- Freeradius-Users - lists.freeradius.org

Issues with post-auth not running in inner-tunnel/proxy-inner-tunnel
by Chris Griffin 17 Aug '22

17 Aug '22

I am currently migrating some Freeradius 2 based services over to Freeradius 3 (3.2.0), and I am having an issue with post-auth executing in the inner-tunnel. In Freeradius 2, I have some post-auth logic that runs fine, but it seems that the post-auth section does not run in Freeradius 3. I have gone through the documentation and posts to the listserv and haven't found any clues as to why. In my particular case, I am using the proxy-inner-tunnel configuration and adding a post-auth section, but in other tests, it doesn't seem that post-auth runs when I try to use the "inner-tunnel" config, which already has a post-auth section. Just to make things simple to debug, I was able to build a very simple test case which shows the problem: Steps to re-create: build 3.2.0 delete link to inner-tunnel and link to proxy-inner-tunnel. edit eap to point to proxy-inner-tunnel as virtual server add section post-auth and put: update outer.session-state { User-Name := &User-Name } just as a test action to look for. add config to proxy.conf to allow for proxying the inner tunnel to another radius server. Resulting logs when testing with eapol_test: =================================================== (0) Received Access-Request Id 0 from 127.0.0.1:41445 to 127.0.0.1:1812 length 132 (0) User-Name = "anonymous" (0) NAS-IP-Address = 127.0.0.1 (0) Calling-Station-Id = "02-00-00-00-00-01" (0) Framed-MTU = 1400 (0) NAS-Port-Type = Wireless-802.11 (0) Service-Type = Framed-User (0) Connect-Info = "CONNECT 11Mbps 802.11b" (0) EAP-Message = 0x021d000e01616e6f6e796d6f7573 (0) Message-Authenticator = 0x39ea158d433932e66e0bc072cfa388d8 (0) # Executing section authorize from file /opt/freeradius-test/etc/raddb/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "anonymous", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 29 length 14 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /opt/freeradius-test/etc/raddb/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_md5 to process data (0) eap_md5: Issuing MD5 Challenge (0) eap: Sending EAP Request (code 1) ID 30 length 22 (0) eap: EAP session adding &reply:State = 0xe675df6ee66bdb2e (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) # Executing group from file /opt/freeradius-test/etc/raddb/sites-enabled/default (0) Challenge { ... } # empty sub-section is ignored (0) Sent Access-Challenge Id 0 from 127.0.0.1:1812 to 127.0.0.1:41445 length 80 (0) EAP-Message = 0x011e001604102a157d4326f67fce4347da02b42ebd23 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0xe675df6ee66bdb2e8fcb18675fa52d04 (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 1 from 127.0.0.1:41445 to 127.0.0.1:1812 length 142 (1) User-Name = "anonymous" (1) NAS-IP-Address = 127.0.0.1 (1) Calling-Station-Id = "02-00-00-00-00-01" (1) Framed-MTU = 1400 (1) NAS-Port-Type = Wireless-802.11 (1) Service-Type = Framed-User (1) Connect-Info = "CONNECT 11Mbps 802.11b" (1) EAP-Message = 0x021e00060319 (1) State = 0xe675df6ee66bdb2e8fcb18675fa52d04 (1) Message-Authenticator = 0xd42eec5a6a092ca329ae0713a3ef3cd6 (1) session-state: No cached attributes (1) # Executing section authorize from file /opt/freeradius-test/etc/raddb/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /(a)\./) { (1) if (&User-Name =~ /(a)\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "anonymous", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 30 length 6 (1) eap: No EAP Start, assuming it's an on-going EAP conversation (1) [eap] = updated (1) [files] = noop (1) [expiration] = noop (1) [logintime] = noop Not doing PAP as Auth-Type is already set. (1) [pap] = noop (1) } # authorize = updated (1) Found Auth-Type = eap (1) # Executing group from file /opt/freeradius-test/etc/raddb/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0xe675df6ee66bdb2e (1) eap: Finished EAP session with state 0xe675df6ee66bdb2e (1) eap: Previous EAP request found for state 0xe675df6ee66bdb2e, released from the list (1) eap: Peer sent packet with method EAP NAK (3) (1) eap: Found mutually acceptable type PEAP (25) (1) eap: Calling submodule eap_peap to process data (1) eap_peap: (TLS) Initiating new session (1) eap: Sending EAP Request (code 1) ID 31 length 6 (1) eap: EAP session adding &reply:State = 0xe675df6ee76ac62e (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) # Executing group from file /opt/freeradius-test/etc/raddb/sites-enabled/default (1) Challenge { ... } # empty sub-section is ignored (1) session-state: Saving cached attributes (1) Framed-MTU = 994 (1) Sent Access-Challenge Id 1 from 127.0.0.1:1812 to 127.0.0.1:41445 length 64 (1) EAP-Message = 0x011f00061920 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0xe675df6ee76ac62e8fcb18675fa52d04 (1) Finished request Waking up in 4.9 seconds. (2) Received Access-Request Id 2 from 127.0.0.1:41445 to 127.0.0.1:1812 length 326 (2) User-Name = "anonymous" (2) NAS-IP-Address = 127.0.0.1 (2) Calling-Station-Id = "02-00-00-00-00-01" (2) Framed-MTU = 1400 (2) NAS-Port-Type = Wireless-802.11 (2) Service-Type = Framed-User (2) Connect-Info = "CONNECT 11Mbps 802.11b" (2) EAP-Message = 0x021f00be1980000000b416030100af010000ab0303f1314c571be3433e52568c36e53402e80746307dd0b21b23326981a604679922000038c02cc030009fcca9cca8ccaac02bc02f009ec024c028006bc023c0270067c00ac0140039c009c0130033009d009c003d003c0035002f00ff0100004a000b000403000102000a000c000a001d0017001e001900180016000000170000000d002600240403050306030807080808090804080a0805080b08060401050106010303030102030201 (2) State = 0xe675df6ee76ac62e8fcb18675fa52d04 (2) Message-Authenticator = 0x675e1043ccbb0dfe522b1d29bd34c303 (2) Restoring &session-state (2) &session-state:Framed-MTU = 994 (2) # Executing section authorize from file /opt/freeradius-test/etc/raddb/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /(a)\./) { (2) if (&User-Name =~ /(a)\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "anonymous", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 31 length 190 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = eap (2) # Executing group from file /opt/freeradius-test/etc/raddb/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0xe675df6ee76ac62e (2) eap: Finished EAP session with state 0xe675df6ee76ac62e (2) eap: Previous EAP request found for state 0xe675df6ee76ac62e, released from the list (2) eap: Peer sent packet with method EAP PEAP (25) (2) eap: Calling submodule eap_peap to process data (2) eap_peap: (TLS) EAP Peer says that the final record size will be 180 bytes (2) eap_peap: (TLS) EAP Got all data (180 bytes) (2) eap_peap: (TLS) Handshake state - before SSL initialization (2) eap_peap: (TLS) Handshake state - Server before SSL initialization (2) eap_peap: (TLS) Handshake state - Server before SSL initialization (2) eap_peap: (TLS) recv TLS 1.3 Handshake, ClientHello (2) eap_peap: (TLS) Handshake state - Server SSLv3/TLS read client hello (2) eap_peap: (TLS) send TLS 1.2 Handshake, ServerHello (2) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write server hello (2) eap_peap: (TLS) send TLS 1.2 Handshake, Certificate (2) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write certificate (2) eap_peap: (TLS) send TLS 1.2 Handshake, ServerKeyExchange (2) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write key exchange (2) eap_peap: (TLS) send TLS 1.2 Handshake, ServerHelloDone (2) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write server done (2) eap_peap: (TLS) Server : Need to read more data: SSLv3/TLS write server done (2) eap_peap: (TLS) In Handshake Phase (2) eap: Sending EAP Request (code 1) ID 32 length 1004 (2) eap: EAP session adding &reply:State = 0xe675df6ee455c62e (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) # Executing group from file /opt/freeradius-test/etc/raddb/sites-enabled/default (2) Challenge { ... } # empty sub-section is ignored (2) session-state: Saving cached attributes (2) Framed-MTU = 994 (2) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (2) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (2) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (2) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (2) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (2) Sent Access-Challenge Id 2 from 127.0.0.1:1812 to 127.0.0.1:41445 length 1068 (2) EAP-Message = 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 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0xe675df6ee455c62e8fcb18675fa52d04 (2) Finished request Waking up in 4.9 seconds. (3) Received Access-Request Id 3 from 127.0.0.1:41445 to 127.0.0.1:1812 length 142 (3) User-Name = "anonymous" (3) NAS-IP-Address = 127.0.0.1 (3) Calling-Station-Id = "02-00-00-00-00-01" (3) Framed-MTU = 1400 (3) NAS-Port-Type = Wireless-802.11 (3) Service-Type = Framed-User (3) Connect-Info = "CONNECT 11Mbps 802.11b" (3) EAP-Message = 0x022000061900 (3) State = 0xe675df6ee455c62e8fcb18675fa52d04 (3) Message-Authenticator = 0xfc03a376328f9a0499739fce27d2084c (3) Restoring &session-state (3) &session-state:Framed-MTU = 994 (3) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (3) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (3) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (3) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (3) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (3) # Executing section authorize from file /opt/freeradius-test/etc/raddb/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /(a)\./) { (3) if (&User-Name =~ /(a)\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "anonymous", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 32 length 6 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /opt/freeradius-test/etc/raddb/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0xe675df6ee455c62e (3) eap: Finished EAP session with state 0xe675df6ee455c62e (3) eap: Previous EAP request found for state 0xe675df6ee455c62e, released from the list (3) eap: Peer sent packet with method EAP PEAP (25) (3) eap: Calling submodule eap_peap to process data (3) eap_peap: (TLS) Peer ACKed our handshake fragment (3) eap: Sending EAP Request (code 1) ID 33 length 1000 (3) eap: EAP session adding &reply:State = 0xe675df6ee554c62e (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) # Executing group from file /opt/freeradius-test/etc/raddb/sites-enabled/default (3) Challenge { ... } # empty sub-section is ignored (3) session-state: Saving cached attributes (3) Framed-MTU = 994 (3) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (3) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (3) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (3) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (3) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (3) Sent Access-Challenge Id 3 from 127.0.0.1:1812 to 127.0.0.1:41445 length 1064 (3) EAP-Message = 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 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0xe675df6ee554c62e8fcb18675fa52d04 (3) Finished request Waking up in 4.9 seconds. (4) Received Access-Request Id 4 from 127.0.0.1:41445 to 127.0.0.1:1812 length 142 (4) User-Name = "anonymous" (4) NAS-IP-Address = 127.0.0.1 (4) Calling-Station-Id = "02-00-00-00-00-01" (4) Framed-MTU = 1400 (4) NAS-Port-Type = Wireless-802.11 (4) Service-Type = Framed-User (4) Connect-Info = "CONNECT 11Mbps 802.11b" (4) EAP-Message = 0x022100061900 (4) State = 0xe675df6ee554c62e8fcb18675fa52d04 (4) Message-Authenticator = 0x8569b7d08d76ab03703a102f5d4288b5 (4) Restoring &session-state (4) &session-state:Framed-MTU = 994 (4) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (4) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (4) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (4) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (4) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (4) # Executing section authorize from file /opt/freeradius-test/etc/raddb/sites-enabled/default (4) authorize { (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /(a)\./) { (4) if (&User-Name =~ /(a)\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "anonymous", looking up realm NULL (4) suffix: No such realm "NULL" (4) [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 33 length 6 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /opt/freeradius-test/etc/raddb/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0xe675df6ee554c62e (4) eap: Finished EAP session with state 0xe675df6ee554c62e (4) eap: Previous EAP request found for state 0xe675df6ee554c62e, released from the list (4) eap: Peer sent packet with method EAP PEAP (25) (4) eap: Calling submodule eap_peap to process data (4) eap_peap: (TLS) Peer ACKed our handshake fragment (4) eap: Sending EAP Request (code 1) ID 34 length 710 (4) eap: EAP session adding &reply:State = 0xe675df6ee257c62e (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) # Executing group from file /opt/freeradius-test/etc/raddb/sites-enabled/default (4) Challenge { ... } # empty sub-section is ignored (4) session-state: Saving cached attributes (4) Framed-MTU = 994 (4) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (4) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (4) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (4) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (4) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (4) Sent Access-Challenge Id 4 from 127.0.0.1:1812 to 127.0.0.1:41445 length 772 (4) EAP-Message = 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 (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0xe675df6ee257c62e8fcb18675fa52d04 (4) Finished request Waking up in 4.9 seconds. (5) Received Access-Request Id 5 from 127.0.0.1:41445 to 127.0.0.1:1812 length 239 (5) User-Name = "anonymous" (5) NAS-IP-Address = 127.0.0.1 (5) Calling-Station-Id = "02-00-00-00-00-01" (5) Framed-MTU = 1400 (5) NAS-Port-Type = Wireless-802.11 (5) Service-Type = Framed-User (5) Connect-Info = "CONNECT 11Mbps 802.11b" (5) EAP-Message = 0x0222006719800000005d160303002510000021205badd466a638f7537d8010eab5e0d3d8d6aaa705b329068bef15e3059fd39f501403030001011603030028c9186d481dde735885d75fa1f3d4c72bda0f66f8632b5206d9f169111cdb694c8ca57fb878cbd583 (5) State = 0xe675df6ee257c62e8fcb18675fa52d04 (5) Message-Authenticator = 0x8ea387527f36de9ea4e8f4278e256010 (5) Restoring &session-state (5) &session-state:Framed-MTU = 994 (5) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (5) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (5) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (5) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (5) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (5) # Executing section authorize from file /opt/freeradius-test/etc/raddb/sites-enabled/default (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /(a)\./) { (5) if (&User-Name =~ /(a)\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) [chap] = noop (5) [mschap] = noop (5) [digest] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "anonymous", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) eap: Peer sent EAP Response (code 2) ID 34 length 103 (5) eap: Continuing tunnel setup (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /opt/freeradius-test/etc/raddb/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0xe675df6ee257c62e (5) eap: Finished EAP session with state 0xe675df6ee257c62e (5) eap: Previous EAP request found for state 0xe675df6ee257c62e, released from the list (5) eap: Peer sent packet with method EAP PEAP (25) (5) eap: Calling submodule eap_peap to process data (5) eap_peap: (TLS) EAP Peer says that the final record size will be 93 bytes (5) eap_peap: (TLS) EAP Got all data (93 bytes) (5) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write server done (5) eap_peap: (TLS) recv TLS 1.2 Handshake, ClientKeyExchange (5) eap_peap: (TLS) Handshake state - Server SSLv3/TLS read client key exchange (5) eap_peap: (TLS) Handshake state - Server SSLv3/TLS read change cipher spec (5) eap_peap: (TLS) recv TLS 1.2 Handshake, Finished (5) eap_peap: (TLS) Handshake state - Server SSLv3/TLS read finished (5) eap_peap: (TLS) send TLS 1.2 ChangeCipherSpec (5) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write change cipher spec (5) eap_peap: (TLS) send TLS 1.2 Handshake, Finished (5) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write finished (5) eap_peap: (TLS) Handshake state - SSL negotiation finished successfully (5) eap_peap: (TLS) Connection Established (5) eap_peap: TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (5) eap_peap: TLS-Session-Version = "TLS 1.2" (5) eap: Sending EAP Request (code 1) ID 35 length 57 (5) eap: EAP session adding &reply:State = 0xe675df6ee356c62e (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) # Executing group from file /opt/freeradius-test/etc/raddb/sites-enabled/default (5) Challenge { ... } # empty sub-section is ignored (5) session-state: Saving cached attributes (5) Framed-MTU = 994 (5) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (5) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (5) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (5) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (5) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (5) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange" (5) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished" (5) TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec" (5) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished" (5) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (5) TLS-Session-Version = "TLS 1.2" (5) Sent Access-Challenge Id 5 from 127.0.0.1:1812 to 127.0.0.1:41445 length 115 (5) EAP-Message = 0x01230039190014030300010116030300282054ff1c9b5e54f29863aa0bd69ed60ba57d30beacbe09fd503621ec887b1c6569231971db0cc58b (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0xe675df6ee356c62e8fcb18675fa52d04 (5) Finished request Waking up in 4.9 seconds. (6) Received Access-Request Id 6 from 127.0.0.1:41445 to 127.0.0.1:1812 length 142 (6) User-Name = "anonymous" (6) NAS-IP-Address = 127.0.0.1 (6) Calling-Station-Id = "02-00-00-00-00-01" (6) Framed-MTU = 1400 (6) NAS-Port-Type = Wireless-802.11 (6) Service-Type = Framed-User (6) Connect-Info = "CONNECT 11Mbps 802.11b" (6) EAP-Message = 0x022300061900 (6) State = 0xe675df6ee356c62e8fcb18675fa52d04 (6) Message-Authenticator = 0x78ff7dfd696415044fb2363b8595b00c (6) Restoring &session-state (6) &session-state:Framed-MTU = 994 (6) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (6) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (6) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (6) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (6) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (6) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange" (6) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished" (6) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec" (6) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished" (6) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (6) &session-state:TLS-Session-Version = "TLS 1.2" (6) # Executing section authorize from file /opt/freeradius-test/etc/raddb/sites-enabled/default (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /(a)\./) { (6) if (&User-Name =~ /(a)\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [preprocess] = ok (6) [chap] = noop (6) [mschap] = noop (6) [digest] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "anonymous", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) eap: Peer sent EAP Response (code 2) ID 35 length 6 (6) eap: Continuing tunnel setup (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /opt/freeradius-test/etc/raddb/sites-enabled/default (6) authenticate { (6) eap: Expiring EAP session with state 0xe675df6ee356c62e (6) eap: Finished EAP session with state 0xe675df6ee356c62e (6) eap: Previous EAP request found for state 0xe675df6ee356c62e, released from the list (6) eap: Peer sent packet with method EAP PEAP (25) (6) eap: Calling submodule eap_peap to process data (6) eap_peap: (TLS) Peer ACKed our handshake fragment. handshake is finished (6) eap_peap: Session established. Decoding tunneled attributes (6) eap_peap: PEAP state TUNNEL ESTABLISHED (6) eap: Sending EAP Request (code 1) ID 36 length 40 (6) eap: EAP session adding &reply:State = 0xe675df6ee051c62e (6) [eap] = handled (6) } # authenticate = handled (6) Using Post-Auth-Type Challenge (6) # Executing group from file /opt/freeradius-test/etc/raddb/sites-enabled/default (6) Challenge { ... } # empty sub-section is ignored (6) session-state: Saving cached attributes (6) Framed-MTU = 994 (6) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (6) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (6) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (6) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (6) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (6) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange" (6) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished" (6) TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec" (6) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished" (6) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (6) TLS-Session-Version = "TLS 1.2" (6) Sent Access-Challenge Id 6 from 127.0.0.1:1812 to 127.0.0.1:41445 length 98 (6) EAP-Message = 0x012400281900170303001d2054ff1c9b5e54f33382548c13b84579a2844d2cbe8a06080b85335aba (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0xe675df6ee051c62e8fcb18675fa52d04 (6) Finished request Waking up in 4.9 seconds. (7) Received Access-Request Id 7 from 127.0.0.1:41445 to 127.0.0.1:1812 length 188 (7) User-Name = "anonymous" (7) NAS-IP-Address = 127.0.0.1 (7) Calling-Station-Id = "02-00-00-00-00-01" (7) Framed-MTU = 1400 (7) NAS-Port-Type = Wireless-802.11 (7) Service-Type = Framed-User (7) Connect-Info = "CONNECT 11Mbps 802.11b" (7) EAP-Message = 0x0224003419001703030029c9186d481dde7359fda0277d5d1165a6f67f77bd2273b9e846ae774aa73ba8c5fd0122fffdf5364740 (7) State = 0xe675df6ee051c62e8fcb18675fa52d04 (7) Message-Authenticator = 0xe17bde94850882d1c7ab3953ffe189a8 (7) Restoring &session-state (7) &session-state:Framed-MTU = 994 (7) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (7) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (7) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (7) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (7) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (7) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange" (7) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished" (7) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec" (7) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished" (7) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (7) &session-state:TLS-Session-Version = "TLS 1.2" (7) # Executing section authorize from file /opt/freeradius-test/etc/raddb/sites-enabled/default (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /(a)\./) { (7) if (&User-Name =~ /(a)\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [preprocess] = ok (7) [chap] = noop (7) [mschap] = noop (7) [digest] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "anonymous", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) eap: Peer sent EAP Response (code 2) ID 36 length 52 (7) eap: Continuing tunnel setup (7) [eap] = ok (7) } # authorize = ok (7) Found Auth-Type = eap (7) # Executing group from file /opt/freeradius-test/etc/raddb/sites-enabled/default (7) authenticate { (7) eap: Expiring EAP session with state 0xe675df6ee051c62e (7) eap: Finished EAP session with state 0xe675df6ee051c62e (7) eap: Previous EAP request found for state 0xe675df6ee051c62e, released from the list (7) eap: Peer sent packet with method EAP PEAP (25) (7) eap: Calling submodule eap_peap to process data (7) eap_peap: (TLS) EAP Done initial handshake (7) eap_peap: Session established. Decoding tunneled attributes (7) eap_peap: PEAP state WAITING FOR INNER IDENTITY (7) eap_peap: Identity - username(a)example.org (7) eap_peap: Got inner identity 'username(a)example.org' (7) eap_peap: Setting default EAP type for tunneled EAP session (7) eap_peap: Got tunneled request (7) eap_peap: EAP-Message = 0x0224001501636772696666696e4075666c2e656475 (7) eap_peap: Setting User-Name to username(a)example.org (7) eap_peap: Sending tunneled request to proxy-inner-tunnel (7) eap_peap: EAP-Message = 0x0224001501636772696666696e4075666c2e656475 (7) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (7) eap_peap: User-Name = "username(a)example.org" (7) Virtual server proxy-inner-tunnel received request (7) EAP-Message = 0x0224001501636772696666696e4075666c2e656475 (7) FreeRADIUS-Proxied-To = 127.0.0.1 (7) User-Name = "username(a)example.org" (7) server proxy-inner-tunnel { (7) # Executing section authorize from file /opt/freeradius-test/etc/raddb/sites-enabled/proxy-inner-tunnel (7) authorize { (7) update control { (7) &Proxy-To-Realm := "example.org" (7) } # update control = noop (7) } # authorize = noop (7) } # server proxy-inner-tunnel (7) Virtual server sending reply (7) eap_peap: Got tunneled reply code 0 (7) eap_peap: Tunnelled authentication will be proxied to example.org (7) eap: WARNING: Tunneled session will be proxied. Not doing EAP (7) [eap] = handled (7) } # authenticate = handled (7) Starting proxy to home server 127.0.0.1 port 1812 (7) server default { (7) } (7) Proxying request to home server 127.0.0.1 port 1812 timeout 20.000000 (7) Sent Access-Request Id 221 from 0.0.0.0:59393 to 127.0.0.1:1812 length 82 (7) EAP-Message = 0x0224001501636772696666696e4075666c2e656475 (7) User-Name = "username(a)example.org" (7) Message-Authenticator = 0x (7) Proxy-State = 0x37 Waking up in 0.3 seconds. (8) Received Access-Request Id 221 from 127.0.0.1:59393 to 127.0.0.1:1812 length 82 (8) EAP-Message = 0x0224001501636772696666696e4075666c2e656475 (8) User-Name = "username(a)example.org" (8) Message-Authenticator = 0x43b1c4ff0c835adf67913c98a827f03a (8) Proxy-State = 0x37 (8) # Executing section authorize from file /opt/freeradius-test/etc/raddb/sites-enabled/default (8) authorize { (8) policy filter_username { (8) if (&User-Name) { (8) if (&User-Name) -> TRUE (8) if (&User-Name) { (8) if (&User-Name =~ / /) { (8) if (&User-Name =~ / /) -> FALSE (8) if (&User-Name =~ /@[^@]*@/ ) { (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (8) if (&User-Name =~ /\.\./ ) { (8) if (&User-Name =~ /\.\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\.$/) { (8) if (&User-Name =~ /\.$/) -> FALSE (8) if (&User-Name =~ /(a)\./) { (8) if (&User-Name =~ /(a)\./) -> FALSE (8) } # if (&User-Name) = notfound (8) } # policy filter_username = notfound (8) [preprocess] = ok (8) [chap] = noop (8) [mschap] = noop (8) [digest] = noop (8) suffix: Checking for suffix after "@" (8) suffix: Looking up realm "example.org" for User-Name = " username(a)example.org" (8) suffix: Found realm "example.org" (8) suffix: Adding Realm = "example.org" (8) suffix: Proxying request from user username(a)example.org to realm example.org (8) suffix: Preparing to proxy authentication request to realm "example.org" (8) [suffix] = updated (8) eap: Request is supposed to be proxied to Realm example.org. Not doing EAP. (8) [eap] = noop (8) [files] = noop (8) [expiration] = noop (8) [logintime] = noop (8) [pap] = noop (8) } # authorize = updated (8) Starting proxy to home server 10.6.11.15 port 1812 (8) server default { (8) } (8) Proxying request to home server 10.6.11.15 port 1812 timeout 10.000000 (8) Sent Access-Request Id 186 from 0.0.0.0:59393 to 10.6.11.15:1812 length 99 (8) EAP-Message = 0x0224001501636772696666696e4075666c2e656475 (8) User-Name = "username(a)example.org" (8) Message-Authenticator = 0x43b1c4ff0c835adf67913c98a827f03a (8) Proxy-State = 0x37 (8) Event-Timestamp = "Aug 10 2022 08:18:59 EDT" (8) NAS-IP-Address = 127.0.0.1 (8) Proxy-State = 0x323231 Waking up in 0.3 seconds. (8) Marking home server 10.6.11.15 port 1812 alive (8) Clearing existing &reply: attributes (8) Received Access-Challenge Id 186 from 10.6.11.15:1812 to 10.6.11.22:59393 length 131 (8) Proxy-State = 0x37 (8) Proxy-State = 0x323231 (8) Session-Timeout = 60 (8) EAP-Message = 0x012500271a0125002210919965cf8da364883037da7f61f7f09e4e534c41422d4e5053324b3136 (8) State = 0x6e3e08c40000013700011700fe800000000000008df64cb7c2d32694000000045f724dfe (8) Message-Authenticator = 0x75e2f8c4ebb5d17b32cc932f2d37777b (8) server default { (8) # Executing section post-proxy from file /opt/freeradius-test/etc/raddb/sites-enabled/default (8) post-proxy { (8) eap: No pre-existing handler found (8) [eap] = noop (8) } # post-proxy = noop (8) } (8) Using Post-Auth-Type Challenge (8) # Executing group from file /opt/freeradius-test/etc/raddb/sites-enabled/default (8) Challenge { ... } # empty sub-section is ignored (8) Sent Access-Challenge Id 221 from 127.0.0.1:1812 to 127.0.0.1:59393 length 126 (8) Session-Timeout = 60 (8) EAP-Message = 0x012500271a0125002210919965cf8da364883037da7f61f7f09e4e534c41422d4e5053324b3136 (8) State = 0x6e3e08c40000013700011700fe800000000000008df64cb7c2d32694000000045f724dfe (8) Message-Authenticator = 0x75e2f8c4ebb5d17b32cc932f2d37777b (8) Proxy-State = 0x37 (8) Finished request Waking up in 0.2 seconds. (7) Marking home server 127.0.0.1 port 1812 alive (7) Clearing existing &reply: attributes (7) Received Access-Challenge Id 221 from 127.0.0.1:1812 to 127.0.0.1:59393 length 126 (7) Session-Timeout = 60 (7) EAP-Message = 0x012500271a0125002210919965cf8da364883037da7f61f7f09e4e534c41422d4e5053324b3136 (7) State = 0x6e3e08c40000013700011700fe800000000000008df64cb7c2d32694000000045f724dfe (7) Message-Authenticator = 0xaec7f4f146d52066eb1af0e204283dcd (7) Proxy-State = 0x37 (7) server default { (7) # Executing section post-proxy from file /opt/freeradius-test/etc/raddb/sites-enabled/default (7) post-proxy { (7) eap: Doing post-proxy callback (7) eap: Passing reply from proxy back into the tunnel (7) eap: Got tunneled reply RADIUS code 11 (7) eap: Session-Timeout = 60 (7) eap: EAP-Message = 0x012500271a0125002210919965cf8da364883037da7f61f7f09e4e534c41422d4e5053324b3136 (7) eap: State = 0x6e3e08c40000013700011700fe800000000000008df64cb7c2d32694000000045f724dfe (7) eap: Message-Authenticator = 0xaec7f4f146d52066eb1af0e204283dcd (7) eap: Proxy-State = 0x37 (7) eap: Got tunneled Access-Challenge (7) eap: Reply was handled (7) eap: Sending EAP Request (code 1) ID 37 length 70 (7) eap: EAP session adding &reply:State = 0xe675df6ee150c62e (7) [eap] = ok (7) } # post-proxy = ok (7) } (7) session-state: Saving cached attributes (7) Framed-MTU = 994 (7) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (7) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (7) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (7) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (7) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (7) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange" (7) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished" (7) TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec" (7) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished" (7) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (7) TLS-Session-Version = "TLS 1.2" (7) Using Post-Auth-Type Challenge (7) # Executing group from file /opt/freeradius-test/etc/raddb/sites-enabled/default (7) Challenge { ... } # empty sub-section is ignored (7) Sent Access-Challenge Id 7 from 127.0.0.1:1812 to 127.0.0.1:41445 length 128 (7) EAP-Message = 0x012500461900170303003b2054ff1c9b5e54f41704b7e71c7b36fac19dc00a4c72e794816491552341929e3a29eaacb6ed73a86178e2a411236422b3f1fb96aa4050005cfd0c (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0xe675df6ee150c62e8fcb18675fa52d04 (7) Finished request Waking up in 4.9 seconds. (9) Received Access-Request Id 8 from 127.0.0.1:41445 to 127.0.0.1:1812 length 242 (9) User-Name = "anonymous" (9) NAS-IP-Address = 127.0.0.1 (9) Calling-Station-Id = "02-00-00-00-00-01" (9) Framed-MTU = 1400 (9) NAS-Port-Type = Wireless-802.11 (9) Service-Type = Framed-User (9) Connect-Info = "CONNECT 11Mbps 802.11b" (9) EAP-Message = 0x0225006a1900170303005fc9186d481dde735a6f6ed9296cacf6e5e023ec3f83ee85a45230752da0ad7ecadeda1694f5c57198ab6841dfd339157a386210e7f3ebd75a3f15c87e8b8013129a97f5b62c4066a50056afee0c1275fd499841f9f6c4d4e00c312aafe6272e (9) State = 0xe675df6ee150c62e8fcb18675fa52d04 (9) Message-Authenticator = 0x2934573eb6545749fc175ddbb34b8896 (9) Restoring &session-state (9) &session-state:Framed-MTU = 994 (9) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (9) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (9) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (9) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (9) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (9) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange" (9) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished" (9) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec" (9) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished" (9) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (9) &session-state:TLS-Session-Version = "TLS 1.2" (9) # Executing section authorize from file /opt/freeradius-test/etc/raddb/sites-enabled/default (9) authorize { (9) policy filter_username { (9) if (&User-Name) { (9) if (&User-Name) -> TRUE (9) if (&User-Name) { (9) if (&User-Name =~ / /) { (9) if (&User-Name =~ / /) -> FALSE (9) if (&User-Name =~ /@[^@]*@/ ) { (9) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (9) if (&User-Name =~ /\.