize = ok (26) Found Auth-Type = eap (26) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (26) authenticate { (26) eap: Expiring EAP session with state 0xc733062dc6321fce (26) eap: Finished EAP session with state 0xc733062dc6321fce (26) eap: Previous EAP request found for state 0xc733062dc6321fce, released from the list (26) eap: Peer sent packet with method EAP PEAP (25) (26) eap: Calling submodule eap_peap to process data (26) eap_peap: Continuing EAP-TLS (26) eap_peap: Peer indicated complete TLS record size will be 131 bytes (26) eap_peap: Got complete TLS record (131 bytes) (26) eap_peap: [eaptls verify] = length included (26) eap_peap: (other): before SSL initialization (26) eap_peap: TLS_accept: before SSL initialization (26) eap_peap: TLS_accept: before SSL initialization (26) eap_peap: <<< recv TLS 1.3 [length 007e] (26) eap_peap: TLS_accept: SSLv3/TLS read client hello (26) eap_peap: >>> send TLS 1.2 [length 003d] (26) eap_peap: TLS_accept: SSLv3/TLS write server hello (26) eap_peap: >>> send TLS 1.2 [length 0fbe] (26) eap_peap: TLS_accept: SSLv3/TLS write certificate (26) eap_peap: >>> send TLS 1.2 [length 014d] (26) eap_peap: TLS_accept: SSLv3/TLS write key exchange (26) eap_peap: >>> send TLS 1.2 [length 0004] (26) eap_peap: TLS_accept: SSLv3/TLS write server done (26) eap_peap: TLS_accept: Need to read more data: SSLv3/TLS write server done (26) eap_peap: TLS - In Handshake Phase (26) eap_peap: TLS - got 4448 bytes of data (26) eap_peap: [eaptls process] = handled (26) eap: Sending EAP Request (code 1) ID 2 length 1004 (26) eap: EAP session adding &reply:State = 0xc733062dc5311fce (26) [eap] = handled (26) } # authenticate = handled (26) Using Post-Auth-Type Challenge (26) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (26) Challenge { ... } # empty sub-section is ignored (26) Sent Access-Challenge Id 43 from 192.168.1.244:1812 to 192.168.1.50:58452 length 0 (26) EAP-Message = 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 (26) Message-Authenticator = 0x00000000000000000000000000000000 (26) State = 0xc733062dc5311fceda200d98107c2728 (26) Finished request Waking up in 4.9 seconds. (27) Received Access-Request Id 44 from 192.168.1.50:58452 to 192.168.1.244:1812 length 231 (27) User-Name = "bar" (27) NAS-IP-Address = 192.168.1.50 (27) NAS-Identifier = "f09fc2f50d43" (27) Called-Station-Id = "F0-9F-C2-F5-0D-43:MyCompany" (27) NAS-Port-Type = Wireless-802.11 (27) Service-Type = Framed-User (27) Calling-Station-Id = "2E-9A-17-FA-78-FA" (27) Connect-Info = "CONNECT 0Mbps 802.11b" (27) Acct-Session-Id = "2087B41CCAAC0F74" (27) Acct-Multi-Session-Id = "C546EF77BB09F037" (27) WLAN-Pairwise-Cipher = 1027076 (27) WLAN-Group-Cipher = 1027076 (27) WLAN-AKM-Suite = 1027073 (27) Framed-MTU = 1400 (27) EAP-Message = 0x020200061900 (27) State = 0xc733062dc5311fceda200d98107c2728 (27) Message-Authenticator = 0x39f4e95b5909f1152843a2e02fbaffde (27) session-state: No cached attributes (27) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (27) authorize { (27) policy filter_username { (27) if (&User-Name) { (27) if (&User-Name) -> TRUE (27) if (&User-Name) { (27) if (&User-Name =~ / /) { (27) if (&User-Name =~ / /) -> FALSE (27) if (&User-Name =~ /@[^@]*@/ ) { (27) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (27) if (&User-Name =~ /\.\./ ) { (27) if (&User-Name =~ /\.\./ ) -> FALSE (27) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (27) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (27) if (&User-Name =~ /\.$/) { (27) if (&User-Name =~ /\.