\./ ) { (9) if (&User-Name =~ /\.\./ ) -> FALSE (9) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (9) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (9) if (&User-Name =~ /\.$/) { (9) if (&User-Name =~ /\.$/) -> FALSE (9) if (&User-Name =~ /(a)\./) { (9) if (&User-Name =~ /(a)\./) -> FALSE (9) } # if (&User-Name) = notfound (9) } # policy filter_username = notfound (9) [preprocess] = ok (9) [chap] = noop (9) [mschap] = noop (9) [digest] = noop (9) suffix: Checking for suffix after "@" (9) suffix: No '@' in User-Name = "anonymous", looking up realm NULL (9) suffix: No such realm "NULL" (9) [suffix] = noop (9) eap: Peer sent EAP Response (code 2) ID 37 length 106 (9) eap: Continuing tunnel setup (9) [eap] = ok (9) } # authorize = ok (9) Found Auth-Type = eap (9) # Executing group from file /opt/freeradius-test/etc/raddb/sites-enabled/default (9) authenticate { (9) eap: Expiring EAP session with state 0xe675df6ee150c62e (9) eap: Finished EAP session with state 0xe675df6ee150c62e (9) eap: Previous EAP request found for state 0xe675df6ee150c62e, released from the list (9) eap: Peer sent packet with method EAP PEAP (25) (9) eap: Calling submodule eap_peap to process data (9) eap_peap: (TLS) EAP Done initial handshake (9) eap_peap: Session established. Decoding tunneled attributes (9) eap_peap: PEAP state phase2 (9) eap_peap: EAP method MSCHAPv2 (26) (9) eap_peap: Got tunneled request (9) eap_peap: EAP-Message = 0x0225004b1a02250046316d86546d02682c467d806da7600f65070000000000000000e909fed167b345f628d792682860607f350019b3c2b83a3800636772696666696e4075666c2e656475 (9) eap_peap: Setting User-Name to username(a)example.org (9) eap_peap: Sending tunneled request to proxy-inner-tunnel (9) eap_peap: EAP-Message = 0x0225004b1a02250046316d86546d02682c467d806da7600f65070000000000000000e909fed167b345f628d792682860607f350019b3c2b83a3800636772696666696e4075666c2e656475 (9) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (9) eap_peap: User-Name = "username(a)example.org" (9) eap_peap: State = 0x6e3e08c40000013700011700fe800000000000008df64cb7c2d32694000000045f724dfe (9) Virtual server proxy-inner-tunnel received request (9) EAP-Message = 0x0225004b1a02250046316d86546d02682c467d806da7600f65070000000000000000e909fed167b345f628d792682860607f350019b3c2b83a3800636772696666696e4075666c2e656475 (9) FreeRADIUS-Proxied-To = 127.0.0.1 (9) User-Name = "username(a)example.org" (9) State = 0x6e3e08c40000013700011700fe800000000000008df64cb7c2d32694000000045f724dfe (9) server proxy-inner-tunnel { (9) session-state: No cached attributes (9) # Executing section authorize from file /opt/freeradius-test/etc/raddb/sites-enabled/proxy-inner-tunnel (9) authorize { (9) update control { (9) &Proxy-To-Realm := "example.org" (9) } # update control = noop (9) } # authorize = noop (9) } # server proxy-inner-tunnel (9) Virtual server sending reply (9) eap_peap: Got tunneled reply code 0 (9) eap_peap: Tunnelled authentication will be proxied to example.org (9) eap: WARNING: Tunneled session will be proxied. Not doing EAP (9) [eap] = handled (9) } # authenticate = handled (9) Starting proxy to home server 127.0.0.1 port 1812 (9) server default { (9) } (9) Proxying request to home server 127.0.0.1 port 1812 timeout 20.000000 (9) Sent Access-Request Id 235 from 0.0.0.0:59393 to 127.0.0.1:1812 length 174 (9) EAP-Message = 0x0225004b1a02250046316d86546d02682c467d806da7600f65070000000000000000e909fed167b345f628d792682860607f350019b3c2b83a3800636772696666696e4075666c2e656475 (9) User-Name = "username(a)example.org" (9) State = 0x6e3e08c40000013700011700fe800000000000008df64cb7c2d32694000000045f724dfe (9) Message-Authenticator = 0x (9) Proxy-State = 0x38 Waking up in 0.3 seconds. (10) Received Access-Request Id 235 from 127.0.0.1:59393 to 127.0.0.1:1812 length 174 (10) EAP-Message = 0x0225004b1a02250046316d86546d02682c467d806da7600f65070000000000000000e909fed167b345f628d792682860607f350019b3c2b83a3800636772696666696e4075666c2e656475 (10) User-Name = "username(a)example.org" (10) State = 0x6e3e08c40000013700011700fe800000000000008df64cb7c2d32694000000045f724dfe (10) Message-Authenticator = 0x2252e6f6a3cc56e21ec1162298e833f4 (10) Proxy-State = 0x38 (10) session-state: No cached attributes (10) # Executing section authorize from file /opt/freeradius-test/etc/raddb/sites-enabled/default (10) authorize { (10) policy filter_username { (10) if (&User-Name) { (10) if (&User-Name) -> TRUE (10) if (&User-Name) { (10) if (&User-Name =~ / /) { (10) if (&User-Name =~ / /) -> FALSE (10) if (&User-Name =~ /@[^@]*@/ ) { (10) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (10) if (&User-Name =~ /\.\./ ) { (10) if (&User-Name =~ /\.\./ ) -> FALSE (10) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (10) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (10) if (&User-Name =~ /\.$/) { (10) if (&User-Name =~ /\.$/) -> FALSE (10) if (&User-Name =~ /(a)\./) { (10) if (&User-Name =~ /(a)\./) -> FALSE (10) } # if (&User-Name) = notfound (10) } # policy filter_username = notfound (10) [preprocess] = ok (10) [chap] = noop (10) [mschap] = noop (10) [digest] = noop (10) suffix: Checking for suffix after "@" (10) suffix: Looking up realm "example.org" for User-Name = " username(a)example.org" (10) suffix: Found realm "example.org" (10) suffix: Adding Realm = "example.org" (10) suffix: Proxying request from user username(a)example.org to realm example.org (10) suffix: Preparing to proxy authentication request to realm "example.org" (10) [suffix] = updated (10) eap: Request is supposed to be proxied to Realm example.org. Not doing EAP. (10) [eap] = noop (10) [files] = noop (10) [expiration] = noop (10) [logintime] = noop (10) [pap] = noop (10) } # authorize = updated (10) Starting proxy to home server 10.6.11.15 port 1812 (10) server default { (10) } (10) Proxying request to home server 10.6.11.15 port 1812 timeout 10.000000 (10) Sent Access-Request Id 59 from 0.0.0.0:59393 to 10.6.11.15:1812 length 191 (10) EAP-Message = 0x0225004b1a02250046316d86546d02682c467d806da7600f65070000000000000000e909fed167b345f628d792682860607f350019b3c2b83a3800636772696666696e4075666c2e656475 (10) User-Name = "username(a)example.org" (10) State = 0x6e3e08c40000013700011700fe800000000000008df64cb7c2d32694000000045f724dfe (10) Message-Authenticator = 0x2252e6f6a3cc56e21ec1162298e833f4 (10) Proxy-State = 0x38 (10) Event-Timestamp = "Aug 10 2022 08:18:59 EDT" (10) NAS-IP-Address = 127.0.0.1 (10) Proxy-State = 0x323335 Waking up in 0.3 seconds. (10) Clearing existing &reply: attributes (10) Received Access-Challenge Id 59 from 10.6.11.15:1812 to 10.6.11.22:59393 length 143 (10) Proxy-State = 0x38 (10) Proxy-State = 0x323335 (10) Session-Timeout = 60 (10) EAP-Message = 0x012600331a0325002e533d46444535443942333830393542413637373242454642363234354444323637313836363836374632 (10) State = 0x6e3e08c40000013700011700fe800000000000008df64cb7c2d32694000000045f724dfe (10) Message-Authenticator = 0x6b8527e1973479a319453417a2c90f42 (10) server default { (10) # Executing section post-proxy from file /opt/freeradius-test/etc/raddb/sites-enabled/default (10) post-proxy { (10) eap: No pre-existing handler found (10) [eap] = noop (10) } # post-proxy = noop (10) } (10) Using Post-Auth-Type Challenge (10) # Executing group from file /opt/freeradius-test/etc/raddb/sites-enabled/default (10) Challenge { ... } # empty sub-section is ignored (10) Sent Access-Challenge Id 235 from 127.0.0.1:1812 to 127.0.0.1:59393 length 138 (10) Session-Timeout = 60 (10) EAP-Message = 0x012600331a0325002e533d46444535443942333830393542413637373242454642363234354444323637313836363836374632 (10) State = 0x6e3e08c40000013700011700fe800000000000008df64cb7c2d32694000000045f724dfe (10) Message-Authenticator = 0x6b8527e1973479a319453417a2c90f42 (10) Proxy-State = 0x38 (10) Finished request Waking up in 0.1 seconds. (9) Clearing existing &reply: attributes (9) Received Access-Challenge Id 235 from 127.0.0.1:1812 to 127.0.0.1:59393 length 138 (9) Session-Timeout = 60 (9) EAP-Message = 0x012600331a0325002e533d46444535443942333830393542413637373242454642363234354444323637313836363836374632 (9) State = 0x6e3e08c40000013700011700fe800000000000008df64cb7c2d32694000000045f724dfe (9) Message-Authenticator = 0xa7a5d80e820957076837a9676974152d (9) Proxy-State = 0x38 (9) server default { (9) # Executing section post-proxy from file /opt/freeradius-test/etc/raddb/sites-enabled/default (9) post-proxy { (9) eap: Doing post-proxy callback (9) eap: Passing reply from proxy back into the tunnel (9) eap: Got tunneled reply RADIUS code 11 (9) eap: Session-Timeout = 60 (9) eap: EAP-Message = 0x012600331a0325002e533d46444535443942333830393542413637373242454642363234354444323637313836363836374632 (9) eap: State = 0x6e3e08c40000013700011700fe800000000000008df64cb7c2d32694000000045f724dfe (9) eap: Message-Authenticator = 0xa7a5d80e820957076837a9676974152d (9) eap: Proxy-State = 0x38 (9) eap: Got tunneled Access-Challenge (9) eap: Reply was handled (9) eap: Sending EAP Request (code 1) ID 38 length 82 (9) eap: EAP session adding &reply:State = 0xe675df6eee53c62e (9) [eap] = ok (9) } # post-proxy = ok (9) } (9) session-state: Saving cached attributes (9) Framed-MTU = 994 (9) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (9) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (9) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (9) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (9) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (9) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange" (9) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished" (9) TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec" (9) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished" (9) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (9) TLS-Session-Version = "TLS 1.2" (9) Using Post-Auth-Type Challenge (9) # Executing group from file /opt/freeradius-test/etc/raddb/sites-enabled/default (9) Challenge { ... } # empty sub-section is ignored (9) Sent Access-Challenge Id 8 from 127.0.0.1:1812 to 127.0.0.1:41445 length 140 (9) EAP-Message = 0x01260052190017030300472054ff1c9b5e54f59cc0dcaebf53e944b82ed1c318ffbc62c980efe461b0d53ad17c41ec8d2ea20cee09c6fd2c291ff46f9f4c6f1c958b4f5bda67798c4c472160325089c9d09d (9) Message-Authenticator = 0x00000000000000000000000000000000 (9) State = 0xe675df6eee53c62e8fcb18675fa52d04 (9) Finished request Waking up in 4.7 seconds. (11) Received Access-Request Id 9 from 127.0.0.1:41445 to 127.0.0.1:1812 length 173 (11) User-Name = "anonymous" (11) NAS-IP-Address = 127.0.0.1 (11) Calling-Station-Id = "02-00-00-00-00-01" (11) Framed-MTU = 1400 (11) NAS-Port-Type = Wireless-802.11 (11) Service-Type = Framed-User (11) Connect-Info = "CONNECT 11Mbps 802.11b" (11) EAP-Message = 0x022600251900170303001ac9186d481dde735bda9d2d9bf418939943eeadac727b51daf83d (11) State = 0xe675df6eee53c62e8fcb18675fa52d04 (11) Message-Authenticator = 0x4369ac0ea166f1c1235fad5555c6b7bf (11) Restoring &session-state (11) &session-state:Framed-MTU = 994 (11) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (11) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (11) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (11) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (11) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (11) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange" (11) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished" (11) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec" (11) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished" (11) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (11) &session-state:TLS-Session-Version = "TLS 1.2" (11) # Executing section authorize from file /opt/freeradius-test/etc/raddb/sites-enabled/default (11) authorize { (11) policy filter_username { (11) if (&User-Name) { (11) if (&User-Name) -> TRUE (11) if (&User-Name) { (11) if (&User-Name =~ / /) { (11) if (&User-Name =~ / /) -> FALSE (11) if (&User-Name =~ /@[^@]*@/ ) { (11) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (11) if (&User-Name =~ /\.\./ ) { (11) if (&User-Name =~ /\.\./ ) -> FALSE (11) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (11) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (11) if (&User-Name =~ /\.$/) { (11) if (&User-Name =~ /\.$/) -> FALSE (11) if (&User-Name =~ /(a)\./) { (11) if (&User-Name =~ /(a)\./) -> FALSE (11) } # if (&User-Name) = notfound (11) } # policy filter_username = notfound (11) [preprocess] = ok (11) [chap] = noop (11) [mschap] = noop (11) [digest] = noop (11) suffix: Checking for suffix after "@" (11) suffix: No '@' in User-Name = "anonymous", looking up realm NULL (11) suffix: No such realm "NULL" (11) [suffix] = noop (11) eap: Peer sent EAP Response (code 2) ID 38 length 37 (11) eap: Continuing tunnel setup (11) [eap] = ok (11) } # authorize = ok (11) Found Auth-Type = eap (11) # Executing group from file /opt/freeradius-test/etc/raddb/sites-enabled/default (11) authenticate { (11) eap: Expiring EAP session with state 0xe675df6eee53c62e (11) eap: Finished EAP session with state 0xe675df6eee53c62e (11) eap: Previous EAP request found for state 0xe675df6eee53c62e, released from the list (11) eap: Peer sent packet with method EAP PEAP (25) (11) eap: Calling submodule eap_peap to process data (11) eap_peap: (TLS) EAP Done initial handshake (11) eap_peap: Session established. Decoding tunneled attributes (11) eap_peap: PEAP state phase2 (11) eap_peap: EAP method MSCHAPv2 (26) (11) eap_peap: Got tunneled request (11) eap_peap: EAP-Message = 0x022600061a03 (11) eap_peap: Setting User-Name to username(a)example.org (11) eap_peap: Sending tunneled request to proxy-inner-tunnel (11) eap_peap: EAP-Message = 0x022600061a03 (11) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (11) eap_peap: User-Name = "username(a)example.org" (11) eap_peap: State = 0x6e3e08c40000013700011700fe800000000000008df64cb7c2d32694000000045f724dfe (11) Virtual server proxy-inner-tunnel received request (11) EAP-Message = 0x022600061a03 (11) FreeRADIUS-Proxied-To = 127.0.0.1 (11) User-Name = "username(a)example.org" (11) State = 0x6e3e08c40000013700011700fe800000000000008df64cb7c2d32694000000045f724dfe (11) server proxy-inner-tunnel { (11) session-state: No cached attributes (11) # Executing section authorize from file /opt/freeradius-test/etc/raddb/sites-enabled/proxy-inner-tunnel (11) authorize { (11) update control { (11) &Proxy-To-Realm := "example.org" (11) } # update control = noop (11) } # authorize = noop (11) } # server proxy-inner-tunnel (11) Virtual server sending reply (11) eap_peap: Got tunneled reply code 0 (11) eap_peap: Tunnelled authentication will be proxied to example.org (11) eap: WARNING: Tunneled session will be proxied. Not doing EAP (11) [eap] = handled (11) } # authenticate = handled (11) Starting proxy to home server 127.0.0.1 port 1812 (11) server default { (11) } (11) Proxying request to home server 127.0.0.1 port 1812 timeout 20.000000 (11) Sent Access-Request Id 27 from 0.0.0.0:59393 to 127.0.0.1:1812 length 105 (11) EAP-Message = 0x022600061a03 (11) User-Name = "username(a)example.org" (11) State = 0x6e3e08c40000013700011700fe800000000000008df64cb7c2d32694000000045f724dfe (11) Message-Authenticator = 0x (11) Proxy-State = 0x39 Waking up in 0.3 seconds. (12) Received Access-Request Id 27 from 127.0.0.1:59393 to 127.0.0.1:1812 length 105 (12) EAP-Message = 0x022600061a03 (12) User-Name = "username(a)example.org" (12) State = 0x6e3e08c40000013700011700fe800000000000008df64cb7c2d32694000000045f724dfe (12) Message-Authenticator = 0x28dbdd5be33bb7040adfddfe8d9352cd (12) Proxy-State = 0x39 (12) session-state: No cached attributes (12) # Executing section authorize from file /opt/freeradius-test/etc/raddb/sites-enabled/default (12) authorize { (12) policy filter_username { (12) if (&User-Name) { (12) if (&User-Name) -> TRUE (12) if (&User-Name) { (12) if (&User-Name =~ / /) { (12) if (&User-Name =~ / /) -> FALSE (12) if (&User-Name =~ /@[^@]*@/ ) { (12) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (12) if (&User-Name =~ /\.\./ ) { (12) if (&User-Name =~ /\.\./ ) -> FALSE (12) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (12) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (12) if (&User-Name =~ /\.$/) { (12) if (&User-Name =~ /\.$/) -> FALSE (12) if (&User-Name =~ /(a)\./) { (12) if (&User-Name =~ /(a)\./) -> FALSE (12) } # if (&User-Name) = notfound (12) } # policy filter_username = notfound (12) [preprocess] = ok (12) [chap] = noop (12) [mschap] = noop (12) [digest] = noop (12) suffix: Checking for suffix after "@" (12) suffix: Looking up realm "example.org" for User-Name = " username(a)example.org" (12) suffix: Found realm "example.org" (12) suffix: Adding Realm = "example.org" (12) suffix: Proxying request from user username(a)example.org to realm example.org (12) suffix: Preparing to proxy authentication request to realm "example.org" (12) [suffix] = updated (12) eap: Request is supposed to be proxied to Realm example.org. Not doing EAP. (12) [eap] = noop (12) [files] = noop (12) [expiration] = noop (12) [logintime] = noop (12) [pap] = noop (12) } # authorize = updated (12) Starting proxy to home server 10.6.11.15 port 1812 (12) server default { (12) } (12) Proxying request to home server 10.6.11.15 port 1812 timeout 10.000000 (12) Sent Access-Request Id 52 from 0.0.0.0:59393 to 10.6.11.15:1812 length 121 (12) EAP-Message = 0x022600061a03 (12) User-Name = "username(a)example.org" (12) State = 0x6e3e08c40000013700011700fe800000000000008df64cb7c2d32694000000045f724dfe (12) Message-Authenticator = 0x28dbdd5be33bb7040adfddfe8d9352cd (12) Proxy-State = 0x39 (12) Event-Timestamp = "Aug 10 2022 08:18:59 EDT" (12) NAS-IP-Address = 127.0.0.1 (12) Proxy-State = 0x3237 Waking up in 0.3 seconds. (12) Clearing existing &reply: attributes (12) Received Access-Accept Id 52 from 10.6.11.15:1812 to 10.6.11.22:59393 length 281 (12) Proxy-State = 0x39 (12) Proxy-State = 0x3237 (12) Framed-Protocol = PPP (12) Service-Type = Framed-User (12) EAP-Message = 0x03260004 (12) Class = 0x9cfe09b000000137000102000a060b0f000000008df64cb7c2d3269401d830f9a2012075000000000006ed48 (12) MS-Link-Utilization-Threshold = 50 (12) MS-Link-Drop-Time-Limit = 120 (12) MS-CHAP-Domain = "\001UFAD" (12) MS-MPPE-Send-Key = 0x10e45324b8c3d2c45a891f6068c60e8e (12) MS-MPPE-Recv-Key = 0xe91ba4c29e258660071f4bfce79d0314 (12) MS-CHAP2-Success = 0x01533d46444535443942333830393542413637373242454642363234354444323637313836363836374632 (12) Message-Authenticator = 0xc89831d91964fd2ed5b22785ef179a2e (12) server default { (12) # Executing section post-proxy from file /opt/freeradius-test/etc/raddb/sites-enabled/default (12) post-proxy { (12) eap: No pre-existing handler found (12) [eap] = noop (12) } # post-proxy = noop (12) } (12) Found Auth-Type = Accept (12) Auth-Type = Accept, accepting the user (12) # Executing section post-auth from file /opt/freeradius-test/etc/raddb/sites-enabled/default (12) post-auth { (12) if (session-state:User-Name && reply:User-Name && request:User-Name && (reply:User-Name == request:User-Name)) { (12) if (session-state:User-Name && reply:User-Name && request:User-Name && (reply:User-Name == request:User-Name)) -> FALSE (12) update { (12) No attributes updated for RHS &session-state: (12) } # update = noop (12) [exec] = noop (12) policy remove_reply_message_if_eap { (12) if (&reply:EAP-Message && &reply:Reply-Message) { (12) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (12) else { (12) [noop] = noop (12) } # else = noop (12) } # policy remove_reply_message_if_eap = noop (12) if (EAP-Key-Name && &reply:EAP-Session-Id) { (12) if (EAP-Key-Name && &reply:EAP-Session-Id) -> FALSE (12) } # post-auth = noop (12) Sent Access-Accept Id 27 from 127.0.0.1:1812 to 127.0.0.1:59393 length 277 (12) Framed-Protocol = PPP (12) Service-Type = Framed-User (12) EAP-Message = 0x03260004 (12) Class = 0x9cfe09b000000137000102000a060b0f000000008df64cb7c2d3269401d830f9a2012075000000000006ed48 (12) MS-Link-Utilization-Threshold = 50 (12) MS-Link-Drop-Time-Limit = 120 (12) MS-CHAP-Domain = "\001UFAD" (12) MS-MPPE-Send-Key = 0x10e45324b8c3d2c45a891f6068c60e8e (12) MS-MPPE-Recv-Key = 0xe91ba4c29e258660071f4bfce79d0314 (12) MS-CHAP2-Success = 0x01533d46444535443942333830393542413637373242454642363234354444323637313836363836374632 (12) Message-Authenticator = 0xc89831d91964fd2ed5b22785ef179a2e (12) Proxy-State = 0x39 (12) Finished request Waking up in 0.3 seconds. (11) Clearing existing &reply: attributes (11) Received Access-Accept Id 27 from 127.0.0.1:1812 to 127.0.0.1:59393 length 277 (11) Framed-Protocol = PPP (11) Service-Type = Framed-User (11) EAP-Message = 0x03260004 (11) Class = 0x9cfe09b000000137000102000a060b0f000000008df64cb7c2d3269401d830f9a2012075000000000006ed48 (11) MS-Link-Utilization-Threshold = 50 (11) MS-Link-Drop-Time-Limit = 120 (11) MS-CHAP-Domain = "\001UFAD" (11) MS-MPPE-Send-Key = 0x10e45324b8c3d2c45a891f6068c60e8e (11) MS-MPPE-Recv-Key = 0xe91ba4c29e258660071f4bfce79d0314 (11) MS-CHAP2-Success = 0x01533d46444535443942333830393542413637373242454642363234354444323637313836363836374632 (11) Message-Authenticator = 0xde8fa57b092b483a7be18b2d1893aa40 (11) Proxy-State = 0x39 (11) server default { (11) # Executing section post-proxy from file /opt/freeradius-test/etc/raddb/sites-enabled/default (11) post-proxy { (11) eap: Doing post-proxy callback (11) eap: Passing reply from proxy back into the tunnel (11) eap: Got tunneled reply RADIUS code 2 (11) eap: Framed-Protocol = PPP (11) eap: Service-Type = Framed-User (11) eap: EAP-Message = 0x03260004 (11) eap: Class = 0x9cfe09b000000137000102000a060b0f000000008df64cb7c2d3269401d830f9a2012075000000000006ed48 (11) eap: MS-Link-Utilization-Threshold = 50 (11) eap: MS-Link-Drop-Time-Limit = 120 (11) eap: MS-CHAP-Domain = "\001UFAD" (11) eap: MS-MPPE-Send-Key = 0x10e45324b8c3d2c45a891f6068c60e8e (11) eap: MS-MPPE-Recv-Key = 0xe91ba4c29e258660071f4bfce79d0314 (11) eap: MS-CHAP2-Success = 0x01533d46444535443942333830393542413637373242454642363234354444323637313836363836374632 (11) eap: Message-Authenticator = 0xde8fa57b092b483a7be18b2d1893aa40 (11) eap: Proxy-State = 0x39 (11) eap: Tunneled authentication was successful (11) eap: SUCCESS (11) eap: Reply was handled (11) eap: Sending EAP Request (code 1) ID 39 length 46 (11) eap: EAP session adding &reply:State = 0xe675df6eef52c62e (11) [eap] = ok (11) } # post-proxy = ok (11) } (11) session-state: Saving cached attributes (11) Framed-MTU = 994 (11) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (11) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (11) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (11) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (11) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (11) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange" (11) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished" (11) TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec" (11) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished" (11) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (11) TLS-Session-Version = "TLS 1.2" (11) Using Post-Auth-Type Challenge (11) # Executing group from file /opt/freeradius-test/etc/raddb/sites-enabled/default (11) Challenge { ... } # empty sub-section is ignored (11) Sent Access-Challenge Id 9 from 127.0.0.1:1812 to 127.0.0.1:41445 length 104 (11) EAP-Message = 0x0127002e190017030300232054ff1c9b5e54f65a96c6f9c26f4368dea611f63dd222bbc75a6489e3787981c6c053 (11) Message-Authenticator = 0x00000000000000000000000000000000 (11) State = 0xe675df6eef52c62e8fcb18675fa52d04 (11) Finished request Waking up in 4.7 seconds. (13) Received Access-Request Id 10 from 127.0.0.1:41445 to 127.0.0.1:1812 length 182 (13) User-Name = "anonymous" (13) NAS-IP-Address = 127.0.0.1 (13) Calling-Station-Id = "02-00-00-00-00-01" (13) Framed-MTU = 1400 (13) NAS-Port-Type = Wireless-802.11 (13) Service-Type = Framed-User (13) Connect-Info = "CONNECT 11Mbps 802.11b" (13) EAP-Message = 0x0227002e19001703030023c9186d481dde735c252cdf5e4f904d6191485ee65d136156c4a980ed966e9fc425cbd7 (13) State = 0xe675df6eef52c62e8fcb18675fa52d04 (13) Message-Authenticator = 0x1d9975ec3f07b5971e779a3aaa8d0a4d (13) Restoring &session-state (13) &session-state:Framed-MTU = 994 (13) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (13) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (13) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (13) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (13) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (13) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange" (13) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished" (13) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec" (13) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished" (13) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (13) &session-state:TLS-Session-Version = "TLS 1.2" (13) # Executing section authorize from file /opt/freeradius-test/etc/raddb/sites-enabled/default (13) authorize { (13) policy filter_username { (13) if (&User-Name) { (13) if (&User-Name) -> TRUE (13) if (&User-Name) { (13) if (&User-Name =~ / /) { (13) if (&User-Name =~ / /) -> FALSE (13) if (&User-Name =~ /@[^@]*@/ ) { (13) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (13) if (&User-Name =~ /\.\./ ) { (13) if (&User-Name =~ /\.\./ ) -> FALSE (13) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (13) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (13) if (&User-Name =~ /\.$/) { (13) if (&User-Name =~ /\.$/) -> FALSE (13) if (&User-Name =~ /(a)\./) { (13) if (&User-Name =~ /(a)\./) -> FALSE (13) } # if (&User-Name) = notfound (13) } # policy filter_username = notfound (13) [preprocess] = ok (13) [chap] = noop (13) [mschap] = noop (13) [digest] = noop (13) suffix: Checking for suffix after "@" (13) suffix: No '@' in User-Name = "anonymous", looking up realm NULL (13) suffix: No such realm "NULL" (13) [suffix] = noop (13) eap: Peer sent EAP Response (code 2) ID 39 length 46 (13) eap: Continuing tunnel setup (13) [eap] = ok (13) } # authorize = ok (13) Found Auth-Type = eap (13) # Executing group from file /opt/freeradius-test/etc/raddb/sites-enabled/default (13) authenticate { (13) eap: Expiring EAP session with state 0xe675df6eef52c62e (13) eap: Finished EAP session with state 0xe675df6eef52c62e (13) eap: Previous EAP request found for state 0xe675df6eef52c62e, released from the list (13) eap: Peer sent packet with method EAP PEAP (25) (13) eap: Calling submodule eap_peap to process data (13) eap_peap: (TLS) EAP Done initial handshake (13) eap_peap: Session established. Decoding tunneled attributes (13) eap_peap: PEAP state send tlv success (13) eap_peap: Received EAP-TLV response (13) eap_peap: Success (13) eap: Sending EAP Success (code 3) ID 39 length 4 (13) eap: Freeing handler (13) [eap] = ok (13) } # authenticate = ok (13) # Executing section post-auth from file /opt/freeradius-test/etc/raddb/sites-enabled/default (13) post-auth { (13) if (session-state:User-Name && reply:User-Name && request:User-Name && (reply:User-Name == request:User-Name)) { (13) if (session-state:User-Name && reply:User-Name && request:User-Name && (reply:User-Name == request:User-Name)) -> FALSE (13) update { (13) &reply::Framed-MTU += &session-state:Framed-MTU[*] -> 994 (13) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) recv TLS 1.3 Handshake, ClientHello' (13) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) send TLS 1.2 Handshake, ServerHello' (13) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) send TLS 1.2 Handshake, Certificate' (13) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) send TLS 1.2 Handshake, ServerKeyExchange' (13) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) send TLS 1.2 Handshake, ServerHelloDone' (13) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) recv TLS 1.2 Handshake, ClientKeyExchange' (13) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) recv TLS 1.2 Handshake, Finished' (13) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) send TLS 1.2 ChangeCipherSpec' (13) &reply::TLS-Session-Information += &session-state:TLS-Session-Information[*] -> '(TLS) send TLS 1.2 Handshake, Finished' (13) &reply::TLS-Session-Cipher-Suite += &session-state:TLS-Session-Cipher-Suite[*] -> 'ECDHE-RSA-AES256-GCM-SHA384' (13) &reply::TLS-Session-Version += &session-state:TLS-Session-Version[*] -> 'TLS 1.2' (13) } # update = noop (13) [exec] = noop (13) policy remove_reply_message_if_eap { (13) if (&reply:EAP-Message && &reply:Reply-Message) { (13) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (13) else { (13) [noop] = noop (13) } # else = noop (13) } # policy remove_reply_message_if_eap = noop (13) if (EAP-Key-Name && &reply:EAP-Session-Id) { (13) if (EAP-Key-Name && &reply:EAP-Session-Id) -> FALSE (13) } # post-auth = noop (13) Sent Access-Accept Id 10 from 127.0.0.1:1812 to 127.0.0.1:41445 length 177 (13) MS-MPPE-Recv-Key = 0x62648fa7a7f83a26511884879c34872597bf15b27f0fe7c0e8b9426e2de1e5b4 (13) MS-MPPE-Send-Key = 0x9e1e4d2c8aede721a947dfc545f44960236c983e73f6883659db7ddf618c46fc (13) EAP-Message = 0x03270004 (13) Message-Authenticator = 0x00000000000000000000000000000000 (13) User-Name = "anonymous" (13) Framed-MTU += 994 (13) Finished request Waking up in 4.7 seconds. (0) Cleaning up request packet ID 0 with timestamp +3 due to cleanup_delay was reached (1) Cleaning up request packet ID 1 with timestamp +3 due to cleanup_delay was reached (2) Cleaning up request packet ID 2 with timestamp +3 due to cleanup_delay was reached (3) Cleaning up request packet ID 3 with timestamp +3 due to cleanup_delay was reached (4) Cleaning up request packet ID 4 with timestamp +3 due to cleanup_delay was reached (5) Cleaning up request packet ID 5 with timestamp +3 due to cleanup_delay was reached (6) Cleaning up request packet ID 6 with timestamp +3 due to cleanup_delay was reached (8) Cleaning up request packet ID 221 with timestamp +3 due to cleanup_delay was reached (7) Cleaning up request packet ID 7 with timestamp +3 due to cleanup_delay was reached Waking up in 0.1 seconds. (10) Cleaning up request packet ID 235 with timestamp +3 due to cleanup_delay was reached (9) Cleaning up request packet ID 8 with timestamp +3 due to cleanup_delay was reached (12) Cleaning up request packet ID 27 with timestamp +3 due to cleanup_delay was reached (11) Cleaning up request packet ID 9 with timestamp +3 due to cleanup_delay was reached (13) Cleaning up request packet ID 10 with timestamp +3 due to cleanup_delay was reached Ready to process requests ============================================== I don't see post-auth being called from proxy-inner-tunnel. Is there any trick that I missed to get it to run? Thanks! Chris

2 7

Apple devices and anonymous identity EAP-TLS
by work vlpl 16 Aug '22

16 Aug '22

Hi, I apologize in advance I know that this is not a question about freeradius server, but here I think I have a better chance to find the answer. I need to check the realm of incoming radius requests and I have setup with EAP-TLS. Android provide a way to specify the anonymous identity and include into it realm value but Apple devices seem to use CN field from cert as username and as anonymous username. So I just want to check with a community that I am correct in my observation that Apple devices use CN as an anonymous identity. Maybe someone can confirm it. Apple documentation saying next about anonymous identity. --- "Optional. This key is only relevant to TTLS, PEAP, and EAP-FAST. This allows the user to hide his or her identity. The userʼs actual name appears only inside the encrypted tunnel. For example, it could be set to ”anonymous” or ”anon”, or ”anon(a)mycompany.xn--net-9o0a. It can increase security because an attacker canʼt see the authenticating userʼs name in the clear. " --- Best regards Vladimir

2 1

Exec Program
by mohamed almeshal 14 Aug '22

14 Aug '22

Dear Savers ... I got this error in my debug the php program check something and return 0 for true and -1 for false and the php code work fine but the I don't understand what to echo back or return to freeradius to understand the situation I try to echo and not echo when I echo the value it pass like this so what is the best way to do such a thing (2) update control { (2) Executing: /usr/bin/php -f /opt/ajrass/egy-radius-cloud/freeradius/exec/dns.php: (2) Program returned code (0) and output ''1" (2) Tmp-Integer-0 := 0 (2) } # update control = noop (2) if (Tmp-Integer-0 < 0 ){ (2) ERROR: Failed retrieving values required to evaluate condition (2) } # policy call_dns = noop Mohammed

2 1

Re: FreeRADIUS fails to include attributes in response to a Juniper switch
by White, Daniel E. (GSFC-770.0)[AEGIS] 12 Aug '22

12 Aug '22

On Aug 11, 2022, at 9:27 AM, White, Daniel E. (GSFC-770.0)[AEGIS] via Freeradius-Users <freeradius-users(a)lists.freeradius.org<mailto:freeradius-users@lists.freeradius.org>> wrote: I tried commenting it out. Same failure. I suggest reading the documentation instead of trying random things. And paying attention to what you're doing. Your "users" file entries are mostly wrong. # DEFAULT Auth-Type := ntlm_auth bobb Cleartext-Password := "hello" Typo in "bobb". This doesn't affect anything, but it's still a typo. Not a typo. I used a different name. DEFAULT LDAP-Group == "CN=engineer,OU=Network,OU=USERS1,DC=dc1,DC=dc2,DC=dc3,DC=dc4" This matches the LDAP group, and then... does nothing. See the documentation for the "users" file, and look for reply attributes. Looking at the man page for users, I now see what you are referring to. i.e. Why doesn't it send any reply attributes when I don't put reply attributes in the users file?" That question answers itself. So... put reply attributes here. As done in the other examples. As the documentation says. I am following what was previously done on Cistron RADIUS DEFAULT Framed-Protocol == PPP Framed-Protocol = PPP, Framed-Compression = Van-Jacobson-TCP-IP Old and not necessary. Delete it. It is in the default file from freeradius.x86_64 3.0.20-12.module+el8.6.0+13617+542eca26 @rhel-8-for-x86_64-appstream-rpms DEFAULT Hint == "CSLIP" Framed-Protocol = SLIP, Framed-Compression = Van-Jacobson-TCP-IP Old and not necessary. Delete it. It is in the default file from freeradius.x86_64 3.0.20-12.module+el8.6.0+13617+542eca26 @rhel-8-for-x86_64-appstream-rpms DEFAULT Hint == "SLIP" Framed-Protocol = SLIP Old and not necessary. Delete it. It is in the default file from freeradius.x86_64 3.0.20-12.module+el8.6.0+13617+542eca26 @rhel-8-for-x86_64-appstream-rpms DEFAULT Group-Name = "CN=engineer,OU=Network,OU=USERS1,DC=dc1,DC=dc2,DC=dc3,DC=dc4" Juniper-Local-User-Name = "remote-nocengr", Service-Type = Login-User, Fall-Through = No Why "Group-Name", and not "LDAP-Group"? DEFAULT Group = "CN=engineer,OU=Network,OU=USERS1,DC=dc1,DC=dc2,DC=dc3,DC=dc4" Juniper-Local-User-Name = "remote-nocengr", Service-Type = Login-User, Fall-Through = Yes Why "Group", and not "LDAP-Group"? The documentation makes it clear that "Group" and "Group-Name" is for unix group checking. And the main difference between the last two entires is that one has "Fall-Through = yes", and the other has "Fall-Through = no". You're randomly using "LDAP-Group", "Group", and "Group-Name" as synonyms. They're not. You're randomly adding reply attributes to some users file entries, and then not to others. Please be more specific as to “the documentation”. I found “LDAP-Group", "Group", and "Group-Name" referenced in dictionary.freeradius.internal but without any explanation. This looks like you're just trying a bunch of things by mashing at the keyboard, and not paying attention to details. It helps rather a lot to read the docs, to pay attention to details, and to take a careful approach to making changes. Where is the documentation about adding VSA’s to the RADIUS response, please ?

2 1

FreeRADIUS fails to include attributes in response to a Juniper switch
by White, Daniel E. (GSFC-770.0)[AEGIS] 11 Aug '22

11 Aug '22

Trying to talk to a Juniper Switch: FreeRADIUS says the credentials are OK, but the switch needs a response that includes attributes I am copying configuration from an ancient Cistron RADIUS server that I am trying to replace. The necessary attribute, Juniper-Local-User-Name, is specified in the users file, but it is not included in the response from FR to the device. What am I missing, please ? Is this a vendor-specific attribute or VSA ? ------------------------------------- /etc/raddb/users : # DEFAULT Auth-Type := ntlm_auth bobb Cleartext-Password := "hello" DEFAULT LDAP-Group == "CN=engineer,OU=Network,OU=USERS1,DC=dc1,DC=dc2,DC=dc3,DC=dc4" DEFAULT Framed-Protocol == PPP Framed-Protocol = PPP, Framed-Compression = Van-Jacobson-TCP-IP DEFAULT Hint == "CSLIP" Framed-Protocol = SLIP, Framed-Compression = Van-Jacobson-TCP-IP DEFAULT Hint == "SLIP" Framed-Protocol = SLIP DEFAULT Group-Name = "CN=engineer,OU=Network,OU=USERS1,DC=dc1,DC=dc2,DC=dc3,DC=dc4" Juniper-Local-User-Name = "remote-nocengr", Service-Type = Login-User, Fall-Through = No DEFAULT Group = "CN=engineer,OU=Network,OU=USERS1,DC=dc1,DC=dc2,DC=dc3,DC=dc4" Juniper-Local-User-Name = "remote-nocengr", Service-Type = Login-User, Fall-Through = Yes ------------------------------------- /etc/raddb/clients.conf : client localhost { ipaddr = 127.0.0.1 proto = * secret = testing123 require_message_authenticator = no limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 secret = testing123 } client juniper-switch-01 { ipaddr = JUNIPER_SWITCH_IP nas_types = juniper secret = Simple123 } ------------------------------------- [userlogin@SSH_FROM ~]$ ssh JUNIPER_SWITCH_IP Password: Received disconnect from JUNIPER_SWITCH_IP port 22:2: Too many password failures for userlogin Authentication failed. ------------------------------------- radiusd -X output: FreeRADIUS Version 3.0.20 Copyright (C) 1999-2019 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/raddb/dictionary including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/mods-enabled/ including configuration file /etc/raddb/mods-enabled/always including configuration file /etc/raddb/mods-enabled/attr_filter including configuration file /etc/raddb/mods-enabled/cache_eap including configuration file /etc/raddb/mods-enabled/chap including configuration file /etc/raddb/mods-enabled/date including configuration file /etc/raddb/mods-enabled/detail including configuration file /etc/raddb/mods-enabled/detail.log including configuration file /etc/raddb/mods-enabled/digest including configuration file /etc/raddb/mods-enabled/dynamic_clients including configuration file /etc/raddb/mods-enabled/eap including configuration file /etc/raddb/mods-enabled/echo including configuration file /etc/raddb/mods-enabled/exec including configuration file /etc/raddb/mods-enabled/expiration including configuration file /etc/raddb/mods-enabled/expr including configuration file /etc/raddb/mods-enabled/files including configuration file /etc/raddb/mods-enabled/linelog including configuration file /etc/raddb/mods-enabled/logintime including configuration file /etc/raddb/mods-enabled/mschap including configuration file /etc/raddb/mods-enabled/ntlm_auth including configuration file /etc/raddb/mods-enabled/pap including configuration file /etc/raddb/mods-enabled/passwd including configuration file /etc/raddb/mods-enabled/preprocess including configuration file /etc/raddb/mods-enabled/radutmp including configuration file /etc/raddb/mods-enabled/realm including configuration file /etc/raddb/mods-enabled/replicate including configuration file /etc/raddb/mods-enabled/soh including configuration file /etc/raddb/mods-enabled/sradutmp including configuration file /etc/raddb/mods-enabled/unix including configuration file /etc/raddb/mods-enabled/unpack including configuration file /etc/raddb/mods-enabled/utf8 including configuration file /etc/raddb/mods-enabled/ldap including files in directory /etc/raddb/policy.d/ including configuration file /etc/raddb/policy.d/accounting including configuration file /etc/raddb/policy.d/canonicalization including configuration file /etc/raddb/policy.d/control including configuration file /etc/raddb/policy.d/cui including configuration file /etc/raddb/policy.d/debug including configuration file /etc/raddb/policy.d/dhcp including configuration file /etc/raddb/policy.d/eap including configuration file /etc/raddb/policy.d/filter including configuration file /etc/raddb/policy.d/operator-name including configuration file /etc/raddb/policy.d/rfc7542 including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/inner-tunnel main { security { user = "radiusd" group = "radiusd" allow_core_dumps = no } name = "radiusd" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" } main { name = "radiusd" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" libdir = "/usr/lib64/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client nm-gsf14-x16b { ipaddr = JUNIPER_SWITCH_IP require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = ntlm_auth # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Auth-Type = LDAP # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_always # Loading module "reject" from file /etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_chap # Loading module "chap" from file /etc/raddb/mods-enabled/chap # Loaded module rlm_date # Loading module "date" from file /etc/raddb/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" utc = no } # Loading module "wispr2date" from file /etc/raddb/mods-enabled/date date wispr2date { format = "%Y-%m-%dT%H:%M:%S" utc = no } # Loaded module rlm_detail # Loading module "detail" from file /etc/raddb/mods-enabled/detail detail { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "auth_log" from file /etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_digest # Loading module "digest" from file /etc/raddb/mods-enabled/digest # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_eap # Loading module "eap" from file /etc/raddb/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_exec # Loading module "echo" from file /etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loading module "exec" from file /etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/raddb/mods-enabled/expiration # Loaded module rlm_expr # Loading module "expr" from file /etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_files # Loading module "files" from file /etc/raddb/mods-enabled/files files { filename = "/etc/raddb/mods-config/files/authorize" acctusersfile = "/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy" } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/raddb/mods-enabled/linelog linelog { filename = "/var/log/radius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/var/log/radius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes ntlm_auth = "/bin/ntlm_auth --request-nt-key --allow-mschapv2 --username=%{mschap:User-Name:-None} --domain=%{%{mschap:NT-Domain}:-MY.DOMAIN.TLD} --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}" passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loading module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/bin/ntlm_auth --request-nt-key --domain=MY.DOMAIN.TLD --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_pap # Loading module "pap" from file /etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups" hints = "/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "bangpath" from file /etc/raddb/mods-enabled/realm realm bangpath { format = "prefix" delimiter = "!" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/raddb/mods-enabled/replicate # Loaded module rlm_soh # Loading module "soh" from file /etc/raddb/mods-enabled/soh soh { dhcp = yes } # Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_unix # Loading module "unix" from file /etc/raddb/mods-enabled/unix unix { radwtmp = "/var/log/radius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_unpack # Loading module "unpack" from file /etc/raddb/mods-enabled/unpack # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/raddb/mods-enabled/utf8 # Loaded module rlm_ldap # Loading module "ldap" from file /etc/raddb/mods-enabled/ldap ldap { server = "AD-DC-1_IP" port = 389 identity = "SERVICE_ACCOUNT" password = <<< secret >>> sasl { } user_dn = "LDAP-UserDn" user { scope = "sub" access_positive = yes sasl { } } group { filter = "(objectClass=group)" scope = "sub" name_attribute = "cn" membership_attribute = "memberOf" membership_filter = "(|(member=%{control:LDAP-UserDn})(memberUid=%{%{Stripped-User-Name}:-%{User-Name}}))" cacheable_name = no cacheable_dn = yes allow_dangling_group_ref = no } client { filter = "(objectClass=radiusClient)" scope = "sub" base_dn = "OU=USERS1,DC=dc1,DC=dc2,DC=dc3,DC=dc4" } profile { } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 1 res_timeout = 10 srv_timelimit = 3 idle = 60 probes = 3 interval = 3 } tls { start_tls = no } } Creating attribute LDAP-Group instantiate { } # Instantiating module "reject" from file /etc/raddb/mods-enabled/always # Instantiating module "fail" from file /etc/raddb/mods-enabled/always # Instantiating module "ok" from file /etc/raddb/mods-enabled/always # Instantiating module "handled" from file /etc/raddb/mods-enabled/always # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always # Instantiating module "noop" from file /etc/raddb/mods-enabled/always # Instantiating module "updated" from file /etc/raddb/mods-enabled/always # Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response # Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/raddb/certs" pem_file_type = yes private_key_file = "/etc/raddb/certs/server.pem" certificate_file = "/etc/raddb/certs/server.pem" ca_file = "/etc/raddb/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/raddb/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "PROFILE=SYSTEM" cipher_server_preference = no ecdh_curve = "prime256v1" tls_max_version = "1.2" tls_min_version = "1.2" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "expiration" from file /etc/raddb/mods-enabled/expiration # Instantiating module "files" from file /etc/raddb/mods-enabled/files reading pairlist file /etc/raddb/mods-config/files/authorize reading pairlist file /etc/raddb/mods-config/files/accounting reading pairlist file /etc/raddb/mods-config/files/pre-proxy # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog # Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap rlm_mschap (mschap): authenticating by calling 'ntlm_auth' # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap # Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "preprocess" from file /etc/raddb/mods-enabled/preprocess reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /etc/raddb/mods-config/preprocess/hints # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm # Instantiating module "bangpath" from file /etc/raddb/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm # Instantiating module "ldap" from file /etc/raddb/mods-enabled/ldap rlm_ldap: libldap vendor: OpenLDAP, version: 20446 accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } rlm_ldap (ldap): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldap://AD-DC-1_IP:389 ldap://AD-DC-2_IP:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots used rlm_ldap (ldap): Connecting to ldap://AD-DC-1_IP:389 ldap://AD-DC-2_IP:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots used rlm_ldap (ldap): Connecting to ldap://AD-DC-1_IP:389 ldap://AD-DC-2_IP:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots used rlm_ldap (ldap): Connecting to ldap://AD-DC-1_IP:389 ldap://AD-DC-2_IP:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots used rlm_ldap (ldap): Connecting to ldap://AD-DC-1_IP:389 ldap://AD-DC-2_IP:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/raddb/radiusd.conf } # server server default { # from file /etc/raddb/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on proxy address * port 50293 Ready to process requests (0) Received Access-Request Id 159 from JUNIPER_SWITCH_IP:50002 to RADIUS_SERVER_IP:1812 length 89 (0) User-Name = "userlogin" (0) User-Password = "XXXXXXXXXXXXXXX" (0) NAS-Identifier = "juniper-switch-01" (0) Calling-Station-Id = "SSH_FROM_IP" (0) NAS-IP-Address = JUNIPER_SWITCH_IP (0) # Executing section authorize from file /etc/raddb/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "userlogin", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: No EAP-Message, not doing EAP (0) [eap] = noop (0) files: Searching for user in group "CN=engineer,OU=Network,OU=USERS1,DC=dc1,DC=dc2,DC=dc3,DC=dc4" rlm_ldap (ldap): Reserved connection (0) (0) files: EXPAND (sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}}) (0) files: --> (sAMAccountName=userlogin) (0) files: Performing search in "OU=USERS1,DC=dc1,DC=dc2,DC=dc3,DC=dc4" with filter "(sAMAccountName=userlogin)", scope "sub" (0) files: Waiting for search result... (0) files: User object found at DN "CN=User Login,OU=Systems,OU=USERS1,DC=dc1,DC=dc2,DC=dc3,DC=dc4" (0) files: Checking for user in group objects (0) files: EXPAND (&(objectClass=group)(|(member=%{control:LDAP-UserDn})(memberUid=%{%{Stripped-User-Name}:-%{User-Name}}))) (0) files: --> (&(objectClass=group)(|(member=CN\3dUser Login\2cOU\3dSystems\2cOU\3dUSERS1\2cDC\3ddc1\2cDC\3ddc2\2cDC\3ddc3\2cDC\3ddc4)(memberUid=userlogin))) (0) files: Performing search in "CN=engineer,OU=Network,OU=USERS1,DC=dc1,DC=dc2,DC=dc3,DC=dc4" with filter "(&(objectClass=group)(|(member=CN\3dUser Login\2cOU\3dSystems\2cOU\3dUSERS1\2cDC\3ddc1\2cDC\3ddc2\2cDC\3ddc3\2cDC\3ddc4)(memberUid=userlogin)))", scope "sub" (0) files: Waiting for search result... (0) files: User found in group object "CN=engineer,OU=Network,OU=USERS1,DC=dc1,DC=dc2,DC=dc3,DC=dc4" rlm_ldap (ldap): Released connection (0) Need 5 more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots used rlm_ldap (ldap): Connecting to ldap://AD-DC-1_IP:389 ldap://AD-DC-2_IP:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (0) files: users: Matched entry DEFAULT at line 5 (0) [files] = ok rlm_ldap (ldap): Reserved connection (1) (0) ldap: EXPAND (sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}}) (0) ldap: --> (sAMAccountName=userlogin) (0) ldap: Performing search in "OU=USERS1,DC=dc1,DC=dc2,DC=dc3,DC=dc4" with filter "(sAMAccountName=userlogin)", scope "sub" (0) ldap: Waiting for search result... (0) ldap: User object found at DN "CN=User Login,OU=Systems,OU=USERS1,DC=dc1,DC=dc2,DC=dc3,DC=dc4" (0) ldap: Adding cacheable user object memberships (0) ldap: &control:LDAP-Group += "CN=engineer,OU=Network,OU=USERS1,DC=dc1,DC=dc2,DC=dc3,DC=dc4" (0) ldap: &control:LDAP-Group += "CN=…" (0) ldap: &control:LDAP-Group += "CN=…" (0) ldap: &control:LDAP-Group += "CN=…" (0) ldap: &control:LDAP-Group += "CN=…" (0) ldap: &control:LDAP-Group += "CN=…" (0) ldap: &control:LDAP-Group += "CN=…" (0) ldap: &control:LDAP-Group += "CN=…" (0) ldap: &control:LDAP-Group += "CN=…" (0) ldap: EXPAND (&(objectClass=group)(|(member=%{control:LDAP-UserDn})(memberUid=%{%{Stripped-User-Name}:-%{User-Name}}))) (0) ldap: --> (&(objectClass=group)(|(member=CN\3dUser Login\2cOU\3dSystems\2cOU\3dUSERS1\2cDC\3ddc1\2cDC\3ddc2\2cDC\3ddc3\2cDC\3ddc4)(memberUid=userlogin))) (0) ldap: Performing search in "OU=USERS1,DC=dc1,DC=dc2,DC=dc3,DC=dc4" with filter "(&(objectClass=group)(|(member=CN\3dUser Login\2cOU\3dSystems\2cOU\3dUSERS1\2cDC\3ddc1\2cDC\3ddc2\2cDC\3ddc3\2cDC\3ddc4)(memberUid=userlogin)))", scope "sub" (0) ldap: Waiting for search result... (0) ldap: Adding cacheable group object memberships (0) ldap: &control:LDAP-Group += "CN=…" (0) ldap: &control:LDAP-Group += "CN=…" (0) ldap: &control:LDAP-Group += "CN=…" (0) ldap: &control:LDAP-Group += "CN=…" (0) ldap: &control:LDAP-Group += "CN=engineer,OU=Network,OU=USERS1,DC=dc1,DC=dc2,DC=dc3,DC=dc4" (0) ldap: Processing user attributes (0) ldap: WARNING: No "known good" password added. Ensure the admin user has permission to read the password attribute (0) ldap: WARNING: PAP authentication will *NOT* work with Active Directory (if that is what you were trying to configure) rlm_ldap (ldap): Released connection (1) (0) [ldap] = ok (0) if ((ok|| updated) && User-Password) { (0) if ((ok|| updated) && User-Password) -> TRUE (0) if ((ok|| updated) && User-Password) { (0) update { (0) control:Auth-Type := LDAP (0) } # update = noop (0) } # if ((ok|| updated) && User-Password) = noop (0) [expiration] = noop (0) [logintime] = noop Not doing PAP as Auth-Type is already set. (0) [pap] = noop (0) } # authorize = ok (0) Found Auth-Type = LDAP (0) # Executing group from file /etc/raddb/sites-enabled/default (0) Auth-Type LDAP { rlm_ldap (ldap): Reserved connection (2) (0) ldap: Login attempt by "userlogin" (0) ldap: Using user DN from request "CN=User Login,OU=Systems,OU=USERS1,DC=dc1,DC=dc2,DC=dc3,DC=dc4" (0) ldap: Waiting for bind result... (0) ldap: Bind successful (0) ldap: Bind as user "CN=User Login,OU=Systems,OU=USERS1,DC=dc1,DC=dc2,DC=dc3,DC=dc4" was successful rlm_ldap (ldap): Released connection (2) (0) [ldap] = ok (0) } # Auth-Type LDAP = ok (0) # Executing section post-auth from file /etc/raddb/sites-enabled/default (0) post-auth { (0) if (LDAP-Group == "CN=engineer,OU=Network,OU=USERS1,DC=dc1,DC=dc2,DC=dc3,DC=dc4" ) { (0) Searching for user in group "CN=engineer,OU=Network,OU=USERS1,DC=dc1,DC=dc2,DC=dc3,DC=dc4" (0) User found. Matched cached membership (0) if (LDAP-Group == "CN=engineer,OU=Network,OU=USERS1,DC=dc1,DC=dc2,DC=dc3,DC=dc4" ) -> TRUE (0) if (LDAP-Group == "CN=engineer,OU=Network,OU=USERS1,DC=dc1,DC=dc2,DC=dc3,DC=dc4" ) { (0) update reply { (0) EXPAND %{control:LDAP-Group} (0) --> CN=engineer,OU=Network,OU=USERS1,DC=dc1,DC=dc2,DC=dc3,DC=dc4 (0) Reply-Message := CN=engineer,OU=Network,OU=USERS1,DC=dc1,DC=dc2,DC=dc3,DC=dc4 (0) } # update reply = noop (0) } # if (LDAP-Group == "CN=engineer,OU=Network,OU=USERS1,DC=dc1,DC=dc2,DC=dc3,DC=dc4" ) = noop (0) if (session-state:User-Name && reply:User-Name && request:User-Name && (reply:User-Name == request:User-Name)) { (0) if (session-state:User-Name && reply:User-Name && request:User-Name && (reply:User-Name == request:User-Name)) -> FALSE (0) update { (0) No attributes updated for RHS &session-state: (0) } # update = noop (0) [exec] = noop (0) policy remove_reply_message_if_eap { (0) if (&reply:EAP-Message && &reply:Reply-Message) { (0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (0) else { (0) [noop] = noop (0) } # else = noop (0) } # policy remove_reply_message_if_eap = noop (0) } # post-auth = noop (0) Sent Access-Accept Id 159 from RADIUS_SERVER_IP:1812 to JUNIPER_SWITCH_IP:50002 length 0 (0) Reply-Message := "CN=engineer,OU=Network,OU=USERS1,DC=dc1,DC=dc2,DC=dc3,DC=dc4" (0) Finished request Waking up in 4.9 seconds. (0) Cleaning up request packet ID 159 with timestamp +9 Ready to process requests