$/) -> FALSE (27) if (&User-Name =~ /(a)\./) { (27) if (&User-Name =~ /(a)\./) -> FALSE (27) } # if (&User-Name) = notfound (27) } # policy filter_username = notfound (27) [preprocess] = ok (27) [chap] = noop (27) [mschap] = noop (27) [digest] = noop (27) suffix: Checking for suffix after "@" (27) suffix: No '@' in User-Name = "bar", looking up realm NULL (27) suffix: No such realm "NULL" (27) [suffix] = noop (27) eap: Peer sent EAP Response (code 2) ID 2 length 6 (27) eap: Continuing tunnel setup (27) [eap] = ok (27) } # authorize = ok (27) Found Auth-Type = eap (27) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (27) authenticate { (27) eap: Expiring EAP session with state 0xc733062dc5311fce (27) eap: Finished EAP session with state 0xc733062dc5311fce (27) eap: Previous EAP request found for state 0xc733062dc5311fce, released from the list (27) eap: Peer sent packet with method EAP PEAP (25) (27) eap: Calling submodule eap_peap to process data (27) eap_peap: Continuing EAP-TLS (27) eap_peap: Peer ACKed our handshake fragment (27) eap_peap: [eaptls verify] = request (27) eap_peap: [eaptls process] = handled (27) eap: Sending EAP Request (code 1) ID 3 length 1000 (27) eap: EAP session adding &reply:State = 0xc733062dc4301fce (27) [eap] = handled (27) } # authenticate = handled (27) Using Post-Auth-Type Challenge (27) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (27) Challenge { ... } # empty sub-section is ignored (27) Sent Access-Challenge Id 44 from 192.168.1.244:1812 to 192.168.1.50:58452 length 0 (27) EAP-Message = 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 (27) Message-Authenticator = 0x00000000000000000000000000000000 (27) State = 0xc733062dc4301fceda200d98107c2728 (27) Finished request Waking up in 4.9 seconds. (28) Received Access-Request Id 45 from 192.168.1.50:58452 to 192.168.1.244:1812 length 231 (28) User-Name = "bar" (28) NAS-IP-Address = 192.168.1.50 (28) NAS-Identifier = "f09fc2f50d43" (28) Called-Station-Id = "F0-9F-C2-F5-0D-43:MyCompany" (28) NAS-Port-Type = Wireless-802.11 (28) Service-Type = Framed-User (28) Calling-Station-Id = "2E-9A-17-FA-78-FA" (28) Connect-Info = "CONNECT 0Mbps 802.11b" (28) Acct-Session-Id = "2087B41CCAAC0F74" (28) Acct-Multi-Session-Id = "C546EF77BB09F037" (28) WLAN-Pairwise-Cipher = 1027076 (28) WLAN-Group-Cipher = 1027076 (28) WLAN-AKM-Suite = 1027073 (28) Framed-MTU = 1400 (28) EAP-Message = 0x020300061900 (28) State = 0xc733062dc4301fceda200d98107c2728 (28) Message-Authenticator = 0x441e1d2d2df0e955fe4065c44cb93a6b (28) session-state: No cached attributes (28) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (28) authorize { (28) policy filter_username { (28) if (&User-Name) { (28) if (&User-Name) -> TRUE (28) if (&User-Name) { (28) if (&User-Name =~ / /) { (28) if (&User-Name =~ / /) -> FALSE (28) if (&User-Name =~ /@[^@]*@/ ) { (28) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (28) if (&User-Name =~ /\.\./ ) { (28) if (&User-Name =~ /\.\./ ) -> FALSE (28) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (28) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (28) if (&User-Name =~ /\.$/) { (28) if (&User-Name =~ /\.$/) -> FALSE (28) if (&User-Name =~ /(a)\./) { (28) if (&User-Name =~ /(a)\./) -> FALSE (28) } # if (&User-Name) = notfound (28) } # policy filter_username = notfound (28) [preprocess] = ok (28) [chap] = noop (28) [mschap] = noop (28) [digest] = noop (28) suffix: Checking for suffix after "@" (28) suffix: No '@' in User-Name = "bar", looking up realm NULL (28) suffix: No such realm "NULL" (28) [suffix] = noop (28) eap: Peer sent EAP Response (code 2) ID 3 length 6 (28) eap: Continuing tunnel setup (28) [eap] = ok (28) } # authorize = ok (28) Found Auth-Type = eap (28) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (28) authenticate { (28) eap: Expiring EAP session with state 0xc733062dc4301fce (28) eap: Finished EAP session with state 0xc733062dc4301fce (28) eap: Previous EAP request found for state 0xc733062dc4301fce, released from the list (28) eap: Peer sent packet with method EAP PEAP (25) (28) eap: Calling submodule eap_peap to process data (28) eap_peap: Continuing EAP-TLS (28) eap_peap: Peer ACKed our handshake fragment (28) eap_peap: [eaptls verify] = request (28) eap_peap: [eaptls process] = handled (28) eap: Sending EAP Request (code 1) ID 4 length 1000 (28) eap: EAP session adding &reply:State = 0xc733062dc3371fce (28) [eap] = handled (28) } # authenticate = handled (28) Using Post-Auth-Type Challenge (28) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (28) Challenge { ... } # empty sub-section is ignored (28) Sent Access-Challenge Id 45 from 192.168.1.244:1812 to 192.168.1.50:58452 length 0 (28) EAP-Message = 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 (28) Message-Authenticator = 0x00000000000000000000000000000000 (28) State = 0xc733062dc3371fceda200d98107c2728 (28) Finished request Waking up in 4.9 seconds. (29) Received Access-Request Id 46 from 192.168.1.50:58452 to 192.168.1.244:1812 length 231 (29) User-Name = "bar" (29) NAS-IP-Address = 192.168.1.50 (29) NAS-Identifier = "f09fc2f50d43" (29) Called-Station-Id = "F0-9F-C2-F5-0D-43:MyCompany" (29) NAS-Port-Type = Wireless-802.11 (29) Service-Type = Framed-User (29) Calling-Station-Id = "2E-9A-17-FA-78-FA" (29) Connect-Info = "CONNECT 0Mbps 802.11b" (29) Acct-Session-Id = "2087B41CCAAC0F74" (29) Acct-Multi-Session-Id = "C546EF77BB09F037" (29) WLAN-Pairwise-Cipher = 1027076 (29) WLAN-Group-Cipher = 1027076 (29) WLAN-AKM-Suite = 1027073 (29) Framed-MTU = 1400 (29) EAP-Message = 0x020400061900 (29) State = 0xc733062dc3371fceda200d98107c2728 (29) Message-Authenticator = 0x662064b545b5aa385ea1ebd63c5d881b (29) session-state: No cached attributes (29) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (29) authorize { (29) policy filter_username { (29) if (&User-Name) { (29) if (&User-Name) -> TRUE (29) if (&User-Name) { (29) if (&User-Name =~ / /) { (29) if (&User-Name =~ / /) -> FALSE (29) if (&User-Name =~ /@[^@]*@/ ) { (29) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (29) if (&User-Name =~ /\.\./ ) { (29) if (&User-Name =~ /\.\./ ) -> FALSE (29) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (29) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (29) if (&User-Name =~ /\.$/) { (29) if (&User-Name =~ /\.$/) -> FALSE (29) if (&User-Name =~ /(a)\./) { (29) if (&User-Name =~ /(a)\./) -> FALSE (29) } # if (&User-Name) = notfound (29) } # policy filter_username = notfound (29) [preprocess] = ok (29) [chap] = noop (29) [mschap] = noop (29) [digest] = noop (29) suffix: Checking for suffix after "@" (29) suffix: No '@' in User-Name = "bar", looking up realm NULL (29) suffix: No such realm "NULL" (29) [suffix] = noop (29) eap: Peer sent EAP Response (code 2) ID 4 length 6 (29) eap: Continuing tunnel setup (29) [eap] = ok (29) } # authorize = ok (29) Found Auth-Type = eap (29) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (29) authenticate { (29) eap: Expiring EAP session with state 0xc733062dc3371fce (29) eap: Finished EAP session with state 0xc733062dc3371fce (29) eap: Previous EAP request found for state 0xc733062dc3371fce, released from the list (29) eap: Peer sent packet with method EAP PEAP (25) (29) eap: Calling submodule eap_peap to process data (29) eap_peap: Continuing EAP-TLS (29) eap_peap: Peer ACKed our handshake fragment (29) eap_peap: [eaptls verify] = request (29) eap_peap: [eaptls process] = handled (29) eap: Sending EAP Request (code 1) ID 5 length 1000 (29) eap: EAP session adding &reply:State = 0xc733062dc2361fce (29) [eap] = handled (29) } # authenticate = handled (29) Using Post-Auth-Type Challenge (29) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (29) Challenge { ... } # empty sub-section is ignored (29) Sent Access-Challenge Id 46 from 192.168.1.244:1812 to 192.168.1.50:58452 length 0 (29) EAP-Message = 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 (29) Message-Authenticator = 0x00000000000000000000000000000000 (29) State = 0xc733062dc2361fceda200d98107c2728 (29) Finished request Waking up in 4.8 seconds. (30) Received Access-Request Id 47 from 192.168.1.50:58452 to 192.168.1.244:1812 length 231 (30) User-Name = "bar" (30) NAS-IP-Address = 192.168.1.50 (30) NAS-Identifier = "f09fc2f50d43" (30) Called-Station-Id = "F0-9F-C2-F5-0D-43:MyCompany" (30) NAS-Port-Type = Wireless-802.11 (30) Service-Type = Framed-User (30) Calling-Station-Id = "2E-9A-17-FA-78-FA" (30) Connect-Info = "CONNECT 0Mbps 802.11b" (30) Acct-Session-Id = "2087B41CCAAC0F74" (30) Acct-Multi-Session-Id = "C546EF77BB09F037" (30) WLAN-Pairwise-Cipher = 1027076 (30) WLAN-Group-Cipher = 1027076 (30) WLAN-AKM-Suite = 1027073 (30) Framed-MTU = 1400 (30) EAP-Message = 0x020500061900 (30) State = 0xc733062dc2361fceda200d98107c2728 (30) Message-Authenticator = 0xdb1a11eda65bfd28f2bae8a4467c4bea (30) session-state: No cached attributes (30) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (30) authorize { (30) policy filter_username { (30) if (&User-Name) { (30) if (&User-Name) -> TRUE (30) if (&User-Name) { (30) if (&User-Name =~ / /) { (30) if (&User-Name =~ / /) -> FALSE (30) if (&User-Name =~ /@[^@]*@/ ) { (30) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (30) if (&User-Name =~ /\.\./ ) { (30) if (&User-Name =~ /\.\./ ) -> FALSE (30) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (30) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (30) if (&User-Name =~ /\.$/) { (30) if (&User-Name =~ /\.$/) -> FALSE (30) if (&User-Name =~ /(a)\./) { (30) if (&User-Name =~ /(a)\./) -> FALSE (30) } # if (&User-Name) = notfound (30) } # policy filter_username = notfound (30) [preprocess] = ok (30) [chap] = noop (30) [mschap] = noop (30) [digest] = noop (30) suffix: Checking for suffix after "@" (30) suffix: No '@' in User-Name = "bar", looking up realm NULL (30) suffix: No such realm "NULL" (30) [suffix] = noop (30) eap: Peer sent EAP Response (code 2) ID 5 length 6 (30) eap: Continuing tunnel setup (30) [eap] = ok (30) } # authorize = ok (30) Found Auth-Type = eap (30) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (30) authenticate { (30) eap: Expiring EAP session with state 0xc733062dc2361fce (30) eap: Finished EAP session with state 0xc733062dc2361fce (30) eap: Previous EAP request found for state 0xc733062dc2361fce, released from the list (30) eap: Peer sent packet with method EAP PEAP (25) (30) eap: Calling submodule eap_peap to process data (30) eap_peap: Continuing EAP-TLS (30) eap_peap: Peer ACKed our handshake fragment (30) eap_peap: [eaptls verify] = request (30) eap_peap: [eaptls process] = handled (30) eap: Sending EAP Request (code 1) ID 6 length 478 (30) eap: EAP session adding &reply:State = 0xc733062dc1351fce (30) [eap] = handled (30) } # authenticate = handled (30) Using Post-Auth-Type Challenge (30) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (30) Challenge { ... } # empty sub-section is ignored (30) Sent Access-Challenge Id 47 from 192.168.1.244:1812 to 192.168.1.50:58452 length 0 (30) EAP-Message = 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 (30) Message-Authenticator = 0x00000000000000000000000000000000 (30) State = 0xc733062dc1351fceda200d98107c2728 (30) Finished request Waking up in 4.8 seconds. (31) Received Access-Request Id 48 from 192.168.1.50:58452 to 192.168.1.244:1812 length 242 (31) User-Name = "bar" (31) NAS-IP-Address = 192.168.1.50 (31) NAS-Identifier = "f09fc2f50d43" (31) Called-Station-Id = "F0-9F-C2-F5-0D-43:MyCompany" (31) NAS-Port-Type = Wireless-802.11 (31) Service-Type = Framed-User (31) Calling-Station-Id = "2E-9A-17-FA-78-FA" (31) Connect-Info = "CONNECT 0Mbps 802.11b" (31) Acct-Session-Id = "2087B41CCAAC0F74" (31) Acct-Multi-Session-Id = "C546EF77BB09F037" (31) WLAN-Pairwise-Cipher = 1027076 (31) WLAN-Group-Cipher = 1027076 (31) WLAN-AKM-Suite = 1027073 (31) Framed-MTU = 1400 (31) EAP-Message = 0x020600111980000000071503030002022d (31) State = 0xc733062dc1351fceda200d98107c2728 (31) Message-Authenticator = 0x96fa48935246587652cd6219e8243639 (31) session-state: No cached attributes (31) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (31) authorize { (31) policy filter_username { (31) if (&User-Name) { (31) if (&User-Name) -> TRUE (31) if (&User-Name) { (31) if (&User-Name =~ / /) { (31) if (&User-Name =~ / /) -> FALSE (31) if (&User-Name =~ /@[^@]*@/ ) { (31) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (31) if (&User-Name =~ /\.