3 3

eap-ttls with challenge-response
by zolty 10 Aug '22

10 Aug '22

Hi, I've got working 2 factor (challenge-response) authentication by rlm_perl module (https://github.com/LinOTP/linotp-auth-freeradius-perl) I'm trying to secure this communication within tunnel (EAP-TTLS), but it ends with a message: No tunneled reply was found for request. If I disable challenge-response while using EAP-TTLS it works like a charm - Auth-Type linotp2 ends with ok state, and sends Access-Accept through tunnel. I've got no idea why it's not working with Access-Challenge reply and I think I've already tried every possible setup. This is my ttls config: ttls { tls = "tls-common" default_eap_type = "gtc" copy_request_to_tunnel = yes use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } and debug output: (5) perl: &request:User-Password = $RAD_REQUEST{'User-Password'} -> 'password' (5) perl: &request:User-Name = $RAD_REQUEST{'User-Name'} -> 'username' (5) perl: &request:Framed-MTU = $RAD_REQUEST{'Framed-MTU'} -> '1200' (5) perl: ERROR: Failed to create pair - failed to parse time string "sie 10 2022 11:23:48 CEST" (5) perl: ERROR: &request:Event-Timestamp = $RAD_REQUEST{'Event-Timestamp'} -> 'sie 10 2022 11:23:48 CEST' (5) perl: &request:Framed-IP-Address = $RAD_REQUEST{'Framed-IP-Address'} -> 'some_IP' (5) perl: &request:Service-Type = $RAD_REQUEST{'Service-Type'} -> 'Framed-User' (5) perl: &request:NAS-Identifier = $RAD_REQUEST{'NAS-Identifier'} -> 'linotp' (5) perl: &request:FreeRADIUS-Proxied-To = $RAD_REQUEST{'FreeRADIUS-Proxied-To'} -> '127.0.0.1' (5) perl: &request:NAS-IP-Address = $RAD_REQUEST{'NAS-IP-Address'} -> 'some_IP' (5) perl: &reply:State = $RAD_REPLY{'State'} -> '81561830980360' (5) perl: &reply:Reply-Message = $RAD_REPLY{'Reply-Message'} -> 'Multiple challenges submitted.' (5) perl: &control:Response-Packet-Type = $RAD_CHECK{'Response-Packet-Type'} -> 'Access-Challenge' (5) perl: &control:Auth-Type = $RAD_CHECK{'Auth-Type'} -> 'linotp2' (5) [perl] = handled (5) } # Auth-Type linotp2 = handled (5) } # server inner-tunnel (5) Virtual server sending reply (5) State = 0x3831353631383330393830333630 (5) Reply-Message = "Multiple challenges submitted." (5) eap_ttls: No tunneled reply was found for request 5 , and the request was not proxied: rejecting the user. (5) eap: ERROR: Failed continuing EAP TTLS (21) session. EAP sub-module failed (5) eap: Sending EAP Failure (code 4) ID 5 length 4 (5) eap: Failed in EAP select (5) [eap] = invalid (5) } # authenticate = invalid (5) Failed to authenticate the user Thanks for any advice and tips. Przemek

2 3

Setting up RADIUS to send accounting packets to multiple database servers simultaneously
by Sea Gull 10 Aug '22

10 Aug '22

Hi, I would like to set up RADIUS to send accounting packets to a local MySQL database and a remote PostgreSQL database. From the research that I did, this does not seem to be possible unless having them set redundant to each other. Is there a possible way to achieve this, please? I have started by setting up RADIUS to write accounting packets to the remote PostgreSQL, which was successful. However, I needed to test that if the remote database is unavailable, RADIUS will still start up. Unfortunately, although I did the change below, RADIUS will not start if the PostgreSQL database is not available. How is it possible to accomplish this, if not as shown below, please? pool { # Connections to create during module instantiation. # If the server cannot create specified number of # connections during instantiation it will exit. # Set to 0 to allow the server to start without the # database being available. start = 0 Furthermore, I am attaching RADIUS debug logs showing what I've explained above. Thanks in advance. Kind Regards, SG

4 5

Some clients not using EAP-TLS anymore
by David le Roux 09 Aug '22

09 Aug '22

Hello, I have a fairly new problem where some clients (Desktops/Laptops) have stopped using their certificates and using EAP and instead present their mac addresses. However this is a minority of clients and has only started to occur recently. The Radius server is configured to do both eap-tls and mac-based auth for clients that aren't compatible. Naturally we don't have mac addresses stored in authorized_macs for our EAP clients. Furthermore the error is not consistent. Some clients throw errors in the logs but can continue to log in (they usually have a mix of successful EAP authentications and unsuccessful mac based auth). Some can log in after an ipconfig /release /renew. This occurs on a variety of access points (that is, different manufacturers) and nothing has changed on them or the radius server as far as I can tell. Any ideas? I've attached a debug log with a few successful and unsuccessful requests. Thanks, David le Roux FreeRADIUS Version 3.2.0 Copyright (C) 1999-2021 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/3.0/dictionary including configuration file /etc/freeradius/3.0/radiusd.conf including configuration file /etc/freeradius/3.0/proxy.conf including configuration file /etc/freeradius/3.0/clients.conf including configuration file /etc/freeradius/3.0/mwanclients.conf including files in directory /etc/freeradius/3.0/mods-enabled/ including configuration file /etc/freeradius/3.0/mods-enabled/unpack including configuration file /etc/freeradius/3.0/mods-enabled/detail.log including configuration file /etc/freeradius/3.0/mods-enabled/detail including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap including configuration file /etc/freeradius/3.0/mods-enabled/logintime including configuration file /etc/freeradius/3.0/mods-enabled/files including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth including configuration file /etc/freeradius/3.0/mods-enabled/replicate including configuration file /etc/freeradius/3.0/mods-enabled/pap including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp including configuration file /etc/freeradius/3.0/mods-enabled/linelog including configuration file /etc/freeradius/3.0/mods-enabled/realm including configuration file /etc/freeradius/3.0/mods-enabled/preprocess including configuration file /etc/freeradius/3.0/mods-enabled/exec including configuration file /etc/freeradius/3.0/mods-enabled/expr including configuration file /etc/freeradius/3.0/mods-enabled/echo including configuration file /etc/freeradius/3.0/mods-enabled/digest including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients including configuration file /etc/freeradius/3.0/mods-enabled/radutmp including configuration file /etc/freeradius/3.0/mods-enabled/utf8 including configuration file /etc/freeradius/3.0/mods-enabled/passwd including configuration file /etc/freeradius/3.0/mods-enabled/unix including configuration file /etc/freeradius/3.0/mods-enabled/eap including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter including configuration file /etc/freeradius/3.0/mods-enabled/expiration including configuration file /etc/freeradius/3.0/mods-enabled/soh including configuration file /etc/freeradius/3.0/mods-enabled/always including configuration file /etc/freeradius/3.0/mods-enabled/mschap including configuration file /etc/freeradius/3.0/mods-enabled/chap including files in directory /etc/freeradius/3.0/policy.d/ including configuration file /etc/freeradius/3.0/policy.d/control including configuration file /etc/freeradius/3.0/policy.d/dhcp including configuration file /etc/freeradius/3.0/policy.d/debug including configuration file /etc/freeradius/3.0/policy.d/operator-name including configuration file /etc/freeradius/3.0/policy.d/filter including configuration file /etc/freeradius/3.0/policy.d/cui including configuration file /etc/freeradius/3.0/policy.d/canonicalization including configuration file /etc/freeradius/3.0/policy.d/abfab-tr including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/3.0/policy.d/rfc7542 including configuration file /etc/freeradius/3.0/policy.d/accounting including configuration file /etc/freeradius/3.0/policy.d/eap including files in directory /etc/freeradius/3.0/sites-enabled/ including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel including configuration file /etc/freeradius/3.0/sites-enabled/mh-site main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 120 cleanup_delay = 10 max_requests = 80000 postauth_client_lost = no pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = yes auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } recv_coa { } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client 127.0.0.1 { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> shortname = "localhost" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached systemd watchdog is disabled # Creating Auth-Type = mschap # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack # Loaded module rlm_detail # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files files { filename = "/etc/freeradius/3.0/mods-config/files/authorize" acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy" } # Loading module "authorized_macs" from file /etc/freeradius/3.0/mods-enabled/files files authorized_macs { usersfile = "/etc/freeradius/3.0/authorized_macs" key = "%{Calling-Station-ID}" } # Loaded module rlm_exec # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_radutmp # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm realm bangpath { format = "prefix" delimiter = "!" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/3.0/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8 # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap eap { default_eap_type = "tls" timer_expire = 600 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 80000 } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap instantiate { } # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy # Instantiating module "authorized_macs" from file /etc/freeradius/3.0/mods-enabled/files reading pairlist file /etc/freeradius/3.0/authorized_macs # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/3.0/certs/millerCA/RADIUS_CA/" pem_file_type = yes private_key_file = "/etc/freeradius/3.0/certs/radius.millerextra.com.key" certificate_file = "/etc/freeradius/3.0/certs/radius.millerextra.com.pem" dh_file = "/etc/freeradius/3.0/certs/dh" random_file = "/dev/urandom" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = yes check_all_crl = no ca_path_reload_interval = 0 check_cert_cn = "%{%{Cert-CN}:-%{User-Name}}" cipher_list = "DEFAULT" cipher_server_preference = no check_cert_issuer = "/C=GB/ST=Edinburgh/L=Edinburgh/O=Miller Group Ltd/OU=Group IT/CN=Intermediate CA" reject_unknown_intermediate_ca = no ecdh_curve = "prime256v1" tls_max_version = "1.2" tls_min_version = "1.2" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } tls: Setting DH parameters from /etc/freeradius/3.0/certs/dh - this is no longer necessary. tls: You should comment out the 'dh_file' configuration item. # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap rlm_mschap (mschap): using internal authentication } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/3.0/radiusd.conf } # server server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type CHAP for attr Auth-Type Compiling Auth-Type MS-CHAP for attr Auth-Type # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/3.0/sites-enabled/inner-tunnel:336 Compiling Post-Auth-Type REJECT for attr Post-Auth-Type } # server inner-tunnel server mh-site { # from file /etc/freeradius/3.0/sites-enabled/mh-site # Loading authenticate {...} Compiling Auth-Type EAP for attr Auth-Type Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type CHAP for attr Auth-Type # Loading authorize {...} # Loading post-proxy {...} } # server mh-site radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } listen { type = "auth" ipaddr = 10.10.251.2 port = 1812 } Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on auth address 10.10.251.2 port 1812 bound to server mh-site Listening on proxy address * port 34473 Ready to process requests (10) Received Access-Request Id 72 from 10.35.80.11:1812 to 10.10.251.2:1812 length 353 (10) Framed-MTU = 1466 (10) NAS-IP-Address = 10.35.80.11 (10) NAS-Identifier = "ba-sw01" (10) User-Name = "08-00-0f-82-60-2b" (10) Service-Type = Call-Check (10) Framed-Protocol = PPP (10) NAS-Port = 39 (10) NAS-Port-Type = Ethernet (10) NAS-Port-Id = "39" (10) Called-Station-Id = "ec-9a-74-19-1f-19" (10) Calling-Station-Id = "08-00-0f-82-60-2b" (10) Connect-Info = "CONNECT Ethernet 100Mbps Full duplex" (10) CHAP-Password = 0xfaa641782c5ee3ce1dd7a848d127e805fa (10) Message-Authenticator = 0xc1f4a47df4d02594a7610daeae455561 (10) MS-RAS-Vendor = 11 (10) HP-Capability-Advert = 0x011a0000000b28 (10) HP-Capability-Advert = 0x011a0000000b2e (10) HP-Capability-Advert = 0x011a0000000b30 (10) HP-Capability-Advert = 0x011a0000000b3d (10) HP-Capability-Advert = 0x011a0000000b18 (10) HP-Capability-Advert = 0x011a0000000b19 (10) HP-Capability-Advert = 0x0138 (10) HP-Capability-Advert = 0x013a (10) HP-Capability-Advert = 0x0140 (10) HP-Capability-Advert = 0x0141 (10) HP-Capability-Advert = 0x0151 (10) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/mh-site (10) authorize { (10) policy filter_username { (10) if (&User-Name) { (10) if (&User-Name) -> TRUE (10) if (&User-Name) { (10) if (&User-Name =~ / /) { (10) if (&User-Name =~ / /) -> FALSE (10) if (&User-Name =~ /@[^@]*@/ ) { (10) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (10) if (&User-Name =~ /\.\./ ) { (10) if (&User-Name =~ /\.\./ ) -> FALSE (10) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (10) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (10) if (&User-Name =~ /\.$/) { (10) if (&User-Name =~ /\.$/) -> FALSE (10) if (&User-Name =~ /(a)\./) { (10) if (&User-Name =~ /(a)\./) -> FALSE (10) } # if (&User-Name) = notfound (10) } # policy filter_username = notfound (10) [preprocess] = ok (10) chap: &control:Auth-Type := CHAP (10) [chap] = ok Not doing PAP as Auth-Type is already set. (10) [pap] = noop (10) eap: No EAP-Message, not doing EAP (10) [eap] = noop (10) files: users: Matched entry DEFAULT at line 167 (10) [files] = ok (10) [expiration] = noop (10) [logintime] = noop (10) policy rewrite_calling_station_id { (10) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (10) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) -> TRUE (10) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (10) update request { (10) EXPAND %{tolower:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (10) --> 08-00-0f-82-60-2b (10) &Calling-Station-Id := 08-00-0f-82-60-2b (10) } # update request = noop (10) [updated] = updated (10) } # if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) = updated (10) ... skipping else: Preceding "if" was taken (10) } # policy rewrite_calling_station_id = updated (10) if (&User-Name =~ /^host\/(.*)$/) { (10) if (&User-Name =~ /^host\/(.*)$/) -> FALSE (10) if (!EAP-Message) { (10) if (!EAP-Message) -> TRUE (10) if (!EAP-Message) { (10) authorized_macs: EXPAND %{Calling-Station-ID} (10) authorized_macs: --> 08-00-0f-82-60-2b (10) authorized_macs: users: Matched entry 08-00-0f-82-60-2b at line 599 (10) authorized_macs: EXPAND Device with MAC Address %{Calling-Station-Id} authorized for network access mil057-Derby-01 (10) authorized_macs: --> Device with MAC Address 08-00-0f-82-60-2b authorized for network access mil057-Derby-01 (10) [authorized_macs] = ok (10) if (!ok) { (10) if (!ok) -> FALSE (10) else { (10) update control { (10) Auth-Type := Accept (10) } # update control = noop (10) } # else = noop (10) } # if (!EAP-Message) = ok (10) ... skipping else: Preceding "if" was taken (10) } # authorize = updated (10) Found Auth-Type = Accept (10) Auth-Type = Accept, accepting the user (10) Login OK: [08-00-0f-82-60-2b] (from client ba-sw01 port 39 cli 08-00-0f-82-60-2b) (10) Sent Access-Accept Id 72 from 10.10.251.2:1812 to 10.35.80.11:1812 length 121 (10) Framed-Protocol = PPP (10) Framed-Compression = Van-Jacobson-TCP-IP (10) Reply-Message = "Device with MAC Address 08-00-0f-82-60-2b authorized for network access mil057-Derby-01" (10) Finished request Waking up in 7.7 seconds. (11) Received Access-Request Id 222 from 10.225.23.1:59952 to 10.10.251.2:1812 length 1794 (11) User-Name = "host/mh302290.millerextra.com" (11) NAS-IP-Address = 0.0.0.0 (11) NAS-Identifier = "E0-55-3D-89-23-20:vap1" (11) Called-Station-Id = "E2-55-6D-89-23-21:mhstaff" (11) NAS-Port-Type = Wireless-802.11 (11) Service-Type = Framed-User (11) NAS-Port = 1 (11) Calling-Station-Id = "DC-21-5C-C3-72-47" (11) Connect-Info = "CONNECT 0.00 Mbps / 802. / RSSI: 0 / Channel: 0" (11) Acct-Session-Id = "9CDB98DC889BEB86" (11) Acct-Multi-Session-Id = "2D0EF608C685F0CB" (11) WLAN-Pairwise-Cipher = 1027076 (11) WLAN-Group-Cipher = 1027076 (11) WLAN-AKM-Suite = 1027073 (11) Framed-MTU = 1400 (11) EAP-Message = 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 (11) State = 0xf72b5a5df3bb57a9c1efd3e6da559108 (11) Message-Authenticator = 0xfd14e06d0d481d0ddcc791481667491c (11) session-state: No cached attributes (11) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/mh-site (11) authorize { (11) policy filter_username { (11) if (&User-Name) { (11) if (&User-Name) -> TRUE (11) if (&User-Name) { (11) if (&User-Name =~ / /) { (11) if (&User-Name =~ / /) -> FALSE (11) if (&User-Name =~ /@[^@]*@/ ) { (11) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (11) if (&User-Name =~ /\.\./ ) { (11) if (&User-Name =~ /\.\./ ) -> FALSE (11) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (11) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (11) if (&User-Name =~ /\.$/) { (11) if (&User-Name =~ /\.$/) -> FALSE (11) if (&User-Name =~ /(a)\./) { (11) if (&User-Name =~ /(a)\./) -> FALSE (11) } # if (&User-Name) = notfound (11) } # policy filter_username = notfound (11) [preprocess] = ok (11) [chap] = noop (11) pap: WARNING: No "known good" password found for the user. Not setting Auth-Type (11) pap: WARNING: Authentication will fail unless a "known good" password is available (11) [pap] = noop (11) eap: Peer sent EAP Response (code 2) ID 144 length 1492 (11) eap: No EAP Start, assuming it's an on-going EAP conversation (11) [eap] = updated (11) [files] = noop (11) [expiration] = noop (11) [logintime] = noop (11) policy rewrite_calling_station_id { (11) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (11) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) -> TRUE (11) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (11) update request { (11) EXPAND %{tolower:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (11) --> dc-21-5c-c3-72-47 (11) &Calling-Station-Id := dc-21-5c-c3-72-47 (11) } # update request = noop (11) [updated] = updated (11) } # if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) = updated (11) ... skipping else: Preceding "if" was taken (11) } # policy rewrite_calling_station_id = updated (11) if (&User-Name =~ /^host\/(.*)$/) { (11) if (&User-Name =~ /^host\/(.*)$/) -> TRUE (11) if (&User-Name =~ /^host\/(.*)$/) { (11) update request { (11) EXPAND %{1} (11) --> mh302290.millerextra.com (11) &Cert-CN := mh302290.millerextra.com (11) } # update request = noop (11) } # if (&User-Name =~ /^host\/(.*)$/) = noop (11) if (!EAP-Message) { (11) if (!EAP-Message) -> FALSE (11) else { (11) eap: Peer sent EAP Response (code 2) ID 144 length 1492 (11) eap: No EAP Start, assuming it's an on-going EAP conversation (11) [eap] = updated (11) } # else = updated (11) } # authorize = updated (11) Found Auth-Type = eap (11) Found Auth-Type = eap (11) ERROR: Warning: Found 2 auth-types on request for user 'host/mh302290.millerextra.com' (11) # Executing group from file /etc/freeradius/3.0/sites-enabled/mh-site (11) Auth-Type EAP { (11) eap: Expiring EAP session with state 0xdd940e92d9030376 (11) eap: ERROR: rlm_eap (EAP): No EAP session matching state 0xf72b5a5df3bb57a9 (11) eap: Either EAP-request timed out OR EAP-response to an unknown EAP-request (11) eap: Failed in handler (11) [eap] = invalid (11) } # Auth-Type EAP = invalid (11) Failed to authenticate the user (11) Using Post-Auth-Type Reject (11) Post-Auth-Type sub-section not found. Ignoring. (11) Login incorrect (Warning: Found 2 auth-types on request for user 'host/mh302290.millerextra.com'): [host/mh302290.millerextra.com] (from client MWAN-10.225.23.1 port 1 cli dc-21-5c-c3-72-47) (11) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (11) Sending delayed response (11) Sent Access-Reject Id 222 from 10.10.251.2:1812 to 10.225.23.1:59952 length 20 Waking up in 5.2 seconds. (12) Received Access-Request Id 223 from 10.225.23.1:59952 to 10.10.251.2:1812 length 315 (12) User-Name = "host/mh302290.millerextra.com" (12) NAS-IP-Address = 0.0.0.0 (12) NAS-Identifier = "E0-55-3D-89-23-20:vap1" (12) Called-Station-Id = "E2-55-6D-89-23-21:mhstaff" (12) NAS-Port-Type = Wireless-802.11 (12) Service-Type = Framed-User (12) NAS-Port = 1 (12) Calling-Station-Id = "DC-21-5C-C3-72-47" (12) Connect-Info = "CONNECT 54.00 Mbps / 802.11ac / RSSI: 43 / Channel: 44" (12) Acct-Session-Id = "2658296537E87022" (12) Acct-Multi-Session-Id = "998A54E28541EE6C" (12) WLAN-Pairwise-Cipher = 1027076 (12) WLAN-Group-Cipher = 1027076 (12) WLAN-AKM-Suite = 1027073 (12) Framed-MTU = 1400 (12) EAP-Message = 0x02c4002201686f73742f6d683330323239302e6d696c6c657265787472612e636f6d (12) Message-Authenticator = 0x5181770c1add38466ac200aa55ea74b1 (12) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/mh-site (12) authorize { (12) policy filter_username { (12) if (&User-Name) { (12) if (&User-Name) -> TRUE (12) if (&User-Name) { (12) if (&User-Name =~ / /) { (12) if (&User-Name =~ / /) -> FALSE (12) if (&User-Name =~ /@[^@]*@/ ) { (12) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (12) if (&User-Name =~ /\.\./ ) { (12) if (&User-Name =~ /\.\./ ) -> FALSE (12) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (12) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (12) if (&User-Name =~ /\.$/) { (12) if (&User-Name =~ /\.$/) -> FALSE (12) if (&User-Name =~ /(a)\./) { (12) if (&User-Name =~ /(a)\./) -> FALSE (12) } # if (&User-Name) = notfound (12) } # policy filter_username = notfound (12) [preprocess] = ok (12) [chap] = noop (12) pap: WARNING: No "known good" password found for the user. Not setting Auth-Type (12) pap: WARNING: Authentication will fail unless a "known good" password is available (12) [pap] = noop (12) eap: Peer sent EAP Response (code 2) ID 196 length 34 (12) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (12) [eap] = ok (12) } # authorize = ok (12) Found Auth-Type = eap (12) # Executing group from file /etc/freeradius/3.0/sites-enabled/mh-site (12) Auth-Type EAP { (12) eap: Peer sent packet with method EAP Identity (1) (12) eap: Calling submodule eap_tls to process data (12) eap_tls: (TLS) Initiating new session (12) eap_tls: (TLS) Setting verify mode to require certificate from client (12) eap: Sending EAP Request (code 1) ID 197 length 6 (12) eap: EAP session adding &reply:State = 0xaac2f7c8aa07faba (12) [eap] = handled (12) } # Auth-Type EAP = handled (12) Using Post-Auth-Type Challenge (12) Post-Auth-Type sub-section not found. Ignoring. (12) session-state: Saving cached attributes (12) Framed-MTU = 994 (12) Sent Access-Challenge Id 223 from 10.10.251.2:1812 to 10.225.23.1:59952 length 64 (12) EAP-Message = 0x01c500060d20 (12) Message-Authenticator = 0x00000000000000000000000000000000 (12) State = 0xaac2f7c8aa07fabaed78ca5277b3b026 (12) Finished request Waking up in 4.0 seconds. (13) Received Access-Request Id 224 from 10.225.23.1:59952 to 10.10.251.2:1812 length 465 (13) User-Name = "host/mh302290.millerextra.com" (13) NAS-IP-Address = 0.0.0.0 (13) NAS-Identifier = "E0-55-3D-89-23-20:vap1" (13) Called-Station-Id = "E2-55-6D-89-23-21:mhstaff" (13) NAS-Port-Type = Wireless-802.11 (13) Service-Type = Framed-User (13) NAS-Port = 1 (13) Calling-Station-Id = "DC-21-5C-C3-72-47" (13) Connect-Info = "CONNECT 54.00 Mbps / 802.11ac / RSSI: 43 / Channel: 44" (13) Acct-Session-Id = "2658296537E87022" (13) Acct-Multi-Session-Id = "998A54E28541EE6C" (13) WLAN-Pairwise-Cipher = 1027076 (13) WLAN-Group-Cipher = 1027076 (13) WLAN-AKM-Suite = 1027073 (13) Framed-MTU = 1400 (13) EAP-Message = 0x02c500a60d800000009c160303009701000093030362ebdf9c0af9efa6996f92ec7b67d43784dd9b91c9e727693384342d4b45e60a00002ac02cc02bc030c02f009f009ec024c023c028c027c00ac009c014c013009d009c003d003c0035002f000a01000040000500050100000000000a00080006001d00170018000b00020100000d001400120401050102010403050302030202060106030023000000170000ff01000100 (13) State = 0xaac2f7c8aa07fabaed78ca5277b3b026 (13) Message-Authenticator = 0x429c1aebbd6926690dfe5c2b28211a0b (13) Restoring &session-state (13) &session-state:Framed-MTU = 994 (13) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/mh-site (13) authorize { (13) policy filter_username { (13) if (&User-Name) { (13) if (&User-Name) -> TRUE (13) if (&User-Name) { (13) if (&User-Name =~ / /) { (13) if (&User-Name =~ / /) -> FALSE (13) if (&User-Name =~ /@[^@]*@/ ) { (13) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (13) if (&User-Name =~ /\.\./ ) { (13) if (&User-Name =~ /\.\./ ) -> FALSE (13) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (13) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (13) if (&User-Name =~ /\.$/) { (13) if (&User-Name =~ /\.$/) -> FALSE (13) if (&User-Name =~ /(a)\./) { (13) if (&User-Name =~ /(a)\./) -> FALSE (13) } # if (&User-Name) = notfound (13) } # policy filter_username = notfound (13) [preprocess] = ok (13) [chap] = noop (13) pap: WARNING: No "known good" password found for the user. Not setting Auth-Type (13) pap: WARNING: Authentication will fail unless a "known good" password is available (13) [pap] = noop (13) eap: Peer sent EAP Response (code 2) ID 197 length 166 (13) eap: No EAP Start, assuming it's an on-going EAP conversation (13) [eap] = updated (13) [files] = noop (13) [expiration] = noop (13) [logintime] = noop (13) policy rewrite_calling_station_id { (13) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (13) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) -> TRUE (13) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (13) update request { (13) EXPAND %{tolower:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (13) --> dc-21-5c-c3-72-47 (13) &Calling-Station-Id := dc-21-5c-c3-72-47 (13) } # update request = noop (13) [updated] = updated (13) } # if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) = updated (13) ... skipping else: Preceding "if" was taken (13) } # policy rewrite_calling_station_id = updated (13) if (&User-Name =~ /^host\/(.