\./ ) { (31) if (&User-Name =~ /\.\./ ) -> FALSE (31) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (31) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (31) if (&User-Name =~ /\.$/) { (31) if (&User-Name =~ /\.$/) -> FALSE (31) if (&User-Name =~ /(a)\./) { (31) if (&User-Name =~ /(a)\./) -> FALSE (31) } # if (&User-Name) = notfound (31) } # policy filter_username = notfound (31) [preprocess] = ok (31) [chap] = noop (31) [mschap] = noop (31) [digest] = noop (31) suffix: Checking for suffix after "@" (31) suffix: No '@' in User-Name = "bar", looking up realm NULL (31) suffix: No such realm "NULL" (31) [suffix] = noop (31) eap: Peer sent EAP Response (code 2) ID 6 length 17 (31) eap: Continuing tunnel setup (31) [eap] = ok (31) } # authorize = ok (31) Found Auth-Type = eap (31) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (31) authenticate { (31) eap: Expiring EAP session with state 0xc733062dc1351fce (31) eap: Finished EAP session with state 0xc733062dc1351fce (31) eap: Previous EAP request found for state 0xc733062dc1351fce, released from the list (31) eap: Peer sent packet with method EAP PEAP (25) (31) eap: Calling submodule eap_peap to process data (31) eap_peap: Continuing EAP-TLS (31) eap_peap: Peer indicated complete TLS record size will be 7 bytes (31) eap_peap: Got complete TLS record (7 bytes) (31) eap_peap: [eaptls verify] = length included (31) eap_peap: <<< recv TLS 1.2 [length 0002] (31) eap_peap: ERROR: TLS Alert read:fatal:certificate expired (31) eap_peap: TLS_accept: Need to read more data: error (31) eap_peap: ERROR: Failed in __FUNCTION__ (SSL_read): error:14094415:SSL routines:ssl3_read_bytes:sslv3 alert certificate expired (31) eap_peap: TLS - In Handshake Phase (31) eap_peap: TLS - Application data. (31) eap_peap: ERROR: TLS failed during operation (31) eap_peap: ERROR: [eaptls process] = fail (31) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module failed (31) eap: Sending EAP Failure (code 4) ID 6 length 4 (31) eap: Failed in EAP select (31) [eap] = invalid (31) } # authenticate = invalid (31) Failed to authenticate the user (31) Using Post-Auth-Type Reject (31) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (31) Post-Auth-Type REJECT { (31) attr_filter.access_reject: EXPAND %{User-Name} (31) attr_filter.access_reject: --> bar (31) attr_filter.access_reject: Matched entry DEFAULT at line 11 (31) [attr_filter.access_reject] = updated (31) [eap] = noop (31) policy remove_reply_message_if_eap { (31) if (&reply:EAP-Message && &reply:Reply-Message) { (31) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (31) else { (31) [noop] = noop (31) } # else = noop (31) } # policy remove_reply_message_if_eap = noop (31) } # Post-Auth-Type REJECT = updated (31) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (31) Sending delayed response (31) Sent Access-Reject Id 48 from 192.168.1.244:1812 to 192.168.1.50:58452 length 44 (31) EAP-Message = 0x04060004 (31) Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.8 seconds. (24) Cleaning up request packet ID 41 with timestamp +308 How can I correct this ? Best regards

3 5

oauth2 or oidc module for FreeRADIUS
by Việt Đức Trần 20 Dec '22

20 Dec '22

Hi Everyone! I am using FreeRADIUS version 3.2.1 installed on Ubuntu server 22.04 and I need to make a connection from my FreeRADIUS server to an external authentication server by using OAuth2 or OpenID Connect protocol. But I cannot find any available FreeRADIUS modules for OAuth2 or OpenID Connect. If these modules currently don't exist or do not support FreeRADIUS 3.2.1, how can I make the connection from my FreeRADIUS server to external authentication server via OAuth2/OIDC protocol? Thank you so much for your help./

2 2