*)$/) { (13) if (&User-Name =~ /^host\/(.*)$/) -> TRUE (13) if (&User-Name =~ /^host\/(.*)$/) { (13) update request { (13) EXPAND %{1} (13) --> mh302290.millerextra.com (13) &Cert-CN := mh302290.millerextra.com (13) } # update request = noop (13) } # if (&User-Name =~ /^host\/(.*)$/) = noop (13) if (!EAP-Message) { (13) if (!EAP-Message) -> FALSE (13) else { (13) eap: Peer sent EAP Response (code 2) ID 197 length 166 (13) eap: No EAP Start, assuming it's an on-going EAP conversation (13) [eap] = updated (13) } # else = updated (13) } # authorize = updated (13) Found Auth-Type = eap (13) Found Auth-Type = eap (13) ERROR: Warning: Found 2 auth-types on request for user 'host/mh302290.millerextra.com' (13) # Executing group from file /etc/freeradius/3.0/sites-enabled/mh-site (13) Auth-Type EAP { (13) eap: Expiring EAP session with state 0xdd940e92d9030376 (13) eap: Finished EAP session with state 0xaac2f7c8aa07faba (13) eap: Previous EAP request found for state 0xaac2f7c8aa07faba, released from the list (13) eap: Peer sent packet with method EAP TLS (13) (13) eap: Calling submodule eap_tls to process data (13) eap_tls: (TLS) EAP Peer says that the final record size will be 156 bytes (13) eap_tls: (TLS) EAP Got all data (156 bytes) (13) eap_tls: (TLS) Handshake state - before SSL initialization (13) eap_tls: (TLS) Handshake state - Server before SSL initialization (13) eap_tls: (TLS) Handshake state - Server before SSL initialization (13) eap_tls: (TLS) recv TLS 1.3 Handshake, ClientHello (13) eap_tls: (TLS) Handshake state - Server SSLv3/TLS read client hello (13) eap_tls: (TLS) send TLS 1.2 Handshake, ServerHello (13) eap_tls: (TLS) Handshake state - Server SSLv3/TLS write server hello (13) eap_tls: (TLS) send TLS 1.2 Handshake, Certificate (13) eap_tls: (TLS) Handshake state - Server SSLv3/TLS write certificate (13) eap_tls: (TLS) send TLS 1.2 Handshake, ServerKeyExchange (13) eap_tls: (TLS) Handshake state - Server SSLv3/TLS write key exchange (13) eap_tls: (TLS) send TLS 1.2 Handshake, CertificateRequest (13) eap_tls: (TLS) Handshake state - Server SSLv3/TLS write certificate request (13) eap_tls: (TLS) send TLS 1.2 Handshake, ServerHelloDone (13) eap_tls: (TLS) Handshake state - Server SSLv3/TLS write server done (13) eap_tls: (TLS) Server : Need to read more data: SSLv3/TLS write server done (13) eap_tls: (TLS) In Handshake Phase (13) eap: Sending EAP Request (code 1) ID 198 length 1004 (13) eap: EAP session adding &reply:State = 0xaac2f7c8ab04faba (13) [eap] = handled (13) } # Auth-Type EAP = handled (13) Using Post-Auth-Type Challenge (13) Post-Auth-Type sub-section not found. Ignoring. (13) session-state: Saving cached attributes (13) Framed-MTU = 994 (13) Sent Access-Challenge Id 224 from 10.10.251.2:1812 to 10.225.23.1:59952 length 1068 (13) EAP-Message = 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 (13) Message-Authenticator = 0x00000000000000000000000000000000 (13) State = 0xaac2f7c8ab04fabaed78ca5277b3b026 (13) Finished request Waking up in 3.9 seconds. (14) Received Access-Request Id 225 from 10.225.23.1:59952 to 10.10.251.2:1812 length 305 (14) User-Name = "host/mh302290.millerextra.com" (14) NAS-IP-Address = 0.0.0.0 (14) NAS-Identifier = "E0-55-3D-89-23-20:vap1" (14) Called-Station-Id = "E2-55-6D-89-23-21:mhstaff" (14) NAS-Port-Type = Wireless-802.11 (14) Service-Type = Framed-User (14) NAS-Port = 1 (14) Calling-Station-Id = "DC-21-5C-C3-72-47" (14) Connect-Info = "CONNECT 54.00 Mbps / 802.11ac / RSSI: 42 / Channel: 44" (14) Acct-Session-Id = "2658296537E87022" (14) Acct-Multi-Session-Id = "998A54E28541EE6C" (14) WLAN-Pairwise-Cipher = 1027076 (14) WLAN-Group-Cipher = 1027076 (14) WLAN-AKM-Suite = 1027073 (14) Framed-MTU = 1400 (14) EAP-Message = 0x02c600060d00 (14) State = 0xaac2f7c8ab04fabaed78ca5277b3b026 (14) Message-Authenticator = 0xcd1501bb910ecdbf44f6a27cd1f054c7 (14) Restoring &session-state (14) &session-state:Framed-MTU = 994 (14) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/mh-site (14) authorize { (14) policy filter_username { (14) if (&User-Name) { (14) if (&User-Name) -> TRUE (14) if (&User-Name) { (14) if (&User-Name =~ / /) { (14) if (&User-Name =~ / /) -> FALSE (14) if (&User-Name =~ /@[^@]*@/ ) { (14) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (14) if (&User-Name =~ /\.\./ ) { (14) if (&User-Name =~ /\.\./ ) -> FALSE (14) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (14) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (14) if (&User-Name =~ /\.$/) { (14) if (&User-Name =~ /\.$/) -> FALSE (14) if (&User-Name =~ /(a)\./) { (14) if (&User-Name =~ /(a)\./) -> FALSE (14) } # if (&User-Name) = notfound (14) } # policy filter_username = notfound (14) [preprocess] = ok (14) [chap] = noop (14) pap: WARNING: No "known good" password found for the user. Not setting Auth-Type (14) pap: WARNING: Authentication will fail unless a "known good" password is available (14) [pap] = noop (14) eap: Peer sent EAP Response (code 2) ID 198 length 6 (14) eap: No EAP Start, assuming it's an on-going EAP conversation (14) [eap] = updated (14) [files] = noop (14) [expiration] = noop (14) [logintime] = noop (14) policy rewrite_calling_station_id { (14) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (14) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) -> TRUE (14) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (14) update request { (14) EXPAND %{tolower:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (14) --> dc-21-5c-c3-72-47 (14) &Calling-Station-Id := dc-21-5c-c3-72-47 (14) } # update request = noop (14) [updated] = updated (14) } # if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) = updated (14) ... skipping else: Preceding "if" was taken (14) } # policy rewrite_calling_station_id = updated (14) if (&User-Name =~ /^host\/(.*)$/) { (14) if (&User-Name =~ /^host\/(.*)$/) -> TRUE (14) if (&User-Name =~ /^host\/(.*)$/) { (14) update request { (14) EXPAND %{1} (14) --> mh302290.millerextra.com (14) &Cert-CN := mh302290.millerextra.com (14) } # update request = noop (14) } # if (&User-Name =~ /^host\/(.*)$/) = noop (14) if (!EAP-Message) { (14) if (!EAP-Message) -> FALSE (14) else { (14) eap: Peer sent EAP Response (code 2) ID 198 length 6 (14) eap: No EAP Start, assuming it's an on-going EAP conversation (14) [eap] = updated (14) } # else = updated (14) } # authorize = updated (14) Found Auth-Type = eap (14) Found Auth-Type = eap (14) ERROR: Warning: Found 2 auth-types on request for user 'host/mh302290.millerextra.com' (14) # Executing group from file /etc/freeradius/3.0/sites-enabled/mh-site (14) Auth-Type EAP { (14) eap: Expiring EAP session with state 0xdd940e92d9030376 (14) eap: Finished EAP session with state 0xaac2f7c8ab04faba (14) eap: Previous EAP request found for state 0xaac2f7c8ab04faba, released from the list (14) eap: Peer sent packet with method EAP TLS (13) (14) eap: Calling submodule eap_tls to process data (14) eap_tls: (TLS) Peer ACKed our handshake fragment (14) eap: Sending EAP Request (code 1) ID 199 length 1004 (14) eap: EAP session adding &reply:State = 0xaac2f7c8a805faba (14) [eap] = handled (14) } # Auth-Type EAP = handled (14) Using Post-Auth-Type Challenge (14) Post-Auth-Type sub-section not found. Ignoring. (14) session-state: Saving cached attributes (14) Framed-MTU = 994 (14) Sent Access-Challenge Id 225 from 10.10.251.2:1812 to 10.225.23.1:59952 length 1068 (14) EAP-Message = 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 (14) Message-Authenticator = 0x00000000000000000000000000000000 (14) State = 0xaac2f7c8a805fabaed78ca5277b3b026 (14) Finished request Waking up in 3.8 seconds. (15) Received Access-Request Id 226 from 10.225.23.1:59952 to 10.10.251.2:1812 length 305 (15) User-Name = "host/mh302290.millerextra.com" (15) NAS-IP-Address = 0.0.0.0 (15) NAS-Identifier = "E0-55-3D-89-23-20:vap1" (15) Called-Station-Id = "E2-55-6D-89-23-21:mhstaff" (15) NAS-Port-Type = Wireless-802.11 (15) Service-Type = Framed-User (15) NAS-Port = 1 (15) Calling-Station-Id = "DC-21-5C-C3-72-47" (15) Connect-Info = "CONNECT 54.00 Mbps / 802.11ac / RSSI: 42 / Channel: 44" (15) Acct-Session-Id = "2658296537E87022" (15) Acct-Multi-Session-Id = "998A54E28541EE6C" (15) WLAN-Pairwise-Cipher = 1027076 (15) WLAN-Group-Cipher = 1027076 (15) WLAN-AKM-Suite = 1027073 (15) Framed-MTU = 1400 (15) EAP-Message = 0x02c700060d00 (15) State = 0xaac2f7c8a805fabaed78ca5277b3b026 (15) Message-Authenticator = 0x86b56f67d5c598cadcb3cebe70c55884 (15) Restoring &session-state (15) &session-state:Framed-MTU = 994 (15) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/mh-site (15) authorize { (15) policy filter_username { (15) if (&User-Name) { (15) if (&User-Name) -> TRUE (15) if (&User-Name) { (15) if (&User-Name =~ / /) { (15) if (&User-Name =~ / /) -> FALSE (15) if (&User-Name =~ /@[^@]*@/ ) { (15) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (15) if (&User-Name =~ /\.\./ ) { (15) if (&User-Name =~ /\.\./ ) -> FALSE (15) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (15) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (15) if (&User-Name =~ /\.$/) { (15) if (&User-Name =~ /\.$/) -> FALSE (15) if (&User-Name =~ /(a)\./) { (15) if (&User-Name =~ /(a)\./) -> FALSE (15) } # if (&User-Name) = notfound (15) } # policy filter_username = notfound (15) [preprocess] = ok (15) [chap] = noop (15) pap: WARNING: No "known good" password found for the user. Not setting Auth-Type (15) pap: WARNING: Authentication will fail unless a "known good" password is available (15) [pap] = noop (15) eap: Peer sent EAP Response (code 2) ID 199 length 6 (15) eap: No EAP Start, assuming it's an on-going EAP conversation (15) [eap] = updated (15) [files] = noop (15) [expiration] = noop (15) [logintime] = noop (15) policy rewrite_calling_station_id { (15) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (15) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) -> TRUE (15) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (15) update request { (15) EXPAND %{tolower:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (15) --> dc-21-5c-c3-72-47 (15) &Calling-Station-Id := dc-21-5c-c3-72-47 (15) } # update request = noop (15) [updated] = updated (15) } # if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) = updated (15) ... skipping else: Preceding "if" was taken (15) } # policy rewrite_calling_station_id = updated (15) if (&User-Name =~ /^host\/(.*)$/) { (15) if (&User-Name =~ /^host\/(.*)$/) -> TRUE (15) if (&User-Name =~ /^host\/(.*)$/) { (15) update request { (15) EXPAND %{1} (15) --> mh302290.millerextra.com (15) &Cert-CN := mh302290.millerextra.com (15) } # update request = noop (15) } # if (&User-Name =~ /^host\/(.*)$/) = noop (15) if (!EAP-Message) { (15) if (!EAP-Message) -> FALSE (15) else { (15) eap: Peer sent EAP Response (code 2) ID 199 length 6 (15) eap: No EAP Start, assuming it's an on-going EAP conversation (15) [eap] = updated (15) } # else = updated (15) } # authorize = updated (15) Found Auth-Type = eap (15) Found Auth-Type = eap (15) ERROR: Warning: Found 2 auth-types on request for user 'host/mh302290.millerextra.com' (15) # Executing group from file /etc/freeradius/3.0/sites-enabled/mh-site (15) Auth-Type EAP { (15) eap: Expiring EAP session with state 0xdd940e92d9030376 (15) eap: Finished EAP session with state 0xaac2f7c8a805faba (15) eap: Previous EAP request found for state 0xaac2f7c8a805faba, released from the list (15) eap: Peer sent packet with method EAP TLS (13) (15) eap: Calling submodule eap_tls to process data (15) eap_tls: (TLS) Peer ACKed our handshake fragment (15) eap: Sending EAP Request (code 1) ID 200 length 1004 (15) eap: EAP session adding &reply:State = 0xaac2f7c8a90afaba (15) [eap] = handled (15) } # Auth-Type EAP = handled (15) Using Post-Auth-Type Challenge (15) Post-Auth-Type sub-section not found. Ignoring. (15) session-state: Saving cached attributes (15) Framed-MTU = 994 (15) Sent Access-Challenge Id 226 from 10.10.251.2:1812 to 10.225.23.1:59952 length 1068 (15) EAP-Message = 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 (15) Message-Authenticator = 0x00000000000000000000000000000000 (15) State = 0xaac2f7c8a90afabaed78ca5277b3b026 (15) Finished request Waking up in 3.7 seconds. (16) Received Access-Request Id 227 from 10.225.23.1:59952 to 10.10.251.2:1812 length 305 (16) User-Name = "host/mh302290.millerextra.com" (16) NAS-IP-Address = 0.0.0.0 (16) NAS-Identifier = "E0-55-3D-89-23-20:vap1" (16) Called-Station-Id = "E2-55-6D-89-23-21:mhstaff" (16) NAS-Port-Type = Wireless-802.11 (16) Service-Type = Framed-User (16) NAS-Port = 1 (16) Calling-Station-Id = "DC-21-5C-C3-72-47" (16) Connect-Info = "CONNECT 54.00 Mbps / 802.11ac / RSSI: 42 / Channel: 44" (16) Acct-Session-Id = "2658296537E87022" (16) Acct-Multi-Session-Id = "998A54E28541EE6C" (16) WLAN-Pairwise-Cipher = 1027076 (16) WLAN-Group-Cipher = 1027076 (16) WLAN-AKM-Suite = 1027073 (16) Framed-MTU = 1400 (16) EAP-Message = 0x02c800060d00 (16) State = 0xaac2f7c8a90afabaed78ca5277b3b026 (16) Message-Authenticator = 0xc01149efd82fc9c07cad6bd237559ece (16) Restoring &session-state (16) &session-state:Framed-MTU = 994 (16) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/mh-site (16) authorize { (16) policy filter_username { (16) if (&User-Name) { (16) if (&User-Name) -> TRUE (16) if (&User-Name) { (16) if (&User-Name =~ / /) { (16) if (&User-Name =~ / /) -> FALSE (16) if (&User-Name =~ /@[^@]*@/ ) { (16) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (16) if (&User-Name =~ /\.\./ ) { (16) if (&User-Name =~ /\.\./ ) -> FALSE (16) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (16) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (16) if (&User-Name =~ /\.$/) { (16) if (&User-Name =~ /\.$/) -> FALSE (16) if (&User-Name =~ /(a)\./) { (16) if (&User-Name =~ /(a)\./) -> FALSE (16) } # if (&User-Name) = notfound (16) } # policy filter_username = notfound (16) [preprocess] = ok (16) [chap] = noop (16) pap: WARNING: No "known good" password found for the user. Not setting Auth-Type (16) pap: WARNING: Authentication will fail unless a "known good" password is available (16) [pap] = noop (16) eap: Peer sent EAP Response (code 2) ID 200 length 6 (16) eap: No EAP Start, assuming it's an on-going EAP conversation (16) [eap] = updated (16) [files] = noop (16) [expiration] = noop (16) [logintime] = noop (16) policy rewrite_calling_station_id { (16) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (16) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) -> TRUE (16) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (16) update request { (16) EXPAND %{tolower:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (16) --> dc-21-5c-c3-72-47 (16) &Calling-Station-Id := dc-21-5c-c3-72-47 (16) } # update request = noop (16) [updated] = updated (16) } # if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) = updated (16) ... skipping else: Preceding "if" was taken (16) } # policy rewrite_calling_station_id = updated (16) if (&User-Name =~ /^host\/(.*)$/) { (16) if (&User-Name =~ /^host\/(.*)$/) -> TRUE (16) if (&User-Name =~ /^host\/(.*)$/) { (16) update request { (16) EXPAND %{1} (16) --> mh302290.millerextra.com (16) &Cert-CN := mh302290.millerextra.com (16) } # update request = noop (16) } # if (&User-Name =~ /^host\/(.*)$/) = noop (16) if (!EAP-Message) { (16) if (!EAP-Message) -> FALSE (16) else { (16) eap: Peer sent EAP Response (code 2) ID 200 length 6 (16) eap: No EAP Start, assuming it's an on-going EAP conversation (16) [eap] = updated (16) } # else = updated (16) } # authorize = updated (16) Found Auth-Type = eap (16) Found Auth-Type = eap (16) ERROR: Warning: Found 2 auth-types on request for user 'host/mh302290.millerextra.com' (16) # Executing group from file /etc/freeradius/3.0/sites-enabled/mh-site (16) Auth-Type EAP { (16) eap: Expiring EAP session with state 0xdd940e92d9030376 (16) eap: Finished EAP session with state 0xaac2f7c8a90afaba (16) eap: Previous EAP request found for state 0xaac2f7c8a90afaba, released from the list (16) eap: Peer sent packet with method EAP TLS (13) (16) eap: Calling submodule eap_tls to process data (16) eap_tls: (TLS) Peer ACKed our handshake fragment (16) eap: Sending EAP Request (code 1) ID 201 length 406 (16) eap: EAP session adding &reply:State = 0xaac2f7c8ae0bfaba (16) [eap] = handled (16) } # Auth-Type EAP = handled (16) Using Post-Auth-Type Challenge (16) Post-Auth-Type sub-section not found. Ignoring. (16) session-state: Saving cached attributes (16) Framed-MTU = 994 (16) Sent Access-Challenge Id 227 from 10.10.251.2:1812 to 10.225.23.1:59952 length 466 (16) EAP-Message = 0x01c901960d8000000d32ef53f57a455c108febd3d77c85c7bba183e2970232e0a57c48ef3374523b4c3d7b5fff7028ea28fc53476f1a9f3ba2f57bde6f4b4aa65bd0db7debe7ef052e234409f02dd108b426cc8e7cddc82f501e73f03bdf3875d2cada085de5e9af2bf7ebab413d24b073f44f694df44bad07691a3616030300cd0c0000c90300174104bf7fa3292066dc49f258a82260857a24a5deb2245ebde7def3735117c97082722d5eab3e86d2efe52e20b0d0e3347317ebff940709132426e71ae78ea7405747040100801f931ade0b5bcd12c4f8f36dd8cbb396f372a28eb6e9fbf10a5993ecc7664767e8cd8ed5502b79990b370cdfa818f1c795c76cc9e5b68f823e13cdca16e54ff21d8c9211ca09df258fdab61843edbc3d660cba9a2c856ecaf3e53977810ed983f403100d4030f7d83ad1372b612fb684cc732206ed9a52fc62eac49278358c06160303003a0d00003603010240002e040305030603080708080809080a080b08040805080604010501 (16) Message-Authenticator = 0x00000000000000000000000000000000 (16) State = 0xaac2f7c8ae0bfabaed78ca5277b3b026 (16) Finished request Waking up in 3.6 seconds. (17) Received Access-Request Id 228 from 10.225.23.1:59952 to 10.10.251.2:1812 length 1801 (17) User-Name = "host/mh302290.millerextra.com" (17) NAS-IP-Address = 0.0.0.0 (17) NAS-Identifier = "E0-55-3D-89-23-20:vap1" (17) Called-Station-Id = "E2-55-6D-89-23-21:mhstaff" (17) NAS-Port-Type = Wireless-802.11 (17) Service-Type = Framed-User (17) NAS-Port = 1 (17) Calling-Station-Id = "DC-21-5C-C3-72-47" (17) Connect-Info = "CONNECT 54.00 Mbps / 802.11ac / RSSI: 42 / Channel: 44" (17) Acct-Session-Id = "2658296537E87022" (17) Acct-Multi-Session-Id = "998A54E28541EE6C" (17) WLAN-Pairwise-Cipher = 1027076 (17) WLAN-Group-Cipher = 1027076 (17) WLAN-AKM-Suite = 1027073 (17) Framed-MTU = 1400 (17) EAP-Message = 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 (17) State = 0xaac2f7c8ae0bfabaed78ca5277b3b026 (17) Message-Authenticator = 0x217b4ea05047c4bcc41c987c8fc5f8af (17) Restoring &session-state (17) &session-state:Framed-MTU = 994 (17) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/mh-site (17) authorize { (17) policy filter_username { (17) if (&User-Name) { (17) if (&User-Name) -> TRUE (17) if (&User-Name) { (17) if (&User-Name =~ / /) { (17) if (&User-Name =~ / /) -> FALSE (17) if (&User-Name =~ /@[^@]*@/ ) { (17) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (17) if (&User-Name =~ /\.\./ ) { (17) if (&User-Name =~ /\.\./ ) -> FALSE (17) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (17) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (17) if (&User-Name =~ /\.$/) { (17) if (&User-Name =~ /\.$/) -> FALSE (17) if (&User-Name =~ /(a)\./) { (17) if (&User-Name =~ /(a)\./) -> FALSE (17) } # if (&User-Name) = notfound (17) } # policy filter_username = notfound (17) [preprocess] = ok (17) [chap] = noop (17) pap: WARNING: No "known good" password found for the user. Not setting Auth-Type (17) pap: WARNING: Authentication will fail unless a "known good" password is available (17) [pap] = noop (17) eap: Peer sent EAP Response (code 2) ID 201 length 1492 (17) eap: No EAP Start, assuming it's an on-going EAP conversation (17) [eap] = updated (17) [files] = noop (17) [expiration] = noop (17) [logintime] = noop (17) policy rewrite_calling_station_id { (17) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (17) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) -> TRUE (17) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (17) update request { (17) EXPAND %{tolower:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (17) --> dc-21-5c-c3-72-47 (17) &Calling-Station-Id := dc-21-5c-c3-72-47 (17) } # update request = noop (17) [updated] = updated (17) } # if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) = updated (17) ... skipping else: Preceding "if" was taken (17) } # policy rewrite_calling_station_id = updated (17) if (&User-Name =~ /^host\/(.*)$/) { (17) if (&User-Name =~ /^host\/(.*)$/) -> TRUE (17) if (&User-Name =~ /^host\/(.*)$/) { (17) update request { (17) EXPAND %{1} (17) --> mh302290.millerextra.com (17) &Cert-CN := mh302290.millerextra.com (17) } # update request = noop (17) } # if (&User-Name =~ /^host\/(.*)$/) = noop (17) if (!EAP-Message) { (17) if (!EAP-Message) -> FALSE (17) else { (17) eap: Peer sent EAP Response (code 2) ID 201 length 1492 (17) eap: No EAP Start, assuming it's an on-going EAP conversation (17) [eap] = updated (17) } # else = updated (17) } # authorize = updated (17) Found Auth-Type = eap (17) Found Auth-Type = eap (17) ERROR: Warning: Found 2 auth-types on request for user 'host/mh302290.millerextra.com' (17) # Executing group from file /etc/freeradius/3.0/sites-enabled/mh-site (17) Auth-Type EAP { (17) eap: Expiring EAP session with state 0xdd940e92d9030376 (17) eap: Finished EAP session with state 0xaac2f7c8ae0bfaba (17) eap: Previous EAP request found for state 0xaac2f7c8ae0bfaba, released from the list (17) eap: Peer sent packet with method EAP TLS (13) (17) eap: Calling submodule eap_tls to process data (17) eap_tls: (TLS) EAP Peer says that the final record size will be 3273 bytes (17) eap_tls: (TLS) EAP Expecting 3 fragments (17) eap_tls: (TLS) EAP Got first TLS fragment (1482 bytes). Peer says more fragments will follow (17) eap_tls: (TLS) EAP ACKing fragment, the peer should send more data. (17) eap: Sending EAP Request (code 1) ID 202 length 6 (17) eap: EAP session adding &reply:State = 0xaac2f7c8af08faba (17) [eap] = handled (17) } # Auth-Type EAP = handled (17) Using Post-Auth-Type Challenge (17) Post-Auth-Type sub-section not found. Ignoring. (17) session-state: Saving cached attributes (17) Framed-MTU = 994 (17) Sent Access-Challenge Id 228 from 10.10.251.2:1812 to 10.225.23.1:59952 length 64 (17) EAP-Message = 0x01ca00060d00 (17) Message-Authenticator = 0x00000000000000000000000000000000 (17) State = 0xaac2f7c8af08fabaed78ca5277b3b026 (17) Finished request Waking up in 3.4 seconds. (18) Received Access-Request Id 229 from 10.225.23.1:59952 to 10.10.251.2:1812 length 1801 (18) User-Name = "host/mh302290.millerextra.com" (18) NAS-IP-Address = 0.0.0.0 (18) NAS-Identifier = "E0-55-3D-89-23-20:vap1" (18) Called-Station-Id = "E2-55-6D-89-23-21:mhstaff" (18) NAS-Port-Type = Wireless-802.11 (18) Service-Type = Framed-User (18) NAS-Port = 1 (18) Calling-Station-Id = "DC-21-5C-C3-72-47" (18) Connect-Info = "CONNECT 54.00 Mbps / 802.11ac / RSSI: 41 / Channel: 44" (18) Acct-Session-Id = "2658296537E87022" (18) Acct-Multi-Session-Id = "998A54E28541EE6C" (18) WLAN-Pairwise-Cipher = 1027076 (18) WLAN-Group-Cipher = 1027076 (18) WLAN-AKM-Suite = 1027073 (18) Framed-MTU = 1400 (18) EAP-Message = 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 (18) State = 0xaac2f7c8af08fabaed78ca5277b3b026 (18) Message-Authenticator = 0x4ab1f39280efc838f54bcfb846c85e1a (18) Restoring &session-state (18) &session-state:Framed-MTU = 994 (18) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/mh-site (18) authorize { (18) policy filter_username { (18) if (&User-Name) { (18) if (&User-Name) -> TRUE (18) if (&User-Name) { (18) if (&User-Name =~ / /) { (18) if (&User-Name =~ / /) -> FALSE (18) if (&User-Name =~ /@[^@]*@/ ) { (18) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (18) if (&User-Name =~ /\.\./ ) { (18) if (&User-Name =~ /\.\./ ) -> FALSE (18) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (18) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (18) if (&User-Name =~ /\.$/) { (18) if (&User-Name =~ /\.$/) -> FALSE (18) if (&User-Name =~ /(a)\./) { (18) if (&User-Name =~ /(a)\./) -> FALSE (18) } # if (&User-Name) = notfound (18) } # policy filter_username = notfound (18) [preprocess] = ok (18) [chap] = noop (18) pap: WARNING: No "known good" password found for the user. Not setting Auth-Type (18) pap: WARNING: Authentication will fail unless a "known good" password is available (18) [pap] = noop (18) eap: Peer sent EAP Response (code 2) ID 202 length 1492 (18) eap: No EAP Start, assuming it's an on-going EAP conversation (18) [eap] = updated (18) [files] = noop (18) [expiration] = noop (18) [logintime] = noop (18) policy rewrite_calling_station_id { (18) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (18) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) -> TRUE (18) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (18) update request { (18) EXPAND %{tolower:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (18) --> dc-21-5c-c3-72-47 (18) &Calling-Station-Id := dc-21-5c-c3-72-47 (18) } # update request = noop (18) [updated] = updated (18) } # if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) = updated (18) ... skipping else: Preceding "if" was taken (18) } # policy rewrite_calling_station_id = updated (18) if (&User-Name =~ /^host\/(.*)$/) { (18) if (&User-Name =~ /^host\/(.*)$/) -> TRUE (18) if (&User-Name =~ /^host\/(.*)$/) { (18) update request { (18) EXPAND %{1} (18) --> mh302290.millerextra.com (18) &Cert-CN := mh302290.millerextra.com (18) } # update request = noop (18) } # if (&User-Name =~ /^host\/(.*)$/) = noop (18) if (!EAP-Message) { (18) if (!EAP-Message) -> FALSE (18) else { (18) eap: Peer sent EAP Response (code 2) ID 202 length 1492 (18) eap: No EAP Start, assuming it's an on-going EAP conversation (18) [eap] = updated (18) } # else = updated (18) } # authorize = updated (18) Found Auth-Type = eap (18) Found Auth-Type = eap (18) ERROR: Warning: Found 2 auth-types on request for user 'host/mh302290.millerextra.com' (18) # Executing group from file /etc/freeradius/3.0/sites-enabled/mh-site (18) Auth-Type EAP { (18) eap: Expiring EAP session with state 0xdd940e92d9030376 (18) eap: Finished EAP session with state 0xaac2f7c8af08faba (18) eap: Previous EAP request found for state 0xaac2f7c8af08faba, released from the list (18) eap: Peer sent packet with method EAP TLS (13) (18) eap: Calling submodule eap_tls to process data (18) eap_tls: (TLS) EAP Got additional fragment (1486 bytes). Peer says more fragments will follow (18) eap_tls: (TLS) EAP ACKing fragment, the peer should send more data. (18) eap: Sending EAP Request (code 1) ID 203 length 6 (18) eap: EAP session adding &reply:State = 0xaac2f7c8ac09faba (18) [eap] = handled (18) } # Auth-Type EAP = handled (18) Using Post-Auth-Type Challenge (18) Post-Auth-Type sub-section not found. Ignoring. (18) session-state: Saving cached attributes (18) Framed-MTU = 994 (18) Sent Access-Challenge Id 229 from 10.10.251.2:1812 to 10.225.23.1:59952 length 64 (18) EAP-Message = 0x01cb00060d00 (18) Message-Authenticator = 0x00000000000000000000000000000000 (18) State = 0xaac2f7c8ac09fabaed78ca5277b3b026 (18) Finished request Waking up in 3.3 seconds. (19) Received Access-Request Id 230 from 10.225.23.1:59952 to 10.10.251.2:1812 length 612 (19) User-Name = "host/mh302290.millerextra.com" (19) NAS-IP-Address = 0.0.0.0 (19) NAS-Identifier = "E0-55-3D-89-23-20:vap1" (19) Called-Station-Id = "E2-55-6D-89-23-21:mhstaff" (19) NAS-Port-Type = Wireless-802.11 (19) Service-Type = Framed-User (19) NAS-Port = 1 (19) Calling-Station-Id = "DC-21-5C-C3-72-47" (19) Connect-Info = "CONNECT 54.00 Mbps / 802.11ac / RSSI: 41 / Channel: 44" (19) Acct-Session-Id = "2658296537E87022" (19) Acct-Multi-Session-Id = "998A54E28541EE6C" (19) WLAN-Pairwise-Cipher = 1027076 (19) WLAN-Group-Cipher = 1027076 (19) WLAN-AKM-Suite = 1027073 (19) Framed-MTU = 1400 (19) EAP-Message = 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 (19) State = 0xaac2f7c8ac09fabaed78ca5277b3b026 (19) Message-Authenticator = 0x9ad0e6dd3ad8d8bfe60fcbf1d4877c4e (19) Restoring &session-state (19) &session-state:Framed-MTU = 994 (19) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/mh-site (19) authorize { (19) policy filter_username { (19) if (&User-Name) { (19) if (&User-Name) -> TRUE (19) if (&User-Name) { (19) if (&User-Name =~ / /) { (19) if (&User-Name =~ / /) -> FALSE (19) if (&User-Name =~ /@[^@]*@/ ) { (19) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (19) if (&User-Name =~ /\.\./ ) { (19) if (&User-Name =~ /\.\./ ) -> FALSE (19) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (19) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (19) if (&User-Name =~ /\.$/) { (19) if (&User-Name =~ /\.$/) -> FALSE (19) if (&User-Name =~ /(a)\./) { (19) if (&User-Name =~ /(a)\./) -> FALSE (19) } # if (&User-Name) = notfound (19) } # policy filter_username = notfound (19) [preprocess] = ok (19) [chap] = noop (19) pap: WARNING: No "known good" password found for the user. Not setting Auth-Type (19) pap: WARNING: Authentication will fail unless a "known good" password is available (19) [pap] = noop (19) eap: Peer sent EAP Response (code 2) ID 203 length 311 (19) eap: No EAP Start, assuming it's an on-going EAP conversation (19) [eap] = updated (19) [files] = noop (19) [expiration] = noop (19) [logintime] = noop (19) policy rewrite_calling_station_id { (19) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (19) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) -> TRUE (19) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (19) update request { (19) EXPAND %{tolower:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (19) --> dc-21-5c-c3-72-47 (19) &Calling-Station-Id := dc-21-5c-c3-72-47 (19) } # update request = noop (19) [updated] = updated (19) } # if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) = updated (19) ... skipping else: Preceding "if" was taken (19) } # policy rewrite_calling_station_id = updated (19) if (&User-Name =~ /^host\/(.*)$/) { (19) if (&User-Name =~ /^host\/(.*)$/) -> TRUE (19) if (&User-Name =~ /^host\/(.*)$/) { (19) update request { (19) EXPAND %{1} (19) --> mh302290.millerextra.com (19) &Cert-CN := mh302290.millerextra.com (19) } # update request = noop (19) } # if (&User-Name =~ /^host\/(.*)$/) = noop (19) if (!EAP-Message) { (19) if (!EAP-Message) -> FALSE (19) else { (19) eap: Peer sent EAP Response (code 2) ID 203 length 311 (19) eap: No EAP Start, assuming it's an on-going EAP conversation (19) [eap] = updated (19) } # else = updated (19) } # authorize = updated (19) Found Auth-Type = eap (19) Found Auth-Type = eap (19) ERROR: Warning: Found 2 auth-types on request for user 'host/mh302290.millerextra.com' (19) # Executing group from file /etc/freeradius/3.0/sites-enabled/mh-site (19) Auth-Type EAP { (19) eap: Expiring EAP session with state 0xdd940e92d9030376 (19) eap: Finished EAP session with state 0xaac2f7c8ac09faba (19) eap: Previous EAP request found for state 0xaac2f7c8ac09faba, released from the list (19) eap: Peer sent packet with method EAP TLS (13) (19) eap: Calling submodule eap_tls to process data (19) eap_tls: (TLS) EAP Got final fragment (305 bytes) (19) eap_tls: (TLS) EAP Done initial handshake (19) eap_tls: (TLS) Handshake state - Server SSLv3/TLS write server done (19) eap_tls: (TLS) recv TLS 1.2 Handshake, Certificate (19) eap_tls: (TLS) Creating attributes from TLS-Client-Cert-Serial certificate (19) eap_tls: (TLS) Creating attributes from server certificate (19) eap_tls: TLS-Cert-Expiration := "360203235800Z" (19) eap_tls: TLS-Cert-Valid-Since := "111215110200Z" (19) eap_tls: TLS-Cert-Subject := "/C=GB/ST=Edinburgh/L=Edinburgh/O=Miller Group Ltd/OU=Group IT/CN=Intermediate CA" (19) eap_tls: TLS-Cert-Issuer := "/O=MG_TREE/OU=Organizational CA" (19) eap_tls: TLS-Cert-Common-Name := "Intermediate CA" (19) eap_tls: (TLS) Creating attributes from client certificate (19) eap_tls: TLS-Client-Cert-Serial := "517b" (19) eap_tls: TLS-Client-Cert-Expiration := "380602104250Z" (19) eap_tls: TLS-Client-Cert-Valid-Since := "180607104250Z" (19) eap_tls: TLS-Client-Cert-Subject := "/C=GB/ST=Edinburgh/L=Edinburgh/O=Miller Group Ltd/OU=Group IT/CN=mh302290.millerextra.com" (19) eap_tls: TLS-Client-Cert-Issuer := "/C=GB/ST=Edinburgh/L=Edinburgh/O=Miller Group Ltd/OU=Group IT/CN=Intermediate CA" (19) eap_tls: TLS-Client-Cert-Common-Name := "mh302290.millerextra.com" (19) eap_tls: TLS-Client-Cert-X509v3-Extended-Key-Usage += "TLS Web Client Authentication" (19) eap_tls: TLS-Client-Cert-X509v3-Extended-Key-Usage-OID += "1.3.6.1.5.5.7.3.2" Certificate chain - 1 cert(s) untrusted (TLS) untrusted certificate with depth [1] subject name /C=GB/ST=Edinburgh/L=Edinburgh/O=Miller Group Ltd/OU=Group IT/CN=Intermediate CA (TLS) untrusted certificate with depth [0] subject name /C=GB/ST=Edinburgh/L=Edinburgh/O=Miller Group Ltd/OU=Group IT/CN=mh302290.millerextra.com (19) eap_tls: EXPAND %{%{Cert-CN}:-%{User-Name}} (19) eap_tls: --> mh302290.millerextra.com (19) eap_tls: checking certificate CN (mh302290.millerextra.com) with xlat'ed value (mh302290.millerextra.com) (19) eap_tls: (TLS) Handshake state - Server SSLv3/TLS read client certificate (19) eap_tls: (TLS) recv TLS 1.2 Handshake, ClientKeyExchange (19) eap_tls: (TLS) Handshake state - Server SSLv3/TLS read client key exchange (19) eap_tls: (TLS) recv TLS 1.2 Handshake, CertificateVerify (19) eap_tls: (TLS) Handshake state - Server SSLv3/TLS read certificate verify (19) eap_tls: (TLS) Handshake state - Server SSLv3/TLS read change cipher spec (19) eap_tls: (TLS) recv TLS 1.2 Handshake, Finished (19) eap_tls: (TLS) Handshake state - Server SSLv3/TLS read finished (19) eap_tls: (TLS) send TLS 1.2 ChangeCipherSpec (19) eap_tls: (TLS) Handshake state - Server SSLv3/TLS write change cipher spec (19) eap_tls: (TLS) send TLS 1.2 Handshake, Finished (19) eap_tls: (TLS) Handshake state - Server SSLv3/TLS write finished (19) eap_tls: (TLS) Handshake state - SSL negotiation finished successfully (19) eap_tls: (TLS) Connection Established (19) eap_tls: TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (19) eap_tls: TLS-Session-Version = "TLS 1.2" (19) eap: Sending EAP Request (code 1) ID 204 length 61 (19) eap: EAP session adding &reply:State = 0xaac2f7c8ad0efaba (19) [eap] = handled (19) } # Auth-Type EAP = handled (19) Using Post-Auth-Type Challenge (19) Post-Auth-Type sub-section not found. Ignoring. (19) session-state: Saving cached attributes (19) Framed-MTU = 994 (19) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (19) TLS-Session-Version = "TLS 1.2" (19) Sent Access-Challenge Id 230 from 10.10.251.2:1812 to 10.225.23.1:59952 length 119 (19) EAP-Message = 0x01cc003d0d800000003314030300010116030300289fb66e19904cea77ce871c25754eba9282fba3ca777ca309c7283b774b8249df0d1ee5035915786f (19) Message-Authenticator = 0x00000000000000000000000000000000 (19) State = 0xaac2f7c8ad0efabaed78ca5277b3b026 (19) Finished request Waking up in 3.3 seconds. (20) Received Access-Request Id 231 from 10.225.23.1:59952 to 10.10.251.2:1812 length 305 (20) User-Name = "host/mh302290.millerextra.com" (20) NAS-IP-Address = 0.0.0.0 (20) NAS-Identifier = "E0-55-3D-89-23-20:vap1" (20) Called-Station-Id = "E2-55-6D-89-23-21:mhstaff" (20) NAS-Port-Type = Wireless-802.11 (20) Service-Type = Framed-User (20) NAS-Port = 1 (20) Calling-Station-Id = "DC-21-5C-C3-72-47" (20) Connect-Info = "CONNECT 54.00 Mbps / 802.11ac / RSSI: 41 / Channel: 44" (20) Acct-Session-Id = "2658296537E87022" (20) Acct-Multi-Session-Id = "998A54E28541EE6C" (20) WLAN-Pairwise-Cipher = 1027076 (20) WLAN-Group-Cipher = 1027076 (20) WLAN-AKM-Suite = 1027073 (20) Framed-MTU = 1400 (20) EAP-Message = 0x02cc00060d00 (20) State = 0xaac2f7c8ad0efabaed78ca5277b3b026 (20) Message-Authenticator = 0xf00b72196a381c05f74df8e1bae5bc7c (20) Restoring &session-state (20) &session-state:Framed-MTU = 994 (20) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (20) &session-state:TLS-Session-Version = "TLS 1.2" (20) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/mh-site (20) authorize { (20) policy filter_username { (20) if (&User-Name) { (20) if (&User-Name) -> TRUE (20) if (&User-Name) { (20) if (&User-Name =~ / /) { (20) if (&User-Name =~ / /) -> FALSE (20) if (&User-Name =~ /@[^@]*@/ ) { (20) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (20) if (&User-Name =~ /\.\./ ) { (20) if (&User-Name =~ /\.\./ ) -> FALSE (20) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (20) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (20) if (&User-Name =~ /\.$/) { (20) if (&User-Name =~ /\.$/) -> FALSE (20) if (&User-Name =~ /(a)\./) { (20) if (&User-Name =~ /(a)\./) -> FALSE (20) } # if (&User-Name) = notfound (20) } # policy filter_username = notfound (20) [preprocess] = ok (20) [chap] = noop (20) pap: WARNING: No "known good" password found for the user. Not setting Auth-Type (20) pap: WARNING: Authentication will fail unless a "known good" password is available (20) [pap] = noop (20) eap: Peer sent EAP Response (code 2) ID 204 length 6 (20) eap: No EAP Start, assuming it's an on-going EAP conversation (20) [eap] = updated (20) [files] = noop (20) [expiration] = noop (20) [logintime] = noop (20) policy rewrite_calling_station_id { (20) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (20) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) -> TRUE (20) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (20) update request { (20) EXPAND %{tolower:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (20) --> dc-21-5c-c3-72-47 (20) &Calling-Station-Id := dc-21-5c-c3-72-47 (20) } # update request = noop (20) [updated] = updated (20) } # if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) = updated (20) ... skipping else: Preceding "if" was taken (20) } # policy rewrite_calling_station_id = updated (20) if (&User-Name =~ /^host\/(.*)$/) { (20) if (&User-Name =~ /^host\/(.*)$/) -> TRUE (20) if (&User-Name =~ /^host\/(.*)$/) { (20) update request { (20) EXPAND %{1} (20) --> mh302290.millerextra.com (20) &Cert-CN := mh302290.millerextra.com (20) } # update request = noop (20) } # if (&User-Name =~ /^host\/(.*)$/) = noop (20) if (!EAP-Message) { (20) if (!EAP-Message) -> FALSE (20) else { (20) eap: Peer sent EAP Response (code 2) ID 204 length 6 (20) eap: No EAP Start, assuming it's an on-going EAP conversation (20) [eap] = updated (20) } # else = updated (20) } # authorize = updated (20) Found Auth-Type = eap (20) Found Auth-Type = eap (20) ERROR: Warning: Found 2 auth-types on request for user 'host/mh302290.millerextra.com' (20) # Executing group from file /etc/freeradius/3.0/sites-enabled/mh-site (20) Auth-Type EAP { (20) eap: Expiring EAP session with state 0xdd940e92d9030376 (20) eap: Finished EAP session with state 0xaac2f7c8ad0efaba (20) eap: Previous EAP request found for state 0xaac2f7c8ad0efaba, released from the list (20) eap: Peer sent packet with method EAP TLS (13) (20) eap: Calling submodule eap_tls to process data (20) eap_tls: (TLS) Peer ACKed our handshake fragment. handshake is finished (20) eap: Sending EAP Success (code 3) ID 204 length 4 (20) eap: Freeing handler (20) [eap] = ok (20) } # Auth-Type EAP = ok (20) Login OK: [host/mh302290.millerextra.com] (from client MWAN-10.225.23.1 port 1 cli dc-21-5c-c3-72-47) (20) Sent Access-Accept Id 231 from 10.10.251.2:1812 to 10.225.23.1:59952 length 191 (20) MS-MPPE-Recv-Key = 0x5174a1fa6f9c95751d175f374296fbf6f2601dd7812286091c0a9299caa1d901 (20) MS-MPPE-Send-Key = 0x17b4077c5d99af4f534b6f6318b07a9eb29945b6a3221eced94cbcbf8a8011c1 (20) EAP-Message = 0x03cc0004 (20) Message-Authenticator = 0x00000000000000000000000000000000 (20) User-Name = "host/mh302290.millerextra.com" (20) Finished request Waking up in 3.2 seconds. (21) Received Access-Request Id 197 from 10.20.80.11:3279 to 10.10.251.2:1812 length 219 (21) User-Name = "b4-45-06-c1-79-98" (21) User-Password = "b4-45-06-c1-79-98" (21) NAS-IP-Address = 10.20.80.11 (21) NAS-Identifier = "ed-sw-1f01" (21) NAS-Port = 16863283 (21) NAS-Port-Id = "slot=1;subslot=0;port=21;vlanid=51" (21) NAS-Port-Type = Ethernet (21) Service-Type = Call-Check (21) Framed-Protocol = PPP (21) Calling-Station-Id = "B4-45-06-C1-79-98" (21) Acct-Session-Id = "122070415033a1a010" (21) Attr-26.43.230 = 0x4769676162697445746865726e6574312f302f3231 (21) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/mh-site (21) authorize { (21) policy filter_username { (21) if (&User-Name) { (21) if (&User-Name) -> TRUE (21) if (&User-Name) { (21) if (&User-Name =~ / /) { (21) if (&User-Name =~ / /) -> FALSE (21) if (&User-Name =~ /@[^@]*@/ ) { (21) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (21) if (&User-Name =~ /\.\./ ) { (21) if (&User-Name =~ /\.\./ ) -> FALSE (21) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (21) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (21) if (&User-Name =~ /\.$/) { (21) if (&User-Name =~ /\.$/) -> FALSE (21) if (&User-Name =~ /(a)\./) { (21) if (&User-Name =~ /(a)\./) -> FALSE (21) } # if (&User-Name) = notfound (21) } # policy filter_username = notfound (21) [preprocess] = ok (21) [chap] = noop (21) pap: WARNING: No "known good" password found for the user. Not setting Auth-Type (21) pap: WARNING: Authentication will fail unless a "known good" password is available (21) [pap] = noop (21) eap: No EAP-Message, not doing EAP (21) [eap] = noop (21) files: users: Matched entry DEFAULT at line 167 (21) [files] = ok (21) [expiration] = noop (21) [logintime] = noop (21) policy rewrite_calling_station_id { (21) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (21) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) -> TRUE (21) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) { (21) update request { (21) EXPAND %{tolower:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (21) --> b4-45-06-c1-79-98 (21) &Calling-Station-Id := b4-45-06-c1-79-98 (21) } # update request = noop (21) [updated] = updated (21) } # if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) = updated (21) ... skipping else: Preceding "if" was taken (21) } # policy rewrite_calling_station_id = updated (21) if (&User-Name =~ /^host\/(.*)$/) { (21) if (&User-Name =~ /^host\/(.*)$/) -> FALSE (21) if (!EAP-Message) { (21) if (!EAP-Message) -> TRUE (21) if (!EAP-Message) { (21) authorized_macs: EXPAND %{Calling-Station-ID} (21) authorized_macs: --> b4-45-06-c1-79-98 (21) [authorized_macs] = noop (21) if (!ok) { (21) if (!ok) -> TRUE (21) if (!ok) { (21) [reject] = reject (21) } # if (!ok) = reject (21) } # if (!EAP-Message) = reject (21) } # authorize = reject (21) Invalid user: [b4-45-06-c1-79-98] (from client ed-sw-1f01 port 16863283 cli b4-45-06-c1-79-98) (21) Using Post-Auth-Type Reject (21) Post-Auth-Type sub-section not found. Ignoring. (21) Login incorrect: [b4-45-06-c1-79-98] (from client ed-sw-1f01 port 16863283 cli b4-45-06-c1-79-98) (21) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (21) Sending delayed response (21) Sent Access-Reject Id 197 from 10.10.251.2:1812 to 10.20.80.11:3279 length 32 (21) Framed-Protocol = PPP (21) Framed-Compression = Van-Jacobson-TCP-IP Waking up in 0.3 seconds. (0) Cleaning up request packet ID 34 with timestamp +0 due to cleanup_delay was reached ________________________________ Miller Homes Limited Registered in Scotland - SC255429 2 Lochside View, Edinburgh Park, Edinburgh, EH12 9DH Disclaimer: The Information in this e-mail is confidential and for use by the addressee(s) only. It may also be privileged. If you are not the intended recipient please notify us immediately on +44 (0) 870 336 5000 and delete the message from your computer: you may not copy or forward it, or use or disclose its contents to any other person. We do not accept any liability or responsibility for: (1) changes made to this email after it was sent, or (2) viruses transmitted through this email or any attachment. Miller Homes Limited <https://www.millerhomes.co.uk>

3 3

SAML auth backend?
by Michael Schwartzkopff 09 Aug '22

09 Aug '22

Hi, we have the task to authenticate network access against a Azure Active Directory. I have seen some solutions. So basically it should be possible to use the Azure AD Directory Services (LDAP). Is there an easier way to use the SAML REST API of Azure AD? Perhaps not in the recent REST module of FR, but in the upcoming, improved module? Mit freundlichen Grüßen, -- [*] sys4 AG https://sys4.de, +49 (89) 30 90 46 64 Schleißheimer Straße 26/MG,80333 München Sitz der Gesellschaft: München, Amtsgericht München: HRB 199263 Vorstand: Patrick Ben Koetter, Marc Schiffbauer, Wolfgang Stief Aufsichtsratsvorsitzender: Florian Kirstein

2 1

(no subject)
by Eric Nguyen 09 Aug '22

09 Aug '22

Hello, Does Freeradius 3.2.0 fully support MACSEC/dot1x? The only information I've found is that the following snippet in sites-available/default needs to be uncommented. Are there any additional RADIUS AV pairs I need to configure to make it work with Macsec/dot1x on Cisco devices? # MacSEC requires the use of EAP-Key-Name. However, we don't # want to send it for all EAP sessions. Therefore, the EAP # modules put required data into the EAP-Session-Id attribute. # This attribute is never put into a request or reply packet. # # Uncomment the next few lines to copy the required data into # the EAP-Key-Name attribute if (&reply:EAP-Session-Id) { update reply { EAP-Key-Name := &reply:EAP-Session-Id } } Thanks a lot.

2 2